drm/edid: Fix drm_edid_encode_panel_id() kerneldoc warning

Due to a simple typo (apparently I can't count. It goes 0, 1, 2 and
not 0, 2, 3) we were getting a kernel doc warning that looked like
this:

include/drm/drm_edid.h:530: warning:
  Function parameter or member 'vend_chr_1' not described in 'drm_edid_encode_panel_id'
include/drm/drm_edid.h:530: warning:
  Excess function parameter 'vend_chr_3' description in 'drm_edid_encode_panel_id'

Fix it.

Fixes: 7d1be0a09fa6 ("drm/edid: Fix EDID quirk compile error on older compilers")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210927074104.1.Ibf22f2a0b75287a5d636c0570c11498648bf61c6@changeid

drm/print: Add deprecation notes to DRM_...() functions

It's hard for someone (like me) who's not following closely to know
what the suggested best practices are for error printing in DRM
drivers. Add some hints to the header file.

In general, my understanding is that:
* When possible we should be using a `struct drm_device` for logging
  and recent patches have tried to make it more possible to access a
  relevant `struct drm_device` in more places.
* For most cases when we don't have a `struct drm_device`, we no
  longer bother with DRM-specific wrappers on the dev_...() functions
  or pr_...() functions and just encourage drivers to use the normal
  functions.
* For debug-level functions where we might want filtering based on a
  category we'll still have DRM-specific wrappers, but we'll only
  support passing a `struct drm_device`, not a `struct
  device`. Presumably most of the cases where we want the filtering
  are messages that happen while the system is in a normal running
  state (AKA not during probe time) and we should have a `struct
  drm_device` then. If we absolutely can't get a `struct drm_device`
  then these functions begrudgingly accept NULL for the `struct
  drm_device` and hopefully the awkwardness of having to manually pass
  NULL will keep people from doing this unless absolutely necessary.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921082757.RFC.1.Ibd82d98145615fa55f604947dc6a696cc82e8e43@changeid

drm/edid: Fix EDID quirk compile error on older compilers

Apparently some compilers [1] cannot handle doing math on dereferenced
string constants at compile time. This has led to reports [2] of
compile errors like:

  In file included from drivers/gpu/drm/drm_edid.c:42:0:
  ./include/drm/drm_edid.h:525:2: error: initializer element is not constant
    ((((u32)((vend)[0]) - '@') & 0x1f) << 26 | \

Go back to the syntax I used in v4 of the patch series [3] that added
this code instead of what landed (v5). This syntax is slightly uglier
but should be much more compatible with varied compilers.

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69960#c18
[2] https://lore.kernel.org/r/874kaabdt5.fsf@intel.com/
[3] https://lore.kernel.org/r/20210909135838.v4.4.I6103ce2b16e5e5a842b14c7022a034712b434609@changeid/

Fixes: d9f91a10c3e8 ("drm/edid: Allow querying/working with the panel ID from the EDID")
Reported-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reported-by: Srikanth Myakam <smyakam@microsoft.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924075317.1.I1e58d74d501613f1fe7585958f451160d11b8a98@changeid

drm/gma500: Fix wrong pointer passed to PTR_ERR()

PTR_ERR() should access the value just tested by IS_ERR(),
otherwise the wrong error code will be returned.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: c2f17e60cbe1 ("drm/gma500: Embed struct drm_device in struct drm_psb_private")
Reported-by: Hulk Robot <hulkci@huawei.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210924094040.3631675-1-yangyingliang@huawei.com

drm/mipi-dsi: Create devm device attachment

MIPI-DSI devices need to call mipi_dsi_attach() when their probe is done
to attach against their host.

However, at removal or when an error occurs, that attachment needs to be
undone through a call to mipi_dsi_detach().

Let's create a device-managed variant of the attachment function that
will automatically detach the device at unbind.

Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910101218.1632297-5-maxime@cerno.tech

drm/mipi-dsi: Create devm device registration

Devices that take their data through the MIPI-DSI bus but are controlled
through a secondary bus like I2C have to register a secondary device on
the MIPI-DSI bus through the mipi_dsi_device_register_full() function.

At removal or when an error occurs, that device needs to be removed
through a call to mipi_dsi_device_unregister().

Let's create a device-managed variant of the registration function that
will automatically unregister the device at unbind.

Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910101218.1632297-4-maxime@cerno.tech

drm/bridge: Document the probe issue with MIPI-DSI bridges

Interactions between bridges, panels, MIPI-DSI host and the component
framework are not trivial and can lead to probing issues when
implementing a display driver. Let's document the various cases we need
too consider, and the solution to support all the cases.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910101218.1632297-3-maxime@cerno.tech

drm/bridge: Add documentation sections

The bridge documentation overview is quite packed already, and we'll add
some more documentation that isn't part of an overview at all.

Let's add some sections to the documentation to separate each bits.

Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910101218.1632297-2-maxime@cerno.tech

drm/bridge: parade-ps8640: Add support for AUX channel

Implement the first version of AUX support, which will be useful as
we expand the driver to support varied use cases.

Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: whitespace fixes reported by dim apply-branch]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921110556.v6.2.I1d6ea362dc76efa77cca2b46253d31b7651eaf17@changeid

drm/bridge: parade-ps8640: Use regmap APIs

Replace the direct i2c access (i2c_smbus_* functions) with regmap APIs,
which will simplify the future update on ps8640 driver.

Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: whitespace fixes reported by dim apply-branch]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921110556.v6.1.I2351df94f18d5d8debc22d4d100f36fac560409a@changeid

drm/gma500: Managed device release

Set up a clean-up action to automatically release device resources
during driver shutdown. Remove manual release code.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210920141051.30988-6-tzimmermann@suse.de

drm/gma500: Remove dev_priv branch from unload function

The value of dev_priv in psb_driver_unload() is always non-zero. Remove
the respective test.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210920141051.30988-5-tzimmermann@suse.de

drm/gma500: Embed struct drm_device in struct drm_psb_private

Embed struct drm_device in struct drm_psb_private. Replace the use
of dev_private by an upcast operation. Switch to managed release of
struct drm_psb_private.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210920141051.30988-4-tzimmermann@suse.de

drm/gma500: Disable PCI device during shutdown

Use managed disablement of PCI devices via pcim_device_enable().
Disables the PCI device and simplifies error rollback in probe
function.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210920141051.30988-3-tzimmermann@suse.de

drm/gma500: Replace references to dev_private with helper function

Replace most references to struct drm_device.dev_private with the new
helper function to_drm_psb_private(). The only references left are in
assignments and the helper itself.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210920141051.30988-2-tzimmermann@suse.de

drm/vboxvideo: Use managed interfaces for framebuffer write combining

Replace arch_phys_wc_add() with the rsp managed function. Allows for
removing the cleanup code for memory management

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916181601.9146-6-tzimmermann@suse.de

drm/mgag200: Use managed interfaces for framebuffer write combining

Replace arch_phys_wc_add() and arch_io_reserve_memtype_wc() with
the rsp managed functions. Allows for removing the cleanup code
for memory management

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916181601.9146-5-tzimmermann@suse.de

drm/ast: Use managed interfaces for framebuffer write combining

Replace arch_phys_wc_add() and arch_io_reserve_memtype_wc() with
the rsp managed functions. Allows for removing the cleanup code
for memory management

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916181601.9146-4-tzimmermann@suse.de

lib: devres: Add managed arch_io_reserve_memtype_wc()

Add devm_arch_io_reserve_memtype_wc() as managed wrapper around
arch_io_reserve_memtype_wc(). Useful for several graphics drivers
that set framebuffer memory to write combining.

v2:
* fix typo in commit description

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916181601.9146-3-tzimmermann@suse.de

lib: devres: Add managed arch_phys_wc_add()

Add devm_arch_phys_wc_add() as managed wrapper around arch_phys_wc_add().
Useful for several graphics drivers that set framebuffer memory to write
combining.

v2:
* fix typo in commit description

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916181601.9146-2-tzimmermann@suse.de

drm: Fix scaling_mode docs

Fix the bad copy-pasta in the scaling_mode docs.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210915142300.15631-1-ville.syrjala@linux.intel.com
Reviewed-by: Simon Ser <contact@emersion.fr>

drm/bridge: Move devm_drm_of_get_bridge to bridge/panel.c

By depending on devm_drm_panel_bridge_add(), devm_drm_of_get_bridge()
introduces a circular dependency between the modules drm (where
devm_drm_of_get_bridge() ends up) and drm_kms_helper (where
devm_drm_panel_bridge_add() is).

Fix this by moving devm_drm_of_get_bridge() to bridge/panel.c and thus
drm_kms_helper.

Fixes: 87ea95808d53 ("drm/bridge: Add a function to abstract away panels")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210917180925.2602266-1-maxime@cerno.tech

MAINTAINERS: fix typo in DRM DRIVER FOR SAMSUNG S6D27A1 PANELS

Commit ebd8cbf1fb96 ("drm/panel: s6d27a1: Add driver for Samsung S6D27A1
display panel") introduces a new section DRM DRIVER FOR SAMSUNG S6D27A1
PANELS with a minor typo in one of its file entries.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains:

  warning: no file matches  F:  driver/gpu/drm/panel/panel-samsung-s6d27a1.c

So, repair the entry and make get_maintainer.pl happy.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921122146.13132-1-lukas.bulwahn@gmail.com

drm/rockchip: remove of_match_ptr() from analogix dp driver

Kernel test robot throws below warning when CONFIG_OF
is not set.

>> drivers/gpu/drm/rockchip/analogix_dp-rockchip.c:457:34:
warning: unused variable 'rockchip_dp_dt_ids' [-Wunused-const-variable]
   static const struct of_device_id rockchip_dp_dt_ids[] = {

Fixed it by removing of_match_ptr().

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210607184836.3502-1-jrdr.linux@gmail.com

drm/rockchip: remove of_match_ptr() from vop_driver_dt_match

kernel test robot throws warning when CONFIG_OF not set.

>> drivers/gpu/drm/rockchip/rockchip_vop_reg.c:1038:34:
warning: unused variable 'vop_driver_dt_match' [-Wunused-const-variable]
   static const struct of_device_id vop_driver_dt_match[] = {

Fixed it by removing of_match_ptr().

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210607190800.3992-1-jrdr.linux@gmail.com

drm/rockchip: Check iommu itself instead of it's parent for device_is_available

When iommu itself is disabled in dts, we should
fallback to non-iommu buffer, check iommu parent
is meanless here.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210627084737.309163-1-andy.yan@rock-chips.com

drm/rockchip: dsi: make hstt_table static

This symbol is not used outside of dw-mipi-dsi-rockchip.c, so marks
it static.

Fix the following sparse warning:

drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c:646:13: warning: symbol
'hstt_table' was not declared. Should it be static?

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1628218664-14230-1-git-send-email-jiapeng.chong@linux.alibaba.com

drm/rockchip: dsi: Fix duplicate included linux/phy/phy.h

Clean up the following includecheck warning:

./drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c: linux/phy/phy.h is
included more than once.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 71f68fe7f121 ("drm/rockchip: dsi: add ability to work as a phy instead of full dsi")
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1629454729-108701-1-git-send-email-jiapeng.chong@linux.alibaba.com

drm/rockchip: Make use of the helper function devm_platform_ioremap_resource()

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831135721.4726-1-caihuoqing@baidu.com

drm/rockchip: add DRM_BRIDGE_ATTACH_NO_CONNECTOR flag to drm_bridge_attach

Commit a25b988ff83f ("drm/bridge: Extend bridge API to disable connector creation")
added DRM_BRIDGE_ATTACH_NO_CONNECTOR bridge flag and all bridges handle
this flag in some way since then.
Newly added bridge drivers must no longer contain the connector creation and
will fail probing if this flag isn't set.

In order to be able to connect to those newly added bridges as well,
make use of drm_bridge_connector API and have the connector initialized
by the display controller.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913125108.195704-1-knaerzche@gmail.com

drm/rockchip: handle non-platform devices in rockchip_drm_endpoint_is_subdriver

As discussed at [1] rockchip_drm_endpoint_is_subdriver will currently always
return -ENODEV for non-platform-devices (e.g. external i2c bridges), what
makes them never being considered in rockchip_rgb_init.

As suggested at [1] this additionally adds a of_device_is_available for
the node found, which will work for both platform and non-platform devices.
Also we can return early for non-platform-devices if they are enabled,
as rockchip_sub_drivers contains exclusively platform-devices.

[1] https://lore.kernel.org/all/20210316182753.GA25685@earth.li/

Suggested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914150756.85190-1-knaerzche@gmail.com

drm/rockchip: remove unused psr_list{,_lock}

Some leftover cleanup from commit 6c836d965bad ("drm/rockchip: Use the
helpers for PSR").

Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210915135007.1.I926ef5cef287047c35a17e363c919599c6ee6e4c@changeid

MAINTAINERS: add Andrey as the DRM GPU scheduler maintainer

Now that the scheduler is being used by more and more
drivers, we need someone to maintain it.  Andrey has
stepped up to maintain the scheduler.

Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: airlied@gmail.com
Cc: daniel.vetter@ffwll.ch
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210917161540.822282-2-alexander.deucher@amd.com

drm/panel-edp: Implement generic "edp-panel"s probed by EDID

As discussed in the patch ("dt-bindings: drm/panel-simple: Introduce
generic eDP panels") we can actually support probing eDP panels at
runtime instead of hardcoding what panel is connected. Add support to
the panel-edp driver for this.

We'll implement a solution like this:
* We'll read in two delays from the device tree that are used for
  powering up the panel the initial time (to read the EDID).
* In the EDID we can find a 32-bit ID that identifies what panel we've
  found. From this ID we can look up the full set of delays.

After this change we'll still need to add per-panel delays into the
panel-simple driver but we will no longer need to specify exactly
which panel is connected to which board in the device tree. Nicely,
any panels that are only supported this way also don't need to
hardcode mode data since it's guaranteed that we can get that through
the EDID.

This patch will seed the ID-to-delay table with a few panels that I
have access to, many of which are on sc7180-trogdor devices.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.15.Id9c96cba4eba3e5ee519bfb09cd64b39f2490293@changeid

drm/panel-edp: Don't re-read the EDID every time we power off the panel

The simple-panel driver is for panels that are not hot-pluggable at
runtime. Let's keep our cached EDID around until driver unload.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.14.Ib810fb3bebd0bd6763e4609e1a6764d06064081e@changeid

drm/panel-edp: Fix "prepare_to_enable" if panel doesn't handle HPD

While cleaning up the descriptions of the delay for eDP panels I
realized that we'd have a bug if any panels need the
"prepare_to_enable" but HPD handling isn't happening in the panel
driver. Let's put in a stopgap to at least make us not violate
timings. This is not perfectly optimal but trying to do better is
hard. At the moment only 2 panels specify this delay and only 30 ms is
at stake. These panels are also currently hooked up with "hpd-gpios"
so effectively this "fix" is just a theoretical fix and won't actually
do anything for any devices currently supported in mainline.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.13.Ia8288d36df4b12770af59ae3ff73ef7e08fb4e2e@changeid

drm/panel-edp: hpd_reliable shouldn't be subtraced from hpd_absent

Now that the delays are named / described with eDP-centric names, it
becomes clear that we should really specify the "hpd_reliable" and
"hpd_absent" separately without taking the other into account. Let's
fix it.

This should be a no-op change and just adjust how we specify
things. The actual delays should be the same before and after for the
one panel that currently species both "hpd_reliable" and "hpd_absent".

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.12.I2522235fca3aa6790ede0bf22a93d79a1f694e6b@changeid

drm/panel-edp: Better describe eDP panel delays

Now that the eDP panel driver only handles eDP panels we can make
better sense of the delays here. Let's describe them in terms of the
standard eDP timing diagram from the eDP spec.

As part of this, it becomes pretty clear that some eDP panels have too
long of a "hpd_reliable_delay". This used to be the "prepare"
delay. It's the fixed delay that we do in the panel driver after
powering on our panel before we look at the HPD signal. To understand
this better, first realize that there could be 3 paths we follow
depending on how HPD is hooked up. Let's walk through them:
1. HPD is handled by the eDP controller driver. Until "recently"
   (commit 48834e6084f1 ("drm/panel-simple: Support hpd-gpios for
   delaying prepare()") in May 2020) this was the only supported
   way. This is supposed to be when the controller driver gets HPD
   straight to a dedicated pin. In this case the controller driver
   should be waiting for HPD in its pre_enable() routine which should
   be called right after the panel's prepare() function is
   called. That means that the old "prepare" delay was only needed as
   a delay after powering the panel but before looking at HPD.
2. HPD is handled via hpd-gpios in the panel. This is much like #1 but
   much easier to follow since all the handling is in the panel
   driver.
3. The no-hpd case. This is also easy to follow.

In any case, even though it seems like some old panel data was using
this incorrectly, let's not touch the old data structures but we'll
add a note indicating that something seems off.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.11.I2d798dd015332661c5895ef744bc8ec5cd2e06ca@changeid

drm/panel-edp: Split the delay structure out

In the case where we can read an EDID for a panel the only part of the
panel description that can't be found directly from the EDID is the
description of the delays. Let's break the delay structure out so that
we can specify just the delays for panels that are detected by EDID.

This is simple code motion. No functional change is intended.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.10.I24f3646dd09954958645cc05c538909f169bf362@changeid

drm/panel-simple: Non-eDP panels don't need "HPD" handling

All of the "HPD" handling added to panel-simple recently was for eDP
panels. Remove it from panel-simple now that panel-edp handles eDP
panels. The "prepare_to_enable" delay only makes sense in the context
of HPD, so remove it too. No non-eDP panels used it anyway.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.9.I77d7a48df0a6585ef2cc2ff140fbe8f236a9a9f7@changeid

drm/panel-edp: Move some wayward panels to the eDP driver

Not all panels in panel-simple were marked what type of panel they
were. I searched through ARM/ARM64 Chromebooks or Chromebook-related
reference boards that I was aware of and found some panels that needed
to be moved. I also skimmed for panels that had no mode and were "big"
since it's quite rare to see a small eDP panel. Here's what I found:
* auo,b101ean01 - rk3288-veyron-minnie
* auo,b133htn01 - exynos5800-peach-pi
* auo,b133xtn01 - tegra124-nyan-big
* boe,nv101wxmn51 - rk3399-gru-bob
* innolux,p120zdg-bf1 - sdm845-cheza
* lg,lp079qx1-sp0v - rk3399-evb and similar
* lg,lp097qx1-spa1 - According to commit 0355dde26e52 ("drm/panel:
  simple: Add support for LG LP097QX1-SPA1 panel") this is an eDP
  panel.
* lg,lp129qe - tegra124-venice2
* samsung,lsn122dl01-c01 - According to commit 0330eaf39082
  ("drm/panel: simple: Add support for Samsung LSN122DL01-C01 panel")
  this is an eDP panel.
* samsung,ltn140at29-301 - tegra124-nyan-blaze
* sharp,ld-d5116z01b - According to commit cd5e1cbe1f0a ("drm/panel:
  simple: Add support for Sharp LD-D5116Z01B panel") this is an eDP
  panel.
* sharp,lq123p1jx31 - rk3399-gru-kevin
* starry,kr122ea0sra - rk3399-gru-gru (reference board, not upstream)

I won't promise that I didn't miss a single panel, but that's fairly
complete I think.

I'm not sure the full impact of the fact that they didn't have the
connector type specified, but at least as of commit 9f069c6fbc72
("drm/panel: panel-simple: add default connector_type") we may have
been accidentally thinking of them as DPI panels. We also would
certainly have had a warning. In any case since we don't want to
support anything eDP in the old simple-panel driver, we should move
these.

Cc: Yakir Yang <ykk@rock-chips.com>
Cc: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.8.I84e36f9f86d5d693fce0641a55ddb264a518a947@changeid

drm/panel-edp: Split eDP panels out of panel-simple

The panel-simple driver handles way too much. Let's start trying to
get a handle on it by splitting out the eDP panels. This patch does
this:

1. Start by copying simple-panel verbatim over to a new driver,
   simple-panel-edp.
2. Rename "panel_simple" to "panel_edp" in the new driver.
3. Keep only panels marked with `DRM_MODE_CONNECTOR_eDP` in the new
   driver. Remove those panels from the old driver.
4. Remove all recent "DP AUX bus" stuff from the old driver. The DP
   AUX bus is only possible on DP panels.
5. Remove all DSI / MIPI related functions from the new driver.
6. Remove bus_format / bus_flags from eDP driver. These things don't
   seem to make any sense for eDP panels so let's stop filling in made
   up stuff.

In the end we end up with a bunch of duplicated code for now. Future
patches will try to address _some_ of this duplicated code though some
of it will be unavoidable.

NOTE: This may not actually move all eDP panels over to the new driver
since not all panels were properly marked with
`DRM_MODE_CONNECTOR_eDP`. A future patch will attempt to move wayward
panels I could identify but even so there may be some missed.

Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.7.I0a2f75bb822d17ce06f5b147734764eeb0c3e3df@changeid

arm64: defconfig: Everyone who had PANEL_SIMPLE now gets PANEL_EDP

In the patch ("drm/panel-simple-edp: Split eDP panels out of
panel-simple") we split the PANEL_SIMPLE driver in 2. Let's enable the
new config.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.6.Ied5c4da3ea36f8c49343176eda342027b6f19586@changeid

ARM: configs: Everyone who had PANEL_SIMPLE now gets PANEL_EDP

In the patch ("drm/panel-simple-edp: Split eDP panels out of
panel-simple") we will split the PANEL_SIMPLE driver in two. By
default let's give everyone who had the old driver enabled the new
driver too. If folks want to opt-out of one or the other they always
can later.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.5.I02250cd7d4799661b068bcc65849a456ed411734@changeid

drm/edid: Use new encoded panel id style for quirks matching

In the patch ("drm/edid: Allow the querying/working with the panel ID
from the EDID") we introduced a different way of working with the
panel ID stored in the EDID. Let's use this new way for the quirks
code.

Advantages of the new style:
* Smaller data structure size. Saves 4 bytes per panel.
* Iterate through quirks structure with just "==" instead of strncmp()
* In-kernel storage is more similar to what's stored in the EDID
  itself making it easier to grok that they are referring to the same
  value.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.4.I6103ce2b16e5e5a842b14c7022a034712b434609@changeid

drm/edid: Allow querying/working with the panel ID from the EDID

EDIDs have 32-bits worth of data which is intended to be used to
uniquely identify the make/model of a panel. This has historically
been used only internally in the EDID processing code to identify
quirks with panels.

We'd like to use this panel ID in panel drivers to identify which
panel is hooked up and from that information figure out power sequence
timings. Let's expose this information from the EDID code and also
allow it to be accessed early, before a connector has been created.

To make matching in the panel drivers code easier, we'll return the
panel ID as a 32-bit value. We'll provide some functions for
converting this value back and forth to something more human readable.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.3.I4a672175ba1894294d91d3dbd51da11a8239cf4a@changeid

drm/edid: Break out reading block 0 of the EDID

A future change wants to be able to read just block 0 of the EDID, so
break it out of drm_do_get_edid() into a sub-function.

This is intended to be a no-op change--just code movement.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.2.I62e76a034ac78c994d40a23cd4ec5aeee56fa77c@changeid

dt-bindings: drm/panel-simple-edp: Introduce generic eDP panels

eDP panels generally contain almost everything needed to control them
in their EDID. This comes from their DP heritage were a computer needs
to be able to properly control pretty much any DP display that's
plugged into it.

The one big issue with eDP panels and the reason that we need a panel
driver for them is that the power sequencing can be different per
panel.

While it is true that eDP panel sequencing can be arbitrarily complex,
in practice it turns out that many eDP panels are compatible with just
some slightly different delays. See the contents of the bindings file
introduced in this patch for some details.

The fact that eDP panels are 99% probable and that the power
sequencing (especially power up) can be compatible between many panels
means that there's a constant desire to plug multiple different panels
into the same board. This could be for second sourcing purposes or to
support multiple SKUs (maybe a 11" and a 13", for instance).

As discussed [1], it should be OK to support this by adding two
properties to the device tree to specify the delays needed for
powering up the panel the first time. We'll create a new "edp-panel"
bindings file and define the two delays that might need to be
specified. NOTE: in the vast majority of the cases (HPD is hooked up
and isn't glitchy or is debounced) even these delays aren't needed.

[1] https://lore.kernel.org/r/CAD=FV=VZYOMPwQZzWdhJGh5cjJWw_EcM-wQVEivZ-bdGXjPrEQ@mail.gmail.com

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.1.I1116e79d34035338a45c1fc7cdd14a097909c8e0@changeid

drm/panfrost: simplify getting .driver_data

We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210920090522.23784-6-wsa+renesas@sang-engineering.com

panfrost: make mediatek_mt8183_supplies and mediatek_mt8183_pm_domains static

This symbol is not used outside of panfrost_drv.c, so marks it static.

Fix the following sparse warning:

drivers/gpu/drm/panfrost/panfrost_drv.c:641:12: warning: symbol
'mediatek_mt8183_supplies' was not declared. Should it be static?

drivers/gpu/drm/panfrost/panfrost_drv.c:642:12: warning: symbol
'mediatek_mt8183_pm_domains' was not declared. Should it be static?

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1631956414-85412-1-git-send-email-jiapeng.chong@linux.alibaba.com

drm/v3d: Make use of the helper function devm_platform_ioremap_resource_byname()

Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210901112941.31320-1-caihuoqing@baidu.com

drm: bridge: it66121: Fix return value it66121_probe

Currently it66121_probe returns -EPROBE_DEFER if the there is no remote
endpoint found in the device tree which doesn't seem helpful, since this
is not going to change later and it is never checked if the next bridge
has been initialized yet. It will fail in that case later while doing
drm_bridge_attach for the next bridge in it66121_bridge_attach.

Since the bindings documentation for it66121 bridge driver states
there has to be a remote endpoint defined, its safe to return -EINVAL
in that case.
This additonally adds a check, if the remote endpoint is enabled and
returns -EPROBE_DEFER, if the remote bridge hasn't been initialized
(yet).

Fixes: 988156dc2fc9 ("drm: bridge: add it66121 driver")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210918140420.231346-1-knaerzche@gmail.com

drm/v3d: fix sched job resources cleanup when a job is aborted

In a cl submission, when bin job initialization fails, sched job resources
were already allocated for the render job. At this point,
drm_sched_job_init(render) was done in v3d_job_init but the render job is
aborted before drm_sched_job_arm (in v3d_job_push) happens; therefore, not
only v3d_job_put but also drm_sched_job_cleanup should be called (by
v3d_job_cleanup). A similar issue is addressed for csd and tfu submissions.

The issue was noticed from a review by Iago Toral in a patch that touches
the same part of the code.

Fixes: 916044fac8623 ("drm/v3d: Move drm_sched_job_init to v3d_job_init")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916212726.2u2psq2egwy2mdva@mail.igalia.com

drm/panfrost: Calculate lock region size correctly

It turns out that when locking a region, the region must be a naturally
aligned power of 2. The upshot of this is that if the desired region
crosses a 'large boundary' the region size must be increased
significantly to ensure that the locked region completely covers the
desired region. Previous calculations (including in kbase for the
proprietary driver) failed to take this into account.

Since it's known that the lock region must be naturally aligned we can
compute the required size by looking at the highest bit position which
changes between the start/end of the lock region (subtracting 1 from the
end because the end address is exclusive). The start address is then
aligned based on the size (this is technically unnecessary as the
hardware will ignore these bits, but the spec advises to do this "to
avoid confusion").

Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210903094957.74560-1-steven.price@arm.com

virtio-gpu: fix possible memory allocation failure

When kmem_cache_zalloc in virtio_gpu_get_vbuf fails, it will return
an error code. But none of its callers checks this error code, and
a core dump will take place.

Considering many of its callers can't handle such error, I add
a __GFP_NOFAIL flag when calling kmem_cache_zalloc to make sure
it won't fail, and delete those unused error handlings.

Fixes: dc5698e80cf724 ("Add virtio gpu driver.")
Signed-off-by: Yuntao Liu <liuyuntao10@huawei.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210828104321.3410312-1-liuyuntao10@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/sun4i: dw-hdmi: Make use of the helper function dev_err_probe()

When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916105633.12162-1-caihuoqing@baidu.com

drm/sun4i: dsi: Make use of the helper function dev_err_probe()

When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210916105625.12109-1-caihuoqing@baidu.com

drm/v3d: fix wait for TMU write combiner flush

The hardware sets the TMUWCF bit back to 0 when the TMU write
combiner flush completes so we should be checking for that instead
of the L2TFLS bit.

v2 (Melissa Wen):
  - Add Signed-off-by and Fixes tags.
  - Change the error message for the timeout to be more clear.

Fixes spurious Vulkan CTS failures in:
dEQP-VK.binding_model.descriptorset_random.*

Fixes: d223f98f02099 ("drm/v3d: Add support for compute shader dispatch.")
Signed-off-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210915100507.3945-1-itoral@igalia.com

drm/sched: fix the bug of time out calculation(v4)

issue:
in cleanup_job the cancle_delayed_work will cancel a TO timer
even the its corresponding job is still running.

fix:
do not cancel the timer in cleanup_job, instead do the cancelling
only when the heading job is signaled, and if there is a "next" job
we start_timeout again.

v2:
further cleanup the logic, and do the TDR timer cancelling if the signaled job
is the last one in its scheduler.

v3:
change the issue description
remove the cancel_delayed_work in the begining of the cleanup_job
recover the implement of drm_sched_job_begin.

v4:
remove the kthread_should_park() checking in cleanup_job routine,
we should cleanup the signaled job asap

TODO:
1)introduce pause/resume scheduler in job_timeout to serial the handling
of scheduler and job_timeout.
2)drop the bad job's del and insert in scheduler due to above serialization
(no race issue anymore with the serialization)

Tested-by: jingwen <jingwen.chen@@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1630457207-13107-1-git-send-email-Monk.Liu@amd.com

drm/ttm: fix the type mismatch error on sparc64

__fls() on sparc64 return "int", but here it is expected as "unsigned
long" (x86). It will cause the build errors because the warning becomes
fatal while it is using sparc configuration. As suggested by Linus, it
can use min_t instead of min to force the type as "unsigned int".

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210907100302.3684453-1-ray.huang@amd.com

drm/bochs: add Bochs PCI ID for Simics model

Current (and older) Simics models for the Bochs VGA used the wrong PCI
vendor ID (0x4321 instead of 0x1234).  Although this can hopefully be
fixed in the future, it is a problem for users of the current version,
not the least because to update the device ID the BIOS has to be
rebuilt in order to see BIOS output.

Add support for the 4321:1111 device number in addition to the
1234:1111 one.

Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210910010655.2356245-1-hpa@zytor.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/qxl: User page size macro for qxl release bo

Some architectures have different default page size, this patch
replaces hardcoded 4096 with PAGE_SIZE macro, since cmd bo size
is page aligned.

Signed-off-by: bibo mao <maobibo@loongson.cn>
Link: http://patchwork.freedesktop.org/patch/msgid/20210914062352.6102-1-maobibo@loongson.cn
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

dma-buf: system_heap: Avoid warning on mid-order allocations

When trying to do mid-order allocations, set __GFP_NOWARN to
avoid warning messages if the allocation fails, as we will
still fall back to single page allocatitions in that case.
This is the similar to what we already do for large order
allocations.

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Liam Mark <lmark@codeaurora.org>
Cc: Chris Goldsworthy <cgoldswo@codeaurora.org>
Cc: Laura Abbott <labbott@kernel.org>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Ørjan Eide <orjan.eide@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: James Jones <jajones@nvidia.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909023741.2592429-1-john.stultz@linaro.org

drm/vc4: dsi: Switch to devm_drm_of_get_bridge

The new devm_drm_of_get_bridge removes most of the boilerplate we
have to deal with. Let's switch to it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910130941.1740182-4-maxime@cerno.tech

drm/vc4: dpi: Switch to devm_drm_of_get_bridge

The new devm_drm_of_get_bridge removes most of the boilerplate we
have to deal with. Let's switch to it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910130941.1740182-3-maxime@cerno.tech

drm/bridge: Add a function to abstract away panels

Display drivers so far need to have a lot of boilerplate to first
retrieve either the panel or bridge that they are connected to using
drm_of_find_panel_or_bridge(), and then either deal with each with ad-hoc
functions or create a drm panel bridge through drm_panel_bridge_add.

In order to reduce the boilerplate and hopefully create a path of least
resistance towards using the DRM panel bridge layer, let's create the
function devm_drm_of_get_bridge() to reduce that boilerplate.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210910130941.1740182-2-maxime@cerno.tech

Merge drm/drm-next into drm-misc-next

Kickstart new drm-misc-next cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/ttm: Try to check if new ttm man out of bounds during compile

Allow TTM know if vendor set new ttm mananger out of bounds by adding
build_bug_on.

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913080950.180752-1-xinhui.pan@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/meson: Make use of the helper function devm_platform_ioremap_resourcexxx()

Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831135644.4576-1-caihuoqing@baidu.com

Linux 5.15-rc1

Merge tag 'perf-tools-for-v5.15-2021-09-11' of git://git./linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:

 - Add missing fields and remove some duplicate fields when printing a
   perf_event_attr.

 - Fix hybrid config terms list corruption.

 - Update kernel header copies, some resulted in new kernel features
   being automagically added to 'perf trace' syscall/tracepoint argument
   id->string translators.

 - Add a file generated during the documentation build to .gitignore.

 - Add an option to build without libbfd, as some distros, like Debian
   consider its ABI unstable.

 - Add support to print a textual representation of IBS raw sample data
   in 'perf report'.

 - Fix bpf 'perf test' sample mismatch reporting

 - Fix passing arguments to stackcollapse report in a 'perf script'
   python script.

 - Allow build-id with trailing zeros.

 - Look for ImageBase in PE file to compute .text offset.

* tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits)
  tools headers UAPI: Update tools's copy of drm.h headers
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Sync linux/fs.h with the kernel sources
  tools headers UAPI: Sync linux/in.h copy with the kernel sources
  perf tools: Add an option to build without libbfd
  perf tools: Allow build-id with trailing zeros
  perf tools: Fix hybrid config terms list corruption
  perf tools: Factor out copy_config_terms() and free_config_terms()
  perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields
  perf tools: Ignore Documentation dependency file
  perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions
  tools include UAPI: Update linux/mount.h copy
  perf beauty: Cover more flags in the  move_mount syscall argument beautifier
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools include UAPI: Sync sound/asound.h copy with the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
  perf report: Add support to print a textual representation of IBS raw sample data
  perf report: Add tools/arch/x86/include/asm/amd-ibs.h
  perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings
  ...

Merge tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux

Pull compiler attributes updates from Miguel Ojeda:

 - Fix __has_attribute(__no_sanitize_coverage__) for GCC 4 (Marco Elver)

 - Add Nick as Reviewer for compiler_attributes.h (Nick Desaulniers)

 - Move __compiletime_{error|warning} (Nick Desaulniers)

* tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux:
  compiler_attributes.h: move __compiletime_{error|warning}
  MAINTAINERS: add Nick as Reviewer for compiler_attributes.h
  Compiler Attributes: fix __has_attribute(__no_sanitize_coverage__) for GCC 4

Merge tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux

Pull auxdisplay updates from Miguel Ojeda:
 "An assortment of improvements for auxdisplay:

   - Replace symbolic permissions with octal permissions (Jinchao Wang)

   - ks0108: Switch to use module_parport_driver() (Andy Shevchenko)

   - charlcd: Drop unneeded initializers and switch to C99 style (Andy
     Shevchenko)

   - hd44780: Fix oops on module unloading (Lars Poeschel)

   - Add I2C gpio expander example (Ralf Schlatterbeck)"

* tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux:
  auxdisplay: Replace symbolic permissions with octal permissions
  auxdisplay: ks0108: Switch to use module_parport_driver()
  auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style
  auxdisplay: hd44780: Fix oops on module unloading
  auxdisplay: Add I2C gpio expander example

Merge tag 'smp-urgent-2021-09-12' of git://git./linux/kernel/git/tip/tip

Pull CPU hotplug updates from Thomas Gleixner:
 "Updates for the SMP and CPU hotplug:

   - Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the
     original hotplug code and now causing trouble with the ARM64 cache
     topology setup due to the pointless SMP function call.

     It's not longer required as the hotplug callbacks are guaranteed to
     be invoked on the upcoming CPU.

   - Remove the deprecated and now unused CPU hotplug functions

   - Rewrite the CPU hotplug API documentation"

* tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation: core-api/cpuhotplug: Rewrite the API section
  cpu/hotplug: Remove deprecated CPU-hotplug functions.
  thermal: Replace deprecated CPU-hotplug functions.
  drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()

Merge tag 'char-misc-5.15-rc1-lkdtm' of git://git./linux/kernel/git/gregkh/char-misc

Pull misc driver fix from Greg KH:
 "Here is a single patch for 5.15-rc1, for the lkdtm misc driver.

  It resolves a build issue that many people were hitting with your
  current tree, and Kees and others felt would be good to get merged
  before -rc1 comes out, to prevent them from having to constantly hit
  it as many development trees restart on -rc1, not older -rc releases.

  It has NOT been in linux-next, but has passed 0-day testing and looks
  'obviously correct' when reviewing it locally :)"

* tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  lkdtm: Use init_uts_ns.name instead of macros

Merge tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi

Pull IPMI updates from Corey Minyard:
 "A couple of very minor fixes for style and rate limiting.

  Nothing big, but probably needs to go in"

* tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi:
  char: ipmi: use DEVICE_ATTR helper macro
  ipmi: rate limit ipmi smi_event failure message

Merge tag 'sched_urgent_for_v5.15_rc1' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Borislav Petkov:

 - Make sure the idle timer expires in hardirq context, on PREEMPT_RT

 - Make sure the run-queue balance callback is invoked only on the
   outgoing CPU

* tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Prevent balance_push() on remote runqueues
  sched/idle: Make the idle timer expire in hard interrupt context

Merge tag 'locking_urgent_for_v5.15_rc1' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Borislav Petkov:

 - Fix the futex PI requeue machinery to not return to userspace in
   inconsistent state

 - Avoid a potential null pointer dereference in the ww_mutex deadlock
   check

 - Other smaller cleanups and optimizations

* tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rtmutex: Fix ww_mutex deadlock check
  futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic()
  futex: Avoid redundant task lookup
  futex: Clarify comment for requeue_pi_wake_futex()
  futex: Prevent inconsistent state and exit race
  futex: Return error code instead of assigning it without effect
  locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT

Merge tag 'timers_urgent_for_v5.15_rc1' of git://git./linux/kernel/git/tip/tip

Pull timer fix from Borislav Petkov:

 - Handle negative second values properly when converting a timespec64
   to nanoseconds.

* tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Handle negative seconds correctly in timespec64_to_ns()

Merge branch 'misc.namei' of git://git./linux/kernel/git/viro/vfs

Pull namei updates from Al Viro:
 "Clearing fallout from mkdirat in io_uring series. The fix in the
  kern_path_locked() patch plus associated cleanups"

* 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  putname(): IS_ERR_OR_NULL() is wrong here
  namei: Standardize callers of filename_create()
  namei: Standardize callers of filename_lookup()
  rename __filename_parentat() to filename_parentat()
  namei: Fix use after free in kern_path_locked

Merge tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6

Pull smbfs updates from Steve French:
 "cifs/smb3 updates:

   - DFS reconnect fix

   - begin creating common headers for server and client

   - rename the cifs_common directory to smbfs_common to be more
     consistent ie change use of the name cifs to smb (smb3 or smbfs is
     more accurate, as the very old cifs dialect has long been
     superseded by smb3 dialects).

  In the future we can rename the fs/cifs directory to fs/smbfs.

  This does not include the set of multichannel fixes nor the two
  deferred close fixes (they are still being reviewed and tested)"

* tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: properly invalidate cached root handle when closing it
  cifs: move SMB FSCTL definitions to common code
  cifs: rename cifs_common to smbfs_common
  cifs: update FSCTL definitions

drm/panel-orientation-quirks: add Valve Steam Deck

Valve's Steam Deck has a 800x1280 LCD screen.

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Jared Baldridge <jrb@expunge.us>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210911102430.253986-1-contact@emersion.fr

drm: panel-orientation-quirks: Add quirk for the Chuwi HiBook

The Chuwi HiBook uses a panel which has been mounted
90 degrees rotated. Add a quirk for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210905130501.32980-1-hdegoede@redhat.com

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio updates from Michael Tsirkin:

 - vduse driver ("vDPA Device in Userspace") supporting emulated virtio
   block devices

 - virtio-vsock support for end of record with SEQPACKET

 - vdpa: mac and mq support for ifcvf and mlx5

 - vdpa: management netlink for ifcvf

 - virtio-i2c, gpio dt bindings

 - misc fixes and cleanups

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
  Documentation: Add documentation for VDUSE
  vduse: Introduce VDUSE - vDPA Device in Userspace
  vduse: Implement an MMU-based software IOTLB
  vdpa: Support transferring virtual addressing during DMA mapping
  vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
  vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
  vhost-iotlb: Add an opaque pointer for vhost IOTLB
  vhost-vdpa: Handle the failure of vdpa_reset()
  vdpa: Add reset callback in vdpa_config_ops
  vdpa: Fix some coding style issues
  file: Export receive_fd() to modules
  eventfd: Export eventfd_wake_count to modules
  iova: Export alloc_iova_fast() and free_iova_fast()
  virtio-blk: remove unneeded "likely" statements
  virtio-balloon: Use virtio_find_vqs() helper
  vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
  vsock_test: update message bounds test for MSG_EOR
  af_vsock: rename variables in receive loop
  virtio/vsock: support MSG_EOR bit processing
  vhost/vsock: support MSG_EOR bit processing
  ...

Merge tag 'riscv-for-linus-5.15-mw1' of git://git./linux/kernel/git/riscv/linux

Pull more RISC-V updates from Palmer Dabbelt:

 - A pair of defconfig additions, for NVMe and the EFI filesystem
   localization options.

 - A larger address space for stack randomization.

 - A cleanup to our install rules.

 - A DTS update for the Microchip Icicle board, to fix the serial
   console.

 - Support for build-time table sorting, which allows us to have
   __ex_table read-only.

* tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Move EXCEPTION_TABLE to RO_DATA segment
  riscv: Enable BUILDTIME_TABLE_SORT
  riscv: dts: microchip: mpfs-icicle: Fix serial console
  riscv: move the (z)install rules to arch/riscv/Makefile
  riscv: Improve stack randomisation on RV64
  riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1
  riscv: defconfig: enable BLK_DEV_NVME

Merge branch 'for-5.15' of git://git./linux/kernel/git/jlawall/linux

Pull coccinelle updates from Julia Lawall:
 "These changes update some existing semantic patches with
  respect to some recent changes in the kernel.

  Specifically, the change to kvmalloc.cocci searches for
  kfree_sensitive rather than kzfree, and the change to
  use_after_iter.cocci adds list_entry_is_head as a valid
  use of a list iterator index variable after the end of
  the loop"

* 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
  scripts: coccinelle: allow list_entry_is_head() to use pos
  coccinelle: api: rename kzfree to kfree_sensitive

tools headers UAPI: Update tools's copy of drm.h headers

Picking the changes from:

  17ce9c61c71cbc0d ("drm: document DRM_IOCTL_MODE_RMFB")

Doesn't result in any tooling changes:

  $ tools/perf/trace/beauty/drm_ioctl.sh  > before
  $ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
  $ tools/perf/trace/beauty/drm_ioctl.sh  > after
  $ diff -u before after

Silencing these perf build warnings:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
  diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h

Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync drm/i915_drm.h with the kernel sources

To pick the changes in:

  b65a9489730a2494 ("drm/i915/userptr: Probe existence of backing struct pages upon creation")
  ee242ca704d38699 ("drm/i915/guc: Implement GuC priority management")
  81340cf3bddded4f ("drm/i915/uapi: reject set_domain for discrete")
  7961c5b60f23dff5 ("drm/i915: Add TTM offset argument to mmap.")
  aef7b67a79564f6c ("drm/i915/uapi: convert drm_i915_gem_userptr to kernel doc")
  e7737b67ab46ee0e ("drm/i915/uapi: reject caching ioctls for discrete")
  3aa8c57fe25a9247 ("drm/i915/uapi: convert drm_i915_gem_set_domain to kernel doc")
  289f5a72009b8f67 ("drm/i915/uapi: convert drm_i915_gem_caching to kernel doc")
  4a766ae40ec83301 ("drm/i915: Drop the CONTEXT_CLONE API (v2)")
  6ff6d61dd2a943bd ("drm/i915: Drop I915_CONTEXT_PARAM_NO_ZEROMAP")
  fe4751c3d513ff4f ("drm/i915: Drop I915_CONTEXT_PARAM_RINGSIZE")
  577729533cdc4e37 ("drm/i915: Document the Virtual Engine uAPI")
  c649432e86ca677d ("drm/i915: Fix busy ioctl commentary")

That doesn't result in any changes to tooling as no new ioctl were
added (at least not perceived by tools/perf/trace/beauty/drm_ioctl.sh).

Addressing this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
  diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync linux/fs.h with the kernel sources

To pick the change in:

  7957d93bf32bc211 ("block: add ioctl to read the disk sequence number")

It adds a new ioctl, but we are still not using that to generate tables
for 'perf trace', so no changes in tooling.

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
  diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync linux/in.h copy with the kernel sources

To pick the changes in:

  db243b796439c0ca ("net/ipv4/ipv6: Replace one-element arraya with flexible-array members")
  2d3e5caf96b9449a ("net/ipv4: Replace one-element array with flexible-array member")

That don't result in any change in tooling, the structs changed remains
with the same layout.

This addresses this build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
  diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h

Cc: David S. Miller <davem@davemloft.net>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add an option to build without libbfd

Some distributions, like debian, don't link perf with libbfd. Add a
build flag to make this configuration buildable and testable.

This was inspired by:

  https://lore.kernel.org/linux-perf-users/20210910102307.2055484-1-tonyg@leastfixedpoint.com/T/#u

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: tony garnock-jones <tonyg@leastfixedpoint.com>
Link: http://lore.kernel.org/lkml/20210910225756.729087-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Allow build-id with trailing zeros

Currently perf saves a build-id with size but old versions assumes the
size of 20.  In case the build-id is less than 20 (like for MD5), it'd
fill the rest with 0s.

I saw a problem when old version of perf record saved a binary in the
build-id cache and new version of perf reads the data.  The symbols
should be read from the build-id cache (as the path no longer has the
same binary) but it failed due to mismatch in the build-id.

  symsrc__init: build id mismatch for /home/namhyung/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf.

The build-id event in the data has 20 byte build-ids, but it saw a
different size (16) when it reads the build-id of the elf file in the
build-id cache.

  $ readelf -n ~/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf

  Displaying notes found in: .note.gnu.build-id
    Owner                Data size  Description
    GNU                  0x00000010 NT_GNU_BUILD_ID (unique build ID bitstring)
      Build ID: 53e4c2f42a4c61a2d632d92a72afa08f

Let's fix this by allowing trailing zeros if the size is different.

Fixes: 39be8d0115b321ed ("perf tools: Pass build_id object to dso__build_id_equal()")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210910224630.1084877-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix hybrid config terms list corruption

A config terms list was spliced twice, resulting in a never-ending loop
when the list was traversed. Fix by using list_splice_init() and copying
and freeing the lists as necessary.

This patch also depends on patch "perf tools: Factor out
copy_config_terms() and free_config_terms()"

Example on ADL:

 Before:

  # perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname &
  # jobs
  [1]+  Running                    perf record -e "{intel_pt//,cycles/aux-sample-size=4096/pp}" uname
  # perf top -E 10
    PerfTop:    4071 irqs/sec  kernel: 6.9%  exact: 100.0% lost: 0/0 drop: 0/0 [4000Hz cycles],  (all, 24 CPUs)
  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    97.60%  perf           [.] __evsel__get_config_term
     0.25%  [kernel]       [k] kallsyms_expand_symbol.constprop.13
     0.24%  perf           [.] kallsyms__parse
     0.15%  [kernel]       [k] _raw_spin_lock
     0.14%  [kernel]       [k] number
     0.13%  [kernel]       [k] advance_transaction
     0.08%  [kernel]       [k] format_decode
     0.08%  perf           [.] map__process_kallsym_symbol
     0.08%  perf           [.] rb_insert_color
     0.08%  [kernel]       [k] vsnprintf
  exiting.
  # kill %1

After:

  # perf record -e '{intel_pt//,cycles/aux-sample-size=4096/pp}' uname &
  Linux
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.060 MB perf.data ]
  # perf script | head
       perf-exec   604 [001]  1827.312293:                            psb:  psb offs: 0                       ffffffffb8415e87 pt_config_start+0x37 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb856a3bd event_sched_in.isra.133+0xfd ([kernel.kallsyms]) => ffffffffb856a9a0 perf_pmu_nop_void+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb856b10e merge_sched_in+0x26e ([kernel.kallsyms]) => ffffffffb856a2c0 event_sched_in.isra.133+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb856a45d event_sched_in.isra.133+0x19d ([kernel.kallsyms]) => ffffffffb8568b80 perf_event_set_state.part.61+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb8568b86 perf_event_set_state.part.61+0x6 ([kernel.kallsyms]) => ffffffffb85662a0 perf_event_update_time+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb856a35c event_sched_in.isra.133+0x9c ([kernel.kallsyms]) => ffffffffb8567610 perf_log_itrace_start+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb856a377 event_sched_in.isra.133+0xb7 ([kernel.kallsyms]) => ffffffffb8403b40 x86_pmu_add+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb8403b86 x86_pmu_add+0x46 ([kernel.kallsyms]) => ffffffffb8403940 collect_events+0x0 ([kernel.kallsyms])
       perf-exec   604  1827.312293:          1                       branches:  ffffffffb8403a7b collect_events+0x13b ([kernel.kallsyms]) => ffffffffb8402cd0 collect_event+0x0 ([kernel.kallsyms])

Fixes: 30def61f64bac5 ("perf parse-events Create two hybrid cache events")
Fixes: 94da591b1c7913 ("perf parse-events Create two hybrid raw events")
Fixes: 9cbfa2f64c04d9 ("perf parse-events Create two hybrid hardware events")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https //lore.kernel.org/r/20210909125508.28693-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Factor out copy_config_terms() and free_config_terms()

Factor out copy_config_terms() and free_config_terms() so that they can
be reused.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https //lore.kernel.org/r/20210909125508.28693-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields

Some fields are missing and text_poke is duplicated. Fix that up.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210911120550.12203-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Ignore Documentation dependency file

When building directly on the checked out repository the build process
produces a file that should be ignored, so add it to .gitignore.

Fixes: a81df63a5df3e195 ("perf doc: Fix doc.dep")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210910232249.739661-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'io_uring-5.15-2021-09-11' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:

 - Fix an off-by-one in a BUILD_BUG_ON() check. Not a real issue right
   now as we have plenty of flags left, but could become one. (Hao)

 - Fix lockdep issue introduced in this merge window (me)

 - Fix a few issues with the worker creation (me, Pavel, Qiang)

 - Fix regression with wq_has_sleeper() for IOPOLL (Pavel)

 - Timeout link error propagation fix (Pavel)

* tag 'io_uring-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
  io_uring: fix off-by-one in BUILD_BUG_ON check of __REQ_F_LAST_BIT
  io_uring: fail links of cancelled timeouts
  io-wq: fix memory leak in create_io_worker()
  io-wq: fix silly logic error in io_task_work_match()
  io_uring: drop ctx->uring_lock before acquiring sqd->lock
  io_uring: fix missing mb() before waitqueue_active
  io-wq: fix cancellation on create-worker failure

Merge tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - NVMe pull request from Christoph:
     - fix nvmet command set reporting for passthrough controllers (Adam Manzanares)
     - update a MAINTAINERS email address (Chaitanya Kulkarni)
     - set QUEUE_FLAG_NOWAIT for nvme-multipth (me)
     - handle errors from add_disk() (Luis Chamberlain)
     - update the keep alive interval when kato is modified (Tatsuya Sasaki)
     - fix a buffer overrun in nvmet_subsys_attr_serial (Hannes Reinecke)
     - do not reset transport on data digest errors in nvme-tcp (Daniel Wagner)
     - only call synchronize_srcu when clearing current path (Daniel Wagner)
     - revalidate paths during rescan (Hannes Reinecke)

 - Split out the fs/block_dev into block/fops.c and block/bdev.c, which
   has been long overdue. Do this now before -rc1, to avoid annoying
   conflicts due to this (Christoph)

 - blk-throtl use-after-free fix (Li)

 - Improve plug depth for multi-device plugs, greatly increasing md
   resync performance (Song)

 - blkdev_show() locking fix (Tetsuo)

 - n64cart error check fix (Yang)

* tag 'block-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
  n64cart: fix return value check in n64cart_probe()
  blk-mq: allow 4x BLK_MAX_REQUEST_COUNT at blk_plug for multiple_queues
  block: move fs/block_dev.c to block/bdev.c
  block: split out operations on block special files
  blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()
  block: genhd: don't call blkdev_show() with major_names_lock held
  nvme: update MAINTAINERS email address
  nvme: add error handling support for add_disk()
  nvme: only call synchronize_srcu when clearing current path
  nvme: update keep alive interval when kato is modified
  nvme-tcp: Do not reset transport on data digest errors
  nvmet: fixup buffer overrun in nvmet_subsys_attr_serial()
  nvmet: return bool from nvmet_passthru_ctrl and nvmet_is_passthru_req
  nvmet: looks at the passthrough controller when initializing CAP
  nvme: move nvme_multi_css into nvme.h
  nvme-multipath: revalidate paths during rescan
  nvme-multipath: set QUEUE_FLAG_NOWAIT

Merge tag 'libata-5.15-2021-09-11' of git://git.kernel.dk/linux-block

Pull libata maintainer update from Jens Axboe:
 "Damien agreed to take over maintainership of libata, and he would be a
  great candidate for it. Update the MAINTAINERS entry to reflect the
  change in maintainer and git tree"

* tag 'libata-5.15-2021-09-11' of git://git.kernel.dk/linux-block:
  libata: pass over maintainership to Damien Le Moal

Merge tag 'trace-v5.15-3' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "Minor fixes to the processing of the bootconfig tree"

* tag 'trace-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  bootconfig: Rename xbc_node_find_child() to xbc_node_find_subkey()
  tracing/boot: Fix to check the histogram control param is a leaf node
  tracing/boot: Fix trace_boot_hist_add_array() to check array is value