ALSA: emu10k1: pull in some register definitions from kX-project

For documentation purposes and later use.

Some pre-existing but (mostly) unused definitions were renamed for
consistency.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143903-6-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: remove some bogus defines

Firstly, remove the FXWC_* defines - the comment on FXWC implies that
the relevant defines are the (A_)EXTOUT_* ones. It's unclear where this
came from - it was in the initial ALSA import, but neither the driver
from Creative nor kX-project have these defines.

Secondly, remove A_HR, which made plain no sense (was unused, and
clashed with FXRT). Amends commit cbb7d8f9b7b ("emu10k1: Update
registers defines for the Audigy 2/emu10k2.5").

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143903-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: eliminate some unused defines

One might be mislead to think that these mean anything.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143903-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: fix lineup of EMU_HANA_* defines

The bit values are supposed to be internally indented by one step
relative to the register addresses.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143903-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: comment updates

Move comments to better locations, de-duplicate, fix/remove incorrect/
outdated ones, add new ones, and unify spacing somewhat.

While at it, also add testing credits for Jonathan Dowland (SB Live!
Platinum) and myself (E-MU 0404b).

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422161021.1143903-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: fix snd_emu1010_fpga_read() input masking for rev2 cards

Unlike the Alice2 chips used on 1st generation E-MU cards, the
Tina/Tina2 chips used on the 2nd gen cards have only six GPIN pins,
which means that we need to use a smaller mask. Failure to do so would
falsify the read data if the FPGA tried to raise an IRQ right at that
moment. This wasn't a problem so far, as we didn't actually enable FPGA
IRQs, but that's going to change soon.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422132430.1057490-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: remove unused emu->pcm_playback_efx_substream field

Amends historic commit 27ae958cf6 ("emu10k1 driver - add multichannel
device hw:x,3 [2-8/8]").

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422132430.1057468-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: remove unused `resume` parameter from snd_emu10k1_init()

This was unnecessarily added in commit 09668b441da ("emu10k1 - Add PM
support").

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422132430.1057468-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: minor optimizations

- In snd_emu10k1_look_for_ctl(), evaluate the cheap condition first
- In _snd_emu10k1_{audigy_,}init_efx(), don't use expensive bit setting
  loops to fill arrays
- In snd_emu_proc_ptr_reg_read(), remove useless condition - iobase can
  be only 0 or 0x20

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230422121519.1052813-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: remove remaining cruft from snd_emu10k1_emu1010_init()

Various redundant FPGA writes which were presumably also cargo-culted
from the Windows driver.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005539-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: remove apparently pointless EMU_HANA_OPTION_CARDS reads

These seem to be another instance of cargo-culting from the Windows
driver. It presumably queries the register to decide about the followup
actions, but we don't do that.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005539-6-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: remove apparently pointless FPGA reads

These seem to be simply cargo-culted from the Windows driver's behavior.
However, the original reason were presumably read-modify-write cycles,
which we don't do.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005539-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: stop doing weird things with HCFG in snd_emu10k1_emu1010_init()

This doesn't do anything snd_emu10k1_init() wouldn't do later, and none
of the things it does seem relevant for the function itself (which is
pretty much about setting up the FPGA). It was probably a Windows
driver behavior cargo-culting artifact.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005539-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: fix access to Audigy GPIO port

As the register definition clearly states, this is a 16-bit register,
yet we did all accesses as 32-bit. The writes in particular would have
the potential to clear the TIMER register (depending on how the bus/card
actually handles the too long writes).

This commit also introduces a separate define A_GPIO which aliases
A_IOCFG, which better reflects the distinct usage on E-MU cards.
This is done in the same commit to keep the churn down, as we're
touching all involved lines anyway.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005539-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: properly assert E-MU FPGA access constaints

Assert the validity of the registers and values, as them being out of
range would indicate an error in the driver. Consequently, don't bother
returning error codes; they were ignored everywhere anyway.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005539-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: clean up P16V part somewhat

Detach it better from the main PCM driver, which it really doesn't have
much in common with.

In particular, this moves the interrupt handler implementation into
p16v.c, and makes it access the substream runtime status more directly,
so it doesn't need to abuse structs snd_emu10k1_pcm and
snd_emu10k1_voice any more.

We don't need private pcm runtime data at all, as the only thing it was
used for (except the back-link to the substream) was the `running` flag.
So store that directly in runtime->private_data.

This somewhat radical strip-down shows that this driver contains some
complexity that was never actually utilized. I suppose the right way to
fully utilize the hardware in a simple way would be introducing more
substreams. This wouldn't require any of the removed code.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005452-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: remove unused snd_emu10k1_voice.emu field

It was written, but never read from. Its value is available via the epcm
field.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005452-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: remove obsolete card type variable and defines

The use of the variable was removed in commit 2b637da5a1b ("clean up
card features"). That commit also broke user space (the ioctl
structure), at which point the defines became meaningless, so I don't
think purging them is a problem.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005452-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: drop redundant snd_emu10k1_efx_playback_pointer()

It's just an (outdated) copy of snd_emu10k1_playback_pointer().

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005452-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: drop redundant snd_emu10k1_efx_playback_hw_free()

Or actually, replace snd_emu10k1_playback_hw_free() with it, as that is
a subset.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005452-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: clarify various fx8010.*_mask fields

extin_mask and extout_mask are used only by the SbLive! microcode, so
they have no effect on Audigy.

Eliminate fxbus_mask entirely, as it wasn't actually used for anything.

As a drive-by, remove the pointless pad1 field from struct
snd_emu10k1_fx8010 - it is not visible to user space, so it has no
binary compatibility constraints.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421141006.1005509-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Rate limit usb_set_interface error reporting

When an error occurs during USB disconnection sometimes things can go
wrong as endpoint_set_interface may end up being called repeatedly. For
example:

% dmesg --notime | grep 'usb 3-7.1.4' | sort | uniq -c | head -2
   3069 usb 3-7.1.4: 1:1: usb_set_interface failed (-19)
    908 usb 3-7.1.4: 1:1: usb_set_interface failed (-71)

In my case, there sometimes are hundreds of these usb_set_interface
failure messages a second when I disconnect the hub that has my USB
audio device.

These messages can take a huge amount of the kmsg ringbuffer and don't
provide any extra information over the previous ones, so ratelimit them.

Signed-off-by: Chris Down <chris@chrisdown.name>
Link: https://lore.kernel.org/r/ZEKf8UYBYa1h4JWR@chrisdown.name
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: docs: writing-an-alsa-driver.rst: polishing

- Update some outdated info
- Language fixes
- Whitespace/formatting fixes
- Prefer attached over stand-alone '::'

[ dropped a trailing white space in the patch -- tiwai ]

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421112751.990244-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: pcm: rewrite snd_pcm_playback_silence()

The auto-silencer supports two modes: "thresholded" to fill up "just
enough", and "top-up" to fill up "as much as possible". The two modes
used rather distinct code paths, which this patch unifies. The only
remaining distinction is how much we actually want to fill.

This fixes a bug in thresholded mode, where we failed to use new_hw_ptr,
resulting in under-fill.

Top-up mode is now more well-behaved and much easier to understand in
corner cases.

This also updates comments in the proximity of silencing-related data
structures.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230420113324.877164-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: Use of_property_read_bool() for boolean properties

It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to to of_property_read_bool().

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144734.1546587-1-robh@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: ppc/tumbler: Use of_property_present() for testing DT property presence

It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144733.1546500-1-robh@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda/hdmi: Remove some dead code

These snd_BUG_ON() can never trigger, so just remove them to save a few
LoC.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/91a31341f32d493bcc6c4515178ce0755ac1aa70.1681710069.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda: LNL: add HD Audio PCI ID

Add HD Audio PCI ID for Intel Lunarlake platform.

Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230406152500.15104-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: pcm: fix wait_time calculations

... in wait_for_avail() and snd_pcm_drain().

t was calculated in seconds, so it would be pretty much always zero, to
be subsequently de-facto ignored due to being max(t, 10)'d. And then it
(i.e., 10) would be treated as secs, which doesn't seem right.

However, fixing it to properly calculate msecs would potentially cause
timeouts when using twice the period size for the default timeout (which
seems reasonable to me), so instead use the buffer size plus 10 percent
to be on the safe side ... but that still seems insufficient, presumably
because the hardware typically needs a moment to fire up. To compensate
for this, we up the minimal timeout to 100ms, which is still two orders
of magnitude less than the bogus minimum.

substream->wait_time was also misinterpreted as jiffies, despite being
documented as being in msecs. Only the soc/sof driver sets it - to 500,
which looks very much like msecs were intended.

Speaking of which, shouldn't snd_pcm_drain() also use substream->
wait_time?

As a drive-by, make the debug messages on timeout less confusing.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230405201219.2197774-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: document that struct __snd_pcm_mmap_control64 is messed up

I'm not the first one to run into this, see e.g.
https://lore.kernel.org/all/29QBMJU8DE71E.2YZSH8IHT5HMH@mforney.org/

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230406132521.2252019-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: documentation updates

- Less misinformation
- Language and whitespace fixups

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230405201220.2197893-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: emu10k1: update label & help in config system

The newer E-MU cards weren't mentioned at all.

The "partially supported" is removed ahead of it becoming mostly untrue.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230405201220.2197908-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: ac97: Define dummy functions for snd_ac97_suspend() and resume()

For allowing the build without CONFIG_PM, add definitions of dummy
functions for snd_ac97_suspend() and snd_ac97_resume() without
CONFIG_PM, too.

Link: https://lore.kernel.org/r/20230330132847.12882-1-tiwai@suse.de
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Tasos Sahanidis <tasos@tasossah.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: asihpi: remove unused loop_count variable

clang with W=1 reports
sound/pci/asihpi/hpi6000.c:1256:6: error: variable
  'loop_count' set but not used [-Werror,-Wunused-but-set-variable]
        u32 loop_count = 0;
            ^
This variable is not used so remove it.

Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230326205712.1358918-1-trix@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: ymfpci: Use register macro in place of integer literal

The macro for said register already exists, so just use it, to make the
code more readable.

Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20230329043918.179352-1-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: ymfpci: Use u16 consistently for old_legacy_ctrl

There's no need to switch between unsigned short and u16, especially since
all the functions that end up using old_legacy_ctrl specify u16 anyway.

Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20230329043627.178899-1-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: ymfpci: Store additional legacy registers on suspend

YMF744 and newer store the base IO ports in separate PCI config registers.

Since these registers were not restored, when set to a non-default value,
features that rely on them (FM, MPU401, gameport) were not functional
after restore, as their respective IO ports were reset to their defaults.

Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20230329041440.177363-5-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: ymfpci: Store saved legacy registers in an array

In preparation for storing more than two legacy PCI registers, the
existing ones are moved into a new array.

Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20230329041440.177363-4-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: ymfpci: Move allocation of saved registers to struct snd_ymfpci

The registers were previously allocated when CONFIG_PM_SLEEP was set,
however this only saved an insignificant amount of memory otherwise.

Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20230329041440.177363-3-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: ymfpci: Switch to DEFINE_SIMPLE_DEV_PM_OPS()

Since commit 1a3c7bb08826 ("PM: core: Add new *_PM_OPS macros, deprecate
old ones") SIMPLE_DEV_PM_OPS has been marked deprecated.

The intent is to remove CONFIG_PM_SLEEP guards for PM callbacks. As such
the ifdefs are now removed.

Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20230329041440.177363-2-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: ymfpci: Add error messages for abritrary IO ports on older chips

As an end user, it can be confusing to request an arbitrary IO port be
used only to find out that it doesn't work without an obvious reason,
especially since /sys/module/snd_ymfpci/parameters/{fm,joystick,mpu}_port
indicate 0 after the module has been loaded.

In my case, I was unaware that the YMF724 did not support such usage, and
thus ended up spending time attempting to debug the issue.

Now, when a user attempts to request an IO port that isn't supported by
the hardware, the following message is printed:

[   25.549530] snd_ymfpci 0000:06:05.0: The Yamaha DS-1 (YMF724F) does not support arbitrary IO ports for FM (requested 0x1234)

Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20230329034204.171901-1-tasos@tasossah.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: docs: A few more words for PCM XRUN handling and stream locks

Enhance the documents about the PCM, missing descriptions for a couple
of helpers like snd_pcm_period_elapsed_under_stream_lock() and
snd_pcm_stop_xrun().

Link: https://lore.kernel.org/r/20230323065237.5062-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: docs: Add description about ack callback -EPIPE error handling

Add a brief description about the newly added behavior of the PCM ack
callback with -EPIPE error.

Link: https://lore.kernel.org/r/20230323065237.5062-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: pcm: Improved XRUN handling for indirect PCM helpers

As PCM ack callback may handle the XRUN situation gracefully now,
change the indirect PCM helpers to give a proper error (-EPIPE).
Also, change the pointer callback helpers to deal with the XRUN error
properly, too.

This requires the PCM core change by the commit 8c721c53dda5
("ALSA: usb-audio: Fix recursive locking at XRUN during syncing").

Link: https://lore.kernel.org/r/20230323065237.5062-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'for-linus' into for-next

Back-merge of 6.3 devel branch for further changes of PCM and
documentation.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Fix regression on detection of Roland VS-100

It's been reported that the recent kernel can't probe the PCM devices
on Roland VS-100 properly, and it turned out to be a regression by the
recent addition of the bit shift range check for the format bits.
In the old code, we just did bit-shift and it resulted in zero, which
is then corrected to the standard PCM format, while the new code
explicitly returns an error in such a case.

For addressing the regression, relax the check and fallback to the
standard PCM type (with the info output).

Fixes: 43d5ca88dfcd ("ALSA: usb-audio: Fix potential out-of-bounds shift")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217084
Link: https://lore.kernel.org/r/20230324075005.19403-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hdspm: remove unused copy_u32_le function

clang with W=1 reports
sound/pci/rme9652/hdspm.c:6149:19: error: unused function
  'copy_u32_le' [-Werror,-Wunused-function]
static inline int copy_u32_le(void __user *dest, void __iomem *src)
                  ^
This function is not used so remove it.

Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230323202713.2637150-1-trix@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

kselftest/alsa - pcm-test: Don't include diagnostic message in test name

When reporting errors or skips we currently include the diagnostic message
indicating why we're failing or skipping. This isn't ideal since KTAP
defines the entire print as the test name, so if there's an error then test
systems won't detect the test as being the same one as a passing test. Move
the diagnostic to a separate ksft_print_msg() to avoid this issue, the test
name part will always be the same for passes, fails and skips and the
diagnostic information is still displayed.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230323-alsa-pcm-test-names-v1-1-8be67a8885ff@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

kselftest/alsa - mixer-test: Log values associated with event issues

While it is common for driver bugs with events to apply to all events there
are some issues which only trigger for specific values. Understanding these
is easier if we know what we were trying to do when configuring the control
so add logging for the specific values involved in the spurious event.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230322-alsa-mixer-event-values-v1-1-78189fcf6655@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda/realtek: Fix support for Dell Precision 3260

Unfortunately, in commit 5911d78fabbb a wrong codec patch was selected.
The model=alc283-dac-wcaps is equivalent to ALC283_FIXUP_CHROME_BOOK not
ALC295_FIXUP_CHROME_BOOK.

Fixes: 5911d78fabbb ("ALSA: hda/realtek: Improve support for Dell Precision 3260")
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230322153404.386473-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: Fix recursive locking at XRUN during syncing

The recent support of low latency playback in USB-audio driver made
the snd_usb_queue_pending_output_urbs() function to be called via PCM
ack ops.  In the new code path, the function is performed already in
the PCM stream lock.  The problem is that, when an XRUN is detected,
the function calls snd_pcm_xrun() to notify, but snd_pcm_xrun() is
supposed to be called only outside the stream lock.  As a result, it
leads to a deadlock of PCM stream locking.

For avoiding such a recursive locking, this patch adds an additional
check to the code paths in PCM core that call the ack callback; now it
checks the error code from the callback, and if it's -EPIPE, the XRUN
is handled in the PCM core side gracefully.  Along with it, the
USB-audio driver code is changed to follow that, i.e. -EPIPE is
returned instead of the explicit snd_pcm_xrun() call when the function
is performed already in the stream lock.

Fixes: d5f871f89e21 ("ALSA: usb-audio: Improved lowlatency playback support")
Reported-and-tested-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20230317195128.3911155-1-john@metanate.com
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by; Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230320142838.494-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda/conexant: Partial revert of a quirk for Lenovo

The recent commit f83bb2592482 ("ALSA: hda/conexant: Add quirk for
LENOVO 20149 Notebook model") introduced a quirk for the device with
17aa:3977, but this caused a regression on another model (Lenovo
Ideadpad U31) with the very same PCI SSID.  And, through skimming over
the net, it seems that this PCI SSID is used for multiple different
models, so it's no good idea to apply the quirk with the SSID.

Although we may take a different ID check (e.g. the codec SSID instead
of the PCI SSID), unfortunately, the original patch author couldn't
identify the hardware details any longer as the machine was returned,
and we can't develop the further proper fix.

In this patch, instead, we partially revert the change so that the
quirk won't be applied as default for addressing the regression.
Meanwhile, the quirk function itself is kept, and it's now made to be
applicable via the explicit model=lenovo-20149 option.

Fixes: f83bb2592482 ("ALSA: hda/conexant: Add quirk for LENOVO 20149 Notebook model")
Reported-by: Jetro Jormalainen <jje-lxkl@jetro.fi>
Link: https://lore.kernel.org/r/20230308215009.4d3e58a6@mopti
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230320140954.31154-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: ac97: Remove redundant driver match function

If there is no driver match function, the driver core assumes that each
candidate pair (driver, device) matches, see driver_match_device()

Drop the bus's match function that always returned 1 and so
implements the same behaviour as when there is no match function.

Signed-off-by: Lizhe <sensor1010@163.com>
Link: https://lore.kernel.org/r/20230319044733.327091-1-sensor1010@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: portman2x4: remove unused portman_read_command,data functions

clang with W=1 reports
sound/drivers/portman2x4.c:185:18: error: unused function
  'portman_read_command' [-Werror,-Wunused-function]
static inline u8 portman_read_command(struct portman *pm)
                 ^
sound/drivers/portman2x4.c:195:18: error: unused function
  'portman_read_data' [-Werror,-Wunused-function]
static inline u8 portman_read_data(struct portman *pm)
                 ^
These static functions are not used, so remove them.

Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230318135229.1685266-1-trix@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: ymfpci: remove unused snd_ymfpci_readb function

clang with W=1 reports
sound/pci/ymfpci/ymfpci_main.c:34:18: error:
  unused function 'snd_ymfpci_readb' [-Werror,-Wunused-function]
static inline u8 snd_ymfpci_readb(struct snd_ymfpci *chip, u32 offset)
                 ^
This static function is not used, so remove it.

Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20230318132708.1684504-1-trix@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda/realtek: Add quirks for some Clevo laptops

Add the audio quirk for some of Clevo's latest RPL laptops:

- NP50RNJS (ALC256)
- NP70SNE (ALC256)
- PD50SNE (ALC1220)
- PE60RNE (ALC1220)

Co-authored-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230317141825.11807-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda/ca0132: fixup buffer overrun at tuning_ctl_set()

tuning_ctl_set() might have buffer overrun at (X) if it didn't break
from loop by matching (A).

static int tuning_ctl_set(...)
{
for (i = 0; i < TUNING_CTLS_COUNT; i++)
(A) if (nid == ca0132_tuning_ctls[i].nid)
break;

snd_hda_power_up(...);
(X) dspio_set_param(..., ca0132_tuning_ctls[i].mid, ...);
snd_hda_power_down(...);                ^

return 1;
}

We will get below error by cppcheck

sound/pci/hda/patch_ca0132.c:4229:2: note: After for loop, i has value 12
 for (i = 0; i < TUNING_CTLS_COUNT; i++)
 ^
sound/pci/hda/patch_ca0132.c:4234:43: note: Array index out of bounds
 dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20,
                                           ^
This patch cares non match case.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sfe9eap7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: asihpi: check pao in control_message()

control_message() might be called with pao = NULL.
Here indicates control_message() as sample.

(B) static void control_message(struct hpi_adapter_obj *pao, ...)
{                                                   ^^^
struct hpi_hw_obj *phw = pao->priv;
...                      ^^^
}

(A) void _HPI_6205(struct hpi_adapter_obj *pao, ...)
{                                      ^^^
...
case HPI_OBJ_CONTROL:
(B) control_message(pao, phm, phr);
break;          ^^^
...
}

void HPI_6205(...)
{
...
(A) _HPI_6205(NULL, phm, phr);
...       ^^^^
}

Therefore, We will get too many warning via cppcheck, like below

sound/pci/asihpi/hpi6205.c:238:27: warning: Possible null pointer dereference: pao [nullPointer]
 struct hpi_hw_obj *phw = pao->priv;
                          ^
sound/pci/asihpi/hpi6205.c:433:13: note: Calling function '_HPI_6205', 1st argument 'NULL' value is 0
  _HPI_6205(NULL, phm, phr);
            ^
sound/pci/asihpi/hpi6205.c:401:20: note: Calling function 'control_message', 1st argument 'pao' value is 0
   control_message(pao, phm, phr);
                   ^
Set phr->error like many functions doing, and don't call _HPI_6205()
with NULL.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ttypeaqz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: usb-audio: remove Wireless USB dead code

Wireless USB host controller support has been removed
from Linux Kernel more than 3 years ago in commit
caa6772db4c1 ("Staging: remove wusbcore and UWB from the
kernel tree."), and the associated code in the
snd-usb-audio driver became unused and untested.

If in the future somebody will return WUSB/UWB support
back to the kernel, the snd-usb-audio driver will reject
Wireless USB audio devices at probe stage, and this patch
should be reverted.

Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Link: https://lore.kernel.org/r/20230312222857.296623-1-ruslan.bilovol@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v6.3-rc1' of https://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.3

More fixes that came in since -rc1, a lot from Intel - looks like
they've been busy test.  Everything is driver specific.

ASoC: hdmi-codec: only startup/shutdown on supported streams

Currently only one stream is supported. This isn't usally a problem
until you have a multi codec audio card. Because the audio card will run
startup and shutdown on both capture and playback streams. So if your
hdmi-codec only support either playback or capture. Then ALSA can't open
for playback and capture.

This patch will ignore if startup and shutdown are called with a non
supported stream. Thus, allowing an audio card like this:

           +-+
 cpu1 <--@-| |-> codec1 (HDMI-CODEC)
           | |<- codec2 (NOT HDMI-CODEC)
           +-+

Signed-off-by: Emil Svendsen <emas@bang-olufsen.dk>
Link: https://lore.kernel.org/r/20230309065432.4150700-2-emas@bang-olufsen.dk
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: da7219: Initialize jack_det_mutex

The following traceback is reported if mutex debugging is enabled.

DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 0 PID: 17 at kernel/locking/mutex.c:950 __mutex_lock_common+0x31c/0x11d4
Modules linked in:
CPU: 0 PID: 17 Comm: kworker/0:1 Not tainted 5.10.172-lockdep-21846-g849884cfca5a #1 fd2de466502012eb58bc8beb467f07d0b925611f
Hardware name: MediaTek kakadu rev0/rev1 board (DT)
Workqueue: events da7219_aad_jack_det_work
pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
pc : __mutex_lock_common+0x31c/0x11d4
lr : __mutex_lock_common+0x31c/0x11d4
sp : ffffff80c0317ae0
x29: ffffff80c0317b50 x28: ffffff80c0317b20
x27: 0000000000000000 x26: 0000000000000000
x25: 0000000000000000 x24: 0000000100000000
x23: ffffffd0121d296c x22: dfffffd000000000
x21: 0000000000000000 x20: 0000000000000000
x19: ffffff80c73d7190 x18: 1ffffff018050f52
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000001 x12: 0000000000000001
x11: 0000000000000000 x10: 0000000000000000
x9 : 83f0d991da544b00 x8 : 83f0d991da544b00
x7 : 0000000000000000 x6 : 0000000000000001
x5 : ffffff80c03176a0 x4 : 0000000000000000
x3 : ffffffd01067fd78 x2 : 0000000100000000
x1 : ffffff80c030ba80 x0 : 0000000000000028
Call trace:
__mutex_lock_common+0x31c/0x11d4
mutex_lock_nested+0x98/0xac
da7219_aad_jack_det_work+0x54/0xf0
process_one_work+0x6cc/0x19dc
worker_thread+0x458/0xddc
kthread+0x2fc/0x370
ret_from_fork+0x10/0x30
irq event stamp: 579
hardirqs last enabled at (579): [<ffffffd012442b30>] exit_to_kernel_mode+0x108/0x138
hardirqs last disabled at (577): [<ffffffd010001144>] __do_softirq+0x53c/0x125c
softirqs last enabled at (578): [<ffffffd01009995c>] __irq_exit_rcu+0x264/0x4f4
softirqs last disabled at (573): [<ffffffd01009995c>] __irq_exit_rcu+0x264/0x4f4
---[ end trace 26da674636181c40 ]---

Initialize the mutex to fix the problem.

Cc: David Rau <David.Rau.opensource@dm.renesas.com>
Fixes: 7fde88eda855 ("ASoC: da7219: Improve the IRQ process to increase the stability")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230307155111.1985522-1-linux@roeck-us.net
Signed-off-by: Mark Brown <broonie@kernel.org>

ALSA: hda: Match only Intel devices with CONTROLLER_IN_GPU()

CONTROLLER_IN_GPU() is clearly intended to match only Intel devices, but
previously it checked only the PCI Device ID, not the Vendor ID, so it
could match devices from other vendors that happened to use the same Device
ID.

Update CONTROLLER_IN_GPU() so it matches only Intel devices.

Fixes: 535115b5ff51 ("ALSA: hda - Abort the probe without i915 binding for HSW/B")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230307214054.886721-1-helgaas@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book2 Pro

Samsung Galaxy Book2 Pro (13" 2022 NP930XED-KA1DE) with codec SSID
144d:c868 requires the same workaround for enabling the speaker amp
like other Samsung models with ALC298 code.

Signed-off-by: Hamidreza H. Fard <nitocris@posteo.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230307163741.3878-1-nitocris@posteo.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda/realtek: fix speaker, mute/micmute LEDs not work on a HP platform

There is a HP platform needs ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED quirk to
make mic-mute/audio-mute/speaker working.

Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230307135317.37621-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: hda: intel-dsp-config: add MTL PCI id

Use SOF as default audio driver.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Gongjun Song <gongjun.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230306074101.3906707-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

kselftest/alsa: Log card names during startup

It can be helpful to know which card numbers apply to which cards in a
multi-card system so log the card names when we start the test programs.
People looking at the logs may not have direct access to the systems being
tested.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230223-alsa-log-ctl-name-v1-2-ac0f10cc4db2@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

kselftest/alsa - mixer: Always log control names

Currently we only log the names of controls on error but it can be useful
to know what control we're testing (for example, when looking at why the
tests are taking a while to run). People looking at test logs may not have
direct access to the target system. This will increase the amount we write
to the console, hopefully that's buffered.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230223-alsa-log-ctl-name-v1-1-ac0f10cc4db2@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

kselftest/alsa - mixer-test: Don't fail tests if we can't restore default

If a control has an invalid default value then we might fail to set it
when restoring the default value after our write tests, for example due to
correctly implemented range checks in put() operations. Currently this
causes us to report the tests we were running as failed even when the
operation we were trying to test is successful, making it look like there
are problems where none really exist. Stop doing this, only reporting any
issues during the actual test.

We already have validation for the initial readback being in spec and for
writing the default value back so failed tests will be reported for these
controls, and we log an error on the operation that failed when we write so
there will be a diagnostic warning the user that there is a problem.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230224-alsa-mixer-test-restore-invalid-v1-1-454f0f1f2c4b@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

SoC: SOF: Intel: FIx device descriptions (missing

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

We have recently noticed that the ops_free callback was missed for the device
descriptions on Intel platforms.

ASoC: SOF: IPC4: update gain ipc msg definition to align with fw

Recent firmware changes modified the curve duration from 32 to 64 bits,
which breaks volume ramps. A simple solution would be to change the
definition, but unfortunately the ASoC topology framework only supports
up to 32 bit tokens.

This patch suggests breaking the 64 bit value in low and high parts, with
only the low-part extracted from topology and high-part only zeroes. Since
the curve duration is represented in hundred of nanoseconds, we can still
represent a 400s ramp, which is just fine. The defacto ABI change has no
effect on existing users since the IPC4 firmware has not been released just
yet.

Link: https://github.com/thesofproject/linux/issues/4026
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307110656.1816-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: sof-audio: don't squelch errors in WIDGET_SETUP phase

When an IPC error happens while setting-up a widget during the FE
hw_params phase, the existing logic will unwind all previous
configurations but will overwrite the return status. The ALSA/ASoC
logic will then proceed with the prepare and trigger phases, even
though the firmware resources are not available.

Fix by returning the initial error code and ignoring the code returned
in the UNPREPARE phase.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307114659.4614-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda-ctrl: re-add sleep after entering and exiting reset

This reverts commit a09d82ce0a867 ("ASoC: SOF: Intel: hda-ctrl: remove
useless sleep")

It was a mistake to remove those delays, in light of comments in the
HDaudio spec captured in snd_hdac_bus_reset_link() that the codec
needs time for its initialization and PLL lock.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307095412.3416-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: hda-dsp: harden D0i3 programming sequence

Add delay between set and wait command according to hardware programming
sequence. Also add debug log to detect error.

Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307095453.3719-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: set dmic dai index from copier

Dmic dai index was set incorrectly to bits 5-7, when it is actually using
just the lowest 3. Fix the macro for setting the bits.

Fixes: aa84ffb72158 ("ASoC: SOF: ipc4-topology: Add support for SSP/DMIC DAI's")
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307110730.1995-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: sof-audio: Fix broken early bclk feature for SSP

With the removal of widget setup during BE hw_params, the DAI config IPC
is never sent with the SOF_DAI_CONFIG_FLAGS_HW_PARAMS. This means that
the early bit clock feature required for certain codecs will be broken.

Fix this by saving the config flags sent during BE DAI hw_params and
reusing it when the DAI_CONFIG IPC is sent after the DAI widget is set
up. Also, free the DAI config before the widget is freed.

The DAI_CONFIG IPC sent during the sof_widget_free() does not have the
DAI index information. So, save the dai_index in the config during
hw_params and reuse it during hw_free.

For IPC4, do not clear the node ID during hw_free. It will be needed for
freeing the group_ida during unprepare.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307114639.4553-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: pci-tng: revert invalid bar size setting

The logic for the ioremap is to find the resource index 3 (IRAM) and
infer the BAR address by subtracting the IRAM offset. The BAR size
defined in hardware specifications is 2MB.

The commit 5947b2726beb6 ("ASoC: SOF: Intel: Check the bar size before
remapping") tried to find the BAR size by querying the resource length
instead of a pre-canned value, but by requesting the size for index 3
it only gets the size of the IRAM. That's obviously wrong and prevents
the probe from proceeding.

This commit attempted to fix an issue in a fuzzing/simulated
environment but created another on actual devices, so the best course
of action is to revert that change.

Reported-by: Ferry Toth <fntoth@gmail.com>
Tested-by: Ferry Toth <fntoth@gmail.com> (Intel Edison-Arduino)
Link: https://github.com/thesofproject/linux/issues/3901
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307095341.3222-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: topology: Fix error handling in sof_widget_ready()

Fix the error paths in sof_widget_ready() to free all allocated memory
and prevent memory leaks.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307114815.4909-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: soc-acpi: fix copy-paste issue in topology names

For some reason the convention for topology names was not followed and
the name inspired by another unrelated hardware configuration. As a
result, the kernel will request a non-existent topology file.

Link: https://github.com/thesofproject/sof/pull/6878
Fixes: 2ec8b081d59f ("ASoC: Intel: soc-acpi: Add entry for sof_es8336 in ADL match table")
Cc: stable@vger.kernel.org
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307100733.15025-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc4-topology: Fix incorrect sample rate print unit

This patch fixes the sample rate print unit from KHz to Hz.
E.g. 48000KHz becomes 48000Hz.

Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307110751.2053-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: ipc3: Check for upper size limit for the received message

The sof_ipc3_rx_msg() checks for minimum size of a new rx message but it is
missing the check for upper limit.
Corrupted or compromised firmware might be able to take advantage of this
to cause out of bounds reads outside of the message area.

Reported-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307114917.5124-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASOC: SOF: Intel: pci-tgl: Fix device description

Add the missing ops_free callback.

Fixes: 63d375b9f2a9 ("ASoC: SOF: Intel: pci-tgl: use RPL specific firmware definitions")

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307093914.25409-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: SKL: Fix device description

Add missing ops_free callback for SKL/KBL platforms.

Fixes: 52d7939d10f2 ("ASoC: SOF: Intel: add ops for SKL/KBL")

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307093914.25409-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: HDA: Fix device description

Add the missing ops_free callback for APL/CNL/CML/JSL/TGL/EHL platforms.

Fixes: 1da51943725f ("ASoC: SOF: Intel: hda: init NHLT for IPC4")

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307093914.25409-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: SOF: Intel: MTL: Fix the device description

Add the missing ops_free callback.

Fixes: 064520e8aeaa ("ASoC: SOF: Intel: Add support for MeteorLake (MTL)")

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307093914.25409-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: avs: Machine board fixes

Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:

Series of adjustments to machine board files. Use fixed format in boards
that were not using one. Fix clock handling.

ASoC: Intel: avs: nau8825: Adjust clock control

Internal clock shall be adjusted also in cases when DAPM event other
than 'ON' is triggered.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230303134854.2277146-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: avs: ssm4567: Remove nau8825 bits

Some of the nau8825 clock control got into the ssm4567, remove it.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230303134854.2277146-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: avs: rt5682: Explicitly define codec format

rt5682 is headset codec configured in 48000/2/S24_LE format regardless
of front end format, so force it to be so.

Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230303134854.2277146-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: avs: da7219: Explicitly define codec format

da7219 is headset codec configured in 48000/2/S24_LE format regardless
of front end format, so force it to be so.

Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230303134854.2277146-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: Intel: avs: max98357a: Explicitly define codec format

max98357a is speaker codec configured in 48000/2/S16_LE format
regardless of front end format, so force it to be so.

Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230303134854.2277146-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: codecs: tx-macro: Fix for KASAN: slab-out-of-bounds

When we run syzkaller we get below Out of Bound.
    "KASAN: slab-out-of-bounds Read in regcache_flat_read"

    Below is the backtrace of the issue:

    dump_backtrace+0x0/0x4c8
    show_stack+0x34/0x44
    dump_stack_lvl+0xd8/0x118
    print_address_description+0x30/0x2d8
    kasan_report+0x158/0x198
    __asan_report_load4_noabort+0x44/0x50
    regcache_flat_read+0x10c/0x110
    regcache_read+0xf4/0x180
    _regmap_read+0xc4/0x278
    _regmap_update_bits+0x130/0x290
    regmap_update_bits_base+0xc0/0x15c
    snd_soc_component_update_bits+0xa8/0x22c
    snd_soc_component_write_field+0x68/0xd4
    tx_macro_digital_mute+0xec/0x140

    Actually There is no need to have decimator with 32 bits.
    By limiting the variable with short type u8 issue is resolved.

Signed-off-by: Ravulapati Vishnu Vardhan Rao <quic_visr@quicinc.com>
Link: https://lore.kernel.org/r/20230304080702.609-1-quic_visr@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: qcom: q6prm: fix incorrect clk_root passed to ADSP

The second to last argument is clk_root (root of the clock), however the
code called q6prm_request_lpass_clock() with clk_attr instead
(copy-paste error).  This effectively was passing value of 1 as root
clock which worked on some of the SoCs (e.g. SM8450) but fails on
others, depending on the ADSP.  For example on SM8550 this "1" as root
clock is not accepted and results in errors coming from ADSP.

Fixes: 2f20640491ed ("ASoC: qdsp6: qdsp6: q6prm: handle clk disable correctly")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230302122908.221398-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: clarify that SND_SOC_IMX_SGTL5000 is the old driver

Both SND_SOC_IMX_SGTL5000 and SND_SOC_FSL_ASOC_CARD implement the
fsl,imx-audio-sgtl5000 compatible string, which is confusing. It took a
little research to find out that the latter is much newer and it is
supposed to be the preferred choice since several years.

Add a clarification note to avoid wasting time for future readers.

Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20230303093410.357621-1-luca.ceresoli@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>

Linux 6.3-rc1

cpumask: re-introduce constant-sized cpumask optimizations

Commit aa47a7c215e7 ("lib/cpumask: deprecate nr_cpumask_bits") resulted
in the cpumask operations potentially becoming hugely less efficient,
because suddenly the cpumask was always considered to be variable-sized.

The optimization was then later added back in a limited form by commit
6f9c07be9d02 ("lib/cpumask: add FORCE_NR_CPUS config option"), but that
FORCE_NR_CPUS option is not useful in a generic kernel and more of a
special case for embedded situations with fixed hardware.

Instead, just re-introduce the optimization, with some changes.

Instead of depending on CPUMASK_OFFSTACK being false, and then always
using the full constant cpumask width, this introduces three different
cpumask "sizes":

 - the exact size (nr_cpumask_bits) remains identical to nr_cpu_ids.

   This is used for situations where we should use the exact size.

 - the "small" size (small_cpumask_bits) is the NR_CPUS constant if it
   fits in a single word and the bitmap operations thus end up able
   to trigger the "small_const_nbits()" optimizations.

   This is used for the operations that have optimized single-word
   cases that get inlined, notably the bit find and scanning functions.

 - the "large" size (large_cpumask_bits) is the NR_CPUS constant if it
   is an sufficiently small constant that makes simple "copy" and
   "clear" operations more efficient.

   This is arbitrarily set at four words or less.

As a an example of this situation, without this fixed size optimization,
cpumask_clear() will generate code like

        movl    nr_cpu_ids(%rip), %edx
        addq    $63, %rdx
        shrq    $3, %rdx
        andl    $-8, %edx
        callq   memset@PLT

on x86-64, because it would calculate the "exact" number of longwords
that need to be cleared.

In contrast, with this patch, using a MAX_CPU of 64 (which is quite a
reasonable value to use), the above becomes a single

movq $0,cpumask

instruction instead, because instead of caring to figure out exactly how
many CPU's the system has, it just knows that the cpumask will be a
single word and can just clear it all.

Note that this does end up tightening the rules a bit from the original
version in another way: operations that set bits in the cpumask are now
limited to the actual nr_cpu_ids limit, whereas we used to do the
nr_cpumask_bits thing almost everywhere in the cpumask code.

But if you just clear bits, or scan for bits, we can use the simpler
compile-time constants.

In the process, remove 'cpumask_complement()' and 'for_each_cpu_not()'
which were not useful, and which fundamentally have to be limited to
'nr_cpu_ids'.  Better remove them now than have somebody introduce use
of them later.

Of course, on x86-64 with MAXSMP there is no sane small compile-time
constant for the cpumask sizes, and we end up using the actual CPU bits,
and will generate the above kind of horrors regardless.  Please don't
use MAXSMP unless you really expect to have machines with thousands of
cores.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'v6.3-p2' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fix from Herbert Xu:
 "Fix a regression in the caam driver"

* tag 'v6.3-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: caam - Fix edesc/iv ordering mixup

Merge tag 'x86-urgent-2023-03-05' of git://git./linux/kernel/git/tip/tip

Pull x86 updates from Thomas Gleixner:
 "A small set of updates for x86:

   - Return -EIO instead of success when the certificate buffer for SEV
     guests is not large enough

   - Allow STIPB to be enabled with legacy IBSR. Legacy IBRS is cleared
     on return to userspace for performance reasons, but the leaves user
     space vulnerable to cross-thread attacks which STIBP prevents.
     Update the documentation accordingly"

* tag 'x86-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  virt/sev-guest: Return -EIO if certificate buffer is not large enough
  Documentation/hw-vuln: Document the interaction between IBRS and STIBP
  x86/speculation: Allow enabling STIBP with legacy IBRS

Merge tag 'irq-urgent-2023-03-05' of git://git./linux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "A set of updates for the interrupt susbsystem:

   - Prevent possible NULL pointer derefences in
     irq_data_get_affinity_mask() and irq_domain_create_hierarchy()

   - Take the per device MSI lock before invoking code which relies on
     it being hold

   - Make sure that MSI descriptors are unreferenced before freeing
     them. This was overlooked when the platform MSI code was converted
     to use core infrastructure and results in a fals positive warning

   - Remove dead code in the MSI subsystem

   - Clarify the documentation for pci_msix_free_irq()

   - More kobj_type constification"

* tag 'irq-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/msi, platform-msi: Ensure that MSI descriptors are unreferenced
  genirq/msi: Drop dead domain name assignment
  irqdomain: Add missing NULL pointer check in irq_domain_create_hierarchy()
  genirq/irqdesc: Make kobj_type structures constant
  PCI/MSI: Clarify usage of pci_msix_free_irq()
  genirq/msi: Take the per-device MSI lock before validating the control structure
  genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask()

Merge tag 'pull-misc' of git://git./linux/kernel/git/viro/vfs

Pull vfs update from Al Viro:
 "Adding Christian Brauner as VFS co-maintainer"

* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Adding VFS co-maintainer