Tom Rini [Mon, 9 Feb 2015 15:25:20 +0000 (10:25 -0500)]
Merge git://git.denx.de/u-boot-arc
Alexey Brodkin [Tue, 3 Feb 2015 10:58:20 +0000 (13:58 +0300)]
arc: build libgcc in U-Boot
This way we may have very limited set of functions implemented so we
save some space.
Also it allows us to build U-Boot for any ARC core with the same one
toolchain because we don't rely on pre-built libgcc.
For example:
* we may use little-endian toolchain but build U-Boot for ether
endianess
* we may use non-multilibbed uClibc toolchain but build U-Boot for
whatever ARC CPU flavour that current GCC supports
Private libgcc built from generic C implementation contributes only 144
bytes to .text section so we don't see significant degradation of size:
--->8---
$ arc-linux-size u-boot.libgcc-prebuilt
text data bss dec hex filename
222217 24912 214820 461949 70c7d u-boot.libgcc-prebuilt
$ arc-linux-size u-boot.libgcc-private
text data bss dec hex filename
222361 24912 214820 462093 70d0d u-boot.libgcc-private
--->8---
Also I don't notice visible performance degradation compared to
pre-built libgcc (where at least "*div*" functions are had-written in
assembly) on typical operations of downloading 10Mb uImage over TFTP and
bootm.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Alexey Brodkin [Tue, 3 Feb 2015 10:58:19 +0000 (13:58 +0300)]
arc: move CPU flags selection to the main "config.mk"
As a preparation to ARCv2 port submission we're moving CPU slection
flags to a common location.
Also it will allow us to have more flexible CPU specification, not only
ISA version but CPU family as well checking CONFIG_ARC_CPU_xxx.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Alexey Brodkin [Tue, 3 Feb 2015 10:58:18 +0000 (13:58 +0300)]
arc: move SYS_MONITOR_BASE setup in Konfig
Following SPARK ARC now has SYS_MONITOR_BASE setup via Kconfig.
This makes "include/configs/*.h" cleaner and more flexible.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Alexey Brodkin [Tue, 3 Feb 2015 10:58:17 +0000 (13:58 +0300)]
arc: hard-code CONFIG_ARCH_EARLY_INIT_R in asm/config.h
Common arch_early_init_r() is used in "arc/lib/cpu.c" for all ARC boards
so there's no sense in separate per-board definitions.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Alexey Brodkin [Tue, 3 Feb 2015 10:58:16 +0000 (13:58 +0300)]
arc: get rid of useless CONFIG_SKIP_LOWLEVEL_INIT
Currently there's nothing related to really low-level init on ARC so
CONFIG_SKIP_LOWLEVEL_INIT definition makes no sense.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Alexey Brodkin [Tue, 3 Feb 2015 10:58:15 +0000 (13:58 +0300)]
arc: hard-code CONFIG_SYS_GENERIC_BOARD into asm/config.h
There're no other options for ARC except "generic board" so ther's no
point to define CONFIG_SYS_GENERIC_BOARD per board.
We now have it set fo all ARC boards.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Alexey Brodkin [Tue, 3 Feb 2015 10:58:14 +0000 (13:58 +0300)]
arc: add selection of endianess in Kconfig
This change allows to keep board description clean and minimalistic.
This is especially helpful if one board may house different CPUs with
different features.
It is applicable to both FPGA-based boards or those that have CPUs
mounted on interchnagable daughter-boards.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Alexey Brodkin [Tue, 3 Feb 2015 10:58:13 +0000 (13:58 +0300)]
arc: select cache settings via menuconfig
This change allows to keep board description clean and minimalistic.
This is especially helpful if one board may house different CPUs with
different features.
It is applicable to both FPGA-based boards or those that have CPUs
mounted on interchnagable daughter-boards.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Alexey Brodkin [Tue, 3 Feb 2015 10:58:12 +0000 (13:58 +0300)]
arc: define and use PTAG AUX regs for MMUv3 only
DC_PTAG and IC_PTAG registers only exist in MMUv3.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Alexey Brodkin [Tue, 3 Feb 2015 10:58:11 +0000 (13:58 +0300)]
arc: add more flavours of ARC700 series CPU
Now we may select a particular version of ARC700:
* ARC750D or
* ARC770D
It allows more flexible (or more fine tuned) configuration of U-Boot.
Before that change we relied on minimal configuration but now we may
use specific features of each CPU.
Moreover allows us to escape manual selection of options that
exist in both CPUs but may have say different version like MMUv2 in
ARC750D vs MMUv3 in ARC770D.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Alexey Brodkin [Tue, 3 Feb 2015 10:58:10 +0000 (13:58 +0300)]
arc: remove CPU hard-coded selection from board description in include/configs
With switch to Kconfig we only need very board-specific descriptions in
include/configs.
CPU selection is performed with either defconfig or manually via
menuconfig.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Igor Guryanov [Tue, 3 Feb 2015 10:58:09 +0000 (13:58 +0300)]
arc: memcmp - fix zero-delay loop utilization
It's prohibited to put branch instruction in the very end of zero-delay
loop. On execution this causes "Illegal instruction" exception.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Igor Guryanov <guryanov@synopsys.com>
Tom Rini [Sat, 7 Feb 2015 12:03:00 +0000 (07:03 -0500)]
kwbimage: Make the Makefile pass in CONFIG_SYS_SPI_U_BOOT_OFFS
We can't use config.h directly as some platforms include headers that
aren't safe to use in normal Linux userland.
Signed-off-by: Tom Rini <trini@ti.com>
Tom Rini [Fri, 6 Feb 2015 17:02:59 +0000 (12:02 -0500)]
Merge git://git.denx.de/u-boot-marvell
Stefan Roese [Mon, 19 Jan 2015 10:33:39 +0000 (11:33 +0100)]
arm: mvebu: maxbcm: Fix compilation warning and add Spansion SPI NOR support
This patch fixes the following compilation warning for maxbcm:
Building maxbcm board...
text data bss dec hex filename
160075 6596 38240 204911 3206f ./u-boot
board/maxbcm/maxbcm.c: In function 'reset_phy':
board/maxbcm/maxbcm.c:68:6: warning: unused variable 'reg' [-Wunused-variable]
u16 reg;
^
board/maxbcm/maxbcm.c:66:6: warning: unused variable 'devadr' [-Wunused-variable]
u16 devadr = CONFIG_PHY_BASE_ADDR;
^
Additionally support Spansion SPI NOR flash is added. With larger SPI device
support via the CONFIG_SPI_FLASH_BAR define.
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
Stefan Roese [Mon, 19 Jan 2015 10:33:40 +0000 (11:33 +0100)]
arm: mvebu: drivers/ddr: Add DDR3 driver with training code from Marvell bin_hdr
This patch adds the DDR3 setup and training code taken from the Marvell
U-Boot repository. This code used to be included as a binary (bin_hdr)
into the AXP boot image. Not linked with the main U-Boot. With this code
addition and the following serdes/PHY setup code, the Armada-XP support
in mainline U-Boot is finally self-contained. So the complete image
for booting can be built from mainline U-Boot. Without any additional
external inclusion. Hopefully other MVEBU SoC's will follow here.
Support for some SoC's has been removed in this version. This is:
MV_MSYS:
The code referred to by the MV_MSYS define is currently unused. And its
not really planned to support this in mainline. So lets remove it to
make the code clearer and increase the readability.
MV88F68XX (A38x):
The code referred to by the MV88F68XX define (A38x) is currently unused.
And its partial and not sufficient for this device in this stage.
So lets remove it to make the code clearer and increase the readability.
MV88F66XX (ALP):
The code referred to by the MV88F66XX define is currently unused. And its
not really planned to support this in mainline. So lets remove it to
make the code clearer and increase the readability.
MV88F78X60_Z1:
The code referred to by the MV88F78X60_Z1 define is currently unused. As the
Z1 revision of the AXP is not supported in mainline anymore.
So lets remove it to make the code clearer and increase the readability.
Remove support for Z1 & A0 AXP revisions (steppings). The current stepping
is B0 and this is the only one that is actively supported in this code
version.
Tested on AXP using a SPD DIMM setup on the Marvell DB-MV784MP-GP board and
on a custom fixed DDR configuration board (maxbcm).
Note:
This code has undergone many hours of coding-style cleanup and refactoring.
It still is not checkpatch clean though, I'm afraid. As the factoring of the
code has so many levels of indentation that many lines are longer than 80
chars. This might be some task to tackly later on.
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
Stefan Roese [Mon, 19 Jan 2015 10:33:41 +0000 (11:33 +0100)]
arm: mvebu: Add Serdes PHY config code
This code is ported from the Marvell bin_hdr code into mainline
SPL U-Boot. It needs to be executed very early so that the devices
connected to the serdes PHY are configured correctly.
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
Stefan Roese [Mon, 19 Jan 2015 10:33:42 +0000 (11:33 +0100)]
arm: armada-xp: Add SPL support used to include the DDR training code
This patch adds SPL support to the Marvell Armada-XP. With this addition
the bin_hdr integration is not needed any more. The SPL will first
initialize the serdes/PHY and the call the DDR setup and training code
now integrated into mainline U-Boot.
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
Stefan Roese [Mon, 19 Jan 2015 10:33:43 +0000 (11:33 +0100)]
scripts/Makefile.spl: Add MVEBU DDR code to SPL
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
Stefan Roese [Mon, 19 Jan 2015 10:33:44 +0000 (11:33 +0100)]
tools: kwbimage: Support u-boot.img padding to CONFIG_SYS_SPI_U_BOOT_OFFS
This is used on the AXP boards, to pad u-boot.img to the desired offset in
SPI flash (only this boot target supported right now). This offset is
used by the SPL then to load u-boot.img into SDRAM and execute it there.
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
Stefan Roese [Mon, 19 Jan 2015 10:33:45 +0000 (11:33 +0100)]
Makefile: Add another kwb build target used on Marvell Armada-XP (AXP)
This build target now includes the SPL binary as the bin_hdr into the
kwb image. Its used on the AXP port with the mainlined DDR training code.
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
Stefan Roese [Mon, 19 Jan 2015 10:33:46 +0000 (11:33 +0100)]
arm: db-mv784mp-gp: Enable SPL to include DDR training code into U-Boot
This patch adds SPL support to the db-mv784mp-gp eval board.
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
Stefan Roese [Mon, 19 Jan 2015 10:33:47 +0000 (11:33 +0100)]
arm: maxbcm: Enable SPL to include DDR training code into U-Boot
This patch adds SPL support to the maxbcm MV78460 based board. Including
the fixed DDR configuratrion needed for the DDR training code. And the
the serdes PHY init code.
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
Stefan Roese [Mon, 19 Jan 2015 10:33:48 +0000 (11:33 +0100)]
arm: mvebu: Placeholder bin_hdr file can now be removed
With this patchset the Marvell bin_hdr (DDR training) code is intergrated
into mainline U-Boot. We can remove the placeholder file again, which was
only introduced to make U-Boot compile and link again.
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
Stefan Roese [Mon, 19 Jan 2015 10:33:49 +0000 (11:33 +0100)]
arm: armada-xp: Change built target to include the SPL binary as bin_hdr
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
DrEagle [Wed, 17 Dec 2014 14:02:48 +0000 (15:02 +0100)]
kirkwood: sheevaplug: add FDT support
LIBFDT feature is required to support new kernels.
Signed-off-by: Gérald Kerma <drEagle@doukki.net>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
DrEagle [Wed, 17 Dec 2014 14:02:45 +0000 (15:02 +0100)]
kirkwood: sheevaplug: fix multiple defines
Signed-off-by: Gérald Kerma <drEagle@doukki.net>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
DrEagle [Wed, 17 Dec 2014 14:02:44 +0000 (15:02 +0100)]
kirkwood: sheevaplug: fix style
Signed-off-by: Gérald Kerma <drEagle@doukki.net>
Reviewed-by: Luka Perkov <luka.perkov@sartura.hr>
Masahiro Yamada [Thu, 5 Feb 2015 11:56:24 +0000 (20:56 +0900)]
ARM: UniPhier: leave the last element of boot_device_table empty
Checking if the pointer is NULL would be easier to know the tail
of the boot_device_table[] array.
For clarification, add the /* sentinel */ comment.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Masahiro Yamada [Thu, 5 Feb 2015 11:56:23 +0000 (20:56 +0900)]
ARM: UniPhier: refactor pinmon command
The return value of get_boot_mode_sel() is used as the index of
the boot_device_table[] array. Its type should be "int" rather
than "u32".
Use only the iterator "i" for the loop in do_pinmon().
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Masahiro Yamada [Thu, 5 Feb 2015 05:43:00 +0000 (14:43 +0900)]
ARM: UniPhier: enable I2C input pins for PH1-sLD8
To use I2C controllers on PH1-sLD8, the bit 10 (SCL0/SDA0)
and bit 11 (SCL1/SDA1) of IECTRL register must be set.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Masahiro Yamada [Thu, 5 Feb 2015 05:42:58 +0000 (14:42 +0900)]
ARM: UniPhier: do not compile unnecessary objects
It is true that unused functions are removed from the ELF image
by the compiler's garbage collection but relying on it too much
does not look nice.
Currently, the build is taking more than it should.
Refactor the makefiles to compile only files that are really needed.
CONFIG_SOC_INIT and CONFIG_DRAM_INIT are no longer needed by the
optimization.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Masahiro Yamada [Thu, 5 Feb 2015 05:42:57 +0000 (14:42 +0900)]
ARM: UniPhier: remove unused checkboard() functions
Since commit
0365ffcc0bd6 (generic-board: show model name in
board_init_f() too), checkboard() is invoked only when
show_board_info() fails to get the model name from Device Tree.
It never happens because UniPhier SoCs now only work with
CONFIG_OF_CONTROL and all the root nodes of UniPhier device trees
have the "model" property.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Masahiro Yamada [Thu, 5 Feb 2015 05:42:56 +0000 (14:42 +0900)]
ARM: UniPhier: revive support card info
Since commit
0365ffcc0bd6 (generic-board: show model name in
board_init_f() too), the support card information has not been
displayed because check_support_card() is invoked only when
show_board_info() fails to get the model name from Device Tree.
This commit adds misc_init_f() function to call check_support_card()
from there.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Masahiro Yamada [Thu, 5 Feb 2015 05:42:55 +0000 (14:42 +0900)]
ARM: UniPhier: move SPL init functions to spl_board_init()
Now init functions called from board_postclk_init() and dram_init()
are only necessary for SPL.
Move them to spl_board_init() for clean-up.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Masahiro Yamada [Thu, 5 Feb 2015 05:42:54 +0000 (14:42 +0900)]
ARM: UniPhier: move pin_init() to board_early_init_f()
Currently, I/O pin settings are not necessary for SPL.
The board_early_init_f() seems a suitable place to call pin_init().
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Masahiro Yamada [Thu, 5 Feb 2015 05:30:26 +0000 (14:30 +0900)]
ARM: UniPhier: set I2C offset length of on-board EEPROM in DTS
The EEPROM chips on UniPhier reference daughter boards expect 2-byte
offset address.
Since
7132b9fd68a1 (dm: i2c: dts: Support an offset-len device tree
property), I2C sub-nodes can have "u-boot,i2c-offset-len" property.
It is convenient to set the default I2C offset address length in
Device Tree, so that we do not have to set it on the command line.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Masahiro Yamada [Thu, 5 Feb 2015 05:30:25 +0000 (14:30 +0900)]
ARM: UniPhier: move EEPROM device node into a separate DTS
This EEPROM chip is installed on the expansion board commonly used
on UniPhier platform. To avoid duplicated description, move the
EEPROM node to a separate file and include it from other device tree
sources.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Masahiro Yamada [Thu, 5 Feb 2015 05:30:24 +0000 (14:30 +0900)]
MAINTAINERS: claim maintainership of files with "uniphier" pattern
The pattern "N: uniphier" can cover
- drivers/serial/serial_uniphier.c
- drivers/i2c/i2c-uniphier.c
- drivers/i2c/i2c-uniphier-f.c
- arch/arm/dts/uniphier-*
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Masahiro Yamada [Thu, 5 Feb 2015 05:30:23 +0000 (14:30 +0900)]
ARM: UniPhier: add a simple README file for UniPhier platform
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Masahiro Yamada [Thu, 5 Feb 2015 05:30:22 +0000 (14:30 +0900)]
ARM: UniPhier: add environment variable to update images in NAND
To boot UniPhier boards with the NAND boot mode, two images
(u-boot-spl.bin and u-boot-dtb.img) must be written at the correct
offset addresses.
TFTP downloading is useful to update such images in the NAND device.
We generally do:
=> nand erase 0 0x100000
=> tftpboot u-boot-spl.bin
=> nand write $loadaddr 0 0x10000
=> tftpboot u-boot-dtb.img
=> nand write $loadaddr 0x10000 0xf0000
It is a tedious and error-prone operation.
This commit provides the shorthand:
=> run nandupdate
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Masahiro Yamada [Thu, 5 Feb 2015 05:30:21 +0000 (14:30 +0900)]
ARM: UniPhier: use "&&" instead of "; " in commands
Run the next command only when the previous one succeeded.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Masahiro Yamada [Tue, 3 Feb 2015 04:51:36 +0000 (13:51 +0900)]
ARM: UniPhier: remove dummy gpio.h
This dummy header was introduced by commit
630bf80ebb34 (ARM:
UniPhier: add dummy gpio.h to enable CONFIG_OF_CONTROL).
Thanks to commit
a08d643dbd85 (dm: Drop gpio.h header from
fdtdec.c), such an ugly workaround is no longer needed.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Tom Rini [Wed, 4 Feb 2015 18:30:00 +0000 (13:30 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-ubi
Tom Rini [Mon, 2 Feb 2015 17:39:29 +0000 (12:39 -0500)]
Prepare v2015.04-rc1
Signed-off-by: Tom Rini <trini@ti.com>
Tom Rini [Mon, 2 Feb 2015 17:37:34 +0000 (12:37 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-ti
Tom Rini [Mon, 2 Feb 2015 16:51:58 +0000 (11:51 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-blackfin
Tom Rini [Mon, 2 Feb 2015 15:11:44 +0000 (10:11 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-sunxi
Siarhei Siamashka [Sat, 31 Jan 2015 22:42:14 +0000 (00:42 +0200)]
sunxi: mmc: Add 'sunxi_' prefix to the static functions
This results in a much more readable callgraph, because now they
can't be confused with the function having exactly the same name
in the generic mmc code.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Siarhei Siamashka [Sat, 31 Jan 2015 22:27:06 +0000 (00:27 +0200)]
sunxi: dram: Support more sun[457]i dram parameters in Kconfig
This patch allows to configure all the important DRAM parameters in Kconfig.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Siarhei Siamashka [Sat, 31 Jan 2015 22:27:05 +0000 (00:27 +0200)]
sunxi: dram: Optionally use standard JEDEC timings for sun[457]i
In addition to the current Android magic settings, allow to optionally use
DDR3 timing parameters, which are tailored for different clock frequencies
and JEDEC speed bins. This should improve reliability and performance.
Adding '+S:CONFIG_DRAM_TIMINGS_DDR3_1066F_1333H=y' to the board defconfig
allows to use timings, which are calculated for the DDR3-1066F speed bin.
A lot of DDR3 chips, which are used in real Allwinner based devices,
support DDR3-1066F speed bin timings.
And adding '+S:CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y' should work
with any DDR3 chips, because this targets the slowest JEDEC speed bins.
The vendor magic values are still used by default for DRAM, but board
maintainers now have more flexibility in DRAM timings selection.
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Sun, 25 Jan 2015 14:33:07 +0000 (15:33 +0100)]
sunxi: video: Force h/vsync active high when using ext. vga dac on some boards
On both my A13-OLinuxIno and my A13-OLinuxIno-Micro, the vga output gives an
unstable image when active low v or hsync is used.
The problem seems to be specific to the OLinuxIno A13 (normal & micro)
boards. I've just looked up the schematics and they use an opendrain driver
for the vga sync lines, and with sync pulses it is the logical high->low
edge of the pulse which counts for the timing, which with an active low
sync is being driven by the pull-up, and that simply seems to not drive
it hard enough to get a stable image.
So force v and hsync active high on these boards. independent of what the
modeline says. This fixes the unstable image.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Michal Suchanek [Sun, 4 Jan 2015 20:06:21 +0000 (21:06 +0100)]
sunxi: Add Inet 86VS support
Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Paul Kocialkowski [Tue, 27 Jan 2015 18:58:46 +0000 (19:58 +0100)]
sunxi: TZX-Q8-713B7 support
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Adam Sampson [Sun, 1 Feb 2015 12:58:58 +0000 (12:58 +0000)]
sunxi: Add Linksprite_pcDuino3_Nano board / defconfig
This is a low-cost Allwinner A20 board with Arduino-style GPIO headers;
it features 1G RAM, 4G NAND flash, 1 micro-SD, 2 USB sockets, 1 micro
USB socket for OTG and another for power in, HDMI, SATA, 5V power for
SATA devices, gigabit Ethernet, an IR receiver, 3.5mm audio out and a
MIPI camera connector.
Like the BananaPi, this board needs GMAC_TX_DELAY set to 3 in order for
GMAC to work reliably at gigabit speeds.
For more details, see: http://linux-sunxi.org/LinkSprite_pcDuino3_Nano
Signed-off-by: Adam Sampson <ats@offog.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Wed, 28 Jan 2015 08:31:52 +0000 (09:31 +0100)]
sunxi: MAINTAINERS: sort entries alphabetically
Keep all entries except for the monster entry at the top alphabetically sorted.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Mon, 26 Jan 2015 15:59:12 +0000 (16:59 +0100)]
sunxi: rsb: Move rsb_set_device_mode() call to rsb_init()
It turns out that the device_mode_data is rsb specific, rather then slave
specific, so integrate the rsb_set_device_mode() call into rsb_init().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Hans de Goede [Mon, 26 Jan 2015 15:46:43 +0000 (16:46 +0100)]
sunxi: rsb: Add sun9i (A80 support)
Add support for the A80 to the rsb code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Hans de Goede [Sun, 25 Jan 2015 11:15:14 +0000 (12:15 +0100)]
sunxi: Remove CONFIG_TARGET_FOO for sun5i and sun7i boards
CONFIG_TARGET_FOO was only used in board/sunxi/Makefile to select the
dram config for sun5i and sun7i boards and in board/sunxi/gmac.c for some
special handling of the bananapi/bananapro (both sun7i), all sun5i and sun7i
boards have been moved over to using a single dram_sun5i_autoconfig file,
and the tx clk delay handling for the Banana boards now has its own Kconfig.
IOW nothing is using CONFIG_TARGET_FOO anymore, so remove it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Hans de Goede [Sun, 25 Jan 2015 11:10:48 +0000 (12:10 +0100)]
sunxi: Add a GMAC Transmit Clock Delay Chain Kconfig option
And use this to set the GMAC Transmit Clock Delay Chain value on Banana
boards, rather then keying of CONFIG_TARGET_FOO.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Hans de Goede [Sun, 25 Jan 2015 10:29:27 +0000 (11:29 +0100)]
sunxi: Convert sun5i boards to use auto dram configuration
Currently we've separate detailed dram settings for all sun5i boards, this
moves them over to using auto dram configuration so that we can get rid of
all the per board dram_foo.c files.
This has been tested on a A10s-Olinuxino, A13-Olinuxino, A13-OlinuxinoM,
mk802-a10s and r7-tv-dongle board.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Hans de Goede [Fri, 23 Jan 2015 15:40:01 +0000 (16:40 +0100)]
sunxi: Hyundai_A7HD_defconfig fix USB vbus pin config
USB1_VBUS is not used, and USB2_VBUS uses the pin normally used to control
USB1_VBUS.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Fri, 23 Jan 2015 14:28:22 +0000 (15:28 +0100)]
sunxi: Only enable i2c support in the SPL when needed
We do not need i2c support in the SPL when there is no PMIC (some sun4i
boards), or when the PMIC is not using i2c such as on sun6i and sun8i.
This reduces the SPL size from (e.g.) 21812 to 19260 bytes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Tom Rini [Sat, 31 Jan 2015 17:40:48 +0000 (12:40 -0500)]
Merge branch 'patman' of git://git.denx.de/u-boot-x86
Tom Rini [Sat, 31 Jan 2015 17:40:26 +0000 (12:40 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-net
Simon Glass [Sat, 4 Oct 2014 02:40:36 +0000 (20:40 -0600)]
patman: Explain how to make doc/git-mailrc work
Add an explanation for how to set up git so that patman can find the alias
file. Fix up the get_maintainers message too.
Reported-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Tue, 23 Sep 2014 19:05:59 +0000 (13:05 -0600)]
sandbox: Fix README to indicate that vendor name is unset
This brings in a additional small fix which was missed in a recent update
to the README.
Suggested-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
Scott Wood [Thu, 25 Sep 2014 19:30:46 +0000 (14:30 -0500)]
patman: Check commit_match before stripping leading whitespace
True commit lines start at column zero. Anything that is indented
is part of the commit message instead. I noticed this by trying to
run buildman with commit
e3a4facdfc07179ebe017a07b8de6224a935a9f3
as master, which contained a reference to a Linux commit inside
the commit message. ProcessLine saw that as a genuite commit
line, and thus buildman tried to build it, and died with an
exception because that SHA is not present in the U-Boot tree.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Simon Glass <sjg@chromium.org>
Peter Tyser [Mon, 26 Jan 2015 17:42:21 +0000 (11:42 -0600)]
patman: Make dry-run output match real functionality
When run with the --dry-run argument patman prints out information
showing what it would do. This information currently doesn't line up
with what patman/git send-email really do. Some basic examples:
- If an email address is addressed via "Series-cc" and "Patch-cc" patman
shows that email address would be CC-ed two times.
- If an email address is addressed via "Series-to" and "Patch-cc" patman
shows that email address would be sent TO and CC-ed.
- If an email address is addressed from a combination of tag aliases,
get_maintainer.pl output, "Series-cc", "Patch-cc", etc patman shows
that the email address would be CC-ed multiple times.
Patman currently does try to send duplicate emails like the --dry-run
output shows, but "git send-email" intelligently removes duplicate
addresses so this patch shouldn't change the non-dry-run functionality.
Change patman's output and email addressing to line up with the
"git send-email" logic. This trims down patman's dry-run output and
prevents confusion about what patman will do when emails are actually
sent.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Simon Glass [Tue, 20 Jan 2015 03:21:34 +0000 (20:21 -0700)]
sandbox: Add a -D option to use a default device tree
It is painful to specify the full path to the device tree with the -d
option. It is normally kept in the same directory as U-Boot, so provide
an option to use this by default.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Tue, 20 Jan 2015 03:21:33 +0000 (20:21 -0700)]
sandbox: Correct cros-ec keyboard definition
The other boards got updated to the standard binding. Update sandbox as
well.
Signed-off-by: Simon Glass <sjg@chromium.org>
Alexey Brodkin [Tue, 13 Jan 2015 14:10:24 +0000 (17:10 +0300)]
net/designware: add error message on DMA reset timeout
If for some reason DMA module fails to reset user oserves only this:
--->---
# dhcp
Trying dwmac.
e0018000
FAIL
--->---
This message makes not much sense.
With proposed change error message will be more helpful:
--->---
# dhcp
Trying dwmac.
e0018000
DMA reset timeout
FAIL
--->---
For example user may do power toggle to recover board functionality.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Pavel Machek <pavel@denx.de>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Ian Campbell <ijc@hellion.org.uk>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@ti.com>
Acked-by: Pavel Machek <pavel@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Philippe De Muyter [Wed, 19 Feb 2014 16:21:59 +0000 (17:21 +0100)]
net: phy: micrel: add support for KSZ8895 switch in SMI mode
This patch adds a phy driver for the Micrel KSZ8895 switch. As the SoC MAC
is directly connected to the switch MAC the link to the switch is always up.
But the KSZ8895 switch can be hardwired in three configuration modes :
- not configurable with eventually an eeprom-stored configuration
- configurable by the mdio/mdc connection (SMI protocol)
- configurable by a SPI connection.
In not configurable mode, the switch starts automatically, but in the
other modes, it must be started programmatically, by writing 1 in
configuration register 1.
We only support the not configurable and mdio/mdc (aka SMI) modes here.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Yoshinori Sato [Thu, 13 Feb 2014 14:13:41 +0000 (23:13 +0900)]
Add MS7206SE ethernet support
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Claudiu Manoil [Tue, 10 Dec 2013 13:21:04 +0000 (15:21 +0200)]
net: tsec: Fix NULL access in case init_phy() fails
If the PHY is not recognized don't access phydev (NULL)
and return 0 to signal failure.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Tom Rini [Fri, 30 Jan 2015 18:56:15 +0000 (13:56 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-mips
Tom Rini [Fri, 30 Jan 2015 14:24:42 +0000 (09:24 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-dm
Peng Fan [Thu, 29 Jan 2015 10:03:39 +0000 (18:03 +0800)]
ARM: armv7 fix spelling of SCTRL
SCTLR is the abbreviation of System Control Register, so we should
use SCTLR but not SCTRL.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Michal Simek [Mon, 26 Jan 2015 07:52:27 +0000 (08:52 +0100)]
fpga: Extend dump description
There are missing parameters in help which fpga dump command
requires.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Linus Walleij [Fri, 23 Jan 2015 13:41:10 +0000 (14:41 +0100)]
vexpress64: support the Juno Development Platform
The Juno Development Platform is a physical Versatile Express
device with some differences from the emulated semihosting
models. The main difference is that the system is split in
a SoC and an FPGA where the SoC hosts the serial ports at
totally different adresses.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Fri, 23 Jan 2015 10:50:53 +0000 (11:50 +0100)]
vexpress64: get rid of CONFIG_SYS_EXTRA_OPTIONS
The Versatile Express ARMv8 semihosted FVP platform is still
using the legacy CONFIG_SYS_EXTRA_OPTIONS method to configure
some compile-time flags. Get rid of this and create a Kconfig
entry for the FVP model, and a selectable bool for the
semihosting library.
The FVP subboard is now modeled as a target choice so we can
eventually choose between different ARMv8 versatile express
boards (FVP, base model, Juno...) this way. All dependent
symbols are updated to reflect this.
The 64bit Versatile Express board symbols are renamed
VEXPRESS64 so we have some chance to see what is actually
going on. Tested on the FVP fast model.
Acked-by: Steve Rae <srae@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Dennis Gilmore [Thu, 22 Jan 2015 18:34:20 +0000 (11:34 -0700)]
add README.distro file
Add documentation on how to setup a system to use the generic distro
configs and boot commands. This spells out what is needed to make a
system conformant, but does not limit the board to only the defaults.
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
[swarren, added concept, user config, BOOT_TARGET_DEVICES sections.
edited the rest]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Minghuan Lian [Thu, 22 Jan 2015 05:21:55 +0000 (13:21 +0800)]
drivers/pci/pci_rom.c: fix compile warning under 64bit mode
Fix this:
drivers/pci/pci_rom.c:95:15: warning: cast to pointer from
integer of different size [-Wint-to-pointer-cast]
rom_header = (struct pci_rom_header *)rom_address;
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Minghuan Lian [Thu, 22 Jan 2015 05:21:54 +0000 (13:21 +0800)]
drivers/net/e1000.c: fix compile warning under 64bit mode
Fix this:
warning: cast from pointer to integer of different size
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Chris Kuethe [Thu, 22 Jan 2015 04:52:33 +0000 (20:52 -0800)]
arm: switch armltd vexpress to GENERIC_BOARD
only tested tested under QEMU with vexpress_ca9x4 ("-M vexpress-a9") and
vexpress_ca15_tc2 ("-M vexpress-a15"). Makes the ugly warning go away.
Signed-off-by: Chris Kuethe <chris.kuethe+github@gmail.com>
Stephen Warren [Mon, 19 Jan 2015 23:39:11 +0000 (16:39 -0700)]
distro_bootcmd: read DHCP boot script name from a variable
Modify $bootcmd_dhcp to read the downloaded script filename from an
environment variable rather than hard-coding it. This allows the user
(or another script) to select a different script name if they want,
without editing the whole value of $bootcmd_dhcp.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Bin Meng [Mon, 19 Jan 2015 13:32:00 +0000 (21:32 +0800)]
cmd: Fix gettime command help
Remove the additional ',' and '\n' from the gettime command help.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Daniel Schwierzeck [Thu, 29 Jan 2015 13:56:20 +0000 (14:56 +0100)]
MIPS: unify CPU code in arch/mips/cpu/
Unify and move code in arch/mips/cpu/mips[32|64]/ to arch/mips/cpu/.
The CPU specific config.mk files need to remain until
CONFIG_STANDALONE_LOAD_ADDR is converted to a global Kconfig symbol.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Daniel Schwierzeck [Thu, 29 Jan 2015 13:47:01 +0000 (14:47 +0100)]
MIPS: move au1x00 SoC code to arch/mips/mach-au1x00
Move all au1x00 code out of arch/mips/cpu/mips32 to allow
unification of CPU code in a later patch. The reorganization
of the SoC specific header files will be done in a later patch
series.
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Paul Burton [Thu, 29 Jan 2015 10:04:10 +0000 (10:04 +0000)]
MIPS: handle mips64 ST0_KX bit in mips32 start.S
In preparation for sharing a single copy of start.S between mips32 &
mips64, handle setting the KX bit of the cop0 Status register when the
mips32 start.S is built for mips64.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Paul Burton [Thu, 29 Jan 2015 10:04:09 +0000 (10:04 +0000)]
MIPS: handle mips64 relocs in mips32 start.S
In preparation for sharing a single copy of start.S between mips32 &
mips64, handle mips64 relocations in the mips32 start.S when built for
mips64.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Paul Burton [Thu, 29 Jan 2015 10:04:08 +0000 (10:04 +0000)]
MIPS: use asm.h macros in mips32 start.S
Where the mips32 & mips64 implementations of start.S differ in terms of
access sizes & offsets, use the appropriate macros from asm.h to
abstract those differences away. This is in preparation for sharing a
single copy of start.S between mips32 & mips64.
The exception to this is loads of immediates to be written to the cop0
Config register, which is a 32bit register on mips64 and therefore
constants written to it can be loaded as such.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Simon Glass [Tue, 27 Jan 2015 03:29:40 +0000 (20:29 -0700)]
dm: cros_ec: Convert cros_ec_i2c over to driver model
Move this driver to use driver model and update the snow configuration to
match.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Tue, 27 Jan 2015 03:29:39 +0000 (20:29 -0700)]
dm: i2c: Add two more I2C init functions to the compatibility layer
These functions are useful in case the board calls them. Also fix a missing
parameter caused by applying the wrong patch (actually I failed to send v2
and applied v1 by mistake).
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Tue, 27 Jan 2015 03:29:38 +0000 (20:29 -0700)]
dm: exynos: dts: Set the offset length for cros_ec
The EC has no concept of offset, so use a value of 0.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Tue, 27 Jan 2015 03:29:37 +0000 (20:29 -0700)]
dm: i2c: dts: Support an offset-len device tree property
Since U-Boot can support different offset lengths (0-4 bytes), add a device
tree property to specify this. This avoids hard-coding it in the driver.
Signed-off-by: Simon Glass <sjg@chromium.org>
Przemyslaw Marczak [Tue, 27 Jan 2015 12:36:39 +0000 (13:36 +0100)]
exynos5: enable dm i2c
This patch enables CONFIG_DM_I2C and also CONFIG_DM_I2C_COMPAT.
The last one should be removed when all the i2c peripheral
drivers will use dm i2c framework.
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Cc: Akshay Saraswat <akshay.s@samsung.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Przemyslaw Marczak [Tue, 27 Jan 2015 12:36:38 +0000 (13:36 +0100)]
odroid u3: enable dm i2c support
This patch enables CONFIG_DM_I2C and also CONFIG_DM_I2C_COMPAT.
The last one should be removed when the dm pmic framework will
be finished.
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Przemyslaw Marczak [Tue, 27 Jan 2015 12:36:37 +0000 (13:36 +0100)]
odroid u3: dts: add missing i2c aliases
This change fixes i2c bus numbering for Odroid U3.
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Cc: Minkyu Kang <mk7.kang@samsung.com>