Backport from Libtool: Fix relink mode to use absolute path if hardcode_minus_L.

/:
* ltmain.sh (relink): Use absolute path when hardcoding with -L.

Add a testcase for PR ld/12356.

2011-01-13  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/12356
* ld-scripts/defined.exp: Run defined5.

* ld-scripts/defined5.d: New.
* ld-scripts/defined5.s: Likewise.
* ld-scripts/defined5.t: Likewise.

[ia64-hpux] inferior function call support

We have two stacks to deal with on ia64, when making a function call.
The first is the usual stack frame, and the second is the register
stack frame.  On ia64-linux, the register frame is setup by adjusting
the BSP register.  Unfortunately for us, the HP-UX kernel does not allow
the debugger to change the value of the BSP.

To work around that limitation, the method I am using here is to push
some assembly code on the stack. This assembly code contains, among
other things, a call to the alloc insn, which sets up our frame for us.
An extensive comment in ia64-hpux-tdep.c explains the entire procedure.

Despite this approach, most of the code in ia64-tdep.c which sets up
the function call is still applicable - and only a few things need
to be done differently:  For instance, instead of changing the BSP,
we do nothing.  We store the parameters at a different location, etc.
So this patch also adjusts the inf-call code in ia64-tdep.c to make it
a little more extensible: I create a new ia64_infcall_ops structure
which allows an ABI to define how the few things that need to be
differentiated.

Another element that turned out to be necessary but is more of a detail
is that the computation of the linkage pointer needs to be handled
specially for symbols inside shared libraries.  This is especially
visible when calling malloc, which happens everytime memory needs to
be allocated in inferior memory...  The special treatment included
again the necessity to use some routines only available on the host.
So another target object TARGET_OBJECT_HPUX_SOLIB_GOT was created for
that purpose.

gdb/ChangeLog:

        * ia64-tdep.h (struct regcache): Forward declare.
        (struct ia64_infcall_ops): New struct type.
        (struct gdbarch_tdep): New fields "find_global_pointer_from_solib"
        and "infcall_ops".
        * ia64-tdep.c (ia64_find_global_pointer_from_dynamic_section):
        Renames ia64_find_global_pointer.
        (ia64_find_global_pointer, ia64_allocate_new_rse_frame)
        (ia64_store_argument_in_slot, ia64_set_function_addr: New function.
        (ia64_push_dummy_call): Adjust to use the new tdep ia64_infocall_ops
        methods.
        (ia64_infcall_ops): New static global constant.
        (ia64_gdbarch_init): Set tdep->infcall_ops.
        * ia64-hpux-nat.c (ia64_hpux_xfer_solib_got): New function.
        (ia64_hpux_xfer_partial): Add TARGET_OBJECT_HPUX_SOLIB_GOT handing.
        * ia64-hpux-tdep.c: Include "regcache.h", "gdbcore.h" and "inferior.h".
        (ia64_hpux_dummy_code): New static global constant.
        (ia64_hpux_push_dummy_code, ia64_hpux_allocate_new_rse_frame)
        (ia64_hpux_store_argument_in_slot, ia64_hpux_set_function_addr)
        (ia64_hpux_dummy_id, ia64_hpux_find_global_pointer_from_solib):
        New function.
        (ia64_hpux_infcall_ops): New static global constant.
        (ia64_hpux_init_abi): Install gdbarch and tdep methods needed
        for inferior function calls to work properly on ia64-hpux.

[ia64-hpux] unwinding bsp value from system call

This fixes unwinding from a thread that is stopped inside a system call.
This can be seen when switching to a thread that is stopped doing a
pthread_cond_wait, for instance...

The comments inside the code should explain what is happening in our
case (the HP-UX exception in the case of system calls): Under certain
circumstances (program stopped inside syscall), the offset to apply to
the current BSP in order to compute the previous BSP is not the usual
CFM & 0x7f.

We parts in this patch:

  1. Figuring out that we are stopped inside a syscal: This requires
     a TT_LWP_RUREGS ttrace call, which is not directly possible from
     ia64-tdep.c.  So use defined a new TARGET_OBJECT_HPUX_UREGS object
     to request it from the -nat side.

  2. Add a gdbarch_tdep method that allows us to change the default
     behavior on ia64-hpux, permitting us to have a different "size of
     register frame" in that one particular case.

gdb/ChangeLog:

        * target.h (enum target_object): Add TARGET_OBJECT_HPUX_UREGS.
        * ia64-tdep.h (struct frame_info): forward declaration.
        (struct gdbarch_tdep): Add field size_of_register_frame.
        * ia64-tdep.c (ia64_access_reg): Use tdep->size_of_register_frame
        to determine the size of the register frame.
        (ia64_size_of_register_frame): New function.
        (ia64_gdbarch_init): Set tdep->size_of_register_frame.
        * ia64-hpux-tdep.c: Include "target.h" and "frame.h".
        (IA64_HPUX_UREG_REASON): New macro.
        (ia64_hpux_stopped_in_syscall, ia64_hpux_size_of_register_frame):
        New functions.
        (ia64_hpux_init_abi): Set tdep->size_of_register_frame.
        * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): New function.
        (ia64_hpux_xfer_partial): Add handling of TARGET_OBJECT_HPUX_UREGS
        objects.

port GDB to ia64-hpux (native).

ChangeLog:

        * configure.ac: Remove readline, mmalloc, and gdb from noconfigdirs
        for ia64-hpux.
        * configure: Regenerate.

gdb/ChangeLog:

        * config/ia64/hpux.mh, ia64-hpux-nat.c, ia64-hpux-tdep.c,
        ia64-hpux-tdep.h, solib-ia64-hpux.c, solib-ia64-hpux.h: New files.

        * configure.host: Add handling for ia64-hpux hosts.  Add associated
        floatformats.
        * configure.tgt: Add handling for ia64-hpux targets.
        * Makefile.in (ALL_64_TARGET_OBS): Add ia64-hpux-tdep.o.
        (HFILES_NO_SRCDIR): Add ia64-hpux-tdep.h.
        (ALLDEPFILES): Add ia64-hpux-nat.c ia64-hpux-tdep.c.

[hpux/ttrace] Determine attached process LWP immediately after attaching.

When attaching to a process, the ttrace interface was creating a ptid
with a null LWP, because it did not have it yet.  This LWP was then
set as soon as we received our first event from our inferior, during
our first wait.  Similarly, the allocation of the thread private info
was also defered.

This works on PA/HP-UX, because we immediately perform a wait to pop
the event triggered by the attach.  We can use that event to extract
the thread's LWP.  But this does not work for IA64/HP-UX, because
the attach no longer triggers an event, and thus a wait should NOT
be performed (such a wait would simply block indefinitely).

It is actually possible, however, to determine the thread's LWP.
This change therefore adjusts the attach code to create a thread with
the correct LWP set, as well as with its private info allocated.
Same thing for all the other threads.

gdb/ChangeLog:

        [ttrace] Compute thread list immediately after attach.
        * inf_ttrace_attach (inf_ttrace_create_threads_after_attach):
        New subprogram.
        (inf_ttrace_attach): Use it.

[libunwind-frame] handle functions with no minimal symbol/debug info.

This is something that I am seeing on ia64-hpux while trying to
backtrace from a thread that's doing a wait:

    (gdb) task 2
    [Switching to task 2]
    0x9fffffffef52f590 in __ksleep () from /[...]/libc.so.1
    (gdb) bt
    #0  0x9fffffffef52f590 in __ksleep () from /[...]/libc.so.1
    #1  0x9fffffffef73c870 in __sleep_1x1 () from /[...]/libpthread.so.1
    #2  0x9fffffffef738fe0 in __mxn_sleep () from /[...]/libpthread.so.1
    #3  0x9fffffffef675e90 in ?? () from /[...]/libpthread.so.1

The backtrace is incomplete and stops at frame #3, but there are in fact
a few more frames.

The reason why we stopped the backtrace is related to the fact that
we were not able to determine the start address of the function
corresponding to the frame PC.  This is visible at the user level
thanks to the "??" that GDB displayed for frame 3.

We have the following code in libunwind-frame.c:libunwind_frame_cache
which explicitly returns a NULL cache when we couldn't determine the
frame's function address, immediately triggering an end-of-stack
frame_id, thus terminating the backtrace:

   /* We can assume we are unwinding a normal frame.  Even if this is
      for a signal trampoline, ia64 signal "trampolines" use a normal
      subroutine call to start the signal handler.  */
   cache->func_addr = get_frame_func (this_frame);
   if (cache->func_addr == 0
       && get_next_frame (this_frame)
       && get_frame_type (get_next_frame (this_frame)) == NORMAL_FRAME)
     return NULL;

As explained in the comment, I think we can still go on, and use
the unwind record to do the debugging.  This change imlements this
change, and allows us to get the full backtrace.

gdb/ChangeLog:

        * libunwind-frame.c (libunwind_frame_cache): Do not return NULL
        if we could not determine the frame's function address.  Instead,
        use the frame's PC, and then continue.

Make sure __LITTLE_ENDIAN/__BIG_ENDIAN are defined in libunwind-frame.c

These macros do not seem to exist on ia64-hpux.

gdb/ChangeLog:

        * libunwind-frame.c (__LITTLE_ENDIAN, __BIG_ENDIAN): Define if
        not already defined.

[ia64] small integral parameters and return values

This patch fixes a small problem on ia64-hpux when calling functions
whose parameter are small integral values (less than 8 bytes).  In
that case, the parameter value was stored on the wrong side of the
register.  Same problem for return values.

With this patch, the results for gdb.base/callfuncs.exp improve from

        # of expected passes            41
        # of unexpected failures        78

To:

        # of expected passes            95
        # of unexpected failures        24

gdb/ChangeLog:

        * ia64-tdep.c (ia64_struct_type_p): New function.
        (ia64_extract_return_value): Handle integral values that are
        less than 8 bytes long.
        (ia64_push_dummy_call): Likewise.

[ia64] Add a big-endian version of the ia64-ext floatformat

ia64-tdep.c defines a floatformats_ia64_ext that should contain
both the little-endian and the big-endian version of the float
format used in the ia64 registers (an 82bit float format).
Right now, both entries point to the same little-endian definition.

A big-endian definition is now necessary for the ia64-hpux port.

gdb/ChangeLog:

        * ia64-tdep.c (floatformat_ia64_ext_little): Renames
        floatformat_ia64_ext.
        (floatformat_ia64_ext_big): New static const.
        (floatformats_ia64_ext): Set first entry to &floatformat_ia64_ext_big.

Add xfail and notarget.

2011-01-13  H.J. Lu  <hongjiu.lu@intel.com>

* ld-scripts/defined4.d: Xfail rs6000-*-aix*.  Skip mips*-*-*
and mmix-*-*.

* ld-scripts/expr2.d: Xfail rs6000-*-aix* and arm-*-*aout.

Update copyright dates.

PR ld/12356
* ld.texinfo (Miscellaneous Commands): Describe LD_FEATURE.
(Expression Section): Update.
* ld.h (ld_config_type): Add sane_expr.
* ldgram.y (ifile_p1): Add LD_FEATURE.
* ldlex.l (LD_FEATYRE): New.
* ldemul.c (after_parse_default): Delete code handling ld_compatibility.
* ldexp.h (struct ldexp_control): Delete uses_defined.
* ldexp.c: Remove all uses of uses_defined.
(fold_name): Test config.sane_expr rather than ld_compatibility.
(exp_fold_tree_1): Likewise.  Adjust handling of assignments
during first phase.
* ldlang.h (ld_compatibility): Delete.
(lang_ld_feature): Declare.
* ldlang.c (ld_compatibility): Delete.
(open_input_bfds): Only handle assignments for --defsym.
(lang_ld_feature): New function.

PR ld/12356
* ldexp.h (exp_assop): Delete.
(exp_assign, exp_defsym): Declare.
* ldexp.c (exp_assop): Make static, handle all assignment variations.
(exp_assign, exp_defsym): New functions.
(exp_provide): Use exp_assop.
* ldgram.y (defsym_expr): Use exp_defsym.
* ldctor.c, * ldgram.y, * ldlang.c, * mri.c, * emultempl/beos.em,
* emultempl/pe.em, * emultempl/pep.em, * emultempl/spuelf.em,
* emultempl/xtensaelf.em: Update exp_assop -> exp_assign.

*** empty log message ***

daily update

sim: enable hw_tree_delete in sim_hw_uninstall

I can't find any history for why the call to hw_tree_delete is commented
out, and the VCS history shows that this goes back to the original import
in 2009.  I did find some vague reference to it from 2000 (pretty close
to the original import of code), but no actual details.

Without this call, every new instance of the sim results in all old
previously allocated resources being leaked.  With some devices, this
isn't just memory, it's things like open file descriptors or mmaps.

So if there are pending issues with this, I'd rather we get the sims
sorted out rather than continuing to leak this stuff.  Especially since
the "let's wait for the sims to fix themselves" hasn't actually happened
in the last 10+ years.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

sim: check asprintf return values

These are the last sources of build warnings (asprintf usage) that I see.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

gdb
* mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Fix error
messages.
* mi/mi-main.c (mi_cmd_thread_select): Fix error messages.
(mi_cmd_thread_list_ids): Likewise.
(mi_cmd_data_list_changed_registers): Likewise.
(mi_cmd_data_list_register_values): Likewise.
(mi_cmd_data_write_register_values): Likewise.
(mi_cmd_data_evaluate_expression): Likewise.
(mi_cmd_data_read_memory): Likewise.
(mi_cmd_data_read_memory_bytes): Likewise.
(mi_cmd_data_write_memory): Likewise.
(mi_cmd_enable_timings): Likewise.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Fix error messages.
* mi/mi-cmd-var.c (mi_cmd_var_create): Fix error messages.
(mi_cmd_var_delete): Likewise.
(mi_cmd_var_set_format): Likewise.
(mi_cmd_var_show_format): Likewise.
(mi_cmd_var_info_num_children): Likewise.
(mi_cmd_var_list_children): Likewise.
(mi_cmd_var_info_type): Likewise.
(mi_cmd_var_info_expression): Likewise.
(mi_cmd_var_show_attributes): Likewise.
(mi_cmd_var_assign): Likewise.
(mi_cmd_var_update): Likewise.
(mi_cmd_enable_pretty_printing): Likewise.
(mi_cmd_var_set_update_range): Likewise.
* mi/mi-cmd-target.c (mi_cmd_target_file_get): Fix error
messages.
(mi_cmd_target_file_put): Likewise.
(mi_cmd_target_file_delete): Likewise.
* mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Fix error
messages.
(mi_cmd_stack_info_depth): Likewise.
(mi_cmd_stack_list_locals): Likewise.
(mi_cmd_stack_list_args): Likewise.
(mi_cmd_stack_select_frame): Likewise.
(mi_cmd_stack_select_frame): Likewise.
(mi_cmd_stack_info_frame): Likewise.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Fix error
messages.
(mi_cmd_file_list_exec_source_files): Likewise.
* mi/mi-cmd-env.c (mi_cmd_env_pwd): Fix error messages.
(mi_cmd_env_cd): Likewise.
(mi_cmd_env_path): Likewise.
(mi_cmd_env_dir): Likewise.
(mi_cmd_inferior_tty_show): Likewise.
* mi/mi-cmd-disas.c (mi_cmd_disassemble): Fix error messages.
* mi/mi-cmd-break.c (mi_cmd_break_insert): Fix error messages.
(mi_cmd_break_watch): Likewise.
gdb/testsuite
* gdb.mi/gdb2549.exp: Update for error message changes.
* gdb.mi/mi-cli.exp: Likewise.
* gdb.mi/mi-disassemble.exp: Likewise.
* gdb.mi/mi-pthreads.exp: Likewise.
* gdb.mi/mi-regs.exp: Likewise.
* gdb.mi/mi-stack.exp: Likewise.
* gdb.mi/mi-var-block.exp: Likewise.
* gdb.mi/mi-var-cmd.exp: Likewise.
* gdb.mi/mi2-cli.exp: Likewise.
* gdb.mi/mi2-disassemble.exp: Likewise.
* gdb.mi/mi2-pthreads.exp: Likewise.
* gdb.mi/mi2-regs.exp: Likewise.
* gdb.mi/mi2-stack.exp: Likewise.
* gdb.mi/mi2-var-block.exp: Likewise.
* gdb.mi/mi2-var-cmd.exp: Likewise.

2011-01-12  Thiago Jung Bauermann  <bauerman@br.ibm.com>

* ppc-linux-nat.c (booke_cmp_hw_point): Fix whitespace.
(ppc_linux_insert_hw_breakpoint): Likewise.
(ppc_linux_remove_hw_breakpoint): Likewise.
(ppc_linux_insert_watchpoint): Likewise.

merge from gcc

gdb/
PR fortran/11104 and DWARF unbound arrays detection.
* dwarf2read.c (read_subrange_type): Set zero length on unspecified
upper bound.  Set TYPE_HIGH_BOUND_UNDEFINED if not language_ada on
unspecified upper bound.
* eval.c (evaluate_subexp_standard) <multi_f77_subscript>: Remove
variables array_size_array, tmp_type and offset_item.  New variable
array.  Remove call to f77_get_upperbound.  New variables array_type
and index.  Call value_subscripted_rvalue for each dimenasion.  Remove
the final call to deprecated_set_value_type.

gdb/testsuite/
PR fortran/11104 and DWARF unbound arrays detection.
* gdb.fortran/multi-dim.exp: New file.
* gdb.fortran/multi-dim.f90: New file.

gdb/
Make value allocations more lazy.
* ada-lang.c (coerce_unspec_val_to_type): Use allocate_value_lazy
instead of allocate_value and set_value_lazy when possible.
* dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use allocate_value_lazy
instead of allocate_value and set_value_lazy.
* findvar.c (value_of_register_lazy): Likewise.
(read_var_value): Remove V preallocation, call just check_typedef in
advance.  Move allocate_value to LOC_CONST, LOC_LABEL,
LOC_CONST_BYTES.  Use allocate_value_lazy in LOC_STATIC, LOC_ARG,
LOC_REF_ARG, LOC_LOCAL, LOC_BLOCK.  Set ADDR instead of
set_value_address and break in LOC_BLOCK.  Use allocate_value_lazy and
remove lval_memory set in LOC_REGPARM_ADDR.  Use allocate_value_lazy
in LOC_UNRESOLVED and LOC_OPTIMIZED_OUT.  Add setting lval_memory at
the end, remove set_value_lazy there.
* valarith.c (value_subscripted_rvalue): Use allocate_value_lazy
instead of allocate_value and set_value_lazy when possible.
* valops.c (value_fetch_lazy): Do nop for value_optimized_out VAL.
* value.c (allocate_computed_value): Use allocate_value_lazy instead
of allocate_value and set_value_lazy.
(value_from_contents_and_address): Use allocate_value_lazy instead of
allocate_value and set_value_lazy when possible.

sourceware.org/ml/gdb-patches/2010-12/msg00299.html
gdb/
        * disasm.c (dump_insns): Support dumping opcodes for MI.
        * mi/mi-cmd-disas.c (mi_cmd_disassemble): Allow mode to control
        dumping of instruction opcodes.

gdb/doc/
        * gdb.texinfo (GDB/MI Data Manipulation): Update to reflect
        changes in mi/mi-cmd-disas.c

gdb/testsuite/
        * gdb.mi/mi-disassemble.exp, gdb.mi/mi2-disassemble.exp: Update
        expected output to reflect changes in gdb/mi/mi-cmd-disas.c and
        add new tests for opcode dumping.

* gdb.texinfo (Threads): Remove duplicate text.  Update examples.
Fix "thread apply" text.

PR ld/12380
* ldexp.h (enum phase_enum): Comment.  Add exp_dataseg_done.
* ldexp.c (fold_unary <DATA_SEGMENT_END>): Rearrange code.  Test
for exp_dataseg_done rather than expld.phase == lang_final_phase_enum
to detect when we've finished sizing sections.
(fold_binary <DATA_SEGMENT_ALIGN>): Likewise.
(fold_binary <DATA_SEGMENT_RELRO_END>): Likewise.  Also test
that we are not inside an output section statement.
* ldlang.c (lang_size_sections): Set exp_dataseg_done on exit if
not exp_dataseg_relro_adjust or exp_dataseg_adjust.  Don't set
lang_final_phase_enum here.
(lang_process): Set lang_final_phase_enum here.

Detect GNU/kFreeBSD and set `gdb_osabi' appropiately

2011-01-09  Robert Millan  <rmh@gnu.org>

        * configure.tgt: Detect GNU/kFreeBSD and set `gdb_osabi'
        appropiately.

* rx-dis.c (print_insn_rx): Support RX_Operand_TwoReg.

Revert erroneous commit

* thread.c (do_captured_thread_select): Emit newline before
printing frame.

2011-01-11  Michael Snyder  <msnyder@vmware.com>

* ui-file.c: Comment cleanup, mostly periods and spaces.
* ui-file.h: Ditto.
* ui-out.c: Ditto.
* ui-out.h: Ditto.
* utils.c: Ditto.
* v850-tdep.c: Ditto.
* valarith.c: Ditto.
* valops.c: Ditto.
* valprint.c: Ditto.
* valprint.h: Ditto.
* value.c: Ditto.
* value.h: Ditto.
* varobj.c: Ditto.
* varobj.h: Ditto.
* vax-tdep.c: Ditto.
* vec.c: Ditto.
* vec.h: Ditto.
* version.h: Ditto.
* windows-nat.c: Ditto.
* windows-tdep.c: Ditto.
* xcoffread.c: Ditto.
* xcoffsolib.c: Ditto.
* xml-support.c: Ditto.
* xstormy16-tdep.c: Ditto.
* xtensa-tdep.c: Ditto.
* xtensa-tdep.h: Ditto.

*** empty log message ***

daily update

2011-01-11  Michael Snyder  <msnyder@vmware.com>

* s390-tdep.c: Comment cleanup, mostly periods and spaces.
* score-tdep.c: Ditto.
* score-tdep.h: Ditto.
* ser-base.c: Ditto.
* ser-go32.c: Ditto.
* serial.c: Ditto.
* serial.h: Ditto.
* ser-mingw.c: Ditto.
* ser-pipe.c: Ditto.
* ser-tcp.c: Ditto.
* ser-unix.c: Ditto.
* sh64-tdep.c: Ditto.
* shnbsd-nat.c: Ditto.
* sh-tdep.c: Ditto.
* sh-tdep.h: Ditto.
* solib.c: Ditto.
* solib-darwin.c: Ditto.
* solib-frv.c: Ditto.
* solib.h: Ditto.
* solib-irix.c: Ditto.
* solib-osf.c: Ditto.
* solib-pa64.c: Ditto.
* solib-som.c: Ditto.
* solib-spu.c: Ditto.
* solib-sunos.c: Ditto.
* solib-svr4.c: Ditto.
* solist.h: Ditto.
* sol-thread.c: Ditto.
* somread.c: Ditto.
* source.c: Ditto.
* source.h: Ditto.
* sparc64-linux-tdep.c: Ditto.
* sparc64-tdep.c: Ditto.
* sparc-linux-nat.c: Ditto.
* sparc-linux-tdep.c: Ditto.
* sparc-sol2-nat.c: Ditto.
* sparc-sol2-tdep.c: Ditto.
* sparc-tdep.c: Ditto.
* sparc-tdep.h: Ditto.
* spu-tdep.c: Ditto.
* stabsread.c: Ditto.
* stabsread.h: Ditto.
* stack.c: Ditto.
* symfile.c: Ditto.
* symfile.h: Ditto.
* symmisc.c: Ditto.
* symtab.c: Ditto.
* symtab.h: Ditto.
* target.c: Ditto.
* target-descriptions.c: Ditto.
* target-descriptions.h: Ditto.
* target.h: Ditto.
* target-memory.c: Ditto.
* terminal.h: Ditto.
* thread.c: Ditto.
* top.c: Ditto.
* tracepoint.c: Ditto.
* tracepoint.h: Ditto.
* trad-frame.h: Ditto.
* typeprint.c: Ditto.

* gdb.python/py-infthread.exp: Load gdb-python.exp.

2011-01-11  Thiago Jung Bauermann  <bauerman@br.ibm.com>

* breakpoint.c (resources_needed_watchpoint): Fix indentation.
* gdbtypes.c (is_scalar_type_recursive): Fix formatting.

2011-01-11  Sergio Durigan Junior  <sergiodj@linux.vnet.ibm.com>
    Thiago Jung Bauermann  <bauerman@br.ibm.com>

Implement support for PowerPC BookE ranged watchpoints.

gdb/
* breakpoint.h
(struct breakpoint_ops) <resources_needed>: New method.
Initialize to NULL in all existing breakpoint_ops instances.
(struct breakpoint) <exact>: New field.
(target_exact_watchpoints): Declare external global.
* breakpoint.c (target_exact_watchpoints): New global flag.
(update_watchpoint): Set b->type to bp_hardware_watchpoint and
b->enable_state to bp_enabled before calling
hw_watchpoint_used_count.
(hw_watchpoint_used_count): Iterate over all bp_locations in a
watchpoint.  Call breakpoint's breakpoint_ops.resources_needed
if available.
(insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte
if the watchpoint is exact.
(resources_needed_watchpoint): New function.
(watchpoint_breakpoint_ops): Add resources_needed_watchpoint.
(watch_command_1): Set b->exact if the user asked for an exact
watchpoint and one can be set.
(can_use_hardware_watchpoint): Add exact_watchpoints argument.
Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if
the user asks for an exact watchpoint and one can be set.  Return
number of needed debug registers to watch the expression.
* gdbtypes.c (is_scalar_type): New function, based on
valprint.c:scalar_type_p.
(is_scalar_type_recursive): New function.
* gdbtypes.h (is_scalar_type_recursive): Declare.
* ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always
handle regions when ranged watchpoints are available.
(create_watchpoint_request): New function.
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
create_watchpoint_request.
* rs6000-tdep.c (show_powerpc_exact_watchpoints): New function.
(_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the
`set powerpc' and `show powerpc' commands.
* target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>:
Mention documentation comment in the target macro.
(target_region_ok_for_hw_watchpoint): Document return value.

gdb/doc/
* gdb.texinfo (PowerPC Embedded): Document ranged watchpoints and
the "set powerpc exact-watchpoints" flag.

2011-01-11  Thiago Jung Bauermann  <bauerman@br.ibm.com>

* breakpoint.c (update_watchpoint): Decide on using a software or
hardware watchpoint after the bp_locations are created.

2010-01-11  Thiago Jung Bauermann  <bauerman@br.ibm.com>

Convert hardware watchpoints to use breakpoint_ops.

gdb/
* breakpoint.h (breakpoint_ops) <insert>: Rename to...
<insert_location>: ... this.  Return int instead of void.
Accept pointer to struct bp_location instead of pointer to
struct breakpoint.  Adapt all implementations.
(breakpoint_ops) <remove>: Rename to...
<remove_location>: ... this.  Accept pointer to struct bp_location
instead of pointer to struct breakpoint.  Adapt all implementations.
* breakpoint.c (insert_catchpoint): Delete function.
(insert_bp_location): Call the watchpoint or catchpoint's
breakpoint_ops.insert method.
(remove_breakpoint_1): Call the watchpoint or catchpoint's
breakpoint_ops.remove method.
(insert_watchpoint, remove_watchpoint): New functions.
(watchpoint_breakpoint_ops): New structure.
(watch_command_1): Initialize the OPS field.
* inf-child.c (inf_child_insert_fork_catchpoint)
(inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint)
(inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint)
(inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint):
Delete functions.
(inf_child_target): Remove initialization of to_insert_fork_catchpoint,
to_remove_fork_catchpoint, to_insert_vfork_catchpoint,
to_remove_vfork_catchpoint, to_insert_exec_catchpoint,
to_remove_exec_catchpoint and to_set_syscall_catchpoint.
* target.c (update_current_target): Change default implementation of
to_insert_fork_catchpoint, to_remove_fork_catchpoint,
to_insert_vfork_catchpoint, to_remove_vfork_catchpoint,
to_insert_exec_catchpoint, to_remove_exec_catchpoint and
to_set_syscall_catchpoint to return_one.
(debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint)
(debug_to_insert_exec_catchpoint): Report return value.
* target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint)
(to_insert_exec_catchpoint): Change declaration to return int instead
of void.

gdb/testsuite/
* gdb.base/foll-exec.exp: Adapt to new error string when the catchpoint
type is not supported.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.

sim: allow memory maps to default to mapped files

I find it annoying when using --memory-mapfile that I also need to look
up and manually specify the file size to the following --memory-region
option.  So make a length of 0 in the following --memory-region trigger
an auto-sizing of the map to the length of the file being mapped.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

2011-01-11  Michael Snyder  <msnyder@vmware.com>

* arm-tdep.c: Internationalization.
* c-lang.c: Ditto.
* charset.c: Ditto.
* fork-child.c: Ditto.
* nto-procfs.c: Ditto.
* ppc-sysv-tdep.c: Ditto.
* procfs.c: Ditto.
* remote-mips.c: Ditto.
* remote.c: Ditto.
* rs6000-nat.c: Ditto.
* rs6000-tdep.c: Ditto.
* target.c: Ditto.
* valops.c: Ditto.
* value.c: Ditto.
* xml-support.c: Ditto.
* mi/mi-cmd-break.c: Ditto.
* mi/mi-cmd-var.c: Ditto.
* mi/mi-interp.c: Ditto.
* mi/mi-main.c: Ditto.

sourceware.org/ml/gdb-patches/2010-11/msg00112.html
gdb/ChangeLog
* remote-sim.c (gdbsim_store_register): Update API to
sim_store_register to check more error conditions.
include/gdb/ChangeLog
* remote-sim.h (sim_store_register): Update the API
documentation for this function.
sim/erc32/ChangeLog
sim/h8300/ChangeLog
sim/m32c/ChangeLog
sim/mn10300/ChangeLog
sim/ppc/ChangeLog
sim/rx/ChangeLog
sim/v850/ChangeLog
* ???.c (sim_store_register): Update return value to
match new API.

* readelf.c (print_symbol): Handle symbol characters as unsigned.
Whitespace fixes.

elf32-arm.c (elf32_arm_tls_relax): Note fixme pointed out by AlanM

Take unadjusted offset for loongson3a specific instructions.

Fix change log omission.

*** empty log message ***

* layout.cc (Layout::layout_eh_frame): Mark a writable .eh_frame
section as relro.
(Layout::set_segment_offsets): Reset increase_relro before calling
set_section_addresses a second time.

sim: fix handling of 2nd arg to SIM_AC_OPTION_HARDWARE

The 2nd arg to SIM_AC_OPTION_HARDWARE is described as "a space separated
list of devices that override the defaults" while the 3rd arg is "a space
separated list of extra target specific devices".  But the macro doesn't
seem to treat the 2nd arg this way.

Instead, it will always add the default list of devices, and only add the
extra target specific devices if the 2nd arg is not specified.  So rework
the logic slightly to handle the 2nd arg as documented.

This shouldn't affect any targets in the tree as no one passes in a non-
empty value as the 2nd arg.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

sim: add noreturn markings to more hw abort/halt funcs

These functions either call abort() themselves, or call functions which
are already marked noreturn.  Either way, they don't return, so mark them
as such so calling code can assume this.  This fixes some uninitialized
warnings due to code paths that end in an abort function.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

2011-01-10  Michael Snyder  <msnyder@vmware.com>

* nto-procfs.c: Comment cleanup, mostly periods and spaces.
* nto-tdep.c: Ditto.
* nto-tdep.h: Ditto.
* objc-exp.y: Ditto.
* objc-lang.c: Ditto.
* objfiles.c: Ditto.
* objfiles.h: Ditto.
* observer.c: Ditto.
* opencl-lang.c: Ditto.
* osabi.c: Ditto.
* parse.c: Ditto.
* parser-defs.h: Ditto.
* p-exp.y: Ditto.
* p-lang.c: Ditto.
* posix-hdep.c: Ditto.
* ppcbug-rom.c: Ditto.
* ppc-linux-nat.c: Ditto.
* ppc-linux-tdep.c: Ditto.
* ppc-linux-tdep.h: Ditto.
* ppcnbsd-tdep.c: Ditto.
* ppcobsd-tdep.c: Ditto.
* ppcobsd-tdep.h: Ditto.
* ppc-sysv-tdep.c: Ditto.
* ppc-tdep.h: Ditto.
* printcmd.c: Ditto.
* proc-abi.c: Ditto.
* proc-flags.c: Ditto.
* procfs.c: Ditto.
* proc-utils.h: Ditto.
* progspace.h: Ditto.
* prologue-value.c: Ditto.
* prologue-value.h: Ditto.
* psympriv.h: Ditto.
* psymtab.c: Ditto.
* p-typeprint.c: Ditto.
* p-valprint.c: Ditto.
* ravenscar-sparc-thread.c: Ditto.
* ravenscar-thread.c: Ditto.
* ravenscar-thread.h: Ditto.
* record.c: Ditto.
* regcache.c: Ditto.
* regcache.h: Ditto.
* remote.c: Ditto.
* remote-fileio.c: Ditto.
* remote-fileio.h: Ditto.
* remote.h: Ditto.
* remote-m32r-sdi.c: Ditto.
* remote-mips.c: Ditto.
* remote-sim.c: Ditto.
* rs6000-aix-tdep.c: Ditto.
* rs6000-nat.c: Ditto.
* rs6000-tdep.c: Ditto.

2011-01-10  Michael Snyder  <msnyder@vmware.com>

* charset.c (validate): Internationalization.
* coffread.c (read_one_sym): Ditto.
* dwarf2read.c (dwarf2_attach_fields_to_type): Ditto.
* h8300-tdep.c (H8300_extract_return_value): Ditto.
* inflow.c (new_tty): Ditto.
* iq2000-tdep.c (iq2000_breakpoint_from_pc): Ditto.
* m32c-tdep.c (m32c_return_value): Ditto.
* mep-tdep.c (mep_store_return_value): Ditto.
* score-tdep.c (score7_fetch_insn): Ditto.
* ser-mingw.c (pipe_windows_open): Ditto.
* sh64-tdep.c (sh64_extract_return_value): Ditto.
* spu-tdep.c (spu_register_type): Ditto.
* tracepoint.c (trace_find_command): Ditto.
* valarith.c (value_pos): Ditto.

Remove the extra `.'.

Add a test for linker ASSERT.

2011-01-10  H.J. Lu  <hongjiu.lu@intel.com>

* ld-scripts/assert.exp: Run assert2.

* ld-scripts/assert2.d: New.
* ld-scripts/assert2.t: Likewise.

* po/da.po: Updated Danish translation.

Remove startup_file from ldlang.c.

2011-01-10  H.J. Lu  <hongjiu.lu@intel.com>

* ldlang.c (startup_file): Removed.
(lang_startup): Updated.

2011-01-10  Phil Muldoon  <pmuldoon@redhat.com>

* gdb.python/py-cmd.exp: Remove gdb_py_test_multiple function.
Use load_lib gdb-python.exp.
* gdb.python/python.exp: Ditto.
* gdb.python/py-function.exp: Ditto.

* config/tc-i386.c (x86_elf_abi): Only define for targets that use
it.

* config/tc-arm.c (s_arm_tls_desceq): Move code into ELF-only
part of the file.

bfd/
* reloc.c (BFD_RELOC_ARM_TLS_GOTDESC, BFD_RELOC_ARM_TLS_CALL,
BFD_RELOC_ARM_THM_TLS_CALL, BFD_RELOC_ARM_TLS_DESCSEQ,
BFD_RELOC_ARM_THM_TLS_DESCSEQ, BFD_RELOC_ARM_TLS_DESC): New
relocations.
* libbfd.h: Rebuilt.
* bfd-in2.h: Rebuilt.
* elf32-arm.c (elf32_arm_howto_table_1): Add new relocations.
(elf32_arm_reloc_map): Likewise.
(tls_trampoline, dl_tlsdesc_lazy_trampoline): New PLT templates.
(elf32_arm_stub_long_branch_any_tls_pic,
elf32_arm_stub_long_branch_v4t_thumb_tls_pic): New stub templates.
(DEF_STUBS): Add new stubs.
(struct_elf_arm_obj_data): Add local_tlsdesc_gotent field.
(elf32_arm_local_tlsdesc_gotent): New.
(GOT_TLS_GDESC): New mask.
(GOT_TLS_GD_ANY): Define.
(struct elf32_arm_link_hash_entry): Add tlsdesc_got field.
(elf32_arm_compute_jump_table_size): New.
(struct elf32_arm_link_hash_table): Add next_tls_desc_index,
num_tls_desc, dt_tlsdesc_plt, dt_tlsdesc_got, tls_trampoline,
sgotplt_jump_table_size fields.
(elf32_arm_link_hash_newfunc): Initialize tlsdesc_got field.
(elf32_arm_link_hash_table_create): Initialize new fields.
(arm_type_of_stub): Check TLS desc relocs too.
(elf32_arm_stub_name): TLS desc relocs can be shared.
(elf32_arm_tls_transition): Determine relaxation.
(arm_stub_required_alignment): Add tls stubs.
(elf32_arm_size_stubs): Likewise.
(elf32_arm_tls_relax): Perform TLS relaxing.
(elf32_arm_final_link_relocate): Process TLS DESC relocations.
(IS_ARM_TLS_GNU_RELOC): New.
(IS_ARM_TLS_RELOC): Use it.
(elf32_arm_relocate_section): Perform TLS relaxing.
(elf32_arm_check_relocs): Anticipate TLS relaxing, process tls
desc relocations.
(allocate_dynrelocs): Allocate tls desc relcoations.
(elf32_arm_output_arch_local_syms): Emit tls trampoline mapping
symbols.
(elf32_arm_size_dynamic_sections): Allocate tls trampolines and
got slots.
(elf32_arm_always_size_sections): New. Create _TLS_MODULE_BASE
symbol.
(elf32_arm_finish_dynamic_symbol): Adjust.
(arm_put_trampoline): New.
(elf32_arm_finish_dynamic_sections): Emit new dynamic tags and tls
trampolines.
(elf_backend_always_size_sections): Define.

include/elf/
* arm.h (R_ARM_TLS_DESC, R_ARM_TLS_GOTDESC, R_ARM_TLS_CALL,
R_ARM_TLS_DESCSEQ, T_ARM_THM_TLS_CALL, R_ARM_THM_TLS_DESCSEQ): New
relocations.

gas/
* doc/c-arm.texi: Document TLSDESC and TLSCALL relocations, and
.tlsdescseq directive.
* config/tc-arm.c (arm_typed_reg_parse): Check for potential reloc
following a symbol.
(s_arm_tls_descseq): New directive.
(md_pseudo_table): Add it.
(encode_branch): Allow TLS_CALL relocs too.
(do_t_blx, do_t_branch23): Use encode_branch.
(reloc_names): Add tlsdesc and tlscall.
(md_apply_fix): Process tls desc relocations.
(tc_gen_reloc): Likewise.
(arm_fix_adjustable): Likewise.

gas/testsuite/
* gas/arm/tls.s: Add tlsdesc tests.
* gas/arm/tls.d: Adjust.

ld/testsuite/
* ld-arm/arm-elf.exp: Added tests for new TLS handling
relocations.
* ld-arm/tls-descrelax-be32.d: New.
* ld-arm/tls-descrelax-be32.s: New.
* ld-arm/tls-descrelax-be8.d: New.
* ld-arm/tls-descrelax-be8.s: New.
* ld-arm/tls-descrelax-v7.d: New.
* ld-arm/tls-descrelax-v7.s: New.
* ld-arm/tls-descrelax.d: New.
* ld-arm/tls-descrelax.s: New.
* ld-arm/tls-descseq.d: New.
* ld-arm/tls-descseq.r: New.
* ld-arm/tls-descseq.s: New.
* ld-arm/tls-gdesc-got.d: New.
* ld-arm/tls-gdesc-got.s: New.
* ld-arm/tls-gdesc-nlazy.g: New.
* ld-arm/tls-gdesc-nlazy.s: New.
* ld-arm/tls-gdesc.d: New.
* ld-arm/tls-gdesc.r: New.
* ld-arm/tls-gdesc.s: New.
* ld-arm/tls-gdierelax.d: New.
* ld-arm/tls-gdierelax.s: New.
* ld-arm/tls-gdierelax2.d: New.
* ld-arm/tls-gdierelax2.s: New.
* ld-arm/tls-gdlerelax.d: New.
* ld-arm/tls-gdlerelax.s: New.
* ld-arm/tls-lib-loc.d: New.
* ld-arm/tls-lib-loc.r: New.
* ld-arm/tls-lib-loc.s: New.
* ld-arm/tls-longplt-lib.d: New.
* ld-arm/tls-longplt-lib.s: New.
* ld-arm/tls-longplt.d: New.
* ld-arm/tls-longplt.s: New.
* ld-arm/tls-mixed.r: New.
* ld-arm/tls-mixed.s: New.
* ld-arm/tls-thumb1.d: New.
* ld-arm/tls-thumb1.s: New.
* ld-arm/arm-elf.exp: New.

minor comment reformatting (ada-valprint.c:printstr)

Just to make the length of each line a little more balanced.

gdb/ChangeLog:

        * ada-valprint.c (printstr): Minor comment reformatting.

2011-01-08  Michael Snyder  <msnyder@vmware.com>

* m32r-rom.c (m32r_upload_command): Fix up ARI warnings for _
markup.

*** empty log message ***

daily update

* gdb.threads/tls.exp ("info address me"): Fix expected output.

2011-01-08  Michael Snyder  <msnyder@vmware.com>

* m2-exp.y: Comment cleanup, mostly periods and spaces.
* m2-lang.c: Ditto.
* m2-typeprint.c: Ditto.
* m2-valprint.c: Ditto.
* m32c-tdep.c: Ditto.
* m32r-linux-nat.c: Ditto.
* m32r-rom.c: Ditto.
* m32r-tdep.c: Ditto.
* m32r-tdep.h: Ditto.
* m68hc11-tdep.c: Ditto.
* m58klinux-nat.c: Ditto.
* m68k-tdep.c: Ditto.
* m88k-tdep.c: Ditto.
* m88k-tdep.h: Ditto.
* machoread.c: Ditto.
* macrocmd.c: Ditto.
* macroexp.c: Ditto.
* macrotab.c: Ditto.
* main.c: Ditto.
* maint.c: Ditto.
* mdebugread.c: Ditto.
* mdebugread.h: Ditto.
* memattr.c: Ditto.
* memattr.h: Ditto.
* memory-map.h: Ditto.
* mep-tdep.c: Ditto.
* microblaze-rom.c: Ditto.
* microblaze-tdep.c: Ditto.
* minsyms.c: Ditto.
* mips-irix-tdep.c: Ditto.
* mips-linux-nat.c: Ditto.
* mips-linux-tdep.c: Ditto.
* mips-linux-tdep.h: Ditto.
* mipsnbsd-nat.c: Ditto.
* mipsnbsd-tdep.c: Ditto.
* mipsread.c: Ditto.
* mips-tdep.c: Ditto.
* mips-tdep.h: Ditto.
* mn10300-linux-tdep.c: Ditto.
* mn10300-tdep.c: Ditto.
* mn10300-tdep.h: Ditto.
* monitor.c: Ditto.
* monitor.h: Ditto.
* moxie-tdep.c: Ditto.
* moxie-tdep.h: Ditto.
* mt-tdep.c: Ditto.

2011-01-08  Michael Snyder  <msnyder@vmware.com>

* h8300-tdep.c: Comment cleanup, mostly periods and spaces.
* hppa-hpux-tdep.c: Ditto.
* hppa-linux-nat.c: Ditto.
* hppa-linux-tdep.c: Ditto.
* hppanbsd-tdep.c: Ditto.
* hppa-tdep.c: Ditto.
* hppa-tdep.h: Ditto.
* hpux-thread.c: Ditto.
* i386-cygwin-tdep.c: Ditto.
* i386-darwin-nat.c: Ditto.
* i386gnu-nat.c: Ditto.
* i386-linux-nat.c: Ditto.
* i386-linux-tdep.c: Ditto.
* i386-nat.c: Ditto.
* i386-nat.h: Ditto.
* i386nbsd-tdep.c: Ditto.
* i386-sol2-nat.c: Ditto.
* i386-stub.c: Ditto.
* i386-tdep.c: Ditto.
* i386-tdep.h: Ditto.
* i387-tdep.c: Ditto.
* ia64-linux-nat.c: Ditto.
* ia64-linux-tdep.c: Ditto.
* ia64-tdep.c: Ditto.
* infcall.c: Ditto.
* infcall.h: Ditto.
* infcmd.c: Ditto.
* inferior.c: Ditto.
* inferior.h: Ditto.
* infloop.c: Ditto.
* inflow.c: Ditto.
* infrun.c: Ditto.
* interps.c: Ditto.
* interps.h: Ditto.
* iq2000-tdep.c: Ditto.
* irix5-nat.c: Ditto.
* jit.c: Ditto.
* jit.h: Ditto.
* jv-exp.y: Ditto.
* jv-lang.c: Ditto.
* jv-lang.h: Ditto.
* jv-typeprint.c: Ditto.
* jv-valprint.c: Ditto.
* language.c: Ditto.
* language.h: Ditto.
* linespec.c: Ditto.
* linux-fork.c: Ditto.
* linux-nat.c: Ditto.
* linux-thread-db.c: Ditto.
* lm32-tdep.c: Ditto.

*** empty log message ***

daily update

gdb: bfin: tix typo in register name

Looks like we've long been using "AO" instead of "A0" in the enum for the
A0.W.  But no one noticed since we aren't using it directly (we assume the
position in the reverse).  I've committed this simple fix.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Fix typo in fbsd-nat.c.

        * fbsd-nat.c (fbsd_find_memory_regions): Fix typo.

* ld-misc/defsym1.d: Add a -e linker command line option.
* ld-misc/dummy.s: Remove text.

correct PR citation in previous delta

PR ld/13258
PR ld/13259
* ld-elf/textaddr2.d: Fix regexp to work with hppa64 targets.
* ld-elf/textaddr6.d: Fix regexp to work with hppa64 targets.

2011-01-07  Michael Snyder  <msnyder@vmware.com>

* charset.c (_initialize_charset): Fix typo in string.

*** empty log message ***

Update gas/i386/ilp32/x86-64-arch-2.d.

2011-01-07  H.J. Lu  <hongjiu.lu@intel.com>

* gas/i386/ilp32/x86-64-arch-2.d: Add bmi flag and BMI instruction
pattern.

daily update

2011-01-07  Michael Snyder  <msnyder@vmware.com>

* mi/mi-cmd-disas.c (mi_cmd_disassemble): Mark up error message
for i18n.
* tui/tui-layout.c (tui_set_layout_for_display_command):
Split line so that operator goes to beginning of line.
* tui/tui-winsource.c (tui_horizontal_source_scroll): Move
assignment out of if statement.

2011-01-07  Michael Snyder  <msnyder@vmware.com>

* ada-lang.c: Comment cleanup, mostly periods and spaces.
* ada-lang.h: Ditto.
* ada-tasks.c: Ditto.
* ada-valprint.c: Ditto.
* aix-threads.c: Ditto.
* alpha-linux-nat.c: Ditto.
* alpha-linux-tdep.c: Ditto.
* alpha-mdebug-tdep.c: Ditto.
* alpha-nat.c: Ditto.
* alpha-osf1-tdep.c: Ditto.
* alpha-tdep.c: Ditto.
* alphabsd-nat.c: Ditto.
* alphabsd-tdep.c: Ditto.
* amd64-darwin-tdep.c: Ditto.
* amd64-linux-nat.c: Ditto.
* amd64-linux-tdep.c: Ditto.
* amd64-sol2-tdep.c: Ditto.
* amd64-tdep.c: Ditto.
* amd64-fbsd-tdep.c: Ditto.
* amd64-nbsd-tdep.c: Ditto.
* amd64-obsd-tdep.c: Ditto.
* amd64-linux-nat.c: Ditto.
* amd64-linux-tdep.c: Ditto.
* arm-tdep.c: Ditto.
* arm-tdep.h: Ditto.
* armnbsd-nat.c: Ditto.
* avr-tdep.c: Ditto.
* bfin-tdep.c: Ditto.
* bsd-kvm.c: Ditto.
* c-typeprintc: Ditto.
* c-valprint.c: Ditto.
* coff-pe-read.h: Ditto.
* coffreead.c: Ditto.
* cris-tdep.c: Ditto.
* d-lang.c: Ditto.
* darwin-nat-info.c: Ditto.
* darwin-nat.c: Ditto.
* dbug-rom.c: Ditto.
* dbxread.c: Ditto.
* dcache.c: Ditto.
* dcache.h: Ditto.
* dec-thread.c: Ditto.
* defs.h: Ditto.
* demangle.c: Ditto.
* dicos-tdep.c: Ditto.
* dictionary.c: Ditto.
* dictionary.h: Ditto.
* dink32-rom.c: Ditto.
* disasm.c: Ditto.
* doublest.c: Ditto.
* dsrec.c: Ditto.
* dummy-frame.c: Ditto.
* dwarf2-frame.c: Ditto.
* dwarf2expr.c: Ditto.
* dwarf2loc.c: Ditto.
* dwarf2read.c: Ditto.
* elfread.c: Ditto.
* environ.c: Ditto.
* eval.c: Ditto.
* event-top.h: Ditto.
* exceptions.c: Ditto.
* exceptions.h: Ditto.
* exec.c: Ditto.
* expprint.c: Ditto.
* expression.h: Ditto.
* f-exp.y: Ditto.
* f-lang.c: Ditto.
* f-lang.h: Ditto.
* f-typeprint.c: Ditto.
* f-valprint.c: Ditto.
* fbsd-nat.c: Ditto.
* findvar.c: Ditto.
* fork-child.c: Ditto.
* frame.c: Ditto.
* frame.h: Ditto.
* frv-linux-tdep.c: Ditto.
* frv-tdep.c: Ditto.
* gcore.c: Ditto.
* gdb-stabs.h: Ditto.
* gdb_assert.h: Ditto.
* gdb_string.h: Ditto.
* gdb_thread_db.h: Ditto.
* gdb_wait.h: Ditto.
* gdbarch.sh: Ditto.
* gdbcore.h: Ditto.
* gdbthread.h: Ditto.
* gdbtypes.c: Ditto.
* gdbtypes.h: Ditto.
* gnu-nat.c: Ditto.
* gnu-nat.h: Ditto.
* gnu-v2-abi.c: Ditto.
* gnu-v3-abi.c: Ditto.
* go32-nat.c: Ditto.
* gdbarch.c: Regenerate.
* gdbarch.h: Regenerate.

Add docs and arch tests to BMI.

gas/
2011-01-07  Quentin Neill  <quentin.neill@amd.com>

* config/tc-i386.c (cpu_arch): Add CPU_BMI_FLAGS.

* doc/c-i386.texi (i386-BMI): New section.

gas/testsuite/
2011-01-07  Quentin Neill  <quentin.neill@amd.com>

* gas/i386/arch-10.s: Add a BMI instruction.
* gas/i386/x86-64-arch-2.s: Likewise.
* gas/i386/arch-10.d: Add bmi flag and BMI instruction pattern.
* gas/i386/x86-64-arch-2.d: Likewise.
* gas/i386/arch-10-1.l: Add BMI instruction pattern.
* gas/i386/arch-10-2.l: Likewise.
* gas/i386/arch-10-3.l: Likewise.
* gas/i386/arch-10-4.l: Likewise.

2011-01-07  Michael Snyder  <msnyder@vmware.com>

* ax-gdb.c: Adjust some long output strings.
* breakpoint.c: Ditto.
* charset.c: Ditto.
* cp-abi.c: Ditto.
* infcall.c: Ditto.
* infrun.c: Ditto.
* linux-nat.c: Ditto.
* solib-pa64.c: Ditto.
* solib-som.c: Ditto.

* gdb.texinfo (Python API): Add descriptions to @menu items.

Optimize _bfd_elf_allocate_ifunc_dyn_relocs.

2011-01-06  H.J. Lu  <hongjiu.lu@intel.com>

* elf-ifunc.c (_bfd_elf_allocate_ifunc_dyn_relocs): Optimized.

gdb/testsuite/
* configure: Regenerate.

* gas/pdp11/pdp11.exp: Add run of absreloc.

*** empty log message ***

daily update

gdb
PR python/12367:
* NEWS: Add item.
* python/python.c (GdbMethods): Add "newest_frame" method.
* python/python-internal.h (gdbpy_newest_frame): Declare.
* python/py-frame.c (gdbpy_newest_frame): New function.
gdb/doc
* gdb.texinfo (Frames In Python): Document gdb.newest_thread.
gdb/testsuite
* gdb.python/py-frame.exp: Test gdb.newest_frame.

ChangeLog:
2010-01-06  Paul Pluzhnikov  <ppluzhnikov@google.com>

* jit.h (struct jit_code_entry): use ULONGEST for symfile_size.
* jit.c (jit_debug): New variable.
(show_jit_debug): New function.
(struct target_buffer): Use ULONGEST.
(bfd_open_from_target_memory): Likewise.
(jit_register_code, jit_inferior_init): Add debug output.
(_initialize_jit): Register "debug jit" command.

doc/ChangeLog:
2010-01-06  Paul Pluzhnikov  <ppluzhnikov@google.com>

       * gdb.texinfo (Debugging Output): Document "set debug jit".

Correct year.

Handle STT_GNU_IFUNC symols when building shared library.

bfd/

2012-01-06  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/12366
PR ld/12371
* elf-ifunc.c (_bfd_elf_allocate_ifunc_dyn_relocs): Properly
handle symbols marked with regular reference, but not non-GOT
reference when building shared library.

* elf32-i386.c (elf_i386_gc_sweep_hook): Properly handle
local and global STT_GNU_IFUNC symols when building shared
library.
* elf64-x86-64.c (elf_x86_64_gc_sweep_hook): Likewise.

ld/testsuite/

2012-01-06  H.J. Lu  <hongjiu.lu@intel.com>

PR ld/12366
PR ld/12371
* ld-ifunc/ifunc-10-i386.s: Add more tests.
* ld-ifunc/ifunc-10-x86-64.s: Likewise.
* ld-ifunc/ifunc-11-i386.s: Likewise.
* ld-ifunc/ifunc-11-x86-64.s: Likewise.

* ld-ifunc/ifunc-12-i386.d: New.
* ld-ifunc/ifunc-12-i386.s: Likewise.
* ld-ifunc/ifunc-12-x86-64.d: Likewise.
* ld-ifunc/ifunc-12-x86-64.s: Likewise.
* ld-ifunc/ifunc-13-i386.d: Likewise.
* ld-ifunc/ifunc-13-x86-64.d: Likewise.
* ld-ifunc/ifunc-13a-i386.s: Likewise.
* ld-ifunc/ifunc-13a-x86-64.s: Likewise.
* ld-ifunc/ifunc-13b-i386.s: Likewise.
* ld-ifunc/ifunc-13b-x86-64.s: Likewise.

gdb
* frame.h (enum frame_type) <INLINE_FRAME>: Fix comment.
* python/py-frame.c (gdbpy_initialize_frames): Add INLINE_FRAME
and ARCH_FRAME.
gdb/doc
PR python/12133:
* gdb.texinfo (Frames In Python): Document various frame
constants.

* python/py-frame.c (frapy_block): Use get_frame_block.

* config/tc-pdp11.c (parse_op_no_deferred): Allow PC-relative
references to absolute addresses.

* gas/pdp11/opcode.d: Fix expected output for sec instruction.

Do not stop on SIGPRIO signals by default

This signal does not indicate an error condition, so the default
behavior when receiving this signal should be to resume execution
silently.

gdb/ChangeLog:

        Do not stop on SIGPRIO signals by default
        * infrun.c (_initialize_infrun): Unset signal_stop and
        signal_print for TARGET_SIGNAL_PRIO.

fix style violation in ada-tasks.c comment

gdb/ChangeLog:

       * ada-tasks.c: Fix style violation in comment.

gas/testsuite/
* gas/arm/blx-bad.s: New.
* gas/arm/blx-bad.d: New.

opcodes/
* arm-dis.c (thumb32_opcodes): BLX must have bit zero clear.

* bucomm.c (get_file_size): Check for negative sizes and issue a
warning message if encountered.