Arnd Bergmann [Fri, 23 Sep 2022 15:47:08 +0000 (17:47 +0200)]
Merge tag 'mvebu-dt64-6.1-1' of git://git./linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt64 for 6.1 (part 1)
- Add UART1-3 for AC5/AC5X SoC
- Improve uDPU support (Aramda 3720 based board)
- Add new eDPU based on uDPU
* tag 'mvebu-dt64-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: 98dx25xx: use correct property for i2c gpios
arm64: dts: marvell: add support for Methode eDPU
dt-bindings: marvell: armada-37xx: add Methode eDPU compatible
arm64: dts: marvell: split Methode uDPU DTS
arm64: dts: marvell: rename temp sensor nodes
arm64: dts: marvell: uDPU: remove LED node pinctrl-names
arm64: dts: marvell: uDPU: align LED-s with bindings
arm64: dts: marvell: uDPU: add missing SoC compatible
arm64: dts: marvell: espressobin-ultra: add generic Espressobin compatible
dt-bindings: marvell: convert Armada 37xx compatibles to YAML
dt-bindings: vendor-prefixes: add Methode Electronics
arm64: dts: marvell: Add UART1-3 for AC5/AC5X
Link: https://lore.kernel.org/r/87h70yxfmy.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 23 Sep 2022 14:36:42 +0000 (16:36 +0200)]
Merge tag 'qcom-arm64-for-6.1' of https://git./linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DTS updates for 6.1
Support for Samsung Galaxy E5, E7 and Grand Max is added, with support
for both 32-bit and 64-bit variants. The Samsung Galaxy S4 Mini Value
Edition gains magnetometer support.
MSM8996-based Xiaomi devices gains descriptions of the LPG-based LEDs.
On SA8295P ADP problems arising from regulators being switched into
low-power mode is worked around by removing this ability, for now.
The onboard USB Hub on SC7180 Trogdor is finally described and a few ADC
related updates are introduced.
On SC7280 support for the CPU and LLC bwmon instances are introduced.
Soundwire, audio codecs and sound introduced for a variety of boards.
Using required-opps the USB controllers votes for a minimum corner on
VDD_CX.
The onboard USB Hub Herobrine is described. A new board, the Google
Evoker is added, as is another revision of Herobrine Villager.
On SC8280XP the USB controllers are marked as wakeup-sources, to keep
them powered during suspend. The CRD has HID devices marked as
wakeup-sources to enable resuming the system. In addition to these
changes the alternative touchpad is introduced on the Lenovo ThinkPad
X13s.
SDM845 gains RPMh stats support and the LLCC BWMON is added. For SM6350
interconnect providers and GPI DMA is introduced. A description of the
PM7280b PMIC is added to Fairphone FP4 on SM7225.
With the multi-MSI support added in the PCIe controller, SM8250 gets all
its MSI interrupts added.
UFS ICE and the second SDHCI controller is introduced on SM8450. Support
for the Sony Xperia 1 IV is introduced.
Throughout a variety of platforms the TCSR mutex syscon is replaced with
the MMIO-based binding. TCSR nodes gained proper compatibles and halt
syscon nodes are split out from the mutex ranges.
A range of fixes to align with DT bindings are introduced. Among these
are the changes to the follow the TLMM binding and suffix pinctrl states
with -state and subnodes thereof with -pins, another is a number of
changes transitioning to use -gpios and introduction of proper parent
clock references in various clock providers.
* tag 'qcom-arm64-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (136 commits)
arm64: dts: qcom: sc7280: Add required-opps for USB
arm64: dts: qcom: sm8450: fix UFS PHY serdes size
arm64: dts: qcom: ipq8074: fix PCIe PHY serdes size
arm64: dts: qcom: sa8295p-adp: add missing gpio-ranges in PMIC GPIOs
arm64: dts: qcom: sa8295p-adp: add fallback compatible to PMIC GPIOs
arm64: dts: qcom: msm8996-xiaomi: align PMIC GPIO pin configuration with DT schema
arm64: dts: qcom: msm8994-msft-lumia-octagon: align resin node name with bindings
arm64: dts: qcom: pmi8994: add missing MPP compatible fallback
dt-bindings: pci: QCOM Add missing sc7280 aggre0, aggre1 clocks
arm64: dts: qcom: sc7280: Add missing aggre0, aggre1 clocks
arm64: dts: qcom: sc7280-villager: Adjust LTE SKUs
dt-bindings: arm: qcom: Adjust LTE SKUs for sc7280-villager
arm64: dts: qcom: sc7280-herobrine: Add nodes for onboard USB hub
arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
arm64: dts: qcom: align SDHCI reg-names with DT schema
arm64: dts: qcom: sm8250: provide additional MSI interrupts
arm64: dts: qcom: msm8996: add #clock-cells and XO clock to the HDMI PHY node
arm64: dts: qcom: Use WCD9335 DT bindings
arm64: dts: qcom: msm8994: switch TCSR mutex to MMIO
arm64: dts: qcom: ipq6018: switch TCSR mutex to MMIO
...
Link: https://lore.kernel.org/r/20220921234854.1343238-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 23 Sep 2022 14:35:16 +0000 (16:35 +0200)]
Merge tag 'qcom-dts-for-6.1' of https://git./linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM DTS updates for 6.1
This adds extends the IPQ8064 support with the two variants IPQ8062 and
IPQ8065. MSM8974 and APQ8084 gained RPM stats support.
The Audio DSP remoteproc was added to MSM8226 and enabled for ASUS
ZenWatch 2 and LG G Watch R.
MSM8660 gained one I2C and one SPI bus and the APQ8060 Dragonboard got
the TMA340 Touchscreen described.
A wide range of improvements are done throughout the DTS files to align
with bindings, fix issues and improve structure on things.
* tag 'qcom-dts-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (35 commits)
ARM: dts: qcom: apq8026-lg-lenok: Enable ADSP
ARM: dts: qcom: apq8026-asus-sparrow: Enable ADSP
ARM: dts: qcom: msm8226: Add ADSP node
ARM: dts: qcom: ipq8064: pad addresses to 8 digit
ARM: dts: qcom: ipq8064: reorganize node order and sort them
ARM: dts: qcom: align SDHCI clocks with DT schema
ARM: dts: qcom: align SDHCI reg-names with DT schema
ARM: dts: qcom: msm8960: add clocks to the MMCC device node
ARM: dts: qcom: apq8064: add clocks to the MMCC device node
ARM: dts: qcom: msm8960: add clocks to the GCC device node
ARM: dts: qcom: apq8064: add clocks to the GCC device node
ARM: dts: qcom: msm8960: add clocks to the LCC device node
ARM: dts: qcom: apq8064: add clocks to the LCC device node
ARM: dts: qcom: msm8226: switch TCSR mutex to MMIO
ARM: dts: qcom: apq8084: switch TCSR mutex to MMIO
ARM: dts: qcom: msm8660: fix node names for fixed clocks
ARM: dts: qcom: msm8660: add pxo/cxo clocks to the GCC node
ARM: dts: qcom: apq8060-dragonboard: Add TMA340 to APQ8060 DragonBoard
ARM: dts: qcom: msm8660: Add GSBI3 I2C bus
ARM: dts: qcom: msm8660: Add GSBI1 SPI bus
...
Link: https://lore.kernel.org/r/20220921222619.1338380-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 23 Sep 2022 14:31:28 +0000 (16:31 +0200)]
Merge tag 'ti-k3-dt-for-v6.1' of https://git./linux/kernel/git/ti/linux into arm/dt
TI K3 device tree updates for v6.1
New Features:
AM62A:
* Basic support for AM62A SoC and SK Board
AM62:
* EPWM support
AM64:
* GPMC, LED, Crypto accelerator support
Fixes:
J7200 pinmux node update
Fixes for Crypto and RNG accelerators on AM65, J721e, J7200
Cleanups:
Reorder SoC compatible and pinmux macros alphabetically
* tag 'ti-k3-dt-for-v6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (22 commits)
arm64: dts: ti: k3-j7200: fix main pinmux range
arm64: dts: ti: Add support for AM62A7-SK
arm64: dts: ti: Introduce AM62A7 family of SoCs
dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM62A
dt-bindings: arm: ti: Add bindings for AM62A7 SoC
dt-bindings: arm: ti: Rearrange IOPAD macros alphabetically
arm64: dts: ti: k3-am625-sk: Add epwm nodes
arm64: dts: ti: k3-am62-main: Add epwm nodes
arm64: dts: ti: k3-am642-sk: Add DT entry for onboard LEDs
arm64: dts: ti: k3-j7200-mcu-wakeup: Add SA2UL node
arm64: dts: ti: k3-am65-main: Do not exclusively claim SA2UL
arm64: dts: ti: k3-am65-main: Move SA2UL to unused PSI-L thread ID
arm64: dts: ti: k3-am65-main: Disable RNG node
arm64: dts: ti: k3-j7200-main: Add main domain watchdog entries
arm64: dts: ti: k3-am64-main: Add ELM (Error Location Module) node
arm64: dts: ti: k3-am64-main: Add GPMC memory controller node
arm64: dts: ti: k3-j721e-main: fix RNG node clock id
arm64: dts: ti: k3-am64-main: Enable crypto accelerator
arm64: dts: ti: k3-am64: Add SA2UL address space to Main CBASS ranges
arm64: dts: ti: k3-am64-main: Add main_cpts label
...
Link: https://lore.kernel.org/r/44729b46-27f9-94a0-17ed-8868649a4a0a@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 23 Sep 2022 14:26:47 +0000 (16:26 +0200)]
Merge tag 'renesas-arm-dt-for-v6.1-tag2' of git://git./linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v6.1 (take two)
- Merge Renesas ARM/ARM64 maintainers entries,
- CAN support for the RZ/N1 SoC and the RZN1D-DB development board,
- Watchdog, pin control, I2C (EEPROM), GPIO (LEDS/switches), and
Ethernet support for the R-Car V4H SoC and the White Hawk
development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v6.1-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (26 commits)
arm64: dts: renesas: Adjust whitespace around '{'
arm64: dts: renesas: rzg2ul-smarc: Include SoM DTSI into board DTS
arm64: dts: renesas: rzg2ul-smarc-som: Drop enabling wdt2
ARM: dts: renesas: Fix USB PHY device and child node names
arm64: dts: renesas: r8a779a0: Update to R-Car Gen4 compatible values
arm64: dts: renesas: white-hawk-cpu: Add missing bootargs
arm64: dts: renesas: spider-cpu: Add missing bootargs
arm64: dts: renesas: spider: Move aliases and chosen
arm64: dts: renesas: white-hawk-cpu: Add Ethernet support
arm64: dts: renesas: white-hawk: Move aliases and chosen
arm64: dts: renesas: r8a779g0: Add RAVB nodes
arm64: dts: renesas: white-hawk-cpu: Add push switches
arm64: dts: renesas: white-hawk-cpu: Add GP LEDs
arm64: dts: renesas: r8a779g0: Add GPIO nodes
arm64: dts: renesas: white-hawk: Add Ethernet sub-board
arm64: dts: renesas: white-hawk: Add CSI/DSI sub-board
arm64: dts: renesas: white-hawk: Add I2C0 and EEPROMs
arm64: dts: renesas: r8a779g0: Add I2C nodes
arm64: dts: renesas: white-hawk-cpu: Add serial port pin control
arm64: dts: renesas: r8a779g0: Add pinctrl device node
...
Link: https://lore.kernel.org/r/cover.1663588776.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 23 Sep 2022 14:19:55 +0000 (16:19 +0200)]
Merge tag 'v6.0-next-dts64' of https://git./linux/kernel/git/matthias.bgg/linux into arm/dt
mt6795:
- add add system timer node
mt7986a:
- add wifi support
mt8183:
- add MDP3 and keypad
mt8186:
- basic support for the Evaluation Board including, i2c, usb and uart.
mt8192:
- add nodes to support PWM, MIPI transciever, display with GCE and DSI.
mt8195:
- disable nodes not used on all boards
- Add support for CPU freq, clocks, power domain controller, spmi, scp.
- Enable audio decoder, DSP, IOMMU, mailbox.
- Add display nodes for vdosys0.
- On Cherry based chromebooks, enable the system companion processor,
Cross EC, Google Security Chip, secondary MMC controller, trackpad and
a few regulators.
* tag 'v6.0-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (34 commits)
arm64: dts: mediatek: mt6795: Add CPUX system timer node
arm64: dts: mt7986: add built-in Wi-Fi device nodes
arm64: dts: mediatek: cherry: Enable MT6315 regulators on SPMI bus
arm64: dts: mediatek: cherry: Enable Elantech eKTH3000 i2c trackpad
arm64: dts: mediatek: cherry: Enable secondary SD/MMC controller
arm64: dts: mediatek: cherry: Add keyboard mapping for the top row
arm64: dts: mediatek: cherry: Add Google Security Chip (GSC) TPM
arm64: dts: mediatek: cherry: Wire up the ChromeOS Embedded Controller
arm64: dts: mediatek: cherry: Enable the System Companion Processor
arm64: dts: mediatek: Fix build warnings of mt8173 vcodec nodes
arm64: dts: mediatek: Add missing xHCI clocks for mt8192 and mt8195
arm64: dts: mt8192: Add dsi node
arm64: dts: mt8192: Add display nodes
arm64: dts: mediatek: Add mmsys #reset-cells property for mt8192
arm64: dts: mt8192: Add mipi_tx node
arm64: dts: mt8192: Add pwm node
arm64: dts: Add MediaTek MT8186 dts and evaluation board and Makefile
arm64: dts: mt8195: Add display node for vdosys0
arm64: dts: mt8195: Add gce node
arm64: dts: mt8195: Add iommu and smi nodes
...
Link: https://lore.kernel.org/r/3b915692-c8a9-c508-5a4a-0fdb49355e99@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Linus Walleij [Mon, 19 Sep 2022 09:26:08 +0000 (11:26 +0200)]
ARM: dts: integrator: Tag PCI host with device_type
The DT parser is dependent on the PCI device being tagged as
device_type = "pci" in order to parse memory ranges properly.
Fix this up.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220919092608.813511-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 23 Sep 2022 14:18:07 +0000 (16:18 +0200)]
Merge tag 'sunxi-dt-for-6.1-1' of https://git./linux/kernel/git/sunxi/linux into arm/dt
- Allwinner A100 DMA node
- Allwinner H6 GPU devfreq scaling
- sunxi sram bindings cleanup and D1 addition
* tag 'sunxi-dt-for-6.1-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
dt-bindings: sram: sunxi-sram: Add D1 compatible string
dt-bindings: sram: sunxi-sram: Clean up the compatible lists
arm64: dts: allwinner: beelink-gs1: Enable GPU OPP
arm64: dts: allwinner: h6: Add GPU OPP table
arm64: dts: allwinner: h6: Add cooling map for GPU
arm64: dts: allwinner: a100: Add I2C DMA requests
arm64: dts: allwinner: a100: Add device node for DMA controller
Link: https://lore.kernel.org/r/YyePKDnOeP8Tdt5n@kista.localdomain
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 23 Sep 2022 14:10:56 +0000 (16:10 +0200)]
Merge tag 'imx-dt64-6.1' of git://git./linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree change for 6.1:
- New board support: i.MX8DXL EVK, Kontron SL/BL i.MX8MM OSM-S, i.MX8MM
Gateworks GW7904, MSC SM2S-IMX8PLUS SoM and carrier board, NXP
LS2081ARDB.
- Update i.MX8MQ device tree to use generic name 'dma-controller' for
SDMA.
- A number of i.MX8ULP device tree improvements and updates: correct
parent clock of LPI2C & LPSPI, increase the clock speed of LPSPI, add
PMU and mailbox device, drop undocumented CGC property, enable FEC, etc.
- Add interconnect property for various i.MX8MP blk-ctrl devices.
- Enable VPU PGC, blk-ctrl and PCIe support for i.MX8MP SoC.
- A set of changes from Peng Fan to add various devices for i.MX93 SoC,
including MU, blk-ctrl, PMU, LPI2C, LPSPI, SRC, etc.
- Two set of changes to update LS1043A and LS1046A device trees on
various aspects, including USB3, PCIe, DMA, mdio-mux, QSPI Flash, etc.
- Board imx8mq-librem5 update: add USB role switching, add RGB PWM
notification LEDs, add voice coil motor for focus control, fix MIPI_CSI
description.
- A series from Frieder Schrempf to improve imx8mm-kontron device trees
for VSELECT switch, DDRC operating point, SPI NOR partition layout etc.
- A set of display and PMIC related additions and improvements on
imx8mm-verdin board.
- A number of i.MX8M Plus DHCOM PDK2 device tree improvments from Marek
Vasut.
- A few imx8mp-venice device tree updates on USB, cpufreq and WiFi/BT.
- A series from Vladimir Oltean to enable multiple switch CPU ports
support.
- Other small and random board specific updates.
* tag 'imx-dt64-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (90 commits)
arm64: dts: ls1046a-qds: Modify the qspi flash frequency
arm64: dts: ls1046a-qds: add mmio based mdio-mux nodes for FPGA
arm64: dts: ls1046a: add gpios based i2c recovery information
arm64: dts: ls1046a: use a pseudo-bus to constrain usb and sata dma size
arm64: dts: ls1046a: make dma-coherent global to the SoC
arm64: dts: ls1046a: add missing dma ranges property
arm64: dts: ls1046a: Add big-endian property for PCIe nodes
arm64: dts: ls1046a: Add the PME interrupt and big-endian to PCIe EP nodes
arm64: dts: ls1046a: Enable usb3-lpm-capable for usb3 node
arm64: dts: ls1043a-rdb: add pcf85263 rtc node
arm64: dts: ls1043a-qds: add mmio based mdio-mux support
arm64: dts: ls1043a: use a pseudo-bus to constrain usb and sata dma size
arm64: dts: ls1043a: add gpio based i2c recovery information
arm64: dts: ls1043a: make dma-coherent global to the SoC
arm64: dts: ls1043a: add missing dma ranges property
arm64: dts: ls1043a: Add big-endian property for PCIe nodes
arm64: dts: ls1043a: Add SCFG phandle for PCIe nodes
arm64: dts: ls1043a: use pcie aer/pme interrupts
arm64: dts: ls1043a: Enable usb3-lpm-capable for usb3 node
arm64: dts: ls1043a: fix the wrong size of dcfg space
...
Link: https://lore.kernel.org/r/20220918092806.2152700-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 23 Sep 2022 13:53:49 +0000 (15:53 +0200)]
Merge tag 'imx-dt-6.1' of git://git./linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree change for 6.1
- A series from Alexander Stein to add missing properties for i.MX6 SRAM.
- Drop 'interrupts' property when 'interrupts-extended' is present. This
fixes a dtbs_check warning with i.MX6 DT.
- Update device trees to use generic name 'dma-controller' for SDMA.
- A set of changes from Krzysztof Kozlowski to align SPI, LED and
gpio-keys node name with dtschema.
- A series of indentation and white-space cleanups from Marcel Ziswiler
to address various checkpatch warnings.
- Add DDR pinmux defines to VF610 DT header.
- A couple of changes from Peng Fan to update clock-names and add IPG
clock for i.MX7ULP LPI2C devices.
- Improve device tree structure for Kontron i.MX6UL/ULL based boards.
- A series of changes from Tim Harvey to add CAN regulator for Gateworks
i.MX6QDL boards.
- Various small and random board specific updates.
* tag 'imx-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (40 commits)
ARM: dts: imx6qdl-gw54xx: add CAN regulator
ARM: dts: imx6qdl-gw53xx: add CAN regulator
ARM: dts: imx6qdl-gw52xx: add CAN regulator
ARM: dts: imx: update sdma node name format
ARM: dts: imx6: skov: migrate to resistive-adc-touch
ARM: dts: imx6sx-udoo-neo: don't use multiple blank lines
ARM: dts: imx6sl: use tabs for code indent
ARM: dts: imx6sx: add missing properties for sram
ARM: dts: imx6sll: add missing properties for sram
ARM: dts: imx6sl: add missing properties for sram
ARM: dts: imx6qp: add missing properties for sram
ARM: dts: imx6dl: add missing properties for sram
ARM: dts: imx6q: add missing properties for sram
ARM: dts: imx7ulp: Add IPG clock for lpi2c
ARM: dts: imx7ulp: update the LPI2C clock-names
ARM: dts: vf610: ddr pinmux
ARM: dts: imx6qdl-dhcom: Move IPU iomux node from PDK2 to SoM file
ARM: dts: imx6ul-kontron: Add imx6ull-kontron-bl to Makefile
ARM: dts: imx6ul-kontron: Simplify devicetree structure
ARM: dts: vf610: align SPI node name with dtschema
...
Link: https://lore.kernel.org/r/20220918092806.2152700-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 23 Sep 2022 13:50:39 +0000 (15:50 +0200)]
Merge tag 'imx-bindings-6.1' of git://git./linux/kernel/git/shawnguo/linux into arm/dt
i.MX DT bindings for 6.1:
- Add compatible for new boards: Kontron BL i.MX8MM OSM-S, MSC
SM2S-IMX8PLUS SoM and SM2-MB-EP1 Carrier, i.MX8M Mini Gateworks
GW7904 board, i.MX8DXL EVK Board.
- Add add interconnect property for i.MX8MP various blk-ctrl devices.
- Add i.MX8MP HDMI HDCP and HRV power domain DT IDs.
- Add bindings for i.MX93 SRC and MEDIAMIX blk-ctrl.
- A minor style fix on i.MX8MM clock binding header.
* tag 'imx-bindings-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: imx: update fsl.yaml for imx8dxl
dt-bindings: firmware: add missing resource IDs for imx8dxl
dt-bindings: arm: Add i.MX8M Mini Gateworks GW7904 board
dt-bindings: soc: add i.MX93 mediamix blk ctrl
dt-bindings: soc: add i.MX93 SRC
dt-bindings: mfd: syscon: Add i.MX93 blk ctrl system registers
dt-bindings: arm: fsl: Add MSC SM2S-IMX8PLUS SoM and SM2-MB-EP1 Carrier
dt-bindings: arm: fsl: Add Kontron BL i.MX8MM OSM-S board
dt-bindings: arm: fsl: Rename compatibles for Kontron i.MX8MM SoM/board
dt-bindings: soc: imx: add i.MX8MP vpu blk ctrl
dt-bindings: soc: imx: add interconnect property for i.MX8MM vpu blk ctrl
dt-bindings: soc: imx: drop minItems for i.MX8MM vpu blk ctrl
dt-bindings: power: imx8mp-power: add HDMI HDCP/HRV
dt-bindings: arm: fsl: imx6ul-kontron: Update bindings
dt-bindings: clk: imx8mm: don't use multiple blank lines
dt-bindings: soc: imx: add interconnect property for i.MX8MP hsio blk ctrl
dt-bindings: soc: imx: add interconnect property for i.MX8MP hdmi blk ctrl
dt-bindings: soc: imx: add interconnect property for i.MX8MP media blk ctrl
Link: https://lore.kernel.org/r/20220918092806.2152700-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 23 Sep 2022 13:43:43 +0000 (15:43 +0200)]
Merge tag 'tegra-for-6.1-arm64-dt' of git://git./linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v6.1-rc1
These changes enable PCI, Ethernet and HDA support on Jetson AGX Orin.
DMA support is enabled for I2C on a number of SoC generations and the
Google Pixel C (a.k.a. Smaug) device receives Bluetooth and Wi-Fi
support.
Other than that this also contains some minor cleanups and fixes.
* tag 'tegra-for-6.1-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add GPCDMA support for Tegra I2C
arm64: tegra: Add iommus for HDA on Tegra234
arm64: tegra: Enable HDA node for Jetson AGX Orin
arm64: tegra: Add context isolation domains on Tegra234
arm64: tegra: Fixup iommu-map property formatting
arm64: dts: tegra: smaug: Add Wi-Fi node
arm64: dts: tegra: smaug: Add Bluetooth node
arm64: tegra: Enable MGBE on Jetson AGX Orin Developer Kit
arm64: tegra: Add MGBE nodes on Tegra234
arm64: tegra: Fix up compatible for Tegra234 GPCDMA
arm64: tegra: Enable PCIe slots in P3737-0000 board
arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT
arm64: tegra: Add regulators required for PCIe
Link: https://lore.kernel.org/r/20220916101957.1635854-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 23 Sep 2022 13:42:42 +0000 (15:42 +0200)]
Merge tag 'tegra-for-6.1-dt-bindings' of git://git./linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v6.1-rc1
Adds device tree bindings for the MGBE found on Tegra234 SoCs, as well
as stream IDs for the shared host1x context devices.
* tag 'tegra-for-6.1-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: Add Host1x context stream IDs on Tegra234
dt-bindings: net: Add Tegra234 MGBE
Link: https://lore.kernel.org/r/20220916101957.1635854-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Matt Ranostay [Mon, 19 Sep 2022 20:57:23 +0000 (13:57 -0700)]
arm64: dts: ti: k3-j7200: fix main pinmux range
Range size of 0x2b4 was incorrect since there isn't 173 configurable
pins for muxing. Additionally there is a non-addressable region in the
mapping which requires splitting into two ranges.
main_pmx0 -> 67 pins
main_pmx1 -> 3 pins
Fixes:
d361ed88455f ("arm64: dts: ti: Add support for J7200 SoC")
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Tested-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://lore.kernel.org/r/20220919205723.8342-1-mranostay@ti.com
Lad Prabhakar [Fri, 16 Sep 2022 10:02:51 +0000 (11:02 +0100)]
arm64: dts: renesas: Adjust whitespace around '{'
Drop extra space around the '{' sign. No functional changes (same DTB).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220916100251.20329-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Lad Prabhakar [Thu, 15 Sep 2022 16:52:55 +0000 (17:52 +0100)]
arm64: dts: renesas: rzg2ul-smarc: Include SoM DTSI into board DTS
Move including the rzg2ul-smarc-som.dtsi from the carrier board
rzg2ul-smarc.dtsi to the actual RZ/G2UL SMARC EVK board dts
r9a07g043u11-smarc.dts. Also move the SW_SW0_DEV_SEL and
SW_ET0_EN_N macros to board dts as they are used by SoM and carrier
board DTS/I.
This is in preparation of re-using the SoM and carrier board DTSIs
for RZ/Five SMARC EVK.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220915165256.352843-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Lad Prabhakar [Wed, 14 Sep 2022 13:42:11 +0000 (14:42 +0100)]
arm64: dts: renesas: rzg2ul-smarc-som: Drop enabling wdt2
WDT CH2 is specifically to check the operation of Cortex-M33 CPU so
don't enable WDT2 by default.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220914134211.199631-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Geert Uytterhoeven [Wed, 14 Sep 2022 14:21:54 +0000 (16:21 +0200)]
ARM: dts: renesas: Fix USB PHY device and child node names
make dtbs_check:
usb-phy@
e6590100: '#phy-cells' is a required property
From schema: dtschema/schemas/phy/phy-provider.yaml
The R-Car Gen2 USB PHY device nodes do not represent USB PHYs
theirselves, and thus do not have "#phy-cells" properties. Fix the
warning by renaming them from "usb-phy" to "usb-phy-controller".
Rename their child nodes from "usb-channel" to "usb-phy", as these do
represent USB PHYs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/6442b4042e26537abc8632c4772f8201685f1f1f.1663165098.git.geert+renesas@glider.be
Geert Uytterhoeven [Wed, 14 Sep 2022 14:15:14 +0000 (16:15 +0200)]
arm64: dts: renesas: r8a779a0: Update to R-Car Gen4 compatible values
Despite the name, R-Car V3U is the first member of the R-Car Gen4
family. Hence update the compatible properties in various device nodes
to include family-specific compatible values for R-Car Gen4 instead of
R-Car Gen3:
- CMT,
- SDHI.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/f14fde21270bf8269a61a75fc6e50af2765f2a42.1663164707.git.geert+renesas@glider.be
Kuninori Morimoto [Tue, 13 Sep 2022 02:07:13 +0000 (02:07 +0000)]
arm64: dts: renesas: white-hawk-cpu: Add missing bootargs
This patch adds missing bootargs for R-Car V4H White Hawk board.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k06858oe.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Kuninori Morimoto [Tue, 13 Sep 2022 02:06:55 +0000 (02:06 +0000)]
arm64: dts: renesas: spider-cpu: Add missing bootargs
This patch adds missing bootargs for R-Car S4 Spider board.
One note is that current Spider board doesn't have Ethernet
support yet, but this patch adds standard settings for it, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87leqo58ox.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Geert Uytterhoeven [Wed, 14 Sep 2022 15:01:29 +0000 (17:01 +0200)]
arm64: dts: renesas: spider: Move aliases and chosen
The serial console and serial debug ports on Spider are located on the
CPU board. Hence move the aliases and chosen nodes containing serial
port configuration from the main Spider DTS file to the DTS file that
describes the CPU board.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/c03500bb10eae10caeb3f4f97bc979eeee6cce75.1663167551.git.geert+renesas@glider.be
Geert Uytterhoeven [Fri, 9 Sep 2022 09:54:01 +0000 (11:54 +0200)]
arm64: dts: renesas: white-hawk-cpu: Add Ethernet support
Describe the wiring of the first Ethernet AVB instance to the Micrel
KSZ9031RNXVB PHY.
Based on a larger patch in the BSP by Takeshi Kihara.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/50a31bc8267ab4c90bff27ef3aca1169f8ebc7ae.1662715538.git.geert+renesas@glider.be
Geert Uytterhoeven [Fri, 9 Sep 2022 09:54:00 +0000 (11:54 +0200)]
arm64: dts: renesas: white-hawk: Move aliases and chosen
The serial console port on White Hawk is located on the CPU board.
Hence move the aliases and chosen nodes containing serial console
configuration from the main White Hawk DTS file to the DTS file that
describes the CPU board.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b03b74f4b5ee3c3e828e753beb334ec43162c132.1662715538.git.geert+renesas@glider.be
Geert Uytterhoeven [Fri, 9 Sep 2022 09:53:59 +0000 (11:53 +0200)]
arm64: dts: renesas: r8a779g0: Add RAVB nodes
Add device nodes for the Renesas Ethernet AVB (EtherAVB-IF) blocks on
the Renesas R-Car V4H (R8A779G0) SoC.
Based on a larger patch in the BSP by Takeshi Kihara.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/980e7a62d8dc3a1e2387a2d93a6296625b105506.1662715538.git.geert+renesas@glider.be
Geert Uytterhoeven [Fri, 9 Sep 2022 09:53:58 +0000 (11:53 +0200)]
arm64: dts: renesas: white-hawk-cpu: Add push switches
Describe the three Push Switches on the White Hawk CPU board, so
they can be used for user input.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e18d0d5087a514db611295f5d1e13c950cf7dae7.1662715538.git.geert+renesas@glider.be
Geert Uytterhoeven [Fri, 9 Sep 2022 09:53:57 +0000 (11:53 +0200)]
arm64: dts: renesas: white-hawk-cpu: Add GP LEDs
Describe the three General Purpose LEDs on the White Hawk CPU board, so
they can be used as indicator LEDs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/007acd941ef925057f1f9b925ed4e339dbd29a74.1662715538.git.geert+renesas@glider.be
Geert Uytterhoeven [Fri, 9 Sep 2022 09:53:56 +0000 (11:53 +0200)]
arm64: dts: renesas: r8a779g0: Add GPIO nodes
Add device nodes for the General Purpose Input/Output (GPIO) blocks on
the Renesas R-Car V4H (R8A779G0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/81176a5e12a5828cdcdd4b107d0b2e5970232c31.1662715538.git.geert+renesas@glider.be
Samuel Holland [Mon, 15 Aug 2022 04:12:39 +0000 (23:12 -0500)]
dt-bindings: sram: sunxi-sram: Add D1 compatible string
D1 needs to export a register for managing some LDO regulators, so it
needs a unique compatible.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220815041248.53268-3-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Samuel Holland [Mon, 15 Aug 2022 04:12:38 +0000 (23:12 -0500)]
dt-bindings: sram: sunxi-sram: Clean up the compatible lists
Use enumerations where appropriate to combine "const" choices and
deduplicate fallback compatible strings.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20220815041248.53268-2-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Geert Uytterhoeven [Fri, 9 Sep 2022 09:53:55 +0000 (11:53 +0200)]
arm64: dts: renesas: white-hawk: Add Ethernet sub-board
Add a DTS file for the R-Car V4H White Hawk RAVB/Ethernet(1000Base-T1)
sub-board (RTP8A779G0ASKB0SE0SA000), and include it from the main
r8a779g0-white-hawk.dts.
For now its contents are limited to the Board ID EEPROM.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/991600919513dd05a9a7d9c170c6924baf14d1a2.1662715538.git.geert+renesas@glider.be
Geert Uytterhoeven [Fri, 9 Sep 2022 09:53:54 +0000 (11:53 +0200)]
arm64: dts: renesas: white-hawk: Add CSI/DSI sub-board
Add a DTS file for the R-Car V4H White Hawk CSI/DSI sub-board
(RTP8A779G0ASKB0SC0SA000), and include it from the main
r8a779g0-white-hawk.dts.
For now its contents are limited to the Board ID EEPROM.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/265f7782743c539c57906e8207785f8b0d80d5d0.1662715538.git.geert+renesas@glider.be
Geert Uytterhoeven [Fri, 9 Sep 2022 09:53:53 +0000 (11:53 +0200)]
arm64: dts: renesas: white-hawk: Add I2C0 and EEPROMs
Enable the I2C0 bus on the White Hawk CPU board, and describe the I2C
EEPROMs present on the White Hawk CPU and BreakOut boards.
Based on a larger patch in the BSP by Takeshi Kihara.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/d01cada6f2d3e44dd6cb26cfa8e4ce6382f1fbff.1662715538.git.geert+renesas@glider.be
Geert Uytterhoeven [Fri, 9 Sep 2022 09:53:52 +0000 (11:53 +0200)]
arm64: dts: renesas: r8a779g0: Add I2C nodes
Add device nodes for the I2C Bus Interfaces on the Renesas R-Car V4H
(R8A779G0) SoC.
Extracted from a larger patch in the BSP by Takeshi Kihara.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/272fd18fed2d7addfbdb7945ae2134988a7c3a7e.1662715538.git.geert+renesas@glider.be
Geert Uytterhoeven [Fri, 9 Sep 2022 09:53:51 +0000 (11:53 +0200)]
arm64: dts: renesas: white-hawk-cpu: Add serial port pin control
Complete the description of the serial console and the external serial
clock by adding pin control.
Based on larger patch in the BSP by Takeshi Kihara.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/74c862ef6e46b4af398d9b371ff38fae17b3db05.1662715538.git.geert+renesas@glider.be
Geert Uytterhoeven [Fri, 9 Sep 2022 09:53:50 +0000 (11:53 +0200)]
arm64: dts: renesas: r8a779g0: Add pinctrl device node
Add a device node for the Pin Function Controller on the Renesas R-Car
V4H (R8A779G0) SoC.
Based on a larger patch in the BSP by Takeshi Kihara.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ecddcadd2fad46b1cf4c9be3ec750f360b9730e4.1662715538.git.geert+renesas@glider.be
Geert Uytterhoeven [Fri, 9 Sep 2022 09:53:49 +0000 (11:53 +0200)]
arm64: dts: renesas: white-hawk-cpu: Enable watchdog timer
Enable the watchdog timer on the White Hawk CPU board.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/77a0e29d965032115de1f07ceecb2d5d07db74eb.1662715538.git.geert+renesas@glider.be
Geert Uytterhoeven [Fri, 9 Sep 2022 09:53:48 +0000 (11:53 +0200)]
arm64: dts: renesas: r8a779g0: Add RWDT node
Add a device node for the RCLK Watchdog Timer (RWDT) on the Renesas
R-Car V4H (R8A779G0) SoC.
Based on a patch in the BSP by Thanh Quan.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/187904c279be6654ea3deb11b7250b64dd18c3b5.1662715538.git.geert+renesas@glider.be
Arnd Bergmann [Sat, 17 Sep 2022 18:02:30 +0000 (20:02 +0200)]
Merge tag 'at91-dt-6.1-2' of https://git./linux/kernel/git/at91/linux into arm/dt
AT91 DT for v6.1 #2
It contains:
- new SAMA5D3 based board, namely SAMA5D3-EDS
- adjustments to pass the DT binding validations
- disable AES on some LAN966 based boards as they are reserverd by
secure OS
* tag 'at91-dt-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
spi: dt-bindings: atmel,at91rm9200-spi: Add DMA related properties
ARM: dts: at91: Add `atmel,usart-mode` required property to serial nodes
ARM: dts: at91: sam9x60ek: Add DBGU compatibles to uart1
ARM: dts: at91: sama7g5: Swap rx and tx for spi11
dts: arm: at91: Add SAMA5D3-EDS Board
dt-bindings: arm: at91: Add info on SAMA5D3-EDS
ARM: dts: lan966x: disable aes
Link: https://lore.kernel.org/r/20220916105407.1287452-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pankaj Bansal [Thu, 15 Sep 2022 23:34:32 +0000 (18:34 -0500)]
arm64: dts: ls1046a-qds: Modify the qspi flash frequency
The qspi flash in ls1046a QDS board can operate at 50MHz frequency.
Therefore, update the maximum supported freq in dts file.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Li Yang [Thu, 15 Sep 2022 23:34:31 +0000 (18:34 -0500)]
arm64: dts: ls1046a-qds: add mmio based mdio-mux nodes for FPGA
There is mmio based mdio mux function in the FPGA device on ls1046a-qds
board. Add the mmio based mdio-mux nodes to ls1043a-qds boards and
add simple-mfd as a compatbile for the FPGA node to reflect the
multi-function nature of it.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Li Yang [Thu, 15 Sep 2022 23:34:30 +0000 (18:34 -0500)]
arm64: dts: ls1046a: add gpios based i2c recovery information
Add scl-gpios property for i2c recovery and add SoC specific
compatible string for SoC specific fixup.
Signed-off-by: Zhang Ying <ying.zhang22455@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Laurentiu Tudor [Thu, 15 Sep 2022 23:34:29 +0000 (18:34 -0500)]
arm64: dts: ls1046a: use a pseudo-bus to constrain usb and sata dma size
Wrap the usb and sata controllers in an intermediate simple-bus and use
it to constrain the dma address size of these usb controllers to the 40
bits that they generate toward the interconnect. This is required
because the SoC uses 48 bits address sizes and this mismatch would lead
to smmu context faults because the usb generates 40-bit addresses while
the smmu page tables are populated with 48-bit wide addresses.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Li Yang [Thu, 15 Sep 2022 23:34:28 +0000 (18:34 -0500)]
arm64: dts: ls1046a: make dma-coherent global to the SoC
These SoCs are really completely dma coherent in their entirety so add
the dma-coherent property at the soc level in the device tree and drop
the instances where it's specifically added to a few select devices.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Laurentiu Tudor [Thu, 15 Sep 2022 23:34:27 +0000 (18:34 -0500)]
arm64: dts: ls1046a: add missing dma ranges property
These chips have a 48-bit address size so make sure that the dma-ranges
reflects this. Otherwise the linux kernel's dma sub-system will set
the default dma masks to full 64-bit, badly breaking dmas.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Hou Zhiqiang [Thu, 15 Sep 2022 23:34:26 +0000 (18:34 -0500)]
arm64: dts: ls1046a: Add big-endian property for PCIe nodes
Add the big-endian property for LS1046A PCIe RC nodes.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Xiaowei Bao [Thu, 15 Sep 2022 23:34:25 +0000 (18:34 -0500)]
arm64: dts: ls1046a: Add the PME interrupt and big-endian to PCIe EP nodes
Add the PME interrupt porperty and big-endian property in PCIe EP nodes.
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Li Yang [Thu, 15 Sep 2022 23:34:24 +0000 (18:34 -0500)]
arm64: dts: ls1046a: Enable usb3-lpm-capable for usb3 node
Enable USB3 HW LPM feature for ls1046a.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Li Yang [Wed, 14 Sep 2022 21:47:03 +0000 (16:47 -0500)]
arm64: dts: ls1043a-rdb: add pcf85263 rtc node
Add the missing node for rtc device under i2c and fix style problems at
the same time.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Li Yang [Wed, 14 Sep 2022 21:47:02 +0000 (16:47 -0500)]
arm64: dts: ls1043a-qds: add mmio based mdio-mux support
There is mmio based mdio mux function in the FPGA device on ls1043a-qds
board. Add the mmio based mdio-mux nodes to ls1043a-qds boards and
add simple-mfd as a compatbile for the FPGA node to reflect the
multi-function nature of it. Also connect the ethernet interfaces to
these phy interfaces.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Laurentiu Tudor [Wed, 14 Sep 2022 21:47:01 +0000 (16:47 -0500)]
arm64: dts: ls1043a: use a pseudo-bus to constrain usb and sata dma size
Wrap the usb and sata controllers in an intermediate simple-bus and use
it to constrain the dma address size of these usb controllers to the 40
bits that they generate toward the interconnect. This is required
because the SoC uses 48 bits address sizes and this mismatch would lead
to smmu context faults because the usb generates 40-bit addresses while
the smmu page tables are populated with 48-bit wide addresses.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Li Yang [Wed, 14 Sep 2022 21:47:00 +0000 (16:47 -0500)]
arm64: dts: ls1043a: add gpio based i2c recovery information
Add scl-gpios property for i2c recovery and add SoC specific compatible
string for SoC specific fixup.
Signed-off-by: Zhang Ying <ying.zhang22455@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Li Yang [Wed, 14 Sep 2022 21:46:59 +0000 (16:46 -0500)]
arm64: dts: ls1043a: make dma-coherent global to the SoC
ls1043a is really completely dma coherent in their entirety so add the
dma-coherent property at the soc level in the device tree and drop the
instances where it's specifically added to a few select devices.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Laurentiu Tudor [Wed, 14 Sep 2022 21:46:58 +0000 (16:46 -0500)]
arm64: dts: ls1043a: add missing dma ranges property
ls1043a has a 48-bit address size so make sure that the dma-ranges
reflects this. Otherwise the linux kernel's dma sub-system will set the
default dma masks to full 64-bit, badly breaking dmas.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Hou Zhiqiang [Wed, 14 Sep 2022 21:46:57 +0000 (16:46 -0500)]
arm64: dts: ls1043a: Add big-endian property for PCIe nodes
Add the big-endian property for LS1043A PCIe nodes for accessing PEX_LUT
and PF register block.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Hou Zhiqiang [Wed, 14 Sep 2022 21:46:56 +0000 (16:46 -0500)]
arm64: dts: ls1043a: Add SCFG phandle for PCIe nodes
The LS1043A PCIe controller has some control registers
in SCFG block, so add the SCFG phandle for each PCIe
controller node.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Li Yang [Wed, 14 Sep 2022 21:46:55 +0000 (16:46 -0500)]
arm64: dts: ls1043a: use pcie aer/pme interrupts
After the binding has been updated to include more specific interrupt
definition, update the dts to use the more specific interrupt names.
Signed-off-by: Po Liu <po.liu@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Li Yang [Wed, 14 Sep 2022 21:46:54 +0000 (16:46 -0500)]
arm64: dts: ls1043a: Enable usb3-lpm-capable for usb3 node
Enable USB3 HW LPM feature for ls1043a.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Li Yang [Wed, 14 Sep 2022 21:46:53 +0000 (16:46 -0500)]
arm64: dts: ls1043a: fix the wrong size of dcfg space
The size of the block should be 0x1000 instead of 0x10000.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pankaj Bansal [Wed, 14 Sep 2022 21:15:38 +0000 (16:15 -0500)]
arm64: dts: ls208x: remove NXP Erratum A008585 from LS2088A.
NXP Erratum A008585 affects A57 core cluster used in LS2085 rev1.
However this problem has been fixed in A72 core cluster used in LS2088.
Therefore remove the erratum from LS2088A. Keeping it only in LS2085.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: Sandeep Malik <sandeep.malik@nxp.com>
Acked-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Biwen Li [Wed, 14 Sep 2022 21:15:37 +0000 (16:15 -0500)]
arm64: dts: ls208xa-rdb: fix errata E-00013
Specify a channel zero in idle state to avoid enterring tri-stated state
for PCA9547.
Some information about E-00013:
- Description: I2C1 and I2C3 buses are missing pull-up.
- Impact: When the PCA954x device is tri-stated, the I2C bus will float.
This makes the I2C bus and its associated downstream devices
inaccessible.
- Hardware fix: Populate resistors R189 and R190 for I2C1 and resistors
R228 and R229 for I2C3.
- Software fix: Remove the tri-state option from the PCA954x
driver(PCA954x always on enable status, specify a channel zero in dts to
fix the errata E-00013).
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Priyanka Jain [Wed, 14 Sep 2022 21:15:36 +0000 (16:15 -0500)]
arm64: dts: ls2081a-rdb: Add DTS for NXP LS2081ARDB
This patch adds support for NXP LS2081ARDB board which has LS2081A SoC.
LS2081A SoC is 40-pin derivative of LS2088A SoC. From functional
perspective both are same. Hence, LS2088a SoC dtsi file is included
from LS2081ARDB dts.
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
Signed-off-by: Tao Yang <b31903@freescale.com>
Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Ioana Radulescu [Wed, 14 Sep 2022 21:15:35 +0000 (16:15 -0500)]
arm64: dts: ls2080a-rdb: add phy nodes
Define PHY nodes on the board.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Li Yang [Wed, 14 Sep 2022 21:15:34 +0000 (16:15 -0500)]
arm64: dts: ls208xa-qds: add mdio mux nodes from on-board FPGA
Update the cpld node name to be generic board-contrl and add mmio mdio
mux nodes from the on-board FPGA.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Thu, 8 Sep 2022 15:49:03 +0000 (08:49 -0700)]
arm64: dts: imx8mp-venice-gw74xx: add PCIe support
Add PCIe support on the Gateworks GW74xx board. While at it,
fix the related gpio line names from the previous incorrect values.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Shenwei Wang [Wed, 14 Sep 2022 13:58:48 +0000 (08:58 -0500)]
arm64: dts: freescale: add support for i.MX8DXL EVK board
This is to support the EVK (Evaluation Kit Board) for the i.MX8DXL.
The patch has enabled the serial console, SD/EMMC interface, and
the eqos and fec ethernet network.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Shenwei Wang [Wed, 14 Sep 2022 13:58:47 +0000 (08:58 -0500)]
arm64: dts: freescale: add i.MX8DXL SoC support
i.MX8DXL is a device targeting the automotive and industrial market
segments. The chip is designed to achieve both high performance and
low power consumption. It has a dual (2x) Cortex-A35 processor.
This patch adds the basic support for i.MX8DXL SoC.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Shenwei Wang [Wed, 14 Sep 2022 13:58:46 +0000 (08:58 -0500)]
arm64: dts: imx8: add a node label to ddr-pmu
The ddr-pmu on i.mx8dxl has a different interrupt number.
Add a node label to ddr-pmu so that it could be referred
and changed in i.mx8dxl dts.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Mon, 12 Sep 2022 18:18:19 +0000 (11:18 -0700)]
arm64: dts: imx: Add i.mx8mm Gateworks gw7904 dts support
The GW7904 is based on the i.MX 8M Mini SoC featuring:
- LPDDR4 DRAM
- eMMC FLASH
- microSD connector with UHS support
- LIS2DE12 3-axis accelerometer
- Gateworks System Controller
- IMX8M FEC
- 2x RS232 off-board connectors
- PMIC
- 10x bi-color LED's
- 1x miniPCIe socket with PCIe and USB2.0
- 802.3at Class 4 PoE
- 10-30VDC input via barrel-jack
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Mon, 12 Sep 2022 18:08:36 +0000 (11:08 -0700)]
arm64: dts: imx8mp-venice-gw74xx: add WiFi/BT module support
The GW74xx supports an on-board Laird Connectivity Sterling LWB5+ module
which uses a Cypress CYW4373W chip to provide 1x1 802.11 a/b/g/n/ac +
Bluetooth 5.2.
Add the proper device-tree nodes for it.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Mon, 12 Sep 2022 18:08:35 +0000 (11:08 -0700)]
arm64: dts: imx8mp-venice-gw74xx: add cpu-supply node for cpufreq
Add regulator config for cpu-supply in order to support cpufreq.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Thu, 8 Sep 2022 15:42:27 +0000 (08:42 -0700)]
arm64: dts: imx8mp-venice-gw74xx: add USB DR support
Add support for USB DR on USB1 interface. Host/Device detection is done
using the usb-role-switch connector with a GPIO as USB1_OTG_ID is not
connected internally.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 12 Sep 2022 10:02:34 +0000 (18:02 +0800)]
arm64: dts: imx93: add mediamix blk ctrl node
Add i.MX93 mediamix blk ctrl node
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Tue, 6 Sep 2022 03:28:16 +0000 (11:28 +0800)]
arm64: dts: imx93: add src node
Add i.MX93 SRC node
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Vladimir Oltean [Mon, 5 Sep 2022 21:24:58 +0000 (00:24 +0300)]
arm64: dts: ls1028a-rdb: add more ethernet aliases
Commit "arm64: dts: ls1028a: enable swp5 and eno3 for all boards" which
Shawn declared as applied, but for which I can't find a sha1sum, has
enabled a new Ethernet port on the LS1028A-RDB (&enetc_port3), but
U-Boot, which passes a MAC address to Linux' device tree through the
/aliases node, fails to do this for this newly enabled port.
Fix that by adding more ethernet aliases in the only
backwards-compatible way possible: at the end of the current list.
And since it is possible to very easily convert either swp4 or swp5 to
DSA user ports now (which have a MAC address of their own), using these
U-Boot commands:
=> fdt addr $fdt_addr_r
=> fdt rm /soc/pcie@
1f0000000/ethernet-switch@0,5/ports/port@4 ethernet
it would be good if those DSA user ports (swp4, swp5) gained a valid MAC
address from U-Boot as well. In order for that to work properly,
provision two more ethernet aliases for &mscc_felix_port{4,5} as well.
The resulting ordering is slightly unusual, but to me looks more natural
than eno0, eno2, swp0, swp1, swp2, swp3, eno3, swp4, swp5.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Joy Zou [Mon, 5 Sep 2022 08:39:23 +0000 (16:39 +0800)]
arm64: dts: imx8mq: update sdma node name format
Node names should be generic, so change the sdma node name format 'sdma'
into 'dma-controller'.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 5 Sep 2022 05:59:15 +0000 (13:59 +0800)]
arm64: dts: imx93: add lpspi nodes
Add i.MX93 lpspi nodes
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 5 Sep 2022 05:59:14 +0000 (13:59 +0800)]
arm64: dts: imx93: add lpi2c nodes
Add i.MX93 lpi2c nodes
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 5 Sep 2022 05:59:13 +0000 (13:59 +0800)]
arm64: dts: imx93: add a55 pmu
Add A55 PMU node for perf usage
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 5 Sep 2022 05:59:12 +0000 (13:59 +0800)]
arm64: dts: imx93: add blk ctrl node
Add i.MX93 BLK CTRL MIX node
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 5 Sep 2022 05:59:11 +0000 (13:59 +0800)]
arm64: dts: imx93: add s4 mu node
Add s4 mu node for sentinel communication
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 5 Sep 2022 05:59:10 +0000 (13:59 +0800)]
arm64: dts: imx93: add gpio clk
Add the GPIO clk, otherwise GPIO may not work if clk driver disable the
GPIO clk during kernel boot.
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Mon, 5 Sep 2022 05:59:09 +0000 (13:59 +0800)]
arm64: dts: imx93: correct SDHC clk entry
DUMMY clk only works with clk_ignore_unused and bootloader enables those
clks that required for SDHC work properly.
Correct SDHC clk entry with real clk.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Alexander Stein [Mon, 5 Sep 2022 07:37:30 +0000 (09:37 +0200)]
arm64: dts: tqma8mpql: add USB DR support
Add support for USB DR on USB1 interface. Host/Device detection is done
using the usb-role-switch connector.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Philippe Schenker [Thu, 1 Sep 2022 10:01:50 +0000 (12:01 +0200)]
arm64: dts: verdin-imx8mm: introduce hdmi-connector
The Lontium LT8912B driver needs a HDMI connector to be connected to
port 1. Introduce this connector to be enabled in a device tree overlay.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Marcel Ziswiler [Thu, 1 Sep 2022 10:01:49 +0000 (12:01 +0200)]
arm64: dts: verdin-imx8mm: add lvds panel node
Add an LVDS panel node to be extended by a device tree overlay.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Marcel Ziswiler [Thu, 1 Sep 2022 10:01:48 +0000 (12:01 +0200)]
arm64: dts: verdin-imx8mm: rename sn65dsi83 to sn65dsi84
Rename sn65dsi83 to sn65dsi84 as that is the exact chip used on the
Verdin DSI to LVDS Adapter.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Clark Wang [Wed, 31 Aug 2022 14:25:52 +0000 (22:25 +0800)]
arm64: dts: imx8ulp: increase the clock speed of LPSPI
LPSPI transfer max speed is half of the root clock.
Increase the root clock speed to support faster data transmission.
And update the parent clock of all i2c/spi with IMX8ULP_CLK_FROSC_DIV2
which could produce accurate clock for i2c/spi usage.
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Wed, 31 Aug 2022 14:25:51 +0000 (22:25 +0800)]
arm64: dts: imx8ulp: add mailbox node
Add Sentinel Message Unit(MU), Generic MU nodes.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Wed, 31 Aug 2022 14:25:50 +0000 (22:25 +0800)]
arm64: dts: imx8ulp: add pmu node
Add i.MX8ULP pmu node
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Wed, 31 Aug 2022 14:25:48 +0000 (22:25 +0800)]
arm64: dts: imx8ulp: correct the scmi sram node name
Follow sram/sram.yaml to update the sram node name.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Wed, 31 Aug 2022 14:25:47 +0000 (22:25 +0800)]
arm64: dts: imx8ulp: drop undocumented property in cgc
The clocks and clocks-names are not documented in binding doc,
and the clk-imx8ulp driver not use the undocumented property,
so drop them.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Martin Kepplinger [Fri, 2 Sep 2022 08:42:16 +0000 (10:42 +0200)]
arm64: dts: imx8mq-librem5: fix mipi_csi description
Properties are not documented so lead to the following error:
'#address-cells', '#size-cells', 'interrupts' do not match any of the regexes: 'pinctrl-[0-9]+'
Fix this by removing unneeded properties.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Angus Ainslie [Fri, 2 Sep 2022 08:42:15 +0000 (10:42 +0200)]
arm64: dts: imx8mq-librem5: add usb-role-switch property to dwc3
In order to enable (PD and data) role switching on the Librem 5 phone,
add the usb-role-switch property to imx8mq's dwc3 node.
Signed-off-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Angus Ainslie [Fri, 2 Sep 2022 08:42:14 +0000 (10:42 +0200)]
arm64: dts: imx8mq-librem5: add USB type-c properties for role switching
Add the connector properties to the USB type-c stanza to enable (PD)
role-switching on the Librem 5 phone.
Signed-off-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Sebastian Krzyszkowiak [Fri, 2 Sep 2022 08:42:13 +0000 (10:42 +0200)]
arm64: dts: imx8mq-librem5: Add bq25895 as max17055's power supply
This allows the userspace to notice that there's not enough
current provided to charge the battery, and also fixes issues
with 0% SOC values being considered invalid.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Guido Günther [Fri, 2 Sep 2022 08:42:12 +0000 (10:42 +0200)]
arm64: dts: imx8mq-librem5: add RGB pwm notification leds
Describe the RGB notification leds on the Librem 5 phone.
Use the common defines so we're sure to adhere to the common patterns,
use predefined led colors and functions so we're being warned in case
of deprecations.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Martin Kepplinger [Fri, 2 Sep 2022 08:42:11 +0000 (10:42 +0200)]
arm64: dts: imx8mq-librem5: describe the voice coil motor for focus control
Describe the focus motor that will be used for the rear camera - even
though the rear camera sensor driver is not yet in the mainline. The
focus motor is a separate device and can be controlled already.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Vladimir Oltean [Wed, 31 Aug 2022 16:01:24 +0000 (19:01 +0300)]
arm64: dts: ls1028a: enable swp5 and eno3 for all boards
In order for the LS1028A based boards to benefit from support for
multiple CPU ports, the second DSA master and its associated CPU port
must be enabled in the device trees. This does not change the default
CPU port from the current port 4.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Vladimir Oltean [Wed, 31 Aug 2022 16:01:23 +0000 (19:01 +0300)]
arm64: dts: ls1028a: mark enetc port 3 as a DSA master too
The LS1028A switch has 2 internal links to the ENETC controller.
With DSA's ability to support multiple CPU ports, we should mark both
ENETC ports as DSA masters.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>