staging: rtl8188eu: fix spelling mistake in comment

Fix a spelling mistake reported by checkpatch.
Caculate -> Calculate

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove braces from single if statement

Remove braces from single line if statement.
Reported by checkpatch.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove unnecessary parentheses in odm_rtl8188e.c

Remove unnecessary parentheses in odm_rtl8188e.c.
Reported by checkpatch.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: add spaces around '+' in fw.c

Add spaces around '+' in fw.c to follow kernel coding style.
Reported by checkpatch.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: simplify block comment in pwrseq.c

Simplify block comment to a single line to clear a checkpatch warning.
WARNING: Block comments use * on subsequent lines

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: correct block comment in bb_cfg.c

Correct block comment to clear a checkpatch warning.
WARNING: Block comments should align the * on each line

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rename odm_SignalScaleMapping()

Rename odm_SignalScaleMapping to avoid CamelCase.
odm_SignalScaleMapping -> odm_signal_scale_mapping

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rename variable in odm_SignalScaleMapping()

Rename variable in odm_SignalScaleMapping() to avoid CamelCase.
RetSig -> retsig

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rename parameter of odm_SignalScaleMapping()

Rename parameter of odm_SignalScaleMapping() to avoid CamelCase.
CurrSig -> currsig

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rename odm_EVMdbToPercentage()

Rename odm_EVMdbToPercentage() to avoid CamelCase.
odm_EVMdbToPercentage -> odm_evm_db_to_percentage

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rename parameter of odm_EVMdbToPercentage()

Rename parameter of odm_EVMdbToPercentage() to avoid CamelCase.
Value -> value

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rename odm_QueryRxPwrPercentage()

Rename odm_QueryRxPwrPercentage() to avoid CamelCase.
odm_QueryRxPwrPercentage -> odm_query_rxpwrpercentage

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rename parameter of odm_QueryRxPwrPercentage()

Rename parameter of odm_QueryRxPwrPercentage() to avoid CamelCase.
AntPower -> antpower

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: replace tabs with spaces in odm_hwconfig.c

Replace tabs with spaces in odm_hwconfig.c where appropriate.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: add spaces around '*' in odm_hwconfig.c

Add spaces around '*' in odm_hwconfig.c to follow kernel coding style.
Reported by checkpatch.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: add spaces around '+' in odm_hwconfig.c

Add spaces around '+' in odm_hwconfig.c to follow kernel coding style.
Reported by checkpatch.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove wrapper odm_SignalScaleMapping()

The function odm_SignalScaleMapping() is just a wrapper for
odm_SignalScaleMapping_92CSeries().

Rename odm_SignalScaleMapping_92CSeries() to odm_SignalScaleMapping()
and remove the wrapper.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rename odm_HWConfig

Rename source and header file to avoid CamelCase.
odm_HWConfig.c -> odm_hwconfig.c
odm_HWConfig.h -> odm_hwconfig.h

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: cleanup inconsistent indenting

Cleanup all inconsistent indenting reported by smatch.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ks7010: Remove unnecessary null check

Remove the unnecessary socket buffer null check in hostif_data_request.
There is already an appropriate null check in the calling function:

(ks_wlan_net.c) ks_wlan_start_xmit

Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Remove extra space character

Remove an extra space in ddk750_mode.c to fix indentation

Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtlwifi: Removed unused define and code efuse_re_pg* from wifi.h

The following:
 bool efuse_re_pg_sec1flag;
 u8 efuse_re_pg_data[8];
are not referenced anywhere in the rtlwifi code.

Signed-off-by: Rick Veens <rickveens92@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: axis-fifo: add error handling of class_create()

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: usb: add release function for DCI device

This patch adds the missing release function for the DCI device that frees
the container structure it is embedded in.

Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MAINTAINERS: removed staging/ft1000 driver

Delete the ft1000 MAINTAINERS entry, concluding the
earlier removal of the driver in commit 6512edec48b2
("staging: ft1000: remove obsolete driver").

Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtlwifi: Return -ENOMEM instead of -1

Use the ENOMEM constant instead of -1 for kzalloc failure checks in
rtl_halmac.c

Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mt7621-mmc: Remove unused single statement macros

This patch removes unused single statement macros in sd.c

Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mt7621-mmc: Remove single statement macro msdc_irq_restore()

This patch removes the macro msdc_irq_restore() and replaces its
usage with call to the function called in the macro definition.
Issue found by checkpatch.

Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: delete the driver

Digi does not support it, no one has hardware for it, and no one is
working on it, so let's drop it for now.  If anyone wants to pick it
back up, then can revert this patch.

Reported-by: Lidza Louina <lidza.louina@gmail.com>
Reported-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: Fix Kconfig help header and text

Replace Kconfig help header and text to match other modules. Issue found
by checkpatch.

Spacing adjusted to match Documentation/process/coding-style.rst. Issue
reported by rdunlap@infradead.org.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sehro Rautenkranz <sehro@sehro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: clean up clang warning on extraneous parentheses

There are extraneous parantheses that are causing clang to produce a
warning so remove these.

Clean up 3 clang warnings:
equality comparison with extraneous parentheses [-Wparentheses-equality]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Remove unnecessary parentheses

Remove unnecessary parentheses between 'address-of' operators
and struct members.
Issues found with checkpatch.pl

Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: Mark ACPI table declaration as used

Clang emits the following warning:

drivers/staging/rtl8723bs/os_dep/sdio_intf.c:25:36: warning: variable
'acpi_ids' is not needed and will not be emitted
[-Wunneeded-internal-declaration]
static const struct acpi_device_id acpi_ids[] = {
                                   ^
1 warning generated.

Mark acpi_ids with the attribute __used, which makes it clear to Clang
that we don't want this warning while not inhibiting Clang's dead code
elimination from removing the unreferenced internal symbol when moving
the data to the globally available symbol with MODULE_DEVICE_TABLE.

$ nm -S drivers/staging/rtl8723bs/os_dep/sdio_intf.o | grep acpi
0000000000000000 0000000000000040 R __mod_acpi__acpi_ids_device_table

Link: https://github.com/ClangBuiltLinux/linux/issues/169
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mt7621-mmc: replace `printk` with preferred API

Replace calls to `printk` with `dev_info` and `pr_err`
Issues found with checkpatch.pl

Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mt7621-mmc: Fix comparison to NULL

Replace comparisons of a variable 'x' to NULL with
either 'x' or '!x'.
Issues found with checkpatch.pl

Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: mt7621-mmc: remove unnecessary braces from 'if' statements

Remove unnecessary braces from one line 'if' statements.
Issues found with checkpatch.pl

Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-4.20b' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of IIO new device support features and cleanup for the 4.20 cycle.

One merge commit in here to bring in the SPI_CS_WORD flag patches
that are also going via the SPI tree.

There are a few more fixes than normal for a pull targetting the
next merge window.  These are all long term issues and as we are late
in the cycle, they can wait.

New device support
* ad7606
  - Add support fo the ad7605-4 driver.  This driver is still in staging
    but is heading in the right direction to graduate, motivated partly
    by the requirement for this device support.
* ST VL53L0X ToF ranging sensor
  - New minimal driver. Interrupt support to follow.

New features

* SPI_CS_WORD optimization allows long transfers with the chip select
  toggled every 16bits.   There is a software fallback as well to let
  drivers not care about whether the hardware supports it.

* bh1750
  - Device tree support and bindings.
* ti-ads7950
  - Use the SPI_CS_WORD optmization to save lots of cpu cycles (assuming
    the hardware supports it)

Fixes and cleanups

* ad5064
  - Fix some long incorrect regulator error handling that preventing
    enabling the internal regulator.
* ad7606
  - The ad7606 doesn't actually have a 2.5V range and the values provided
    for scale have always been wrong.  Fix them.
  - Drop some wrong kernel-doc (things that don't exist)
  - Add missing kernel-doc
* at91-adc
  - Fixing missing ack of dataready on sysfs channel reads to avoid spurious
    interrupts.
  - Fix a wrong channel numbers in triggered_buffer_mode
* hmc5843
  - Fix incorrect part number in a comment.
* imx25-gcq
  - Fix a device_node leak in an error path.
* meson-saradc
  - Drop an unused and pointless define.
  - Use of_device_get_match_data instead of opencoding
  - Tidy up how meson_sar_adc_param is accessed.
  - Rework prior to adding some temperature sensor support.

* tag 'iio-for-4.20b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: ad5064: Fix regulator handling
  iio: adc: meson-saradc: use the address attribute from iio_chan_spec
  iio: adc: meson-saradc: do not use meson_sar_adc_iio_channels directly
  iio: adc: at91: fix wrong channel number in triggered buffer mode
  iio: adc: at91: fix acking DRDY irq on simple conversions
  iio: adc: meson-saradc: simplify access to meson_sar_adc_param
  iio: adc: meson-saradc: use of_device_get_match_data
  iio: adc: meson-saradc: remove #define MESON_SAR_ADC_DELTA_10_TS_C_SHIFT
  iio: light: bh1750: Add device tree support
  dt-bindings: iio: light: bh1750: Add device tree binding documentation
  staging:iio:ad7606: Add support for the ad7605-4
  iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor.
  staging:iio:ad7606: update structs with doc annotations
  iio: magnetometer: hmc5843: Fixed a comment error.
  iio: adc: imx25-gcq: Fix leak of device_node in mx25_gcq_setup_cfgs()
  iio: adc: ti-ads7950: use SPI_CS_WORD to reduce CPU usage
  spi: add software implementation for SPI_CS_WORD
  spi: add new SPI_CS_WORD flag
  staging:iio:ad7606: Remove incorrect kernel doc annotations
  staging:iio:ad7606: fix voltage scales

staging: vboxvideo: Use more drm_fb_helper functions

Store fbhelper and afb struct directly in vbox_private and use
drm_fb_helper_fbdev_setup to replace vbox_fbdev_init, note we cannot use
drm_fb_helper_fbdev_teardown since we use a private framebuffer for the
fbdev.

And replace vbox_driver_lastclose with drm_fb_helper_lastclose.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vboxvideo: Drop unnecessary drm_connector_helper_funcs callbacks

vbox_mode_valid always returns MODE_OK, which is also the default if no
mode_valid callback is defined.

vbox_best_single_encoder chains to drm_encoder_find, the drm-core will
call drm_encoder_find itself if there is no best_encoder call back.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vboxvideo: Call drm_atomic_helper_check_plane_state from atomic_check

Extend our planes atomic_check callbacks to be more thorough by calling
the drm_atomic_helper_check_plane_state helper.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vboxvideo: Replace crtc_helper enable/disable functions

Replace vbox_crtc_commit and vbox_crtc_disable with
vbox_crtc_atomic_[en|dis]able which are the preferred callbacks for
these for atomic drivers.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vboxvideo: Fix DPMS support after atomic conversion

Atomic modesetting does not use the traditional dpms call backs, instead
we should check crtc_state->active.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vboxvideo: Restore page-flip support

Restore page-flip support now that the atomic conversion is complete.

Since the mode parameter to vbox_crtc_set_base_and_mode() now never
is NULL call drm_atomic_crtc_needs_modeset() to check if we need to
check for input-mapping changes, to avoid doing unnecesarry work on
a flip. And hookup the drm_atomic_helper_page_flip helper to implement
the page_flip callback.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vboxvideo: Atomic phase 3: Switch last bits over to atomic

Now that the state objects are wired up, we can:

1) Move to the final atomic handlers
2) Wire up atomic set_config helper
3) Switch to drm_mode_config_helper_suspend/resume for suspend/resume
4) Enable atomic modesetting ioctl

This is all done in one commit because doing this piecemeal leads to
an intermediate state which triggers WARN_ONs in the atomic code because
e.g. plane->fb is still being set.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vboxvideo: Atomic phase 2: Stop using plane->fb and crtc->*

Once we are fully atomic plane->fb will always be NULL and we also
should not access things like crtc->enabled and crt->[hw]mode.

Now that we've wired up the state object handlers, we always have a
plane_state and crtc_state so change the code referencing plane->fb and
crtc->* to use the data from the plane_state and crt_state instead.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vboxvideo: Atomic phase 2: Wire up state object handlers

Wire up state object handlers for the crtc-s and the planes, call
drm_mode_config_reset() after creating all the crtc-s and encoders and
remove the legacy drm_helper_disable_unused_functions() call.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vboxvideo: Atomic phase 1: Use drm_plane_helpers for primary plane

Use drm_plane_helpers for the primary plane and replace our custom
mode_set callback with drm_helper_crtc_mode_set.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vboxvideo: Atomic phase 1: convert cursor to universal plane

In preparation for atomic conversion, let's use the transitional atomic
helpers drm_plane_helper_update/disable.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vboxvideo: Cache mode width, height and crtc panning in vbox_crtc

When setting a mode we not only pass the mode to the hypervisor,
but also information on how to map / translate input coordinates
for the emulated USB tablet.  This input-mapping may change when
the mode on *another* crtc changes.

This means that sometimes we must do a modeset on other crtc-s then
the one being changed to update the input-mapping. Including crtc-s
which may be disabled inside the guest (shown as a black window
on the host unless closed by the user).

With atomic modesetting the mode-info of disabled crtcs gets zeroed
yet we need it when updating the input-map to avoid resizing the
window as a side effect of a mode_set on another crtc.

This commit adds caching of the mode info into out private vbox_crtc
struct so that we always have the info at hand when we need it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vboxvideo: Temporarily remove page_flip support

drm_mode_page_flip_ioctl() cannot deal with the in between phase of
the transitioning to atomic modeset support. Once we start using
drm_helper_crtc_mode_set(), we start setting plane->state on the primary
plane. But we are not fully atomic yet so then set both plane-state->fb
and plane->fb.

If both plane-state->fb and plane->fb are set drm_mode_page_flip_ioctl()
gets confused and stops calling drm_framebuffer_get() on the new fb while
still calling drm_framebuffer_put() on the old fb.

The current page_flip implementation expects drm_mode_page_flip_ioctl()
to take care of both and once we switch to drm_atomic_helper_page_flip()
that will expect neither to be done, taking care of both itself.

So for the transition we need to remove page_flip support and then after
the transition is complete and we set DRIVER_ATOMIC in our driver_features,
we can start using drm_atomic_helper_page_flip().

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vboxvideo: Remove empty encoder_helper_funcs

All the encoder_helper_funcs are optional, and even setting the
drm_encoder_helper_funcs vtable itself is optional and may be left out
when not using any of the helper funcs, so lets drop all of this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vboxvideo: Cleanup vbox_set_up_input_mapping()

This cleanups 2 things:

1) The first time we loop over the crtc-s, to compare framebuffers, fb1 may
get set to NULL by the fb1 = CRTC_FB(crtci); statement and then we call
to_vbox_framebuffer() on it. The result of this call is only used for
an address comparison, so we don't end up dereferencing the bad pointer,
but still it is better to not do this.

2) Since we already figure out the first crtc with a fb in the first loop
and store that in fb1, there is no need to loop over the crtc-s again just
to find the first crtc with a fb again.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: ad5064: Fix regulator handling

The correct way to handle errors returned by regualtor_get() and friends is
to propagate the error since that means that an regulator was specified,
but something went wrong when requesting it.

For handling optional regulators, e.g. when the device has an internal
vref, regulator_get_optional() should be used to avoid getting the dummy
regulator that the regulator core otherwise provides.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: meson-saradc: use the address attribute from iio_chan_spec

Until now the "channel" number is identical to how the channel is
identified inside the (FIFO) registers. In our case we have eight
channels and the hardware also has eight inputs.

However, there are two special inputs:
- channel 6 can select between the SAR_ADC_CH6 pad and the chip's
  internal temperature sensor
- channel 7 can select between SAR_ADC_CH7 and VSS, VDD / 4, VDD / 2,
  VDD * 3 / 4 and VDD.

When programming the registers to read for example the temperature
sensor we have to select FIFO channel 6, set the correct bit which muxes
channel 6 to the temperature sensor and then start the ADC measurement
for channel 6 as usual.

When we add support for the temperature sensor the driver has to know
about that it has to use FIFO channel 6 to measure using the chip's
internal temperature sensor. However, in that case the iio_chan_spec
channel will not be 6 because this is already used for the SAR_ADC_CH6
pad input. Thus we use iio_chan_spec's address field to store the FIFO
channel number for each channel.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: meson-saradc: do not use meson_sar_adc_iio_channels directly

In the future we may support two different channel sets:
- one which includes the voltage pads and the temperature sensor output
  (for Meson8, Meson8b and Meson8m2)
- one which only includes the voltage pads (GXBB, GXL, GXM and AXG)

Channel 7 has a special function on all of these platforms. However,
since we will have different channel array definitions we want our code
to always use whatever channels struct iio_dev uses.

No functional changes for now. This is the preparation for adding
temperature sensor support to this driver.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: at91: fix wrong channel number in triggered buffer mode

When channels are registered, the hardware channel number is not the
actual iio channel number.
This is because the driver is probed with a certain number of accessible
channels. Some pins are routed and some not, depending on the description of
the board in the DT.
Because of that, channels 0,1,2,3 can correspond to hardware channels
2,3,4,5 for example.
In the buffered triggered case, we need to do the translation accordingly.
Fixed the channel number to stop reading the wrong channel.

Fixes: 0e589d5fb ("ARM: AT91: IIO: Add AT91 ADC driver.")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: at91: fix acking DRDY irq on simple conversions

When doing simple conversions, the driver did not acknowledge the DRDY irq.
If this irq status is not acked, it will be left pending, and as soon as a
trigger is enabled, the irq handler will be called, it doesn't know why
this status has occurred because no channel is pending, and then it will go
int a irq loop and board will hang.
To avoid this situation, read the LCDR after a raw conversion is done.

Fixes: 0e589d5fb ("ARM: AT91: IIO: Add AT91 ADC driver.")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: meson-saradc: simplify access to meson_sar_adc_param

Commit 053ffe3c8cfe31 ("iio: adc: meson-saradc: squash and share the
common adc platform data") put all the data which is needed at runtime
from struct meson_sar_adc_data to a new struct meson_sar_adc_param so
we can re-use the platform specific configuration without having to
duplicate everything just to change the name.

The only place where struct meson_sar_adc_data is now needed is the
_probe function which has to pass the name to the iio_dev. All other
functions only need access to struct meson_sar_adc_param. This means we
can simplify struct meson_sar_adc_priv.

The goal of this patch is to make the code a bit easier to read since
this removes one level of nesting. No functional changes intended.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: meson-saradc: use of_device_get_match_data

This simplifies our _probe function by using of_device_get_match_data
instead of open-coding it. No functional changes.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: meson-saradc: remove #define MESON_SAR_ADC_DELTA_10_TS_C_SHIFT

This define is of no use because the driver is avoiding shifting bits
by itself but using FIELD_GET/FIELD_PREP (which are using bit masks)
instead. There is already a MESON_SAR_ADC_DELTA_10_TS_C_MASK bit mask so
MESON_SAR_ADC_DELTA_10_TS_C_SHIFT was redundant.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: light: bh1750: Add device tree support

Add device tree support for ROHM BH1750 series ambient light sensors.

Signed-off-by: ryang <decatf@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: light: bh1750: Add device tree binding documentation

Document device tree bindings for ROHM BH1750 ambient light sensor driver.

Signed-off-by: ryang <decatf@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

staging: wlan-ng: remove "autogenerated code" comments

p80211metadef.h and p80211metastruct.h both have comments stating they
are autogenerated and should not be edited. However, neither is
generated during build and both have had numerous manual edits since
the driver has been in staging.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rejoin split lines shortened by case changes

The reformatting of case blocks has shortened some lines such that
previously split lines can be rejoined without exceeding 80
characters. Rejoined those lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: make switch case block format consistent

For switch statements with case blocks make the format consistent by
applying K&R formatting, a space before the opening brace, single
indentation of contained code, break inside the block and closing
brace aligned with case.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: formatting cleanup in cfg80211.c

Combine previously split lines for an assignment; now fits in 80
characters as the name of the macro being assigned was shortened.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_p2_p2MAC_p2CurrentTxRate in p80211metadef.h

Rename DIDmib_p2_p2MAC_p2CurrentTxRate in p80211metadef.h to
DIDMIB_P2_MAC_CURRENTTXRATE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines. Also shorten
name by removing repeated use of "P2" to ease readability and reduce
long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_p2_p2MAC in p80211metadef.h

Rename DIDmib_p2_p2MAC in p80211metadef.h to DIDMIB_P2_MAC to fix
"Avoid CamelCase" message from checkpatch and conform to the coding
style guidelines. Also shorten name by removing repeated use of "P2"
to ease readability and reduce long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_p2_p2NIC_p2PRISupRange in p80211metadef.h

Rename DIDmib_p2_p2NIC_p2PRISupRange in p80211metadef.h to
DIDMIB_P2_NIC_PRISUPRANGE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines. Also shorten
name by removing repeated use of "P2" to ease readability and reduce
long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_p2_p2Static_p2CnfPortType in p80211metadef.h

Rename DIDmib_p2_p2Static_p2CnfPortType in p80211metadef.h to
DIDMIB_P2_STATIC_CNFPORTTYPE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines. Also shorten
name by removing repeated use of "P2" to ease readability and reduce
long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_p2_p2Static in p80211metadef.h

Rename DIDmib_p2_p2Static in p80211metadef.h to DIDMIB_P2_STATIC to
fix "Avoid CamelCase" message from checkpatch and conform to the
coding style guidelines. Also shorten name by removing repeated use of
"P2" to ease readability and reduce long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_cat_p2 in p80211metadef.h

Rename DIDmib_cat_p2 in p80211metadef.h to DIDMIB_CAT_P2 to fix "Avoid
CamelCase" message from checkpatch and conform to the coding style
guidelines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_lnx_lnxConfigTable_lnxRSNAIE in p80211metadef.h

Rename DIDmib_lnx_lnxConfigTable_lnxRSNAIE in p80211metadef.h to
DIDMIB_LNX_CONFIGTABLE_RSNAIE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines. Also shorten
name by removing repeated use of "LNX" to ease readability and reduce
long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_lnx_lnxConfigTable in p80211metadef.h

Rename DIDmib_lnx_lnxConfigTable in p80211metadef.h to
DIDMIB_LNX_CONFIGTABLE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines. Also shorten
name by removing repeated use of "LNX" to ease readability and
reduce long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_cat_lnx in p80211metadef.h

Rename DIDmib_cat_lnx in p80211metadef.h to DIDMIB_CAT_LNX to fix
"Avoid CamelCase" message from checkpatch and conform to the coding
style guidelines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_dot11phy_dot11PhyDSSSTable_dot11CurrentChannel in p80211metadef.h

Rename DIDmib_dot11phy_dot11PhyDSSSTable_dot11CurrentChannel in
p80211metadef.h to DIDMIB_DOT11PHY_DSSSTABLE_CURRENTCHANNEL to fix
"Avoid CamelCase" message from checkpatch and conform to the coding
style guidelines. Also shorten name by removing repeated use of
"DOT11" and "DOT11PHY" to ease readability and reduce long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_dot11phy_dot11PhyDSSSTable in p80211metadef.h

Rename DIDmib_dot11phy_dot11PhyDSSSTable in p80211metadef.h to
DIDMIB_DOT11PHY_DSSSTABLE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines. Also shorten
name by removing repeated use of "DOT11PHY" to ease readability and
reduce long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_dot11phy_dot11PhyTxPowerTable_dot11CurrentTxPowerLevel in p80211metadef.h

Rename DIDmib_dot11phy_dot11PhyTxPowerTable_dot11CurrentTxPowerLevel
in p80211metadef.h to DIDMIB_DOT11PHY_TXPOWERTABLE_CURRENTTXPOWERLEVEL
to fix "Avoid CamelCase" message from checkpatch and conform to the
coding style guidelines. Also shorten name by removing repeated use of
"DOT11" and "DOT11PHY" to ease readability and reduce long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_dot11phy_dot11PhyOperationTable in p80211metadef.h

Rename DIDmib_dot11phy_dot11PhyOperationTable in p80211metadef.h to
DIDMIB_DOT11PHY_OPERATIONTABLE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines. Also shorten
name by removing repeated use of "DOT11PHY" to ease readability and
reduce long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_cat_dot11phy in p80211metadef.h

Rename DIDmib_cat_dot11phy in p80211metadef.h to DIDMIB_CAT_DOT11PHY
to fix "Avoid CamelCase" message from checkpatch and conform to the
coding style guidelines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_dot11mac_dot11OperationTable_dot11MaxTransmitMSDULifetime in p80211metadef.h

Rename
DIDmib_dot11mac_dot11OperationTable_dot11MaxTransmitMSDULifetime in
p80211metadef.h to
DIDMIB_DOT11MAC_OPERATIONTABLE_MAXTRANSMITMSDULIFETIME to fix "Avoid
CamelCase" message from checkpatch and conform to the coding style
guidelines. Also shorten name by removing repeated use of "DOT11" to
ease readability and reduce long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_dot11mac_dot11OperationTable_dot11FragmentationThreshold in p80211metadef.h

Rename DIDmib_dot11mac_dot11OperationTable_dot11FragmentationThreshold
in p80211metadef.h to
DIDMIB_DOT11MAC_OPERATIONTABLE_FRAGMENTATIONTHRESHOLD to fix "Avoid
CamelCase" message from checkpatch and conform to the coding style
guidelines. Also shorten name by removing repeated use of "DOT11" to
ease readability and reduce long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_dot11mac_dot11OperationTable_dot11LongRetryLimit in p80211metadef.h

Rename DIDmib_dot11mac_dot11OperationTable_dot11LongRetryLimitin
p80211metadef.h to DIDMIB_DOT11MAC_OPERATIONTABLE_LONGRETRYLIMIT to
fix "Avoid CamelCase" message from checkpatch and conform to the
coding style guidelines. Also shorten name by removing repeated use of
"DOT11" to ease readability and reduce long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_dot11mac_dot11OperationTable_dot11ShortRetryLimit in p80211metadef.h

Rename DIDmib_dot11mac_dot11OperationTable_dot11ShortRetryLimit in
p80211metadef.h to DIDMIB_DOT11MAC_OPERATIONTABLE_SHORTRETRYLIMIT to
fix "Avoid CamelCase" message from checkpatch and conform to the
coding style guidelines. Also shorten name by removing repeated use of
"DOT11" to ease readability and reduce long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: DIDmib_dot11mac_dot11OperationTable_dot11RTSThreshold in p80211metadef.h

Rename DIDmib_dot11mac_dot11OperationTable_dot11RTSThreshold in
p80211metadef.h to DIDMIB_DOT11MAC_OPERATIONTABLE_RTSTHRESHOLD to fix
"Avoid CamelCase" message from checkpatch and conform to the coding
style guidelines. Also shorten name by removing repeated use of
"DOT11" to ease readability and reduce long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_dot11mac_dot11OperationTable_dot11MACAddress in p80211metadef.h

Rename DIDmib_dot11mac_dot11OperationTable_dot11MACAddress in
p80211metadef.h to DIDMIB_DOT11MAC_OPERATIONTABLE_MACADDRESS to fix
"Avoid CamelCase" message from checkpatch and conform to the coding
style guidelines. Also shorten name by removing repeated use of
"DOT11" to ease readability and reduce long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_dot11mac_dot11OperationTable in p80211metadef.h

Rename DIDmib_dot11mac_dot11OperationTable in p80211metadef.h to
DIDMIB_DOT11MAC_OPERATIONTABLE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines. Also shorten
name by removing repeated use of "DOT11" to ease readability and
reduce long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_dot11smt_dot11PrivacyTable_dot11ExcludeUnencrypted in p80211metadef.h

Rename DIDmib_dot11smt_dot11PrivacyTable_dot11ExcludeUnencrypted in
p80211metadef.h to DIDMIB_DOT11SMT_PRIVACYTABLE_EXCLUDEUNENCRYPTED to
fix "Avoid CamelCase" message from checkpatch and conform to the
coding style guidelines. Also shorten name by removing repeated use of
"DOT11" to ease readability and reduce long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_dot11smt_dot11PrivacyTable_dot11WEPDefaultKeyID in p80211metadef.h

Rename DIDmib_dot11smt_dot11PrivacyTable_dot11WEPDefaultKeyID in
p80211metadef.h to DIDMIB_DOT11SMT_PRIVACYTABLE_WEPDEFAULTKEYID to fix
"Avoid CamelCase" message from checkpatch and conform to the coding
style guidelines. Also shorten name by removing repeated use of
"DOT11" to ease readability and reduce long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_dot11smt_dot11PrivacyTable_dot11PrivacyInvoked in p80211metadef.h

Rename DIDmib_dot11smt_dot11PrivacyTable_dot11PrivacyInvoked to
DIDMIB_DOT11SMT_PRIVACYTABLE_PRIVACYINVOKED to fix "Avoid CamelCase"
message from checkpatch and conform to the coding style
guidelines. Also shorten name by removing repeated use of "DOT11" to
ease readability and reduce long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_dot11smt_dot11PrivacyTable in p80211metadef.h

Rename DIDmib_dot11smt_dot11PrivacyTable to
DIDMIB_DOT11SMT_PRIVACYTABLE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines. Also shorten
name by removing repeated use of "DOT11" to ease readability and
reduce long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_dot11smt_dot11WEPDefaultKeysTable_key in p80211metadef.h

Rename DIDmib_dot11smt_dot11WEPDefaultKeysTable_key in p80211metadef.h
to didmib_dot11smt_wepdefaultkeystable_key to fix "Avoid CamelCase"
message from checkpatch and conform to the coding style
guidelines. Also shorten name by removing repeated use of "DOT11" to
ease readability and reduce long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_dot11smt_dot11WEPDefaultKeysTable in p80211metadef.h

Rename DIDmib_dot11smt_dot11WEPDefaultKeysTable in p80211metadef.h to
DIDMIB_DOT11SMT_WEPDEFAULTKEYSTABLE to fix "Avoid CamelCase" message
from checkpatch and conform to the coding style guidelines. Also
shorten name by removing repeated use of "DOT11" to ease readability
and reduce long lines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmib_cat_dot11smt in p80211metadef.h

Rename DIDmib_cat_dot11smt in p80211metadef.h to DIDMIB_CAT_DOT11SMT
to fix "Avoid CamelCase" message from checkpatch and conform to the
coding style guidelines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmsg_p2req_flashdl_write in p80211metadef.h

Rename DIDmsg_p2req_flashdl_write in p80211metadef.h to
DIDMSG_P2REQ_FLASHDL_WRITE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmsg_p2req_flashdl_state in p80211metadef.h

Rename DIDmsg_p2req_flashdl_state in p80211metadef.h to
DIDMSG_P2REQ_FLASHDL_STATE to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmsg_p2req_ramdl_write_resultcode in p80211metadef.h

Rename DIDmsg_p2req_ramdl_write_resultcode in p80211metadef.h to
DIDMSG_P2REQ_RAMDL_WRITE_RESULTCODE to fix "Avoid CamelCase" message
from checkpatch and conform to the coding style guidelines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmsg_p2req_ramdl_write_data in p80211metadef.h

Rename DIDmsg_p2req_ramdl_write_data in p80211metadef.h to
DIDMSG_P2REQ_RAMDL_WRITE_DATA to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmsg_p2req_ramdl_write_len in p80211metadef.h

Rename DIDmsg_p2req_ramdl_write_len to DIDMSG_P2REQ_RAMDL_WRITE_LEN to
fix "Avoid CamelCase" message from checkpatch and conform to the
coding style guidelines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rename DIDmsg_p2req_ramdl_write_addr in p80211metadef.h

Rename DIDmsg_p2req_ramdl_write_addr in p80211metadef.h to
DIDMSG_P2REQ_RAMDL_WRITE_ADDR to fix "Avoid CamelCase" message from
checkpatch and conform to the coding style guidelines.

Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>