Nick Clifton [Wed, 16 May 2012 10:53:49 +0000 (10:53 +0000)]
* arm-dis.c (arm_opcodes): Don't disassemble STMFD/LDMIA sp!, {reg}
to PUSH/POP {reg}.
* binutils-all/arm/objdump.exp:
STMFD/LDMIA sp!, {reg} don't disassemble to PUSH/POP {reg} any longer.
* gas/arm/stm-ldm.d: STMFD/LDMIA sp!, {reg} don't disassemble to
PUSH/POP {reg} any longer. Some new test cases have been added as well.
* gas/arm/stm-ldm.s: Likewise.
Nick Clifton [Wed, 16 May 2012 10:43:41 +0000 (10:43 +0000)]
PR ld/14069
* emultempl/elf32.em: Include *-*-gnu* targets in ld.so.conf
support.
Nathan Sidwell [Wed, 16 May 2012 10:26:47 +0000 (10:26 +0000)]
* config/tc-m68k.c (m68k_cpus): Add 51ag, 51je, 51jf, 51jg, 51mm,
51qm variants.
Alan Modra [Wed, 16 May 2012 03:35:29 +0000 (03:35 +0000)]
PR ld/13962
PR ld/7023
* elf.c (bfd_section_from_shdr): Fail when .dynsym sh_info is
out of range. As a special case, fix sh_info for zero sh_size.
Do the same for .symtab.
Alan Modra [Wed, 16 May 2012 00:00:04 +0000 (00:00 +0000)]
daily update
gdbadmin [Wed, 16 May 2012 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Tom Tromey [Tue, 15 May 2012 20:26:10 +0000 (20:26 +0000)]
* python/python.c (gdbpy_find_pc_line): Use gdb_py_ulongest.
Sean Keys [Tue, 15 May 2012 18:34:23 +0000 (18:34 +0000)]
Rewrote a loop that caused a seg fault on Windows systems.
Joel Brobecker [Tue, 15 May 2012 16:42:43 +0000 (16:42 +0000)]
init_breakpoint_sal: Add quotes around part of command in error message
gdb/ChangeLog:
* breakpoint.c (init_breakpoint_sal): Add quotes around part
of command in two error message.
Joel Brobecker [Tue, 15 May 2012 14:48:19 +0000 (14:48 +0000)]
Remove trailing spaces in breakpoint.c:init_breakpoint_sal
gdb/ChangeLog:
* breakpoint.c (init_breakpoint_sal): Remove trailing spaces.
Joel Brobecker [Tue, 15 May 2012 14:33:31 +0000 (14:33 +0000)]
Minor style fixes in breakpoint.c:find_condition_and_thread
Mostly removing trailing spaces at end of lines, and also adding
an empty line after the function's documentation.
gdb/ChangeLog:
* breakpoint.c (find_condition_and_thread): Minor reformatting.
Jan Kratochvil [Tue, 15 May 2012 13:36:18 +0000 (13:36 +0000)]
gdb/testsuite/
* gdb.base/dprintf.exp: Remove now redundant breakpoint for main.
Jan Kratochvil [Tue, 15 May 2012 13:08:58 +0000 (13:08 +0000)]
gdb/testsuite/
PR testsuite/12649
* gdb.base/dprintf.exp: Replace gdb_run_cmd by runto main.
Nick Clifton [Tue, 15 May 2012 12:55:51 +0000 (12:55 +0000)]
* config/tc-m68hc11.c: Add S12X and XGATE co-processor support.
Add option to offset S12 addresses into XGATE memory space.
Tweak target flags to match other tools. (i.e. -m m68hc11).
* doc/as.texinfo: Mention new options.
* doc/c-m68hc11.texi: Document new options.
* NEWS: Mention new support.
* archures.c: Add bfd_arch_m9s12x and bfd_arch_m9s12xg.
* config.bfd: Likewise.
* cpu-m9s12x.c: New.
* cpu-m9s12xg.c: New.
* elf32-m68hc12.c: Add S12X and XGATE co-processor support.
Add option to offset S12 addresses into XGATE memory space.
Fix carry bug in IMM16 (IMM8 low/high) relocate.
* Makefile.am (ALL_MACHINES): Add cpu-m9s12x and cpu-m9s12xg.
(ALL_MACHINES_CFILES): Likewise.
* reloc.c: Add S12X relocs.
* Makefile.in: Regenerate.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* gas/m68hc11/insns9s12x.s: New
* gas/m68hc11/insns9s12x.d: New
* gas/m68hc11/hexprefix.s: New
* gas/m68hc11/hexprefix.d: New
* gas/m68hc11/9s12x-exg-sex-tfr.s: New
* gas/m68hc11/9s12x-exg-sex-tfr.d: New
* gas/m68hc11/insns9s12xg.s: New
* gas/m68hc11/insns9s12xg.d: New
* gas/m68hc11/9s12x-mov.s: New
* gas/m68hc11/9s12x-mov.d: New
* gas/m68hc11/m68hc11.exp: Updated
* gas/m68hc11/*.d: Brought in line with changed objdump output.
* gas/all/gas.exp: XFAIL all hc11/12 targets for redef2,3.
* gas/elf/elf.exp: XFAIL all hc11/12 targets for redef.
* gas/elf/dwarf2-1.d: Skip for hc11/12 targets.
* gas/elf/dwarf2-2.d: Likewise.
* ld-m68hc11/xgate-link.s: New.
* ld-m68hc11/xgate-link.d: New.
* ld-m68hc11/xgate-offset.s: New.
* ld-m68hc11/xgate-offset.d: New.
* ld-m68hc11/xgate1.s: New.
* ld-m68hc11/xgate1.d: New.
* ld-m68hc11/xgate2.s: New.
* ld-m68hc11/m68hc11.exp: Updated.
* ld-m68hc11/*.d: Brought in line with changed objdump output.
* ld-gc/gc.exp: Update CFLAGS for m68hc11.
* ld-plugin/plugin.exp: Likewise.
* ld-srec/srec.exp: XFAIL for m68hc11 and m68hc12.
* configure.in: Add S12X and XGATE co-processor support to m68hc11
target.
* disassemble.c: Likewise.
* configure: Regenerate.
* m68hc11-dis.c: Make objdump output more consistent, use hex
instead of decimal and use 0x prefix for hex.
* m68hc11-opc.c: Add S12X and XGATE opcodes.
* dis-asm.h (print_insn_m9s12x): Prototype.
(print_insn_m9s12xg): Prototype.
* m68hc11.h (R_M68HC12_16B, R_M68HC12_PCREL_9, R_M68HC12_PCREL_10)
R_M68HC12_HI8XG, R_M68HC12_LO8XG): New relocations.
(E_M68HC11_XGATE_RAMOFFSET): Define.
* m68hc11.h: Add XGate definitions.
(struct m68hc11_opcode): Add xg_mask field.
Jan Kratochvil [Tue, 15 May 2012 04:12:17 +0000 (04:12 +0000)]
gdb/
* NEWS (show auto-load scripts-directory): Add forgotten command.
Jan Kratochvil [Tue, 15 May 2012 04:08:47 +0000 (04:08 +0000)]
gdb/
* spu-tdep.c (spu_catch_start): Update create_breakpoint caller
parameters.
David S. Miller [Tue, 15 May 2012 03:59:38 +0000 (03:59 +0000)]
Fix PLT section number regexps in sparc TLS tests.
ld/testsuite/
* ld-sparc/tlssunbin32.rd: Update.
* ld-sparc/tlssunbin64.rd: Likewise.
DJ Delorie [Tue, 15 May 2012 03:23:37 +0000 (03:23 +0000)]
* config/rx-parse.y (rx_range): declare.
(O1,O2,O3,O4): Add calls to rx_range.
(UO1,UO2,UO3): Likewise.
(IMM2,IMMB): Likewise.
(rx_range): New.
DJ Delorie [Tue, 15 May 2012 03:04:47 +0000 (03:04 +0000)]
* config/tc-rx.c (rx_fetchalign): Declare.
(md_pseudo_table): Add .fetchalign.
(RX_NBASE_FETCHALIGN): New.
(fetchalign_bytes): New.
(rx_fetchalign): New.
(rx_frag_init): If a "magic" value is found, also init the
machine-specific data.
(md_assemble): Note following opcode size if called for.
(rx_next_opcode): New.
(rx_relax_frag): Support .fetchalign.
(md_convert_frag): Likewise.
* doc/c-rx.texi (RX-Directives): Add .fetchalign.
Alan Modra [Tue, 15 May 2012 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Tue, 15 May 2012 00:00:02 +0000 (00:00 +0000)]
*** empty log message ***
Sergio Durigan Junior [Mon, 14 May 2012 20:33:16 +0000 (20:33 +0000)]
gdb/testsuite/ChangeLog:
2012-05-14 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/stap-probe.exp (stap_test): Remove calls to
`rerun_to_main'.
(stap_test_no_debuginfo): Likewise.
James Lemke [Mon, 14 May 2012 19:45:30 +0000 (19:45 +0000)]
Add support for PowerPC VLE.
2012-05-14 Catherine Moore <clm@codesourcery.com>
* NEWS: Mention PowerPC VLE port.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
Catherine Moore <clm@codesourcery.com>
bfd/
* bfd.c (bfd_lookup_section_flags): Add section parm.
* ecoff.c (bfd_debug_section): Remove flag_info initializer.
* elf-bfd.h (bfd_elf_section_data): Move in section_flag_info.
(bfd_elf_lookup_section_flags): Add section parm.
* elf32-ppc.c (is_ppc_vle): New function.
(ppc_elf_modify_segment_map): New function.
(elf_backend_modify_segment_map): Define.
(has_vle_insns): New define.
* elf32-ppc.h (ppc_elf_modify_segment_map): Declare.
* elflink.c (bfd_elf_lookup_section_flags): Add return value & parm.
Move in logic to omit / include a section.
* libbfd-in.h (bfd_link_info): Add section parm.
(bfd_generic_lookup_section_flags): Likewise.
* reloc.c (bfd_generic_lookup_section_flags): Likewise.
* section.c (bfd_section): Move out section_flag_info.
(BFD_FAKE_SECTION): Remove flag_info initializer.
* targets.c (_bfd_lookup_section_flags): Add section parm.
2012-05-14 Catherine Moore <clm@codesourcery.com>
bfd/
* archures.c (bfd_mach_ppc_vle): New.
* bfd-in2.h: Regenerated.
* cpu-powerpc.c (bfd_powerpc_archs): New entry for vle.
* elf32-ppc.c (split16_format_type): New enumeration.
(ppc_elf_vle_split16): New function.
(HOWTO): Add entries for R_PPC_VLE relocations.
(ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations.
(ppc_elf_section_flags): New function.
(ppc_elf_lookup_section_flags): New function.
(ppc_elf_section_processing): New function.
(ppc_elf_check_relocs): Handle PPC_VLE relocations.
(ppc_elf_relocation_section): Likewise.
(elf_backend_lookup_section_flags_hook): Define.
(elf_backend_section_flags): Define.
(elf_backend_section_processing): Define.
* elf32-ppc.h (ppc_elf_section_processing): Declare.
* libbfd.h: Regenerated.
* reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15,
BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A,
BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A,
BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A,
BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21,
BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A,
BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A,
BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A,
BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (insn_validate): New func of existing code to call..
(ppc_setup_opcodes): ..from 2 places here.
Revise for second (VLE) opcode table.
Add #ifdef'd code to print opcode tables.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
gas/
* config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order
for the VLE conditional branches.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/
* config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro.
(PPC_VLE_SPLIT16D): New macro.
(PPC_VLE_LO16A): New macro.
(PPC_VLE_LO16D): New macro.
(PPC_VLE_HI16A): New macro.
(PPC_VLE_HI16D): New macro.
(PPC_VLE_HA16A): New macro.
(PPC_VLE_HA16D): New macro.
(PPC_APUINFO_VLE): New definition.
(md_chars_to_number): New function.
(md_parse_option): Check for combinations of little
endian and -mvle.
(md_show_usage): Document -mvle.
(ppc_arch): Recognize VLE.
(ppc_mach): Recognize bfd_mach_ppc_vle.
(ppc_setup_opcodes): Print the opcode table if
* config/tc-ppc.h (ppc_frag_check): Declare.
* doc/c-ppc.texi: Document -mvle.
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
gas/
* config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare.
(DWARF2_LINE_MIN_INSN_LENGTH): Redefine.
* config/tc-ppc.c (ppc_dw2_line_min_insn_length): New.
* dwarf2dbg.c (scale_addr_delta): Handle values of 1
for DWARF2_LINE_MIN_INSN_LENGTH.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
gas/testsuite/
* gas/ppc/ppc.exp: Run new tests.
* gas/ppc/vle-reloc.d: New test.
* gas/ppc/vle-reloc.s: New test.
* gas/ppc/vle-simple-1.d: New test.
* gas/ppc/vle-simple-1.s: New test.
* gas/ppc/vle-simple-2.d: New test.
* gas/ppc/vle-simple-2.s: New test.
* gas/ppc/vle-simple-3.d: New test.
* gas/ppc/vle-simple-3.s: New test.
* gas/ppc/vle-simple-4.d: New test.
* gas/ppc/vle-simple-4.s: New test.
* gas/ppc/vle-simple-5.d: New test.
* gas/ppc/vle-simple-5.s: New test.
* gas/ppc/vle-simple-6.d: New test.
* gas/ppc/vle-simple-6.s: New test.
* gas/ppc/vle.d: New test.
* gas/ppc/vle.s: New test.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (SEC_PPC_VLE): Remove.
2012-05-14 Catherine Moore <clm@codesourcery.com>
James Lemke <jwlemke@codesourcery.com>
include/elf/
* ppc.h (R_PPC_VLE_REL8): New reloction.
(R_PPC_VLE_REL15): Likewise.
(R_PPC_VLE_REL24): Likewise.
(R_PPC_VLE_LO16A): Likewise.
(R_PPC_VLE_LO16D): Likewise.
(R_PPC_VLE_HI16A): Likewise.
(R_PPC_VLE_HI16D): Likewise.
(R_PPC_VLE_HA16A): Likewise.
(R_PPC_VLE_HA16D): Likewise.
(R_PPC_VLE_SDA21): Likewise.
(R_PPC_VLE_SDA21_LO): Likewise.
(R_PPC_VLE_SDAREL_LO16A): Likewise.
(R_PPC_VLE_SDAREL_LO16D): Likewise.
(R_PPC_VLE_SDAREL_HI16A): Likewise.
(R_PPC_VLE_SDAREL_HI16D): Likewise.
(R_PPC_VLE_SDAREL_HA16A): Likewise.
(R_PPC_VLE_SDAREL_HA16D): Likewise.
(SEC_PPC_VLE): Remove.
(PF_PPC_VLE): New program header flag.
(SHF_PPC_VLE): New section header flag.
(vle_opcodes, vle_num_opcodes): New.
(VLE_OP): New macro.
(VLE_OP_TO_SEG): New macro.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
include/opcode/
* ppc.h (PPC_OPCODE_VLE): New definition.
(PPC_OP_SA): New macro.
(PPC_OP_SE_VLE): New macro.
(PPC_OP): Use a variable shift amount.
(powerpc_operand): Update comments.
(PPC_OPSHIFT_INV): New macro.
(PPC_OPERAND_CR): Replace with...
(PPC_OPERAND_CR_BIT): ...this and
(PPC_OPERAND_CR_REG): ...this.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/
* ldlang.c (walk_wild_consider_section): Don't copy section_flag_list.
Pass it to callback.
(walk_wild_section_general): Pass section_flag_list to callback.
(lang_add_section): Add sflag_list parm.
Move out logic to keep / omit a section & call bfd_lookup_section_flags.
(output_section_callback_fast): Add sflag_list parm.
Add new parm to lang_add_section calls.
(output_section_callback): Likewise.
(check_section_callback): Add sflag_list parm.
(lang_place_orphans): Add new parm to lang_add_section calls.
(gc_section_callback): Add sflag_list parm.
(find_relro_section_callback): Likewise.
* ldlang.h (callback_t): Add flag_info parm.
(lang_add_section): Add sflag_list parm.
* emultempl/armelf.em (elf32_arm_add_stub_section):
Add lang_add_section parm.
* emultempl/beos.em (gld*_place_orphan): Likewise.
* emultempl/elf32.em (gld*_place_orphan): Likewise.
* emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise.
* emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise.
* emultempl/mipself.em (mips_add_stub_section): Likewise.
* emultempl/mmo.em (mmo_place_orphan): Likewise.
* emultempl/pe.em (gld_*_place_orphan): Likewise.
* emultempl/pep.em (gld_*_place_orphan): Likewise.
* emultempl/ppc64elf.em (ppc_add_stub_section): Likewise.
* emultempl/spuelf.em (spu_place_special_section): Likewise.
* emultempl/vms.em (vms_place_orphan): Likewise.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
ld/testsuite/
* ld-powerpc/powerpc.exp: Create ppceabitests.
* ld-powerpc/vle-multiseg.s: New.
* ld-powerpc/vle-multiseg-1.d: New.
* ld-powerpc/vle-multiseg-1.ld: New.
* ld-powerpc/vle-multiseg-2.d: New.
* ld-powerpc/vle-multiseg-2.ld: New.
* ld-powerpc/vle-multiseg-3.d: New.
* ld-powerpc/vle-multiseg-3.ld: New.
* ld-powerpc/vle-multiseg-4.d: New.
* ld-powerpc/vle-multiseg-4.ld: New.
* ld-powerpc/vle-multiseg-5.d: New.
* ld-powerpc/vle-multiseg-5.ld: New.
* ld-powerpc/vle-multiseg-6.d: New.
* ld-powerpc/vle-multiseg-6.ld: New.
* ld-powerpc/vle-multiseg-6a.s: New.
* ld-powerpc/vle-multiseg-6b.s: New.
* ld-powerpc/vle-multiseg-6c.s: New.
* ld-powerpc/vle-multiseg-6d.s: New.
* ld-powerpc/powerpc.exp: Run new tests.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/
* NEWS: Mention PowerPC VLE port.
2012-05-14 Catherine Moore <clm@codesourcery.com>
ld/testsuite/
* ld-powerpc/apuinfo.rd: Update for VLE.
* ld-powerpc/vle-reloc-1.d: New.
* ld-powerpc/vle-reloc-1.s: New.
* ld-powerpc/vle-reloc-2.d: New.
* ld-powerpc/vle-reloc-2.s: New.
* ld-powerpc/vle-reloc-3.d: New.
* ld-powerpc/vle-reloc-3.s: New.
* ld-powerpc/vle-reloc-def-1.s: New.
* ld-powerpc/vle-reloc-def-2.s: New.
* ld-powerpc/vle-reloc-def-3.s: New.
2012-05-14 James Lemke <jwlemke@codesourcery.com>
opcodes/
* ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle.
(PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines.
(vle_opcd_indices): New array.
(lookup_vle): New function.
(disassemble_init_powerpc): Revise for second (VLE) opcode table.
(print_insn_powerpc): Likewise.
* ppc-opc.c: Likewise.
2012-05-14 Catherine Moore <clm@codesourcery.com>
Maciej W. Rozycki <macro@codesourcery.com>
Rhonda Wittels <rhonda@codesourcery.com>
Nathan Froyd <froydnj@codesourcery.com>
opcodes/
* ppc-opc.c (insert_arx, extract_arx): New functions.
(insert_ary, extract_ary): New functions.
(insert_li20, extract_li20): New functions.
(insert_rx, extract_rx): New functions.
(insert_ry, extract_ry): New functions.
(insert_sci8, extract_sci8): New functions.
(insert_sci8n, extract_sci8n): New functions.
(insert_sd4h, extract_sd4h): New functions.
(insert_sd4w, extract_sd4w): New functions.
(insert_vlesi, extract_vlesi): New functions.
(insert_vlensi, extract_vlensi): New functions.
(insert_vleui, extract_vleui): New functions.
(insert_vleil, extract_vleil): New functions.
(BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT.
(BI16, BI32, BO32, B8): New.
(B15, B24, CRD32, CRS): New.
(CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG.
(DB, IMM20, RD, Rx, ARX, RY, RZ): New.
(ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New.
(SH6_MASK): Use PPC_OPSHIFT_INV.
(SI8, UI5, OIMM5, UI7, BO16): New.
(VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New.
(XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV.
(ALLOW8_SPRG): New.
(insert_sprg, extract_sprg): Check ALLOW8_SPRG.
(OPVUP, OPVUP_MASK OPVUP): New
(BD8, BD8_MASK, BD8IO, BD8IO_MASK): New.
(EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New.
(BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New.
(BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New.
(IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New.
(IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New.
(SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New.
(SE_IM5, SE_IM5_MASK): New.
(SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New.
(EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New.
(BO32DNZ, BO32DZ): New.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE.
(PPCVLE): New.
(powerpc_opcodes): Add new VLE instructions. Update existing
instruction to include PPCVLE if supported.
* ppc-dis.c (ppc_opts): Add vle entry.
(get_powerpc_dialect): New function.
(powerpc_init_dialect): VLE support.
(print_insn_big_powerpc): Call get_powerpc_dialect.
(print_insn_little_powerpc): Likewise.
(operand_value_powerpc): Handle negative shift counts.
(print_insn_powerpc): Handle 2-byte instruction lengths.
H.J. Lu [Mon, 14 May 2012 18:56:40 +0000 (18:56 +0000)]
Call initialize_tdesc_x32/initialize_tdesc_x32_avx
* amd64-tdep.c: Include features/i386/x32.c and
features/i386/x32-avx.c.
(_initialize_amd64_tdep): Call initialize_tdesc_x32 and
initialize_tdesc_x32_avx.
Cary Coutant [Mon, 14 May 2012 17:35:43 +0000 (17:35 +0000)]
gold/
* layout.cc (Layout::make_output_section): Mark .tdata section
as RELRO.
* testsuite/relro_test.cc: Add a TLS variable.
Stan Shebs [Mon, 14 May 2012 15:38:41 +0000 (15:38 +0000)]
2012-05-14 Stan Shebs <stan@codesourcery.com>
Add dynamic printf.
* breakpoint.h (enum bptype): New type bp_dprintf.
(struct breakpoint): New field extra_string.
(struct breakpoint_ops): Add arg to create_breakpoints_sal.
(create_breakpoint): Add extra_string arg.
* breakpoint.c (dprintf_breakpoint_ops): New.
(is_breakpoint): Add bp_dprintf.
(bpstat_what): Add dprintf case.
(bptype_string): Ditto.
(print_one_breakpoint_location): Ditto.
(init_bp_location): Ditto.
(bkpt_print_mention): Ditto.
(dprintf_style_enums): New array.
(dprintf_style): New global.
(dprintf_function): New global.
(dprintf_channel): New global.
(update_dprintf_command_list): New function.
(update_dprintf_commands): New function.
(init_breakpoint_sal): Add extra_string argument, handle it.
(create_breakpoint_sal): Add extra_string argument.
(create_breakpoints_sal): Add extra_string argument, update callers.
(find_condition_and_thread): Add extra argument.
(create_breakpoint): Add extra_string argument, record it.
(dprintf_command): New function.
(break_command_1): Add arg to create_breakpoint call.
(handle_gnu_v3_exceptions): Ditto.
(trace_command): Ditto.
(ftrace_command): Ditto.
(strace_command): Ditto.
(bkpt_print_mention): Add dprintf case.
(create_breakpoint_sal_default): Add extra_string argument.
(_initialize_breakpoint): Add new commands.
* mi/mi-cmd-break.c (mi_cmd_break_insert): Add arg to call.
* python/py-breakpoint.c (bppy_init): Ditto.
* python/py-finishbreakpoint.c (bpfinishpy_init): Ditto.
* gdb.texinfo (Dynamic Printf): New subsection.
* gdb.base/dprintf.c: New file.
* gdb.base/dprintf.exp: New file.
H.J. Lu [Mon, 14 May 2012 12:23:14 +0000 (12:23 +0000)]
Expect addend as signed
* gas/cris/rd-pic-1.d: Expect addend as signed.
* gas/cris/rd-tls-1.d: Likewise.
* gas/cris/rd-tls-2.d: Likewise.
Maciej W. Rozycki [Mon, 14 May 2012 09:32:03 +0000 (09:32 +0000)]
* mips-tdep.c (mips_push_dummy_code): Correct description typo.
Siva Chandra Reddy [Mon, 14 May 2012 03:06:47 +0000 (03:06 +0000)]
2012-05-14 Siva Chandra Reddy <sivachandra@google.com>
* python/python.c (gdbpy_find_pc_line): Use ULONGEST instead of
unsigned long long.
H.J. Lu [Mon, 14 May 2012 02:40:00 +0000 (02:40 +0000)]
Print addend as signed in objdump
binutils/
* objdump.c (disassemble_bytes): Print addend as signed.
(dump_reloc_set): Likewise.
gas/testsuite/
* gas/all/fwdexp.d: Expect addend as signed.
* gas/alpha/elf-reloc-1.d: Likewise.
* gas/i386/mixed-mode-reloc64.d: Likewise.
* gas/i386/reloc64.d: Likewise.
* gas/i386/ilp32/mixed-mode-reloc64.d: Expect addend as signed.
* gas/i386/ilp32/reloc64.d: Likewise.
* gas/ia64/pcrel.d: Likewise.
* gas/mips/branch-misc-2-64.d: Likewise.
* gas/mips/branch-misc-2pic-64.d: Likewise.
* gas/mips/branch-misc-4-64.d: Likewise.
* gas/mips/ldstla-n64-sym32.d: Likewise.
* gas/mips/micromips@branch-misc-2-64.d: Likewise.
* gas/mips/micromips@branch-misc-2pic-64.d: Likewise.
* gas/mips/micromips@branch-misc-4-64.d: Likewise.
* gas/mips/mips16-hilo-n32.d: Likewise.
* gas/ppc/astest.d: Likewise.
* gas/ppc/astest2.d: Likewise.
* gas/ppc/astest2_64.d: Likewise.
* gas/ppc/astest64.d: Likewise.
* gas/ppc/test1elf32.d: Likewise.
* gas/ppc/test1elf64.d: Likewise.
* gas/sparc/reloc64.d: Likewise.
Hui Zhu [Mon, 14 May 2012 02:20:54 +0000 (02:20 +0000)]
2012-05-11 Hui Zhu <hui_zhu@mentor.com>
* gdb.trace/Makefile.in (PROGS): Add disconnected-tracing.
* gdb.trace/disconnected-tracing.c: New file.
* gdb.trace/disconnected-tracing.exp: New file.
gdbadmin [Mon, 14 May 2012 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Mon, 14 May 2012 00:00:04 +0000 (00:00 +0000)]
daily update
Siva Chandra Reddy [Sun, 13 May 2012 11:33:44 +0000 (11:33 +0000)]
2012-05-13 Siva Chandra Reddy <sivachandra@google.com>
Add a new function gdb.find_pc_line to the Python API.
* NEWS (Python Scripting): Add entry about the new function.
* python/python.c (gdbpy_find_pc_line): New function which
implements gdb.find_pc_line.
(GdbMethods): Add entry for the new function.
doc/
* gdb.texinfo (Basic Python): Add description about the function
gdb.find_pc_line
testsuite/
* gdb.python/python.c: Add a new breakpoint comment.
* gdb.python/python.exp: Add tests to test gdb.find_pc_line.
Richard Sandiford [Sun, 13 May 2012 09:55:45 +0000 (09:55 +0000)]
ld/testsuite/
* ld-mips-elf/mips-elf.exp (mips16_call_global_test): Use the
no-shared-1.ld linker script.
* ld-mips-elf/mips16-call-global-1.s: Add alignment directive.
* ld-mips-elf/mips16-call-global-2.s: Likewise.
* ld-mips-elf/mips16-call-global-3.s: Likewise.
* ld-mips-elf/mips16-call-global.d: Use 50000 as the base address.
Richard Sandiford [Sun, 13 May 2012 09:51:40 +0000 (09:51 +0000)]
ld/testsuite/
* ld-mips-elf/attr-gnu-4-00.d: Remove assembler options and emulator
linker option.
* ld-mips-elf/attr-gnu-4-01.d, ld-mips-elf/attr-gnu-4-02.d,
ld-mips-elf/attr-gnu-4-03.d, ld-mips-elf/attr-gnu-4-04.d,
ld-mips-elf/attr-gnu-4-05.d, ld-mips-elf/attr-gnu-4-10.d,
ld-mips-elf/attr-gnu-4-11.d, ld-mips-elf/attr-gnu-4-12.d,
ld-mips-elf/attr-gnu-4-13.d, ld-mips-elf/attr-gnu-4-14.d,
ld-mips-elf/attr-gnu-4-15.d, ld-mips-elf/attr-gnu-4-20.d,
ld-mips-elf/attr-gnu-4-21.d, ld-mips-elf/attr-gnu-4-22.d,
ld-mips-elf/attr-gnu-4-23.d, ld-mips-elf/attr-gnu-4-24.d,
ld-mips-elf/attr-gnu-4-25.d, ld-mips-elf/attr-gnu-4-30.d,
ld-mips-elf/attr-gnu-4-31.d, ld-mips-elf/attr-gnu-4-32.d,
ld-mips-elf/attr-gnu-4-33.d, ld-mips-elf/attr-gnu-4-34.d,
ld-mips-elf/attr-gnu-4-35.d, ld-mips-elf/attr-gnu-4-40.d,
ld-mips-elf/attr-gnu-4-41.d, ld-mips-elf/attr-gnu-4-42.d,
ld-mips-elf/attr-gnu-4-43.d, ld-mips-elf/attr-gnu-4-44.d,
ld-mips-elf/attr-gnu-4-45.d, ld-mips-elf/attr-gnu-4-51.d: Likewise.
Richard Sandiford [Sun, 13 May 2012 09:45:45 +0000 (09:45 +0000)]
ld/testsuite/
* ld-mips-elf/eh-frame1.ld (.gcc_compiled_long32): Add KEEP.
* ld-mips-elf/eh-frame3.d: Move definition of foo to the link line
and change to a 32-bit value. Expect CIEs to be marged.
* ld-mips-elf/eh-frame4.d: Move definition of foo to the link line.
Alan Modra [Sun, 13 May 2012 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Sun, 13 May 2012 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Jan Kratochvil [Sat, 12 May 2012 14:20:31 +0000 (14:20 +0000)]
gdb/doc/
* gdb.texinfo (Separate Debug Files): Use plural form for global
debugging information directory.
H.J. Lu [Sat, 12 May 2012 13:46:26 +0000 (13:46 +0000)]
Adjust testcases for readelf addend change
gas/testsuite/
* gas/mips/elf-rel10.d: Updated.
* gas/mips/elf-rel22.d: Likewise.
* gas/mmix/comment-1.d: Likewise.
ld/testsuite/
* ld-alpha/tlspic.rd: Updated.
* ld-powerpc/tlsso.r: Likewise.
* ld-powerpc/tlsso32.r: Likewise.
* ld-powerpc/vxworks1-lib.rd: Likewise.
* ld-s390/tlspic.rd: Likewise.
* ld-s390/tlspic_64.rd: Likewise.
* ld-sh/shared-1.d: Likewise.
* ld-sh/tlspic-2.d: Likewise.
* ld-sparc/tlssunnopic32.rd: Likewise.
* ld-sparc/tlssunnopic64.rd: Likewise.
* ld-sparc/tlssunpic32.rd: Likewise.
* ld-sparc/tlssunpic64.rd: Likewise.
H.J. Lu [Sat, 12 May 2012 12:34:37 +0000 (12:34 +0000)]
Remove x32 addend overflow for BFD_RELOC_64
gas/
* config/tc-i386.c (tc_gen_reloc): Remove x32 addend overflow
for BFD_RELOC_64.
gas/testsuite/
* gas/i386/ilp32/ilp32.exp: Don't run reloc64-inval.
* gas/i386/ilp32/reloc64.s: Add test for -
4294967295 addend.
* gas/i386/ilp32/reloc64.d: Updated.
* gas/i386/ilp32/reloc64-inval.l: Removed.
* gas/i386/ilp32/reloc64-inval.s: Likewise.
Pedro Alves [Sat, 12 May 2012 08:54:03 +0000 (08:54 +0000)]
2012-05-12 Pedro Alves <palves@redhat.com>
* amd64-linux-tdep.c (_initialize_amd64_linux_tdep): Call
initialize_tdesc_x32_linux and initialize_tdesc_x32_avx_linux.
Eli Zaretskii [Sat, 12 May 2012 06:35:08 +0000 (06:35 +0000)]
src/inferior.c: Include completer.h
(initialize_inferiors): Set completer of add-inferior to filename_completer.
Mike Frysinger [Sat, 12 May 2012 03:10:17 +0000 (03:10 +0000)]
MAINTAINERS: clarify policy with config/ (and other top level files)
Rather than copy & paste more text, just merge the existing config/
section with the existing intl/ section. This ends up clarifying
the policy with that subdir (and top level files) that any commit
made to gcc's repo is allowed to be merged with the sourceware tree
without pre-approval.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
H.J. Lu [Sat, 12 May 2012 01:12:14 +0000 (01:12 +0000)]
Adjust testcases for readelf addend change
* ld-cris/hiddef1.d: Updated.
* ld-cris/libdso-2.d: Likewise.
* ld-cris/tls-js1.d: Likewise.
* ld-cris/tls-local-63.d: Likewise.
* ld-cris/tls-local-64.d: Likewise.
Alan Modra [Sat, 12 May 2012 00:00:05 +0000 (00:00 +0000)]
daily update
gdbadmin [Sat, 12 May 2012 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
H.J. Lu [Fri, 11 May 2012 22:33:28 +0000 (22:33 +0000)]
Check gdbarch_ptr_bit for x32 core dump
* amd64-linux-tdep.c (amd64_linux_core_read_description): Check
gdbarch_ptr_bit for x32 core dump.
H.J. Lu [Fri, 11 May 2012 22:31:27 +0000 (22:31 +0000)]
Include 32-linux.c and x32-avx-linux.c
* amd64-linux-tdep.c: Include features/i386/x32-linux.c
and features/i386/x32-avx-linux.c.
Stan Shebs [Fri, 11 May 2012 22:24:24 +0000 (22:24 +0000)]
2012-05-11 Stan Shebs <stan@codesourcery.com>
Kwok Cheung Yeung <kcy@codesourcery.com>
* NEWS: Describe new info os commands.
* common/linux-osdata.c (PID_T, TIME_T): Define.
(MAX_PID_T_STRLEN): New.
(linux_common_core_of_thread): Add comment. Change to use PID_T and
MAX_PID_T_STRLEN.
(command_from_pid): Add comment. Change to use PID_T.
(commandline_from_pid): Change to use PID_T.
(user_from_pid): Add comment.
(get_process_owner): Add comment. Change to use PID_T and
MAX_PID_T_STRLEN.
(get_number_of_cpu_cores): Add comment.
(get_cores_used_by_process): Add comment. Change to use PID_T and
MAX_PID_T_STRLEN.
(linux_xfer_osdata_processes): Change to use PID_T and
MAX_PID_T_STRLEN.
(compare_processes): New function.
(linux_xfer_osdata_processgroups): New function.
(linux_xfer_osdata_threads): Change to use PID_T.
(linux_xfer_osdata_fds): New function.
(format_socket_state, print_sockets): New functions.
(union socket_addr): New union.
(linux_xfer_osdata_isockets): New function.
(time_from_time_t, group_from_gid): New functions.
(linux_xfer_osdata_shm): New function.
(linux_xfer_osdata_sem): New function.
(linux_xfer_osdata_msg): New function.
(linux_xfer_osdata_modules): New function.
(osdata_table): Add new entries.
* common/buffer.c (buffer_xml_printf): Add support for long and
long long format specifiers.
* gdb.texinfo (Operating System Auxiliary Information): Document new
'info os' subcommands.
* gdb.base/info-os.exp: New file.
* gdb.base/info-os.c: New file.
H.J. Lu [Fri, 11 May 2012 22:02:29 +0000 (22:02 +0000)]
Declare tdesc_x32_linux/tdesc_x32_avx_linux
* amd64-linux-tdep.h (tdesc_x32_linux): New.
(tdesc_x32_avx_linux): Likewise.
Jan Kratochvil [Fri, 11 May 2012 18:23:11 +0000 (18:23 +0000)]
gdb/doc/
* gdb.texinfo (Auto-loading, Init File in the Current Directory)
(libthread_db.so.1 file, objfile-gdb.gdb file, objfile-gdb.py file)
(dotdebug_gdb_scripts section): Add reference
to 'Auto-loading safe path'.
Jan Kratochvil [Fri, 11 May 2012 18:20:26 +0000 (18:20 +0000)]
gdb/
Implement multi-component --with-auto-load-dir.
* NEWS (set auto-load scripts-directory, --with-auto-load-dir): New
entries.
(--with-auto-load-safe-path): Update the default value description.
* auto-load.c (auto_load_dir, set_auto_load_dir, show_auto_load_dir):
New.
(auto_load_objfile_script): Add DEBUG_AUTO_LOAD output. Remove
GDB_DATADIR NULL check. Replace GDB_DATADIR/auto-load by
AUTO_LOAD_DIR. Support $ddir and multiple components in it.
(_initialize_auto_load): Initialize also auto_load_dir. Install new
"set auto-load scripts-directory".
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac (--with-auto-load-dir): New configure option.
(--auto-load-safe-path): Change the default to --with-auto-load-dir.
gdb/doc/
Implement multi-component --with-auto-load-dir.
* gdb.texinfo (Auto-loading): New references
for 'set auto-load scripts-directory'
and 'show auto-load scripts-directory'.
(Auto-loading safe path): Describe the new default. Move $ddir
substituation reference to 'objfile-gdb.py file'.
(objfile-gdb.py file): Describe script-name alias. Change real-name to
script-name. Describe new 'set auto-load scripts-directory'
and 'show auto-load scripts-directory'.
Cary Coutant [Fri, 11 May 2012 18:18:34 +0000 (18:18 +0000)]
* doc/binutils.texi: Add --dwarf-check option.
* dwarf.c (dwarf_check): New global flag.
(fetch_indexed_string): New function.
(fetch_indexed_value): New function.
(get_FORM_name): Add DW_FORM_GNU_str_index and DW_FORM_GNU_addr_index.
(decode_location_expression): Add DW_OP_GNU_addr_index.
(read_and_display_attr_value): Add DW_FORM_GNU_str_index,
DW_FORM_GNU_addr_index, DW_AT_GNU_addr_base, and DW_AT_GNU_ranges_base.
(get_AT_name): Add new attributes for Fission.
(process_debug_info): Load new debug sections for Fission.
(load_debug_info): Check for .debug_info.dwo section.
(display_loc_list, display_loc_list_dwo): New functions.
(display_debug_loc): Move logic to above two functions.
(display_debug_info): Choose abbrev section based on info section.
(display_debug_types): Likewise.
(display_trace_info): Likewise.
(comp_addr_base): New function.
(display_debug_addr): New function.
(display_debug_str_offsets): New function.
(display_debug_ranges): Allow missing range lists. Suppress
diagnostics if dwarf_check not set.
(debug_displays): Add column to select abbrev section.
* dwarf.h (enum dwarf_section_display_enum): Add new debug sections
for Fission.
(struct dwarf_section): Add abbrev_sec field.
(struct dwarf_section_display): New type.
(debug_info): Add addr_base, ranges_base fields.
(dwarf_check): New global variable.
* objdump.c (usage): Add --dwarf-check option.
(enum option_values): Add OPTION_DWARF_CHECK.
(long_options): Add --dwarf-check.
(main): Likewise.
* readelf.c (OPTION_DWARF_CHECK): New macro.
(options): Add --dwarf-check.
(parse_args): Likewise.
(process_section_headers): Use const_strneq instead of
streq.
Jan Kratochvil [Fri, 11 May 2012 18:13:26 +0000 (18:13 +0000)]
gdb/
Provide $ddir substitution for --with-auto-load-safe-path.
* NEWS (--with-auto-load-safe-path, --without-auto-load-safe-path): New
entries.
* auto-load.c: Include observer.h.
(auto_load_safe_path_vec_update): Call substitute_path_component for
each component. New variable ddir_subst.
(auto_load_gdb_datadir_changed): New function.
(set_auto_load_safe_path): Rename DEFAULT_AUTO_LOAD_SAFE_PATH to
AUTO_LOAD_SAFE_PATH. New comment.
(_initialize_auto_load): Rename DEFAULT_AUTO_LOAD_SAFE_PATH to
AUTO_LOAD_SAFE_PATH. Install auto_load_gdb_datadir_changed.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac (--auto-load-safe-path): Rename
DEFAULT_AUTO_LOAD_SAFE_PATH to AUTO_LOAD_SAFE_PATH. Default to
GDB_DATADIR/auto-load.
* defs.h (substitute_path_component): New declaration.
* top.c: Include observer.h.
(set_gdb_datadir): New function.
(init_main): Install it for "set data-directory".
* utils.c (substitute_path_component): New function.
gdb/doc/
Provide $ddir substitution for --with-auto-load-safe-path.
* gdb.texinfo (Auto-loading): Replace /usr/local by $ddir/auto-load.
(Auto-loading safe path): Likewise. Mention the default value,
$ddir substitution, --with-auto-load-safe-path and
--without-auto-load-safe-path.
* observer.texi (gdb_datadir_changed): New.
Jan Kratochvil [Fri, 11 May 2012 18:06:28 +0000 (18:06 +0000)]
gdb/
Make auto-load handle multiple components of DEBUG_FILE_DIRECTORY.
* auto-load.c (auto_load_objfile_script): Remove check for NULL
DEBUG_FILE_DIRECTORY. Handle multiple components of
DEBUG_FILE_DIRECTORY.
H.J. Lu [Fri, 11 May 2012 15:48:15 +0000 (15:48 +0000)]
Always display addend as signed hex number
binutils/
PR binutils/14088
* readelf.c (dump_relocations): Always display addend as
signed hex number.
ld/testsuite/
PR binutils/14088
* ld-ia64/tlspic.rd: Updated.
* ld-x86-64/tlsdesc-nacl.rd: Likewise.
* ld-x86-64/tlsdesc.rd: Likewise.
* ld-x86-64/tlspic-nacl.rd: Likewise.
* ld-x86-64/tlspic.rd: Likewise.
Nick Clifton [Fri, 11 May 2012 14:25:30 +0000 (14:25 +0000)]
PR binutils/14028
* configure.in: Invoke ACX_HEADER_STRING.
* configure: Regenerate.
* config.in: Regenerate.
* sysdep.h: If STRINGS_WITH_STRING is defined then include both
string.h and strings.h.
Pedro Alves [Fri, 11 May 2012 13:34:34 +0000 (13:34 +0000)]
2012-05-11 Yao Qi <yao@codesourcery.com>
Pedro Alves <palves@redhat.com>
* linux-low.c (enum stopping_threads_kind): New.
(stopping_threads): Change type to `enum stopping_threads_kind'.
(handle_extended_wait): If stopping and suspending threads, leave
the new_lwp suspended too.
(linux_wait_for_event): Adjust.
(stop_all_lwps): Set `stopping_threads' to
STOPPING_AND_SUSPENDING_THREADS or STOPPING_THREADS depending on
whether we're suspending threads or just stopping them. Assert no
recursion happens.
Nick Clifton [Fri, 11 May 2012 12:59:23 +0000 (12:59 +0000)]
PR 13503
* reloc.c: Add new ENUM for BFD_RELOC_AVR_8_LO,
BFD_RELOC_AVR_8_HI, BFD_RELOC_AVR_8_HHI.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenrate.
* elf32-avr.c (elf_avr_howto_table): Add entries for
R_AVR_8_LO8, R_AVR_8_HI8, R_AVR_8_HHI8.
(avr_reloc_map): Add RELOC mappings for R_AVR_8_LO8, R_AVR_8_HI8,
R_AVR_8_HHI8.
* config/tc-avr.c (exp_mod_pm): Remove variable.
(exp_mod_data_t): New typedef.
(pexp_mod_data, exp_mod_data): New variables.
(avr_parse_cons_expression): Scan through exp_mod_data[] to find
data expression modifiers "pm", "gs", "lo8", hi8", "hhi8", "hh8"
and set pexp_mod_data accordingly to be used in avr_cons_fix_new.
(avr_cons_fix_new): Handle new data expression modifiers shipped
in pexp_mod_data.
(md_apply_fix): Handle BFD_RELOC_AVR_8_LO, BFD_RELOC_AVR_8_HI,
BFD_RELOC_AVR_8_HHI.
* elf/avr.h (RELOC_NUMBERS): Add values for R_AVR_8_LO8,
R_AVR_8_HI8, R_AVR_8_HHI8.
H.J. Lu [Fri, 11 May 2012 11:10:19 +0000 (11:10 +0000)]
Handle R_X86_64_64 properly for x32
elfcpp/
PR gold/14091
* x86_64.h (R_X86_64_RELATIVE64): New.
gold/
PR gold/14091
* x86_64.cc (Target_x86_64::Scan::local): For x32, generate
R_X86_64_RELATIVE64 instead of R_X86_64_RELATIVE in case of
R_X86_64_64.
Nick Clifton [Fri, 11 May 2012 09:41:21 +0000 (09:41 +0000)]
PR binutils/14006
* arm-dis.c (print_insn): Fix detection of instruction mode in
files containing multiple executable sections.
H.J. Lu [Fri, 11 May 2012 00:50:43 +0000 (00:50 +0000)]
Use int and bfd_signed_vma in x32 addend overflow check
bfd/
* elf64-x86-64.c (elf_x86_64_relocate_section): Use int in x32
addend overflow check.
gas/
* config/tc-i386.c (tc_gen_reloc): Use bfd_signed_vma in x32
addend overflow check.
DJ Delorie [Fri, 11 May 2012 00:01:58 +0000 (00:01 +0000)]
* elf32-rx.c (rx_elf_object_p): Ignore empty segments.
Alan Modra [Fri, 11 May 2012 00:00:04 +0000 (00:00 +0000)]
daily update
gdbadmin [Fri, 11 May 2012 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
H.J. Lu [Thu, 10 May 2012 20:46:34 +0000 (20:46 +0000)]
Display signed hex number in x32 addend overflow check
bfd/
* elf64-x86-64.c (elf_x86_64_relocate_section): Display signed
hex number in x32 addend overflow check.
gas/
* config/tc-i386.c (tc_gen_reloc): Display signed hex number in
x32 addend overflow check.
ld/testsuite/
* ld-x86-64/ilp32-11.d: Updated.
Tom Tromey [Thu, 10 May 2012 20:17:51 +0000 (20:17 +0000)]
* dwarf2read.c (recursively_write_psymbols): New function.
(write_psymtabs_to_index): Use it.
* dwarf2read.c (struct dwarf2_queue_item) <pretend_language>: New
field.
(load_cu, dw2_do_instantiate_symtab, process_psymtab_comp_unit)
(load_partial_comp_unit): Update.
(queue_comp_unit): Add argument 'pretend_language'.
(process_queue): Update.
(psymtab_to_symtab_1): Skip dependencies that have a user.
(load_partial_comp_unit_reader): Give meaning to the 'data'
argument.
(load_full_comp_unit): Add 'pretend_language' argument.
(process_full_comp_unit): Add 'pretend_language' argument. Set
language on CU.
(process_imported_unit_die, read_file_scope, read_type_unit_scope):
Update.
(maybe_queue_comp_unit): Add 'pretend_language' argument.
(follow_die_offset, follow_die_sig, read_signatured_type_reader):
Update.
(prepare_one_comp_unit): Add 'pretend_language' argument.
* dwarf2read.c: (dwarf2_per_cu_ptr): New typedef.
(struct dwarf2_per_objfile) <just_read_cus>: New field.
(struct dwarf2_per_cu_data) <imported_symtabs>: New field.
(dw2_do_instantiate_symtab): Check whether symtab was read in
before queueing.
(dw2_instantiate_symtab): Add assertion. Call
process_cu_includes.
(process_psymtab_comp_unit): Compute 'dependencies' for psymtab.
(partial_symtab_p): New typedef.
(set_partial_user): New function.
(dwarf2_build_psymtabs_hard): Use set_partial_user.
(scan_partial_symbols): Add imported CU to imported_symtabs.
(dwarf2_psymtab_to_symtab): Call process_cu_includes.
(psymtab_to_symtab_1): Do nothing if psymtab is readin.
(get_symtab, recursively_compute_inclusions)
(compute_symtab_includes, process_cu_includes)
(process_imported_unit_die): New functions.
(process_die) <DW_TAG_imported_unit>: New case.
(dwarf2_per_objfile_free): Free 'imported_symtabs'.
* dwarf2read.c (struct dwarf2_per_cu_data) <psymtab>: Update
comment.
(struct partial_die_info) <locdesc>: Remove.
<d>: New field.
(process_psymtab_comp_unit): Add 'read_partial' argument.
Update.
(process_type_comp_unit, dwarf2_build_psymtabs_hard): Update.
(scan_partial_symbols): Handle DW_TAG_imported_unit.
(add_partial_symbol): Update.
(process_die): Handle DW_TAG_partial_unit.
(read_file_scope): Update comment.
(load_partial_dies): Handle DW_TAG_imported_unit.
(read_partial_die): Handle DW_TAG_partial_unit, DW_AT_import.
(determine_prefix, dwarf2_name): Handle DW_TAG_partial_unit.
Tom Tromey [Thu, 10 May 2012 20:07:02 +0000 (20:07 +0000)]
* cc-with-dwz.sh: New file.
Tom Tromey [Thu, 10 May 2012 20:04:00 +0000 (20:04 +0000)]
* symtab.h (struct symtab) <includes, user>: New fields.
* block.h (struct block_iterator) <d, idx, which>: New fields.
* block.c (initialize_block_iterator, find_iterator_symtab)
(block_iterator_step, block_iter_name_step)
(block_iter_match_step): New functions.
(block_iterator_first, block_iterator_next)
(block_iter_name_first, block_iter_name_next)
(block_iter_match_first, block_iter_match_next): Rewrite.
(get_block_symtab): New function.
Tom Tromey [Thu, 10 May 2012 19:59:12 +0000 (19:59 +0000)]
* jv-lang.c (get_java_class_symtab): Use allocate_global_block,
set_block_symtab.
* jit.c (finalize_symtab): Use allocate_global_block,
set_block_symtab.
* buildsym.c (finish_block_internal): New function, from old
finish_block.
(finish_block): Rewrite.
(end_symtab): Use finish_block_internal, set_block_symtab.
* block.h (struct global_block): New.
(allocate_global_block, set_block_symtab): Declare.
* block.c (allocate_global_block, set_block_symtab): New
functions.
Tom Tromey [Thu, 10 May 2012 19:54:45 +0000 (19:54 +0000)]
* psymtab.c (partial_map_expand_apply): Add assertion.
(partial_map_symtabs_matching_filename): Skip included psymtabs.
(psymtab_to_symtab): Find unshared psymtab.
(dump_psymtab): Print including psymtabs.
(recursively_search_psymtabs): New function.
(expand_symtabs_matching_via_partial): Use it.
* psympriv.h (struct partial_symtab) <user, searched_flag>: New
fields.
(enum psymtab_search_status): New.
Tom Tromey [Thu, 10 May 2012 19:50:09 +0000 (19:50 +0000)]
* tracepoint.c (scope_info): Update.
* symtab.c (lookup_block_symbol, iterate_over_symbols)
(find_pc_sect_symtab, search_symbols)
(default_make_symbol_completion_list_break_on)
(make_file_symbol_completion_list): Update.
* symmisc.c (dump_symtab_1): Update.
* stack.c (print_frame_args, iterate_over_block_locals)
(print_frame_labels, iterate_over_block_arg_vars): Update.
* python/py-block.c (block_object) <dict>: Remove.
<block>: New field.
<iter>: Change type.
(blpy_iter): Update.
(blpy_block_syms_iternext): Update.
* psymtab.c (map_block): Use block iterators.
* objfiles.c (objfile_relocate1): Use ALL_DICT_SYMBOLS.
* mi/mi-cmd-stack.c (list_args_or_locals): Update.
* mdebugread.c (parse_symbol, mylookup_symbol): Update.
* infrun.c (check_exception_resume): Update.
* cp-support.c (make_symbol_overload_list_block): Update.
* coffread.c (patch_opaque_types): Update.
* buildsym.c (finish_block, end_symtab): Use ALL_DICT_SYMBOLS.
* block.h (struct block_iterator): New.
(block_iterator_first, block_iterator_next, block_iter_name_first)
(block_iter_name_next, block_iter_match_first)
(block_iter_match_next): Declare.
(ALL_BLOCK_SYMBOLS): Redefine.
* block.c (block_iterator_first, block_iterator_next)
(block_iter_name_first, block_iter_name_next)
(block_iter_match_first, block_iter_match_next): New functions.
* ada-lang.c (ada_add_block_symbols)
(ada_make_symbol_completion_list): Use block iterator.
Tom Tromey [Thu, 10 May 2012 19:44:52 +0000 (19:44 +0000)]
* psymtab.c (PSYMTAB_TO_SYMTAB): Remove.
(find_pc_sect_symtab_from_partial, lookup_symbol_aux_psymtabs)
(lookup_partial_symbol, find_last_source_symtab_from_partial)
(read_psymtabs_with_filename, map_matching_symbols_psymtab)
(expand_symtabs_matching_via_partial, maintenance_check_symtabs):
Update.
H.J. Lu [Thu, 10 May 2012 17:15:19 +0000 (17:15 +0000)]
Count R_X86_64_RELATIVE64 as reloc_class_relative
bfd/
* elf64-x86-64.c (elf_x86_64_reloc_type_class): Handle
R_X86_64_RELATIVE64.
ld/testsuite/
* ld-x86-64/pr13082-1a.d: Check RELACOUNT.
* ld-x86-64/pr13082-1b.d: Likewise.
Joel Brobecker [Thu, 10 May 2012 16:25:19 +0000 (16:25 +0000)]
Add print 'file'::var testcase with two libs defining the same global variable
gdb/testsuite/ChangeLog:
* gdb.base/print-file-var-lib1.c, gdb.base/print-file-var-lib2.c,
gdb.base/print-file-var-main.c, gdb.base/print-file-var.exp:
New files.
gdb/ChangeLog:
* config/djgpp/fnchange.lst: Add entries for print-file-var-lib1.c,
print-file-var-lib2.c, print-file-var-main.c and
print-file-var.exp (located in gdb/testsuite/gdb.base).
Joel Brobecker [Thu, 10 May 2012 16:24:58 +0000 (16:24 +0000)]
New testcase: gdb.base/ctxobj.exp
gdb/testsuite/ChangeLog:
* gdb.base/ctxobj-f.c, gdb.base/ctxobj-m.c, gdb.base/ctxobj-v.c,
gdb.base/ctxobj.exp: New files.
Joel Brobecker [Thu, 10 May 2012 16:24:40 +0000 (16:24 +0000)]
Search global symbols from the expression's block objfile first.
gdb/ChangeLog:
* findvar.c (default_read_var_value): For LOC_UNRESOLVED symbols,
try locating the symbol in the symbol's own objfile first, before
extending the search to all objfiles.
* symtab.c (lookup_symbol_aux_objfile): New function, extracted
out of lookup_symbol_aux_symtabs.
(lookup_symbol_aux_symtabs): Add new parameter "exclude_objfile".
Replace extracted-out code by call to lookup_symbol_aux_objfile.
Do not search EXCLUDE_OBJFILE.
(lookup_static_symbol_aux): Update call to lookup_symbol_aux_symtabs.
(lookup_symbol_global): Search for matches in the block's objfile
first, before searching all other objfiles.
Tristan Gingold [Thu, 10 May 2012 14:10:38 +0000 (14:10 +0000)]
2012-05-10 Tristan Gingold <gingold@adacore.com>
* printcmd.c (set_command): Add pre/post inc/dec.
Nick Clifton [Thu, 10 May 2012 13:42:03 +0000 (13:42 +0000)]
PR bootstrap/50461
* configure.ac (mpfr-dir): When using in-tree MPFR sources
allow for the fact that from release v3.1.0 of MPFR the source
files were moved into a src sub-directory.
* configure: Regenerate.
Jakub Jelinek [Thu, 10 May 2012 06:18:48 +0000 (06:18 +0000)]
* dwarf.c (read_and_display_attr_value): Don't look up tag from
abbrev for DW_FORM_ref_addr.
H.J. Lu [Thu, 10 May 2012 03:48:33 +0000 (03:48 +0000)]
Use fits_in_signed_long to check x32 addend overflow
* config/tc-i386.c (tc_gen_reloc): Use fits_in_signed_long.
H.J. Lu [Thu, 10 May 2012 03:25:17 +0000 (03:25 +0000)]
Check 64-bit relocation addend overflow for x32
bfd/
* elf64-x86-64.c (elf_x86_64_relocate_section): Check addend
overflow for R_X86_64_RELATIVE64.
gas/
* config/tc-i386.c (tc_gen_reloc): Check x32 addend overflow
for BFD_RELOC_64.
gas/testsuite/
* gas/i386/ilp32/ilp32.exp: Run reloc64-inval.
* gas/i386/ilp32/reloc64.s: Add tests for ".quad".
* gas/i386/ilp32/reloc64.d: Updated.
* gas/i386/ilp32/reloc64-inval.l: New file.
* gas/i386/ilp32/reloc64-inval.s: Likewise.
ld/testsuite/
* ld-x86-64/ilp32-11.d: New file.
* ld-x86-64/ilp32-11.s: Likewise.
* ld-x86-64/x86-64.exp: Run ilp32-11.
gdbadmin [Thu, 10 May 2012 00:00:33 +0000 (00:00 +0000)]
*** empty log message ***
Alan Modra [Thu, 10 May 2012 00:00:05 +0000 (00:00 +0000)]
daily update
Frank Ch. Eigler [Wed, 9 May 2012 21:06:13 +0000 (21:06 +0000)]
2012-05-09 Frank Ch. Eigler <fche@redhat.com>
* gdb.1: Document -ex option.
Tom Tromey [Wed, 9 May 2012 20:24:08 +0000 (20:24 +0000)]
* gdb.trace/strace.exp: Add 'quiet' to compiler flags.
Jan Kratochvil [Wed, 9 May 2012 19:29:25 +0000 (19:29 +0000)]
gdb/doc/
* gdb.texinfo (Separate Debug Files, Auto-loading safe path): Replace
directory separator by path separator.
Jan Kratochvil [Wed, 9 May 2012 18:15:58 +0000 (18:15 +0000)]
gdb/doc/
* gdb.texinfo (Auto-loading): Wrap too long lines in @smallexample.
Twice.
Maciej W. Rozycki [Wed, 9 May 2012 14:29:49 +0000 (14:29 +0000)]
* lib/gdb.exp (gdb_test_multiple): Correct formatting.
Joel Brobecker [Wed, 9 May 2012 14:29:13 +0000 (14:29 +0000)]
Remove AT_SYMBOL
Now that this method is no longer used by any architecture,
we can remove its support.
gdb/ChangeLog:
* infcall.c (call_function_by_hand): Remove AT_SYMBOL handling.
* inferior.h (AT_SYMBOL): Delete.
Joel Brobecker [Wed, 9 May 2012 14:29:02 +0000 (14:29 +0000)]
mips: Switch inferior function calls to ON_STACK method.
This patch switches the mips code to use the ON_STACK method
for function calls instead of AT_SYMBOL, which we want to remove.
gdb/ChangeLog:
* mips-tdep.c (mips_push_dummy_code): New function.
(mips_gdbarch_init): Set the gdbarch call_dummy_location to
ON_STACK and install mips_push_dummy_code as our gdbarch
push_dummy_code routine.
Pedro Alves [Wed, 9 May 2012 11:47:14 +0000 (11:47 +0000)]
2012-05-09 Pedro Alves <palves@redhat.com>
* target.c (set_maintenance_target_async_permitted): Rename to ...
(set_target_async_command): ... this.
(show_maintenance_target_async_permitted): Rename to ...
(show_target_async_command): ... this.
(initialize_targets): Adjust.
Doug Evans [Wed, 9 May 2012 05:10:26 +0000 (05:10 +0000)]
* go-exp.y (classify_name): Add missing assignment of fields of
yylval.ssym.
Sean Keys [Wed, 9 May 2012 00:36:46 +0000 (00:36 +0000)]
Added log for a change I made in binutils/MAINTAINERS.
Sean Keys [Wed, 9 May 2012 00:33:37 +0000 (00:33 +0000)]
Added my contact information to the maintainers section.
Alan Modra [Wed, 9 May 2012 00:00:04 +0000 (00:00 +0000)]
daily update
gdbadmin [Wed, 9 May 2012 00:00:03 +0000 (00:00 +0000)]
*** empty log message ***
Eli Zaretskii [Tue, 8 May 2012 18:49:42 +0000 (18:49 +0000)]
Display the ">" prompt in interactive mode while reading canned
commands, even when the current interpreter is MI.
interps.c (interp_set_temp): New function.
interps.h (interp_set_temp): Add prototype.
cli/cli-script.c (restore_interp): New cleanup function.
(read_command_lines): Temporarily override the current interpreter
with CLI and arrange for restoring the original one.