Conor Dooley [Fri, 12 May 2023 07:58:18 +0000 (08:58 +0100)]
RISC-V: take text_mutex during alternative patching
commit
9493e6f3ce02f44c21aa19f3cbf3b9aa05479d06 upstream.
Guenter reported a splat during boot, that Samuel pointed out was the
lockdep assertion failing in patch_insn_write():
WARNING: CPU: 0 PID: 0 at arch/riscv/kernel/patch.c:63 patch_insn_write+0x222/0x2f6
epc : patch_insn_write+0x222/0x2f6
ra : patch_insn_write+0x21e/0x2f6
epc :
ffffffff800068c6 ra :
ffffffff800068c2 sp :
ffffffff81803df0
gp :
ffffffff81a1ab78 tp :
ffffffff81814f80 t0 :
ffffffffffffe000
t1 :
0000000000000001 t2 :
4c45203a76637369 s0 :
ffffffff81803e40
s1 :
0000000000000004 a0 :
0000000000000000 a1 :
ffffffffffffffff
a2 :
0000000000000004 a3 :
0000000000000000 a4 :
0000000000000001
a5 :
0000000000000000 a6 :
0000000000000000 a7 :
0000000052464e43
s2 :
ffffffff80b4889c s3 :
000000000000082c s4 :
ffffffff80b48828
s5 :
0000000000000828 s6 :
ffffffff8131a0a0 s7 :
0000000000000fff
s8 :
0000000008000200 s9 :
ffffffff8131a520 s10:
0000000000000018
s11:
000000000000000b t3 :
0000000000000001 t4 :
000000000000000d
t5 :
ffffffffd8180000 t6 :
ffffffff81803bc8
status:
0000000200000100 badaddr:
0000000000000000 cause:
0000000000000003
[<
ffffffff800068c6>] patch_insn_write+0x222/0x2f6
[<
ffffffff80006a36>] patch_text_nosync+0xc/0x2a
[<
ffffffff80003b86>] riscv_cpufeature_patch_func+0x52/0x98
[<
ffffffff80003348>] _apply_alternatives+0x46/0x86
[<
ffffffff80c02d36>] apply_boot_alternatives+0x3c/0xfa
[<
ffffffff80c03ad8>] setup_arch+0x584/0x5b8
[<
ffffffff80c0075a>] start_kernel+0xa2/0x8f8
This issue was exposed by
702e64550b12 ("riscv: fpu: switch has_fpu() to
riscv_has_extension_likely()"), as it is the patching in has_fpu() that
triggers the splats in Guenter's report.
Take the text_mutex before doing any code patching to satisfy lockdep.
Fixes: ff689fd21cb1 ("riscv: add RISC-V Svpbmt extension support")
Fixes: a35707c3d850 ("riscv: add memory-type errata for T-Head")
Fixes: 1a0e5dbd3723 ("riscv: sifive: Add SiFive alternative ports")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/20230212154333.GA3760469@roeck-us.net/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230212194735.491785-1-conor@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitrii Dolgov [Wed, 12 Apr 2023 18:23:16 +0000 (20:23 +0200)]
perf stat: Separate bperf from bpf_profiler
[ Upstream commit
ecc68ee216c6c5b2f84915e1441adf436f1b019b ]
It seems that perf stat -b <prog id> doesn't produce any results:
$ perf stat -e cycles -b 4 -I 10000 -vvv
Control descriptor is not initialized
cycles: 0 0 0
time counts unit events
10.
007641640 <not supported> cycles
Looks like this happens because fentry/fexit progs are getting loaded, but the
corresponding perf event is not enabled and not added into the events bpf map.
I think there is some mixing up between two type of bpf support, one for bperf
and one for bpf_profiler. Both are identified via evsel__is_bpf, based on which
perf events are enabled, but for the latter (bpf_profiler) a perf event is
required. Using evsel__is_bperf to check only bperf produces expected results:
$ perf stat -e cycles -b 4 -I 10000 -vvv
Control descriptor is not initialized
------------------------------------------------------------
perf_event_attr:
size 136
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 3
------------------------------------------------------------
[...perf_event_attr for other CPUs...]
------------------------------------------------------------
cycles: 309426 169009 169009
time counts unit events
10.
010091271 309426 cycles
The final numbers correspond (at least in the level of magnitude) to the
same metric obtained via bpftool.
Fixes: 112cb56164bc2108 ("perf stat: Introduce config stat.bpf-counter-events")
Reviewed-by: Song Liu <song@kernel.org>
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Tested-by: Song Liu <song@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230412182316.11628-1-9erthalion6@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Jihong [Fri, 21 Apr 2023 02:59:53 +0000 (02:59 +0000)]
perf tracepoint: Fix memory leak in is_valid_tracepoint()
[ Upstream commit
9b86c49710eec7b4fbb78a0232b2dd0972a2b576 ]
When is_valid_tracepoint() returns 1, need to call put_events_file() to
free `dir_path`.
Fixes: 25a7d914274de386 ("perf parse-events: Use get/put_events_file()")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230421025953.173826-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Jihong [Thu, 27 Apr 2023 01:28:41 +0000 (01:28 +0000)]
perf symbols: Fix return incorrect build_id size in elf_read_build_id()
[ Upstream commit
1511e4696acb715a4fe48be89e1e691daec91c0e ]
In elf_read_build_id(), if gnu build_id is found, should return the size of
the actually copied data. If descsz is greater thanBuild_ID_SIZE,
write_buildid data access may occur.
Fixes: be96ea8ffa788dcc ("perf symbols: Fix issue with binaries using 16-bytes buildids (v2)")
Reported-by: Will Ochowicz <Will.Ochowicz@genusplc.com>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Will Ochowicz <Will.Ochowicz@genusplc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/lkml/CWLP265MB49702F7BA3D6D8F13E4B1A719C649@CWLP265MB4970.GBRP265.PROD.OUTLOOK.COM/T/
Link: https://lore.kernel.org/r/20230427012841.231729-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Olivier Bacon [Thu, 20 Apr 2023 15:00:35 +0000 (11:00 -0400)]
crypto: engine - fix crypto_queue backlog handling
[ Upstream commit
4140aafcff167b5b9e8dae6a1709a6de7cac6f74 ]
CRYPTO_TFM_REQ_MAY_BACKLOG tells the crypto driver that it should
internally backlog requests until the crypto hw's queue becomes
full. At that point, crypto_engine backlogs the request and returns
-EBUSY. Calling driver such as dm-crypt then waits until the
complete() function is called with a status of -EINPROGRESS before
sending a new request.
The problem lies in the call to complete() with a value of -EINPROGRESS
that is made when a backlog item is present on the queue. The call is
done before the successful execution of the crypto request. In the case
that do_one_request() returns < 0 and the retry support is available,
the request is put back in the queue. This leads upper drivers to send
a new request even if the queue is still full.
The problem can be reproduced by doing a large dd into a crypto
dm-crypt device. This is pretty easy to see when using
Freescale CAAM crypto driver and SWIOTLB dma. Since the actual amount
of requests that can be hold in the queue is unlimited we get IOs error
and dma allocation.
The fix is to call complete with a value of -EINPROGRESS only if
the request is not enqueued back in crypto_queue. This is done
by calling complete() later in the code. In order to delay the decision,
crypto_queue is modified to correctly set the backlog pointer
when a request is enqueued back.
Fixes: 6a89f492f8e5 ("crypto: engine - support for parallel requests based on retry mechanism")
Co-developed-by: Sylvain Ouellet <souellet@genetec.com>
Signed-off-by: Sylvain Ouellet <souellet@genetec.com>
Signed-off-by: Olivier Bacon <obacon@genetec.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Herbert Xu [Tue, 31 Jan 2023 08:02:02 +0000 (16:02 +0800)]
crypto: engine - Use crypto_request_complete
[ Upstream commit
6909823d47c17cba84e9244d04050b5db8d53789 ]
Use the crypto_request_complete helper instead of calling the
completion function directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of:
4140aafcff16 ("crypto: engine - fix crypto_queue backlog handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Herbert Xu [Tue, 31 Jan 2023 08:01:45 +0000 (16:01 +0800)]
crypto: api - Add scaffolding to change completion function signature
[ Upstream commit
c35e03eaece71101ff6cbf776b86403860ac8cc3 ]
The crypto completion function currently takes a pointer to a
struct crypto_async_request object. However, in reality the API
does not allow the use of any part of the object apart from the
data field. For example, ahash/shash will create a fake object
on the stack to pass along a different data field.
This leads to potential bugs where the user may try to dereference
or otherwise use the crypto_async_request object.
This patch adds some temporary scaffolding so that the completion
function can take a void * instead. Once affected users have been
converted this can be removed.
The helper crypto_request_complete will remain even after the
conversion is complete. It should be used instead of calling
the completion function directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of:
4140aafcff16 ("crypto: engine - fix crypto_queue backlog handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Mon, 17 Apr 2023 20:25:09 +0000 (22:25 +0200)]
crypto: sun8i-ss - Fix a test in sun8i_ss_setup_ivs()
[ Upstream commit
8fd91151ebcb21b3f2f2bf158ac6092192550b2b ]
SS_ENCRYPTION is (0 << 7 = 0), so the test can never be true.
Use a direct comparison to SS_ENCRYPTION instead.
The same king of test is already done the same way in sun8i_ss_run_task().
Fixes: 359e893e8af4 ("crypto: sun8i-ss - rework handling of IV")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Clark [Mon, 24 Apr 2023 13:47:41 +0000 (14:47 +0100)]
perf cs-etm: Fix timeless decode mode detection
[ Upstream commit
449067f3fc9f340da54e383738286881e6634d0b ]
In this context, timeless refers to the trace data rather than the perf
event data. But when detecting whether there are timestamps in the trace
data or not, the presence of a timestamp flag on any perf event is used.
Since commit
f42c0ce573df ("perf record: Always get text_poke events
with --kcore option") timestamps were added to a tracking event when
--kcore is used which breaks this detection mechanism. Fix it by
detecting if trace timestamps exist by looking at the ETM config flags.
This would have always been a more accurate way of doing it anyway.
This fixes the following error message when using --kcore with
Coresight:
$ perf record --kcore -e cs_etm// --per-thread
$ perf report
The perf.data/data data has no samples!
Fixes: f42c0ce573df79d1 ("perf record: Always get text_poke events with --kcore option")
Reported-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: denik@google.com
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/lkml/CAHbLzkrJQTrYBtPkf=jf3OpQ-yBcJe7XkvQstX9j2frz4WF-SQ@mail.gmail.com/
Link: https://lore.kernel.org/r/20230424134748.228137-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Markus Elfring [Thu, 13 Apr 2023 12:46:39 +0000 (14:46 +0200)]
perf map: Delete two variable initialisations before null pointer checks in sort__sym_from_cmp()
[ Upstream commit
c160118a90d4acf335993d8d59b02ae2147a524e ]
Addresses of two data structure members were determined before
corresponding null pointer checks in the implementation of the function
“sort__sym_from_cmp”.
Thus avoid the risk for undefined behaviour by removing extra
initialisations for the local variables “from_l” and “from_r” (also
because they were already reassigned with the same value behind this
pointer check).
This issue was detected by using the Coccinelle software.
Fixes: 1b9e97a2a95e4941 ("perf tools: Fix report -F symbol_from for data without branch info")
Signed-off-by: <elfring@users.sourceforge.net>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/cocci/54a21fea-64e3-de67-82ef-d61b90ffad05@web.de/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnaldo Carvalho de Melo [Wed, 12 Apr 2023 13:23:35 +0000 (10:23 -0300)]
perf pmu: zfree() expects a pointer to a pointer to zero it after freeing its contents
[ Upstream commit
57f14b5ae1a97537f2abd2828ee7212cada7036e ]
An audit showed just this one problem with zfree(), fix it.
Fixes: 9fbc61f832ebf432 ("perf pmu: Add support for PMU capabilities")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kajol Jain [Tue, 28 Mar 2023 11:29:08 +0000 (16:59 +0530)]
perf vendor events power9: Remove UTF-8 characters from JSON files
[ Upstream commit
5d9df8731c0941f3add30f96745a62586a0c9d52 ]
Commit
3c22ba5243040c13 ("perf vendor events powerpc: Update POWER9
events") added and updated power9 PMU JSON events. However some of the
JSON events which are part of other.json and pipeline.json files,
contains UTF-8 characters in their brief description. Having UTF-8
character could breaks the perf build on some distros.
Fix this issue by removing the UTF-8 characters from other.json and
pipeline.json files.
Result without the fix:
[command]# file -i pmu-events/arch/powerpc/power9/*
pmu-events/arch/powerpc/power9/cache.json: application/json; charset=us-ascii
pmu-events/arch/powerpc/power9/floating-point.json: application/json; charset=us-ascii
pmu-events/arch/powerpc/power9/frontend.json: application/json; charset=us-ascii
pmu-events/arch/powerpc/power9/marked.json: application/json; charset=us-ascii
pmu-events/arch/powerpc/power9/memory.json: application/json; charset=us-ascii
pmu-events/arch/powerpc/power9/metrics.json: application/json; charset=us-ascii
pmu-events/arch/powerpc/power9/nest_metrics.json: application/json; charset=us-ascii
pmu-events/arch/powerpc/power9/other.json: application/json; charset=utf-8
pmu-events/arch/powerpc/power9/pipeline.json: application/json; charset=utf-8
pmu-events/arch/powerpc/power9/pmc.json: application/json; charset=us-ascii
pmu-events/arch/powerpc/power9/translation.json: application/json; charset=us-ascii
[command]#
Result with the fix:
[command]# file -i pmu-events/arch/powerpc/power9/*
pmu-events/arch/powerpc/power9/cache.json: application/json; charset=us-ascii
pmu-events/arch/powerpc/power9/floating-point.json: application/json; charset=us-ascii
pmu-events/arch/powerpc/power9/frontend.json: application/json; charset=us-ascii
pmu-events/arch/powerpc/power9/marked.json: application/json; charset=us-ascii
pmu-events/arch/powerpc/power9/memory.json: application/json; charset=us-ascii
pmu-events/arch/powerpc/power9/metrics.json: application/json; charset=us-ascii
pmu-events/arch/powerpc/power9/nest_metrics.json: application/json; charset=us-ascii
pmu-events/arch/powerpc/power9/other.json: application/json; charset=us-ascii
pmu-events/arch/powerpc/power9/pipeline.json: application/json; charset=us-ascii
pmu-events/arch/powerpc/power9/pmc.json: application/json; charset=us-ascii
pmu-events/arch/powerpc/power9/translation.json: application/json; charset=us-ascii
[command]#
Fixes: 3c22ba5243040c13 ("perf vendor events powerpc: Update POWER9 events")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/lkml/ZBxP77deq7ikTxwG@kernel.org/
Link: https://lore.kernel.org/r/20230328112908.113158-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Jihong [Fri, 24 Mar 2023 03:27:02 +0000 (03:27 +0000)]
perf ftrace: Make system wide the default target for latency subcommand
[ Upstream commit
ecd4960d908e27e40b63a7046df2f942c148c6f6 ]
If no target is specified for 'latency' subcommand, the execution fails
because - 1 (invalid value) is written to set_ftrace_pid tracefs file.
Make system wide the default target, which is the same as the default
behavior of 'trace' subcommand.
Before the fix:
# perf ftrace latency -T schedule
failed to set ftrace pid
After the fix:
# perf ftrace latency -T schedule
^C# DURATION | COUNT | GRAPH |
0 - 1 us | 0 | |
1 - 2 us | 0 | |
2 - 4 us | 0 | |
4 - 8 us | 2828 | #### |
8 - 16 us | 23953 | ######################################## |
16 - 32 us | 408 | |
32 - 64 us | 318 | |
64 - 128 us | 4 | |
128 - 256 us | 3 | |
256 - 512 us | 0 | |
512 - 1024 us | 1 | |
1 - 2 ms | 4 | |
2 - 4 ms | 0 | |
4 - 8 ms | 0 | |
8 - 16 ms | 0 | |
16 - 32 ms | 0 | |
32 - 64 ms | 0 | |
64 - 128 ms | 0 | |
128 - 256 ms | 4 | |
256 - 512 ms | 2 | |
512 - 1024 ms | 0 | |
1 - ... s | 0 | |
Fixes: 53be50282269b46c ("perf ftrace: Add 'latency' subcommand")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230324032702.109964-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Patrice Duroux [Fri, 3 Mar 2023 19:30:58 +0000 (20:30 +0100)]
perf tests record_offcpu.sh: Fix redirection of stderr to stdin
[ Upstream commit
9835b742ac3ee16dee361e7ccda8022f99d1cd94 ]
It's not 2&>1, the correct is 2>&1
Fixes: ade1d0307b2fb3d9 ("perf offcpu: Update offcpu test for child process")
Signed-off-by: Patrice Duroux <patrice.duroux@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20230303193058.21274-1-patrice.duroux@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Richter [Thu, 23 Mar 2023 12:25:32 +0000 (13:25 +0100)]
perf vendor events s390: Remove UTF-8 characters from JSON file
[ Upstream commit
eb2feb68cb7d404288493c41480843bc9f404789 ]
Commit
7f76b31130680fb3 ("perf list: Add IBM z16 event description for
s390") contains the verbal description for z16 extended counter set.
However some entries of the public description contain UTF-8 characters
which breaks the build on some distros.
Fix this and remove the UTF-8 characters.
Fixes: 7f76b31130680fb3 ("perf list: Add IBM z16 event description for s390")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/ZBwkl77/I31AQk12@osiris
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Roman Lozko [Fri, 10 Mar 2023 15:04:45 +0000 (15:04 +0000)]
perf scripts intel-pt-events.py: Fix IPC output for Python 2
[ Upstream commit
1f64cfdebfe0494264271e8d7a3a47faf5f58ec7 ]
Integers are not converted to floats during division in Python 2 which
results in incorrect IPC values. Fix by switching to new division
behavior.
Fixes: a483e64c0b62e93a ("perf scripting python: intel-pt-events.py: Add --insn-trace and --src-trace")
Signed-off-by: Roman Lozko <lozko.roma@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230310150445.2925841-1-lozko.roma@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kan Liang [Wed, 1 Mar 2023 15:04:13 +0000 (07:04 -0800)]
perf record: Fix "read LOST count failed" msg with sample read
[ Upstream commit
07d85ba9d04e1ebd282f656a29ddf08c5b7b32a2 ]
Hundreds of "read LOST count failed" error messages may be displayed,
when the below command is launched.
perf record -e '{cpu/mem-loads-aux/,cpu/event=0xcd,umask=0x1/}:S' -a
According to the commit
89e3106fa25fb1b6 ("libperf: Handle read format
in perf_evsel__read()"), the PERF_FORMAT_GROUP is only available for
the leader. However, the record__read_lost_samples() goes through every
entry of an evlist, which includes both leader and member. The member
event errors out and triggers the error message. Since there may be
hundreds of CPUs on a server, the message will be printed hundreds of
times, which is very annoying.
The message itself is correct, but the pr_err is a overkill. Other error
messages in the record__read_lost_samples() are all pr_debug. To make
the output format consistent, change the pr_err("read LOST count
failed\n"); to pr_debug("read LOST count failed\n");.
User can still get the message via -v option.
Fixes: e3a23261ad06d598 ("perf record: Read and inject LOST_SAMPLES events")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230301150413.27011-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wei Fang [Thu, 4 May 2023 08:03:59 +0000 (16:03 +0800)]
net: enetc: check the index of the SFI rather than the handle
[ Upstream commit
299efdc2380aac588557f4d0b2ce7bee05bd0cf2 ]
We should check whether the current SFI (Stream Filter Instance) table
is full before creating a new SFI entry. However, the previous logic
checks the handle by mistake and might lead to unpredictable behavior.
Fixes: 888ae5a3952b ("net: enetc: add tc flower psfp offload driver")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wenliang Wang [Thu, 4 May 2023 02:27:06 +0000 (10:27 +0800)]
virtio_net: suppress cpu stall when free_unused_bufs
[ Upstream commit
f8bb5104394560e29017c25bcade4c6b7aabd108 ]
For multi-queue and large ring-size use case, the following error
occurred when free_unused_bufs:
rcu: INFO: rcu_sched self-detected stall on CPU.
Fixes: 986a4f4d452d ("virtio_net: multiqueue support")
Signed-off-by: Wenliang Wang <wangwenliang.1995@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michal Swiatkowski [Wed, 3 May 2023 15:39:35 +0000 (08:39 -0700)]
ice: block LAN in case of VF to VF offload
[ Upstream commit
9f699b71c2f31c51bd1483a20e1c8ddc5986a8c9 ]
VF to VF traffic shouldn't go outside. To enforce it, set only the loopback
enable bit in case of all ingress type rules added via the tc tool.
Fixes: 0d08a441fb1a ("ice: ndo_setup_tc implementation for PF")
Reported-by: Sujai Buvaneswaran <Sujai.Buvaneswaran@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arınç ÜNAL [Tue, 2 May 2023 21:09:47 +0000 (00:09 +0300)]
net: dsa: mt7530: fix network connectivity with multiple CPU ports
[ Upstream commit
120a56b01beed51ab5956a734adcfd2760307107 ]
On mt753x_cpu_port_enable() there's code that enables flooding for the CPU
port only. Since mt753x_cpu_port_enable() runs twice when both CPU ports
are enabled, port 6 becomes the only port to forward the frames to. But
port 5 is the active port, so no frames received from the user ports will
be forwarded to port 5 which breaks network connectivity.
Every bit of the BC_FFP, UNM_FFP, and UNU_FFP bits represents a port. Fix
this issue by setting the bit that corresponds to the CPU port without
overwriting the other bits.
Clear the bits beforehand only for the MT7531 switch. According to the
documents MT7621 Giga Switch Programming Guide v0.3 and MT7531 Reference
Manual for Development Board v1.0, after reset, the BC_FFP, UNM_FFP, and
UNU_FFP bits are set to 1 for MT7531, 0 for MT7530.
The commit
5e5502e012b8 ("net: dsa: mt7530: fix roaming from DSA user
ports") silently changed the method to set the bits on the MT7530_MFC.
Instead of clearing the relevant bits before mt7530_cpu_port_enable()
which runs under a for loop, the commit started doing it on
mt7530_cpu_port_enable().
Back then, this didn't really matter as only a single CPU port could be
used since the CPU port number was hardcoded. The driver was later changed
with commit
1f9a6abecf53 ("net: dsa: mt7530: get cpu-port via dp->cpu_dp
instead of constant") to retrieve the CPU port via dp->cpu_dp. With that,
this silent change became an issue for when using multiple CPU ports.
Fixes: 5e5502e012b8 ("net: dsa: mt7530: fix roaming from DSA user ports")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Golle [Mon, 3 Apr 2023 01:19:02 +0000 (02:19 +0100)]
net: dsa: mt7530: split-off common parts from mt7531_setup
[ Upstream commit
7f54cc9772ced2d76ac11832f0ada43798443ac9 ]
MT7988 shares a significant part of the setup function with MT7531.
Split-off those parts into a shared function which is going to be used
also by mt7988_setup.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of:
120a56b01bee ("net: dsa: mt7530: fix network connectivity with multiple CPU ports")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arınç ÜNAL [Tue, 2 May 2023 21:09:46 +0000 (00:09 +0300)]
net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621
[ Upstream commit
37c218d8021e36e226add4bab93d071d30fe0704 ]
The multi-chip module MT7530 switch with a 40 MHz oscillator on the
MT7621AT, MT7621DAT, and MT7621ST SoCs forwards corrupt frames using
trgmii.
This is caused by the assumption that MT7621 SoCs have got 150 MHz PLL,
hence using the ncpo1 value, 0x0780.
My testing shows this value works on Unielec U7621-06, Bartel's testing
shows it won't work on Hi-Link HLK-MT7621A and Netgear WAC104. All devices
tested have got 40 MHz oscillators.
Using the value for 125 MHz PLL, 0x0640, works on all boards at hand. The
definitions for 125 MHz PLL exist on the Banana Pi BPI-R2 BSP source code
whilst 150 MHz PLL don't.
Forwarding frames using trgmii on the MCM MT7530 switch with a 25 MHz
oscillator on the said MT7621 SoCs works fine because the ncpo1 value
defined for it is for 125 MHz PLL.
Change the 150 MHz PLL comment to 125 MHz PLL, and use the 125 MHz PLL
ncpo1 values for both oscillator frequencies.
Link: https://github.com/BPI-SINOVOIP/BPI-R2-bsp/blob/81d24bbce7d99524d0771a8bdb2d6663e4eb4faa/u-boot-mt/drivers/net/rt2880_eth.c#L2195
Fixes: 7ef6f6f8d237 ("net: dsa: mt7530: Add MT7621 TRGMII mode support")
Tested-by: Bartel Eerdekens <bartel.eerdekens@constell8.be>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudio Imbrenda [Fri, 28 Apr 2023 09:27:53 +0000 (11:27 +0200)]
KVM: s390: fix race in gmap_make_secure()
[ Upstream commit
c148dc8e2fa403be501612ee409db866eeed35c0 ]
Fix a potential race in gmap_make_secure() and remove the last user of
follow_page() without FOLL_GET.
The old code is locking something it doesn't have a reference to, and
as explained by Jason and David in this discussion:
https://lore.kernel.org/linux-mm/Y9J4P%2FRNvY1Ztn0Q@nvidia.com/
it can lead to all kind of bad things, including the page getting
unmapped (MADV_DONTNEED), freed, reallocated as a larger folio and the
unlock_page() would target the wrong bit.
There is also another race with the FOLL_WRITE, which could race
between the follow_page() and the get_locked_pte().
The main point is to remove the last use of follow_page() without
FOLL_GET or FOLL_PIN, removing the races can be considered a nice
bonus.
Link: https://lore.kernel.org/linux-mm/Y9J4P%2FRNvY1Ztn0Q@nvidia.com/
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes: 214d9bbcd3a6 ("s390/mm: provide memory management functions for protected KVM guests")
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <
20230428092753.27913-2-imbrenda@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ruliang Lin [Thu, 4 May 2023 06:50:53 +0000 (14:50 +0800)]
ALSA: caiaq: input: Add error handling for unsupported input methods in `snd_usb_caiaq_input_init`
[ Upstream commit
0d727e1856ef22dd9337199430258cb64cbbc658 ]
Smatch complains that:
snd_usb_caiaq_input_init() warn: missing error code 'ret'
This patch adds a new case to handle the situation where the
device does not support any input methods in the
`snd_usb_caiaq_input_init` function. It returns an `-EINVAL` error code
to indicate that no input methods are supported on the device.
Fixes: 523f1dce3743 ("[ALSA] Add Native Instrument usb audio device support")
Signed-off-by: Ruliang Lin <u202112092@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Acked-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20230504065054.3309-1-u202112092@hust.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chia-I Wu [Wed, 26 Apr 2023 22:54:55 +0000 (15:54 -0700)]
drm/amdgpu: add a missing lock for AMDGPU_SCHED
[ Upstream commit
2397e3d8d2e120355201a8310b61929f5a8bd2c0 ]
mgr->ctx_handles should be protected by mgr->lock.
v2: improve commit message
v3: add a Fixes tag
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: 52c6a62c64fa ("drm/amdgpu: add interface for editing a foreign process's priority v3")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuniyuki Iwashima [Mon, 1 May 2023 20:28:57 +0000 (13:28 -0700)]
af_packet: Don't send zero-byte data in packet_sendmsg_spkt().
[ Upstream commit
6a341729fb31b4c5df9f74f24b4b1c98410c9b87 ]
syzkaller reported a warning below [0].
We can reproduce it by sending 0-byte data from the (AF_PACKET,
SOCK_PACKET) socket via some devices whose dev->hard_header_len
is 0.
struct sockaddr_pkt addr = {
.spkt_family = AF_PACKET,
.spkt_device = "tun0",
};
int fd;
fd = socket(AF_PACKET, SOCK_PACKET, 0);
sendto(fd, NULL, 0, 0, (struct sockaddr *)&addr, sizeof(addr));
We have a similar fix for the (AF_PACKET, SOCK_RAW) socket as
commit
dc633700f00f ("net/af_packet: check len when min_header_len
equals to 0").
Let's add the same test for the SOCK_PACKET socket.
[0]:
skb_assert_len
WARNING: CPU: 1 PID: 19945 at include/linux/skbuff.h:2552 skb_assert_len include/linux/skbuff.h:2552 [inline]
WARNING: CPU: 1 PID: 19945 at include/linux/skbuff.h:2552 __dev_queue_xmit+0x1f26/0x31d0 net/core/dev.c:4159
Modules linked in:
CPU: 1 PID: 19945 Comm: syz-executor.0 Not tainted
6.3.0-rc7-02330-gca6270c12e20 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:skb_assert_len include/linux/skbuff.h:2552 [inline]
RIP: 0010:__dev_queue_xmit+0x1f26/0x31d0 net/core/dev.c:4159
Code: 89 de e8 1d a2 85 fd 84 db 75 21 e8 64 a9 85 fd 48 c7 c6 80 2a 1f 86 48 c7 c7 c0 06 1f 86 c6 05 23 cf 27 04 01 e8 fa ee 56 fd <0f> 0b e8 43 a9 85 fd 0f b6 1d 0f cf 27 04 31 ff 89 de e8 e3 a1 85
RSP: 0018:
ffff8880217af6e0 EFLAGS:
00010282
RAX:
0000000000000000 RBX:
0000000000000000 RCX:
ffffc90001133000
RDX:
0000000000040000 RSI:
ffffffff81186922 RDI:
0000000000000001
RBP:
ffff8880217af8b0 R08:
0000000000000001 R09:
0000000000000000
R10:
0000000000000001 R11:
0000000000000001 R12:
ffff888030045640
R13:
ffff8880300456b0 R14:
ffff888030045650 R15:
ffff888030045718
FS:
00007fc5864da640(0000) GS:
ffff88806cd00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000020005740 CR3:
000000003f856003 CR4:
0000000000770ee0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
PKRU:
55555554
Call Trace:
<TASK>
dev_queue_xmit include/linux/netdevice.h:3085 [inline]
packet_sendmsg_spkt+0xc4b/0x1230 net/packet/af_packet.c:2066
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg+0x1b4/0x200 net/socket.c:747
____sys_sendmsg+0x331/0x970 net/socket.c:2503
___sys_sendmsg+0x11d/0x1c0 net/socket.c:2557
__sys_sendmmsg+0x18c/0x430 net/socket.c:2643
__do_sys_sendmmsg net/socket.c:2672 [inline]
__se_sys_sendmmsg net/socket.c:2669 [inline]
__x64_sys_sendmmsg+0x9c/0x100 net/socket.c:2669
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7fc58791de5d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48
RSP: 002b:
00007fc5864d9cc8 EFLAGS:
00000246 ORIG_RAX:
0000000000000133
RAX:
ffffffffffffffda RBX:
00000000004bbf80 RCX:
00007fc58791de5d
RDX:
0000000000000001 RSI:
0000000020005740 RDI:
0000000000000004
RBP:
00000000004bbf80 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
0000000000000000
R13:
000000000000000b R14:
00007fc58797e530 R15:
0000000000000000
</TASK>
---[ end trace
0000000000000000 ]---
skb len=0 headroom=16 headlen=0 tailroom=304
mac=(16,0) net=(16,-1) trans=-1
shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0))
csum(0x0 ip_summed=0 complete_sw=0 valid=0 level=0)
hash(0x0 sw=0 l4=0) proto=0x0000 pkttype=0 iif=0
dev name=sit0 feat=0x00000006401d7869
sk family=17 type=10 proto=0
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shannon Nelson [Tue, 2 May 2023 18:35:36 +0000 (11:35 -0700)]
ionic: catch failure from devlink_alloc
[ Upstream commit
4a54903ff68ddb33b6463c94b4eb37fc584ef760 ]
Add a check for NULL on the alloc return. If devlink_alloc() fails and
we try to use devlink_priv() on the NULL return, the kernel gets very
unhappy and panics. With this fix, the driver load will still fail,
but at least it won't panic the kernel.
Fixes: df69ba43217d ("ionic: Add basic framework for IONIC Network device driver")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ido Schimmel [Tue, 2 May 2023 12:20:50 +0000 (15:20 +0300)]
ethtool: Fix uninitialized number of lanes
[ Upstream commit
9ad685dbfe7e856bbf17a7177b64676d324d6ed7 ]
It is not possible to set the number of lanes when setting link modes
using the legacy IOCTL ethtool interface. Since 'struct
ethtool_link_ksettings' is not initialized in this path, drivers receive
an uninitialized number of lanes in 'struct
ethtool_link_ksettings::lanes'.
When this information is later queried from drivers, it results in the
ethtool code making decisions based on uninitialized memory, leading to
the following KMSAN splat [1]. In practice, this most likely only
happens with the tun driver that simply returns whatever it got in the
set operation.
As far as I can tell, this uninitialized memory is not leaked to user
space thanks to the 'ethtool_ops->cap_link_lanes_supported' check in
linkmodes_prepare_data().
Fix by initializing the structure in the IOCTL path. Did not find any
more call sites that pass an uninitialized structure when calling
'ethtool_ops::set_link_ksettings()'.
[1]
BUG: KMSAN: uninit-value in ethnl_update_linkmodes net/ethtool/linkmodes.c:273 [inline]
BUG: KMSAN: uninit-value in ethnl_set_linkmodes+0x190b/0x19d0 net/ethtool/linkmodes.c:333
ethnl_update_linkmodes net/ethtool/linkmodes.c:273 [inline]
ethnl_set_linkmodes+0x190b/0x19d0 net/ethtool/linkmodes.c:333
ethnl_default_set_doit+0x88d/0xde0 net/ethtool/netlink.c:640
genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline]
genl_rcv_msg+0x141a/0x14c0 net/netlink/genetlink.c:1065
netlink_rcv_skb+0x3f8/0x750 net/netlink/af_netlink.c:2577
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0xf41/0x1270 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x127d/0x1430 net/netlink/af_netlink.c:1942
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0xa24/0xe40 net/socket.c:2501
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555
__sys_sendmsg net/socket.c:2584 [inline]
__do_sys_sendmsg net/socket.c:2593 [inline]
__se_sys_sendmsg net/socket.c:2591 [inline]
__x64_sys_sendmsg+0x36b/0x540 net/socket.c:2591
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was stored to memory at:
tun_get_link_ksettings+0x37/0x60 drivers/net/tun.c:3544
__ethtool_get_link_ksettings+0x17b/0x260 net/ethtool/ioctl.c:441
ethnl_set_linkmodes+0xee/0x19d0 net/ethtool/linkmodes.c:327
ethnl_default_set_doit+0x88d/0xde0 net/ethtool/netlink.c:640
genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline]
genl_rcv_msg+0x141a/0x14c0 net/netlink/genetlink.c:1065
netlink_rcv_skb+0x3f8/0x750 net/netlink/af_netlink.c:2577
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0xf41/0x1270 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x127d/0x1430 net/netlink/af_netlink.c:1942
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0xa24/0xe40 net/socket.c:2501
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555
__sys_sendmsg net/socket.c:2584 [inline]
__do_sys_sendmsg net/socket.c:2593 [inline]
__se_sys_sendmsg net/socket.c:2591 [inline]
__x64_sys_sendmsg+0x36b/0x540 net/socket.c:2591
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was stored to memory at:
tun_set_link_ksettings+0x37/0x60 drivers/net/tun.c:3553
ethtool_set_link_ksettings+0x600/0x690 net/ethtool/ioctl.c:609
__dev_ethtool net/ethtool/ioctl.c:3024 [inline]
dev_ethtool+0x1db9/0x2a70 net/ethtool/ioctl.c:3078
dev_ioctl+0xb07/0x1270 net/core/dev_ioctl.c:524
sock_do_ioctl+0x295/0x540 net/socket.c:1213
sock_ioctl+0x729/0xd90 net/socket.c:1316
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0x222/0x400 fs/ioctl.c:856
__x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Local variable link_ksettings created at:
ethtool_set_link_ksettings+0x54/0x690 net/ethtool/ioctl.c:577
__dev_ethtool net/ethtool/ioctl.c:3024 [inline]
dev_ethtool+0x1db9/0x2a70 net/ethtool/ioctl.c:3078
Fixes: 012ce4dd3102 ("ethtool: Extend link modes settings uAPI with lanes")
Reported-and-tested-by: syzbot+ef6edd9f1baaa54d6235@syzkaller.appspotmail.com
Link: https://lore.kernel.org/netdev/0000000000004bb41105fa70f361@google.com/
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shannon Nelson [Tue, 2 May 2023 18:47:40 +0000 (11:47 -0700)]
ionic: remove noise from ethtool rxnfc error msg
[ Upstream commit
3711d44fac1f80ea69ecb7315fed05b3812a7401 ]
It seems that ethtool is calling into .get_rxnfc more often with
ETHTOOL_GRXCLSRLCNT which ionic doesn't know about. We don't
need to log a message about it, just return not supported.
Fixes: aa3198819bea6 ("ionic: Add RSS support")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Subbaraya Sundeep [Wed, 3 May 2023 07:09:44 +0000 (12:39 +0530)]
octeontx2-vf: Detach LF resources on probe cleanup
[ Upstream commit
99ae1260fdb5f15beab8a3adfb93a9041c87a2c1 ]
When a VF device probe fails due to error in MSIX vector allocation then
the resources NIX and NPA LFs were not detached. Fix this by detaching
the LFs when MSIX vector allocation fails.
Fixes: 3184fb5ba96e ("octeontx2-vf: Virtual function driver support")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Subbaraya Sundeep [Wed, 3 May 2023 07:09:43 +0000 (12:39 +0530)]
octeontx2-pf: Disable packet I/O for graceful exit
[ Upstream commit
c926252205c424c4842dbdbe02f8e3296f623204 ]
At the stage of enabling packet I/O in otx2_open, If mailbox
timeout occurs then interface ends up in down state where as
hardware packet I/O is enabled. Hence disable packet I/O also
before bailing out.
Fixes: 1ea0166da050 ("octeontx2-pf: Fix the device state on error")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ratheesh Kannoth [Wed, 3 May 2023 07:09:42 +0000 (12:39 +0530)]
octeontx2-af: Skip PFs if not enabled
[ Upstream commit
5eb1b7220948a69298a436148a735f32ec325289 ]
Firmware enables PFs and allocate mbox resources for each of the PFs.
Currently PF driver configures mbox resources without checking whether
PF is enabled or not. This results in crash. This patch fixes this issue
by skipping disabled PF's mbox initialization.
Fixes: 9bdc47a6e328 ("octeontx2-af: Mbox communication support btw AF and it's VFs")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ratheesh Kannoth [Wed, 3 May 2023 07:09:41 +0000 (12:39 +0530)]
octeontx2-af: Fix issues with NPC field hash extract
[ Upstream commit
f66155905959076619c9c519fb099e8ae6cb6f7b ]
1. Allow field hash configuration for both source and destination IPv6.
2. Configure hardware parser based on hash extract feature enable flag
for IPv6.
3. Fix IPv6 endianness issue while updating the source/destination IP
address via ntuple rule.
Fixes: 56d9f5fd2246 ("octeontx2-af: Use hashed field in MCAM key")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ratheesh Kannoth [Wed, 3 May 2023 07:09:40 +0000 (12:39 +0530)]
octeontx2-af: Update/Fix NPC field hash extract feature
[ Upstream commit
406bed11fb91a0b35c26fe633d8700febaec6439 ]
1. As per previous implementation, mask and control parameter to
generate the field hash value was not passed to the caller program.
Updated the secret key mbox to share that information as well,
as a part of the fix.
2. Earlier implementation did not consider hash reduction of both
source and destination IPv6 addresses. Only source IPv6 address
was considered. This fix solves that and provides option to hash
Fixes: 56d9f5fd2246 ("octeontx2-af: Use hashed field in MCAM key")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Suman Ghosh [Fri, 18 Nov 2022 05:33:29 +0000 (11:03 +0530)]
octeontx2-pf: Add additional checks while configuring ucast/bcast/mcast rules
[ Upstream commit
674b3e164238a31f236ac63f82d5d160f7d4c201 ]
1. If a profile does not support DMAC extraction then avoid installing NPC
flow rules for unicast. Similarly, if LXMB(L2 and L3) extraction is not
supported by the profile then avoid installing broadcast and multicast
rules.
2. Allow MCAM entry insertion for promiscuous mode.
3. For the profiles where DMAC is not extracted in MKEX key default
unicast entry installed by AF is not valid. Hence do not use action
from the AF installed default unicast entry for such cases.
4. Adjacent packet header fields in a packet like IP header source
and destination addresses or UDP/TCP header source port and destination
can be extracted together in MKEX profile. Therefore MKEX profile can be
configured to in two ways:
a. Total of 4 bytes from start of UDP header(src port
+ destination port)
or
b. Two bytes from start and two bytes from offset 2
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/20221118053329.2288486-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of:
406bed11fb91 ("octeontx2-af: Update/Fix NPC field hash extract feature")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Suman Ghosh [Mon, 31 Oct 2022 09:08:56 +0000 (14:38 +0530)]
octeontx2-af: Allow mkex profile without DMAC and add L2M/L2B header extraction support
[ Upstream commit
2cee6401c4eaa562abc1d437d5d03e80bbee79c1 ]
1. It is possible to have custom mkex profiles which do not extract
DMAC at all into the key. Hence allow mkex profiles which do not
have DMAC to be loaded into MCAM hardware. This patch also adds
debugging prints needed to identify profiles with wrong
configuration.
2. If a mkex profile set "l2l3mb" field for Rx interface,
then Rx multicast and broadcast entry should be configured.
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Link: https://lore.kernel.org/r/20221031090856.1404303-1-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of:
406bed11fb91 ("octeontx2-af: Update/Fix NPC field hash extract feature")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ratheesh Kannoth [Wed, 3 May 2023 07:09:37 +0000 (12:39 +0530)]
octeontx2-pf: Increase the size of dmac filter flows
[ Upstream commit
2a6eecc592b4d59a04d513aa25fc0f30d52100cd ]
CN10kb supports large number of dmac filter flows to be
inserted. Increase the field size to accommodate the same
Fixes: b747923afff8 ("octeontx2-af: Exact match support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ratheesh Kannoth [Wed, 3 May 2023 07:09:36 +0000 (12:39 +0530)]
octeontx2-af: Fix depth of cam and mem table.
[ Upstream commit
60999cb83554ebcf6cfff8894bc2c3d99ea858ba ]
In current driver, NPC cam and mem table sizes are read from wrong
register offset. This patch fixes the register offset so that correct
values are populated on read.
Fixes: b747923afff8 ("octeontx2-af: Exact match support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ratheesh Kannoth [Wed, 3 May 2023 07:09:35 +0000 (12:39 +0530)]
octeontx2-af: Fix start and end bit for scan config
[ Upstream commit
c60a6b90e7890453f09e0d2163d6acadabe3415b ]
In the current driver, NPC exact match feature was not getting
enabled as configured bit was not read properly.
for_each_set_bit_from() need end bit as one bit post
position in the bit map to read NPC exact nibble enable
bits properly. This patch fixes the same.
Fixes: b747923afff8 ("octeontx2-af: Exact match support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geetha sowjanya [Wed, 3 May 2023 07:09:34 +0000 (12:39 +0530)]
octeontx2-af: Secure APR table update with the lock
[ Upstream commit
048486f81d01db4d100af021ee2ea211d19732a0 ]
APR table contains the lmtst base address of PF/VFs. These entries
are updated by the PF/VF during the device probe. The lmtst address
is fetched from HW using "TXN_REQ" and "ADDR_RSP_STS" registers.
The lock tries to protect these registers from getting overwritten
when multiple PFs invokes rvu_get_lmtaddr() simultaneously.
For example, if PF1 submit the request and got permitted before it
reads the response and PF2 got scheduled submit the request then the
response of PF1 is overwritten by the PF2 response.
Fixes: 893ae97214c3 ("octeontx2-af: cn10k: Support configurable LMTST regions")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jeremy Sowden [Tue, 25 Apr 2023 21:11:39 +0000 (22:11 +0100)]
selftests: netfilter: fix libmnl pkg-config usage
[ Upstream commit
de4773f0235acf74554f6a64ea60adc0d7b01895 ]
1. Don't hard-code pkg-config
2. Remove distro-specific default for CFLAGS
3. Use pkg-config for LDLIBS
Fixes: a50a88f026fb ("selftests: netfilter: fix a build error on openSUSE")
Suggested-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Radhakrishna Sripada [Thu, 20 Apr 2023 22:12:47 +0000 (15:12 -0700)]
drm/i915/mtl: Add the missing CPU transcoder mask in intel_device_info
[ Upstream commit
6ece90e3665a9b7fb2637fcca26cebd42991580b ]
CPU transcoder mask is used to iterate over the available
CPU transcoders in the macro for_each_cpu_transcoder().
The macro is broken on MTL and got highlighted when audio
state was being tracked for each transcoder added in [1].
Add the missing CPU transcoder mask which is similar to ADL-P
mask but without DSI transcoders.
[1]: https://patchwork.freedesktop.org/patch/523723/
Fixes: 7835303982d1 ("drm/i915/mtl: Add MeteorLake PCI IDs")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Acked-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420221248.2511314-1-radhakrishna.sripada@intel.com
(cherry picked from commit
bddc18913bd44adae5c828fd514d570f43ba1576)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guo Ren [Mon, 1 May 2023 22:33:54 +0000 (15:33 -0700)]
riscv: compat_syscall_table: Fixup compile warning
[ Upstream commit
f9c4bbddece7eff1155c70d48e3c9c2a01b9d778 ]
../arch/riscv/kernel/compat_syscall_table.c:12:41: warning: initialized
field overwritten [-Woverride-init]
12 | #define __SYSCALL(nr, call) [nr] = (call),
| ^
../include/uapi/asm-generic/unistd.h:567:1: note: in expansion of macro
'__SYSCALL'
567 | __SYSCALL(__NR_semget, sys_semget)
Fixes: 59c10c52f573 ("riscv: compat: syscall: Add compat_sys_call_table implementation")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Link: https://lore.kernel.org/r/20230501223353.2833899-1-dfustini@baylibre.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Fri, 28 Apr 2023 20:27:54 +0000 (21:27 +0100)]
rxrpc: Fix hard call timeout units
[ Upstream commit
0d098d83c5d9e107b2df7f5e11f81492f56d2fe7 ]
The hard call timeout is specified in the RXRPC_SET_CALL_TIMEOUT cmsg in
seconds, so fix the point at which sendmsg() applies it to the call to
convert to jiffies from seconds, not milliseconds.
Fixes: a158bdd3247b ("rxrpc: Fix timeout of a call that hasn't yet been granted a channel")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Moreton [Fri, 28 Apr 2023 11:33:33 +0000 (12:33 +0100)]
sfc: Fix module EEPROM reporting for QSFP modules
[ Upstream commit
281900a923d4c50df109b52a22ae3cdac150159b ]
The sfc driver does not report QSFP module EEPROM contents correctly
as only the first page is fetched from hardware.
Commit
0e1a2a3e6e7d ("ethtool: Add SFF-8436 and SFF-8636 max EEPROM
length definitions") added ETH_MODULE_SFF_8436_MAX_LEN for the overall
size of the EEPROM info, so use that to report the full EEPROM contents.
Fixes: 9b17010da57a ("sfc: Add ethtool -m support for QSFP modules")
Signed-off-by: Andy Moreton <andy.moreton@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hayes Wang [Fri, 28 Apr 2023 08:53:31 +0000 (16:53 +0800)]
r8152: move setting r8153b_rx_agg_chg_indicate()
[ Upstream commit
cce8334f4aacd9936309a002d4a4de92a07cd2c2 ]
Move setting r8153b_rx_agg_chg_indicate() for 2.5G devices. The
r8153b_rx_agg_chg_indicate() has to be called after enabling tx/rx.
Otherwise, the coalescing settings are useless.
Fixes: 195aae321c82 ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hayes Wang [Fri, 28 Apr 2023 08:53:30 +0000 (16:53 +0800)]
r8152: fix the poor throughput for 2.5G devices
[ Upstream commit
61b0ad6f58e2066e054c6d4839d67974d2861a7d ]
Fix the poor throughput for 2.5G devices, when changing the speed from
auto mode to force mode. This patch is used to notify the MAC when the
mode is changed.
Fixes: 195aae321c82 ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hayes Wang [Fri, 28 Apr 2023 08:53:29 +0000 (16:53 +0800)]
r8152: fix flow control issue of RTL8156A
[ Upstream commit
8ceda6d5a1e5402fd852e6cc59a286ce3dc545ee ]
The feature of flow control becomes abnormal, if the device sends a
pause frame and the tx/rx is disabled before sending a release frame. It
causes the lost of packets.
Set PLA_RX_FIFO_FULL and PLA_RX_FIFO_EMPTY to zeros before disabling the
tx/rx. And, toggle FC_PATCH_TASK before enabling tx/rx to reset the flow
control patch and timer. Then, the hardware could clear the state and
the flow control becomes normal after enabling tx/rx.
Besides, remove inline for fc_pause_on_auto() and fc_pause_off_auto().
Fixes: 195aae321c82 ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Victor Nogueira [Wed, 26 Apr 2023 15:19:40 +0000 (15:19 +0000)]
net/sched: act_mirred: Add carrier check
[ Upstream commit
526f28bd0fbdc699cda31426928802650c1528e5 ]
There are cases where the device is adminstratively UP, but operationally
down. For example, we have a physical device (Nvidia ConnectX-6 Dx, 25Gbps)
who's cable was pulled out, here is its ip link output:
5: ens2f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether b8:ce:f6:4b:68:35 brd ff:ff:ff:ff:ff:ff
altname enp179s0f1np1
As you can see, it's administratively UP but operationally down.
In this case, sending a packet to this port caused a nasty kernel hang (so
nasty that we were unable to capture it). Aborting a transmit based on
operational status (in addition to administrative status) fixes the issue.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
v1->v2: Add fixes tag
v2->v3: Remove blank line between tags + add change log, suggested by Leon
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Akhil R [Thu, 27 Apr 2023 12:39:14 +0000 (18:09 +0530)]
i2c: tegra: Fix PEC support for SMBUS block read
[ Upstream commit
9f855779a3874eee70e9f6be57b5f7774f14e510 ]
Update the msg->len value correctly for SMBUS block read. The discrepancy
went unnoticed as msg->len is used in SMBUS transfers only when a PEC
byte is added.
Fixes: d7583c8a5748 ("i2c: tegra: Add SMBus block read function")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sia Jee Heng [Thu, 30 Mar 2023 06:43:20 +0000 (14:43 +0800)]
RISC-V: mm: Enable huge page support to kernel_page_present() function
[ Upstream commit
a15c90b67a662c75f469822a7f95c7aaa049e28f ]
Currently kernel_page_present() function doesn't support huge page
detection causes the function to mistakenly return false to the
hibernation core.
Add huge page detection to the function to solve the problem.
Fixes: 9e953cda5cdf ("riscv: Introduce huge page support for 32/64bit kernel")
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230330064321.1008373-4-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Wed, 26 Apr 2023 06:52:48 +0000 (08:52 +0200)]
watchdog: dw_wdt: Fix the error handling path of dw_wdt_drv_probe()
[ Upstream commit
7f5390750645756bd5da2b24fac285f2654dd922 ]
The commit in Fixes has only updated the remove function and missed the
error handling path of the probe.
Add the missing reset_control_assert() call.
Fixes: 65a3b6935d92 ("watchdog: dw_wdt: get reset lines from dt")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/fbb650650bbb33a8fa2fd028c23157bedeed50e1.1682491863.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tao Su [Fri, 28 Apr 2023 04:51:49 +0000 (12:51 +0800)]
block: Skip destroyed blkg when restart in blkg_destroy_all()
[ Upstream commit
8176080d59e6d4ff9fc97ae534063073b4f7a715 ]
Kernel hang in blkg_destroy_all() when total blkg greater than
BLKG_DESTROY_BATCH_SIZE, because of not removing destroyed blkg in
blkg_list. So the size of blkg_list is same after destroying a
batch of blkg, and the infinite 'restart' occurs.
Since blkg should stay on the queue list until blkg_free_workfn(),
skip destroyed blkg when restart a new round, which will solve this
kernel hang issue and satisfy the previous will to restart.
Reported-by: Xiangfei Ma <xiangfeix.ma@intel.com>
Tested-by: Xiangfei Ma <xiangfeix.ma@intel.com>
Tested-by: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Fixes: f1c006f1c685 ("blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()")
Suggested-and-reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230428045149.1310073-1-tao1.su@linux.intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maxim Korotkov [Thu, 19 Jan 2023 10:44:43 +0000 (13:44 +0300)]
writeback: fix call of incorrect macro
[ Upstream commit
3e46c89c74f2c38e5337d2cf44b0b551adff1cb4 ]
the variable 'history' is of type u16, it may be an error
that the hweight32 macro was used for it
I guess macro hweight16 should be used
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 2a81490811d0 ("writeback: implement foreign cgroup inode detection")
Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230119104443.3002-1-korotkov.maxim.s@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Angelo Dureghello [Wed, 26 Apr 2023 20:28:15 +0000 (22:28 +0200)]
net: dsa: mv88e6xxx: add mv88e6321 rsvd2cpu
[ Upstream commit
6686317855c6997671982d4489ccdd946f644957 ]
Add rsvd2cpu capability for mv88e6321 model, to allow proper bpdu
processing.
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Fixes: 51c901a775621 ("net: dsa: mv88e6xxx: distinguish Global 2 Rsvd2CPU")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Antoine Tenart [Thu, 27 Apr 2023 09:21:59 +0000 (11:21 +0200)]
net: ipv6: fix skb hash for some RST packets
[ Upstream commit
dc6456e938e938d64ffb6383a286b2ac9790a37f ]
The skb hash comes from sk->sk_txhash when using TCP, except for some
IPv6 RST packets. This is because in tcp_v6_send_reset when not in
TIME_WAIT the hash is taken from sk->sk_hash, while it should come from
sk->sk_txhash as those two hashes are not computed the same way.
Packetdrill script to test the above,
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0
+0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress)
+0 > (flowlabel 0x1) S 0:0(0) <...>
// Wrong ack seq, trigger a rst.
+0 < S. 0:0(0) ack 0 win 4000
// Check the flowlabel matches prior one from SYN.
+0 > (flowlabel 0x1) R 0:0(0) <...>
Fixes: 9258b8b1be2e ("ipv6: tcp: send consistent autoflowlabel in RST packets")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrea Mayer [Thu, 27 Apr 2023 09:49:23 +0000 (11:49 +0200)]
selftests: srv6: make srv6_end_dt46_l3vpn_test more robust
[ Upstream commit
46ef24c60f8ee70662968ac55325297ed4624d61 ]
On some distributions, the rp_filter is automatically set (=1) by
default on a netdev basis (also on VRFs).
In an SRv6 End.DT46 behavior, decapsulated IPv4 packets are routed using
the table associated with the VRF bound to that tunnel. During lookup
operations, the rp_filter can lead to packet loss when activated on the
VRF.
Therefore, we chose to make this selftest more robust by explicitly
disabling the rp_filter during tests (as it is automatically set by some
Linux distributions).
Fixes: 03a0b567a03d ("selftests: seg6: add selftest for SRv6 End.DT46 Behavior")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cong Wang [Thu, 27 Apr 2023 06:00:06 +0000 (23:00 -0700)]
sit: update dev->needed_headroom in ipip6_tunnel_bind_dev()
[ Upstream commit
c88f8d5cd95fd039cff95d682b8e71100c001df0 ]
When a tunnel device is bound with the underlying device, its
dev->needed_headroom needs to be updated properly. IPv4 tunnels
already do the same in ip_tunnel_bind_dev(). Otherwise we may
not have enough header room for skb, especially after commit
b17f709a2401 ("gue: TX support for using remote checksum offload option").
Fixes: 32b8a8e59c9c ("sit: add IPv4 over IPv4 support")
Reported-by: Palash Oswal <oswalpalash@gmail.com>
Link: https://lore.kernel.org/netdev/CAGyP=7fDcSPKu6nttbGwt7RXzE3uyYxLjCSE97J64pRxJP8jPA@mail.gmail.com/
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vlad Buslov [Wed, 26 Apr 2023 12:31:11 +0000 (14:31 +0200)]
net/sched: cls_api: remove block_cb from driver_list before freeing
[ Upstream commit
da94a7781fc3c92e7df7832bc2746f4d39bc624e ]
Error handler of tcf_block_bind() frees the whole bo->cb_list on error.
However, by that time the flow_block_cb instances are already in the driver
list because driver ndo_setup_tc() callback is called before that up the
call chain in tcf_block_offload_cmd(). This leaves dangling pointers to
freed objects in the list and causes use-after-free[0]. Fix it by also
removing flow_block_cb instances from driver_list before deallocating them.
[0]:
[ 279.868433] ==================================================================
[ 279.869964] BUG: KASAN: slab-use-after-free in flow_block_cb_setup_simple+0x631/0x7c0
[ 279.871527] Read of size 8 at addr
ffff888147e2bf20 by task tc/2963
[ 279.873151] CPU: 6 PID: 2963 Comm: tc Not tainted 6.3.0-rc6+ #4
[ 279.874273] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 279.876295] Call Trace:
[ 279.876882] <TASK>
[ 279.877413] dump_stack_lvl+0x33/0x50
[ 279.878198] print_report+0xc2/0x610
[ 279.878987] ? flow_block_cb_setup_simple+0x631/0x7c0
[ 279.879994] kasan_report+0xae/0xe0
[ 279.880750] ? flow_block_cb_setup_simple+0x631/0x7c0
[ 279.881744] ? mlx5e_tc_reoffload_flows_work+0x240/0x240 [mlx5_core]
[ 279.883047] flow_block_cb_setup_simple+0x631/0x7c0
[ 279.884027] tcf_block_offload_cmd.isra.0+0x189/0x2d0
[ 279.885037] ? tcf_block_setup+0x6b0/0x6b0
[ 279.885901] ? mutex_lock+0x7d/0xd0
[ 279.886669] ? __mutex_unlock_slowpath.constprop.0+0x2d0/0x2d0
[ 279.887844] ? ingress_init+0x1c0/0x1c0 [sch_ingress]
[ 279.888846] tcf_block_get_ext+0x61c/0x1200
[ 279.889711] ingress_init+0x112/0x1c0 [sch_ingress]
[ 279.890682] ? clsact_init+0x2b0/0x2b0 [sch_ingress]
[ 279.891701] qdisc_create+0x401/0xea0
[ 279.892485] ? qdisc_tree_reduce_backlog+0x470/0x470
[ 279.893473] tc_modify_qdisc+0x6f7/0x16d0
[ 279.894344] ? tc_get_qdisc+0xac0/0xac0
[ 279.895213] ? mutex_lock+0x7d/0xd0
[ 279.896005] ? __mutex_lock_slowpath+0x10/0x10
[ 279.896910] rtnetlink_rcv_msg+0x5fe/0x9d0
[ 279.897770] ? rtnl_calcit.isra.0+0x2b0/0x2b0
[ 279.898672] ? __sys_sendmsg+0xb5/0x140
[ 279.899494] ? do_syscall_64+0x3d/0x90
[ 279.900302] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 279.901337] ? kasan_save_stack+0x2e/0x40
[ 279.902177] ? kasan_save_stack+0x1e/0x40
[ 279.903058] ? kasan_set_track+0x21/0x30
[ 279.903913] ? kasan_save_free_info+0x2a/0x40
[ 279.904836] ? ____kasan_slab_free+0x11a/0x1b0
[ 279.905741] ? kmem_cache_free+0x179/0x400
[ 279.906599] netlink_rcv_skb+0x12c/0x360
[ 279.907450] ? rtnl_calcit.isra.0+0x2b0/0x2b0
[ 279.908360] ? netlink_ack+0x1550/0x1550
[ 279.909192] ? rhashtable_walk_peek+0x170/0x170
[ 279.910135] ? kmem_cache_alloc_node+0x1af/0x390
[ 279.911086] ? _copy_from_iter+0x3d6/0xc70
[ 279.912031] netlink_unicast+0x553/0x790
[ 279.912864] ? netlink_attachskb+0x6a0/0x6a0
[ 279.913763] ? netlink_recvmsg+0x416/0xb50
[ 279.914627] netlink_sendmsg+0x7a1/0xcb0
[ 279.915473] ? netlink_unicast+0x790/0x790
[ 279.916334] ? iovec_from_user.part.0+0x4d/0x220
[ 279.917293] ? netlink_unicast+0x790/0x790
[ 279.918159] sock_sendmsg+0xc5/0x190
[ 279.918938] ____sys_sendmsg+0x535/0x6b0
[ 279.919813] ? import_iovec+0x7/0x10
[ 279.920601] ? kernel_sendmsg+0x30/0x30
[ 279.921423] ? __copy_msghdr+0x3c0/0x3c0
[ 279.922254] ? import_iovec+0x7/0x10
[ 279.923041] ___sys_sendmsg+0xeb/0x170
[ 279.923854] ? copy_msghdr_from_user+0x110/0x110
[ 279.924797] ? ___sys_recvmsg+0xd9/0x130
[ 279.925630] ? __perf_event_task_sched_in+0x183/0x470
[ 279.926656] ? ___sys_sendmsg+0x170/0x170
[ 279.927529] ? ctx_sched_in+0x530/0x530
[ 279.928369] ? update_curr+0x283/0x4f0
[ 279.929185] ? perf_event_update_userpage+0x570/0x570
[ 279.930201] ? __fget_light+0x57/0x520
[ 279.931023] ? __switch_to+0x53d/0xe70
[ 279.931846] ? sockfd_lookup_light+0x1a/0x140
[ 279.932761] __sys_sendmsg+0xb5/0x140
[ 279.933560] ? __sys_sendmsg_sock+0x20/0x20
[ 279.934436] ? fpregs_assert_state_consistent+0x1d/0xa0
[ 279.935490] do_syscall_64+0x3d/0x90
[ 279.936300] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 279.937311] RIP: 0033:0x7f21c814f887
[ 279.938085] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[ 279.941448] RSP: 002b:
00007fff11efd478 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
[ 279.942964] RAX:
ffffffffffffffda RBX:
0000000064401979 RCX:
00007f21c814f887
[ 279.944337] RDX:
0000000000000000 RSI:
00007fff11efd4e0 RDI:
0000000000000003
[ 279.945660] RBP:
0000000000000000 R08:
0000000000000001 R09:
0000000000000000
[ 279.947003] R10:
00007f21c8008708 R11:
0000000000000246 R12:
0000000000000001
[ 279.948345] R13:
0000000000409980 R14:
000000000047e538 R15:
0000000000485400
[ 279.949690] </TASK>
[ 279.950706] Allocated by task 2960:
[ 279.951471] kasan_save_stack+0x1e/0x40
[ 279.952338] kasan_set_track+0x21/0x30
[ 279.953165] __kasan_kmalloc+0x77/0x90
[ 279.954006] flow_block_cb_setup_simple+0x3dd/0x7c0
[ 279.955001] tcf_block_offload_cmd.isra.0+0x189/0x2d0
[ 279.956020] tcf_block_get_ext+0x61c/0x1200
[ 279.956881] ingress_init+0x112/0x1c0 [sch_ingress]
[ 279.957873] qdisc_create+0x401/0xea0
[ 279.958656] tc_modify_qdisc+0x6f7/0x16d0
[ 279.959506] rtnetlink_rcv_msg+0x5fe/0x9d0
[ 279.960392] netlink_rcv_skb+0x12c/0x360
[ 279.961216] netlink_unicast+0x553/0x790
[ 279.962044] netlink_sendmsg+0x7a1/0xcb0
[ 279.962906] sock_sendmsg+0xc5/0x190
[ 279.963702] ____sys_sendmsg+0x535/0x6b0
[ 279.964534] ___sys_sendmsg+0xeb/0x170
[ 279.965343] __sys_sendmsg+0xb5/0x140
[ 279.966132] do_syscall_64+0x3d/0x90
[ 279.966908] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 279.968407] Freed by task 2960:
[ 279.969114] kasan_save_stack+0x1e/0x40
[ 279.969929] kasan_set_track+0x21/0x30
[ 279.970729] kasan_save_free_info+0x2a/0x40
[ 279.971603] ____kasan_slab_free+0x11a/0x1b0
[ 279.972483] __kmem_cache_free+0x14d/0x280
[ 279.973337] tcf_block_setup+0x29d/0x6b0
[ 279.974173] tcf_block_offload_cmd.isra.0+0x226/0x2d0
[ 279.975186] tcf_block_get_ext+0x61c/0x1200
[ 279.976080] ingress_init+0x112/0x1c0 [sch_ingress]
[ 279.977065] qdisc_create+0x401/0xea0
[ 279.977857] tc_modify_qdisc+0x6f7/0x16d0
[ 279.978695] rtnetlink_rcv_msg+0x5fe/0x9d0
[ 279.979562] netlink_rcv_skb+0x12c/0x360
[ 279.980388] netlink_unicast+0x553/0x790
[ 279.981214] netlink_sendmsg+0x7a1/0xcb0
[ 279.982043] sock_sendmsg+0xc5/0x190
[ 279.982827] ____sys_sendmsg+0x535/0x6b0
[ 279.983703] ___sys_sendmsg+0xeb/0x170
[ 279.984510] __sys_sendmsg+0xb5/0x140
[ 279.985298] do_syscall_64+0x3d/0x90
[ 279.986076] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 279.987532] The buggy address belongs to the object at
ffff888147e2bf00
which belongs to the cache kmalloc-192 of size 192
[ 279.989747] The buggy address is located 32 bytes inside of
freed 192-byte region [
ffff888147e2bf00,
ffff888147e2bfc0)
[ 279.992367] The buggy address belongs to the physical page:
[ 279.993430] page:
00000000550f405c refcount:1 mapcount:0 mapping:
0000000000000000 index:0x0 pfn:0x147e2a
[ 279.995182] head:
00000000550f405c order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 279.996713] anon flags: 0x200000000010200(slab|head|node=0|zone=2)
[ 279.997878] raw:
0200000000010200 ffff888100042a00 0000000000000000 dead000000000001
[ 279.999384] raw:
0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
[ 280.000894] page dumped because: kasan: bad access detected
[ 280.002386] Memory state around the buggy address:
[ 280.003338]
ffff888147e2be00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 280.004781]
ffff888147e2be80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 280.006224] >
ffff888147e2bf00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 280.007700] ^
[ 280.008592]
ffff888147e2bf80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
[ 280.010035]
ffff888147e2c000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 280.011564] ==================================================================
Fixes: 59094b1e5094 ("net: sched: use flow block API")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Fri, 28 Apr 2023 04:32:31 +0000 (04:32 +0000)]
tcp: fix skb_copy_ubufs() vs BIG TCP
[ Upstream commit
7e692df3933628d974acb9f5b334d2b3e885e2a6 ]
David Ahern reported crashes in skb_copy_ubufs() caused by TCP tx zerocopy
using hugepages, and skb length bigger than ~68 KB.
skb_copy_ubufs() assumed it could copy all payload using up to
MAX_SKB_FRAGS order-0 pages.
This assumption broke when BIG TCP was able to put up to 512 KB per skb.
We did not hit this bug at Google because we use CONFIG_MAX_SKB_FRAGS=45
and limit gso_max_size to 180000.
A solution is to use higher order pages if needed.
v2: add missing __GFP_COMP, or we leak memory.
Fixes: 7c4e983c4f3c ("net: allow gso_max_size to exceed 65536")
Reported-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/netdev/c70000f6-baa4-4a05-46d0-4b3e0dc1ccc8@gmail.com/T/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cosmo Chou [Wed, 26 Apr 2023 08:13:50 +0000 (16:13 +0800)]
net/ncsi: clear Tx enable mode when handling a Config required AEN
[ Upstream commit
6f75cd166a5a3c0bc50441faa8b8304f60522fdd ]
ncsi_channel_is_tx() determines whether a given channel should be
used for Tx or not. However, when reconfiguring the channel by
handling a Configuration Required AEN, there is a misjudgment that
the channel Tx has already been enabled, which results in the Enable
Channel Network Tx command not being sent.
Clear the channel Tx enable flag before reconfiguring the channel to
avoid the misjudgment.
Fixes: 8d951a75d022 ("net/ncsi: Configure multi-package, multi-channel modes with failover")
Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Subbaraya Sundeep [Wed, 26 Apr 2023 06:25:28 +0000 (11:55 +0530)]
octeontx2-pf: mcs: Do not reset PN while updating secy
[ Upstream commit
3c99bace4ad08ad0264285ba8ad73117560992c2 ]
After creating SecYs, SCs and SAs a SecY can be modified
to change attributes like validation mode, protect frames
mode etc. During this SecY update, packet number is reset to
initial user given value by mistake. Hence do not reset
PN when updating SecY parameters.
Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Subbaraya Sundeep [Wed, 26 Apr 2023 06:25:27 +0000 (11:55 +0530)]
octeontx2-pf: mcs: Fix shared counters logic
[ Upstream commit
9bdfe61054fb2b989eb58df20bf99c0cf67e3038 ]
Macsec stats like InPktsLate and InPktsDelayed share
same counter in hardware. If SecY replay_protect is true
then counter represents InPktsLate otherwise InPktsDelayed.
This mode change was tracked based on protect_frames
instead of replay_protect mistakenly. Similarly InPktsUnchecked
and InPktsOk share same counter and mode change was tracked
based on validate_check instead of validate_disabled.
This patch fixes those problems.
Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Subbaraya Sundeep [Wed, 26 Apr 2023 06:25:26 +0000 (11:55 +0530)]
octeontx2-pf: mcs: Clear stats before freeing resource
[ Upstream commit
815debbbf7b52026462c37eea3be70d6377a7a9a ]
When freeing MCS hardware resources like SecY, SC and
SA the corresponding stats needs to be cleared. Otherwise
previous stats are shown in newly created macsec interfaces.
Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Subbaraya Sundeep [Wed, 26 Apr 2023 06:25:25 +0000 (11:55 +0530)]
octeontx2-pf: mcs: Match macsec ethertype along with DMAC
[ Upstream commit
57d00d4364f314485092667d2a48718985515deb ]
On CN10KB silicon a single hardware macsec block is
present and offloads macsec operations for all the
ethernet LMACs. TCAM match with macsec ethertype 0x88e5
alone at RX side is not sufficient to distinguish all the
macsec interfaces created on top of netdevs. Hence append
the DMAC of the macsec interface too. Otherwise the first
created macsec interface only receives all the macsec traffic.
Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Subbaraya Sundeep [Wed, 26 Apr 2023 06:25:24 +0000 (11:55 +0530)]
octeontx2-pf: mcs: Fix NULL pointer dereferences
[ Upstream commit
699af748c61574125d269db260dabbe20436d74e ]
When system is rebooted after creating macsec interface
below NULL pointer dereference crashes occurred. This
patch fixes those crashes by using correct order of teardown
[ 3324.406942] Unable to handle kernel NULL pointer dereference at virtual address
0000000000000000
[ 3324.415726] Mem abort info:
[ 3324.418510] ESR = 0x96000006
[ 3324.421557] EC = 0x25: DABT (current EL), IL = 32 bits
[ 3324.426865] SET = 0, FnV = 0
[ 3324.429913] EA = 0, S1PTW = 0
[ 3324.433047] Data abort info:
[ 3324.435921] ISV = 0, ISS = 0x00000006
[ 3324.439748] CM = 0, WnR = 0
....
[ 3324.575915] Call trace:
[ 3324.578353] cn10k_mdo_del_secy+0x24/0x180
[ 3324.582440] macsec_common_dellink+0xec/0x120
[ 3324.586788] macsec_notify+0x17c/0x1c0
[ 3324.590529] raw_notifier_call_chain+0x50/0x70
[ 3324.594965] call_netdevice_notifiers_info+0x34/0x7c
[ 3324.599921] rollback_registered_many+0x354/0x5bc
[ 3324.604616] unregister_netdevice_queue+0x88/0x10c
[ 3324.609399] unregister_netdev+0x20/0x30
[ 3324.613313] otx2_remove+0x8c/0x310
[ 3324.616794] pci_device_shutdown+0x30/0x70
[ 3324.620882] device_shutdown+0x11c/0x204
[ 966.664930] Unable to handle kernel NULL pointer dereference at virtual address
0000000000000000
[ 966.673712] Mem abort info:
[ 966.676497] ESR = 0x96000006
[ 966.679543] EC = 0x25: DABT (current EL), IL = 32 bits
[ 966.684848] SET = 0, FnV = 0
[ 966.687895] EA = 0, S1PTW = 0
[ 966.691028] Data abort info:
[ 966.693900] ISV = 0, ISS = 0x00000006
[ 966.697729] CM = 0, WnR = 0
[ 966.833467] Call trace:
[ 966.835904] cn10k_mdo_stop+0x20/0xa0
[ 966.839557] macsec_dev_stop+0xe8/0x11c
[ 966.843384] __dev_close_many+0xbc/0x140
[ 966.847298] dev_close_many+0x84/0x120
[ 966.851039] rollback_registered_many+0x114/0x5bc
[ 966.855735] unregister_netdevice_many.part.0+0x14/0xa0
[ 966.860952] unregister_netdevice_many+0x18/0x24
[ 966.865560] macsec_notify+0x1ac/0x1c0
[ 966.869303] raw_notifier_call_chain+0x50/0x70
[ 966.873738] call_netdevice_notifiers_info+0x34/0x7c
[ 966.878694] rollback_registered_many+0x354/0x5bc
[ 966.883390] unregister_netdevice_queue+0x88/0x10c
[ 966.888173] unregister_netdev+0x20/0x30
[ 966.892090] otx2_remove+0x8c/0x310
[ 966.895571] pci_device_shutdown+0x30/0x70
[ 966.899660] device_shutdown+0x11c/0x204
[ 966.903574] __do_sys_reboot+0x208/0x290
[ 966.907487] __arm64_sys_reboot+0x20/0x30
[ 966.911489] el0_svc_handler+0x80/0x1c0
[ 966.915316] el0_svc+0x8/0x180
[ 966.918362] Code:
f9400000 f9400a64 91220014 f94b3403 (
f9400060)
[ 966.924448] ---[ end trace
341778e799c3d8d7 ]---
Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geetha sowjanya [Wed, 26 Apr 2023 06:25:23 +0000 (11:55 +0530)]
octeontx2-af: mcs: Fix MCS block interrupt
[ Upstream commit
b8aebeaaf9ffb1e99c642eb3751e28981f9be475 ]
On CN10KB, MCS IP vector number, BBE and PAB interrupt mask
got changed to support more block level interrupts.
To address this changes, this patch fixes the bbe and pab
interrupt handlers.
Fixes: 6c635f78c474 ("octeontx2-af: cn10k: mcs: Handle MCS block interrupts")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geetha sowjanya [Wed, 26 Apr 2023 06:25:22 +0000 (11:55 +0530)]
octeontx2-af: mcs: Config parser to skip 8B header
[ Upstream commit
65cdc2b637a5749c7dec0ce14fe2c48f1f91f671 ]
When ptp timestamp is enabled in RPM, RPM will append 8B
timestamp header for all RX traffic. MCS need to skip these
8 bytes header while parsing the packet header, so that
correct tcam key is created for lookup.
This patch fixes the mcs parser configuration to skip this
8B header for ptp packets.
Fixes: ca7f49ff8846 ("octeontx2-af: cn10k: Introduce driver for macsec block.")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Subbaraya Sundeep [Wed, 26 Apr 2023 06:25:21 +0000 (11:55 +0530)]
octeontx2-af: mcs: Write TCAM_DATA and TCAM_MASK registers at once
[ Upstream commit
b51612198603fce33d6cf57b4864e3018a1cd9b8 ]
As per hardware errata on CN10KB, all the four TCAM_DATA
and TCAM_MASK registers has to be written at once otherwise
write to individual registers will fail. Hence write to all
TCAM_DATA registers and then to all TCAM_MASK registers.
Fixes: cfc14181d497 ("octeontx2-af: cn10k: mcs: Manage the MCS block hardware resources")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geetha sowjanya [Wed, 26 Apr 2023 06:25:20 +0000 (11:55 +0530)]
octeonxt2-af: mcs: Fix per port bypass config
[ Upstream commit
c222b292a3568754828ffd30338d2909b14ed160 ]
For each lmac port, MCS has two MCS_TOP_SLAVE_CHANNEL_CONFIGX
registers. For CN10KB both register need to be configured for the
port level mcs bypass to work. This patch also sets bitmap
of flowid/secy entry reserved for default bypass so that these
entries can be shown in debugfs.
Fixes: bd69476e86fc ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Hickey [Tue, 25 Apr 2023 17:03:08 +0000 (10:03 -0700)]
ixgbe: Fix panic during XDP_TX with > 64 CPUs
[ Upstream commit
c23ae5091a8b3e50fe755257df020907e7c029bb ]
Commit
4fe815850bdc ("ixgbe: let the xdpdrv work with more than 64 cpus")
adds support to allow XDP programs to run on systems with more than
64 CPUs by locking the XDP TX rings and indexing them using cpu % 64
(IXGBE_MAX_XDP_QS).
Upon trying this out patch on a system with more than 64 cores,
the kernel paniced with an array-index-out-of-bounds at the return in
ixgbe_determine_xdp_ring in ixgbe.h, which means ixgbe_determine_xdp_q_idx
was just returning the cpu instead of cpu % IXGBE_MAX_XDP_QS. An example
splat:
==========================================================================
UBSAN: array-index-out-of-bounds in
/var/lib/dkms/ixgbe/5.18.6+focal-1/build/src/ixgbe.h:1147:26
index 65 is out of range for type 'ixgbe_ring *[64]'
==========================================================================
BUG: kernel NULL pointer dereference, address:
0000000000000058
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 65 PID: 408 Comm: ksoftirqd/65
Tainted: G IOE 5.15.0-48-generic #54~20.04.1-Ubuntu
Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.5.4 01/13/2020
RIP: 0010:ixgbe_xmit_xdp_ring+0x1b/0x1c0 [ixgbe]
Code: 3b 52 d4 cf e9 42 f2 ff ff 66 0f 1f 44 00 00 0f 1f 44 00 00 55 b9
00 00 00 00 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 08 <44> 0f b7
47 58 0f b7 47 5a 0f b7 57 54 44 0f b7 76 08 66 41 39 c0
RSP: 0018:
ffffbc3fcd88fcb0 EFLAGS:
00010282
RAX:
ffff92a253260980 RBX:
ffffbc3fe68b00a0 RCX:
0000000000000000
RDX:
ffff928b5f659000 RSI:
ffff928b5f659000 RDI:
0000000000000000
RBP:
ffffbc3fcd88fce0 R08:
ffff92b9dfc20580 R09:
0000000000000001
R10:
3d3d3d3d3d3d3d3d R11:
3d3d3d3d3d3d3d3d R12:
0000000000000000
R13:
ffff928b2f0fa8c0 R14:
ffff928b9be20050 R15:
000000000000003c
FS:
0000000000000000(0000) GS:
ffff92b9dfc00000(0000)
knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000058 CR3:
000000011dd6a002 CR4:
00000000007706e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
PKRU:
55555554
Call Trace:
<TASK>
ixgbe_poll+0x103e/0x1280 [ixgbe]
? sched_clock_cpu+0x12/0xe0
__napi_poll+0x30/0x160
net_rx_action+0x11c/0x270
__do_softirq+0xda/0x2ee
run_ksoftirqd+0x2f/0x50
smpboot_thread_fn+0xb7/0x150
? sort_range+0x30/0x30
kthread+0x127/0x150
? set_kthread_struct+0x50/0x50
ret_from_fork+0x1f/0x30
</TASK>
I think this is how it happens:
Upon loading the first XDP program on a system with more than 64 CPUs,
ixgbe_xdp_locking_key is incremented in ixgbe_xdp_setup. However,
immediately after this, the rings are reconfigured by ixgbe_setup_tc.
ixgbe_setup_tc calls ixgbe_clear_interrupt_scheme which calls
ixgbe_free_q_vectors which calls ixgbe_free_q_vector in a loop.
ixgbe_free_q_vector decrements ixgbe_xdp_locking_key once per call if
it is non-zero. Commenting out the decrement in ixgbe_free_q_vector
stopped my system from panicing.
I suspect to make the original patch work, I would need to load an XDP
program and then replace it in order to get ixgbe_xdp_locking_key back
above 0 since ixgbe_setup_tc is only called when transitioning between
XDP and non-XDP ring configurations, while ixgbe_xdp_locking_key is
incremented every time ixgbe_xdp_setup is called.
Also, ixgbe_setup_tc can be called via ethtool --set-channels, so this
becomes another path to decrement ixgbe_xdp_locking_key to 0 on systems
with more than 64 CPUs.
Since ixgbe_xdp_locking_key only protects the XDP_TX path and is tied
to the number of CPUs present, there is no reason to disable it upon
unloading an XDP program. To avoid confusion, I have moved enabling
ixgbe_xdp_locking_key into ixgbe_sw_init, which is part of the probe path.
Fixes: 4fe815850bdc ("ixgbe: let the xdpdrv work with more than 64 cpus")
Signed-off-by: John Hickey <jjh@daedalian.us>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230425170308.2522429-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aurabindo Pillai [Thu, 6 Apr 2023 19:59:45 +0000 (15:59 -0400)]
drm/amd/display: Update bounding box values for DCN321
[ Upstream commit
989cd3e76a4aab76fe7dd50090ac3fa501c537f6 ]
[Why&how]
Update bounding box values as per hardware spec
Fixes: 197485c69543 ("drm/amd/display: Create dcn321_fpu file")
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aurabindo Pillai [Thu, 6 Apr 2023 19:48:48 +0000 (15:48 -0400)]
drm/amd/display: Do not clear GPINT register when releasing DMUB from reset
[ Upstream commit
99d92eaca5d915763b240aae24669f5bf3227ecf ]
[Why & How]
There's no need to clear GPINT register for DMUB
when releasing it from reset. Fix that.
Fixes: ac2e555e0a7f ("drm/amd/display: Add DMCUB source files and changes for DCN32/321")
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cruise Hung [Fri, 13 May 2022 01:16:42 +0000 (09:16 +0800)]
drm/amd/display: Reset OUTBOX0 r/w pointer on DMUB reset
[ Upstream commit
425afa0ac99a05b39e6cd00704fa0e3e925cee2b ]
[Why & How]
We missed resetting OUTBOX0 mailbox r/w pointer on DMUB reset.
Fix it.
Fixes: 6ecf9773a503 ("drm/amd/display: Fix DMUB outbox trace in S4 (#4465)")
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aurabindo Pillai [Thu, 6 Apr 2023 16:28:59 +0000 (12:28 -0400)]
drm/amd/display: Fixes for dcn32_clk_mgr implementation
[ Upstream commit
d1c5c3e252b8a911a524e6ee33b82aca81397745 ]
[Why&How]
Fix CLK MGR early initialization and add logging.
Fixes: 265280b99822 ("drm/amd/display: add CLKMGR changes for DCN32/321")
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hersen Wu [Sun, 29 May 2022 14:54:30 +0000 (10:54 -0400)]
drm/amd/display: Return error code on DSC atomic check failure
[ Upstream commit
dd24662d9dfbad281bbf030f06d68c7938fa0c66 ]
[Why&How]
We were not returning -EINVAL on DSC atomic check fail. Add it.
Fixes: 71be4b16d39a ("drm/amd/display: dsc validate fail not pass to atomic check")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rodrigo Siqueira [Tue, 4 Apr 2023 20:54:05 +0000 (14:54 -0600)]
drm/amd/display: Add missing WA and MCLK validation
[ Upstream commit
822b84ecfc646da0f87fd947fa00dc3be5e45ecc ]
When the commit
fff7eb56b376 ("drm/amd/display: Don't set dram clock
change requirement for SubVP") was merged, we missed some parts
associated with the MCLK switch. This commit adds all the missing parts.
Fixes: fff7eb56b376 ("drm/amd/display: Don't set dram clock change requirement for SubVP")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rodrigo Siqueira [Thu, 20 Oct 2022 15:46:31 +0000 (11:46 -0400)]
drm/amd/display: Remove FPU guards from the DML folder
[ Upstream commit
bbfbf09d193ac831c40db50ef4b31d11548a9eef ]
As part of the programming expectation for using DML functions, DC
requires that any DML function invoked outside DML uses:
DC_FP_START();
... dml function ...
DC_FP_END();
Additionally, all the DML functions that can be invoked outside the DML
folder call the function dc_assert_fp_enabled(), which is responsible
for triggering a warning in the case that the DML function was not
guarded by the DC_FP_START/END. For this reason, call DC_FP_START/END
inside DML is wrong, and this commit removes all of those references.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
822b84ecfc64 ("drm/amd/display: Add missing WA and MCLK validation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zheng Wang [Thu, 13 Apr 2023 03:34:22 +0000 (11:34 +0800)]
scsi: qedi: Fix use after free bug in qedi_remove()
[ Upstream commit
c5749639f2d0a1f6cbe187d05f70c2e7c544d748 ]
In qedi_probe() we call __qedi_probe() which initializes
&qedi->recovery_work with qedi_recovery_handler() and
&qedi->board_disable_work with qedi_board_disable_work().
When qedi_schedule_recovery_handler() is called, schedule_delayed_work()
will finally start the work.
In qedi_remove(), which is called to remove the driver, the following
sequence may be observed:
Fix this by finishing the work before cleanup in qedi_remove().
CPU0 CPU1
|qedi_recovery_handler
qedi_remove |
__qedi_remove |
iscsi_host_free |
scsi_host_put |
//free shost |
|iscsi_host_for_each_session
|//use qedi->shost
Cancel recovery_work and board_disable_work in __qedi_remove().
Fixes: 4b1068f5d74b ("scsi: qedi: Add MFW error recovery process")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Link: https://lore.kernel.org/r/20230413033422.28003-1-zyytlz.wz@163.com
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Fri, 21 Apr 2023 18:37:14 +0000 (20:37 +0200)]
ASoC: Intel: soc-acpi-byt: Fix "WM510205" match no longer working
[ Upstream commit
c963e2ec095cb3f855890be53f56f5a6c6fbe371 ]
Commit
7e1d728a94ca ("ASoC: Intel: soc-acpi-byt: Add new WM5102 ACPI HID")
added an extra HID to wm5102_comp_ids.codecs, but it forgot to bump
wm5102_comp_ids.num_codecs, causing the last codec HID in the codecs list
to no longer work.
Bump wm5102_comp_ids.num_codecs to fix this.
Fixes: 7e1d728a94ca ("ASoC: Intel: soc-acpi-byt: Add new WM5102 ACPI HID")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230421183714.35186-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Christopherson [Mon, 8 May 2023 15:46:02 +0000 (17:46 +0200)]
KVM: x86/mmu: Refresh CR0.WP prior to checking for emulated permission faults
[ Upstream commit
cf9f4c0eb1699d306e348b1fd0225af7b2c282d3 ]
Refresh the MMU's snapshot of the vCPU's CR0.WP prior to checking for
permission faults when emulating a guest memory access and CR0.WP may be
guest owned. If the guest toggles only CR0.WP and triggers emulation of
a supervisor write, e.g. when KVM is emulating UMIP, KVM may consume a
stale CR0.WP, i.e. use stale protection bits metadata.
Note, KVM passes through CR0.WP if and only if EPT is enabled as CR0.WP
is part of the MMU role for legacy shadow paging, and SVM (NPT) doesn't
support per-bit interception controls for CR0. Don't bother checking for
EPT vs. NPT as the "old == new" check will always be true under NPT, i.e.
the only cost is the read of vcpu->arch.cr4 (SVM unconditionally grabs CR0
from the VMCB on VM-Exit).
Reported-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lkml.kernel.org/r/677169b4-051f-fcae-756b-9a3e1bb9f8fe%40grsecurity.net
Fixes: fb509f76acc8 ("KVM: VMX: Make CR0.WP a guest owned bit")
Tested-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20230405002608.418442-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net> # backport to v6.1.x
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mathias Krause [Mon, 8 May 2023 15:46:01 +0000 (17:46 +0200)]
KVM: VMX: Make CR0.WP a guest owned bit
[ Upstream commit
fb509f76acc8d42bed11bca308404f81c2be856a ]
Guests like grsecurity that make heavy use of CR0.WP to implement kernel
level W^X will suffer from the implied VMEXITs.
With EPT there is no need to intercept a guest change of CR0.WP, so
simply make it a guest owned bit if we can do so.
This implies that a read of a guest's CR0.WP bit might need a VMREAD.
However, the only potentially affected user seems to be kvm_init_mmu()
which is a heavy operation to begin with. But also most callers already
cache the full value of CR0 anyway, so no additional VMREAD is needed.
The only exception is nested_vmx_load_cr3().
This change is VMX-specific, as SVM has no such fine grained control
register intercept control.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20230322013731.102955-7-minipli@grsecurity.net
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net> # backport to v6.1.x
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mathias Krause [Mon, 8 May 2023 15:46:00 +0000 (17:46 +0200)]
KVM: x86: Make use of kvm_read_cr*_bits() when testing bits
[ Upstream commit
74cdc836919bf34684ef66f995273f35e2189daf ]
Make use of the kvm_read_cr{0,4}_bits() helper functions when we only
want to know the state of certain bits instead of the whole register.
This not only makes the intent cleaner, it also avoids a potential
VMREAD in case the tested bits aren't guest owned.
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20230322013731.102955-5-minipli@grsecurity.net
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mathias Krause [Mon, 8 May 2023 15:45:59 +0000 (17:45 +0200)]
KVM: x86: Do not unload MMU roots when only toggling CR0.WP with TDP enabled
[ Upstream commit
01b31714bd90be2784f7145bf93b7f78f3d081e1 ]
There is no need to unload the MMU roots with TDP enabled when only
CR0.WP has changed -- the paging structures are still valid, only the
permission bitmap needs to be updated.
One heavy user of toggling CR0.WP is grsecurity's KERNEXEC feature to
implement kernel W^X.
The optimization brings a huge performance gain for this case as the
following micro-benchmark running 'ssdd 10 50000' from rt-tests[1] on a
grsecurity L1 VM shows (runtime in seconds, lower is better):
legacy TDP shadow
kvm-x86/next@d8708b 8.43s 9.45s 70.3s
+patch 5.39s 5.63s 70.2s
For legacy MMU this is ~36% faster, for TDP MMU even ~40% faster. Also
TDP and legacy MMU now both have a similar runtime which vanishes the
need to disable TDP MMU for grsecurity.
Shadow MMU sees no measurable difference and is still slow, as expected.
[1] https://git.kernel.org/pub/scm/utils/rt-tests/rt-tests.git
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20230322013731.102955-3-minipli@grsecurity.net
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paolo Bonzini [Mon, 8 May 2023 15:45:58 +0000 (17:45 +0200)]
KVM: x86/mmu: Avoid indirect call for get_cr3
[ Upstream commit
2fdcc1b324189b5fb20655baebd40cd82e2bdf0c ]
Most of the time, calls to get_guest_pgd result in calling
kvm_read_cr3 (the exception is only nested TDP). Hardcode
the default instead of using the get_cr3 function, avoiding
a retpoline if they are enabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20230322013731.102955-2-minipli@grsecurity.net
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net> # backport to v6.1.x
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ryan Lin [Tue, 9 May 2023 16:01:20 +0000 (11:01 -0500)]
drm/amd/display: Ext displays with dock can't recognized after resume
[ Upstream commit
1e5d4d8eb8c0f15d90c50e7abd686c980e54e42e ]
[Why]
Needs to set the default value of the LTTPR timeout after resume.
[How]
Set the default (3.2ms) timeout at resuming if the sink supports
LTTPR
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ZhangPeng [Fri, 25 Nov 2022 10:21:59 +0000 (10:21 +0000)]
fs/ntfs3: Fix null-ptr-deref on inode->i_op in ntfs_lookup()
[ Upstream commit
254e69f284d7270e0abdc023ee53b71401c3ba0c ]
Syzbot reported a null-ptr-deref bug:
ntfs3: loop0: Different NTFS' sector size (1024) and media sector size
(512)
ntfs3: loop0: Mark volume as dirty due to NTFS errors
general protection fault, probably for non-canonical address
0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:d_flags_for_inode fs/dcache.c:1980 [inline]
RIP: 0010:__d_add+0x5ce/0x800 fs/dcache.c:2796
Call Trace:
<TASK>
d_splice_alias+0x122/0x3b0 fs/dcache.c:3191
lookup_open fs/namei.c:3391 [inline]
open_last_lookups fs/namei.c:3481 [inline]
path_openat+0x10e6/0x2df0 fs/namei.c:3688
do_filp_open+0x264/0x4f0 fs/namei.c:3718
do_sys_openat2+0x124/0x4e0 fs/open.c:1310
do_sys_open fs/open.c:1326 [inline]
__do_sys_open fs/open.c:1334 [inline]
__se_sys_open fs/open.c:1330 [inline]
__x64_sys_open+0x221/0x270 fs/open.c:1330
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
If the MFT record of ntfs inode is not a base record, inode->i_op can be
NULL. And a null-ptr-deref may happen:
ntfs_lookup()
dir_search_u() # inode->i_op is set to NULL
d_splice_alias()
__d_add()
d_flags_for_inode() # inode->i_op->get_link null-ptr-deref
Fix this by adding a Check on inode->i_op before calling the
d_splice_alias() function.
Fixes: 4342306f0f0d ("fs/ntfs3: Add file operations and implementation")
Reported-by: syzbot+a8f26a403c169b7593fe@syzkaller.appspotmail.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takahiro Kuwano [Thu, 6 Apr 2023 06:17:45 +0000 (15:17 +0900)]
mtd: spi-nor: spansion: Enable JFFS2 write buffer for Infineon s25hx SEMPER flash
[ Upstream commit
4199c1719e24e73be0acc8b0146fc31ad8af9771 ]
Infineon(Cypress) SEMPER NOR flash family has on-die ECC and its program
granularity is 16-byte ECC data unit size. JFFS2 supports write buffer
mode for ECC'd NOR flash. Provide a way to clear the MTD_BIT_WRITEABLE
flag in order to enable JFFS2 write buffer mode support.
Fixes: b6b23833fc42 ("mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups")
Suggested-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/a1cc128e094db4ec141f85bd380127598dfef17e.1680760742.git.Takahiro.Kuwano@infineon.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tanmay Shah [Sat, 11 Mar 2023 01:24:04 +0000 (17:24 -0800)]
mailbox: zynqmp: Fix counts of child nodes
[ Upstream commit
f72f805e72882c361e2a612c64a6e549f3da7152 ]
If child mailbox node status is disabled it causes
crash in interrupt handler. Fix this by assigning
only available child node during driver probe.
Fixes: 4981b82ba2ff ("mailbox: ZynqMP IPI mailbox controller")
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230311012407.1292118-2-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sun, 20 Nov 2022 08:25:54 +0000 (09:25 +0100)]
mailbox: zynq: Switch to flexible array to simplify code
[ Upstream commit
043f85ce81cb1714e14d31c322c5646513dde3fb ]
Using flexible array is more straight forward. It
- saves 1 pointer in the 'zynqmp_ipi_pdata' structure
- saves an indirection when using this array
- saves some LoC and avoids some always spurious pointer arithmetic
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Stable-dep-of:
f72f805e7288 ("mailbox: zynqmp: Fix counts of child nodes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manivannan Sadhasivam [Tue, 14 Mar 2023 08:04:43 +0000 (13:34 +0530)]
soc: qcom: llcc: Do not create EDAC platform device on SDM845
[ Upstream commit
cca94f1dd6d0a4c7e5c8190672f5747e3c00ddde ]
The platforms based on SDM845 SoC locks the access to EDAC registers in the
bootloader. So probing the EDAC driver will result in a crash. Hence,
disable the creation of EDAC platform device on all SDM845 devices.
The issue has been observed on Lenovo Yoga C630 and DB845c.
While at it, also sort the members of `struct qcom_llcc_config` to avoid
any holes in-between.
Cc: <stable@vger.kernel.org> # 5.10
Reported-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-15-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manivannan Sadhasivam [Tue, 14 Mar 2023 08:04:42 +0000 (13:34 +0530)]
qcom: llcc/edac: Support polling mode for ECC handling
[ Upstream commit
721d3e91bfc93975c5e1a76c7d588dd8df5d82da ]
Not all Qcom platforms support IRQ mode for ECC handling. For those
platforms, the current EDAC driver will not be probed due to missing ECC
IRQ in devicetree.
So add support for polling mode so that the EDAC driver can be used on all
Qcom platforms supporting LLCC.
The polling delay of 5000ms is chosen based on Qcom downstream/vendor
driver.
Reported-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-14-manivannan.sadhasivam@linaro.org
Stable-dep-of:
cca94f1dd6d0 ("soc: qcom: llcc: Do not create EDAC platform device on SDM845")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takahiro Kuwano [Thu, 6 Apr 2023 06:17:44 +0000 (15:17 +0900)]
mtd: spi-nor: spansion: Enable JFFS2 write buffer for Infineon s28hx SEMPER flash
[ Upstream commit
9fd0945fe6fadfb6b54a9cd73be101c02b3e8134 ]
Infineon(Cypress) SEMPER NOR flash family has on-die ECC and its program
granularity is 16-byte ECC data unit size. JFFS2 supports write buffer
mode for ECC'd NOR flash. Provide a way to clear the MTD_BIT_WRITEABLE
flag in order to enable JFFS2 write buffer mode support.
A new SNOR_F_ECC flag is introduced to determine if the part has on-die
ECC and if it has, MTD_BIT_WRITEABLE is unset.
In vendor specific driver, a common cypress_nor_ecc_init() helper is
added. This helper takes care for ECC related initialization for SEMPER
flash family by setting up params->writesize and SNOR_F_ECC.
Fixes: c3266af101f2 ("mtd: spi-nor: spansion: add support for Cypress Semper flash")
Suggested-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/d586723f6f12aaff44fbcd7b51e674b47ed554ed.1680760742.git.Takahiro.Kuwano@infineon.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miquel Raynal [Tue, 28 Mar 2023 15:41:03 +0000 (17:41 +0200)]
mtd: spi-nor: Add a RWW flag
[ Upstream commit
4eddee70140b3ae183398b246a609756546c51f1 ]
Introduce a new (no SFDP) flag for the feature that we are about to
support: Read While Write. This means, if the chip has several banks and
supports RWW, once a page of data to write has been transferred into the
chip's internal SRAM, another read operation happening on a different
bank can be performed during the tPROG delay.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230328154105.448540-7-miquel.raynal@bootlin.com
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Stable-dep-of:
9fd0945fe6fa ("mtd: spi-nor: spansion: Enable JFFS2 write buffer for Infineon s28hx SEMPER flash")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sudip Mukherjee [Tue, 20 Sep 2022 18:48:08 +0000 (19:48 +0100)]
mtd: spi-nor: add SFDP fixups for Quad Page Program
[ Upstream commit
1799cd8540b67b88514c82f5fae1c75b986bcbd8 ]
SFDP table of some flash chips do not advertise support of Quad Input
Page Program even though it has support. Use flags and add hardware
cap for these chips.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@sifive.com>
[tudor.ambarus@microchip.com: move pp setting in spi_nor_init_default_params]
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20220920184808.44876-2-sudip.mukherjee@sifive.com
Stable-dep-of:
9fd0945fe6fa ("mtd: spi-nor: spansion: Enable JFFS2 write buffer for Infineon s28hx SEMPER flash")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takahiro Kuwano [Wed, 31 Aug 2022 04:59:04 +0000 (13:59 +0900)]
mtd: spi-nor: spansion: Remove NO_SFDP_FLAGS from s28hs512t info
[ Upstream commit
db391efe765cc6cfc0ffc8d8ef146dc8e6816a7e ]
Read, Page Program, and Sector Erase settings are done in SFDP so we can
remove NO_SFDP_FLAGS from s28hs512t info. Since the default_init() is no
longer called after removing NO_SFDP_FLAGS, the initialization in the
default_init() is moved to late_init().
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/12e468992f5d0cbd474abff3203100cc8163d4e5.1661915569.git.Takahiro.Kuwano@infineon.com
Stable-dep-of:
9fd0945fe6fa ("mtd: spi-nor: spansion: Enable JFFS2 write buffer for Infineon s28hx SEMPER flash")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Christopherson [Sat, 28 Jan 2023 00:14:27 +0000 (00:14 +0000)]
KVM: x86/pmu: Disallow legacy LBRs if architectural LBRs are available
[ Upstream commit
098f4c061ea10b777033b71c10bd9fd706820ee9 ]
Disallow enabling LBR support if the CPU supports architectural LBRs.
Traditional LBR support is absent on CPU models that have architectural
LBRs, and KVM doesn't yet support arch LBRs, i.e. KVM will pass through
non-existent MSRs if userspace enables LBRs for the guest.
Cc: stable@vger.kernel.org
Cc: Yang Weijiang <weijiang.yang@intel.com>
Cc: Like Xu <like.xu.linux@gmail.com>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes: be635e34c284 ("KVM: vmx/pmu: Expose LBR_FMT in the MSR_IA32_PERF_CAPABILITIES")
Tested-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20230128001427.2548858-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Christopherson [Thu, 6 Oct 2022 00:03:11 +0000 (00:03 +0000)]
KVM: x86: Track supported PERF_CAPABILITIES in kvm_caps
[ Upstream commit
bec46859fb9d797a21c983100b1f425bebe89747 ]
Track KVM's supported PERF_CAPABILITIES in kvm_caps instead of computing
the supported capabilities on the fly every time. Using kvm_caps will
also allow for future cleanups as the kvm_caps values can be used
directly in common x86 code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Like Xu <likexu@tencent.com>
Message-Id: <
20221006000314.73240-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stable-dep-of:
098f4c061ea1 ("KVM: x86/pmu: Disallow legacy LBRs if architectural LBRs are available")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Christopherson [Thu, 6 Oct 2022 00:03:07 +0000 (00:03 +0000)]
perf/x86/core: Zero @lbr instead of returning -1 in x86_perf_get_lbr() stub
[ Upstream commit
0b9ca98b722969660ad98b39f766a561ccb39f5f ]
Drop the return value from x86_perf_get_lbr() and have the stub zero out
the @lbr structure instead of returning -1 to indicate "no LBR support".
KVM doesn't actually check the return value, and instead subtly relies on
zeroing the number of LBRs in intel_pmu_init().
Formalize "nr=0 means unsupported" so that KVM doesn't need to add a
pointless check on the return value to fix KVM's benign bug.
Note, the stub is necessary even though KVM x86 selects PERF_EVENTS and
the caller exists only when CONFIG_KVM_INTEL=y. Despite the name,
KVM_INTEL doesn't strictly require CPU_SUP_INTEL, it can be built with
any of INTEL || CENTAUR || ZHAOXIN CPUs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20221006000314.73240-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stable-dep-of:
098f4c061ea1 ("KVM: x86/pmu: Disallow legacy LBRs if architectural LBRs are available")
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-starfive.git / log