arm64: dts: qcom: msm8916-samsung-a5u: Fix iris compatible

[ Upstream commit 826e6faf49ae1eb065759a30832a2e34740bd8b1 ]

Unlike most MSM8916 boards, samsung-a5u uses WCN3660B instead of
WCN3620 to support the 5 GHz band additionally.

WCN3660B has similar requirements as WCN3620, but it needs the XO
clock to run at 48 MHz instead of 19.2 MHz. So far it was possible
to describe that configuration using the qcom,wcn3680 compatible.

However, as of commit 8490987bdb9a ("wcn36xx: Hook and identify RF_IRIS_WCN3680"),
the wcn36xx driver will now use the qcom,wcn3680 compatible
to enable functionality specific to WCN3680. In particular,
WCN3680 supports 802.11ac, which is not available in WCN3660B.

Use the new qcom,wcn3660b compatible to describe the chip properly.

Fixes: 0d7051999175 ("arm64: dts: msm8916-samsung-a5u: Override iris compatible")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210106102134.59801-4-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: vchiq: Fix bulk transfers on 64-bit builds

[ Upstream commit 88753cc19f087abe0d39644b844e67a59cfb5a3d ]

The recent change to the bulk transfer compat function missed the fact
the relevant ioctl command is VCHIQ_IOC_QUEUE_BULK_TRANSMIT32, not
VCHIQ_IOC_QUEUE_BULK_TRANSMIT, as any attempt to send a bulk block
to the VPU would have shown.

Fixes: a4367cd2b231 ("staging: vchiq: convert compat bulk transfer")
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/20210105162030.1415213-3-phil@raspberrypi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: vchiq: Fix bulk userdata handling

[ Upstream commit 96ae327678eceabf455b11a88ba14ad540d4b046 ]

The addition of the local 'userdata' pointer to
vchiq_irq_queue_bulk_tx_rx omitted the case where neither BLOCKING nor
WAITING modes are used, in which case the value provided by the
caller is not returned to them as expected, but instead it is replaced
with a NULL. This lack of a suitable context may cause the application
to crash or otherwise malfunction.

Fixes: 4184da4f316a ("staging: vchiq: fix __user annotations")
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/20210105162030.1415213-2-phil@raspberrypi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_qca: Fix memleak in qca_controller_memdump

[ Upstream commit 71f8e707557b9bc25dc90a59a752528d4e7c1cbf ]

When __le32_to_cpu() fails, qca_memdump should be freed
just like when vmalloc() fails.

Fixes: d841502c79e3f ("Bluetooth: hci_qca: Collect controller memory dump during SSR")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: mtk-smi: Fix PM usage counter unbalance in mtk_smi ops

[ Upstream commit a2d522ff0f5cc26915c4ccee9457fd4b4e1edc48 ]

pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced.

Fixes: 4f0a1a1ae3519 ("memory: mtk-smi: Invoke pm runtime_callback to enable clocks")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20201123102118.3866195-1-zhangqilong3@huawei.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: exynos: correct PMIC interrupt trigger level on Espresso

[ Upstream commit 1fea2eb2f5bbd3fbbe2513d2386b5f6e6db17fd7 ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: 9589f7721e16 ("arm64: dts: Add S2MPS15 PMIC node on exynos7-espresso")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212903.216728-8-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: exynos: correct PMIC interrupt trigger level on TM2

[ Upstream commit e98e2367dfb4b6d7a80c8ce795c644124eff5f36 ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: 01e5d2352152 ("arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201210212903.216728-7-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid XU3 family

[ Upstream commit 3e7d9a583a24f7582c6bc29a0d4d624feedbc2f9 ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  The falling edge
interrupt will mostly work but it's not correct.

Fixes: aac4e0615341 ("ARM: dts: odroidxu3: Enable wake alarm of S2MPS11 RTC")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201210212903.216728-6-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Arndale Octa

[ Upstream commit 1ac8893c4fa3d4a34915dc5cdab568a39db5086c ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  The falling edge
interrupt will mostly work but it's not correct.

Fixes: 1fed2252713e ("ARM: dts: fix pinctrl for s2mps11-irq on exynos5420-arndale-octa")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201210212903.216728-5-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Spring

[ Upstream commit 77e6a5467cb8657cf8b5e610a30a4c502085e4f9 ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: 53dd4138bb0a ("ARM: dts: Add exynos5250-spring device tree")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212903.216728-4-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Rinato

[ Upstream commit 437ae60947716bb479e2f32466f49445c0509b1e ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: faaf348ef468 ("ARM: dts: Add board dts file for exynos3250-rinato")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201210212903.216728-3-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Monk

[ Upstream commit 8528cda2b7c667e9cd173aef1a677c71b7d5a096 ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: e0cefb3f79d3 ("ARM: dts: add board dts file for Exynos3250-based Monk board")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212903.216728-2-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Artik 5

[ Upstream commit cb31334687db31c691901269d65074a7ffaecb18 ]

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: b004a34bd0ff ("ARM: dts: exynos: Add exynos3250-artik5 dtsi file for ARTIK5 module")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201210212903.216728-1-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: beacon: Fix audio-1.8V pin enable

[ Upstream commit 5a5da0b758b327b727c5392d7f11e046e113a195 ]

The fact the audio worked at all was a coincidence because the wrong
gpio enable was used.  Use the correct GPIO pin to ensure its operation.

Fixes: a1d8a344f1ca ("arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20201213183759.223246-6-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: beacon kit: Fix choppy Bluetooth Audio

[ Upstream commit db030c5a9658846a42fbed4d43a8b5f28a2d7ab7 ]

The Bluetooth chip is capable of operating at 4Mbps, but the
max-speed setting was on the UART node instead of the Bluetooth
node, so the chip didn't operate at the correct speed resulting
in choppy audio.  Fix this by setting the max-speed in the proper
node.

Fixes: a1d8a344f1ca ("arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20201213183759.223246-3-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Fix initializing response id after clearing struct

[ Upstream commit a5687c644015a097304a2e47476c0ecab2065734 ]

Looks like this was missed when patching the source to clear the structures
throughout, causing this one instance to clear the struct after the response
id is assigned.

Fixes: eddb7732119d ("Bluetooth: A2MP: Fix not initializing all members")
Signed-off-by: Christopher William Snowhill <chris@kode54.net>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_uart: Fix a race for write_work scheduling

[ Upstream commit afe0b1c86458f121b085271e4f3034017a90d4a3 ]

In hci_uart_write_work, there is a loop/goto checking the value of
HCI_UART_TX_WAKEUP. If HCI_UART_TX_WAKEUP is set again, it keeps trying
hci_uart_dequeue; otherwise, it clears HCI_UART_SENDING and returns.

In hci_uart_tx_wakeup, if HCI_UART_SENDING is already set, it sets
HCI_UART_TX_WAKEUP, skips schedule_work and assumes the running/pending
hci_uart_write_work worker will do hci_uart_dequeue properly.

However, if the HCI_UART_SENDING check in hci_uart_tx_wakeup is done after
the loop breaks, but before HCI_UART_SENDING is cleared in
hci_uart_write_work, the schedule_work is skipped incorrectly.

Fix this race by changing the order of HCI_UART_SENDING and
HCI_UART_TX_WAKEUP modification.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Fixes: 82f5169bf3d3 ("Bluetooth: hci_uart: add serdev driver support library")
Signed-off-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btqcomsmd: Fix a resource leak in error handling paths in the probe function

[ Upstream commit 9a39a927be01d89e53f04304ab99a8761e08910d ]

Some resource should be released in the error handling path of the probe
function, as already done in the remove function.

The remove function was fixed in commit 5052de8deff5 ("soc: qcom: smd:
Transition client drivers from smd to rpmsg")

Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: Fix error handling in case of CE pipe init failure

[ Upstream commit 31561e8557cd1eeba5806ac9ce820f8323b2201b ]

Currently if the copy engine pipe init fails for snoc based
chipsets, the rri is not freed.

Fix this error handling for copy engine pipe init
failure.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1

Fixes: 4945af5b264f ("ath10k: enable SRRI/DRRI support on ddr for WCN3990")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607713210-18320-1-git-send-email-pillair@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/gt: One more flush for Baytrail clear residuals

commit e627d5923cae93fa4188f4c4afba6486169a1337 upstream.

CI reports that Baytail requires one more invalidate after CACHE_MODE
for it to be happy.

Fixes: ace44e13e577 ("drm/i915/gt: Clear CACHE_MODE prior to clearing residuals")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Diego Calleja <diegocg@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119110802.22228-1-chris@chris-wilson.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Don't call sync_stop if it hasn't been stopped

commit 700cb70730777c159a988e01daa93f20a1ae9b58 upstream.

The PCM stop operation sets the stop_operating flag for indicating the
sync_stop post-process.  This flag is, however, set unconditionally
even if the PCM trigger weren't issued.  This may lead to
inconsistency in the driver side.

Correct the code to set stop_operating flag only after the trigger
STOP is actually called.

Fixes: 1e850beea278 ("ALSA: pcm: Add the support for sync-stop operation")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210206203656.15959-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Assure sync with the pending stop operation at suspend

commit 2c87c1a49c9d113a9f3e8e951d7d64be5ff50ac1 upstream.

The current PCM code calls the sync_stop at the resume action due to
the analogy to the PCM prepare call pattern.  But, it makes little
sense, as the sync should have been done rather at the suspend time,
not at the resume time.

This patch corrects the sync_stop call at suspend/resume to assure the
sync before finishing the suspend.

Fixes: 1e850beea278 ("ALSA: pcm: Add the support for sync-stop operation")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210206203656.15959-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Call sync_stop at disconnection

commit 29bb274e94974669acb5186a75538f20df1508b6 upstream.

The PCM core should perform the sync for the pending stop operations
at disconnection.  Otherwise it may lead to unexpected access.

Currently the old user of sync_stop, USB-audio driver, has its own
sync, so this isn't needed, but it's better to guarantee the sync in
the PCM core level.

This patch adds the missing sync_stop call at PCM disconnection
callback.  It also assures the IRQ sync if it's specified in the
card.  snd_pcm_sync_stop() is slightly modified to be called also for
any PCM substream object now.

Fixes: 1e850beea278 ("ALSA: pcm: Add the support for sync-stop operation")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210206203656.15959-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

random: fix the RNDRESEEDCRNG ioctl

commit 11a0b5e0ec8c13bef06f7414f9e914506140d5cb upstream.

The RNDRESEEDCRNG ioctl reseeds the primary_crng from itself, which
doesn't make sense.  Reseed it from the input_pool instead.

Fixes: d848e5f8e1eb ("random: add new ioctl RNDRESEEDCRNG")
Cc: stable@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jann Horn <jannh@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210112192818.69921-1-ebiggers@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vmlinux.lds.h: Define SANTIZER_DISCARDS with CONFIG_GCOV_KERNEL=y

commit f5b6a74d9c08b19740ca056876bf6584acdba582 upstream.

clang produces .eh_frame sections when CONFIG_GCOV_KERNEL is enabled,
even when -fno-asynchronous-unwind-tables is in KBUILD_CFLAGS:

$ make CC=clang vmlinux
...
ld: warning: orphan section `.eh_frame' from `init/main.o' being placed in section `.eh_frame'
ld: warning: orphan section `.eh_frame' from `init/version.o' being placed in section `.eh_frame'
ld: warning: orphan section `.eh_frame' from `init/do_mounts.o' being placed in section `.eh_frame'
ld: warning: orphan section `.eh_frame' from `init/do_mounts_initrd.o' being placed in section `.eh_frame'
ld: warning: orphan section `.eh_frame' from `init/initramfs.o' being placed in section `.eh_frame'
ld: warning: orphan section `.eh_frame' from `init/calibrate.o' being placed in section `.eh_frame'
ld: warning: orphan section `.eh_frame' from `init/init_task.o' being placed in section `.eh_frame'
...

$ rg "GCOV_KERNEL|GCOV_PROFILE_ALL" .config
CONFIG_GCOV_KERNEL=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_GCOV_PROFILE_ALL=y

This was already handled for a couple of other options in
commit d812db78288d ("vmlinux.lds.h: Avoid KASAN and KCSAN's unwanted
sections") and there is an open LLVM bug for this issue. Take advantage
of that section for this config as well so that there are no more orphan
warnings.

Link: https://bugs.llvm.org/show_bug.cgi?id=46478
Link: https://github.com/ClangBuiltLinux/linux/issues/1069
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Fixes: d812db78288d ("vmlinux.lds.h: Avoid KASAN and KCSAN's unwanted sections")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210130004650.2682422-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: vmlinux.lds.S: add missing PAGE_ALIGNED_DATA() section

commit 8ac7c87acdcac156670f9920c8acbd84308ff4b1 upstream.

MIPS uses its own declaration of rwdata, and thus it should be kept
in sync with the asm-generic one. Currently PAGE_ALIGNED_DATA() is
missing from the linker script, which emits the following ld
warnings:

mips-alpine-linux-musl-ld: warning: orphan section
`.data..page_aligned' from `arch/mips/kernel/vdso.o' being placed
in section `.data..page_aligned'
mips-alpine-linux-musl-ld: warning: orphan section
`.data..page_aligned' from `arch/mips/vdso/vdso-image.o' being placed
in section `.data..page_aligned'

Add the necessary declaration, so the mentioned structures will be
placed in vmlinux as intended:

ffffffff80630580 D __end_once
ffffffff80630580 D __start___dyndbg
ffffffff80630580 D __start_once
ffffffff80630580 D __stop___dyndbg
ffffffff80634000 d mips_vdso_data
ffffffff80638000 d vdso_data
ffffffff80638580 D _gp
ffffffff8063c000 T __init_begin
ffffffff8063c000 D _edata
ffffffff8063c000 T _sinittext

->

ffffffff805a4000 D __end_init_task
ffffffff805a4000 D __nosave_begin
ffffffff805a4000 D __nosave_end
ffffffff805a4000 d mips_vdso_data
ffffffff805a8000 d vdso_data
ffffffff805ac000 D mmlist_lock
ffffffff805ac080 D tasklist_lock

Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: stable@vger.kernel.org # 4.4+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix PCM buffer allocation in non-vmalloc mode

commit fb3c293b82c31a9a68fbcf4e7a45fadd8a47ea2b upstream.

The commit f274baa49be6 ("ALSA: usb-audio: Allow non-vmalloc buffer
for PCM buffers") introduced the mode to allocate coherent pages for
PCM buffers, and it used bus->controller device as its DMA device.
It turned out, however, that bus->sysdev is a more appropriate device
to be used for DMA mapping in HCD code.

This patch corrects the device reference accordingly.

Note that, on most platforms, both point to the very same device,
hence this patch doesn't change anything practically.  But on
platforms like xhcd-plat hcd, the change becomes effective.

Fixes: f274baa49be6 ("ALSA: usb-audio: Allow non-vmalloc buffer for PCM buffers")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210205144559.29555-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bfq: Avoid false bfq queue merging

commit 41e76c85660c022c6bf5713bfb6c21e64a487cec upstream.

bfq_setup_cooperator() uses bfqd->in_serv_last_pos so detect whether it
makes sense to merge current bfq queue with the in-service queue.
However if the in-service queue is freshly scheduled and didn't dispatch
any requests yet, bfqd->in_serv_last_pos is stale and contains value
from the previously scheduled bfq queue which can thus result in a bogus
decision that the two queues should be merged. This bug can be observed
for example with the following fio jobfile:

[global]
direct=0
ioengine=sync
invalidate=1
size=1g
rw=read

[reader]
numjobs=4
directory=/mnt

where the 4 processes will end up in the one shared bfq queue although
they do IO to physically very distant files (for some reason I was able to
observe this only with slice_idle=1ms setting).

Fix the problem by invalidating bfqd->in_serv_last_pos when switching
in-service queue.

Fixes: 058fdecc6de7 ("block, bfq: fix in-service-queue check for queue merging")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virt: vbox: Do not use wait_event_interruptible when called from kernel context

commit c35901b39ddc20077f4ae7b9f7bf344487f62212 upstream.

Do not use wait_event_interruptible when vbg_hgcm_call() gets called from
kernel-context, such as it being called by the vboxsf filesystem code.

This fixes some filesystem related system calls on shared folders
unexpectedly failing with -EINTR.

Fixes: 0532a1b0d045 ("virt: vbox: Implement passing requestor info to the host for VirtualBox 6.0.x")
Reported-by: Ludovic Pouzenc <bugreports@pouzenc.fr>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210121150754.147598-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Decline to resize resources if boot config must be preserved

commit 729e3a669d1b62e9876a671ac03ccba399a23b68 upstream.

The _DSM #5 method in the ACPI host bridge object tells us whether the OS
must preserve the resource assignments done by firmware. If this is the
case, we should not permit drivers to resize BARs on the fly. Make
pci_resize_resource() take this into account.

Link: https://lore.kernel.org/r/20210109095353.13417-1-ardb@kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064

commit 2cfef1971aea6119ee27429181d6cb3383031ac2 upstream.

The use of PHY_REFCLK_USE_PAD introduced a regression for apq8064 devices.
It was tested that while apq doesn't require the padding, ipq SoC must use
it or the kernel hangs on boot.

Link: https://lore.kernel.org/r/20201019165555.8269-1-ansuelsmth@gmail.com
Fixes: de3c4bf64897 ("PCI: qcom: Add support for tx term offset for rev 2.1.0")
Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

w1: w1_therm: Fix conversion result for negative temperatures

commit 2f6055c26f1913763eabc66c7c27d0693561e966 upstream.

DS18B20 device driver returns an incorrect value for negative temperatures
due to a missing sign-extension in w1_DS18B20_convert_temp().

Fix by using s16 temperature value when converting to int.

Fixes: 9ace0b4dab1c (w1: w1_therm: Add support for GXCAS GX20MH01 device.)
Cc: stable <stable@vger.kernel.org>
Reported-by: Paweł Marciniak <sunwire@gmail.com>
Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru>
Link: https://lore.kernel.org/r/20210121093021.224764-1-ivan.zaentsev@wirenboard.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kdb: Make memory allocations more robust

commit 93f7a6d818deef69d0ba652d46bae6fbabbf365c upstream.

Currently kdb uses in_interrupt() to determine whether its library
code has been called from the kgdb trap handler or from a saner calling
context such as driver init. This approach is broken because
in_interrupt() alone isn't able to determine kgdb trap handler entry from
normal task context. This can happen during normal use of basic features
such as breakpoints and can also be trivially reproduced using:
echo g > /proc/sysrq-trigger

We can improve this by adding check for in_dbg_master() instead which
explicitly determines if we are running in debugger context.

Cc: stable@vger.kernel.org
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/1611313556-4004-1-git-send-email-sumit.garg@linaro.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix mailbox Ch erroneous error

commit 044c218b04503858ca4e17f61899c8baa0ae9ba1 upstream.

Mailbox Ch/dump ram extend expects mb register 10 to be set. If not
set/clear, firmware can pick up garbage from previous invocation of this
mailbox. Example: mctp dump can set mb10.  On subsequent flash read which
use mailbox cmd Ch, mb10 can retain previous value.

Link: https://lore.kernel.org/r/20210111093134.1206-6-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: libsas: docs: Remove notify_ha_event()

commit 3f901c81dfad6930de5d4e6b582c4fde880cdada upstream.

The ->notify_ha_event() hook has long been removed from the libsas event
interface.

Remove it from documentation.

Link: https://lore.kernel.org/r/20210118100955.1761652-2-a.darwish@linutronix.de
Fixes: 042ebd293b86 ("scsi: libsas: kill useless ha_event and do some cleanup")
Cc: stable@vger.kernel.org
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

debugfs: do not attempt to create a new file before the filesystem is initalized

commit 56348560d495d2501e87db559a61de717cd3ab02 upstream.

Some subsystems want to add debugfs files at early boot, way before
debugfs is initialized.  This seems to work somehow as the vfs layer
will not allow it to happen, but let's be explicit and test to ensure we
are properly up and running before allowing files to be created.

Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: stable <stable@vger.kernel.org>
Reported-by: Michael Walle <michael@walle.cc>
Reported-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210218100818.3622317-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

debugfs: be more robust at handling improper input in debugfs_lookup()

commit bc6de804d36b3709d54fa22bd128cbac91c11526 upstream.

debugfs_lookup() doesn't like it if it is passed an illegal name
pointer, or if the filesystem isn't even initialized yet.  If either of
these happen, it will crash the system, so fix it up by properly testing
for valid input and that we are up and running before trying to find a
file in the filesystem.

Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: stable <stable@vger.kernel.org>
Reported-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210218100818.3622317-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vdpa/mlx5: fix param validation in mlx5_vdpa_get_config()

commit dcfde1635e764fd69cc756c7780d144e288608e9 upstream.

It's legal to have 'offset + len' equal to
sizeof(struct virtio_net_config), since 'ndev->config' is a
'struct virtio_net_config', so we can safely copy its content under
this condition.

Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20210208161741.104939-1-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vmlinux.lds.h: add DWARF v5 sections

commit 3c4fa46b30c551b1df2fb1574a684f68bc22067c upstream.

We expect toolchains to produce these new debug info sections as part of
DWARF v5. Add explicit placements to prevent the linker warnings from
--orphan-section=warn.

Compilers may produce such sections with explicit -gdwarf-5, or based on
the implicit default version of DWARF when -g is used via DEBUG_INFO.
This implicit default changes over time, and has changed to DWARF v5
with GCC 11.

.debug_sup was mentioned in review, but without compilers producing it
today, let's wait to add it until it becomes necessary.

Cc: stable@vger.kernel.org
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1922707
Reported-by: Chris Murphy <lists@colorremedies.com>
Suggested-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Mark Wielaard <mark@klomp.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.19

Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Jason Self <jason@bluehome.net>
Tested-by: Ross Schmidt <ross.schm.dev@gmail.com>
Tested-by: Hulk Robot <hulkci@huawei.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/r/20210225092516.531932232@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts/recordmcount.pl: support big endian for ARCH sh

[ Upstream commit 93ca696376dd3d44b9e5eae835ffbc84772023ec ]

The kernel test robot reported the following issue:

    CC [M]  drivers/soc/litex/litex_soc_ctrl.o
  sh4-linux-objcopy: Unable to change endianness of input file(s)
  sh4-linux-ld: cannot find drivers/soc/litex/.tmp_gl_litex_soc_ctrl.o: No such file or directory
  sh4-linux-objcopy: 'drivers/soc/litex/.tmp_mx_litex_soc_ctrl.o': No such file

The problem is that the format of input file is elf32-shbig-linux, but
sh4-linux-objcopy wants to output a file which format is elf32-sh-linux:

  $ sh4-linux-objdump -d drivers/soc/litex/litex_soc_ctrl.o | grep format
  drivers/soc/litex/litex_soc_ctrl.o:     file format elf32-shbig-linux

Link: https://lkml.kernel.org/r/20210210150435.2171567-1-rong.a.chen@intel.com
Link: https://lore.kernel.org/linux-mm/202101261118.GbbYSlHu-lkp@intel.com
Signed-off-by: Rong Chen <rong.a.chen@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Cc: Rich Felker <dalias@libc.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: fix CONFIG_TRIM_UNUSED_KSYMS build for ppc64

[ Upstream commit 29500f15b54b63ad0ea60b58e85144262bd24df2 ]

Stephen Rothwell reported a build error on ppc64 when
CONFIG_TRIM_UNUSED_KSYMS is enabled.

Jessica Yu pointed out the cause of the error with the reference to the
ppc64 ELF ABI:
  "Symbol names with a dot (.) prefix are reserved for holding entry
   point addresses. The value of a symbol named ".FN", if it exists,
   is the entry point of the function "FN".

As it turned out, CONFIG_TRIM_UNUSED_KSYMS has never worked for ppc64,
but this issue has been unnoticed until recently because this option
depends on !UNUSED_SYMBOLS hence is disabled by all{mod,yes}config.
(Then, it was uncovered by another patch removing UNUSED_SYMBOLS.)

Removing the dot prefix in scripts/gen_autoksyms.sh fixes the issue.
Please note it must be done before 'sort -u' because modules have
both ._mcount and _mcount undefined when CONFIG_FUNCTION_TRACER=y.

Link: https://lore.kernel.org/lkml/20210209210843.3af66662@canb.auug.org.au/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: Set CIFS_MOUNT_USE_PREFIX_PATH flag on setting cifs_sb->prepath.

[ Upstream commit a738c93fb1c17e386a09304b517b1c6b2a6a5a8b ]

While debugging another issue today, Steve and I noticed that if a
subdir for a file share is already mounted on the client, any new
mount of any other subdir (or the file share root) of the same share
results in sharing the cifs superblock, which e.g. can result in
incorrect device name.

While setting prefix path for the root of a cifs_sb,
CIFS_MOUNT_USE_PREFIX_PATH flag should also be set.
Without it, prepath is not even considered in some places,
and output of "mount" and various /proc/<>/*mount* related
options can be missing part of the device name.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxgb4: Add new T6 PCI device id 0x6092

[ Upstream commit 3401e4aa43a540881cc97190afead650e709c418 ]

Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Link: https://lore.kernel.org/r/20210202182511.8109-1-rajur@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NET: usb: qmi_wwan: Adding support for Cinterion MV31

[ Upstream commit a4dc7eee9106a9d2a6e08b442db19677aa9699c7 ]

Adding support for Cinterion MV31 with PID 0x00B7.

T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=1e2d ProdID=00b7 Rev=04.14
S:  Manufacturer=Cinterion
S:  Product=Cinterion USB Mobile Broadband
S:  SerialNumber=b3246eed
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

Signed-off-by: Christoph Schemmel <christoph.schemmel@gmail.com>
Link: https://lore.kernel.org/r/20210202084523.4371-1-christoph.schemmel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/xlnx: fix kmemleak by sending vblank_event in atomic_disable

[ Upstream commit a7e02f7796c163ac8297b30223bf24bade9f8a50 ]

When running xrandr to change resolution of DP, the kmemleak as below
can be observed:

unreferenced object 0xffff00080a351000 (size 256):
  comm "Xorg", pid 248, jiffies 4294899614 (age 19.960s)
  hex dump (first 32 bytes):
    98 a0 bc 01 08 00 ff ff 01 00 00 00 00 00 00 00  ................
    ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000e0bd0f69>] kmemleak_alloc+0x30/0x40
    [<00000000cde2f318>] kmem_cache_alloc+0x3d4/0x588
    [<0000000088ea9bd7>] drm_atomic_helper_setup_commit+0x84/0x5f8
    [<000000002290a264>] drm_atomic_helper_commit+0x58/0x388
    [<00000000f6ea78c3>] drm_atomic_commit+0x4c/0x60
    [<00000000c8e0725e>] drm_atomic_connector_commit_dpms+0xe8/0x110
    [<0000000020ade187>] drm_mode_obj_set_property_ioctl+0x1b0/0x450
    [<00000000918206d6>] drm_connector_property_set_ioctl+0x3c/0x68
    [<000000008d51e7a5>] drm_ioctl_kernel+0xc4/0x118
    [<000000002a819b75>] drm_ioctl+0x214/0x448
    [<000000008ca4e588>] __arm64_sys_ioctl+0xa8/0xf0
    [<0000000034e15a35>] el0_svc_common.constprop.0+0x74/0x190
    [<000000001b93d916>] do_el0_svc+0x24/0x90
    [<00000000ce9230e0>] el0_svc+0x14/0x20
    [<00000000e3607d82>] el0_sync_handler+0xb0/0xb8
    [<000000003e79c15f>] el0_sync+0x174/0x180

This is because there is a scenario that a drm_crtc_commit commit is
allocated but not freed. The drm subsystem require/release references
to a CRTC commit by calling drm_crtc_commit_get/put, and when
drm_crtc_commit_put find that commit.ref.refcount is zero, it will
call __drm_crtc_commit_free to free this CRTC commit. Among these
drm_crtc_commit_get/put pairs, there is a drm_crtc_commit_get in
drm_atomic_helper_setup_commit as below:

...
new_crtc_state->event->base.completion = &commit->flip_done;
new_crtc_state->event->base.completion_release = release_crtc_commit;
drm_crtc_commit_get(commit);
...

This reference to the CRTC commit should be released at the function
release_crtc_commit by calling e->completion_release(e->completion) in
drm_send_event_locked. So we need to call drm_send_event_locked at
two places: handling vblank event in the irq handler and the crtc disable
helper. But in zynqmp_disp_crtc_atomic_disable, it only marks the flip
is done and not call drm_crtc_commit_put. This result that the refcount
of this commit is always non-zero and this commit will never be freed.

Since the function drm_crtc_send_vblank_event has operations both sending
a flip_done signal and releasing reference to the CRTC commit, let's use
it instead.

Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210202064121.173362-1-quanyang.wang@windriver.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: Use kvm_pfn_t for local PFN variable in hva_to_pfn_remapped()

commit a9545779ee9e9e103648f6f2552e73cfe808d0f4 upstream.

Use kvm_pfn_t, a.k.a. u64, for the local 'pfn' variable when retrieving
a so called "remapped" hva/pfn pair.  In theory, the hva could resolve to
a pfn in high memory on a 32-bit kernel.

This bug was inadvertantly exposed by commit bd2fae8da794 ("KVM: do not
assume PTE is writable after follow_pfn"), which added an error PFN value
to the mix, causing gcc to comlain about overflowing the unsigned long.

  arch/x86/kvm/../../../virt/kvm/kvm_main.c: In function ‘hva_to_pfn_remapped’:
  include/linux/kvm_host.h:89:30: error: conversion from ‘long long unsigned int’
                                  to ‘long unsigned int’ changes value from
                                  ‘9218868437227405314’ to ‘2’ [-Werror=overflow]
   89 | #define KVM_PFN_ERR_RO_FAULT (KVM_PFN_ERR_MASK + 2)
      |                              ^
virt/kvm/kvm_main.c:1935:9: note: in expansion of macro ‘KVM_PFN_ERR_RO_FAULT’

Cc: stable@vger.kernel.org
Fixes: add6a0cd1c5b ("KVM: MMU: try to fix up page faults before giving up")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210208201940.1258328-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: provide a saner PTE walking API for modules

commit 9fd6dad1261a541b3f5fa7dc5b152222306e6702 upstream.

Currently, the follow_pfn function is exported for modules but
follow_pte is not.  However, follow_pfn is very easy to misuse,
because it does not provide protections (so most of its callers
assume the page is writable!) and because it returns after having
already unlocked the page table lock.

Provide instead a simplified version of follow_pte that does
not have the pmdpp and range arguments.  The older version
survives as follow_invalidate_pte() for use by fs/dax.c.

Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: do not assume PTE is writable after follow_pfn

commit bd2fae8da794b55bf2ac02632da3a151b10e664c upstream.

In order to convert an HVA to a PFN, KVM usually tries to use
the get_user_pages family of functinso.  This however is not
possible for VM_IO vmas; in that case, KVM instead uses follow_pfn.

In doing this however KVM loses the information on whether the
PFN is writable.  That is usually not a problem because the main
use of VM_IO vmas with KVM is for BARs in PCI device assignment,
however it is a bug.  To fix it, use follow_pte and check pte_write
while under the protection of the PTE lock.  The information can
be used to fail hva_to_pfn_remapped or passed back to the
caller via *writable.

Usage of follow_pfn was introduced in commit add6a0cd1c5b ("KVM: MMU: try to fix
up page faults before giving up", 2016-07-05); however, even older version
have the same issue, all the way back to commit 2e2e3738af33 ("KVM:
Handle vma regions with no backing page", 2008-07-20), as they also did
not check whether the PFN was writable.

Fixes: 2e2e3738af33 ("KVM: Handle vma regions with no backing page")
Reported-by: David Stevens <stevensd@google.com>
Cc: 3pvd@google.com
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: simplify follow_pte{,pmd}

commit ff5c19ed4b087073cea38ff0edc80c23d7256943 upstream.

Merge __follow_pte_pmd, follow_pte_pmd and follow_pte into a single
follow_pte function and just pass two additional NULL arguments for the
two previous follow_pte callers.

[sfr@canb.auug.org.au: merge fix for "s390/pci: remove races against pte updates"]
Link: https://lkml.kernel.org/r/20201111221254.7f6a3658@canb.auug.org.au
Link: https://lkml.kernel.org/r/20201029101432.47011-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: unexport follow_pte_pmd

commit 7336375734d65ecc82956b59a79cf5deccce880c upstream.

Patch series "simplify follow_pte a bit".

This small series drops the not needed follow_pte_pmd exports, and
simplifies the follow_pte family of functions a bit.

This patch (of 2):

follow_pte_pmd() is only used by the DAX code, which can't be modular.

Link: https://lkml.kernel.org/r/20201029101432.47011-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Zap the oldest MMU pages, not the newest

commit 8fc517267fb28576dfca2380cc2497a2454b8fae upstream.

Walk the list of MMU pages in reverse in kvm_mmu_zap_oldest_mmu_pages().
The list is FIFO, meaning new pages are inserted at the head and thus
the oldest pages are at the tail.  Using a "forward" iterator causes KVM
to zap MMU pages that were just added, which obliterates guest
performance once the max number of shadow MMU pages is reached.

Fixes: 6b82ef2c9cf1 ("KVM: x86/mmu: Batch zap MMU pages when recycling oldest pages")
Reported-by: Zdenek Kaspar <zkaspar82@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210113205030.3481307-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (dell-smm) Add XPS 15 L502X to fan control blacklist

commit 4008bc7d39537bb3be166d8a3129c4980e1dd7dc upstream.

It has been reported[0] that the Dell XPS 15 L502X exhibits similar
freezing behavior to the other systems[1] on this blacklist. The issue
was exposed by a prior change of mine to automatically load
dell_smm_hwmon on a wider set of XPS models. To fix the regression, add
this model to the blacklist.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=211081
[1] https://bugzilla.kernel.org/show_bug.cgi?id=195751

Fixes: b8a13e5e8f37 ("hwmon: (dell-smm) Use one DMI match for all XPS models")
Cc: stable@vger.kernel.org
Reported-by: Bob Hepple <bob.hepple@gmail.com>
Tested-by: Bob Hepple <bob.hepple@gmail.com>
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/a09eea7616881d40d2db2fb5fa2770dc6166bdae.1611456351.git.tommyhebb@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: tegra: Add power-domain for Tegra210 HDA

commit 1e0ca5467445bc1f41a9e403d6161a22f313dae7 upstream.

HDA initialization is failing occasionally on Tegra210 and following
print is observed in the boot log. Because of this probe() fails and
no sound card is registered.

  [16.800802] tegra-hda 70030000.hda: no codecs found!

Codecs request a state change and enumeration by the controller. In
failure cases this does not seem to happen as STATETS register reads 0.

The problem seems to be related to the HDA codec dependency on SOR
power domain. If it is gated during HDA probe then the failure is
observed. Building Tegra HDA driver into kernel image avoids this
failure but does not completely address the dependency part. Fix this
problem by adding 'power-domains' DT property for Tegra210 HDA. Note
that Tegra186 and Tegra194 HDA do this already.

Fixes: 742af7e7a0a1 ("arm64: tegra: Add Tegra210 support")
Depends-on: 96d1f078ff0 ("arm64: tegra: Add SOR power-domain for Tegra210")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: btusb: Some Qualcomm Bluetooth adapters stop working

commit 234f414efd1164786269849b4fbb533d6c9cdbbf upstream.

This issue starts from linux-5.10-rc1, I reproduced this issue on my
Dell Inspiron 7447 with BT adapter 0cf3:e005, the kernel will print
out: "Bluetooth: hci0: don't support firmware rome 0x31010000", and
someone else also reported the similar issue to bugzilla #211571.

I found this is a regression introduced by 'commit b40f58b97386
("Bluetooth: btusb: Add Qualcomm Bluetooth SoC WCN6855 support"), the
patch assumed that if high ROM version is not zero, it is an adapter
on WCN6855, but many old adapters don't need to load rampatch or nvm,
and they have non-zero high ROM version.

To fix it, let the driver match the rom_version in the
qca_devices_table first, if there is no entry matched, check the
high ROM version, if it is not zero, we assume this adapter is ready
to work and no need to load rampatch and nvm like previously.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211571
Fixes: b40f58b97386 ("Bluetooth: btusb: Add Qualcomm Bluetooth SoC WCN6855 support")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ntfs: check for valid standard information attribute

commit 4dfe6bd94959222e18d512bdf15f6bf9edb9c27c upstream.

Mounting a corrupted filesystem with NTFS resulted in a kernel crash.

We should check for valid STANDARD_INFORMATION attribute offset and length
before trying to access it

Link: https://lkml.kernel.org/r/20210217155930.1506815-1-rkovhaev@gmail.com
Link: https://syzkaller.appspot.com/bug?extid=c584225dabdea2f71969
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Reported-by: syzbot+c584225dabdea2f71969@syzkaller.appspotmail.com
Tested-by: syzbot+c584225dabdea2f71969@syzkaller.appspotmail.com
Acked-by: Anton Altaparmakov <anton@tuxera.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: downgrade warning from mdsmap decode to debug

commit ccd1acdf1c49b835504b235461fd24e2ed826764 upstream.

While the MDS cluster is unstable and changing state the client may get
mdsmap updates that will trigger warnings:

  [144692.478400] ceph: mdsmap_decode got incorrect state(up:standby-replay)
  [144697.489552] ceph: mdsmap_decode got incorrect state(up:standby-replay)
  [144697.489580] ceph: mdsmap_decode got incorrect state(up:standby-replay)

This patch downgrades these warnings to debug, as they may flood the logs
if the cluster is unstable for a while.

Signed-off-by: Luis Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: quirks: add quirk to start video capture on ELMO L-12F document camera reliable

commit 1ebe718bb48278105816ba03a0408ecc2d6cf47f upstream.

Without this quirk starting a video capture from the device often fails with

kernel: uvcvideo: Failed to set UVC probe control : -110 (exp. 34).

Signed-off-by: Stefan Ursella <stefan.ursella@wolfvision.net>
Link: https://lore.kernel.org/r/20210210140713.18711-1-stefan.ursella@wolfvision.net
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: quirks: sort quirk entries

commit 43861d29c0810a70792bf69d37482efb7bb6677d upstream.

Move the last entry to its proper place to maintain the VID/PID sort
order.

Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210210111746.13360-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme-rdma: Use ibdev_to_node instead of dereferencing ->dma_device

commit 22dd4c707673129ed17e803b4bf68a567b2731db upstream.

->dma_device is a private implementation detail of the RDMA core.  Use the
ibdev_to_node helper to get the NUMA node for a ib_device instead of
poking into ->dma_device.

Link: https://lore.kernel.org/r/20201106181941.1878556-5-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Krishnamraju Eraparaju <krishna2@chelsio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA: Lift ibdev_to_node from rds to common code

commit 8ecfca68dc4cbee1272a0161e3f2fb9387dc6930 upstream.

Lift the ibdev_to_node from rds to common code and document it.

Link: https://lore.kernel.org/r/20201106181941.1878556-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Krishnamraju Eraparaju <krishna2@chelsio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: make arrays usage and value to be the same

commit ed9be64eefe26d7d8b0b5b9fa3ffdf425d87a01f upstream.

The HID subsystem allows an "HID report field" to have a different
number of "values" and "usages" when it is allocated. When a field
struct is created, the size of the usage array is guaranteed to be at
least as large as the values array, but it may be larger. This leads to
a potential out-of-bounds write in
__hidinput_change_resolution_multipliers() and an out-of-bounds read in
hidinput_count_leds().

To fix this, let's make sure that both the usage and value arrays are
the same size.

Cc: stable@vger.kernel.org
Signed-off-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: Fix truncation handling for mod32 dst reg wrt zero

commit 9b00f1b78809309163dda2d044d9e94a3c0248a3 upstream.

Recently noticed that when mod32 with a known src reg of 0 is performed,
then the dst register is 32-bit truncated in verifier:

  0: R1=ctx(id=0,off=0,imm=0) R10=fp0
  0: (b7) r0 = 0
  1: R0_w=inv0 R1=ctx(id=0,off=0,imm=0) R10=fp0
  1: (b7) r1 = -1
  2: R0_w=inv0 R1_w=inv-1 R10=fp0
  2: (b4) w2 = -1
  3: R0_w=inv0 R1_w=inv-1 R2_w=inv4294967295 R10=fp0
  3: (9c) w1 %= w0
  4: R0_w=inv0 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  4: (b7) r0 = 1
  5: R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  5: (1d) if r1 == r2 goto pc+1
   R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  6: R0_w=inv1 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  6: (b7) r0 = 2
  7: R0_w=inv2 R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2_w=inv4294967295 R10=fp0
  7: (95) exit
  7: R0=inv1 R1=inv(id=0,umin_value=4294967295,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R2=inv4294967295 R10=fp0
  7: (95) exit

However, as a runtime result, we get 2 instead of 1, meaning the dst
register does not contain (u32)-1 in this case. The reason is fairly
straight forward given the 0 test leaves the dst register as-is:

  # ./bpftool p d x i 23
   0: (b7) r0 = 0
   1: (b7) r1 = -1
   2: (b4) w2 = -1
   3: (16) if w0 == 0x0 goto pc+1
   4: (9c) w1 %= w0
   5: (b7) r0 = 1
   6: (1d) if r1 == r2 goto pc+1
   7: (b7) r0 = 2
   8: (95) exit

This was originally not an issue given the dst register was marked as
completely unknown (aka 64 bit unknown). However, after 468f6eafa6c4
("bpf: fix 32-bit ALU op verification") the verifier casts the register
output to 32 bit, and hence it becomes 32 bit unknown. Note that for
the case where the src register is unknown, the dst register is marked
64 bit unknown. After the fix, the register is truncated by the runtime
and the test passes:

  # ./bpftool p d x i 23
   0: (b7) r0 = 0
   1: (b7) r1 = -1
   2: (b4) w2 = -1
   3: (16) if w0 == 0x0 goto pc+2
   4: (9c) w1 %= w0
   5: (05) goto pc+1
   6: (bc) w1 = w1
   7: (b7) r0 = 1
   8: (1d) if r1 == r2 goto pc+1
   9: (b7) r0 = 2
  10: (95) exit

Semantics also match with {R,W}x mod{64,32} 0 -> {R,W}x. Invalid div
has always been {R,W}x div{64,32} 0 -> 0. Rewrites are as follows:

  mod32:                            mod64:

  (16) if w0 == 0x0 goto pc+2       (15) if r0 == 0x0 goto pc+1
  (9c) w1 %= w0                     (9f) r1 %= r0
  (05) goto pc+1
  (bc) w1 = w1

Fixes: 468f6eafa6c4 ("bpf: fix 32-bit ALU op verification")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.18

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
Tested-by: Jason Self <jason@bluehome.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20210222121019.444399883@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: pwc: Use correct device for DMA

commit 69c9e825e812ec6d663e64ebf14bd3bc7f37e2c7 upstream.

This fixes the following newly introduced warning:

[   15.518253] ------------[ cut here ]------------
[   15.518941] WARNING: CPU: 0 PID: 246 at kernel/dma/mapping.c:149 dma_map_page_attrs+0x1a8/0x1d0
[   15.520634] Modules linked in: pwc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc efivarfs
[   15.522335] CPU: 0 PID: 246 Comm: v4l2-test Not tainted 5.11.0-rc1+ #1
[   15.523281] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[   15.524438] RIP: 0010:dma_map_page_attrs+0x1a8/0x1d0
[   15.525135] Code: 10 5b 5d 41 5c 41 5d c3 4d 89 d0 eb d7 4d 89 c8 89 e9 48 89 da e8 68 29 00 00 eb d1 48 89 f2 48 2b 50 18 48 89 d0 eb 83 0f 0b <0f> 0b 48 c7 c0 ff ff ff ff eb b8 48 89 d9 48 8b 40 40 e8 61 69 d2
[   15.527938] RSP: 0018:ffffa2694047bca8 EFLAGS: 00010246
[   15.528716] RAX: 0000000000000000 RBX: 0000000000002580 RCX: 0000000000000000
[   15.529782] RDX: 0000000000000000 RSI: ffffcdce000ecc00 RDI: ffffa0b4bdb888a0
[   15.530849] RBP: 0000000000000002 R08: 0000000000000002 R09: 0000000000000000
[   15.531881] R10: 0000000000000004 R11: 000000000002d8c0 R12: 0000000000000000
[   15.532911] R13: ffffa0b4bdb88800 R14: ffffa0b483820000 R15: ffffa0b4bdb888a0
[   15.533942] FS:  00007fc5fbb5e4c0(0000) GS:ffffa0b4fc000000(0000) knlGS:0000000000000000
[   15.535141] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   15.535988] CR2: 00007fc5fb6ea138 CR3: 0000000003812000 CR4: 00000000001506f0
[   15.537025] Call Trace:
[   15.537425]  start_streaming+0x2e9/0x4b0 [pwc]
[   15.538143]  vb2_start_streaming+0x5e/0x110 [videobuf2_common]
[   15.538989]  vb2_core_streamon+0x107/0x140 [videobuf2_common]
[   15.539831]  __video_do_ioctl+0x18f/0x4a0 [videodev]
[   15.540670]  video_usercopy+0x13a/0x5b0 [videodev]
[   15.541349]  ? video_put_user+0x230/0x230 [videodev]
[   15.542096]  ? selinux_file_ioctl+0x143/0x200
[   15.542752]  v4l2_ioctl+0x40/0x50 [videodev]
[   15.543360]  __x64_sys_ioctl+0x89/0xc0
[   15.543930]  do_syscall_64+0x33/0x40
[   15.544448]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   15.545236] RIP: 0033:0x7fc5fb671587
[   15.545780] Code: b3 66 90 48 8b 05 11 49 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e1 48 2c 00 f7 d8 64 89 01 48
[   15.548486] RSP: 002b:00007fff0f71f038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[   15.549578] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc5fb671587
[   15.550664] RDX: 00007fff0f71f060 RSI: 0000000040045612 RDI: 0000000000000003
[   15.551706] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[   15.552738] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff0f71f060
[   15.553817] R13: 00007fff0f71f1d0 R14: 0000000000de1270 R15: 0000000000000000
[   15.554914] ---[ end trace 7be03122966c2486 ]---

Fixes: 1161db6776bd ("media: usb: pwc: Don't use coherent DMA buffers for ISO transfer")
Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix crash after non-aligned direct IO write with O_DSYNC

Whenever we attempt to do a non-aligned direct IO write with O_DSYNC, we
end up triggering an assertion and crashing. Example reproducer:

  $ cat test.sh
  #!/bin/bash

  DEV=/dev/sdj
  MNT=/mnt/sdj

  mkfs.btrfs -f $DEV > /dev/null
  mount $DEV $MNT

  # Do a direct IO write with O_DSYNC into a non-aligned range...
  xfs_io -f -d -s -c "pwrite -S 0xab -b 64K 1111 64K" $MNT/foobar

  umount $MNT

When running the reproducer an assertion fails and produces the following
trace:

  [ 2418.403134] assertion failed: !current->journal_info || flush != BTRFS_RESERVE_FLUSH_DATA, in fs/btrfs/space-info.c:1467
  [ 2418.403745] ------------[ cut here ]------------
  [ 2418.404306] kernel BUG at fs/btrfs/ctree.h:3286!
  [ 2418.404862] invalid opcode: 0000 [#2] PREEMPT SMP DEBUG_PAGEALLOC PTI
  [ 2418.405451] CPU: 1 PID: 64705 Comm: xfs_io Tainted: G      D           5.10.15-btrfs-next-87 #1
  [ 2418.406026] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
  [ 2418.407228] RIP: 0010:assertfail.constprop.0+0x18/0x26 [btrfs]
  [ 2418.407835] Code: e6 48 c7 (...)
  [ 2418.409078] RSP: 0018:ffffb06080d13c98 EFLAGS: 00010246
  [ 2418.409696] RAX: 000000000000006c RBX: ffff994c1debbf08 RCX: 0000000000000000
  [ 2418.410302] RDX: 0000000000000000 RSI: 0000000000000027 RDI: 00000000ffffffff
  [ 2418.410904] RBP: ffff994c21770000 R08: 0000000000000000 R09: 0000000000000000
  [ 2418.411504] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000010000
  [ 2418.412111] R13: ffff994c22198400 R14: ffff994c21770000 R15: 0000000000000000
  [ 2418.412713] FS:  00007f54fd7aff00(0000) GS:ffff994d35200000(0000) knlGS:0000000000000000
  [ 2418.413326] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [ 2418.413933] CR2: 000056549596d000 CR3: 000000010b928003 CR4: 0000000000370ee0
  [ 2418.414528] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [ 2418.415109] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [ 2418.415669] Call Trace:
  [ 2418.416254]  btrfs_reserve_data_bytes.cold+0x22/0x22 [btrfs]
  [ 2418.416812]  btrfs_check_data_free_space+0x4c/0xa0 [btrfs]
  [ 2418.417380]  btrfs_buffered_write+0x1b0/0x7f0 [btrfs]
  [ 2418.418315]  btrfs_file_write_iter+0x2a9/0x770 [btrfs]
  [ 2418.418920]  new_sync_write+0x11f/0x1c0
  [ 2418.419430]  vfs_write+0x2bb/0x3b0
  [ 2418.419972]  __x64_sys_pwrite64+0x90/0xc0
  [ 2418.420486]  do_syscall_64+0x33/0x80
  [ 2418.420979]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  [ 2418.421486] RIP: 0033:0x7f54fda0b986
  [ 2418.421981] Code: 48 c7 c0 (...)
  [ 2418.423019] RSP: 002b:00007ffc40569c38 EFLAGS: 00000246 ORIG_RAX: 0000000000000012
  [ 2418.423547] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f54fda0b986
  [ 2418.424075] RDX: 0000000000010000 RSI: 000056549595e000 RDI: 0000000000000003
  [ 2418.424596] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000400
  [ 2418.425119] R10: 0000000000000400 R11: 0000000000000246 R12: 00000000ffffffff
  [ 2418.425644] R13: 0000000000000400 R14: 0000000000010000 R15: 0000000000000000
  [ 2418.426148] Modules linked in: btrfs blake2b_generic (...)
  [ 2418.429540] ---[ end trace ef2aeb44dc0afa34 ]---

1) At btrfs_file_write_iter() we set current->journal_info to
   BTRFS_DIO_SYNC_STUB;

2) We then call __btrfs_direct_write(), which calls btrfs_direct_IO();

3) We can't do the direct IO write because it starts at a non-aligned
   offset (1111). So at btrfs_direct_IO() we return -EINVAL (coming from
   check_direct_IO() which does the alignment check), but we leave
   current->journal_info set to BTRFS_DIO_SYNC_STUB - we only clear it
   at btrfs_dio_iomap_begin(), because we assume we always get there;

4) Then at __btrfs_direct_write() we see that the attempt to do the
   direct IO write was not successful, 0 bytes written, so we fallback
   to a buffered write by calling btrfs_buffered_write();

5) There we call btrfs_check_data_free_space() which in turn calls
   btrfs_alloc_data_chunk_ondemand() and that calls
   btrfs_reserve_data_bytes() with flush == BTRFS_RESERVE_FLUSH_DATA;

6) Then at btrfs_reserve_data_bytes() we have current->journal_info set to
   BTRFS_DIO_SYNC_STUB, therefore not NULL, and flush has the value
   BTRFS_RESERVE_FLUSH_DATA, triggering the second assertion:

  int btrfs_reserve_data_bytes(struct btrfs_fs_info *fs_info, u64 bytes,
                               enum btrfs_reserve_flush_enum flush)
  {
      struct btrfs_space_info *data_sinfo = fs_info->data_sinfo;
      int ret;

      ASSERT(flush == BTRFS_RESERVE_FLUSH_DATA ||
             flush == BTRFS_RESERVE_FLUSH_FREE_SPACE_INODE);
      ASSERT(!current->journal_info || flush != BTRFS_RESERVE_FLUSH_DATA);
  (...)

So fix that by setting the journal to NULL whenever check_direct_IO()
returns a failure.

This bug only affects 5.10 kernels, and the regression was introduced in
5.10-rc1 by commit 0eb79294dbe328 ("btrfs: dio iomap DSYNC workaround").
The bug does not exist in 5.11 kernels due to commit ecfdc08b8cc65d
("btrfs: remove dio iomap DSYNC workaround"), which depends on a large
patchset that went into the merge window for 5.11. So this is a fix only
for 5.10.x stable kernels, as there are people hitting this bug.

Fixes: 0eb79294dbe328 ("btrfs: dio iomap DSYNC workaround")
CC: stable@vger.kernel.org # 5.10 (and only 5.10)
Acked-by: David Sterba <dsterba@suse.com>
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1181605
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix backport of 2175bf57dc952 in 5.10.13

There's a mistake in backport of upstream commit 2175bf57dc95 ("btrfs:
fix possible free space tree corruption with online conversion") as
5.10.13 commit 2175bf57dc95.

The enum value BTRFS_FS_FREE_SPACE_TREE_UNTRUSTED has been added to the
wrong enum set, colliding with value of BTRFS_FS_QUOTA_ENABLE. This
could cause problems during the tree conversion, where the quotas
wouldn't be set up properly but the related code executed anyway due to
the bit set.

Link: https://lore.kernel.org/linux-btrfs/20210219111741.95DD.409509F4@e16-tech.com
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
CC: stable@vger.kernel.org # 5.10.13+
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: btusb: Always fallback to alt 1 for WBS

commit 517b693351a2d04f3af1fc0e506ac7e1346094de upstream.

When alt mode 6 is not available, fallback to the kernel <= 5.7 behavior
of always using alt mode 1.

Prior to kernel 5.8, btusb would always use alt mode 1 for WBS (Wide
Band Speech aka mSBC aka transparent SCO).  In commit baac6276c0a9
("Bluetooth: btusb: handle mSBC audio over USB Endpoints") this
was changed to use alt mode 6, which is the recommended mode in the
Bluetooth spec (Specifications of the Bluetooth System, v5.0, Vol 4.B
§2.2.1).  However, many if not most BT USB adapters do not support alt
mode 6.  In fact, I have been unable to find any which do.

In kernel 5.8, this was changed to use alt mode 6, and if not available,
use alt mode 0.  But mode 0 has a zero byte max packet length and can
not possibly work.  It is just there as a zero-bandwidth dummy mode to
work around a USB flaw that would prevent device enumeration if
insufficient bandwidth were available for the lowest isoc mode
supported.

In effect, WBS was broken for all USB-BT adapters that do not support
alt 6, which appears to nearly all of them.

Then in commit 461f95f04f19 ("Bluetooth: btusb: USB alternate setting 1 for
WBS") the 5.7 behavior was restored, but only for Realtek adapters.

I've tested a Broadcom BRCM20702A and CSR 8510 adapter, both work with
the 5.7 behavior and do not with the 5.8.

So get rid of the Realtek specific flag and use the 5.7 behavior for all
adapters as a fallback when alt 6 is not available.  This was the
kernel's behavior prior to 5.8 and I can find no adapters for which it
is not correct.  And even if there is an adapter for which this does not
work, the current behavior would be to fall back to alt 0, which can not
possibly work either, and so is no better.

Signed-off-by: Trent Piepho <tpiepho@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Cc: Sjoerd Simons <sjoerd@luon.net>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: protect tty_write from odd low-level tty disciplines

commit 3342ff2698e9720f4040cc458a2744b2b32f5c3a upstream.

Al root-caused a new warning from syzbot to the ttyprintk tty driver
returning a write count larger than the data the tty layer actually gave
it.  Which confused the tty write code mightily, and with the new
iov_iter based code, caused a WARNING in iov_iter_revert().

syzbot correctly bisected the source of the new warning to commit
9bb48c82aced ("tty: implement write_iter"), but the oddity goes back
much further, it just didn't get caught by anything before.

Reported-by: syzbot+3d2c27c2b7dc2a94814d@syzkaller.appspotmail.com
Fixes: 9bb48c82aced ("tty: implement write_iter")
Debugged-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-blkback: fix error handling in xen_blkbk_map()

commit 871997bc9e423f05c7da7c9178e62dde5df2a7f8 upstream.

The function uses a goto-based loop, which may lead to an earlier error
getting discarded by a later iteration. Exit this ad-hoc loop when an
error was encountered.

The out-of-memory error path additionally fails to fill a structure
field looked at by xen_blkbk_unmap_prepare() before inspecting the
handle which does get properly set (to BLKBACK_INVALID_HANDLE).

Since the earlier exiting from the ad-hoc loop requires the same field
filling (invalidation) as that on the out-of-memory path, fold both
paths. While doing so, drop the pr_alert(), as extra log messages aren't
going to help the situation (the kernel will log oom conditions already
anyway).

This is XSA-365.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-scsiback: don't "handle" error by BUG()

commit 7c77474b2d22176d2bfb592ec74e0f2cb71352c9 upstream.

In particular -ENOMEM may come back here, from set_foreign_p2m_mapping().
Don't make problems worse, the more that handling elsewhere (together
with map's status fields now indicating whether a mapping wasn't even
attempted, and hence has to be considered failed) doesn't require this
odd way of dealing with errors.

This is part of XSA-362.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-netback: don't "handle" error by BUG()

commit 3194a1746e8aabe86075fd3c5e7cf1f4632d7f16 upstream.

In particular -ENOMEM may come back here, from set_foreign_p2m_mapping().
Don't make problems worse, the more that handling elsewhere (together
with map's status fields now indicating whether a mapping wasn't even
attempted, and hence has to be considered failed) doesn't require this
odd way of dealing with errors.

This is part of XSA-362.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-blkback: don't "handle" error by BUG()

commit 5a264285ed1cd32e26d9de4f3c8c6855e467fd63 upstream.

In particular -ENOMEM may come back here, from set_foreign_p2m_mapping().
Don't make problems worse, the more that handling elsewhere (together
with map's status fields now indicating whether a mapping wasn't even
attempted, and hence has to be considered failed) doesn't require this
odd way of dealing with errors.

This is part of XSA-362.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/arm: don't ignore return errors from set_phys_to_machine

commit 36bf1dfb8b266e089afa9b7b984217f17027bf35 upstream.

set_phys_to_machine can fail due to lack of memory, see the kzalloc call
in arch/arm/xen/p2m.c:__set_phys_to_machine_multi.

Don't ignore the potential return error in set_foreign_p2m_mapping,
returning it to the caller instead.

This is part of XSA-361.

Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Cc: stable@vger.kernel.org
Reviewed-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Xen/gntdev: correct error checking in gntdev_map_grant_pages()

commit ebee0eab08594b2bd5db716288a4f1ae5936e9bc upstream.

Failure of the kernel part of the mapping operation should also be
indicated as an error to the caller, or else it may assume the
respective kernel VA is okay to access.

Furthermore gnttab_map_refs() failing still requires recording
successfully mapped handles, so they can be unmapped subsequently. This
in turn requires there to be a way to tell full hypercall failure from
partial success - preset map_op status fields such that they won't
"happen" to look as if the operation succeeded.

Also again use GNTST_okay instead of implying its value (zero).

This is part of XSA-361.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Xen/gntdev: correct dev_bus_addr handling in gntdev_map_grant_pages()

commit dbe5283605b3bc12ca45def09cc721a0a5c853a2 upstream.

We may not skip setting the field in the unmap structure when
GNTMAP_device_map is in use - such an unmap would fail to release the
respective resources (a page ref in the hypervisor). Otoh the field
doesn't need setting at all when GNTMAP_device_map is not in use.

To record the value for unmapping, we also better don't use our local
p2m: In particular after a subsequent change it may not have got updated
for all the batch elements. Instead it can simply be taken from the
respective map's results.

We can additionally avoid playing this game altogether for the kernel
part of the mappings in (x86) PV mode.

This is part of XSA-361.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Xen/x86: also check kernel mapping in set_foreign_p2m_mapping()

commit b512e1b077e5ccdbd6e225b15d934ab12453b70a upstream.

We should not set up further state if either mapping failed; paying
attention to just the user mapping's status isn't enough.

Also use GNTST_okay instead of implying its value (zero).

This is part of XSA-361.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Xen/x86: don't bail early from clear_foreign_p2m_mapping()

commit a35f2ef3b7376bfd0a57f7844bd7454389aae1fc upstream.

Its sibling (set_foreign_p2m_mapping()) as well as the sibling of its
only caller (gnttab_map_refs()) don't clean up after themselves in case
of error. Higher level callers are expected to do so. However, in order
for that to really clean up any partially set up state, the operation
should not terminate upon encountering an entry in unexpected state. It
is particularly relevant to notice here that set_foreign_p2m_mapping()
would skip setting up a p2m entry if its grant mapping failed, but it
would continue to set up further p2m entries as long as their mappings
succeeded.

Arguably down the road set_foreign_p2m_mapping() may want its page state
related WARN_ON() also converted to an error return.

This is part of XSA-361.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: fix proc_fs init handling in af_packet and tls

[ Upstream commit a268e0f2455c32653140775662b40c2b1f1b2efa ]

proc_fs was used, in af_packet, without a surrounding #ifdef,
although there is no hard dependency on proc_fs.
That caused the initialization of the af_packet module to fail
when CONFIG_PROC_FS=n.

Specifically, proc_create_net() was used in af_packet.c,
and when it fails, packet_net_init() returns -ENOMEM.
It will always fail when the kernel is compiled without proc_fs,
because, proc_create_net() for example always returns NULL.

The calling order that starts in af_packet.c is as follows:
packet_init()
register_pernet_subsys()
register_pernet_operations()
__register_pernet_operations()
ops_init()
ops->init() (packet_net_ops.init=packet_net_init())
proc_create_net()

It worked in the past because register_pernet_subsys()'s return value
wasn't checked before this Commit 36096f2f4fa0 ("packet: Fix error path in
packet_init.").
It always returned an error, but was not checked before, so everything
was working even when CONFIG_PROC_FS=n.

The fix here is simply to add the necessary #ifdef.

This also fixes a similar error in tls_proc.c, that was found by Jakub
Kicinski.

Fixes: d26b698dd3cd ("net/tls: add skeleton of MIB statistics")
Fixes: 36096f2f4fa0 ("packet: Fix error path in packet_init")
Signed-off-by: Yonatan Linik <yonatanlinik@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bridge: Fix a warning when del bridge sysfs

[ Upstream commit 989a1db06eb18ff605377eec87e18d795e0ec74b ]

I got a warining report:

br_sysfs_addbr: can't create group bridge4/bridge
------------[ cut here ]------------
sysfs group 'bridge' not found for kobject 'bridge4'
WARNING: CPU: 2 PID: 9004 at fs/sysfs/group.c:279 sysfs_remove_group fs/sysfs/group.c:279 [inline]
WARNING: CPU: 2 PID: 9004 at fs/sysfs/group.c:279 sysfs_remove_group+0x153/0x1b0 fs/sysfs/group.c:270
Modules linked in: iptable_nat
...
Call Trace:
  br_dev_delete+0x112/0x190 net/bridge/br_if.c:384
  br_dev_newlink net/bridge/br_netlink.c:1381 [inline]
  br_dev_newlink+0xdb/0x100 net/bridge/br_netlink.c:1362
  __rtnl_newlink+0xe11/0x13f0 net/core/rtnetlink.c:3441
  rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3500
  rtnetlink_rcv_msg+0x385/0x980 net/core/rtnetlink.c:5562
  netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2494
  netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
  netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1330
  netlink_sendmsg+0x793/0xc80 net/netlink/af_netlink.c:1919
  sock_sendmsg_nosec net/socket.c:651 [inline]
  sock_sendmsg+0x139/0x170 net/socket.c:671
  ____sys_sendmsg+0x658/0x7d0 net/socket.c:2353
  ___sys_sendmsg+0xf8/0x170 net/socket.c:2407
  __sys_sendmsg+0xd3/0x190 net/socket.c:2440
  do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

In br_device_event(), if the bridge sysfs fails to be added,
br_device_event() should return error. This can prevent warining
when removing bridge sysfs that do not exist.

Fixes: bb900b27a2f4 ("bridge: allow creating bridge devices with netlink")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Tested-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20201211122921.40386-1-wanghai38@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: openvswitch: fix TTL decrement exception action execution

[ Upstream commit 09d6217254c004f6237cc2c2bfe604af58e9a8c5 ]

Currently, the exception actions are not processed correctly as the wrong
dataset is passed. This change fixes this, including the misleading
comment.

In addition, a check was added to make sure we work on an IPv4 packet,
and not just assume if it's not IPv6 it's IPv4.

This was all tested using OVS with patch,
https://patchwork.ozlabs.org/project/openvswitch/list/?series=21639,
applied and sending packets with a TTL of 1 (and 0), both with IPv4
and IPv6.

Fixes: 69929d4c49e1 ("net: openvswitch: fix TTL decrement action netlink message format")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/160733569860.3007.12938188180387116741.stgit@wsfd-netdev64.ntdv.lab.eng.bos.redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: incorrect Kconfig dependencies on Netfilter modules

[ Upstream commit 102e2c07239c07144d9c7338ec09b9d47f2e5f79 ]

- NET_ACT_CONNMARK and NET_ACT_CTINFO only require conntrack support.
- NET_ACT_IPT only requires NETFILTER_XTABLES symbols, not
  IP_NF_IPTABLES. After this patch, NET_ACT_IPT becomes consistent
  with NET_EMATCH_IPT. NET_ACT_IPT dependency on IP_NF_IPTABLES predates
  Linux-2.6.12-rc2 (initial git repository build).

Fixes: 22a5dc0e5e3e ("net: sched: Introduce connmark action")
Fixes: 24ec483cec98 ("net: sched: Introduce act_ctinfo action")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/r/20201208204707.11268-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7615: fix rdd mcu cmd endianness

[ Upstream commit 0211c282bc8aaa15343aadbc6e23043e7057f77d ]

Similar to mt7915 driver, fix mt7615 radar mcu command endianness

Fixes: 2ce73efe0f8e5 ("mt76: mt7615: initialize radar specs from host driver")
Fixes: 70911d9638069 ("mt76: mt7615: add radar pattern test knob to debugfs")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7915: fix endian issues

[ Upstream commit cee236e1489ecca9d23d6ce6f60d126cc651a5ba ]

Multiple MCU messages were using u16/u32 fields without endian annotations
or conversions

Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Fixes: 5517f78b0063 ("mt76: mt7915: enable firmware module debug support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: fix miss init the mru in qdisc_skb_cb

[ Upstream commit aadaca9e7c392dbf877af8cefb156199f1a67bbe ]

The mru in the qdisc_skb_cb should be init as 0. Only defrag packets in the
act_ct will set the value.

Fixes: 038ebb1a713d ("net/sched: act_ct: fix miss set mru for ovs after defrag in act_ct")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: skip to next candidate if subflow has unacked data

[ Upstream commit 860975c6f80adae9d2c7654bde04a99dd28bc94f ]

In case a subflow path is blocked, MPTCP-level retransmit may not take
place anymore because such subflow is likely to have unacked data left
in its write queue.

Ignore subflows that have experienced loss and test next candidate.

Fixes: 3b1d6210a95773691 ("mptcp: implement and use MPTCP-level retransmission")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qrtr: Fix port ID for control messages

[ Upstream commit ae068f561baa003d260475c3e441ca454b186726 ]

The port ID for control messages was uncorrectly set with broadcast
node ID value, causing message to be dropped on remote side since
not passing packet filtering (cb->dst_port != QRTR_PORT_CTRL).

Fixes: d27e77a3de28 ("net: qrtr: Reset the node and port ID of broadcast messages")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/isert: add module param to set sg_tablesize for IO cmd

[ Upstream commit dae7a75f1f19bffb579daf148f8d8addd2726772 ]

Currently, iser target support max IO size of 16MiB by default. For some
adapters, allocating this amount of resources might reduce the total
number of possible connections that can be created. For those adapters,
it's preferred to reduce the max IO size to be able to create more
connections. Since there is no handshake procedure for max IO size in iser
protocol, set the default max IO size to 1MiB and add a module parameter
for enabling the option to control it for suitable adapters.

Fixes: 317000b926b0 ("IB/isert: allocate RW ctxs according to max IO size")
Link: https://lore.kernel.org/r/20201019094628.17202-1-mgurtovoy@nvidia.com
Reported-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vdpa_sim: add get_config callback in vdpasim_dev_attr

commit 65b709586e222fa6ffd4166ac7fdb5d5dad113ee upstream.

The get_config callback can be used by the device to fill the
config structure.
The callback will be invoked in vdpasim_get_config() before copying
bytes into caller buffer.

Move vDPA-net config updates from vdpasim_set_features() in the
new vdpasim_net_get_config() callback.
This is safe since in vdpa_get_config() we already check that
.set_features() callback is called before .get_config().

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-13-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vdpa_sim: make 'config' generic and usable for any device type

commit f37cbbc65178e0a45823d281d290c4c02da9631c upstream.

Add new 'config_size' attribute in 'vdpasim_dev_attr' and allocates
'config' dynamically to support any device types.

Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-12-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vdpa_sim: store parsed MAC address in a buffer

commit cf1a3b35382c10ce315c32bd2b3d7789897fbe13 upstream.

As preparation for the next patches, we store the MAC address,
parsed during the vdpasim_create(), in a buffer that will be used
to fill 'config' together with other configurations.

Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-11-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vdpa_sim: add struct vdpasim_dev_attr for device attributes

commit 6c6e28fe45794054410ad8cd2770af69fbe0338d upstream.

vdpasim_dev_attr will contain device specific attributes. We starting
moving the number of virtqueues (i.e. nvqs) to vdpasim_dev_attr.

vdpasim_create() creates a new vDPA simulator following the device
attributes defined in the vdpasim_dev_attr parameter.

Co-developed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-7-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vdpa_sim: remove hard-coded virtq count

commit 423248d60d2b655321fc49eca1545f95a1bc9d6c upstream.

Add a new attribute that will define the number of virt queues to be
created for the vdpasim device.

Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
[sgarzare: replace kmalloc_array() with kcalloc()]
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20201215144256.155342-4-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.17

Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Jason Self <jason@bluehome.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Ross Schmidt <ross.schm.dev@gmail.com>
Link: https://lore.kernel.org/r/20210215152719.459796636@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kcov, usb: only collect coverage from __usb_hcd_giveback_urb in softirq

commit aee9ddb1d3718d3ba05b50c51622d7792ae749c9 upstream.

Currently there's a KCOV remote coverage collection section in
__usb_hcd_giveback_urb(). Initially that section was added based on the
assumption that usb_hcd_giveback_urb() can only be called in interrupt
context as indicated by a comment before it. This is what happens when
syzkaller is fuzzing the USB stack via the dummy_hcd driver.

As it turns out, it's actually valid to call usb_hcd_giveback_urb() in task
context, provided that the caller turned off the interrupts; USB/IP does
exactly that. This can lead to a nested KCOV remote coverage collection
sections both trying to collect coverage in task context. This isn't
supported by KCOV, and leads to a WARNING.

Change __usb_hcd_giveback_urb() to only call kcov_remote_*() callbacks
when it's being executed in a softirq. As the result, the coverage from
USB/IP related usb_hcd_giveback_urb() calls won't be collected, but the
WARNING is fixed.

A potential future improvement would be to support nested remote coverage
collection sections, but this patch doesn't address that.

Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/f3a7a153f0719cb53ec385b16e912798bd3e4cf9.1602856358.git.andreyknvl@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: expand warning in ovl_d_real()

commit cef4cbff06fbc3be54d6d79ee139edecc2ee8598 upstream.

There was a syzbot report with this warning but insufficient information...

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/qrtr: restrict user-controlled length in qrtr_tun_write_iter()

commit 2a80c15812372e554474b1dba0b1d8e467af295d upstream.

syzbot found WARNING in qrtr_tun_write_iter [1] when write_iter length
exceeds KMALLOC_MAX_SIZE causing order >= MAX_ORDER condition.

Additionally, there is no check for 0 length write.

[1]
WARNING: mm/page_alloc.c:5011
[..]
Call Trace:
 alloc_pages_current+0x18c/0x2a0 mm/mempolicy.c:2267
 alloc_pages include/linux/gfp.h:547 [inline]
 kmalloc_order+0x2e/0xb0 mm/slab_common.c:837
 kmalloc_order_trace+0x14/0x120 mm/slab_common.c:853
 kmalloc include/linux/slab.h:557 [inline]
 kzalloc include/linux/slab.h:682 [inline]
 qrtr_tun_write_iter+0x8a/0x180 net/qrtr/tun.c:83
 call_write_iter include/linux/fs.h:1901 [inline]

Reported-by: syzbot+c2a7e5c5211605a90865@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Link: https://lore.kernel.org/r/20210202092059.1361381-1-snovitoll@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/rds: restrict iovecs length for RDS_CMSG_RDMA_ARGS

commit a11148e6fcce2ae53f47f0a442d098d860b4f7db upstream.

syzbot found WARNING in rds_rdma_extra_size [1] when RDS_CMSG_RDMA_ARGS
control message is passed with user-controlled
0x40001 bytes of args->nr_local, causing order >= MAX_ORDER condition.

The exact value 0x40001 can be checked with UIO_MAXIOV which is 0x400.
So for kcalloc() 0x400 iovecs with sizeof(struct rds_iovec) = 0x10
is the closest limit, with 0x10 leftover.

Same condition is currently done in rds_cmsg_rdma_args().

[1] WARNING: mm/page_alloc.c:5011
[..]
Call Trace:
 alloc_pages_current+0x18c/0x2a0 mm/mempolicy.c:2267
 alloc_pages include/linux/gfp.h:547 [inline]
 kmalloc_order+0x2e/0xb0 mm/slab_common.c:837
 kmalloc_order_trace+0x14/0x120 mm/slab_common.c:853
 kmalloc_array include/linux/slab.h:592 [inline]
 kcalloc include/linux/slab.h:621 [inline]
 rds_rdma_extra_size+0xb2/0x3b0 net/rds/rdma.c:568
 rds_rm_size net/rds/send.c:928 [inline]

Reported-by: syzbot+1bd2b07f93745fa38425@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Link: https://lore.kernel.org/r/20210201203233.1324704-1-snovitoll@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vsock: fix locking in vsock_shutdown()

commit 1c5fae9c9a092574398a17facc31c533791ef232 upstream.

In vsock_shutdown() we touched some socket fields without holding the
socket lock, such as 'state' and 'sk_flags'.

Also, after the introduction of multi-transport, we are accessing
'vsk->transport' in vsock_send_shutdown() without holding the lock
and this call can be made while the connection is in progress, so
the transport can change in the meantime.

To avoid issues, we hold the socket lock when we enter in
vsock_shutdown() and release it when we leave.

Among the transports that implement the 'shutdown' callback, only
hyperv_transport acquired the lock. Since the caller now holds it,
we no longer take it.

Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vsock/virtio: update credit only if socket is not closed

commit ce7536bc7398e2ae552d2fabb7e0e371a9f1fe46 upstream.

If the socket is closed or is being released, some resources used by
virtio_transport_space_update() such as 'vsk->trans' may be released.

To avoid a use after free bug we should only update the available credit
when we are sure the socket is still open and we have the lock held.

Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20210208144454.84438-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>