Arnd Bergmann [Wed, 18 Aug 2021 13:35:44 +0000 (15:35 +0200)]
Merge tag 'ixp4xx-del-boardfiles-v5.15' of git://git./linux/kernel/git/linusw/linux-nomadik into arm/soc
This deletes the following IXP4xx boardfiles:
- NSLU2
- NAS100D
- D-Link DSM-G600
- Omicron
- Gateway WG302v2
- Arcom Vulcan
- Avila
- Intel reference designs
- Coyote and IXDPG425
- GTW5715
- Freecom FSG-3
In each case except Omicron, the board has been replaced by
a corresponding device tree and tested where someone
volunteered: Marc Zyngier has tested Arcom Vulcan and Freecom
FSG-3 and I have tested NSLU2 and Avila for example. All
that were tested boot to prompt, some devices may need some
more massage before working perfectly.
We can just as well delete these board files because we are
confident that we will fix them to a working state if people
are able to test patches.
I am holding back the following boards for now:
- Gateway 7001 - because Zoltan is working on this board and
needs more time. He might need to test things with the board
file so let's allow him time for that.
- Goramo MLR - the consensus is to replace this with a dry
coded device tree, but the bindings for that tree need some
more time to make so we keep the boardfile around until
we can merge a complete device tree for it.
After these two (target v5.16) we can delete the remaining
board files and the old mach structure along with the old PCI
driver.
* tag 'ixp4xx-del-boardfiles-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: ixp4xx: Delete the Freecom FSG-3 boardfiles
ARM: ixp4xx: Delete GTWX5715 board files
ARM: ixp4xx: Delete Coyote and IXDPG425 boardfiles
ARM: ixp4xx: Delete Intel reference design boardfiles
ARM: ixp4xx: Delete Avila boardfiles
ARM: ixp4xx: Delete the Arcom Vulcan boardfiles
ARM: ixp4xx: Delete Gateway WG302v2 boardfiles
ARM: ixp4xx: Delete Omicron boardfiles
ARM: ixp4xx: Delete the D-Link DSM-G600 boardfiles
ARM: ixp4xx: Delete NAS100D boardfiles
ARM: ixp4xx: Delete NSLU2 boardfiles
Link: https://lore.kernel.org/r/CACRpkdY=sPDkzmbmm+0UQnJi7BXZKH14GLmyVwKC+4cLCJpmdA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Linus Walleij [Thu, 29 Jul 2021 14:43:56 +0000 (16:43 +0200)]
ARM: ixp4xx: Delete the Freecom FSG-3 boardfiles
This board is replaced with the corresponding device tree.
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Thu, 29 Jul 2021 08:53:33 +0000 (10:53 +0200)]
ARM: ixp4xx: Delete GTWX5715 board files
This board is replaced with the corresponding device tree.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Wed, 28 Jul 2021 15:14:10 +0000 (17:14 +0200)]
ARM: ixp4xx: Delete Coyote and IXDPG425 boardfiles
These boards are replaced with the corresponding device trees.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Tue, 27 Jul 2021 22:40:11 +0000 (00:40 +0200)]
ARM: ixp4xx: Delete Intel reference design boardfiles
These boards are replaced with the corresponding device trees.
Cc: Deepak Saxena <dsaxena@plexity.net>
Cc: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Tue, 27 Jul 2021 13:00:39 +0000 (15:00 +0200)]
ARM: ixp4xx: Delete Avila boardfiles
This board is replaced with the corresponding device tree.
There is also the "loft" board which is just a Kconfi entry
and which reuses the same boardfile.
If there is interest in the Loft variant and someone is willing
to test I can create a special DT superset for this board,
which only differs in PCI set-up.
Cc: Michael-Luke Jones <mlj28@cam.ac.uk>
Cc: Deepak Saxena <dsaxena@plexity.net>
Cc: Tom Billman <kernel@giantshoulderinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Mon, 26 Jul 2021 12:22:07 +0000 (14:22 +0200)]
ARM: ixp4xx: Delete the Arcom Vulcan boardfiles
This board is replaced with the corresponding device tree.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Mon, 26 Jul 2021 12:19:32 +0000 (14:19 +0200)]
ARM: ixp4xx: Delete Gateway WG302v2 boardfiles
This board is replaced with the corresponding device tree.
Cc: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Mon, 26 Jul 2021 12:30:29 +0000 (14:30 +0200)]
ARM: ixp4xx: Delete Omicron boardfiles
These boards are reported obsoleted by the manufacturer and no
known community users exist.
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Mon, 26 Jul 2021 12:35:38 +0000 (14:35 +0200)]
ARM: ixp4xx: Delete the D-Link DSM-G600 boardfiles
This board is replaced with the corresponding device tree.
Cc: Michael-Luke Jones <mlj28@cam.ac.uk>
Cc: Rod Whitby <rod@whitby.id.au>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Michael Westerhof <mwester@dls.net>
Cc: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Wed, 14 Jul 2021 12:01:22 +0000 (14:01 +0200)]
ARM: ixp4xx: Delete NAS100D boardfiles
The NAS100D is now completely migrated to use device tree exclusively
so delete the boardfiles.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Wed, 14 Jul 2021 11:51:54 +0000 (13:51 +0200)]
ARM: ixp4xx: Delete NSLU2 boardfiles
The NSLU2 is now completely migrated to use device tree exclusively
so delete the boardfiles.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Arnd Bergmann [Thu, 12 Aug 2021 20:29:50 +0000 (22:29 +0200)]
Merge tag 'omap-for-v5.15/soc-late-signed' of git://git./linux/kernel/git/tmlind/linux-omap into arm/soc
Two missed SoC changes for omaps for v5.15
I managed to miss applying two out of three Kconfig changes earlier
to drop unused entries, here are the missed changes.
* tag 'omap-for-v5.15/soc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
arm: omap2: Drop the unused OMAP_PACKAGE_* KConfig entries
arm: omap2: Drop obsolete MACH_OMAP3_PANDORA entry
Link: https://lore.kernel.org/r/pull-1628751694-126144@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 12 Aug 2021 20:25:25 +0000 (22:25 +0200)]
Merge tag 'omap-for-v5.15/soc-signed' of git://git./linux/kernel/git/tmlind/linux-omap into arm/soc
SoC changes for omaps for v5.15
Update MAINTAINERS for SanCloud devices and drop unused old Kconfig
* tag 'omap-for-v5.15/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
MAINTAINERS: Adopt SanCloud dts files as supported
arm: omap2: Drop MACH_OMAP3517EVM entry
Link: https://lore.kernel.org/r/pull-1628153040-834155@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Peter Robinson [Sun, 13 Jun 2021 12:51:05 +0000 (13:51 +0100)]
arm: omap2: Drop the unused OMAP_PACKAGE_* KConfig entries
The OMAP_PACKAGE_* Kconfig entries are no longer referenced
in the kernel so can be dropped as they're obsolete.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Peter Robinson [Sun, 13 Jun 2021 12:51:04 +0000 (13:51 +0100)]
arm: omap2: Drop obsolete MACH_OMAP3_PANDORA entry
The MACH_OMAP3_PANDORA is no longer referenced anywhere in the kernel
options so it can now be dropped as the board has long moved to DT.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Arnd Bergmann [Wed, 4 Aug 2021 13:58:24 +0000 (15:58 +0200)]
Merge tag 'at91-soc-5.15' of git://git./linux/kernel/git/at91/linux into arm/soc
AT91 soc for 5.15:
- add new SoC based on a Cortex-A7 core: the SAMA7G5 family
- mach-at91 entry, Kconfig and header files
- Power Management Controller (PMC) code and associated power management
changes. Support for suspend/resume, Ultra Low Power modes and
Backup with Memory in Self-Refresh mode.
- Power management association with DDR controller and
shutdown controller for addressing this variety of modes.
* tag 'at91-soc-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: (26 commits)
ARM: at91: pm: add sama7g5 shdwc
ARM: at91: pm: add pm support for SAMA7G5
ARM: at91: sama7: introduce sama7 SoC family
ARM: at91: pm: add sama7g5's pmc
ARM: at91: pm: add backup mode support for SAMA7G5
ARM: at91: pm: save ddr phy calibration data to securam
ARM: at91: pm: add sama7g5 ddr phy controller
ARM: at91: pm: add sama7g5 ddr controller
ARM: at91: pm: wait for ddr power mode off
ARM: at91: pm: add support for 2.5V LDO regulator control
ARM: at91: pm: add support for MCK1..4 save/restore for ulp modes
ARM: at91: pm: add self-refresh support for sama7g5
ARM: at91: ddr: add registers definitions for sama7g5's ddr
ARM: at91: sfrbu: add sfrbu registers definitions for sama7g5
ARM: at91: pm: add support for waiting MCK1..4
ARM: at91: pm: s/CONFIG_SOC_SAM9X60/CONFIG_HAVE_AT91_SAM9X60_PLL/g
ARM: at91: pm: avoid push and pop on stack while memory is in self-refersh
ARM: at91: pm: use r7 instead of tmp1
ARM: at91: pm: do not initialize pdev
ARM: at91: pm: check for different controllers in at91_pm_modes_init()
...
Link: https://lore.kernel.org/r/20210804084316.12641-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Sat, 27 Feb 2021 12:40:09 +0000 (13:40 +0100)]
ARM: ep93xx: remove MaverickCrunch support
The MaverickCrunch support for ep93xx never made it into glibc and
was removed from gcc in its 4.8 release in 2012. It is now one of
the last parts of arch/arm/ that fails to build with the clang
integrated assembler, which is unlikely to ever want to support it.
The two alternatives are to force the use of binutils/gas when
building the crunch support, or to remove it entirely.
According to Hartley Sweeten:
"Martin Guy did a lot of work trying to get the maverick crunch working
but I was never able to successfully use it for anything. It "kind"
of works but depending on the EP93xx silicon revision there are still
a number of hardware bugs that either give imprecise or garbage results.
I have no problem with removing the kernel support for the maverick
crunch."
Unless someone else comes up with a good reason to keep it around,
remove it now. This touches mostly the ep93xx platform, but removes
a bit of code from ARM common ptrace and signal frame handling as well.
If there are remaining users of MaverickCrunch, they can use LTS
kernels for at least another five years before kernel support ends.
Link: https://lore.kernel.org/linux-arm-kernel/20210802141245.1146772-1-arnd@kernel.org/
Link: https://lore.kernel.org/linux-arm-kernel/20210226164345.3889993-1-arnd@kernel.org/
Link: https://github.com/ClangBuiltLinux/linux/issues/1272
Link: https://gcc.gnu.org/legacy-ml/gcc/2008-03/msg01063.html
Cc: "Martin Guy" <martinwguy@martinwguy@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Linus Torvalds [Mon, 2 Aug 2021 00:04:17 +0000 (17:04 -0700)]
Linux 5.14-rc4
Linus Torvalds [Sun, 1 Aug 2021 19:25:30 +0000 (12:25 -0700)]
Merge tag 'perf-tools-fixes-for-v5.14-2021-08-01' of git://git./linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Revert "perf map: Fix dso->nsinfo refcounting", this makes 'perf top'
abort, uncovering a design flaw on how namespace information is kept.
The fix for that is more than we can do right now, leave it for the
next merge window.
- Split --dump-raw-trace by AUX records for ARM's CoreSight, fixing up
the decoding of some records.
- Fix PMU alias matching.
Thanks to James Clark and John Garry for these fixes.
* tag 'perf-tools-fixes-for-v5.14-2021-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
Revert "perf map: Fix dso->nsinfo refcounting"
perf pmu: Fix alias matching
perf cs-etm: Split --dump-raw-trace by AUX records
Linus Torvalds [Sun, 1 Aug 2021 19:18:44 +0000 (12:18 -0700)]
Merge tag 'powerpc-5.14-4' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Don't use r30 in VDSO code, to avoid breaking existing Go lang
programs.
- Change an export symbol to allow non-GPL modules to use spinlocks
again.
Thanks to Paul Menzel, and Srikar Dronamraju.
* tag 'powerpc-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vdso: Don't use r30 to avoid breaking Go lang
powerpc/pseries: Fix regression while building external modules
Linus Torvalds [Sun, 1 Aug 2021 19:07:23 +0000 (12:07 -0700)]
Merge tag 'xfs-5.14-fixes-2' of git://git./fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"This contains a bunch of bug fixes in XFS.
Dave and I have been busy the last couple of weeks to find and fix as
many log recovery bugs as we can find; here are the results so far. Go
fstests -g recoveryloop! ;)
- Fix a number of coordination bugs relating to cache flushes for
metadata writeback, cache flushes for multi-buffer log writes, and
FUA writes for single-buffer log writes
- Fix a bug with incorrect replay of attr3 blocks
- Fix unnecessary stalls when flushing logs to disk
- Fix spoofing problems when recovering realtime bitmap blocks"
* tag 'xfs-5.14-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: prevent spoofing of rtbitmap blocks when recovering buffers
xfs: limit iclog tail updates
xfs: need to see iclog flags in tracing
xfs: Enforce attr3 buffer recovery order
xfs: logging the on disk inode LSN can make it go backwards
xfs: avoid unnecessary waits in xfs_log_force_lsn()
xfs: log forces imply data device cache flushes
xfs: factor out forced iclog flushes
xfs: fix ordering violation between cache flushes and tail updates
xfs: fold __xlog_state_release_iclog into xlog_state_release_iclog
xfs: external logs need to flush data device
xfs: flush data dev on external log write
Linus Torvalds [Sat, 31 Jul 2021 16:25:12 +0000 (09:25 -0700)]
Merge tag '5.14-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three cifs/smb3 fixes, including two for stable, and a fix for an
fallocate problem noticed by Clang"
* tag '5.14-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: add missing parsing of backupuid
smb3: rc uninitialized in one fallocate path
SMB3: fix readpage for large swap cache
Linus Torvalds [Fri, 30 Jul 2021 23:01:36 +0000 (16:01 -0700)]
Merge tag 'net-5.14-rc4' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.14-rc4, including fixes from bpf, can, WiFi
(mac80211) and netfilter trees.
Current release - regressions:
- mac80211: fix starting aggregation sessions on mesh interfaces
Current release - new code bugs:
- sctp: send pmtu probe only if packet loss in Search Complete state
- bnxt_en: add missing periodic PHC overflow check
- devlink: fix phys_port_name of virtual port and merge error
- hns3: change the method of obtaining default ptp cycle
- can: mcba_usb_start(): add missing urb->transfer_dma initialization
Previous releases - regressions:
- set true network header for ECN decapsulation
- mlx5e: RX, avoid possible data corruption w/ relaxed ordering and
LRO
- phy: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54811
PHY
- sctp: fix return value check in __sctp_rcv_asconf_lookup
Previous releases - always broken:
- bpf:
- more spectre corner case fixes, introduce a BPF nospec
instruction for mitigating Spectre v4
- fix OOB read when printing XDP link fdinfo
- sockmap: fix cleanup related races
- mac80211: fix enabling 4-address mode on a sta vif after assoc
- can:
- raw: raw_setsockopt(): fix raw_rcv panic for sock UAF
- j1939: j1939_session_deactivate(): clarify lifetime of session
object, avoid UAF
- fix number of identical memory leaks in USB drivers
- tipc:
- do not blindly write skb_shinfo frags when doing decryption
- fix sleeping in tipc accept routine"
* tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
gve: Update MAINTAINERS list
can: esd_usb2: fix memory leak
can: ems_usb: fix memory leak
can: usb_8dev: fix memory leak
can: mcba_usb_start(): add missing urb->transfer_dma initialization
can: hi311x: fix a signedness bug in hi3110_cmd()
MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver
bpf: Fix leakage due to insufficient speculative store bypass mitigation
bpf: Introduce BPF nospec instruction for mitigating Spectre v4
sis900: Fix missing pci_disable_device() in probe and remove
net: let flow have same hash in two directions
nfc: nfcsim: fix use after free during module unload
tulip: windbond-840: Fix missing pci_disable_device() in probe and remove
sctp: fix return value check in __sctp_rcv_asconf_lookup
nfc: s3fwrn5: fix undefined parameter values in dev_err()
net/mlx5: Fix mlx5_vport_tbl_attr chain from u16 to u32
net/mlx5e: Fix nullptr in mlx5e_hairpin_get_mdev()
net/mlx5: Unload device upon firmware fatal error
net/mlx5e: Fix page allocation failure for ptp-RQ over SF
net/mlx5e: Fix page allocation failure for trap-RQ over SF
...
Linus Torvalds [Fri, 30 Jul 2021 22:56:24 +0000 (15:56 -0700)]
Merge tag 'acpi-5.14-rc4' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These revert a recent IRQ resources handling modification that turned
out to be problematic, fix suspend-to-idle handling on AMD platforms
to take upcoming systems into account properly and fix the retrieval
of the DPTF attributes of the PCH FIVR.
Specifics:
- Revert recent change of the ACPI IRQ resources handling that
attempted to improve the ACPI IRQ override selection logic, but
introduced serious regressions on some systems (Hui Wang).
- Fix up quirks for AMD platforms in the suspend-to-idle support code
so as to take upcoming systems using uPEP HID AMDI007 into account
as appropriate (Mario Limonciello).
- Fix the code retrieving DPTF attributes of the PCH FIVR so that it
agrees on the return data type with the ACPI control method
evaluated for this purpose (Srinivas Pandruvada)"
* tag 'acpi-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: DPTF: Fix reading of attributes
Revert "ACPI: resources: Add checks for ACPI IRQ override"
ACPI: PM: Add support for upcoming AMD uPEP HID AMDI007
Linus Torvalds [Fri, 30 Jul 2021 22:42:34 +0000 (15:42 -0700)]
pipe: make pipe writes always wake up readers
Since commit
1b6b26ae7053 ("pipe: fix and clarify pipe write wakeup
logic") we have sanitized the pipe write logic, and would only try to
wake up readers if they needed it.
In particular, if the pipe already had data in it before the write,
there was no point in trying to wake up a reader, since any existing
readers must have been aware of the pre-existing data already. Doing
extraneous wakeups will only cause potential thundering herd problems.
However, it turns out that some Android libraries have misused the EPOLL
interface, and expected "edge triggered" be to "any new write will
trigger it". Even if there was no edge in sight.
Quoting Sandeep Patil:
"The commit
1b6b26ae7053 ('pipe: fix and clarify pipe write wakeup
logic') changed pipe write logic to wakeup readers only if the pipe
was empty at the time of write. However, there are libraries that
relied upon the older behavior for notification scheme similar to
what's described in [1]
One such library 'realm-core'[2] is used by numerous Android
applications. The library uses a similar notification mechanism as GNU
Make but it never drains the pipe until it is full. When Android moved
to v5.10 kernel, all applications using this library stopped working.
The library has since been fixed[3] but it will be a while before all
applications incorporate the updated library"
Our regression rule for the kernel is that if applications break from
new behavior, it's a regression, even if it was because the application
did something patently wrong. Also note the original report [4] by
Michal Kerrisk about a test for this epoll behavior - but at that point
we didn't know of any actual broken use case.
So add the extraneous wakeup, to approximate the old behavior.
[ I say "approximate", because the exact old behavior was to do a wakeup
not for each write(), but for each pipe buffer chunk that was filled
in. The behavior introduced by this change is not that - this is just
"every write will cause a wakeup, whether necessary or not", which
seems to be sufficient for the broken library use. ]
It's worth noting that this adds the extraneous wakeup only for the
write side, while the read side still considers the "edge" to be purely
about reading enough from the pipe to allow further writes.
See commit
f467a6a66419 ("pipe: fix and clarify pipe read wakeup logic")
for the pipe read case, which remains that "only wake up if the pipe was
full, and we read something from it".
Link: https://lore.kernel.org/lkml/CAHk-=wjeG0q1vgzu4iJhW5juPkTsjTYmiqiMUYAebWW+0bam6w@mail.gmail.com/
Link: https://github.com/realm/realm-core
Link: https://github.com/realm/realm-core/issues/4666
Link: https://lore.kernel.org/lkml/CAKgNAkjMBGeAwF=2MKK758BhxvW58wYTgYKB2V-gY1PwXxrH+Q@mail.gmail.com/
Link: https://lore.kernel.org/lkml/20210729222635.2937453-1-sspatil@android.com/
Reported-by: Sandeep Patil <sspatil@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnaldo Carvalho de Melo [Fri, 30 Jul 2021 21:26:22 +0000 (18:26 -0300)]
Revert "perf map: Fix dso->nsinfo refcounting"
This makes 'perf top' abort in some cases, and the right fix will
involve surgery that is too much to do at this stage, so revert for now
and fix it in the next merge window.
This reverts commit
2d6b74baa7147251c30a46c4996e8cc224aa2dc5.
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rafael J. Wysocki [Fri, 30 Jul 2021 18:26:38 +0000 (20:26 +0200)]
Merge branches 'acpi-resources' and 'acpi-dptf'
* acpi-resources:
Revert "ACPI: resources: Add checks for ACPI IRQ override"
* acpi-dptf:
ACPI: DPTF: Fix reading of attributes
Linus Torvalds [Fri, 30 Jul 2021 18:08:12 +0000 (11:08 -0700)]
Merge tag 'block-5.14-2021-07-30' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- gendisk freeing fix (Christoph)
- blk-iocost wake ordering fix (Tejun)
- tag allocation error handling fix (John)
- loop locking fix. While this isn't the prettiest fix in the world,
nobody has any good alternatives for 5.14. Something to likely
revisit for 5.15. (Tetsuo)
* tag 'block-5.14-2021-07-30' of git://git.kernel.dk/linux-block:
block: delay freeing the gendisk
blk-iocost: fix operation ordering in iocg_wake_fn()
blk-mq-sched: Fix blk_mq_sched_alloc_tags() error handling
loop: reintroduce global lock for safe loop_validate_file() traversal
Linus Torvalds [Fri, 30 Jul 2021 18:01:47 +0000 (11:01 -0700)]
Merge tag 'io_uring-5.14-2021-07-30' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- A fix for block backed reissue (me)
- Reissue context hardening (me)
- Async link locking fix (Pavel)
* tag 'io_uring-5.14-2021-07-30' of git://git.kernel.dk/linux-block:
io_uring: fix poll requests leaking second poll entries
io_uring: don't block level reissue off completion path
io_uring: always reissue from task_work context
io_uring: fix race in unified task_work running
io_uring: fix io_prep_async_link locking
Linus Torvalds [Fri, 30 Jul 2021 17:56:47 +0000 (10:56 -0700)]
Merge tag 'libata-5.14-2021-07-30' of git://git.kernel.dk/linux-block
Pull libata fixlets from Jens Axboe:
- A fix for PIO highmem (Christoph)
- Kill HAVE_IDE as it's now unused (Lukas)
* tag 'libata-5.14-2021-07-30' of git://git.kernel.dk/linux-block:
arch: Kconfig: clean up obsolete use of HAVE_IDE
libata: fix ata_pio_sector for CONFIG_HIGHMEM
Linus Torvalds [Fri, 30 Jul 2021 17:50:09 +0000 (10:50 -0700)]
Merge tag 'for-5.14-rc3-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix -Warray-bounds warning, to help external patchset to make it
default treewide
- fix writeable device accounting (syzbot report)
- fix fsync and log replay after a rename and inode eviction
- fix potentially lost error code when submitting multiple bios for
compressed range
* tag 'for-5.14-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: calculate number of eb pages properly in csum_tree_block
btrfs: fix rw device counting in __btrfs_free_extra_devids
btrfs: fix lost inode on log replay after mix of fsync, rename and inode eviction
btrfs: mark compressed range uptodate only if all bio succeed
Linus Torvalds [Fri, 30 Jul 2021 17:36:36 +0000 (10:36 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- resume timing fix for intel-ish driver (Ye Xiang)
- fix for using incorrect MMIO register in amd_sfh driver (Dylan
MacKenzie)
- Cintiq 24HDT / 27QHDT regression fix and touch processing fix for
Wacom driver (Jason Gerecke)
- device removal bugfix for ft260 driver (Michael Zaidman)
- other small assorted fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: ft260: fix device removal due to USB disconnect
HID: wacom: Skip processing of touches with negative slot values
HID: wacom: Re-enable touch by default for Cintiq 24HDT / 27QHDT
HID: Kconfig: Fix spelling mistake "Uninterruptable" -> "Uninterruptible"
HID: apple: Add support for Keychron K1 wireless keyboard
HID: fix typo in Kconfig
HID: ft260: fix format type warning in ft260_word_show()
HID: amd_sfh: Use correct MMIO register for DMA address
HID: asus: Remove check for same LED brightness on set
HID: intel-ish-hid: use async resume function
Linus Torvalds [Fri, 30 Jul 2021 17:29:58 +0000 (10:29 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"7 patches.
Subsystems affected by this patch series: lib, ocfs2, and mm (slub,
migration, and memcg)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/memcg: fix NULL pointer dereference in memcg_slab_free_hook()
slub: fix unreclaimable slab stat for bulk free
mm/migrate: fix NR_ISOLATED corruption on 64-bit
mm: memcontrol: fix blocking rstat function called from atomic cgroup1 thresholding code
ocfs2: issue zeroout to EOF blocks
ocfs2: fix zero out valid data
lib/test_string.c: move string selftest in the Runtime Testing menu
Jakub Kicinski [Fri, 30 Jul 2021 17:29:52 +0000 (19:29 +0200)]
Merge tag 'linux-can-fixes-for-5.14-
20210730' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2021-07-30
The first patch is by me and adds Yasushi SHOJI as a reviewer for the
Microchip CAN BUS Analyzer Tool driver.
Dan Carpenter's patch fixes a signedness bug in the hi311x driver.
Pavel Skripkin provides 4 patches, the first targets the mcba_usb
driver by adding the missing urb->transfer_dma initialization, which
was broken in a previous commit. The last 3 patches fix a memory leak
in the usb_8dev, ems_usb and esd_usb2 driver.
* tag 'linux-can-fixes-for-5.14-
20210730' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: esd_usb2: fix memory leak
can: ems_usb: fix memory leak
can: usb_8dev: fix memory leak
can: mcba_usb_start(): add missing urb->transfer_dma initialization
can: hi311x: fix a signedness bug in hi3110_cmd()
MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver
====================
Link: https://lore.kernel.org/r/20210730070526.1699867-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wang Hai [Thu, 29 Jul 2021 21:53:54 +0000 (14:53 -0700)]
mm/memcg: fix NULL pointer dereference in memcg_slab_free_hook()
When I use kfree_rcu() to free a large memory allocated by kmalloc_node(),
the following dump occurs.
BUG: kernel NULL pointer dereference, address:
0000000000000020
[...]
Oops: 0000 [#1] SMP
[...]
Workqueue: events kfree_rcu_work
RIP: 0010:__obj_to_index include/linux/slub_def.h:182 [inline]
RIP: 0010:obj_to_index include/linux/slub_def.h:191 [inline]
RIP: 0010:memcg_slab_free_hook+0x120/0x260 mm/slab.h:363
[...]
Call Trace:
kmem_cache_free_bulk+0x58/0x630 mm/slub.c:3293
kfree_bulk include/linux/slab.h:413 [inline]
kfree_rcu_work+0x1ab/0x200 kernel/rcu/tree.c:3300
process_one_work+0x207/0x530 kernel/workqueue.c:2276
worker_thread+0x320/0x610 kernel/workqueue.c:2422
kthread+0x13d/0x160 kernel/kthread.c:313
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
When kmalloc_node() a large memory, page is allocated, not slab, so when
freeing memory via kfree_rcu(), this large memory should not be used by
memcg_slab_free_hook(), because memcg_slab_free_hook() is is used for
slab.
Using page_objcgs_check() instead of page_objcgs() in
memcg_slab_free_hook() to fix this bug.
Link: https://lkml.kernel.org/r/20210728145655.274476-1-wanghai38@huawei.com
Fixes:
270c6a71460e ("mm: memcontrol/slab: Use helpers to access slab page's memcg_data")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shakeel Butt [Thu, 29 Jul 2021 21:53:50 +0000 (14:53 -0700)]
slub: fix unreclaimable slab stat for bulk free
SLUB uses page allocator for higher order allocations and update
unreclaimable slab stat for such allocations. At the moment, the bulk
free for SLUB does not share code with normal free code path for these
type of allocations and have missed the stat update. So, fix the stat
update by common code. The user visible impact of the bug is the
potential of inconsistent unreclaimable slab stat visible through
meminfo and vmstat.
Link: https://lkml.kernel.org/r/20210728155354.3440560-1-shakeelb@google.com
Fixes:
6a486c0ad4dc ("mm, sl[ou]b: improve memory accounting")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Aneesh Kumar K.V [Thu, 29 Jul 2021 21:53:47 +0000 (14:53 -0700)]
mm/migrate: fix NR_ISOLATED corruption on 64-bit
Similar to commit
2da9f6305f30 ("mm/vmscan: fix NR_ISOLATED_FILE
corruption on 64-bit") avoid using unsigned int for nr_pages. With
unsigned int type the large unsigned int converts to a large positive
signed long.
Symptoms include CMA allocations hanging forever due to
alloc_contig_range->...->isolate_migratepages_block waiting forever in
"while (unlikely(too_many_isolated(pgdat)))".
Link: https://lkml.kernel.org/r/20210728042531.359409-1-aneesh.kumar@linux.ibm.com
Fixes:
c5fc5c3ae0c8 ("mm: migrate: account THP NUMA migration counters correctly")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Thu, 29 Jul 2021 21:53:44 +0000 (14:53 -0700)]
mm: memcontrol: fix blocking rstat function called from atomic cgroup1 thresholding code
Dan Carpenter reports:
The patch
2d146aa3aa84: "mm: memcontrol: switch to rstat" from Apr
29, 2021, leads to the following static checker warning:
kernel/cgroup/rstat.c:200 cgroup_rstat_flush()
warn: sleeping in atomic context
mm/memcontrol.c
3572 static unsigned long mem_cgroup_usage(struct mem_cgroup *memcg, bool swap)
3573 {
3574 unsigned long val;
3575
3576 if (mem_cgroup_is_root(memcg)) {
3577 cgroup_rstat_flush(memcg->css.cgroup);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This is from static analysis and potentially a false positive. The
problem is that mem_cgroup_usage() is called from __mem_cgroup_threshold()
which holds an rcu_read_lock(). And the cgroup_rstat_flush() function
can sleep.
3578 val = memcg_page_state(memcg, NR_FILE_PAGES) +
3579 memcg_page_state(memcg, NR_ANON_MAPPED);
3580 if (swap)
3581 val += memcg_page_state(memcg, MEMCG_SWAP);
3582 } else {
3583 if (!swap)
3584 val = page_counter_read(&memcg->memory);
3585 else
3586 val = page_counter_read(&memcg->memsw);
3587 }
3588 return val;
3589 }
__mem_cgroup_threshold() indeed holds the rcu lock. In addition, the
thresholding code is invoked during stat changes, and those contexts
have irqs disabled as well. If the lock breaking occurs inside the
flush function, it will result in a sleep from an atomic context.
Use the irqsafe flushing variant in mem_cgroup_usage() to fix this.
Link: https://lkml.kernel.org/r/20210726150019.251820-1-hannes@cmpxchg.org
Fixes:
2d146aa3aa84 ("mm: memcontrol: switch to rstat")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Junxiao Bi [Thu, 29 Jul 2021 21:53:41 +0000 (14:53 -0700)]
ocfs2: issue zeroout to EOF blocks
For punch holes in EOF blocks, fallocate used buffer write to zero the
EOF blocks in last cluster. But since ->writepage will ignore EOF
pages, those zeros will not be flushed.
This "looks" ok as commit
6bba4471f0cc ("ocfs2: fix data corruption by
fallocate") will zero the EOF blocks when extend the file size, but it
isn't. The problem happened on those EOF pages, before writeback, those
pages had DIRTY flag set and all buffer_head in them also had DIRTY flag
set, when writeback run by write_cache_pages(), DIRTY flag on the page
was cleared, but DIRTY flag on the buffer_head not.
When next write happened to those EOF pages, since buffer_head already
had DIRTY flag set, it would not mark page DIRTY again. That made
writeback ignore them forever. That will cause data corruption. Even
directio write can't work because it will fail when trying to drop pages
caches before direct io, as it found the buffer_head for those pages
still had DIRTY flag set, then it will fall back to buffer io mode.
To make a summary of the issue, as writeback ingores EOF pages, once any
EOF page is generated, any write to it will only go to the page cache,
it will never be flushed to disk even file size extends and that page is
not EOF page any more. The fix is to avoid zero EOF blocks with buffer
write.
The following code snippet from qemu-img could trigger the corruption.
656 open("
6b3711ae-3306-4bdd-823c-
cf1c0060a095.conv.2", O_RDWR|O_DIRECT|O_CLOEXEC) = 11
...
660 fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE,
2275868672, 327680 <unfinished ...>
660 fallocate(11, 0,
2275868672, 327680) = 0
658 pwrite64(11, "
Link: https://lkml.kernel.org/r/20210722054923.24389-2-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Junxiao Bi [Thu, 29 Jul 2021 21:53:38 +0000 (14:53 -0700)]
ocfs2: fix zero out valid data
If append-dio feature is enabled, direct-io write and fallocate could
run in parallel to extend file size, fallocate used "orig_isize" to
record i_size before taking "ip_alloc_sem", when
ocfs2_zeroout_partial_cluster() zeroout EOF blocks, i_size maybe already
extended by ocfs2_dio_end_io_write(), that will cause valid data zeroed
out.
Link: https://lkml.kernel.org/r/20210722054923.24389-1-junxiao.bi@oracle.com
Fixes:
6bba4471f0cc ("ocfs2: fix data corruption by fallocate")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matteo Croce [Thu, 29 Jul 2021 21:53:35 +0000 (14:53 -0700)]
lib/test_string.c: move string selftest in the Runtime Testing menu
STRING_SELFTEST is presented in the "Library routines" menu. Move it in
Kernel hacking > Kernel Testing and Coverage > Runtime Testing together
with other similar tests found in lib/
--- Runtime Testing
<*> Test functions located in the hexdump module at runtime
<*> Test string functions (NEW)
<*> Test functions located in the string_helpers module at runtime
<*> Test strscpy*() family of functions at runtime
<*> Test kstrto*() family of functions at runtime
<*> Test printf() family of functions at runtime
<*> Test scanf() family of functions at runtime
Link: https://lkml.kernel.org/r/20210719185158.190371-1-mcroce@linux.microsoft.com
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Catherine Sullivan [Thu, 29 Jul 2021 15:52:58 +0000 (08:52 -0700)]
gve: Update MAINTAINERS list
The team maintaining the gve driver has undergone some changes,
this updates the MAINTAINERS file accordingly.
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: Jon Olson <jonolson@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Link: https://lore.kernel.org/r/20210729155258.442650-1-csully@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lukas Bulwahn [Wed, 28 Jul 2021 18:21:15 +0000 (20:21 +0200)]
arch: Kconfig: clean up obsolete use of HAVE_IDE
The arch-specific Kconfig files use HAVE_IDE to indicate if IDE is
supported.
As IDE support and the HAVE_IDE config vanishes with commit
b7fb14d3ac63
("ide: remove the legacy ide driver"), there is no need to mention
HAVE_IDE in all those arch-specific Kconfig files.
The issue was identified with ./scripts/checkkconfigsymbols.py.
Fixes:
b7fb14d3ac63 ("ide: remove the legacy ide driver")
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210728182115.4401-1-lukas.bulwahn@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Skripkin [Tue, 27 Jul 2021 17:00:46 +0000 (20:00 +0300)]
can: esd_usb2: fix memory leak
In esd_usb2_setup_rx_urbs() MAX_RX_URBS coherent buffers are allocated
and there is nothing, that frees them:
1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
is not set (see esd_usb2_setup_rx_urbs) and this flag cannot be used
with coherent buffers.
So, all allocated buffers should be freed with usb_free_coherent()
explicitly.
Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.
Fixes:
96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Link: https://lore.kernel.org/r/b31b096926dcb35998ad0271aac4b51770ca7cc8.1627404470.git.paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Pavel Skripkin [Tue, 27 Jul 2021 17:00:33 +0000 (20:00 +0300)]
can: ems_usb: fix memory leak
In ems_usb_start() MAX_RX_URBS coherent buffers are allocated and
there is nothing, that frees them:
1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
is not set (see ems_usb_start) and this flag cannot be used with
coherent buffers.
So, all allocated buffers should be freed with usb_free_coherent()
explicitly.
Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.
Fixes:
702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Link: https://lore.kernel.org/r/59aa9fbc9a8cbf9af2bbd2f61a659c480b415800.1627404470.git.paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Pavel Skripkin [Tue, 27 Jul 2021 16:59:57 +0000 (19:59 +0300)]
can: usb_8dev: fix memory leak
In usb_8dev_start() MAX_RX_URBS coherent buffers are allocated and
there is nothing, that frees them:
1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
is not set (see usb_8dev_start) and this flag cannot be used with
coherent buffers.
So, all allocated buffers should be freed with usb_free_coherent()
explicitly.
Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.
Fixes:
0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Link: https://lore.kernel.org/r/d39b458cd425a1cf7f512f340224e6e9563b07bd.1627404470.git.paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Pavel Skripkin [Sun, 25 Jul 2021 10:36:30 +0000 (13:36 +0300)]
can: mcba_usb_start(): add missing urb->transfer_dma initialization
Yasushi reported, that his Microchip CAN Analyzer stopped working
since commit
91c02557174b ("can: mcba_usb: fix memory leak in
mcba_usb"). The problem was in missing urb->transfer_dma
initialization.
In my previous patch to this driver I refactored mcba_usb_start() code
to avoid leaking usb coherent buffers. To archive it, I passed local
stack variable to usb_alloc_coherent() and then saved it to private
array to correctly free all coherent buffers on ->close() call. But I
forgot to initialize urb->transfer_dma with variable passed to
usb_alloc_coherent().
All of this was causing device to not work, since dma addr 0 is not
valid and following log can be found on bug report page, which points
exactly to problem described above.
| DMAR: [DMA Write] Request device [00:14.0] PASID
ffffffff fault addr 0 [fault reason 05] PTE Write access is not set
Fixes:
91c02557174b ("can: mcba_usb: fix memory leak in mcba_usb")
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=990850
Link: https://lore.kernel.org/r/20210725103630.23864-1-paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: Yasushi SHOJI <yasushi.shoji@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Yasushi SHOJI <yashi@spacecubics.com>
[mkl: fixed typos in commit message - thanks Yasushi SHOJI]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Dan Carpenter [Thu, 29 Jul 2021 14:12:46 +0000 (17:12 +0300)]
can: hi311x: fix a signedness bug in hi3110_cmd()
The hi3110_cmd() is supposed to return zero on success and negative
error codes on failure, but it was accidentally declared as a u8 when
it needs to be an int type.
Fixes:
57e83fb9b746 ("can: hi311x: Add Holt HI-311x CAN driver")
Link: https://lore.kernel.org/r/20210729141246.GA1267@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Mon, 26 Jul 2021 09:26:44 +0000 (11:26 +0200)]
MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver
This patch adds Yasushi SHOJI as a reviewer for the Microchip CAN BUS
Analyzer Tool driver.
Link: https://lore.kernel.org/r/20210726111619.1023991-1-mkl@pengutronix.de
Acked-by: Yasushi SHOJI <yashi@spacecubics.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Linus Torvalds [Fri, 30 Jul 2021 05:10:05 +0000 (22:10 -0700)]
Merge tag 'drm-fixes-2021-07-30' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular drm fixes pull, seems about the right size, lots of small
fixes across the board, mostly amdgpu, but msm and i915 are in there
along with panel and ttm.
amdgpu:
- Fix resource leak in an error path
- Avoid stack contents exposure in error path
- pmops check fix for S0ix vs S3
- DCN 2.1 display fixes
- DCN 2.0 display fix
- Backlight control fix for laptops with HDR panels
- Maintainers updates
i915:
- Fix vbt port mask
- Fix around reading the right DSC disable fuse in display_ver 10
- Split display version 9 and 10 in intel_setup_outputs
msm:
- iommu fault display fix
- misc dp compliance fixes
- dpu reg sizing fix
panel:
- Fix bpc for ytc700tlag_05_201c
ttm:
- debugfs init fixes"
* tag 'drm-fixes-2021-07-30' of git://anongit.freedesktop.org/drm/drm:
maintainers: add bugs and chat URLs for amdgpu
drm/amdgpu/display: only enable aux backlight control for OLED panels
drm/amd/display: ensure dentist display clock update finished in DCN20
drm/amd/display: Add missing DCN21 IP parameter
drm/amd/display: Guard DST_Y_PREFETCH register overflow in DCN21
drm/amdgpu: Check pmops for desired suspend state
drm/msm/dp: Initialize dp->aux->drm_dev before registration
drm/msm/dp: signal audio plugged change at dp_pm_resume
drm/msm/dp: Initialize the INTF_CONFIG register
drm/msm/dp: use dp_ctrl_off_link_stream during PHY compliance test run
drm/msm: Fix display fault handling
drm/msm/dpu: Fix sm8250_mdp register length
drm/amdgpu: Avoid printing of stack contents on firmware load error
drm/amdgpu: Fix resource leak on probe error path
drm/i915/display: split DISPLAY_VER 9 and 10 in intel_setup_outputs()
drm/i915: fix not reading DSC disable fuse in GLK
drm/i915/bios: Fix ports mask
drm/panel: panel-simple: Fix proper bpc for ytc700tlag_05_201c
drm/ttm: Initialize debugfs from ttm_global_init()
Linus Torvalds [Fri, 30 Jul 2021 04:03:47 +0000 (21:03 -0700)]
Merge tag 'fallthrough-fixes-clang-5.14-rc4' of git://git./linux/kernel/git/gustavoars/linux
Pull fallthrough fixes from Gustavo Silva:
"Fix some fall-through warnings when building with Clang and
'-Wimplicit-fallthrough' on ARM"
* tag 'fallthrough-fixes-clang-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
scsi: fas216: Fix fall-through warning for Clang
scsi: acornscsi: Fix fall-through warning for clang
ARM: riscpc: Fix fall-through warning for Clang
Linus Torvalds [Fri, 30 Jul 2021 03:57:56 +0000 (20:57 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mattst88/alpha
Pull alpha updates from Matt Turner:
"They're mostly small janitorial fixes but there's also more important
ones:
- drop the alpha-specific x86 binary loader (David Hildenbrand)
- regression fix for at least Marvel platforms (Mike Rapoport)
- fix for a scary-looking typo (Zheng Yongjun)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
alpha: register early reserved memory in memblock
alpha: fix spelling mistakes
alpha: Remove space between * and parameter name
alpha: fp_emul: avoid init/cleanup_module names
alpha: Add syscall_get_return_value()
binfmt: remove support for em86 (alpha only)
alpha: fix typos in a comment
alpha: defconfig: add necessary configs for boot testing
alpha: Send stop IPI to send to online CPUs
alpha: convert comma to semicolon
alpha: remove undef inline in compiler.h
alpha: Kconfig: Replace HTTP links with HTTPS ones
alpha: __udiv_qrnnd should be exported
Gustavo A. R. Silva [Mon, 26 Jul 2021 20:46:47 +0000 (15:46 -0500)]
scsi: fas216: Fix fall-through warning for Clang
Fix the following fallthrough warning (on ARM):
drivers/scsi/arm/fas216.c:1379:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
default:
^
drivers/scsi/arm/fas216.c:1379:2: note: insert 'break;' to avoid fall-through
default:
^
break;
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202107260355.bF00i5bi-lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Mon, 26 Jul 2021 20:33:53 +0000 (15:33 -0500)]
scsi: acornscsi: Fix fall-through warning for clang
Fix the following fallthrough warning (on ARM):
drivers/scsi/arm/acornscsi.c:2651:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
case res_success:
^
drivers/scsi/arm/acornscsi.c:2651:2: note: insert '__attribute__((fallthrough));' to silence this warning
case res_success:
^
__attribute__((fallthrough));
drivers/scsi/arm/acornscsi.c:2651:2: note: insert 'break;' to avoid fall-through
case res_success:
^
break;
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202107260355.bF00i5bi-lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Gustavo A. R. Silva [Mon, 26 Jul 2021 20:06:22 +0000 (15:06 -0500)]
ARM: riscpc: Fix fall-through warning for Clang
Fix the following fallthrough warning:
arch/arm/mach-rpc/riscpc.c:52:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
default:
^
arch/arm/mach-rpc/riscpc.c:52:2: note: insert 'break;' to avoid fall-through
default:
^
break;
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202107260355.bF00i5bi-lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Linus Torvalds [Thu, 29 Jul 2021 16:42:09 +0000 (09:42 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix MTE shared page detection
- Enable selftest's use of PMU registers when asked to
s390:
- restore 5.13 debugfs names
x86:
- fix sizes for vcpu-id indexed arrays
- fixes for AMD virtualized LAPIC (AVIC)
- other small bugfixes
Generic:
- access tracking performance test
- dirty_log_perf_test command line parsing fix
- Fix selftest use of obsolete pthread_yield() in favour of
sched_yield()
- use cpu_relax when halt polling
- fixed missing KVM_CLEAR_DIRTY_LOG compat ioctl"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: add missing compat KVM_CLEAR_DIRTY_LOG
KVM: use cpu_relax when halt polling
KVM: SVM: use vmcb01 in svm_refresh_apicv_exec_ctrl
KVM: SVM: tweak warning about enabled AVIC on nested entry
KVM: SVM: svm_set_vintr don't warn if AVIC is active but is about to be deactivated
KVM: s390: restore old debugfs names
KVM: SVM: delay svm_vcpu_init_msrpm after svm->vmcb is initialized
KVM: selftests: Introduce access_tracking_perf_test
KVM: selftests: Fix missing break in dirty_log_perf_test arg parsing
x86/kvm: fix vcpu-id indexed array sizes
KVM: x86: Check the right feature bit for MSR_KVM_ASYNC_PF_ACK access
docs: virt: kvm: api.rst: replace some characters
KVM: Documentation: Fix KVM_CAP_ENFORCE_PV_FEATURE_CPUID name
KVM: nSVM: Swap the parameter order for svm_copy_vmrun_state()/svm_copy_vmloadsave_state()
KVM: nSVM: Rename nested_svm_vmloadsave() to svm_copy_vmloadsave_state()
KVM: arm64: selftests: get-reg-list: actually enable pmu regs in pmu sublist
KVM: selftests: change pthread_yield to sched_yield
KVM: arm64: Fix detection of shared VMAs on guest fault
Linus Torvalds [Thu, 29 Jul 2021 16:28:24 +0000 (09:28 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/gerg/m68knommu
Pull m68knommu fix from Greg Ungerer:
"A single compile time fix"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k/coldfire: change pll var. to clk_pll
Darrick J. Wong [Mon, 26 Jul 2021 23:43:17 +0000 (16:43 -0700)]
xfs: prevent spoofing of rtbitmap blocks when recovering buffers
While reviewing the buffer item recovery code, the thought occurred to
me: in V5 filesystems we use log sequence number (LSN) tracking to avoid
replaying older metadata updates against newer log items. However, we
use the magic number of the ondisk buffer to find the LSN of the ondisk
metadata, which means that if an attacker can control the layout of the
realtime device precisely enough that the start of an rt bitmap block
matches the magic and UUID of some other kind of block, they can control
the purported LSN of that spoofed block and thereby break log replay.
Since realtime bitmap and summary blocks don't have headers at all, we
have no way to tell if a block really should be replayed. The best we
can do is replay unconditionally and hope for the best.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Dave Chinner [Thu, 29 Jul 2021 00:14:11 +0000 (17:14 -0700)]
xfs: limit iclog tail updates
From the department of "generic/482 keeps on giving", we bring you
another tail update race condition:
iclog:
S1 C1
+-----------------------+-----------------------+
S2 EOIC
Two checkpoints in a single iclog. One is complete, the other just
contains the start record and overruns into a new iclog.
Timeline:
Before S1: Cache flush, log tail = X
At S1: Metadata stable, write start record and checkpoint
At C1: Write commit record, set NEED_FUA
Single iclog checkpoint, so no need for NEED_FLUSH
Log tail still = X, so no need for NEED_FLUSH
After C1,
Before S2: Cache flush, log tail = X
At S2: Metadata stable, write start record and checkpoint
After S2: Log tail moves to X+1
At EOIC: End of iclog, more journal data to write
Releases iclog
Not a commit iclog, so no need for NEED_FLUSH
Writes log tail X+1 into iclog.
At this point, the iclog has tail X+1 and NEED_FUA set. There has
been no cache flush for the metadata between X and X+1, and the
iclog writes the new tail permanently to the log. THis is sufficient
to violate on disk metadata/journal ordering.
We have two options here. The first is to detect this case in some
manner and ensure that the partial checkpoint write sets NEED_FLUSH
when the iclog is already marked NEED_FUA and the log tail changes.
This seems somewhat fragile and quite complex to get right, and it
doesn't actually make it obvious what underlying problem it is
actually addressing from reading the code.
The second option seems much cleaner to me, because it is derived
directly from the requirements of the C1 commit record in the iclog.
That is, when we write this commit record to the iclog, we've
guaranteed that the metadata/data ordering is correct for tail
update purposes. Hence if we only write the log tail into the iclog
for the *first* commit record rather than the log tail at the last
release, we guarantee that the log tail does not move past where the
the first commit record in the log expects it to be.
IOWs, taking the first option means that replay of C1 becomes
dependent on future operations doing the right thing, not just the
C1 checkpoint itself doing the right thing. This makes log recovery
almost impossible to reason about because now we have to take into
account what might or might not have happened in the future when
looking at checkpoints in the log rather than just having to
reconstruct the past...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Dave Chinner [Tue, 27 Jul 2021 23:23:50 +0000 (16:23 -0700)]
xfs: need to see iclog flags in tracing
Because I cannot tell if the NEED_FLUSH flag is being set correctly
by the log force and CIL push machinery without it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Dave Chinner [Tue, 27 Jul 2021 23:23:50 +0000 (16:23 -0700)]
xfs: Enforce attr3 buffer recovery order
From the department of "WTAF? How did we miss that!?"...
When we are recovering a buffer, the first thing we do is check the
buffer magic number and extract the LSN from the buffer. If the LSN
is older than the current LSN, we replay the modification to it. If
the metadata on disk is newer than the transaction in the log, we
skip it. This is a fundamental v5 filesystem metadata recovery
behaviour.
generic/482 failed with an attribute writeback failure during log
recovery. The write verifier caught the corruption before it got
written to disk, and the attr buffer dump looked like:
XFS (dm-3): Metadata corruption detected at xfs_attr3_leaf_verify+0x275/0x2e0, xfs_attr3_leaf block 0x19be8
XFS (dm-3): Unmount and run xfs_repair
XFS (dm-3): First 128 bytes of corrupted metadata buffer:
00000000: 00 00 00 00 00 00 00 00 3b ee 00 00 4d 2a 01 e1 ........;...M*..
00000010: 00 00 00 00 00 01 9b e8 00 00 00 01 00 00 05 38 ...............8
^^^^^^^^^^^^^^^^^^^^^^^
00000020: df 39 5e 51 58 ac 44 b6 8d c5 e7 10 44 09 bc 17 .9^QX.D.....D...
00000030: 00 00 00 00 00 02 00 83 00 03 00 cc 0f 24 01 00 .............$..
00000040: 00 68 0e bc 0f c8 00 10 00 00 00 00 00 00 00 00 .h..............
00000050: 00 00 3c 31 0f 24 01 00 00 00 3c 32 0f 88 01 00 ..<1.$....<2....
00000060: 00 00 3c 33 0f d8 01 00 00 00 00 00 00 00 00 00 ..<3............
00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
.....
The highlighted bytes are the LSN that was replayed into the
buffer: 0x100000538. This is cycle 1, block 0x538. Prior to replay,
that block on disk looks like this:
$ sudo xfs_db -c "fsb 0x417d" -c "type attr3" -c p /dev/mapper/thin-vol
hdr.info.hdr.forw = 0
hdr.info.hdr.back = 0
hdr.info.hdr.magic = 0x3bee
hdr.info.crc = 0xb5af0bc6 (correct)
hdr.info.bno = 105448
hdr.info.lsn = 0x100000900
^^^^^^^^^^^
hdr.info.uuid =
df395e51-58ac-44b6-8dc5-
e7104409bc17
hdr.info.owner = 131203
hdr.count = 2
hdr.usedbytes = 120
hdr.firstused = 3796
hdr.holes = 1
hdr.freemap[0-2] = [base,size]
Note the LSN stamped into the buffer on disk: 1/0x900. The version
on disk is much newer than the log transaction that was being
replayed. That's a bug, and should -never- happen.
So I immediately went to look at xlog_recover_get_buf_lsn() to check
that we handled the LSN correctly. I was wondering if there was a
similar "two commits with the same start LSN skips the second
replay" problem with buffers. I didn't get that far, because I found
a much more basic, rudimentary bug: xlog_recover_get_buf_lsn()
doesn't recognise buffers with XFS_ATTR3_LEAF_MAGIC set in them!!!
IOWs, attr3 leaf buffers fall through the magic number checks
unrecognised, so trigger the "recover immediately" behaviour instead
of undergoing an LSN check. IOWs, we incorrectly replay ATTR3 leaf
buffers and that causes silent on disk corruption of inode attribute
forks and potentially other things....
Git history shows this is *another* zero day bug, this time
introduced in commit
50d5c8d8e938 ("xfs: check LSN ordering for v5
superblocks during recovery") which failed to handle the attr3 leaf
buffers in recovery. And we've failed to handle them ever since...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Dave Chinner [Tue, 27 Jul 2021 23:23:49 +0000 (16:23 -0700)]
xfs: logging the on disk inode LSN can make it go backwards
When we log an inode, we format the "log inode" core and set an LSN
in that inode core. We do that via xfs_inode_item_format_core(),
which calls:
xfs_inode_to_log_dinode(ip, dic, ip->i_itemp->ili_item.li_lsn);
to format the log inode. It writes the LSN from the inode item into
the log inode, and if recovery decides the inode item needs to be
replayed, it recovers the log inode LSN field and writes it into the
on disk inode LSN field.
Now this might seem like a reasonable thing to do, but it is wrong
on multiple levels. Firstly, if the item is not yet in the AIL,
item->li_lsn is zero. i.e. the first time the inode it is logged and
formatted, the LSN we write into the log inode will be zero. If we
only log it once, recovery will run and can write this zero LSN into
the inode.
This means that the next time the inode is logged and log recovery
runs, it will *always* replay changes to the inode regardless of
whether the inode is newer on disk than the version in the log and
that violates the entire purpose of recording the LSN in the inode
at writeback time (i.e. to stop it going backwards in time on disk
during recovery).
Secondly, if we commit the CIL to the journal so the inode item
moves to the AIL, and then relog the inode, the LSN that gets
stamped into the log inode will be the LSN of the inode's current
location in the AIL, not it's age on disk. And it's not the LSN that
will be associated with the current change. That means when log
recovery replays this inode item, the LSN that ends up on disk is
the LSN for the previous changes in the log, not the current
changes being replayed. IOWs, after recovery the LSN on disk is not
in sync with the LSN of the modifications that were replayed into
the inode. This, again, violates the recovery ordering semantics
that on-disk writeback LSNs provide.
Hence the inode LSN in the log dinode is -always- invalid.
Thirdly, recovery actually has the LSN of the log transaction it is
replaying right at hand - it uses it to determine if it should
replay the inode by comparing it to the on-disk inode's LSN. But it
doesn't use that LSN to stamp the LSN into the inode which will be
written back when the transaction is fully replayed. It uses the one
in the log dinode, which we know is always going to be incorrect.
Looking back at the change history, the inode logging was broken by
commit
93f958f9c41f ("xfs: cull unnecessary icdinode fields") way
back in 2016 by a stupid idiot who thought he knew how this code
worked. i.e. me. That commit replaced an in memory di_lsn field that
was updated only at inode writeback time from the inode item.li_lsn
value - and hence always contained the same LSN that appeared in the
on-disk inode - with a read of the inode item LSN at inode format
time. CLearly these are not the same thing.
Before
93f958f9c41f, the log recovery behaviour was irrelevant,
because the LSN in the log inode always matched the on-disk LSN at
the time the inode was logged, hence recovery of the transaction
would never make the on-disk LSN in the inode go backwards or get
out of sync.
A symptom of the problem is this, caught from a failure of
generic/482. Before log recovery, the inode has been allocated but
never used:
xfs_db> inode 393388
xfs_db> p
core.magic = 0x494e
core.mode = 0
....
v3.crc = 0x99126961 (correct)
v3.change_count = 0
v3.lsn = 0
v3.flags2 = 0
v3.cowextsize = 0
v3.crtime.sec = Thu Jan 1 10:00:00 1970
v3.crtime.nsec = 0
After log recovery:
xfs_db> p
core.magic = 0x494e
core.mode = 020444
....
v3.crc = 0x23e68f23 (correct)
v3.change_count = 2
v3.lsn = 0
v3.flags2 = 0
v3.cowextsize = 0
v3.crtime.sec = Thu Jul 22 17:03:03 2021
v3.crtime.nsec =
751000000
...
You can see that the LSN of the on-disk inode is 0, even though it
clearly has been written to disk. I point out this inode, because
the generic/482 failure occurred because several adjacent inodes in
this specific inode cluster were not replayed correctly and still
appeared to be zero on disk when all the other metadata (inobt,
finobt, directories, etc) indicated they should be allocated and
written back.
The fix for this is two-fold. The first is that we need to either
revert the LSN changes in
93f958f9c41f or stop logging the inode LSN
altogether. If we do the former, log recovery does not need to
change but we add 8 bytes of memory per inode to store what is
largely a write-only inode field. If we do the latter, log recovery
needs to stamp the on-disk inode in the same manner that inode
writeback does.
I prefer the latter, because we shouldn't really be trying to log
and replay changes to the on disk LSN as the on-disk value is the
canonical source of the on-disk version of the inode. It also
matches the way we recover buffer items - we create a buf_log_item
that carries the current recovery transaction LSN that gets stamped
into the buffer by the write verifier when it gets written back
when the transaction is fully recovered.
However, this might break log recovery on older kernels even more,
so I'm going to simply ignore the logged value in recovery and stamp
the on-disk inode with the LSN of the transaction being recovered
that will trigger writeback on transaction recovery completion. This
will ensure that the on-disk inode LSN always reflects the LSN of
the last change that was written to disk, regardless of whether it
comes from log recovery or runtime writeback.
Fixes:
93f958f9c41f ("xfs: cull unnecessary icdinode fields")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Dave Chinner [Tue, 27 Jul 2021 23:23:49 +0000 (16:23 -0700)]
xfs: avoid unnecessary waits in xfs_log_force_lsn()
Before waiting on a iclog in xfs_log_force_lsn(), we don't check to
see if the iclog has already been completed and the contents on
stable storage. We check for completed iclogs in xfs_log_force(), so
we should do the same thing for xfs_log_force_lsn().
This fixed some random up-to-30s pauses seen in unmounting
filesystems in some tests. A log force ends up waiting on completed
iclog, and that doesn't then get flushed (and hence the log force
get completed) until the background log worker issues a log force
that flushes the iclog in question. Then the unmount unblocks and
continues.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Dave Chinner [Tue, 27 Jul 2021 23:23:49 +0000 (16:23 -0700)]
xfs: log forces imply data device cache flushes
After fixing the tail_lsn vs cache flush race, generic/482 continued
to fail in a similar way where cache flushes were missing before
iclog FUA writes. Tracing of iclog state changes during the fsstress
workload portion of the test (via xlog_iclog* events) indicated that
iclog writes were coming from two sources - CIL pushes and log
forces (due to fsync/O_SYNC operations). All of the cases where a
recovery problem was triggered indicated that the log force was the
source of the iclog write that was not preceeded by a cache flush.
This was an oversight in the modifications made in commit
eef983ffeae7 ("xfs: journal IO cache flush reductions"). Log forces
for fsync imply a data device cache flush has been issued if an
iclog was flushed to disk and is indicated to the caller via the
log_flushed parameter so they can elide the device cache flush if
the journal issued one.
The change in
eef983ffeae7 results in iclogs only issuing a cache
flush if XLOG_ICL_NEED_FLUSH is set on the iclog, but this was not
added to the iclogs that the log force code flushes to disk. Hence
log forces are no longer guaranteeing that a cache flush is issued,
hence opening up a potential on-disk ordering failure.
Log forces should also set XLOG_ICL_NEED_FUA as well to ensure that
the actual iclogs it forces to the journal are also on stable
storage before it returns to the caller.
This patch introduces the xlog_force_iclog() helper function to
encapsulate the process of taking a reference to an iclog, switching
its state if WANT_SYNC and flushing it to stable storage correctly.
Both xfs_log_force() and xfs_log_force_lsn() are converted to use
it, as is xlog_unmount_write() which has an elaborate method of
doing exactly the same "write this iclog to stable storage"
operation.
Further, if the log force code needs to wait on a iclog in the
WANT_SYNC state, it needs to ensure that iclog also results in a
cache flush being issued. This covers the case where the iclog
contains the commit record of the CIL flush that the log force
triggered, but it hasn't been written yet because there is still an
active reference to the iclog.
Note: this whole cache flush whack-a-mole patch is a result of log
forces still being iclog state centric rather than being CIL
sequence centric. Most of this nasty code will go away in future
when log forces are converted to wait on CIL sequence push
completion rather than iclog completion. With the CIL push algorithm
guaranteeing that the CIL checkpoint is fully on stable storage when
it completes, we no longer need to iterate iclogs and push them to
ensure a CIL sequence push has completed and so all this nasty iclog
iteration and flushing code will go away.
Fixes:
eef983ffeae7 ("xfs: journal IO cache flush reductions")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Dave Chinner [Tue, 27 Jul 2021 23:23:48 +0000 (16:23 -0700)]
xfs: factor out forced iclog flushes
We force iclogs in several places - we need them all to have the
same cache flush semantics, so start by factoring out the iclog
force into a common helper.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Dave Chinner [Tue, 27 Jul 2021 23:23:48 +0000 (16:23 -0700)]
xfs: fix ordering violation between cache flushes and tail updates
There is a race between the new CIL async data device metadata IO
completion cache flush and the log tail in the iclog the flush
covers being updated. This can be seen by repeating generic/482 in a
loop and eventually log recovery fails with a failures such as this:
XFS (dm-3): Starting recovery (logdev: internal)
XFS (dm-3): bad inode magic/vsn daddr 228352 #0 (magic=0)
XFS (dm-3): Metadata corruption detected at xfs_inode_buf_verify+0x180/0x190, xfs_inode block 0x37c00 xfs_inode_buf_verify
XFS (dm-3): Unmount and run xfs_repair
XFS (dm-3): First 128 bytes of corrupted metadata buffer:
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
XFS (dm-3): metadata I/O error in "xlog_recover_items_pass2+0x55/0xc0" at daddr 0x37c00 len 32 error 117
Analysis of the logwrite replay shows that there were no writes to
the data device between the FUA @ write 124 and the FUA at write @
125, but log recovery @ 125 failed. The difference was the one log
write @ 125 moved the tail of the log forwards from (1,8) to (1,32)
and so the inode create intent in (1,8) was not replayed and so the
inode cluster was zero on disk when replay of the first inode item
in (1,32) was attempted.
What this meant was that the journal write that occurred at @ 125
did not ensure that metadata completed before the iclog was written
was correctly on stable storage. The tail of the log moved forward,
so IO must have been completed between the two iclog writes. This
means that there is a race condition between the unconditional async
cache flush in the CIL push work and the tail LSN that is written to
the iclog. This happens like so:
CIL push work AIL push work
------------- -------------
Add to committing list
start async data dev cache flush
.....
<flush completes>
<all writes to old tail lsn are stable>
xlog_write
.... push inode create buffer
<start IO>
.....
xlog_write(commit record)
.... <IO completes>
log tail moves
xlog_assign_tail_lsn()
start_lsn == commit_lsn
<no iclog preflush!>
xlog_state_release_iclog
__xlog_state_release_iclog()
<writes *new* tail_lsn into iclog>
xlog_sync()
....
submit_bio()
<tail in log moves forward without flushing written metadata>
Essentially, this can only occur if the commit iclog is issued
without a cache flush. If the iclog bio is submitted with
REQ_PREFLUSH, then it will guarantee that all the completed IO is
one stable storage before the iclog bio with the new tail LSN in it
is written to the log.
IOWs, the tail lsn that is written to the iclog needs to be sampled
*before* we issue the cache flush that guarantees all IO up to that
LSN has been completed.
To fix this without giving up the performance advantage of the
flush/FUA optimisations (e.g. g/482 runtime halves with 5.14-rc1
compared to 5.13), we need to ensure that we always issue a cache
flush if the tail LSN changes between the initial async flush and
the commit record being written. THis requires sampling the tail_lsn
before we start the flush, and then passing the sampled tail LSN to
xlog_state_release_iclog() so it can determine if the the tail LSN
has changed while writing the checkpoint. If the tail LSN has
changed, then it needs to set the NEED_FLUSH flag on the iclog and
we'll issue another cache flush before writing the iclog.
Fixes:
eef983ffeae7 ("xfs: journal IO cache flush reductions")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Dave Chinner [Tue, 27 Jul 2021 23:23:47 +0000 (16:23 -0700)]
xfs: fold __xlog_state_release_iclog into xlog_state_release_iclog
Fold __xlog_state_release_iclog into its only caller to prepare
make an upcoming fix easier.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[hch: split from a larger patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Dave Chinner [Tue, 27 Jul 2021 23:23:47 +0000 (16:23 -0700)]
xfs: external logs need to flush data device
The recent journal flush/FUA changes replaced the flushing of the
data device on every iclog write with an up-front async data device
cache flush. Unfortunately, the assumption of which this was based
on has been proven incorrect by the flush vs log tail update
ordering issue. As the fix for that issue uses the
XLOG_ICL_NEED_FLUSH flag to indicate that data device needs a cache
flush, we now need to (once again) ensure that an iclog write to
external logs that need a cache flush to be issued actually issue a
cache flush to the data device as well as the log device.
Fixes:
eef983ffeae7 ("xfs: journal IO cache flush reductions")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Dave Chinner [Tue, 27 Jul 2021 23:23:46 +0000 (16:23 -0700)]
xfs: flush data dev on external log write
We incorrectly flush the log device instead of the data device when
trying to ensure metadata is correctly on disk before writing the
unmount record.
Fixes:
eef983ffeae7 ("xfs: journal IO cache flush reductions")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Michael Ellerman [Thu, 29 Jul 2021 12:56:36 +0000 (22:56 +1000)]
powerpc/vdso: Don't use r30 to avoid breaking Go lang
The Go runtime uses r30 for some special value called 'g'. It assumes
that value will remain unchanged even when calling VDSO functions.
Although r30 is non-volatile across function calls, the callee is free
to use it, as long as the callee saves the value and restores it before
returning.
It used to be true by accident that the VDSO didn't use r30, because the
VDSO was hand-written asm. When we switched to building the VDSO from C
the compiler started using r30, at least in some builds, leading to
crashes in Go. eg:
~/go/src$ ./all.bash
Building Go cmd/dist using /usr/lib/go-1.16. (go1.16.2 linux/ppc64le)
Building Go toolchain1 using /usr/lib/go-1.16.
go build os/exec: /usr/lib/go-1.16/pkg/tool/linux_ppc64le/compile: signal: segmentation fault
go build reflect: /usr/lib/go-1.16/pkg/tool/linux_ppc64le/compile: signal: segmentation fault
go tool dist: FAILED: /usr/lib/go-1.16/bin/go install -gcflags=-l -tags=math_big_pure_go compiler_bootstrap bootstrap/cmd/...: exit status 1
There are patches in flight to fix Go[1], but until they are released
and widely deployed we can workaround it in the VDSO by avoiding use of
r30.
Note this only works with GCC, clang does not support -ffixed-rN.
1: https://go-review.googlesource.com/c/go/+/328110
Fixes:
ab037dd87a2f ("powerpc/vdso: Switch VDSO to generic C implementation.")
Cc: stable@vger.kernel.org # v5.11+
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729131244.2595519-1-mpe@ellerman.id.au
Srikar Dronamraju [Thu, 29 Jul 2021 06:04:49 +0000 (11:34 +0530)]
powerpc/pseries: Fix regression while building external modules
With commit
c9f3401313a5 ("powerpc: Always enable queued spinlocks for
64s, disable for others") CONFIG_PPC_QUEUED_SPINLOCKS is always
enabled on ppc64le, external modules that use spinlock APIs are
failing.
ERROR: modpost: GPL-incompatible module XXX.ko uses GPL-only symbol 'shared_processor'
Before the above commit, modules were able to build without any
issues. Also this problem is not seen on other architectures. This
problem can be workaround if CONFIG_UNINLINE_SPIN_UNLOCK is enabled in
the config. However CONFIG_UNINLINE_SPIN_UNLOCK is not enabled by
default and only enabled in certain conditions like
CONFIG_DEBUG_SPINLOCKS is set in the kernel config.
#include <linux/module.h>
spinlock_t spLock;
static int __init spinlock_test_init(void)
{
spin_lock_init(&spLock);
spin_lock(&spLock);
spin_unlock(&spLock);
return 0;
}
static void __exit spinlock_test_exit(void)
{
printk("spinlock_test unloaded\n");
}
module_init(spinlock_test_init);
module_exit(spinlock_test_exit);
MODULE_DESCRIPTION ("spinlock_test");
MODULE_LICENSE ("non-GPL");
MODULE_AUTHOR ("Srikar Dronamraju");
Given that spin locks are one of the basic facilities for module code,
this effectively makes it impossible to build/load almost any non GPL
modules on ppc64le.
This was first reported at https://github.com/openzfs/zfs/issues/11172
Currently shared_processor is exported as GPL only symbol.
Fix this for parity with other architectures by exposing
shared_processor to non-GPL modules too.
Fixes:
14c73bd344da ("powerpc/vcpu: Assume dedicated processors as non-preempt")
Cc: stable@vger.kernel.org # v5.5+
Reported-by: marc.c.dionne@gmail.com
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729060449.292780-1-srikar@linux.vnet.ibm.com
David Sterba [Wed, 28 Jul 2021 16:00:24 +0000 (18:00 +0200)]
btrfs: calculate number of eb pages properly in csum_tree_block
Building with -Warray-bounds on systems with 64K pages there's a
warning:
fs/btrfs/disk-io.c: In function ‘csum_tree_block’:
fs/btrfs/disk-io.c:226:34: warning: array subscript 1 is above array bounds of ‘struct page *[1]’ [-Warray-bounds]
226 | kaddr = page_address(buf->pages[i]);
| ~~~~~~~~~~^~~
./include/linux/mm.h:1630:48: note: in definition of macro ‘page_address’
1630 | #define page_address(page) lowmem_page_address(page)
| ^~~~
In file included from fs/btrfs/ctree.h:32,
from fs/btrfs/disk-io.c:23:
fs/btrfs/extent_io.h:98:15: note: while referencing ‘pages’
98 | struct page *pages[1];
| ^~~~~
The compiler has no way to know that in that case the nodesize is exactly
PAGE_SIZE, so the resulting number of pages will be correct (1).
Let's use num_extent_pages that makes the case nodesize == PAGE_SIZE
explicitly 1.
Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Michael Zaidman [Thu, 29 Jul 2021 10:26:03 +0000 (13:26 +0300)]
HID: ft260: fix device removal due to USB disconnect
This commit fixes a functional regression introduced by the commit
82f09a637dd3
("HID: ft260: improve error handling of ft260_hid_feature_report_get()")
when upon USB disconnect, the FTDI FT260 i2c device is still available within
the /dev folder.
In my company's product, where the host USB to FT260 USB connection is
hard-wired in the PCB, the issue is not reproducible. To reproduce it, I used
the VirtualBox Ubuntu 20.04 VM and the UMFT260EV1A development module for the
FTDI FT260 chip:
Plug the UMFT260EV1A module into a USB port and attach it to VM.
The VM shows 2 i2c devices under the /dev:
michael@michael-VirtualBox:~$ ls /dev/i2c-*
/dev/i2c-0 /dev/i2c-1
The i2c-0 is not related to the FTDI FT260:
michael@michael-VirtualBox:~$ cat /sys/bus/i2c/devices/i2c-0/name
SMBus PIIX4 adapter at 4100
The i2c-1 is created by hid-ft260.ko:
michael@michael-VirtualBox:~$ cat /sys/bus/i2c/devices/i2c-1/name
FT260 usb-i2c bridge on hidraw1
Now, detach the FTDI FT260 USB device from VM. We expect the /dev/i2c-1
to disappear, but it's still here:
michael@michael-VirtualBox:~$ ls /dev/i2c-*
/dev/i2c-0 /dev/i2c-1
And the kernel log shows:
[ +0.001202] usb 2-2: USB disconnect, device number 3
[ +0.000109] ft260 0003:0403:6030.0002: failed to retrieve system status
[ +0.000316] ft260 0003:0403:6030.0003: failed to retrieve system status
It happens because the commit
82f09a637dd3 changed the ft260_get_system_config()
return logic. This caused the ft260_is_interface_enabled() to exit with error
upon the FT260 device USB disconnect, which in turn, aborted the ft260_remove()
before deleting the FT260 i2c device and cleaning its sysfs stuff.
This commit restores the FT260 USB removal functionality and improves the
ft260_is_interface_enabled() code to handle correctly all chip modes defined
by the device interface configuration pins DCNF0 and DCNF1.
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Acked-by: Aaron Jones (FTDI-UK) <aaron.jones@ftdichip.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Dave Airlie [Thu, 29 Jul 2021 07:20:29 +0000 (17:20 +1000)]
Merge tag 'amd-drm-fixes-5.14-2021-07-28' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.14-2021-07-28:
amdgpu:
- Fix resource leak in an error path
- Avoid stack contents exposure in error path
- pmops check fix for S0ix vs S3
- DCN 2.1 display fixes
- DCN 2.0 display fix
- Backlight control fix for laptops with HDR panels
- Maintainers updates
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729025817.4145-1-alexander.deucher@amd.com
Mike Rapoport [Tue, 27 Jul 2021 20:38:24 +0000 (23:38 +0300)]
alpha: register early reserved memory in memblock
The memory reserved by console/PALcode or non-volatile memory is not added
to memblock.memory.
Since commit
fa3354e4ea39 (mm: free_area_init: use maximal zone PFNs rather
than zone sizes) the initialization of the memory map relies on the
accuracy of memblock.memory to properly calculate zone sizes. The holes in
memblock.memory caused by absent regions reserved by the firmware cause
incorrect initialization of struct pages which leads to BUG() during the
initial page freeing:
BUG: Bad page state in process swapper pfn:2ffc53
page:
fffffc000ecf14c0 refcount:0 mapcount:1 mapping:
0000000000000000 index:0x0
flags: 0x0()
raw:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
raw:
0000000000000000 0000000000000000 0000000000000000 0000000000000000
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.7.0-03841-gfa3354e4ea39-dirty #26
fffffc0001b5bd68 fffffc0001b5be80 fffffc00011cd148 fffffc000ecf14c0
fffffc00019803df fffffc0001b5be80 fffffc00011ce340 fffffc000ecf14c0
0000000000000000 fffffc0001b5be80 fffffc0001b482c0 fffffc00027d6618
fffffc00027da7d0 00000000002ff97a 0000000000000000 fffffc0001b5be80
fffffc00011d1abc fffffc000ecf14c0 fffffc0002d00000 fffffc0001b5be80
fffffc0001b2350c 0000000000300000 fffffc0001b48298 fffffc0001b482c0
Trace:
[<
fffffc00011cd148>] bad_page+0x168/0x1b0
[<
fffffc00011ce340>] free_pcp_prepare+0x1e0/0x290
[<
fffffc00011d1abc>] free_unref_page+0x2c/0xa0
[<
fffffc00014ee5f0>] cmp_ex_sort+0x0/0x30
[<
fffffc00014ee5f0>] cmp_ex_sort+0x0/0x30
[<
fffffc000101001c>] _stext+0x1c/0x20
Fix this by registering the reserved ranges in memblock.memory.
Link: https://lore.kernel.org/lkml/20210726192311.uffqnanxw3ac5wwi@ivybridge
Fixes:
fa3354e4ea39 ("mm: free_area_init: use maximal zone PFNs rather than zone sizes")
Reported-by: Matt Turner <mattst88@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Dave Airlie [Thu, 29 Jul 2021 02:13:55 +0000 (12:13 +1000)]
Merge tag 'drm-intel-fixes-2021-07-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Display related fixes:
- Fix vbt port mask
- Fix around reading the right DSC disable fuse in display_ver 10
- Split display version 9 and 10 in intel_setup_outputs
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YQF63ruuE72x2T45@intel.com
Dave Airlie [Thu, 29 Jul 2021 02:09:28 +0000 (12:09 +1000)]
Merge tag 'drm-misc-fixes-2021-07-28' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* panel: Fix bpc for ytc700tlag_05_201c
* ttm: debugfs init fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YQFTESngqkeqzlhN@linux-uq9g.fritz.box
Dave Airlie [Thu, 29 Jul 2021 01:28:06 +0000 (11:28 +1000)]
Merge tag 'drm-msm-fixes-2021-07-27' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
A few fixes for v5.14, including a fix for a crash if display triggers
an iommu fault (which tends to happen at probe time on devices with
bootloader fw that leaves display enabled as kernel starts)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGubeV_uzWhsqp_+EmQmPcPatnqWOQnARoing2YvQOHbyg@mail.gmail.com
David S. Miller [Wed, 28 Jul 2021 23:53:32 +0000 (00:53 +0100)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2021-07-29
The following pull-request contains BPF updates for your *net* tree.
We've added 9 non-merge commits during the last 14 day(s) which contain
a total of 20 files changed, 446 insertions(+), 138 deletions(-).
The main changes are:
1) Fix UBSAN out-of-bounds splat for showing XDP link fdinfo, from Lorenz Bauer.
2) Fix insufficient Spectre v4 mitigation in BPF runtime, from Daniel Borkmann,
Piotr Krysiuk and Benedict Schlueter.
3) Batch of fixes for BPF sockmap found under stress testing, from John Fastabend.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Tue, 13 Jul 2021 08:18:31 +0000 (08:18 +0000)]
bpf: Fix leakage due to insufficient speculative store bypass mitigation
Spectre v4 gadgets make use of memory disambiguation, which is a set of
techniques that execute memory access instructions, that is, loads and
stores, out of program order; Intel's optimization manual, section 2.4.4.5:
A load instruction micro-op may depend on a preceding store. Many
microarchitectures block loads until all preceding store addresses are
known. The memory disambiguator predicts which loads will not depend on
any previous stores. When the disambiguator predicts that a load does
not have such a dependency, the load takes its data from the L1 data
cache. Eventually, the prediction is verified. If an actual conflict is
detected, the load and all succeeding instructions are re-executed.
af86ca4e3088 ("bpf: Prevent memory disambiguation attack") tried to mitigate
this attack by sanitizing the memory locations through preemptive "fast"
(low latency) stores of zero prior to the actual "slow" (high latency) store
of a pointer value such that upon dependency misprediction the CPU then
speculatively executes the load of the pointer value and retrieves the zero
value instead of the attacker controlled scalar value previously stored at
that location, meaning, subsequent access in the speculative domain is then
redirected to the "zero page".
The sanitized preemptive store of zero prior to the actual "slow" store is
done through a simple ST instruction based on r10 (frame pointer) with
relative offset to the stack location that the verifier has been tracking
on the original used register for STX, which does not have to be r10. Thus,
there are no memory dependencies for this store, since it's only using r10
and immediate constant of zero; hence
af86ca4e3088 /assumed/ a low latency
operation.
However, a recent attack demonstrated that this mitigation is not sufficient
since the preemptive store of zero could also be turned into a "slow" store
and is thus bypassed as well:
[...]
// r2 = oob address (e.g. scalar)
// r7 = pointer to map value
31: (7b) *(u64 *)(r10 -16) = r2
// r9 will remain "fast" register, r10 will become "slow" register below
32: (bf) r9 = r10
// JIT maps BPF reg to x86 reg:
// r9 -> r15 (callee saved)
// r10 -> rbp
// train store forward prediction to break dependency link between both r9
// and r10 by evicting them from the predictor's LRU table.
33: (61) r0 = *(u32 *)(r7 +24576)
34: (63) *(u32 *)(r7 +29696) = r0
35: (61) r0 = *(u32 *)(r7 +24580)
36: (63) *(u32 *)(r7 +29700) = r0
37: (61) r0 = *(u32 *)(r7 +24584)
38: (63) *(u32 *)(r7 +29704) = r0
39: (61) r0 = *(u32 *)(r7 +24588)
40: (63) *(u32 *)(r7 +29708) = r0
[...]
543: (61) r0 = *(u32 *)(r7 +25596)
544: (63) *(u32 *)(r7 +30716) = r0
// prepare call to bpf_ringbuf_output() helper. the latter will cause rbp
// to spill to stack memory while r13/r14/r15 (all callee saved regs) remain
// in hardware registers. rbp becomes slow due to push/pop latency. below is
// disasm of bpf_ringbuf_output() helper for better visual context:
//
//
ffffffff8117ee20: 41 54 push r12
//
ffffffff8117ee22: 55 push rbp
//
ffffffff8117ee23: 53 push rbx
//
ffffffff8117ee24: 48 f7 c1 fc ff ff ff test rcx,0xfffffffffffffffc
//
ffffffff8117ee2b: 0f 85 af 00 00 00 jne
ffffffff8117eee0 <-- jump taken
// [...]
//
ffffffff8117eee0: 49 c7 c4 ea ff ff ff mov r12,0xffffffffffffffea
//
ffffffff8117eee7: 5b pop rbx
//
ffffffff8117eee8: 5d pop rbp
//
ffffffff8117eee9: 4c 89 e0 mov rax,r12
//
ffffffff8117eeec: 41 5c pop r12
//
ffffffff8117eeee: c3 ret
545: (18) r1 = map[id:4]
547: (bf) r2 = r7
548: (b7) r3 = 0
549: (b7) r4 = 4
550: (85) call bpf_ringbuf_output#194288
// instruction 551 inserted by verifier \
551: (7a) *(u64 *)(r10 -16) = 0 | /both/ are now slow stores here
// storing map value pointer r7 at fp-16 | since value of r10 is "slow".
552: (7b) *(u64 *)(r10 -16) = r7 /
// following "fast" read to the same memory location, but due to dependency
// misprediction it will speculatively execute before insn 551/552 completes.
553: (79) r2 = *(u64 *)(r9 -16)
// in speculative domain contains attacker controlled r2. in non-speculative
// domain this contains r7, and thus accesses r7 +0 below.
554: (71) r3 = *(u8 *)(r2 +0)
// leak r3
As can be seen, the current speculative store bypass mitigation which the
verifier inserts at line 551 is insufficient since /both/, the write of
the zero sanitation as well as the map value pointer are a high latency
instruction due to prior memory access via push/pop of r10 (rbp) in contrast
to the low latency read in line 553 as r9 (r15) which stays in hardware
registers. Thus, architecturally, fp-16 is r7, however, microarchitecturally,
fp-16 can still be r2.
Initial thoughts to address this issue was to track spilled pointer loads
from stack and enforce their load via LDX through r10 as well so that /both/
the preemptive store of zero /as well as/ the load use the /same/ register
such that a dependency is created between the store and load. However, this
option is not sufficient either since it can be bypassed as well under
speculation. An updated attack with pointer spill/fills now _all_ based on
r10 would look as follows:
[...]
// r2 = oob address (e.g. scalar)
// r7 = pointer to map value
[...]
// longer store forward prediction training sequence than before.
2062: (61) r0 = *(u32 *)(r7 +25588)
2063: (63) *(u32 *)(r7 +30708) = r0
2064: (61) r0 = *(u32 *)(r7 +25592)
2065: (63) *(u32 *)(r7 +30712) = r0
2066: (61) r0 = *(u32 *)(r7 +25596)
2067: (63) *(u32 *)(r7 +30716) = r0
// store the speculative load address (scalar) this time after the store
// forward prediction training.
2068: (7b) *(u64 *)(r10 -16) = r2
// preoccupy the CPU store port by running sequence of dummy stores.
2069: (63) *(u32 *)(r7 +29696) = r0
2070: (63) *(u32 *)(r7 +29700) = r0
2071: (63) *(u32 *)(r7 +29704) = r0
2072: (63) *(u32 *)(r7 +29708) = r0
2073: (63) *(u32 *)(r7 +29712) = r0
2074: (63) *(u32 *)(r7 +29716) = r0
2075: (63) *(u32 *)(r7 +29720) = r0
2076: (63) *(u32 *)(r7 +29724) = r0
2077: (63) *(u32 *)(r7 +29728) = r0
2078: (63) *(u32 *)(r7 +29732) = r0
2079: (63) *(u32 *)(r7 +29736) = r0
2080: (63) *(u32 *)(r7 +29740) = r0
2081: (63) *(u32 *)(r7 +29744) = r0
2082: (63) *(u32 *)(r7 +29748) = r0
2083: (63) *(u32 *)(r7 +29752) = r0
2084: (63) *(u32 *)(r7 +29756) = r0
2085: (63) *(u32 *)(r7 +29760) = r0
2086: (63) *(u32 *)(r7 +29764) = r0
2087: (63) *(u32 *)(r7 +29768) = r0
2088: (63) *(u32 *)(r7 +29772) = r0
2089: (63) *(u32 *)(r7 +29776) = r0
2090: (63) *(u32 *)(r7 +29780) = r0
2091: (63) *(u32 *)(r7 +29784) = r0
2092: (63) *(u32 *)(r7 +29788) = r0
2093: (63) *(u32 *)(r7 +29792) = r0
2094: (63) *(u32 *)(r7 +29796) = r0
2095: (63) *(u32 *)(r7 +29800) = r0
2096: (63) *(u32 *)(r7 +29804) = r0
2097: (63) *(u32 *)(r7 +29808) = r0
2098: (63) *(u32 *)(r7 +29812) = r0
// overwrite scalar with dummy pointer; same as before, also including the
// sanitation store with 0 from the current mitigation by the verifier.
2099: (7a) *(u64 *)(r10 -16) = 0 | /both/ are now slow stores here
2100: (7b) *(u64 *)(r10 -16) = r7 | since store unit is still busy.
// load from stack intended to bypass stores.
2101: (79) r2 = *(u64 *)(r10 -16)
2102: (71) r3 = *(u8 *)(r2 +0)
// leak r3
[...]
Looking at the CPU microarchitecture, the scheduler might issue loads (such
as seen in line 2101) before stores (line 2099,2100) because the load execution
units become available while the store execution unit is still busy with the
sequence of dummy stores (line 2069-2098). And so the load may use the prior
stored scalar from r2 at address r10 -16 for speculation. The updated attack
may work less reliable on CPU microarchitectures where loads and stores share
execution resources.
This concludes that the sanitizing with zero stores from
af86ca4e3088 ("bpf:
Prevent memory disambiguation attack") is insufficient. Moreover, the detection
of stack reuse from
af86ca4e3088 where previously data (STACK_MISC) has been
written to a given stack slot where a pointer value is now to be stored does
not have sufficient coverage as precondition for the mitigation either; for
several reasons outlined as follows:
1) Stack content from prior program runs could still be preserved and is
therefore not "random", best example is to split a speculative store
bypass attack between tail calls, program A would prepare and store the
oob address at a given stack slot and then tail call into program B which
does the "slow" store of a pointer to the stack with subsequent "fast"
read. From program B PoV such stack slot type is STACK_INVALID, and
therefore also must be subject to mitigation.
2) The STACK_SPILL must not be coupled to register_is_const(&stack->spilled_ptr)
condition, for example, the previous content of that memory location could
also be a pointer to map or map value. Without the fix, a speculative
store bypass is not mitigated in such precondition and can then lead to
a type confusion in the speculative domain leaking kernel memory near
these pointer types.
While brainstorming on various alternative mitigation possibilities, we also
stumbled upon a retrospective from Chrome developers [0]:
[...] For variant 4, we implemented a mitigation to zero the unused memory
of the heap prior to allocation, which cost about 1% when done concurrently
and 4% for scavenging. Variant 4 defeats everything we could think of. We
explored more mitigations for variant 4 but the threat proved to be more
pervasive and dangerous than we anticipated. For example, stack slots used
by the register allocator in the optimizing compiler could be subject to
type confusion, leading to pointer crafting. Mitigating type confusion for
stack slots alone would have required a complete redesign of the backend of
the optimizing compiler, perhaps man years of work, without a guarantee of
completeness. [...]
From BPF side, the problem space is reduced, however, options are rather
limited. One idea that has been explored was to xor-obfuscate pointer spills
to the BPF stack:
[...]
// preoccupy the CPU store port by running sequence of dummy stores.
[...]
2106: (63) *(u32 *)(r7 +29796) = r0
2107: (63) *(u32 *)(r7 +29800) = r0
2108: (63) *(u32 *)(r7 +29804) = r0
2109: (63) *(u32 *)(r7 +29808) = r0
2110: (63) *(u32 *)(r7 +29812) = r0
// overwrite scalar with dummy pointer; xored with random 'secret' value
// of
943576462 before store ...
2111: (b4) w11 =
943576462
2112: (af) r11 ^= r7
2113: (7b) *(u64 *)(r10 -16) = r11
2114: (79) r11 = *(u64 *)(r10 -16)
2115: (b4) w2 =
943576462
2116: (af) r2 ^= r11
// ... and restored with the same 'secret' value with the help of AX reg.
2117: (71) r3 = *(u8 *)(r2 +0)
[...]
While the above would not prevent speculation, it would make data leakage
infeasible by directing it to random locations. In order to be effective
and prevent type confusion under speculation, such random secret would have
to be regenerated for each store. The additional complexity involved for a
tracking mechanism that prevents jumps such that restoring spilled pointers
would not get corrupted is not worth the gain for unprivileged. Hence, the
fix in here eventually opted for emitting a non-public BPF_ST | BPF_NOSPEC
instruction which the x86 JIT translates into a lfence opcode. Inserting the
latter in between the store and load instruction is one of the mitigations
options [1]. The x86 instruction manual notes:
[...] An LFENCE that follows an instruction that stores to memory might
complete before the data being stored have become globally visible. [...]
The latter meaning that the preceding store instruction finished execution
and the store is at minimum guaranteed to be in the CPU's store queue, but
it's not guaranteed to be in that CPU's L1 cache at that point (globally
visible). The latter would only be guaranteed via sfence. So the load which
is guaranteed to execute after the lfence for that local CPU would have to
rely on store-to-load forwarding. [2], in section 2.3 on store buffers says:
[...] For every store operation that is added to the ROB, an entry is
allocated in the store buffer. This entry requires both the virtual and
physical address of the target. Only if there is no free entry in the store
buffer, the frontend stalls until there is an empty slot available in the
store buffer again. Otherwise, the CPU can immediately continue adding
subsequent instructions to the ROB and execute them out of order. On Intel
CPUs, the store buffer has up to 56 entries. [...]
One small upside on the fix is that it lifts constraints from
af86ca4e3088
where the sanitize_stack_off relative to r10 must be the same when coming
from different paths. The BPF_ST | BPF_NOSPEC gets emitted after a BPF_STX
or BPF_ST instruction. This happens either when we store a pointer or data
value to the BPF stack for the first time, or upon later pointer spills.
The former needs to be enforced since otherwise stale stack data could be
leaked under speculation as outlined earlier. For non-x86 JITs the BPF_ST |
BPF_NOSPEC mapping is currently optimized away, but others could emit a
speculation barrier as well if necessary. For real-world unprivileged
programs e.g. generated by LLVM, pointer spill/fill is only generated upon
register pressure and LLVM only tries to do that for pointers which are not
used often. The program main impact will be the initial BPF_ST | BPF_NOSPEC
sanitation for the STACK_INVALID case when the first write to a stack slot
occurs e.g. upon map lookup. In future we might refine ways to mitigate
the latter cost.
[0] https://arxiv.org/pdf/1902.05178.pdf
[1] https://msrc-blog.microsoft.com/2018/05/21/analysis-and-mitigation-of-speculative-store-bypass-cve-2018-3639/
[2] https://arxiv.org/pdf/1905.05725.pdf
Fixes:
af86ca4e3088 ("bpf: Prevent memory disambiguation attack")
Fixes:
f7cf25b2026d ("bpf: track spill/fill of constants")
Co-developed-by: Piotr Krysiuk <piotras@gmail.com>
Co-developed-by: Benedict Schlueter <benedict.schlueter@rub.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Signed-off-by: Benedict Schlueter <benedict.schlueter@rub.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Tue, 13 Jul 2021 08:18:31 +0000 (08:18 +0000)]
bpf: Introduce BPF nospec instruction for mitigating Spectre v4
In case of JITs, each of the JIT backends compiles the BPF nospec instruction
/either/ to a machine instruction which emits a speculation barrier /or/ to
/no/ machine instruction in case the underlying architecture is not affected
by Speculative Store Bypass or has different mitigations in place already.
This covers both x86 and (implicitly) arm64: In case of x86, we use 'lfence'
instruction for mitigation. In case of arm64, we rely on the firmware mitigation
as controlled via the ssbd kernel parameter. Whenever the mitigation is enabled,
it works for all of the kernel code with no need to provide any additional
instructions here (hence only comment in arm64 JIT). Other archs can follow
as needed. The BPF nospec instruction is specifically targeting Spectre v4
since i) we don't use a serialization barrier for the Spectre v1 case, and
ii) mitigation instructions for v1 and v4 might be different on some archs.
The BPF nospec is required for a future commit, where the BPF verifier does
annotate intermediate BPF programs with speculation barriers.
Co-developed-by: Piotr Krysiuk <piotras@gmail.com>
Co-developed-by: Benedict Schlueter <benedict.schlueter@rub.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Signed-off-by: Benedict Schlueter <benedict.schlueter@rub.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Ronnie Sahlberg [Wed, 28 Jul 2021 06:38:29 +0000 (16:38 +1000)]
cifs: add missing parsing of backupuid
We lost parsing of backupuid in the switch to new mount API.
Add it back.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: <stable@vger.kernel.org> # v5.11+
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Wed, 28 Jul 2021 17:38:38 +0000 (10:38 -0700)]
Merge tag 'fixes_for_v5.14-rc4' of git://git./linux/kernel/git/jack/linux-fs
Pull ext2 and reiserfs fixes from Jan Kara:
"A fix for the ext2 conversion to kmap_local() and two reiserfs
hardening fixes"
* tag 'fixes_for_v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
reiserfs: check directory items on read from disk
fs/ext2: Avoid page_address on pages returned by ext2_get_page
reiserfs: add check for root_inode in reiserfs_fill_super
Linus Torvalds [Wed, 28 Jul 2021 17:31:17 +0000 (10:31 -0700)]
Merge tag 'platform-drivers-x86-v5.14-2' of git://git./linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"A set of bug-fixes and new hardware ids.
Highlights:
- amd-pmc fixes
- think-lmi fixes
- various new hardware-ids"
* tag 'platform-drivers-x86-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: gigabyte-wmi: add support for B550 Aorus Elite V2
platform/x86: intel-hid: add Alder Lake ACPI device ID
platform/x86: think-lmi: Fix possible mem-leaks on tlmi_analyze() error-exit
platform/x86: think-lmi: Split kobject_init() and kobject_add() calls
platform/x86: think-lmi: Move pending_reboot_attr to the attributes sysfs dir
platform/x86: amd-pmc: Fix undefined reference to __udivdi3
platform/x86: amd-pmc: Fix missing unlock on error in amd_pmc_send_cmd()
platform/x86: wireless-hotkey: remove hardcoded "hp" from the error message
platform/x86: amd-pmc: Use return code on suspend
platform/x86: amd-pmc: Add new acpi id for future PMC controllers
platform/x86: amd-pmc: Add support for ACPI ID AMDI0006
platform/x86: amd-pmc: Add support for logging s0ix counters
platform/x86: amd-pmc: Add support for logging SMU metrics
platform/x86: amd-pmc: call dump registers only once
platform/x86: amd-pmc: Fix SMU firmware reporting mechanism
platform/x86: amd-pmc: Fix command completion code
platform/x86: think-lmi: Add pending_reboot support
Tony Luck [Wed, 21 Jul 2021 19:25:20 +0000 (12:25 -0700)]
dmaengine: idxd: Change license on idxd.h to LGPL
This file was given GPL-2.0 license. But LGPL-2.1 makes more sense
as it needs to be used by libraries outside of the kernel source tree.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miklos Szeredi [Wed, 28 Jul 2021 12:47:20 +0000 (14:47 +0200)]
af_unix: fix garbage collect vs MSG_PEEK
unix_gc() assumes that candidate sockets can never gain an external
reference (i.e. be installed into an fd) while the unix_gc_lock is
held. Except for MSG_PEEK this is guaranteed by modifying inflight
count under the unix_gc_lock.
MSG_PEEK does not touch any variable protected by unix_gc_lock (file
count is not), yet it needs to be serialized with garbage collection.
Do this by locking/unlocking unix_gc_lock:
1) increment file count
2) lock/unlock barrier to make sure incremented file count is visible
to garbage collection
3) install file into fd
This is a lock barrier (unlike smp_mb()) that ensures that garbage
collection is run completely before or completely after the barrier.
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Desmond Cheong Zhi Xi [Tue, 27 Jul 2021 07:13:03 +0000 (15:13 +0800)]
btrfs: fix rw device counting in __btrfs_free_extra_devids
When removing a writeable device in __btrfs_free_extra_devids, the rw
device count should be decremented.
This error was caught by Syzbot which reported a warning in
close_fs_devices:
WARNING: CPU: 1 PID: 9355 at fs/btrfs/volumes.c:1168 close_fs_devices+0x763/0x880 fs/btrfs/volumes.c:1168
Modules linked in:
CPU: 0 PID: 9355 Comm: syz-executor552 Not tainted 5.13.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:close_fs_devices+0x763/0x880 fs/btrfs/volumes.c:1168
RSP: 0018:
ffffc9000333f2f0 EFLAGS:
00010293
RAX:
ffffffff8365f5c3 RBX:
0000000000000001 RCX:
ffff888029afd4c0
RDX:
0000000000000000 RSI:
0000000000000001 RDI:
0000000000000000
RBP:
ffff88802846f508 R08:
ffffffff8365f525 R09:
ffffed100337d128
R10:
ffffed100337d128 R11:
0000000000000000 R12:
dffffc0000000000
R13:
ffff888019be8868 R14:
1ffff1100337d10d R15:
1ffff1100337d10a
FS:
00007f6f53828700(0000) GS:
ffff8880b9a00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
000000000047c410 CR3:
00000000302a6000 CR4:
00000000001506f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
btrfs_close_devices+0xc9/0x450 fs/btrfs/volumes.c:1180
open_ctree+0x8e1/0x3968 fs/btrfs/disk-io.c:3693
btrfs_fill_super fs/btrfs/super.c:1382 [inline]
btrfs_mount_root+0xac5/0xc60 fs/btrfs/super.c:1749
legacy_get_tree+0xea/0x180 fs/fs_context.c:592
vfs_get_tree+0x86/0x270 fs/super.c:1498
fc_mount fs/namespace.c:993 [inline]
vfs_kern_mount+0xc9/0x160 fs/namespace.c:1023
btrfs_mount+0x3d3/0xb50 fs/btrfs/super.c:1809
legacy_get_tree+0xea/0x180 fs/fs_context.c:592
vfs_get_tree+0x86/0x270 fs/super.c:1498
do_new_mount fs/namespace.c:2905 [inline]
path_mount+0x196f/0x2be0 fs/namespace.c:3235
do_mount fs/namespace.c:3248 [inline]
__do_sys_mount fs/namespace.c:3456 [inline]
__se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3433
do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47
entry_SYSCALL_64_after_hwframe+0x44/0xae
Because fs_devices->rw_devices was not 0 after
closing all devices. Here is the call trace that was observed:
btrfs_mount_root():
btrfs_scan_one_device():
device_list_add(); <---------------- device added
btrfs_open_devices():
open_fs_devices():
btrfs_open_one_device(); <-------- writable device opened,
rw device count ++
btrfs_fill_super():
open_ctree():
btrfs_free_extra_devids():
__btrfs_free_extra_devids(); <--- writable device removed,
rw device count not decremented
fail_tree_roots:
btrfs_close_devices():
close_fs_devices(); <------- rw device count off by 1
As a note, prior to commit
cf89af146b7e ("btrfs: dev-replace: fail
mount if we don't have replace item with target device"), rw_devices
was decremented on removing a writable device in
__btrfs_free_extra_devids only if the BTRFS_DEV_STATE_REPLACE_TGT bit
was not set for the device. However, this check does not need to be
reinstated as it is now redundant and incorrect.
In __btrfs_free_extra_devids, we skip removing the device if it is the
target for replacement. This is done by checking whether device->devid
== BTRFS_DEV_REPLACE_DEVID. Since BTRFS_DEV_STATE_REPLACE_TGT is set
only on the device with devid BTRFS_DEV_REPLACE_DEVID, no devices
should have the BTRFS_DEV_STATE_REPLACE_TGT bit set after the check,
and so it's redundant to test for that bit.
Additionally, following commit
82372bc816d7 ("Btrfs: make
the logic of source device removing more clear"), rw_devices is
incremented whenever a writeable device is added to the alloc
list (including the target device in btrfs_dev_replace_finishing), so
all removals of writable devices from the alloc list should also be
accompanied by a decrement to rw_devices.
Reported-by: syzbot+a70e2ad0879f160b9217@syzkaller.appspotmail.com
Fixes:
cf89af146b7e ("btrfs: dev-replace: fail mount if we don't have replace item with target device")
CC: stable@vger.kernel.org # 5.10+
Tested-by: syzbot+a70e2ad0879f160b9217@syzkaller.appspotmail.com
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Tue, 27 Jul 2021 10:24:43 +0000 (11:24 +0100)]
btrfs: fix lost inode on log replay after mix of fsync, rename and inode eviction
When checking if we need to log the new name of a renamed inode, we are
checking if the inode and its parent inode have been logged before, and if
not we don't log the new name. The check however is buggy, as it directly
compares the logged_trans field of the inodes versus the ID of the current
transaction. The problem is that logged_trans is a transient field, only
stored in memory and never persisted in the inode item, so if an inode
was logged before, evicted and reloaded, its logged_trans field is set to
a value of 0, meaning the check will return false and the new name of the
renamed inode is not logged. If the old parent directory was previously
fsynced and we deleted the logged directory entries corresponding to the
old name, we end up with a log that when replayed will delete the renamed
inode.
The following example triggers the problem:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ mkdir /mnt/A
$ mkdir /mnt/B
$ echo -n "hello world" > /mnt/A/foo
$ sync
# Add some new file to A and fsync directory A.
$ touch /mnt/A/bar
$ xfs_io -c "fsync" /mnt/A
# Now trigger inode eviction. We are only interested in triggering
# eviction for the inode of directory A.
$ echo 2 > /proc/sys/vm/drop_caches
# Move foo from directory A to directory B.
# This deletes the directory entries for foo in A from the log, and
# does not add the new name for foo in directory B to the log, because
# logged_trans of A is 0, which is less than the current transaction ID.
$ mv /mnt/A/foo /mnt/B/foo
# Now make an fsync to anything except A, B or any file inside them,
# like for example create a file at the root directory and fsync this
# new file. This syncs the log that contains all the changes done by
# previous rename operation.
$ touch /mnt/baz
$ xfs_io -c "fsync" /mnt/baz
<power fail>
# Mount the filesystem and replay the log.
$ mount /dev/sdc /mnt
# Check the filesystem content.
$ ls -1R /mnt
/mnt/:
A
B
baz
/mnt/A:
bar
/mnt/B:
$
# File foo is gone, it's neither in A/ nor in B/.
Fix this by using the inode_logged() helper at btrfs_log_new_name(), which
safely checks if an inode was logged before in the current transaction.
A test case for fstests will follow soon.
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Goldwyn Rodrigues [Fri, 9 Jul 2021 16:29:22 +0000 (11:29 -0500)]
btrfs: mark compressed range uptodate only if all bio succeed
In compression write endio sequence, the range which the compressed_bio
writes is marked as uptodate if the last bio of the compressed (sub)bios
is completed successfully. There could be previous bio which may
have failed which is recorded in cb->errors.
Set the writeback range as uptodate only if cb->errors is zero, as opposed
to checking only the last bio's status.
Backporting notes: in all versions up to 4.4 the last argument is always
replaced by "!cb->errors".
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Srinivas Pandruvada [Tue, 27 Jul 2021 16:18:24 +0000 (09:18 -0700)]
ACPI: DPTF: Fix reading of attributes
The current assumption that methods to read PCH FIVR attributes will
return integer, is not correct. There is no good way to return integer
as negative numbers are also valid.
These read methods return a package of integers. The first integer returns
status, which is 0 on success and any other value for failure. When the
returned status is zero, then the second integer returns the actual value.
This change fixes this issue by replacing acpi_evaluate_integer() with
acpi_evaluate_object() and use acpi_extract_package() to extract results.
Fixes:
2ce6324eadb01 ("ACPI: DPTF: Add PCH FIVR participant driver")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hui Wang [Wed, 28 Jul 2021 15:19:58 +0000 (23:19 +0800)]
Revert "ACPI: resources: Add checks for ACPI IRQ override"
The commit
0ec4e55e9f57 ("ACPI: resources: Add checks for ACPI IRQ
override") introduces regression on some platforms, at least it makes
the UART can't get correct irq setting on two different platforms,
and it makes the kernel can't bootup on these two platforms.
This reverts commit
0ec4e55e9f571f08970ed115ec0addc691eda613.
Regression-discuss: https://bugzilla.kernel.org/show_bug.cgi?id=213031
Reported-by: PGNd <pgnet.dev@gmail.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hao Xu [Wed, 28 Jul 2021 03:03:22 +0000 (11:03 +0800)]
io_uring: fix poll requests leaking second poll entries
For pure poll requests, it doesn't remove the second poll wait entry
when it's done, neither after vfs_poll() or in the poll completion
handler. We should remove the second poll wait entry.
And we use io_poll_remove_double() rather than io_poll_remove_waitqs()
since the latter has some redundant logic.
Fixes:
88e41cf928a6 ("io_uring: add multishot mode for IORING_OP_POLL_ADD")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Hao Xu <haoxu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210728030322.12307-1-haoxu@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Tue, 27 Jul 2021 16:50:31 +0000 (10:50 -0600)]
io_uring: don't block level reissue off completion path
Some setups, like SCSI, can throw spurious -EAGAIN off the softirq
completion path. Normally we expect this to happen inline as part
of submission, but apparently SCSI has a weird corner case where it
can happen as part of normal completions.
This should be solved by having the -EAGAIN bubble back up the stack
as part of submission, but previous attempts at this failed and we're
not just quite there yet. Instead we currently use REQ_F_REISSUE to
handle this case.
For now, catch it in io_rw_should_reissue() and prevent a reissue
from a bogus path.
Cc: stable@vger.kernel.org
Reported-by: Fabian Ebner <f.ebner@proxmox.com>
Tested-by: Fabian Ebner <f.ebner@proxmox.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Wang Hai [Wed, 28 Jul 2021 12:11:07 +0000 (20:11 +0800)]
sis900: Fix missing pci_disable_device() in probe and remove
Replace pci_enable_device() with pcim_enable_device(),
pci_disable_device() and pci_release_regions() will be
called in release automatically.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
zhang kai [Wed, 28 Jul 2021 10:54:18 +0000 (18:54 +0800)]
net: let flow have same hash in two directions
using same source and destination ip/port for flow hash calculation
within the two directions.
Signed-off-by: zhang kai <zhangkaiheb@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Weißschuh [Mon, 26 Jul 2021 15:36:30 +0000 (17:36 +0200)]
platform/x86: gigabyte-wmi: add support for B550 Aorus Elite V2
Reported as working here:
https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/1#issuecomment-
879398883
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20210726153630.65213-1-linux@weissschuh.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Ping Bao [Wed, 21 Jul 2021 22:56:15 +0000 (15:56 -0700)]
platform/x86: intel-hid: add Alder Lake ACPI device ID
Alder Lake has a new ACPI ID for Intel HID event filter device.
Signed-off-by: Ping Bao <ping.a.bao@intel.com>
Link: https://lore.kernel.org/r/20210721225615.20575-1-ping.a.bao@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Jason Gerecke [Mon, 19 Jul 2021 20:55:31 +0000 (13:55 -0700)]
HID: wacom: Skip processing of touches with negative slot values
The `input_mt_get_slot_by_key` function may return a negative value
if an error occurs (e.g. running out of slots). If this occurs we
should really avoid reporting any data for the slot.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jason Gerecke [Mon, 19 Jul 2021 20:55:28 +0000 (13:55 -0700)]
HID: wacom: Re-enable touch by default for Cintiq 24HDT / 27QHDT
Commit
670e90924bfe ("HID: wacom: support named keys on older devices")
added support for sending named events from the soft buttons on the
24HDT and 27QHDT. In the process, however, it inadvertantly disabled the
touchscreen of the 24HDT and 27QHDT by default. The
`wacom_set_shared_values` function would normally enable touch by default
but because it checks the state of the non-shared `has_mute_touch_switch`
flag and `wacom_setup_touch_input_capabilities` sets the state of the
/shared/ version, touch ends up being disabled by default.
This patch sets the non-shared flag, letting `wacom_set_shared_values`
take care of copying the value over to the shared version and setting
the default touch state to "on".
Fixes:
670e90924bfe ("HID: wacom: support named keys on older devices")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>