Arnd Bergmann [Thu, 21 Dec 2017 17:11:41 +0000 (18:11 +0100)]
Merge tag 'v4.15-next-soc' of ssh://gitolite./linux/kernel/git/matthias.bgg/linux into next/soc
Pull "arm: Updates for soc driver for v4.15-next" from Matthias Brugger:
- change kconfig entry for armv7 SoCs to be more generic
- add support for mt2701 scpsys driver
binding documentation
extend driver to allow the bus protection to overwrite the register
* tag 'v4.15-next-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: add MT2712 scpsys support
soc: mediatek: add dependent clock jpgdec/audio for scpsys
soc: mediatek: extend bus protection API
dt-bindings: soc: add MT2712 power dt-bindings
ARM: mediatek: use more generic prompts for SoCs with ARMv7
Arnd Bergmann [Thu, 21 Dec 2017 16:57:04 +0000 (17:57 +0100)]
Merge tag 'tegra-for-4.16-soc-2' of ssh://gitolite./linux/kernel/git/tegra/linux into next/soc
Pull "soc/tegra: Changes for v4.16-rc1" from Thierry Reding:
Fuse and chip ID support for Tegra186 is added in this set of changes,
followed by some unification work for the PMC driver in order to avoid
code duplication between Tegra186 and prior chips.
This also contains a couple of fixes for reading fuses on Tegra20.
* tag 'tegra-for-4.16-soc-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: fuse: Explicitly request DMA channel from APB DMA driver
soc/tegra: fuse: Fix reading registers using DMA on Tegra20
soc/tegra: pmc: Consolidate Tegra186 support
soc/tegra: pmc: Parameterize driver
soc/tegra: fuse: Add Tegra186 chip ID support
soc/tegra: fuse: Warn if accessing unmapped registers
soc/tegra: fuse: Move register mapping check
soc/tegra: fuse: Add Tegra186 support
dt-bindings: misc: Add Tegra186 MISC registers bindings
Arnd Bergmann [Thu, 21 Dec 2017 16:51:16 +0000 (17:51 +0100)]
Merge tag 'samsung-defconfig-4.16' of ssh://gitolite./linux/kernel/git/krzk/linux into next/soc
Pull "Samsung defconfig changes for v4.16" from Krzysztof Kozłowski:
1. Enable missing drivers for supported Exynos boards (PMU, CEC, MHL
bridge, ASoC for Odroid XU3/XU4).
2. Enable Exynos IOMMU driver on exynos_defconfig.
* tag 'samsung-defconfig-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos_defconfig: Enable CONFIG_EXYNOS_IOMMU
ARM: multi_v7_defconfig: Enable missing drivers for supported Exynos boards
ARM: exynos_defconfig: Enable missing drivers for supported Exynos boards
Arnd Bergmann [Thu, 21 Dec 2017 16:22:26 +0000 (17:22 +0100)]
Merge tag 'omap-for-v4.15/defconfig-v2-signed' of ssh://gitolite./linux/kernel/git/tmlind/linux-omap into next/soc
Pull "One old minor pull request pending" from Tony Lindgren:
Few omap2plus_defconfig changes for v4.15 merge window to enable NEON
based crypto and droid 4 USB PHY.
* tag 'omap-for-v4.15/defconfig-v2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Enable droid 4 USB PHY
ARM: omap2plus_defconfig: enable NEON based crypto
Arnd Bergmann [Thu, 21 Dec 2017 16:17:40 +0000 (17:17 +0100)]
Merge tag 'omap-for-v4.16/soc-signed' of ssh://gitolite./linux/kernel/git/tmlind/linux-omap into next/soc
Pull "SoC changes for omaps for v4.16 merge window" from Tony Lindgren:
For most part this is a series from Tero Kristo to prepare things
for using clkctrl clocks with DTS data. The other changes are to
make few data structures const.
* tag 'omap-for-v4.16/soc-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: CM: make cm_ll_data structures as const
ARM: OMAP2+: CM: make some pointers and function arguments as const
ARM: DM816x: hwmod_data: fix clockdomain name for sata hwmod
ARM: OMAP2+: hwmod: calculate physical register address on am33xx
ARM: AM33xx: CM: add support for getting physical address for a register
ARM: OMAP2+: clockdomain: remove the obsolete clkdm_xlate_address API
ARM: OMAP2+: hwmod: fix clkctrl address translation logic
ARM: OMAP4: CMINST: add support for translating clkctrl addresses
ARM: OMAP2+: CM: add support for getting phys address for a clkctrl register
Arnd Bergmann [Thu, 21 Dec 2017 16:04:47 +0000 (17:04 +0100)]
Merge tag 'bk3' of https://github.com/sverdlin/ep93xx into next/soc
Pull "ARM: ep93xx: ts72xx: Add support for BK3 board" from Alexander Sverdlin:
This patch series adds support for Liebherr's BK3 board, being
a derivative of TS72XX design.
* tag 'bk3' of https://github.com/sverdlin/ep93xx:
ARM: ep93xx: ts72xx: Add support for BK3 board - ts72xx derivative
ARM: ep93xx: ts72xx: cosmetic: Add some description to ts72xx code
ARM: ep93xx: ts72xx: Rewrite ts72xx_register_flash() to accept parameters
ARM: ep93xx: ts72xx: Provide include guards for ts72xx.h file
Dmitry Osipenko [Thu, 19 Oct 2017 22:08:04 +0000 (01:08 +0300)]
soc/tegra: fuse: Explicitly request DMA channel from APB DMA driver
Currently fuse driver requests DMA channel from an arbitrary DMA device,
it is not a problem since there is only one DMA provider for Tegra20 yet,
but it may become troublesome if another provider will appear.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Dmitry Osipenko [Thu, 19 Oct 2017 22:08:03 +0000 (01:08 +0300)]
soc/tegra: fuse: Fix reading registers using DMA on Tegra20
FUSE driver doesn't configure DMA channel properly, because of it DMA
transfer is never issued and tegra20_fuse_read() always return 0x0.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Keiji Hayashibara [Thu, 30 Nov 2017 01:26:55 +0000 (10:26 +0900)]
arm64: defconfig: enable CONFIG_UNIPHIER_EFUSE
Enable the efuse driver for UniPhier SoC
Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Linus Walleij [Thu, 21 Dec 2017 11:56:38 +0000 (12:56 +0100)]
MAINTAINERS: Add self as extended maintainer for a slew of files
Take over sole maintenance of Nomadik, U300 and Ux500. Since all are
Device Tree converted and using standard format drivers this is not
burdensome. Alessandro is not working on this platform any more.
Let's use one single git tree for all of them and combine the
MAINTAINERS entries into one.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Alessandro Rubini <rubini@unipv.it>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 21 Dec 2017 15:17:59 +0000 (16:17 +0100)]
Merge tag 'renesas-soc-for-v4.16' of ssh://gitolite./linux/kernel/git/horms/renesas into next/soc
Pull "Renesas ARM Based SoC Updates for v4.16" from Simon Horman:
* Identify R-Car M3-W ES1.1
Geert Uytterhoeven says "The Product Register of R-Car M3-W ES1.1
incorrectly identifies the SoC revision as ES2.0. Add a workaround to
fix this."
It is my understanding that this is likely to be forwards-compatibile.
* tag 'renesas-soc-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: Identify R-Car M3-W ES1.1
Amit Kucheria [Mon, 6 Nov 2017 07:08:13 +0000 (12:38 +0530)]
arm64: defconfig: enable new trigger modes for leds
Most development boards and devices have one or more LEDs. It is useful
during debugging if they can be wired to show different behaviours such as
disk or cpu activity or a load-average dependent heartbeat. Enable panic
and disk activity triggers so they can be tied to LED activity during
debugging as well.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Matthias Brugger [Thu, 21 Dec 2017 10:49:33 +0000 (11:49 +0100)]
Merge remote-tracking branch 'mainline-kernel/v4.15-next/pdids' into v4.15-next/soc
weiyi.lu@mediatek.com [Tue, 28 Nov 2017 07:28:20 +0000 (15:28 +0800)]
soc: mediatek: add MT2712 scpsys support
add scpsys driver for MT2712
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
weiyi.lu@mediatek.com [Tue, 28 Nov 2017 07:28:19 +0000 (15:28 +0800)]
soc: mediatek: add dependent clock jpgdec/audio for scpsys
There are dependent clock jpgdec/audio in scpsys on MT2712,
and will exist three dependent clocks on MT2712 VDEC.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
weiyi.lu@mediatek.com [Tue, 28 Nov 2017 07:28:18 +0000 (15:28 +0800)]
soc: mediatek: extend bus protection API
MT2712 add "set/clear" bus control register to each control register set
instead of providing only one "enable" control register, we could avoid
the read-modify-write racing by declaring "bus_prot_reg_update" as "false"
in scp_soc_data or declaring as "true" to use the legacy update method.
By improving the mtk-infracfg bus protection implementation to
support set/clear bus protection control method by IC configuration.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
weiyi.lu@mediatek.com [Tue, 28 Nov 2017 07:28:17 +0000 (15:28 +0800)]
dt-bindings: soc: add MT2712 power dt-bindings
Add power dt-bindings for MT2712.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Sean Wang [Mon, 18 Dec 2017 09:39:19 +0000 (17:39 +0800)]
ARM: mediatek: use more generic prompts for SoCs with ARMv7
Supported MediaTek SoCs with ARMv7 are not limited within MT65xx or MT81xx
and thus use more generic words to prompt users as the other vendors
usually use.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Linus Torvalds [Mon, 18 Dec 2017 02:59:59 +0000 (18:59 -0800)]
Linux 4.15-rc4
Kees Cook [Tue, 12 Dec 2017 19:28:38 +0000 (11:28 -0800)]
Revert "exec: avoid RLIMIT_STACK races with prlimit()"
This reverts commit
04e35f4495dd560db30c25efca4eecae8ec8c375.
SELinux runs with secureexec for all non-"noatsecure" domain transitions,
which means lots of processes end up hitting the stack hard-limit change
that was introduced in order to fix a race with prlimit(). That race fix
will need to be redesigned.
Reported-by: Laura Abbott <labbott@redhat.com>
Reported-by: Tomáš Trnka <trnka@scm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 17 Dec 2017 21:57:08 +0000 (13:57 -0800)]
Merge branch 'WIP.x86-pti.base-for-linus' of git://git./linux/kernel/git/tip/tip
Pull Page Table Isolation (PTI) v4.14 backporting base tree from Ingo Molnar:
"This tree contains the v4.14 PTI backport preparatory tree, which
consists of four merges of upstream trees and 7 cherry-picked commits,
which the upcoming PTI work depends on"
NOTE! The resulting tree is exactly the same as the original base tree
(ie the diff between this commit and its immediate first parent is
empty).
The only reason for this merge is literally to have a common point for
the actual PTI changes so that the commits can be shared in both the
4.15 and 4.14 trees.
* 'WIP.x86-pti.base-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow
locking/barriers: Convert users of lockless_dereference() to READ_ONCE()
locking/barriers: Add implicit smp_read_barrier_depends() to READ_ONCE()
bpf: fix build issues on um due to mising bpf_perf_event.h
perf/x86: Enable free running PEBS for REGS_USER/INTR
x86: Make X86_BUG_FXSAVE_LEAK detectable in CPUID on AMD
x86/cpufeature: Add User-Mode Instruction Prevention definitions
Linus Torvalds [Sun, 17 Dec 2017 21:54:31 +0000 (13:54 -0800)]
Merge branch 'WIP.x86-pti.base.prep-for-linus' of git://git./linux/kernel/git/tip/tip
Pull Page Table Isolation (PTI) preparatory tree from Ingo Molnar:
"This does a rename to free up linux/pti.h to be used by the upcoming
page table isolation feature"
* 'WIP.x86-pti.base.prep-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
drivers/misc/intel/pti: Rename the header file to free up the namespace
Linus Torvalds [Sun, 17 Dec 2017 21:48:50 +0000 (13:48 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single bugfix which prevents arbitrary sigev_notify values in
posix-timers"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-timer: Properly check sigevent->sigev_notify
Linus Torvalds [Sun, 17 Dec 2017 21:28:49 +0000 (13:28 -0800)]
Merge tag 'dmaengine-fix-4.15-rc4' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"This time consisting of fixes in a bunch of drivers and the dmatest
module:
- Fix for disable clk on error path in fsl-edma driver
- Disable clk fail fix in jz4740 driver
- Fix long pending bug in dmatest driver for dangling pointer
- Fix potential NULL pointer dereference in at_hdmac driver
- Error handling path in ioat driver"
* tag 'dmaengine-fix-4.15-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: fsl-edma: disable clks on all error paths
dmaengine: jz4740: disable/unprepare clk if probe fails
dmaengine: dmatest: move callback wait queue to thread context
dmaengine: at_hdmac: fix potential NULL pointer dereference in atc_prep_dma_interleaved
dmaengine: ioat: Fix error handling path
Arnd Bergmann [Fri, 10 Nov 2017 14:57:21 +0000 (15:57 +0100)]
cramfs: fix MTD dependency
With CONFIG_MTD=m and CONFIG_CRAMFS=y, we now get a link failure:
fs/cramfs/inode.o: In function `cramfs_mount': inode.c:(.text+0x220): undefined reference to `mount_mtd'
fs/cramfs/inode.o: In function `cramfs_mtd_fill_super':
inode.c:(.text+0x6d8): undefined reference to `mtd_point'
inode.c:(.text+0xae4): undefined reference to `mtd_unpoint'
This adds a more specific Kconfig dependency to avoid the broken
configuration.
Alternatively we could make CRAMFS itself depend on "MTD || !MTD" with a
similar result.
Fixes:
99c18ce580c6 ("cramfs: direct memory access support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 17 Dec 2017 20:18:35 +0000 (12:18 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"The alloc_super() one is a regression in this merge window, lazytime
thing is older..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Handle lazytime in do_mount()
alloc_super(): do ->s_umount initialization earlier
Linus Torvalds [Sun, 17 Dec 2017 20:14:33 +0000 (12:14 -0800)]
Merge tag 'ext4_for_stable' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a regression which caused us to fail to interpret symlinks in very
ancient ext3 file system images.
Also fix two xfstests failures, one of which could cause an OOPS, plus
an additional bug fix caught by fuzz testing"
* tag 'ext4_for_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix crash when a directory's i_size is too small
ext4: add missing error check in __ext4_new_inode()
ext4: fix fdatasync(2) after fallocate(2) operation
ext4: support fast symlinks from ext3 file systems
Andrey Ryabinin [Thu, 16 Nov 2017 01:36:35 +0000 (17:36 -0800)]
x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow
[ Note, this is a Git cherry-pick of the following commit:
d17a1d97dc20: ("x86/mm/kasan: don't use vmemmap_populate() to initialize shadow")
... for easier x86 PTI code testing and back-porting. ]
The KASAN shadow is currently mapped using vmemmap_populate() since that
provides a semi-convenient way to map pages into init_top_pgt. However,
since that no longer zeroes the mapped pages, it is not suitable for
KASAN, which requires zeroed shadow memory.
Add kasan_populate_shadow() interface and use it instead of
vmemmap_populate(). Besides, this allows us to take advantage of
gigantic pages and use them to populate the shadow, which should save us
some memory wasted on page tables and reduce TLB pressure.
Link: http://lkml.kernel.org/r/20171103185147.2688-2-pasha.tatashin@oracle.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Bob Picco <bob.picco@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Will Deacon [Tue, 24 Oct 2017 10:22:48 +0000 (11:22 +0100)]
locking/barriers: Convert users of lockless_dereference() to READ_ONCE()
[ Note, this is a Git cherry-pick of the following commit:
506458efaf15 ("locking/barriers: Convert users of lockless_dereference() to READ_ONCE()")
... for easier x86 PTI code testing and back-porting. ]
READ_ONCE() now has an implicit smp_read_barrier_depends() call, so it
can be used instead of lockless_dereference() without any change in
semantics.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1508840570-22169-4-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Will Deacon [Tue, 24 Oct 2017 10:22:47 +0000 (11:22 +0100)]
locking/barriers: Add implicit smp_read_barrier_depends() to READ_ONCE()
[ Note, this is a Git cherry-pick of the following commit:
76ebbe78f739 ("locking/barriers: Add implicit smp_read_barrier_depends() to READ_ONCE()")
... for easier x86 PTI code testing and back-porting. ]
In preparation for the removal of lockless_dereference(), which is the
same as READ_ONCE() on all architectures other than Alpha, add an
implicit smp_read_barrier_depends() to READ_ONCE() so that it can be
used to head dependency chains on all architectures.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1508840570-22169-3-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Daniel Borkmann [Tue, 12 Dec 2017 01:25:31 +0000 (02:25 +0100)]
bpf: fix build issues on um due to mising bpf_perf_event.h
[ Note, this is a Git cherry-pick of the following commit:
a23f06f06dbe ("bpf: fix build issues on um due to mising bpf_perf_event.h")
... for easier x86 PTI code testing and back-porting. ]
Since
c895f6f703ad ("bpf: correct broken uapi for
BPF_PROG_TYPE_PERF_EVENT program type") um (uml) won't build
on i386 or x86_64:
[...]
CC init/main.o
In file included from ../include/linux/perf_event.h:18:0,
from ../include/linux/trace_events.h:10,
from ../include/trace/syscall.h:7,
from ../include/linux/syscalls.h:82,
from ../init/main.c:20:
../include/uapi/linux/bpf_perf_event.h:11:32: fatal error:
asm/bpf_perf_event.h: No such file or directory #include
<asm/bpf_perf_event.h>
[...]
Lets add missing bpf_perf_event.h also to um arch. This seems
to be the only one still missing.
Fixes:
c895f6f703ad ("bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Richard Weinberger <richard@sigma-star.at>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Richard Weinberger <richard@sigma-star.at>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andi Kleen [Thu, 31 Aug 2017 21:46:30 +0000 (14:46 -0700)]
perf/x86: Enable free running PEBS for REGS_USER/INTR
[ Note, this is a Git cherry-pick of the following commit:
a47ba4d77e12 ("perf/x86: Enable free running PEBS for REGS_USER/INTR")
... for easier x86 PTI code testing and back-porting. ]
Currently free running PEBS is disabled when user or interrupt
registers are requested. Most of the registers are actually
available in the PEBS record and can be supported.
So we just need to check for the supported registers and then
allow it: it is all except for the segment register.
For user registers this only works when the counter is limited
to ring 3 only, so this also needs to be checked.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170831214630.21892-1-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rudolf Marek [Tue, 28 Nov 2017 21:01:06 +0000 (22:01 +0100)]
x86: Make X86_BUG_FXSAVE_LEAK detectable in CPUID on AMD
[ Note, this is a Git cherry-pick of the following commit:
2b67799bdf25 ("x86: Make X86_BUG_FXSAVE_LEAK detectable in CPUID on AMD")
... for easier x86 PTI code testing and back-porting. ]
The latest AMD AMD64 Architecture Programmer's Manual
adds a CPUID feature XSaveErPtr (CPUID_Fn80000008_EBX[2]).
If this feature is set, the FXSAVE, XSAVE, FXSAVEOPT, XSAVEC, XSAVES
/ FXRSTOR, XRSTOR, XRSTORS always save/restore error pointers,
thus making the X86_BUG_FXSAVE_LEAK workaround obsolete on such CPUs.
Signed-Off-By: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: https://lkml.kernel.org/r/bdcebe90-62c5-1f05-083c-eba7f08b2540@assembler.cz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ricardo Neri [Mon, 6 Nov 2017 02:27:51 +0000 (18:27 -0800)]
x86/cpufeature: Add User-Mode Instruction Prevention definitions
[ Note, this is a Git cherry-pick of the following commit: (limited to the cpufeatures.h file)
3522c2a6a4f3 ("x86/cpufeature: Add User-Mode Instruction Prevention definitions")
... for easier x86 PTI code testing and back-porting. ]
User-Mode Instruction Prevention is a security feature present in new
Intel processors that, when set, prevents the execution of a subset of
instructions if such instructions are executed in user mode (CPL > 0).
Attempting to execute such instructions causes a general protection
exception.
The subset of instructions comprises:
* SGDT - Store Global Descriptor Table
* SIDT - Store Interrupt Descriptor Table
* SLDT - Store Local Descriptor Table
* SMSW - Store Machine Status Word
* STR - Store Task Register
This feature is also added to the list of disabled-features to allow
a cleaner handling of build-time configuration.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chen Yucong <slaoub@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: ricardo.neri@intel.com
Link: http://lkml.kernel.org/r/1509935277-22138-7-git-send-email-ricardo.neri-calderon@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Fri, 1 Dec 2017 09:34:04 +0000 (10:34 +0100)]
Merge commit 'upstream-x86-virt' into WIP.x86/mm
Merge a minimal set of virt cleanups, for a base for the MM isolation patches.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Sun, 17 Dec 2017 12:09:31 +0000 (13:09 +0100)]
Merge branch 'upstream-acpi-fixes' into WIP.x86/pti.base
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Sun, 17 Dec 2017 12:04:28 +0000 (13:04 +0100)]
Merge branch 'upstream-x86-selftests' into WIP.x86/pti.base
Conflicts:
arch/x86/kernel/cpu/Makefile
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Fri, 1 Dec 2017 09:32:48 +0000 (10:32 +0100)]
Merge commit 'upstream-x86-entry' into WIP.x86/mm
Pull in a minimal set of v4.15 entry code changes, for a base for the MM isolation patches.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Tue, 5 Dec 2017 13:14:47 +0000 (14:14 +0100)]
drivers/misc/intel/pti: Rename the header file to free up the namespace
We'd like to use the 'PTI' acronym for 'Page Table Isolation' - free up the
namespace by renaming the <linux/pti.h> driver header to <linux/intel-pti.h>.
(Also standardize the header guard name while at it.)
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: J Freyensee <james_p_freyensee@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Sat, 16 Dec 2017 21:43:08 +0000 (13:43 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"More fixes from testing done on the rc kernel, including more SELinux
testing. Looking forward, lockdep found regression today in ipoib
which is still being fixed.
Summary:
- Fix for SELinux on the umad SMI path. Some old hardware does not
fill the PKey properly exposing another bug in the newer SELinux
code.
- Check the input port as we can exceed array bounds from this user
supplied value
- Users are unable to use the hash field support as they want due to
incorrect checks on the field restrictions, correct that so the
feature works as intended
- User triggerable oops in the NETLINK_RDMA handler
- cxgb4 driver fix for a bad interaction with CQ flushing in iser
caused by patches in this merge window, and bad CQ flushing during
normal close.
- Unbalanced memalloc_noio in ipoib in an error path"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/ipoib: Restore MM behavior in case of tx_ring allocation failure
iw_cxgb4: only insert drain cqes if wq is flushed
iw_cxgb4: only clear the ARMED bit if a notification is needed
RDMA/netlink: Fix general protection fault
IB/mlx4: Fix RSS hash fields restrictions
IB/core: Don't enforce PKey security on SMI MADs
IB/core: Bound check alternate path port number
Linus Torvalds [Sat, 16 Dec 2017 21:34:38 +0000 (13:34 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two bugfixes for the AT24 I2C eeprom driver and some minor corrections
for I2C bus drivers"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: piix4: Fix port number check on release
i2c: stm32: Fix copyrights
i2c-cht-wc: constify platform_device_id
eeprom: at24: change nvmem stride to 1
eeprom: at24: fix I2C device selection for runtime PM
Linus Torvalds [Sat, 16 Dec 2017 21:12:53 +0000 (13:12 -0800)]
Merge tag 'nfs-for-4.15-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"This has two stable bugfixes, one to fix a BUG_ON() when
nfs_commit_inode() is called with no outstanding commit requests and
another to fix a race in the SUNRPC receive codepath.
Additionally, there are also fixes for an NFS client deadlock and an
xprtrdma performance regression.
Summary:
Stable bugfixes:
- NFS: Avoid a BUG_ON() in nfs_commit_inode() by not waiting for a
commit in the case that there were no commit requests.
- SUNRPC: Fix a race in the receive code path
Other fixes:
- NFS: Fix a deadlock in nfs client initialization
- xprtrdma: Fix a performance regression for small IOs"
* tag 'nfs-for-4.15-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: Fix a race in the receive code path
nfs: don't wait on commit in nfs_commit_inode() if there were no commit requests
xprtrdma: Spread reply processing over more CPUs
nfs: fix a deadlock in nfs client initialization
Linus Torvalds [Sat, 16 Dec 2017 02:53:22 +0000 (18:53 -0800)]
Revert "mm: replace p??_write with pte_access_permitted in fault + gup paths"
This reverts commits
5c9d2d5c269c,
c7da82b894e9, and
e7fe7b5cae90.
We'll probably need to revisit this, but basically we should not
complicate the get_user_pages_fast() case, and checking the actual page
table protection key bits will require more care anyway, since the
protection keys depend on the exact state of the VM in question.
Particularly when doing a "remote" page lookup (ie in somebody elses VM,
not your own), you need to be much more careful than this was. Dave
Hansen says:
"So, the underlying bug here is that we now a get_user_pages_remote()
and then go ahead and do the p*_access_permitted() checks against the
current PKRU. This was introduced recently with the addition of the
new p??_access_permitted() calls.
We have checks in the VMA path for the "remote" gups and we avoid
consulting PKRU for them. This got missed in the pkeys selftests
because I did a ptrace read, but not a *write*. I also didn't
explicitly test it against something where a COW needed to be done"
It's also not entirely clear that it makes sense to check the protection
key bits at this level at all. But one possible eventual solution is to
make the get_user_pages_fast() case just abort if it sees protection key
bits set, which makes us fall back to the regular get_user_pages() case,
which then has a vma and can do the check there if we want to.
We'll see.
Somewhat related to this all: what we _do_ want to do some day is to
check the PAGE_USER bit - it should obviously always be set for user
pages, but it would be a good check to have back. Because we have no
generic way to test for it, we lost it as part of moving over from the
architecture-specific x86 GUP implementation to the generic one in
commit
e585513b76f7 ("x86/mm/gup: Switch GUP to the generic
get_user_page_fast() implementation").
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 15 Dec 2017 21:08:37 +0000 (13:08 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Clamp timeouts to INT_MAX in conntrack, from Jay Elliot.
2) Fix broken UAPI for BPF_PROG_TYPE_PERF_EVENT, from Hendrik
Brueckner.
3) Fix locking in ieee80211_sta_tear_down_BA_sessions, from Johannes
Berg.
4) Add missing barriers to ptr_ring, from Michael S. Tsirkin.
5) Don't advertise gigabit in sh_eth when not available, from Thomas
Petazzoni.
6) Check network namespace when delivering to netlink taps, from Kevin
Cernekee.
7) Kill a race in raw_sendmsg(), from Mohamed Ghannam.
8) Use correct address in TCP md5 lookups when replying to an incoming
segment, from Christoph Paasch.
9) Add schedule points to BPF map alloc/free, from Eric Dumazet.
10) Don't allow silly mtu values to be used in ipv4/ipv6 multicast, also
from Eric Dumazet.
11) Fix SKB leak in tipc, from Jon Maloy.
12) Disable MAC learning on OVS ports of mlxsw, from Yuval Mintz.
13) SKB leak fix in skB_complete_tx_timestamp(), from Willem de Bruijn.
14) Add some new qmi_wwan device IDs, from Daniele Palmas.
15) Fix static key imbalance in ingress qdisc, from Jiri Pirko.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
net: qcom/emac: Reduce timeout for mdio read/write
net: sched: fix static key imbalance in case of ingress/clsact_init error
net: sched: fix clsact init error path
ip_gre: fix wrong return value of erspan_rcv
net: usb: qmi_wwan: add Telit ME910 PID 0x1101 support
pkt_sched: Remove TC_RED_OFFLOADED from uapi
net: sched: Move to new offload indication in RED
net: sched: Add TCA_HW_OFFLOAD
net: aquantia: Increment driver version
net: aquantia: Fix typo in ethtool statistics names
net: aquantia: Update hw counters on hw init
net: aquantia: Improve link state and statistics check interval callback
net: aquantia: Fill in multicast counter in ndev stats from hardware
net: aquantia: Fill ndev stat couters from hardware
net: aquantia: Extend stat counters to 64bit values
net: aquantia: Fix hardware DMA stream overload on large MRRS
net: aquantia: Fix actual speed capabilities reporting
sock: free skb in skb_complete_tx_timestamp on error
s390/qeth: update takeover IPs after configuration change
s390/qeth: lock IP table while applying takeover changes
...
Linus Torvalds [Fri, 15 Dec 2017 21:03:25 +0000 (13:03 -0800)]
Merge tag 'usb-4.15-rc4' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB fixes for 4.15-rc4.
There is the usual handful gadget/dwc2/dwc3 fixes as always, for
reported issues. But the most important things in here is the core fix
from Alan Stern to resolve a nasty security bug (my first attempt is
reverted, Alan's was much cleaner), as well as a number of usbip fixes
from Shuah Khan to resolve those reported security issues.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: core: prevent malicious bNumInterfaces overflow
Revert "USB: core: only clean up what we allocated"
USB: core: only clean up what we allocated
Revert "usb: gadget: allow to enable legacy drivers without USB_ETH"
usb: gadget: webcam: fix V4L2 Kconfig dependency
usb: dwc2: Fix TxFIFOn sizes and total TxFIFO size issues
usb: dwc3: gadget: Fix PCM1 for ISOC EP with ep->mult less than 3
usb: dwc3: of-simple: set dev_pm_ops
usb: dwc3: of-simple: fix missing clk_disable_unprepare
usb: dwc3: gadget: Wait longer for controller to end command processing
usb: xhci: fix TDS for MTK xHCI1.1
xhci: Don't add a virt_dev to the devs array before it's fully allocated
usbip: fix stub_send_ret_submit() vulnerability to null transfer_buffer
usbip: prevent vhci_hcd driver from leaking a socket pointer address
usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input
usbip: fix stub_rx: get_pipe() to validate endpoint number
tools/usbip: fixes potential (minor) "buffer overflow" (detected on recent gcc with -Werror)
USB: uas and storage: Add US_FL_BROKEN_FUA for another JMicron JMS567 ID
usb: musb: da8xx: fix babble condition handling
Linus Torvalds [Fri, 15 Dec 2017 20:59:48 +0000 (12:59 -0800)]
Merge tag 'staging-4.15-rc4' of git://git./linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are some small staging driver fixes for 4.15-rc4.
One patch for the ccree driver to prevent an unitialized value from
being returned to a caller, and the other fixes a logic error in the
pi433 driver"
* tag 'staging-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: pi433: Fixes issue with bit shift in rf69_get_modulation
staging: ccree: Uninitialized return in ssi_ahash_import()
Linus Torvalds [Fri, 15 Dec 2017 20:56:23 +0000 (12:56 -0800)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio regression fixes from Michael Tsirkin:
"Fixes two issues in the latest kernel"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_mmio: fix devm cleanup
ptr_ring: fix up after recent ptr_ring changes
Linus Torvalds [Fri, 15 Dec 2017 20:53:37 +0000 (12:53 -0800)]
Merge tag 'for-4.15/dm-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- fix a particularly nasty DM core bug in a 4.15 refcount_t conversion.
- fix various targets to dm_register_target after module __init
resources created; otherwise racing lvm2 commands could result in a
NULL pointer during initialization of associated DM kernel module.
- fix regression in bio-based DM multipath queue_if_no_path handling.
- fix DM bufio's shrinker to reclaim more than one buffer per scan.
* tag 'for-4.15/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm bufio: fix shrinker scans when (nr_to_scan < retain_target)
dm mpath: fix bio-based multipath queue_if_no_path handling
dm: fix various targets to dm_register_target after module __init resources created
dm table: fix regression from improper dm_dev_internal.count refcount_t conversion
Linus Torvalds [Fri, 15 Dec 2017 20:51:42 +0000 (12:51 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The most important one is the bfa fix because it's easy to oops the
kernel with this driver (this includes the commit that corrects the
compiler warning in the original), a regression in the new timespec
conversion in aacraid and a regression in the Fibre Channel ELS
handling patch.
The other three are a theoretical problem with termination in the
vendor/host matching code and a use after free in lpfc.
The additional patches are a fix for an I/O hang in the mq code under
certain circumstances and a rare oops in some debugging code"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: Fix a scsi_show_rq() NULL pointer dereference
scsi: MAINTAINERS: change FCoE list to linux-scsi
scsi: libsas: fix length error in sas_smp_handler()
scsi: bfa: fix type conversion warning
scsi: core: run queue if SCSI device queue isn't ready and queue is idle
scsi: scsi_devinfo: cleanly zero-pad devinfo strings
scsi: scsi_devinfo: handle non-terminated strings
scsi: bfa: fix access to bfad_im_port_s
scsi: aacraid: address UBSAN warning regression
scsi: libfc: fix ELS request handling
scsi: lpfc: Use after free in lpfc_rq_buf_free()
Linus Torvalds [Fri, 15 Dec 2017 20:49:54 +0000 (12:49 -0800)]
Merge tag 'mmc-v4.15-rc2' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"A couple of MMC fixes:
- fix use of uninitialized drv_typ variable
- apply NO_CMD23 quirk to some specific SD cards to make them work"
* tag 'mmc-v4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: apply NO_CMD23 quirk to some specific cards
mmc: core: properly init drv_type
Linus Torvalds [Fri, 15 Dec 2017 20:48:27 +0000 (12:48 -0800)]
Merge tag 'ceph-for-4.15-rc4' of git://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"CephFS inode trimming fix from Zheng, marked for stable"
* tag 'ceph-for-4.15-rc4' of git://github.com/ceph/ceph-client:
ceph: drop negative child dentries before try pruning inode's alias
Linus Torvalds [Fri, 15 Dec 2017 20:46:48 +0000 (12:46 -0800)]
Merge branch 'overlayfs-linus' of git://git./linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
- fix incomplete syncing of filesystem
- fix regression in readdir on ovl over 9p
- only follow redirects when needed
- misc fixes and cleanups
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fix overlay: warning prefix
ovl: Use PTR_ERR_OR_ZERO()
ovl: Sync upper dirty data when syncing overlayfs
ovl: update ctx->pos on impure dir iteration
ovl: Pass ovl_get_nlink() parameters in right order
ovl: don't follow redirects if redirect_dir=off
Hemanth Puranik [Fri, 15 Dec 2017 14:35:58 +0000 (20:05 +0530)]
net: qcom/emac: Reduce timeout for mdio read/write
Currently mdio read/write takes around ~115us as the timeout
between status check is set to 100us.
By reducing the timeout to 1us mdio read/write takes ~15us to
complete. This improves the link up event response.
Signed-off-by: Hemanth Puranik <hpuranik@codeaurora.org>
Acked-by: Timur Tabi <timur@codeaurora.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 15 Dec 2017 20:44:49 +0000 (12:44 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"There are some significant fixes in here for FP state corruption,
hardware access/dirty PTE corruption and an erratum workaround for the
Falkor CPU.
I'm hoping that things finally settle down now, but never say never...
Summary:
- Fix FPSIMD context switch regression introduced in -rc2
- Fix ABI break with SVE CPUID register reporting
- Fix use of uninitialised variable
- Fixes to hardware access/dirty management and sanity checking
- CPU erratum workaround for Falkor CPUs
- Fix reporting of writeable+executable mappings
- Fix signal reporting for RAS errors"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: fpsimd: Fix copying of FP state from signal frame into task struct
arm64/sve: Report SVE to userspace via CPUID only if supported
arm64: fix CONFIG_DEBUG_WX address reporting
arm64: fault: avoid send SIGBUS two times
arm64: hw_breakpoint: Use linux/uaccess.h instead of asm/uaccess.h
arm64: Add software workaround for Falkor erratum 1041
arm64: Define cputype macros for Falkor CPU
arm64: mm: Fix false positives in set_pte_at access/dirty race detection
arm64: mm: Fix pte_mkclean, pte_mkdirty semantics
arm64: Initialise high_memory global variable earlier
Jiri Pirko [Fri, 15 Dec 2017 11:40:13 +0000 (12:40 +0100)]
net: sched: fix static key imbalance in case of ingress/clsact_init error
Move static key increments to the beginning of the init function
so they pair 1:1 with decrements in ingress/clsact_destroy,
which is called in case ingress/clsact_init fails.
Fixes:
6529eaba33f0 ("net: sched: introduce tcf block infractructure")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Fri, 15 Dec 2017 11:40:12 +0000 (12:40 +0100)]
net: sched: fix clsact init error path
Since in qdisc_create, the destroy op is called when init fails, we
don't do cleanup in init and leave it up to destroy.
This fixes use-after-free when trying to put already freed block.
Fixes:
6e40cf2d4dee ("net: sched: use extended variants of block_get/put in ingress and clsact qdiscs")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 15 Dec 2017 20:14:33 +0000 (12:14 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- fix the s2ram regression related to confusion around segment
register restoration, plus related cleanups that make the code more
robust
- a guess-unwinder Kconfig dependency fix
- an isoimage build target fix for certain tool chain combinations
- instruction decoder opcode map fixes+updates, and the syncing of
the kernel decoder headers to the objtool headers
- a kmmio tracing fix
- two 5-level paging related fixes
- a topology enumeration fix on certain SMP systems"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Resync objtool's instruction decoder source code copy with the kernel's latest version
x86/decoder: Fix and update the opcodes map
x86/power: Make restore_processor_context() sane
x86/power/32: Move SYSENTER MSR restoration to fix_processor_context()
x86/power/64: Use struct desc_ptr for the IDT in struct saved_context
x86/unwinder/guess: Prevent using CONFIG_UNWINDER_GUESS=y with CONFIG_STACKDEPOT=y
x86/build: Don't verify mtools configuration file for isoimage
x86/mm/kmmio: Fix mmiotrace for page unaligned addresses
x86/boot/compressed/64: Print error if 5-level paging is not supported
x86/boot/compressed/64: Detect and handle 5-level paging at boot-time
x86/smpboot: Do not use smp_num_siblings in __max_logical_packages calculation
Linus Torvalds [Fri, 15 Dec 2017 19:44:59 +0000 (11:44 -0800)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fixes from Ingo Molnar:
"Misc fixes:
- Fix a S390 boot hang that was caused by the lock-break logic.
Remove lock-break to begin with, as review suggested it was
unreasonably fragile and our confidence in its continued good
health is lower than our confidence in its removal.
- Remove the lockdep cross-release checking code for now, because of
unresolved false positive warnings. This should make lockdep work
well everywhere again.
- Get rid of the final (and single) ACCESS_ONCE() straggler and
remove the API from v4.15.
- Fix a liblockdep build warning"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/lib/lockdep: Add missing declaration of 'pr_cont()'
checkpatch: Remove ACCESS_ONCE() warning
compiler.h: Remove ACCESS_ONCE()
tools/include: Remove ACCESS_ONCE()
tools/perf: Convert ACCESS_ONCE() to READ_ONCE()
locking/lockdep: Remove the cross-release locking checks
locking/core: Remove break_lock field when CONFIG_GENERIC_LOCKBREAK=y
locking/core: Fix deadlock during boot on systems with GENERIC_LOCKBREAK
Linus Torvalds [Fri, 15 Dec 2017 19:40:24 +0000 (11:40 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Two fixes: a crash fix for an ARM SoC platform, and kernel-doc
warnings fixes"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt: Do not pull from current CPU if only one CPU to pull
sched/core: Fix kernel-doc warnings after code movement
Linus Torvalds [Fri, 15 Dec 2017 19:36:20 +0000 (11:36 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf tooling fix from Ingo Molnar:
"Synchronize kernel <-> tooling headers to resolve two build warnings
in the perf build"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/headers: Synchronize kernel <-> tooling headers
Linus Torvalds [Fri, 15 Dec 2017 19:34:29 +0000 (11:34 -0800)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull early_ioremap fix from Ingo Molnar:
"A boot hang fix when the EFI earlyprintk driver is enabled"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mm/early_ioremap: Fix boot hang with earlyprintk=efi,keep
Linus Torvalds [Fri, 15 Dec 2017 19:32:09 +0000 (11:32 -0800)]
Merge tag 'for-linus-4.15-rc4-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two minor fixes for running as Xen dom0:
- when built as 32 bit kernel on large machines the Xen LAPIC
emulation should report a rather modern LAPIC in order to support
enough APIC-Ids
- The Xen LAPIC emulation is needed for dom0 only, so build it only
for kernels supporting to run as Xen dom0"
* tag 'for-linus-4.15-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: XEN_ACPI_PROCESSOR is Dom0-only
x86/Xen: don't report ancient LAPIC version
Trond Myklebust [Fri, 15 Dec 2017 02:24:08 +0000 (21:24 -0500)]
SUNRPC: Fix a race in the receive code path
We must ensure that the call to rpc_sleep_on() in xprt_transmit() cannot
race with the call to xprt_complete_rqst().
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=317
Fixes:
ce7c252a8c74 ("SUNRPC: Add a separate spinlock to protect..")
Cc: stable@vger.kernel.org # 4.14+
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Scott Mayhew [Fri, 8 Dec 2017 21:00:12 +0000 (16:00 -0500)]
nfs: don't wait on commit in nfs_commit_inode() if there were no commit requests
If there were no commit requests, then nfs_commit_inode() should not
wait on the commit or mark the inode dirty, otherwise the following
BUG_ON can be triggered:
[ 1917.130762] kernel BUG at fs/inode.c:578!
[ 1917.130766] Oops: Exception in kernel mode, sig: 5 [#1]
[ 1917.130768] SMP NR_CPUS=2048 NUMA pSeries
[ 1917.130772] Modules linked in: iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi blocklayoutdriver rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache sunrpc sg nx_crypto pseries_rng ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_common ibmvscsi scsi_transport_srp ibmveth scsi_tgt dm_mirror dm_region_hash dm_log dm_mod
[ 1917.130805] CPU: 2 PID: 14923 Comm: umount.nfs4 Tainted: G ------------ T 3.10.0-768.el7.ppc64 #1
[ 1917.130810] task:
c0000005ecd88040 ti:
c00000004cea0000 task.ti:
c00000004cea0000
[ 1917.130813] NIP:
c000000000354178 LR:
c000000000354160 CTR:
c00000000012db80
[ 1917.130816] REGS:
c00000004cea3720 TRAP: 0700 Tainted: G ------------ T (3.10.0-768.el7.ppc64)
[ 1917.130820] MSR:
8000000100029032 <SF,EE,ME,IR,DR,RI> CR:
22002822 XER:
20000000
[ 1917.130828] CFAR:
c00000000011f594 SOFTE: 1
GPR00:
c000000000354160 c00000004cea39a0 c0000000014c4700 c0000000018cc750
GPR04:
000000000000c750 80c0000000000000 0600000000000000 04eeb76bea749a03
GPR08:
0000000000000034 c0000000018cc758 0000000000000001 d000000005e619e8
GPR12:
c00000000012db80 c000000007b31200 0000000000000000 0000000000000000
GPR16:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24:
0000000000000000 c000000000dfc3ec 0000000000000000 c0000005eefc02c0
GPR28:
d0000000079dbd50 c0000005b94a02c0 c0000005b94a0250 c0000005b94a01c8
[ 1917.130867] NIP [
c000000000354178] .evict+0x1c8/0x350
[ 1917.130871] LR [
c000000000354160] .evict+0x1b0/0x350
[ 1917.130873] Call Trace:
[ 1917.130876] [
c00000004cea39a0] [
c000000000354160] .evict+0x1b0/0x350 (unreliable)
[ 1917.130880] [
c00000004cea3a30] [
c0000000003558cc] .evict_inodes+0x13c/0x270
[ 1917.130884] [
c00000004cea3af0] [
c000000000327d20] .kill_anon_super+0x70/0x1e0
[ 1917.130896] [
c00000004cea3b80] [
d000000005e43e30] .nfs_kill_super+0x20/0x60 [nfs]
[ 1917.130900] [
c00000004cea3c00] [
c000000000328a20] .deactivate_locked_super+0xa0/0x1b0
[ 1917.130903] [
c00000004cea3c80] [
c00000000035ba54] .cleanup_mnt+0xd4/0x180
[ 1917.130907] [
c00000004cea3d10] [
c000000000119034] .task_work_run+0x114/0x150
[ 1917.130912] [
c00000004cea3db0] [
c00000000001ba6c] .do_notify_resume+0xcc/0x100
[ 1917.130916] [
c00000004cea3e30] [
c00000000000a7b0] .ret_from_except_lite+0x5c/0x60
[ 1917.130919] Instruction dump:
[ 1917.130921]
7fc3f378 486734b5 60000000 387f00a0 38800003 4bdcb365 60000000 e95f00a0
[ 1917.130927]
694a0060 7d4a0074 794ad182 694a0001 <
0b0a0000>
892d02a4 2f890000 40de0134
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Cc: stable@vger.kernel.org # 4.5+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Mon, 4 Dec 2017 19:04:04 +0000 (14:04 -0500)]
xprtrdma: Spread reply processing over more CPUs
Commit
d8f532d20ee4 ("xprtrdma: Invoke rpcrdma_reply_handler
directly from RECV completion") introduced a performance regression
for NFS I/O small enough to not need memory registration. In multi-
threaded benchmarks that generate primarily small I/O requests,
IOPS throughput is reduced by nearly a third. This patch restores
the previous level of throughput.
Because workqueues are typically BOUND (in particular ib_comp_wq,
nfsiod_workqueue, and rpciod_workqueue), NFS/RDMA workloads tend
to aggregate on the CPU that is handling Receive completions.
The usual approach to addressing this problem is to create a QP
and CQ for each CPU, and then schedule transactions on the QP
for the CPU where you want the transaction to complete. The
transaction then does not require an extra context switch during
completion to end up on the same CPU where the transaction was
started.
This approach doesn't work for the Linux NFS/RDMA client because
currently the Linux NFS client does not support multiple connections
per client-server pair, and the RDMA core API does not make it
straightforward for ULPs to determine which CPU is responsible for
handling Receive completions for a CQ.
So for the moment, record the CPU number in the rpcrdma_req before
the transport sends each RPC Call. Then during Receive completion,
queue the RPC completion on that same CPU.
Additionally, move all RPC completion processing to the deferred
handler so that even RPCs with simple small replies complete on
the CPU that sent the corresponding RPC Call.
Fixes:
d8f532d20ee4 ("xprtrdma: Invoke rpcrdma_reply_handler ...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Scott Mayhew [Tue, 5 Dec 2017 18:55:44 +0000 (13:55 -0500)]
nfs: fix a deadlock in nfs client initialization
The following deadlock can occur between a process waiting for a client
to initialize in while walking the client list during nfsv4 server trunking
detection and another process waiting for the nfs_clid_init_mutex so it
can initialize that client:
Process 1 Process 2
--------- ---------
spin_lock(&nn->nfs_client_lock);
list_add_tail(&CLIENTA->cl_share_link,
&nn->nfs_client_list);
spin_unlock(&nn->nfs_client_lock);
spin_lock(&nn->nfs_client_lock);
list_add_tail(&CLIENTB->cl_share_link,
&nn->nfs_client_list);
spin_unlock(&nn->nfs_client_lock);
mutex_lock(&nfs_clid_init_mutex);
nfs41_walk_client_list(clp, result, cred);
nfs_wait_client_init_complete(CLIENTA);
(waiting for nfs_clid_init_mutex)
Make sure nfs_match_client() only evaluates clients that have completed
initialization in order to prevent that deadlock.
This patch also fixes v4.0 trunking behavior by not marking the client
NFS_CS_READY until the clientid has been confirmed.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Haishuang Yan [Fri, 15 Dec 2017 02:46:16 +0000 (10:46 +0800)]
ip_gre: fix wrong return value of erspan_rcv
If pskb_may_pull return failed, return PACKET_REJECT instead of -ENOMEM.
Fixes:
84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN")
Cc: William Tu <u9012063@gmail.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniele Palmas [Thu, 14 Dec 2017 15:56:14 +0000 (16:56 +0100)]
net: usb: qmi_wwan: add Telit ME910 PID 0x1101 support
This patch adds support for Telit ME910 PID 0x1101.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Dec 2017 18:35:37 +0000 (13:35 -0500)]
Merge branch 'net-sched-Make-qdisc-offload-uapi-uniform'
Yuval Mintz says:
====================
net: sched: Make qdisc offload uapi uniform
Several qdiscs can already be offloaded to hardware, but there's an
inconsistecy in regard to the uapi through which they indicate such
an offload is taking place - indication is passed to the user via
TCA_OPTIONS where each qdisc retains private logic for setting it.
The recent addition of offloading to RED in
602f3baf2218 ("net_sch: red: Add offload ability to RED qdisc") caused
the addition of yet another uapi field for this purpose -
TC_RED_OFFLOADED.
For clarity and prevention of bloat in the uapi we want to eliminate
said added uapi, replacing it with a common mechanism that can be used
to reflect offload status of the various qdiscs.
The first patch introduces TCA_HW_OFFLOAD as the generic message meant
for this purpose. The second changes the current RED implementation into
setting the internal bits necessary for passing it, and the third removes
TC_RED_OFFLOADED as its no longer needed.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Thu, 14 Dec 2017 13:54:31 +0000 (15:54 +0200)]
pkt_sched: Remove TC_RED_OFFLOADED from uapi
Following the previous patch, RED is now using the new uniform uapi
for indicating it's offloaded. As a result, TC_RED_OFFLOADED is no
longer utilized by kernel and can be removed [as it's still not
part of any stable release].
Fixes:
602f3baf2218 ("net_sch: red: Add offload ability to RED qdisc")
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Thu, 14 Dec 2017 13:54:30 +0000 (15:54 +0200)]
net: sched: Move to new offload indication in RED
Let RED utilize the new internal flag, TCQ_F_OFFLOADED,
to mark a given qdisc as offloaded instead of using a dedicated
indication.
Also, change internal logic into looking at said flag when possible.
Fixes:
602f3baf2218 ("net_sch: red: Add offload ability to RED qdisc")
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Thu, 14 Dec 2017 13:54:29 +0000 (15:54 +0200)]
net: sched: Add TCA_HW_OFFLOAD
Qdiscs can be offloaded to HW, but current implementation isn't uniform.
Instead, qdiscs either pass information about offload status via their
TCA_OPTIONS or omit it altogether.
Introduce a new attribute - TCA_HW_OFFLOAD that would form a uniform
uAPI for the offloading status of qdiscs.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Dec 2017 17:46:43 +0000 (12:46 -0500)]
Merge branch 'aquantia-fixes'
Igor Russkikh says:
====================
net: aquantia: Atlantic driver 12/2017 updates
The patchset contains important hardware fix for machines with large MRRS
and couple of improvement in stats and capabilities reporting
patch v3:
- Fixed patch #7 after Andrew's finding. NIC level stats actually
have to be cleaned only on hw struct creation (and this is done
in kzalloc). On each hwinit we only have to reset link state
to make sure hw stats update will not increment nic stats during init.
patch v2:
- split into more detailed commits
Comment from David on wrong defines case will be submitted separately later
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 14 Dec 2017 09:34:48 +0000 (12:34 +0300)]
net: aquantia: Increment driver version
Add a suffix to distinguish kernel mainline version and aquantia releases
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 14 Dec 2017 09:34:47 +0000 (12:34 +0300)]
net: aquantia: Fix typo in ethtool statistics names
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 14 Dec 2017 09:34:46 +0000 (12:34 +0300)]
net: aquantia: Update hw counters on hw init
On very first start we should read out current HW counter values
to make diff based calculations later.
This also should be done each time NIC gets down/up or wakes up
after sleep state. We reset link state explicitly to prevent diffs
from being summed this first time.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 14 Dec 2017 09:34:45 +0000 (12:34 +0300)]
net: aquantia: Improve link state and statistics check interval callback
Reduce timeout from 2 secs to 1 sec. If link is down,
reduce it to 500msec. This speeds up link detection.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 14 Dec 2017 09:34:44 +0000 (12:34 +0300)]
net: aquantia: Fill in multicast counter in ndev stats from hardware
This metric comes from HW and is also diff-calculated, like other counters
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 14 Dec 2017 09:34:43 +0000 (12:34 +0300)]
net: aquantia: Fill ndev stat couters from hardware
Originally they were filled from ring sw counters.
These sometimes incorrectly calculate byte and packet amounts
when using LRO/LSO and jumboframes. Filling ndev counters from
hardware makes them precise.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 14 Dec 2017 09:34:42 +0000 (12:34 +0300)]
net: aquantia: Extend stat counters to 64bit values
Device hardware provides only 32bit counters. Using these directly
causes byte counters to overflow soon. A separate nic level structure
with 64 bit counters is now used to collect incrementally all the stats
and report these counters to ethtool stats and ndev stats.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 14 Dec 2017 09:34:41 +0000 (12:34 +0300)]
net: aquantia: Fix hardware DMA stream overload on large MRRS
Systems with large MRRS on device (2K, 4K) with high data rates and/or
large MTU, atlantic observes DMA packet buffer overflow. On some systems
that causes PCIe transaction errors, hardware NMIs or datapath freeze.
This patch
1) Limits MRRS from device side to 2K (thats maximum our hardware supports)
2) Limit maximum size of outstanding TX DMA data read requests. This makes
hardware buffers running fine.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Thu, 14 Dec 2017 09:34:40 +0000 (12:34 +0300)]
net: aquantia: Fix actual speed capabilities reporting
Different hardware device Ids correspond to different maximum speed
available. Extra checks were added for devices D108 and D109 to
remove unsupported speeds from these device capabilities list.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Wed, 13 Dec 2017 19:41:06 +0000 (14:41 -0500)]
sock: free skb in skb_complete_tx_timestamp on error
skb_complete_tx_timestamp must ingest the skb it is passed. Call
kfree_skb if the skb cannot be enqueued.
Fixes:
b245be1f4db1 ("net-timestamp: no-payload only sysctl")
Fixes:
9ac25fc06375 ("net: fix socket refcounting in skb_complete_tx_timestamp()")
Reported-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Dec 2017 16:29:44 +0000 (11:29 -0500)]
Merge branch 's390-fixes'
Julian Wiedmann says:
====================
s390/qeth: fixes 2017-12-13
some more patches for 4.15, that fix multiple issues with IP Takeover
configuration in qeth.
Please queue them up for stable kernels as well (4.9 and newer).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Wed, 13 Dec 2017 17:56:32 +0000 (18:56 +0100)]
s390/qeth: update takeover IPs after configuration change
Any modification to the takeover IP-ranges requires that we re-evaluate
which IP addresses are takeover-eligible. Otherwise we might do takeover
for some addresses when we no longer should, or vice-versa.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Wed, 13 Dec 2017 17:56:31 +0000 (18:56 +0100)]
s390/qeth: lock IP table while applying takeover changes
Modifying the flags of an IP addr object needs to be protected against
eg. concurrent removal of the same object from the IP table.
Fixes:
5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Wed, 13 Dec 2017 17:56:30 +0000 (18:56 +0100)]
s390/qeth: don't apply takeover changes to RXIP
When takeover is switched off, current code clears the 'TAKEOVER' flag on
all IPs. But the flag is also used for RXIP addresses, and those should
not be affected by the takeover mode.
Fix the behaviour by consistenly applying takover logic to NORMAL
addresses only.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann [Wed, 13 Dec 2017 17:56:29 +0000 (18:56 +0100)]
s390/qeth: apply takeover changes when mode is toggled
Just as for an explicit enable/disable, toggling the takeover mode also
requires that the IP addresses get updated. Otherwise all IPs that were
added to the table before the mode-toggle, get registered with the old
settings.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Will Deacon [Fri, 15 Dec 2017 16:07:22 +0000 (16:07 +0000)]
arm64: fpsimd: Fix copying of FP state from signal frame into task struct
Commit
9de52a755cfb6da5 ("arm64: fpsimd: Fix failure to restore FPSIMD
state after signals") fixed an issue reported in our FPSIMD signal
restore code but inadvertently introduced another issue which tends to
manifest as random SEGVs in userspace.
The problem is that when we copy the struct fpsimd_state from the kernel
stack (populated from the signal frame) into the struct held in the
current thread_struct, we blindly copy uninitialised stack into the
"cpu" field, which means that context-switching of the FP registers is
no longer reliable.
This patch fixes the problem by copying only the user_fpsimd member of
struct fpsimd_state. We should really rework the function prototypes
to take struct user_fpsimd_state * instead, but let's just get this
fixed for now.
Cc: Dave Martin <Dave.Martin@arm.com>
Fixes:
9de52a755cfb6da5 ("arm64: fpsimd: Fix failure to restore FPSIMD state after signals")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
David S. Miller [Fri, 15 Dec 2017 16:02:11 +0000 (11:02 -0500)]
Merge tag 'batadv-net-for-davem-
20171215' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- Initialize the fragment headers, by Sven Eckelmann
- Fix a NULL check in BATMAN V, by Sven Eckelmann
- Fix kernel doc for the time_setup() change, by Sven Eckelmann
- Use the right lock in BATMAN IV OGM Update, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Fri, 15 Dec 2017 07:44:21 +0000 (08:44 +0100)]
mlxsw: spectrum: Disable MAC learning for ovs port
Learning is currently enabled for ports which are OVS slaves -
even though OVS doesn't need this indication.
Since we're not associating a fid with the port, HW would continuously
notify driver of learned [& aged] MACs which would be logged as errors.
Fixes:
2b94e58df58c ("mlxsw: spectrum: Allow ports to work under OVS master")
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steven Rostedt [Sat, 2 Dec 2017 18:04:54 +0000 (13:04 -0500)]
sched/rt: Do not pull from current CPU if only one CPU to pull
Daniel Wagner reported a crash on the BeagleBone Black SoC.
This is a single CPU architecture, and does not have a functional
arch_send_call_function_single_ipi() implementation which can crash
the kernel if that is called.
As it only has one CPU, it shouldn't be called, but if the kernel is
compiled for SMP, the push/pull RT scheduling logic now calls it for
irq_work if the one CPU is overloaded, it can use that function to call
itself and crash the kernel.
Ideally, we should disable the SCHED_FEAT(RT_PUSH_IPI) if the system
only has a single CPU. But SCHED_FEAT is a constant if sched debugging
is turned off. Another fix can also be used, and this should also help
with normal SMP machines. That is, do not initiate the pull code if
there's only one RT overloaded CPU, and that CPU happens to be the
current CPU that is scheduling in a lower priority task.
Even on a system with many CPUs, if there's many RT tasks waiting to
run on a single CPU, and that CPU schedules in another RT task of lower
priority, it will initiate the PULL logic in case there's a higher
priority RT task on another CPU that is waiting to run. But if there is
no other CPU with waiting RT tasks, it will initiate the RT pull logic
on itself (as it still has RT tasks waiting to run). This is a wasted
effort.
Not only does this help with SMP code where the current CPU is the only
one with RT overloaded tasks, it should also solve the issue that
Daniel encountered, because it will prevent the PULL logic from
executing, as there's only one CPU on the system, and the check added
here will cause it to exit the RT pull code.
Reported-by: Daniel Wagner <wagi@monom.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-rt-users <linux-rt-users@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes:
4bdced5c9 ("sched/rt: Simplify the IPI based RT balancing logic")
Link: http://lkml.kernel.org/r/20171202130454.4cbbfe8d@vmware.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Fri, 15 Dec 2017 12:47:51 +0000 (13:47 +0100)]
tools/headers: Synchronize kernel <-> tooling headers
Two kernel headers got modified recently, which are used by tooling as well:
tools/include/uapi/linux/kvm.h
arch/x86/include/asm/cpufeatures.h
None of those changes have an effect on tooling, so do a plain copy.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Fri, 15 Dec 2017 12:36:56 +0000 (13:36 +0100)]
objtool: Resync objtool's instruction decoder source code copy with the kernel's latest version
This fixes the following warning:
warning: objtool: x86 instruction decoder differs from kernel
Note that there are cleanups queued up for v4.16 that will make this
warning more informative and will make the syncing easier as well.
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Randy Dunlap [Mon, 11 Dec 2017 18:38:36 +0000 (10:38 -0800)]
x86/decoder: Fix and update the opcodes map
Update x86-opcode-map.txt based on the October 2017 Intel SDM publication.
Fix INVPID to INVVPID.
Add UD0 and UD1 instruction opcodes.
Also sync the objtool and perf tooling copies of this file.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/aac062d7-c0f6-96e3-5c92-ed299e2bd3da@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Lutomirski [Thu, 14 Dec 2017 21:19:07 +0000 (13:19 -0800)]
x86/power: Make restore_processor_context() sane
My previous attempt to fix a couple of bugs in __restore_processor_context():
5b06bbcfc2c6 ("x86/power: Fix some ordering bugs in __restore_processor_context()")
... introduced yet another bug, breaking suspend-resume.
Rather than trying to come up with a minimal fix, let's try to clean it up
for real. This patch fixes quite a few things:
- The old code saved a nonsensical subset of segment registers.
The only registers that need to be saved are those that contain
userspace state or those that can't be trivially restored without
percpu access working. (On x86_32, we can restore percpu access
by writing __KERNEL_PERCPU to %fs. On x86_64, it's easier to
save and restore the kernel's GSBASE.) With this patch, we
restore hardcoded values to the kernel state where applicable and
explicitly restore the user state after fixing all the descriptor
tables.
- We used to use an unholy mix of inline asm and C helpers for
segment register access. Let's get rid of the inline asm.
This fixes the reported s2ram hangs and make the code all around
more logical.
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reported-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Zhang Rui <rui.zhang@intel.com>
Fixes:
5b06bbcfc2c6 ("x86/power: Fix some ordering bugs in __restore_processor_context()")
Link: http://lkml.kernel.org/r/398ee68e5c0f766425a7b746becfc810840770ff.1513286253.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Lutomirski [Thu, 14 Dec 2017 21:19:06 +0000 (13:19 -0800)]
x86/power/32: Move SYSENTER MSR restoration to fix_processor_context()
x86_64 restores system call MSRs in fix_processor_context(), and
x86_32 restored them along with segment registers. The 64-bit
variant makes more sense, so move the 32-bit code to match the
64-bit code.
No side effects are expected to runtime behavior.
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: http://lkml.kernel.org/r/65158f8d7ee64dd6bbc6c1c83b3b34aaa854e3ae.1513286253.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andy Lutomirski [Thu, 14 Dec 2017 21:19:05 +0000 (13:19 -0800)]
x86/power/64: Use struct desc_ptr for the IDT in struct saved_context
x86_64's saved_context nonsensically used separate idt_limit and
idt_base fields and then cast &idt_limit to struct desc_ptr *.
This was correct (with -fno-strict-aliasing), but it's confusing,
served no purpose, and required #ifdeffery. Simplify this by
using struct desc_ptr directly.
No change in functionality.
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: http://lkml.kernel.org/r/967909ce38d341b01d45eff53e278e2728a3a93a.1513286253.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Thomas Gleixner [Fri, 15 Dec 2017 09:32:03 +0000 (10:32 +0100)]
posix-timer: Properly check sigevent->sigev_notify
timer_create() specifies via sigevent->sigev_notify the signal delivery for
the new timer. The valid modes are SIGEV_NONE, SIGEV_SIGNAL, SIGEV_THREAD
and (SIGEV_SIGNAL | SIGEV_THREAD_ID).
The sanity check in good_sigevent() is only checking the valid combination
for the SIGEV_THREAD_ID bit, i.e. SIGEV_SIGNAL, but if SIGEV_THREAD_ID is
not set it accepts any random value.
This has no real effects on the posix timer and signal delivery code, but
it affects show_timer() which handles the output of /proc/$PID/timers. That
function uses a string array to pretty print sigev_notify. The access to
that array has no bound checks, so random sigev_notify cause access beyond
the array bounds.
Add proper checks for the valid notify modes and remove the SIGEV_THREAD_ID
masking from various code pathes as SIGEV_NONE can never be set in
combination with SIGEV_THREAD_ID.
Reported-by: Eric Biggers <ebiggers3@gmail.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: stable@vger.kernel.org
Andreas Platschek [Thu, 14 Dec 2017 11:50:51 +0000 (12:50 +0100)]
dmaengine: fsl-edma: disable clks on all error paths
Previously enabled clks are only disabled if clk_prepare_enable() fails.
However, there are other error paths were the previously enabled
clocks are not disabled.
To fix the problem, fsl_disable_clocks() now takes the number of clocks
that shall be disabled + unprepared. For existing calls were all clocks
were already successfully prepared + enabled, DMAMUX_NR is passed to
disable + unprepare all clocks.
In error paths were only some clocks were successfully prepared +
enabled the loop counter is passed, in order to disable + unprepare
all successfully prepared + enabled clocks.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Andreas Platschek <andreas.platschek@opentech.at>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>