Anton Khirnov [Fri, 24 Feb 2012 13:14:24 +0000 (14:14 +0100)]
avconv: set discard on input streams automatically.
Reinhard Tartler [Sun, 26 Feb 2012 09:50:45 +0000 (10:50 +0100)]
Fix parser not to clobber has_b_frames when extradata is set.
Because in contrast to the decoder, the parser does not setup low_delay.
The code in parse_nal_units would always end up setting has_b_frames
to "1", except when stream is explicitly marked as low delay.
Since the parser itself would create 'extradata', simply reopening
the parser would cause this.
This happens for instance in estimate_timings_from_pts(), which causes the
parser to be reopened on the same stream.
This fixes Libav #22 and FFmpeg (trac) #360
CC: libav-stable@libav.org
Based on a patch by Reimar Döffinger <Reimar.Doeffinger@gmx.de>
(commit
31ac0ac29b6bba744493f7d1040757a3f51b9ad7)
Comments and description adapted by Reinhard Tartler.
Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Anton Khirnov [Mon, 28 Nov 2011 08:31:48 +0000 (09:31 +0100)]
lavf: don't set codec timebase in avformat_find_stream_info().
It's not supposed to be set outside of lavc.
Anton Khirnov [Tue, 7 Feb 2012 10:03:33 +0000 (11:03 +0100)]
avconv: saner output video timebase.
r_frame_rate should in theory have something to do with input framerate,
but in practice it is often made up from thin air by lavf. So unless we
are targeting a constant output framerate, it's better to just use input
stream timebase.
Brings back dropped frames in nuv and cscd tests introduced in
cd1ad18a6539bd7fc2dc4c1740fbcbd498c0c0a2
Anton Khirnov [Tue, 7 Feb 2012 07:13:05 +0000 (08:13 +0100)]
rawdec: set timebase to 1/fps.
Anton Khirnov [Mon, 6 Feb 2012 20:47:41 +0000 (21:47 +0100)]
avconv: refactor vsync code.
No functional changes, just make it more readable.
Anton Khirnov [Fri, 24 Feb 2012 18:24:27 +0000 (19:24 +0100)]
FATE: remove a bunch of useless -vsync 0
No changes in the test results.
Paul B Mahol [Sat, 25 Feb 2012 17:16:41 +0000 (17:16 +0000)]
cdxl: bit line plane arrangement support
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
Paul B Mahol [Sat, 25 Feb 2012 17:16:40 +0000 (17:16 +0000)]
cdxl: remove early check for bpp
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
Paul B Mahol [Sat, 25 Feb 2012 17:16:39 +0000 (17:16 +0000)]
cdxl: set pix_fmt PAL8 only if palette is available
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
Tim Walker [Sat, 25 Feb 2012 21:33:48 +0000 (22:33 +0100)]
mlp_parser: fix the channel mask value used for the top surround channel
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
Justin Ruggles [Thu, 23 Feb 2012 00:23:18 +0000 (19:23 -0500)]
vorbisenc: check all allocations for failure
Justin Ruggles [Wed, 22 Feb 2012 23:33:39 +0000 (18:33 -0500)]
roqaudioenc: return AVERROR codes instead of -1
Justin Ruggles [Wed, 22 Feb 2012 23:32:19 +0000 (18:32 -0500)]
roqaudioenc: set correct bit rate
Justin Ruggles [Wed, 22 Feb 2012 21:20:49 +0000 (16:20 -0500)]
roqaudioenc: use AVCodecContext.frame_size correctly.
It is not allowed to change mid-stream like it does currently. Instead we need
to buffer the first 8 frames before returning them as a single packet, then
only return single frame packets after that.
Justin Ruggles [Wed, 22 Feb 2012 18:40:03 +0000 (13:40 -0500)]
roqaudioenc: remove unneeded sample_fmt check
Justin Ruggles [Wed, 22 Feb 2012 18:35:38 +0000 (13:35 -0500)]
ra144enc: use int16_t* for input samples rather than void*
Justin Ruggles [Wed, 22 Feb 2012 18:29:09 +0000 (13:29 -0500)]
ra144enc: set AVCodecContext.coded_frame
Justin Ruggles [Wed, 22 Feb 2012 18:10:38 +0000 (13:10 -0500)]
ra144enc: remove unneeded sample_fmt check
Justin Ruggles [Tue, 21 Feb 2012 23:47:50 +0000 (18:47 -0500)]
nellymoserenc: set AVCodecContext.coded_frame
Justin Ruggles [Tue, 21 Feb 2012 23:46:00 +0000 (18:46 -0500)]
nellymoserenc: improve error checking in encode_init()
Justin Ruggles [Tue, 21 Feb 2012 23:42:32 +0000 (18:42 -0500)]
nellymoserenc: return AVERROR codes instead of -1
Justin Ruggles [Tue, 21 Feb 2012 23:40:22 +0000 (18:40 -0500)]
libvorbis: improve error checking in oggvorbis_encode_init()
Justin Ruggles [Tue, 21 Feb 2012 20:27:23 +0000 (15:27 -0500)]
mpegaudioenc: return AVERROR codes instead of -1
Justin Ruggles [Thu, 16 Feb 2012 00:06:34 +0000 (19:06 -0500)]
libfaac: improve error checking and handling in Faac_encode_init()
Justin Ruggles [Sat, 25 Feb 2012 04:27:14 +0000 (23:27 -0500)]
avutil: add AVERROR_UNKNOWN
Useful to return instead of -1 when the cause of the error is unknown,
typically from an external library.
Justin Ruggles [Thu, 16 Feb 2012 00:26:09 +0000 (19:26 -0500)]
check for coded_frame allocation failure in several audio encoders
Justin Ruggles [Thu, 16 Feb 2012 00:11:06 +0000 (19:11 -0500)]
audio encoders: do not set coded_frame->key_frame.
it is already set in avcodec_alloc_frame()
Justin Ruggles [Mon, 20 Feb 2012 18:12:37 +0000 (13:12 -0500)]
g722enc: check for trellis data allocation error
Justin Ruggles [Fri, 10 Feb 2012 02:03:02 +0000 (21:03 -0500)]
libspeexenc: export encoder delay through AVCodecContext.delay
Justin Ruggles [Mon, 20 Feb 2012 21:52:27 +0000 (16:52 -0500)]
avcodec: document the use of AVCodecContext.delay for audio encoders
Ronald S. Bultje [Sat, 25 Feb 2012 00:27:53 +0000 (16:27 -0800)]
kgv1: release reference picture on size change.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Ronald S. Bultje [Sat, 25 Feb 2012 00:12:18 +0000 (16:12 -0800)]
matroska: don't overwrite string values until read/alloc was succesful.
This prevents certain tags with a default value assigned to them (as per
the EBML syntax elements) from ever being assigned a NULL value. Other
parts of the code rely on these being non-NULL (i.e. they don't check for
NULL before e.g. using the string in strcmp() or similar), and thus in
effect this prevents crashes when reading of such specific tags fails,
either because of low memory or because of targeted file corruption.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Anton Khirnov [Fri, 24 Feb 2012 12:07:57 +0000 (13:07 +0100)]
lavc: merge two if()s with the same condition.
Anton Khirnov [Fri, 24 Feb 2012 12:06:23 +0000 (13:06 +0100)]
lavc: factorize setting got_packet_ptr in avcodec_encode_video2()
Anton Khirnov [Fri, 24 Feb 2012 12:02:05 +0000 (13:02 +0100)]
lavc: signal no output when a NULL frame is passed to audio encoder without delay
Paul B Mahol [Fri, 24 Feb 2012 04:53:26 +0000 (04:53 +0000)]
xwdenc: fix monow encoding
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Paul B Mahol [Tue, 21 Feb 2012 21:44:21 +0000 (21:44 +0000)]
fate: add tests for cdxl video
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
Paul B Mahol [Tue, 21 Feb 2012 20:41:14 +0000 (20:41 +0000)]
cdxl: fix ham6/8 on big endian
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Justin Ruggles <justin.ruggles@gmail.com>
Ronald S. Bultje [Fri, 24 Feb 2012 23:32:25 +0000 (15:32 -0800)]
swscale: fix another integer overflow at large dimensions/rescales.
Justin Ruggles [Tue, 24 Jan 2012 23:10:28 +0000 (18:10 -0500)]
vorbisdec: add a flush() function
clear MDCT overlap buffer and reset previous window mode when seeking
Ronald S. Bultje [Fri, 24 Feb 2012 22:11:04 +0000 (14:11 -0800)]
fraps: release reference buffer on pix_fmt change.
Prevents crash when trying to copy from a non-existing plane in e.g.
a RGB32 reference image to a YUV420P target image
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Ronald S. Bultje [Fri, 17 Feb 2012 22:48:57 +0000 (14:48 -0800)]
avcodec: disallow reget_buffer() if pix_fmt changed.
Ronald S. Bultje [Thu, 29 Dec 2011 17:07:32 +0000 (09:07 -0800)]
kgv1: use avctx->get/release_buffer().
Also fixes crashes on corrupt bitstreams.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
John Van Sickle [Fri, 24 Feb 2012 18:46:48 +0000 (13:46 -0500)]
docs: use -bsf:[vas] instead of -[vas]bsf.
The latter syntax is now invalid.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Dale Curtis [Fri, 24 Feb 2012 18:17:39 +0000 (13:17 -0500)]
mpegaudiodec: Prevent premature clipping of mp3 input buffer.
Instead of clipping extrasize based on EXTRABYTES, clip based on the
amount of buffer actually left. Without this fix, there are warbles
and other distortions in the test case below.
http://kevincennis.com/mix/assets/sounds/1901_voxfx.mp3
Anton Khirnov [Wed, 15 Feb 2012 07:38:51 +0000 (08:38 +0100)]
lavf: move the packet keyframe setting code.
compute_pkt_fields() is for unreliable estimates or guessing. The
keyframe information from the parser is (at least in theory) reliable,
so it should be used even when the other guessing is disabled with the
AVFMT_FLAG_NOFILLIN flag.
Therefore, move setting the packet keyframe flag based on parser
information from compute_pkt_fields() to read_frame_internal().
Justin Ruggles [Thu, 23 Feb 2012 00:31:40 +0000 (19:31 -0500)]
oggenc: free comment header for all codecs
fixes a memleak for Vorbis and Theora, where the comment header from
avpriv_split_xiph_headers() is replaced by a buffer that must be freed
separately.
Ronald S. Bultje [Fri, 24 Feb 2012 00:09:36 +0000 (16:09 -0800)]
lcl: error out if uncompressed input buffer is smaller than framesize.
This prevents crashes when trying to read beyond the end of the buffer
while decoding frame data.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Ronald S. Bultje [Thu, 23 Feb 2012 20:22:40 +0000 (12:22 -0800)]
mjpeg: abort decoding if packet is too large.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Ronald S. Bultje [Fri, 17 Feb 2012 20:54:37 +0000 (12:54 -0800)]
golomb: use HAVE_BITS_REMAINING() macro to prevent infloop on EOF.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Ronald S. Bultje [Wed, 22 Feb 2012 20:09:33 +0000 (12:09 -0800)]
get_bits: add HAVE_BITS_REMAINING macro.
Anton Khirnov [Fri, 24 Feb 2012 07:59:38 +0000 (08:59 +0100)]
lavf/output-example: use new audio encoding API correctly.
Anton Khirnov [Sat, 28 Jan 2012 19:12:45 +0000 (20:12 +0100)]
lavf/output-example: more proper usage of the new API.
Passing the codec into avformat_new_stream() is preferred.
Alex Converse [Thu, 23 Feb 2012 18:47:50 +0000 (10:47 -0800)]
tiff: Prevent overreads in the type_sizes array.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Alex Converse [Thu, 23 Feb 2012 18:22:51 +0000 (10:22 -0800)]
tiff: Make the TIFF_LONG and TIFF_SHORT types unsigned.
TIFF v6.0 (unimplemented) adds signed equivalents.
Paul B Mahol [Fri, 24 Feb 2012 00:15:36 +0000 (00:15 +0000)]
apetag: do not leak memory if avio_read() fails
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Ronald S. Bultje [Thu, 23 Feb 2012 23:35:24 +0000 (15:35 -0800)]
apetag: propagate errors.
Fixes crashes if reading the tag value fails.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Christophe GISQUET [Thu, 23 Feb 2012 19:12:39 +0000 (20:12 +0100)]
SBR DSP x86: implement SSE sbr_hf_g_filt
Unrolling the main loop to process, instead of 4 elements:
- 8: minor gain of 2 cycles (not worth the extra object size)
- 2: loss of 8 cycles.
Assigning STEP to a register is a loss. Output address (Y) is almost always
unaligned.
Timings:
- C (32/64 bits): 117/109 cycles
- SSE: 57 cycles
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Christophe GISQUET [Thu, 23 Feb 2012 18:48:58 +0000 (19:48 +0100)]
SBR DSP x86: implement SSE sbr_sum_square_sse
The 32bits targets have been compiled with -mfpmath=sse for proper reference.
sbr_sum_square C /32bits: 82c (unrolled)/102c
C /64bits: 69c (unrolled)/82c
SSE/32bits: 42c
SSE/64bits: 31c
Use of SSE4.1 dpps to perform the final sum is slower.
Not unrolling to perform 8 operations in a loop yields 10 more cycles.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Christophe GISQUET [Thu, 23 Feb 2012 21:25:48 +0000 (22:25 +0100)]
SBR DSP: use intptr_t for the ixh parameter.
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Ronald S. Bultje [Thu, 23 Feb 2012 19:53:27 +0000 (11:53 -0800)]
swf: check return values for av_get/new_packet().
Prevents crashers when using the packet if allocation failed.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Derek Buitenhuis [Thu, 23 Feb 2012 15:55:35 +0000 (10:55 -0500)]
wavpack: Don't shift minclip/maxclip
Since we are clipping before we shift the values to
16 or 32 bits, we should not shift the min/max clip
values to compensate.
Fixes 8 and 24 bit lossy decoding.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Martin Storsjö [Thu, 23 Feb 2012 09:56:15 +0000 (11:56 +0200)]
rtpenc: Expose the max packet size via an avoption
This allows opting for a lower MTU than what the AVIOContext
indicated, and allows writing into outputs that don't indicate
an MTU at all (such as plain files, which is useful for testing).
This also allows querying for the MTU via the avoption.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Thu, 23 Feb 2012 09:54:13 +0000 (11:54 +0200)]
rtpenc: Move max_packet_size to a context variable
This is in preparation for exposing this via an avoption.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Thu, 9 Feb 2012 21:28:15 +0000 (23:28 +0200)]
rtpenc: Add an option for not sending RTCP packets
Signed-off-by: Martin Storsjö <martin@martin.st>
Anton Khirnov [Thu, 23 Feb 2012 10:02:11 +0000 (11:02 +0100)]
lavc: drop encode() support for video.
All video encoders have been converted to encode2(), all new encoders
should also use only encode2().
Anton Khirnov [Thu, 23 Feb 2012 09:59:22 +0000 (10:59 +0100)]
snowenc: switch to encode2().
Anton Khirnov [Thu, 23 Feb 2012 09:47:30 +0000 (10:47 +0100)]
snowenc: don't abuse input picture for storing information.
Anton Khirnov [Thu, 23 Feb 2012 09:21:07 +0000 (10:21 +0100)]
a64multienc: switch to encode2().
We have no decoder, so cannot test if the output is decodable.
Anton Khirnov [Thu, 23 Feb 2012 09:04:57 +0000 (10:04 +0100)]
a64multienc: don't write into output buffer when there's no output.
Anton Khirnov [Thu, 23 Feb 2012 07:19:13 +0000 (08:19 +0100)]
libxvid: switch to encode2().
Anton Khirnov [Thu, 23 Feb 2012 08:00:34 +0000 (09:00 +0100)]
tiffenc: switch to encode2().
Anton Khirnov [Thu, 23 Feb 2012 07:51:45 +0000 (08:51 +0100)]
tiffenc: properly forward error codes in encode_frame().
Anton Khirnov [Wed, 22 Feb 2012 20:19:35 +0000 (21:19 +0100)]
lavc: drop libdirac encoder.
Libschroedinger is the preferred way to encode dirac video now, it
produces better output and has a nicer API.
Anton Khirnov [Thu, 5 Jan 2012 15:55:33 +0000 (16:55 +0100)]
gifenc: switch to encode2().
Anton Khirnov [Wed, 22 Feb 2012 06:38:13 +0000 (07:38 +0100)]
libvpxenc: switch to encode2().
Anton Khirnov [Mon, 20 Feb 2012 12:21:58 +0000 (13:21 +0100)]
flashsvenc: switch to encode2().
Diego Biurrun [Thu, 23 Feb 2012 16:17:01 +0000 (17:17 +0100)]
Remove libpostproc.
This library does not fit into Libav as a whole and its code is just a
maintenance burden. Furthermore it is now available as an external project,
which completely obviates any reason to keep it around.
URL: http://git.videolan.org/?p=libpostproc.git
Ronald S. Bultje [Wed, 22 Feb 2012 22:22:56 +0000 (14:22 -0800)]
lcl: don't overwrite input memory.
If the PNG filter is enabled, a PNG-style filter will run over the
input buffer, writing into the buffer. Therefore, if no zlib compression
was used, ensure that we copy into a temporary buffer, otherwise we
overwrite user-provided input data.
Ronald S. Bultje [Thu, 23 Feb 2012 00:48:38 +0000 (16:48 -0800)]
swscale: take first/lastline over/underflows into account for MMX.
Fixes crashes for extremely large resizes (several 100-fold).
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Ronald S. Bultje [Thu, 23 Feb 2012 00:47:14 +0000 (16:47 -0800)]
swscale: fix underflows in firstline calculations for extreme resizes.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Ronald S. Bultje [Thu, 23 Feb 2012 00:46:31 +0000 (16:46 -0800)]
swscale: fix overflows in filterPos[] calculation for large sizes.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Anton Khirnov [Wed, 22 Feb 2012 06:38:13 +0000 (07:38 +0100)]
libxavs: switch to encode2().
Anton Khirnov [Tue, 21 Feb 2012 21:57:59 +0000 (22:57 +0100)]
libxavs: add an AVClass at the beginning of XavsContext.
Anton Khirnov [Mon, 6 Feb 2012 06:34:57 +0000 (07:34 +0100)]
libxavs: split extradata writing out of encode_nals().
This is done in preparation for the following patch implementing
encode2().
This commit is analogous to
05d699222dd5af4f5775f9890aa825ede05a144f for
libx264.
Anton Khirnov [Mon, 20 Feb 2012 12:21:58 +0000 (13:21 +0100)]
ljpegenc: switch to encode2().
Ronald S. Bultje [Wed, 22 Feb 2012 20:19:52 +0000 (12:19 -0800)]
truemotion2: error out if the huffman tree has no nodes.
This prevents crashers and errors further down when reading nodes in the
empty tree.
Found-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Martin Storsjö [Sat, 4 Sep 2010 22:10:54 +0000 (01:10 +0300)]
rtpenc: Add an error message
Also return a proper error code.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Tue, 7 Feb 2012 14:39:14 +0000 (16:39 +0200)]
rtpenc: Allow packetizing H263 according to the old RFC 2190
According to newer RFCs, this packetization scheme should only
be used for interfacing with legacy systems.
Implementing this packetization mode properly requires parsing
the full H263 bitstream to find macroblock boundaries (and knowing
their macroblock and gob numbers and motion vector predictors).
This implementation tries to look for GOB headers (which
can be inserted by using -ps <small number>), but if the GOBs
aren't small enough to fit into the MTU, the packetizer blindly
splits packets at any offset and claims it to be a GOB boundary
(by using Mode A from the RFC). While not correct, this seems
to work with some receivers.
Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Thu, 23 Feb 2012 09:38:24 +0000 (11:38 +0200)]
rtpenc: Move the trailing comma into FF_RTP_FLAG_OPTS
This simplifies adding more flags to the macro.
Signed-off-by: Martin Storsjö <martin@martin.st>
Anton Khirnov [Wed, 22 Feb 2012 06:38:13 +0000 (07:38 +0100)]
asv1enc: switch to encode2().
Anton Khirnov [Mon, 20 Feb 2012 12:21:58 +0000 (13:21 +0100)]
libschroedingerenc: switch to encode2().
Anton Khirnov [Sun, 12 Feb 2012 08:32:40 +0000 (09:32 +0100)]
ffv1enc: switch to encode2().
Anton Khirnov [Sun, 12 Feb 2012 08:32:40 +0000 (09:32 +0100)]
libtheoraenc: switch to encode2().
Anton Khirnov [Wed, 22 Feb 2012 06:38:13 +0000 (07:38 +0100)]
jpeglsenc: switch to encode2().
Anton Khirnov [Mon, 20 Feb 2012 12:21:58 +0000 (13:21 +0100)]
lclenc: switch to encode2().
Anton Khirnov [Sun, 12 Feb 2012 08:32:40 +0000 (09:32 +0100)]
qtrleenc: switch to encode2().
Justin Ruggles [Fri, 10 Feb 2012 03:44:10 +0000 (22:44 -0500)]
flacdec: set channel_layout based on channel count
Channel layouts are specified in the FLAC format description at
http://flac.sourceforge.net/format.html
fixes Bug 209
Justin Ruggles [Sun, 12 Feb 2012 20:06:58 +0000 (15:06 -0500)]
mov: set channel layout for AC-3 streams based on the 'dac3' atom info
fixes Bug 225