Mark Nauwelaerts [Tue, 9 Mar 2010 17:25:23 +0000 (18:25 +0100)]
flvdemux: refactor adding index entry
Mark Nauwelaerts [Wed, 17 Feb 2010 10:36:13 +0000 (11:36 +0100)]
flvdemux: fix setting DELTA_UNIT flag on outgoing buffers
... which should not depend on having index available or not.
Also refactor resulting collapsed code.
Mark Nauwelaerts [Thu, 11 Feb 2010 18:43:47 +0000 (19:43 +0100)]
qtdemux: avoid erroneous codec-data overriding of stsd information
Mark Nauwelaerts [Mon, 1 Feb 2010 21:37:30 +0000 (22:37 +0100)]
speexdec: adapt to new oggdemux
Remove all granulepos hacks and simply use upstream timestamps.
Mark Nauwelaerts [Mon, 1 Feb 2010 21:36:02 +0000 (22:36 +0100)]
speexdec: refactor granulepos hacks
Wim Taymans [Wed, 10 Mar 2010 10:19:46 +0000 (11:19 +0100)]
rtspsrc: parse connection information
Parse the connection information from the SDP and use it to figure out if we are
dealing with ipv4 or ipv6 connections.
Wim Taymans [Tue, 9 Mar 2010 16:53:32 +0000 (17:53 +0100)]
rtspsrc: require a destination for multicast
When setting up the multicast sockets, we need a destination address to listen
on or else we error.
Wim Taymans [Tue, 9 Mar 2010 16:52:35 +0000 (17:52 +0100)]
rtspsrc: handle ipv6 listening ports when needed
Add some code to make udpsrc listen on an ipv6 address when needed. The
detection of IPV6 is not yet implemented.
Wim Taymans [Tue, 9 Mar 2010 16:15:16 +0000 (17:15 +0100)]
udp: use uri parsing code
Use the uri parsing helper functions to manage the host and port pairs. This
adds support for IPV6.
Wim Taymans [Tue, 9 Mar 2010 16:13:31 +0000 (17:13 +0100)]
udpnetutils: add helper functions for udp uri handling
Add some helpers to parse udp uris. Make sure IPV6 is supported too.
Olivier Crête [Fri, 5 Mar 2010 15:08:45 +0000 (16:08 +0100)]
rtpsession: Make it possible to favor new sources in case of SSRC conflict
Add a "favor-new" property that tells the session to favor new sources when
there is a SSRC conflict. This is useful for SIP calls and other such cases
where a remote loop is extremely unlikely.
Fixes #607615
Olivier Crête [Fri, 5 Mar 2010 14:46:48 +0000 (15:46 +0100)]
rtpsession: Move SSRC conflicts lists into RTPSource
We will also need to track SSRC conflicts in remote sources.
See #607615
Wim Taymans [Fri, 26 Feb 2010 16:13:49 +0000 (17:13 +0100)]
rtspsrc: send keep alive when paused
When we are paused, send keep alive messages to the server so that our session
doesn't time out when we go back to playing later.
Tim-Philipp Müller [Wed, 10 Mar 2010 01:10:07 +0000 (01:10 +0000)]
Automatic update of common submodule
From 7aa65b5 to 7cc5eb4
David Schleef [Wed, 24 Feb 2010 03:48:10 +0000 (19:48 -0800)]
multifilesink: Add key-frame option to next-file
This allows segmenting of MPEG-TS files at key frames, which is
exactly what is needed for Apple's HTTP streaming.
Sebastian Dröge [Tue, 9 Mar 2010 21:32:47 +0000 (21:32 +0000)]
Automatic update of common submodule
From 44ecce7 to 7aa65b5
Sebastian Dröge [Mon, 8 Mar 2010 20:17:58 +0000 (20:17 +0000)]
videobox: Fix autocropping for odd width/height differences
Sebastian Dröge [Mon, 8 Mar 2010 20:02:19 +0000 (20:02 +0000)]
videobox: Use libgstvideo for format specific stuff
Sebastian Dröge [Mon, 8 Mar 2010 19:28:47 +0000 (19:28 +0000)]
audiofx: Sync properties to the stream time
Sebastian Dröge [Mon, 8 Mar 2010 19:20:59 +0000 (19:20 +0000)]
videobox: Make properties controllable
Sebastian Dröge [Mon, 8 Mar 2010 19:09:01 +0000 (19:09 +0000)]
videobox: Some cleanup
Sebastian Dröge [Sun, 28 Feb 2010 14:47:50 +0000 (15:47 +0100)]
effectv: Use controller where possible, optimize a bit and make properties threadsafe
Sebastian Dröge [Fri, 26 Feb 2010 15:35:17 +0000 (16:35 +0100)]
build: Make some more rules silent if requested
Sebastian Dröge [Fri, 26 Feb 2010 14:41:52 +0000 (15:41 +0100)]
configure: Use automake 1.11 silent rules instead of shave if available
This makes sure that we use something that is still maintained and
also brings back libtool 1.5 support.
Benjamin Otte [Mon, 8 Mar 2010 21:57:34 +0000 (22:57 +0100)]
png: fractions don't allow doubles
Benjamin Otte [Mon, 1 Mar 2010 11:03:56 +0000 (12:03 +0100)]
flx: fix description
It's video, not audio
Tim-Philipp Müller [Tue, 9 Mar 2010 17:45:27 +0000 (17:45 +0000)]
Back to development
Tim-Philipp Müller [Tue, 9 Mar 2010 00:28:16 +0000 (00:28 +0000)]
Release 0.10.21
Tim-Philipp Müller [Tue, 9 Mar 2010 00:24:45 +0000 (00:24 +0000)]
Update .po files
Tim-Philipp Müller [Tue, 9 Mar 2010 00:09:34 +0000 (00:09 +0000)]
Revert "Add 4:2:2, 4:1:1, and 4:4:4 output support"
This reverts commit
637c26f61a2bd8d7b01f8b6d081d94da65f74557.
Tim-Philipp Müller [Mon, 8 Mar 2010 23:42:51 +0000 (23:42 +0000)]
Release 0.10.20
Tim-Philipp Müller [Mon, 8 Mar 2010 23:42:06 +0000 (23:42 +0000)]
Update .po files
Tim-Philipp Müller [Mon, 8 Mar 2010 16:47:04 +0000 (16:47 +0000)]
flacdec: don't send second newsegment event in framed mode, fixes long playback delay
Don't send another newsegment event if the upstream muxer/parser has already
sent one (otherwise the sink will wait for $duration before starting playback).
Fixes long delay until playback starts with flac-in-ogg files.
Fixes #610959.
Wim Taymans [Fri, 5 Mar 2010 12:49:31 +0000 (13:49 +0100)]
rtspsrc: configure multicast correctly
Take the transport destination for multicast.
Disable loop and autojoin for multicast on the udpsinks.
Wim Taymans [Fri, 5 Mar 2010 12:47:33 +0000 (13:47 +0100)]
multicast: always configure loop and ttl
Also configure TTL and loop parameters when we add a client after initializing
the sender.
Wim Taymans [Mon, 8 Mar 2010 11:13:32 +0000 (12:13 +0100)]
Revert "rtph263depay: baseclass handles timestamps for us"
This reverts commit
564581e1b88ecd5ec5da82c3cafb0e7a2d58b302.
If we don't call push_ts, there will be no timestamp at all on the outgoing
buffer.
Fixes #612154
Benjamin M. Schwartz [Wed, 24 Feb 2010 03:16:39 +0000 (22:16 -0500)]
Add 4:2:2, 4:1:1, and 4:4:4 output support
Wim Taymans [Tue, 2 Mar 2010 12:21:24 +0000 (13:21 +0100)]
rtpsource: use payload size to estimate bitrate
Use the length of the payload for estimating the receiver bitrate so that it
matches the calculations done on the sender side. Together with the number of
packets one can scale the bitrate with the header overhead of the lower
transport.
Wim Taymans [Tue, 2 Mar 2010 11:39:20 +0000 (12:39 +0100)]
rtpsource: refactor bitrate estimation
Don't reuse the same variable we need for stats for the bitrate estimation
because we're updating it.
Refactor the bitrate estimation code so that both sender and receivers use the
same code path.
Tristan Matthews [Mon, 1 Mar 2010 21:40:27 +0000 (16:40 -0500)]
added bitrate estimation to receiver-side stats, fixes #611213
Wim Taymans [Mon, 1 Mar 2010 15:01:24 +0000 (16:01 +0100)]
h263pay: fix typo in debug
Tim-Philipp Müller [Sat, 6 Mar 2010 00:43:03 +0000 (00:43 +0000)]
Release 0.10.19
Tim-Philipp Müller [Sat, 6 Mar 2010 00:42:09 +0000 (00:42 +0000)]
Update .po files
Tim-Philipp Müller [Wed, 3 Mar 2010 20:29:30 +0000 (20:29 +0000)]
0.18.4 pre-release
Edward Hervey [Tue, 2 Mar 2010 17:29:41 +0000 (18:29 +0100)]
matroskademux: Make sure we don't send invalid newsegments
Fixes #611501
Edward Hervey [Tue, 2 Mar 2010 13:09:14 +0000 (14:09 +0100)]
matroskademux: Mark streams as being EOS at the right time.
This allows us to stop streaming only when all streams have gone past the
segment.stop and not before.
Fixes #611501
Sebastian Dröge [Fri, 26 Feb 2010 17:10:32 +0000 (18:10 +0100)]
matroskademux: Advance sparse streams only as much as required to keep the gap smaller than 500ms
Changing it to the newest timestamp that was ever pushed will
increase the segment start in 500ms jumps, which could be just
after the next sparse stream buffer. E.g.
Video at 1.0s, sparse stream at 0.5s would jump the
sparse stream to 1.0s. Now a new sparse stream buffer could
appear that has a timestamp of 0.9s and this would be
dropped for no good reason because of bad luck.
Tim-Philipp Müller [Wed, 24 Feb 2010 01:36:07 +0000 (01:36 +0000)]
0.10.18.3 pre-release
Alessandro Decina [Wed, 24 Feb 2010 01:05:49 +0000 (02:05 +0100)]
Make sure FLUSH_STOP is sent so not to leave downstream flushing.
Volker Grabsch [Tue, 23 Feb 2010 16:25:54 +0000 (17:25 +0100)]
configure: Use $PKG_CONFIG instead of pkg-config to fix cross compilation
Fixes bug #610839.
Sebastian Dröge [Tue, 23 Feb 2010 16:24:03 +0000 (17:24 +0100)]
rtpjitterbuffer: Reset skew detection after instantiating the jitterbuffer
...not only when going to READY. This sets high_level and friends to
a more useful value.
Sebastian Dröge [Tue, 23 Feb 2010 16:19:14 +0000 (17:19 +0100)]
rtpjitterbuffer: Return 100 if high-level is 0 instead of dividing by zero
Wim Taymans [Mon, 22 Feb 2010 11:24:14 +0000 (12:24 +0100)]
rtpmp4gdepay: avoid division by 0
Avoid a division by 0 when no constantDuration was specified and when out two
timestamps are equal.
Fixes #610265
Wim Taymans [Mon, 22 Feb 2010 17:20:46 +0000 (18:20 +0100)]
dvdepay: don't output frames until we have a header
Wait for the complete first 6 header DIF packets before outputting a frame.
Decoders need this info to correctly decode the data.
Fixes #610556
David Hoyt [Mon, 22 Feb 2010 19:55:29 +0000 (20:55 +0100)]
jpegdec: Fix invalid memory access by first checking and then reading
Fixes bug #610483.
Philippe Normand [Thu, 18 Feb 2010 08:05:50 +0000 (09:05 +0100)]
pulsesink: gst_pulsesink_get_mute: set result earlier.
In the cases where no buffer was process yet or the index is not
available, get_pulsesink_get_mute() would unconditionally return
FALSE.
https://bugzilla.gnome.org/show_bug.cgi?id=610337
Tim-Philipp Müller [Fri, 19 Feb 2010 12:35:29 +0000 (12:35 +0000)]
pkgconfig: fix gstreamer-plugins-good uninstalled .pc file
Fix gst-plugins-base reference/requirement. This caused spurious
problems with uninstalled -ugly/-bad not finding -good plugins in
their unit tests (when distchecking).
Tim-Philipp Müller [Fri, 19 Feb 2010 01:03:31 +0000 (01:03 +0000)]
0.10.18.2 pre-release
Tim-Philipp Müller [Fri, 19 Feb 2010 00:54:13 +0000 (00:54 +0000)]
Make git ignore shapewipe examples and tests
Tim-Philipp Müller [Fri, 19 Feb 2010 00:46:40 +0000 (00:46 +0000)]
flvdemux: minor micro-optimisation
We know these values don't change during the loop, but the compiler
doesn't and has to re-check them for every iteration.
Tim-Philipp Müller [Fri, 19 Feb 2010 00:39:50 +0000 (00:39 +0000)]
flvdemux: remove static keyword from variables that shouldn't be static
Multiple flvparse/flvdemux instances should be able to operate without
trampling over each other by accidentally re-using the same (static)
variables. (Spotted by Mark Nauwelaerts)
Tim-Philipp Müller [Tue, 16 Feb 2010 02:07:07 +0000 (02:07 +0000)]
docs: add Since: markers for new jitterbuffer properties
Robert Swain [Thu, 18 Feb 2010 17:20:24 +0000 (18:20 +0100)]
qtdemux: Fix off-by-one logic error in frame rate cap regression commit
Thiago Santos [Wed, 17 Feb 2010 19:27:33 +0000 (16:27 -0300)]
qtdemux: Use the correct duration when comparing segments
Do not confuse QtDemuxSegments with GstSegments when
comparing the total file duration with the segment duration
Fixes #610296
Robert Swain [Wed, 17 Feb 2010 17:06:29 +0000 (18:06 +0100)]
qtdemux: add durations modulo 1<<32
For calculating the durations of each sample, we are supposed to add each
duration modulo 1<<32 so make the elapsed time counter a uint32.
Fixes #610280
Anders Skargren [Tue, 16 Feb 2010 20:05:24 +0000 (21:05 +0100)]
multipartdemux: improve header mime-type parsing
Make the handing of the mime type within the "boundary" a bit less naive.
The standard for MIME allows parameters to follow the "type" / "subtype"
clause separated from the mime type by ';'.
Modifies the multipartdemuxer's header parsing so it doesnt assume
the whole line after "content-type:" is the mime type and thus makes it a bit
more resilient to finding absurd mime types in the case where parameters are
added.
Fixes #604711
Wim Taymans [Tue, 16 Feb 2010 18:53:09 +0000 (19:53 +0100)]
rtspsrc: avoid stopping NULL tasks
Check the task for NULL, it could be paused and set to NULL before.
Mark Nauwelaerts [Tue, 16 Feb 2010 15:22:28 +0000 (16:22 +0100)]
qtdemux: fix ALAC codec-data handling
ALAC codec-data apparently comes in (at least) two flavours (mov, mp4),
so use atom based parsing to retrieve required data, rather than
aiming for a specific offset.
See also #580731.
Mark Nauwelaerts [Tue, 16 Feb 2010 14:50:23 +0000 (15:50 +0100)]
qtdemux: fix debug message
Mark Nauwelaerts [Thu, 11 Feb 2010 18:39:04 +0000 (19:39 +0100)]
qtdemux: handle signed values in 3GPP location tag
Mark Nauwelaerts [Mon, 8 Feb 2010 20:35:53 +0000 (21:35 +0100)]
rtspsrc: fix typo in debug message
Mark Nauwelaerts [Tue, 16 Feb 2010 14:00:13 +0000 (15:00 +0100)]
avidemux: reset some more stream state after seek
In particular, fixes non-flushing seek.
Robert Swain [Tue, 16 Feb 2010 13:44:11 +0000 (14:44 +0100)]
qtdemux: Fix frame rate cap regression
Look for a non-zero min_duration during initialisation to avoid
incorrect frame rate caps.
Stefan Kost [Tue, 16 Feb 2010 08:13:17 +0000 (10:13 +0200)]
v4l2: log more details in buffer pool finalize
Helps to align with the loggin from libv4l.
Stefan Kost [Tue, 16 Feb 2010 08:11:40 +0000 (10:11 +0200)]
v4l2: init datastructures after pre-conditions checks
Stefan Kost [Tue, 16 Feb 2010 08:10:45 +0000 (10:10 +0200)]
jpegenc: add a fixme for handling other YUV variants
Brian Cameron [Tue, 16 Feb 2010 01:40:19 +0000 (01:40 +0000)]
matroska: fix GST_ELEMENT_ERROR usage
Fixes #610053.
Tim-Philipp Müller [Tue, 16 Feb 2010 00:50:15 +0000 (00:50 +0000)]
configure: fix up GST_CXXFLAGS properly
We don't want C specific flags in GST_CXXFLAGS, so base it on the
GST_CFLAGS that only contains the pkg-config CFLAGS but none of
the GST_OPTION_CFLAGS. Also, we only need the local includes once.
Fix typo as well (GST_FLAGS -> GST_CFLAGS).
Stefan Kost [Mon, 15 Feb 2010 21:13:46 +0000 (23:13 +0200)]
configure: base GST_CXXFLAGS on --cflags from pkg-config
pkg-config sets GST_CFLAGS and GST_LIBS. We need to use CFLAGS as a starting
point for for both C and CXX settings.
Wim Taymans [Wed, 20 Jan 2010 17:52:51 +0000 (18:52 +0100)]
rtpbin: remove use of ntp_ns_base
Wim Taymans [Wed, 20 Jan 2010 17:22:20 +0000 (18:22 +0100)]
rtpbin: remove more ntpnstime and cleanups
Remove some code where we pass ntpnstime around, we can do most things with the
running_time just fine.
Rename a variable in the ArrivalStats struct so that it's clear that this is the
current system time.
Wim Taymans [Wed, 20 Jan 2010 17:19:34 +0000 (18:19 +0100)]
rtpsource: use running_time for jitter
Use the running_time to calculate the jitter instead of the ntp time. Part of
the plan to get rid of ntpnsbase.
Wim Taymans [Wed, 20 Jan 2010 16:04:03 +0000 (17:04 +0100)]
rtpbin: change how NTP time is calculated in RTCP
Don't calculate the NTP time based on the running_time of the pipeline but from
the systemclock. This allows us to generate more accurate NTP timestamps in case
the systemclock is synchronized with NTP or similar.
Tim-Philipp Müller [Mon, 15 Feb 2010 12:12:36 +0000 (12:12 +0000)]
v4l2: printf format string fix
The compiler wants a cast here even though the type is already
typedefed as 64-bit integer (presumably because glib has typedefed
guint64 to unsigned long here).
Tim-Philipp Müller [Mon, 15 Feb 2010 10:33:02 +0000 (10:33 +0000)]
matroska: fix printf format string
Tim-Philipp Müller [Mon, 15 Feb 2010 00:50:10 +0000 (00:50 +0000)]
raw1394, matroska, rtpmanager: remove padding from structures
None of these element and class structures are in public headers,
so don't need padding.
Tim-Philipp Müller [Mon, 15 Feb 2010 00:47:11 +0000 (00:47 +0000)]
po: update for new translator comment
Tim-Philipp Müller [Mon, 15 Feb 2010 00:45:51 +0000 (00:45 +0000)]
pulsesink: add comment for translators for 'x by y' message
Fixes #609724.
Sebastian Dröge [Mon, 15 Feb 2010 00:28:44 +0000 (01:28 +0100)]
cairorender: Fix leaking of pad templates
Sebastian Dröge [Sun, 14 Feb 2010 23:50:27 +0000 (00:50 +0100)]
shapewipe: Fix unit test for latest changes
Now the alpha is multiplied with the already existing alpha
value instead of simply ignoring it and the luma/chroma values
are kept, even if the output is 100% transparent.
Sebastian Dröge [Sun, 14 Feb 2010 23:47:08 +0000 (00:47 +0100)]
shapewipe: Improve unit test output on errors
Sebastian Dröge [Sun, 14 Feb 2010 22:17:20 +0000 (23:17 +0100)]
Automatic update of common submodule
From 96dc793 to 44ecce7
Tim-Philipp Müller [Sat, 13 Feb 2010 23:28:06 +0000 (23:28 +0000)]
configure: bump -base requirement to git
For GST_RIFF_TAG_JUNQ.
Tim-Philipp Müller [Fri, 12 Feb 2010 16:11:30 +0000 (16:11 +0000)]
v4l2sink: change rank to NONE so it is never autoplugged
Edward Hervey [Sat, 13 Feb 2010 17:18:42 +0000 (18:18 +0100)]
flvdemux: Audio tags without any content are valid.
We silently ignore them instead of erroring out.
Edward Hervey [Sat, 13 Feb 2010 17:07:50 +0000 (18:07 +0100)]
flvdemux: Fix GST_CLOCK_DIFF usage.
It was previously checking for DIFF(a, b > 6 * GST_SECOND) instead of
the proper DIFF(a,b) > 6 * GST_SECOND
Edward Hervey [Sat, 13 Feb 2010 15:27:07 +0000 (16:27 +0100)]
flvdemux: Don't forget to reset the indexed variable when cleaning up
Edward Hervey [Sat, 13 Feb 2010 10:01:53 +0000 (11:01 +0100)]
flvdemux: Speedup GstIndex usage
Used the _add_associationv variant of GstIndex since we know how many
associations we're adding. Trims up to 50% from index generation time.
Note : It would be great if the index could be generated on the fly or
on request as opposed to being fully created at startup.
Wim Taymans [Fri, 12 Feb 2010 18:32:27 +0000 (19:32 +0100)]
jitterbuffer: don't resync to invalid timestamps
If we detect backward timestamps on the server, don't try to resync when we
don't have an input timestamp (such as when using RTSP over TCP) instead, do
nothing but assume the timestamp was ok, it will correct itself when time goes
forwards.
Wim Taymans [Fri, 12 Feb 2010 16:21:43 +0000 (17:21 +0100)]
rtpbin: fix typo