ASoC: cs35l33: Fix GPIO name and drop legacy include

[ Upstream commit 50678d339d670a92658e5538ebee30447c88ccb3 ]

This driver includes the legacy GPIO APIs <linux/gpio.h> and
<linux/of_gpio.h> but does not use any symbols from any of
them.

Drop the includes.

Further the driver is requesting "reset-gpios" rather than
just "reset" from the GPIO framework. This is wrong because
the gpiolib core will add "-gpios" before processing the
request from e.g. device tree. Drop the suffix.

The last problem means that the optional RESET GPIO has
never been properly retrieved and used even if it existed,
but nobody noticed.

Fixes: 3333cb7187b9 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.")
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-2-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/imx/lcdc: Fix double-free of driver data

[ Upstream commit ff3670877e7c73d06c2a835d9abb62efcae0145c ]

The struct imx_lcdc driver data is allocated using devm_drm_dev_alloc()
so it must not be explicitly kfree()d.

Also drm_kms_helper_poll_fini() should not be called as there is no
matching drm_kms_helper_poll_init(). So drop the release function
completely.

Fixes: c87e859cdeb5 ("drm/imx/lcdc: Implement DRM driver for imx25")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706092731.2630232-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/tidss: Fix dss reset

[ Upstream commit bc288a927815efcf9d7f4a54d4d89c5df478c635 ]

The probe function calls dispc_softreset() before runtime PM is enabled
and without enabling any of the DSS clocks. This happens to work by
luck, and we need to make sure the DSS HW is active and the fclk is
enabled.

To fix the above, add a new function, dispc_init_hw(), which does:

- pm_runtime_set_active()
- clk_prepare_enable(fclk)
- dispc_softreset().

This ensures that the reset can be successfully accomplished.

Note that we use pm_runtime_set_active(), not the normal
pm_runtime_get(). The reason for this is that at this point we haven't
enabled the runtime PM yet and also we don't want the normal resume
callback to be called: the dispc resume callback does some initial HW
setup, and it expects that the HW was off (no video ports are
streaming). If the bootloader has enabled the DSS and has set up a
boot time splash-screen, the DSS would be enabled and streaming which
might lead to issues with the normal resume callback.

Fixes: c9b2d923befd ("drm/tidss: Soft Reset DISPC on startup")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-8-ac91b5ea35c0@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/tidss: Check for K2G in in dispc_softreset()

[ Upstream commit 151825150cf9c2e9fb90763d35b9dff3783628ac ]

K2G doesn't have softreset feature. Instead of having every caller of
dispc_softreset() check for K2G, move the check into dispc_softreset(),
and make dispc_softreset() return 0 in case of K2G.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-6-ac91b5ea35c0@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Stable-dep-of: bc288a927815 ("drm/tidss: Fix dss reset")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/tidss: Return error value from from softreset

[ Upstream commit aceafbb5035c4bfc75a321863ed1e393d644d2d2 ]

Return an error value from dispc_softreset() so that the caller can
handle the errors.

Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-5-ac91b5ea35c0@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Stable-dep-of: bc288a927815 ("drm/tidss: Fix dss reset")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/tidss: Move reset to the end of dispc_init()

[ Upstream commit 36d1e0852680aa038e2428d450673390111b165c ]

We do a DSS reset in the middle of the dispc_init(). While that happens
to work now, we should really make sure that e..g the fclk, which is
acquired only later in the function, is enabled when doing a reset. This
will be handled in a later patch, but for now, let's move the
dispc_softreset() call to the end of dispc_init(), which is a sensible
place for it anyway.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231109-tidss-probe-v2-4-ac91b5ea35c0@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Stable-dep-of: bc288a927815 ("drm/tidss: Fix dss reset")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/radeon: check return value of radeon_ring_lock()

[ Upstream commit 71225e1c930942cb1e042fc08c5cc0c4ef30e95e ]

In the unlikely event of radeon_ring_lock() failing, its errno return
value should be processed. This patch checks said return value and
prints a debug message in case of an error.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 48c0c902e2e6 ("drm/radeon/kms: add support for CP setup on SI")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/radeon/r100: Fix integer overflow issues in r100_cs_track_check()

[ Upstream commit b5c5baa458faa5430c445acd9a17481274d77ccf ]

It may be possible, albeit unlikely, to encounter integer overflow
during the multiplication of several unsigned int variables, the
result being assigned to a variable 'size' of wider type.

Prevent this potential behaviour by converting one of the multiples
to unsigned long.

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 0242f74d29df ("drm/radeon: clean up CS functions in r100.c")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/radeon/r600_cs: Fix possible int overflows in r600_cs_check_reg()

[ Upstream commit 39c960bbf9d9ea862398759e75736cfb68c3446f ]

While improbable, there may be a chance of hitting integer
overflow when the result of radeon_get_ib_value() gets shifted
left.

Avoid it by casting one of the operands to larger data type (u64).

Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.

Fixes: 1729dd33d20b ("drm/radeon/kms: r600 CS parser fixes")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to avoid dirent corruption

[ Upstream commit 53edb549565f55ccd0bdf43be3d66ce4c2d48b28 ]

As Al reported in link[1]:

f2fs_rename()
...
if (old_dir != new_dir && !whiteout)
f2fs_set_link(old_inode, old_dir_entry,
old_dir_page, new_dir);
else
f2fs_put_page(old_dir_page, 0);

You want correct inumber in the ".." link.  And cross-directory
rename does move the source to new parent, even if you'd been asked
to leave a whiteout in the old place.

[1] https://lore.kernel.org/all/20231017055040.GN800259@ZenIV/

With below testcase, it may cause dirent corruption, due to it missed
to call f2fs_set_link() to update ".." link to new directory.
- mkdir -p dir/foo
- renameat2 -w dir/foo bar

[ASSERT] (__chk_dots_dentries:1421)  --> Bad inode number[0x4] for '..', parent parent ino is [0x3]
[FSCK] other corrupted bugs                           [Fail]

Fixes: 7e01e7ad746b ("f2fs: support RENAME_WHITEOUT")
Cc: Jan Kara <jack@suse.cz>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: Fix typo in post_disable() description

[ Upstream commit 288b039db225676e0c520c981a1b5a2562d893a3 ]

s/singals/signals/

Fixes: 199e4e967af4 ("drm: Extract drm_bridge.h")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231124094253.658064-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: amphion: Fix VPU core alias name

[ Upstream commit f033c87fda47e272bb4f75dc7b03677261d91158 ]

Starting with commit f6038de293f2 ("arm64: dts: imx8qm: Fix VPU core
alias name") the alias for VPU cores uses dashes instead of underscores.
Adjust the alias stem accordingly. Fixes the errors:
amphion-vpu-core 2d040000.vpu-core: can't get vpu core id
amphion-vpu-core 2d050000.vpu-core: can't get vpu core id

Fixes: f6038de293f2 ("arm64: dts: imx8qm: Fix VPU core alias name")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: rkvdec: Hook the (TRY_)DECODER_CMD stateless ioctls

[ Upstream commit 1fb7b5ab62113b29ce331464048d8c39e58fd08a ]

The (TRY_)DECODER_CMD ioctls are used to support flushing when holding
capture buffers is supported. This is the case of this driver but the
ioctls were never hooked to the ioctl ops.

Add them to correctly support flushing.

Fixes: ed7bb87d3d03 ("media: rkvdec: Enable capture buffer holding for H264")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: verisilicon: Hook the (TRY_)DECODER_CMD stateless ioctls

[ Upstream commit 6c0d9e12b1d12bbd95484e4b99f63feeb423765f ]

The (TRY_)DECODER_CMD ioctls are used to support flushing when holding
capture buffers is supported. This is the case of this driver but the
ioctls were never hooked to the ioctl ops.

Add them to correctly support flushing.

Fixes: 340ce50f75a6 ("media: hantro: Enable HOLD_CAPTURE_BUF for H.264")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: visl: Hook the (TRY_)DECODER_CMD stateless ioctls

[ Upstream commit 3907f6ef8e0d55a88cdb0f7238363d24e26790ca ]

The (TRY_)DECODER_CMD ioctls are used to support flushing when holding
capture buffers is supported. This is the case of this driver but the
ioctls were never hooked to the ioctl ops.

Add them to correctly support flushing.

Fixes: 0c078e310b6d ("media: visl: add virtual stateless decoder driver")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mtk-jpeg: Remove cancel worker in mtk_jpeg_remove to avoid the crash of multi-core JPEG devices

[ Upstream commit d8212c5c87c143ca01b78f6bf61244af07e0058e ]

This patch reverts commit c677d7ae8314
("media: mtk-jpeg: Fix use after free bug due to uncanceled work").
The job_timeout_work is initialized only for
the single-core JPEG device so it will cause the crash for multi-core
JPEG devices.

Fix it by removing the cancel_delayed_work_sync function.

Fixes: c677d7ae8314 ("media: mtk-jpeg: Fix use after free bug due to uncanceled work")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: pvrusb2: fix use after free on context disconnection

[ Upstream commit ded85b0c0edd8f45fec88783d7555a5b982449c1 ]

Upon module load, a kthread is created targeting the
pvr2_context_thread_func function, which may call pvr2_context_destroy
and thus call kfree() on the context object. However, that might happen
before the usb hub_event handler is able to notify the driver. This
patch adds a sanity check before the invalid read reported by syzbot,
within the context disconnection call stack.

Reported-and-tested-by: syzbot+621409285c4156a009b3@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000a02a4205fff8eb92@google.com/

Fixes: e5be15c63804 ("V4L/DVB (7711): pvrusb2: Fix race on module unload")
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/tilcdc: Fix irq free on unload

[ Upstream commit 38360bf96d816e175bc602c4ee76953cd303b71d ]

The driver only frees the reserved irq if priv->irq_enabled is set to
true. However, the driver mistakenly sets priv->irq_enabled to false,
instead of true, in tilcdc_irq_install(), and thus the driver never
frees the irq, causing issues on loading the driver a second time.

Fixes: b6366814fa77 ("drm/tilcdc: Convert to Linux IRQ interfaces")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919-lcdc-v1-1-ba60da7421e1@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tpd12s015: Drop buggy __exit annotation for remove function

[ Upstream commit ce3e112e7ae854249d8755906acc5f27e1542114 ]

With tpd12s015_remove() marked with __exit this function is discarded
when the driver is compiled as a built-in. The result is that when the
driver unbinds there is no cleanup done which results in resource
leakage or worse.

Fixes: cff5e6f7e83f ("drm/bridge: Add driver for the TI TPD12S015 HDMI level shifter")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102165640.3307820-19-u.kleine-koenig@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/fence:: fix warning directly dereferencing a rcu pointer

[ Upstream commit 5f35a624c1e30b5bae5023b3c256e94e0ad4f806 ]

Fix a sparse warning with this message
"warning:dereference of noderef expression". In this context it means we
are dereferencing a __rcu tagged pointer directly.

We should not be directly dereferencing a rcu pointer. To get a normal
(non __rcu tagged pointer) from a __rcu tagged pointer we are using the
function unrcu_pointer(...). The non __rcu tagged pointer then can be
dereferenced just like a normal pointer.

I tested with qemu with this command
qemu-system-x86_64 \
-m 2G \
-smp 2 \
-kernel bzImage \
-append "console=ttyS0 root=/dev/sda earlyprintk=serial net.ifnames=0" \
-drive file=bullseye.img,format=raw \
-net user,host=10.0.2.10,hostfwd=tcp:127.0.0.1:10021-:22 \
-net nic,model=e1000 \
-enable-kvm \
-nographic \
-pidfile vm.pid \
2>&1 | tee vm.log
with lockdep enabled.

Fixes: 0ec5f02f0e2c ("drm/nouveau: prevent stale fence->channel pointers, and protect with rcu")
Signed-off-by: Abhinav Singh <singhabhinav9051571833@gmail.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231113191303.3277733-1-singhabhinav9051571833@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel-elida-kd35t133: hold panel in reset for unprepare

[ Upstream commit 03c5b2a5f6c39fe4e090346536cf1c14ee18b61e ]

For devices like the Anbernic RG351M and RG351P the panel is wired to
an always on regulator. When the device suspends and wakes up, there
are some slight artifacts on the screen that go away over time. If
instead we hold the panel in reset status after it is unprepared,
this does not happen.

Fixes: 5b6603360c12 ("drm/panel: add panel driver for Elida KD35T133 panels")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20231117194405.1386265-3-macroalpha82@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231117194405.1386265-3-macroalpha82@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: nv3051d: Hold panel in reset for unprepare

[ Upstream commit 697ebc319b942403a6fee894607fd2cd47cca069 ]

Improve the panel's ability to restore from suspend by holding the
panel in suspend after unprepare.

Fixes: b1d39f0f4264 ("drm/panel: Add NewVision NV3051D MIPI-DSI LCD panel")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://lore.kernel.org/r/20231117202536.1387815-3-macroalpha82@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231117202536.1387815-3-macroalpha82@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/hns: Fix inappropriate err code for unsupported operations

[ Upstream commit f45b83ad39f8033e717b1eee57e81811113d5a84 ]

EOPNOTSUPP is more situable than EINVAL for allocating XRCD while XRC
is not supported and unsupported resizing SRQ.

Fixes: 32548870d438 ("RDMA/hns: Add support for XRC on HIP09")
Fixes: 221109e64316 ("RDMA/hns: Add interception for resizing SRQs")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231114123449.1106162-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/usnic: Silence uninitialized symbol smatch warnings

[ Upstream commit b9a85e5eec126d6ae6c362f94b447c223e8fe6e4 ]

The patch 1da177e4c3f4: "Linux-2.6.12-rc2" from Apr 16, 2005
(linux-next), leads to the following Smatch static checker warning:

        drivers/infiniband/hw/mthca/mthca_cmd.c:644 mthca_SYS_EN()
        error: uninitialized symbol 'out'.

drivers/infiniband/hw/mthca/mthca_cmd.c
    636 int mthca_SYS_EN(struct mthca_dev *dev)
    637 {
    638         u64 out;
    639         int ret;
    640
    641         ret = mthca_cmd_imm(dev, 0, &out, 0, 0, CMD_SYS_EN, CMD_TIME_CLASS_D);

We pass out here and it gets used without being initialized.

        err = mthca_cmd_post(dev, in_param,
                             out_param ? *out_param : 0,
                                         ^^^^^^^^^^
                             in_modifier, op_modifier,
                             op, context->token, 1);

It's the same in mthca_cmd_wait() and mthca_cmd_poll().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/533bc3df-8078-4397-b93d-d1f6cec9b636@moroto.mountain
Link: https://lore.kernel.org/r/c559cb7113158c02d75401ac162652072ef1b5f0.1699867650.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panfrost: Really power off GPU cores in panfrost_gpu_power_off()

[ Upstream commit 22aa1a209018dc2eca78745f7666db63637cd5dc ]

The layout of the registers {TILER,SHADER,L2}_PWROFF_LO, used to request
powering off cores, is the same as the {TILER,SHADER,L2}_PWRON_LO ones:
this means that in order to request poweroff of cores, we are supposed
to write a bitmask of cores that should be powered off!
This means that the panfrost_gpu_power_off() function has always been
doing nothing.

Fix powering off the GPU by writing a bitmask of the cores to poweroff
to the relevant PWROFF_LO registers and then check that the transition
(from ON to OFF) has finished by polling the relevant PWRTRANS_LO
registers.

While at it, in order to avoid code duplication, move the core mask
logic from panfrost_gpu_power_on() to a new panfrost_get_core_mask()
function, used in both poweron and poweroff.

Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231102141507.73481-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/dp_mst: Fix fractional DSC bpp handling

[ Upstream commit 7707dd6022593f3edd8e182e7935870cf326f874 ]

The current code does '(bpp << 4) / 16' in the MST PBN
calculation, but that is just the same as 'bpp' so the
DSC codepath achieves absolutely nothing. Fix it up so that
the fractional part of the bpp value is actually used instead
of truncated away. 64*1006 has enough zero lsbs that we can
just shift that down in the dividend and thus still manage
to stick to a 32bit divisor.

And while touching this, let's just make the whole thing more
straightforward by making the passed in bpp value .4 binary
fixed point always, instead of having to pass in different
things based on whether DSC is enabled or not.

v2:
- Fix DSC kunit test cases.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: David Francis <David.Francis@amd.com>
Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes: dc48529fb14e ("drm/dp_mst: Add PBN calculation for DSC modes")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[Imre: Fix kunit test cases]
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231030155843.2251023-3-imre.deak@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "drm/omapdrm: Annotate dma-fence critical section in commit path"

[ Upstream commit 9d7c8c066916f231ca0ed4e4fce6c4b58ca3e451 ]

This reverts commit 250aa22920cd5d956a5d3e9c6a43d671c2bae217.

The DMA-fence annotations cause a lockdep warning (see below). As per
https://patchwork.freedesktop.org/patch/462170/ it sounds like the
annotations don't work correctly.

======================================================
WARNING: possible circular locking dependency detected
6.5.0-rc2+ #2 Not tainted
------------------------------------------------------
kmstest/219 is trying to acquire lock:
c4705838 (&hdmi->lock){+.+.}-{3:3}, at: hdmi5_bridge_mode_set+0x1c/0x50

but task is already holding lock:
c11e1128 (dma_fence_map){++++}-{0:0}, at: omap_atomic_commit_tail+0x14/0xbc

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (dma_fence_map){++++}-{0:0}:
       __dma_fence_might_wait+0x48/0xb4
       dma_resv_lockdep+0x1b8/0x2bc
       do_one_initcall+0x68/0x3b0
       kernel_init_freeable+0x260/0x34c
       kernel_init+0x14/0x140
       ret_from_fork+0x14/0x28

-> #1 (fs_reclaim){+.+.}-{0:0}:
       fs_reclaim_acquire+0x70/0xa8
       __kmem_cache_alloc_node+0x3c/0x368
       kmalloc_trace+0x28/0x58
       _drm_do_get_edid+0x7c/0x35c
       hdmi5_bridge_get_edid+0xc8/0x1ac
       drm_bridge_connector_get_modes+0x64/0xc0
       drm_helper_probe_single_connector_modes+0x170/0x528
       drm_client_modeset_probe+0x208/0x1334
       __drm_fb_helper_initial_config_and_unlock+0x30/0x548
       omap_fbdev_client_hotplug+0x3c/0x6c
       drm_client_register+0x58/0x94
       pdev_probe+0x544/0x6b0
       platform_probe+0x58/0xbc
       really_probe+0xd8/0x3fc
       __driver_probe_device+0x94/0x1f4
       driver_probe_device+0x2c/0xc4
       __device_attach_driver+0xa4/0x11c
       bus_for_each_drv+0x84/0xdc
       __device_attach+0xac/0x20c
       bus_probe_device+0x8c/0x90
       device_add+0x588/0x7e0
       platform_device_add+0x110/0x24c
       platform_device_register_full+0x108/0x15c
       dss_bind+0x90/0xc0
       try_to_bring_up_aggregate_device+0x1e0/0x2c8
       __component_add+0xa4/0x174
       hdmi5_probe+0x1c8/0x270
       platform_probe+0x58/0xbc
       really_probe+0xd8/0x3fc
       __driver_probe_device+0x94/0x1f4
       driver_probe_device+0x2c/0xc4
       __device_attach_driver+0xa4/0x11c
       bus_for_each_drv+0x84/0xdc
       __device_attach+0xac/0x20c
       bus_probe_device+0x8c/0x90
       deferred_probe_work_func+0x8c/0xd8
       process_one_work+0x2ac/0x6e4
       worker_thread+0x30/0x4ec
       kthread+0x100/0x124
       ret_from_fork+0x14/0x28

-> #0 (&hdmi->lock){+.+.}-{3:3}:
       __lock_acquire+0x145c/0x29cc
       lock_acquire.part.0+0xb4/0x258
       __mutex_lock+0x90/0x950
       mutex_lock_nested+0x1c/0x24
       hdmi5_bridge_mode_set+0x1c/0x50
       drm_bridge_chain_mode_set+0x48/0x5c
       crtc_set_mode+0x188/0x1d0
       omap_atomic_commit_tail+0x2c/0xbc
       commit_tail+0x9c/0x188
       drm_atomic_helper_commit+0x158/0x18c
       drm_atomic_commit+0xa4/0xe8
       drm_mode_atomic_ioctl+0x9a4/0xc38
       drm_ioctl+0x210/0x4a8
       sys_ioctl+0x138/0xf00
       ret_fast_syscall+0x0/0x1c

other info that might help us debug this:

Chain exists of:
  &hdmi->lock --> fs_reclaim --> dma_fence_map

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  rlock(dma_fence_map);
                               lock(fs_reclaim);
                               lock(dma_fence_map);
  lock(&hdmi->lock);

 *** DEADLOCK ***

3 locks held by kmstest/219:
 #0: f1011de4 (crtc_ww_class_acquire){+.+.}-{0:0}, at: drm_mode_atomic_ioctl+0xf0/0xc38
 #1: c47059c8 (crtc_ww_class_mutex){+.+.}-{3:3}, at: modeset_lock+0xf8/0x230
 #2: c11e1128 (dma_fence_map){++++}-{0:0}, at: omap_atomic_commit_tail+0x14/0xbc

stack backtrace:
CPU: 1 PID: 219 Comm: kmstest Not tainted 6.5.0-rc2+ #2
Hardware name: Generic DRA74X (Flattened Device Tree)
 unwind_backtrace from show_stack+0x10/0x14
 show_stack from dump_stack_lvl+0x58/0x70
 dump_stack_lvl from check_noncircular+0x164/0x198
 check_noncircular from __lock_acquire+0x145c/0x29cc
 __lock_acquire from lock_acquire.part.0+0xb4/0x258
 lock_acquire.part.0 from __mutex_lock+0x90/0x950
 __mutex_lock from mutex_lock_nested+0x1c/0x24
 mutex_lock_nested from hdmi5_bridge_mode_set+0x1c/0x50
 hdmi5_bridge_mode_set from drm_bridge_chain_mode_set+0x48/0x5c
 drm_bridge_chain_mode_set from crtc_set_mode+0x188/0x1d0
 crtc_set_mode from omap_atomic_commit_tail+0x2c/0xbc
 omap_atomic_commit_tail from commit_tail+0x9c/0x188
 commit_tail from drm_atomic_helper_commit+0x158/0x18c
 drm_atomic_helper_commit from drm_atomic_commit+0xa4/0xe8
 drm_atomic_commit from drm_mode_atomic_ioctl+0x9a4/0xc38
 drm_mode_atomic_ioctl from drm_ioctl+0x210/0x4a8
 drm_ioctl from sys_ioctl+0x138/0xf00
 sys_ioctl from ret_fast_syscall+0x0/0x1c
Exception stack(0xf1011fa8 to 0xf1011ff0)
1fa0:                   00466d58 be9ab510 00000003 c03864bc be9ab510 be9ab4e0
1fc0: 00466d58 be9ab510 c03864bc 00000036 00466ef0 00466fc0 00467020 00466f20
1fe0: b6bc7ef4 be9ab4d0 b6bbbb00 b6cb2cc0

Fixes: 250aa22920cd ("drm/omapdrm: Annotate dma-fence critical section in commit path")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920-dma-fence-annotation-revert-v1-2-7ebf6f7f5bf6@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "drm/tidss: Annotate dma-fence critical section in commit path"

[ Upstream commit ca34d816558c3e4c3f8fe037b5a6b16c944693de ]

This reverts commit 4d56a4f08391857ba93465de489707b66adad114.

The DMA-fence annotations cause a lockdep warning (see below). As per
https://patchwork.freedesktop.org/patch/462170/ it sounds like the
annotations don't work correctly.

======================================================
WARNING: possible circular locking dependency detected
6.6.0-rc2+ #1 Not tainted
------------------------------------------------------
kmstest/733 is trying to acquire lock:
ffff8000819377f0 (fs_reclaim){+.+.}-{0:0}, at: __kmem_cache_alloc_node+0x58/0x2d4

but task is already holding lock:
ffff800081a06aa0 (dma_fence_map){++++}-{0:0}, at: tidss_atomic_commit_tail+0x20/0xc0 [tidss]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (dma_fence_map){++++}-{0:0}:
       __dma_fence_might_wait+0x5c/0xd0
       dma_resv_lockdep+0x1a4/0x32c
       do_one_initcall+0x84/0x2fc
       kernel_init_freeable+0x28c/0x4c4
       kernel_init+0x24/0x1dc
       ret_from_fork+0x10/0x20

-> #1 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}:
       fs_reclaim_acquire+0x70/0xe4
       __kmem_cache_alloc_node+0x58/0x2d4
       kmalloc_trace+0x38/0x78
       __kthread_create_worker+0x3c/0x150
       kthread_create_worker+0x64/0x8c
       workqueue_init+0x1e8/0x2f0
       kernel_init_freeable+0x11c/0x4c4
       kernel_init+0x24/0x1dc
       ret_from_fork+0x10/0x20

-> #0 (fs_reclaim){+.+.}-{0:0}:
       __lock_acquire+0x1370/0x20d8
       lock_acquire+0x1e8/0x308
       fs_reclaim_acquire+0xd0/0xe4
       __kmem_cache_alloc_node+0x58/0x2d4
       __kmalloc_node_track_caller+0x58/0xf0
       kmemdup+0x34/0x60
       regmap_bulk_write+0x64/0x2c0
       tc358768_bridge_pre_enable+0x8c/0x12d0 [tc358768]
       drm_atomic_bridge_call_pre_enable+0x68/0x80 [drm]
       drm_atomic_bridge_chain_pre_enable+0x50/0x158 [drm]
       drm_atomic_helper_commit_modeset_enables+0x164/0x264 [drm_kms_helper]
       tidss_atomic_commit_tail+0x58/0xc0 [tidss]
       commit_tail+0xa0/0x188 [drm_kms_helper]
       drm_atomic_helper_commit+0x1a8/0x1c0 [drm_kms_helper]
       drm_atomic_commit+0xa8/0xe0 [drm]
       drm_mode_atomic_ioctl+0x9ec/0xc80 [drm]
       drm_ioctl_kernel+0xc4/0x170 [drm]
       drm_ioctl+0x234/0x4b0 [drm]
       drm_compat_ioctl+0x110/0x12c [drm]
       __arm64_compat_sys_ioctl+0x128/0x150
       invoke_syscall+0x48/0x110
       el0_svc_common.constprop.0+0x40/0xe0
       do_el0_svc_compat+0x1c/0x38
       el0_svc_compat+0x48/0xb4
       el0t_32_sync_handler+0xb0/0x138
       el0t_32_sync+0x194/0x198

other info that might help us debug this:

Chain exists of:
  fs_reclaim --> mmu_notifier_invalidate_range_start --> dma_fence_map

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  rlock(dma_fence_map);
                               lock(mmu_notifier_invalidate_range_start);
                               lock(dma_fence_map);
  lock(fs_reclaim);

 *** DEADLOCK ***

3 locks held by kmstest/733:
 #0: ffff800082e5bba0 (crtc_ww_class_acquire){+.+.}-{0:0}, at: drm_mode_atomic_ioctl+0x118/0xc80 [drm]
 #1: ffff000004224c88 (crtc_ww_class_mutex){+.+.}-{3:3}, at: modeset_lock+0xdc/0x1a0 [drm]
 #2: ffff800081a06aa0 (dma_fence_map){++++}-{0:0}, at: tidss_atomic_commit_tail+0x20/0xc0 [tidss]

stack backtrace:
CPU: 0 PID: 733 Comm: kmstest Not tainted 6.6.0-rc2+ #1
Hardware name: Toradex Verdin AM62 on Verdin Development Board (DT)
Call trace:
 dump_backtrace+0x98/0x118
 show_stack+0x18/0x24
 dump_stack_lvl+0x60/0xac
 dump_stack+0x18/0x24
 print_circular_bug+0x288/0x368
 check_noncircular+0x168/0x17c
 __lock_acquire+0x1370/0x20d8
 lock_acquire+0x1e8/0x308
 fs_reclaim_acquire+0xd0/0xe4
 __kmem_cache_alloc_node+0x58/0x2d4
 __kmalloc_node_track_caller+0x58/0xf0
 kmemdup+0x34/0x60
 regmap_bulk_write+0x64/0x2c0
 tc358768_bridge_pre_enable+0x8c/0x12d0 [tc358768]
 drm_atomic_bridge_call_pre_enable+0x68/0x80 [drm]
 drm_atomic_bridge_chain_pre_enable+0x50/0x158 [drm]
 drm_atomic_helper_commit_modeset_enables+0x164/0x264 [drm_kms_helper]
 tidss_atomic_commit_tail+0x58/0xc0 [tidss]
 commit_tail+0xa0/0x188 [drm_kms_helper]
 drm_atomic_helper_commit+0x1a8/0x1c0 [drm_kms_helper]
 drm_atomic_commit+0xa8/0xe0 [drm]
 drm_mode_atomic_ioctl+0x9ec/0xc80 [drm]
 drm_ioctl_kernel+0xc4/0x170 [drm]
 drm_ioctl+0x234/0x4b0 [drm]
 drm_compat_ioctl+0x110/0x12c [drm]
 __arm64_compat_sys_ioctl+0x128/0x150
 invoke_syscall+0x48/0x110
 el0_svc_common.constprop.0+0x40/0xe0
 do_el0_svc_compat+0x1c/0x38
 el0_svc_compat+0x48/0xb4
 el0t_32_sync_handler+0xb0/0x138
 el0t_32_sync+0x194/0x198

Fixes: 4d56a4f08391 ("drm/tidss: Annotate dma-fence critical section in commit path")
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920-dma-fence-annotation-revert-v1-1-7ebf6f7f5bf6@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: davinci: always select CONFIG_CPU_ARM926T

[ Upstream commit 40974ee421b4d1fc74ac733d86899ce1b83d8f65 ]

The select was lost by accident during the multiplatform conversion.
Any davinci-only

arm-linux-gnueabi-ld: arch/arm/mach-davinci/sleep.o: in function `CACHE_FLUSH':
(.text+0x168): undefined reference to `arm926_flush_kern_cache_all'

Fixes: f962396ce292 ("ARM: davinci: support multiplatform build for ARM v5")
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240108110055.1531153-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ip6_tunnel: fix NEXTHDR_FRAGMENT handling in ip6_tnl_parse_tlv_enc_lim()

[ Upstream commit d375b98e0248980681e5e56b712026174d617198 ]

syzbot pointed out [1] that NEXTHDR_FRAGMENT handling is broken.

Reading frag_off can only be done if we pulled enough bytes
to skb->head. Currently we might access garbage.

[1]
BUG: KMSAN: uninit-value in ip6_tnl_parse_tlv_enc_lim+0x94f/0xbb0
ip6_tnl_parse_tlv_enc_lim+0x94f/0xbb0
ipxip6_tnl_xmit net/ipv6/ip6_tunnel.c:1326 [inline]
ip6_tnl_start_xmit+0xab2/0x1a70 net/ipv6/ip6_tunnel.c:1432
__netdev_start_xmit include/linux/netdevice.h:4940 [inline]
netdev_start_xmit include/linux/netdevice.h:4954 [inline]
xmit_one net/core/dev.c:3548 [inline]
dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564
__dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
neigh_connected_output+0x569/0x660 net/core/neighbour.c:1592
neigh_output include/net/neighbour.h:542 [inline]
ip6_finish_output2+0x23a9/0x2b30 net/ipv6/ip6_output.c:137
ip6_finish_output+0x855/0x12b0 net/ipv6/ip6_output.c:222
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip6_output+0x323/0x610 net/ipv6/ip6_output.c:243
dst_output include/net/dst.h:451 [inline]
ip6_local_out+0xe9/0x140 net/ipv6/output_core.c:155
ip6_send_skb net/ipv6/ip6_output.c:1952 [inline]
ip6_push_pending_frames+0x1f9/0x560 net/ipv6/ip6_output.c:1972
rawv6_push_pending_frames+0xbe8/0xdf0 net/ipv6/raw.c:582
rawv6_sendmsg+0x2b66/0x2e70 net/ipv6/raw.c:920
inet_sendmsg+0x105/0x190 net/ipv4/af_inet.c:847
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2674
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
slab_alloc_node mm/slub.c:3478 [inline]
__kmem_cache_alloc_node+0x5c9/0x970 mm/slub.c:3517
__do_kmalloc_node mm/slab_common.c:1006 [inline]
__kmalloc_node_track_caller+0x118/0x3c0 mm/slab_common.c:1027
kmalloc_reserve+0x249/0x4a0 net/core/skbuff.c:582
pskb_expand_head+0x226/0x1a00 net/core/skbuff.c:2098
__pskb_pull_tail+0x13b/0x2310 net/core/skbuff.c:2655
pskb_may_pull_reason include/linux/skbuff.h:2673 [inline]
pskb_may_pull include/linux/skbuff.h:2681 [inline]
ip6_tnl_parse_tlv_enc_lim+0x901/0xbb0 net/ipv6/ip6_tunnel.c:408
ipxip6_tnl_xmit net/ipv6/ip6_tunnel.c:1326 [inline]
ip6_tnl_start_xmit+0xab2/0x1a70 net/ipv6/ip6_tunnel.c:1432
__netdev_start_xmit include/linux/netdevice.h:4940 [inline]
netdev_start_xmit include/linux/netdevice.h:4954 [inline]
xmit_one net/core/dev.c:3548 [inline]
dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564
__dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
neigh_connected_output+0x569/0x660 net/core/neighbour.c:1592
neigh_output include/net/neighbour.h:542 [inline]
ip6_finish_output2+0x23a9/0x2b30 net/ipv6/ip6_output.c:137
ip6_finish_output+0x855/0x12b0 net/ipv6/ip6_output.c:222
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip6_output+0x323/0x610 net/ipv6/ip6_output.c:243
dst_output include/net/dst.h:451 [inline]
ip6_local_out+0xe9/0x140 net/ipv6/output_core.c:155
ip6_send_skb net/ipv6/ip6_output.c:1952 [inline]
ip6_push_pending_frames+0x1f9/0x560 net/ipv6/ip6_output.c:1972
rawv6_push_pending_frames+0xbe8/0xdf0 net/ipv6/raw.c:582
rawv6_sendmsg+0x2b66/0x2e70 net/ipv6/raw.c:920
inet_sendmsg+0x105/0x190 net/ipv4/af_inet.c:847
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2674
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b

CPU: 0 PID: 7345 Comm: syz-executor.3 Not tainted 6.7.0-rc8-syzkaller-00024-gac865f00af29 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023

Fixes: fbfa743a9d2a ("ipv6: fix ip6_tnl_parse_tlv_enc_lim()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rxrpc: Fix skbuff cleanup of call's recvmsg_queue and rx_oos_queue

[ Upstream commit 4fc68c4c1a114ba597b4f3b082f04622dfa0e0f6 ]

Fix rxrpc_cleanup_ring() to use rxrpc_purge_queue() rather than
skb_queue_purge() so that the count of outstanding skbuffs is correctly
updated when a failed call is cleaned up.

Without this rmmod may hang waiting for rxrpc_n_rx_skbs to become zero.

Fixes: 5d7edbc9231e ("rxrpc: Get rid of the Rx ring")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxbf_gige: Enable the GigE port in mlxbf_gige_open

[ Upstream commit a460f4a684511e007bbf1700758a41f05d9981e6 ]

At the moment, the GigE port is enabled in the mlxbf_gige_probe
function. If the mlxbf_gige_open is not executed, this could cause
pause frames to increase in the case where there is high backgroud
traffic. This results in clogging the port.
So move enabling the OOB port to mlxbf_gige_open.

Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxbf_gige: Fix intermittent no ip issue

[ Upstream commit ef210ef85d5cb543ce34a57803ed856d0c8c08c2 ]

Although the link is up, there is no ip assigned on setups with high background
traffic. Nothing is transmitted nor received. The RX error count keeps on
increasing. After several minutes, the RX error count stagnates and the
GigE interface finally gets an ip.

The issue is that mlxbf_gige_rx_init() is called before phy_start().
As soon as the RX DMA is enabled in mlxbf_gige_rx_init(), the RX CI reaches the max
of 128, and becomes equal to RX PI. RX CI doesn't decrease since the code hasn't
ran phy_start yet.
Bring the PHY up before starting the RX.

Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: act_ct: fix skb leak and crash on ooo frags

[ Upstream commit 3f14b377d01d8357eba032b4cabc8c1149b458b6 ]

act_ct adds skb->users before defragmentation. If frags arrive in order,
the last frag's reference is reset in:

  inet_frag_reasm_prepare
    skb_morph

which is not straightforward.

However when frags arrive out of order, nobody unref the last frag, and
all frags are leaked. The situation is even worse, as initiating packet
capture can lead to a crash[0] when skb has been cloned and shared at the
same time.

Fix the issue by removing skb_get() before defragmentation. act_ct
returns TC_ACT_CONSUMED when defrag failed or in progress.

[0]:
[  843.804823] ------------[ cut here ]------------
[  843.809659] kernel BUG at net/core/skbuff.c:2091!
[  843.814516] invalid opcode: 0000 [#1] PREEMPT SMP
[  843.819296] CPU: 7 PID: 0 Comm: swapper/7 Kdump: loaded Tainted: G S 6.7.0-rc3 #2
[  843.824107] Hardware name: XFUSION 1288H V6/BC13MBSBD, BIOS 1.29 11/25/2022
[  843.828953] RIP: 0010:pskb_expand_head+0x2ac/0x300
[  843.833805] Code: 8b 70 28 48 85 f6 74 82 48 83 c6 08 bf 01 00 00 00 e8 38 bd ff ff 8b 83 c0 00 00 00 48 03 83 c8 00 00 00 e9 62 ff ff ff 0f 0b <0f> 0b e8 8d d0 ff ff e9 b3 fd ff ff 81 7c 24 14 40 01 00 00 4c 89
[  843.843698] RSP: 0018:ffffc9000cce07c0 EFLAGS: 00010202
[  843.848524] RAX: 0000000000000002 RBX: ffff88811a211d00 RCX: 0000000000000820
[  843.853299] RDX: 0000000000000640 RSI: 0000000000000000 RDI: ffff88811a211d00
[  843.857974] RBP: ffff888127d39518 R08: 00000000bee97314 R09: 0000000000000000
[  843.862584] R10: 0000000000000000 R11: ffff8881109f0000 R12: 0000000000000880
[  843.867147] R13: ffff888127d39580 R14: 0000000000000640 R15: ffff888170f7b900
[  843.871680] FS:  0000000000000000(0000) GS:ffff889ffffc0000(0000) knlGS:0000000000000000
[  843.876242] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  843.880778] CR2: 00007fa42affcfb8 CR3: 000000011433a002 CR4: 0000000000770ef0
[  843.885336] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  843.889809] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  843.894229] PKRU: 55555554
[  843.898539] Call Trace:
[  843.902772]  <IRQ>
[  843.906922]  ? __die_body+0x1e/0x60
[  843.911032]  ? die+0x3c/0x60
[  843.915037]  ? do_trap+0xe2/0x110
[  843.918911]  ? pskb_expand_head+0x2ac/0x300
[  843.922687]  ? do_error_trap+0x65/0x80
[  843.926342]  ? pskb_expand_head+0x2ac/0x300
[  843.929905]  ? exc_invalid_op+0x50/0x60
[  843.933398]  ? pskb_expand_head+0x2ac/0x300
[  843.936835]  ? asm_exc_invalid_op+0x1a/0x20
[  843.940226]  ? pskb_expand_head+0x2ac/0x300
[  843.943580]  inet_frag_reasm_prepare+0xd1/0x240
[  843.946904]  ip_defrag+0x5d4/0x870
[  843.950132]  nf_ct_handle_fragments+0xec/0x130 [nf_conntrack]
[  843.953334]  tcf_ct_act+0x252/0xd90 [act_ct]
[  843.956473]  ? tcf_mirred_act+0x516/0x5a0 [act_mirred]
[  843.959657]  tcf_action_exec+0xa1/0x160
[  843.962823]  fl_classify+0x1db/0x1f0 [cls_flower]
[  843.966010]  ? skb_clone+0x53/0xc0
[  843.969173]  tcf_classify+0x24d/0x420
[  843.972333]  tc_run+0x8f/0xf0
[  843.975465]  __netif_receive_skb_core+0x67a/0x1080
[  843.978634]  ? dev_gro_receive+0x249/0x730
[  843.981759]  __netif_receive_skb_list_core+0x12d/0x260
[  843.984869]  netif_receive_skb_list_internal+0x1cb/0x2f0
[  843.987957]  ? mlx5e_handle_rx_cqe_mpwrq_rep+0xfa/0x1a0 [mlx5_core]
[  843.991170]  napi_complete_done+0x72/0x1a0
[  843.994305]  mlx5e_napi_poll+0x28c/0x6d0 [mlx5_core]
[  843.997501]  __napi_poll+0x25/0x1b0
[  844.000627]  net_rx_action+0x256/0x330
[  844.003705]  __do_softirq+0xb3/0x29b
[  844.006718]  irq_exit_rcu+0x9e/0xc0
[  844.009672]  common_interrupt+0x86/0xa0
[  844.012537]  </IRQ>
[  844.015285]  <TASK>
[  844.017937]  asm_common_interrupt+0x26/0x40
[  844.020591] RIP: 0010:acpi_safe_halt+0x1b/0x20
[  844.023247] Code: ff 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 65 48 8b 04 25 00 18 03 00 48 8b 00 a8 08 75 0c 66 90 0f 00 2d 81 d0 44 00 fb f4 <fa> c3 0f 1f 00 89 fa ec 48 8b 05 ee 88 ed 00 a9 00 00 00 80 75 11
[  844.028900] RSP: 0018:ffffc90000533e70 EFLAGS: 00000246
[  844.031725] RAX: 0000000000004000 RBX: 0000000000000001 RCX: 0000000000000000
[  844.034553] RDX: ffff889ffffc0000 RSI: ffffffff828b7f20 RDI: ffff88a090f45c64
[  844.037368] RBP: ffff88a0901a2800 R08: ffff88a090f45c00 R09: 00000000000317c0
[  844.040155] R10: 00ec812281150475 R11: ffff889fffff0e04 R12: ffffffff828b7fa0
[  844.042962] R13: ffffffff828b7f20 R14: 0000000000000001 R15: 0000000000000000
[  844.045819]  acpi_idle_enter+0x7b/0xc0
[  844.048621]  cpuidle_enter_state+0x7f/0x430
[  844.051451]  cpuidle_enter+0x2d/0x40
[  844.054279]  do_idle+0x1d4/0x240
[  844.057096]  cpu_startup_entry+0x2a/0x30
[  844.059934]  start_secondary+0x104/0x130
[  844.062787]  secondary_startup_64_no_verify+0x16b/0x16b
[  844.065674]  </TASK>

Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct")
Signed-off-by: Tao Liu <taoliu828@163.com>
Link: https://lore.kernel.org/r/20231228081457.936732-1-taoliu828@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-cgroup: fix rcu lockdep warning in blkg_lookup()

[ Upstream commit 393cd8ffd832f23eec3a105553eff622e8198918 ]

blkg_lookup() is called with either queue_lock or rcu read lock, so
use rcu_dereference_check(lockdep_is_held(&q->queue_lock)) for
retrieving 'blkg', which way models the check exactly for covering
queue lock or rcu read lock.

Fix lockdep warning of "block/blk-cgroup.h:254 suspicious rcu_dereference_check() usage!"
from blkg_lookup().

Tested-by: Changhui Zhong <czhong@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Fixes: 83462a6c971c ("blkcg: Drop unnecessary RCU read [un]locks from blkg_conf_prep/finish()")
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231219012833.2129540-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: fix busy polling

[ Upstream commit a562c0a2d651e040681b0bfce9b4d229ac3b0b8c ]

Busy polling while holding the socket lock makes litle sense,
because incoming packets wont reach our receive queue.

Fixes: 8465a5fcd1ce ("sctp: add support for busy polling to sctp protocol")
Reported-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: support MSG_ERRQUEUE flag in recvmsg()

[ Upstream commit 4746b36b1abe11ca32987b2d21e1e770deab17cc ]

For some reason sctp_poll() generates EPOLLERR if sk->sk_error_queue
is not empty but recvmsg() can not drain the error queue yet.

This is needed to better support timestamping.

I had to export inet_recv_error(), since sctp
can be compiled as a module.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20231212145550.3872051-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: a562c0a2d651 ("sctp: fix busy polling")
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: sockmap, fix proto update hook to avoid dup calls

[ Upstream commit 16b2f264983dc264c1560cc0170e760dec1bf54f ]

When sockets are added to a sockmap or sockhash we allocate and init a
psock. Then update the proto ops with sock_map_init_proto the flow is

  sock_hash_update_common
    sock_map_link
      psock = sock_map_psock_get_checked() <-returns existing psock
      sock_map_init_proto(sk, psock)       <- updates sk_proto

If the socket is already in a map this results in the sock_map_init_proto
being called multiple times on the same socket. We do this because when
a socket is added to multiple maps this might result in a new set of BPF
programs being attached to the socket requiring an updated ops struct.

This creates a rule where it must be safe to call psock_update_sk_prot
multiple times. When we added a fix for UAF through unix sockets in patch
4dd9a38a753fc we broke this rule by adding a sock_hold in that path
to ensure the sock is not released. The result is if a af_unix stream sock
is placed in multiple maps it results in a memory leak because we call
sock_hold multiple times with only a single sock_put on it.

Fixes: 8866730aed51 ("bpf, sockmap: af_unix stream sockets need to hold ref for pair sock")
Reported-by: Xingwei Lee <xrivendell7@gmail.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20231221232327.43678-2-john.fastabend@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: cfg80211: parse all ML elements in an ML probe response

[ Upstream commit d18125b640309e925441ce49559be33867ae6b29 ]

A probe response from a transmitting AP in an Multi-BSSID setup will
contain more than one Multi-Link element. Most likely, only one of these
elements contains per-STA profiles.

Fixes: 2481b5da9c6b ("wifi: cfg80211: handle BSS data contained in ML probe responses")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.6635eb152735.I94289002d4a2f7b6b44dfa428344854e37b0b29c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: cfg80211: correct comment about MLD ID

[ Upstream commit 2a0698f86d4dfc43cc0c1703efb7ba6b1506a4e2 ]

The comment was referencing the wrong section of the documentation and
was also subtly wrong as it assumed the rules that apply when sending
probe requests directly to a nontransmitted AP. However, in that case
the response comes from the transmitting AP and the AP MLD ID will be
included.

Fixes: 2481b5da9c6b ("wifi: cfg80211: handle BSS data contained in ML probe responses")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240102213313.0917ab4b5d7f.I76aff0e261a5de44ffb467e591a46597a30d7c0a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: Fix led pinctrl of lubancat 1

[ Upstream commit 8586a5d217ef7bfeee24943c600a8a7890d6f477 ]

According to the schematics, the gpio control sys_led is GPIO0_C5.

Fixes: 8d94da58de53 ("arm64: dts: rockchip: Add EmbedFire LubanCat 1")
Reported-by: Zhang Ning <zhangn1985@outlook.com>
Closes: https://lore.kernel.org/linux-rockchip/OS0P286MB06412D049D8BF7B063D41350CD95A@OS0P286MB0641.JPNP286.PROD.OUTLOOK.COM/T/#u
Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20231225005055.3102743-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

null_blk: don't cap max_hw_sectors to BLK_DEF_MAX_SECTORS

[ Upstream commit 9a9525de865410047fa962867b4fcd33943b206f ]

null_blk has some rather odd capping of the max_hw_sectors value to
BLK_DEF_MAX_SECTORS, which doesn't make sense - max_hw_sector is the
hardware limit, and BLK_DEF_MAX_SECTORS despite the confusing name is the
default cap for the max_sectors field used for normal file system I/O.

Remove all the capping, and simply leave it to the block layer or
user to take up or not all of that for file system I/O.

Fixes: ea17fd354ca8 ("null_blk: Allow controlling max_hw_sectors limit")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231227092305.279567-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btmtkuart: fix recv_buf() return value

[ Upstream commit 64057f051f20c2a2184b9db7f8037d928d68a4f4 ]

Serdev recv_buf() callback is supposed to return the amount of bytes
consumed, therefore an int in between 0 and count.

Do not return negative number in case of issue, just print an error and
return count. This fixes a WARN in ttyport_receive_buf().

Link: https://lore.kernel.org/all/087be419-ec6b-47ad-851a-5e1e3ea5cfcc@kernel.org/
Fixes: 7237c4c9ec92 ("Bluetooth: mediatek: Add protocol support for MediaTek serial devices")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btnxpuart: fix recv_buf() return value

[ Upstream commit 94d05394254401e503867c16aff561d3e687dfdc ]

Serdev recv_buf() callback is supposed to return the amount of bytes
consumed, therefore an int in between 0 and count.

Do not return a negative number in case of issue, just print an error
and return count. Before this change, in case of error, the returned
negative number was internally converted to 0 in ttyport_receive_buf,
now when the receive buffer is corrupted we return the size of the whole
received data (`count`). This should allow for better recovery in case
receiver/transmitter get out of sync if some data is lost.

This fixes a WARN in ttyport_receive_buf().

  Bluetooth: hci0: Frame reassembly failed (-84)
  ------------[ cut here ]------------
  serial serial0: receive_buf returns -84 (count = 6)
  WARNING: CPU: 0 PID: 37 at drivers/tty/serdev/serdev-ttyport.c:37 ttyport_receive_buf+0xd8/0xf8
  Modules linked in: mwifiex_sdio(+) ...
  CPU: 0 PID: 37 Comm: kworker/u4:2 Not tainted 6.7.0-rc2-00147-gf1a09972a45a #1
  Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT)
  Workqueue: events_unbound flush_to_ldisc
  pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  pc : ttyport_receive_buf+0xd8/0xf8
  lr : ttyport_receive_buf+0xd8/0xf8
...
  Call trace:
   ttyport_receive_buf+0xd8/0xf8
   flush_to_ldisc+0xbc/0x1a4
   process_scheduled_works+0x16c/0x28c

Closes: https://lore.kernel.org/all/ZWEIhcUXfutb5SY6@francesco-nb.int.toradex.com/
Fixes: 689ca16e5232 ("Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Fix bogus check for re-auth no supported with non-ssp

[ Upstream commit d03376c185926098cb4d668d6458801eb785c0a5 ]

This reverts 19f8def031bfa50c579149b200bfeeb919727b27
"Bluetooth: Fix auth_complete_evt for legacy units" which seems to be
working around a bug on a broken controller rather then any limitation
imposed by the Bluetooth spec, in fact if there ws not possible to
re-auth the command shall fail not succeed.

Fixes: 19f8def031bf ("Bluetooth: Fix auth_complete_evt for legacy units")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: validate chain type update if available

[ Upstream commit aaba7ddc8507f4ad5bbd07988573967632bc2385 ]

Parse netlink attribute containing the chain type in this update, to
bail out if this is different from the existing type.

Otherwise, it is possible to define a chain with the same name, hook and
priority but different type, which is silently ignored.

Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: mark newset as dead on transaction abort

[ Upstream commit 08e4c8c5919fd405a4d709b4ba43d836894a26eb ]

If a transaction is aborted, we should mark the to-be-released NEWSET dead,
just like commit path does for DEL and DESTROYSET commands.

In both cases all remaining elements will be released via
set->ops->destroy().

The existing abort code does NOT post the actual release to the work queue.
Also the entire __nf_tables_abort() function is wrapped in gc_seq
begin/end pair.

Therefore, async gc worker will never try to release the pending set
elements, as gc sequence is always stale.

It might be possible to speed up transaction aborts via work queue too,
this would result in a race and a possible use-after-free.

So fix this before it becomes an issue.

Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: assign phy_ctxt before eSR activation

[ Upstream commit 9b6614e5ead5d19a71893bcca3f1a6569ca0c456 ]

eSR is activated when a chanctx is assigned to more than one link.
During eSR activation we should disable RLC for both phys, and configure
the FW with a special phy command for both phys.
Currently we assign the phy_ctxt to the link only after eSR activation,
so RLC is not disabled for the new phy_ctxt, and a cmd is not sent to FW.
Fix this by first assigning the new phy_ctxt to the link and then
doing the eSR activation.

Fixes: 12bacfc2c065 ("wifi: iwlwifi: handle eSR transitions")
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.3d94507f5d9a.I537fcd73aedf94c7348c03157e486f24301fef14@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: fix out of bound copy_from_user

[ Upstream commit cb2dfacb197bed0241fbb4f84bd0995a47f4465e ]

The driver copies the userspace buffer into an internal NUL
byte terminated buffer. While doing so, it was reading beyond
the end of the userspace buffer, overwriting its own NUL
termination in the process.

Fix this by only copying the correct number of bytes.

Fixes: 3f244876ef73 ("wifi: iwlwifi: make debugfs entries link specific")
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.e4913deb2ad4.Idcf6a7e909ff4b7801cd49c2f691f84a2f68eff9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: send TX path flush in rfkill

[ Upstream commit 2afc3dad39ea84a072d04ff40a417234326adc47 ]

If we want to drop packets, that's surely a good thing to
do when we want to enter rfkill. Send this command despite
rfkill so we can successfully clean up everything, we need
to handle it separately since it has CMD_WANT_SKB, so it's
not going to automatically return success when in rfkill.

Fixes: d4e3a341b87b ("iwlwifi: mvm: add support for new flush queue response")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.c528a6fa6cec.Ibe5e9560359ccc0fba60c35e01de285c376748a2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: mvm: set siso/mimo chains to 1 in FW SMPS request

[ Upstream commit b1a2e5c310e063560760806d2cc5d2233c596067 ]

The firmware changed their mind, don't set the chains to zero,
instead set them to 1 as we normally would for connections to
APs that don't use MIMO.

Fixes: 2a7ce54ccc23 ("iwlwifi: mvm: honour firmware SMPS requests")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231219215605.7f031f1a127f.Idc816e0f604b07d22a9d5352bc23c445512fad14@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtlwifi: rtl8192se: using calculate_bit_shift()

[ Upstream commit ac32b9317063b101a8ff3d3e885f76f87a280419 ]

Using calculate_bit_shift() to replace _rtl92s_phy_calculate_bit_shift().
And fix the undefined bitwise shift behavior problem.

Fixes: d15853163bea ("rtlwifi: rtl8192se: Merge phy routines")
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231219065739.1895666-10-suhui@nfschina.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtlwifi: rtl8192ee: using calculate_bit_shift()

[ Upstream commit 63526897fc0d086069bcab67c3a112caaec751cb ]

Using calculate_bit_shift() to replace _rtl92ee_phy_calculate_bit_shift().
And fix the undefined bitwise shift behavior problem.

Fixes: b1a3bfc97cd9 ("rtlwifi: rtl8192ee: Move driver from staging to the regular tree")
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231219065739.1895666-9-suhui@nfschina.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtlwifi: rtl8192de: using calculate_bit_shift()

[ Upstream commit b8b2baad2e652042cf8b6339939ac2f4e6f53de4 ]

Using calculate_bit_shift() to replace _rtl92d_phy_calculate_bit_shift().
And fix the undefined bitwise shift behavior problem.

Fixes: 7274a8c22980 ("rtlwifi: rtl8192de: Merge phy routines")
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231219065739.1895666-8-suhui@nfschina.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtlwifi: rtl8192ce: using calculate_bit_shift()

[ Upstream commit 3d03e8231031bcc65a48cd88ef9c71b6524ce70b ]

Using calculate_bit_shift() to replace _rtl92c_phy_calculate_bit_shift().
And fix the undefined bitwise shift behavior problem.

Fixes: 0c8173385e54 ("rtl8192ce: Add new driver")
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231219065739.1895666-7-suhui@nfschina.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtlwifi: rtl8192cu: using calculate_bit_shift()

[ Upstream commit f4088c8fcbabadad9dd17d17ae9ba24e9e3221ec ]

Using calculate_bit_shift() to replace _rtl92c_phy_calculate_bit_shift().
And fix an undefined bitwise shift behavior problem.

Fixes: f0a39ae738d6 ("rtlwifi: rtl8192cu: Add routine phy")
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231219065739.1895666-6-suhui@nfschina.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtlwifi: rtl8192c: using calculate_bit_shift()

[ Upstream commit 1dedc3a6699d827d345019e921b8d8f37f694333 ]

Using calculate_bit_shift() to replace _rtl92c_phy_calculate_bit_shift().
And fix the undefined bitwise shift behavior problem.

Fixes: 4295cd254af3 ("rtlwifi: Move common parts of rtl8192ce/phy.c")
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231219065739.1895666-5-suhui@nfschina.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtlwifi: rtl8188ee: phy: using calculate_bit_shift()

[ Upstream commit 969bc926f04b438676768aeffffffb050e480b62 ]

Using calculate_bit_shift() to replace _rtl88e_phy_calculate_bit_shift().
And fix the undefined bitwise shift behavior problem.

Fixes: f0eb856e0b6c ("rtlwifi: rtl8188ee: Add new driver")
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231219065739.1895666-4-suhui@nfschina.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtlwifi: add calculate_bit_shift()

[ Upstream commit 52221dfddbbfb5b4e029bb2efe9bb7da33ec1e46 ]

There are many same functions like _rtl88e_phy_calculate_bit_shift(),
_rtl92c_phy_calculate_bit_shift() and so on. And these functions can
cause undefined bitwise shift behavior. Add calculate_bit_shift() to
replace them and fix undefined behavior in subsequent patches.

Signed-off-by: Su Hui <suhui@nfschina.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231219065739.1895666-2-suhui@nfschina.com
Stable-dep-of: 969bc926f04b ("wifi: rtlwifi: rtl8188ee: phy: using calculate_bit_shift()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Use c->unit_size to select target cache during free

[ Upstream commit 7ac5c53e00735d183a0f5e2cfce5eeb6c16319f2 ]

At present, bpf memory allocator uses check_obj_size() to ensure that
ksize() of allocated pointer is equal with the unit_size of used
bpf_mem_cache. Its purpose is to prevent bpf_mem_free() from selecting
a bpf_mem_cache which has different unit_size compared with the
bpf_mem_cache used for allocation. But as reported by lkp, the return
value of ksize() or kmalloc_size_roundup() may change due to slab merge
and it will lead to the warning report in check_obj_size().

The reported warning happened as follows:
(1) in bpf_mem_cache_adjust_size(), kmalloc_size_roundup(96) returns the
object_size of kmalloc-96 instead of kmalloc-cg-96. The object_size of
kmalloc-96 is 96, so size_index for 96 is not adjusted accordingly.
(2) the object_size of kmalloc-cg-96 is adjust from 96 to 128 due to
slab merge in __kmem_cache_alias(). For SLAB, SLAB_HWCACHE_ALIGN is
enabled by default for kmalloc slab, so align is 64 and size is 128 for
kmalloc-cg-96. SLUB has a similar merge logic, but its object_size will
not be changed, because its align is 8 under x86-64.
(3) when unit_alloc() does kmalloc_node(96, __GFP_ACCOUNT, node),
ksize() returns 128 instead of 96 for the returned pointer.
(4) the warning in check_obj_size() is triggered.

Considering the slab merge can happen in anytime (e.g, a slab created in
a new module), the following case is also possible: during the
initialization of bpf_global_ma, there is no slab merge and ksize() for
a 96-bytes object returns 96. But after that a new slab created by a
kernel module is merged to kmalloc-cg-96 and the object_size of
kmalloc-cg-96 is adjust from 96 to 128 (which is possible for x86-64 +
CONFIG_SLAB, because its alignment requirement is 64 for 96-bytes slab).
So soon or later, when bpf_global_ma frees a 96-byte-sized pointer
which is allocated from bpf_mem_cache with unit_size=96, bpf_mem_free()
will free the pointer through a bpf_mem_cache in which unit_size is 128,
because the return value of ksize() changes. The warning for the
mismatch will be triggered again.

A feasible fix is introducing similar APIs compared with ksize() and
kmalloc_size_roundup() to return the actually-allocated size instead of
size which may change due to slab merge, but it will introduce
unnecessary dependency on the implementation details of mm subsystem.

As for now the pointer of bpf_mem_cache is saved in the 8-bytes area
(or 4-bytes under 32-bit host) above the returned pointer, using
unit_size in the saved bpf_mem_cache to select the target cache instead
of inferring the size from the pointer itself. Beside no extra
dependency on mm subsystem, the performance for bpf_mem_free_rcu() is
also improved as shown below.

Before applying the patch, the performances of bpf_mem_alloc() and
bpf_mem_free_rcu() on 8-CPUs VM with one producer are as follows:

kmalloc : alloc 11.69 ± 0.28M/s free 29.58 ± 0.93M/s
percpu  : alloc 14.11 ± 0.52M/s free 14.29 ± 0.99M/s

After apply the patch, the performance for bpf_mem_free_rcu() increases
9% and 146% for kmalloc memory and per-cpu memory respectively:

kmalloc: alloc 11.01 ± 0.03M/s free   32.42 ± 0.48M/s
percpu:  alloc 12.84 ± 0.12M/s free   35.24 ± 0.23M/s

After the fixes, there is no need to adjust size_index to fix the
mismatch between allocation and free, so remove it as well. Also return
NULL instead of ZERO_SIZE_PTR for zero-sized alloc in bpf_mem_alloc(),
because there is no bpf_mem_cache pointer saved above ZERO_SIZE_PTR.

Fixes: 9077fc228f09 ("bpf: Use kmalloc_size_roundup() to adjust size_index")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/bpf/202310302113.9f8fe705-oliver.sang@intel.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231216131052.27621-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Use pcpu_alloc_size() in bpf_mem_free{_rcu}()

[ Upstream commit 3f2189e4f77b7a3e979d143dc4ff586488c7e8a5 ]

For bpf_global_percpu_ma, the pointer passed to bpf_mem_free_rcu() is
allocated by kmalloc() and its size is fixed (16-bytes on x86-64). So
no matter which cache allocates the dynamic per-cpu area, on x86-64
cache[2] will always be used to free the per-cpu area.

Fix the unbalance by checking whether the bpf memory allocator is
per-cpu or not and use pcpu_alloc_size() instead of ksize() to
find the correct cache for per-cpu free.

Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231020133202.4043247-5-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 7ac5c53e0073 ("bpf: Use c->unit_size to select target cache during free")
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Re-enable unit_size checking for global per-cpu allocator

[ Upstream commit baa8fdecd87bb8751237b45e3bcb5a179e5a12ca ]

With pcpu_alloc_size() in place, check whether or not the size of
the dynamic per-cpu area is matched with unit_size.

Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231020133202.4043247-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 7ac5c53e0073 ("bpf: Use c->unit_size to select target cache during free")
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc8180x: Fix up PCIe nodes

[ Upstream commit 78403b37f6770441f80a78d13772394731afe055 ]

Duplicated clock output names cause probe errors and wrong clocks cause
hardware not to work. Fix such issues.

Fixes: d20b6c84f56a ("arm64: dts: qcom: sc8180x: Add PCIe instances")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231219-topic-8180_pcie-v1-1-c2acbba4723c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc8180x: switch PCIe QMP PHY to new style of bindings

[ Upstream commit a6546460ca439bade19d64eb63cee2d97c29fb72 ]

Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes). While we are at it, rename PHY
nodes to `phy@`.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230820142035.89903-13-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 78403b37f677 ("arm64: dts: qcom: sc8180x: Fix up PCIe nodes")
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc8180x: Mark PCIe hosts cache-coherent

[ Upstream commit 45e8c72712345263208f7c94f334fa718634f557 ]

The PCIe controllers on 8180 are cache-coherent. Mark them as such.

Fixes: d20b6c84f56a ("arm64: dts: qcom: sc8180x: Add PCIe instances")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231219-topic-8180_pcie_dmac-v1-1-5d00fc1b23fd@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8550: Update idle state time requirements

[ Upstream commit ad6556fb45d4ab91ad786a2025cbe2b0f2e6cf77 ]

The idle state entry/exit/residency times differ from what shipped on
production devices, mostly being overly optimistic in entry times and
overly pessimistic in minimal residency times. Align them with
downstream sources.

Fixes: ffc50b2d3828 ("arm64: dts: qcom: Add base SM8550 dtsi")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-12-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8550: Separate out X3 idle state

[ Upstream commit 28b735232d5e16a34f98dbac1e7b5401c1c16d89 ]

The X3 core has different entry/exit/residency time requirements than
the big cluster. Denote them to stop confusing the scheduler.

Fixes: ffc50b2d3828 ("arm64: dts: qcom: Add base SM8550 dtsi")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-8550_fixes-v1-11-ce1272d77540@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: ipq6018: fix clock rates for GCC_USB0_MOCK_UTMI_CLK

[ Upstream commit 5c0dbe8b058436ad5daecb19c60869f832607ea3 ]

The downstream QSDK kernel [1] and GCC_USB1_MOCK_UTMI_CLK are both 24MHz.
Adjust GCC_USB0_MOCK_UTMI_CLK to 24MHz to avoid the following error:

clk: couldn't set gcc_usb0_mock_utmi_clk clk rate to 20000000 (-22), current rate: 24000000

1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/commit/486c8485f59

Fixes: 5726079cd486 ("arm64: dts: ipq6018: Use reference clock to set dwc3 period")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20231218150805.1228160-1-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc7280: Mark SDHCI hosts as cache-coherent

[ Upstream commit 827f5fc8d912203c1f971e47d61130b13c6820ba ]

The SDHCI hosts on SC7280 are cache-coherent, just like on most fairly
recent Qualcomm SoCs. Mark them as such.

Fixes: 298c81a7d44f ("arm64: dts: qcom: sc7280: Add nodes for eMMC and SD card")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-7280_dmac_sdhci-v1-1-97af7efd64a1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: add check of 'minors' and 'first_minor' in device_add_disk()

[ Upstream commit 4c434392c4777881d01beada6701eff8c76b43fe ]

'first_minor' represents the starting minor number of disks, and
'minors' represents the number of partitions in the device. Neither
of them can be greater than MINORMASK + 1.

Commit e338924bd05d ("block: check minor range in device_add_disk()")
only added the check of 'first_minor + minors'. However, their sum might
be less than MINORMASK but their values are wrong. Complete the checks now.

Fixes: e338924bd05d ("block: check minor range in device_add_disk()")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231219075942.840255-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset

[ Upstream commit 110cb8d861cc1a040cdab495b22ac436c49d1454 ]

According to documentation, it has increments of 4, not 8.

Fixes: c72ca343f911 ("soc: qcom: llcc: Add v4.1 HW version support")
Reported-by: Unnathi Chalicheemala <quic_uchalich@quicinc.com>
Reviewed-by: Satya Durga Srinivasu Prabhala <quic_satyap@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20231012160509.184891-1-abel.vesa@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8150-hdk: fix SS USB regulators

[ Upstream commit a509adf05b2aac31b22781f5aa09e4768a5b6c39 ]

The SM8150-HDK uses two different regulators to power up SuperSpeed USB
PHYs. The L5A regulator is used for the second USB host, while the first
(OTG) USB host uses different regulator, L18A. Fix the regulator for the
usb_1 QMPPHY and (to remove possible confusion) drop the
usb_ss_dp_core_1/_2 labels.

Fixes: 0ab1b2d10afe ("arm64: dts: qcom: add sm8150 hdk dts")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231215174152.315403-4-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8150: make dispcc cast minimal vote on MMCX

[ Upstream commit 617de4ce7b1c4b41c1316e493d4717cd2f208def ]

Add required-opps property to the display clock controller. This makes
it cast minimal vote on the MMCX lane and prevents further 'clock stuck'
errors when enabling the display.

Fixes: 2ef3bb17c45c ("arm64: dts: qcom: sm8150: Add DISPCC node")
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231215174152.315403-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm6375: Hook up MPM

[ Upstream commit d3246a0cf43fd24a1986163284edd2389143809d ]

Add a node for MPM and wire it up on consumers that use it. This also
fixes a very bad and sad assumption I made when initially porting this
SoC that the downstream MPM-TLMM mappings were 1-1. That apparently
changed some time ago, so with this patch the MPM consumers will actually
be hooked up to the correct interrupt lines.

Fixes: 59d34ca97f91 ("arm64: dts: qcom: Add initial device tree for SM6375")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231215-topic-mpm_dt-v1-1-c6636fc75ce3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm6375: fix USB wakeup interrupt types

[ Upstream commit 41952be6661b20f56c2c5b06c431880dd975b747 ]

The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: 59d34ca97f91 ("arm64: dts: qcom: Add initial device tree for SM6375")
Cc: stable@vger.kernel.org # 6.2
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-10-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: d3246a0cf43f ("arm64: dts: qcom: sm6375: Hook up MPM")
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: llcc: Fix dis_cap_alloc and retain_on_pc configuration

[ Upstream commit eed6e57e9f3e2beac37563eb6a0129549daa330e ]

Commit c14e64b46944 ("soc: qcom: llcc: Support chipsets that can
 write to llcc") add the support for chipset where capacity based
allocation and retention through power collapse can be programmed
based on content of SCT table mentioned in the llcc driver where
the target like sdm845 where the entire programming related to it
is controlled in firmware. However, the commit introduces a bug
where capacity/retention register get overwritten each time it
gets programmed for each slice and that results in misconfiguration
of the register based on SCT table and that is not expected
behaviour instead it should be read modify write to retain the
configuration of other slices.

This issue is totally caught from code review and programming test
and not through any power/perf numbers so, it is not known what
impact this could make if we don't have this change however,
this feature are for these targets and they should have been
programmed accordingly as per their configuration mentioned in
SCT table like others bits information.

This change brings one difference where it keeps capacity/retention
bits of the slices that are not mentioned in SCT table in unknown
state where as earlier it was initialized to zero.

Fixes: c14e64b46944 ("soc: qcom: llcc: Support chipsets that can write to llcc")
Signed-off-by: Atul Dhudase <quic_adhudase@quicinc.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/1701876771-10695-1-git-send-email-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: acer-aspire1: Correct audio codec definition

[ Upstream commit feec9f0add432a867f23e29afcd2f7088889b8e2 ]

When initially added, a mistake was made in the definition of the codec.

Despite the fact that the DMIC line is connected on the side of the
codec chip, and relevant passive components, including 0-ohm resistors
connecting the dmics, are present, the dmic line is still cut in
another place on the board, which was overlooked.

Correct this by replacing the dmic configuration with a comment
describing this hardware detail.

While at it, also add missing regulators definitions. This is not a
functional change as all the relevant regulators were already added via
the other rail supplies.

Fixes: 4a9f8f8f2ada ("arm64: dts: qcom: Add Acer Aspire 1")
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20231205-aspire1-sound-v2-2-443b7ac0a06f@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Limit the number of kprobes when attaching program to multiple kprobes

[ Upstream commit d6d1e6c17cab2dcb7b8530c599f00e7de906d380 ]

An abnormally big cnt may also be assigned to kprobe_multi.cnt when
attaching multiple kprobes. It will trigger the following warning in
kvmalloc_node():

if (unlikely(size > INT_MAX)) {
    WARN_ON_ONCE(!(flags & __GFP_NOWARN));
    return NULL;
}

Fix the warning by limiting the maximal number of kprobes in
bpf_kprobe_multi_link_attach(). If the number of kprobes is greater than
MAX_KPROBE_MULTI_CNT, the attachment will fail and return -E2BIG.

Fixes: 0dcac2725406 ("bpf: Add multi kprobe link")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231215100708.2265609-3-houtao@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Limit the number of uprobes when attaching program to multiple uprobes

[ Upstream commit 8b2efe51ba85ca83460941672afac6fca4199df6 ]

An abnormally big cnt may be passed to link_create.uprobe_multi.cnt,
and it will trigger the following warning in kvmalloc_node():

if (unlikely(size > INT_MAX)) {
WARN_ON_ONCE(!(flags & __GFP_NOWARN));
return NULL;
}

Fix the warning by limiting the maximal number of uprobes in
bpf_uprobe_multi_link_attach(). If the number of uprobes is greater than
MAX_UPROBE_MULTI_CNT, the attachment will return -E2BIG.

Fixes: 89ae89f53d20 ("bpf: Add multi uprobe link")
Reported-by: Xingwei Lee <xrivendell7@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Closes: https://lore.kernel.org/bpf/CABOYnLwwJY=yFAGie59LFsUsBAgHfroVqbzZ5edAXbFE3YiNVA@mail.gmail.com
Link: https://lore.kernel.org/bpf/20231215100708.2265609-2-houtao@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-mapping: clear dev->dma_mem to NULL after freeing it

[ Upstream commit b07bc2347672cc8c7293c64499f1488278c5ca3d ]

Reproduced with below sequence:
dma_declare_coherent_memory()->dma_release_coherent_memory()
->dma_declare_coherent_memory()->"return -EBUSY" error

It will return -EBUSY from the dma_assign_coherent_memory()
in dma_declare_coherent_memory(), the reason is that dev->dma_mem
pointer has not been set to NULL after it's freed.

Fixes: cf65a0f6f6ff ("dma-mapping: move all DMA mapping code to kernel/dma")
Signed-off-by: Joakim Zhang <joakim.zhang@cixtech.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio/vsock: send credit update during setting SO_RCVLOWAT

[ Upstream commit 0fe1798968115488c0c02f4633032a015b1faf97 ]

Send credit update message when SO_RCVLOWAT is updated and it is bigger
than number of bytes in rx queue. It is needed, because 'poll()' will
wait until number of bytes in rx queue will be not smaller than
O_RCVLOWAT, so kick sender to send more data. Otherwise mutual hungup
for tx/rx is possible: sender waits for free space and receiver is
waiting data in 'poll()'.

Rename 'set_rcvlowat' callback to 'notify_set_rcvlowat' and set
'sk->sk_rcvlowat' only in one place (i.e. 'vsock_set_rcvlowat'), so the
transport doesn't need to do it.

Fixes: b89d882dc9fc ("vsock/virtio: reduce credit update messages")
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio/vsock: fix logic which reduces credit update messages

[ Upstream commit 93b80887668226180ea5f5349cc728ca6dc700ab ]

Add one more condition for sending credit update during dequeue from
stream socket: when number of bytes in the rx queue is smaller than
SO_RCVLOWAT value of the socket. This is actual for non-default value
of SO_RCVLOWAT (e.g. not 1) - idea is to "kick" peer to continue data
transmission, because we need at least SO_RCVLOWAT bytes in our rx
queue to wake up user for reading data (in corner case it is also
possible to stuck both tx and rx sides, this is why 'Fixes' is used).

Fixes: b89d882dc9fc ("vsock/virtio: reduce credit update messages")
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmr: support IP_PKTINFO on cache report IGMP msg

[ Upstream commit bb7403655b3c3eb245d0ee330047cd3e20b3c4af ]

In order to support IP_PKTINFO on those packets, we need to call
ipv4_pktinfo_prepare.

When sending mrouted/pimd daemons a cache report IGMP msg, it is
unnecessary to set dst on the newly created skb.
It used to be necessary on older versions until
commit d826eb14ecef ("ipv4: PKTINFO doesnt need dst reference") which
changed the way IP_PKTINFO struct is been retrieved.

Changes from v1:
1. Undo changes in ipv4_pktinfo_prepare function. use it directly
   and copy the control block.

Fixes: d826eb14ecef ("ipv4: PKTINFO doesnt need dst reference")
Signed-off-by: Leone Fernando <leone4fernando@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/net: fix grep checking for fib_nexthop_multiprefix

[ Upstream commit a33e9da3470499e9ff476138f271fb52d6bfe767 ]

When running fib_nexthop_multiprefix test I saw all IPv6 test failed.
e.g.

 ]# ./fib_nexthop_multiprefix.sh
 TEST: IPv4: host 0 to host 1, mtu 1300                              [ OK ]
 TEST: IPv6: host 0 to host 1, mtu 1300                              [FAIL]

 With -v it shows

 COMMAND: ip netns exec h0 /usr/sbin/ping6 -s 1350 -c5 -w5 2001:db8:101::1
 PING 2001:db8:101::1(2001:db8:101::1) 1350 data bytes
 From 2001:db8:100::64 icmp_seq=1 Packet too big: mtu=1300

 --- 2001:db8:101::1 ping statistics ---
 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms

 Route get
 2001:db8:101::1 via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 metric 1024 expires 599sec mtu 1300 pref medium
 Searching for:
     2001:db8:101::1 from :: via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 .* mtu 1300

The reason is when CONFIG_IPV6_SUBTREES is not enabled, rt6_fill_node() will
not put RTA_SRC info. After fix:

]# ./fib_nexthop_multiprefix.sh
TEST: IPv4: host 0 to host 1, mtu 1300                              [ OK ]
TEST: IPv6: host 0 to host 1, mtu 1300                              [ OK ]

Fixes: 735ab2f65dce ("selftests: Add test with multiple prefixes using single nexthop")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231213060856.4030084-7-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix a race condition between btf_put() and map_free()

[ Upstream commit 59e5791f59dd83e8aa72a4e74217eabb6e8cfd90 ]

When running `./test_progs -j` in my local vm with latest kernel,
I once hit a kasan error like below:

  [ 1887.184724] BUG: KASAN: slab-use-after-free in bpf_rb_root_free+0x1f8/0x2b0
  [ 1887.185599] Read of size 4 at addr ffff888106806910 by task kworker/u12:2/2830
  [ 1887.186498]
  [ 1887.186712] CPU: 3 PID: 2830 Comm: kworker/u12:2 Tainted: G           OEL     6.7.0-rc3-00699-g90679706d486-dirty #494
  [ 1887.188034] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
  [ 1887.189618] Workqueue: events_unbound bpf_map_free_deferred
  [ 1887.190341] Call Trace:
  [ 1887.190666]  <TASK>
  [ 1887.190949]  dump_stack_lvl+0xac/0xe0
  [ 1887.191423]  ? nf_tcp_handle_invalid+0x1b0/0x1b0
  [ 1887.192019]  ? panic+0x3c0/0x3c0
  [ 1887.192449]  print_report+0x14f/0x720
  [ 1887.192930]  ? preempt_count_sub+0x1c/0xd0
  [ 1887.193459]  ? __virt_addr_valid+0xac/0x120
  [ 1887.194004]  ? bpf_rb_root_free+0x1f8/0x2b0
  [ 1887.194572]  kasan_report+0xc3/0x100
  [ 1887.195085]  ? bpf_rb_root_free+0x1f8/0x2b0
  [ 1887.195668]  bpf_rb_root_free+0x1f8/0x2b0
  [ 1887.196183]  ? __bpf_obj_drop_impl+0xb0/0xb0
  [ 1887.196736]  ? preempt_count_sub+0x1c/0xd0
  [ 1887.197270]  ? preempt_count_sub+0x1c/0xd0
  [ 1887.197802]  ? _raw_spin_unlock+0x1f/0x40
  [ 1887.198319]  bpf_obj_free_fields+0x1d4/0x260
  [ 1887.198883]  array_map_free+0x1a3/0x260
  [ 1887.199380]  bpf_map_free_deferred+0x7b/0xe0
  [ 1887.199943]  process_scheduled_works+0x3a2/0x6c0
  [ 1887.200549]  worker_thread+0x633/0x890
  [ 1887.201047]  ? __kthread_parkme+0xd7/0xf0
  [ 1887.201574]  ? kthread+0x102/0x1d0
  [ 1887.202020]  kthread+0x1ab/0x1d0
  [ 1887.202447]  ? pr_cont_work+0x270/0x270
  [ 1887.202954]  ? kthread_blkcg+0x50/0x50
  [ 1887.203444]  ret_from_fork+0x34/0x50
  [ 1887.203914]  ? kthread_blkcg+0x50/0x50
  [ 1887.204397]  ret_from_fork_asm+0x11/0x20
  [ 1887.204913]  </TASK>
  [ 1887.204913]  </TASK>
  [ 1887.205209]
  [ 1887.205416] Allocated by task 2197:
  [ 1887.205881]  kasan_set_track+0x3f/0x60
  [ 1887.206366]  __kasan_kmalloc+0x6e/0x80
  [ 1887.206856]  __kmalloc+0xac/0x1a0
  [ 1887.207293]  btf_parse_fields+0xa15/0x1480
  [ 1887.207836]  btf_parse_struct_metas+0x566/0x670
  [ 1887.208387]  btf_new_fd+0x294/0x4d0
  [ 1887.208851]  __sys_bpf+0x4ba/0x600
  [ 1887.209292]  __x64_sys_bpf+0x41/0x50
  [ 1887.209762]  do_syscall_64+0x4c/0xf0
  [ 1887.210222]  entry_SYSCALL_64_after_hwframe+0x63/0x6b
  [ 1887.210868]
  [ 1887.211074] Freed by task 36:
  [ 1887.211460]  kasan_set_track+0x3f/0x60
  [ 1887.211951]  kasan_save_free_info+0x28/0x40
  [ 1887.212485]  ____kasan_slab_free+0x101/0x180
  [ 1887.213027]  __kmem_cache_free+0xe4/0x210
  [ 1887.213514]  btf_free+0x5b/0x130
  [ 1887.213918]  rcu_core+0x638/0xcc0
  [ 1887.214347]  __do_softirq+0x114/0x37e

The error happens at bpf_rb_root_free+0x1f8/0x2b0:

  00000000000034c0 <bpf_rb_root_free>:
  ; {
    34c0: f3 0f 1e fa                   endbr64
    34c4: e8 00 00 00 00                callq   0x34c9 <bpf_rb_root_free+0x9>
    34c9: 55                            pushq   %rbp
    34ca: 48 89 e5                      movq    %rsp, %rbp
  ...
  ;       if (rec && rec->refcount_off >= 0 &&
    36aa: 4d 85 ed                      testq   %r13, %r13
    36ad: 74 a9                         je      0x3658 <bpf_rb_root_free+0x198>
    36af: 49 8d 7d 10                   leaq    0x10(%r13), %rdi
    36b3: e8 00 00 00 00                callq   0x36b8 <bpf_rb_root_free+0x1f8>
                                        <==== kasan function
    36b8: 45 8b 7d 10                   movl    0x10(%r13), %r15d
                                        <==== use-after-free load
    36bc: 45 85 ff                      testl   %r15d, %r15d
    36bf: 78 8c                         js      0x364d <bpf_rb_root_free+0x18d>

So the problem is at rec->refcount_off in the above.

I did some source code analysis and find the reason.
                                  CPU A                        CPU B
  bpf_map_put:
    ...
    btf_put with rcu callback
    ...
    bpf_map_free_deferred
      with system_unbound_wq
    ...                          ...                           ...
    ...                          btf_free_rcu:                 ...
    ...                          ...                           bpf_map_free_deferred:
    ...                          ...
    ...         --------->       btf_struct_metas_free()
    ...         | race condition ...
    ...         --------->                                     map->ops->map_free()
    ...
    ...                          btf->struct_meta_tab = NULL

In the above, map_free() corresponds to array_map_free() and eventually
calling bpf_rb_root_free() which calls:
  ...
  __bpf_obj_drop_impl(obj, field->graph_root.value_rec, false);
  ...

Here, 'value_rec' is assigned in btf_check_and_fixup_fields() with following code:

  meta = btf_find_struct_meta(btf, btf_id);
  if (!meta)
    return -EFAULT;
  rec->fields[i].graph_root.value_rec = meta->record;

So basically, 'value_rec' is a pointer to the record in struct_metas_tab.
And it is possible that that particular record has been freed by
btf_struct_metas_free() and hence we have a kasan error here.

Actually it is very hard to reproduce the failure with current bpf/bpf-next
code, I only got the above error once. To increase reproducibility, I added
a delay in bpf_map_free_deferred() to delay map->ops->map_free(), which
significantly increased reproducibility.

#  diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
#  index 5e43ddd1b83f..aae5b5213e93 100644
#  --- a/kernel/bpf/syscall.c
#  +++ b/kernel/bpf/syscall.c
# @@ -695,6 +695,7 @@ static void bpf_map_free_deferred(struct work_struct *work)
#        struct bpf_map *map = container_of(work, struct bpf_map, work);
#        struct btf_record *rec = map->record;
#
#  +     mdelay(100);
#        security_bpf_map_free(map);
#        bpf_map_release_memcg(map);
#        /* implementation dependent freeing */

Hao also provided test cases ([1]) for easily reproducing the above issue.

There are two ways to fix the issue, the v1 of the patch ([2]) moving
btf_put() after map_free callback, and the v5 of the patch ([3]) using
a kptr style fix which tries to get a btf reference during
map_check_btf(). Each approach has its pro and cons. The first approach
delays freeing btf while the second approach needs to acquire reference
depending on context which makes logic not very elegant and may
complicate things with future new data structures. Alexei
suggested in [4] going back to v1 which is what this patch
tries to do.

Rerun './test_progs -j' with the above mdelay() hack for a couple
of times and didn't observe the error for the above rb_root test cases.
Running Hou's test ([1]) is also successful.

  [1] https://lore.kernel.org/bpf/20231207141500.917136-1-houtao@huaweicloud.com/
  [2] v1: https://lore.kernel.org/bpf/20231204173946.3066377-1-yonghong.song@linux.dev/
  [3] v5: https://lore.kernel.org/bpf/20231208041621.2968241-1-yonghong.song@linux.dev/
  [4] v4: https://lore.kernel.org/bpf/CAADnVQJ3FiXUhZJwX_81sjZvSYYKCFB3BT6P8D59RS2Gu+0Z7g@mail.gmail.com/

Cc: Hou Tao <houtao@huaweicloud.com>
Fixes: 958cf2e273f0 ("bpf: Introduce bpf_obj_new")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231214203815.1469107-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: don't mix SCMI and non-SCMI board compatibles

[ Upstream commit bfc3c6743de0ecb169026c36cbdbc0d12d22a528 ]

The binding erroneously decreed that the SCMI variants of the ST
evaluation kits are compatible with the non-SCMI variants.

This is not correct, as a kernel or bootloader compatible with the non-SCMI
variant is not necessarily able to function, when direct access
to resources is replaced by having to talk SCMI to the secure monitor.

The binding has been adjusted to reflect thus, so synchronize the device
trees now.

Fixes: 5b7e58313a77 ("ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: hisi_sas: Correct the number of global debugfs registers

[ Upstream commit 73e33f969ef05328766b23a99b2c07bfff765009 ]

In function debugfs_debugfs_snapshot_global_reg_v3_hw() it uses
debugfs_axi_reg.count (which is the number of axi debugfs registers) to
acquire the number of global debugfs registers.

Use debugfs_global_reg.count to acquire the number of global debugfs
registers instead.

Fixes: 623a4b6d5c2a ("scsi: hisi_sas: Move debugfs code to v3 hw driver")
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1702525516-51258-6-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: hisi_sas: Rollback some operations if FLR failed

[ Upstream commit 7ea3e7763c50b20a8bd25cf524ea0c6463de69be ]

We obtain the semaphore and set HISI_SAS_RESETTING_BIT in
hisi_sas_reset_prepare_v3_hw(), block the scsi host and set
HISI_SAS_REJECT_CMD_BIT in hisi_sas_controller_reset_prepare(), released
them in hisi_sas_controller_reset_done(). However, if the HW reset failure
in FLR results in early return, the semaphore and flag bits will not be
release.

Rollback some operations including clearing flags / releasing semaphore
when FLR is failed.

Fixes: e5ea48014adc ("scsi: hisi_sas: Implement handlers of PCIe FLR for v3 hw")
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1702525516-51258-5-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: hisi_sas: Check before using pointer variables

[ Upstream commit 8dd10296be8562a45c6c6794dd492a2b7dccede8 ]

In commit 4b329abc9180 ("scsi: hisi_sas: Move slot variable definition in
hisi_sas_abort_task()"), we move the variables slot to the function head.
However, the variable slot may be NULL, we should check it in each branch.

Fixes: 4b329abc9180 ("scsi: hisi_sas: Move slot variable definition in hisi_sas_abort_task()")
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1702525516-51258-4-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: hisi_sas: Replace with standard error code return value

[ Upstream commit d34ee535705eb43885bc0f561c63046f697355ad ]

In function hisi_sas_controller_prereset(), -ENOSYS (Function not
implemented) should be returned if the driver does not support .soft_reset.
Returns -EPERM (Operation not permitted) if HISI_SAS_RESETTING_BIT is
already be set.

In function _suspend_v3_hw(), returns -EPERM (Operation not permitted) if
HISI_SAS_RESETTING_BIT is already be set.

Fixes: 4522204ab218 ("scsi: hisi_sas: tidy host controller reset function a bit")
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1702525516-51258-3-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: qcom: Fix the return value when platform_get_resource_byname() fails

[ Upstream commit 3a747c5cf9b6c36649783b28d2ef8f9c92b16a0f ]

The return value should be -ENODEV indicating that the resource is not
provided in DT, not -ENOMEM. Fix it!

Fixes: c263b4ef737e ("scsi: ufs: core: mcq: Configure resource regions")
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-4-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: qcom: Fix the return value of ufs_qcom_ice_program_key()

[ Upstream commit 3bf7ab4ac30c03beecf57c052e87d5a38fb8aed6 ]

Currently, the function returns -EINVAL if algorithm other than AES-256-XTS
is requested. But the correct error code is -EOPNOTSUPP. Fix it!

Cc: Abel Vesa <abel.vesa@linaro.org>
Fixes: 56541c7c4468 ("scsi: ufs: ufs-qcom: Switch to the new ICE API")
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-3-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8mm: Reduce GPU to nominal speed

[ Upstream commit 1f794d3eed5345413c2b0cf1bcccc92d77681220 ]

When the GPU nodes were added, the GPU_PLL_OUT was configured
for 1000MHz, but this requires the SoC to run in overdrive mode
which requires an elevated voltage operating point.

Since this may run some boards out of spec, the default clock
should be set to 800MHz for nominal operating mode. Boards
that run at the higher voltage can update their clocks
accordingly.

Fixes: 4523be8e46be ("arm64: dts: imx8mm: Add GPU nodes for 2D and 3D core")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: white-hawk-cpu: Fix missing serial console pin control

[ Upstream commit fc67495680f60e88bb8ca43421c1dd628928d581 ]

The pin control description for the serial console was added, but not
enabled, due to missing pinctrl properties in the serial port device
node.

Fixes: 7a8d590de8132853 ("arm64: dts: renesas: white-hawk-cpu: Add serial port pin control")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/8a51516581cd71ecbfa174af9c7cebad1fc83c5b.1702459865.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: xilinx: Apply overlays to base dtbs

[ Upstream commit 23b697ec85f3e7beed271b9f344c54821de2251e ]

DT overlays in tree need to be applied to a base DTB to validate they
apply, to run schema checks on them, and to catch any errors at compile
time. Defining the "-dtbs" variable is not enough as the combined DT must
be added to dtbs-y.

zynqmp-sck-kr-g-revA.dtso and zynqmp-sck-kr-g-revB.dtso don't exist, so drop
them.

Signed-off-by: Rob Herring <robh@kernel.org>
Fixes: 45fe0dc4ea2e ("arm64: xilinx: Use zynqmp prefix for SOM dt overlays")
Link: https://lore.kernel.org/r/20230911214751.2202913-1-robh@kernel.org
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: Set memalloc_noio to false on device_add_disk() error path

[ Upstream commit 5fa3d1a00c2d4ba14f1300371ad39d5456e890d7 ]

On the error path of device_add_disk(), device's memalloc_noio flag was
set but not cleared. As the comment of pm_runtime_set_memalloc_noio(),
"The function should be called between device_add() and device_del()".
Clear this flag before device_del() now.

Fixes: 25e823c8c37d ("block/genhd.c: apply pm_runtime_set_memalloc_noio on block devices")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231211075356.1839282-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Relax time_tai test for equal timestamps in tai_forward

[ Upstream commit e1ba7f64b192f083b4423644be03bb9e3dc8ae84 ]

We're observing test flakiness on an arm64 platform which might not
have timestamps as precise as x86. The test log looks like:

  test_time_tai:PASS:tai_open 0 nsec
  test_time_tai:PASS:test_run 0 nsec
  test_time_tai:PASS:tai_ts1 0 nsec
  test_time_tai:PASS:tai_ts2 0 nsec
  test_time_tai:FAIL:tai_forward unexpected tai_forward: actual 1702348135471494160 <= expected 1702348135471494160
  test_time_tai:PASS:tai_gettime 0 nsec
  test_time_tai:PASS:tai_future_ts1 0 nsec
  test_time_tai:PASS:tai_future_ts2 0 nsec
  test_time_tai:PASS:tai_range_ts1 0 nsec
  test_time_tai:PASS:tai_range_ts2 0 nsec
  #199     time_tai:FAIL

This patch changes ASSERT_GT to ASSERT_GE in the tai_forward assertion
so that equal timestamps are permitted.

Fixes: 64e15820b987 ("selftests/bpf: Add BPF-helper test for CLOCK_TAI access")
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231212182911.3784108-1-zhuyifei@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: don't support triggered EHT CQI feedback

[ Upstream commit 637bbd5b3cbd0fc6945ebd2e311315b6cca1f9c5 ]

EHT CQI is one of the EHT PHY capabilities. We don't support EHT CQI.
The non-triggered CQI feedback bit was unset in a previous patch,
but the triggered CQI feedback bit wasn't. Unset it.

Fixes: 0e21ec6edbb5 ("wifi: iwlwifi: nvm: Update EHT capabilities for GL device")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20231207044813.092528daf59e.I5715769490835819beddb00c91bbc9e806e170cb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: mt7921: fix country count limitation for CLC

[ Upstream commit fa6ad88e023ddfa6c5dcdb466d159e89f451e305 ]

Due to the increase in the number of power tables for 6Ghz on CLC,
the variable nr_country is no longer sufficient to represent the
total quantity. Therefore, we have switched to calculating the
length of clc buf to obtain the correct power table. Additionally,
the version number has been incremented to 1.

Fixes: 23bdc5d8cadf ("wifi: mt76: mt7921: introduce Country Location Control support")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: mediatek: mt8186: fix address warning for ADSP mailboxes

[ Upstream commit 840e341bed3c4331061031dc9db0aff04abafb4b ]

Fix warnings reported by dtbs_check :

arch/arm64/boot/dts/mediatek/mt8186.dtsi:1163.35-1168.5: Warning (simple_bus_reg):
 /soc/mailbox@10686000: simple-bus unit address format error, expected "10686100"
arch/arm64/boot/dts/mediatek/mt8186.dtsi:1170.35-1175.5: Warning (simple_bus_reg):
 /soc/mailbox@10687000: simple-bus unit address format error, expected "10687100"

by having the right bus address as node name.

Fixes: 379cf0e639ae ("arm64: dts: mediatek: mt8186: Add ADSP mailbox nodes")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Link: https://lore.kernel.org/r/20231204135533.21327-1-eugen.hristev@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>