drm/i915/gen11: Disable cursor clock gating in HDR mode

Display underrun in HDR mode when cursor is enabled.
RTL fix will be implemented CLKGATE_DIS_PSL_A bit 28-46520h.
As per W/A 1604331009, Disable cursor clock gating in HDR mode.

Bspec : 33451

Changes since V6:
        - Address checkpatch warnings
        - Bit ordering
Changes since V5:
        - replace intel_de_read with intel_de_rmw - Jani
Changes since V4:
        - Added WA needed check - Ville
        - Replace BIT with REG_BIT - Ville
        - Add WA enable/disable support back which was
          added in V1 - Ville
Changes since V3:
        - Disable WA when not in HDR mode or cursor plane
          not active - Ville
        - Extract required args from crtc_state - Ville
        - Create HDR mode API using bdw_set_pipemisc ref - Ville
        - Tested with HDR video as well full setmode, WA
          applies and disables
Changes since V2:
        - Made it general gen11 WA
        - Removed WA needed check
        - Added cursor plane active check
        - Once WA enable, software will not disable
Changes since V1:
        - Modified way CLKGATE_DIS_PSL bit 28 was modified

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210929052442.2543054-1-tejaskumarx.surendrakumar.upadhyay@intel.com

drm/i915: constify display wm vtable

Use a nop table for the cases where CxSR doesn't init properly.

v2: use a nop table (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bb0658d14afd02cca692cd58223800f68f4ff4ce.1632869550.git.jani.nikula@intel.com

drm/i915: constify clock gating init vtable.

I used a macro to avoid making any really silly mistakes here.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7c97f7e5ab0eae3c4cd7ce8344254356c34f3ad6.1632869550.git.jani.nikula@intel.com

drm/i915: constify display function vtable

Make nice clear tables instead of having things in two places.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d0f7e2c792dc40804555d26b6ede62f4bd2f23d6.1632869550.git.jani.nikula@intel.com

drm/i915: drop unused function ptr and comments.

There was some excess comments and an unused vtbl ptr.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/573a9366d33e2b7bd7b8215af614f03f3e562926.1632869550.git.jani.nikula@intel.com

drm/i915: constify the cdclk vtable

This is a bit of a twisty one since each platform is slightly
different, so might take some more review care.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/75e0139b28cca9ceff77de72c3ef737c101255ba.1632869550.git.jani.nikula@intel.com

drm/i915: constify the dpll clock vtable

Most the dpll vtable into read-only memory.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0414a27317de3f335a8453a29486b746aa6862e7.1632869550.git.jani.nikula@intel.com

drm/i915: constify the audio function vtable

Move the functions into read-only tables.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5a481307a5daab40a506c3b9a64b0b37e01a1a41.1632869550.git.jani.nikula@intel.com

drm/i915: constify color function vtable.

This clarifies quite well what functions get used on what platforms
instead of having to decipher the old tree.

v2: fixed IVB mistake (Jani)

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/49e46e61206d4fdcf08fb5dc1978da3fce702134.1632869550.git.jani.nikula@intel.com

drm/i915: constify hotplug function vtable.

Use a macro to avoid mistakes, this type of macro is only used
in a couple of places.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/af229c1e8ec894f177b344ab77b90e32c33428de.1632869550.git.jani.nikula@intel.com

drm/i915: constify fdi link training vtable

Put the vtable into ro memory.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ec4687956f9b98024fea55b2f0ed1e192e244ff1.1632869550.git.jani.nikula@intel.com

drm/i915: split the dpll clock compute out from display vtable.

this single function might be possible to merge later, but
for now it's simple to just split it out.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba570aa10b694b2e8640e0c58430fd0053c306b7.1632869550.git.jani.nikula@intel.com

drm/i915: split fdi link training from display vtable.

It may make sense to merge this with display again later,
however the fdi use of the vtable is limited to only a
few generations.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7af7359b6cec33bd2d32152893d9a1e8f8cf7f21.1632869550.git.jani.nikula@intel.com

drm/i915: split irq hotplug function from display vtable

This provide a service from irq to display, so make it separate

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/05f533064709764dff8bcfef6a58f9a8482dc5bb.1632869550.git.jani.nikula@intel.com

drm/i915: split cdclk functions from display vtable.

This moves all the cdclk related functions into their own vtable.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/591b7b6a79c4ab644a161ae00b7d630b3ef16434.1632869550.git.jani.nikula@intel.com

drm/i915: split audio functions from display vtable

These are only used internally in the audio code

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d12257cc7685a9b52618f7da444ba1fc8848b4db.1632869550.git.jani.nikula@intel.com

drm/i915: split color functions from display vtable

These are only used internally in the color module

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/084a31362f1621d2f556069bb2bc47d362a63823.1632869550.git.jani.nikula@intel.com

drm/i915: split watermark vfuncs from display vtable.

These are the watermark api between display and pm.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7130356324ef3de59b4e913f025d7dce822157ee.1632869550.git.jani.nikula@intel.com

drm/i915: split clock gating init from display vtable

This function is only used inside intel_pm.c

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/95d626a7329ab5779804762894e304e12c6dbe1f.1632869550.git.jani.nikula@intel.com

drm/i915/display: add intel_fdi_link_train wrapper.

This wraps the fdi link training vfunc to make it clearer.

Suggested by Jani.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1bb978bcb6f16fbdaf08f2800a179b774525b59e.1632869550.git.jani.nikula@intel.com

drm/i915: add wrappers around cdclk vtable funcs.

This adds wrappers around all the vtable callers so they are in
one place.

Suggested by Jani.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c3dd7aaad039e76acde9dda7211468907aa657c0.1632869550.git.jani.nikula@intel.com

drm/i915/wm: provide wrappers around watermark vfuncs calls (v3)

This moves one wrapper from the pm->display side, and creates
wrappers for all the others, this should simplify things later.

One thing to note is that the code checks the existence of some
of these ptrs, so the wrappers are a bit complicated by that.

Suggested by Jani.

v2: fixup warnings in wrong place error.

v3 by Jani: fix intel_compute_global_watermarks() return value check

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ee2760c45896568c9dd9114a575509619bd44ef2.1632869550.git.jani.nikula@intel.com

drm/i915: make update_wm take a dev_priv.

The crtc was never being used here.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/70438bface47fa683cda8a9e95d0556fca448172.1632869550.git.jani.nikula@intel.com

drm/i915/pm: drop get_fifo_size vfunc.

The i845_update_wm code was always calling the i845 variant,
and the i9xx_update_wm had only a choice between i830 and i9xx
paths, hardly worth the vfunc overhead.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/07523b1e46cd10adb2991ed4d2619b542a48c1ce.1632869550.git.jani.nikula@intel.com

drm/i915/uncore: split the fw get function into separate vfunc

constify it while here. drop the put function since it was never
overloaded and always has done the same thing, no point in
indirecting it for show.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/41c3e1896162fc08e22e40b00642791365a8c00e.1632869550.git.jani.nikula@intel.com

drm/i915/display: Fix the dsc check while selecting min_cdclk

The right parameter that selects second dsc engine is dsc_split.
Hence use dsc_split instead of slice_count while selecting the
cdclk in order to accommodate 1ppc limitaion of vdsc.

Fixes: fe01883fdcef ("drm/i915: Get proper min cdclk if vDSC enabled")
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210915054338.29869-1-vandita.kulkarni@intel.com

drm/i915/audio: Use BIOS provided value for RKL HDA link

Commit 989634fb49ad ("drm/i915/audio: set HDA link parameters in
driver") makes HDMI audio on Lenovo P350 disappear.

So in addition to TGL, extend the logic to RKL to use BIOS provided
value to fix the regression.

Fixes: 989634fb49ad ("drm/i915/audio: set HDA link parameters in driver")
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906041300.508458-1-kai.heng.feng@canonical.com

drm/i915/fbc: Allow higher compression limits on FBC1

On FBC1 we can specify an arbitrary cfb stride. The hw will
simply throw away any compressed line that would exceed the
specified limit and keep using the uncompressed data instead.
Thus we can allow arbitrary compression limits.

The one thing we have to keep in mind though is that the cfb
stride is specified in units of 32B (gen2) or 64B (gen3+).
Fortunately X-tile is already 128B (gen2) or 512B (gen3+) wide
so as long as we limit outselves to the same 4x compression
limit that FBC2 has we are guaranteed to have a sufficiently
aligned cfb stride.

Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921152517.803-5-ville.syrjala@linux.intel.com

drm/i915/fbc: Implement Wa_16011863758 for icl+

There's some kind of weird corner cases in FBC which requires
FBC segments to be separated by at least one extra cacheline.
Make sure that is present.

v2: Respin to fit in with skl_fbc_min_cfb_stride()
v3: Make it build

Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921181245.15091-1-ville.syrjala@linux.intel.com

drm/i915/fbc: Align FBC segments to 512B on glk+

Apply the same 512 byte FBC segment alignment to glk+ as we use
on skl+. The only real difference is that we now have a dedicated
register for the FBC override stride. Not 100% sure which
platforms really need the 512B alignment, but it's easiest
to just do it on everything.

Also the hardware no longer seems to misclaculate the CFB stride
for linear, so we can omit the use of the override stride for
linear unless the stride is misaligned.

Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921152517.803-3-ville.syrjala@linux.intel.com

drm/i915/fbc: Rework cfb stride/size calculations

The code to calculate the cfb stride/size is a bit of mess.
The cfb size is getting calculated based purely on the plane
stride and plane height. That doesn't account for extra
alignment we want for the cfb stride. The gen9 override
stride OTOH is just calculated based on the plane width, and
it does try to make things more aligned but any extra alignment
added there is not considered in the cfb size calculations.
So not at all convinced this is working as intended. Additionally
the compression limit handling is split between the cfb allocation
code and g4x_dpfc_ctl_limit() (for the 16bpp case), which is just
confusing.

Let's streamline the whole thing:
- Start with the plane stride, convert that into cfb stride (cfb is
  always 4 bytes per pixel). All the calculations will assume 1:1
  compression limit since that will give us the max values, and we
  don't yet know how much stolen memory we will be able to allocate
- Align the cfb stride to 512 bytes on modern platforms. This guarantees
  the 4 line segment will be 512 byte aligned regardles of the final
  compression limit we choose later. The 512 byte alignment for the
  segment is required by at least some of the platforms, and just doing
  it always seems like the easiest option
- Figure out if we need to use the override stride or not. For X-tiled
  it's never needed since the plane stride is already 512 byte aligned,
  for Y-tiled it will be needed if the plane stride is not a multiple
  of 512 bytes, and for linear it's apparently always needed because the
  hardware miscalculates the cfb stride as PLANE_STRIDE*512 instead of
  the PLANE_STRIDE*64 that it use with linear.
- The cfb size will be calculated based on the aligned cfb stride to
  guarantee we actually reserved enough stolen memory and the FBC hw
  won't end up scribbling over whatever else is allocated in stolen
- The compression limit handling we just do fully in the cfb allocation
  code to make things less confusing

v2: Write the min cfb segment stride calculation in a more
    explicit way to make it clear what is going on
v3: Remeber to update fbc->limit when changing to 16bpp

Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v2
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923042151.19052-1-ville.syrjala@linux.intel.com

drm/i915: Fix HPLL watermark readout for g4x

If HPLL watermarks are already enabled, let's not mark them as
disabled by forgetting to bump 'level' before we call
g4x_raw_plane_wm_set().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514125751.17075-6-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915/display: Only keep PSR enabled if there is active planes

PSR always had a requirement to only be enabled if there is active
planes but not following that never caused any issues.
But that changes in Alderlake-P, leaving PSR enabled without
active planes causes transcoder/port underruns.

Similar behavior was fixed during the pipe disable sequence by
commit 84030adb9e27 ("drm/i915/display: Disable audio, DRRS and PSR before planes").

intel_dp_compute_psr_vsc_sdp() had to move from
intel_psr_enable_locked() to intel_psr_compute_config() because we
need to be able to disable/enable PSR from atomic states without
connector and encoder state.

Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922215242.66683-3-jose.souza@intel.com

drm/i915/display: Match PSR2 selective fetch sequences with specification

We were not completely following the selective fetch programming
sequence, here some things we were doing wrong:
- not programming plane selective fetch a PSR2_MAN_TRK_CTL registers
when doing a modeset
- programming PSR2_MAN_TRK_CTL out of vblank

With this changes the last remainig underrun found in Alderlake-P is
fixed.

Bspec: 55229
Tested-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922215242.66683-2-jose.souza@intel.com

drm/i915/display/dmc: Set DC_STATE_DEBUG_MASK_CORES after firmware load

Specification asks for DC_STATE_DEBUG_MASK_CORES to be set for all
platforms that supports DMC, not only for geminilake and broxton.

While at is also taking the oportunity to simply the code.

BSpec: 7402
BSpec: 49436
Reviewed-by: Imre Deak <imre.deak@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210922215242.66683-1-jose.souza@intel.com

drm/i915/adlp: Add support for remapping CCS FBs

Add support for remapping CCS FBs on ADL-P to remove the restriction
of the power-of-two sized stride and the 2MB surface offset alignment
for these FBs.

We can only remap the tiles on the main surface, not the tiles on the
CCS surface, so userspace has to generate the CCS surface aligning to
the POT size padded main surface stride (by programming the AUX
pagetable accordingly). For the required AUX pagetable setup, this
requires that either the main surface stride is 8 tiles or that the
stride is 16 tiles aligned (= 64 kbytes, the area mapped by one AUX
PTE).

v2:
- Init intel_remapped_info::plane_alignment only for remapped views and
  do this from intel_fb_view_init().

Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906182715.3915100-6-imre.deak@intel.com

drm/i915: Follow a new->old platform check order in intel_fb_stride_alignment

Follow the usual new->old order in intel_fb_stride_alignment() platform
check ladder.

Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906182715.3915100-5-imre.deak@intel.com

drm/i915/adlp: Assert that VMAs in DPT start at 0

Atm the DPT object can accommodate only one VMA, so the VMA offset will
be always 0. Add an assert for this.

Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906182715.3915100-4-imre.deak@intel.com

drm/i915/adlp: Require always a power-of-two sized CCS surface stride

At the moment CCS FB strides must be power-of-two sized, but a follow-up
change will add support remapping these FBs, allowing the FB passed in
by userspace to have a non-POT sized stride. For these remapped FBs we
can only remap the main surface, not the CCS surface. This means that
userspace has to always generate the CCS surface aligning to the POT
stride padded main surface (by setting up the CCS AUX pagetables
accordingly). Adjust the CCS surface stride check to enforce this.

No functional change.

v2:
- Fix the gen12_ccs_aux_stride() is not static sparse warning.

Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906182715.3915100-3-imre.deak@intel.com

drm/i915: Use tile block based dimensions for CCS origin x, y check

The tile size for all surface types is 4 kbyte (or 2 kbyte on old
platforms), with the exception of the TGL/ADL CCS surface where the tile
size is 64 bytes. To be able to remap CCS FBs the CCS surface tile needs
to be defined as 4 kbyte as well (the granularity of GTT pages in a
remapped view).

The only place using the dimension of the 64 byte CCS area is the initial
check for the main vs. CCS plane origin coordinate match. To prepare for
adding support for remapping CCS FBs let's call the 64 byte CCS area a
'tile block' and add a helper to retrieve the dimensions for it.

No functional change.

Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210906182715.3915100-2-imre.deak@intel.com

drm/i915: Apply WaUse32BppForSRWM to elk as well as ctg

The w/a database lists this for both ctg and elk. So let's apply it to
elk as well. And add the w/a name.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514125751.17075-5-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Fix g4x cxsr enable condition

The intention was to check whether the primary plane is enabled
without any sprites planes being enabled. Instead we ended up checking
whether just any one of the planes is enabled. g4x isn't vlv/chv and
cxsr only works with the primary plane. Fix the check to examine the
bitmask of active planes rather than the number of bits set in said
bitmask.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514125751.17075-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Use u8 consistently for active_planes bitmask

Be consistent in that active_planes bitmask fits in a u8.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514125751.17075-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: s/crtc_state/new_crtc_state/ etc.

intel_plane_atomic_calc_changes() deals with both the old and
new crtc/plane states. Make the variable names reflect that
more clearly.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514125751.17075-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915/display: Add HDR mode helper function

Add helper function with returns if HDR mode in on

Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210907113658.1351456-1-tejaskumarx.surendrakumar.upadhyay@intel.com
[vsyrjala: fix up alignment to match codingstyle]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/dg2: configure TRANS_DP2_VFREQ{HIGH,LOW} for 128b/132b

There's a new register pair for 128b/132b mode where you need to set the
pixel clock in Hz.

v2: Fix UHBR rate check, use intel_dp_is_uhbr() helper

Bspec: 54128
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a2902cc188973f022f282f2a77e693afdecefb5a.1631191763.git.jani.nikula@intel.com

drm/i915/dg2: use 128b/132b transcoder DDI mode

128b/132b has a separate transcoder DDI mode, which also requires the
MST transport select to be set. Note that we'll use DP MST also for
single-stream 128b/132b.

Having the FDI and 128b/132b modes share the register mode value
complicates things a bit.

v2:
- Use HAS_DP20 abstraction for 128b/132b mode (Ville)
- Use intel_dp_is_uhbr() helper

Bspec: 50493
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/279bfbd979e0256fae13a5231e07e2f4fb665c07.1631191763.git.jani.nikula@intel.com

drm/i915/dp: add HAS_DP20 macro

Let's abstract the DP 2.0 feature. Initially just DG2.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3746e700641bc17eff270569387fe869707d92ed.1631191763.git.jani.nikula@intel.com

drm/i915/dg2: configure TRANS_DP2_CTL for DP 2.0

Set the DP 2.0 128b/132b channel encoding for UHBR rates.

v2: Fix UHBR port clock check, use intel_dp_is_uhbr()

Bspec: 54128
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c88b08d80a96d1229ae941b296590633be4d8711.1631191763.git.jani.nikula@intel.com

drm/i915/dp: select 128b/132b channel encoding for UHBR rates

UHBR rates and 128b/132b channel encoding go hand in hand.

v2: Fix check for >= UHBR rates using intel_dp_is_uhbr() (Ville)

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b4ffd0187b306c0abaa08b89ed35c993ad8145c7.1631191763.git.jani.nikula@intel.com

drm/i915/dp: use 128b/132b TPS2 for UHBR+ link rates

128b/132b channel encoding has separate TPS1 and TPS2, although the DPCD
register values coincide with 8b/10b TPS1 and TPS2 values. Use 128b/132b
TPS2 for channel equalization.

v2: Use intel_dp_is_uhbr

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> # v1
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/723b29223dc570c8b63c3c6fe5fb772d9db06c0d.1631191763.git.jani.nikula@intel.com

drm/i915/dp: add helper for checking for UHBR link rate

Helpful abstraction to avoid duplication.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fe9a222ad900da797c989de9f7fa13928d2c9861.1631191763.git.jani.nikula@intel.com

drm/i915/dg2: add DG2+ TRANS_DDI_FUNC_CTL DP 2.0 128b/132b mode

Unfortunately, the DP 2.0 128b/132b DDI mode selection in the register
conflicts with FDI. Since we have to deal with both meanings in the same
code, for different platforms, clarify the macro name so we don't
forget.

Bspec: 50493
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/260e4da302d47ae50122eb8d517be6ac3ccb15f2.1631191763.git.jani.nikula@intel.com

drm/dp: add helper for extracting adjust 128b/132b TX FFE preset

The DP 2.0 128b/132b channel coding uses TX FFE presets instead of
vswing and pre-emphasis.

Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4ba129c51aeb01a5f210de7026abe704a554a178.1631191763.git.jani.nikula@intel.com

drm/dp: add LTTPR DP 2.0 DPCD addresses

DP 2.0 brings some new DPCD addresses for PHY repeaters.

Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/def17e2329722f22c35807be26b35590ccb93bfd.1631191763.git.jani.nikula@intel.com

drm/dp: use more of the extended receiver cap

Extend the use of extended receiver cap at 0x2200 to cover
MAIN_LINK_CHANNEL_CODING_CAP in 0x2206, in case an implementation hides
the DP 2.0 128b/132b channel encoding cap.

v2: Extend to DP_RECEIVER_CAP_SIZE (Ville)

Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/649051cb896821147feee91aab1f2abc523c1353.1631191763.git.jani.nikula@intel.com

drm/dp: add DP 2.0 UHBR link rate and bw code conversions

The bw code equals link_rate / 0.27 Gbps only for 8b/10b link
rates. Handle DP 2.0 UHBR rates as special cases, though this is not
pretty.

Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cab4edda8834d6b4db610fabb5e1f1f18ae33c2c.1631191763.git.jani.nikula@intel.com

drm/i915/display/adlp: Add new PSR2 workarounds

Wa_16014451276 fixes the starting coordinate for PSR2 selective
updates. CHICKEN_TRANS definition of the workaround bit has a wrong
name based on workaround definition and HSD.

Wa_14014971508 allows the screen to continue to be updated when
coming back from DC5/DC6 and SF_SINGLE_FULL_FRAME bit is not kept
set in PSR2_MAN_TRK_CTL.

Wa_16012604467 fixes underruns when exiting PSR2 when it is in one
of its internal states.

Wa_14014971508 is still in pending status in BSpec but by
the time this is reviewed and ready to be merged it will be finalized.

v2:
- renamed register to ADLP_1_BASED_X_GRANULARITY
- added comment about all ADL-P supported panels being 1 based X
granularity

BSpec: 54369
BSpec: 50054
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914212507.177511-5-jose.souza@intel.com

drm/i915/display/psr: Use drm damage helpers to calculate plane damaged area

drm_atomic_helper_damage_iter_init() + drm_atomic_for_each_plane_damage()
returns the full plane area in case no damaged area was set by
userspace or it was discarted by driver.

This is important to fix the rendering of userspace applications that
does frontbuffer rendering and notify driver about dirty areas but do
not set any dirty clips.

With this we don't need to worry about to check and mark the whole
area as damaged in page flips.

Another important change here is the move of
drm_atomic_add_affected_planes() call, it needs to called late
otherwise the area of all the planes would be added to pipe_clip and
not saving power.

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914212507.177511-4-jose.souza@intel.com

drm/i915/display: Workaround cursor left overs with PSR2 selective fetch enabled

Not sure why but when moving the cursor fast it causes some artifacts
of the cursor to be left in the cursor path, adding some pixels above
the cursor to the damaged area fixes the issue, so leaving this as a
workaround until proper fix is found.

This is reproducile on TGL and ADL-P.

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914212507.177511-3-jose.souza@intel.com

drm/i915/display: Wait at least 2 frames before selective update

BSpec states that the minimum number of frames before selective update
is 2, so making sure this minimum limit is fulfilled.

BSpec: 50422
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914212507.177511-2-jose.souza@intel.com

drm/i915/display/adlp: Fix PSR2_MAN_TRK_CTL_SU_REGION_END_ADDR calculation

As the SU_REGION_START begins at 0, the SU_REGION_END should be number
of lines - 1.

BSpec: 50424
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914212507.177511-1-jose.souza@intel.com

drm/i915/dmc: Update to DMC v2.12

The release notes mentions that this version-
1. Fix for unblock indication to punit.
2. Robustness fix for DC6/6v abort scenarios.

Cc: Imre Deak <Imre Deak <imre.deak@intel.com>>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914215732.67135-2-anusha.srivatsa@intel.com

drm/i915: Free all DMC payloads

Free all the DMC payloads, not just DMC_MAIN.

unreferenced object 0xffff88ff32d4d800 (size 1024):
  comm "kworker/1:5", pid 701, jiffies 4294904239 (age 109.736s)
  hex dump (first 32 bytes):
    40 40 00 0c 03 00 00 00 00 00 00 00 00 00 00 00  @@..............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000ba9d0d95>] dmc_load_work_fn+0x34d/0x510 [i915]
    [<000000001049fcab>] process_one_work+0x261/0x550
    [<00000000eeb995ac>] worker_thread+0x49/0x3c0
    [<0000000021031dc3>] kthread+0x10b/0x140
    [<000000004a0f69ee>] ret_from_fork+0x1f/0x30
unreferenced object 0xffff88ff0bde4000 (size 1024):
  comm "kworker/0:3", pid 708, jiffies 4294904469 (age 108.816s)
  hex dump (first 32 bytes):
    40 40 00 0c 01 00 00 00 00 00 00 00 00 00 00 00  @@..............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000ba9d0d95>] dmc_load_work_fn+0x34d/0x510 [i915]
    [<000000001049fcab>] process_one_work+0x261/0x550
    [<00000000eeb995ac>] worker_thread+0x49/0x3c0
    [<0000000021031dc3>] kthread+0x10b/0x140
    [<000000004a0f69ee>] ret_from_fork+0x1f/0x30

Fixes: 3d5928a168a9 ("drm/i915/xelpd: Pipe A DMC plugging")
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210809194805.3793060-1-lucas.demarchi@intel.com

drm/i915: Update memory bandwidth parameters

Earlier while calculating derated bw we would use 90% of the calculated
bw. Starting ADL-P we use a non standard derating. Updating the formulae
to reflect the same.

Bspec: 64631

v2: Use the new derating value only for ADL-P(MattR)

Fixes: 4d32fe2f14a7 ("drm/i915/adl_p: Update memory bandwidth parameters")
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210914220744.16042-1-radhakrishna.sripada@intel.com

drm/i915: Extract hsw_panel_transcoders()

Extract the "panel transcoder" bitmask into a helper. We'll
have a couple of uses for this later.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913144440.23008-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Adjust intel_dsc_power_domain() calling convention

Pass the crtc+cpu_transcoder rather than the crtc state to
intel_dsc_power_domain(). This should allow us to reuse it
during readout as well.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913144440.23008-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Introduce with_intel_display_power_if_enabled()

Add the _if_enabled() counterpart to with_intel_display_power().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913144440.23008-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: s/pipe/transcoder/ when dealing with PIPECONF/TRANSCONF

PIPECONF becamse TRANSCONF when HSW introduced the EDP transcoder.
Bigjoiner is making life even more confusing by introducing
a N:1 relationship between pipes and transcoders. In that case
we only enable/configure the transcoder corresponding to the
master pipe. Let's do some renames to make it clear we're dealing
with the transcoder rather than pipe when it comes to
PIPECONF/TRANSCONF.

I decided to leave the _cpu_ part out from the function/macro
names since the PCH transcoder related stuff already has a
_pch_ in their name. So shouldn't be possible to confuse them.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913144440.23008-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Flatten hsw_crtc_compute_clock()

hsw_crtc_compute_clock() has become spaghetti. Flatten
it a bit to make it at least semi-legible.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913144440.23008-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Extract intel_dp_need_bigjoiner()

Suck the "do we need bigjoiner?" checks into a helper instead of
duplicating them in two differentt places.

v2: s/use/need/ (Jani)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913144440.23008-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-next

Catch-up on 5.15-rc1 and sync with drm-intel-gt-next
to prepare the PXP topic branch.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/dg1: Add new PCI id

New DG1 PCI id.

BSpec: 44463
Cc: Caz Yokoyama <caz.yokoyama@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210913181909.35237-1-jose.souza@intel.com

drm/i915/edp: use MSO pixel overlap from DisplayID data

Now that we have MSO pixel overlap in display info, use it.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87d8d80ba205eb2ecb50f613219e0a821a842616.1630419362.git.jani.nikula@intel.com

drm/i915/edp: postpone MSO init until after EDID read

MSO will require segment pixel overlap information from the
EDID. Postpone MSO init until after we've read and cached the EDID.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7a360fca01be0f971337b3635f4e4752922ffebe.1630419362.git.jani.nikula@intel.com

drm/edid: parse the DisplayID v2.0 VESA vendor block for MSO

The VESA Organization Vendor-Specific Data Block, defined in VESA
DisplayID Standard v2.0, specifies the eDP Multi-SST Operation (MSO)
stream count and segment pixel overlap.

DisplayID v1.3 has Appendix B: DisplayID as an EDID Extension,
describing how DisplayID sections may be embedded in EDID extension
blocks. DisplayID v2.0 does not have such a section, perhaps implying
that DisplayID v2.0 data should not be included in EDID extensions, but
rather in a "pure" DisplayID structure at its own DDC address pair
A4h/A5h, as described in VESA E-DDC Standard v1.3 chapter 3.

However, in practice, displays out in the field have embedded DisplayID
v2.0 data blocks in EDID extensions, including, in particular, some eDP
MSO displays, where a pure DisplayID structure is not available at all.

Parse the MSO data from the DisplayID data block. Do it as part of
drm_add_display_info(), extending it to parse also DisplayID data to
avoid requiring extra calls to update the information.

v2: Check for VESA OUI (Ville)

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/73ca2887e7b37880690f5c9ba4594c9cd1170669.1630419362.git.jani.nikula@intel.com

drm/edid: abstract OUI conversion to 24-bit int

Replace the open coded OUI conversion from three bytes to a 24-bit int,
as we'll be adding one more user shortly. No functional changes.

Side note: CTA-861 format has the OUI bytes in reverse order.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2f43032d5f001510c7eed059321ceeb76d07a606.1630419362.git.jani.nikula@intel.com

drm/displayid: add DisplayID v2.0 data blocks and primary use cases

DisplayID v2.0 changes the data block identifiers and product types (now
called primary use cases).

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5a5c7e4477782c174f494947e2a2ea618b2b1ef2.1630419362.git.jani.nikula@intel.com

drm/displayid: re-align data block macros

Make the values easier to read. Also add DisplayID Structure version and
revision information (this is different from the spec version).

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b73d3ff2d5e4b23834ed0005186c5cf3a9de5c9e.1630419362.git.jani.nikula@intel.com

Linux 5.15-rc1

Merge tag 'perf-tools-for-v5.15-2021-09-11' of git://git./linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:

 - Add missing fields and remove some duplicate fields when printing a
   perf_event_attr.

 - Fix hybrid config terms list corruption.

 - Update kernel header copies, some resulted in new kernel features
   being automagically added to 'perf trace' syscall/tracepoint argument
   id->string translators.

 - Add a file generated during the documentation build to .gitignore.

 - Add an option to build without libbfd, as some distros, like Debian
   consider its ABI unstable.

 - Add support to print a textual representation of IBS raw sample data
   in 'perf report'.

 - Fix bpf 'perf test' sample mismatch reporting

 - Fix passing arguments to stackcollapse report in a 'perf script'
   python script.

 - Allow build-id with trailing zeros.

 - Look for ImageBase in PE file to compute .text offset.

* tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits)
  tools headers UAPI: Update tools's copy of drm.h headers
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Sync linux/fs.h with the kernel sources
  tools headers UAPI: Sync linux/in.h copy with the kernel sources
  perf tools: Add an option to build without libbfd
  perf tools: Allow build-id with trailing zeros
  perf tools: Fix hybrid config terms list corruption
  perf tools: Factor out copy_config_terms() and free_config_terms()
  perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields
  perf tools: Ignore Documentation dependency file
  perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions
  tools include UAPI: Update linux/mount.h copy
  perf beauty: Cover more flags in the  move_mount syscall argument beautifier
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools include UAPI: Sync sound/asound.h copy with the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
  perf report: Add support to print a textual representation of IBS raw sample data
  perf report: Add tools/arch/x86/include/asm/amd-ibs.h
  perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings
  ...

Merge tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux

Pull compiler attributes updates from Miguel Ojeda:

 - Fix __has_attribute(__no_sanitize_coverage__) for GCC 4 (Marco Elver)

 - Add Nick as Reviewer for compiler_attributes.h (Nick Desaulniers)

 - Move __compiletime_{error|warning} (Nick Desaulniers)

* tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux:
  compiler_attributes.h: move __compiletime_{error|warning}
  MAINTAINERS: add Nick as Reviewer for compiler_attributes.h
  Compiler Attributes: fix __has_attribute(__no_sanitize_coverage__) for GCC 4

Merge tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux

Pull auxdisplay updates from Miguel Ojeda:
 "An assortment of improvements for auxdisplay:

   - Replace symbolic permissions with octal permissions (Jinchao Wang)

   - ks0108: Switch to use module_parport_driver() (Andy Shevchenko)

   - charlcd: Drop unneeded initializers and switch to C99 style (Andy
     Shevchenko)

   - hd44780: Fix oops on module unloading (Lars Poeschel)

   - Add I2C gpio expander example (Ralf Schlatterbeck)"

* tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux:
  auxdisplay: Replace symbolic permissions with octal permissions
  auxdisplay: ks0108: Switch to use module_parport_driver()
  auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style
  auxdisplay: hd44780: Fix oops on module unloading
  auxdisplay: Add I2C gpio expander example

Merge tag 'smp-urgent-2021-09-12' of git://git./linux/kernel/git/tip/tip

Pull CPU hotplug updates from Thomas Gleixner:
 "Updates for the SMP and CPU hotplug:

   - Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the
     original hotplug code and now causing trouble with the ARM64 cache
     topology setup due to the pointless SMP function call.

     It's not longer required as the hotplug callbacks are guaranteed to
     be invoked on the upcoming CPU.

   - Remove the deprecated and now unused CPU hotplug functions

   - Rewrite the CPU hotplug API documentation"

* tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation: core-api/cpuhotplug: Rewrite the API section
  cpu/hotplug: Remove deprecated CPU-hotplug functions.
  thermal: Replace deprecated CPU-hotplug functions.
  drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()

Merge tag 'char-misc-5.15-rc1-lkdtm' of git://git./linux/kernel/git/gregkh/char-misc

Pull misc driver fix from Greg KH:
 "Here is a single patch for 5.15-rc1, for the lkdtm misc driver.

  It resolves a build issue that many people were hitting with your
  current tree, and Kees and others felt would be good to get merged
  before -rc1 comes out, to prevent them from having to constantly hit
  it as many development trees restart on -rc1, not older -rc releases.

  It has NOT been in linux-next, but has passed 0-day testing and looks
  'obviously correct' when reviewing it locally :)"

* tag 'char-misc-5.15-rc1-lkdtm' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  lkdtm: Use init_uts_ns.name instead of macros

Merge tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi

Pull IPMI updates from Corey Minyard:
 "A couple of very minor fixes for style and rate limiting.

  Nothing big, but probably needs to go in"

* tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi:
  char: ipmi: use DEVICE_ATTR helper macro
  ipmi: rate limit ipmi smi_event failure message

Merge tag 'sched_urgent_for_v5.15_rc1' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Borislav Petkov:

 - Make sure the idle timer expires in hardirq context, on PREEMPT_RT

 - Make sure the run-queue balance callback is invoked only on the
   outgoing CPU

* tag 'sched_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Prevent balance_push() on remote runqueues
  sched/idle: Make the idle timer expire in hard interrupt context

Merge tag 'locking_urgent_for_v5.15_rc1' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Borislav Petkov:

 - Fix the futex PI requeue machinery to not return to userspace in
   inconsistent state

 - Avoid a potential null pointer dereference in the ww_mutex deadlock
   check

 - Other smaller cleanups and optimizations

* tag 'locking_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rtmutex: Fix ww_mutex deadlock check
  futex: Remove unused variable 'vpid' in futex_proxy_trylock_atomic()
  futex: Avoid redundant task lookup
  futex: Clarify comment for requeue_pi_wake_futex()
  futex: Prevent inconsistent state and exit race
  futex: Return error code instead of assigning it without effect
  locking/rwsem: Add missing __init_rwsem() for PREEMPT_RT

Merge tag 'timers_urgent_for_v5.15_rc1' of git://git./linux/kernel/git/tip/tip

Pull timer fix from Borislav Petkov:

 - Handle negative second values properly when converting a timespec64
   to nanoseconds.

* tag 'timers_urgent_for_v5.15_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Handle negative seconds correctly in timespec64_to_ns()

Merge branch 'misc.namei' of git://git./linux/kernel/git/viro/vfs

Pull namei updates from Al Viro:
 "Clearing fallout from mkdirat in io_uring series. The fix in the
  kern_path_locked() patch plus associated cleanups"

* 'misc.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  putname(): IS_ERR_OR_NULL() is wrong here
  namei: Standardize callers of filename_create()
  namei: Standardize callers of filename_lookup()
  rename __filename_parentat() to filename_parentat()
  namei: Fix use after free in kern_path_locked

Merge tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6

Pull smbfs updates from Steve French:
 "cifs/smb3 updates:

   - DFS reconnect fix

   - begin creating common headers for server and client

   - rename the cifs_common directory to smbfs_common to be more
     consistent ie change use of the name cifs to smb (smb3 or smbfs is
     more accurate, as the very old cifs dialect has long been
     superseded by smb3 dialects).

  In the future we can rename the fs/cifs directory to fs/smbfs.

  This does not include the set of multichannel fixes nor the two
  deferred close fixes (they are still being reviewed and tested)"

* tag '5.15-rc-cifs-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: properly invalidate cached root handle when closing it
  cifs: move SMB FSCTL definitions to common code
  cifs: rename cifs_common to smbfs_common
  cifs: update FSCTL definitions

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio updates from Michael Tsirkin:

 - vduse driver ("vDPA Device in Userspace") supporting emulated virtio
   block devices

 - virtio-vsock support for end of record with SEQPACKET

 - vdpa: mac and mq support for ifcvf and mlx5

 - vdpa: management netlink for ifcvf

 - virtio-i2c, gpio dt bindings

 - misc fixes and cleanups

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (39 commits)
  Documentation: Add documentation for VDUSE
  vduse: Introduce VDUSE - vDPA Device in Userspace
  vduse: Implement an MMU-based software IOTLB
  vdpa: Support transferring virtual addressing during DMA mapping
  vdpa: factor out vhost_vdpa_pa_map() and vhost_vdpa_pa_unmap()
  vdpa: Add an opaque pointer for vdpa_config_ops.dma_map()
  vhost-iotlb: Add an opaque pointer for vhost IOTLB
  vhost-vdpa: Handle the failure of vdpa_reset()
  vdpa: Add reset callback in vdpa_config_ops
  vdpa: Fix some coding style issues
  file: Export receive_fd() to modules
  eventfd: Export eventfd_wake_count to modules
  iova: Export alloc_iova_fast() and free_iova_fast()
  virtio-blk: remove unneeded "likely" statements
  virtio-balloon: Use virtio_find_vqs() helper
  vdpa: Make use of PFN_PHYS/PFN_UP/PFN_DOWN helper macro
  vsock_test: update message bounds test for MSG_EOR
  af_vsock: rename variables in receive loop
  virtio/vsock: support MSG_EOR bit processing
  vhost/vsock: support MSG_EOR bit processing
  ...

Merge tag 'riscv-for-linus-5.15-mw1' of git://git./linux/kernel/git/riscv/linux

Pull more RISC-V updates from Palmer Dabbelt:

 - A pair of defconfig additions, for NVMe and the EFI filesystem
   localization options.

 - A larger address space for stack randomization.

 - A cleanup to our install rules.

 - A DTS update for the Microchip Icicle board, to fix the serial
   console.

 - Support for build-time table sorting, which allows us to have
   __ex_table read-only.

* tag 'riscv-for-linus-5.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Move EXCEPTION_TABLE to RO_DATA segment
  riscv: Enable BUILDTIME_TABLE_SORT
  riscv: dts: microchip: mpfs-icicle: Fix serial console
  riscv: move the (z)install rules to arch/riscv/Makefile
  riscv: Improve stack randomisation on RV64
  riscv: defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1
  riscv: defconfig: enable BLK_DEV_NVME

Merge branch 'for-5.15' of git://git./linux/kernel/git/jlawall/linux

Pull coccinelle updates from Julia Lawall:
 "These changes update some existing semantic patches with
  respect to some recent changes in the kernel.

  Specifically, the change to kvmalloc.cocci searches for
  kfree_sensitive rather than kzfree, and the change to
  use_after_iter.cocci adds list_entry_is_head as a valid
  use of a list iterator index variable after the end of
  the loop"

* 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
  scripts: coccinelle: allow list_entry_is_head() to use pos
  coccinelle: api: rename kzfree to kfree_sensitive

tools headers UAPI: Update tools's copy of drm.h headers

Picking the changes from:

  17ce9c61c71cbc0d ("drm: document DRM_IOCTL_MODE_RMFB")

Doesn't result in any tooling changes:

  $ tools/perf/trace/beauty/drm_ioctl.sh  > before
  $ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
  $ tools/perf/trace/beauty/drm_ioctl.sh  > after
  $ diff -u before after

Silencing these perf build warnings:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
  diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h

Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync drm/i915_drm.h with the kernel sources

To pick the changes in:

  b65a9489730a2494 ("drm/i915/userptr: Probe existence of backing struct pages upon creation")
  ee242ca704d38699 ("drm/i915/guc: Implement GuC priority management")
  81340cf3bddded4f ("drm/i915/uapi: reject set_domain for discrete")
  7961c5b60f23dff5 ("drm/i915: Add TTM offset argument to mmap.")
  aef7b67a79564f6c ("drm/i915/uapi: convert drm_i915_gem_userptr to kernel doc")
  e7737b67ab46ee0e ("drm/i915/uapi: reject caching ioctls for discrete")
  3aa8c57fe25a9247 ("drm/i915/uapi: convert drm_i915_gem_set_domain to kernel doc")
  289f5a72009b8f67 ("drm/i915/uapi: convert drm_i915_gem_caching to kernel doc")
  4a766ae40ec83301 ("drm/i915: Drop the CONTEXT_CLONE API (v2)")
  6ff6d61dd2a943bd ("drm/i915: Drop I915_CONTEXT_PARAM_NO_ZEROMAP")
  fe4751c3d513ff4f ("drm/i915: Drop I915_CONTEXT_PARAM_RINGSIZE")
  577729533cdc4e37 ("drm/i915: Document the Virtual Engine uAPI")
  c649432e86ca677d ("drm/i915: Fix busy ioctl commentary")

That doesn't result in any changes to tooling as no new ioctl were
added (at least not perceived by tools/perf/trace/beauty/drm_ioctl.sh).

Addressing this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
  diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync linux/fs.h with the kernel sources

To pick the change in:

  7957d93bf32bc211 ("block: add ioctl to read the disk sequence number")

It adds a new ioctl, but we are still not using that to generate tables
for 'perf trace', so no changes in tooling.

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
  diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools headers UAPI: Sync linux/in.h copy with the kernel sources

To pick the changes in:

  db243b796439c0ca ("net/ipv4/ipv6: Replace one-element arraya with flexible-array members")
  2d3e5caf96b9449a ("net/ipv4: Replace one-element array with flexible-array member")

That don't result in any change in tooling, the structs changed remains
with the same layout.

This addresses this build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
  diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h

Cc: David S. Miller <davem@davemloft.net>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add an option to build without libbfd

Some distributions, like debian, don't link perf with libbfd. Add a
build flag to make this configuration buildable and testable.

This was inspired by:

  https://lore.kernel.org/linux-perf-users/20210910102307.2055484-1-tonyg@leastfixedpoint.com/T/#u

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: tony garnock-jones <tonyg@leastfixedpoint.com>
Link: http://lore.kernel.org/lkml/20210910225756.729087-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Allow build-id with trailing zeros

Currently perf saves a build-id with size but old versions assumes the
size of 20.  In case the build-id is less than 20 (like for MD5), it'd
fill the rest with 0s.

I saw a problem when old version of perf record saved a binary in the
build-id cache and new version of perf reads the data.  The symbols
should be read from the build-id cache (as the path no longer has the
same binary) but it failed due to mismatch in the build-id.

  symsrc__init: build id mismatch for /home/namhyung/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf.

The build-id event in the data has 20 byte build-ids, but it saw a
different size (16) when it reads the build-id of the elf file in the
build-id cache.

  $ readelf -n ~/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf

  Displaying notes found in: .note.gnu.build-id
    Owner                Data size  Description
    GNU                  0x00000010 NT_GNU_BUILD_ID (unique build ID bitstring)
      Build ID: 53e4c2f42a4c61a2d632d92a72afa08f

Let's fix this by allowing trailing zeros if the size is different.

Fixes: 39be8d0115b321ed ("perf tools: Pass build_id object to dso__build_id_equal()")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210910224630.1084877-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>