drm/amd/display: Add PState change high hook for DCN32

For some reason, we missed the PState check for DCN32 which may cause
issues for clock transition. This commit add that required hook.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable VCN PG on GC11_0_1

Enable VCN PG on GC11_0_1

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

drm/amd/display: Add missing mask sh for SYM32_TP_SQ_PULSE register

There is a missing register mask in dcn32 causing the hardware
programming is not executed when programming SQ_num test pattern for
DP2.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add missing SDP registers to DCN32 reglist

[Why]
Certain features require the additional DP SDP configuration registers
DP_SEC_CNTL1 and DP_SEC_CNTL5 in order to function correctly.

The DCN32 DIO stream encoder reglist is currently missing these two
registers.

[How]
Add the missing registers to the DCN32 DIO stream encoder reglist.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix disable DSC logic in the DIO code

[Why]
In DIO stream encoder, definition of DP_DSC_MODE is changed (only
enable/disable) In OPTC, OTG_SET_V_TOTAL_MIN_MASK_EN is removed (same as
DCN3.1)

[How]
In DIO stream encoder, update enc32_dp_set_dsc_config(). In OPTC, use
DCN3.1 version for function interfaces .set_vrr_m_const and .set_drr

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix merging dynamic ODM+MPO configs on DCN32

[WHY&HOW?]
When merging ODM pipes that are using MPO, we must copy the stream_res
from the new top pipe to the bottom pipe so that the overlayed plane is
not pointing to the wrong stream assets.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Adding missing HDMI ACP SEND register

Add HDMI ACP bit field definition for DCN32.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove OPTC lock check

At some point, we decided to blank HUBP during pixel data blank, and to
handle that, we added some OPTC lock checks. Later, we realized that
this change caused multiple regression, and we removed it. Nevertheless,
we still have some leftovers that might affect some ASIC behavior, and
this commit drops those changes to keep the code consistent.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix SubVP control flow in the MPO context

SubVP has some issues related to how we allocate and enable it. This
commit fixes this behavior by adding the proper check and configuration
to the SubVP code path.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update DCN321 hook that deals with pipe aquire

DCN provides a hook to check if we can have a new pipe allocation based
on some DC constraints. If the current configuration supports the new
pipe request, DC updates its context; otherwise, it will keep the same
configuration. This behavior is similar across multiple ASICs, and for
this reason, we reused DCN20 on DCN321. However, this DCN32x has some
peculiarities which require its function to avoid weird pipe split
issues. This commit update this issue by using
dcn32_acquire_idle_pipe_for_head_pipe_in_layer instead of
dcn20_acquire_idle_pipe_for_layer.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop unused code for DCN32/321

Under DCN32/321 we identified some code paths that DC never executes.
This commit removes those unused codes to avoid distractions when
debugging issues.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: block odd h_total timings from halving pixel rate

why:
when dynamic odm was turned on, there is also logic to halve the pixelclk
this still turned on when we avoided odm in the case of odd h_total timings

how:
block the pixel clk mechanism also in the case of odd h_total timings

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix vupdate and vline position calculation

[how]
Large deltas for periodic interrupts could result in the interrupt not
being programmed properly and thus not firing.

[why]
Add proper wrap-around support for calculating VUPDATE and VLINE
positions.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: write all 4 bytes of FFE_PRESET dpcd value

[why]
According to specs, it expects us to write all 4 bytes even if
current lane count is less than 4.

Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Increase compbuf size prior to updating clocks

[WHY?]
Clocks are updating based on the incoming context's support, however the new
compbuf size is not programmed prior to udpating clocks, which can result in
P-State hangs.

[HOW?]
Increase compbuf size prior to updating clocks.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Keep OTG on when Z10 is disable

[Why]
Disable OTG when PSRSU with z10 even if z10 is disable

[How]
Reverse condition to keep OTG on when Z10 is disable

Reviewed-by: Robin Chen <po-tchen@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add dummy pstate workaround to dcn315

DCN315 has to always allow pstate change or SMU will hang. This
workaround achieves this by applying a low pstate change latency
to be used when pstate is calculated to be unsupported. This lower
latency only accounts for memory retraining; a previous change
handles locking in the highest available pstate allowing us to minimize
required latency hiding to only account for memory retraining.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: skip commit minimal transition state

[WHY]
Now dynamic ODM will now be disabled when MPO is required safe
transitions to avoid underflow, but we are triggering the way of
minimal transition too often. Commit state of dc with no check
will do pipeline setup which may re-initialize the component with no
need such as audio.

[HOW]
Just do the minimal transition when all of pipes are in use, otherwise
return true to skip.

Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add log for LTTPR

[Why & How]
Adding log for LTTPR to facilitate debugging.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: For SubVP pipe split case use min transition into MPO

[Description]
- For SubVP pipe split case we need to use a minimial transition
  when opening MPO video since we are transitioning from 4 pipes
  to 3 pipes where an OPP for a previous MPCC will change
- Also save and restore mall config when doing fast_validate in case
  there was a shallow copy of the dc->current_state

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor edp ILR caps codes

We split out ILR config from "global" to "per-panel" config settings.

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Allow PSR exit when panel is disconnected

[HOW&WHY]
Fixed check to only avoid PSR entry when panel
is disconnected. PSR exit can be permitted to restore
the HW to it's non-PSR state.

Reviewed-by: Jayendran Ramani <Jayendran.Ramani@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Iswara Nagulendran <Iswara.Nagulendran@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: AUX tracing cleanup

[Why && How]
Remove the unnecessary AUX trace and use one trace for AUX failure.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix integer overflow during MSA V_Freq calculation

[why]
Analyzer shows incorrect V freq in MSA for some large timing.

[how]
Cast an 32 bit integer to uint64_t before multiplication to avoid
integer overflow for a very large timing.

Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable GSL when enabling phantom pipe

[Description]
When enabling phantom pipe on a pipe that was previously
using immediate flip, we have to disable GSL or this will
prevent the update from taking place right away on the phantom
pipe when we enable it in FW

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: prevent S4 test from failing

[why]
limit the vm prefetch check for now, until the feature is fully
verified.

Reviewed-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: correct hostvm flag"

This reverts commit 796d6a37ff5ffaf9f2dc0f3f4bf9f4a1034c00de.

4K144 resolution isn't available on DCN31.

Reviewed-by: Sherry Wang <Yao.Wang1@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Block SubVP if rotation being used

[Description]
- SubVP rotation support is not explicitly implemented,
  so block SubVP in rotation cases to avoid unexpected
  behaviors

Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix dcn315 dml detile overestimation

DML does not take the fact that dcn315 does not have enough detile
buffer to max all pipes. This change adds a workaround to apply
the same logic DC does when calculating detile buffer size in DML.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reorder FCLK P-state switch sequence for DCN32

[WHY?]
In some cases, DCFCLK hardmin requests are not acknowledged by SMU as
the requested clock does not have a compatible ratio with current FCLK,
and it cannot be changed as FCLK P-state is not allowed.

[HOW?]
Allow FCLK p-state change prior to changing DCFCLK hardmin.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Program SubVP in dc_commit_state_no_check

[Why?]
Currently SubVP programming is only done in commit_planes_for_stream, as
it was expected only this call would add/remove planes from a
display.

[How?]
Add SubVP programming to dc_commit_state_no_check.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/amd/pm: check the return value of amdgpu_bo_kmap

amdgpu_bo_kmap() returns error when fails to map buffer object. Add the
error check and propagate the error.

Signed-off-by: Li Zhong <floridsleeves@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: change to enc314_stream_encoder_dp_blank static

enc314_stream_encoder_dp_blank is only used in dcn314_dio_stream_encoder.c now,
change it to static.

Fixes: c55bf690fe79 ("drm/amd/display: Add explicit FIFO disable for DP blank")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Only commit SubVP state after pipe programming

[Description]
We only want to commit the SubVP config to DMCUB
after the main and phantom pipe programming has
completed. Commiting the state early can cause
issues such as P-State being allowed by the HW
early which causes the SubVP state machine to
go into a bad state

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix mutex lock in dcn10

Removal of DC_FP_* wrappers from dml (9696679bf7ac) provokes a mutex
lock [2] on the amdgpu driver. Re-arrange the dcn10 code to avoid
locking the mutex by placing the DC_FP_* wrappers around the proper
functions.

This fixes the following WARN/stacktrace:

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 227, name: systemd-udevd
preempt_count: 1, expected: 0
CPU: 4 PID: 227 Comm: systemd-udevd Not tainted 6.0.0-rc6-qtec-standard #2
Hardware name: Qtechnology A/S QT5222/QT5221, BIOS v1.0.1 06/07/2021
Call Trace:
 <TASK>
 dump_stack_lvl+0x33/0x42
 __might_resched.cold.172+0xa5/0xb3
 mutex_lock+0x1a/0x40
 amdgpu_dpm_get_clock_by_type_with_voltage+0x38/0x70 [amdgpu]
 dm_pp_get_clock_levels_by_type_with_voltage+0x64/0xa0 [amdgpu]
 dcn_bw_update_from_pplib+0x70/0x340 [amdgpu]
 dcn10_create_resource_pool+0x8c8/0xd20 [amdgpu]
 ? __kmalloc+0x1c7/0x4a0
 dc_create_resource_pool+0xe7/0x190 [amdgpu]
 dc_create+0x212/0x5d0 [amdgpu]
 amdgpu_dm_init+0x246/0x370 [amdgpu]
 ? schedule_hrtimeout_range_clock+0x93/0x120
 ? phm_wait_for_register_unequal.part.1+0x4a/0x80 [amdgpu]
 dm_hw_init+0xe/0x20 [amdgpu]
 amdgpu_device_init.cold.56+0x1324/0x1653 [amdgpu]
 ? pci_bus_read_config_word+0x43/0x80
 amdgpu_driver_load_kms+0x15/0x120 [amdgpu]
 amdgpu_pci_probe+0x116/0x320 [amdgpu]
 pci_device_probe+0x97/0x110
 really_probe+0xdd/0x340
 __driver_probe_device+0x80/0x170
 driver_probe_device+0x1f/0x90
 __driver_attach+0xdc/0x180
 ? __device_attach_driver+0x100/0x100
 ? __device_attach_driver+0x100/0x100
 bus_for_each_dev+0x74/0xc0
 bus_add_driver+0x19e/0x210
 ? kset_find_obj+0x30/0xa0
 ? 0xffffffffa0a5b000
 driver_register+0x6b/0xc0
 ? 0xffffffffa0a5b000
 do_one_initcall+0x4a/0x1f0
 ? __vunmap+0x28e/0x2f0
 ? __cond_resched+0x15/0x30
 ? kmem_cache_alloc_trace+0x3d/0x440
 do_init_module+0x4a/0x1e0
 load_module+0x1cba/0x1e10
 ? __do_sys_finit_module+0xb7/0x120
 __do_sys_finit_module+0xb7/0x120
 do_syscall_64+0x3c/0x80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff2b5f5422d
Code: 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48>
3d 01 f0 ff ff 73 01 c3 48 8b 0d c3 ab 0e 00 f7 d8 64 89 01 48
RSP: 002b:00007ffc44ab28e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 0000555c566a9240 RCX: 00007ff2b5f5422d
RDX: 0000000000000000 RSI: 00007ff2b60bb353 RDI: 0000000000000019
RBP: 00007ff2b60bb353 R08: 0000000000000000 R09: 0000555c566a9240
R10: 0000000000000019 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000020000 R14: 0000000000000000 R15: 0000000000000000
</TASK>

Fixes: 9696679bf7ac ("drm/amd/display: remove DC_FP_* wrapper from dml folder")
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Daniel Gomez <daniel@qtec.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'amd-drm-next-6.1-2022-09-30' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.1-2022-09-30:

amdgpu:
- RLC FW code cleanup
- RLC fixes for GC 11.x
- SMU 13.x fixes
- CP FW code cleanup
- SDMA FW code cleanup
- GC 11.x fixes
- DCN 3.2.x fixes
- DCN 3.1.4 fixes
- Misc fixes
- RAS fixes
- SR-IOV fixes
- VCN 4.x fixes

amdkfd:
- GC 11.x fixes
- Xnack fixes
- UBSAN warning fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930162012.5823-1-alexander.deucher@amd.com

Merge tag 'drm-misc-next-2022-09-30' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.1:

Core Changes:
- Add dma_resv_assert_held to vmap/vunmap calls.
- Add kunit tests for some format conversion calls.
- Don't rewrite link config when setting phy test pattern in
  DP link training.

Driver Changes:
- Assorted small fixes in bridge/lt8192b, qxl, virtio-gpu, ast.
- Fix corrupted image output in lt8912b.
- Fix driver unbind in meson.
- Add INX, BOE, AUO, Multi-Inno Technology panels to panel-edp.
- Synchronize access to GEM bo's in simpledrm, ssd130x.
- Use dev_err_probe in panel-edp and panel-simple.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/afbd505a-3799-c73b-8008-ef6e156ad7e1@linux.intel.com

drm/amdkfd: Fix UBSAN shift-out-of-bounds warning

This was fixed in initialize_cpsch before, but not in initialize_nocpsch.
Factor sdma bitmap initialization into a helper function to apply the
correct implementation in both cases without duplicating it.

v2: Added a range check

Reported-by: Ellis Michael <ellis@ellismichael.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Graham Sider <Graham.Sider@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Track unified memory when switching xnack mode

Unified memory usage with xnack off is tracked to avoid oversubscribe
system memory, with xnack on, we don't track unified memory usage to
allow memory oversubscribe. When switching xnack mode from off to on,
subsequent free ranges allocated with xnack off will not unreserve
memory. When switching xnack mode from on to off, subsequent free ranges
allocated with xnack on will unreserve memory. Both cases cause memory
accounting unbalanced.

When switching xnack mode from on to off, need reserve already allocated
svm range memory. When switching xnack mode from off to on, need
unreserve already allocated svm range memory.

v6: Take prange lock to access range child list
v5: Handle prange child ranges
v4: Handle reservation memory failure
v3: Handle switching xnack mode race with svm_range_deferred_list_work
v2: Handle both switching xnack from on to off and from off to on cases

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable sram on vcn_4_0_2

Enable sram on vcn_4_0_2

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable VCN DPG for GC11_0_1

Enable VCN DPG on GC11_0_1

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/msm: Fix build break with recent mm tree

9178e3dcb121 ("mm: discard __GFP_ATOMIC") removed __GFP_ATOMIC,
replacing it with a check for not __GFP_DIRECT_RECLAIM.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220929161404.2769414-1-robdclark@gmail.com

Merge tag 'drm-intel-next-fixes-2022-09-29' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Fix release build bug in 'remove GuC log size module parameters' (John Harrison)
- Remove ipc_enabled from struct drm_i915_private (Jani Nikula)
- Do not cleanup obj with NULL bo->resource (Nirmoy Das)
- Fix device info for devices without display (Jani Nikula)
- Force DPLL calculation for TC ports after readout (Ville Syrjälä)
- Use i915_vm_put on ppgtt_create error paths (Chris Wilson)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YzWqtwPNxAe+r9FO@tursulin-desk

drm/panel: simple: Use dev_err_probe() to simplify code

In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs.

Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220929015503.17301-3-yuancan@huawei.com

drm/panel: panel-edp: Use dev_err_probe() to simplify code

In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs.

Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220929015503.17301-2-yuancan@huawei.com
Link: https://patchwork.freedesktop.org/patch/msgid/20220929015503.17301-2-yuancan@huawei.com

drm/panel: simple: Add Multi-Inno Technology MI0800FT-9

Add Multi-Inno Technology MI0800FT-9 8" 800x600 DPI panel support.

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220812114832.4946-1-cniedermaier@dh-electronics.com

dt-bindings: display: simple: Add Multi-Inno Technology MI0800FT-9 panel

Add Multi-Inno Technology MI0800FT-9 8" 800x600 DPI panel
compatible string.

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220812114600.4895-1-cniedermaier@dh-electronics.com

drm/amdgpu: correct the memcpy size for ip discovery firmware

Use fw->size instead of discovery_tmr_size for fallback path.

Signed-off-by: Le Ma <le.ma@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Skip put_reset_domain if it doesn't exist

For xgmi sriov, the reset is handled by host driver and hive->reset_domain
is not initialized so need to check if it exists before doing a put.

Signed-off-by: Vignesh Chander <Vignesh.Chander@amd.com>
Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove switch from amdgpu_gmc_noretry_set

Simplify the logic in amdgpu_gmc_noretry_set by getting rid of the
switch. Also set noretry=1 as default for GFX 10.3.0 and greater since
retry faults are not supported.

Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix mc_umc_status used uninitialized warning

On ChromeOS clang build, the following warning is seen:

/mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:463:6: error: variable 'mc_umc_status' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
        if (mca_addr == UMC_INVALID_ADDR) {
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
/mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:485:21: note: uninitialized use occurs here
        if ((REG_GET_FIELD(mc_umc_status, MCA_UMC_UMC0_MCUMC_STATUST0, Val) == 1 &&
                           ^~~~~~~~~~~~~
/mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/../amdgpu/amdgpu.h:1208:5: note: expanded from macro 'REG_GET_FIELD'
        (((value) & REG_FIELD_MASK(reg, field)) >> REG_FIELD_SHIFT(reg, field))
           ^~~~~
/mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:463:2: note: remove the 'if' if its condition is always true
        if (mca_addr == UMC_INVALID_ADDR) {
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/mnt/host/source/src/third_party/kernel/v5.15/drivers/gpu/drm/amd/amdgpu/umc_v6_7.c:460:24: note: initialize the variable 'mc_umc_status' to silence this warning
        uint64_t mc_umc_status, mc_umc_addrt0;
                              ^
                               = 0
1 error generated.
make[5]: *** [/mnt/host/source/src/third_party/kernel/v5.15/scripts/Makefile.build:289: drivers/gpu/drm/amd/amdgpu/umc_v6_7.o] Error 1

Fix by initializing mc_umc_status = 0.

Fixes: 1014bd1cb32552 ("drm/amdgpu: support to convert dedicated umc mca address")
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Prevent OTG shutdown during PSR SU

[Why]

Enabling Z10 optimizations allows DMUB to disable the OTG during PSR
link-off. This theoretically saves power by putting more of the display
hardware to sleep. However, we observe that with PSR SU, it causes
visual artifacts, higher power usage, and potential system hang.

This is partly due to an odd behavior with the VStartup interrupt used
to signal DRM vblank events. If the OTG is toggled on/off during a PSR
link on/off cycle, the vstartup interrupt fires twice in quick
succession. This generates incorrectly timed vblank events.
Additionally, it can cause cursor updates to generate visual artifacts.

Note that this is not observed with PSR1 since PSR is fully disabled
when there are vblank event requestors. Cursor updates are also
artifact-free, likely because there are no selectively-updated (SU)
frames that can generate artifacts.

[How]

A potential solution is to disable z10 idle optimizations only when fast
updates (flips & cursor updates) are committed. A mechanism to do so
would require some thoughtful design. Let's just disable idle
optimizations for PSR2 for now.

Fixes: 7cc191ee7621 ("drm/amd/display: Implement MPO PSR SU")
Reported-by: August Wikerfors <git@augustwikerfors.se>
Link: https://lore.kernel.org/r/c1f8886a-5624-8f49-31b1-e42b6d20dcf5@augustwikerfors.se/
Tested-by: August Wikerfors <git@augustwikerfors.se>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add page retirement handling for CPU RAS

Do RAS page retirement in poison consumption handler unconditionally.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use RAS error address convert api in mca notifier

Use the convert interface to simplify code.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: support to convert dedicated umc mca address

Update umc error address query interface, the mca address can be read
from register or input from parameter.

TODO: define a common address conversion function to simplify the code.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: export umc error address convert interface

Make it global so we can convert specific mca address.

v2: rename query_error_address_per_channel to
convert_ras_error_address

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix sdma v4 init microcode error

Fix init SDMA microcode error for sdma v4, which caused by mistake when
rearch sdma init microcode function (coding 4.2.2 to 4.2.0).

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix array-bounds error in dc_stream_remove_writeback()

Address the following error:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c: In function ‘dc_stream_remove_writeback’:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:527:55: error: array subscript [0, 0] is outside array bounds of ‘struct dc_writeback_info[1]’ [-Werror=array-bounds]
  527 |                                 stream->writeback_info[j] = stream->writeback_info[i];
      |                                 ~~~~~~~~~~~~~~~~~~~~~~^~~
In file included from ./drivers/gpu/drm/amd/amdgpu/../display/dc/dc.h:1269,
                 from ./drivers/gpu/drm/amd/amdgpu/../display/dc/inc/core_types.h:29,
                 from ./drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dc_common.h:29,
                 from drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:27:
./drivers/gpu/drm/amd/amdgpu/../display/dc/dc_stream.h:241:34: note: while referencing ‘writeback_info’
  241 |         struct dc_writeback_info writeback_info[MAX_DWB_PIPES];
      |

Currently, we aren't checking to see if j remains within
writeback_info[]'s bounds. So, add a check to make sure that we aren't
overflowing the buffer.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add amdgpu suspend-resume code path under SRIOV

- Under SRIOV, we need to send REQ_GPU_FINI to the hypervisor
  during the suspend time. Furthermore, we cannot request a
  mode 1 reset under SRIOV as VF. Therefore, we will skip it
  as it is called in suspend_noirq() function.

- In the resume code path, we need to send REQ_GPU_INIT to the
  hypervisor and also resume PSP IP block under SRIOV.

Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix compiler warning for amdgpu_gfx_cp_init_microcode

Change the type of parameter on amdgpu_gfx_cp_init_microcode to fix
compiler warning.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix a compiling error in old kernels

This patch is used to fix following compiling error that occurs in
some old kernels.

 error: ‘for’ loop initial declarations are only allowed in C99 mode
    for (int i = 0; i < dc->res_pool->res_cap->num_dsc; i++) {

Signed-off-by: Asher Song <Asher.Song@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add rlc_sr_cntl_list to firmware array

To allow upload the list via psp

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove fence_process in count_emitted

The function amdgpu_fence_count_emitted used in work_hander should not call
amdgpu_fence_process which must be used in irq handler.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Correct the position in patch_cond_exec

The current position calulated in gfx_v9_0_ring_emit_patch_cond_exec
underflows when the wptr is divisible by ring->buf_mask + 1.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor LTTPR mode selection

[WHY]
Previously, LTTPR mode was decided during detection which makes
link training inflexible as mode can't be dynamically changed.

[HOW]
-Remove lttpr_mode from link struct, and move to link training settings
-Defer choosing LTTPR mode until link training

Other DP changes included:
-Only use fixed vs/pe link training sequence for 8b/10b encoding
-Restrict fixed vs aux timeout workaround to Yellow Carp family

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.205

This version brings along following fixes:

    - LTTPR mode can be be dynamically changed
    - fixes divide by zero error
    - features able to use same interface to update cursor info
    - fixes for llvm compilation issues
    - Fixes DIO FIFO underflow and other FIFO errors
    - Partially valid EDIDs handled properly
    - Phatom pipes are skipped when checking pending flip
    - Fixed audio on audio on display after unplugging

Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix a divide by zero error

[Why&How]

Incorrect variable was being checked for zero condition.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Only use ODM2:1 policy for high pixel rate displays

We only gain a benefit of using the ODM2:1 dynamic policy if it allow us
to decrease DISPCLK to use the VMIN freq.  If the display config can
already achieve VMIN DISPCLK freq without ODM2:1, don't apply the
policy.

Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix various dynamic ODM transitions on DCN32

[Why&How]

Several transitions were fixed that will allow Dynamic ODM and MPO
transitions to be supported on DCN32.

1) Due to resource limitations, in certain scenarios that require an MPO
plane to be split, the features cannot be combined with the current
policy. This is due to unsafe transitions being required (OPP instance
per MPCC being switched on active pipe is not supported by DCN), to
support the split plane with ODM active as it moves across the viewport.
Dynamic ODM will now be disabled when MPO is required.

2) When exiting MPO and re-entering ODM, DC assigns an inactive pipe for
the next ODM pipe, which under previous power gating policy would result
in programming a gated DSC HW block. New policy dynamically
gates/un-gates DSC blocks when Dynamic ODM is active to support

transitions on DCN32 only.

3) Entry and exit from 3 plane MPO and Dynamic ODM requires a minimal
transition so that all pipes which require their MPCC OPP instance to
be changed have a full frame to be disabled before reprogramming. To
solve this, the Dynamic ODM policy now utilizes minimal state
transitions when entering or exiting 3 plane scenarios.

4) Various fixes to DCN32 pipe merge/split algorithm to support Dynamic
ODM and MPO transitions.

In summary, this commit fixes various transitions to support ODM->MPO
and MPO->ODM.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: polling vid stream status in hpo dp blank

[why]
vid stream control is double bufferred, if we don't wait for video
stream enable set to 0, we may get temporary image corruption
showing on the stream when setting PIXEL_TO_SYMBOL_FIFO_ENABLE to 0.

Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix CAB allocation calculation

[Description]
Accidentally added when should have subtracted
in calculation

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: skip phantom pipes when checking for pending flip

[Why&How]
Phantom pipes are not programmed fully to hardware and hence we should
not expect a flip completion.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update MALL SS NumWays calculation

[Description]
Update MALL SS NumWays calculation according
to programming guide.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: skip phantom pipes when checking for pending flip

[Why&How]
Phantom pipes are not programmed fully to hardware and hence we should
not expect a flip completion.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fill in clock values when DPM is not enabled

[Why]
For individual feature testing, PMFW may not report all clock
values back. Driver will default them to 0 but this will
cause the BB table to be skipped and default to one state
with max clocks.

[How]
Add helper function to scan through initial clock values and
populate them with default clock limits so that BB table
can be built.
Add dpm_enabled flag to check when DPM is not enabled and
to trigger helper function.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Cursor Info Update refactor

Dc: cursor info update: phase 1:

[Why]

Different feature might need to update cursor info, but
With different approaches.
To unify this diversity problem, all features should use
The same interface to update cursor.

Reviewed-by: Reza Amini <reza.amini@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Max Tseng <max.tseng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Avoid unnecessary pixel rate divider programming

[Why]
Programming pixel rate divider when FIFO is enabled can cause FIFO error.

[How]
Skip divider programming when divider values are the same to prevent FIFO
error.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove assert for odm transition case

Remove assert that will hit during odm transition case, since this is a
valid case.

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add ABM control to panel_config struct.

Reviewed-by: Josip Pavic <Josip.Pavic@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable MALL when TMZ surface

[Description]
- Don't use MALL buffering of any kind when the
  surface is TMZ
- Workaround for a HW bug

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix typo in get_pixel_rate_div

[Why & How]
Some FIFO errors still occur due to reading wrong pixel rate divider.
Fix typo to prevent FIFO error.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add debug keys for override bios settings.

[why]
adding debug keys used for compliance test.

Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix audio on display after unplugging another

Revert "dc: skip audio setup when audio stream is enabled"

This reverts commit 65fbfb02c2734cacffec5e3f492e1b4f1dabcf98

[why]
We have minimal pipe split transition method to avoid pipe
allocation outage.However, this method will invoke audio setup
which cause audio output stuck once pipe reallocate.

[how]
skip audio setup for pipelines which audio stream has been enabled

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add missing null check

[why]
There is a coding error for a missing null check for stream pointer when iterating through
pipe_ctx.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add explicit FIFO disable for DP blank

[Why]
We rely on DMCUB to do this when disabling the link but it should
actually come before we disable the DP VID stream.

If we don't then the FIFO can end up with underflow that persists
the next time it's enabled.

[How]
Add a DCN314 specific blank sequence that will disable the DIG FIFO
first.

Reviewed-by: Syed Hassan <Syed.Hassan@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Wrap OTG disable workaround with FIFO control

[Why]
The DIO FIFO will underflow if we turn off the OTG before we turn
off the FIFO.

Since this happens as part of the OTG workaround and we don't reset
the FIFO afterwards we see the error persist.

[How]
Add disable FIFO before the disable CRTC and enable FIFO after enabling
the CRTC.

Reviewed-by: Syed Hassan <Syed.Hassan@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add debug option for exiting idle optimizations on cursor updates

[Description]
- Have option to exit idle opt on cursor updates
for debug and optimizations purposes

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Brandon Syu<Brandon.Syu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Change EDID fallback condition

[Why]
Partially valid EDIDs on MST sinks are treated the same way as broken
EDIDs or read failures and result in a fallback EDID being used instead.

[How]
If edid_status is EDID_PARTIAL_VALID, prefer to use the valid EDID
blocks instead of using a fallback EDID.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Do DIO FIFO enable after DP video stream enable

[Why]
Avoids a race condition where DIO FIFO can underflow due to no incoming
data available.

[How]
Shift the FIFO enable below stream enable.

Make sure fullness level is written before the DIO reset takes place
and that we're not doing it twice.

Reviewed-by: Syed Hassan <Syed.Hassan@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove interface for periodic interrupt 1

[why]
Only a single VLINE interrupt is available so interface should not
expose the second one which is used by DMU firmware.

[how]
Remove references to periodic_interrupt1 and VLINE1 from DC interfaces.

Reviewed-by: Jaehyun Chung <jaehyun.chung@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update DCN32 to use new SR latencies

[Description]
Update to new SR latencies for DCN32

Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Avoid avoid unnecessary pixel rate divider programming

[Why]
Programming pixel rate divider when FIFO is enabled can cause FIFO error.

[How]
Skip divider programming when divider values are the same to prevent FIFO
error.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: fix dropped interrupt in kfd_int_process_v11

Shader wave interrupts were getting dropped in event_interrupt_wq_v11
if the PRIV bit was set to 1. This would often lead to a hang. Until
debugger logic is upstreamed, expand comment to stop early return.

Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: pass queue size and is_aql_queue to MES

Update mes_v11_api_def.h add_queue API with is_aql_queue parameter. Also
re-use gds_size for the queue size (unused for KFD). MES requires the
queue size in order to compute the actual wptr offset within the queue
RB since it increases monotonically for AQL queues.

v2: Make is_aql_queue assign clearer

Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: fix MQD init for GFX11 in init_mqd

Set remaining compute_static_thread_mgmt_se* accordingly.

Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Enable SA software trap.

Enables support for software trap for MES >= 4.
Adapted from implementation from Jay Cornwall.

v2: Add IP version check in conditions.
v3: Remove debugger code changes.

Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Add missing XGMI hive registers for mmhub 9.4.1

These are used by umr to sort the hive nodes since the kernel
initializes the nodes in order of bus enumeration not XGMI hive
enumeration.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: update vcn4 fw shared data structure

update VF_RB_SETUP_FLAG, add SMU_DPM_INTERFACE_FLAG,
and corresponding change in VCN4.

Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sdma6: use common function to init sdma fw

Use common function to init sdma v6 firmware ucode.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: support sdma struct v2 fw init

Support SDMA firmware init on common function for sdma v2 struct.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>