Roman Mashak [Thu, 11 Jul 2019 16:29:00 +0000 (12:29 -0400)]
tc-tests: updated skbedit tests
- Added mask upper bound test case
- Added mask validation test case
- Added mask replacement case
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 12 Jul 2019 22:31:55 +0000 (15:31 -0700)]
Merge branch 'nfp-flower-bugs'
John Hurley says:
====================
Fix bugs in NFP flower match offload
This patchset contains bug fixes for corner cases in the match fields of
flower offloads. The patches ensure that flows that should not be
supported are not (incorrectly) offloaded. These include rules that match
on layer 3 and/or 4 data without specified ethernet or ip protocol fields.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley [Wed, 10 Jul 2019 18:30:30 +0000 (19:30 +0100)]
nfp: flower: ensure ip protocol is specified for L4 matches
Flower rules on the NFP firmware are able to match on an IP protocol
field. When parsing rules in the driver, unknown IP protocols are only
rejected when further matches are to be carried out on layer 4 fields, as
the firmware will not be able to extract such fields from packets.
L4 protocol dissectors such as FLOW_DISSECTOR_KEY_PORTS are only parsed if
an IP protocol is specified. This leaves a loophole whereby a rule that
attempts to match on transport layer information such as port numbers but
does not explicitly give an IP protocol type can be incorrectly offloaded
(in this case with wildcard port numbers matches).
Fix this by rejecting the offload of flows that attempt to match on L4
information, not only when matching on an unknown IP protocol type, but
also when the protocol is wildcarded.
Fixes: 2a04784594f6 ("nfp: flower: check L4 matches on unknown IP protocols")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John Hurley [Wed, 10 Jul 2019 18:30:29 +0000 (19:30 +0100)]
nfp: flower: fix ethernet check on match fields
NFP firmware does not explicitly match on an ethernet type field. Rather,
each rule has a bitmask of match fields that can be used to infer the
ethernet type.
Currently, if a flower rule contains an unknown ethernet type, a check is
carried out for matches on other fields of the packet. If matches on
layer 3 or 4 are found, then the offload is rejected as firmware will not
be able to extract these fields from a packet with an ethernet type it
does not currently understand.
However, if a rule contains an unknown ethernet type without any L3 (or
above) matches then this will effectively be offloaded as a rule with a
wildcarded ethertype. This can lead to misclassifications on the firmware.
Fix this issue by rejecting all flower rules that specify a match on an
unknown ethernet type.
Further ensure correct offloads by moving the 'L3 and above' check to any
rule that does not specify an ethernet type and rejecting rules with
further matches. This means that we can still offload rules with a
wildcarded ethertype if they only match on L2 fields but will prevent
rules which match on further fields that we cannot be sure if the firmware
will be able to extract.
Fixes: af9d842c1354 ("nfp: extend flower add flow offload")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov [Wed, 10 Jul 2019 18:25:54 +0000 (21:25 +0300)]
net/mlx5e: Provide cb_list pointer when setting up tc block on rep
Recent refactoring of tc block offloads infrastructure introduced new
flow_block_cb_setup_simple() method intended to be used as unified way for
all drivers to register offload callbacks. However, commit that actually
extended all users (drivers) with block cb list and provided it to
flow_block infra missed mlx5 en_rep. This leads to following NULL-pointer
dereference when creating Qdisc:
[ 278.385175] BUG: kernel NULL pointer dereference, address:
0000000000000000
[ 278.393233] #PF: supervisor read access in kernel mode
[ 278.399446] #PF: error_code(0x0000) - not-present page
[ 278.405847] PGD
8000000850e73067 P4D
8000000850e73067 PUD
8620cd067 PMD 0
[ 278.414141] Oops: 0000 [#1] SMP PTI
[ 278.419019] CPU: 7 PID: 3369 Comm: tc Not tainted 5.2.0-rc6+ #492
[ 278.426580] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[ 278.435853] RIP: 0010:flow_block_cb_setup_simple+0xc4/0x190
[ 278.442953] Code: 10 48 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 49 89 00 48 05 00 01 00 00 49 89 40 08 31 c0 c3 b8 a1 ff ff ff c3 f3 c3 <48> 8b 06 48 39 c6 75 0a eb 1a 48 8b 00 48 39 c6 74 12
48 3b 50 28
[ 278.464829] RSP: 0018:
ffffaf07c3f97990 EFLAGS:
00010246
[ 278.471648] RAX:
0000000000000000 RBX:
ffff9b43ed4c7680 RCX:
ffff9b43d5f80840
[ 278.480408] RDX:
ffffffffc0491650 RSI:
0000000000000000 RDI:
ffffaf07c3f97998
[ 278.489110] RBP:
ffff9b43ddff9000 R08:
ffff9b43d5f80840 R09:
0000000000000001
[ 278.497838] R10:
0000000000000009 R11:
00000000000003ad R12:
ffffaf07c3f97c08
[ 278.506595] R13:
ffff9b43d5f80000 R14:
ffff9b43ed4c7680 R15:
ffff9b43dfa20b40
[ 278.515374] FS:
00007f796be1b400(0000) GS:
ffff9b43ef840000(0000) knlGS:
0000000000000000
[ 278.525099] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 278.532453] CR2:
0000000000000000 CR3:
0000000840398002 CR4:
00000000001606e0
[ 278.541197] Call Trace:
[ 278.545252] tcf_block_offload_cmd.isra.52+0x7e/0xb0
[ 278.551871] tcf_block_get_ext+0x365/0x3e0
[ 278.557569] qdisc_create+0x15c/0x4e0
[ 278.562859] ? kmem_cache_alloc_trace+0x1a2/0x1c0
[ 278.569235] tc_modify_qdisc+0x1c8/0x780
[ 278.574761] rtnetlink_rcv_msg+0x291/0x340
[ 278.580518] ? _cond_resched+0x15/0x40
[ 278.585856] ? rtnl_calcit.isra.29+0x120/0x120
[ 278.591868] netlink_rcv_skb+0x4a/0x110
[ 278.597198] netlink_unicast+0x1a0/0x250
[ 278.602601] netlink_sendmsg+0x2c1/0x3c0
[ 278.608022] sock_sendmsg+0x5b/0x60
[ 278.612969] ___sys_sendmsg+0x289/0x310
[ 278.618231] ? do_wp_page+0x99/0x730
[ 278.623216] ? page_add_new_anon_rmap+0xbe/0x140
[ 278.629298] ? __handle_mm_fault+0xc84/0x1360
[ 278.635113] ? __sys_sendmsg+0x5e/0xa0
[ 278.640285] __sys_sendmsg+0x5e/0xa0
[ 278.645239] do_syscall_64+0x5b/0x1b0
[ 278.650274] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 278.656697] RIP: 0033:0x7f796abdeb87
[ 278.661628] Code: 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 80 00 00 00 00 8b 05 6a 2b 2c 00 48 63 d2 48 63 ff 85 c0 75 18 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 59 f3 c3 0f 1f 80 00 00 00 00 53
48 89 f3 48
[ 278.683248] RSP: 002b:
00007ffde213ba48 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
[ 278.692245] RAX:
ffffffffffffffda RBX:
000000005d261e6f RCX:
00007f796abdeb87
[ 278.700862] RDX:
0000000000000000 RSI:
00007ffde213bab0 RDI:
0000000000000003
[ 278.709527] RBP:
0000000000000000 R08:
0000000000000001 R09:
0000000000000006
[ 278.718167] R10:
000000000000000c R11:
0000000000000246 R12:
0000000000000001
[ 278.726743] R13:
000000000067b580 R14:
0000000000000000 R15:
0000000000000000
[ 278.735302] Modules linked in: dummy vxlan ip6_udp_tunnel udp_tunnel sch_ingress nfsv3 nfs_acl nfs lockd grace fscache bridge stp llc sunrpc mlx5_ib ib_uverbs intel_rapl ib_core sb_edac x86_pkg_temp_
thermal intel_powerclamp coretemp kvm_intel kvm mlx5_core irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel igb ghash_clmulni_intel ses mei_me enclosure mlxfw ipmi_ssif intel_cstate iTCO_wdt ptp mei
pps_core iTCO_vendor_support pcspkr joydev intel_uncore i2c_i801 ipmi_si lpc_ich intel_rapl_perf ioatdma wmi dca pcc_cpufreq ipmi_devintf ipmi_msghandler acpi_power_meter acpi_pad ast i2c_algo_bit drm_k
ms_helper ttm drm mpt3sas raid_class scsi_transport_sas
[ 278.802263] CR2:
0000000000000000
[ 278.807170] ---[ end trace
b1f0a442a279e66f ]---
Extend en_rep with new static mlx5e_rep_block_cb_list list and pass it to
flow_block_cb_setup_simple() function instead of hardcoded NULL pointer.
Fixes: 955bcb6ea0df ("drivers: net: use flow block API")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Denis Efremov [Wed, 10 Jul 2019 18:03:24 +0000 (21:03 +0300)]
net: phy: make exported variables non-static
The variables phy_basic_ports_array, phy_fibre_port_array and
phy_all_ports_features_array are declared static and marked
EXPORT_SYMBOL_GPL(), which is at best an odd combination.
Because the variables were decided to be a part of API, this commit
removes the static attributes and adds the declarations to the header.
Fixes: 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode")
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov [Wed, 10 Jul 2019 17:12:29 +0000 (20:12 +0300)]
net: sched: Fix NULL-pointer dereference in tc_indr_block_ing_cmd()
After recent refactoring of block offlads infrastructure, indr_dev->block
pointer is dereferenced before it is verified to be non-NULL. Example stack
trace where this behavior leads to NULL-pointer dereference error when
creating vxlan dev on system with mlx5 NIC with offloads enabled:
[ 1157.852938] ==================================================================
[ 1157.866877] BUG: KASAN: null-ptr-deref in tc_indr_block_ing_cmd.isra.41+0x9c/0x160
[ 1157.880877] Read of size 4 at addr
0000000000000090 by task ip/3829
[ 1157.901637] CPU: 22 PID: 3829 Comm: ip Not tainted 5.2.0-rc6+ #488
[ 1157.914438] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[ 1157.929031] Call Trace:
[ 1157.938318] dump_stack+0x9a/0xeb
[ 1157.948362] ? tc_indr_block_ing_cmd.isra.41+0x9c/0x160
[ 1157.960262] ? tc_indr_block_ing_cmd.isra.41+0x9c/0x160
[ 1157.972082] __kasan_report+0x176/0x192
[ 1157.982513] ? tc_indr_block_ing_cmd.isra.41+0x9c/0x160
[ 1157.994348] kasan_report+0xe/0x20
[ 1158.004324] tc_indr_block_ing_cmd.isra.41+0x9c/0x160
[ 1158.015950] ? tcf_block_setup+0x430/0x430
[ 1158.026558] ? kasan_unpoison_shadow+0x30/0x40
[ 1158.037464] __tc_indr_block_cb_register+0x5f5/0xf20
[ 1158.049288] ? mlx5e_rep_indr_tc_block_unbind+0xa0/0xa0 [mlx5_core]
[ 1158.062344] ? tc_indr_block_dev_put.part.47+0x5c0/0x5c0
[ 1158.074498] ? rdma_roce_rescan_device+0x20/0x20 [ib_core]
[ 1158.086580] ? br_device_event+0x98/0x480 [bridge]
[ 1158.097870] ? strcmp+0x30/0x50
[ 1158.107578] mlx5e_nic_rep_netdevice_event+0xdd/0x180 [mlx5_core]
[ 1158.120212] notifier_call_chain+0x6d/0xa0
[ 1158.130753] register_netdevice+0x6fc/0x7e0
[ 1158.141322] ? netdev_change_features+0xa0/0xa0
[ 1158.152218] ? vxlan_config_apply+0x210/0x310 [vxlan]
[ 1158.163593] __vxlan_dev_create+0x2ad/0x520 [vxlan]
[ 1158.174770] ? vxlan_changelink+0x490/0x490 [vxlan]
[ 1158.185870] ? rcu_read_unlock+0x60/0x60 [vxlan]
[ 1158.196798] vxlan_newlink+0x99/0xf0 [vxlan]
[ 1158.207303] ? __vxlan_dev_create+0x520/0x520 [vxlan]
[ 1158.218601] ? rtnl_create_link+0x3d0/0x450
[ 1158.228900] __rtnl_newlink+0x8a7/0xb00
[ 1158.238701] ? stack_access_ok+0x35/0x80
[ 1158.248450] ? rtnl_link_unregister+0x1a0/0x1a0
[ 1158.258735] ? find_held_lock+0x6d/0xd0
[ 1158.268379] ? is_bpf_text_address+0x67/0xf0
[ 1158.278330] ? lock_acquire+0xc1/0x1f0
[ 1158.287686] ? is_bpf_text_address+0x5/0xf0
[ 1158.297449] ? is_bpf_text_address+0x86/0xf0
[ 1158.307310] ? kernel_text_address+0xec/0x100
[ 1158.317155] ? arch_stack_walk+0x92/0xe0
[ 1158.326497] ? __kernel_text_address+0xe/0x30
[ 1158.336213] ? unwind_get_return_address+0x2f/0x50
[ 1158.346267] ? create_prof_cpu_mask+0x20/0x20
[ 1158.355936] ? arch_stack_walk+0x92/0xe0
[ 1158.365117] ? stack_trace_save+0x8a/0xb0
[ 1158.374272] ? stack_trace_consume_entry+0x80/0x80
[ 1158.384226] ? match_held_lock+0x33/0x210
[ 1158.393216] ? kasan_unpoison_shadow+0x30/0x40
[ 1158.402593] rtnl_newlink+0x53/0x80
[ 1158.410925] rtnetlink_rcv_msg+0x3a5/0x600
[ 1158.419777] ? validate_linkmsg+0x400/0x400
[ 1158.428620] ? find_held_lock+0x6d/0xd0
[ 1158.437117] ? match_held_lock+0x1b/0x210
[ 1158.445760] ? validate_linkmsg+0x400/0x400
[ 1158.454642] netlink_rcv_skb+0xc7/0x1f0
[ 1158.463150] ? netlink_ack+0x470/0x470
[ 1158.471538] ? netlink_deliver_tap+0x1f3/0x5a0
[ 1158.480607] netlink_unicast+0x2ae/0x350
[ 1158.489099] ? netlink_attachskb+0x340/0x340
[ 1158.497935] ? _copy_from_iter_full+0xde/0x3b0
[ 1158.506945] ? __virt_addr_valid+0xb6/0xf0
[ 1158.515578] ? __check_object_size+0x159/0x240
[ 1158.524515] netlink_sendmsg+0x4d3/0x630
[ 1158.532879] ? netlink_unicast+0x350/0x350
[ 1158.541400] ? netlink_unicast+0x350/0x350
[ 1158.549805] sock_sendmsg+0x94/0xa0
[ 1158.557561] ___sys_sendmsg+0x49d/0x570
[ 1158.565625] ? copy_msghdr_from_user+0x210/0x210
[ 1158.574457] ? __fput+0x1e2/0x330
[ 1158.581948] ? __kasan_slab_free+0x130/0x180
[ 1158.590407] ? kmem_cache_free+0xb6/0x2d0
[ 1158.598574] ? mark_lock+0xc7/0x790
[ 1158.606177] ? task_work_run+0xcf/0x100
[ 1158.614165] ? exit_to_usermode_loop+0x102/0x110
[ 1158.622954] ? __lock_acquire+0x963/0x1ee0
[ 1158.631199] ? lockdep_hardirqs_on+0x260/0x260
[ 1158.639777] ? match_held_lock+0x1b/0x210
[ 1158.647918] ? lockdep_hardirqs_on+0x260/0x260
[ 1158.656501] ? match_held_lock+0x1b/0x210
[ 1158.664643] ? __fget_light+0xa6/0xe0
[ 1158.672423] ? __sys_sendmsg+0xd2/0x150
[ 1158.680334] __sys_sendmsg+0xd2/0x150
[ 1158.688063] ? __ia32_sys_shutdown+0x30/0x30
[ 1158.696435] ? lock_downgrade+0x2e0/0x2e0
[ 1158.704541] ? mark_held_locks+0x1a/0x90
[ 1158.712611] ? mark_held_locks+0x1a/0x90
[ 1158.720619] ? do_syscall_64+0x1e/0x2c0
[ 1158.728530] do_syscall_64+0x78/0x2c0
[ 1158.736254] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1158.745414] RIP: 0033:0x7f62d505cb87
[ 1158.753070] Code: 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 80 00 00 00 00 8b 05 6a 2b 2c 00 48 63 d2 48 63 ff 85 c0 75 18 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 59 f3 c3 0f 1f 80 00 00[87/1817]
48 89 f3 48
[ 1158.780924] RSP: 002b:
00007fffd9832268 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
[ 1158.793204] RAX:
ffffffffffffffda RBX:
000000005d26048f RCX:
00007f62d505cb87
[ 1158.805111] RDX:
0000000000000000 RSI:
00007fffd98322d0 RDI:
0000000000000003
[ 1158.817055] RBP:
0000000000000000 R08:
0000000000000001 R09:
0000000000000006
[ 1158.828987] R10:
00007f62d50ce260 R11:
0000000000000246 R12:
0000000000000001
[ 1158.840909] R13:
000000000067e540 R14:
0000000000000000 R15:
000000000067ed20
[ 1158.852873] ==================================================================
Introduce new function tcf_block_non_null_shared() that verifies block
pointer before dereferencing it to obtain index. Use the function in
tc_indr_block_ing_cmd() to prevent NULL pointer dereference.
Fixes: 955bcb6ea0df ("drivers: net: use flow block API")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Wed, 10 Jul 2019 08:00:33 +0000 (10:00 +0200)]
davinci_cpdma: don't cast dma_addr_t to pointer
dma_addr_t may be 64-bit wide on 32-bit architectures, so it is not
valid to cast between it and a pointer:
drivers/net/ethernet/ti/davinci_cpdma.c: In function 'cpdma_chan_submit_si':
drivers/net/ethernet/ti/davinci_cpdma.c:1047:12: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
drivers/net/ethernet/ti/davinci_cpdma.c: In function 'cpdma_chan_idle_submit_mapped':
drivers/net/ethernet/ti/davinci_cpdma.c:1114:12: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
drivers/net/ethernet/ti/davinci_cpdma.c: In function 'cpdma_chan_submit_mapped':
drivers/net/ethernet/ti/davinci_cpdma.c:1164:12: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
Solve this by using two separate members in 'struct submit_info'.
Since this avoids the use of the 'flag' member, the structure does
not even grow in typical configurations.
Fixes: 6670acacd59e ("net: ethernet: ti: davinci_cpdma: add dma mapped submit")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Taehee Yoo [Fri, 5 Jul 2019 16:08:09 +0000 (01:08 +0900)]
net: openvswitch: do not update max_headroom if new headroom is equal to old headroom
When a vport is deleted, the maximum headroom size would be changed.
If the vport which has the largest headroom is deleted,
the new max_headroom would be set.
But, if the new headroom size is equal to the old headroom size,
updating routine is unnecessary.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Tested-by: Greg Rose <gvrose8192@gmail.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nathan Chancellor [Wed, 10 Jul 2019 06:06:15 +0000 (23:06 -0700)]
net/mlx5e: Convert single case statement switch statements into if statements
During the review of commit
1ff2f0fa450e ("net/mlx5e: Return in default
case statement in tx_post_resync_params"), Leon and Nick pointed out
that the switch statements can be converted to single if statements
that return early so that the code is easier to follow.
Suggested-by: Leon Romanovsky <leon@kernel.org>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 11 Jul 2019 22:27:20 +0000 (15:27 -0700)]
Merge branch 'net/rds-fixes' of git://git./linux/kernel/git/ssantosh/linux
Santosh Shilimkar says:
====================
rds fixes
Few rds fixes which makes rds rdma transport reliably working on mainline
First two fixes are applicable to v4.11+ stable versions and last
three patches applies to only v5.1 stable and current mainline.
Patchset is re-based against 'net' and also available on below tree
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 11 Jul 2019 22:06:37 +0000 (15:06 -0700)]
Merge tag 'mlx5-fixes-2019-07-11' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2019-07-11
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
For -stable v4.15
('net/mlx5e: IPoIB, Add error path in mlx5_rdma_setup_rn')
For -stable v5.1
('net/mlx5e: Fix port tunnel GRE entropy control')
('net/mlx5e: Rx, Fix checksum calculation for new hardware')
('net/mlx5e: Fix return value from timeout recover function')
('net/mlx5e: Fix error flow in tx reporter diagnose')
For -stable v5.2
('net/mlx5: E-Switch, Fix default encap mode')
Conflict note: This pull request will produce a small conflict when
merged with net-next.
In drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
Take the hunk from net and replace:
esw_offloads_steering_init(esw, vf_nvports, total_nvports);
with:
esw_offloads_steering_init(esw);
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 11 Jul 2019 22:04:39 +0000 (15:04 -0700)]
Merge branch 'mlx5-build-fixes'
Saeed Mahameed says:
====================
Mellanox, mlx5 build fixes
I know net-next is closed but these patches are fixing some compiler
build and warnings issues people have been complaining about.
I hope it is not too late, but in case it is a lot of trouble for you,
I guess they can wait.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed [Thu, 11 Jul 2019 19:39:59 +0000 (19:39 +0000)]
net/mlx5: E-Switch, Reduce ingress acl modify metadata stack usage
Fix the following compiler warning:
In function ‘esw_vport_add_ingress_acl_modify_metadata’:
the frame size of 1084 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Since the structure is never written to, we can statically allocate
it to avoid the stack usage.
Fixes: 7445cfb1169c ("net/mlx5: E-Switch, Tag packet with vport number in VF vports and uplink ingress ACLs")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed [Thu, 11 Jul 2019 19:39:57 +0000 (19:39 +0000)]
net/mlx5e: Fix unused variable warning when CONFIG_MLX5_ESWITCH is off
In mlx5e_setup_tc "priv" variable is not being used if
CONFIG_MLX5_ESWITCH is off, one way to fix this is to actually use it.
mlx5e_setup_tc_mqprio also needs the "priv" variable and it extracts it
on its own. We can simply pass priv to mlx5e_setup_tc_mqprio instead of
netdev and avoid extracting the priv var, which will also resolve the
compiler warning.
Fixes: 4e95bc268b91 ("net: flow_offload: add flow_block_cb_setup_simple()")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
CC: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan [Thu, 11 Jul 2019 19:39:55 +0000 (19:39 +0000)]
net/mlx5e: Fix compilation error in TLS code
In the cited patch below, the Kconfig flags combination of:
CONFIG_MLX5_FPGA is not set
CONFIG_MLX5_TLS=y
CONFIG_MLX5_EN_TLS=y
leads to the compilation error:
./include/linux/mlx5/device.h:61:39: error: invalid application of
sizeof to incomplete type struct mlx5_ifc_tls_flow_bits.
Fix it.
Fixes: 90687e1a9a50 ("net/mlx5: Kconfig, Better organize compilation flags")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
CC: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 10 Jul 2019 13:40:11 +0000 (06:40 -0700)]
ipv6: fix static key imbalance in fl_create()
fl_create() should call static_branch_deferred_inc() only in
case of success.
Also we should not call fl_free() in error path, as this could
cause a static key imbalance.
jump label: negative count!
WARNING: CPU: 0 PID: 15907 at kernel/jump_label.c:221 static_key_slow_try_dec kernel/jump_label.c:221 [inline]
WARNING: CPU: 0 PID: 15907 at kernel/jump_label.c:221 static_key_slow_try_dec+0x1ab/0x1d0 kernel/jump_label.c:206
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 15907 Comm: syz-executor.2 Not tainted 5.2.0-rc6+ #62
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
panic+0x2cb/0x744 kernel/panic.c:219
__warn.cold+0x20/0x4d kernel/panic.c:576
report_bug+0x263/0x2b0 lib/bug.c:186
fixup_bug arch/x86/kernel/traps.c:179 [inline]
fixup_bug arch/x86/kernel/traps.c:174 [inline]
do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:272
do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:291
invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:986
RIP: 0010:static_key_slow_try_dec kernel/jump_label.c:221 [inline]
RIP: 0010:static_key_slow_try_dec+0x1ab/0x1d0 kernel/jump_label.c:206
Code: c0 e8 e9 3e e5 ff 83 fb 01 0f 85 32 ff ff ff e8 5b 3d e5 ff 45 31 ff eb a0 e8 51 3d e5 ff 48 c7 c7 40 99 92 87 e8 13 75 b7 ff <0f> 0b eb 8b 4c 89 e7 e8 a9 c0 1e 00 e9 de fe ff ff e8 bf 6d b7 ff
RSP: 0018:
ffff88805f9c7450 EFLAGS:
00010286
RAX:
0000000000000000 RBX:
00000000ffffffff RCX:
0000000000000000
RDX:
000000000000e3e1 RSI:
ffffffff815adb06 RDI:
ffffed100bf38e7c
RBP:
ffff88805f9c74e0 R08:
ffff88806acf0700 R09:
ffffed1015d060a9
R10:
ffffed1015d060a8 R11:
ffff8880ae830547 R12:
ffffffff89832ce0
R13:
ffff88805f9c74b8 R14:
1ffff1100bf38e8b R15:
00000000ffffff01
__static_key_slow_dec_deferred+0x65/0x110 kernel/jump_label.c:272
fl_free+0xa9/0xe0 net/ipv6/ip6_flowlabel.c:121
fl_create+0x6af/0x9f0 net/ipv6/ip6_flowlabel.c:457
ipv6_flowlabel_opt+0x80e/0x2730 net/ipv6/ip6_flowlabel.c:624
do_ipv6_setsockopt.isra.0+0x2119/0x4100 net/ipv6/ipv6_sockglue.c:825
ipv6_setsockopt+0xf6/0x170 net/ipv6/ipv6_sockglue.c:944
tcp_setsockopt net/ipv4/tcp.c:3131 [inline]
tcp_setsockopt+0x8f/0xe0 net/ipv4/tcp.c:3125
sock_common_setsockopt+0x94/0xd0 net/core/sock.c:3130
__sys_setsockopt+0x253/0x4b0 net/socket.c:2080
__do_sys_setsockopt net/socket.c:2096 [inline]
__se_sys_setsockopt net/socket.c:2093 [inline]
__x64_sys_setsockopt+0xbe/0x150 net/socket.c:2093
do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4597c9
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007f2670556c78 EFLAGS:
00000246 ORIG_RAX:
0000000000000036
RAX:
ffffffffffffffda RBX:
0000000000000005 RCX:
00000000004597c9
RDX:
0000000000000020 RSI:
0000000000000029 RDI:
0000000000000003
RBP:
000000000075bfc8 R08:
000000000000fdf7 R09:
0000000000000000
R10:
0000000020000000 R11:
0000000000000246 R12:
00007f26705576d4
R13:
00000000004cec00 R14:
00000000004dd520 R15:
00000000ffffffff
Kernel Offset: disabled
Rebooting in 86400 seconds..
Fixes: 59c820b2317f ("ipv6: elide flowlabel check if no exclusive leases exist")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 10 Jul 2019 13:40:10 +0000 (06:40 -0700)]
ipv6: fix potential crash in ip6_datagram_dst_update()
Willem forgot to change one of the calls to fl6_sock_lookup(),
which can now return an error or NULL.
syzbot reported :
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 31763 Comm: syz-executor.0 Not tainted 5.2.0-rc6+ #63
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:ip6_datagram_dst_update+0x559/0xc30 net/ipv6/datagram.c:83
Code: 00 00 e8 ea 29 3f fb 4d 85 f6 0f 84 96 04 00 00 e8 dc 29 3f fb 49 8d 7e 20 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 16 06 00 00 4d 8b 6e 20 e8 b4 29 3f fb 4c 89 ee
RSP: 0018:
ffff88809ba97ae0 EFLAGS:
00010207
RAX:
dffffc0000000000 RBX:
ffff8880a81254b0 RCX:
ffffc90008118000
RDX:
0000000000000003 RSI:
ffffffff86319a84 RDI:
000000000000001e
RBP:
ffff88809ba97c10 R08:
ffff888065e9e700 R09:
ffffed1015d26c80
R10:
ffffed1015d26c7f R11:
ffff8880ae9363fb R12:
ffff8880a8124f40
R13:
0000000000000001 R14:
fffffffffffffffe R15:
ffff88809ba97b40
FS:
00007f38e606a700(0000) GS:
ffff8880ae900000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00000000202c0140 CR3:
00000000a026a000 CR4:
00000000001406e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
__ip6_datagram_connect+0x5e9/0x1390 net/ipv6/datagram.c:246
ip6_datagram_connect+0x30/0x50 net/ipv6/datagram.c:269
ip6_datagram_connect_v6_only+0x69/0x90 net/ipv6/datagram.c:281
inet_dgram_connect+0x14a/0x2d0 net/ipv4/af_inet.c:571
__sys_connect+0x264/0x330 net/socket.c:1824
__do_sys_connect net/socket.c:1835 [inline]
__se_sys_connect net/socket.c:1832 [inline]
__x64_sys_connect+0x73/0xb0 net/socket.c:1832
do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4597c9
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007f38e6069c78 EFLAGS:
00000246 ORIG_RAX:
000000000000002a
RAX:
ffffffffffffffda RBX:
0000000000000003 RCX:
00000000004597c9
RDX:
000000000000001c RSI:
0000000020000040 RDI:
0000000000000003
RBP:
000000000075bf20 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007f38e606a6d4
R13:
00000000004bfd07 R14:
00000000004d1838 R15:
00000000ffffffff
Modules linked in:
RIP: 0010:ip6_datagram_dst_update+0x559/0xc30 net/ipv6/datagram.c:83
Code: 00 00 e8 ea 29 3f fb 4d 85 f6 0f 84 96 04 00 00 e8 dc 29 3f fb 49 8d 7e 20 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 16 06 00 00 4d 8b 6e 20 e8 b4 29 3f fb 4c 89 ee
Fixes: 59c820b2317f ("ipv6: elide flowlabel check if no exclusive leases exist")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 10 Jul 2019 13:40:09 +0000 (06:40 -0700)]
ipv6: tcp: fix flowlabels reflection for RST packets
In
323a53c41292 ("ipv6: tcp: enable flowlabel reflection in some RST packets")
and
50a8accf1062 ("ipv6: tcp: send consistent flowlabel in TIME_WAIT state")
we took care of IPv6 flowlabel reflections for two cases.
This patch takes care of the remaining case, when the RST packet
is sent on behalf of a 'full' socket.
In Marek use case, this was a socket in TCP_CLOSE state.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Marek Majkowski <marek@cloudflare.com>
Tested-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
yangxingwu [Wed, 10 Jul 2019 13:14:10 +0000 (21:14 +0800)]
ipv6: Use ipv6_authlen for len
The length of AH header is computed manually as (hp->hdrlen+2)<<2.
However, in include/linux/ipv6.h, a macro named ipv6_authlen is
already defined for exactly the same job. This commit replaces
the manual computation code with the macro.
Signed-off-by: yangxingwu <xingwu.yang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Wed, 10 Jul 2019 06:24:54 +0000 (23:24 -0700)]
hsr: switch ->dellink() to ->ndo_uninit()
Switching from ->priv_destructor to dellink() has an unexpected
consequence: existing RCU readers, that is, hsr_port_get_hsr()
callers, may still be able to read the port list.
Instead of checking the return value of each hsr_port_get_hsr(),
we can just move it to ->ndo_uninit() which is called after
device unregister and synchronize_net(), and we still have RTNL
lock there.
Fixes: b9a1e627405d ("hsr: implement dellink to clean up resources")
Fixes: edf070a0fb45 ("hsr: fix a NULL pointer deref in hsr_dev_xmit()")
Reported-by: syzbot+097ef84cdc95843fbaa8@syzkaller.appspotmail.com
Cc: Arvid Brodin <arvid.brodin@alten.se>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Wed, 10 Jul 2019 05:04:21 +0000 (22:04 -0700)]
net: stmmac: Fix misuses of GENMASK macro
Arguments are supposed to be ordered high then low.
Fixes: 293e4365a1ad ("stmmac: change descriptor layout")
Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i")
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Joe Perches [Wed, 10 Jul 2019 05:04:20 +0000 (22:04 -0700)]
net: ethernet: mediatek: Fix misuses of GENMASK macro
Arguments are supposed to be ordered high then low.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petar Penkov [Fri, 5 Jul 2019 18:46:43 +0000 (11:46 -0700)]
net: fib_rules: do not flow dissect local packets
Rules matching on loopback iif do not need early flow dissection as the
packet originates from the host. Stop counting such rules in
fib_rule_requires_fldissect
Signed-off-by: Petar Penkov <ppenkov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aya Levin [Sun, 7 Jul 2019 13:57:06 +0000 (16:57 +0300)]
net/mlx5e: IPoIB, Add error path in mlx5_rdma_setup_rn
Check return value from mlx5e_attach_netdev, add error path on failure.
Fixes: 48935bbb7ae8 ("net/mlx5e: IPoIB, Add netdevice profile skeleton")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Aya Levin [Sun, 30 Jun 2019 08:11:26 +0000 (11:11 +0300)]
net/mlx5e: Fix error flow in tx reporter diagnose
Fix tx reporter's diagnose callback. Propagate error when failing to
gather diagnostics information or failing to print diagnostic data per
queue.
Fixes: de8650a82071 ("net/mlx5e: Add tx reporter support")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Aya Levin [Mon, 17 Jun 2019 09:01:45 +0000 (12:01 +0300)]
net/mlx5e: Fix return value from timeout recover function
Fix timeout recover function to return a meaningful return value.
When an interrupt was not sent by the FW, return IO error instead of
'true'.
Fixes: c7981bea48fb ("net/mlx5e: Fix return status of TX reporter timeout recover")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Saeed Mahameed [Fri, 3 May 2019 20:14:59 +0000 (13:14 -0700)]
net/mlx5e: Rx, Fix checksum calculation for new hardware
CQE checksum full mode in new HW, provides a full checksum of rx frame.
Covering bytes starting from eth protocol up to last byte in the received
frame (frame_size - ETH_HLEN), as expected by the stack.
Fixing up skb->csum by the driver is not required in such case. This fix
is to avoid wrong checksum calculation in drivers which already support
the new hardware with the new checksum mode.
Fixes: 85327a9c4150 ("net/mlx5: Update the list of the PCI supported devices")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Eli Britstein [Sun, 2 Jun 2019 06:19:03 +0000 (06:19 +0000)]
net/mlx5e: Fix port tunnel GRE entropy control
GRE entropy calculation is a single bit per card, and not per port.
Force disable GRE entropy calculation upon the first GRE encap rule,
and release the force at the last GRE encap rule removal. This is done
per port.
Fixes: 97417f6182f8 ("net/mlx5e: Fix GRE key by controlling port tunnel entropy calculation")
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Maor Gottlieb [Mon, 17 Jun 2019 10:22:28 +0000 (13:22 +0300)]
net/mlx5: E-Switch, Fix default encap mode
Encap mode is related to switchdev mode only. Move the init of
the encap mode to eswitch_offloads. Before this change, we reported
that eswitch supports encap, even tough the device was in non
SRIOV mode.
Fixes: 7768d1971de67 ('net/mlx5: E-Switch, Add control for encapsulation')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Linus Torvalds [Thu, 11 Jul 2019 18:17:09 +0000 (11:17 -0700)]
Merge tag 'acpi-5.3-rc1-2' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert a recent ACPICA commit causing systems to hang at boot time"
* tag 'acpi-5.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPICA: Update table load object initialization"
Linus Torvalds [Thu, 11 Jul 2019 17:55:49 +0000 (10:55 -0700)]
Merge git://git./linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
"Some highlights from this development cycle:
1) Big refactoring of ipv6 route and neigh handling to support
nexthop objects configurable as units from userspace. From David
Ahern.
2) Convert explored_states in BPF verifier into a hash table,
significantly decreased state held for programs with bpf2bpf
calls, from Alexei Starovoitov.
3) Implement bpf_send_signal() helper, from Yonghong Song.
4) Various classifier enhancements to mvpp2 driver, from Maxime
Chevallier.
5) Add aRFS support to hns3 driver, from Jian Shen.
6) Fix use after free in inet frags by allocating fqdirs dynamically
and reworking how rhashtable dismantle occurs, from Eric Dumazet.
7) Add act_ctinfo packet classifier action, from Kevin
Darbyshire-Bryant.
8) Add TFO key backup infrastructure, from Jason Baron.
9) Remove several old and unused ISDN drivers, from Arnd Bergmann.
10) Add devlink notifications for flash update status to mlxsw driver,
from Jiri Pirko.
11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.
12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.
13) Various enhancements to ipv6 flow label handling, from Eric
Dumazet and Willem de Bruijn.
14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
der Merwe, and others.
15) Various improvements to axienet driver including converting it to
phylink, from Robert Hancock.
16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.
17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
Radulescu.
18) Add devlink health reporting to mlx5, from Moshe Shemesh.
19) Convert stmmac over to phylink, from Jose Abreu.
20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
Shalom Toledo.
21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.
22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.
23) Track spill/fill of constants in BPF verifier, from Alexei
Starovoitov.
24) Support bounded loops in BPF, from Alexei Starovoitov.
25) Various page_pool API fixes and improvements, from Jesper Dangaard
Brouer.
26) Just like ipv4, support ref-countless ipv6 route handling. From
Wei Wang.
27) Support VLAN offloading in aquantia driver, from Igor Russkikh.
28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.
29) Add flower GRE encap/decap support to nfp driver, from Pieter
Jansen van Vuuren.
30) Protect against stack overflow when using act_mirred, from John
Hurley.
31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.
32) Use page_pool API in netsec driver, Ilias Apalodimas.
33) Add Google gve network driver, from Catherine Sullivan.
34) More indirect call avoidance, from Paolo Abeni.
35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.
36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.
37) Add MPLS manipulation actions to TC, from John Hurley.
38) Add sending a packet to connection tracking from TC actions, and
then allow flower classifier matching on conntrack state. From
Paul Blakey.
39) Netfilter hw offload support, from Pablo Neira Ayuso"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
net/mlx5e: Return in default case statement in tx_post_resync_params
mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
net: dsa: add support for BRIDGE_MROUTER attribute
pkt_sched: Include const.h
net: netsec: remove static declaration for netsec_set_tx_de()
net: netsec: remove superfluous if statement
netfilter: nf_tables: add hardware offload support
net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
net: flow_offload: add flow_block_cb_is_busy() and use it
net: sched: remove tcf block API
drivers: net: use flow block API
net: sched: use flow block API
net: flow_offload: add flow_block_cb_{priv, incref, decref}()
net: flow_offload: add list handling functions
net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
net: flow_offload: add flow_block_cb_setup_simple()
net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
...
Linus Torvalds [Thu, 11 Jul 2019 17:09:44 +0000 (10:09 -0700)]
Merge tag 'clone3-v5.3' of git://git./linux/kernel/git/brauner/linux
Pull clone3 system call from Christian Brauner:
"This adds the clone3 syscall which is an extensible successor to clone
after we snagged the last flag with CLONE_PIDFD during the 5.2 merge
window for clone(). It cleanly supports all of the flags from clone()
and thus all legacy workloads.
There are few user visible differences between clone3 and clone.
First, CLONE_DETACHED will cause EINVAL with clone3 so we can reuse
this flag. Second, the CSIGNAL flag is deprecated and will cause
EINVAL to be reported. It is superseeded by a dedicated "exit_signal"
argument in struct clone_args thus freeing up even more flags. And
third, clone3 gives CLONE_PIDFD a dedicated return argument in struct
clone_args instead of abusing CLONE_PARENT_SETTID's parent_tidptr
argument.
The clone3 uapi is designed to be easy to handle on 32- and 64 bit:
/* uapi */
struct clone_args {
__aligned_u64 flags;
__aligned_u64 pidfd;
__aligned_u64 child_tid;
__aligned_u64 parent_tid;
__aligned_u64 exit_signal;
__aligned_u64 stack;
__aligned_u64 stack_size;
__aligned_u64 tls;
};
and a separate kernel struct is used that uses proper kernel typing:
/* kernel internal */
struct kernel_clone_args {
u64 flags;
int __user *pidfd;
int __user *child_tid;
int __user *parent_tid;
int exit_signal;
unsigned long stack;
unsigned long stack_size;
unsigned long tls;
};
The system call comes with a size argument which enables the kernel to
detect what version of clone_args userspace is passing in. clone3
validates that any additional bytes a given kernel does not know about
are set to zero and that the size never exceeds a page.
A nice feature is that this patchset allowed us to cleanup and
simplify various core kernel codepaths in kernel/fork.c by making the
internal _do_fork() function take struct kernel_clone_args even for
legacy clone().
This patch also unblocks the time namespace patchset which wants to
introduce a new CLONE_TIMENS flag.
Note, that clone3 has only been wired up for x86{_32,64}, arm{64}, and
xtensa. These were the architectures that did not require special
massaging.
Other architectures treat fork-like system calls individually and
after some back and forth neither Arnd nor I felt confident that we
dared to add clone3 unconditionally to all architectures. We agreed to
leave this up to individual architecture maintainers. This is why
there's an additional patch that introduces __ARCH_WANT_SYS_CLONE3
which any architecture can set once it has implemented support for
clone3. The patch also adds a cond_syscall(clone3) for architectures
such as nios2 or h8300 that generate their syscall table by simply
including asm-generic/unistd.h. The hope is to get rid of
__ARCH_WANT_SYS_CLONE3 and cond_syscall() rather soon"
* tag 'clone3-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
arch: handle arches who do not yet define clone3
arch: wire-up clone3() syscall
fork: add clone3
Linus Torvalds [Thu, 11 Jul 2019 05:17:21 +0000 (22:17 -0700)]
Merge tag 'pidfd-updates-v5.3' of git://git./linux/kernel/git/brauner/linux
Pull pidfd updates from Christian Brauner:
"This adds two main features.
- First, it adds polling support for pidfds. This allows process
managers to know when a (non-parent) process dies in a race-free
way.
The notification mechanism used follows the same logic that is
currently used when the parent of a task is notified of a child's
death. With this patchset it is possible to put pidfds in an
{e}poll loop and get reliable notifications for process (i.e.
thread-group) exit.
- The second feature compliments the first one by making it possible
to retrieve pollable pidfds for processes that were not created
using CLONE_PIDFD.
A lot of processes get created with traditional PID-based calls
such as fork() or clone() (without CLONE_PIDFD). For these
processes a caller can currently not create a pollable pidfd. This
is a problem for Android's low memory killer (LMK) and service
managers such as systemd.
Both patchsets are accompanied by selftests.
It's perhaps worth noting that the work done so far and the work done
in this branch for pidfd_open() and polling support do already see
some adoption:
- Android is in the process of backporting this work to all their LTS
kernels [1]
- Service managers make use of pidfd_send_signal but will need to
wait until we enable waiting on pidfds for full adoption.
- And projects I maintain make use of both pidfd_send_signal and
CLONE_PIDFD [2] and will use polling support and pidfd_open() too"
[1] https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.9+backport%22
https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.14+backport%22
https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.19+backport%22
[2] https://github.com/lxc/lxc/blob/
aab6e3eb73c343231cdde775db938994fc6f2803/src/lxc/start.c#L1753
* tag 'pidfd-updates-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
tests: add pidfd_open() tests
arch: wire-up pidfd_open()
pid: add pidfd_open()
pidfd: add polling selftests
pidfd: add polling support
Linus Torvalds [Thu, 11 Jul 2019 04:44:07 +0000 (21:44 -0700)]
Merge tag 'm68k-for-v5.3-tag2' of git://git./linux/kernel/git/geert/linux-m68k
Pull m68k fix from Geert Uytterhoeven:
"Don't select ARCH_HAS_DMA_PREP_COHERENT for nommu or coldfire.
This is a fix for an issue detected in next, to avoid introducing
build failures when merging Christoph's dma-mapping tree later"
* tag 'm68k-for-v5.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Don't select ARCH_HAS_DMA_PREP_COHERENT for nommu or coldfire
Linus Torvalds [Thu, 11 Jul 2019 04:42:03 +0000 (21:42 -0700)]
Merge branch 'for-next' of git://git./linux/kernel/git/gerg/m68knommu
Pull m68nommu updates from Greg Ungerer:
"A series of cleanups for the FLAT format binary loader, binfmt_flat,
from Christoph.
The end goal is to support no-MMU on RISC-V, and the last patch
enables that"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
riscv: add binfmt_flat support
binfmt_flat: don't offset the data start
binfmt_flat: move the MAX_SHARED_LIBS definition to binfmt_flat.c
binfmt_flat: remove the persistent argument from flat_get_addr_from_rp
binfmt_flat: provide an asm-generic/flat.h
binfmt_flat: make support for old format binaries optional
binfmt_flat: add a ARCH_HAS_BINFMT_FLAT option
binfmt_flat: add endianess annotations
binfmt_flat: use fixed size type for the on-disk format
binfmt_flat: consolidate two version of flat_v2_reloc_t
binfmt_flat: remove the unused OLD_FLAT_FLAG_RAM definition
binfmt_flat: remove the uapi <linux/flat.h> header
binfmt_flat: replace flat_argvp_envp_on_stack with a Kconfig variable
binfmt_flat: remove flat_old_ram_flag
binfmt_flat: provide a default version of flat_get_relocate_addr
binfmt_flat: remove flat_set_persistent
binfmt_flat: remove flat_reloc_valid
Linus Torvalds [Thu, 11 Jul 2019 04:22:43 +0000 (21:22 -0700)]
Merge tag 'nfsd-5.3' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Highlights:
- Add a new /proc/fs/nfsd/clients/ directory which exposes some
long-requested information about NFSv4 clients (like open files)
and allows forced revocation of client state.
- Replace the global duplicate reply cache by a cache per network
namespace; previously, a request in one network namespace could
incorrectly match an entry from another, though we haven't seen
this in production. This is the last remaining container bug that
I'm aware of; at this point you should be able to run separate
nfsd's in each network namespace, each with their own set of
exports, and everything should work.
- Cleanup and modify lock code to show the pid of lockd as the owner
of NLM locks. This is the correct version of the bugfix originally
attempted in
b8eee0e90f97 ("lockd: Show pid of lockd for remote
locks")"
* tag 'nfsd-5.3' of git://linux-nfs.org/~bfields/linux: (34 commits)
nfsd: Make __get_nfsdfs_client() static
nfsd: Make two functions static
nfsd: Fix misuse of strlcpy
sunrpc/cache: remove the exporting of cache_seq_next
nfsd: decode implementation id
nfsd: create xdr_netobj_dup helper
nfsd: allow forced expiration of NFSv4 clients
nfsd: create get_nfsdfs_clp helper
nfsd4: show layout stateids
nfsd: show lock and deleg stateids
nfsd4: add file to display list of client's opens
nfsd: add more information to client info file
nfsd: escape high characters in binary data
nfsd: copy client's address including port number to cl_addr
nfsd4: add a client info file
nfsd: make client/ directory names small ints
nfsd: add nfsd/clients directory
nfsd4: use reference count to free client
nfsd: rename cl_refcount
nfsd: persist nfsd filesystem across mounts
...
Linus Torvalds [Thu, 11 Jul 2019 04:20:05 +0000 (21:20 -0700)]
Merge tag 'gfs2-for-5.3' of git://git./linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
"Some relatively minor changes for gfs2:
- An initial batch of obvious cleanups and fixes from Bob's recovery
patch queue.
- Two iomap conversion patches and some cleanups from Christoph
Hellwig.
- A cosmetic cleanup from Kefeng Wang (Huawei).
- Another minor fix and cleanup by me"
* tag 'gfs2-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Remove unused gfs2_iomap_alloc argument
gfs2: don't use buffer_heads in gfs2_allocate_page_backing
gfs2: use iomap_bmap instead of generic_block_bmap
gfs2: mark stuffed_readpage static
gfs2: merge gfs2_writepage_common into gfs2_writepage
gfs2: merge gfs2_writeback_aops and gfs2_ordered_aops
gfs2: remove the unused gfs2_stuffed_write_end function
gfs2: use page_offset in gfs2_page_mkwrite
gfs2: replace more printk with calls to fs_info and friends
gfs2: dump fsid when dumping glock problems
gfs2: simplify gfs2_freeze by removing case
gfs2: Rename SDF_SHUTDOWN to SDF_WITHDRAWN
gfs2: Warn when a journal replay overwrites a rgrp with buffers
gfs2: log which portion of the journal is replayed
gfs2: eliminate tr_num_revoke_rm
gfs2: kthread and remount improvements
gfs2: Use IS_ERR_OR_NULL
gfs2: Clean up freeing struct gfs2_sbd
Linus Torvalds [Thu, 11 Jul 2019 04:06:01 +0000 (21:06 -0700)]
Merge tag 'ext4_for_linus' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Many bug fixes and cleanups, and an optimization for case-insensitive
lookups"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix coverity warning on error path of filename setup
ext4: replace ktype default_attrs with default_groups
ext4: rename htree_inline_dir_to_tree() to ext4_inlinedir_to_tree()
ext4: refactor initialize_dirent_tail()
ext4: rename "dirent_csum" functions to use "dirblock"
ext4: allow directory holes
jbd2: drop declaration of journal_sync_buffer()
ext4: use jbd2_inode dirty range scoping
jbd2: introduce jbd2_inode dirty range scoping
mm: add filemap_fdatawait_range_keep_errors()
ext4: remove redundant assignment to node
ext4: optimize case-insensitive lookups
ext4: make __ext4_get_inode_loc plug
ext4: clean up kerneldoc warnigns when building with W=1
ext4: only set project inherit bit for directory
ext4: enforce the immutable flag on open files
ext4: don't allow any modifications to an immutable file
jbd2: fix typo in comment of journal_submit_inode_data_buffers
jbd2: fix some print format mistakes
ext4: gracefully handle ext4_break_layouts() failure during truncate
Linus Torvalds [Thu, 11 Jul 2019 03:55:33 +0000 (20:55 -0700)]
Merge tag 'afs-next-
20190628' of git://git./linux/kernel/git/dhowells/linux-fs
Pull afs updates from David Howells:
"A set of minor changes for AFS:
- Remove an unnecessary check in afs_unlink()
- Add a tracepoint for tracking callback management
- Add a tracepoint for afs_server object usage
- Use struct_size()
- Add mappings for AFS UAE abort codes to Linux error codes, using
symbolic names rather than hex numbers in the .c file"
* tag 'afs-next-
20190628' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Add support for the UAE error table
fs/afs: use struct_size() in kzalloc()
afs: Trace afs_server usage
afs: Add some callback management tracepoints
afs: afs_unlink() doesn't need to check dentry->d_inode
Linus Torvalds [Thu, 11 Jul 2019 03:51:03 +0000 (20:51 -0700)]
Merge tag 'fscrypt-for-linus' of git://git./fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
- Preparations for supporting encryption on ext4 filesystems where the
filesystem block size is smaller than PAGE_SIZE.
- Don't allow setting encryption policies on dead directories.
- Various cleanups.
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: document testing with xfstests
fscrypt: remove selection of CONFIG_CRYPTO_SHA256
fscrypt: remove unnecessary includes of ratelimit.h
fscrypt: don't set policy for a dead directory
ext4: encrypt only up to last block in ext4_bio_write_page()
ext4: decrypt only the needed block in __ext4_block_zero_page_range()
ext4: decrypt only the needed blocks in ext4_block_write_begin()
ext4: clear BH_Uptodate flag on decryption error
fscrypt: decrypt only the needed blocks in __fscrypt_decrypt_bio()
fscrypt: support decrypting multiple filesystem blocks per page
fscrypt: introduce fscrypt_decrypt_block_inplace()
fscrypt: handle blocksize < PAGE_SIZE in fscrypt_zeroout_range()
fscrypt: support encrypting multiple filesystem blocks per page
fscrypt: introduce fscrypt_encrypt_block_inplace()
fscrypt: clean up some BUG_ON()s in block encryption/decryption
fscrypt: rename fscrypt_do_page_crypto() to fscrypt_crypt_block()
fscrypt: remove the "write" part of struct fscrypt_ctx
fscrypt: simplify bounce page handling
Linus Torvalds [Thu, 11 Jul 2019 03:32:37 +0000 (20:32 -0700)]
Merge tag 'copy-file-range-fixes-1' of git://git./fs/xfs/xfs-linux
Pull copy_file_range updates from Darrick Wong:
"This fixes numerous parameter checking problems and inconsistent
behaviors in the new(ish) copy_file_range system call.
Now the system call will actually check its range parameters
correctly; refuse to copy into files for which the caller does not
have sufficient privileges; update mtime and strip setuid like file
writes are supposed to do; and allows copying up to the EOF of the
source file instead of failing the call like we used to.
Summary:
- Create a generic copy_file_range handler and make individual
filesystems responsible for calling it (i.e. no more assuming that
do_splice_direct will work or is appropriate)
- Refactor copy_file_range and remap_range parameter checking where
they are the same
- Install missing copy_file_range parameter checking(!)
- Remove suid/sgid and update mtime like any other file write
- Change the behavior so that a copy range crossing the source file's
eof will result in a short copy to the source file's eof instead of
EINVAL
- Permit filesystems to decide if they want to handle
cross-superblock copy_file_range in their local handlers"
* tag 'copy-file-range-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
fuse: copy_file_range needs to strip setuid bits and update timestamps
vfs: allow copy_file_range to copy across devices
xfs: use file_modified() helper
vfs: introduce file_modified() helper
vfs: add missing checks to copy_file_range
vfs: remove redundant checks from generic_remap_checks()
vfs: introduce generic_file_rw_checks()
vfs: no fallback for ->copy_file_range
vfs: introduce generic_copy_file_range()
Linus Torvalds [Thu, 11 Jul 2019 03:29:45 +0000 (20:29 -0700)]
Merge tag 'iomap-5.3-merge-1' of git://git./fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"There are a few fixes for gfs2 but otherwise it's pretty quiet so far.
- Only mark inode dirty at the end of writing to a file (instead of
once for every page written).
- Fix for an accounting error in the page_done callback"
* tag 'iomap-5.3-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: fix page_done callback for short writes
fs: fold __generic_write_end back into generic_write_end
iomap: don't mark the inode dirty in iomap_write_end
Linus Torvalds [Thu, 11 Jul 2019 03:27:07 +0000 (20:27 -0700)]
Merge tag 'for_v5.3-rc1' of git://git./linux/kernel/git/jack/linux-fs
Pull ext2, udf and quota updates from Jan Kara:
- some ext2 fixes and cleanups
- a fix of udf bug when extending files
- a fix of quota Q_XGETQSTAT[V] handling
* tag 'for_v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix incorrect final NOT_ALLOCATED (hole) extent length
ext2: Use kmemdup rather than duplicating its implementation
quota: honor quota type in Q_XGETQSTAT[V] calls
ext2: Always brelse bh on failure in ext2_iget()
ext2: add missing brelse() in ext2_iget()
ext2: Fix a typo in ext2_getattr argument
ext2: fix a typo in comment
ext2: add missing brelse() in ext2_new_inode()
ext2: optimize ext2_xattr_get()
ext2: introduce new helper for xattr entry comparison
ext2: merge xattr next entry check to ext2_xattr_entry_valid()
ext2: code cleanup for ext2_preread_inode()
ext2: code cleanup by using test_opt() and clear_opt()
doc: ext2: update description of quota options for ext2
ext2: Strengthen xattr block checks
ext2: Merge loops in ext2_xattr_set()
ext2: introduce helper for xattr entry validation
ext2: introduce helper for xattr header validation
quota: add dqi_dirty_list description to comment of Dquot List Management
Linus Torvalds [Thu, 11 Jul 2019 03:09:17 +0000 (20:09 -0700)]
Merge tag 'fsnotify_for_v5.3-rc1' of git://git./linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"This contains cleanups of the fsnotify name removal hook and also a
patch to disable fanotify permission events for 'proc' filesystem"
* tag 'fsnotify_for_v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: get rid of fsnotify_nameremove()
fsnotify: move fsnotify_nameremove() hook out of d_delete()
configfs: call fsnotify_rmdir() hook
debugfs: call fsnotify_{unlink,rmdir}() hooks
debugfs: simplify __debugfs_remove_file()
devpts: call fsnotify_unlink() hook
tracefs: call fsnotify_{unlink,rmdir}() hooks
rpc_pipefs: call fsnotify_{unlink,rmdir}() hooks
btrfs: call fsnotify_rmdir() hook
fsnotify: add empty fsnotify_{unlink,rmdir}() hooks
fanotify: Disallow permission events for proc filesystem
Linus Torvalds [Thu, 11 Jul 2019 02:21:38 +0000 (19:21 -0700)]
Merge tag 'locks-v5.3-1' of git://git./linux/kernel/git/jlayton/linux
Pull file locking updates from Jeff Layton:
"Just a couple of small lease-related patches this cycle.
One from Ira to add a new tracepoint that fires during lease conflict
checks, and another patch from Amir to reduce false positives when
checking for lease conflicts"
* tag 'locks-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
locks: eliminate false positive conflicts for write lease
locks: Add trace_leases_conflict
Linus Torvalds [Thu, 11 Jul 2019 01:43:43 +0000 (18:43 -0700)]
Revert "Merge tag 'keys-acl-
20190703' of git://git./linux/kernel/git/dhowells/linux-fs"
This reverts merge
0f75ef6a9cff49ff612f7ce0578bced9d0b38325 (and thus
effectively commits
7a1ade847596 ("keys: Provide KEYCTL_GRANT_PERMISSION")
2e12256b9a76 ("keys: Replace uid/gid/perm permissions checking with an ACL")
that the merge brought in).
It turns out that it breaks booting with an encrypted volume, and Eric
biggers reports that it also breaks the fscrypt tests [1] and loading of
in-kernel X.509 certificates [2].
The root cause of all the breakage is likely the same, but David Howells
is off email so rather than try to work it out it's getting reverted in
order to not impact the rest of the merge window.
[1] https://lore.kernel.org/lkml/
20190710011559.GA7973@sol.localdomain/
[2] https://lore.kernel.org/lkml/
20190710013225.GB7973@sol.localdomain/
Link: https://lore.kernel.org/lkml/CAHk-=wjxoeMJfeBahnWH=9zShKp2bsVy527vo3_y8HfOdhwAAw@mail.gmail.com/
Reported-by: Eric Biggers <ebiggers@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rafael J. Wysocki [Wed, 10 Jul 2019 09:52:50 +0000 (11:52 +0200)]
Revert "ACPICA: Update table load object initialization"
Revert commit
c522ad0637ca ("ACPICA: Update table load object
initialization") as it causes systems to hang on attempts to load
OEM ACPI tables.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Steven J. Magnani [Mon, 1 Jul 2019 02:39:35 +0000 (21:39 -0500)]
udf: Fix incorrect final NOT_ALLOCATED (hole) extent length
In some cases, using the 'truncate' command to extend a UDF file results
in a mismatch between the length of the file's extents (specifically, due
to incorrect length of the final NOT_ALLOCATED extent) and the information
(file) length. The discrepancy can prevent other operating systems
(i.e., Windows 10) from opening the file.
Two particular errors have been observed when extending a file:
1. The final extent is larger than it should be, having been rounded up
to a multiple of the block size.
B. The final extent is not shorter than it should be, due to not having
been updated when the file's information length was increased.
[JK: simplified udf_do_extend_final_block(), fixed up some types]
Fixes: 2c948b3f86e5 ("udf: Avoid IO in udf_clear_inode")
CC: stable@vger.kernel.org
Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Link: https://lore.kernel.org/r/1561948775-5878-1-git-send-email-steve@digidescorp.com
Signed-off-by: Jan Kara <jack@suse.cz>
Santosh Shilimkar [Fri, 28 Jun 2019 22:38:58 +0000 (15:38 -0700)]
rds: avoid version downgrade to legitimate newer peer connections
Connections with legitimate tos values can get into usual connection
race. It can result in consumer reject. We don't want tos value or
protocol version to be demoted for such connections otherwise
piers would end up different tos values which can results in
no connection. Example a peer initiated connection with say
tos 8 while usual connection racing can get downgraded to tos 0
which is not desirable.
Patch fixes above issue introduced by commit
commit
d021fabf525f ("rds: rdma: add consumer reject")
Reported-by: Yanjun Zhu <yanjun.zhu@oracle.com>
Tested-by: Yanjun Zhu <yanjun.zhu@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Gerd Rausch [Sat, 29 Jun 2019 00:41:16 +0000 (17:41 -0700)]
rds: Return proper "tos" value to user-space
The proper "tos" value needs to be returned
to user-space (sockopt RDS_INFO_CONNECTIONS).
Fixes: 3eb450367d08 ("rds: add type of service(tos) infrastructure")
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Gerd Rausch [Thu, 27 Jun 2019 16:21:44 +0000 (09:21 -0700)]
rds: Accept peer connection reject messages due to incompatible version
Prior to
commit
d021fabf525ff ("rds: rdma: add consumer reject")
function "rds_rdma_cm_event_handler_cmn" would always honor a rejected
connection attempt by issuing a "rds_conn_drop".
The commit mentioned above added a "break", eliminating
the "fallthrough" case and made the "rds_conn_drop" rather conditional:
Now it only happens if a "consumer defined" reject (i.e. "rdma_reject")
carries an integer-value of "1" inside "private_data":
if (!conn)
break;
err = (int *)rdma_consumer_reject_data(cm_id, event, &len);
if (!err || (err && ((*err) == RDS_RDMA_REJ_INCOMPAT))) {
pr_warn("RDS/RDMA: conn <%pI6c, %pI6c> rejected, dropping connection\n",
&conn->c_laddr, &conn->c_faddr);
conn->c_proposed_version = RDS_PROTOCOL_COMPAT_VERSION;
rds_conn_drop(conn);
}
rdsdebug("Connection rejected: %s\n",
rdma_reject_msg(cm_id, event->status));
break;
/* FALLTHROUGH */
A number of issues are worth mentioning here:
#1) Previous versions of the RDS code simply rejected a connection
by calling "rdma_reject(cm_id, NULL, 0);"
So the value of the payload in "private_data" will not be "1",
but "0".
#2) Now the code has become dependent on host byte order and sizing.
If one peer is big-endian, the other is little-endian,
or there's a difference in sizeof(int) (e.g. ILP64 vs LP64),
the *err check does not work as intended.
#3) There is no check for "len" to see if the data behind *err is even valid.
Luckily, it appears that the "rdma_reject(cm_id, NULL, 0)" will always
carry 148 bytes of zeroized payload.
But that should probably not be relied upon here.
#4) With the added "break;",
we might as well drop the misleading "/* FALLTHROUGH */" comment.
This commit does _not_ address issue #2, as the sender would have to
agree on a byte order as well.
Here is the sequence of messages in this observed error-scenario:
Host-A is pre-QoS changes (excluding the commit mentioned above)
Host-B is post-QoS changes (including the commit mentioned above)
#1 Host-B
issues a connection request via function "rds_conn_path_transition"
connection state transitions to "RDS_CONN_CONNECTING"
#2 Host-A
rejects the incompatible connection request (from #1)
It does so by calling "rdma_reject(cm_id, NULL, 0);"
#3 Host-B
receives an "RDMA_CM_EVENT_REJECTED" event (from #2)
But since the code is changed in the way described above,
it won't drop the connection here, simply because "*err == 0".
#4 Host-A
issues a connection request
#5 Host-B
receives an "RDMA_CM_EVENT_CONNECT_REQUEST" event
and ends up calling "rds_ib_cm_handle_connect".
But since the state is already in "RDS_CONN_CONNECTING"
(as of #1) it will end up issuing a "rdma_reject" without
dropping the connection:
if (rds_conn_state(conn) == RDS_CONN_CONNECTING) {
/* Wait and see - our connect may still be succeeding */
rds_ib_stats_inc(s_ib_connect_raced);
}
goto out;
#6 Host-A
receives an "RDMA_CM_EVENT_REJECTED" event (from #5),
drops the connection and tries again (goto #4) until it gives up.
Tested-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Gerd Rausch [Sat, 29 Jun 2019 00:31:19 +0000 (17:31 -0700)]
Revert "RDS: IB: split the mr registration and invalidation path"
This reverts commit
56012459310a1dbcc55c2dbf5500a9f7571402cb.
RDS kept spinning inside function "rds_ib_post_reg_frmr", waiting for
"i_fastreg_wrs" to become incremented:
while (atomic_dec_return(&ibmr->ic->i_fastreg_wrs) <= 0) {
atomic_inc(&ibmr->ic->i_fastreg_wrs);
cpu_relax();
}
Looking at the original commit:
commit
56012459310a ("RDS: IB: split the mr registration and
invalidation path")
In there, the "rds_ib_mr_cqe_handler" was changed in the following
way:
void rds_ib_mr_cqe_handler(struct
rds_ib_connection *ic,
struct ib_wc *wc)
if (frmr->fr_inv) {
frmr->fr_state = FRMR_IS_FREE;
frmr->fr_inv = false;
atomic_inc(&ic->i_fastreg_wrs);
} else {
atomic_inc(&ic->i_fastunreg_wrs);
}
It looks like it's got it exactly backwards:
Function "rds_ib_post_reg_frmr" keeps track of the outstanding
requests via "i_fastreg_wrs".
Function "rds_ib_post_inv" keeps track of the outstanding requests
via "i_fastunreg_wrs" (post original commit). It also sets:
frmr->fr_inv = true;
However the completion handler "rds_ib_mr_cqe_handler" adjusts
"i_fastreg_wrs" when "fr_inv" had been true, and adjusts
"i_fastunreg_wrs" otherwise.
The original commit was done in the name of performance:
to remove the performance bottleneck
No performance benefit could be observed with a fixed-up version
of the original commit measured between two Oracle X7 servers,
both equipped with Mellanox Connect-X5 HCAs.
The prudent course of action is to revert this commit.
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Santosh Shilimkar [Wed, 19 Jun 2019 05:12:05 +0000 (22:12 -0700)]
rds: fix reordering with composite message notification
RDS composite message(rdma + control) user notification needs to be
triggered once the full message is delivered and such a fix was
added as part of commit
941f8d55f6d61 ("RDS: RDMA: Fix the composite
message user notification"). But rds_send_remove_from_sock is missing
data part notify check and hence at times the user don't get
notification which isn't desirable.
One way is to fix the rds_send_remove_from_sock to check of that case
but considering the ordering complexity with completion handler and
rdma + control messages are always dispatched back to back in same send
context, just delaying the signaled completion on rmda work request also
gets the desired behaviour. i.e Notifying application only after
RDMA + control message send completes. So patch updates the earlier
fix with this approach. The delay signaling completions of rdma op
till the control message send completes fix was done by Venkat
Venkatsubra in downstream kernel.
Reviewed-and-tested-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Nathan Chancellor [Mon, 8 Jul 2019 23:11:55 +0000 (16:11 -0700)]
net/mlx5e: Return in default case statement in tx_post_resync_params
clang warns:
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c:251:2:
warning: variable 'rec_seq_sz' is used uninitialized whenever switch
default is taken [-Wsometimes-uninitialized]
default:
^~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c:255:46: note:
uninitialized use occurs here
skip_static_post = !memcmp(rec_seq, &rn_be, rec_seq_sz);
^~~~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c:239:16: note:
initialize the variable 'rec_seq_sz' to silence this warning
u16 rec_seq_sz;
^
= 0
1 warning generated.
This case statement was clearly designed to be one that should not be
hit during runtime because of the WARN_ON statement so just return early
to prevent copying uninitialized memory up into rn_be.
Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Link: https://github.com/ClangBuiltLinux/linux/issues/590
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 10 Jul 2019 04:35:08 +0000 (21:35 -0700)]
mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
Return value was changes to 'int' from void but this return statement
was not updated, or it slipped in via a merge.
Fixes: b5d9a834f4fd ("net/tls: don't clear TX resync flag on error")
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Mon, 8 Jul 2019 12:54:08 +0000 (20:54 +0800)]
nfsd: Make __get_nfsdfs_client() static
Fix sparse warning:
fs/nfsd/nfsctl.c:1221:22: warning:
symbol '__get_nfsdfs_client' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
YueHaibing [Mon, 8 Jul 2019 07:29:33 +0000 (15:29 +0800)]
nfsd: Make two functions static
Fix sparse warnings:
fs/nfsd/nfs4state.c:1908:6: warning: symbol 'drop_client' was not declared. Should it be static?
fs/nfsd/nfs4state.c:2518:6: warning: symbol 'force_expire_client' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Vivien Didelot [Tue, 9 Jul 2019 03:31:13 +0000 (23:31 -0400)]
net: dsa: add support for BRIDGE_MROUTER attribute
This patch adds support for enabling or disabling the flooding of
unknown multicast traffic on the CPU ports, depending on the value
of the switchdev SWITCHDEV_ATTR_ID_BRIDGE_MROUTER attribute.
The current behavior is kept unchanged but a user can now prevent
the CPU conduit to be flooded with a lot of unregistered traffic that
the network stack needs to filter in software with e.g.:
echo 0 > /sys/class/net/br0/multicast_router
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Tue, 9 Jul 2019 21:45:17 +0000 (14:45 -0700)]
pkt_sched: Include const.h
Commit
9903c8dc7342 changed TC_ETF defines to use _BITUL instead of BIT
but did not add the dependecy on linux/const.h. As a consequence,
importing the uapi headers into iproute2 causes builds to fail. Add
the dependency.
Fixes: 9903c8dc7342 ("etf: Don't use BIT() in UAPI headers.")
Cc: Vedang Patel <vedang.patel@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilias Apalodimas [Tue, 9 Jul 2019 21:14:49 +0000 (00:14 +0300)]
net: netsec: remove static declaration for netsec_set_tx_de()
On commit
ba2b232108d3 ("net: netsec: add XDP support") a static
declaration for netsec_set_tx_de() was added to make the diff easier
to read. Now that the patch is merged let's move the functions around
and get rid of that
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilias Apalodimas [Tue, 9 Jul 2019 21:14:48 +0000 (00:14 +0300)]
net: netsec: remove superfluous if statement
While freeing tx buffers the memory has to be unmapped if the packet was
an skb or was used for .ndo_xdp_xmit using the same arguments. Get rid
of the unneeded extra 'else if' statement
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 9 Jul 2019 21:38:51 +0000 (14:38 -0700)]
Merge branch 'nf-hw-offload'
Pablo Neira Ayuso says:
====================
netfilter: add hardware offload infrastructure
This patchset adds support for Netfilter hardware offloads.
This patchset reuses the existing block infrastructure, the
netdev_ops->ndo_setup_tc() interface, TC_SETUP_CLSFLOWER classifier and
the flow rule API.
Patch #1 adds flow_block_cb_setup_simple(), most drivers do the same thing
to set up flow blocks, to reduce the number of changes, consolidate
codebase. Use _simple() postfix as requested by Jakub Kicinski.
This new function resides in net/core/flow_offload.c
Patch #2 renames TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND.
Patch #3 renames TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*.
Patch #4 adds flow_block_cb_alloc() and flow_block_cb_free() helper
functions, this is the first patch of the flow block API.
Patch #5 adds the helper to deal with list operations in the flow block API.
This includes flow_block_cb_lookup(), flow_block_cb_add() and
flow_block_cb_remove().
Patch #6 adds flow_block_cb_priv(), flow_block_cb_incref() and
flow_block_cb_decref() which completes the flow block API.
Patch #7 updates the cls_api to use the flow block API from the new
tcf_block_setup(). This infrastructure transports these objects
via list (through the tc_block_offload object) back to the core
for registration.
CLS_API DRIVER
TC_SETUP_BLOCK ----------> setup flow_block_cb object &
it adds object to flow_block_offload->cb_list
|
CLS_API <-----------------------'
registers list with flow blocks
flow_block_cb & travels back to
calls ->reoffload the core for registration
drivers allocate and sets up (configure the blocks), then
registration happens from the core (cls_api and netfilter).
Patch #8 updates drivers to use the flow block API.
Patch #9 removes the tcf block callback API, which is replaced by the
flow block API.
Patch #10 adds the flow_block_cb_is_busy() helper to check if the block
is already used by a subsystem. This helper is invoked from
drivers. Once drivers are updated to support for multiple
subsystems, they can remove this check.
Patch #11 rename tc structure and definitions for the block bind/unbind
path.
Patch #12 introduces basic netfilter hardware offload infrastructure
for the ingress chain. This includes 5-tuple exact matching
and accept / drop rule actions. Only basechains are supported
at this stage, no .reoffload callback is implemented either.
Default policy to "accept" is only supported for now.
table netdev filter {
chain ingress {
type filter hook ingress device eth0 priority 0; flags offload;
ip daddr 192.168.0.10 tcp dport 22 drop
}
}
This patchset reuses the existing tcf block callback API and it places it
in the flow block callback API in net/core/flow_offload.c.
This series aims to address Jakub and Jiri's feedback, please see specific
patches in this batch for changelog in this v4.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Tue, 9 Jul 2019 21:00:43 +0000 (23:00 +0200)]
netfilter: nf_tables: add hardware offload support
This patch adds hardware offload support for nftables through the
existing netdev_ops->ndo_setup_tc() interface, the TC_SETUP_CLSFLOWER
classifier and the flow rule API. This hardware offload support is
available for the NFPROTO_NETDEV family and the ingress hook.
Each nftables expression has a new ->offload interface, that is used to
populate the flow rule object that is attached to the transaction
object.
There is a new per-table NFT_TABLE_F_HW flag, that is set on to offload
an entire table, including all of its chains.
This patch supports for basic metadata (layer 3 and 4 protocol numbers),
5-tuple payload matching and the accept/drop actions; this also includes
basechain hardware offload only.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Tue, 9 Jul 2019 20:55:49 +0000 (22:55 +0200)]
net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
And any other existing fields in this structure that refer to tc.
Specifically:
* tc_cls_flower_offload_flow_rule() to flow_cls_offload_flow_rule().
* TC_CLSFLOWER_* to FLOW_CLS_*.
* tc_cls_common_offload to tc_cls_common_offload.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Tue, 9 Jul 2019 20:55:48 +0000 (22:55 +0200)]
net: flow_offload: add flow_block_cb_is_busy() and use it
This patch adds a function to check if flow block callback is already in
use. Call this new function from flow_block_cb_setup_simple() and from
drivers.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Tue, 9 Jul 2019 20:55:47 +0000 (22:55 +0200)]
net: sched: remove tcf block API
Unused, now replaced by flow block API.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Tue, 9 Jul 2019 20:55:46 +0000 (22:55 +0200)]
drivers: net: use flow block API
This patch updates flow_block_cb_setup_simple() to use the flow block API.
Several drivers are also adjusted to use it.
This patch introduces the per-driver list of flow blocks to account for
blocks that are already in use.
Remove tc_block_offload alias.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Tue, 9 Jul 2019 20:55:45 +0000 (22:55 +0200)]
net: sched: use flow block API
This patch adds tcf_block_setup() which uses the flow block API.
This infrastructure takes the flow block callbacks coming from the
driver and register/unregister to/from the cls_api core.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Tue, 9 Jul 2019 20:55:44 +0000 (22:55 +0200)]
net: flow_offload: add flow_block_cb_{priv, incref, decref}()
This patch completes the flow block API to introduce:
* flow_block_cb_priv() to access callback private data.
* flow_block_cb_incref() to bump reference counter on this flow block.
* flow_block_cb_decref() to decrement the reference counter.
These functions are taken from the existing tcf_block_cb_priv(),
tcf_block_cb_incref() and tcf_block_cb_decref().
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Tue, 9 Jul 2019 20:55:43 +0000 (22:55 +0200)]
net: flow_offload: add list handling functions
This patch adds the list handling functions for the flow block API:
* flow_block_cb_lookup() allows drivers to look up for existing flow blocks.
* flow_block_cb_add() adds a flow block to the per driver list to be registered
by the core.
* flow_block_cb_remove() to remove a flow block from the list of existing
flow blocks per driver and to request the core to unregister this.
The flow block API also annotates the netns this flow block belongs to.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Tue, 9 Jul 2019 20:55:42 +0000 (22:55 +0200)]
net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
Add a new helper function to allocate flow_block_cb objects.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Tue, 9 Jul 2019 20:55:41 +0000 (22:55 +0200)]
net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
Rename from TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* and
remove temporary tcf_block_binder_type alias.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Tue, 9 Jul 2019 20:55:40 +0000 (22:55 +0200)]
net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
Rename from TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND and remove
temporary tc_block_command alias.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Tue, 9 Jul 2019 20:55:39 +0000 (22:55 +0200)]
net: flow_offload: add flow_block_cb_setup_simple()
Most drivers do the same thing to set up the flow block callbacks, this
patch adds a helper function to do this.
This preparation patch reduces the number of changes to adapt the
existing drivers to use the flow block callback API.
This new helper function takes a flow block list per-driver, which is
set to NULL until this driver list is used.
This patch also introduces the flow_block_command and
flow_block_binder_type enumerations, which are renamed to use
FLOW_BLOCK_* in follow up patches.
There are three definitions (aliases) in order to reduce the number of
updates in this patch, which go away once drivers are fully adapted to
use this flow block API.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 9 Jul 2019 21:29:27 +0000 (14:29 -0700)]
Merge branch 'net-hisilicon-Add-support-for-HI13X1-to-hip04_eth'
Jiangfeng Xiao says:
====================
net: hisilicon: Add support for HI13X1 to hip04_eth
The main purpose of this patch series is to extend the
hip04_eth driver to support HI13X1_GMAC.
The offset and bitmap of some registers of HI13X1_GMAC
are different from hip04_eth common soc. In addition,
the definition of send descriptor and parsing descriptor
are different from hip04_eth common soc. So the macro
of the register offset is redefined to adapt the HI13X1_GMAC.
Clean up the sparse warning by the way.
Change since v1:
* Add a cover letter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiangfeng Xiao [Tue, 9 Jul 2019 03:31:11 +0000 (11:31 +0800)]
net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
HI13X1 changed the offsets and bitmaps for tx_desc
registers in the same peripheral device on different
models of the hip04_eth.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiangfeng Xiao [Tue, 9 Jul 2019 03:31:10 +0000 (11:31 +0800)]
net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
HI13X1 changed the offsets and bitmaps for rx_desc
registers in the same peripheral device on different
models of the hip04_eth.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiangfeng Xiao [Tue, 9 Jul 2019 03:31:09 +0000 (11:31 +0800)]
net: hisilicon: Offset buf address to adapt HI13X1_GMAC
The buf unit size of HI13X1_GMAC is cache_line_size,
which is 64, so the address we write to the buf register
needs to be shifted right by 6 bits.
The 31st bit of the PPE_CFG_CPU_ADD_ADDR register
of HI13X1_GMAC indicates whether to release the buffer
of the message, and the low indicates that it is valid.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiangfeng Xiao [Tue, 9 Jul 2019 03:31:08 +0000 (11:31 +0800)]
net: hisilicon: Add group field to adapt HI13X1_GMAC
In general, group is the same as the port, but some
boards specify a special group for better load
balancing of each processing unit.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiangfeng Xiao [Tue, 9 Jul 2019 03:31:07 +0000 (11:31 +0800)]
net: hisilicon: dt-bindings: Add an field of port-handle
In general, group is the same as the port, but some
boards specify a special group for better load
balancing of each processing unit.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiangfeng Xiao [Tue, 9 Jul 2019 03:31:06 +0000 (11:31 +0800)]
net: hisilicon: HI13X1_GMAX need dreq reset at first
HI13X1_GMAC delete request for soft reset at first,
otherwise, the subsequent initialization will not
take effect.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiangfeng Xiao [Tue, 9 Jul 2019 03:31:05 +0000 (11:31 +0800)]
net: hisilicon: HI13X1_GMAX skip write LOCAL_PAGE_REG
HI13X1_GMAC changed the offsets and bitmaps for
GE_TX_LOCAL_PAGE_REG registers in the same peripheral
device on different models of the hip04_eth. With the
default configuration, HI13X1_GMAC can also work without
any writes to the GE_TX_LOCAL_PAGE_REG register.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiangfeng Xiao [Tue, 9 Jul 2019 03:31:04 +0000 (11:31 +0800)]
net: hisilicon: Cleanup for cast to restricted __be32
This patch fixes the following warning from sparse:
hip04_eth.c:533:23: warning: cast to restricted __be16
hip04_eth.c:533:23: warning: cast to restricted __be16
hip04_eth.c:533:23: warning: cast to restricted __be16
hip04_eth.c:533:23: warning: cast to restricted __be16
hip04_eth.c:534:23: warning: cast to restricted __be32
hip04_eth.c:534:23: warning: cast to restricted __be32
hip04_eth.c:534:23: warning: cast to restricted __be32
hip04_eth.c:534:23: warning: cast to restricted __be32
hip04_eth.c:534:23: warning: cast to restricted __be32
hip04_eth.c:534:23: warning: cast to restricted __be32
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiangfeng Xiao [Tue, 9 Jul 2019 03:31:03 +0000 (11:31 +0800)]
net: hisilicon: Cleanup for got restricted __be32
This patch fixes the following warning from sparse:
hip04_eth.c:468:25: warning: incorrect type in assignment
hip04_eth.c:468:25: expected unsigned int [usertype] send_addr
hip04_eth.c:468:25: got restricted __be32 [usertype]
hip04_eth.c:469:25: warning: incorrect type in assignment
hip04_eth.c:469:25: expected unsigned int [usertype] send_size
hip04_eth.c:469:25: got restricted __be32 [usertype]
hip04_eth.c:470:19: warning: incorrect type in assignment
hip04_eth.c:470:19: expected unsigned int [usertype] cfg
hip04_eth.c:470:19: got restricted __be32 [usertype]
hip04_eth.c:472:23: warning: incorrect type in assignment
hip04_eth.c:472:23: expected unsigned int [usertype] wb_addr
hip04_eth.c:472:23: got restricted __be32 [usertype]
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiangfeng Xiao [Tue, 9 Jul 2019 03:31:02 +0000 (11:31 +0800)]
net: hisilicon: Add support for HI13X1 to hip04_eth
Extend the hip04_eth driver to support HI13X1_GMAC.
Enable it with CONFIG_HI13X1_GMAC option.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 9 Jul 2019 21:17:59 +0000 (14:17 -0700)]
Merge branch 'stmmac-hash-table'
Biao Huang says:
====================
stmmac: fix out-of-boundary issue and add taller hash table support
Fix mac address out-of-boundary issue in net-next tree.
and resend the patch which was discussed in
https://lore.kernel.org/patchwork/patch/
1082117
but with no further progress.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Biao Huang [Tue, 9 Jul 2019 02:36:23 +0000 (10:36 +0800)]
net: stmmac: add support for hash table size 128/256 in dwmac4
1. get hash table size in hw feature reigster, and add support
for taller hash table(128/256) in dwmac4.
2. only clear GMAC_PACKET_FILTER bits used in this function,
to avoid side effect to functions of other bits.
stmmac selftests output log with flow control on:
ethtool -t eth0
The test result is PASS
The test extra info:
1. MAC Loopback 0
2. PHY Loopback -95
3. MMC Counters 0
4. EEE -95
5. Hash Filter MC 0
6. Perfect Filter UC 0
7. MC Filter 0
8. UC Filter 0
9. Flow Control 0
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Biao Huang [Tue, 9 Jul 2019 02:36:22 +0000 (10:36 +0800)]
net: stmmac: dwmac4: mac address array boudary violation issue
The mac address array size is GMAC_MAX_PERFECT_ADDRESSES,
so the 'reg' should be less than it, or will affect other registers.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 9 Jul 2019 21:07:20 +0000 (14:07 -0700)]
Merge branch 'tc-testing-Add-plugin-for-simple-traffic-generation'
Lucas Bates says:
====================
tc-testing: Add plugin for simple traffic generation
This series supersedes the previous submission that included a patch for test
case verification using JSON output. It adds a new tdc plugin, scapyPlugin, as
a way to send traffic to test tc filters and actions.
The first patch makes a change to the TdcPlugin module that will allow tdc
plugins to examine the test case currently being executed, so plugins can
play a more active role in testing by accepting information or commands from
the test case. This is required for scapyPlugin to work.
The second patch adds scapyPlugin itself, and an example test case file to
demonstrate how the scapy block works in the test cases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Lucas Bates [Tue, 9 Jul 2019 01:34:27 +0000 (21:34 -0400)]
tc-testing: introduce scapyPlugin for basic traffic
The scapyPlugin allows for simple traffic generation in tdc to
test various tc features. It was tested with scapy v2.4.2, but
should work with any successive version.
In order to use the plugin's functionality, scapy must be
installed. This can be done with:
pip3 install scapy
or to install 2.4.2:
pip3 install scapy==2.4.2
If the plugin is unable to import the scapy module, it will
terminate the tdc run.
The plugin makes use of a new key in the test case data, 'scapy'.
This block contains three other elements: 'iface', 'count', and
'packet':
"scapy": {
"iface": "$DEV0",
"count": 1,
"packet": "Ether(type=0x800)/IP(src='16.61.16.61')/ICMP()"
},
* iface is the name of the device on the host machine from which
the packet(s) will be sent. Values contained within tdc_config.py's
NAMES dict can be used here - this is useful if paired with
nsPlugin
* count is the number of copies of this packet to be sent
* packet is a string detailing the different layers of the packet
to be sent. If a property isn't explicitly set, scapy will set
default values for you.
Layers in the packet info are separated by slashes. For info about
common TCP and IP properties, see:
https://blogs.sans.org/pen-testing/files/2016/04/ScapyCheatSheet_v0.2.pdf
Caution is advised when running tests using the scapy functionality,
since the plugin blindly sends the packet as defined in the test case
data.
See creating-testcases/scapy-example.json for sample test cases;
the first test is intended to pass while the second is intended to
fail.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lucas Bates [Tue, 9 Jul 2019 01:34:26 +0000 (21:34 -0400)]
tc-testing: Allow tdc plugins to see test case data
Instead of only passing the test case name and ID, pass the
entire current test case down to the plugins. This change
allows plugins to start accepting commands and directives
from the test cases themselves, for greater flexibility
in testing.
Signed-off-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Tue, 9 Jul 2019 18:55:55 +0000 (20:55 +0200)]
net: dsa: vsc73xx: fix NET_DSA and OF dependencies
The restructuring of the driver got the dependencies wrong: without
CONFIG_NET_DSA we get this build failure:
WARNING: unmet direct dependencies detected for NET_DSA_VITESSE_VSC73XX
Depends on [n]: NETDEVICES [=y] && HAVE_NET_DSA [=y] && OF [=y] && NET_DSA [=n]
Selected by [m]:
- NET_DSA_VITESSE_VSC73XX_PLATFORM [=m] && NETDEVICES [=y] && HAVE_NET_DSA [=y] && HAS_IOMEM [=y]
ERROR: "dsa_unregister_switch" [drivers/net/dsa/vitesse-vsc73xx-core.ko] undefined!
ERROR: "dsa_switch_alloc" [drivers/net/dsa/vitesse-vsc73xx-core.ko] undefined!
ERROR: "dsa_register_switch" [drivers/net/dsa/vitesse-vsc73xx-core.ko] undefined!
Add the appropriate dependencies.
Fixes: 95711cd5f0b4 ("net: dsa: vsc73xx: Split vsc73xx driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 9 Jul 2019 20:03:04 +0000 (13:03 -0700)]
Merge branch 'Armada-8040-SoC-in-orion-mdio-hang'
Josua Mayer says:
====================
Fix hang of Armada 8040 SoC in orion-mdio
With a modular kernel as configured by Debian a hang was observed with
the Armada 8040 SoC in the Clearfog GT and Macchiatobin boards.
The 8040 SoC actually requires four clocks to be enabled for the mdio
interface to function. All 4 clocks are already specified in
armada-cp110.dtsi. It has however been missed that the orion-mdio driver
only supports enabling up to three clocks.
This patch-set allows the orion-mdio driver to handle four clocks and
adds a warning when more clocks are specified to prevent this particular
oversight in the future.
Changes since v1:
- fixed condition for priting the warning (Andrew Lunn)
- rephrased commit description for deferred probing (Andrew Lunn)
- fixed compiler warnings (kbuild test robot)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Josua Mayer [Tue, 9 Jul 2019 13:01:01 +0000 (15:01 +0200)]
net: mvmdio: defer probe of orion-mdio if a clock is not ready
Defer probing of the orion-mdio interface when getting a clock returns
EPROBE_DEFER. This avoids locking up the Armada 8k SoC when mdio is used
before all clocks have been enabled.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Josua Mayer [Tue, 9 Jul 2019 13:01:00 +0000 (15:01 +0200)]
net: mvmdio: print warning when orion-mdio has too many clocks
Print a warning when device tree specifies more than the maximum of four
clocks supported by orion-mdio. Because reading from mdio can lock up
the Armada 8k when a required clock is not initialized, it is important
to notify the user when a specified clock is ignored.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Josua Mayer [Tue, 9 Jul 2019 13:00:59 +0000 (15:00 +0200)]
net: mvmdio: allow up to four clocks to be specified for orion-mdio
Allow up to four clocks to be specified and enabled for the orion-mdio
interface, which are required by the Armada 8k and defined in
armada-cp110.dtsi.
Fixes a hang in probing the mvmdio driver that was encountered on the
Clearfog GT 8K with all drivers built as modules, but also affects other
boards such as the MacchiatoBIN.
Cc: stable@vger.kernel.org
Fixes: 96cb43423822 ("net: mvmdio: allow up to three clocks to be specified for orion-mdio")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Josua Mayer [Tue, 9 Jul 2019 13:00:58 +0000 (15:00 +0200)]
dt-bindings: allow up to four clocks for orion-mdio
Armada 8040 needs four clocks to be enabled for MDIO accesses to work.
Update the binding to allow the extra clock to be specified.
Cc: stable@vger.kernel.org
Fixes: 6d6a331f44a1 ("dt-bindings: allow up to three clocks for orion-mdio")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilias Apalodimas [Tue, 9 Jul 2019 12:35:53 +0000 (15:35 +0300)]
net: netsec: start using buffers if page_pool registration succeeded
The current driver starts using page_pool buffers before calling
xdp_rxq_info_reg_mem_model(). Start using the buffers after the
registration succeeded, so we won't have to call
page_pool_request_shutdown() in case of failure
Fixes: 5c67bf0ec4d0 ("net: netsec: Use page_pool API")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 9 Jul 2019 19:34:26 +0000 (12:34 -0700)]
Merge tag 'docs-5.3' of git://git.lwn.net/linux
Pull Documentation updates from Jonathan Corbet:
"It's been a relatively busy cycle for docs:
- A fair pile of RST conversions, many from Mauro. These create more
than the usual number of simple but annoying merge conflicts with
other trees, unfortunately. He has a lot more of these waiting on
the wings that, I think, will go to you directly later on.
- A new document on how to use merges and rebases in kernel repos,
and one on Spectre vulnerabilities.
- Various improvements to the build system, including automatic
markup of function() references because some people, for reasons I
will never understand, were of the opinion that
:c:func:``function()`` is unattractive and not fun to type.
- We now recommend using sphinx 1.7, but still support back to 1.4.
- Lots of smaller improvements, warning fixes, typo fixes, etc"
* tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits)
docs: automarkup.py: ignore exceptions when seeking for xrefs
docs: Move binderfs to admin-guide
Disable Sphinx SmartyPants in HTML output
doc: RCU callback locks need only _bh, not necessarily _irq
docs: format kernel-parameters -- as code
Doc : doc-guide : Fix a typo
platform: x86: get rid of a non-existent document
Add the RCU docs to the core-api manual
Documentation: RCU: Add TOC tree hooks
Documentation: RCU: Rename txt files to rst
Documentation: RCU: Convert RCU UP systems to reST
Documentation: RCU: Convert RCU linked list to reST
Documentation: RCU: Convert RCU basic concepts to reST
docs: filesystems: Remove uneeded .rst extension on toctables
scripts/sphinx-pre-install: fix out-of-tree build
docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/
Documentation: PGP: update for newer HW devices
Documentation: Add section about CPU vulnerabilities for Spectre
Documentation: platform: Delete x86-laptop-drivers.txt
docs: Note that :c:func: should no longer be used
...
projects / platform / kernel / linux-starfive.git / log