review.tizen.org Git - platform/kernel/linux-starfive.git/log

e1000e: continue to init PHY even when failed to disable ULP

After 'commit e086ba2fccda4 ("e1000e: disable s0ix entry and exit flows
for ME systems")',
ThinkPad P14s always failed to disable ULP by ME.
'commit 0c80cdbf3320 ("e1000e: Warn if disabling ULP failed")'
break out of init phy:

error log:
[   42.364753] e1000e 0000:00:1f.6 enp0s31f6: Failed to disable ULP
[   42.524626] e1000e 0000:00:1f.6 enp0s31f6: PHY Wakeup cause - Unicast Packet
[   42.822476] e1000e 0000:00:1f.6 enp0s31f6: Hardware Error

When disable s0ix, E1000_FWSM_ULP_CFG_DONE will never be 1.
If continue to init phy like before, it can work as before.
iperf test result good too.

Fixes: 0c80cdbf3320 ("e1000e: Warn if disabling ULP failed")
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ibmvnic: Fix IRQ mapping disposal in error path

RX queue IRQ mappings are disposed in both the TX IRQ and RX IRQ
error paths. Fix this and dispose of TX IRQ mappings correctly in
case of an error.

Fixes: ea22d51a7831 ("ibmvnic: simplify and improve driver probe function")
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'mlxsw-fixes'

Ido Schimmel says:

====================
mlxsw fixes

This patch set contains various fixes for mlxsw.

Patches #1-#2 fix two trap related issues introduced in previous cycle.

Patches #3-#5 fix rare use-after-frees discovered by syzkaller. After
over a week of fuzzing with the fixes, the bugs did not reproduce.

Patch #6 from Amit fixes an issue in the ethtool selftest that was
recently discovered after running the test on a new platform that
supports only 1Gbps and 10Gbps speeds.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: ethtool: Fix test when only two speeds are supported

The test case check_highest_speed_is_chosen() configures $h1 to
advertise a subset of its supported speeds and checks that $h2 chooses
the highest speed from the subset.

To find the common advertised speeds between $h1 and $h2,
common_speeds_get() is called.

Currently, the first speed returned from common_speeds_get() is removed
claiming "h1 does not advertise this speed". The claim is wrong because
the function is called after $h1 already advertised a subset of speeds.

In case $h1 supports only two speeds, it will advertise a single speed
which will be later removed because of previously mentioned bug. This
results in the test needlessly failing. When more than two speeds are
supported this is not an issue because the first advertised speed
is the lowest one.

Fix this by not removing any speed from the list of commonly advertised
speeds.

Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test")
Reported-by: Danielle Ratson <danieller@mellanox.com>
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum_router: Fix use-after-free in router init / de-init

Several notifiers are registered as part of router initialization.
Since some of these notifiers are registered before the end of the
initialization, it is possible for them to access uninitialized or freed
memory when processing notifications [1].

Additionally, some of these notifiers queue work items on a workqueue.
If these work items are executed after the router was de-initialized,
they will access freed memory.

Fix both problems by moving the registration of the notifiers to the end
of the router initialization and flush the work queue after they are
unregistered.

[1]
BUG: KASAN: use-after-free in __mutex_lock_common kernel/locking/mutex.c:938 [inline]
BUG: KASAN: use-after-free in __mutex_lock+0xeea/0x1340 kernel/locking/mutex.c:1103
Read of size 8 at addr ffff888038c3a6e0 by task kworker/u4:1/61

CPU: 1 PID: 61 Comm: kworker/u4:1 Not tainted 5.8.0-rc2+ #36
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Workqueue: mlxsw_core_ordered mlxsw_sp_inet6addr_event_work
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xf6/0x16e lib/dump_stack.c:118
print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383
__kasan_report mm/kasan/report.c:513 [inline]
kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
__mutex_lock_common kernel/locking/mutex.c:938 [inline]
__mutex_lock+0xeea/0x1340 kernel/locking/mutex.c:1103
mlxsw_sp_inet6addr_event_work+0xb3/0x1b0 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:7123
process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269
worker_thread+0x9e/0x1050 kernel/workqueue.c:2415
kthread+0x355/0x470 kernel/kthread.c:291
ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293

Allocated by task 1298:
save_stack+0x1b/0x40 mm/kasan/common.c:48
set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc mm/kasan/common.c:494 [inline]
__kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467
kmalloc include/linux/slab.h:555 [inline]
kzalloc include/linux/slab.h:669 [inline]
mlxsw_sp_router_init+0xb2/0x1d20 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:8074
mlxsw_sp_init+0xbd8/0x3ac0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2932
__mlxsw_core_bus_device_register+0x657/0x10d0 drivers/net/ethernet/mellanox/mlxsw/core.c:1375
mlxsw_core_bus_device_register drivers/net/ethernet/mellanox/mlxsw/core.c:1436 [inline]
mlxsw_devlink_core_bus_device_reload_up+0xcd/0x150 drivers/net/ethernet/mellanox/mlxsw/core.c:1133
devlink_reload net/core/devlink.c:2959 [inline]
devlink_reload+0x281/0x3b0 net/core/devlink.c:2944
devlink_nl_cmd_reload+0x2f1/0x7c0 net/core/devlink.c:2987
genl_family_rcv_msg_doit net/netlink/genetlink.c:691 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:736 [inline]
genl_rcv_msg+0x611/0x9d0 net/netlink/genetlink.c:753
netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469
genl_rcv+0x24/0x40 net/netlink/genetlink.c:764
netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329
netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0x150/0x190 net/socket.c:672
____sys_sendmsg+0x6d8/0x840 net/socket.c:2363
___sys_sendmsg+0xff/0x170 net/socket.c:2417
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2450
do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 1348:
save_stack+0x1b/0x40 mm/kasan/common.c:48
set_track mm/kasan/common.c:56 [inline]
kasan_set_free_info mm/kasan/common.c:316 [inline]
__kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455
slab_free_hook mm/slub.c:1474 [inline]
slab_free_freelist_hook mm/slub.c:1507 [inline]
slab_free mm/slub.c:3072 [inline]
kfree+0xe6/0x320 mm/slub.c:4063
mlxsw_sp_fini+0x340/0x4e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3132
mlxsw_core_bus_device_unregister+0x16c/0x6d0 drivers/net/ethernet/mellanox/mlxsw/core.c:1474
mlxsw_devlink_core_bus_device_reload_down+0x8e/0xc0 drivers/net/ethernet/mellanox/mlxsw/core.c:1123
devlink_reload+0xc6/0x3b0 net/core/devlink.c:2952
devlink_nl_cmd_reload+0x2f1/0x7c0 net/core/devlink.c:2987
genl_family_rcv_msg_doit net/netlink/genetlink.c:691 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:736 [inline]
genl_rcv_msg+0x611/0x9d0 net/netlink/genetlink.c:753
netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469
genl_rcv+0x24/0x40 net/netlink/genetlink.c:764
netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329
netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0x150/0x190 net/socket.c:672
____sys_sendmsg+0x6d8/0x840 net/socket.c:2363
___sys_sendmsg+0xff/0x170 net/socket.c:2417
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2450
do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359
entry_SYSCALL_64_after_hwframe+0x44/0xa9

The buggy address belongs to the object at ffff888038c3a000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1760 bytes inside of
2048-byte region [ffff888038c3a000, ffff888038c3a800)
The buggy address belongs to the page:
page:ffffea0000e30e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 head:ffffea0000e30e00 order:3 compound_mapcount:0 compound_pincount:0
flags: 0x100000000010200(slab|head)
raw: 0100000000010200 dead000000000100 dead000000000122 ffff88806c40c000
raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff888038c3a580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888038c3a600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888038c3a680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888038c3a700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888038c3a780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: 965fa8e600d2 ("mlxsw: spectrum_router: Make RIF deletion more robust")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: core: Free EMAD transactions using kfree_rcu()

The lifetime of EMAD transactions (i.e., 'struct mlxsw_reg_trans') is
managed using RCU. They are freed using kfree_rcu() once the transaction
ends.

However, in case the transaction failed it is freed immediately after being
removed from the active transactions list. This is problematic because it is
still possible for a different CPU to dereference the transaction from an RCU
read-side critical section while traversing the active transaction list in
mlxsw_emad_rx_listener_func(). In which case, a use-after-free is triggered
[1].

Fix this by freeing the transaction after a grace period by calling
kfree_rcu().

[1]
BUG: KASAN: use-after-free in mlxsw_emad_rx_listener_func+0x969/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:671
Read of size 8 at addr ffff88800b7964e8 by task syz-executor.2/2881

CPU: 0 PID: 2881 Comm: syz-executor.2 Not tainted 5.8.0-rc4+ #44
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xf6/0x16e lib/dump_stack.c:118
print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383
__kasan_report mm/kasan/report.c:513 [inline]
kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
mlxsw_emad_rx_listener_func+0x969/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:671
mlxsw_core_skb_receive+0x571/0x700 drivers/net/ethernet/mellanox/mlxsw/core.c:2061
mlxsw_pci_cqe_rdq_handle drivers/net/ethernet/mellanox/mlxsw/pci.c:595 [inline]
mlxsw_pci_cq_tasklet+0x12a6/0x2520 drivers/net/ethernet/mellanox/mlxsw/pci.c:651
tasklet_action_common.isra.0+0x13f/0x3e0 kernel/softirq.c:550
__do_softirq+0x223/0x964 kernel/softirq.c:292
asm_call_on_stack+0x12/0x20 arch/x86/entry/entry_64.S:711
</IRQ>
__run_on_irqstack arch/x86/include/asm/irq_stack.h:22 [inline]
run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:48 [inline]
do_softirq_own_stack+0x109/0x140 arch/x86/kernel/irq_64.c:77
invoke_softirq kernel/softirq.c:387 [inline]
__irq_exit_rcu kernel/softirq.c:417 [inline]
irq_exit_rcu+0x16f/0x1a0 kernel/softirq.c:429
sysvec_apic_timer_interrupt+0x4e/0xd0 arch/x86/kernel/apic/apic.c:1091
asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:587
RIP: 0010:arch_local_irq_restore arch/x86/include/asm/irqflags.h:85 [inline]
RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160 [inline]
RIP: 0010:_raw_spin_unlock_irqrestore+0x3b/0x40 kernel/locking/spinlock.c:191
Code: e8 2a c3 f4 fc 48 89 ef e8 12 96 f5 fc f6 c7 02 75 11 53 9d e8 d6 db 11 fd 65 ff 0d 1f 21 b3 56 5b 5d c3 e8 a7 d7 11 fd 53 9d <eb> ed 0f 1f 00 55 48 89 fd 65 ff 05 05 21 b3 56 ff 74 24 08 48 8d
RSP: 0018:ffff8880446ffd80 EFLAGS: 00000286
RAX: 0000000000000006 RBX: 0000000000000286 RCX: 0000000000000006
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffa94ecea9
RBP: ffff888012934408 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: fffffbfff57be301 R12: 1ffff110088dffc1
R13: ffff888037b817c0 R14: ffff88802442415a R15: ffff888024424000
__do_sys_perf_event_open+0x1b5d/0x2bd0 kernel/events/core.c:11874
do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:384
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x473dbd
Code: Bad RIP value.
RSP: 002b:00007f21e5e9cc28 EFLAGS: 00000246 ORIG_RAX: 000000000000012a
RAX: ffffffffffffffda RBX: 000000000057bf00 RCX: 0000000000473dbd
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000040
RBP: 000000000057bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000003 R11: 0000000000000246 R12: 000000000057bf0c
R13: 00007ffd0493503f R14: 00000000004d0f46 R15: 00007f21e5e9cd80

Allocated by task 871:
save_stack+0x1b/0x40 mm/kasan/common.c:48
set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc mm/kasan/common.c:494 [inline]
__kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467
kmalloc include/linux/slab.h:555 [inline]
kzalloc include/linux/slab.h:669 [inline]
mlxsw_core_reg_access_emad+0x70/0x1410 drivers/net/ethernet/mellanox/mlxsw/core.c:1812
mlxsw_core_reg_access+0xeb/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1991
mlxsw_sp_port_get_hw_xstats+0x335/0x7e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1130
update_stats_cache+0xf4/0x140 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1173
process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269
worker_thread+0x9e/0x1050 kernel/workqueue.c:2415
kthread+0x355/0x470 kernel/kthread.c:291
ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293

Freed by task 871:
save_stack+0x1b/0x40 mm/kasan/common.c:48
set_track mm/kasan/common.c:56 [inline]
kasan_set_free_info mm/kasan/common.c:316 [inline]
__kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455
slab_free_hook mm/slub.c:1474 [inline]
slab_free_freelist_hook mm/slub.c:1507 [inline]
slab_free mm/slub.c:3072 [inline]
kfree+0xe6/0x320 mm/slub.c:4052
mlxsw_core_reg_access_emad+0xd45/0x1410 drivers/net/ethernet/mellanox/mlxsw/core.c:1819
mlxsw_core_reg_access+0xeb/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1991
mlxsw_sp_port_get_hw_xstats+0x335/0x7e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1130
update_stats_cache+0xf4/0x140 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1173
process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269
worker_thread+0x9e/0x1050 kernel/workqueue.c:2415
kthread+0x355/0x470 kernel/kthread.c:291
ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293

The buggy address belongs to the object at ffff88800b796400
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 232 bytes inside of
512-byte region [ffff88800b796400, ffff88800b796600)
The buggy address belongs to the page:
page:ffffea00002de500 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 head:ffffea00002de500 order:2 compound_mapcount:0 compound_pincount:0
flags: 0x100000000010200(slab|head)
raw: 0100000000010200 dead000000000100 dead000000000122 ffff88806c402500
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff88800b796380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88800b796400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88800b796480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88800b796500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88800b796580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: caf7297e7ab5 ("mlxsw: core: Introduce support for asynchronous EMAD register access")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: core: Increase scope of RCU read-side critical section

The lifetime of the Rx listener item ('rxl_item') is managed using RCU,
but is dereferenced outside of RCU read-side critical section, which can
lead to a use-after-free.

Fix this by increasing the scope of the RCU read-side critical section.

Fixes: 93c1edb27f9e ("mlxsw: Introduce Mellanox switch driver core")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum: Use different trap group for externally routed packets

Cited commit mistakenly removed the trap group for externally routed
packets (e.g., via the management interface) and grouped locally routed
and externally routed packet traps under the same group, thereby
subjecting them to the same policer.

This can result in problems, for example, when FRR is restarted and
suddenly all transient traffic is trapped to the CPU because of a
default route through the management interface. Locally routed packets
required to re-establish a BGP connection will never reach the CPU and
the routing tables will not be re-populated.

Fix this by using a different trap group for externally routed packets.

Fixes: 8110668ecd9a ("mlxsw: spectrum_trap: Register layer 3 control traps")
Reported-by: Alex Veber <alexve@mellanox.com>
Tested-by: Alex Veber <alexve@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum_router: Allow programming link-local host routes

Cited commit added the ability to program link-local prefix routes to
the ASIC so that relevant packets are routed and trapped correctly.

However, host routes were not included in the change and thus not
programmed to the ASIC. This can result in packets being trapped via an
external route trap instead of a local route trap as in IPv4.

Fix this by programming all the link-local routes to the ASIC.

Fixes: 10d3757fcb07 ("mlxsw: spectrum_router: Allow programming link-local prefix routes")
Reported-by: Alex Veber <alexve@mellanox.com>
Tested-by: Alex Veber <alexve@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Silence suspicious RCU usage warning

fib_trie_unmerge() is called with RTNL held, but not from an RCU
read-side critical section. This leads to the following warning [1] when
the FIB alias list in a leaf is traversed with
hlist_for_each_entry_rcu().

Since the function is always called with RTNL held and since
modification of the list is protected by RTNL, simply use
hlist_for_each_entry() and silence the warning.

[1]
WARNING: suspicious RCU usage
5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Not tainted
-----------------------------
net/ipv4/fib_trie.c:1867 RCU-list traversed in non-reader section!!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/164:
#0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0

stack backtrace:
CPU: 0 PID: 164 Comm: ip Not tainted 5.8.0-rc4-custom-01520-gc1f937f3f83b #30
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack+0x100/0x184
lockdep_rcu_suspicious+0x153/0x15d
fib_trie_unmerge+0x608/0xdb0
fib_unmerge+0x44/0x360
fib4_rule_configure+0xc8/0xad0
fib_nl_newrule+0x37a/0x1dd0
rtnetlink_rcv_msg+0x4f7/0xbd0
netlink_rcv_skb+0x17a/0x480
rtnetlink_rcv+0x22/0x30
netlink_unicast+0x5ae/0x890
netlink_sendmsg+0x98a/0xf40
____sys_sendmsg+0x879/0xa00
___sys_sendmsg+0x122/0x190
__sys_sendmsg+0x103/0x1d0
__x64_sys_sendmsg+0x7d/0xb0
do_syscall_64+0x54/0xa0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fc80a234e97
Code: Bad RIP value.
RSP: 002b:00007ffef8b66798 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc80a234e97
RDX: 0000000000000000 RSI: 00007ffef8b66800 RDI: 0000000000000003
RBP: 000000005f141b1c R08: 0000000000000001 R09: 0000000000000000
R10: 00007fc80a2a8ac0 R11: 0000000000000246 R12: 0000000000000001
R13: 0000000000000000 R14: 00007ffef8b67008 R15: 0000556fccb10020

Fixes: 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vxlan: Ensure FDB dump is performed under RCU

The commit cited below removed the RCU read-side critical section from
rtnl_fdb_dump() which means that the ndo_fdb_dump() callback is invoked
without RCU protection.

This results in the following warning [1] in the VXLAN driver, which
relied on the callback being invoked from an RCU read-side critical
section.

Fix this by calling rcu_read_lock() in the VXLAN driver, as already done
in the bridge driver.

[1]
WARNING: suspicious RCU usage
5.8.0-rc4-custom-01521-g481007553ce6 #29 Not tainted
-----------------------------
drivers/net/vxlan.c:1379 RCU-list traversed in non-reader section!!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by bridge/166:
#0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xea/0x1090

stack backtrace:
CPU: 1 PID: 166 Comm: bridge Not tainted 5.8.0-rc4-custom-01521-g481007553ce6 #29
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack+0x100/0x184
lockdep_rcu_suspicious+0x153/0x15d
vxlan_fdb_dump+0x51e/0x6d0
rtnl_fdb_dump+0x4dc/0xad0
netlink_dump+0x540/0x1090
__netlink_dump_start+0x695/0x950
rtnetlink_rcv_msg+0x802/0xbd0
netlink_rcv_skb+0x17a/0x480
rtnetlink_rcv+0x22/0x30
netlink_unicast+0x5ae/0x890
netlink_sendmsg+0x98a/0xf40
__sys_sendto+0x279/0x3b0
__x64_sys_sendto+0xe6/0x1a0
do_syscall_64+0x54/0xa0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fe14fa2ade0
Code: Bad RIP value.
RSP: 002b:00007fff75bb5b88 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00005614b1ba0020 RCX: 00007fe14fa2ade0
RDX: 000000000000011c RSI: 00007fff75bb5b90 RDI: 0000000000000003
RBP: 00007fff75bb5b90 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00005614b1b89160
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

Fixes: 5e6d24358799 ("bridge: netlink dump interface at par with brctl")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation: bareudp: Corrected description of bareudp module.

Removed redundant words.

Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Martin Varghese <martin.varghese@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bareudp: forbid mixing IP and MPLS in multiproto mode

In multiproto mode, bareudp_xmit() accepts sending multicast MPLS and
IPv6 packets regardless of the bareudp ethertype. In practice, this
let an IP tunnel send multicast MPLS packets, or an MPLS tunnel send
IPv6 packets.

We need to restrict the test further, so that the multiproto mode only
enables
* IPv6 for IPv4 tunnels,
* or multicast MPLS for unicast MPLS tunnels.

To improve clarity, the protocol validation is moved to its own
function, where each logical test has its own condition.

v2: s/ntohs/htons/

Fixes: 4b5f67232d95 ("net: Special handling for IP & MPLS.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Fix nexthop refcnt leak when creating ipv6 route info

ip6_route_info_create() invokes nexthop_get(), which increases the
refcount of the "nh".

When ip6_route_info_create() returns, local variable "nh" becomes
invalid, so the refcount should be decreased to keep refcount balanced.

The reference counting issue happens in one exception handling path of
ip6_route_info_create(). When nexthops can not be used with source
routing, the function forgets to decrease the refcnt increased by
nexthop_get(), causing a refcnt leak.

Fix this issue by pulling up the error source routing handling when
nexthops can not be used with source routing.

Fixes: f88d8ea67fbd ("ipv6: Plumb support for nexthop object in a fib6_info")
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'Fix-bugs-in-Octeontx2-netdev-driver'

Subbaraya Sundeep says:

====================
Fix bugs in Octeontx2 netdev driver

There are problems in the existing Octeontx2
netdev drivers like missing cancel_work for the
reset task, missing lock in reset task and
missing unergister_netdev in driver remove.
This patch set fixes the above problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-pf: Unregister netdev at driver remove

Added unregister_netdev in the driver remove
function. Generally unregister_netdev is called
after disabling all the device interrupts but here
it is called before disabling device mailbox
interrupts. The reason behind this is VF needs
mailbox interrupt to communicate with its PF to
clean up its resources during otx2_stop.
otx2_stop disables packet I/O and queue interrupts
first and by using mailbox interrupt communicates
to PF to free VF resources. Hence this patch
calls unregister_device just before
disabling mailbox interrupts.

Fixes: 3184fb5ba96e ("octeontx2-vf: Virtual function driver support")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-pf: cancel reset_task work

During driver exit cancel the queued
reset_task work in VF driver.

Fixes: 3184fb5ba96e ("octeontx2-vf: Virtual function driver support")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

octeontx2-pf: Fix reset_task bugs

Two bugs exist in the code related to reset_task
in PF driver one is the missing protection
against network stack ndo_open and ndo_close.
Other one is the missing cancel_work.
This patch fixes those problems.

Fixes: 4ff7d1488a84 ("octeontx2-pf: Error handling support")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlx4: disable device on shutdown

It appears that not disabling a PCI device on .shutdown may lead to
a Hardware Error with particular (perhaps buggy) BIOS versions:

    mlx4_en: eth0: Close port called
    mlx4_en 0000:04:00.0: removed PHC
    reboot: Restarting system
    {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
    {1}[Hardware Error]: event severity: fatal
    {1}[Hardware Error]:  Error 0, type: fatal
    {1}[Hardware Error]:   section_type: PCIe error
    {1}[Hardware Error]:   port_type: 4, root port
    {1}[Hardware Error]:   version: 1.16
    {1}[Hardware Error]:   command: 0x4010, status: 0x0143
    {1}[Hardware Error]:   device_id: 0000:00:02.2
    {1}[Hardware Error]:   slot: 0
    {1}[Hardware Error]:   secondary_bus: 0x04
    {1}[Hardware Error]:   vendor_id: 0x8086, device_id: 0x2f06
    {1}[Hardware Error]:   class_code: 000604
    {1}[Hardware Error]:   bridge: secondary_status: 0x2000, control: 0x0003
    {1}[Hardware Error]:   aer_uncor_status: 0x00100000, aer_uncor_mask: 0x00000000
    {1}[Hardware Error]:   aer_uncor_severity: 0x00062030
    {1}[Hardware Error]:   TLP Header: 40000018 040000ff 791f4080 00000000
[hw error repeats]
    Kernel panic - not syncing: Fatal hardware error!
    CPU: 0 PID: 2189 Comm: reboot Kdump: loaded Not tainted 5.6.x-blabla #1
    Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 05/05/2017

Fix the mlx4 driver.

This is a very similar problem to what had been fixed in:
commit 0d98ba8d70b0 ("scsi: hpsa: disable device during shutdown")
to address https://bugzilla.kernel.org/show_bug.cgi?id=199779.

Fixes: 2ba5fbd62b25 ("net/mlx4_core: Handle AER flow properly")
Reported-by: Jake Lawrence <lawja@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'rhashtable-Fix-unprotected-RCU-dereference-in-__rht_ptr'

Herbert Xu says:

====================
rhashtable: Fix unprotected RCU dereference in __rht_ptr

This patch series fixes an unprotected dereference in __rht_ptr.
The first patch is a minimal fix that does not use the correct
RCU markings but is suitable for backport, and the second patch
cleans up the RCU markings.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

rhashtable: Restore RCU marking on rhash_lock_head

This patch restores the RCU marking on bucket_table->buckets as
it really does need RCU protection. Its removal had led to a fatal
bug.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

rhashtable: Fix unprotected RCU dereference in __rht_ptr

The rcu_dereference call in rht_ptr_rcu is completely bogus because
we've already dereferenced the value in __rht_ptr and operated on it.
This causes potential double readings which could be fatal. The RCU
dereference must occur prior to the comparison in __rht_ptr.

This patch changes the order of RCU dereference so that it is done
first and the result is then fed to __rht_ptr. The RCU marking
changes have been minimised using casts which will be removed in
a follow-up patch.

Fixes: ba6306e3f648 ("rhashtable: Remove RCU marking from...")
Reported-by: "Gong, Sishuai" <sishuai@purdue.edu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: mtk_eth_soc: Always call mtk_gmac0_rgmii_adjust() for mt7623

Modify mtk_gmac0_rgmii_adjust() so it can always be called.
mtk_gmac0_rgmii_adjust() sets-up the TRGMII clocks.

Signed-off-by: René van Dorst <opensource@vdorst.com>
Signed-off-By: David Woodhouse <dwmw2@infradead.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mlx5-fixes-2020-07-28' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5 fixes-2020-07-28

This series introduces some fixes to mlx5 driver.
v1->v2:
- Drop the "Hold reference on mirred devices" patch, until Or's
comments are addressed.
- Imporve "Modify uplink state" patch commit message per Or's request.

Please pull and let me know if there is any problem.

For -Stable:

For -stable v4.9
('net/mlx5e: Fix error path of device attach')

For -stable v4.15
('net/mlx5: Verify Hardware supports requested ptp function on a given
pin')

For -stable v5.3
('net/mlx5e: Modify uplink state on interface up/down')

For -stable v5.4
('net/mlx5e: Fix kernel crash when setting vf VLANID on a VF dev')
('net/mlx5: E-switch, Destroy TSAR when fail to enable the mode')

For -stable v5.5
('net/mlx5: E-switch, Destroy TSAR after reload interface')

For -stable v5.7
('net/mlx5: Fix a bug of using ptp channel index as pin index')
====================

Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-lan78xx-fix-NULL-deref-and-memory-leak'

Johan Hovold says:

====================
net: lan78xx: fix NULL deref and memory leak

The first two patches fix a NULL-pointer dereference at probe that can
be triggered by a malicious device and a small transfer-buffer memory
leak, respectively.

For another subsystem I would have marked them:

Cc: stable@vger.kernel.org # 4.3
The third one replaces the driver's current broken endpoint lookup
helper, which could end up accepting incomplete interfaces and whose
results weren't even useeren
Johan
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: lan78xx: replace bogus endpoint lookup

Drop the bogus endpoint-lookup helper which could end up accepting
interfaces based on endpoints belonging to unrelated altsettings.

Note that the returned bulk pipes and interrupt endpoint descriptor
were never actually used. Instead the bulk-endpoint numbers are
hardcoded to 1 and 2 (matching the specification), while the interrupt-
endpoint descriptor was assumed to be the third descriptor created by
USB core.

Try to bring some order to this by dropping the bogus lookup helper and
adding the missing endpoint sanity checks while keeping the interrupt-
descriptor assumption for now.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: lan78xx: fix transfer-buffer memory leak

The interrupt URB transfer-buffer was never freed on disconnect or after
probe errors.

Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: lan78xx: add missing endpoint sanity check

Add the missing endpoint sanity check to prevent a NULL-pointer
dereference should a malicious device lack the expected endpoints.

Note that the driver has a broken endpoint-lookup helper,
lan78xx_get_endpoints(), which can end up accepting interfaces in an
altsetting without endpoints as long as *some* altsetting has a bulk-in
and a bulk-out endpoint.

Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

usb: hso: check for return value in hso_serial_common_create()

in case of an error tty_register_device_attr() returns ERR_PTR(),
add IS_ERR() check

Reported-and-tested-by: syzbot+67b2bd0e34f952d0321e@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=67b2bd0e34f952d0321e
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5e: Fix kernel crash when setting vf VLANID on a VF dev

After the cited commit, function 'mlx5_eswitch_set_vport_vlan' started
to acquire esw->state_lock.
However, esw is not defined for VF devices, hence attempting to set vf
VLANID on a VF dev will cause a kernel panic.

Fix it by moving up the (redundant) esw validation from function
'__mlx5_eswitch_set_vport_vlan' since the rest of the callers now have
and use a valid esw.

For example with vf device eth4:
# ip link set dev eth4 vf 0 vlan 0

Trace of the panic:
[  411.409842] BUG: unable to handle page fault for address: 00000000000011b8
[  411.449745] #PF: supervisor read access in kernel mode
[  411.452348] #PF: error_code(0x0000) - not-present page
[  411.454938] PGD 80000004189c9067 P4D 80000004189c9067 PUD 41899a067 PMD 0
[  411.458382] Oops: 0000 [#1] SMP PTI
[  411.460268] CPU: 4 PID: 5711 Comm: ip Not tainted 5.8.0-rc4_for_upstream_min_debug_2020_07_08_22_04 #1
[  411.462447] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[  411.464158] RIP: 0010:__mutex_lock+0x4e/0x940
[  411.464928] Code: fd 41 54 49 89 f4 41 52 53 89 d3 48 83 ec 70 44 8b 1d ee 03 b0 01 65 48 8b 04 25 28 00 00 00 48 89 45 c8 31 c0 45 85 db 75 0a <48> 3b 7f 60 0f 85 7e 05 00 00 49 8d 45 68 41 56 41 b8 01 00 00 00
[  411.467678] RSP: 0018:ffff88841fcd74b0 EFLAGS: 00010246
[  411.468562] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[  411.469715] RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000001158
[  411.470812] RBP: ffff88841fcd7550 R08: ffffffffa00fa1ce R09: 0000000000000000
[  411.471835] R10: ffff88841fcd7570 R11: 0000000000000000 R12: 0000000000000002
[  411.472862] R13: 0000000000001158 R14: ffffffffa00fa1ce R15: 0000000000000000
[  411.474004] FS:  00007faee7ca6b80(0000) GS:ffff88846fc00000(0000) knlGS:0000000000000000
[  411.475237] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  411.476129] CR2: 00000000000011b8 CR3: 000000041909c006 CR4: 0000000000360ea0
[  411.477260] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  411.478340] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  411.479332] Call Trace:
[  411.479760]  ? __nla_validate_parse.part.6+0x57/0x8f0
[  411.482825]  ? mlx5_eswitch_set_vport_vlan+0x3e/0xa0 [mlx5_core]
[  411.483804]  mlx5_eswitch_set_vport_vlan+0x3e/0xa0 [mlx5_core]
[  411.484733]  mlx5e_set_vf_vlan+0x41/0x50 [mlx5_core]
[  411.485545]  do_setlink+0x613/0x1000
[  411.486165]  __rtnl_newlink+0x53d/0x8c0
[  411.486791]  ? mark_held_locks+0x49/0x70
[  411.487429]  ? __lock_acquire+0x8fe/0x1eb0
[  411.488085]  ? rcu_read_lock_sched_held+0x52/0x60
[  411.488998]  ? kmem_cache_alloc_trace+0x16d/0x2d0
[  411.489759]  rtnl_newlink+0x47/0x70
[  411.490357]  rtnetlink_rcv_msg+0x24e/0x450
[  411.490978]  ? netlink_deliver_tap+0x92/0x3d0
[  411.491631]  ? validate_linkmsg+0x330/0x330
[  411.492262]  netlink_rcv_skb+0x47/0x110
[  411.492852]  netlink_unicast+0x1ac/0x270
[  411.493551]  netlink_sendmsg+0x336/0x450
[  411.494209]  sock_sendmsg+0x30/0x40
[  411.494779]  ____sys_sendmsg+0x1dd/0x1f0
[  411.495378]  ? copy_msghdr_from_user+0x5c/0x90
[  411.496082]  ___sys_sendmsg+0x87/0xd0
[  411.496683]  ? lock_acquire+0xb9/0x3a0
[  411.497322]  ? lru_cache_add+0x5/0x170
[  411.497944]  ? find_held_lock+0x2d/0x90
[  411.498568]  ? handle_mm_fault+0xe46/0x18c0
[  411.499205]  ? __sys_sendmsg+0x51/0x90
[  411.499784]  __sys_sendmsg+0x51/0x90
[  411.500341]  do_syscall_64+0x59/0x2e0
[  411.500938]  ? asm_exc_page_fault+0x8/0x30
[  411.501609]  ? rcu_read_lock_sched_held+0x52/0x60
[  411.502350]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  411.503093] RIP: 0033:0x7faee73b85a7
[  411.503654] Code: Bad RIP value.

Fixes: 0e18134f4f9f ("net/mlx5e: Eswitch, use state_lock to synchronize vlan change")
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Modify uplink state on interface up/down

When setting the PF interface up/down, notify the firmware to update
uplink state via MODIFY_VPORT_STATE, when E-Switch is enabled.

This behavior will prevent sending traffic out on uplink port when PF is
down, such as sending traffic from a VF interface which is still up.
Currently when calling mlx5e_open/close(), the driver only sends PAOS
command to notify the firmware to set the physical port state to
up/down, however, it is not sufficient. When VF is in "auto" state, it
follows the uplink state, which was not updated on mlx5e_open/close()
before this patch.

When switchdev mode is enabled and uplink representor is first enabled,
set the uplink port state value back to its FW default "AUTO".

Fixes: 63bfd399de55 ("net/mlx5e: Send PAOS command on interface up/down")
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Query PPS pin operational status before registering it

In a special configuration, a ConnectX6-Dx pin pps-out might be activated
when driver is loaded. Fix the driver to always read the operational pin
mode when registering it, and advertise it accordingly.

Fixes: ee7f12205abc ("net/mlx5e: Implement 1PPS support")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Fix slab-out-of-bounds in mlx5e_rep_is_lag_netdev

mlx5e_rep_is_lag_netdev is used as first check as part of netdev events
handler for bond device of non-uplink representors, this handler can get
any netdevice under the same network namespace of mlx5e netdevice. Current
code treats the netdev as mlx5e netdev and only later on verifies this,
hence causes the following Kasan trace:
[15402.744990] ==================================================================
[15402.746942] BUG: KASAN: slab-out-of-bounds in mlx5e_rep_is_lag_netdev+0xcb/0xf0 [mlx5_core]
[15402.749009] Read of size 8 at addr ffff880391f3f6b0 by task ovs-vswitchd/5347

[15402.752065] CPU: 7 PID: 5347 Comm: ovs-vswitchd Kdump: loaded Tainted: G    B      O     --------- -t - 4.18.0-g3dcc204d291d-dirty #1
[15402.755349] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[15402.757600] Call Trace:
[15402.758968]  dump_stack+0x71/0xab
[15402.760427]  print_address_description+0x6a/0x270
[15402.761969]  kasan_report+0x179/0x2d0
[15402.763445]  ? mlx5e_rep_is_lag_netdev+0xcb/0xf0 [mlx5_core]
[15402.765121]  mlx5e_rep_is_lag_netdev+0xcb/0xf0 [mlx5_core]
[15402.766782]  mlx5e_rep_esw_bond_netevent+0x129/0x620 [mlx5_core]

Fix by deferring the violating access to be post the netdev verify check.

Fixes: 7e51891a237f ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule")
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Verify Hardware supports requested ptp function on a given pin

Fix a bug where driver did not verify Hardware pin capabilities for
PTP functions.

Fixes: ee7f12205abc ("net/mlx5e: Implement 1PPS support")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Fix a bug of using ptp channel index as pin index

On PTP mlx5_ptp_enable(on=0) flow, driver mistakenly used channel index
as pin index.

After ptp patch marked in fixes tag was introduced, driver can freely
call ptp_find_pin() as part of the .enable() callback.

Fix driver mlx5_ptp_enable(on=0) flow to always use ptp_find_pin(). With
that, Driver will use the correct pin index in mlx5_ptp_enable(on=0) flow.

In addition, when initializing the pins, always set channel to zero. As
all pins can be attached to all channels, let ptp_set_pinfunc() to move
them between the channels.

For stable branches, this fix to be applied only on kernels that includes
both patches in fixes tag. Otherwise, mlx5_ptp_enable(on=0) will be stuck
on pincfg_mux.

Fixes: 62582a7ee783 ("ptp: Avoid deadlocks in the programmable pin code.")
Fixes: ee7f12205abc ("net/mlx5e: Implement 1PPS support")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Fix missing cleanup of ethtool steering during rep rx cleanup

The cited commit add initialization of ethtool steering during
representor rx initializations without cleaning it up in representor
rx cleanup, this may cause for stale ethtool flows to remain after
moving back from switchdev mode to legacy mode.

Fixed by calling ethtool steering cleanup during rep rx cleanup.

Fixes: 6783e8b29f63 ("net/mlx5e: Init ethtool steering for representors")
Signed-off-by: Maor Dickman <maord@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Fix error path of device attach

On failure to attach the netdev, fix the rollback by re-setting the
device's state back to MLX5E_STATE_DESTROYING.

Failing to attach doesn't stop statistics polling via .ndo_get_stats64.
In this case, although the device is not attached, it falsely continues
to query the firmware for counters. Setting the device's state back to
MLX5E_STATE_DESTROYING prevents the firmware counters query.

Fixes: 26e59d8077a3 ("net/mlx5e: Implement mlx5e interface attach/detach callbacks")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Fix forward to next namespace

The steering tree is as follow (nic RX as example):
   ---------
                   |root_ns|
   ---------
|
       --------------------------------
     | |        |
   ----------    ----------      ---------
   |p(prio)0|    |   p1   |      |   pn  |
   ----------    ----------    ---------
        | |
----------------  ---------------
|ns(e.g bypass)|  |ns(e.g. lag) |
----------------  ---------------
  |     |    |
----  ----  ----
|p0|  |p1|  |pn|
----  ----  ----
|
----
|FT|
----

find_next_chained_ft(prio) returns the first flow table in the next
priority. If prio is a parent of a flow table then it returns the first
flow table in the next priority in the same namespace, else if prio
is parent of namespace, then it should return the first flow table
in the next namespace. Currently if the user requests to forward to
next namespace, the code calls to find_next_chained_ft with the prio
of the next namespace and not the prio of the namesapce itself.

Fixes: 9254f8ed15b6 ("net/mlx5: Add support in forward to namespace")
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: E-switch, Destroy TSAR after reload interface

When eswitch offloads is enabled, TSAR is created before reloading
the interfaces.
However when eswitch offloads mode is disabled, TSAR is disabled before
reloading the interfaces.

To keep the eswitch enable/disable sequence as mirror, destroy TSAR
after reloading the interfaces.

Fixes: 1bd27b11c1df ("net/mlx5: Introduce E-switch QoS management")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: E-switch, Destroy TSAR when fail to enable the mode

When either esw_legacy_enable() or esw_offloads_enable() fails,
code missed to destroy the created TSAR.

Hence, add the missing call to destroy the TSAR.

Fixes: 610090ebce92 ("net/mlx5: E-switch, Initialize TSAR Qos hardware block before its user vports")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Merge branch 'hns3-fixes'

Huazhong Tan says:

====================
net: hns3: fixes for -net

There are some bugfixes for the HNS3 ethernet driver. patch#1 fixes
a desc filling bug, patch#2 fixes a false TX timeout issue, and
patch#3~#5 fixes some bugs related to VLAN and FD.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: fix for VLAN config when reset failed

When device is resetting or reset failed, firmware is unable to
handle mailbox. VLAN should not be configured in this case.

Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed")
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: fix aRFS FD rules leftover after add a user FD rule

When user had created a FD rule, all the aRFS rules should be clear up.
HNS3 process flow as below:
1.get spin lock of fd_ruls_list
2.clear up all aRFS rules
3.release lock
4.get spin lock of fd_ruls_list
5.creat a rules
6.release lock;

There is a short period of time between step 3 and step 4, which would
creatting some new aRFS FD rules if driver was receiving packet.
So refactor the fd_rule_lock to fix it.

Fixes: 441228875706 ("net: hns3: refine the flow director handle")
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: add reset check for VF updating port based VLAN

Currently hclgevf_update_port_base_vlan_info() may be called when
VF is resetting, which may cause hns3_nic_net_open() being called
twice unexpectedly.

So fix it by adding a reset check for it, and extend critical
region for rntl_lock in hclgevf_update_port_base_vlan_info().

Fixes: 92f11ea177cd ("net: hns3: fix set port based VLAN issue for VF")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: fix a TX timeout issue

When the queue depth and queue parameters are modified, there is
a low probability that TX timeout occurs. The two operations cause
the link to be down or up when the watchdog is still working. All
queues are stopped when the link is down. After the carrier is on,
all queues are woken up. If the watchdog detects the link between
the carrier on and wakeup queues, a false TX timeout occurs.

So fix this issue by modifying the sequence of carrier on and queue
wakeup, which is symmetrical to the link down action.

Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: fix desc filling bug when skb is expanded or lineared

The linear and frag data part may be changed when the skb is expanded
or lineared in skb_cow_head() or skb_checksum_help(), which is called
by hns3_fill_skb_desc(), so the linear len return by skb_headlen()
before the calling of hns3_fill_skb_desc() is unreliable.

Move hns3_fill_skb_desc() before the calling of skb_headlen() to fix
this bug.

Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fix a braino in cmsghdr_from_user_compat_to_kern()

commit 547ce4cfb34c ("switch cmsghdr_from_user_compat_to_kern() to
copy_from_user()") missed one of the places where ucmlen should've been
replaced with cmsg.cmsg_len, now that we are fetching the entire struct
rather than doing it field-by-field.

As the result, compat sendmsg() with several different-sized cmsg
attached started to fail with EINVAL. Trivial to fix, fortunately.

Fixes: 547ce4cfb34c ("switch cmsghdr_from_user_compat_to_kern() to copy_from_user()")
Reported-by: Nick Bowler <nbowler@draconx.ca>
Tested-by: Nick Bowler <nbowler@draconx.ca>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'selftests-net-Fix-clang-warnings-on-powerpc'

Tanner Love says:

====================
selftests/net: Fix clang warnings on powerpc

This is essentially a v2 of
http://patchwork.ozlabs.org/project/netdev/patch/20200724181757.2331172-1-tannerlove.kernel@gmail.com/,
but it has been split up in order to have only one "Fixes" tag per
patch.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/net: tcp_mmap: fix clang warning for target arch PowerPC

When size_t maps to unsigned int (e.g. on 32-bit powerpc), then the
comparison with 1<<35 is always true. Clang 9 threw:
warning: result of comparison of constant 34359738368 with \
expression of type 'size_t' (aka 'unsigned int') is always true \
[-Wtautological-constant-out-of-range-compare]
while (total < FILE_SZ) {

Tested: make -C tools/testing/selftests TARGETS="net" run_tests

Fixes: 192dc405f308 ("selftests: net: add tcp_mmap program")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/net: so_txtime: fix clang issues for target arch PowerPC

On powerpcle, int64_t maps to long long. Clang 9 threw:
warning: absolute value function 'labs' given an argument of type \
'long long' but has parameter of type 'long' which may cause \
truncation of value [-Wabsolute-value]
if (labs(tstop - texpect) > cfg_variance_us)

Tested: make -C tools/testing/selftests TARGETS="net" run_tests

Fixes: af5136f95045 ("selftests/net: SO_TXTIME with ETF and FQ")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/net: psock_fanout: fix clang issues for target arch PowerPC

Clang 9 threw:
warning: format specifies type 'unsigned short' but the argument has \
type 'int' [-Wformat]
typeflags, PORT_BASE, PORT_BASE + port_off);

Tested: make -C tools/testing/selftests TARGETS="net" run_tests

Fixes: 77f65ebdca50 ("packet: packet fanout rollover during socket overload")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/net: rxtimestamp: fix clang issues for target arch PowerPC

The signedness of char is implementation-dependent. Some systems
(including PowerPC and ARM) use unsigned char. Clang 9 threw:
warning: result of comparison of constant -1 with expression of type \
'char' is always true [-Wtautological-constant-out-of-range-compare]
&arg_index)) != -1) {

Tested: make -C tools/testing/selftests TARGETS="net" run_tests

Fixes: 16e781224198 ("selftests/net: Add a test to validate behavior of rx timestamps")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mscc: ocelot: fix hardware timestamp dequeue logic

The next hw timestamp should be snapshoot to the read registers
only once the current timestamp has been read.
If none of the pending skbs matches the current HW timestamp
just gracefully flush the available timestamp by reading it.

Signed-off-by: laurent brando <laurent.brando@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: fix joined subflows with unblocking sk

Unblocking sockets used for outgoing connections were not containing
inet info about the initial connection due to a typo there: the value of
"err" variable is negative in the kernelspace.

This fixes the creation of additional subflows where the remote port has
to be reused if the other host didn't announce another one. This also
fixes inet_diag showing blank info about MPTCP sockets from unblocking
sockets doing a connect().

Fixes: 41be81a8d3d0 ("mptcp: fix unblocking connect()")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'riscv-for-linus-5.8-rc7' of git://git./linux/kernel/git/riscv/linux into master

Pull RISC-V fixes from Palmer Dabbelt:
"A few more fixes this week:

   - A fix to avoid using SBI calls during kasan initialization, as the
     SBI calls themselves have not been probed yet.

   - Three fixes related to systems with multiple memory regions"

* tag 'riscv-for-linus-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Parse all memory blocks to remove unusable memory
  RISC-V: Do not rely on initrd_start/end computed during early dt parsing
  RISC-V: Set maximum number of mapped pages correctly
  riscv: kasan: use local_tlb_flush_all() to avoid uninitialized __sbi_rfence

Merge tag 'x86-urgent-2020-07-25' of git://git./linux/kernel/git/tip/tip into master

Pull x86 fixes from Ingo Molnar:
"Misc fixes:

   - Fix a section end page alignment assumption that was causing
     crashes

   - Fix ORC unwinding on freshly forked tasks which haven't executed
     yet and which have empty user task stacks

   - Fix the debug.exception-trace=1 sysctl dumping of user stacks,
     which was broken by recent maccess changes"

* tag 'x86-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/dumpstack: Dump user space code correctly again
  x86/stacktrace: Fix reliable check for empty user task stacks
  x86/unwind/orc: Fix ORC for newly forked tasks
  x86, vmlinux.lds: Page-align end of ..page_aligned sections

Merge tag 'perf-urgent-2020-07-25' of git://git./linux/kernel/git/tip/tip into master

Pull uprobe fix from Ingo Molnar:
"Fix an interaction/regression between uprobes based shared library
tracing & GDB"

* tag 'perf-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
uprobes: Change handle_swbp() to send SIGTRAP with si_code=SI_KERNEL, to fix GDB regression

Merge tag 'timers-urgent-2020-07-25' of git://git./linux/kernel/git/tip/tip into master

Pull timer fix from Ingo Molnar:
"Fix a suspend/resume regression (crash) on TI AM3/AM4 SoC's"

* tag 'timers-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4

Merge tag 'sched-urgent-2020-07-25' of git://git./linux/kernel/git/tip/tip into master

Pull scheduler fixes from Ingo Molnar:
"Fix a race introduced by the recent loadavg race fix, plus add a debug
  check for a hard to debug case of bogus wakeup function flags"

* tag 'sched-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Warn if garbage is passed to default_wake_function()
  sched: Fix race against ptrace_freeze_trace()

Merge tag 'efi-urgent-2020-07-25' of git://git./linux/kernel/git/tip/tip into master

Pull EFI fixes from Ingo Molnar:
"Various EFI fixes:

   - Fix the layering violation in the use of the EFI runtime services
     availability mask in users of the 'efivars' abstraction

   - Revert build fix for GCC v4.8 which is no longer supported

   - Clean up some x86 EFI stub details, some of which are borderline
     bugs that copy around garbage into padding fields - let's fix these
     out of caution.

   - Fix build issues while working on RISC-V support

   - Avoid --whole-archive when linking the stub on arm64"

* tag 'efi-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi: Revert "efi/x86: Fix build with gcc 4"
  efi/efivars: Expose RT service availability via efivars abstraction
  efi/libstub: Move the function prototypes to header file
  efi/libstub: Fix gcc error around __umoddi3 for 32 bit builds
  efi/libstub/arm64: link stub lib.a conditionally
  efi/x86: Only copy upto the end of setup_header
  efi/x86: Remove unused variables

Merge tag '5.8-rc6-cifs-fix' of git://git.samba.org/sfrench/cifs-2.6 into master

Pull cifs fix from Steve French:
"A fix for a recently discovered regression in rename to older servers
caused by a recent patch"

* tag '5.8-rc6-cifs-fix' of git://git.samba.org/sfrench/cifs-2.6:
Revert "cifs: Fix the target file was deleted when rename failed."

Merge git://git./linux/kernel/git/netdev/net into master

Pull networking fixes from David Miller:

1) Fix RCU locaking in iwlwifi, from Johannes Berg.

2) mt76 can access uninitialized NAPI struct, from Felix Fietkau.

3) Fix race in updating pause settings in bnxt_en, from Vasundhara
    Volam.

4) Propagate error return properly during unbind failures in ax88172a,
    from George Kennedy.

5) Fix memleak in adf7242_probe, from Liu Jian.

6) smc_drv_probe() can leak, from Wang Hai.

7) Don't muck with the carrier state if register_netdevice() fails in
    the bonding driver, from Taehee Yoo.

8) Fix memleak in dpaa_eth_probe, from Liu Jian.

9) Need to check skb_put_padto() return value in hsr_fill_tag(), from
    Murali Karicheri.

10) Don't lose ionic RSS hash settings across FW update, from Shannon
    Nelson.

11) Fix clobbered SKB control block in act_ct, from Wen Xu.

12) Missing newlink in "tx_timeout" sysfs output, from Xiongfeng Wang.

13) IS_UDPLITE cleanup a long time ago, incorrectly handled
    transformations involving UDPLITE_RECV_CC. From Miaohe Lin.

14) Unbalanced locking in netdevsim, from Taehee Yoo.

15) Suppress false-positive error messages in qed driver, from Alexander
    Lobakin.

16) Out of bounds read in ax25_connect and ax25_sendmsg, from Peilin Ye.

17) Missing SKB release in cxgb4's uld_send(), from Navid Emamdoost.

18) Uninitialized value in geneve_changelink(), from Cong Wang.

19) Fix deadlock in xen-netfront, from Andera Righi.

19) flush_backlog() frees skbs with IRQs disabled, so should use
    dev_kfree_skb_irq() instead of kfree_skb(). From Subash Abhinov
    Kasiviswanathan.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
  drivers/net/wan: lapb: Corrected the usage of skb_cow
  dev: Defer free of skbs in flush_backlog
  qrtr: orphan socket in qrtr_release()
  xen-netfront: fix potential deadlock in xennet_remove()
  flow_offload: Move rhashtable inclusion to the source file
  geneve: fix an uninitialized value in geneve_changelink()
  bonding: check return value of register_netdevice() in bond_newlink()
  tcp: allow at most one TLP probe per flight
  AX.25: Prevent integer overflows in connect and sendmsg
  cxgb4: add missing release on skb in uld_send()
  net: atlantic: fix PTP on AQC10X
  AX.25: Prevent out-of-bounds read in ax25_sendmsg()
  sctp: shrink stream outq when fails to do addstream reconf
  sctp: shrink stream outq only when new outcnt < old outcnt
  AX.25: Fix out-of-bounds read in ax25_connect()
  enetc: Remove the mdio bus on PF probe bailout
  net: ethernet: ti: add NETIF_F_HW_TC hw feature flag for taprio offload
  net: ethernet: ave: Fix error returns in ave_init
  drivers/net/wan/x25_asy: Fix to make it work
  ipvs: fix the connection sync failed in some cases
  ...

riscv: Parse all memory blocks to remove unusable memory

Currently, maximum physical memory allowed is equal to -PAGE_OFFSET.
That's why we remove any memory blocks spanning beyond that size. However,
it is done only for memblock containing linux kernel which will not work
if there are multiple memblocks.

Process all memory blocks to figure out how much memory needs to be removed
and remove at the end instead of updating the memblock list in place.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

RISC-V: Do not rely on initrd_start/end computed during early dt parsing

Currently, initrd_start/end are computed during early_init_dt_scan
but used during arch_setup. We will get the following panic if initrd is used
and CONFIG_DEBUG_VIRTUAL is turned on.

[    0.000000] ------------[ cut here ]------------
[    0.000000] kernel BUG at arch/riscv/mm/physaddr.c:33!
[    0.000000] Kernel BUG [#1]
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-rc4-00015-ged0b226fed02 #886
[    0.000000] epc: ffffffe0002058d2 ra : ffffffe0000053f0 sp : ffffffe001001f40
[    0.000000]  gp : ffffffe00106e250 tp : ffffffe001009d40 t0 : ffffffe00107ee28
[    0.000000]  t1 : 0000000000000000 t2 : ffffffe000a2e880 s0 : ffffffe001001f50
[    0.000000]  s1 : ffffffe0001383e8 a0 : ffffffe00c087e00 a1 : 0000000080200000
[    0.000000]  a2 : 00000000010bf000 a3 : ffffffe00106f3c8 a4 : ffffffe0010bf000
[    0.000000]  a5 : ffffffe000000000 a6 : 0000000000000006 a7 : 0000000000000001
[    0.000000]  s2 : ffffffe00106f068 s3 : ffffffe00106f070 s4 : 0000000080200000
[    0.000000]  s5 : 0000000082200000 s6 : 0000000000000000 s7 : 0000000000000000
[    0.000000]  s8 : 0000000080011010 s9 : 0000000080012700 s10: 0000000000000000
[    0.000000]  s11: 0000000000000000 t3 : 000000000001fe30 t4 : 000000000001fe30
[    0.000000]  t5 : 0000000000000000 t6 : ffffffe00107c471
[    0.000000] status: 0000000000000100 badaddr: 0000000000000000 cause: 0000000000000003
[    0.000000] random: get_random_bytes called from print_oops_end_marker+0x22/0x46 with crng_init=0

To avoid the error, initrd_start/end can be computed from phys_initrd_start/size
in setup itself. It also improves the initrd placement by aligning the start
and size with the page size.

Fixes: 76d2a0493a17 ("RISC-V: Init and Halt Code")
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

drivers/net/wan: lapb: Corrected the usage of skb_cow

This patch fixed 2 issues with the usage of skb_cow in LAPB drivers
"lapbether" and "hdlc_x25":

1) After skb_cow fails, kfree_skb should be called to drop a reference
to the skb. But in both drivers, kfree_skb is not called.

2) skb_cow should be called before skb_push so that is can ensure the
safety of skb_push. But in "lapbether", it is incorrectly called after
skb_push.

More details about these 2 issues:

1) The behavior of calling kfree_skb on failure is also the behavior of
netif_rx, which is called by this function with "return netif_rx(skb);".
So this function should follow this behavior, too.

2) In "lapbether", skb_cow is called after skb_push. This results in 2
logical issues:
   a) skb_push is not protected by skb_cow;
   b) An extra headroom of 1 byte is ensured after skb_push. This extra
      headroom has no use in this function. It also has no use in the
      upper-layer function that this function passes the skb to
      (x25_lapb_receive_frame in net/x25/x25_dev.c).
So logically skb_cow should instead be called before skb_push.

Cc: Eric Dumazet <edumazet@google.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev: Defer free of skbs in flush_backlog

IRQs are disabled when freeing skbs in input queue.
Use the IRQ safe variant to free skbs here.

Fixes: 145dd5f9c88f ("net: flush the softnet backlog in process context")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

RISC-V: Set maximum number of mapped pages correctly

Currently, maximum number of mapper pages are set to the pfn calculated
from the memblock size of the memblock containing kernel. This will work
until that memblock spans the entire memory. However, it will be set to
a wrong value if there are multiple memblocks defined in kernel
(e.g. with efi runtime services).

Set the the maximum value to the pfn calculated from dram size.

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Merge tag 'pci-v5.8-fixes-2' of git://git./linux/kernel/git/helgaas/pci into master

Pull PCI fixes from Bjorn Helgaas:

- Reject invalid IRQ 0 command line argument for virtio_mmio because
   IRQ 0 now generates warnings (Bjorn Helgaas)

- Revert "PCI/PM: Assume ports without DLL Link Active train links in
   100 ms", which broke nouveau (Bjorn Helgaas)

* tag 'pci-v5.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  Revert "PCI/PM: Assume ports without DLL Link Active train links in 100 ms"
  virtio-mmio: Reject invalid IRQ 0 command line argument

qrtr: orphan socket in qrtr_release()

We have to detach sock from socket in qrtr_release(),
otherwise skb->sk may still reference to this socket
when the skb is released in tun->queue, particularly
sk->sk_wq still points to &sock->wq, which leads to
a UAF.

Reported-and-tested-by: syzbot+6720d64f31c081c2f708@syzkaller.appspotmail.com
Fixes: 28fb4e59a47d ("net: qrtr: Expose tunneling endpoint to user space")
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-2020-07-24' of git://git./linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for v5.8

Second set of fixes for v5.8, and hopefully also the last. Three
important regressions fixed.

ath9k

* fix a regression which broke support for all ath9k usb devices

ath10k

* fix a regression which broke support for all QCA4019 AHB devices

iwlwifi

* fix a regression which broke support for some Killer Wireless-AC 1550 cards
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

xen-netfront: fix potential deadlock in xennet_remove()

There's a potential race in xennet_remove(); this is what the driver is
doing upon unregistering a network device:

  1. state = read bus state
  2. if state is not "Closed":
  3.    request to set state to "Closing"
  4.    wait for state to be set to "Closing"
  5.    request to set state to "Closed"
  6.    wait for state to be set to "Closed"

If the state changes to "Closed" immediately after step 1 we are stuck
forever in step 4, because the state will never go back from "Closed" to
"Closing".

Make sure to check also for state == "Closed" in step 4 to prevent the
deadlock.

Also add a 5 sec timeout any time we wait for the bus state to change,
to avoid getting stuck forever in wait_event().

Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'nfsd-5.8-2' of git://linux-nfs.org/~bfields/linux into master

Pull nfsd fix from Bruce Fields:
"Just one fix for a NULL dereference if someone happens to read
/proc/fs/nfsd/client/../state at the wrong moment"

* tag 'nfsd-5.8-2' of git://linux-nfs.org/~bfields/linux:
nfsd4: fix NULL dereference in nfsd/clients display code

flow_offload: Move rhashtable inclusion to the source file

I noticed that touching linux/rhashtable.h causes lib/vsprintf.c to
be rebuilt. This dependency came through a bogus inclusion in the
file net/flow_offload.h. This patch moves it to the right place.

This patch also removes a lingering rhashtable inclusion in cls_api
created by the same commit.

Fixes: 4e481908c51b ("flow_offload: move tc indirect block to...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'akpm' into master (patches from Andrew)

Merge misc fixes from Andrew Morton:
"Subsystems affected by this patch series: mm/pagemap, mm/shmem,
  mm/hotfixes, mm/memcg, mm/hugetlb, mailmap, squashfs, scripts,
  io-mapping, MAINTAINERS, and gdb"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  scripts/gdb: fix lx-symbols 'gdb.error' while loading modules
  MAINTAINERS: add KCOV section
  io-mapping: indicate mapping failure
  scripts/decode_stacktrace: strip basepath from all paths
  squashfs: fix length field overlap check in metadata reading
  mailmap: add entry for Mike Rapoport
  khugepaged: fix null-pointer dereference due to race
  mm/hugetlb: avoid hardcoding while checking if cma is enabled
  mm: memcg/slab: fix memory leak at non-root kmem_cache destroy
  mm/memcg: fix refcount error while moving and swapping
  mm/memcontrol: fix OOPS inside mem_cgroup_get_nr_swap_pages()
  mm: initialize return of vm_insert_pages
  vfs/xattr: mm/shmem: kernfs: release simple xattr entry in a right way
  mm/mmap.c: close race between munmap() and expand_upwards()/downwards()

Merge branch 'fixes' of git://git./linux/kernel/git/viro/vfs into master

Pull xtensa csum regression fix from Al Viro:
"Max Filippov caught a breakage introduced in xtensa this cycle
  by the csum_and_copy_..._user() series.

  Cut'n'paste from the wrong source - the check that belongs
  in csum_and_copy_to_user() ended up both there and in
  csum_and_copy_from_user()"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  xtensa: fix access check in csum_and_copy_from_user

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux into master

Pull arm64 fix from Will Deacon:
"Fix compat vDSO build flags for recent versions of clang to tell it
where to find the assembler"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: vdso32: Fix '--prefix=' value for newer versions of clang

Merge tag 'for-5.8-rc6-tag' of git://git./linux/kernel/git/kdave/linux into master

Pull btrfs fixes from David Sterba:
"A few resouce leak fixes from recent patches, all are stable material.

  The problems have been observed during testing or have a reproducer"

* tag 'for-5.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix mount failure caused by race with umount
  btrfs: fix page leaks after failure to lock page for delalloc
  btrfs: qgroup: fix data leak caused by race between writeback and truncate
  btrfs: fix double free on ulist after backref resolution failure

Merge tag 'zonefs-5.8-rc7' of git://git./linux/kernel/git/dlemoal/zonefs into master

Pull zonefs fixes from Damien Le Moal:
"Two fixes, the first one to remove compilation warnings and the second
  to avoid potentially inefficient allocation of BIOs for direct writes
  into sequential zones"

* tag 'zonefs-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: count pages after truncating the iterator
  zonefs: Fix compilation warning

Merge tag 'io_uring-5.8-2020-07-24' of git://git.kernel.dk/linux-block into master

Pull io_uring fixes from Jens Axboe:

- Fix discrepancy in how sqe->flags are treated for a few requests,
   this makes it consistent (Daniele)

- Ensure that poll driven retry works with double waitqueue poll users

- Fix a missing io_req_init_async() (Pavel)

* tag 'io_uring-5.8-2020-07-24' of git://git.kernel.dk/linux-block:
  io_uring: missed req_init_async() for IOSQE_ASYNC
  io_uring: always allow drain/link/hardlink/async sqe flags
  io_uring: ensure double poll additions work with both request types

Merge tag 'iommu-fix-v5.8-rc6' of git://git./linux/kernel/git/joro/iommu into master

Pull iommu fix from Joerg Roedel:
"Fix a NULL-ptr dereference in the QCOM IOMMU driver"

* tag 'iommu-fix-v5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/qcom: Use domain rather than dev as tlb cookie

Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma into master

Pull rdma fixes from Jason Gunthorpe:
"One merge window regression, some corruption bugs in HNS and a few
  more syzkaller fixes:

   - Two long standing syzkaller races

   - Fix incorrect HW configuration in HNS

   - Restore accidentally dropped locking in IB CM

   - Fix ODP prefetch bug added in the big rework several versions ago"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/mlx5: Prevent prefetch from racing with implicit destruction
  RDMA/cm: Protect access to remote_sidr_table
  RDMA/core: Fix race in rdma_alloc_commit_uobject()
  RDMA/hns: Fix wrong PBL offset when VA is not aligned to PAGE_SIZE
  RDMA/hns: Fix wrong assignment of lp_pktn_ini in QPC
  RDMA/mlx5: Use xa_lock_irq when access to SRQ table

Merge tag 'for-5.8/dm-fixes-3' of git://git./linux/kernel/git/device-mapper/linux-dm into master

Pull device mapper fix from Mike Snitzer:
"A stable fix for DM integrity target's integrity recalculation that
  gets skipped when resuming a device. This is a fix for a previous
  stable@ fix"

* tag 'for-5.8/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm integrity: fix integrity recalculation that is improperly skipped

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux into master

Pull i2c fixes from Wolfram Sang:
"Again some driver bugfixes and some documentation fixes"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i2c-qcom-geni: Fix DMA transfer race
  i2c: rcar: always clear ICSAR to avoid side effects
  MAINTAINERS: i2c: at91: handover maintenance to Codrin Ciubotariu
  i2c: drop duplicated word in the header file
  i2c: cadence: Clear HOLD bit at correct time in Rx path
  Revert "i2c: cadence: Fix the hold bit setting"

Merge tag 'mmc-v5.8-rc5' of git://git./linux/kernel/git/ulfh/mmc into master

Pull MMC fix from Ulf Hansson:
"Fix clock divider calculation in the ASPEED SDHCI controller"

* tag 'mmc-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-of-aspeed: Fix clock divider calculation

Merge tag 'drm-fixes-2020-07-24' of git://anongit.freedesktop.org/drm/drm into master

Pull drm fixes from Dave Airlie:
"Quiet fixes, I may have a single regression fix follow up to this for
  nouveau, but it might be next week, Ben was testing it a bit more .

  Otherwise two amdgpu fixes, one lima and one sun4i:

  amdgpu:
    - Fix crash when overclocking VegaM
    - Fix possible crash when editing dpm levels

  sun4i:
    - Fix inverted HPD result; fixes an earlier fix

  lima:
    - fix timeout during reset"

* tag 'drm-fixes-2020-07-24' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: Fix NULL dereference in dpm sysfs handlers
  drm/amd/powerplay: fix a crash when overclocking Vega M
  drm/lima: fix wait pp reset timeout
  drm: sun4i: hdmi: Fix inverted HPD result

scripts/gdb: fix lx-symbols 'gdb.error' while loading modules

Commit ed66f991bb19 ("module: Refactor section attr into bin attribute")
removed the 'name' field from 'struct module_sect_attr' triggering the
following error when invoking lx-symbols:

  (gdb) lx-symbols
  loading vmlinux
  scanning for modules in linux/build
  loading @0xffffffffc014f000: linux/build/drivers/net/tun.ko
  Python Exception <class 'gdb.error'> There is no member named name.:
  Error occurred in Python: There is no member named name.

This patch fixes the issue taking the module name from the 'struct
attribute'.

Fixes: ed66f991bb19 ("module: Refactor section attr into bin attribute")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Kieran Bingham <kbingham@kernel.org>
Link: http://lkml.kernel.org/r/20200722102239.313231-1-sgarzare@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add KCOV section

To link KCOV to the kasan-dev@ mailing list.

Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Link: http://lkml.kernel.org/r/5fa344db7ac4af2213049e5656c0f43d6ecaa379.1595331682.git.andreyknvl@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

io-mapping: indicate mapping failure

The !ATOMIC_IOMAP version of io_maping_init_wc will always return
success, even when the ioremap fails.

Since the ATOMIC_IOMAP version returns NULL when the init fails, and
callers check for a NULL return on error this is unexpected.

During a device probe, where the ioremap failed, a crash can look like
this:

    BUG: unable to handle page fault for address: 0000000000210000
     #PF: supervisor write access in kernel mode
     #PF: error_code(0x0002) - not-present page
     Oops: 0002 [#1] PREEMPT SMP
     CPU: 0 PID: 177 Comm:
     RIP: 0010:fill_page_dma [i915]
       gen8_ppgtt_create [i915]
       i915_ppgtt_create [i915]
       intel_gt_init [i915]
       i915_gem_init [i915]
       i915_driver_probe [i915]
       pci_device_probe
       really_probe
       driver_probe_device

The remap failure occurred much earlier in the probe.  If it had been
propagated, the driver would have exited with an error.

Return NULL on ioremap failure.

[akpm@linux-foundation.org: detect ioremap_wc() errors earlier]

Fixes: cafaf14a5d8f ("io-mapping: Always create a struct to hold metadata about the io-mapping")
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200721171936.81563-1-michael.j.ruhl@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scripts/decode_stacktrace: strip basepath from all paths

Currently the basepath is removed only from the beginning of the string.
When the symbol is inlined and there's multiple line outputs of
addr2line, only the first line would have basepath removed.

Change to remove the basepath prefix from all lines.

Fixes: 31013836a71e ("scripts/decode_stacktrace: match basepath using shell prefix operator, not regex")
Co-developed-by: Shik Chen <shik@chromium.org>
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Shik Chen <shik@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Link: http://lkml.kernel.org/r/20200720082709.252805-1-pihsun@chromium.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

squashfs: fix length field overlap check in metadata reading

This is a regression introduced by the "migrate from ll_rw_block usage
to BIO" patch.

Squashfs packs structures on byte boundaries, and due to that the length
field (of the metadata block) may not be fully in the current block.
The new code rewrote and introduced a faulty check for that edge case.

Fixes: 93e72b3c612adcaca1 ("squashfs: migrate from ll_rw_block usage to BIO")
Reported-by: Bernd Amend <bernd.amend@gmail.com>
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Adrien Schildknecht <adrien+dev@schischi.me>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Daniel Rosenberg <drosen@google.com>
Link: http://lkml.kernel.org/r/20200717195536.16069-1-phillip@squashfs.org.uk
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mailmap: add entry for Mike Rapoport

Add an entry to correct my email addresses.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200708095414.12275-1-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

khugepaged: fix null-pointer dereference due to race

khugepaged has to drop mmap lock several times while collapsing a page.
The situation can change while the lock is dropped and we need to
re-validate that the VMA is still in place and the PMD is still subject
for collapse.

But we miss one corner case: while collapsing an anonymous pages the VMA
could be replaced with file VMA. If the file VMA doesn't have any
private pages we get NULL pointer dereference:

general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
anon_vma_lock_write include/linux/rmap.h:120 [inline]
collapse_huge_page mm/khugepaged.c:1110 [inline]
khugepaged_scan_pmd mm/khugepaged.c:1349 [inline]
khugepaged_scan_mm_slot mm/khugepaged.c:2110 [inline]
khugepaged_do_scan mm/khugepaged.c:2193 [inline]
khugepaged+0x3bba/0x5a10 mm/khugepaged.c:2238

The fix is to make sure that the VMA is anonymous in
hugepage_vma_revalidate(). The helper is only used for collapsing
anonymous pages.

Fixes: 99cb0dbd47a1 ("mm,thp: add read-only THP support for (non-shmem) FS")
Reported-by: syzbot+ed318e8b790ca72c5ad0@syzkaller.appspotmail.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200722121439.44328-1-kirill.shutemov@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: avoid hardcoding while checking if cma is enabled

hugetlb_cma[0] can be NULL due to various reasons, for example, node0
has no memory. so NULL hugetlb_cma[0] doesn't necessarily mean cma is
not enabled. gigantic pages might have been reserved on other nodes.
This patch fixes possible double reservation and CMA leak.

[akpm@linux-foundation.org: fix CONFIG_CMA=n warning]
[sfr@canb.auug.org.au: better checks before using hugetlb_cma]
Link: http://lkml.kernel.org/r/20200721205716.6dbaa56b@canb.auug.org.au
Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma")
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200710005726.36068-1-song.bao.hua@hisilicon.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcg/slab: fix memory leak at non-root kmem_cache destroy

If the kmem_cache refcount is greater than one, we should not mark the
root kmem_cache as dying.  If we mark the root kmem_cache dying
incorrectly, the non-root kmem_cache can never be destroyed.  It
resulted in memory leak when memcg was destroyed.  We can use the
following steps to reproduce.

  1) Use kmem_cache_create() to create a new kmem_cache named A.
  2) Coincidentally, the kmem_cache A is an alias for kmem_cache B,
     so the refcount of B is just increased.
  3) Use kmem_cache_destroy() to destroy the kmem_cache A, just
     decrease the B's refcount but mark the B as dying.
  4) Create a new memory cgroup and alloc memory from the kmem_cache
     B. It leads to create a non-root kmem_cache for allocating memory.
  5) When destroy the memory cgroup created in the step 4), the
     non-root kmem_cache can never be destroyed.

If we repeat steps 4) and 5), this will cause a lot of memory leak.  So
only when refcount reach zero, we mark the root kmem_cache as dying.

Fixes: 92ee383f6daa ("mm: fix race between kmem_cache destroy, create and deactivate")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200716165103.83462-1-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memcg: fix refcount error while moving and swapping

It was hard to keep a test running, moving tasks between memcgs with
move_charge_at_immigrate, while swapping: mem_cgroup_id_get_many()'s
refcount is discovered to be 0 (supposedly impossible), so it is then
forced to REFCOUNT_SATURATED, and after thousands of warnings in quick
succession, the test is at last put out of misery by being OOM killed.

This is because of the way moved_swap accounting was saved up until the
task move gets completed in __mem_cgroup_clear_mc(), deferred from when
mem_cgroup_move_swap_account() actually exchanged old and new ids.
Concurrent activity can free up swap quicker than the task is scanned,
bringing id refcount down 0 (which should only be possible when
offlining).

Just skip that optimization: do that part of the accounting immediately.

Fixes: 615d66c37c75 ("mm: memcontrol: fix memcg id ref counter on swap charge move")
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2007071431050.4726@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memcontrol: fix OOPS inside mem_cgroup_get_nr_swap_pages()

Prabhakar reported an OOPS inside mem_cgroup_get_nr_swap_pages()
function in a corner case seen on some arm64 boards when kdump kernel
runs with "cgroup_disable=memory" passed to the kdump kernel via
bootargs.

The root-cause behind the same is that currently mem_cgroup_swap_init()
function is implemented as a subsys_initcall() call instead of a
core_initcall(), this means 'cgroup_memory_noswap' still remains set to
the default value (false) even when memcg is disabled via
"cgroup_disable=memory" boot parameter.

This may result in premature OOPS inside mem_cgroup_get_nr_swap_pages()
function in corner cases:

  Unable to handle kernel NULL pointer dereference at virtual address 0000000000000188
  Mem abort info:
    ESR = 0x96000006
    EC = 0x25: DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
  Data abort info:
    ISV = 0, ISS = 0x00000006
    CM = 0, WnR = 0
  [0000000000000188] user address but active_mm is swapper
  Internal error: Oops: 96000006 [#1] SMP
  Modules linked in:
  <..snip..>
  Call trace:
    mem_cgroup_get_nr_swap_pages+0x9c/0xf4
    shrink_lruvec+0x404/0x4f8
    shrink_node+0x1a8/0x688
    do_try_to_free_pages+0xe8/0x448
    try_to_free_pages+0x110/0x230
    __alloc_pages_slowpath.constprop.106+0x2b8/0xb48
    __alloc_pages_nodemask+0x2ac/0x2f8
    alloc_page_interleave+0x20/0x90
    alloc_pages_current+0xdc/0xf8
    atomic_pool_expand+0x60/0x210
    __dma_atomic_pool_init+0x50/0xa4
    dma_atomic_pool_init+0xac/0x158
    do_one_initcall+0x50/0x218
    kernel_init_freeable+0x22c/0x2d0
    kernel_init+0x18/0x110
    ret_from_fork+0x10/0x18
  Code: aa1403e3 91106000 97f82a27 14000011 (f940c663)
  ---[ end trace 9795948475817de4 ]---
  Kernel panic - not syncing: Fatal exception
  Rebooting in 10 seconds..

Fixes: eccb52e78809 ("mm: memcontrol: prepare swap controller setup for integration")
Reported-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: James Morse <james.morse@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Link: http://lkml.kernel.org/r/1593641660-13254-2-git-send-email-bhsharma@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: initialize return of vm_insert_pages

clang static analysis reports a garbage return

  In file included from mm/memory.c:84:
  mm/memory.c:1612:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn]
          return err;
          ^~~~~~~~~~

The setting of err depends on a loop executing.  So initialize err.

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200703155354.29132-1-trix@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vfs/xattr: mm/shmem: kernfs: release simple xattr entry in a right way

After commit fdc85222d58e ("kernfs: kvmalloc xattr value instead of
kmalloc"), simple xattr entry is allocated with kvmalloc() instead of
kmalloc(), so we should release it with kvfree() instead of kfree().

Fixes: fdc85222d58e ("kernfs: kvmalloc xattr value instead of kmalloc")
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Daniel Xu <dxu@dxuuu.xyz>
Cc: Chris Down <chris@chrisdown.name>
Cc: Andreas Dilger <adilger@dilger.ca>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org> [5.7]
Link: http://lkml.kernel.org/r/20200704051608.15043-1-cgxu519@mykernel.net
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmap.c: close race between munmap() and expand_upwards()/downwards()

VMA with VM_GROWSDOWN or VM_GROWSUP flag set can change their size under
mmap_read_lock().  It can lead to race with __do_munmap():

Thread A Thread B
__do_munmap()
  detach_vmas_to_be_unmapped()
  mmap_write_downgrade()
expand_downwards()
  vma->vm_start = address;
  // The VMA now overlaps with
  // VMAs detached by the Thread A
// page fault populates expanded part
// of the VMA
  unmap_region()
    // Zaps pagetables partly
    // populated by Thread B

Similar race exists for expand_upwards().

The fix is to avoid downgrading mmap_lock in __do_munmap() if detached
VMAs are next to VM_GROWSDOWN or VM_GROWSUP VMA.

[akpm@linux-foundation.org: s/mmap_sem/mmap_lock/ in comment]

Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Yang Shi <yang.shi@linux.alibaba.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org> [4.20+]
Link: http://lkml.kernel.org/r/20200709105309.42495-1-kirill.shutemov@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uprobes: Change handle_swbp() to send SIGTRAP with si_code=SI_KERNEL, to fix GDB regression

If a tracee is uprobed and it hits int3 inserted by debugger, handle_swbp()
does send_sig(SIGTRAP, current, 0) which means si_code == SI_USER. This used
to work when this code was written, but then GDB started to validate si_code
and now it simply can't use breakpoints if the tracee has an active uprobe:

# cat test.c
void unused_func(void)
{
}
int main(void)
{
return 0;
}

# gcc -g test.c -o test
# perf probe -x ./test -a unused_func
# perf record -e probe_test:unused_func gdb ./test -ex run
GNU gdb (GDB) 10.0.50.20200714-git
...
Program received signal SIGTRAP, Trace/breakpoint trap.
0x00007ffff7ddf909 in dl_main () from /lib64/ld-linux-x86-64.so.2
(gdb)

The tracee hits the internal breakpoint inserted by GDB to monitor shared
library events but GDB misinterprets this SIGTRAP and reports a signal.

Change handle_swbp() to use force_sig(SIGTRAP), this matches do_int3_user()
and fixes the problem.

This is the minimal fix for -stable, arch/x86/kernel/uprobes.c is equally
wrong; it should use send_sigtrap(TRAP_TRACE) instead of send_sig(SIGTRAP),
but this doesn't confuse GDB and needs another x86-specific patch.

Reported-by: Aaron Merey <amerey@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200723154420.GA32043@redhat.com