PCI: aardvark: Fix reading MSI interrupt number

[ Upstream commit 805dfc18dd3d4dd97a987d4406593b5a225b1253 ]

In advk_pcie_handle_msi() it is expected that when bit i in the W1C
register PCIE_MSI_STATUS_REG is cleared, the PCIE_MSI_PAYLOAD_REG is
updated to contain the MSI number corresponding to index i.

Experiments show that this is not so, and instead PCIE_MSI_PAYLOAD_REG
always contains the number of the last received MSI, overall.

Do not read PCIE_MSI_PAYLOAD_REG register for determining MSI interrupt
number. Since Aardvark already forbids more than 32 interrupts and uses
own allocated hwirq numbers, the msi_idx already corresponds to the
received MSI number.

Link: https://lore.kernel.org/r/20220110015018.26359-3-kabel@kernel.org
Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igb: refactor XDP registration

[ Upstream commit e62ad74aa534404b3ee7e250b114a3536ac56987 ]

On changing the RX ring parameters igb uses a hack to avoid a warning
when calling xdp_rxq_info_reg via igb_setup_rx_resources.  It just
clears the struct xdp_rxq_info content.

Instead, change this to unregister if we're already registered.  Align
code to the igc code.

Fixes: 9cbc948b5a20c ("igb: add XDP support")
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: avoid kernel warning when changing RX ring parameters

[ Upstream commit 453307b569a0d41bddd07f26bf41b784cd82a4c9 ]

Calling ethtool changing the RX ring parameters like this:

  $ ethtool -G eth0 rx 1024

on igc triggers kernel warnings like this:

[  225.198467] ------------[ cut here ]------------
[  225.198473] Missing unregister, handled but fix driver
[  225.198485] WARNING: CPU: 7 PID: 959 at net/core/xdp.c:168
xdp_rxq_info_reg+0x79/0xd0
[...]
[  225.198601] Call Trace:
[  225.198604]  <TASK>
[  225.198609]  igc_setup_rx_resources+0x3f/0xe0 [igc]
[  225.198617]  igc_ethtool_set_ringparam+0x30e/0x450 [igc]
[  225.198626]  ethnl_set_rings+0x18a/0x250
[  225.198631]  genl_family_rcv_msg_doit+0xca/0x110
[  225.198637]  genl_rcv_msg+0xce/0x1c0
[  225.198640]  ? rings_prepare_data+0x60/0x60
[  225.198644]  ? genl_get_cmd+0xd0/0xd0
[  225.198647]  netlink_rcv_skb+0x4e/0xf0
[  225.198652]  genl_rcv+0x24/0x40
[  225.198655]  netlink_unicast+0x20e/0x330
[  225.198659]  netlink_sendmsg+0x23f/0x480
[  225.198663]  sock_sendmsg+0x5b/0x60
[  225.198667]  __sys_sendto+0xf0/0x160
[  225.198671]  ? handle_mm_fault+0xb2/0x280
[  225.198676]  ? do_user_addr_fault+0x1eb/0x690
[  225.198680]  __x64_sys_sendto+0x20/0x30
[  225.198683]  do_syscall_64+0x38/0x90
[  225.198687]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  225.198693] RIP: 0033:0x7f7ae38ac3aa

igc_ethtool_set_ringparam() copies the igc_ring structure but neglects to
reset the xdp_rxq_info member before calling igc_setup_rx_resources().
This in turn calls xdp_rxq_info_reg() with an already registered xdp_rxq_info.

Make sure to unregister the xdp_rxq_info structure first in
igc_setup_rx_resources.

Fixes: 73f1071c1d29 ("igc: Add support for XDP_TX action")
Reported-by: Lennert Buytenhek <buytenh@arista.com>
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: mchp48l640: Add SPI ID table

[ Upstream commit 69a6d06878f05d63673b0dcdc3c3ef1af2996d46 ]

Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.

Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220202143404.16070-4-broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: mchp23k256: Add SPI ID table

[ Upstream commit bc7ee2e34b219da6813c17a1680dd20766648883 ]

Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.

Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220202143404.16070-3-broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: bcm2835: Fix the error handling in 'bcm2835_i2c_probe()'

[ Upstream commit b205f5850263632b6897d8f0bfaeeea4955f8663 ]

Some resource should be released if an error occurs in
'bcm2835_i2c_probe()'.
Add an error handling path and the needed 'clk_disable_unprepare()' and
'clk_rate_exclusive_put()' calls.

While at it, rework the bottom of the function to use this newly added
error handling path and have an explicit and more standard "return 0;" at
the end of the normal path.

Fixes: bebff81fb8b9 ("i2c: bcm2835: Model Divider in CCF")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[wsa: rebased]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: bcm2835: Use platform_get_irq() to get the interrupt

[ Upstream commit c3b2f911ac11892b672df7829becf28d3a830073 ]

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: asix: add proper error handling of usb read errors

[ Upstream commit 920a9fa27e7805499cfe78491b36fed2322c02ec ]

Syzbot once again hit uninit value in asix driver. The problem still the
same -- asix_read_cmd() reads less bytes, than was requested by caller.

Since all read requests are performed via asix_read_cmd() let's catch
usb related error there and add __must_check notation to be sure all
callers actually check return value.

So, this patch adds sanity check inside asix_read_cmd(), that simply
checks if bytes read are not less, than was requested and adds missing
error handling of asix_read_cmd() all across the driver code.

Fixes: d9fe64e51114 ("net: asix: Add in_pm parameter")
Reported-and-tested-by: syzbot+6ca9f7867b77c2d316ac@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

livepatch: Fix build failure on 32 bits processors

[ Upstream commit 2f293651eca3eacaeb56747dede31edace7329d2 ]

Trying to build livepatch on powerpc/32 results in:

kernel/livepatch/core.c: In function 'klp_resolve_symbols':
kernel/livepatch/core.c:221:23: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
  221 |                 sym = (Elf64_Sym *)sechdrs[symndx].sh_addr + ELF_R_SYM(relas[i].r_info);
      |                       ^
kernel/livepatch/core.c:221:21: error: assignment to 'Elf32_Sym *' {aka 'struct elf32_sym *'} from incompatible pointer type 'Elf64_Sym *' {aka 'struct elf64_sym *'} [-Werror=incompatible-pointer-types]
  221 |                 sym = (Elf64_Sym *)sechdrs[symndx].sh_addr + ELF_R_SYM(relas[i].r_info);
      |                     ^
kernel/livepatch/core.c: In function 'klp_apply_section_relocs':
kernel/livepatch/core.c:312:35: error: passing argument 1 of 'klp_resolve_symbols' from incompatible pointer type [-Werror=incompatible-pointer-types]
  312 |         ret = klp_resolve_symbols(sechdrs, strtab, symndx, sec, sec_objname);
      |                                   ^~~~~~~
      |                                   |
      |                                   Elf32_Shdr * {aka struct elf32_shdr *}
kernel/livepatch/core.c:193:44: note: expected 'Elf64_Shdr *' {aka 'struct elf64_shdr *'} but argument is of type 'Elf32_Shdr *' {aka 'struct elf32_shdr *'}
  193 | static int klp_resolve_symbols(Elf64_Shdr *sechdrs, const char *strtab,
      |                                ~~~~~~~~~~~~^~~~~~~

Fix it by using the right types instead of forcing 64 bits types.

Fixes: 7c8e2bdd5f0d ("livepatch: Apply vmlinux-specific KLP relocations early")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Petr Mladek <pmladek@suse.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5288e11b018a762ea3351cc8fb2d4f15093a4457.1640017960.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

scripts/dtc: Call pkg-config POSIXly correct

[ Upstream commit a8b309ce9760943486e0585285e0125588a31650 ]

Running with POSIXLY_CORRECT=1 in the environment the scripts/dtc build
fails, because pkg-config doesn't output anything when the flags come
after the arguments.

Fixes: 067c650c456e ("dtc: Use pkg-config to locate libyaml")
Signed-off-by: Thomas Bracht Laumann Jespersen <t@laumann.xyz>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220131112028.7907-1-t@laumann.xyz
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: limit bandwidth in HE capabilities

[ Upstream commit 1f2c104448477512fcf7296df54bfbc3a6f9a765 ]

If we're limiting bandwidth for some reason such as regulatory
restrictions, then advertise that limitation just like we do
for VHT today, so the AP is aware we cannot use the higher BW
it might be using.

Fixes: 41cbb0f5a295 ("mac80211: add support for HE")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220202104617.70c8e3e7ee76.If317630de69ff1146bec7d47f5b83038695eb71d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: Remove a couple of obsolete TODO

[ Upstream commit cee04f3c3a00ffd2a2a6ed1028e0ab58a3a28d25 ]

The HE capability IE is an extension IE so remove
an irrelevant comments.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211129152938.550b95b5fca7.Ia31395e880172aefcc0a8c70ed060f84b94bdb83@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: mv88e6xxx: Enable port policy support on 6097

[ Upstream commit 585d42bb57bb358d48906660a8de273b078810b1 ]

This chip has support for the same per-port policy actions found in
later versions of LinkStreet devices.

Fixes: f3a2cd326e44 ("net: dsa: mv88e6xxx: introduce .port_set_policy")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ptp: unregister virtual clocks when unregistering physical clock.

[ Upstream commit bfcbb76b0f595ea9ede9f7a218086fef85242f10 ]

When unregistering a physical clock which has some virtual clocks,
unregister the virtual clocks with it.

This fixes the following oops, which can be triggered by unloading
a driver providing a PTP clock when it has enabled virtual clocks:

BUG: unable to handle page fault for address: ffffffffc04fc4d8
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:ptp_vclock_read+0x31/0xb0
Call Trace:
 timecounter_read+0xf/0x50
 ptp_vclock_refresh+0x2c/0x50
 ? ptp_clock_release+0x40/0x40
 ptp_aux_kworker+0x17/0x30
 kthread_worker_fn+0x9b/0x240
 ? kthread_should_park+0x30/0x30
 kthread+0xe2/0x110
 ? kthread_complete_and_exit+0x20/0x20
 ret_from_fork+0x22/0x30

Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7615: check sta_rates pointer in mt7615_sta_rate_tbl_update

[ Upstream commit 6a6f457ed5fdf6777536c20644a9e42128a50ec2 ]

Check sta_rates pointer value in mt7615_sta_rate_tbl_update routine
since minstrel_ht_update_rates can fail allocating rates array.

Fixes: 04b8e65922f63 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7603: check sta_rates pointer in mt7603_sta_rate_tbl_update

[ Upstream commit fc8e2c707ce11c8ec2e992885b0d53a5e04031ac ]

Check sta_rates pointer value in mt7603_sta_rate_tbl_update routine
since minstrel_ht_update_rates can fail allocating rates array.

Fixes: c8846e1015022 ("mt76: add driver for MT7603E and MT7628/7688")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7615: fix a leftover race in runtime-pm

[ Upstream commit 42ce8d3b623162f3248db50a38359f294e6b06fd ]

Fix a possible race in mt7615_pm_power_save_work() if rx/tx napi
schedules ps_work and we are currently accessing device register
on a different cpu.

Fixes: db928f1ab9789 ("mt76: mt7663: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx/rx napi")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7921: fix a leftover race in runtime-pm

[ Upstream commit 591cdccebdd4d02eb46d400dea911136400cc567 ]

Fix a possible race in mt7921_pm_power_save_work() if rx/tx napi
schedules ps_work and we are currently accessing device register
on a different cpu.

Fixes: 1d8efc741df8 ("mt76: mt7921: introduce Runtime PM support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7915: use proper aid value in mt7915_mcu_sta_basic_tlv

[ Upstream commit abdb8bc94be4cf68aa71c9a8ee0bad9b3e6f52d3 ]

Similar to mt7915_mcu_wtbl_generic_tlv, rely on vif->bss_conf.aid for
aid in sta mode and not on sta->aid.

Fixes: e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: mt7915: use proper aid value in mt7915_mcu_wtbl_generic_tlv in sta mode

[ Upstream commit a56b1b0f145ef2d6bb9312dedf3ab8558ef50a5b ]

mac80211 provides aid in vif->bss_conf.aid for sta mode and not in
sta->aid. Fix mt7915_mcu_wtbl_generic_tlv routine using proper value for
aid in sta mode.

Fixes: e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mt76: connac: fix sta_rec_wtbl tag len

[ Upstream commit 74c337ec0905d99111fc63a15f2e0784b9ed5503 ]

Similar to mt7915 driver, fix tag len error for sta_rec_wtbl, which
causes fw parsing error for the tags placed behind it.

Fixes: d0e274af2f2e4 ("mt76: mt76_connac: create mcu library")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/perf: Don't use perf_hw_context for trace IMC PMU

[ Upstream commit 0198322379c25215b2778482bf1221743a76e2b5 ]

Trace IMC (In-Memory collection counters) in powerpc is useful for
application level profiling.

For trace_imc, presently task context (task_ctx_nr) is set to
perf_hw_context. But perf_hw_context should only be used for CPU PMU.
See commit 26657848502b ("perf/core: Verify we have a single
perf_hw_context PMU").

So for trace_imc, even though it is per thread PMU, it is preferred to
use sw_context in order to be able to do application level monitoring.
Hence change the task_ctx_nr to use perf_sw_context.

Fixes: 012ae244845f ("powerpc/perf: Trace imc PMU functions")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Update subject & incorporate notes into change log, reflow comment]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220202041837.65968-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Book3S HV: Check return value of kvmppc_radix_init

[ Upstream commit 69ab6ac380a00244575de02c406dcb9491bf3368 ]

The return of the function is being shadowed by the call to
kvmppc_uvmem_init.

Fixes: ca9f4942670c ("KVM: PPC: Book3S HV: Support for running secure guests")
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220125155735.1018683-2-farosas@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch

[ Upstream commit 5ebb74749202a25da4b3cc2eb15470225a05527c ]

On board rev A, the network interface labels for the switch ports
written on the front panel are different than on rev B and later.

This patch fixes network interface names for the switch ports according
to labels that are written on the front panel of the board rev B.
They start from ETH3 and end at ETH10.

This patch also introduces a separate device tree for rev A.
The main device tree is supposed to cover rev B and later.

Fixes: e69eb0824d8c ("powerpc: dts: t1040rdb: add ports for Seville Ethernet switch")
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220121091447.3412907-1-bigunclemax@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ray_cs: Check ioremap return value

[ Upstream commit 7e4760713391ee46dc913194b33ae234389a174e ]

As the possible failure of the ioremap(), the 'local->sram' and other
two could be NULL.
Therefore it should be better to check it in order to avoid the later
dev_dbg.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211230022926.1846757-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: reset: gemini-poweroff: Fix IRQ check in gemini_poweroff_probe

[ Upstream commit ba18dad0fb880cd29aa97b6b75560ef14d1061ba ]

platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:

    int irq = platform_get_irq(pdev, 0);
    if (irq < 0)
        return irq;

Fix the check of return value to catch errors correctly.

Fixes: f7a388d6cd1c ("power: reset: Add a driver for the Gemini poweroff")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: respect metadata on XSK Rx to skb

[ Upstream commit f322a620be69e95594eda89502b478aa7dbf6ec2 ]

For now, if the XDP prog returns XDP_PASS on XSK, the metadata
will be lost as it doesn't get copied to the skb.

Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.

net_prefetch() xdp->data_meta and align the copy size to speed-up
memcpy() a little and better match ixgbe_construct_skb().

Fixes: d0bcacd0a130 ("ixgbe: add AF_XDP zero-copy Rx support")
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb

[ Upstream commit 8f405221a73a53234486c185d8ef647377a53cc6 ]

{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, ixgbe_construct_skb_zc() currently allocates and reserves
additional `xdp->data - xdp->data_hard_start`, which is
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only to __napi_alloc_skb() and
don't reserve anything. This will give enough headroom for stack
processing.

Fixes: d0bcacd0a130 ("ixgbe: add AF_XDP zero-copy Rx support")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: pass bi->xdp to ixgbe_construct_skb_zc() directly

[ Upstream commit 1fbdaa13386804a31eefd3db3c5fe00e80ce9bc3 ]

To not dereference bi->xdp each time in ixgbe_construct_skb_zc(),
pass bi->xdp as an argument instead of bi. We can also call
xsk_buff_free() outside of the function as well as assign bi->xdp
to NULL, which seems to make it closer to its name.

Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb

[ Upstream commit f9e61d365bafdee40fe2586fc6be490c3e824dad ]

{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, igc_construct_skb_zc() currently allocates and reserves
additional `xdp->data_meta - xdp->data_hard_start`, which is about
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only (+ meta) to
__napi_alloc_skb() and don't reserve anything. This will give
enough headroom for stack processing.
Also, net_prefetch() xdp->data_meta and align the copy size to
speed-up memcpy() a little and better match igc_construct_skb().

Fixes: fc9df2a0b520 ("igc: Enable RX via AF_XDP zero-copy")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: respect metadata on XSK Rx to skb

[ Upstream commit 6dba29537c0f639b482bd8f8bbd50ab4ae74b48d ]

For now, if the XDP prog returns XDP_PASS on XSK, the metadata will
be lost as it doesn't get copied to the skb.

Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.

net_prefetch() xdp->data_meta and align the copy size to speed-up
memcpy() a little and better match i40e_construct_skb().

Fixes: 0a714186d3c0 ("i40e: add AF_XDP zero-copy Rx support")
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb

[ Upstream commit bc97f9c6f988b31b728eb47a94ca825401dbeffe ]

{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, i40e_construct_skb_zc() currently allocates and reserves
additional `xdp->data - xdp->data_hard_start`, which is
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only to __napi_alloc_skb() and
don't reserve anything. This will give enough headroom for stack
processing.

Fixes: 0a714186d3c0 ("i40e: add AF_XDP zero-copy Rx support")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/net: timestamping: Fix bind_phc check

[ Upstream commit 678dfd5280341d877ca646499bfdc82a3d8b4356 ]

timestamping checks socket options during initialisation. For the field
bind_phc of the socket option SO_TIMESTAMPING it expects the value -1 if
PHC is not bound. Actually the value of bind_phc is 0 if PHC is not
bound. This results in the following output:

SIOCSHWTSTAMP: tx_type 0 requested, got 0; rx_filter 0 requested, got 0
SO_TIMESTAMP 0
SO_TIMESTAMPNS 0
SO_TIMESTAMPING flags 0, bind phc 0
   not expected, flags 0, bind phc -1

This is fixed by setting default value and expected value of bind_phc to
0.

Fixes: 2214d7032479 ("selftests/net: timestamping: support binding PHC")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Fix vmx/vsx mixup in mmio emulation

[ Upstream commit b99234b918c6e36b9aa0a5b2981e86b6bd11f8e2 ]

The MMIO emulation code for vector instructions is duplicated between
VSX and VMX. When emulating VMX we should check the VMX copy size
instead of the VSX one.

Fixes: acc9eb9305fe ("KVM: PPC: Reimplement LOAD_VMX/STORE_VMX instruction ...")
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220125215655.1026224-3-farosas@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/core: Set MR type in ib_reg_user_mr

[ Upstream commit 32a88d16615c2be295571c29273c4ac94cb75309 ]

Add missing assignment of MR type to IB_MR_TYPE_USER.

Fixes: 33006bd4f37f ("IB/core: Introduce ib_reg_user_mr")
Link: https://lore.kernel.org/r/be2e91bcd6e52dc36be289ae92f30d3a5cc6dcb1.1642491047.git.leonro@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k_htc: fix uninit value bugs

[ Upstream commit d1e0df1c57bd30871dd1c855742a7c346dbca853 ]

Syzbot reported 2 KMSAN bugs in ath9k. All of them are caused by missing
field initialization.

In htc_connect_service() svc_meta_len and pad are not initialized. Based
on code it looks like in current skb there is no service data, so simply
initialize svc_meta_len to 0.

htc_issue_send() does not initialize htc_frame_hdr::control array. Based
on firmware code, it will initialize it by itself, so simply zero whole
array to make KMSAN happy

Fail logs:

BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
 usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
 hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline]
 hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479
 htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline]
 htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275
...

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:524 [inline]
 slab_alloc_node mm/slub.c:3251 [inline]
 __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
 kmalloc_reserve net/core/skbuff.c:354 [inline]
 __alloc_skb+0x545/0xf90 net/core/skbuff.c:426
 alloc_skb include/linux/skbuff.h:1126 [inline]
 htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258
...

Bytes 4-7 of 18 are uninitialized
Memory access of size 18 starts at ffff888027377e00

BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
 usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
 hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline]
 hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479
 htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline]
 htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275
...

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:524 [inline]
 slab_alloc_node mm/slub.c:3251 [inline]
 __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
 kmalloc_reserve net/core/skbuff.c:354 [inline]
 __alloc_skb+0x545/0xf90 net/core/skbuff.c:426
 alloc_skb include/linux/skbuff.h:1126 [inline]
 htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258
...

Bytes 16-17 of 18 are uninitialized
Memory access of size 18 starts at ffff888027377e00

Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Reported-by: syzbot+f83a1df1ed4f67e8d8ad@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220115122733.11160-1-paskripkin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf/test_xdp_redirect_multi: use temp netns for testing

[ Upstream commit cec74489a8dee93053340ec88ea938ff4008c3c0 ]

Use temp netns instead of hard code name for testing in case the netns
already exists.

Remove the hard code interface index when creating the veth interfaces.
Because when the system loads some virtual interface modules, e.g. tunnels.
the ifindex of 2 will be used and the cmd will fail.

As the netns has not created if checking environment failed. Trap the
clean up function after checking env.

Fixes: 8955c1a32987 ("selftests/bpf/xdp_redirect_multi: Limit the tests in netns")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Link: https://lore.kernel.org/r/20220125081717.1260849-2-liuhangbin@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Normalize XDP section names in selftests

[ Upstream commit 8fffa0e3451abdd84e4b4e427f7e66040eb24f43 ]

Convert almost all SEC("xdp_blah") uses to strict SEC("xdp") to comply
with strict libbpf 1.0 logic of exact section name match for XDP program
types. There is only one exception, which is only tested through
iproute2 and defines multiple XDP programs within the same BPF object.
Given iproute2 still works in non-strict libbpf mode and it doesn't have
means to specify XDP programs by its name (not section name/title),
leave that single file alone for now until iproute2 gains lookup by
function/program name.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20210928161946.2512801-3-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: at803x: move page selection fix to config_init

[ Upstream commit 4f3a00c7f5b2cfe4e127fd3fe49b55e1b318c01f ]

The fix to select the copper page on AR8031 was being done in the probe
function rather than config_init, so it would not be redone after resume
from suspend. Move this to config_init so it is always redone when
needed.

Fixes: c329e5afb42f ("net: phy: at803x: select correct page on config init")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm: return -ENOTSUPP if there is no get_dpm_ultimate_freq function

[ Upstream commit 430e6a0212b2a0eb1de5e9d47a016fa79edf3978 ]

clang static analysis reports this represenative problem
amdgpu_smu.c:144:18: warning: The left operand of '*' is a garbage value
        return clk_freq * 100;
               ~~~~~~~~ ^

If there is no get_dpm_ultimate_freq function,
smu_get_dpm_freq_range returns success without setting the
output min,max parameters.  So return an -ENOTSUPP error.

Fixes: e5ef784b1e17 ("drm/amd/powerplay: revise calling chain on retrieving frequency range")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fix a NULL pointer dereference in amdgpu_dm_connector_add_common_modes()

[ Upstream commit 588a70177df3b1777484267584ef38ab2ca899a2 ]

In amdgpu_dm_connector_add_common_modes(), amdgpu_dm_create_common_mode()
is assigned to mode and is passed to drm_mode_probed_add() directly after
that. drm_mode_probed_add() passes &mode->head to list_add_tail(), and
there is a dereference of it in list_add_tail() without recoveries, which
could lead to NULL pointer dereference on failure of
amdgpu_dm_create_common_mode().

Fix this by adding a NULL check of mode.

This bug was found by a static analyzer.

Builds with 'make allyesconfig' show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: e7b07ceef2a6 ("drm/amd/display: Merge amdgpu_dm_types and amdgpu_dm")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/acr: Fix undefined behavior in nvkm_acr_hsfw_load_bl()

[ Upstream commit 2343bcdb4747d4f418a4daf2e898b94f86c24a59 ]

In nvkm_acr_hsfw_load_bl(), the return value of kmalloc() is directly
passed to memcpy(), which could lead to undefined behavior on failure
of kmalloc().

Fix this bug by using kmemdup() instead of kmalloc()+memcpy().

This bug was found by a static analyzer.

Builds with 'make allyesconfig' show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: 22dcda45a3d1 ("drm/nouveau/acr: implement new subdev to replace "secure boot"")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220124165856.57022-1-zhou1615@umn.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: Don't send reset commands if FW isn't running

[ Upstream commit b8fd0271dad00b953caaabe73474788d3d19e252 ]

It's possible the FW is already shutting down while the driver is being
removed and/or when the driver is going through reset. This can cause
unexpected/unnecessary errors to be printed:

eth0: DEV_CMD IONIC_CMD_PORT_RESET (12) error, IONIC_RC_ERROR (29) failed
eth1: DEV_CMD IONIC_CMD_RESET (3) error, IONIC_RC_ERROR (29) failed

Fix this by checking the FW status register before issuing the reset
commands.

Also, since err may not be assigned in ionic_port_reset(), assign it a
default value of 0, and remove an unnecessary log message.

Fixes: fbfb8031533c ("ionic: Add hardware init and device commands")
Signed-off-by: Brett Creeley <brett@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: start watchdog after all is setup

[ Upstream commit 9ad2939a1525962a79a2fd974ec7e3a71455b964 ]

The watchdog expects the lif to fully exist when it goes off,
so lets not start the watchdog until all is ready in case there
is some quirky time dialation that makes probe take multiple
seconds.

Fixes: 089406bc5ad6 ("ionic: add a watchdog timer to monitor heartbeat")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ionic: fix type complaint in ionic_dev_cmd_clean()

[ Upstream commit bc0bf9de6f48268f4ee59e57fb42ac751be3ecda ]

Sparse seems to have gotten a little more picky lately and
we need to revisit this bit of code to make sparse happy.

warning: incorrect type in initializer (different address spaces)
   expected union ionic_dev_cmd_regs *regs
   got union ionic_dev_cmd_regs [noderef] __iomem *dev_cmd_regs
warning: incorrect type in argument 2 (different address spaces)
   expected void [noderef] __iomem *
   got unsigned int *
warning: incorrect type in argument 1 (different address spaces)
   expected void volatile [noderef] __iomem *
   got union ionic_dev_cmd *

Fixes: d701ec326a31 ("ionic: clean up sparse complaints")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/edid: Split deep color modes between RGB and YUV444

[ Upstream commit 4adc33f36d80489339f1b43dfeee96bb9ea8e459 ]

The current code assumes that the RGB444 and YUV444 formats are the
same, but the HDMI 2.0 specification states that:

   The three DC_XXbit bits above only indicate support for RGB 4:4:4 at
   that pixel size. Support for YCBCR 4:4:4 in Deep Color modes is
   indicated with the DC_Y444 bit. If DC_Y444 is set, then YCBCR 4:4:4
   is supported for all modes indicated by the DC_XXbit flags.

So if we have YUV444 support and any DC_XXbit flag set but the DC_Y444
flag isn't, we'll assume that we support that deep colour mode for
YUV444 which breaks the specification.

In order to fix this, let's split the edid_hdmi_dc_modes field in struct
drm_display_info into two fields, one for RGB444 and one for YUV444.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: d0c94692e0a3 ("drm/edid: Parse and handle HDMI deep color modes.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-4-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/edid: Don't clear formats if using deep color

[ Upstream commit 75478b3b393bcbdca4e6da76fe3a9f1a4133ec5d ]

The current code, when parsing the EDID Deep Color depths, that the
YUV422 cannot be used, referring to the HDMI 1.3 Specification.

This specification, in its section 6.2.4, indeed states:

  For each supported Deep Color mode, RGB 4:4:4 shall be supported and
  optionally YCBCR 4:4:4 may be supported.

  YCBCR 4:2:2 is not permitted for any Deep Color mode.

This indeed can be interpreted like the code does, but the HDMI 1.4
specification further clarifies that statement in its section 6.2.4:

  For each supported Deep Color mode, RGB 4:4:4 shall be supported and
  optionally YCBCR 4:4:4 may be supported.

  YCBCR 4:2:2 is also 36-bit mode but does not require the further use
  of the Deep Color modes described in section 6.5.2 and 6.5.3.

This means that, even though YUV422 can be used with 12 bit per color,
it shouldn't be treated as a deep color mode.

This is also broken with YUV444 if it's supported by the display, but
DRM_EDID_HDMI_DC_Y444 isn't set. In such a case, the code will clear
color_formats of the YUV444 support set previously in
drm_parse_cea_ext(), but will not set it back.

Since the formats supported are already setup properly in
drm_parse_cea_ext(), let's just remove the code modifying the formats in
drm_parse_hdmi_deep_color_info()

Fixes: d0c94692e0a3 ("drm/edid: Parse and handle HDMI deep color modes.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-3-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: gpmi: fix controller timings setting

[ Upstream commit 2970bf5a32f079e1e9197411db4fe9faccb1503a ]

Set the controller registers according to the real clock rate. The
controller registers configuration (setup, hold, timeout, ... cycles)
depends on the clock rate of the GPMI. Using the real rate instead of
the ideal one, avoids that this inaccuracy (required_rate - real_rate)
affects the registers setting.

This patch has been tested on two custom boards with i.MX28 and i.MX6
SOCs:
- i.MX28:
  required rate 100MHz, real rate 99.3MHz
- i.MX6
  required rate 100MHz, real rate 99MHz

Fixes: b1206122069a ("mtd: rawnand: gpmi: use core timings instead of an empirical derivation")
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220118095434.35081-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: onenand: Check for error irq

[ Upstream commit 3e68f331c8c759c0daa31cc92c3449b23119a215 ]

For the possible failure of the platform_get_irq(), the returned irq
could be error number and will finally cause the failure of the
request_irq().
Consider that platform_get_irq() can now in certain cases return
-EPROBE_DEFER, and the consequences of letting request_irq() effectively
convert that into -EINVAL, even at probe time rather than later on.
So it might be better to check just now.

Fixes: 2c22120fbd01 ("MTD: OneNAND: interrupt based wait support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220104162658.1988142-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_serdev: call init_rwsem() before p->open()

[ Upstream commit 9d7cbe2b9cf5f650067df4f402fdd799d4bbb4e1 ]

kvartet reported, that hci_uart_tx_wakeup() uses uninitialized rwsem.
The problem was in wrong place for percpu_init_rwsem() call.

hci_uart_proto::open() may register a timer whose callback may call
hci_uart_tx_wakeup(). There is a chance, that hci_uart_register_device()
thread won't be fast enough to call percpu_init_rwsem().

Fix it my moving percpu_init_rwsem() call before p->open().

INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 2 PID: 18524 Comm: syz-executor.5 Not tainted 5.16.0-rc6 #9
...
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 assign_lock_key kernel/locking/lockdep.c:951 [inline]
 register_lock_class+0x148d/0x1950 kernel/locking/lockdep.c:1263
 __lock_acquire+0x106/0x57e0 kernel/locking/lockdep.c:4906
 lock_acquire kernel/locking/lockdep.c:5637 [inline]
 lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5602
 percpu_down_read_trylock include/linux/percpu-rwsem.h:92 [inline]
 hci_uart_tx_wakeup+0x12e/0x490 drivers/bluetooth/hci_ldisc.c:124
 h5_timed_event+0x32f/0x6a0 drivers/bluetooth/hci_h5.c:188
 call_timer_fn+0x1a5/0x6b0 kernel/time/timer.c:1421

Fixes: d73e17281665 ("Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops")
Reported-by: Yiru Xu <xyru1999@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btintel: Fix WBS setting for Intel legacy ROM products

[ Upstream commit 55235304c2560d4a94ccfff2a47ea927b4114064 ]

This patch adds the flag to identify the Intel legacy ROM products that
don't support WBS like WP and StP.

Fixes: 3df4dfbec0f29 ("Bluetooth: btintel: Move hci quirks to setup routine")
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: bpf: Fix bind on used port

[ Upstream commit 8c0be0631d81e48f77d0ebf0534c86e32bef5f89 ]

The bind_perm BPF selftest failed when port 111/tcp was already in use
during the test. To fix this, the test now runs in its own network name
space.

To use unshare, it is necessary to reorder the includes. The style of
the includes is adapted to be consistent with the other prog_tests.

v2: Replace deprecated CHECK macro with ASSERT_OK

Fixes: 8259fdeb30326 ("selftests/bpf: Verify that rebinding to port < 1024 from BPF works")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/551ee65533bb987a43f93d88eaf2368b416ccd32.1642518457.git.fmaurer@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/selftests/test-drm_dp_mst_helper: Fix memory leak in sideband_msg_req_encode_decode

[ Upstream commit ba3a5ddcf1e5df31f2291006d5297ca62035584f ]

Avoid leaking the "out" variable if it is not possible to allocate
the "txmsg" variable.

Fixes: 09234b88ef55 ("drm/selftests/test-drm_dp_mst_helper: Move 'sideband_msg_req_encode_decode' onto the heap")
Addresses-Coverity-ID: 1475685 ("Resource leak")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220108165812.46797-1-jose.exposito89@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix UAF due to race between btf_try_get_module and load_module

[ Upstream commit 18688de203b47e5d8d9d0953385bf30b5949324f ]

While working on code to populate kfunc BTF ID sets for module BTF from
its initcall, I noticed that by the time the initcall is invoked, the
module BTF can already be seen by userspace (and the BPF verifier). The
existing btf_try_get_module calls try_module_get which only fails if
mod->state == MODULE_STATE_GOING, i.e. it can increment module reference
when module initcall is happening in parallel.

Currently, BTF parsing happens from MODULE_STATE_COMING notifier
callback. At this point, the module initcalls have not been invoked.
The notifier callback parses and prepares the module BTF, allocates an
ID, which publishes it to userspace, and then adds it to the btf_modules
list allowing the kernel to invoke btf_try_get_module for the BTF.

However, at this point, the module has not been fully initialized (i.e.
its initcalls have not finished). The code in module.c can still fail
and free the module, without caring for other users. However, nothing
stops btf_try_get_module from succeeding between the state transition
from MODULE_STATE_COMING to MODULE_STATE_LIVE.

This leads to a use-after-free issue when BPF program loads
successfully in the state transition, load_module's do_init_module call
fails and frees the module, and BPF program fd on close calls module_put
for the freed module. Future patch has test case to verify we don't
regress in this area in future.

There are multiple points after prepare_coming_module (in load_module)
where failure can occur and module loading can return error. We
illustrate and test for the race using the last point where it can
practically occur (in module __init function).

An illustration of the race:

CPU 0                           CPU 1
  load_module
    notifier_call(MODULE_STATE_COMING)
      btf_parse_module
      btf_alloc_id // Published to userspace
      list_add(&btf_mod->list, btf_modules)
    mod->init(...)
... ^
bpf_check         |
check_pseudo_btf_id             |
  btf_try_get_module            |
    returns true                |  ...
...                             |  module __init in progress
return prog_fd                  |  ...
...                             V
    if (ret < 0)
      free_module(mod)
    ...
close(prog_fd)
 ...
 bpf_prog_free_deferred
  module_put(used_btf.mod) // use-after-free

We fix this issue by setting a flag BTF_MODULE_F_LIVE, from the notifier
callback when MODULE_STATE_LIVE state is reached for the module, so that
we return NULL from btf_try_get_module for modules that are not fully
formed. Since try_module_get already checks that module is not in
MODULE_STATE_GOING state, and that is the only transition a live module
can make before being removed from btf_modules list, this is enough to
close the race and prevent the bug.

A later selftest patch crafts the race condition artifically to verify
that it has been fixed, and that verifier fails to load program (with
ENXIO).

Lastly, a couple of comments:

 1. Even if this race didn't exist, it seems more appropriate to only
    access resources (ksyms and kfuncs) of a fully formed module which
    has been initialized completely.

 2. This patch was born out of need for synchronization against module
    initcall for the next patch, so it is needed for correctness even
    without the aforementioned race condition. The BTF resources
    initialized by module initcall are set up once and then only looked
    up, so just waiting until the initcall has finished ensures correct
    behavior.

Fixes: 541c3bad8dc5 ("bpf: Support BPF ksym variables in kernel modules")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220114163953.1455836-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

udmabuf: validate ubuf->pagecount

[ Upstream commit 2b6dd600dd72573c23ea180b5b0b2f1813405882 ]

Syzbot has reported GPF in sg_alloc_append_table_from_pages(). The
problem was in ubuf->pages == ZERO_PTR.

ubuf->pagecount is calculated from arguments passed from user-space. If
user creates udmabuf with list.size == 0 then ubuf->pagecount will be
also equal to zero; it causes kmalloc_array() to return ZERO_PTR.

Fix it by validating ubuf->pagecount before passing it to
kmalloc_array().

Fixes: fbb0de795078 ("Add udmabuf misc device")
Reported-and-tested-by: syzbot+2c56b725ec547fa9cb29@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20211230142649.23022-1-paskripkin@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpftool: Only set obj->skeleton on complete success

[ Upstream commit 0991f6a38f576aa9a5e34713e23c998a3310d4d0 ]

After `bpftool gen skeleton`, the ${bpf_app}.skel.h will provide that
${bpf_app_name}__open helper to load bpf. If there is some error
like ENOMEM, the ${bpf_app_name}__open will rollback(free) the allocated
object, including `bpf_object_skeleton`.

Since the ${bpf_app_name}__create_skeleton set the obj->skeleton first
and not rollback it when error, it will cause double-free in
${bpf_app_name}__destory at ${bpf_app_name}__open. Therefore, we should
set the obj->skeleton before return 0;

Fixes: 5dc7a8b21144 ("bpftool, selftests/bpf: Embed object file inside skeleton")
Signed-off-by: Wei Fu <fuweid89@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220108084008.1053111-1-fuweid89@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix possible NULL pointer dereference when destroying skeleton

[ Upstream commit a32ea51a3f17ce6524c9fc19d311e708331c8b5f ]

When I checked the code in skeleton header file generated with my own
bpf prog, I found there may be possible NULL pointer dereference when
destroying skeleton. Then I checked the in-tree bpf progs, finding that is
a common issue. Let's take the generated samples/bpf/xdp_redirect_cpu.skel.h
for example. Below is the generated code in
xdp_redirect_cpu__create_skeleton():

xdp_redirect_cpu__create_skeleton
struct bpf_object_skeleton *s;
s = (struct bpf_object_skeleton *)calloc(1, sizeof(*s));
if (!s)
goto error;
...
error:
bpf_object__destroy_skeleton(s);
return  -ENOMEM;

After goto error, the NULL 's' will be deferenced in
bpf_object__destroy_skeleton().

We can simply fix this issue by just adding a NULL check in
bpf_object__destroy_skeleton().

Fixes: d66562fba1ce ("libbpf: Add BPF object skeleton support")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220108134739.32541-1-laoar.shao@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panfrost: Check for error num after setting mask

[ Upstream commit 44ab30b056149bd59dd7989a593dd25ead6007fd ]

Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.

Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[Steve: fix Fixes: line]
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220106030326.2620942-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/v3d/v3d_drv: Check for error num after setting mask

[ Upstream commit 4a39156166b90465da0f9a33b3442d63b5651bec ]

Because of the possible failure of the dma_supported(), the
dma_set_mask_and_coherent() may return error num.
Therefore, it should be better to check it and return the error if
fails.
Also, we can create a variable for the mask to solve the
alignment issue.

Fixes: 334dd38a3878 ("drm/v3d: Set dma_mask as well as coherent_dma_mask")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220110013807.4105270-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: fix memory overwrite of the WoWLAN wakeup packet pattern

[ Upstream commit e3fb3d4418fce5484dfe7995fcd94c18b10a431a ]

In function ath10k_wow_convert_8023_to_80211(), it will do memcpy for
the new->pattern, and currently the new->pattern and new->mask is same
with the old, then the memcpy of new->pattern will also overwrite the
old->pattern, because the header format of new->pattern is 802.11,
its length is larger than the old->pattern which is 802.3. Then the
operation of "Copy frame body" will copy a mistake value because the
body memory has been overwrite when memcpy the new->pattern.

Assign another empty value to new_pattern to avoid the overwrite issue.

Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049

Fixes: fa3440fa2fa1 ("ath10k: convert wow pattern from 802.3 to 802.11")
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211222031347.25463-1-quic_wgong@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: bridge: adv7511: Fix ADV7535 HPD enablement

[ Upstream commit 3dbc84a595d17f64f14fcea00120d31e33e98880 ]

Existing HPD enablement logic is not compatible with ADV7535
bridge, thus any runtime plug-in of HDMI cable is not working
on these bridge designs.

Unlike other ADV7511 family of bridges, the ADV7535 require
HPD_OVERRIDE bit to set and reset for proper handling of HPD
functionality.

Fix it.

Fixes: 8501fe4b14a3 ("drm: bridge: adv7511: Add support for ADV7535")
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220109172949.168167-1-jagan@amarulasolutions.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: nwl-dsi: Fix PM disable depth imbalance in nwl_dsi_probe

[ Upstream commit b146e343a9e05605b491b1bf4a2b62a39d5638d8 ]

The pm_runtime_enable will increase power disable depth.
Thus a pairing decrement is needed on the error handling
path to keep it balanced according to context.

Fixes: 44cfc6233447 ("drm/bridge: Add NWL MIPI DSI host controller support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220105104826.1418-1-linmq006@gmail.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: Add missing pm_runtime_disable() in __dw_mipi_dsi_probe

[ Upstream commit 96211b7c56b109a52768e6cc5e23a1f79316eca0 ]

If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Add missing pm_runtime_disable() for __dw_mipi_dsi_probe.

Fixes: 46fc51546d44 ("drm/bridge/synopsys: Add MIPI DSI host controller bridge")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220105104113.31415-1-linmq006@gmail.com
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: Fix free wrong object in sii8620_init_rcp_input_dev

[ Upstream commit 7c442e76c06cb1bef16a6c523487438175584eea ]

rc_dev is allocated by rc_allocate_device(), and doesn't assigned to
ctx->rc_dev before calling  rc_free_device(ctx->rc_dev).
So it should call rc_free_device(rc_dev);

Fixes: e25f1f7c94e1 ("drm/bridge/sii8620: add remote control support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211227092522.21755-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/meson: Fix error handling when afbcd.ops->init fails

[ Upstream commit fa747d75f65d1b1cbc3f4691fa67b695e8a399c8 ]

When afbcd.ops->init fails we need to free the struct drm_device. Also
all errors which come after afbcd.ops->init was successful need to exit
the AFBCD, just like meson_drv_unbind() does.

Fixes: d1b5e41e13a7e9 ("drm/meson: Add AFBCD module driver")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211230235515.1627522-3-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/meson: split out encoder from meson_dw_hdmi

[ Upstream commit e67f6037ae1be34b2b686bab72caa41d57714534 ]

This moves all the non-DW-HDMI code where it should be:
an encoder in the drm/meson core driver.

The bridge functions are copied as-is, except:
- the encoder init uses the simple kms helper
- the mode_set has been moved to atomic_enable()
- debug prints are converted to dev_debg()

For now the bridge attach flags is 0, DRM_BRIDGE_ATTACH_NO_CONNECTOR
will be handled later.

The meson dw-hdmi glue is slightly fixed to live without the
encoder in the same driver.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[narmstrong: fixed warning because missing meson_encoder_hdmi.h include]
Link: https://patchwork.freedesktop.org/patch/msgid/20211020123947.2585572-4-narmstrong@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/meson: Make use of the helper function devm_platform_ioremap_resourcexxx()

[ Upstream commit d4cb82aa2e4bc0e46582a625cb41b64c83fdde49 ]

Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately

Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately

Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831135644.4576-1-caihuoqing@baidu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/meson: osd_afbcd: Add an exit callback to struct meson_afbcd_ops

[ Upstream commit 04b8a5d9cfd171f65df75f444b5617a372649edd ]

Use this to simplify the driver shutdown. It will also come handy when
fixing the error handling in meson_drv_bind_master().

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Fixes: d1b5e41e13a7e9 ("drm/meson: Add AFBCD module driver")
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211230235515.1627522-2-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: configs: multi_v5_defconfig: re-enable DRM_PANEL and FB_xxx

[ Upstream commit 9c44d0805f949c56121b4ae6949fb064537bf198 ]

Commit 91185d55b32e ("drm: Remove DRM_KMS_FB_HELPER Kconfig option")
led to de-selection of CONFIG_FB, which was a prerequisite for
BACKLIGHT_CLASS_DEVICE, which CONFIG_DRM_PANEL_SIMPLE depended on.
Explicitly set CONFIG_FB, to bring DRM_PANEL_SIMPLE, DRM_PANEL_EDP,
FB_IMX and FB_ATMEL back into the generated .config.
This also adds some new FB related features like fonts and the
framebuffer console.

See also commit 8c1768967e27 ("ARM: config: mutli v7: Reenable FB
dependency"), which solved the same problem for multi_v7_defconfig.

This relies on [1], to fix a broken Kconfig dependency.

[1] https://lore.kernel.org/dri-devel/20220315084559.23510-1-tzimmermann@suse.de/raw

Fixes: 91185d55b32e ("drm: Remove DRM_KMS_FB_HELPER Kconfig option")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20220317183043.948432-4-andre.przywara@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: configs: multi_v5_defconfig: re-enable CONFIG_V4L_PLATFORM_DRIVERS

[ Upstream commit f5eb04d7a0e419d61f784de3ced708259ddb71d7 ]

Commit 06b93644f4d1 ("media: Kconfig: add an option to filter in/out
platform drivers") introduced CONFIG_MEDIA_PLATFORM_SUPPORT, to allow
more fine grained control over the inclusion of certain Kconfig files.
multi_v5_defconfig was selecting some drivers described in
drivers/media/platform/Kconfig, which now wasn't included anymore.

Explicitly set the new symbol in multi_v5_defconfig to bring those
drivers back.
This enables some new V4L2 and VIDEOBUF2 features, but as modules only.

Fixes: 06b93644f4d1 ("media: Kconfig: add an option to filter in/out platform drivers")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20220317183043.948432-3-andre.przywara@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: amd: Fix reference to PCM buffer address

[ Upstream commit 54e1bf9f6177a3ffbd920474f4481a25361163aa ]

PCM buffers might be allocated dynamically when the buffer
preallocation failed or a larger buffer is requested, and it's not
guaranteed that substream->dma_buffer points to the actually used
buffer.  The driver needs to refer to substream->runtime->dma_addr
instead for the buffer address.

Fixes: cab396d8b22c1 ("ASoC: amd: add ACP5x pcm dma driver ops")
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220316091303.9745-1-tangmeng@uniontech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: codecs: wcd934x: Add missing of_node_put() in wcd934x_codec_parse_data

[ Upstream commit 9531a631379169d57756b2411178c6238655df88 ]

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.
This is similar to commit 64b92de9603f
("ASoC: wcd9335: fix a leaked reference by adding missing of_node_put")

Fixes: a61f3b4f476e ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220316083631.14103-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: msm8916-wcd-analog: Fix error handling in pm8916_wcd_analog_spmi_probe

[ Upstream commit 9ebd62d60edcd4d9c75485e5ccd0b79581ad3c49 ]

In the error handling path, the clk_prepare_enable() function
call should be balanced by a corresponding 'clk_disable_unprepare()'
call , as already done in the remove function.

Fixes: de66b3455023 ("ASoC: codecs: msm8916-wcd-analog: add MBHC support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220316041924.17560-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: atmel: Fix error handling in sam9x5_wm8731_driver_probe

[ Upstream commit 740dc3e846537c3743da98bf106f376023fd085c ]

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.

This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error path.

Fixes: fdbcb3cba54b ("ASoC: atmel: machine driver for at91sam9x5-wm8731 boards")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220316111530.4551-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: davinci_mmc: Handle error for clk_enable

[ Upstream commit 09e7af76db02c74f2a339b3cb2d95460fa2ddbe4 ]

As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.

Fixes: bbce5802afc5 ("davinci: mmc: updates to suspend/resume implementation")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220308071415.1093393-1-jiasheng@iscas.ac.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: msm8916-wcd-digital: Fix missing clk_disable_unprepare() in msm8916_wcd_digital_probe

[ Upstream commit 375a347da4889f64d86e1ab7f4e6702b6e9bf299 ]

Fix the missing clk_disable_unprepare() before return
from msm8916_wcd_digital_probe in the error handling case.

Fixes: 150db8c5afa1 ("ASoC: codecs: Add msm8916-wcd digital codec")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220307084523.28687-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: enable DMI L1 for playback streams

[ Upstream commit a174e72e2355b9025205b4b6727bf43047eac6c6 ]

Add back logic to mark all playback streams as L1 compatible.

Fixes: 246dd4287dfb ("ASoC: SOF: Intel: make DMI L1 selection more robust")
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220310171651.249385-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: imx-es8328: Fix error return code in imx_es8328_probe()

[ Upstream commit 3b891513f95cba3944e72c1139ea706d04f3781b ]

Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.

Fixes: 7e7292dba215 ("ASoC: fsl: add imx-es8328 machine driver")
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Link: https://lore.kernel.org/r/20220310091902.129299-1-wangwensheng4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_spdif: Disable TX clock when stop

[ Upstream commit 6ddf611219ba8f7c8fa0d26b39710a641e7d37a5 ]

The TX clock source may be changed in next case, need to
disable it when stop, otherwise the TX may not work after
changing the clock source, error log is:

aplay: pcm_write:2058: write error: Input/output error

Fixes: a2388a498ad2 ("ASoC: fsl: Add S/PDIF CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/1646879863-27711-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mxs: Fix error handling in mxs_sgtl5000_probe

[ Upstream commit 6ae0a4d8fec551ec581d620f0eb1fe31f755551c ]

This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error paths.
For example, when codec_np is NULL, saif_np[0] and saif_np[1]
are not NULL, it will cause leaks.

of_node_put() will check if the node pointer is NULL, so we can
call it directly to release the refcount of regular pointers.

Fixes: e968194b45c4 ("ASoC: mxs: add device tree support for mxs-sgtl5000")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220308020146.26496-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: dmaengine: do not use a NULL prepare_slave_config() callback

[ Upstream commit 9a1e13440a4f2e7566fd4c5eae6a53e6400e08a4 ]

Even if struct snd_dmaengine_pcm_config is used, prepare_slave_config()
callback might not be set. Check if this callback is set before using it.

Fixes: fa654e085300 ("ASoC: dmaengine-pcm: Provide default config")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220307122202.2251639-2-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rk817: Fix missing clk_disable_unprepare() in rk817_platform_probe

[ Upstream commit a6b44a2518a08348bd0f0401e4d2b99233bbabc2 ]

Fix the missing clk_disable_unprepare() before return
from rk817_platform_probe() in the error handling case.

Fixes: 0d6a04da9b25 ("ASoC: Add Rockchip rk817 audio CODEC support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20220307090146.4104-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mediatek: mt8192-mt6359: Fix error handling in mt8192_mt6359_dev_probe

[ Upstream commit e45ac7831ff3e2934d58cce319c17c8ec763c95c ]

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.

This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error paths.
Fix this by calling of_node_put() in error handling too.

Fixes: 4e28491a7a19 ("ASoC: mediatek: mt8192-mt6359: fix device_node leak")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220308015224.23585-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mediatek: use of_device_get_match_data()

[ Upstream commit 3667a037e50a31555276a7989435126e501f0f15 ]

Uses of_device_get_match_data() helper to clean some boilerplate code.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20211227062153.3887447-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Add missing of_node_put() in imx8m_probe

[ Upstream commit 5575f7f49134c7386a684335c9007737c606d3b5 ]

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.

Fixes: afb93d716533 ("ASoC: SOF: imx: Add i.MX8M HW support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220308023325.31702-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rockchip: i2s: Fix missing clk_disable_unprepare() in rockchip_i2s_probe

[ Upstream commit f725d20579807a68afbe5dba69e78b8fa05f5ef0 ]

Fix the missing clk_disable_unprepare() before return
from rockchip_i2s_probe() in the error handling case.

Fixes: 01605ad12875 ("ASoC: rockchip-i2s: enable "hclk" for rockchip I2S controller")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220307083553.26009-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: atmel: Fix error handling in snd_proto_probe

[ Upstream commit b0bfaf0544d08d093d6211d7ef8816fb0b5b6c75 ]

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.

This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error paths.
Fix this by calling of_node_put() in error handling too.

Fixes: a45f8853a5f9 ("ASoC: Add driver for PROTO Audio CODEC (with a WM8731)")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220308013949.20323-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ivtv: fix incorrect device_caps for ivtvfb

[ Upstream commit 25e94139218c0293b4375233c14f2256d7dcfaa8 ]

The VIDIOC_G_FBUF and related overlay ioctls no longer worked (-ENOTTY was
returned).

The root cause was the introduction of the caps field in ivtv-driver.h.
While loading the ivtvfb module would update the video_device device_caps
field with V4L2_CAP_VIDEO_OUTPUT_OVERLAY it would not update that caps
field, and that's what the overlay ioctls would look at.

It's a bad idea to keep information in two places, so drop the caps field
and only use vdev.device_caps.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Martin Dauskardt <martin.dauskardt@gmx.de>
Fixes: 2161536516ed (media: media/pci: set device_caps in struct video_device)
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: saa7134: fix incorrect use to determine if list is empty

[ Upstream commit 9f1f4b642451d35667a4dc6a9c0a89d954b530a3 ]

'dev' will *always* be set by list_for_each_entry().
It is incorrect to assume that the iterator value will be NULL if the
list is empty.

Instead of checking the pointer it should be checked if
the list is empty.

Fixes: 79dd0c69f05f ("V4L: 925: saa7134 alsa is now a standalone module")
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: omapfb: Add missing of_node_put() in dvic_probe_of

[ Upstream commit a58c22cfbbf62fefca090334bbd35fd132e92a23 ]

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.

Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsi: Add check for clk_enable

[ Upstream commit 405afed8a728f23cfaa02f75bbc8bdd6b7322123 ]

As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.

Fixes: ab6f6d85210c ("ASoC: fsi: add master clock control functions")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220302062844.46869-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: wm8350: Handle error for wm8350_register_irq

[ Upstream commit db0350da8084ad549bca16cc0486c11cc70a1f9b ]

As the potential failure of the wm8350_register_irq(),
it should be better to check it and return error if fails.
Also, use 'free_' in order to avoid the same code.

Fixes: a6ba2b2dabb5 ("ASoC: Implement WM8350 headphone jack detection")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220304023821.391936-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: atmel: Add missing of_node_put() in at91sam9g20ek_audio_probe

[ Upstream commit f590797fa3c1bccdd19e55441592a23b46aef449 ]

This node pointer is returned by of_parse_phandle() with refcount
incremented in this function.
Calling of_node_put() to avoid the refcount leak.

Fixes: 531f67e41dcd ("ASoC: at91sam9g20ek-wm8731: convert to dt support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220307124539.1743-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vidtv: Check for null return of vzalloc

[ Upstream commit e6a21a14106d9718aa4f8e115b1e474888eeba44 ]

As the possible failure of the vzalloc(), e->encoder_buf might be NULL.
Therefore, it should be better to check it in order
to guarantee the success of the initialization.
If fails, we need to free not only 'e' but also 'e->name'.
Also, if the allocation for ctx fails, we need to free 'e->encoder_buf'
else.

Fixes: f90cf6079bf6 ("media: vidtv: add a bridge driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: stk1160: If start stream fails, return buffers with VB2_BUF_STATE_QUEUED

[ Upstream commit fbe04b49a54e31f4321d632270207f0e6304cd16 ]

If the callback 'start_streaming' fails, then all
queued buffers in the driver should be returned with
state 'VB2_BUF_STATE_QUEUED'. Currently, they are
returned with 'VB2_BUF_STATE_ERROR' which is wrong.
Fix this. This also fixes the warning:

[   65.583633] WARNING: CPU: 5 PID: 593 at drivers/media/common/videobuf2/videobuf2-core.c:1612 vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[   65.585027] Modules linked in: snd_usb_audio snd_hwdep snd_usbmidi_lib snd_rawmidi snd_soc_hdmi_codec dw_hdmi_i2s_audio saa7115 stk1160 videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc crct10dif_ce panfrost snd_soc_simple_card snd_soc_audio_graph_card snd_soc_spdif_tx snd_soc_simple_card_utils gpu_sched phy_rockchip_pcie snd_soc_rockchip_i2s rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi cec drm_kms_helper drm rtc_rk808 rockchip_saradc industrialio_triggered_buffer kfifo_buf rockchip_thermal pcie_rockchip_host ip_tables x_tables ipv6
[   65.589383] CPU: 5 PID: 593 Comm: v4l2src0:src Tainted: G        W         5.16.0-rc4-62408-g32447129cb30-dirty #14
[   65.590293] Hardware name: Radxa ROCK Pi 4B (DT)
[   65.590696] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   65.591304] pc : vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[   65.591850] lr : vb2_start_streaming+0x6c/0x160 [videobuf2_common]
[   65.592395] sp : ffff800012bc3ad0
[   65.592685] x29: ffff800012bc3ad0 x28: 0000000000000000 x27: ffff800012bc3cd8
[   65.593312] x26: 0000000000000000 x25: ffff00000d8a7800 x24: 0000000040045612
[   65.593938] x23: ffff800011323000 x22: ffff800012bc3cd8 x21: ffff00000908a8b0
[   65.594562] x20: ffff00000908a8c8 x19: 00000000fffffff4 x18: ffffffffffffffff
[   65.595188] x17: 000000040044ffff x16: 00400034b5503510 x15: ffff800011323f78
[   65.595813] x14: ffff000013163886 x13: ffff000013163885 x12: 00000000000002ce
[   65.596439] x11: 0000000000000028 x10: 0000000000000001 x9 : 0000000000000228
[   65.597064] x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff726c5e78
[   65.597690] x5 : ffff800012bc3990 x4 : 0000000000000000 x3 : ffff000009a34880
[   65.598315] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000007cd99f0
[   65.598940] Call trace:
[   65.599155]  vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[   65.599672]  vb2_core_streamon+0x17c/0x1a8 [videobuf2_common]
[   65.600179]  vb2_streamon+0x54/0x88 [videobuf2_v4l2]
[   65.600619]  vb2_ioctl_streamon+0x54/0x60 [videobuf2_v4l2]
[   65.601103]  v4l_streamon+0x3c/0x50 [videodev]
[   65.601521]  __video_do_ioctl+0x1a4/0x428 [videodev]
[   65.601977]  video_usercopy+0x320/0x828 [videodev]
[   65.602419]  video_ioctl2+0x3c/0x58 [videodev]
[   65.602830]  v4l2_ioctl+0x60/0x90 [videodev]
[   65.603227]  __arm64_sys_ioctl+0xa8/0xe0
[   65.603576]  invoke_syscall+0x54/0x118
[   65.603911]  el0_svc_common.constprop.3+0x84/0x100
[   65.604332]  do_el0_svc+0x34/0xa0
[   65.604625]  el0_svc+0x1c/0x50
[   65.604897]  el0t_64_sync_handler+0x88/0xb0
[   65.605264]  el0t_64_sync+0x16c/0x170
[   65.605587] ---[ end trace 578e0ba07742170d ]---

Fixes: 8ac456495a33d ("[media] stk1160: Stop device and unqueue buffers when start_streaming() fails")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

m68k: coldfire/device.c: only build for MCF_EDMA when h/w macros are defined

[ Upstream commit e6e1e7b19fa132d23d09c465942aab4c110d3da9 ]

When CONFIG_MCF_EDMA is set (due to COMPILE_TEST, not due to
CONFIG_M5441x), coldfire/device.c has compile errors due to
missing MCFEDMA_* symbols. In the .config file that was provided,
CONFIG_M5206=y, not CONFIG_M5441x, so <asm/m5441xsim.h> is not
included in coldfire/device.c.

Only build the MCF_EDMA code in coldfire/device.c if the MCFEDMA_*
hardware macros are defined.

Fixes these build errors:

../arch/m68k/coldfire/device.c:512:35: error: 'MCFEDMA_BASE' undeclared here (not in a function); did you mean 'MCFDMA_BASE1'?
  512 |                 .start          = MCFEDMA_BASE,
../arch/m68k/coldfire/device.c:513:50: error: 'MCFEDMA_SIZE' undeclared here (not in a function)
  513 |                 .end            = MCFEDMA_BASE + MCFEDMA_SIZE - 1,
../arch/m68k/coldfire/device.c:517:35: error: 'MCFEDMA_IRQ_INTR0' undeclared here (not in a function)
  517 |                 .start          = MCFEDMA_IRQ_INTR0,
../arch/m68k/coldfire/device.c:523:35: error: 'MCFEDMA_IRQ_INTR16' undeclared here (not in a function)
  523 |                 .start          = MCFEDMA_IRQ_INTR16,
../arch/m68k/coldfire/device.c:529:35: error: 'MCFEDMA_IRQ_INTR56' undeclared here (not in a function)
  529 |                 .start          = MCFEDMA_IRQ_INTR56,
../arch/m68k/coldfire/device.c:535:35: error: 'MCFEDMA_IRQ_ERR' undeclared here (not in a function)
  535 |                 .start          = MCFEDMA_IRQ_ERR,

Fixes: d7e9d01ac292 ("m68k: add ColdFire mcf5441x eDMA platform support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: lore.kernel.org/r/202203030252.P752DK46-lkp@intel.com
Cc: Angelo Dureghello <angelo@sysam.it>
Cc: Greg Ungerer <gerg@kernel.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: uclinux-dev@uclinux.org
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly

[ Upstream commit 37cbd3c522869247ed4525b5042ff4c6a276c813 ]

A label reference without brackets is a path string, not a phandle as
intended. Add the missing brackets.

Fixes: a5002c41c383 ("arm64: dts: rockchip: add WiFi module support for Firefly-RK3399")
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220304202559.317749-1-robh@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: firewire-lib: fix uninitialized flag for AV/C deferred transaction

[ Upstream commit bf0cd60b7e33cf221fbe1114e4acb2c828b0af0d ]

AV/C deferred transaction was supported at a commit 00a7bb81c20f ("ALSA:
firewire-lib: Add support for deferred transaction") while 'deferrable'
flag can be uninitialized for non-control/notify AV/C transactions.
UBSAN reports it:

kernel: ================================================================================
kernel: UBSAN: invalid-load in /build/linux-aa0B4d/linux-5.15.0/sound/firewire/fcp.c:363:9
kernel: load of value 158 is not a valid value for type '_Bool'
kernel: CPU: 3 PID: 182227 Comm: irq/35-firewire Tainted: P           OE     5.15.0-18-generic #18-Ubuntu
kernel: Hardware name: Gigabyte Technology Co., Ltd. AX370-Gaming 5/AX370-Gaming 5, BIOS F42b 08/01/2019
kernel: Call Trace:
kernel:  <IRQ>
kernel:  show_stack+0x52/0x58
kernel:  dump_stack_lvl+0x4a/0x5f
kernel:  dump_stack+0x10/0x12
kernel:  ubsan_epilogue+0x9/0x45
kernel:  __ubsan_handle_load_invalid_value.cold+0x44/0x49
kernel:  fcp_response.part.0.cold+0x1a/0x2b [snd_firewire_lib]
kernel:  fcp_response+0x28/0x30 [snd_firewire_lib]
kernel:  fw_core_handle_request+0x230/0x3d0 [firewire_core]
kernel:  handle_ar_packet+0x1d9/0x200 [firewire_ohci]
kernel:  ? handle_ar_packet+0x1d9/0x200 [firewire_ohci]
kernel:  ? transmit_complete_callback+0x9f/0x120 [firewire_core]
kernel:  ar_context_tasklet+0xa8/0x2e0 [firewire_ohci]
kernel:  tasklet_action_common.constprop.0+0xea/0xf0
kernel:  tasklet_action+0x22/0x30
kernel:  __do_softirq+0xd9/0x2e3
kernel:  ? irq_finalize_oneshot.part.0+0xf0/0xf0
kernel:  do_softirq+0x75/0xa0
kernel:  </IRQ>
kernel:  <TASK>
kernel:  __local_bh_enable_ip+0x50/0x60
kernel:  irq_forced_thread_fn+0x7e/0x90
kernel:  irq_thread+0xba/0x190
kernel:  ? irq_thread_fn+0x60/0x60
kernel:  kthread+0x11e/0x140
kernel:  ? irq_thread_check_affinity+0xf0/0xf0
kernel:  ? set_kthread_struct+0x50/0x50
kernel:  ret_from_fork+0x22/0x30
kernel:  </TASK>
kernel: ================================================================================

This commit fixes the bug. The bug has no disadvantage for the non-
control/notify AV/C transactions since the flag has an effect for AV/C
response with INTERIM (0x0f) status which is not used for the transactions
in AV/C general specification.

Fixes: 00a7bb81c20f ("ALSA: firewire-lib: Add support for deferred transaction")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20220304125647.78430-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: emif: check the pointer temp in get_device_details()

[ Upstream commit 5b5ab1bfa1898c6d52936a57c25c5ceba2cb2f87 ]

The pointer temp is allocated by devm_kzalloc(), so it should be
checked for error handling.

Fixes: 7ec944538dde ("memory: emif: add basic infrastructure for EMIF driver")
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20220225132552.27894-1-baijiaju1990@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: emif: Add check for setup_interrupts

[ Upstream commit fd7bd80b46373887b390852f490f21b07e209498 ]

As the potential failure of the devm_request_threaded_irq(),
it should be better to check the return value of the
setup_interrupts() and return error if fails.

Fixes: 68b4aee35d1f ("memory: emif: add interrupt and temperature handling")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220224025444.3256530-1-jiasheng@iscas.ac.cn
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>