docs: Document how to stream to an intermediate layer

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Add QMP support for streaming to an intermediate layer

This patch makes the 'device' parameter of the 'block-stream' command
accept a node name that is not a root node. The presence of this
feature can't be directly tested with introspection; soon we'll
introduce a 'base-node' parameter whose presence can be checked for
this purpose.

In addition to that, operation blockers will be checked in all
intermediate nodes between the top and the base node.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Support streaming to an intermediate layer

This makes sure that the image we are streaming into is open in
read-write mode during the operation.

Operation blockers are also set in all intermediate nodes, since they
will be removed from the chain afterwards.

Finally, this also unblocks the stream operation in backing files.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Block all intermediate nodes in commit_active_start()

When block-commit is launched without the top parameter, it uses
internally a mirror block job. In that case all intermediate nodes
between the active and base nodes must be blocked as well.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Block all nodes involved in the block-commit operation

After a successful block-commit operation all nodes between top and
base are removed from the backing chain, and top's overlay needs to
be updated to point to base. Because of that we should prevent other
block jobs from messing with them.

This patch blocks all operations in these nodes in commit_start().

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Check blockers in all nodes involved in a block-commit job

qmp_block_commit() checks for op blockers in the active and
destination (base) images. However all nodes between top_bs and base
are also involved, and they are removed from the chain afterwards.

In addition to that, if top_bs is not the active layer then top_bs's
overlay also needs to be checked because it's involved in the job (its
backing image string needs to be updated to point to 'base').

This patch checks that none of those nodes are blocked.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Use block_job_add_bdrv() in backup_start()

Use block_job_add_bdrv() instead of blocking all operations in
backup_start() and unblocking them in backup_run().

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Use block_job_add_bdrv() in mirror_start_job()

Use block_job_add_bdrv() instead of blocking all operations in
mirror_start_job() and unblocking them in mirror_exit().

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Add block_job_add_bdrv()

When a block job is created on a certain BlockDriverState, operations
are blocked there while the job exists. However, some block jobs may
involve additional BDSs, which must be blocked separately when the job
is created and unblocked manually afterwards.

This patch adds block_job_add_bdrv(), that simplifies this process by
keeping a list of BDSs that are involved in the specified block job.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Pause all jobs during bdrv_reopen_multiple()

When a BlockDriverState is about to be reopened it can trigger certain
operations that need to write to disk. During this process a different
block job can be woken up. If that block job completes and also needs
to call bdrv_reopen() it can happen that it needs to do it on the same
BlockDriverState that is still in the process of being reopened.

This can have fatal consequences, like in this example:

  1) Block job A starts and sleeps after a while.
  2) Block job B starts and tries to reopen node1 (a qcow2 file).
  3) Reopening node1 means flushing and replacing its qcow2 cache.
  4) While the qcow2 cache is being flushed, job A wakes up.
  5) Job A completes and reopens node1, replacing its cache.
  6) Job B resumes, but the cache that was being flushed no longer
     exists.

This patch splits the bdrv_drain_all() call to keep all block jobs
paused during bdrv_reopen_multiple(), so that step 4 can never happen
and the operation is safe.

Note that this scenario can only happen if both bdrv_reopen() calls
are made by block jobs on the same backing chain. Otherwise there's no
chance that the same BlockDriverState appears in both reopen queues.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block: Add bdrv_drain_all_{begin,end}()

bdrv_drain_all() doesn't allow the caller to do anything after all
pending requests have been completed but before block jobs are
resumed.

This patch splits bdrv_drain_all() into _begin() and _end() for that
purpose. It also adds aio_{disable,enable}_external() calls to disable
external clients in the meantime.

An important restriction of this split is that no new block jobs or
BlockDriverStates can be created between the bdrv_drain_all_begin()
and bdrv_drain_all_end() calls. This is not a concern now because
we'll only be using this in bdrv_reopen_multiple(), but it must be
dealt with if we ever have other uses cases in the future.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

qapi: allow blockdev-add for ssh

Introduce new object 'BlockdevOptionsSsh' in qapi/block-core.json to
support blockdev-add for SSH network protocol driver. Use only 'struct
InetSocketAddress' since SSH only supports connection over TCP.

Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
[ kwolf: Removed host_key_check option, we want to expose this later in
  a structured way rather than as a string that must be parsed ]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block/ssh: Use InetSocketAddress options

Drop the use of legacy options in favour of the InetSocketAddress
options.

Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block/ssh: Add InetSocketAddress and accept it

Add InetSocketAddress compatibility to SSH driver.

Add a new option "server" to the SSH block driver which then accepts
a InetSocketAddress.

"host" and "port" are supported as legacy options and are mapped to
their InetSocketAddress representation.

Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

util/qemu-sockets: Make inet_connect_saddr() public

Make inet_connect_saddr() in util/qemu-sockets.c public in order to be
able to use it with InetSocketAddress sockets outside of
util/qemu-sockets.c independently.

Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

block/ssh: Add ssh_has_filename_options_conflict()

We have 5 options plus ("server") option which is added in the next
patch that conflict with specifying a SSH filename. We need to iterate
over all the options to check whether its key has an "server." prefix.

This iteration will help us adding the new option "server" easily.

Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20161031' into staging

Two PCI fixes/improvements for s390x.

# gpg: Signature made Mon 31 Oct 2016 10:09:24 GMT
# gpg:                using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20161031:
  s390x/pci: Check memory region dispatching callbacks
  s390x/pci: use generic interface to inject interrupt

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/amit-migration/tags/migration-for-2.8' into staging

Migration bits from the COLO project

# gpg: Signature made Sun 30 Oct 2016 10:39:55 GMT
# gpg:                using RSA key 0xEB0B4DFC657EF670
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg:                 aka "Amit Shah <amit@kernel.org>"
# gpg:                 aka "Amit Shah <amitshah@gmx.net>"
# Primary key fingerprint: 48CA 3722 5FE7 F4A8 B337  2735 1E9A 3B5F 8540 83B6
#      Subkey fingerprint: CC63 D332 AB8F 4617 4529  6534 EB0B 4DFC 657E F670

* remotes/amit-migration/tags/migration-for-2.8:
  MAINTAINERS: Add maintainer for COLO framework related files
  configure: Support enable/disable COLO feature
  docs: Add documentation for COLO feature
  COLO: Implement failover work for secondary VM
  COLO: Implement the process of failover for primary VM
  COLO: Introduce state to record failover process
  COLO: Add 'x-colo-lost-heartbeat' command to trigger failover
  COLO: Synchronize PVM's state to SVM periodically
  COLO: Add checkpoint-delay parameter for migrate-set-parameters
  COLO: Load VMState into QIOChannelBuffer before restore it
  COLO: Send PVM state to secondary side when do checkpoint
  COLO: Add a new RunState RUN_STATE_COLO
  COLO: Introduce checkpointing protocol
  COLO: Establish a new communicating path for COLO
  migration: Switch to COLO process after finishing loadvm
  migration: Enter into COLO mode after migration if COLO is enabled
  COLO: migrate COLO related info to secondary node
  migration: Introduce capability 'x-colo' to migration

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20161028-tag' into staging

Xen 2016/10/28

# gpg: Signature made Sat 29 Oct 2016 02:03:42 BST
# gpg:                using RSA key 0x894F8F4870E1AE90
# gpg: Good signature from "Stefano Stabellini <sstabellini@kernel.org>"
# gpg:                 aka "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
# Primary key fingerprint: D04E 33AB A51F 67BA 07D3  0AEA 894F 8F48 70E1 AE90

* remotes/sstabellini/tags/xen-20161028-tag:
  xen: Rename xen_be_del_xendev
  xen: Rename xen_be_find_xendev
  xen: Rename xen_be_evtchn_event
  xen: Rename xen_be_send_notify
  xen: Rename xen_be_unbind_evtchn
  xen: Rename xen_be_printf to xen_pv_printf
  xen: Move xenstore cleanup and mkdir functions
  xen: Prepare xendev qtail to be shared with frontends
  xen: Move evtchn functions to xen_pvdev.c
  xen: Move xenstore_update to xen_pvdev.c
  xen: Create a new file xen_pvdev.c
  xen: Fix coding style warnings
  xen: Fix coding style errors

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into staging

trivial patches for 2016-10-28

# gpg: Signature made Fri 28 Oct 2016 16:17:51 BST
# gpg:                using RSA key 0x701B4F6B1A693E59
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg:                 aka "Michael Tokarev <mjt@corpit.ru>"
# gpg:                 aka "Michael Tokarev <mjt@debian.org>"
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D  4324 457C E0A0 8044 65C5
#      Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931  4B22 701B 4F6B 1A69 3E59

* remotes/mjt/tags/trivial-patches-fetch: (23 commits)
  Fix build for less common build directories names
  clean-up: removed duplicate #includes
  scripts/clean-includes: added duplicate #include check
  monitor: deprecate 'default' option
  qemu-ga: Remove stray 'q' in documentation
  Makefile: Fix help text for target 'installer'
  s390: avoid always-true comparison in s390_pci_generate_fid()
  migration: Remove unneeded NULL check from migrate_fd_error()
  scripts/hxtool: fix undefined behavour of echo
  qemu-options.hx: set: fix copy-paste error
  usb: Change *_exitfn return type from int to void
  MAINTAINERS: qemu-trivial information
  colo-compare: remove unused struct CompareChardevProps and 'props' variable
  milkymist-pfpu: fix potential integer overflow
  hw/block/nvme: Simplify if-statements a little bit
  target-lm32: rewrite gen_compare()
  lm32: milkymist-tmu2: fix integer overflow
  target-lm32: disable asm logging via LOG_DIS()
  target-lm32: swap operand of wcsr in LOG_DIS()
  target-lm32: fix LOG_DIS operand order
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20161028' into staging

target-arm queue:
 * Fix reset GPIO handling for spitz, tosa boards
 * virt: add 'pmu' property for configuring whether to expose the
   vPMU to the guest
 * char: cadence: correct reset value for baud rate registers
 * versatilepb: do not run if user asks for more than 256MB RAM
 * pxa2xx: Set value default values for CCCR and CKEN on PXA255
 * arm: cubieboard: Add support for initrd
 * i.MX: Fix GPIO ISR register write

# gpg: Signature made Fri 28 Oct 2016 15:56:56 BST
# gpg:                using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20161028:
  hw/arm/tosa: Fix reset handling
  hw/arm/spitz: Fix reset handling
  arm: virt: add PMU property to mach-virt machine type
  arm: Add an option to turn on/off vPMU support
  char: cadence: correct reset value for baud rate registers
  versatilepb: do not run if user asks for more than 256MB RAM
  hw/arm/pxa2xx: Set value default values for CCCR and CKEN on PXA255
  arm: cubieboard: Add support for initrd
  i.MX: Fix GPIO ISR register write

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/famz/tags/for-upstream' into staging

# gpg: Signature made Fri 28 Oct 2016 15:47:39 BST
# gpg:                using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021  AD56 CA35 624C 6A91 71C6

* remotes/famz/tags/for-upstream:
  aio: convert from RFifoLock to QemuRecMutex
  qemu-thread: introduce QemuRecMutex
  iothread: release AioContext around aio_poll
  block: only call aio_poll on the current thread's AioContext
  qemu-img: call aio_context_acquire/release around block job
  qemu-io: acquire AioContext
  block: prepare bdrv_reopen_multiple to release AioContext
  replication: pass BlockDriverState to reopen_backing_file
  iothread: detach all block devices before stopping them
  aio: introduce qemu_get_current_aio_context
  sheepdog: use BDRV_POLL_WHILE
  nfs: use BDRV_POLL_WHILE
  nfs: move nfs_set_events out of the while loops
  block: introduce BDRV_POLL_WHILE
  qed: Implement .bdrv_drain
  block: change drain to look only at one child at a time
  block: add BDS field to count in-flight requests
  mirror: use bdrv_drained_begin/bdrv_drained_end
  blockjob: introduce .drain callback for jobs
  replication: interrupt failover if the main device is closed

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

s390x/pci: Check memory region dispatching callbacks

The instructions PCI STORE, PCI LOAD and PCI STORE BLOCK
use calls to memory_region_dispatch_write() and
memory_region_dispatch_read() but do not test the return value.

Furthermore, the instruction PCI STORE BLOCK sets up a PGM_ADDRESSING
exception when the operand 3 is not within the designated PCI address
space instead of a PGM_OPERAND exception.

Let's setup a PGM_OPERAND exception in all of these failure cases.

Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

s390x/pci: use generic interface to inject interrupt

Let's use the generic interface to inject adapter interrupts.

Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>

MAINTAINERS: Add maintainer for COLO framework related files

Add myself as co-maintainer of COLO framework, so that
I can get CC'ed on future patches and bugs for this feature.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>

configure: Support enable/disable COLO feature

configure --enable-colo/--disable-colo to switch COLO
support on/off.

COLO feature doesn't depend on any other external libraries,
So here it is reasonable to enable COLO by default, to
avoid re-compile QEMU if users want to use this capability.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>

docs: Add documentation for COLO feature

Introduce the design of COLO, and how to test it.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>

COLO: Implement failover work for secondary VM

If users require SVM to takeover work, COLO incoming thread should
exit from loop while failover BH helps backing to migration incoming
coroutine.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>

COLO: Implement the process of failover for primary VM

For primary side, if COLO gets failover request from users.
To be exact, gets 'x_colo_lost_heartbeat' command.
COLO thread will exit the loop while the failover BH does the
cleanup work and resumes VM.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>

COLO: Introduce state to record failover process

When handling failover, COLO processes differently according to
the different stage of failover process, here we introduce a global
atomic variable to record the status of failover.

We add four failover status to indicate the different stage of failover process.
You should use the helpers to get and set the value.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>

COLO: Add 'x-colo-lost-heartbeat' command to trigger failover

We leave users to choose whatever heartbeat solution they want,
if the heartbeat is lost, or other errors they detect, they can use
experimental command 'x_colo_lost_heartbeat' to tell COLO to do failover,
COLO will do operations accordingly.

For example, if the command is sent to the Primary side,
the Primary side will exit COLO mode, does cleanup work,
and then, PVM will take over the service work. If sent to the Secondary side,
the Secondary side will run failover work, then takes over PVM's service work.

Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>

COLO: Synchronize PVM's state to SVM periodically

Do checkpoint periodically, the default interval is 200ms.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>

COLO: Add checkpoint-delay parameter for migrate-set-parameters

Add checkpoint-delay parameter for migrate-set-parameters, so that
we can control the checkpoint frequency when COLO is in periodic mode.

Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>

COLO: Load VMState into QIOChannelBuffer before restore it

We should not destroy the state of SVM (Secondary VM) until we receive
the complete data of PVM's state, in case the primary fails in the process
of sending the state, so we cache the VM's state in secondary side before
load it into SVM.

Besides, we should call qemu_system_reset() before load VM state,
which can ensure the data is intact.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>

COLO: Send PVM state to secondary side when do checkpoint

VM checkpointing is to synchronize the state of PVM to SVM, just
like migration does, we re-use save helpers to achieve migrating
PVM's state to Secondary side.

COLO need to cache the data of VM's state in the secondary side before
synchronize it to SVM. COLO need the size of the data to determine
how much data should be read in the secondary side.
So here, we can get the size of the data by saving it into I/O channel
before send it to the secondary side.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>

COLO: Add a new RunState RUN_STATE_COLO

Guest will enter this state when paused to save/restore VM state
under COLO checkpoint.

Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>

COLO: Introduce checkpointing protocol

We need communications protocol of user-defined to control
the checkpointing process.

The new checkpointing request is started by Primary VM,
and the interactive process like below:

Checkpoint synchronizing points:

                   Primary               Secondary
                                            initial work
'checkpoint-ready'    <-------------------- @

'checkpoint-request'  @ -------------------->
                                            Suspend (Only in hybrid mode)
'checkpoint-reply'    <-------------------- @
                      Suspend&Save state
'vmstate-send'        @ -------------------->
                      Send state            Receive state
'vmstate-received'    <-------------------- @
                      Release packets       Load state
'vmstate-load'        <-------------------- @
                      Resume                Resume (Only in hybrid mode)

                      Start Comparing (Only in hybrid mode)
NOTE:
 1) '@' who sends the message
 2) Every sync-point is synchronized by two sides with only
    one handshake(single direction) for low-latency.
    If more strict synchronization is required, a opposite direction
    sync-point should be added.
 3) Since sync-points are single direction, the remote side may
    go forward a lot when this side just receives the sync-point.
 4) For now, we only support 'periodic' checkpoint, for which
   the Secondary VM is not running, later we will support 'hybrid' mode.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>

COLO: Establish a new communicating path for COLO

This new communication path will be used for returning messages
from Secondary side to Primary side.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>

migration: Switch to COLO process after finishing loadvm

Switch from normal migration loadvm process into COLO checkpoint process if
COLO mode is enabled.

We add three new members to struct MigrationIncomingState,
'have_colo_incoming_thread' and 'colo_incoming_thread' record the COLO
related thread for secondary VM, 'migration_incoming_co' records the
original migration incoming coroutine.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>

migration: Enter into COLO mode after migration if COLO is enabled

Add a new migration state: MIGRATION_STATUS_COLO. Migration source side
enters this state after the first live migration successfully finished
if COLO is enabled by command 'migrate_set_capability x-colo on'.

We reuse migration thread, so the process of checkpointing will be handled
in migration thread.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>

COLO: migrate COLO related info to secondary node

We can determine whether or not VM in destination should go into COLO mode
by referring to the info that was migrated.

We skip this section if COLO is not enabled (i.e.
migrate_set_capability colo off), so that, It doesn't break compatibility
with migration no matter whether users configure the --enable-colo/disable-colo
on the source/destination side or not;

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>

migration: Introduce capability 'x-colo' to migration

We add helper function colo_supported() to indicate whether
colo is supported or not, with which we use to control whether or not
showing 'x-colo' string to users, they can use qmp command
'query-migrate-capabilities' or hmp command 'info migrate_capabilities'
to learn if colo is supported.

The default value for COLO (COarse-Grain LOck Stepping) is disabled.

Cc: Juan Quintela <quintela@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>

xen: Rename xen_be_del_xendev

Prepare xen_be_del_xendev to be shared with frontends:
 * xen_be_del_xendev -> xen_pv_del_xendev

Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>

xen: Rename xen_be_find_xendev

Prepare xen_be_find_xendev to be shared with frontends:
 * xen_be_find_xendev -> xen_pv_find_xendev

Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>

xen: Rename xen_be_evtchn_event

Prepare xen_be_evtchn_event to be shared with frontends:
 * xen_be_evtchn_event -> xen_pv_evtchn_event

Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>

xen: Rename xen_be_send_notify

Prepare xen_be_send_notify to be shared with frontends:
 * xen_be_send_notify -> xen_pv_send_notify

Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>

xen: Rename xen_be_unbind_evtchn

Prepare xen_be_unbind_evtchn to be shared with frontends:
 * xen_be_unbind_evtchn -> xen_pv_unbind_evtchn

Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>

xen: Rename xen_be_printf to xen_pv_printf

Prepare xen_be_printf to be used by both backend and frontends:
 * xen_be_printf -> xen_pv_printf

Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>

xen: Move xenstore cleanup and mkdir functions

The name of the functions moved to xen_pvdev.c:
 * xenstore_cleanup_dir
 * xen_config_cleanup
 * xenstore_mkdir

Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>

xen: Prepare xendev qtail to be shared with frontends

 * move xendevs qtail to xen_pvdev.c
 * change xen_be_get_xendev to use a new function: xen_pv_insert_xendev

Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>

xen: Move evtchn functions to xen_pvdev.c

The name of the functions moved:
 * xen_be_evtchn_event
 * xen_be_unbind_evtchn
 * xen_be_send_notify

Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>

xen: Move xenstore_update to xen_pvdev.c

 * xenstore_update -> xen_pvdev.c

Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>

xen: Create a new file xen_pvdev.c

The purpose of the new file is to store generic functions shared by frontend
and backends such as xenstore operations, xendevs.

Signed-off-by: Quan Xu <quan.xu@intel.com>
Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>

xen: Fix coding style warnings

Fixes:
 * WARNING: line over 80 characters

Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>

xen: Fix coding style errors

Fixes the following errors:
 * ERROR: line over 90 characters
 * ERROR: code indent should never use tabs
 * ERROR: space prohibited after that open square bracket '['
 * ERROR: do not initialise statics to 0 or NULL
 * ERROR: "(foo*)" should be "(foo *)"

Signed-off-by: Emil Condrea <emilcondrea@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Quan Xu <xuquan8@huawei.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>

net: split colo_compare_pkt_info into two trace events

It seems there is a limit to the number of arguments a UST trace event
can take and at 11 the previous trace command broke the build. Split the
trace into a src pkt and dst pkt trace to fix this.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20161028132559.8324-1-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/kraxel/tags/pull-ui-20161028-1' into staging

braille fixes and improvements.
curses fix, switch to cursesw.
gtk bugfixes.

# gpg: Signature made Fri 28 Oct 2016 13:05:12 BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/pull-ui-20161028-1:
  curses: Use cursesw instead of curses
  curses: fix left/right arrow translation
  ui/gtk: Fix non-working DELETE key
  gtk: fix compilation warning with gtk 3.22.2
  Defer BrlAPI tty acquisition to when guest starts using device
  Add dots keypresses support to the baum braille device

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/vivier/tags/m68k-part2-pull-request' into staging

# gpg: Signature made Fri 28 Oct 2016 09:44:23 BST
# gpg:                using RSA key 0xF30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier/tags/m68k-part2-pull-request:
  MAINTAINERS: update M68K entry
  target-m68k: immediate ops manage word and byte operands
  target-m68k: cmp manages word and bytes operands
  target-m68k: add/sub manage word and byte operands
  target-m68k: add addressing modes to neg
  target-m68k: introduce byte and word cc_ops
  target-m68k: some bit ops cleanup
  target-m68k: suba/adda can manage word operand
  target-m68k: and can manage word and byte operands
  target-m68k: or can manage word and byte operands
  target-m68k: eor can manage word and byte operands
  target-m68k: add addressing modes to not
  target-m68k: Inline addx, subx, negx
  target-m68k: add dbcc
  target-m68k: add addressing modes to scc
  target-m68k: add exg ops
  target-m68k: add linkl
  target-m68k: add bkpt instruction

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.8-20161028' into staging

ppc patch queue 2016-10-28

This pull request supersedes and extends the one from 2016-10-26
(which had a build bug).

Highlights:
  * SLOF (pseries guest firmware) update
  * Enable a number of extra testcases on ppc / pseries
  * Added the 'powernv' machine type
    - Almost enough to be minimally usable
    - But still missing necessary interrupt controller updates
  * Cleanup and consolidation of NVRAM handling on several platforms
    with related firmware
  * Substantial cleanup to device tree construction
  * Some more POWER9 instruction emulation
  * Cleanup to handling of pseries option vectors and CAS reboot
    handling (host/guest feature negotiation mechanism)
  * Significant cleanups to handling of PCI devices in test cases
  * New hotplug event infrastructure
  * Memory hot unplug support for pseries
  * Several bug fixes

The NVRAM cleanup affects some Sun sparc platforms as well as ppc
ones, but have been tested by the sparc maintainer (Mark Cave-Ayland).

The test additions also include substantial general changes to the
test framework that aren't strictly ppc related.  They don't seem to
break tests on other platforms, they're for the benefit of enabling
tests on ppc and there isn't a specific maintainer for them, so
they're included in this tree.

# gpg: Signature made Fri 28 Oct 2016 02:37:19 BST
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.8-20161028: (73 commits)
  ppc: allow certain HV interrupts to be delivered to guests
  spapr: Memory hot-unplug support
  spapr: use count+index for memory hotplug
  spapr: Add DRC count indexed hotplug identifier type
  spapr: add hotplug interrupt machine options
  spapr_events: add support for dedicated hotplug event source
  spapr: update spapr hotplug documentation
  target-ppc: Add xvcmpnesp, xvcmpnedp instructions
  target-ppc: add xscmp[eq,gt,ge,ne]dp instructions
  tests: Add pseries machine to the prom-env-test, too
  spapr_nvram: Pre-initialize the NVRAM to support the -prom-env parameter
  libqos: Change PCI accessors to take opaque BAR handle
  tests: Don't assume structure of PCI IO base in ahci-test
  tests: Use qpci_mem{read,write} in ivshmem-test
  libqos: Add 64-bit PCI IO accessors
  tests: Clean up IO handling in ide-test
  libqos: Implement mmio accessors in terms of mem{read,write}
  libqos: Add streaming accessors for PCI MMIO
  tests: Adjust tco-test to use qpci_legacy_iomap()
  libqos: Better handling of PCI legacy IO
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Fix build for less common build directories names

scripts/tracetool generates a C preprocessor macro from the name of the
build directory. Any characters which are possible in a directory name
but not allowed in a macro name must be substituted, otherwise builds
will fail.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

clean-up: removed duplicate #includes

Some files contain multiple #includes of the same header file.
Removed most of those unnecessary duplicate entries using
scripts/clean-includes.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Anand J <anand.indukala@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

scripts/clean-includes: added duplicate #include check

Enhance the clean-includes script to optionally check for duplicate #include
entries.

Script might output false positive entries as well. Such entries should
not be removed. So if it finds any duplicate entries script will
terminate with an exit status 1. Then each and every file should be
checked manually and corrected if necessary.

In order to enable the check use --check-dup-head option with
scripts/clean-includes.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Anand J <anand.indukala@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

monitor: deprecate 'default' option

This option does nothing since commit 06ac27f.  Deprecate it.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

qemu-ga: Remove stray 'q' in documentation

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

Makefile: Fix help text for target 'installer'

The NSIS based installer currently does not install qemu-ga.
It installs the executables and other files for the QEMU system emulation.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

s390: avoid always-true comparison in s390_pci_generate_fid()

Coverity points out that the comparison "fid <= ZPCI_MAX_FID"
in s390_pci_generate_fid() is always true (because fid
is 32 bits and ZPCI_MAX_FID is 0xffffffff). This isn't a
bug because the real loop termination condition is
expressed later via an "if (...) break;" inside the loop,
but it is a bit odd. Rephrase the loop to avoid the
unnecessary duplicate-but-never-true conditional.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

migration: Remove unneeded NULL check from migrate_fd_error()

All the callers of migrate_fd_error() pass a non-NULL
error parameter, and if any did pass NULL then we would
segfault in error_copy(), so remove the unnecessary
NULL check earlier in the function.
(Spotted by Coverity.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

scripts/hxtool: fix undefined behavour of echo

Avoid undefined behaviour of echo(1) with backslashes in arguments
The behaviour is implementation-defined, different /bin/sh's behave
differently.

Signed-off-by: Daniel Shahaf <danielsh@apache.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

qemu-options.hx: set: fix copy-paste error

Reported-By: Daniel Shahaf <danielsh@apache.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

usb: Change *_exitfn return type from int to void

The *_exitfn functions cannot fail and should not be
returning int.
This also removes the passthru_exitfn since this callback
does nothing as of now.
This was suggested as a Bite-sized task for code cleanup.
Signed-off-by: Akanksha Srivastava <akanksha.dlf@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

MAINTAINERS: qemu-trivial information

Information about "qemu-trivial" ML can be found in the wiki:

    http://wiki.qemu.org/Contribute/TrivialPatches

But the first place where a developer looks is the file MAINTAINERS.

This also allows the get_maintainer.pl script to display
the qemu-trivial ML address when the mail subject contains "trivial".

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

colo-compare: remove unused struct CompareChardevProps and 'props' variable

After commit 0a73336d, 'props' variable in find_and_check_chardev()
is unused. Remove it, togther with struct CompareChardevProps.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

milkymist-pfpu: fix potential integer overflow

Since the lm32 is a 32 bit architecture, just return a 32 bit value which
is then converted to a 64 bit value.

Spotted by coverity, CID 1005506.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

hw/block/nvme: Simplify if-statements a little bit

The condition  '!A || (A && B)' is equivalent to '!A || B'.

Buglink: https://bugs.launchpad.net/qemu/+bug/1464611
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

target-lm32: rewrite gen_compare()

Drop the rX, rY and rZ stuff and use dc->r{0,1,2} directly. This should
also fix the false positive in coverity CID 1005720.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

lm32: milkymist-tmu2: fix integer overflow

Don't truncate the multiplication and do a 64 bit one instead because
because the result is stored in a 64 bit variable.

Spotted by coverity, CID 1167561.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

target-lm32: disable asm logging via LOG_DIS()

The lm32 target already has a disassembler which logs the assembly
instructions with "-d in_asm". Therefore, turn of the LOG_DIS() macro to
prevent logging the assembly instructions twice. Also turn the macro in a
one which is always compiled to catch any errors while the macro is turned
off.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

target-lm32: swap operand of wcsr in LOG_DIS()

Be consistent with the reference manual.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

target-lm32: fix LOG_DIS operand order

The order of most opcodes with immediates was wrong (according to the
reference manual) in the (debug) logging. Additionally, one operand for the
andhi instruction was completly wrong. Fix these.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

target-lm32: fix style issue

Both branches of the ternary operator have the same expressions. Drop the
operator.

This fixes: https://bugs.launchpad.net/qemu/+bug/1414293

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

hw/tpm/tpm_passthrough: Simplify if-statements a little bit

The condition  '!A || (A && B)' is equivalent to '!A || B'

Buglink: https://bugs.launchpad.net/qemu/+bug/1464611
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

filter-dump: add missing "["

Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

hw/arm/tosa: Fix reset handling

Using the CPU reset handler for resets triggered by writing into
gpio pins other than GPIO01 is not appropriate and does not work,
since the reset triggered by writing into GPIO01 is configurable.
Use a separate reset handler for tosa to reset the entire system
and not just the CPU.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1477597646-24111-2-git-send-email-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/spitz: Fix reset handling

Using the CPU reset handler for resets triggered by writing into
gpio pins other than GPIO01 is not appropriate and does not work,
since the reset triggered by writing into GPIO01 is configurable.
Use a separate reset handler for spitz to reset the entire system
and not just the CPU.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1477597646-24111-1-git-send-email-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

arm: virt: add PMU property to mach-virt machine type

CPU vPMU is now turned ON by default, but this feature wasn't introduced
until virt-2.7 machine type. To solve this problem, this patch adds a
PMU option in machine state, which is used to control CPU's vPMU status.
This PMU option is not exposed to command line and is turned off in
virt-2.6 machine type.

Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-id: 1477463301-17175-3-git-send-email-wei@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

arm: Add an option to turn on/off vPMU support

This patch adds a pmu=[on/off] option to enable/disable vPMU support
in guest vCPU. It allows virt tools, such as libvirt, to determine the
exsitence of vPMU and configure it. Note this option is only available
for cortex-a57/cortex-53/ host CPUs, but unavailable on ARMv7 and other
processors. Also even though "pmu=" option is available for TCG mode,
setting it doesn't turn PMU on.

Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1477463301-17175-2-git-send-email-wei@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

char: cadence: correct reset value for baud rate registers

The Cadence UART device emulator stores 'baud rate generator'
and 'baud rate divider' values, used in computing speed, in two
registers. The device specification defines their range and
their reset value. Use their correct value when resetting the
device in cadence_uart_reset.

Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1477378140-2670-1-git-send-email-ppandit@redhat.com
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

versatilepb: do not run if user asks for more than 256MB RAM

The versatilepb physical address space layout only has
a 256MB region for RAM before the devices. Without a guard
on the amount of RAM requested by the user we would happily
create a RAM area that overlapped with the devices, resulting
in very confusing behaviour (typically a guest crash).

Report the problem to the user if they try to request more
RAM than the board can handle (as we do already for some
other board models).

Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 20161025093711.17407-1-jcd@tribudubois.net
[PMM: tidied up commit message, comments. Use error_report()
 rather than fprintf(stderr, ...).]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

hw/arm/pxa2xx: Set value default values for CCCR and CKEN on PXA255

The code used default values for PXA270 to configure CCCR. For PXA255,
the resulting register value is invalid (unsupported) and resulted
in a division by zero in the Linux kernel. Use default values from
datasheet instead.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1477361273-18888-1-git-send-email-linux@roeck-us.net
[PMM: fixed tabs-vs-spaces nit]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

arm: cubieboard: Add support for initrd

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1477361131-18752-1-git-send-email-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

i.MX: Fix GPIO ISR register write

Writing the ISR register is supposed to clear interrupt status bits,
not to set them.

This patch makes '-M sabrelite' work without devicetree changes (Linux
kernel versions 3.18 to 4.7 with imx_v6_v7_defconfig and up to v4.8 with
multi_v7_defconfig; mainline has different problems).

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1477361005-18646-1-git-send-email-linux@roeck-us.net
Acked-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/berrange/tags/pull-qio-2016-10-27-1' into staging

Merge qio 2016/10/27 v1

# gpg: Signature made Thu 27 Oct 2016 13:54:03 BST
# gpg:                using RSA key 0xBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg:                 aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E  8E3F BE86 EBB4 1510 4FDF

* remotes/berrange/tags/pull-qio-2016-10-27-1:
  main: set names for main loop sources created
  vnc: set name for all I/O channels created
  migration: set name for all I/O channels created
  char: set name for all I/O channels created
  nbd: set name for all I/O channels created
  io: add ability to set a name for IO channels
  io: Add a QIOChannelSocket cleanup test
  io: set LISTEN flag explicitly for listen sockets
  io: Introduce a qio_channel_set_feature() helper
  io: Use qio_channel_has_feature() where applicable
  io: Fix double shift usages on QIOChannel features

Conflicts:
qemu-char.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

aio: convert from RFifoLock to QemuRecMutex

It is simpler and a bit faster, and QEMU does not need the contention
callbacks (and thus the fairness) anymore.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-21-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>

qemu-thread: introduce QemuRecMutex

GRecMutex is new in glib 2.32, so we cannot use it.  Introduce
a recursive mutex in qemu-thread instead, which will be used
instead of RFifoLock.

Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-20-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>

iothread: release AioContext around aio_poll

This is the first step towards having fine-grained critical sections in
dataplane threads, which will resolve lock ordering problems between
address_space_* functions (which need the BQL when doing MMIO, even
after we complete RCU-based dispatch) and the AioContext.

Because AioContext does not use contention callbacks anymore, the
unit test has to be changed.

Previously applied as a0710f7995f914e3044e5899bd8ff6c43c62f916 and
then reverted.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-19-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>

block: only call aio_poll on the current thread's AioContext

aio_poll is not thread safe; for example bdrv_drain can hang if
the last in-flight I/O operation is completed in the I/O thread after
the main thread has checked bs->in_flight.

The bug remains latent as long as all of it is called within
aio_context_acquire/aio_context_release, but this will change soon.

To fix this, if bdrv_drain is called from outside the I/O thread,
signal the main AioContext through a dummy bottom half.  The event
loop then only runs in the I/O thread.

Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-18-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>

qemu-img: call aio_context_acquire/release around block job

This will be needed by bdrv_reopen_multiple, which calls
bdrv_drain_all and thus will *release* the AioContext.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-17-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>

qemu-io: acquire AioContext

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-16-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>

block: prepare bdrv_reopen_multiple to release AioContext

After the next patch bdrv_drain_all will have to be called without holding any
AioContext.  Prepare to do this by adding an AioContext argument to
bdrv_reopen_multiple.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-15-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>

replication: pass BlockDriverState to reopen_backing_file

This will be needed in the next patch to retrieve the AioContext.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-14-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>