Arnd Bergmann [Thu, 20 Dec 2018 15:37:38 +0000 (16:37 +0100)]
Merge tag 'am654-for-v4.21' of git://git./linux/kernel/git/kristo/linux into next/dt
AM65x DT changes for 4.21. Includes:
- Pinctrl support
- I2C support
- ECAP PWM support
- Power domain handling for UARTs
- McSPI support
* tag 'am654-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
arm64: dts: ti: k3-am654: Enable main domain McSPI0
arm64: dts: ti: k3-am654: Add McSPI DT nodes
arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes
arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM
arm64: dts: ti: k3-am65-main: Add ECAP PWM node
arm64: dts: ti: k3-am654-base-board: Add I2C nodes
arm64: dts: ti: am654-base-board: Add pinmux for main uart0
arm64: dts: ti: k3-am65: Add pinctrl regions
dt-bindings: pinctrl: k3: Introduce pinmux definitions
arm64: dts: ti: k3-am654: Fix wakeup_uart reg address
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 20 Dec 2018 15:34:06 +0000 (16:34 +0100)]
Merge tag 'omap-for-v4.21/dt-ti-sysc-signed' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt
Add interconnect target module dts data for omaps for v4.21
This big set of changes adds SoC specific l4 interconnect target module
device tree data for am335x, am437x, omap5 and dra7 SoCs. We also move
existing devices to the right location in the l4 interconnect hierarcy.
This is similar to what we've already done for omap4 l4 interconnects
earlier, and follows what is documented in the ti-sysc driver dts binding
in Documentation/devicetree/bindings/bus/ti-sysc.txt.
These changes will essentially replace the struct ti_sysc and clock
entries in the arch/arm/mach-omap2/omap_hwmod_*_data.c files. Then a few
merge windows later, we can start dropping the built-in platform data
from the omap_hwmod_*_data.c files in favor of the device tree data only.
For now, we verify the device tree data module data against the built-in
data and warn about changes to prevent regressions.
With the device tree data, we are also probing devices with the ti-sysc
interconnect target module instead of omap_device. This fixes up the
handling for multiple device instances in a single interconnect target
module that has caused trouble earlier. A custom wrapper driver has been
needed earlier for such cases.
And as the device tree data is organized by the l4 interconnect instances,
we will be able to use genpd later on. This is because each interconnect
instance is also often also a single power domain.
This series of changes has been brewing for several months now. I did not
want to send a pull request earlier as people were still seeing device
specific issues until recently though. However, it turned out that all the
issues were quite trivial to fix. I had missed adding device tree ranges
for the l3 data port used on some devices, and I had missed converting the
device addresses for a few devices. And some devices like needed fixes for
deferred probe handling such as the EHCI PHY for built-in case on omap5.
Anyways, in case of trouble, we can easily just revert changes for a
single device if needed.
* tag 'omap-for-v4.21/dt-ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Cosmetic fix for omap5 USB node names
ARM: dts: Fix wrong address for omap5 sata phy
ARM: dts: Add missing ranges for dra7 mcasp l3 ports
ARM: dts: Fix ranges for am335x epwmss
ARM: dts: Fix hsi gdd range for omap4
ARM: dts: Add am335x mcasp with l3 data port ranges
ARM: dts: Add missing ranges for am437x mcasp l3 ports
ARM: dts: dra7: Move the ti,no-idle quirk on proper gmac node
ARM: dts: Revert am335x mcasp ti-sysc changes
ARM: dts: omap5: Add l4 interconnect hierarchy and ti-sysc data
ARM: dts: Use dra7 mcasp compatible for mcasp instances
ARM: dts: dra7: Move l4 child devices to probe them with ti-sysc
ARM: dts: dra7: Add l4 interconnect hierarchy and ti-sysc data
ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc
ARM: dts: am335x: Add l4 interconnect hierarchy and ti-sysc data
ARM: dts: am437x: Move l4 child devices to probe them with ti-sysc
ARM: dts: am437x: Add l4 interconnect hierarchy and ti-sysc data
ARM: dts: dra7: convert to use new clkctrl layout
ARM: dts: am43xx: convert to use new clkctrl layout
ARM: dts: am33xx: convert to use new clkctrl layout
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 20 Dec 2018 15:32:23 +0000 (16:32 +0100)]
Merge tag 'zynq-dt-for-v5.0' of https://github.com/Xilinx/linux-xlnx into next/dt
arm: dts: zynq: DT changes for v5.0
- Fix mmc node name
* tag 'zynq-dt-for-v5.0' of https://github.com/Xilinx/linux-xlnx:
ARM: dts: Use mmc@ instead sdhci@
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 20 Dec 2018 15:30:59 +0000 (16:30 +0100)]
Merge tag 'zynqmp-dt-for-v5.0' of https://github.com/Xilinx/linux-xlnx into next/dt
arm64: dts: zynqmp: DT changes for v5.0
- Fix node names
- Fix wakeup-source
- Wire ddrc
- Label gpio controller (PS gpio)
* tag 'zynqmp-dt-for-v5.0' of https://github.com/Xilinx/linux-xlnx:
arm64: dts: zynqmp: Fix node names which contain "_"
arm64: dts: zynqmp: Add missing gpio-controller to ps gpio
arm64: dts: zynqmp: Add DDRC node
arm64: dts: zynqmp: replace gpio-key,wakeup with wakeup-source property
arm64: dts: zynqmp: Use mmc@ instead sdhci@
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Vignesh R [Sun, 9 Dec 2018 10:22:22 +0000 (15:52 +0530)]
arm64: dts: ti: k3-am654: Enable main domain McSPI0
Enable McSPI0 of main domain and add DT node for the SPI NOR flash
connected to CS0.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Vignesh R [Sun, 9 Dec 2018 10:22:21 +0000 (15:52 +0530)]
arm64: dts: ti: k3-am654: Add McSPI DT nodes
There are 3 instances of McSPI in MCU domain and 4 instances in Main domain.
Add DT nodes for all McSPI instances present on AM654 SoC.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Vignesh R [Wed, 12 Dec 2018 05:18:06 +0000 (10:48 +0530)]
arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes
Populate power-domain property for UART nodes, this is required for
Linux to enable UART clocks via PM calls. Without this UART instances
not initialized by bootloader (like main_uart1) fails to work in Linux.
Also, drop current-speed property from main_uart1 and main_uart2 nodes
as these UARTs are not initialized before Linux boots up and current
speed is unknown.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Vignesh R [Fri, 7 Dec 2018 09:35:35 +0000 (15:05 +0530)]
arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM
Enable ECAP PWM which is used for LCD backlight.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Vignesh R [Fri, 7 Dec 2018 09:35:34 +0000 (15:05 +0530)]
arm64: dts: ti: k3-am65-main: Add ECAP PWM node
Add DT entry for ECAP0 PWM node present in main domain
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Vignesh R [Tue, 13 Nov 2018 06:01:11 +0000 (11:31 +0530)]
arm64: dts: ti: k3-am654-base-board: Add I2C nodes
Add DT entries for I2C instances present in AM654 SoC.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Vignesh R [Tue, 13 Nov 2018 06:01:10 +0000 (11:31 +0530)]
arm64: dts: ti: am654-base-board: Add pinmux for main uart0
Add pinmux for main uart0 that is serves as console on AM654 EVM
Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tero Kristo [Tue, 13 Nov 2018 06:01:09 +0000 (11:31 +0530)]
arm64: dts: ti: k3-am65: Add pinctrl regions
Add pinctrl regions for the main and wkup mmr.
The range for main pinctrl region contains a gap
at offset 0x2e4, and because of this, the pinctrl
range is split into two sections.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Vignesh R [Tue, 13 Nov 2018 06:01:08 +0000 (11:31 +0530)]
dt-bindings: pinctrl: k3: Introduce pinmux definitions
The dt-bindings header for TI K3 AM6 SoCs define a set of macros for
defining pinmux configs in human readable form, instead of raw-coded
hex values.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tony Lindgren [Wed, 12 Dec 2018 23:57:27 +0000 (15:57 -0800)]
ARM: dts: Cosmetic fix for omap5 USB node names
These should be now using offset from the module base and not the
full physical address.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Olof Johansson [Thu, 13 Dec 2018 01:50:39 +0000 (17:50 -0800)]
Merge tag 'amlogic-dt64-2-redo' of https://git./linux/kernel/git/khilman/linux-amlogic into next/dt
arm64: dts: Amlogic updates for v4.21, round2
Highlights:
- fix IRQ trigger type
- AXG: enable GPIO IRQs, PHY IRQ, watchdog
* tag 'amlogic-dt64-2-redo' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson: Fix IRQ trigger type for macirq
arm64: dts: meson-axg: Enable GPIO interrupt controller
arm64: dts: meson-axg: s400: Enable PHY interrupt
arm64: dts: meson: add clock controller clock inputs
dt-bindings: clk: meson: add main controller clock input
dt-bindings: clk: meson: add ao controller clock inputs
arm64: dts: meson-axg: remove alternate xtal
arm64: dts: meson-axg: Enable watchdog on Meson AXG SoCs
Signed-off-by: Olof Johansson <olof@lixom.net>
Tony Lindgren [Wed, 12 Dec 2018 23:46:16 +0000 (15:46 -0800)]
ARM: dts: Fix wrong address for omap5 sata phy
Looks like I missed converting the omap5 sata phy addresses to use offset
from the module base instead of full physical address.
While at it, we can also more it to be a direct child of the interconnect
target module, it is not really a child of the ocp2scp control device.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Rob Herring [Wed, 12 Dec 2018 08:50:11 +0000 (09:50 +0100)]
dt-bindings: arm: Convert Rockchip board/soc bindings to json-schema
Convert Rockchip SoC bindings to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
[move to per-board entries after confirming with Rob
and added recently added boards]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 12 Dec 2018 22:01:03 +0000 (14:01 -0800)]
Merge tag 'gemini-dts' of git://git./linux/kernel/git/linusw/linux-nomadik into next/dt
Gemini DTS updates for v4.21:
- Fix the erroneous partition table on D-Link DIR-685
- Multiplex flash usage with other usage using pin control
handling (merged to the MTD tree)
- Use the RedBoot partition parser on SQ201
- Add the USB blocks (DT bindings merged in the last merge
window)
- Bump the debounce times a bit to avoid bouncing
* tag 'gemini-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Bump Gemini platforms to use 100ms debounce
ARM: dts: Add the FOTG210 USB host to Gemini boards
ARM: dts: Fix up SQ201 flash access
ARM: dts: Enable Gemini flash access
ARM: dts: Fix up the D-Link DIR-685 MTD partition info
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 12 Dec 2018 21:59:58 +0000 (13:59 -0800)]
Merge tag 'sunxi-h3-h5-for-4.21' of https://git./linux/kernel/git/sunxi/linux into next/dt
Allwinner H3/H5 changes for 4.21
Our usual pull request with the changes shared between the H3 and H5 SoCs.
The major changes for this release are:
- Addition of the video engine for the H5
- H3 Camera support
- New board: Emlid Neutis N5, Mapleboard MP130
* tag 'sunxi-h3-h5-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h5: Add Video Engine node
ARM/arm64: dts: allwinner: Move H3/H5 syscon label over to soc-specific nodes
arm64: dts: allwinner: h5: Add system-control node with SRAM C1
ARM: dts: sun8i: h3: Fix the system-control register range
ARM: dts: sun8i: Add the H3/H5 CSI controller
ARM: dts: sun8i-h3: Add dts for the Mapleboard MP130
arm64: dts: allwinner: new board - Emlid Neutis N5
dt-bindings: vendor-prefix: new vendor - Emlid
ARM: dts: sun8i-h3: add sy8106a to orange pi plus
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 12 Dec 2018 21:07:51 +0000 (13:07 -0800)]
Merge tag 'v4.21-rockchip-dts64-2' of git://git./linux/kernel/git/mmind/linux-rockchip into next/dt
Support for the onboard LEDs of the 2 96boards (ficus, rock960),
hdmi output for rockpro64, vpu node on rk3399 and adding the
always on 32kHz clock on rk3399-Gru to get a more complete clock
tree.
* tag 'v4.21-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add on-board LED support on rk3399-rock960
arm64: dts: rockchip: Add on-board LED support on rk3399-ficus
arm64: dts: rockchip: enable hdmi output on rk3399-rockpro64
arm64: dts: rockchip: add VPU device node for RK3399
arm64: dts: rockchip: Add 32k clk on rk3399-gru
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 12 Dec 2018 21:06:47 +0000 (13:06 -0800)]
Merge tag 'v4.21-rockchip-dts32-2' of git://git./linux/kernel/git/mmind/linux-rockchip into next/dt
RV1108 improvements (uart-dma, clocks, interrupt numbers, gmac support
timer and emmc pins) from its first real-world user.
RK3188 improvements (OPPv2, cpu node updates) to prepare for a new
devicetree, the BQ Edison 2 Quad-Core.
VPU device node for rk3288, right now only the jpeg encoder part
will be in the kernel but hopefully other codecs will follow.
* tag 'v4.21-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Add internal timer support for rv1108
ARM: dts: rockchip: add BQ Edison 2 QC devicetree
ARM: dts: rockchip: add VPU device node for RK3288
ARM: dts: rockchip: update cpu supplies on rk3188
ARM: dts: rockchip: add phandles to secondary cpu cores
ARM: dts: rockchip: add cpu-core resets for rk3188
ARM: dts: rockchip: convert rk3188 to opp-v2
ARM: dts: rockchip: add #sound-dai-cells to Cortex-A9 i2s
ARM: dts: rockchip: Add UART DMA support for rv1108
ARM: dts: rockchip: Assign the proper GPIO clocks for rv1108
ARM: dts: rockchip: Fix the PMU interrupt number for rv1108
ARM: dts: rockchip: Pass the 'arm,cpu-registers-not-fw-configured' property on rv1108
ARM: dts: rockchip: Pass the 'clock-latency' property on rv1108
ARM: dts: rockchip: Add rv1108 GMAC support
ARM: dts: rockchip: add rv1108 eMMC pin settings
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 12 Dec 2018 21:04:41 +0000 (13:04 -0800)]
Merge tag 'at91-4.21-dt' of git://git./linux/kernel/git/at91/linux into next/dt
AT91 DT for 4.21
- Switch most platforms to the new clock binding
- Small improvement for Axentia nattis
* tag 'at91-4.21-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: nattis: initialize the BLON pin as output-low early
ARM: dts: at91: at91sam9rl: switch to new clock bindings
ARM: dts: at91: at91sam9x5: switch to new clock bindings
ARM: dts: at91: at91sam9263: switch to new clock bindings
ARM: dts: at91: at91sam9261: switch to new clock bindings
ARM: dts: at91: at91sam9260: switch to new clock bindings
ARM: dts: at91: sama5d2: switch to new clock binding
ARM: dts: at91: sama5d4: switch to new clock bindings
ARM: dts: at91: sama5d2: use the divided clock for SMC
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 12 Dec 2018 21:02:51 +0000 (13:02 -0800)]
Merge tag 'amlogic-dt-2' of https://git./linux/kernel/git/khilman/linux-amlogic into next/dt
ARM: dts: Amlogic updates for v4.21, round 2
Highlights
- add CPU OPP tables
- timers: add global timer and TWD
* tag 'amlogic-dt-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson: meson8b: add the CPU OPP tables
ARM: dts: meson: meson8: add the CPU OPP table
ARM: dts: meson8b: add the Cortex-A5 global timer
ARM: dts: meson8b: add the ARM TWD timer
ARM: dts: meson8: add the Cortex-A9 global timer
ARM: dts: meson8: add the ARM TWD timer
ARM: dts: meson: group the Cortex-A5 / Cortex-A9 peripherals
dt-bindings: clock: meson8b: export the CPU post dividers
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 12 Dec 2018 21:01:24 +0000 (13:01 -0800)]
Merge tag 'uniphier-dt-v4.21' of git://git./linux/kernel/git/masahiroy/linux-uniphier into next/dt
UniPhier ARM SoC DT updates for v4.21
- Add bindings for all SoCs/boards of UniPhier platform
- Move binding docs to socionext directory
- Add all CPUs in cooling maps
- Add MIO DMAC nodes
* tag 'uniphier-dt-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
ARM: dts: uniphier: add MIO DMAC nodes
arm64: dts: uniphier: Add all CPUs in cooling maps
ARM: dts: uniphier: Add all CPUs in cooling maps
dt-bindings: uniphier: move cache-uniphier.txt to vendor directory
dt-bindings: uniphier: add bindings for UniPhier SoC family
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 12 Dec 2018 20:59:14 +0000 (12:59 -0800)]
Merge tag 'imx-dt64-4.21' of git://git./linux/kernel/git/shawnguo/linux into next/dt
Freescale arm64 device tree update for 4.21:
- Add device tree for LS1028A SoC and NXP FRWY & QDS boards support
based on this SoC.
- Add device tree for LX2160A SoC and NXP QDS & RDB boards support
based on this SoC.
- Add qdma devices for LS1043A and LS1046A SoC.
- Disable PCIe device by default in SoC device tree and let board level
device tree to enable as needed.
- Drop compatible string "snps,dw-pcie" from LayerScape PCIe devices to
avoid incorrect matching.
- Move fsl-mc device as a child node of soc node, and add missing
dma-ranges property for LS1088A SoC.
- Update LayerScape SoCs' cooling maps to include all devices affected
by individual trip points.
* tag 'imx-dt64-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: ls1046a: add qdma device tree nodes
arm64: dts: ls1043a: add qdma device tree nodes
arm64: dts: ls1088a: Add missing dma-ranges property
arm64: dts: ls1088a: Move fsl-mc node
arm64: dts: fsl: Add all CPUs in cooling maps
arm64: dts: Add support for NXP LS1028A SoC
arm64: dts: layerscape: removed compatible string "snps,dw-pcie"
arm64: dts: fsl: Add the status property disable PCIe
arm64: dts: ls1012a: Add FRWY-LS1012A board support
arm64: dts: add LX2160AQDS board support
arm64: dts: add LX2160ARDB board support
arm64: dts: add QorIQ LX2160A SoC support
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 12 Dec 2018 20:56:36 +0000 (12:56 -0800)]
Merge tag 'imx7ulp-dt-4.21' of git://git./linux/kernel/git/shawnguo/linux into next/dt
i.MX7ULP device tree for 4.21:
- It includes the initial device tree for i.MX7ULP SoC and EVK board
support.
* tag 'imx7ulp-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx: add imx7ulp evk support
ARM: dts: imx: add common imx7ulp dtsi support
dt-bindings: fsl: add imx7ulp pm related components bindings
dt-bindings: fsl: add compatible for imx7ulp evk
clk: imx: add imx7ulp clk driver
clk: imx: implement new clk_hw based APIs
clk: imx: make mux parent strings const
dt-bindings: clock: add imx7ulp clock binding doc
clk: imx: add imx7ulp composite clk support
clk: imx: add pfdv2 support
clk: imx: add pllv4 support
clk: fractional-divider: add CLK_FRAC_DIVIDER_ZERO_BASED flag support
clk: imx: add gatable clock divider support
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 12 Dec 2018 20:55:34 +0000 (12:55 -0800)]
Merge tag 'imx7d-pico-4.21' of git://git./linux/kernel/git/shawnguo/linux into next/dt
i.MX7D PICO boards update for 4.21:
- It contains a series from Otavio Salvador that improves i.MX7D PICO
SoM, and then adds Hobbit baseboard support on top of the improvement.
* tag 'imx7d-pico-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx7d-pico: Add the imx7d-pico-hobbit variant
ARM: dts: imx7d-pico-pi: Extend peripherals support
ARM: dts: imx7d-pico: Extend peripherals support
ARM: dts: imx7d-pico: Improve WiFi regulator name
ARM: dts: imx7d-pico: Pass the Ethernet PHY reset GPIO
ARM: dts: imx7d-pico: Pass the USBOTG1_PWR pinctrl
ARM: dts: imx7d-pico-pi: Move SoM related part to imx7d-pico.dtsi
ARM: dts: imx7d-pico: Switch to SPDX identifier
ARM: dts: imx7d-pico: Do not harcode the memory size
ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
ARM: imx: update the cpu power up timing setting on i.mx6sx
ARM: dts: imx7d-pico: Describe the Wifi clock
ARM: dts: imx51-zii-rdu1: Remove EEPROM node
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 12 Dec 2018 20:54:48 +0000 (12:54 -0800)]
Merge tag 'imx-dt-4.21' of git://git./linux/kernel/git/shawnguo/linux into next/dt
i.MX device tree update for 4.21:
- New boards support: emtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva
and vf610 based Liebherr's BK4 device, ZII SCU4 AIB board.
- Add flexcan support for i.MX6UL SoC, turn on stop mode wakeup feature
for flexcan, and enable devices on a few i.MX6 NXP boards.
- Enable AUO G101EVN010 lcd panel and Goodix touch support for
imx6ul-ccimx6ulsbcpro board.
- Enable sensors support for imx6qdl-sabresd board: egalax touch, light,
magnetometer and accelerometer sensor.
- Switch more boards to use SPDX identifier.
- Fix memory node duplication in i.MX device tree sources.
- Correct GIC PPI interrupts mask for i.MX6UL and i.MX7 SoCs.
- Drop 'snps,dw-pcie' compatible from LS1021A PCIe device to avoid
incorrect device matching.
- Add the gpu nodes for the adreno 200 GPU on iMX51 and iMX53, which
are now supported by the freedreno driver.
- Add DCP device support for i.MX6ULL, which requires explicit clock
enabling.
- Add '#thermal-sensor-cells' for thermal device and '#cooling-cells'
for cooling devices.
- Add missing clock information for EPIT on i.MX25 SoC.
- Add PWM and qdma devices for LS1021A SoC.
- Update cooling maps of LS1021A SoC to include all devices affected by
individual trip points.
- Random device addition and cleanup on various boards.
* tag 'imx-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (82 commits)
ARM: dts: imx51-zii-rdu1: Do not specify "power-gpio" for hpa1
ARM: dts: imx6ul: Remove extra space between node name and brace
ARM: dts: imx6qdl-sabresd: Use GPIO_ACTIVE_HIGH for regulators
ARM: dts: imx6ul: add flexcan support
ARM: dts: imx5: add gpu nodes
ARM: dts: imx6qdl-sabresd: add accelerometer sensor support
ARM: dts: imx6qdl-sabresd: add magnetometer sensor support
ARM: dts: imx6qdl-sabresd: add light sensor support
ARM: dts: imx6qdl-sabresd: Move regulators outside of "simple-bus"
ARM: dts: imx6qdl: Fix memory node duplication
ARM: dts: imx6dl-mamoj: Add a memory node
ARM: dts: imx53-voipac-dmm-668: Fix memory node duplication
ARM: dts: vf610-zii-scu4-aib: Add HI8435 support
ARM: dts: imx6qdl-sabresd: add egalax touch screen support on i2c2 bus
ARM: dts: imx7s: Add flexcan stop mode wakeup support
ARM: dts: imx6ul: Add flexcan stop mode wakeup support
ARM: dts: imx6qdl: Add flexcan stop mode wakeup support
ARM: dts: imx6sx: Add flexcan stop mode wakeup support
ARM: dts: imx6ul-pico: Add the imx6ul-pico-pi variant
ARM: dts: imx6ul-pico-hobbit: Extend peripherals support
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 12 Dec 2018 20:53:47 +0000 (12:53 -0800)]
Merge tag 'v4.20-next-dts64' of https://git./linux/kernel/git/matthias.bgg/linux into next/dt
mt8173: add node for the command queue device
* tag 'v4.20-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: dts: mt8173: Add GCE node
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 12 Dec 2018 20:53:05 +0000 (12:53 -0800)]
Merge tag 'samsung-dt64-4.21' of https://git./linux/kernel/git/krzk/linux into next/dt
Samsung DTS ARM64 changes for v4.21
1. Update DWC3 hardware modules to Exynos5433 specific variant.
2. Update cooling maps to include all CPU devices in multiple DTS files.
* tag 'samsung-dt64-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Add all CPUs in cooling maps
arm64: dts: exynos: Update DWC3 modules on Exynos5433 SoCs
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 12 Dec 2018 20:52:20 +0000 (12:52 -0800)]
Merge tag 'samsung-dt-4.21' of https://git./linux/kernel/git/krzk/linux into next/dt
Samsung DTS ARM changes for v4.21
1. Add missing properties and nodes for PMIC clocks in multiple DTS
files.
2. Add UHS-I bus speed support to Odroid XU3/XU4/HC SD card and bump the
maximum clock frequency to 200 MHz for SD and eMMC.
3. Update cooling maps to include all CPU devices in multiple DTS files.
4. Enable quirks for Exynos3250 DWC.
5. Add JPEG CODEC node to S5Pv210.
6. Add opp-suspend to devfreq OPPs on Exynos4 boards to fix resuming
from suspend to RAM.
7. Remove eDP from Arndale board as it does not work and breaks also
DSI.
* tag 'samsung-dt-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: remove display-port node from Arndale
ARM: dts: exynos: Add opp-suspend to DMC and leftbus devfreq OPPs on Exynos4
ARM: dts: s5pv210: Add s5p-jpeg codec node.
ARM: dts: exynos: Use Samsung SoC specific compatible for DWC2 module
ARM: dts: exynos: Add all CPUs in cooling maps
ARM: dts: exynos: Clarify comment explaining purpose of Odroid XU3 DTSI
ARM: dts: exynos: Add pin configuration for SD write protect on Odroid XU3/XU4/HC1
ARM: dts: exynos: Update maximum frequency for eMMC to 200MHz on Odroid XU3/XU4
ARM: dts: exynos: Update maximum frequency for SD card to 200MHz on Odroid XU3/XU4/HC1
ARM: dts: exynos: Fix LDO13 min values on Odroid XU3/XU4/HC1
ARM: dts: exynos: Add UHS-I bus speed support to Odroid XU3/XU4/HC1
ARM: dts: exynos: Add missing clocks to RTC node for Arndale board
ARM: dts: exynos: Add compatible for s5m8767 clocks node on Itop Core
ARM: dts: exynos: Add compatible for s2mps11 clocks node on Exynos542x
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 12 Dec 2018 20:51:46 +0000 (12:51 -0800)]
Merge tag 'mvebu-dt64-4.21-1' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt64 for 4.21 (part 1)
- complete the description of the clearfog-gt-8k board (Armada 8040
based board)
- declare eMMC on espressobin (Armada 3720 based board) which still
need to be enable by the bootloader as it is not present on all the
board.
- add a new version of the Macchiatobin (Armada 8040 based board): the
Single Shot (without the 10G 3310 PHYs).
* tag 'mvebu-dt64-4.21-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: clearfog-gt-8k: describe mini-PCIe CON2 USB
arm64: dts: add support for Macchiatobin Single Shot board
arm64: dts: marvell: armada-37xx: Enable emmc on espressobin
arm64: dts: marvell: armada37xx: Add emmc/sdio pinctrl definition
arm64: dts: clearfog-gt-8k: enable mini-PCIe CON2 USB
arm64: dts: clearfog-gt-8k: 1G eth PHY reset signal
arm64: dts: clearfog-gt-8k: fix USB regulator gpio polarity
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 12 Dec 2018 20:50:46 +0000 (12:50 -0800)]
Merge tag 'qcom-arm64-for-4.21-2' of git://git./linux/kernel/git/agross/linux into next/dt
Qualcomm ARM64 Updates for v4.21 Part 2
* Switch to use dwc3-qcom glue driver on MSM8996
* Fix issue with xo clk name on MSM8998
* Add cooling maps on MSM8916
* Add UART nodes on SDM845
* Add camera subsystem support on MSM8996 and MSM8916
* tag 'qcom-arm64-for-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
arm64: dts: msm8996: Use dwc3-qcom glue driver for USB
arm64: dts: qcom: msm8998: Fixup clock to use xo_board
arm64: dts: qcom: sdm845: Add UART nodes
arm64: dts: qcom: msm8996: Add CAMSS support
arm64: dts: qcom: msm8996: Add VFE SMMU node
arm64: dts: qcom: Add pinctrls for camera sensors
arm64: dts: qcom: Add Camera Control Interface pinctrls
arm64: dts: qcom: msm8916: Add CAMSS support
arm64: dts: qcom: msm8916: Add IOMMU sub-node for VFE context bank
arm64: dts: msm8916: Add all CPUs in cooling maps
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 12 Dec 2018 20:50:00 +0000 (12:50 -0800)]
Merge tag 'sunxi-dt64-for-4.21' of https://git./linux/kernel/git/sunxi/linux into next/dt
Allwinner arm64 DT changes for 4.21
Our usual set of arm64 DT changes, with the biggest additions being:
- Support for the video decoding engine in the A64
- Support for the audio codec in the A64
- USB Support in the H6
- HDMI Support in the H6
- EMAC Support in the H6
- New board: Orange Pi Lite2
* tag 'sunxi-dt64-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (27 commits)
arm64: dts: allwinner: a64: Fix up RTC device node and clock references
arm64: dts: allwinner: a64: Add Video Engine node
arm64: dts: allwinner: a64: Add support for the SRAM C1 section
arm64: dts: allwinner: a64: pinebook: enable power supplies
arm64: dts: allwinner: a64: sopine-baseboard: enable power supplies
arm64: dts: allwinner: axp803: add AC and battery power supplies
arm64: dts: allwinner: a64: bananapi-m64: Enable audio codec
arm64: dts: allwinner: a64: enable sound on Pinebook
arm64: dts: allwinner: a64: enable sound on Pine64 and SoPine
arm64: dts: allwinner: a64: add nodes necessary for analog sound support
arm64: dts: allwinner: h6: orangepi: Add device nodes for LEDs
arm64: dts: allwinner: h6: orangepi: Enable USB 2.0 host and OTG ports
arm64: dts: allwinner: h6: orangepi: Add board-wide 5V regulator
arm64: dts: allwinner: h6: fix EMAC compatible string sequence
arm64: dts: allwinner: a64: Add device node for Mali-400 GPU
dt-bindings: gpu: mali-utgard: Add compatible for A64 Mali
arm64: dts: allwinner: h6: enable USB2 on Pine H64
arm64: dts: allwinner: h6: add USB Vbus regulator for Pine H64
arm64: dts: allwinner: h6: add USB2-related device nodes
arm64: dts: allwinner: h6: Enable HDMI output on Pine H64 board
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 12 Dec 2018 20:48:57 +0000 (12:48 -0800)]
Merge tag 'sunxi-dt-for-4.21' of https://git./linux/kernel/git/sunxi/linux into next/dt
Allwinner DT changes for 4.21
This is a quite big pull request this time, with a huge number of changes
(and patches) due to us fixing the vast majority of the DTC warnings our DT
had.
We also have a bunch of other good, more meaningful, changes:
- Support for the new Allwinner T3 (rebranded R40) and f1c100s (armv5)
SoCs
- AXP803 PMIC AC Power supply support
- Rework of the oscillators tree
- Two new boards: the t3-cqa3t-bv3 and Lichee Pi Nano
Plus a few enhancements here and there.
* tag 'sunxi-dt-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (84 commits)
ARM: dts: sunxi: Fix PMU compatible strings
ARM: dts: sun8i: r40: Add RTC device node
ARM: dts: sunxi: h3/h5: Fix up RTC device node and clock references
ARM: dts: sun8i: a23/a33: Fix up RTC device node
ARM: dts: sun8i: r40: Add clock accuracy for external oscillators
ARM: dts: sunxi: h3/h5: Add clock accuracy for external oscillators
ARM: dts: sun8i: a33: Drop audio codec oversampling rate to 128 fs
ARM: dts: sun8i: h3: Remove unnecessary reserved memory node
ARM: dts: sun8i: a33: Remove unnecessary reserved memory node
ARM: dts: suniv: Add device tree for Lichee Pi Nano
ARM: dts: suniv: add initial DTSI file for F1C100s
ARM: dts: axp81x: add AC power supply subnode
ARM: dts: sun8i: v3s: Remove skeleton and memory to avoid warnings
ARM: dts: sun8i: v3s: Provide default muxing for relevant controllers
ARM: dts: sun8i: v3s: Change pinctrl nodes to avoid warning
ARM: dts: sun8i: v3s: Change LRADC node names to avoid warnings
ARM: dts: sun8i: h3: Remove leading zeros from unit-addresses
ARM: dts: sun8i: BPI-M2M: Remove i2c nodes
ARM: dts: sun8i: a23/a33: Provide default muxing for relevant controllers
ARM: dts: sunxi: reference: Move the muxing back to the common DTSI
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Otavio Salvador [Mon, 26 Nov 2018 17:35:06 +0000 (15:35 -0200)]
ARM: dts: rockchip: Add internal timer support for rv1108
Add support for the internal timer peripheral on RV1108.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Manivannan Sadhasivam [Mon, 29 Oct 2018 09:42:40 +0000 (15:12 +0530)]
arm64: dts: rockchip: Add on-board LED support on rk3399-rock960
Add on-board LED support for Rock960 board based on the following
standard used by rest of the 96Boards:
green:user1 default-trigger: heartbeat
green:user2 default-trigger: mmc0/disk-activity(onboard-storage)
green:user3 default-trigger: mmc1 (SD-card)
green:user4 default-trigger: none, panic-indicator
yellow:wlan default-trigger: phy0tx
blue:bt default-trigger: hci0-power
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Manivannan Sadhasivam [Mon, 29 Oct 2018 09:42:39 +0000 (15:12 +0530)]
arm64: dts: rockchip: Add on-board LED support on rk3399-ficus
Add on-board LED support for Ficus board based on the following
standard used by other 96Boards:
red:user1 default-trigger: heartbeat
red:user2 default-trigger: mmc0/disk-activity (onboard-storage)
red:user3 default-trigger: mmc1 (SD-card)
red:user4 default-trigger: none, panic-indicator
red:wlan default-trigger: phy0tx
red:bt default-trigger: hci0-power
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Olof Johansson [Tue, 11 Dec 2018 16:10:09 +0000 (08:10 -0800)]
Merge tag 'tegra-for-4.21-arm64-dt' of git://git./linux/kernel/git/tegra/linux into next/dt
arm64: tegra: Device tree change for v4.21-rc1
These changes add a bunch of features for Tegra194 and Tegra186, such as
wake events, on-die RTC, temperature sensors, HDA for audio over HDMI
and fan support on Jetson Xavier to allow cooling of the device.
* tag 'tegra-for-4.21-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (29 commits)
arm64: tegra: Set reg property for display-hub on Tegra194
arm64: tegra: Set reg property for display-hub on Tegra186
arm64: dts: tegra186: Enable IOMMU for SDHCI
arm64: tegra: Enable HDA controller on Jetson TX1
arm64: tegra: Add CEC controller on Tegra194
arm64: tegra: Enable HDA on Jetson Xavier
arm64: tegra: Add HDA controller on Tegra194
arm64: tegra: Add CEC controller on Tegra186
arm64: tegra: Enable HDA on Jetson TX2
arm64: tegra: Add HDA controller on Tegra186
arm64: tegra: Add temperature sensor on P2888
arm64: tegra: Add gpio-keys on Jetson Xavier
arm64: tegra: Add AON GPIO controller on Tegra194
arm64: tegra: p2888: Enable on-die RTC
arm64: tegra: Add RTC support on Tegra194
arm64: tegra: Enable PMC wake events on Tegra194
arm64: tegra: p3310: Enable on-die RTC
arm64: tegra: Add RTC support on Tegra186
arm64: tegra: Enable PMC wake events on Tegra186
arm64: tegra: Fix power key interrupt type on Jetson TX2
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Dec 2018 16:06:35 +0000 (08:06 -0800)]
Merge tag 'tegra-for-4.21-arm-dt' of git://git./linux/kernel/git/tegra/linux into next/dt
ARM: tegra: Device tree changes for v4.21-rc1
These changes add the external memory controller on Tegra20 as well as
the VIC on Tegra124.
* tag 'tegra-for-4.21-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Add VIC on Tegra124
ARM: dts: tegra20: Add clock entry to External Memory Controller
ARM: dts: tegra20: Add interrupt entry to External Memory Controller
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Dec 2018 16:05:17 +0000 (08:05 -0800)]
Merge tag 'tegra-for-4.21-dt-bindings' of git://git./linux/kernel/git/tegra/linux into next/dt
dt-bindings: Changes for v4.21-rc1
This contains a few cleanups of and additions to existing device tree
bindings, such as XUSB, EMC, PMC and thermal.
* tag 'tegra-for-4.21-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: tegra186-pmc: Add interrupt controller properties
dt-bindings: thermal: tegra-bpmp: Add Tegra194 support
dt: bindings: Move tegra20-emc binding to memory-controllers directory
dt: bindings: tegra20-emc: Document clock property
dt: bindings: tegra20-emc: Document interrupt property
dt-bindings: usb: xhci-tegra: Add power-domain details
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Dec 2018 16:05:01 +0000 (08:05 -0800)]
Merge tag 'renesas-dt-bindings-for-v4.21' of https://git./linux/kernel/git/horms/renesas into next/dt
Renesas ARM Based SoC DT Bindings Updates for v4.21
* Move 'renesas,prr' binding to its own document
- Prepration for converting board-level bindings to json-schema
* Document iW-RainboW-G20D-Qseven-RZG1N board and iWave RZ/G1N SOM
* tag 'renesas-dt-bindings-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
dt-bindings: arm: renesas: Move 'renesas,prr' binding to its own doc
dt-bindings: arm: renesas: Document iW-RainboW-G20D-Qseven-RZG1N board
dt-bindings: arm: renesas: Document iWave RZ/G1N SOM
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Dec 2018 16:03:48 +0000 (08:03 -0800)]
Merge tag 'renesas-arm-dt2-for-v4.21' of https://git./linux/kernel/git/horms/renesas into next/dt
Second Round of Renesas ARM Based SoC DT Updates for v4.21
* RZ/G1N (r8a7744) SoC
- Describe in DT: SYS-DMAC, GPIO, Ethernet AVB, SMP, [H]SCIF{A|B},
I2C, USB 2.0 and 3.0 hosts, USB-DMAC, HSUSB, RWDT, Audio, CAN, IRQC,
thermal, CMT, VIN, VSP, IPMMU, PMU, TPU, QSPI MSIOF, and PCIE
- iWave G20D-Q7 board
- Initial support
- Enable eMMC, SDHI and SPIO NOR support
- Add camera daughterboard
* RZ/G1M (r8a7743) SoC
- Remove legacy "renesas,rcar-thermal" compatibility
* tag 'renesas-arm-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (34 commits)
ARM: dts: r8a7744-iwg20m: Add SPI NOR support
ARM: dts: iwg20d-q7-common: Move cmt/rwdt node out of RZ/G1M SOM
ARM: dts: r8a7744: Add PCIe Controller device node
ARM: dts: r8a7744: Add xhci support
ARM: dts: r8a7744: Add MSIOF[012] support
ARM: dts: r8a7744: Add QSPI support
ARM: dts: r8a7744-iwg20d-q7-dbcm-ca: Add device tree for camera DB
ARM: dts: r8a7744: Add TPU support
ARM: dts: r8a7744: Add PWM SoC support
ARM: dts: r8a7744: Add IPMMU DT nodes
ARM: dts: r8a7744: Add VSP support
ARM: dts: r8a7744: add VIN dt support
ARM: dts: r8a7744: Add CMT SoC specific support
ARM: dts: r8a7744: Add thermal device to DT
ARM: dts: r8a7744: Add IRQC support
ARM: dts: r8a7744: Add CAN support
ARM: dts: r8a7744: Add audio support
ARM: dts: r8a7744: Add RWDT node
ARM: dts: r8a7744: Add USB-DMAC and HSUSB device nodes
ARM: dts: r8a7744: USB 2.0 host support
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Dec 2018 16:01:55 +0000 (08:01 -0800)]
Merge tag 'renesas-arm64-dt2-for-v4.21' of https://git./linux/kernel/git/horms/renesas into next/dt
Second Round of Renesas ARM64 Based SoC DT Updates for v4.21
* R-Car D3 (r8a77995) SoC based Draak board
- Add the backlight device for the LVDS1 output
* R-Car H3 (r8a7795) ES1.0 SoC
- Add missing power domains to IPMMU nodes
* R-Car M3-N (r8a77965) SoC
- Remove non-existent IPMMU-IR
* tag 'renesas-arm64-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: r8a77995: draak: Add backlight
arm64: dts: renesas: r8a7795-es1: Add missing power domains to IPMMU nodes
arm64: dts: renesas: r8a77965: Remove non-existent IPMMU-IR
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Dec 2018 15:59:16 +0000 (07:59 -0800)]
Merge tag 'aspeed-4.21-devicetree' of git://git./linux/kernel/git/joel/aspeed into next/dt
ASPEED device tree updates for 4.20
- New machine: Facebook Backpack-CMM BMC and flash layout
- OpenPower reference systems (Palmetto P8, Romulus P9) move to the
ColdFire based FSI driver
- Misc device tree updates from the OpenBMC project
* tag 'aspeed-4.21-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: aspeed: Add Facebook Backpack-CMM BMC
ARM: dts: Add Facebook BMC flash layout
ARM: dts: aspeed: wspoon: Enable iio-hwmon battery
ARM: dts: aspeed: romulus: Enable iio-hwmon-battery
ARM: dts: aspeed: Enable VHUB on Romulus
ARM: dts: aspeed-palmetto: Add LPC control node
ARM: dts: aspeed: Palmetto system can use coprocessor for FSI
ARM: dts: aspeed: Romulus system can use coprocessor for FSI
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 11 Dec 2018 15:43:46 +0000 (07:43 -0800)]
Merge tag 'pxa-dt-4.21' of https://github.com/rjarzmik/linux into next/dt
This device-tree pxa update brings :
- various fixes from Daniel (W=12 issues mainly)
- support for the first pxa3xx devicetree pxa board
* tag 'pxa-dt-4.21' of https://github.com/rjarzmik/linux:
ARM: dts: pxa3xx: Add Raumfeld DTS files
ARM: dts: pxa: clean up USB controller nodes
ARM: dts: pxa3xx: clean up pxa3xx clock controller node name
ARM: dts: pxa3xx: order timer and gcu nodes under /pxabus
ARM: dts: pxa2xx: fix hwuart memory range
ARM: dts: pxa3xx: drop #address-cells and #size-cells from pinctrl node
ARM: dts: pxa2xx: drop #address-cells and #size-cells from /cpus
ARM: dts: pxa3xx: add gcu node
Signed-off-by: Olof Johansson <olof@lixom.net>
Tony Lindgren [Sat, 8 Dec 2018 00:52:46 +0000 (16:52 -0800)]
ARM: dts: Add missing ranges for dra7 mcasp l3 ports
We need to add mcasp l3 port ranges for mcasp to use a correct l3
data port address for dma. And we're also missing the optional clocks
that we have tagged with HWMOD_OPT_CLKS_NEEDED in omap_hwmod_7xx_data.c.
Note that for reading the module revision register HWMOD_OPT_CLKS_NEEDED
do not seem to be needed. So they could be probably directly managed
only by the mcasp driver, and then we could leave them out for the
interconnect target module.
Fixes:
4ed0dfe3cf39 ("ARM: dts: dra7: Move l4 child devices to probe
them with ti-sysc")
Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 10 Dec 2018 21:43:11 +0000 (13:43 -0800)]
ARM: dts: Fix ranges for am335x epwmss
Looks like I missed the ranges for am335x epwmss. Let's set it up the
same way as for am437x and dra7.
Fixes:
87fc89ced3a7 ("ARM: dts: am335x: Move l4 child devices to probe
them with ti-sysc")
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Masahiro Yamada [Wed, 28 Nov 2018 02:42:30 +0000 (11:42 +0900)]
ARM: dts: uniphier: add MIO DMAC nodes
Add MIO-DMAC (Media IO DMA Controller) nodes, and use them as
the DMA engine of SD/eMMC controllers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Viresh Kumar [Fri, 16 Nov 2018 10:04:33 +0000 (15:34 +0530)]
arm64: dts: uniphier: Add all CPUs in cooling maps
Each CPU can (and does) participate in cooling down the system but the
DT only captures a handful of them, normally CPU0, in the cooling maps.
Things work by chance currently as under normal circumstances its the
first CPU of each cluster which is used by the operating systems to
probe the cooling devices. But as soon as this CPU ordering changes and
any other CPU is used to bring up the cooling device, we will start
seeing failures.
Also the DT is rather incomplete when we list only one CPU in the
cooling maps, as the hardware doesn't have any such limitations.
Update cooling maps to include all devices affected by individual trip
points.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tony Lindgren [Wed, 5 Dec 2018 22:48:51 +0000 (14:48 -0800)]
ARM: dts: Fix hsi gdd range for omap4
While reviewing the missing mcasp ranges I noticed omap4 hsi range
for gdd is wrong so let's fix it.
I'm not aware of any omap4 devices in mainline kernel though that use
hsi though.
Fixes:
84badc5ec5fc ("ARM: dts: omap4: Move l4 child devices to probe
them with ti-sysc")
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
A.s. Dong [Sat, 10 Nov 2018 15:13:12 +0000 (15:13 +0000)]
ARM: dts: imx: add imx7ulp evk support
The NXP i.MX 7ULP Evaluation Kit (EVK) provides a platform for rapid
evaluation of the i.MX 7ULP, which features NXP's advanced implementation
of the Arm Cortex-A7 core, the Arm Cortex-M4 core, as well as a 3D and
2D Graphics Processing Units (GPUs).
The EVK enables HDMI output for simple out-of-the-box to bring up but
allows reconfiguration for MIPI displays. The EVK is designed as a
System-On-Module(SOM) board that connects to an associated baseboard.
The SOM provides 1 GB LPDDR3, 8 MB Quad SPI flash, Micro SD 3.0 card
socket, WiFi/ Bluetooth capability, USB 2.0 OTG with Type C connector
and an NXP PF1550 power management IC (PMIC). The baseboard provides
additional capabilities including a full SD/MMC 3.0 card socket, audio
codec, multiple sensors, an HDMI connector, and an alternate MIPI display
connector. Additionally, the EVK facilitates software development with the
ultimate goal of faster time to market through the support of both
Linux OS and AndroidTM rich operating systems, as well as FreeRTOS.
This patch aims to support the preliminary booting up features
as follows:
GPIO
LPUART
FEC
SD/MMC
See more board details:
https://www.nxp.com/products/processors-and-microcontrollers/
arm-based-processors-and-mcus/i.mx-applications-processors/
i.mx-7-processors/evaluation-kit-for-the-i.mx-7ulp-applications
-processor:MCIMX7ULP-EVK
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
A.s. Dong [Sat, 10 Nov 2018 15:13:08 +0000 (15:13 +0000)]
ARM: dts: imx: add common imx7ulp dtsi support
The i.MX 7ULP family of processors features NXP's advanced implementation
of the Arm Cortex-A7 core, the Arm Cortex-M4 core, as well as a 3D and 2D
Graphics Processing Units (GPUs).
This patch aims to add the initial support including:
1) CLK
2) GPIO PTC, PTD, PTE, PTF
3) uSDHC 1/2
4) LPUART 4/5/6/7
5) LPI2C 6/7
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
A.s. Dong [Sat, 10 Nov 2018 15:13:00 +0000 (15:13 +0000)]
dt-bindings: fsl: add imx7ulp pm related components bindings
Add imx7ulp pm related components bindings.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
A.s. Dong [Sat, 10 Nov 2018 15:12:56 +0000 (15:12 +0000)]
dt-bindings: fsl: add compatible for imx7ulp evk
Add compatible string for imx7ulp evk board.
Cc: devicetree@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Thu, 6 Dec 2018 10:09:05 +0000 (08:09 -0200)]
ARM: dts: imx7d-pico: Add the imx7d-pico-hobbit variant
The imx7d-pico-hobbit contains a imx7d-pico SoM and a hobbit baseboard.
Add support for it.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Thu, 6 Dec 2018 10:09:04 +0000 (08:09 -0200)]
ARM: dts: imx7d-pico-pi: Extend peripherals support
This adds following peripherals for the imx7d-pico-pi as:
- LED
- Touchscreen
- GPIO
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Thu, 6 Dec 2018 10:09:03 +0000 (08:09 -0200)]
ARM: dts: imx7d-pico: Extend peripherals support
This extends the peripherals supported by the imx7d-pico.dtsi. It
adds:
- I2C2
- Flexcan (flexcan1 and flexcan2 ports)
- USDHC1
- UART (6 and 7 ports)
- PWM (4 ports)
- eCSPI3
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Otavio Salvador [Thu, 6 Dec 2018 10:09:02 +0000 (08:09 -0200)]
ARM: dts: imx7d-pico: Improve WiFi regulator name
There are different models of WiFi being used in the SoM and the
handle name was too restrictive. This reworks it to a more generic and
meaningful name.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Thu, 6 Dec 2018 10:09:01 +0000 (08:09 -0200)]
ARM: dts: imx7d-pico: Pass the Ethernet PHY reset GPIO
Pass the "phy-reset-gpios" property in order to describe the GPIO
that performs the Ethernet PHY reset.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Thu, 6 Dec 2018 10:09:00 +0000 (08:09 -0200)]
ARM: dts: imx7d-pico: Pass the USBOTG1_PWR pinctrl
Pass the USBOTG1_PWR pinctrl description in the USBOTG GPIO
controlled regulator.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Thu, 6 Dec 2018 10:08:59 +0000 (08:08 -0200)]
ARM: dts: imx7d-pico-pi: Move SoM related part to imx7d-pico.dtsi
imx7d-pico-pi board contains:
- One SoM board (imx7d pico)
- One base board (pi).
In order to make it easier for adding support for other board variants,
move the commom SoM part to the imx7d-pico.dtsi file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Thu, 6 Dec 2018 10:08:58 +0000 (08:08 -0200)]
ARM: dts: imx7d-pico: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Thu, 6 Dec 2018 10:08:57 +0000 (08:08 -0200)]
ARM: dts: imx7d-pico: Do not harcode the memory size
Currently the memory size described in dts is 2GB, which is incorrect.
There are 512MB and 1GB versions of imx7d-pico boards, so remove
the hardcoded memory size and let the bootloader pass the correct
value to the kernel.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Shawn Guo [Mon, 10 Dec 2018 02:32:51 +0000 (10:32 +0800)]
Merge tag 'imx-fixes-4.20-3' into imx7d/pico
i.MX fixes for 4.20, round 3:
- A couple of fixes on imx7d-pico and imx7d-nitrogen7 boards to correct
the description of the Wifi clock.
- Change SW2ISO count to get a safer ARM LDO ramp-up time, so that
different boards can be covered. This fixes the ARM LDO failure seen
on some customer boards.
Andrey Smirnov [Thu, 6 Dec 2018 23:41:17 +0000 (21:41 -0200)]
ARM: dts: imx51-zii-rdu1: Do not specify "power-gpio" for hpa1
TPA6130A2 SD pin on RDU1 is not really controlled by SoC and instead
is only meant to notify the system that audio was "muted" by external
actors. To accommodate that, drop "power-gpio" property of hpa1 node as
well as specify a name for that GPIO so that userspace can access it.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Leonard Crestez [Thu, 6 Dec 2018 19:22:16 +0000 (19:22 +0000)]
ARM: dts: imx6ul: Remove extra space between node name and brace
Fixes:
7d1cd2978664 ("ARM: dts: imx6ul: add gpmi support")
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Thu, 6 Dec 2018 10:36:41 +0000 (08:36 -0200)]
ARM: dts: imx6qdl-sabresd: Use GPIO_ACTIVE_HIGH for regulators
Passing GPIO_ACTIVE_HIGH as GPIO flags for the GPIO controlled
regulator improves the readability, so use it instead of the
hardcoded number.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Dong Aisheng [Thu, 6 Dec 2018 03:51:27 +0000 (03:51 +0000)]
ARM: dts: imx6ul: add flexcan support
Add flexcan support for i.MX6UL board. Change the place of CAN node delete
due to i.MX6ULZ include i.MX6UL dts but not support flexcan.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Jonathan Marek [Tue, 4 Dec 2018 15:17:00 +0000 (10:17 -0500)]
ARM: dts: imx5: add gpu nodes
This adds the gpu nodes for the adreno 200 GPU on iMX51 and iMX53, now
supported by the freedreno driver.
The compatible for the iMX51 uses a patchid of 1, which is used by drm/msm
driver to identify the smaller 128KiB GMEM size.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Anson Huang [Thu, 6 Dec 2018 01:42:42 +0000 (01:42 +0000)]
ARM: dts: imx6qdl-sabresd: add accelerometer sensor support
Add accelerometer sensor mma8451 support on i2c1 bus.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Anson Huang [Thu, 6 Dec 2018 01:42:38 +0000 (01:42 +0000)]
ARM: dts: imx6qdl-sabresd: add magnetometer sensor support
Add magnetometer sensor mag3110 support on i2c3 bus.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Anson Huang [Thu, 6 Dec 2018 01:42:34 +0000 (01:42 +0000)]
ARM: dts: imx6qdl-sabresd: add light sensor support
Add isl29023 light sensor support on i2c3 bus, the light
sensor's power is controlled by a fixed regulator, since
the isl29023 driver and most of other sensors on same
board like mag3110 and mma8451 do NOT support regulator
operation currently, they are all controlled by this
regulator, so this patch also adds the fixed regulator
support and make it always on.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Thu, 6 Dec 2018 01:42:30 +0000 (01:42 +0000)]
ARM: dts: imx6qdl-sabresd: Move regulators outside of "simple-bus"
It is not recommended to place regulators inside "simple-bus", so move
them out to make it cleaner the addition of new regulators.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Marco Franchi [Wed, 5 Dec 2018 18:10:03 +0000 (16:10 -0200)]
ARM: dts: imx6qdl: Fix memory node duplication
Boards based on imx6qdl have duplicate memory nodes:
- One coming from the board device tree file: memory@
- One coming from the imx6qdl.dtsi file.
Fix the duplication by removing the memory node from
the imx6qdl.dtsi file and by adding 'device_type = "memory";'
in the board Device Tree.
Converted using the following command:
perl -p0777i -e 's/memory\@
10000000 \{\n/memory\@
10000000 \{\n\t\tdevice_type = \"memory\";\n/m' `find ./arch/arm/boot/dts -name "imx6*"``
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 5 Dec 2018 18:10:02 +0000 (16:10 -0200)]
ARM: dts: imx6dl-mamoj: Add a memory node
Add a memory node, with an empty memory size, which will be filled
by the bootloader.
This is done in preparation for removing the memory node from
imx6qdl.dtsi.
Reported-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 5 Dec 2018 18:10:01 +0000 (16:10 -0200)]
ARM: dts: imx53-voipac-dmm-668: Fix memory node duplication
imx53-voipac-dmm-668 has two memory nodes, but the correct representation
would be to use a single one with two reg entries - one for each RAM chip
select, so fix it accordingly.
Reported-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 5 Dec 2018 11:19:35 +0000 (09:19 -0200)]
ARM: dts: vf610-zii-scu4-aib: Add HI8435 support
On the vf610-zii-scu4-aib board there is a hi8435 (32-channel
discrete-to-digital SPI sensor device) in the DSPI0 bus.
Add support for it.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Anson Huang [Wed, 5 Dec 2018 01:14:25 +0000 (01:14 +0000)]
ARM: dts: imx6qdl-sabresd: add egalax touch screen support on i2c2 bus
Add egalax touch screen support on i2c2 bus, it is connected
to LVDS0, while the existing one on i2c3 bus is connected to
LVDS1.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Aisheng Dong [Mon, 3 Dec 2018 05:20:31 +0000 (05:20 +0000)]
ARM: dts: imx7s: Add flexcan stop mode wakeup support
Add stop-mode property which is required by stop mode wakeup
feature.
Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Aisheng Dong [Mon, 3 Dec 2018 05:20:27 +0000 (05:20 +0000)]
ARM: dts: imx6ul: Add flexcan stop mode wakeup support
Add stop-mode property which is required by stop mode wakeup
feature.
Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Aisheng Dong [Mon, 3 Dec 2018 05:20:23 +0000 (05:20 +0000)]
ARM: dts: imx6qdl: Add flexcan stop mode wakeup support
Add stop-mode property which is required by stop mode wakeup
feature.
Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Aisheng Dong [Mon, 3 Dec 2018 05:20:19 +0000 (05:20 +0000)]
ARM: dts: imx6sx: Add flexcan stop mode wakeup support
Add stop-mode property which is required by stop mode wakeup
feature.
Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Sun, 2 Dec 2018 21:18:09 +0000 (19:18 -0200)]
ARM: dts: imx6ul-pico: Add the imx6ul-pico-pi variant
The imx6ul-pico-pi contains a imx6ul-pico SoM and a pi baseboard:
https://www.technexion.com/products/pico-baseboards/detail/PICO-PI
Add support for it.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Sun, 2 Dec 2018 21:18:08 +0000 (19:18 -0200)]
ARM: dts: imx6ul-pico-hobbit: Extend peripherals support
This adds following peripherals support:
- ADC
- GPIO LED
- GPIOs
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Sun, 2 Dec 2018 21:18:07 +0000 (19:18 -0200)]
ARM: dts: imx6ul-pico-hobbit: Make the child led nodes standard
Use the same child led node and label name as used in the
imx7d-pico-hobbit board.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Sun, 2 Dec 2018 21:18:06 +0000 (19:18 -0200)]
ARM: dts: imx6ul-pico-hobbit: Move SoM related part to imx6ul-pico.dtsi
imx6ul-pico-hobbit board contains:
- One SoM board (imx6ul pico)
- One base board (hobbit).
In order to make it easier for adding support for other board variants,
move the commom SoM part to the imx6ul-pico.dtsi file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Sun, 2 Dec 2018 21:18:05 +0000 (19:18 -0200)]
ARM: dts: imx6ul-pico-hobbit: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Ma [Tue, 30 Oct 2018 02:36:01 +0000 (10:36 +0800)]
ARM: dts: ls1021a: add qdma device tree nodes
add the qDMA device tree nodes for LS1021A devices.
Signed-off-by: Wen He <wen.he_1@nxp.com>
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Sat, 1 Dec 2018 00:44:52 +0000 (22:44 -0200)]
ARM: dts: vf: Fix memory node duplication
Boards based on vf500/vf600 have duplicate memory nodes:
- One coming from the board dts file: memory@
- One coming from the vf500.dtsi/vf610m4.dtsi files.
Fix the duplication by removing the memory node from the dtsi file
and by adding 'device_type = "memory";' in the board dts.
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Mon, 3 Dec 2018 17:40:20 +0000 (15:40 -0200)]
ARM: dts: imx7: Correct mask for GIC PPI interrupts
The GIC_CPU_MASK_SIMPLE() macro should take as its argument the actual
number of CPU cores the interrupt controller is wired to.
i.MX7S contains a single Cortex-A7, hence the second interrupt specifier
cell for Private Peripheral Interrupts should use "GIC_CPU_MASK_SIMPLE(1)".
Likewise, i.MX7D contains two Cortex-A7 cores, so it should use
"GIC_CPU_MASK_SIMPLE(2)" instead.
Tested on a imx7s-warp.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Mon, 3 Dec 2018 17:40:19 +0000 (15:40 -0200)]
ARM: dts: imx6ul: Correct mask for GIC PPI interrupts
The GIC_CPU_MASK_SIMPLE() macro should take as its argument the actual
number of CPU cores the interrupt controller is wired to.
i.MX6UL contains a single Cortex-A7, hence the second interrupt specifier
cell for Private Peripheral Interrupts should use "GIC_CPU_MASK_SIMPLE(1)".
Tested on a imx6ul-evk.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Thu, 29 Nov 2018 11:18:14 +0000 (09:18 -0200)]
ARM: dts: imx53: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Thu, 29 Nov 2018 11:18:13 +0000 (09:18 -0200)]
ARM: dts: imx50: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Aisheng Dong [Wed, 28 Nov 2018 11:03:56 +0000 (11:03 +0000)]
ARM: dts: imx6qdl-sabreauto: add flexcan support
The flexcan1 is pin conflict with fec. User would make flexcan1 enabled
with fec disabled to use CAN.
Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Aisheng Dong [Wed, 28 Nov 2018 11:03:52 +0000 (11:03 +0000)]
ARM: dts: imx6sx-sabreauto: add flexcan support
The CAN transceiver on MX6SX Sabreauto board seems in sleep mode by default
after power up the board. User has to press the wakeup key on ARD baseboard
before using the transceiver, or it may not work properly when power up the
board at the first time(warm reset does not have such issue).
This patch operates the wake pin too besides stby/en pins by chaining them
together in regulator mode.
Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Aisheng Dong [Wed, 28 Nov 2018 11:03:48 +0000 (11:03 +0000)]
ARM: dts: imx6sx-sdb: add flexcan support
CAN transceiver is different on RevA and RevB board.
It's active high on RevA while active low on Rev B.
Signed-off-by: Aisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Patrick Havelange [Tue, 27 Nov 2018 14:09:44 +0000 (15:09 +0100)]
ARM: dts: ls1021a: add nodes for PWMs
The LS1021A has 8 possible PWMs, so adding them (disabled by default)
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Alex Gonzalez [Thu, 25 Oct 2018 15:09:33 +0000 (17:09 +0200)]
ARM: dts: ccimx6ulsbcpro: Add support for Goodix touch controller
The ConnectCore 6UL SBC Pro has an AUO/Goodix LCD accessory kit that is
connected on the LVDS interface through an on-board LVDS transceiver.
This change adds support for the touch interface.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Alex Gonzalez [Thu, 25 Oct 2018 15:09:31 +0000 (17:09 +0200)]
ARM: dts: ccimx6ulsbcpro: Enable AUO G101EVN010 lcdif panel
This change adds support for the AUO G101EVN010 lcdif panel for the
mxsfb DRM driver.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>