Anthony Liguori [Mon, 17 Sep 2012 15:23:15 +0000 (10:23 -0500)]
Merge remote-tracking branch 'kwolf/for-anthony' into staging
* kwolf/for-anthony:
block: Don't forget to delete temporary file
Don't require encryption password for 'qemu-img info' command
qemu-img: Add json output option to the info command.
qapi: Add SnapshotInfo and ImageInfo.
ahci: properly reset PxCMD on HBA reset
block: fix block tray status
vdi: Fix warning from clang
block/curl: Fix wrong free statement
ide: Fix error messages from static code analysis (no real error)
ATAPI: STARTSTOPUNIT only eject/load media if powercondition is 0
sheepdog: fix savevm and loadvm
Anthony Liguori [Mon, 17 Sep 2012 15:21:42 +0000 (10:21 -0500)]
Merge remote-tracking branch 'stefanha/trivial-patches' into staging
* stefanha/trivial-patches:
configure: fix seccomp check
arch_init.c: add missing '%' symbols before PRIu64 in debug printfs
kvm: Fix warning from static code analysis
qapi: Fix enumeration typo error
console: Clean up bytes per pixel calculation
Fix copy&paste typos in documentation comments
linux-user: Remove #if 0'd cpu_get_real_ticks() definition
ui: Fix spelling in comment (ressource -> resource)
Spelling fixes in comments and macro names (ressource -> resource)
Fix spelling (licenced -> licensed) in GPL
Spelling fixes in comments and documentation
srp: Don't use QEMU_PACKED for single elements of a structured type
Anthony Liguori [Mon, 17 Sep 2012 15:21:09 +0000 (10:21 -0500)]
Merge remote-tracking branch 'spice/spice.v60' into staging
* spice/spice.v60:
hw/qxl: support client monitor configuration via device
qxl: add trace-event for QXL_IO_LOG
hw/qxl: tracing fixes
qxl: better cleanup for surface destroy
qxl: Ignore set_client_capabilities pre/post migrate
qxl: dont update invalid area
spice: send updates only for changed screen content
spice: add screen mirror
spice: split qemu_spice_create_update
spice: switch to queue for vga mode updates
Anthony Liguori [Mon, 17 Sep 2012 15:20:48 +0000 (10:20 -0500)]
Merge remote-tracking branch 'stefanha/net' into staging
* stefanha/net:
net: EAGAIN handling for net/socket.c TCP
net: EAGAIN handling for net/socket.c UDP
net: asynchronous send/receive infrastructure for net/socket.c
net: broadcast hub packets if at least one port can receive
net: fix usbnet_receive() packet drops
net: clean up usbnet_receive()
net: add -netdev options to man page
net: do not report queued packets as sent
net: add receive_disabled logic to iov delivery path
eepro100: Fix network hang when rx buffers run out
xen: flush queue when getting an event
e1000: flush queue whenever can_receive can go from false to true
net: notify iothread after flushing queue
Anthony Liguori [Mon, 17 Sep 2012 15:20:27 +0000 (10:20 -0500)]
Merge remote-tracking branch 'qemu-kvm/uq/master' into staging
* qemu-kvm/uq/master:
kvm: Rename irqchip_inject_ioctl to irq_set_ioctl
kvm: Stop flushing coalesced MMIO on vmexit
VGA: Flush coalesced MMIO on related MMIO/PIO accesses
memory: Flush coalesced MMIO on mapping and state changes
memory: Fold memory_region_update_topology into memory_region_transaction_commit
memory: Use transaction_begin/commit also for single-step operations
memory: Flush coalesced MMIO on selected region access
kvm-all.c: Move init of irqchip_inject_ioctl out of kvm_irqchip_create()
update-linux-headers.sh: Don't hard code list of architectures
Anthony Liguori [Fri, 14 Sep 2012 13:17:03 +0000 (08:17 -0500)]
Revert "Add ability to disable build of all targets"
This reverts commit
66d5499b3754b83c09487259c08fe2ce73188a59.
This commit broke --target-list="x86_64-softmmu" and the fix isn't immediatley
obvious.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
David Gibson [Mon, 10 Sep 2012 02:30:57 +0000 (12:30 +1000)]
cpu_physical_memory_write_rom() needs to do TB invalidates
cpu_physical_memory_write_rom(), despite the name, can also be used to
write images into RAM - and will often be used that way if the machine
uses load_image_targphys() into RAM addresses.
However, cpu_physical_memory_write_rom(), unlike cpu_physical_memory_rw()
doesn't invalidate any cached TBs which might be affected by the region
written.
This was breaking reset (under full emu) on the pseries machine - we loaded
our firmware image into RAM, and while executing it rewrite the code at
the entry point (correctly causing a TB invalidate/refresh). When we
reset the firmware image was reloaded, but the TB from the rewrite was
still active and caused us to get an illegal instruction trap.
This patch fixes the bug by duplicating the tb invalidate code from
cpu_physical_memory_rw() in cpu_physical_memory_write_rom().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
David Gibson [Mon, 10 Sep 2012 02:30:56 +0000 (12:30 +1000)]
qemu-char: BUGFIX, don't call FD_ISSET with negative fd
tcp_chr_connect(), unlike for example udp_chr_update_read_handler() does
not check if the fd it is using is valid (>= 0) before passing it to
qemu_set_fd_handler2(). If using e.g. a TCP serial port, which is not
initially connected, this can result in -1 being passed to FD_ISSET, which
has undefined behaviour. On x86 it seems to harmlessly return 0, but on
PowerPC, it causes a fortify buffer overflow error to be thrown.
This patch fixes this by putting an extra test in tcp_chr_connect(), and
also adds an assert qemu_set_fd_handler2() to catch other such errors on
all platforms, rather than just some.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Wed, 12 Sep 2012 19:34:07 +0000 (14:34 -0500)]
Revert
455aa1e08 and
c3767ed0eb
commit
c3767ed0eb5d0bb25fe409ae5dec06e3411ff1b6
qemu-char: (Re-)connect for tcp_chr_write() unconnected writing
Has no hope of working because tcp_chr_connect() does not actually connect.
455aa1e08 just fixes the SEGV with server() but the attempt to connect a client
socket is still completely broken.
This patch reverts both.
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka [Tue, 11 Sep 2012 14:38:25 +0000 (16:38 +0200)]
pc: Drop practically unused BOCHS BIOS debug ports
We have debugcon these days to listen on those ports that receive debug
messages. Also drop the others that have no effect anymore.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Wed, 5 Sep 2012 19:50:16 +0000 (16:50 -0300)]
add -machine mem-merge=on|off option
It allows to disable memory merge support (KSM on Linux), which is
enabled by default otherwise.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Blue Swirl [Sun, 2 Sep 2012 15:28:56 +0000 (15:28 +0000)]
Remove unused CONFIG_TCG_PASS_AREG0 and dead code
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets,
remove dead code and support for !CONFIG_TCG_PASS_AREG0 case.
Remove dyngen-exec.h and all references to it. Although included by
hw/spapr_hcall.c, it does not seem to use it.
Remove unused HELPER_CFLAGS.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Blue Swirl [Sun, 2 Sep 2012 14:52:59 +0000 (14:52 +0000)]
target-mips: switch to AREG0 free mode
Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Blue Swirl [Sun, 2 Sep 2012 10:37:06 +0000 (10:37 +0000)]
target-sh4: switch to AREG0 free mode
Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Aurelien Jarno [Fri, 7 Sep 2012 14:13:27 +0000 (16:13 +0200)]
target-cris: Switch to AREG0 free mode
Add an explicit CPUCRISState parameter instead of relying on AREG0, and
use cpu_ld* in translation and interrupt handling. Remove AREG0 swapping
in tlb_fill(). Switch to AREG0 free mode
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Thu, 30 Aug 2012 14:56:39 +0000 (16:56 +0200)]
target-cris: Avoid AREG0 for helpers
Add an explicit CPUCRISState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Blue Swirl [Sun, 2 Sep 2012 08:39:22 +0000 (08:39 +0000)]
target-microblaze: switch to AREG0 free mode
Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Tue, 4 Sep 2012 20:25:59 +0000 (20:25 +0000)]
target-arm: final conversion to AREG0 free mode
Convert code load functions and switch to AREG0 free mode.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Blue Swirl [Tue, 4 Sep 2012 20:19:15 +0000 (20:19 +0000)]
target-arm: convert remaining helpers
Convert remaining helpers to AREG0 free mode: add an explicit
CPUState parameter instead of relying on AREG0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Blue Swirl [Tue, 4 Sep 2012 20:08:34 +0000 (20:08 +0000)]
target-arm: convert void helpers
Add an explicit CPUState parameter instead of relying on AREG0.
For easier review, convert only op helpers which don't return any value.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Blue Swirl [Sun, 2 Sep 2012 07:42:33 +0000 (07:42 +0000)]
target-unicore32: switch to AREG0 free mode
Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.
Tested-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 8 Sep 2012 10:48:20 +0000 (10:48 +0000)]
target-m68k: avoid using cpu_single_env
Pass around CPUState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 2 Sep 2012 07:27:38 +0000 (07:27 +0000)]
target-m68k: switch to AREG0 free mode
Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 2 Sep 2012 06:57:17 +0000 (06:57 +0000)]
target-lm32: switch to AREG0 free mode
Add an explicit CPUState parameter instead of relying on AREG0
and switch to AREG0 free mode.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 8 Sep 2012 11:15:37 +0000 (11:15 +0000)]
target-s390x: avoid cpu_single_env
Pass around CPUState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Natanael Copa [Wed, 12 Sep 2012 09:06:51 +0000 (09:06 +0000)]
configure: properly check if -lrt and -lm is needed
Fixes build against uClibc.
uClibc provides 2 versions of clock_gettime(), one with realtime
support and one without (this is so you can avoid linking in -lrt
unless actually needed). This means that the clock_gettime() don't
need -lrt. We still need it for timer_create() so we check for this
function in addition.
We also need check if -lm is needed for isnan().
Both -lm and -lrt are needed for libs_qga.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Stefan Weil [Wed, 12 Sep 2012 17:18:55 +0000 (19:18 +0200)]
tcg: Fix MAX_OPC_PARAM_IARGS
DEF_HELPER_FLAGS_5 was added some time ago without adjusting
MAX_OPC_PARAM_IARGS.
Fixing the definition becomes more important as QEMU is using
an increasing number of helper functions called with 5 arguments.
Add also a comment to avoid future problems when DEF_HELPER_FLAGS_6
will be added.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Yann E. MORIN [Thu, 6 Sep 2012 20:40:30 +0000 (22:40 +0200)]
configure: fix seccomp check
Currently, if libseccomp is missing but the user explicitly requested
seccomp support using --enable-seccomp, configure silently ignores the
situation and disables seccomp support.
This is unlike all other tests that explicitly fail in such situation.
Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Stefan Hajnoczi [Mon, 20 Aug 2012 09:14:35 +0000 (10:14 +0100)]
net: EAGAIN handling for net/socket.c TCP
Replace spinning send_all() with a proper non-blocking send. When the
socket write buffer limit is reached, we should stop trying to send and
wait for the socket to become writable again.
Non-blocking TCP sockets can return in two different ways when the write
buffer limit is reached:
1. ret = -1 and errno = EAGAIN/EWOULDBLOCK. No data has been written.
2. ret < total_size. Short write, only part of the message was
transmitted.
Handle both cases and keep track of how many bytes have been written in
s->send_index. (This includes the 'length' header before the actual
payload buffer.)
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Hajnoczi [Mon, 20 Aug 2012 09:28:53 +0000 (10:28 +0100)]
net: EAGAIN handling for net/socket.c UDP
Implement asynchronous send for UDP (or other SOCK_DGRAM) sockets. If
send fails with EAGAIN we wait for the socket to become writable again.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Hajnoczi [Mon, 20 Aug 2012 09:21:54 +0000 (10:21 +0100)]
net: asynchronous send/receive infrastructure for net/socket.c
The net/socket.c net client is not truly asynchronous. This patch
borrows the qemu_set_fd_handler2() code from net/tap.c as the basis for
proper asynchronous send/receive.
Only read packets from the socket when the peer is able to receive.
This avoids needless queuing.
Later patches implement asynchronous send.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Hajnoczi [Fri, 24 Aug 2012 12:50:30 +0000 (13:50 +0100)]
net: broadcast hub packets if at least one port can receive
In commit
60c07d933c66c4b30a83b7ccbc8a0cb3df1b2d0e ("net: fix
qemu_can_send_packet logic") the "VLAN" broadcast behavior was changed
to queue packets if any net client cannot receive. It turns out that
this was not actually the right fix and just hides the real bug that
hw/usb/dev-network.c:usbnet_receive() clobbers its receive buffer when
called multiple times in a row. The commit also introduced a new bug
that "VLAN" packets would not be sent if one of multiple net clients was
down.
The hw/usb/dev-network.c bug has since been fixed, so this patch reverts
broadcast behavior to send packets as long as one net client can
receive. Packets simply get queued for the net clients that are
temporarily unable to receive.
Reported-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Hajnoczi [Fri, 24 Aug 2012 12:37:29 +0000 (13:37 +0100)]
net: fix usbnet_receive() packet drops
The USB network interface has a single buffer which the guest reads
from. This patch prevents multiple calls to usbnet_receive() from
clobbering the input buffer. Instead we queue packets until buffer
space becomes available again.
This is inspired by virtio-net and e1000 rxbuf handling.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Hajnoczi [Fri, 24 Aug 2012 12:32:16 +0000 (13:32 +0100)]
net: clean up usbnet_receive()
The USB network interface has two code paths depending on whether or not
RNDIS mode is enabled. Refactor usbnet_receive() so that there is a
common path throughout the function instead of duplicating everything
across if (is_rndis(s)) ... else ... code paths.
Clean up coding style and 80 character line wrap along the way.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Hajnoczi [Tue, 14 Aug 2012 13:14:27 +0000 (14:14 +0100)]
net: add -netdev options to man page
Document the -netdev syntax which supercedes the older -net syntax.
This patch is a first step to making -netdev prominent in the QEMU
manual.
Reported-by: Anatoly Techtonik <techtonik@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Hajnoczi [Mon, 20 Aug 2012 12:35:23 +0000 (13:35 +0100)]
net: do not report queued packets as sent
Net send functions have a return value where 0 means the packet has not
been sent and will be queued. A non-zero value means the packet was
sent or an error caused the packet to be dropped.
This patch fixes two instances where packets are queued but we return
their size. This causes callers to believe the packets were sent. When
the caller uses the async send interface this creates a real problem
because the callback will be invoked for a packet that the caller
believed to be already sent. This bug can cause double-frees in the
caller.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Hajnoczi [Fri, 17 Aug 2012 20:16:42 +0000 (21:16 +0100)]
net: add receive_disabled logic to iov delivery path
This patch adds the missing NetClient->receive_disabled logic in the
sendv delivery code path. It seems that commit
893379efd0e1b84ceb0c42a713293f3dbd27b1bd ("net: disable receiving if
client returns zero") only added the logic to qemu_deliver_packet() and
not qemu_deliver_packet_iov().
The receive_disabled flag should be automatically set when .receive(),
.receive_raw(), or .receive_iov() return 0. No further packets will be
delivered to the NetClient until the receive_disabled flag is cleared
again by calling qemu_flush_queued_packets().
Typically the NetClient will wait until its file descriptor becomes
writable and then invoke qemu_flush_queued_packets() to resume
transmission.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Bo Yang [Wed, 29 Aug 2012 11:26:11 +0000 (19:26 +0800)]
eepro100: Fix network hang when rx buffers run out
This is reported by QA. When installing os with pxe, after the initial
kernel and initrd are loaded, the procedure tries to copy files from install
server to local harddisk, the network becomes stall because of running out of
receive descriptor.
[Whitespace fixes and removed qemu_notify_event() because Paolo's
earlier net patches have moved it into qemu_flush_queued_packets().
Additional info:
I can reproduce the network hang with a tap device doing a iPXE HTTP
boot as follows:
$ qemu -enable-kvm -m 1024 \
-netdev tap,id=netdev0,script=no,downscript=no \
-device i82559er,netdev=netdev0,romfile=
80861209.rom \
-drive if=virtio,cache=none,file=test.img
iPXE> ifopen net0
iPXE> config # set static network configuration
iPXE> kernel http://mirror.bytemark.co.uk/fedora/linux/releases/17/Fedora/x86_64/os/images/pxeboot/vmlinuz
I needed a vanilla iPXE ROM to get to the iPXE prompt. I think the boot
prompt has been disabled in the ROMs that ship with QEMU to reduce boot
time.
During the vmlinuz HTTP download there is a network hang. hw/eepro100.c
has reached the end of the rx descriptor list. When the iPXE driver
replenishes the rx descriptor list we don't kick the QEMU net subsystem
and event loop, thereby leaving the tap netdev without its file
descriptor in select(2).
Stefan Hajnoczi <stefanha@gmail.com>]
Signed-off-by: Bo Yang <boyang@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Paolo Bonzini [Thu, 9 Aug 2012 14:45:57 +0000 (16:45 +0200)]
xen: flush queue when getting an event
xen does not have a register that, when written, will cause can_receive
to go from false to true. However, flushing the queue can be attempted
whenever the front-end raises its side of the Xen event channel. There
is a single event channel for tx and rx.
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Paolo Bonzini [Thu, 9 Aug 2012 14:45:56 +0000 (16:45 +0200)]
e1000: flush queue whenever can_receive can go from false to true
When the guests replenish the receive ring buffer, the network device
should flush its queue of pending packets. This is done with
qemu_flush_queued_packets.
e1000's can_receive can go from false to true when RCTL or RDT are
modified.
Reported-by: Luigi Rizzo <rizzo@iet.unipi.it>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Jan Kiszka <jan.kiszka@siemens.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Paolo Bonzini [Thu, 9 Aug 2012 14:45:55 +0000 (16:45 +0200)]
net: notify iothread after flushing queue
virtio-net has code to flush the queue and notify the iothread
whenever new receive buffers are added by the guest. That is
fine, and indeed we need to do the same in all other drivers.
However, notifying the iothread should be work for the network
subsystem. And since we are at it we can add a little smartness:
if some of the queued packets already could not be delivered,
there is no need to notify the iothread.
Reported-by: Luigi Rizzo <rizzo@iet.unipi.it>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Jan Kiszka <jan.kiszka@siemens.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Igor Mitsyanko [Wed, 5 Sep 2012 09:04:56 +0000 (13:04 +0400)]
arch_init.c: add missing '%' symbols before PRIu64 in debug printfs
'%' symbols were missing in front of PRIu64 macros in DPRINTF() messages in
arch_init.c, this caused compilation warnings when compiled with DEBUG_ARCH_INIT defined.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Stefan Weil [Mon, 3 Sep 2012 20:40:40 +0000 (22:40 +0200)]
kvm: Fix warning from static code analysis
Report from smatch:
kvm-all.c:1373 kvm_init(135) warn:
variable dereferenced before check 's' (see line 1360)
's' cannot by NULL (it was alloced using g_malloc0), so there is no need
to check it here.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Lei Li [Thu, 23 Aug 2012 05:14:25 +0000 (13:14 +0800)]
qapi: Fix enumeration typo error
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
BALATON Zoltan [Wed, 22 Aug 2012 15:19:42 +0000 (17:19 +0200)]
console: Clean up bytes per pixel calculation
Division with round up is the correct way to compute this even if the
only case where division with round down gives incorrect result is
probably 15 bpp. This case was explicitely patched up in one of these
functions but was unhandled in the other. (I'm not sure about setting
16 bpp for the 15bpp case either but I left that there for now.)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
BALATON Zoltan [Wed, 22 Aug 2012 15:18:38 +0000 (17:18 +0200)]
Fix copy&paste typos in documentation comments
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Peter Maydell [Mon, 20 Aug 2012 13:03:36 +0000 (14:03 +0100)]
linux-user: Remove #if 0'd cpu_get_real_ticks() definition
Remove the cpu_get_real_ticks() definition from linux-user/main.c.
This has been disabled via #if 0 and unused since commit
1dce7c3c22
in 2006; the definitions we actually use are in qemu-timer.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Fri, 17 Aug 2012 13:20:00 +0000 (15:20 +0200)]
ui: Fix spelling in comment (ressource -> resource)
The function is called interface_release_resource.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Thu, 16 Aug 2012 13:12:21 +0000 (15:12 +0200)]
Spelling fixes in comments and macro names (ressource -> resource)
Macro XEN_HOST_PCI_RESOURCE_BUFFER_SIZE is only used locally,
so the change should be safe.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Fri, 10 Aug 2012 20:03:26 +0000 (22:03 +0200)]
Fix spelling (licenced -> licensed) in GPL
The patch also fixes the case of "written".
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Fri, 10 Aug 2012 20:03:25 +0000 (22:03 +0200)]
Spelling fixes in comments and documentation
These wrong spellings were detected by codespell:
* successully -> successfully
* alot -> a lot
* wanna -> want to
* infomation -> information
* occured -> occurred
["also is" -> "is also" and "ressources" -> "resources" suggested by
Peter Maydell <peter.maydell@linaro.org>]
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Stefan Weil [Fri, 10 Aug 2012 20:03:27 +0000 (22:03 +0200)]
srp: Don't use QEMU_PACKED for single elements of a structured type
QEMU_PACKED results in a MinGW compiler warning when it is
used for single structure elements:
warning: 'gcc_struct' attribute ignored
Using QEMU_PACKED for the whole structure avoids the compiler warning
without changing the memory layout.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Alon Levy [Wed, 12 Sep 2012 13:13:28 +0000 (16:13 +0300)]
hw/qxl: support client monitor configuration via device
Until now we used only the agent to change the monitor count and each
monitor resolution. This patch introduces the qemu part of using the
device as the mediator instead of the agent via virtio-serial.
Spice (>=0.11.5) calls the new QXLInterface::client_monitors_config,
which returns wether the interrupt is enabled, and if so and given a non
NULL monitors config will
generate an interrupt QXL_INTERRUPT_CLIENT_MONITORS_CONFIG with crc
checksum for the guest to verify a second call hasn't interfered.
The maximal number of monitors is limited on the QXLRom to 64.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Alon Levy [Wed, 12 Sep 2012 13:13:27 +0000 (16:13 +0300)]
qxl: add trace-event for QXL_IO_LOG
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Alon Levy [Wed, 12 Sep 2012 13:13:26 +0000 (16:13 +0300)]
hw/qxl: tracing fixes
Add two new trace events:
qxl_send_events(int qid, uint32_t events) "%d %d"
qxl_set_guest_bug(int qid) "%d"
Change qxl_io_unexpected_vga_mode parameters to be equivalent to those
of qxl_io_write for easier grouping under a single systemtap probe.
Change d to qxl in one place.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Dunrong Huang [Wed, 5 Sep 2012 13:26:22 +0000 (21:26 +0800)]
block: Don't forget to delete temporary file
The caller would not delete temporary file after failed get_tmp_filename().
Signed-off-by: Dunrong Huang <riegamaths@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Daniel P. Berrange [Mon, 10 Sep 2012 11:11:31 +0000 (12:11 +0100)]
Don't require encryption password for 'qemu-img info' command
The encryption password is only required if I/O is going to be
performed on a disk image. The 'qemu-img info' command merely
reports metadata, so it should not ask for a decryption password
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Benoît Canet [Wed, 5 Sep 2012 11:09:02 +0000 (13:09 +0200)]
qemu-img: Add json output option to the info command.
This option --output=[human|json] make qemu-img info output on
human or JSON representation at the choice of the user.
example:
{
"snapshots": [
{
"vm-clock-nsec":
637102488,
"name": "vm-
20120821145509",
"date-sec":
1345553709,
"date-nsec":
220289000,
"vm-clock-sec": 20,
"id": "1",
"vm-state-size":
96522745
},
{
"vm-clock-nsec":
28210866,
"name": "vm-
20120821154059",
"date-sec":
1345556459,
"date-nsec":
171392000,
"vm-clock-sec": 46,
"id": "2",
"vm-state-size":
101208714
}
],
"virtual-size":
1073741824,
"filename": "snap.qcow2",
"cluster-size": 65536,
"format": "qcow2",
"actual-size":
985587712,
"dirty-flag": false
}
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Benoît Canet [Wed, 5 Sep 2012 11:09:01 +0000 (13:09 +0200)]
qapi: Add SnapshotInfo and ImageInfo.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jason Baron [Tue, 4 Sep 2012 20:08:08 +0000 (16:08 -0400)]
ahci: properly reset PxCMD on HBA reset
While testing q35, I found that windows 7 (specifically, windows 7 ultimate
with sp1 x64), wouldn't install because it can't find the cdrom or disk drive.
The failure message is: 'A required cd/dvd device driver is missing. If you
have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now.'
This can also be reproduced on piix by adding an ahci controller, and
observing that windows 7 does not see any devices behind it.
The problem is that when windows issues a HBA reset, qemu does not reset the
individual ports' PxCMD register. Windows 7 then reads back the PxCMD register
and presumably assumes that the ahci controller has already been initialized.
Windows then never sets up the PxIE register to enable interrupts, and thus it
never gets irqs back when it sends ata device inquiry commands.
This change brings qemu into ahci 1.3 specification compliance.
Section 10.4.3 HBA Reset:
"
When GHC.HR is set to '1', GHC.AE, GHC.IE, the IS register, and all port
register fields (except PxFB/PxFBU/PxCLB/PxCLBU) that are not HwInit in the
HBA's register memory space are reset.
"
I've also re-tested Fedora 16 and 17 to verify that they continue to work with
this change.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pavel Hrdina [Thu, 9 Aug 2012 10:44:48 +0000 (12:44 +0200)]
block: fix block tray status
The tray status should change also if you eject empty block device.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Weil [Fri, 17 Aug 2012 13:23:24 +0000 (15:23 +0200)]
vdi: Fix warning from clang
ccc-analyzer reports these warnings:
block/vdi.c:704:13: warning: Dereference of null pointer
bmap[i] = VDI_UNALLOCATED;
^
block/vdi.c:702:13: warning: Dereference of null pointer
bmap[i] = i;
^
Moving some code into the if block fixes this.
It also avoids calling function write with 0 bytes of data.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Weil [Sat, 1 Sep 2012 09:06:45 +0000 (11:06 +0200)]
block/curl: Fix wrong free statement
Report from smatch:
block/curl.c:546 curl_close(21) info: redundant null check on s->url calling free()
The check was redundant, and free was also wrong because the memory
was allocated using g_strdup.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Weil [Mon, 3 Sep 2012 20:13:56 +0000 (22:13 +0200)]
ide: Fix error messages from static code analysis (no real error)
Report from smatch:
hw/ide/core.c:1472 ide_exec_cmd(423) error: buffer overflow 'smart_attributes' 8 <= 29
hw/ide/core.c:1474 ide_exec_cmd(425) error: buffer overflow 'smart_attributes' 8 <= 29
hw/ide/core.c:1475 ide_exec_cmd(426) error: buffer overflow 'smart_attributes' 8 <= 29
...
The upper limit of 30 was never reached because both for loops terminated
when 'smart_attributes' reached end of list, so there was no real buffer
overflow.
Nevertheless, changing the code not only fixes the error report, but also
reduces the size of smart_attributes and simplifies the for loops.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Ronnie Sahlberg [Tue, 31 Jul 2012 01:28:26 +0000 (11:28 +1000)]
ATAPI: STARTSTOPUNIT only eject/load media if powercondition is 0
The START STOP UNIT command will only eject/load media if
power condition is zero.
If power condition is !0 then LOEJ and START will be ignored.
From MMC (sbc contains similar wordings too)
The Power Conditions field requests the block device to be placed
in the power condition defined in
Table 558. If this field has a value other than 0h then the Start
and LoEj bits shall be ignored.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
MORITA Kazutaka [Wed, 29 Aug 2012 18:39:45 +0000 (03:39 +0900)]
sheepdog: fix savevm and loadvm
This patch sets data to be sent to Sheepdog correctly and fixes savevm
and loadvm operations on a Sheepdog image.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Uri Lublin [Tue, 11 Sep 2012 07:09:58 +0000 (10:09 +0300)]
qxl: better cleanup for surface destroy
Add back a call to qxl_spice_destroy_surface_wait_complete() in qxl_spice_destroy_surface_wait(),
that was removed by commit
c480bb7da465186b84d8427e068ef7502e47ffbf
It is needed to complete surface-removal cleanup, for non async.
For async, qxl_spice_destroy_surface_wait_complete is called upon operation completion.
Signed-off-by: Uri Lublin <uril@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hans de Goede [Fri, 7 Sep 2012 19:48:22 +0000 (21:48 +0200)]
qxl: Ignore set_client_capabilities pre/post migrate
The recent introduction of set_client_capabilities has broken
(seamless) migration by trying to call qxl_send_events pre (seamless
incoming) and post (*) migration, triggering the following assert:
qxl_send_events: Assertion `qemu_spice_display_is_running(&d->ssd)' failed.
The solution is easy, pre migration the guest will have already received
the client caps on the migration source side, and post migration there no
longer is a guest, so we can simply ignore the set_client_capabilities call
in both those scenarios.
*) Post migration, so not fatal for to the migration itself, but still a crash
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Dunrong Huang [Thu, 30 Aug 2012 16:44:44 +0000 (00:44 +0800)]
qxl: dont update invalid area
This patch fixes the following error:
$ ~/usr/bin/qemu-system-x86_64 -enable-kvm -m 1024 -spice port=5900,disable-ticketing -vga qxl -cdrom ~/Images/linuxmint-13-mate-dvd-32bit.iso
(/home/mathslinux/usr/bin/qemu-system-x86_64:10068): SpiceWorker-CRITICAL **: red_worker.c:4599:red_update_area: condition `area->left >= 0 && area->top >= 0 && area->left < area->right && area->top < area->bottom' failed
Aborted
spice server terminates QEMU process if we pass invalid area to it,
so dont update those invalid areas.
Signed-off-by: Dunrong Huang <riegamaths@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 5 Sep 2012 08:41:42 +0000 (10:41 +0200)]
spice: send updates only for changed screen content
when creating screen updates go compare the current guest screen
against the mirror (which holds the most recent update sent), then
only create updates for the screen areas which did actually change.
[ v2: drop redundant qemu_spice_create_one_update call ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 5 Sep 2012 07:35:57 +0000 (09:35 +0200)]
spice: add screen mirror
Create a screen mirror, keep there a copy of the most recent update
passed on to spice-server.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 5 Sep 2012 06:52:23 +0000 (08:52 +0200)]
spice: split qemu_spice_create_update
Creating one function which creates a single update for a given
rectangle. And one (for now) pretty simple wrapper around it to
queue up screen updates for the dirty region.
[ v2: also update bounding box ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 5 Sep 2012 06:25:08 +0000 (08:25 +0200)]
spice: switch to queue for vga mode updates
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Jan Kiszka [Fri, 24 Aug 2012 11:34:47 +0000 (13:34 +0200)]
kvm: Rename irqchip_inject_ioctl to irq_set_ioctl
This variable is no longer bound to irqchip, and the IOCTL sets the IRQ
level, does not directly inject it. No functional changes.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Jan Kiszka [Thu, 23 Aug 2012 11:02:34 +0000 (13:02 +0200)]
kvm: Stop flushing coalesced MMIO on vmexit
The memory subsystem will now take care of flushing whenever affected
regions are accessed or the memory mapping changes.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Jan Kiszka [Thu, 23 Aug 2012 11:02:33 +0000 (13:02 +0200)]
VGA: Flush coalesced MMIO on related MMIO/PIO accesses
In preparation of stopping to flush coalesced MMIO unconditionally on
vmexits, mark VGA MMIO and PIO regions as synchronous /wrt coalesced
MMIO and flush the buffer explicitly on PIO accesses that do not use
generic memory regions yet.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Jan Kiszka [Thu, 23 Aug 2012 11:02:32 +0000 (13:02 +0200)]
memory: Flush coalesced MMIO on mapping and state changes
Flush pending coalesced MMIO before performing mapping or state changes
that could affect the event orderings or route the buffered requests to
a wrong region.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Jan Kiszka [Thu, 23 Aug 2012 11:02:31 +0000 (13:02 +0200)]
memory: Fold memory_region_update_topology into memory_region_transaction_commit
Simplify the code as we are using now only a subset of the original
features of memory_region_update_topology.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Jan Kiszka [Thu, 23 Aug 2012 11:02:30 +0000 (13:02 +0200)]
memory: Use transaction_begin/commit also for single-step operations
Wrap also simple operations consisting only of a single step with
memory_region_transaction_begin/commit. This allows to perform
additional steps like coalesced MMIO flushing from a single place.
This requires dropping some micro-optimizations: The skipping of
topology updates after updating disabled or unregistered regions.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Jan Kiszka [Thu, 23 Aug 2012 11:02:29 +0000 (13:02 +0200)]
memory: Flush coalesced MMIO on selected region access
Instead of flushing pending coalesced MMIO requests on every vmexit,
this provides a mechanism to selectively flush when memory regions
related to the coalesced one are accessed. This first of all includes
the coalesced region itself but can also applied to other regions, e.g.
of the same device, by calling memory_region_set_flush_coalesced.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Peter Maydell [Wed, 15 Aug 2012 11:08:13 +0000 (12:08 +0100)]
kvm-all.c: Move init of irqchip_inject_ioctl out of kvm_irqchip_create()
Move the init of the irqchip_inject_ioctl field of KVMState out of
kvm_irqchip_create() and into kvm_init(), so that kvm_set_irq()
can be used even when no irqchip is created (for architectures
that support async interrupt notification even without an in
kernel irqchip).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Peter Maydell [Wed, 18 Jul 2012 10:11:09 +0000 (11:11 +0100)]
update-linux-headers.sh: Don't hard code list of architectures
Rather than hardcoding the list of architectures in the kernel
header update script, just import headers for every architecture
which supports KVM (with a blacklist exception for ia64 which
has KVM headers but is dead). This reduces the number of QEMU
files which need to be updated to add support for a new KVM
architecture.
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Aurelien Jarno [Tue, 11 Sep 2012 16:06:56 +0000 (18:06 +0200)]
Merge branch 'usb.64' of git://git.kraxel.org/qemu
* 'usb.64' of git://git.kraxel.org/qemu: (54 commits)
xhci: allow bytewise capability register reads
xhci: kill xhci_mem_{read,write} dispatcher functions
xhci: support multiple interrupters
xhci: pick target interrupter
xhci: prepare xhci_runtime_{read,write} for multiple interrupters
xhci: add XHCIInterrupter
xhci: move register update into xhci_intr_raise
xhci: add msix support
xhci: rework interrupt handling
xhci: fix & cleanup msi.
usb-storage: usb3 support
usb3: bos decriptor
usb3: superspeed endpoint companion
usb3: superspeed descriptors
xhci: update port handling
xhci: update register layout
xhci: fix runtime write tracepoint
xhci: add trace_usb_xhci_ep_set_dequeue
xhci: trace cc codes in cleartext
xhci: iso xfer support
...
Aurelien Jarno [Fri, 7 Sep 2012 10:24:32 +0000 (12:24 +0200)]
tcg/optimize: fix if/else/break coding style
optimizer.c contains some cases were the break is appearing in both the
if and the else parts. Fix that by moving it to the outer part. Also
move some common code there.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Thu, 6 Sep 2012 14:47:14 +0000 (16:47 +0200)]
tcg/optimize: add constant folding for brcond
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Thu, 6 Sep 2012 14:47:14 +0000 (16:47 +0200)]
tcg/optimize: add constant folding for setcond
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Thu, 6 Sep 2012 14:47:14 +0000 (16:47 +0200)]
tcg/optimize: swap brcond/setcond arguments when possible
brcond and setcond ops are not commutative, but it's easy to compute the
new condition after swapping the arguments. Try to always put the constant
argument in second position like for commutative ops, to help backends to
generate better code.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Thu, 6 Sep 2012 14:47:14 +0000 (16:47 +0200)]
tcg/optimize: simplify shift/rot r, 0, a => movi r, 0 cases
shift/rot r, 0, a is equivalent to movi r, 0.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Thu, 6 Sep 2012 14:47:14 +0000 (16:47 +0200)]
tcg/optimize: simplify and r, a, 0 cases
and r, a, 0 is equivalent to a movi r, 0.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Thu, 6 Sep 2012 14:47:14 +0000 (16:47 +0200)]
tcg/optimize: simplify or/xor r, a, 0 cases
or/xor r, a, 0 is equivalent to a mov r, a.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Thu, 6 Sep 2012 14:47:13 +0000 (16:47 +0200)]
tcg/optimize: split expression simplification
Split expression simplification in multiple parts so that a given op
can appear multiple times. This patch should not change anything.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Aurelien Jarno [Thu, 6 Sep 2012 14:47:13 +0000 (16:47 +0200)]
tcg: improve profiler
Now that there are two passes of optimization (optimize.c, liveness)
there is no point of outputing the statistics of the liveness part
only. Update the code to take into account both optimizations.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Gerd Hoffmann [Tue, 4 Sep 2012 12:48:03 +0000 (14:48 +0200)]
xhci: allow bytewise capability register reads
Some guests need this according to
Alejandro Martinez Ruiz <alex@securiforest.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Tue, 4 Sep 2012 12:42:20 +0000 (14:42 +0200)]
xhci: kill xhci_mem_{read,write} dispatcher functions
... and register subregions instead, so we offload the dispatching
to the the memory subsystem which is designed to handle it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Tue, 4 Sep 2012 10:56:55 +0000 (12:56 +0200)]
xhci: support multiple interrupters
Everything is in place, flip the big switch now
and enable support for multiple interrupters.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Fri, 31 Aug 2012 13:30:51 +0000 (15:30 +0200)]
xhci: pick target interrupter
Pick the correct interrupter when queuing an event.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Thu, 30 Aug 2012 15:15:12 +0000 (17:15 +0200)]
xhci: prepare xhci_runtime_{read,write} for multiple interrupters
Prepare xhci runtime register access function for multiple interrupters.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Thu, 30 Aug 2012 13:49:03 +0000 (15:49 +0200)]
xhci: add XHCIInterrupter
Move all state belonging to the (single) interrupter into a separate
struct. First step in adding support for multiple interrupters.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Thu, 30 Aug 2012 12:04:04 +0000 (14:04 +0200)]
xhci: move register update into xhci_intr_raise
Now that we have a separate function to raise an IRQ we can move
some comon code into the function.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Thu, 30 Aug 2012 10:06:59 +0000 (12:06 +0200)]
xhci: add msix support
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>