[media] gspca - sn9c20x: Fix status LED device 0c45:62b3

Tested with webcam "SilverCrest WC2130".

Signed-off-by: Frank Schaefer <fschaefer.oss@googlemail.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - zc3xx: New webcam 03f0:1b07 HP Premium Starter Cam

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - spca1528: Don't force the USB transfer alternate setting

As the choice of the alternate setting has been enhanced in the gspca main,
forcing its number here is no more useful.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - spca1528: Change the JPEG quality of the images

The JPEG quality was guessed as around 82%. Information in ms-win drivers
says it should be 85%.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - spca1528: Add some comments and update copyright

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - spca1528: Increase the status waiting time

Some webcams ask for a greater time to start.
This patch increases the delay before timeout error on capture start.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - topro: New subdriver for Topro webcams

This driver is based on Anders Blomdell's source proposed in april 2009.
It has been extended to handle the tp6810 bridge and the soi763a sensor.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - main: Handle the xHCI error on usb_set_interface()

This patch is adapted from a patch from Sarah Sharp (2010/05/03).
The xHCD handler checks the USB bandwidth on usb_set_interface()
instead of on usb_submit_urb().
Now, the same treatment is applied in case of error of both functions.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - main: Use a better altsetting for image transfer

Previously image transfer used to use the highest altsetting, which, most of
the time, took the whole USB bandwidth.
Now, the altsetting is chosen according to an estimation of the bandwidth
needed for image transfer.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] gspca - benq: Remove the useless function sd_isoc_init

The sd_isoc_init() did only a set interface which is done in gspca main.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] it913x-fe: correct tuner settings

Correct tuner settings for more accuracy. This now makes the tuner
 section more compatible with other versions of the IT913X
 series.

TODOs
Version 2 chip

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] it913x: add remote control support

Add remote support for KWORLD UB499-2T-T09

The remote supplied is the same as KWORLD_315U.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] stk-webcam.c: webcam LED bug fix

This is an improved version of the patch I sent a little ago.

The problem was:
On my DC-1125 webcam chip from Syntek, whenever the webcam turns
on, the LED light on it is turned on also and never turns off again unless
system is shut downed or restarted.

The previous version seemed to break some other laptop webcam work. Thanks
to Andrea Anacleto for the bug report and solution.

Signed-off-by: Andrea Anacleto <andreaanacleto@libero.it>
Signed-off-by: Arvydas Sidorenko <asido4@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l subdev: add dispatching for VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER

Ioctls on the subdevs node currently don't dispatch the register access debug
driver callbacks. Add the dispatching with the same security checks are for
non subdev video nodes (i.e. only capable(CAP_SYS_ADMIN may call the register
access ioctls).

Signed-off-by: Martin Hostettler <martin@neutronstar.dyndns.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci vpbe: remove unused macro

remove VPBE_DISPLAY_SD_BUF_SIZE as it is no longer used.

Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ttusb2: TT CT-3650 CI support

Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

USB: export video.h to the includes available for userspace

The uvcvideo extension unit API requires constants defined in the
video.h header. Add it to the list of includes exported to userspace.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Add a mapping for H.264 payloads

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media: Fix a UVC performance problem on systems with non-coherent DMA

The UVC driver uses usb_alloc_coherent() to allocate DMA data buffers.
On systems without coherent DMA this ends up allocating buffers in
uncached memory. The subsequent memcpy's done to coalesce the DMA
chunks into contiguous buffers then run VERY slowly. On a MIPS test
system the memcpy is about 200 times slower. This issue prevents the
system from keeping up with 720p YUYV data at 10fps.

The following patch uses kmalloc to alloc the DMA buffers instead of
usb_alloc_coherent on systems without coherent DMA. With this patch
the system was easily able to keep up with 720p at 10fps.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Remove deprecated UVCIOC ioctls

The UVCIOC_CTRL_ADD, UVCIOC_CTRL_MAP_OLD, UVCIOC_CTRL_GET and
UVCIOC_CTRL_SET ioctls are deprecated and were scheduled for removal for
v2.6.42. As v2.6.42 == v3.2, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] uvcvideo: Detect The Imaging Source CCD cameras by vendor and product ID

The Imaging Source CCD cameras use a vendor specific interface class
even though they are actually UVC compliant.

Signed-off-by: Arne Caspari <arne@unicap-imaging.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] rc tables: include linux/module.h

Prevents errors when merging with -next:

drivers/media/rc/keymaps/rc-snapstream-firefly.c:105:16: error: expected declaration specifiers or ‘...’ before string constant
drivers/media/rc/keymaps/rc-snapstream-firefly.c:106:15: error: expected declaration specifiers or ‘...’ before string constant

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] staging: dt3155v4l: fix build break

This patch fixes build break caused by commit ba7fcb0c9549 ("[media] media: vb2: dma contig allocator:
use dma_addr instread of paddr").

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] altera-stapl: it is time to move out from staging

[mchehab@redhat.com: Fix a merge conflict]
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx23885: fix type error

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] move tm6000 to drivers/media/video

The serious bugs got fixed already.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Fix some CodingStyle issues

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ati_remote: update Kconfig description

The ati_remote driver supports more remotes nowadays, update the
description to reflect that.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ati_remote: add support for SnapStream Firefly remote

The protocol differs by having two toggle bits in the scancode. Since
one of the bits is otherwise unused, we can safely handle the bits
unconditionally.

[mchehab@redhat.com: Fix some bad whitespacing]
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ati_remote: add keymap for Medion X10 RF remote

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ati_remote: fix check for a weird byte

The ati_remote_dump() function tries to not print "Weird byte" warning
for 1-byte responses that contain 0xff or 0x00, but it doesn't work
properly as it simply falls back to the "Weird data" warning in the else
clause.

Fix that by adding an inner if clause.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ati_remote: parent input devices to usb interface

Parent the input devices to usb_interface instead of usb_device. This
fixes (at least) persistent input device nodes.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ati_remote: migrate to the rc subsystem

The keycode mangling algorithm is kept the same, so the new external
keymap has the same values as the old static table.

[mchehab@redhat.com: Fix some bad whitespacing]
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] move ati_remote driver from input/misc to media/rc

The driver will be migrated to the RC driver API in a following
commit.

[mchehab@redhat.com: Fix some bad whitespacing]
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] adp1653: set media entity type

The type of a media entity is default for this driver. This patch makes it
explicitly defined as MEDIA_ENT_T_V4L2_SUBDEV_FLASH.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] TVP7002: Changed register values

Register values changed according to the data sheet and Texas Instruments DaVinci_PSP_03_02_00_37.
- TVP7002_RGB_COARSE_CLAMP_CTL changed to the default value in data sheet.
  - TVP7002_HPLL_PHASE_SEL deleted because the registers write to reserved bits. The default value works fine.

Signed-off-by: Mats Randgaard <mats.randgaard@tandberg.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] TVP7002: Return V4L2_DV_INVALID if any of the errors occur

Signed-off-by: Mats Randgaard <mats.randgaard@tandberg.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] TT-budget S2-3200 cannot tune on HB13E DVBS2 transponder

The FEC fix patch fixed locking on 11,681 Ghz, but not on 12,692 Ghz for
me.

Reviewed-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] [2/2,ver,1.90] DM04/QQBOX Reduce USB buffer size

Reduced unused buffer size to 64.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] [1/2,ver,1.89] DM04/QQBOX Interupt Urb and Timing changes

Reduce buffer size of Interupt urb to 128 bytes and polling
interval to 8.

The devices buffer appears to only handle a maxium of 40 bytes.
If the buffer is full a slowing effect is noticed causing occasionnal
dropped streaming packets.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2: uvcvideo use after free bug fix

Unplugging uvc video camera trigger following oops:

eeepc kernel: [ 1393.500719] usb 3-2: USB disconnect, device number 4
eeepc kernel: [ 1393.504351] uvcvideo: Failed to resubmit video URB (-19).
eeepc kernel: [ 1495.428853] BUG: unable to handle kernel paging request at 6b6b6bcb
eeepc kernel: [ 1495.429017] IP: [<b0358d37>] dev_get_drvdata+0x17/0x20
eeepc kernel: [ 1495.429017] *pde = 00000000
eeepc kernel: [ 1495.429017] Oops: 0000 [#1] DEBUG_PAGEALLOC
eeepc kernel: [ 1495.429017]
eeepc kernel: [ 1495.429017] Pid: 3476, comm: cheese Not tainted 3.1.0-rc3-00270-g7a54f5e-dirty #485 ASUSTeK Computer INC. 900/900
eeepc kernel: [ 1495.429017] EIP: 0060:[<b0358d37>] EFLAGS: 00010202 CPU: 0
eeepc kernel: [ 1495.429017] EIP is at dev_get_drvdata+0x17/0x20
eeepc kernel: [ 1495.429017] EAX: 6b6b6b6b EBX: eb08d870 ECX: 00000000 EDX: eb08d930
eeepc kernel: [ 1495.429017] ESI: eb08d870 EDI: eb08d870 EBP: d3249cac ESP: d3249cac
eeepc kernel: [ 1495.429017]  DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
eeepc kernel: [ 1495.429017] Process cheese (pid: 3476, ti=d3248000 task=df46d870 task.ti=d3248000)
eeepc kernel: [ 1495.429017] Stack:
eeepc kernel: [ 1495.429017]  d3249cb8 b03e77a1 d307b840 d3249ccc b03e77d1 d307b840 eb08d870 eb08d830
eeepc kernel: [ 1495.429017]  d3249ce4 b03ed3b7 00000246 d307b840 eb08d870 d3021b80 d3249cec b03ed565
eeepc kernel: [ 1495.429017]  d3249cfc b03e044d e8323d10 b06e013c d3249d18 b0355fb9 fffffffe d3249d1c
eeepc kernel: [ 1495.429017] Call Trace:
eeepc kernel: [ 1495.429017]  [<b03e77a1>] v4l2_device_disconnect+0x11/0x30
eeepc kernel: [ 1495.429017]  [<b03e77d1>] v4l2_device_unregister+0x11/0x50
eeepc kernel: [ 1495.429017]  [<b03ed3b7>] uvc_delete+0x37/0x110
eeepc kernel: [ 1495.429017]  [<b03ed565>] uvc_release+0x25/0x30
eeepc kernel: [ 1495.429017]  [<b03e044d>] v4l2_device_release+0x9d/0xc0
eeepc kernel: [ 1495.429017]  [<b0355fb9>] device_release+0x19/0x90
eeepc kernel: [ 1495.429017]  [<b03adfdc>] ? usb_hcd_unlink_urb+0x7c/0x90
eeepc kernel: [ 1495.429017]  [<b026b99c>] kobject_release+0x3c/0x90
eeepc kernel: [ 1495.429017]  [<b026b960>] ? kobject_del+0x30/0x30
eeepc kernel: [ 1495.429017]  [<b026ca4c>] kref_put+0x2c/0x60
eeepc kernel: [ 1495.429017]  [<b026b88d>] kobject_put+0x1d/0x50
eeepc kernel: [ 1495.429017]  [<b03b2385>] ? usb_autopm_put_interface+0x25/0x30
eeepc kernel: [ 1495.429017]  [<b03f0e5d>] ? uvc_v4l2_release+0x5d/0xd0
eeepc kernel: [ 1495.429017]  [<b0355d2f>] put_device+0xf/0x20
eeepc kernel: [ 1495.429017]  [<b03dfa96>] v4l2_release+0x56/0x60
eeepc kernel: [ 1495.429017]  [<b019c8dc>] fput+0xcc/0x220
eeepc kernel: [ 1495.429017]  [<b01990f4>] filp_close+0x44/0x70
eeepc kernel: [ 1495.429017]  [<b012b238>] put_files_struct+0x158/0x180
eeepc kernel: [ 1495.429017]  [<b012b100>] ? put_files_struct+0x20/0x180
eeepc kernel: [ 1495.429017]  [<b012b2a0>] exit_files+0x40/0x50
eeepc kernel: [ 1495.429017]  [<b012b9e7>] do_exit+0x5a7/0x660
eeepc kernel: [ 1495.429017]  [<b0135f72>] ? __dequeue_signal+0x12/0x120
eeepc kernel: [ 1495.429017]  [<b055edf2>] ? _raw_spin_unlock_irq+0x22/0x30
eeepc kernel: [ 1495.429017]  [<b012badc>] do_group_exit+0x3c/0xb0
eeepc kernel: [ 1495.429017]  [<b015792b>] ? trace_hardirqs_on+0xb/0x10
eeepc kernel: [ 1495.429017]  [<b013755f>] get_signal_to_deliver+0x18f/0x570
eeepc kernel: [ 1495.429017]  [<b01020f7>] do_signal+0x47/0x9e0
eeepc kernel: [ 1495.429017]  [<b055edf2>] ? _raw_spin_unlock_irq+0x22/0x30
eeepc kernel: [ 1495.429017]  [<b015792b>] ? trace_hardirqs_on+0xb/0x10
eeepc kernel: [ 1495.429017]  [<b0123300>] ? T.1034+0x30/0xc0
eeepc kernel: [ 1495.429017]  [<b055c45f>] ? schedule+0x29f/0x640
eeepc kernel: [ 1495.429017]  [<b0102ac8>] do_notify_resume+0x38/0x40
eeepc kernel: [ 1495.429017]  [<b055f154>] work_notifysig+0x9/0x11
eeepc kernel: [ 1495.429017] Code: e5 5d 83 f8 01 19 c0 f7 d0 83 e0 f0 c3 8d b4 26 00 00 00 00 55 85 c0 89 e5 75 09 31 c0 5d c3 90 8d 74 26 00 8b 40 04 85 c0 74 f0 <8b> 40 60 5d c3 8d 74 26 00 55 89 e5 53 89 c3 83 ec 04 8b 40 04
eeepc kernel: [ 1495.429017] EIP: [<b0358d37>] dev_get_drvdata+0x17/0x20 SS:ESP 0068:d3249cac
eeepc kernel: [ 1495.429017] CR2: 000000006b6b6bcb
eeepc kernel: [ 1495.466975] uvcvideo: Failed to resubmit video URB (-27).
eeepc kernel: [ 1495.467860] uvcvideo: Failed to resubmit video URB (-27).
eeepc kernel: last message repeated 3 times
eeepc kernel: [ 1495.512610] ---[ end trace 73ec16848794e5a5 ]---

For uvc device, dev->vdev.dev is the &intf->dev,
uvc_delete code is as below:
usb_put_intf(dev->intf);
usb_put_dev(dev->udev);

uvc_status_cleanup(dev);
uvc_ctrl_cleanup_device(dev);

if (dev->vdev.dev)
v4l2_device_unregister(&dev->vdev);

Fix it by get_device in v4l2_device_register and put_device in v4l2_device_disconnect

Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: Fix em28xx_devused cleanup logic on error

On 04/09/11 00:49, Mauro Carvalho Chehab wrote:
> This is an automatic generated email to let you know that the following patch were queued at the
> http://git.linuxtv.org/media_tree.git tree:
>
> Subject: [media] em28xx: use atomic bit operations for devices-in-use mask
> Author:  Chris Rankin<rankincj@yahoo.com>
> Date:    Sat Aug 20 08:21:03 2011 -0300
>
> Use atomic bit operations for the em28xx_devused mask, to prevent an
> unlikely race condition should two adapters be plugged in
> simultaneously. The operations also clearer than explicit bit
> manipulation anyway.
>
> Signed-off-by: Chris Rankin<rankincj@yahoo.com>
> Signed-off-by: Mauro Carvalho Chehab<mchehab@redhat.com>
>
>   drivers/media/video/em28xx/em28xx-cards.c |   33 ++++++++++++++---------------

I think you missed this line in the merge.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Enable fast USB quirk on Cinergy Hybrid

The Cinergy Hybrid cards are known not to need an artificial delay after
USB accesses so the quirk can safely be enabled.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tm6000: Add fast USB access quirk

Some devices support fast access to registers using the USB interface
while others require a certain delay after each operation. This commit
adds a quirk that can be enabled by devices that don't need the delay.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mt9t001: Aptina (Micron) MT9T001 3MP sensor driver

The MT9T001 is a parallel 3MP sensor from Aptina (formerly Micron)
controlled through I2C.

The driver creates a V4L2 subdevice. It currently supports binning and
cropping, and the gain, exposure, test pattern and black level controls.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] omap3isp: video: Avoid crashes when pipeline set stream operation fails

If streaming can't be enabled on the pipeline, the DMA buffers queue is
not emptied. If the buffers then get freed the queue will end up
referencing free memory. This is usually not an issue, as the DMA queue
will be reinitialized the next time streaming is enabled, before
enabling the hardware.

However, if the sensor connected at the pipeline input is free-running,
the CCDC will start generating interrupts as soon as it gets powered up,
before the streaming gets enabled on the hardware. This will make the
CCDC interrupt handler access freed memory, causing a crash.

Reinitialize the DMA buffers queue in isp_video_streamon() if the error
path to make sure this situation won't happen.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] omap3isp: Don't fail streamon when the sensor doesn't implement s_stream

The code handles subdevs with no s_stream operation correctly, but
returns -ENOIOCTLCMD by mistake if the first subdev in the chain has no
s_stream operation. Return 0 in that case.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] media: s5p-mfc: fix section mismatch

Fix section mismatch in the MFC driver.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] [-mmotm] media: video/adp1653.c needs module.h

adp1653.c uses interfaces that are provided by <linux/module.h>
and needs to include that header file to fix build errors.

and more.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] imon: don't parse scancodes until intf configured

The imon devices have either 1 or 2 usb interfaces on them, each wired
up to its own urb callback. The interface 0 urb callback is wired up
before the imon context's rc_dev pointer is filled in, which is
necessary for imon 0xffdc device auto-detection to work properly, but we
need to make sure we don't actually run the callback routines until
we've entirely filled in the necessary bits for each given interface,
lest we wind up oopsing. Technically, any imon device could have hit
this, but the issue is exacerbated on the 0xffdc devices, which send a
constant stream of interrupts, even when they have no valid key data.

CC: Andy Walls <awalls@md.metrocast.net>
CC: Chris W <lkml@psychogeeks.com>
Reported-by: Chris W <lkml@psychogeeks.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] STV0288 frontend provide wider carrier search and DVB-S2 drop out. resend

The following patch provides wider carrier search.

As with existing code search starts at MSB aligned. The boundary
is widened to start at -9.  In order to save time, if no carrier is
detected at the start it advances to the next alignment until carrier
is found.

The stv0288 will detect a DVB-S2 carrier on all steps , a
time out of 11 steps is introduced to drop out of the loop.

In stv0288_set_symbol carrier and timing loops are restored to
default values (inittab) before setting the symbol rate on each tune. A
slight drift was noticed with full scan in the higher IF frequencies of
each band.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] noon010pc30: Remove g_chip_ident operation handler

It is now not needed as the sensor identification is done
through the media controller API.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l: Move SR030PC30, NOON010PC30, M5MOLS drivers to the right location

SR030PC30, NOON010PC30, M5MOLS are camera sensors so better place
for them is under the "Camera sensors" Kconfig section.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] noon010pc30: Improve s_power operation handling

Remove the now unneeded check for the platform data in s_power
handler and the platform data pointer in struct noon010_info.
Also do not reset the configured output resolution and pixel
format when cycling sensor's power.
Add small delay for proper reset signal shape.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] noon010pc30: Conversion to the media controller API

Replace g/s_mbus_fmt ops with the pad level get/set_fmt operations.
Add media entity initialization and set subdev flags so the host driver
creates a subdev device node for the driver.
A mutex was added for serializing the subdev operations. When setting
format is attempted during streaming an (EBUSY) error will be returned.

After the device is powered up it will now remain in "power sleep"
mode until s_stream(1) is called. The "power sleep" mode is used
to suspend/resume frame generation at the sensor's output through
s_stream op.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] davinci vpbe: Use resource_size()

 Use resource_size function on resource object
 instead of explicit computation.

 The semantic patch that makes this output is available
 in scripts/coccinelle/api/resource_size.cocci.

 More information about semantic patching is available at
 http://coccinelle.lip6.fr/

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mt9m111: move lastpage to struct mt9m111 for multi instances

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] sr030pc30: Remove empty s_stream op

s_stream does nothing in current form so remove it.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7115: use the new auto cluster support

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] pwc: add support for VIDIOC_LOG_STATUS

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] vivi: add support for VIDIOC_LOG_STATUS

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] pwc: switch to the new auto-cluster volatile handling

Now that the auto cluster core changed to a different scheme of how to
handle volatile controls (including how to switch from auto to manual mode)
the pwc code can be simplified to use that new core support.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2-controls.txt: update auto cluster documentation

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2-ctrls: implement new volatile autocluster scheme

The problem tackled in this patch is how to handle volatile autoclusters
correctly. A volatile autocluster is a cluster of related controls where one
control is the control that toggles between manual and auto mode and the other
controls are the values for the manual mode. For example autogain and gain,
autoexposure and exposure, etc.

If the hardware lets you read out the automatically calculated manual values
while in automode, then those manual controls should be marked volatile.

gain value as calculated by the autogain circuitry, then you would mark the
gain control as volatile (i.e. continuously changing).

The question in such use cases is what to do when switching from the auto
mode to the manual mode. Should we switch to the last set manual values or
should the volatile values be copied and used as the initial manual values.

For example: suppose the mode is manual gain and gain is set to 5. Then
autogain is turned on and the gain is set by the hardware to 2. Finally
the user switches back to manual gain. What should the gain be? 2 or 5?

After a long discussion the decisions was made to keep the last value as
calculated by the auto mode (so 2 in the example above).

The reason is that webcams that do such things will adapt themselves to
the current light conditions and when you switch back to manual mode you
expect that you keep the same picture. If you would switch back to old
manual values, then that would give you a suddenly different picture,
which is jarring for the user.

Additionally, this would be difficult to implement in applications that
store and restore the control values at application exit and start.

If you want to keep the old manual values when you switch from auto to
manual, then there would have to be a way for applications to get hold
of those old values while in auto mode, but there isn't.

So this patch will do all the heavy lifting in v4l2-ctrls.c: if you go
from auto mode to manual mode and the manual controls are volatile, then
g_volatile_ctrl will be called to get the current values for the manual
controls before switching to manual mode.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] saa7164: Adding support for HVR2200 card id 0x8953

Thanks to Greg Tangey for prompting me to merge this.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] get_dvb_firmware: whitespace fix

it9135 was the only one intended with spaces as others are tabs.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tda10071: change sleeps to more suitable ones

msleep() => usleep_range()

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tda10071: do not download last byte of fw

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: ERROR: "em28xx_add_into_devlist" [drivers/media/video/em28xx/em28xx.ko] undefined!

Signed-off-by: Chris Rankin <rankincj@yahoo.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] get_dvb_firmware: update tda10071 file url

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] get_dvb_firmware: add dvb-fe-tda10071.fw

TDA10071 firmware version 1.21.31.2

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] opera1: fix ERROR: do not use assignment in if condition

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] m920x: fix ERROR: do not use assignment in if condition

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] digitv: fix ERROR: do not use assignment in if condition

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dibusb-mb: fix ERROR: do not use assignment in if condition

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dibusb-common: fix ERROR: do not use assignment in if condition

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cxusb: fix ERROR: do not use assignment in if condition

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dvb-usb-dvb: ERROR: space required after that ','

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] ttusb2: fix ERROR: space required after that ','

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dibusb-mb: fix ERROR: space required after that ','

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dibusb-common: fix ERROR: space required after that ','

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib0700: fix ERROR: space required after that ','

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib0700: fix ERROR: space required before that '&'

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib0700: fix WARNING: suspect code indent for conditional statements

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] dib0700: fix WARNING: please, no spaces at the start of a line

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mxl111sf: use adap->num_frontends_initialized to determine which frontend is being attached

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] em28xx: add support for PCTV DVB-S2 Stick 460e [2013:024f]

It is based of...
* Empia EM28174
* NXP TDA10071 & Conexant CX24118A combo
* Allegro A8293

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] tda10071: NXP TDA10071 DVB-S/S2 driver

NXP TDA10071 DVB-S/S2 demodulator & Conexant CX24118A tuner combo driver

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] a8293: Allegro A8293 SEC driver

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] v4l2-ctrls: replace is_volatile with V4L2_CTRL_FLAG_VOLATILE

With the new flag there is no need anymore to have a separate is_volatile
field. Modify all users to use the new flag.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] videodev2.h: add V4L2_CTRL_FLAG_VOLATILE

Add a new VOLATILE control flag that is set for volatile controls.
That way applications know whether the value of the control is volatile
(i.e. can change continuously) or not.

Until now this was an internal property, but it is useful to know in
userspace as well.

A typical use case is the gain value when autogain is on. In that case the
hardware will continuously adjust the gain based various environmental
factors.

This patch just adds and documents the flag, it's not yet used.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers/media/video/stk-webcam.c: coding style issue

checkpatch.pl gave some coding style errors, so on the way to the first
patch I added the fix to them.

Signed-off-by: Arvydas Sidorenko <asido4@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] drivers/media/video/stk-webcam.c: webcam LED bug fix

The probem was on my DC-1125 webcam chip from Syntek. Whenever the webcam turns
on, the LED light on it is turn on also and never turns off again unless system
is shut downed or restarted.

This patch will fix this issue - the LED will be turned off whenever the device
is released.

Signed-off-by: Arvydas Sidorenko <asido4@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] mmp_camera: add MODULE_ALIAS

This enables module autoloading.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] cx18: Fix videobuf capture

When we moved to 3.0, we found that the cx18 driver was oopsing on close with:

NULL pointer deref at:

[ 2290.461009] Call Trace:
[ 2290.461009]  [<c046007b>] ? pm_qos_add_request+0xc/0x6e
[ 2290.461009]  [<c082631c>] __mutex_lock_common+0x87/0x125
[ 2290.461009]  [<f8970e92>] ? cx18_queue_flush+0x31/0x87 [cx18]
[ 2290.461009]  [<c0436b85>] ? __might_sleep+0x29/0xe4
[ 2290.461009]  [<c0826515>] __mutex_lock_slowpath+0x25/0x27
[ 2290.461009]  [<c08264b2>] ? mutex_lock+0x2e/0x3b
[ 2290.461009]  [<c08264b2>] mutex_lock+0x2e/0x3b
[ 2290.461009]  [<f88d3137>] videobuf_queue_lock+0x13/0x15 [videobuf_core]
[ 2290.461009]  [<f88d3f86>] __videobuf_free+0xfc/0x112 [videobuf_core]
[ 2290.461009]  [<f89741e6>] cx18_v4l2_close+0x158/0x172 [cx18]
[ 2290.461009]  [<c0507522>] ? cpumask_next+0x1a/0x1d
[ 2290.461009]  [<f88a319d>] v4l2_release+0x35/0x52 [videodev]
[ 2290.461009]  [<c04f5717>] fput+0x100/0x1a5
[ 2290.461009]  [<c04f2e09>] filp_close+0x5c/0x64
[ 2290.461009]  [<c04f2e70>] sys_close+0x5f/0x93
[ 2290.461009]  [<c082cd5f>] sysenter_do_call+0x12/0x28

Some digging showed that a merge at some previous point partially
added broken mmap() support, causing this trace. Remove the broken
code completely.

On top of that, the calculation in place for "buffer full" depended on
UYUV instead of HM12, while our GStreamer code was picking HM12 in
some circumstances.

Finally, the V4L2_CAP_STREAMING capability was never exposed. Patch it
into the YUV encoder node only.

Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

[media] EM28xx - Fix memory leak on disconnect or error

Release the dev->alt_max_pkt_size buffer in all cases.

Signed-off-by: Chris Rankin <rankincj@yahoo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Merge tag 'v3.1-rc6' into staging/for_v3.2

* tag 'v3.1-rc6': (1902 commits)
  Linux 3.1-rc6
  ioctl: register LTTng ioctl
  fuse: fix memory leak
  fuse: fix flock breakage
  Btrfs: add dummy extent if dst offset excceeds file end in
  Btrfs: calc file extent num_bytes correctly in file clone
  btrfs: xattr: fix attribute removal
  Btrfs: fix wrong nbytes information of the inode
  Btrfs: fix the file extent gap when doing direct IO
  Btrfs: fix unclosed transaction handle in btrfs_cont_expand
  Btrfs: fix misuse of trans block rsv
  Btrfs: reset to appropriate block rsv after orphan operations
  Btrfs: skip locking if searching the commit root in csum lookup
  btrfs: fix warning in iput for bad-inode
  Btrfs: fix an oops when deleting snapshots
  [media] vp7045: fix buffer setup
  [media] nuvoton-cir: simplify raw IR sample handling
  [media] [Resend] viacam: Don't explode if pci_find_bus() returns NULL
  [media] v4l2: Fix documentation of the codec device controls
  [media] gspca - sonixj: Fix the darkness of sensor om6802 in 320x240
  ...

Linux 3.1-rc6

Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm: Remove duplicate "return" statement
  drm/nv04/crtc: Bail out if FB is not bound to crtc
  drm/nouveau: fix nv04_sgdma_bind on non-"4kB pages" archs
  drm/nouveau: properly handle allocation failure in nouveau_sgdma_populate
  drm/nouveau: fix oops on pre-semaphore hardware
  drm/nv50/crtc: Bail out if FB is not bound to crtc
  drm/radeon/kms: fix DP detect and EDID fetch for DP bridges

Merge branch 'fixes' of git://git.linaro.org/people/arnd/arm-soc

* 'fixes' of git://git.linaro.org/people/arnd/arm-soc:
  ARM: CSR: add missing sentinels to of_device_id tables
  ARM: cns3xxx: Fix newly introduced warnings in the PCIe code
  ARM: cns3xxx: Fix compile error caused by hardware.h removed
  ARM: davinci: fix cache flush build error
  ARM: davinci: correct MDSTAT_STATE_MASK
  ARM: davinci: da850 EVM: read mac address from SPI flash
  OMAP: omap_device: fix !CONFIG_SUSPEND case in _noirq handlers
  OMAP2430: hwmod: musb: add missing terminator to omap2430_usbhsotg_addrs[]
  OMAP3: clock: indicate that gpt12_fck and wdt1_fck are in the WKUP clockdomain
  OMAP4: clock: fix compile warning
  OMAP4: clock: re-enable previous clockdomain enable/disable sequence
  OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup
  OMAP: powerdomains: Make all powerdomain target states as ON at init