staging: comedi: das08: rename DAS08_OP() and DAS08_DO_MASK

The `DAS08_DO_MASK` macro is a bitmask for the control register
corresponding to the digital output channels (except on "JR" boards).
Rename it to `DAS08_CONTROL_DO_MASK` and add a comment.

The `DAS08_OP(x)` macro takes a bitvector of the desired digital output
channel states and returns the corresponding bits for the control
register (except on "JR" boards).  Rename it to `DAS08_CONTROL_DO(x)`
and add a comment.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08: rename and rewrite DAS08_INTE

The `DAS08_INTE` macro contains a mask for the "INTE" bit in the control
register (except on "JR" boards).  Setting it to 1 enables interrupts.
Setting it to 0 disables interrupts and clears the "IRQ" bit in the
status register.  Rename the macro to `DAS08_CONTROL_INTE` and add a
comment.  Also use the `BIT()` macro to define its value.  (Note: the
driver does not currently enable interrupts.)

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08: rename DAS08_MUX() and DAS08_MUX_MASK

The `DAS08_MUX_MASK` macro is a bitmask for the control register
corresponding to the analog input multiplexor channel selection bits.
Rename it to `DAS08_CONTROL_MUX_MASK` and add a comment.  Note that the
current setting of the multiplexor can also be read from the same bit
positions in the status register, but the driver does not use it.  Add a
comment to that effect.

The `DAS08_MUX(x)` macro takes an analog input channel number and
returns the corresponding analog input multiplexor channel selection
bits for the control register.  Rename it to `DAS08_CONTROL_MUX(x)` and
add a comment.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08: rename DAS08_CONTROL

The `DAS08_CONTROL` macro contains the offset to the write-only control
register.  Rename it to `DAS08_CONTROL_REG` and add a comment.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08: rename and rewrite DAS08_IP

The `DAS08_IP()` macro takes a value read from the status register and
returns the state of the three digital input channels (except on "JR"
boards).  Rename it to `DAS08_STATUS_DI()` and add a comment.  Also
re-arrange the expression used to extract the state of the digital
inputs for consistency with other register macros.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08: rename and rewrite DAS08_IRQ

The `DAS08_IRQ` macro contains a mask for the "IRQ" status bit.  This is
set to 1 when a rising edge is detected on the external interrupt input
pin of the external connector (which may be jumpered to a pacer output).
It is cleared by setting the "INTE" control bit to 0.  It is not used on
"JR" boards.  Rename the macro to `DAS08_STATUS_IRQ` and add a comment.
Also use the `BIT()` macro to define the value.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08: rename and rewrite DAS08_EOC

The `DAS08_EOC` macro contains a mask for the "end of A/D conversion"
bit in the status register.  The logic is reverse sense in that the bit
is set to 1 while the conversion is in progress and set to 0 when the
conversion is complete.  Rename the macro to `DAS08_STATUS_AI_BUSY` and
add a comment.  Also make use of the `BIT()` macro to define the value.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08: rename DAS08_STATUS

The `DAS08_STATUS` macro contains the offset to the read-only status
register.  Rename it to `DAS08_STATUS_REG` and add a comment.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08: rename DAS08_TRIG_12BIT

The `DAS08_TRIG_12BIT` macro contains the offset to the write-only
software trigger register for 12-bit or 16-bit analog-to-digital
conversions.  Rename the macro to `DAS08_AI_TRIG_REG` and add a comment.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08: rename DAS08_LSB and DAS08_MSB

The `DAS08_LSB` and `DAS08_MSB` macros contain the offsets to the
least-significant and most-significant analog input data registers.
Rename them to `DAS08_AI_LSB_REG` and `DAS08_AI_MSB_REG` respectively
and add comments to document them.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08.h: make self-reliant

The Comedi "das08.h" header file is included by drivers for the
ComputerBoards/MeasurementComputing and Keithley Metrabyte boards in the
DAS08 series.  It does not compile cleanly when it is the first header
included by the ".c" file.  It uses `struct comedi_device *` in the
parameter list of a function prototype, so just declare `struct
comedi_device` as an incomplete type.  It also uses `bool`, so include
<linux/types.h> to declare it.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08: improve test for programmable gain

`das08_ai_rinsn()` handles Comedi `INSN_READ` instructions for the AI
subdevice.  This programs the gain for the analog input channel if the
board has support for that, and acquires data from the channel.  If
programmable gain is supported, the gain code is read from the array
pointed to by `devpriv->pg_gainlist` indexed by the range index.  The
function assumes that programmable gain is supported if the AI
subdevice's range table supports more than one range.  Replace that with
a more direct test for `devpriv->pg_gainlist` being non-NULL, as it is
only initialized to a non-NULL pointer for boards that support
programmable gain.

This will also allow range tables to be included for convenience for
those boards that support multiple ranges by DIP switches.  Those boards
are currently initialized to use a single "unknown" range.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08: use indexed initializer for AI range table types

The "das08" common module for DAS08 ISA, PCI, and PCMCIA drivers
includes a predefined set of AI range tables.  The static board data (of
type `struct das08_board_struct`) for a particular board contains an
index in its `ai_pg` member (of type `enum das08_lrange`) indicating
which of the predefined AI range tables to use.  The "das08" common
module looks up this index in `das08_ai_lranges[]` to get a pointer to
the predefined range table for the board.  The same index is also looked
up in `das08_gainlists[]` to get a corresponding pointer to a list of
hardware gain values for each range supported by the board (NULL for
boards without programmable gain).

To make this clearer, used indexed initializers for `das08_ai_lranges[]`
and `das08_gainlists[]`, using the enumerated constants from `enum
das08_lrange` as the indices.  Also add a short comment to the
definition of `enum das08_lrange`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08.h: reformat remaining comments

Reformat remaining comments to use the preferred style for single-line
and block comments.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08.h: change description in copyright header comment

The copyright header comment includes a single-line description saying
it is for "das08.c" and "das08_cs.c".  However, it is also used by
"das08_isa.c" and "das08_pci.c".  Update the description to say it is
for common DAS08 support, similar to description in "das08.c" (the
common module for the DAS08 ISA/PCI/PCMCIA drivers).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das08.h: reformat copyright comment

Reformat the copyright comment at the top of the file to use the
preferred block comment style.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcimdas: fix handlers for DI and DO subdevices

Normally, low-level Comedi drivers set an `insn_bits` handler for
digital input (DI), digital output (DO) and digital input/output (DIO)
subdevice types to handle normal reading and writing of digital
channels.  The "cb_pcimdas" driver currently has an `insn_read` handler
for the DI subdevice and an `insn_write` handler for the DO subdevice.
However, the actual handler functions `cb_pcimdas_di_insn_read()` and
`cb_pcimdas_do_insn_write()` are written to behave like `insn_bits`
handlers.  Something's wrong there!  To fix it, set the functions as
`insn_bits` handlers and rename them for consistency.

Fixes: e56d03dee14a ("staging: comedi: cb_pcimdas: add main connector digital input/output")
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:lustre: Update license and copyright for the LNET headers

Point to the right place for GNU license. Update Intel copyright.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:lustre: LNet header code cleanup - indentation etc

Handle all the style issues reported by checkpatch.pl.
Remove general white spaces, spaces in function calls,
alignments etc.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:lustre: fix camel case for LNetInit and LNetFini

For the functions LNetInit and LNetFini move away from
camel case to lnet_init and lnet_fini.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:lustre: separate kernel and user land defines in the LNet headers

Currently the lnet headers used by user land contain various internal
LNet structures that are only used by kernel space. Move the user land
structures to headers used by user land. The kernel structures are
relocated to headers that are never exposed to user land.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:lustre: move LNet NID macros to LNet layer

Currently several special macros LNet NID macros exist
in libcfs.h and libcfs_private.h. Move those macros
out to the lnet header types.h. The new lnet header
nidstr.h contains LNet NID string data that can be
used by user land LNet utilities and the LNet kernel
drivers.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:lustre: merge socklnd_lib-linux.h into socklnd.h

Originally socklnd_lib-linux.h contained linux specific
wrappers and defines but since the linux kernel is the
only supported platform now we can merge what little
remains in the header into socklnd.h. This is broken
out of the original patch 12932 that was merged to the
Intel/OpenSFS branch.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/12932
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:lustre: rename socklnd_lib-linux.c

With the move to support only the linux kernel their is
no need to keep "linux" in the socklnd source file names.
This is broken out of the original patch 12932 that was
merged to the Intel/OpenSFS branch.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/12932
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:lustre: remove lnet/include/lnet/linux/

Remove the linux specific headers from lnet/include/lnet/linux/,
moving whatever was worthwhile from them to their parent headers or
elsewhere.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/12932
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:lustre: Delete all obsolete LND drivers

Remove ralnd, ptllnd, mxlnd, qswlnd drivers. They are no
longer supported and have not even been buildable
for a long time.

Signed-off-by: James Simmons <uja.ornl@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6209
Reviewed-on: http://review.whamcloud.com/13663
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: change WILC_BOOL to bool

change own data type(WILC_BOOL) to common data type(bool)
but that's contain true/false value. so change with them.

Signed-off-by: Dean Lee <dean.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove unused typedef

Remove unused typedef for custom data types.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: use memdup_user

This patch replaces the kmalloc followed by copy_from_user by the
wrapper routine memdup_user.

Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: modify odd print message

This driver has odd message in print string.
So this patch removes the data type.

Signed-off-by: Dean Lee <dean.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix warning while printing

size_t should print using %zu, but here it was use %lu.
we were getting warning while printing.

Signed-off-by: Chris Park <chris.park@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove WILC_Sint64

remove unused WILC_Sint64.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove WILC_Sint32

Use s32 instead of WILC_Sint32.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove WILC_Sint16

Use s16 instead of WILC_Sint16.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove WILC_Sint8

Use s8 instead of WILC_Sint8.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove WILC_Uint64

Use u64 instead of WILC_Uint64.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove WILC_Uint32

Use u32 instead of WILC_Uint32.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove WILC_Uint16

Use u16 instead of WILC_Uint16.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove UWORD32

Use u32 instead of UWORD32.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove UWORD8

Use u8 instead of UWORD8.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre: ptlrpc: Replace uses of OBD_{ALLOC,FREE}_LARGE

Replace uses of OBD_ALLOC_LARGE by libcfs_kvzalloc and OBD_FREE_LARGE by
kvfree.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression ptr,size;
@@

- OBD_ALLOC_LARGE(ptr,size)
+ ptr = libcfs_kvzalloc(size, GFP_NOFS)

@@
expression ptr,size;
@@

- OBD_FREE_LARGE(ptr, size);
+ kvfree(ptr);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre: obdclass: linux: Replace uses of OBD_{ALLOC, FREE}_LARGE

Replace uses of OBD_ALLOC_LARGE by libcfs_kvzalloc and OBD_FREE_LARGE by
kvfree.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression ptr,size;
@@

- OBD_ALLOC_LARGE(ptr,size)
+ ptr = libcfs_kvzalloc(size, GFP_NOFS)

@@
expression ptr,size;
@@

- OBD_FREE_LARGE(ptr, size);
+ kvfree(ptr);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre: obdclass: Replace uses of OBD_{ALLOC,FREE}_LARGE

Replace uses of OBD_ALLOC_LARGE by libcfs_kvzalloc and OBD_FREE_LARGE by
kvfree.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression ptr,size;
@@

- OBD_ALLOC_LARGE(ptr,size)
+ ptr = libcfs_kvzalloc(size, GFP_NOFS)

@@
expression ptr,size;
@@

- OBD_FREE_LARGE(ptr, size);
+ kvfree(ptr);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre: mdc: Replace uses of OBD_{ALLOC,FREE}_LARGE

Replace uses of OBD_ALLOC_LARGE by libcfs_kvzalloc and OBD_FREE_LARGE by
kvfree.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression ptr,size;
@@

- OBD_ALLOC_LARGE(ptr,size)
+ ptr = libcfs_kvzalloc(size, GFP_NOFS)

@@
expression ptr,size;
@@

- OBD_FREE_LARGE(ptr, size);
+ kvfree(ptr);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre: lov: Replace uses of OBD_{ALLOC,FREE}_LARGE

Replace uses of OBD_ALLOC_LARGE by libcfs_kvzalloc and OBD_FREE_LARGE by
kvfree.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression ptr,size;
@@

- OBD_ALLOC_LARGE(ptr,size)
+ ptr = libcfs_kvzalloc(size, GFP_NOFS)

@@
expression ptr,size;
@@

- OBD_FREE_LARGE(ptr, size);
+ kvfree(ptr);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre: lmv: Replace uses of OBD_{ALLOC,FREE}_LARGE

Replace uses of OBD_ALLOC_LARGE by libcfs_kvzalloc and OBD_FREE_LARGE by
kvfree.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression ptr,size;
@@

- OBD_ALLOC_LARGE(ptr,size)
+ ptr = libcfs_kvzalloc(size, GFP_NOFS)

@@
expression ptr,size;
@@

- OBD_FREE_LARGE(ptr, size);
+ kvfree(ptr);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre: llite: Replace uses of OBD_{ALLOC,FREE}_LARGE

Replace uses of OBD_ALLOC_LARGE by libcfs_kvzalloc and OBD_FREE_LARGE by
kvfree.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression ptr,size;
@@

- OBD_ALLOC_LARGE(ptr,size)
+ ptr = libcfs_kvzalloc(size, GFP_NOFS)

@@
expression ptr,size;
@@

- OBD_FREE_LARGE(ptr, size);
+ kvfree(ptr);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: fix ll_getname user buffer copy

strncpy_from_user could return negative values on error,
so need to take those into account.
Since ll_getname is used to get a single component name from userspace
to transfer to server as-is, there's no need to allocate 4k buffer
as done by __getname. Allocate NAME_MAX+1 buffer instead to ensure
we have enough for a null terminated max valid length buffer.

This was discovered by Al Viro in https://lkml.org/lkml/2015/4/11/243

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: remove LL_IOC_REMOVE_ENTRY handler

It uses getname in unsafe manner and since it's to deal with corrupted
or inconsistent filesystem, we are probably better to deal with
it from lfsck anyway.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-v4.2c' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Third round of new IIO drivers, cleanups and functionality for the 4.2 cycle.

Given Linus announced a 4.8rc coming up, hopefully time for one more
lot of IIO patches this cycle.  Some of these are actually
improvements / fixes for patches earlier in the cycle.

New device support
* st_accel driver - support devices with 8 bit channels.

Cleanup
* A general cleanup of the iio tools under /tools/ from Hartmut.
  I'm more than a little embarassed by how bad some of these were! Are well,
  much more refined and less bug prone now.
  These cover lots of stuff like unhandled error returns, memory leaks as
  well as general refactoring to tidy the code up.
* iio_simple_dummy - fix memory leaks in the init functions, drop some
  pointless error returns from functions that never generate errors and
  make the module parameter explicitly unsigned.
* More buffer handling reworks from Lars-Peter, this time targetting hardware
  buffers (a little used corner that looks likely to get more use in the near
  future). Specifically:
  - Always compute the masklength as inkernel buffer users may need it.
  - Add a means of labeling which buffer modes a given buffer implementation
    supports.
  - In the case of hardware buffers, require strict scan matching rather than
    matching to a superset.  Currently the demux is bypassed by these drivers
    (this may well not change for efficiency reasons) so allowing a superset
    of channels to be selected would otherwise lead to more data than requested
    confusing userspace.

Driver funcationality improvments
* mmc35240 - adds a compensation to the raw values as borrowed form Memsic's
  own input driver.
* mma8452
  - event support
  - event debouncing
  - high  pass filter configuration
  - triggers
* vf610 - allow conversion mode to be adjusted

Fixlets
* mmc35240
  - Off by one error that by coincidence had no real effect.
  - i2c_device_name should be lowercase.
  - Lack of null terminator at end of attributes array.
  - Avoid computing the fractional part of the magnetic field by moving
    the scaling into userspace where floating point is available to simplify
    the maths.
  - Use a smaller sleep before assuming the measurement is done.  This is
    safe and improves the possible polling rate.
  - Fix sensitivity on z-axis - datasheet disagrees with Memsic's releasedd
    code and the value used in the code seems to be correct.
* stk3310 - make a local variable signed to ensure error handling works.
* twl4030
  - fix calculation of the temperature sense current - bug unlikely
    to have ever been noticed as the difference is small.
  - Fix errors in descriptions.

staging: rtl8188eu: eliminate spaces before commas

Eliminate "space prohibited before that ','" errors found by checkpatch,
but do this only to lines which after the patch is applied do not
exceed 80 characters. Out of that only those lines are changed, whose
context does not exceed 80 characters in each line. In other words the
changes are limited to cases where the patch generated is itself
checkpatch-correct.

Rebased onto next-20150605.

Signed-off-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: fix space before and after comma in dt_object.c

Fixes a space prohibited before that ',' and space required after
that ',' error in lustre/lustre/obdclass/dt_object.c that were
found by the checkpatch.pl tool.

Signed-off-by: Zoltán Lajos Kis <zoltan.lajos.kis@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: fix braces are not necessary in dt_object.c

Fixes a braces {} are not necessary for any arm of this statement
warning in lustre/lustre/obdclass/dt_object.c that was found by
the checkpatch.pl tool.

Signed-off-by: Zoltán Lajos Kis <zoltan.lajos.kis@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: fix line over 80 characters in dt_object.c

Fixes a line over 80 characters warining in
lustre/lustre/obdclass/dt_object.c that was found by the
checkpatch.pl tool.

Signed-off-by: Zoltán Lajos Kis <zoltan.lajos.kis@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: o2iblnd: use swap() in kiblnd_dev_failover()

Use kernel.h macro definition.

Thanks to Julia Lawall for Coccinelle scripting support.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:lustre: Update license and copyright for lib-socket.c

Point to the right place for GNU license. Update Intel copyright.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:lustre: lib-socket.c code cleanup - indentation etc

Handle all the style issues reported by checkpatch.pl.
Remove general white spaces, spaces in function calls,
etc.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:lustre: use available kernel wrappers in lib-socket.c

Instead of handling calls to struct proto ourselves we can use
equivalent kernel wrappers. No wrapper exist for unlocked ioctl
handling so we create one here for our use. I expect some day
that function will be integrated into sock.c.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:lustre: rename tcpip handling functions to lnet_* prefix

With all the TCPIP handling done in the lnet layer we should
rename all the functions with the prefix lnet_*. One other
change done was changing the remove argument of lnet_sock_getaddr
from a int to a bool.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:lustre: remove useless libcfs_sock_abort_accept

Another one of those silly one line wrappers which is not
needed. Replace libcfs_sock_abort_accept wrapper with a
direct call to wake_up_all on the lnet_acceptor_state sock.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:lustre: remove useless libcfs_sock_release

There is no reason to have a one line exported function
libcfs_sock_release. Instead we can call sock_release directly.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:lustre: move tcpip abstraction

Rename libcfs/linux/linux-tcpip.c to lnet/lnet/lib-socket.c

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: coreconfigurator: Align enums and defines

Aligned enum members and defines to follow a common style
per enum/(group of defines).

Signed-off-by: Stanislav Kholmanskikh <kholmanskikh.s.s@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: coreconfigurator: Change return(X) to return X

Changed 'return(X)' to 'return X' in coreconfigurator.c
to satisfy checkpatch.pl warning:

ERROR: return is not a function, parentheses are not required

Signed-off-by: Stanislav Kholmanskikh <kholmanskikh.s.s@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: coreconfigurator: Remove spaces before "\n"

In accordance to checkpatch.pl, a space before a quoted
newline ("\n") is unnecessary, therefore substituted " \n"
with "\n" in coreconfigurator.c

Signed-off-by: Stanislav Kholmanskikh <kholmanskikh.s.s@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove uninitialized warnings

This patch is for the initialization of the local variables.

Signed-off-by: Johnny Kim <johnny.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: modify printk format

This remove compile warnings about printk format.

Signed-off-by: Johnny Kim <johnny.kim@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix build warning related to time_after_eq macro

This patch fixes a build warning related to the use of the time_after_eq
macro.Adding a typecast to the second argument suppresses the
warning.This warning was created by one my previous patch.

Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove unused variables

removed few variables which are assigned but
never used.

Signed-off-by: Madhusudhanan Ravindran <mravindr@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: fix build error

while building on i386 it gives a build warning about msg undeclared.

Fixes: e6ffd1ba55a4931c ("staging: fbtft: fix out of bound access")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: st_accel: support the LIS331DL sensor

This adds support for the LIS331DL sensor version. This is
a simple 8bit-only accelerometer.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: rtl8188eu: core/rtw_led.c: fix coding style issue

Convert spaces at the start of a line to a tab.

Signed-off-by: Markus Böhme <markus.boehme@mailbox.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: fix some confusing indenting

The indenting here causes a static checker warning:

drivers/staging/rtl8192e/rtllib_rx.c:626 RxReorderIndicatePacket()
warn: curly braces intended?

The code is actually correct, it's just that these lines were pushed in
an extra indent level by mistake in 35e33b0468ab ('staging: rtl8192e:
Fix LONG_LINE warnings').

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove dead code: mp_adapter

mp_adapter structure was used in past, but now is only initialized and
never read.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove dead code: r8192_priv members

Remove unused members of rtl8192_priv structure.
Some of them are never used, other are just initialized and
never accessed.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove dead code: rt_stats

Remove unused fields from rt_stats structure.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove dead code: undefined arrays

Remove undefined and unused PHY array forward-declarations.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove dead code: rtl_dm.[ch]

- Remove unused fields in dig_t structures. Some of them were only
  initialized and never accessed.
- Remove unused enums/macros/defines in rtl_dm.h
- Remove duplicated function declarations
- Remove unused dm_change_dynamic_initgain_thresh() function
- Remove unused dm_shadow_init() function

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove unused macros/structures in rtl_core.h

- Removed unused macros/enums/structures
- Remove unused fields in r8192_priv

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove dead code: read/write_cam

Both functions are never used.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove dead code: cmpk_message_handle_rx()

Remove cmpk_message_handle_rx() and static functions used by it.
This function was never called.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove dead code: cmpk_handle_query_config_rx()

Remove cmpk_handle_query_config_rx function. It is called
once, does some calculation, but generates no output -
it has neither return value, nor modify its parameters.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove dead code

Delete unused code. Removed some macros, enums, unions and several
structures (tx_fwinfo, wmm_tspec, qos_tstream, sta_qos, bss_qos).

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: Remove two useless lines at ieee80211_wep_null

Remove two lines at ieee80211_wep_null which checkpatch.pl reported as errors.
The first one because it has a C99 comment style and the second one because it is a void
return which is useless.
The function ieee80211_wep_null cannot be completely removed because it is exported and
used to autoload the module.

Signed-off-by: Pedro Marzo Perez <marzo.pedro@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: Simplify error check code at prism2_wep_init

Simplify prism2_wep_init error check code employing goto when a failure is detected.
Removed pr_debug which was given a checkpatch.pl error because of literal string
 splitted across two lines of code, it was seldom going to be printed anyway.

Signed-off-by: Pedro Marzo Perez <marzo.pedro@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: ieee80211: Fix sparse endianness warnings

Fix the following sparse warnings:

drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:663:32: warning: incorrect type in assignment (different base types)
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:663:32:    expected restricted __le16 [usertype] frame_ctl
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:663:32:    got int
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:664:50: warning: invalid assignment: |=
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:664:50:    left side has type restricted __le16
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:664:50:    right side has type int

Signed-off-by: Gaston Gonzalez <gascoar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u/ieee80211/ieee80211_softmac.c: auth parse error code byte order fix

auth_parse() return result is in incorrect le16 byte order. Currently
this still works since the user code merely checks if error code is
equal to 0. However debug statement in ieee80211_check_auth_response()
prints the error code in the incorrect le16 byte order. This fix
corrects the byte order as cpu order.

Signed-off-by: Tolga Ceylan <tolga.ceylan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: prevent a couple of underflows

The underflow in OZ_DATA_F_ISOC_FIXED seems not harmful, but this patch
is a clean up and makes my static checker a bit happier.

The underflow in OZ_VENDOR_CLASS_RSP seems like it could result in
memory corruption.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: r819xU_firmware.h: fix line over 80 characters

Fixed coding style issue line "over 80 characters" detected by
checkpatch.pl in r819xU_firmware.h

Signed-off-by: Buţiu Alexandru Octavian <predator5047@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: drivers: rtl8192u: r819xU_firmware.h: removed commented macro

Removed commented macro that was no longer needed

Signed-off-by: Buţiu Alexandru Octavian <predator5047@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: use table to get channel plan from country code

Use a table to get a channel plan from a given country code.This was a
TODO mentioned as a comment in the driver.

Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: Use common pci_get_bus_and_slot() instead of private one

We already have a inline pci_get_bus_and_slot() in include/linux/pci.h,
Use it instead of local one.

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8712:Fix compressed return statement

Fix reported by coccinelle compressing last two lines with single return
call

Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Add the bus device to the visor device list.

When the bus device was created the list_all variables were not
being initialized. When the CONTROLVM_BUS_CONFIGURE message
was being sent, it was failing to find the bus and produced a
panic. Initialize the bus_info->list_all variable by doing a
INIT_LIST_HEAD.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Fix clean up path

When unloading a module, we need to cleanup the platform registration.
However, unregistering the platform uncovered a couple of quirks, namely
a missing device_release function.  Fix things up so module unload works
and allows us to reload the module.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Fix double sysfs create for module version

When we combined visorchipset and visorbus into one driver we negelected
to strip out some of the MODULE_ stuff from one of the files.  When
building the drivers in, it causes a WARN that we try to create
/proc/modules/visorbus/version when it is already created.

visorchipset.c is the driver entry point, remove the cruft from
visorbus_main.c.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Clean up diag_serverity enum

Get rid of unused values in the enum.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Remove unneeded fields in diagchannel.h

Diagchannel.h is used primarily for the diagnostics channel. The
diagnostics channel is not being used by linux guests currently, so
the majority of the file is not needed. What is left is what is
needed to perform postcode vmcalls. Those postcodes will eventually
end up in the diag channel.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Update diag serverity enum

Give the enum the correct values instead of based on other values.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Removed unused entries from struct visor_channeltype_descriptor

min_size/max_size aren't used anywhere, and they were just causing
headaches in the drivers being ported over to the new interfaces.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>