USB: xhci: dbc: fix tty registration race

commit 880de403777376e50bdf60def359fa50a722006f upstream.

Make sure to allocate resources before registering the tty device to
avoid having a racing open() and write() fail to enable rx or
dereference a NULL pointer when accessing the uninitialised fifo.

Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Cc: stable@vger.kernel.org # 4.16
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211008092547.3996295-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: add Ice Lake-N device id.

commit 75c10c5e7a715550afdd51ef8cfd1d975f48f9e1 upstream.

Add Ice Lake-N device ID.

The device can be found on MacBookPro16,2 [1].

[1]: https://linux-hardware.org/?probe=f1c5cf0c43

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211001173644.16068-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/resctrl: Free the ctrlval arrays when domain_setup_mon_state() fails

commit 64e87d4bd3201bf8a4685083ee4daf5c0d001452 upstream.

domain_add_cpu() is called whenever a CPU is brought online. The
earlier call to domain_setup_ctrlval() allocates the control value
arrays.

If domain_setup_mon_state() fails, the control value arrays are not
freed.

Add the missing kfree() calls.

Fixes: 1bd2a63b4f0de ("x86/intel_rdt/mba_sc: Add initialization support")
Fixes: edf6fa1c4a951 ("x86/intel_rdt/cqm: Add RMID (Resource monitoring ID) management")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20210917165958.28313-1-james.morse@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix abort logic in btrfs_replace_file_extents

commit 4afb912f439c4bc4e6a4f3e7547f2e69e354108f upstream.

Error injection testing uncovered a case where we'd end up with a
corrupt file system with a missing extent in the middle of a file.  This
occurs because the if statement to decide if we should abort is wrong.

The only way we would abort in this case is if we got a ret !=
-EOPNOTSUPP and we called from the file clone code.  However the
prealloc code uses this path too.  Instead we need to abort if there is
an error, and the only error we _don't_ abort on is -EOPNOTSUPP and only
if we came from the clone file code.

CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: update refs for any root except tree log roots

commit d175209be04d7d263fa1a54cde7608c706c9d0d7 upstream.

I hit a stuck relocation on btrfs/061 during my overnight testing.  This
turned out to be because we had left over extent entries in our extent
root for a data reloc inode that no longer existed.  This happened
because in btrfs_drop_extents() we only update refs if we have SHAREABLE
set or we are the tree_root.  This regression was introduced by
aeb935a45581 ("btrfs: don't set SHAREABLE flag for data reloc tree")
where we stopped setting SHAREABLE for the data reloc tree.

The problem here is we actually do want to update extent references for
data extents in the data reloc tree, in fact we only don't want to
update extent references if the file extents are in the log tree.
Update this check to only skip updating references in the case of the
log tree.

This is relatively rare, because you have to be running scrub at the
same time, which is what btrfs/061 does.  The data reloc inode has its
extents pre-allocated, and then we copy the extent into the
pre-allocated chunks.  We theoretically should never be calling
btrfs_drop_extents() on a data reloc inode.  The exception of course is
with scrub, if our pre-allocated extent falls inside of the block group
we are scrubbing, then the block group will be marked read only and we
will be forced to cow that extent.  This means we will call
btrfs_drop_extents() on that range when we COW that file extent.

This isn't really problematic if we do this, the data reloc inode
requires that our extent lengths match exactly with the extent we are
copying, thankfully we validate the extent is correct with
get_new_location(), so if we happen to COW only part of the extent we
won't link it in when we do the relocation, so we are safe from any
other shenanigans that arise because of this interaction with scrub.

Fixes: aeb935a45581 ("btrfs: don't set SHAREABLE flag for data reloc tree")
CC: stable@vger.kernel.org # 5.8+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: check for error when looking up inode during dir entry replay

commit cfd312695b71df04c3a2597859ff12c470d1e2e4 upstream.

At replay_one_name(), we are treating any error from btrfs_lookup_inode()
as if the inode does not exists. Fix this by checking for an error and
returning it to the caller.

CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: deal with errors when adding inode reference during log replay

commit 52db77791fe24538c8aa2a183248399715f6b380 upstream.

At __inode_add_ref(), we treating any error returned from
btrfs_lookup_dir_item() or from btrfs_lookup_dir_index_item() as meaning
that there is no existing directory entry in the fs/subvolume tree.
This is not correct since we can get errors such as, for example, -EIO
when reading extent buffers while searching the fs/subvolume's btree.

So fix that and return the error to the caller when it is not -ENOENT.

CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: deal with errors when replaying dir entry during log replay

commit e15ac6413745e3def00e663de00aea5a717311c1 upstream.

At replay_one_one(), we are treating any error returned from
btrfs_lookup_dir_item() or from btrfs_lookup_dir_index_item() as meaning
that there is no existing directory entry in the fs/subvolume tree.
This is not correct since we can get errors such as, for example, -EIO
when reading extent buffers while searching the fs/subvolume's btree.

So fix that and return the error to the caller when it is not -ENOENT.

CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: unlock newly allocated extent buffer after error

commit 19ea40dddf1833db868533958ca066f368862211 upstream.

[BUG]
There is a bug report that injected ENOMEM error could leave a tree
block locked while we return to user-space:

  BTRFS info (device loop0): enabling ssd optimizations
  FAULT_INJECTION: forcing a failure.
  name failslab, interval 1, probability 0, space 0, times 0
  CPU: 0 PID: 7579 Comm: syz-executor Not tainted 5.15.0-rc1 #16
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
  rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
  Call Trace:
   __dump_stack lib/dump_stack.c:88 [inline]
   dump_stack_lvl+0x8d/0xcf lib/dump_stack.c:106
   fail_dump lib/fault-inject.c:52 [inline]
   should_fail+0x13c/0x160 lib/fault-inject.c:146
   should_failslab+0x5/0x10 mm/slab_common.c:1328
   slab_pre_alloc_hook.constprop.99+0x4e/0xc0 mm/slab.h:494
   slab_alloc_node mm/slub.c:3120 [inline]
   slab_alloc mm/slub.c:3214 [inline]
   kmem_cache_alloc+0x44/0x280 mm/slub.c:3219
   btrfs_alloc_delayed_extent_op fs/btrfs/delayed-ref.h:299 [inline]
   btrfs_alloc_tree_block+0x38c/0x670 fs/btrfs/extent-tree.c:4833
   __btrfs_cow_block+0x16f/0x7d0 fs/btrfs/ctree.c:415
   btrfs_cow_block+0x12a/0x300 fs/btrfs/ctree.c:570
   btrfs_search_slot+0x6b0/0xee0 fs/btrfs/ctree.c:1768
   btrfs_insert_empty_items+0x80/0xf0 fs/btrfs/ctree.c:3905
   btrfs_new_inode+0x311/0xa60 fs/btrfs/inode.c:6530
   btrfs_create+0x12b/0x270 fs/btrfs/inode.c:6783
   lookup_open+0x660/0x780 fs/namei.c:3282
   open_last_lookups fs/namei.c:3352 [inline]
   path_openat+0x465/0xe20 fs/namei.c:3557
   do_filp_open+0xe3/0x170 fs/namei.c:3588
   do_sys_openat2+0x357/0x4a0 fs/open.c:1200
   do_sys_open+0x87/0xd0 fs/open.c:1216
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x34/0xb0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x44/0xae
  RIP: 0033:0x46ae99
  Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48
  89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d
  01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
  RSP: 002b:00007f46711b9c48 EFLAGS: 00000246 ORIG_RAX: 0000000000000055
  RAX: ffffffffffffffda RBX: 000000000078c0a0 RCX: 000000000046ae99
  RDX: 0000000000000000 RSI: 00000000000000a1 RDI: 0000000020005800
  RBP: 00007f46711b9c80 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000017
  R13: 0000000000000000 R14: 000000000078c0a0 R15: 00007ffc129da6e0

  ================================================
  WARNING: lock held when returning to user space!
  5.15.0-rc1 #16 Not tainted
  ------------------------------------------------
  syz-executor/7579 is leaving the kernel with locks still held!
  1 lock held by syz-executor/7579:
   #0: ffff888104b73da8 (btrfs-tree-01/1){+.+.}-{3:3}, at:
  __btrfs_tree_lock+0x2e/0x1a0 fs/btrfs/locking.c:112

[CAUSE]
In btrfs_alloc_tree_block(), after btrfs_init_new_buffer(), the new
extent buffer @buf is locked, but if later operations like adding
delayed tree ref fail, we just free @buf without unlocking it,
resulting above warning.

[FIX]
Unlock @buf in out_free_buf: label.

Reported-by: Hao Sun <sunhao.th@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CACkBjsZ9O6Zr0KK1yGn=1rQi6Crh1yeCRdTSBxx9R99L4xdn-Q@mail.gmail.com/
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm: Avoid potential overflow in timeout_to_jiffies()

commit 171316a68d9a8e0d9e28b7cf4c15afc4c6244a4e upstream.

The return type of ktime_divns() is s64. The timeout_to_jiffies() currently
assigns the result of this ktime_divns() to unsigned long, which on 32 bit
systems may overflow. Furthermore, the result of this function is sometimes
also passed to functions which expect signed long, dma_fence_wait_timeout()
is one such example.

Fix this by adjusting the type of remaining_jiffies to s64, so we do not
suffer overflow there, and return a value limited to range of 0..INT_MAX,
which is safe for all usecases of this timeout.

The above overflow can be triggered if userspace passes in too large timeout
value, larger than INT_MAX / HZ seconds. The kernel detects it and complains
about "schedule_timeout: wrong timeout value %lx" and generates a warning
backtrace.

Note that this fixes commit 6cedb8b377bb ("drm/msm: avoid using 'timespec'"),
because the previously used timespec_to_jiffies() function returned unsigned
long instead of s64:
static inline unsigned long timespec_to_jiffies(const struct timespec *value)

Fixes: 6cedb8b377bb ("drm/msm: avoid using 'timespec'")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Rob Clark <robdclark@chromium.org>
Cc: stable@vger.kernel.org # 5.6+
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210917005913.157379-1-marex@denx.de
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64/hugetlb: fix CMA gigantic page order for non-4K PAGE_SIZE

commit 2e5809a4ddb15969503e43b06662a9a725f613ea upstream.

For non-4K PAGE_SIZE configs, the largest gigantic huge page size is
CONT_PMD_SHIFT order. On arm64 with 64K PAGE_SIZE, the gigantic page is
16G. Therefore, one should be able to specify 'hugetlb_cma=16G' on the
kernel command line so that one gigantic page can be allocated from CMA.
However, when adding such an option the following message is produced:

hugetlb_cma: cma area should be at least 8796093022208 MiB

This is because the calculation for non-4K gigantic page order is
incorrect in the arm64 specific routine arm64_hugetlb_cma_reserve().

Fixes: abb7962adc80 ("arm64/hugetlb: Reserve CMA areas for gigantic pages on 16K and 64K configs")
Cc: <stable@vger.kernel.org> # 5.9.x
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20211005202529.213812-1-mike.kravetz@oracle.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

csky: Fixup regs.sr broken in ptrace

commit af89ebaa64de726ca0a39bbb0bf0c81a1f43ad50 upstream.

gpr_get() return the entire pt_regs (include sr) to userspace, if we
don't restore the C bit in gpr_set, it may break the ALU result in
that context. So the C flag bit is part of gpr context, that's why
riscv totally remove the C bit in the ISA. That makes sr reg clear
from userspace to supervisor privilege.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

csky: don't let sigreturn play with priveleged bits of status register

commit fbd63c08cdcca5fb1315aca3172b3c9c272cfb4f upstream.

csky restore_sigcontext() blindly overwrites regs->sr with the value
it finds in sigcontext.  Attacker can store whatever they want in there,
which includes things like S-bit.  Userland shouldn't be able to set
that, or anything other than C flag (bit 0).

Do the same thing other architectures with protected bits in flags
register do - preserve everything that shouldn't be settable in
user mode, picking the rest from the value saved is sigcontext.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Guo Ren <guoren@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: socfpga: agilex: fix duplicate s2f_user0_clk

commit 09540fa337196be20e9f0241652364f09275d374 upstream.

Remove the duplicate s2f_user0_clk and the unused s2f_usr0_mux define.

Fixes: f817c132db67 ("clk: socfpga: agilex: fix up s2f_user0_clk representation")
Cc: stable@vger.kernel.org
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210916225126.1427700-1-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390: fix strrchr() implementation

commit 8e0ab8e26b72a80e991c66a8abc16e6c856abe3d upstream.

Fix two problems found in the strrchr() implementation for s390
architectures: evaluate empty strings (return the string address instead of
NULL, if '\0' is passed as second argument); evaluate the first character
of non-empty strings (the current implementation stops at the second).

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reported-by: Heiko Carstens <hca@linux.ibm.com> (incorrect behavior with empty strings)
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Link: https://lore.kernel.org/r/20211005120836.60630-1-roberto.sassu@huawei.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nds32/ftrace: Fix Error: invalid operands (*UND* and *UND* sections) for `^'

commit be358af1191b1b2fedebd8f3421cafdc8edacc7d upstream.

I received a build failure for a new patch I'm working on the nds32
architecture, and when I went to test it, I couldn't get to my build error,
because it failed to build with a bunch of:

  Error: invalid operands (*UND* and *UND* sections) for `^'

issues with various files. Those files were temporary asm files that looked
like:  kernel/.tmp_mc_fork.s

I decided to look deeper, and found that the "mc" portion of that name
stood for "mcount", and was created by the recordmcount.pl script. One that
I wrote over a decade ago. Once I knew the source of the problem, I was
able to investigate it further.

The way the recordmcount.pl script works (BTW, there's a C version that
simply modifies the ELF object) is by doing an "objdump" on the object
file. Looks for all the calls to "mcount", and creates an offset of those
locations from some global variable it can use (usually a global function
name, found with <.*>:). Creates a asm file that is a table of references
to these locations, using the found variable/function. Compiles it and
links it back into the original object file. This asm file is called
".tmp_mc_<object_base_name>.s".

The problem here is that the objdump produced by the nds32 object file,
contains things that look like:

 0000159a <.L3^B1>:
    159a:       c6 00           beqz38 $r6, 159a <.L3^B1>
                        159a: R_NDS32_9_PCREL_RELA      .text+0x159e
    159c:       84 d2           movi55 $r6, #-14
    159e:       80 06           mov55 $r0, $r6
    15a0:       ec 3c           addi10.sp #0x3c

Where ".L3^B1 is somehow selected as the "global" variable to index off of.

Then the assembly file that holds the mcount locations looks like this:

        .section __mcount_loc,"a",@progbits
        .align 2
        .long .L3^B1 + -5522
        .long .L3^B1 + -5384
        .long .L3^B1 + -5270
        .long .L3^B1 + -5098
        .long .L3^B1 + -4970
        .long .L3^B1 + -4758
        .long .L3^B1 + -4122
        [...]

And when it is compiled back to an object to link to the original object,
the compile fails on the "^" symbol.

Simple solution for now, is to have the perl script ignore using function
symbols that have an "^" in the name.

Link: https://lkml.kernel.org/r/20211014143507.4ad2c0f7@gandalf.local.home
Cc: stable@vger.kernel.org
Acked-by: Greentime Hu <green.hu@gmail.com>
Fixes: fbf58a52ac088 ("nds32/ftrace: Add RECORD_MCOUNT support")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Fix the mic type detection issue for ASUS G551JW

commit a3fd1a986e499a06ac5ef95c3a39aa4611e7444c upstream.

We need to define the codec pin 0x1b to be the mic, but somehow
the mic doesn't support hot plugging detection, and Windows also has
this issue, so we set it to phantom headset-mic.

Also the determine_headset_type() often returns the omtp type by a
mistake when we plug a ctia headset, this makes the mic can't record
sound at all. Because most of the headset are ctia type nowadays and
some machines have the fixed ctia type audio jack, it is possible this
machine has the fixed ctia jack too. Here we set this mic jack to
fixed ctia type, this could avoid the mic type detection mistake and
make the ctia headset work stable.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214537
Reported-and-tested-by: msd <msd.mmq@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20211012114748.5238-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo 13s Gen2

commit 023a062f238129e8a542b5163c4350ceb076283e upstream.

The previous patch's HDA verb initialization for the Lenovo 13s
sequence was slightly off. This updated verb sequence has been tested
and confirmed working.

Fixes: ad7cc2d41b7a ("ALSA: hda/realtek: Quirks to enable speaker output for Lenovo Legion 7i 15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 laptops.")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208555
Cc: <stable@vger.kernel.org>
Signed-off-by: Cameron Berkenpas <cam@neo-zeon.de>
Link: https://lore.kernel.org/r/20211010225410.23423-1-cam@neo-zeon.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for TongFang PHxTxX1

commit dd6dd6e3c791db7fdbc5433ec7e450717aa3a0ce upstream.

This applies a SND_PCI_QUIRK(...) to the TongFang PHxTxX1 barebone. This
fixes the issue of the internal Microphone not working after booting
another OS.

When booting a certain another OS this barebone keeps some coeff settings
even after a cold shutdown. These coeffs prevent the microphone detection
from working in Linux, making the Laptop think that there is always an
external microphone plugged-in and therefore preventing the use of the
internal one.

The relevant indexes and values where gathered by naively diff-ing and
reading a working and a non-working coeff dump.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211006130415.538243-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - ALC236 headset MIC recording issue

commit 5aec98913095ed3b4424ed6c5fdeb6964e9734da upstream.

In power save mode, the recording voice from headset mic will 2s more delay.
Add this patch will solve this issue.

[ minor coding style fix by tiwai ]

Signed-off-by: Kailang Yang <kailang@realtek.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/ccb0cdd5bbd7486eabbd8d987d384cb0@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirk for Clevo X170KM-G

commit cc03069a397005da24f6783835c274d5aedf6043 upstream.

This applies a SND_PCI_QUIRK(...) to the Clevo X170KM-G barebone. This
fixes the issue of the devices internal Speaker not working.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211001133111.428249-3-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Complete partial device name to avoid ambiguity

commit 1f8d398e1cd8813f8ec16d55c086e8270a9c18ab upstream.

The string "Clevo X170" is not enough to unambiguously identify the correct
device.

Fixing it so another Clevo barebone name starting with "X170" can be added
without causing confusion.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211001133111.428249-2-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Enable headphone mic on Dell Latitude laptops with ALC3254

commit 2b987fe84429361c7f189568c476d1bd00d2ff7e upstream.

The headphone mic is not working on Dell Latitude laptops with ALC3254.
The codec vendor id is 0x10ec0295 and share the same pincfg as defined
in ALC295_STANDARD_PINS. So the ALC269_FIXUP_DELL1_MIC_NO_PRESENCE will
be applied per alc269_pin_fixup_tbl[] but actually the headphone mic is
using NID 0x1b instead of 0x1a. The ALC269_FIXUP_DELL4_MIC_NO_PRESENCE
need to be applied instead.

Use ALC269_FIXUP_DELL4_MIC_NO_PRESENCE for particular models before
a generic fixup comes out.

Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211001062856.1037901-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Enable 4-speaker output for Dell Precision 5560 laptop

commit eb676622846b34a751e2ff9b5910a5322a4e0000 upstream.

The Dell Precision 5560 laptop appears to use the 4-speakers-on-ALC289
audio just like its sibling product XPS 9510, so it requires the same
quirk to enable woofer output. Tested on my Dell Precision 5560.

Signed-off-by: John Liu <johnliu55tw@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210930115316.659-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: Fix a potential UAF by wrong private_free call order

commit 1f8763c59c4ec6254d629fe77c0a52220bd907aa upstream.

John Keeping reported and posted a patch for a potential UAF in
rawmidi sequencer destruction: the snd_rawmidi_dev_seq_free() may be
called after the associated rawmidi object got already freed.
After a deeper look, it turned out that the bug is rather the
incorrect private_free call order for a snd_seq_device.  The
snd_seq_device private_free gets called at the release callback of the
sequencer device object, while this was rather expected to be executed
at the snd_device call chains that runs at the beginning of the whole
card-free procedure.  It's been broken since the rewrite of
sequencer-device binding (although it hasn't surfaced because the
sequencer device release happens usually right along with the card
device release).

This patch corrects the private_free call to be done in the right
place, at snd_seq_device_dev_free().

Fixes: 7c37ae5c625a ("ALSA: seq: Rewrite sequencer device binding with standard bus")
Reported-and-tested-by: John Keeping <john@metanate.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210930114114.8645-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Workaround for a wrong offset in SYNC_PTR compat ioctl

commit 228af5a4fa3a8293bd8b7ac5cf59548ee29627bf upstream.

Michael Forney reported an incorrect padding type that was defined in
the commit 80fe7430c708 ("ALSA: add new 32-bit layout for
snd_pcm_mmap_status/control") for PCM control mmap data.
His analysis is correct, and this caused the misplacements of PCM
control data on 32bit arch and 32bit compat mode.

The bug is that the __pad2 definition in __snd_pcm_mmap_control64
struct was wrongly with __pad_before_uframe, which should have been
__pad_after_uframe instead.  This struct is used in SYNC_PTR ioctl and
control mmap.  Basically this bug leads to two problems:

- The offset of avail_min field becomes wrong, it's placed right after
  appl_ptr without padding on little-endian

- When appl_ptr and avail_min are read as 64bit values in kernel side,
  the values become either zero or corrupted (mixed up)

One good news is that, because both user-space and kernel
misunderstand the wrong offset, at least, 32bit application running on
32bit kernel works as is.  Also, 64bit applications are unaffected
because the padding size is zero.  The remaining problem is the 32bit
compat mode; as mentioned in the above, avail_min is placed right
after appl_ptr on little-endian archs, 64bit kernel reads bogus values
for appl_ptr updates, which may lead to streaming bugs like jumping,
XRUN or whatever unexpected.
(However, we haven't heard any serious bug reports due to this over
years, so practically seen, it's fairly safe to assume that the impact
by this bug is limited.)

Ideally speaking, we should correct the wrong mmap status control
definition.  But this would cause again incompatibility with the
existing binaries, and fixing it (e.g. by renumbering ioctls) would be
really messy.

So, as of this patch, we only correct the behavior of 32bit compat
mode and keep the rest as is.  Namely, the SYNC_PTR ioctl is now
handled differently in compat mode to read/write the 32bit values at
the right offsets.  The control mmap of 32bit apps on 64bit kernels
has been already disabled (which is likely rather an overlook, but
this worked fine at this time :), so covering SYNC_PTR ioctl should
suffice as a fallback.

Fixes: 80fe7430c708 ("ALSA: add new 32-bit layout for snd_pcm_mmap_status/control")
Reported-by: Michael Forney <mforney@mforney.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@vger.kernel.org>
Cc: Rich Felker <dalias@libc.org>
Link: https://lore.kernel.org/r/29QBMJU8DE71E.2YZSH8IHT5HMH@mforney.org
Link: https://lore.kernel.org/r/20211010075546.23220-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add quirk for VF0770

commit 48827e1d6af58f219e89c7ec08dccbca28c7694e upstream.

The device advertises 8 formats, but only a rate of 48kHz is honored
by the hardware and 24 bits give chopped audio, so only report the
one working combination. This fixes out-of-the-box audio experience
with PipeWire which otherwise attempts to choose S24_3LE (while
PulseAudio defaulted to S16_LE).

Signed-off-by: Jonas Hahnfeld <hahnjo@hahnjo.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211012200906.3492-1-hahnjo@hahnjo.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.74

Link: https://lore.kernel.org/r/20211014145207.979449962@linuxfoundation.org
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (pmbus/ibm-cffps) max_power_out swap changes

[ Upstream commit f067d5585cda2de1e47dde914a8a4f151659e0ad ]

The bytes for max_power_out from the ibm-cffps devices differ in byte
order for some power supplies.

The Witherspoon power supply returns the bytes in MSB/LSB order.

The Rainier power supply returns the bytes in LSB/MSB order.

The Witherspoon power supply uses version cffps1. The Rainier power
supply should use version cffps2. If version is cffps1, swap the bytes
before output to max_power_out.

Tested:
    Witherspoon before: 3148. Witherspoon after: 3148.
    Rainier before: 53255. Rainier after: 2000.

Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210928205051.1222815-1-bjwyman@gmail.com
[groeck: Replaced yoda programming]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched: Always inline is_percpu_thread()

[ Upstream commit 83d40a61046f73103b4e5d8f1310261487ff63b0 ]

  vmlinux.o: warning: objtool: check_preemption_disabled()+0x81: call to is_percpu_thread() leaves .noinstr.text section

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210928084218.063371959@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/core: fix userpage->time_enabled of inactive events

[ Upstream commit f792565326825ed806626da50c6f9a928f1079c1 ]

Users of rdpmc rely on the mmapped user page to calculate accurate
time_enabled. Currently, userpage->time_enabled is only updated when the
event is added to the pmu. As a result, inactive event (due to counter
multiplexing) does not have accurate userpage->time_enabled. This can
be reproduced with something like:

   /* open 20 task perf_event "cycles", to create multiplexing */

   fd = perf_event_open();  /* open task perf_event "cycles" */
   userpage = mmap(fd);     /* use mmap and rdmpc */

   while (true) {
     time_enabled_mmap = xxx; /* use logic in perf_event_mmap_page */
     time_enabled_read = read(fd).time_enabled;
     if (time_enabled_mmap > time_enabled_read)
         BUG();
   }

Fix this by updating userpage for inactive events in merge_sched_in.

Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-and-tested-by: Lucian Grijincu <lucian@fb.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210929194313.2398474-1-songliubraving@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: virtio_scsi: Fix spelling mistake "Unsupport" -> "Unsupported"

[ Upstream commit cced4c0ec7c06f5230a2958907a409c849762293 ]

There are a couple of spelling mistakes in pr_info and pr_err messages.
Fix them.

Link: https://lore.kernel.org/r/20210924230330.143785-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ses: Fix unsigned comparison with less than zero

[ Upstream commit dd689ed5aa905daf4ba4c99319a52aad6ea0a796 ]

Fix the following coccicheck warning:

./drivers/scsi/ses.c:137:10-16: WARNING: Unsigned expression compared
with zero: result > 0.

Link: https://lore.kernel.org/r/1632477113-90378-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix gart.bo pin_count leak

[ Upstream commit 66805763a97f8f7bdf742fc0851d85c02ed9411f ]

gmc_v{9,10}_0_gart_disable() isn't called matched with
correspoding gart_enbale function in SRIOV case. This will
lead to gart.bo pin_count leak on driver unload.

Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sun: SUNVNET_COMMON should depend on INET

[ Upstream commit 103bde372f084206c6972be543ecc247ebbff9f3 ]

When CONFIG_INET is not set, there are failing references to IPv4
functions, so make this driver depend on INET.

Fixes these build errors:

sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_start_xmit_common':
sunvnet_common.c:(.text+0x1a68): undefined reference to `__icmp_send'
sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_poll_common':
sunvnet_common.c:(.text+0x358c): undefined reference to `ip_send_check'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Aaron Young <aaron.young@oracle.com>
Cc: Rashmi Narasimhan <rashmi.narasimhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vboxfs: fix broken legacy mount signature checking

[ Upstream commit 9b3b353ef330e20bc2d99bf3165cc044cff26a09 ]

Commit 9d682ea6bcc7 ("vboxsf: Fix the check for the old binary
mount-arguments struct") was meant to fix a build error due to sign
mismatch in 'char' and the use of character constants, but it just moved
the error elsewhere, in that on some architectures characters and signed
and on others they are unsigned, and that's just how the C standard
works.

The proper fix is a simple "don't do that then".  The code was just
being silly and odd, and it should never have cared about signed vs
unsigned characters in the first place, since what it is testing is not
four "characters", but four bytes.

And the way to compare four bytes is by using "memcmp()".

Which compilers will know to just turn into a single 32-bit compare with
a constant, as long as you don't have crazy debug options enabled.

Link: https://lore.kernel.org/lkml/20210927094123.576521-1-arnd@kernel.org/
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: check return value of rhashtable_init

[ Upstream commit 111461d573741c17eafad029ac93474fa9adcce0 ]

When rhashtable_init() fails, it returns -EINVAL.
However, since error return value of rhashtable_init is not checked,
it can cause use of uninitialized pointers.
So, fix unhandled errors of rhashtable_init.

Signed-off-by: MichelleJin <shjy180909@gmail.com>
Link: https://lore.kernel.org/r/20210927033457.1020967-4-shjy180909@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: prevent user from passing illegal stab size

[ Upstream commit b193e15ac69d56f35e1d8e2b5d16cbd47764d053 ]

We observed below report when playing with netlink sock:

  UBSAN: shift-out-of-bounds in net/sched/sch_api.c:580:10
  shift exponent 249 is too large for 32-bit type
  CPU: 0 PID: 685 Comm: a.out Not tainted
  Call Trace:
   dump_stack_lvl+0x8d/0xcf
   ubsan_epilogue+0xa/0x4e
   __ubsan_handle_shift_out_of_bounds+0x161/0x182
   __qdisc_calculate_pkt_len+0xf0/0x190
   __dev_queue_xmit+0x2ed/0x15b0

it seems like kernel won't check the stab log value passing from
user, and will use the insane value later to calculate pkt_len.

This patch just add a check on the size/cell_log to avoid insane
calculation.

Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (ltc2947) Properly handle errors when looking for the external clock

[ Upstream commit 6f7d70467121f790b36af2d84bc02b5c236bf5e6 ]

The return value of devm_clk_get should in general be propagated to
upper layer. In this case the clk is optional, use the appropriate
wrapper instead of interpreting all errors as "The optional clk is not
available".

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210923201113.398932-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

m68k: Handle arrivals of multiple signals correctly

[ Upstream commit 4bb0bd81ce5e97092dfda6a106d414b703ec0ee8 ]

When we have several pending signals, have entered with the kernel
with large exception frame *and* have already built at least one
sigframe, regs->stkadj is going to be non-zero and regs->format/sr/pc
are going to be junk - the real values are in shifted exception stack
frame we'd built when putting together the first sigframe.

If that happens, subsequent sigframes are going to be garbage.
Not hard to fix - just need to find the "adjusted" frame first
and look for format/vector/sr/pc in it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/YP2dBIAPTaVvHiZ6@zeniv-ca.linux.org.uk
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: Drop frames from invalid MAC address in ad-hoc mode

[ Upstream commit a6555f844549cd190eb060daef595f94d3de1582 ]

WARNING: CPU: 1 PID: 9 at net/mac80211/sta_info.c:554
sta_info_insert_rcu+0x121/0x12a0
Modules linked in:
CPU: 1 PID: 9 Comm: kworker/u8:1 Not tainted 5.14.0-rc7+ #253
Workqueue: phy3 ieee80211_iface_work
RIP: 0010:sta_info_insert_rcu+0x121/0x12a0
...
Call Trace:
 ieee80211_ibss_finish_sta+0xbc/0x170
 ieee80211_ibss_work+0x13f/0x7d0
 ieee80211_iface_work+0x37a/0x500
 process_one_work+0x357/0x850
 worker_thread+0x41/0x4d0

If an Ad-Hoc node receives packets with invalid source MAC address,
it hits a WARN_ON in sta_info_insert_check(), this can spam the log.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210827144230.39944-1-yuehaibing@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_nat_masquerade: defer conntrack walk to work queue

[ Upstream commit 7970a19b71044bf4dc2c1becc200275bdf1884d4 ]

The ipv4 and device notifiers are called with RTNL mutex held.
The table walk can take some time, better not block other RTNL users.

'ip a' has been reported to block for up to 20 seconds when conntrack table
has many entries and device down events are frequent (e.g., PPP).

Reported-and-tested-by: Martin Zaharinov <micron10@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_nat_masquerade: make async masq_inet6_event handling generic

[ Upstream commit 30db406923b9285a9bac06a6af5e74bd6d0f1d06 ]

masq_inet6_event is called asynchronously from system work queue,
because the inet6 notifier is atomic and nf_iterate_cleanup can sleep.

The ipv4 and device notifiers call nf_iterate_cleanup directly.

This is legal, but these notifiers are called with RTNL mutex held.
A large conntrack table with many devices coming and going will have severe
impact on the system usability, with 'ip a' blocking for several seconds.

This change places the defer code into a helper and makes it more
generic so ipv4 and ifdown notifiers can be converted to defer the
cleanup walk as well in a follow patch.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: loader: release_firmware() on load failure to avoid batching

[ Upstream commit 8a8e1813ffc35111fc0b6db49968ceb0e1615ced ]

Invoke release_firmware() when the firmware fails to boot in
sof_probe_continue().

The request_firmware() framework must be informed of failures in
sof_probe_continue() otherwise its internal "batching"
feature (different from caching) cached the firmware image
forever. Attempts to correct the file in /lib/firmware/ were then
silently and confusingly ignored until the next reboot. Unloading the
drivers did not help because from their disconnected perspective the
firmware had failed so there was nothing to release.

Also leverage the new snd_sof_fw_unload() function to simplify the
snd_sof_device_remove() function.

Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210916085008.28929-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: wacom: Add new Intuos BT (CTL-4100WL/CTL-6100WL) device IDs

[ Upstream commit 0c8fbaa553077630e8eae45bd9676cfc01836aeb ]

Add the new PIDs to wacom_wac.c to support the new models in the Intuos series.

[jkosina@suse.cz: fix changelog]
Signed-off-by: Joshua Dickens <joshua.dickens@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ip6_tables: zero-initialize fragment offset

[ Upstream commit 310e2d43c3ad429c1fba4b175806cf1f55ed73a6 ]

ip6tables only sets the `IP6T_F_PROTO` flag on a rule if a protocol is
specified (`-p tcp`, for example).  However, if the flag is not set,
`ip6_packet_match` doesn't call `ipv6_find_hdr` for the skb, in which
case the fragment offset is left uninitialized and a garbage value is
passed to each matcher.

Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: apple: Fix logical maximum and usage maximum of Magic Keyboard JIS

[ Upstream commit 67fd71ba16a37c663d139f5ba5296f344d80d072 ]

Apple Magic Keyboard(JIS)'s Logical Maximum and Usage Maximum are wrong.

Below is a report descriptor.

0x05, 0x01,         /*  Usage Page (Desktop),                           */
0x09, 0x06,         /*  Usage (Keyboard),                               */
0xA1, 0x01,         /*  Collection (Application),                       */
0x85, 0x01,         /*      Report ID (1),                              */
0x05, 0x07,         /*      Usage Page (Keyboard),                      */
0x15, 0x00,         /*      Logical Minimum (0),                        */
0x25, 0x01,         /*      Logical Maximum (1),                        */
0x19, 0xE0,         /*      Usage Minimum (KB Leftcontrol),             */
0x29, 0xE7,         /*      Usage Maximum (KB Right GUI),               */
0x75, 0x01,         /*      Report Size (1),                            */
0x95, 0x08,         /*      Report Count (8),                           */
0x81, 0x02,         /*      Input (Variable),                           */
0x95, 0x05,         /*      Report Count (5),                           */
0x75, 0x01,         /*      Report Size (1),                            */
0x05, 0x08,         /*      Usage Page (LED),                           */
0x19, 0x01,         /*      Usage Minimum (01h),                        */
0x29, 0x05,         /*      Usage Maximum (05h),                        */
0x91, 0x02,         /*      Output (Variable),                          */
0x95, 0x01,         /*      Report Count (1),                           */
0x75, 0x03,         /*      Report Size (3),                            */
0x91, 0x03,         /*      Output (Constant, Variable),                */
0x95, 0x08,         /*      Report Count (8),                           */
0x75, 0x01,         /*      Report Size (1),                            */
0x15, 0x00,         /*      Logical Minimum (0),                        */
0x25, 0x01,         /*      Logical Maximum (1),                        */

here is a report descriptor which is parsed one in kernel.
see sys/kernel/debug/hid/<dev>/rdesc

05 01 09 06 a1 01 85 01 05 07
15 00 25 01 19 e0 29 e7 75 01
95 08 81 02 95 05 75 01 05 08
19 01 29 05 91 02 95 01 75 03
91 03 95 08 75 01 15 00 25 01
06 00 ff 09 03 81 03 95 06 75
08 15 00 25 [65] 05 07 19 00 29
[65] 81 00 95 01 75 01 15 00 25
01 05 0c 09 b8 81 02 95 01 75
01 06 01 ff 09 03 81 02 95 01
75 06 81 03 06 02 ff 09 55 85
55 15 00 26 ff 00 75 08 95 40
b1 a2 c0 06 00 ff 09 14 a1 01
85 90 05 84 75 01 95 03 15 00
25 01 09 61 05 85 09 44 09 46
81 02 95 05 81 01 75 08 95 01
15 00 26 ff 00 09 65 81 02 c0
00

Position 64(Logical Maximum) and 70(Usage Maximum) are 101.
Both should be 0xE7 to support JIS specific keys(ろ, Eisu, Kana, |) support.
position 117 is also 101 but not related(it is Usage 65h).

There are no difference of product id between JIS and ANSI.
They are same 0x0267.

Signed-off-by: Mizuho Mori <morimolymoly@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: sof_sdw: tag SoundWire BEs as non-atomic

[ Upstream commit 58eafe1ff52ee1ce255759fc15729519af180cbb ]

The SoundWire BEs make use of 'stream' functions for .prepare and
.trigger. These functions will in turn force a Bank Switch, which
implies a wait operation.

Mark SoundWire BEs as nonatomic for consistency, but keep all other
types of BEs as is. The initialization of .nonatomic is done outside
of the create_sdw_dailink helper to avoid adding more parameters to
deal with a single exception to the rule that BEs are atomic.

Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210907184436.33152-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: correct the error path of ext4_write_inline_data_end()

[ Upstream commit 55ce2f649b9e88111270333a8127e23f4f8f42d7 ]

Current error path of ext4_write_inline_data_end() is not correct.

Firstly, it should pass out the error value if ext4_get_inode_loc()
return fail, or else it could trigger infinite loop if we inject error
here. And then it's better to add inode to orphan list if it return fail
in ext4_journal_stop(), otherwise we could not restore inline xattr
entry after power failure. Finally, we need to reset the 'ret' value if
ext4_write_inline_data_end() return success in ext4_write_end() and
ext4_journalled_write_end(), otherwise we could not get the error return
value of ext4_journal_stop().

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210716122024.1105856-3-yi.zhang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: check and update i_disksize properly

[ Upstream commit 4df031ff5876d94b48dd9ee486ba5522382a06b2 ]

After commit 3da40c7b0898 ("ext4: only call ext4_truncate when size <=
isize"), i_disksize could always be updated to i_size in ext4_setattr(),
and we could sure that i_disksize <= i_size since holding inode lock and
if i_disksize < i_size there are delalloc writes pending in the range
upto i_size. If the end of the current write is <= i_size, there's no
need to touch i_disksize since writeback will push i_disksize upto
i_size eventually. So we can switch to check i_size instead of
i_disksize in ext4_da_write_end() when write to the end of the file.
we also could remove ext4_mark_inode_dirty() together because we defer
inode dirtying to generic_write_end() or ext4_da_write_inline_data_end().

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210716122024.1105856-2-yi.zhang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.10.73

Link: https://lore.kernel.org/r/20211011134508.362906295@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211011153306.939942789@linuxfoundation.org
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/r/20211012093348.134236881@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/hpet: Use another crystalball to evaluate HPET usability

commit 6e3cd95234dc1eda488f4f487c281bac8fef4d9b upstream.

On recent Intel systems the HPET stops working when the system reaches PC10
idle state.

The approach of adding PCI ids to the early quirks to disable HPET on
these systems is a whack a mole game which makes no sense.

Check for PC10 instead and force disable HPET if supported. The check is
overbroad as it does not take ACPI, intel_idle enablement and command
line parameters into account. That's fine as long as there is at least
PMTIMER available to calibrate the TSC frequency. The decision can be
overruled by adding "hpet=force" on the kernel command line.

Remove the related early PCI quirks for affected Ice Cake and Coffin Lake
systems as they are not longer required. That should also cover all
other systems, i.e. Tiger Rag and newer generations, which are most
likely affected by this as well.

Fixes: Yet another hardware trainwreck
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Cc: stable@vger.kernel.org
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry: Clear X86_FEATURE_SMAP when CONFIG_X86_SMAP=n

commit 3958b9c34c2729597e182cc606cc43942fd19f7c upstream.

Commit

  3c73b81a9164 ("x86/entry, selftests: Further improve user entry sanity checks")

added a warning if AC is set when in the kernel.

Commit

  662a0221893a3d ("x86/entry: Fix AC assertion")

changed the warning to only fire if the CPU supports SMAP.

However, the warning can still trigger on a machine that supports SMAP
but where it's disabled in the kernel config and when running the
syscall_nt selftest, for example:

  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 49 at irqentry_enter_from_user_mode
  CPU: 0 PID: 49 Comm: init Tainted: G                T 5.15.0-rc4+ #98 e6202628ee053b4f310759978284bd8bb0ce6905
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
  RIP: 0010:irqentry_enter_from_user_mode
  ...
  Call Trace:
   ? irqentry_enter
   ? exc_general_protection
   ? asm_exc_general_protection
   ? asm_exc_general_protectio

IS_ENABLED(CONFIG_X86_SMAP) could be added to the warning condition, but
even this would not be enough in case SMAP is disabled at boot time with
the "nosmap" parameter.

To be consistent with "nosmap" behaviour, clear X86_FEATURE_SMAP when
!CONFIG_X86_SMAP.

Found using entry-fuzz + satrandconfig.

 [ bp: Massage commit message. ]

Fixes: 3c73b81a9164 ("x86/entry, selftests: Further improve user entry sanity checks")
Fixes: 662a0221893a ("x86/entry: Fix AC assertion")
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20211003223423.8666-1-vegard.nossum@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry: Correct reference to intended CONFIG_64_BIT

commit 2c861f2b859385e9eaa6e464a8a7435b5a6bf564 upstream.

Commit in Fixes adds a condition with IS_ENABLED(CONFIG_64_BIT),
but the intended config item is called CONFIG_64BIT, as defined in
arch/x86/Kconfig.

Fortunately, scripts/checkkconfigsymbols.py warns:

64_BIT
Referencing files: arch/x86/include/asm/entry-common.h

Correct the reference to the intended config symbol.

Fixes: 662a0221893a ("x86/entry: Fix AC assertion")
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20210803113531.30720-2-lukas.bulwahn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/sev: Return an error on a returned non-zero SW_EXITINFO1[31:0]

commit 06f2ac3d4219bbbfd93d79e01966a42053084f11 upstream.

After returning from a VMGEXIT NAE event, SW_EXITINFO1[31:0] is checked
for a value of 1, which indicates an error and that SW_EXITINFO2
contains exception information. However, future versions of the GHCB
specification may define new values for SW_EXITINFO1[31:0], so really
any non-zero value should be treated as an error.

Fixes: 597cfe48212a ("x86/boot/compressed/64: Setup a GHCB-based VC Exception handler")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org> # 5.10+
Link: https://lkml.kernel.org/r/efc772af831e9e7f517f0439b13b41f56bad8784.1633063321.git.thomas.lendacky@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/Kconfig: Correct reference to MWINCHIP3D

commit 225bac2dc5d192e55f2c50123ee539b1edf8a411 upstream.

Commit in Fixes intended to exclude the Winchip series and referred to
CONFIG_WINCHIP3D, but the config symbol is called CONFIG_MWINCHIP3D.

Hence, scripts/checkkconfigsymbols.py warns:

WINCHIP3D
Referencing files: arch/x86/Kconfig

Correct the reference to the intended config symbol.

Fixes: 69b8d3fcabdc ("x86/Kconfig: Exclude i586-class CPUs lacking PAE support from the HIGHMEM64G Kconfig group")
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20210803113531.30720-4-lukas.bulwahn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/platform/olpc: Correct ifdef symbol to intended CONFIG_OLPC_XO15_SCI

commit 4758fd801f919b8b9acad78d2e49a195ec2be46b upstream.

The refactoring in the commit in Fixes introduced an ifdef
CONFIG_OLPC_XO1_5_SCI, however the config symbol is actually called
"CONFIG_OLPC_XO15_SCI".

Fortunately, ./scripts/checkkconfigsymbols.py warns:

OLPC_XO1_5_SCI
Referencing files: arch/x86/platform/olpc/olpc.c

Correct this ifdef condition to the intended config symbol.

Fixes: ec9964b48033 ("Platform: OLPC: Move EC-specific functionality out from x86")
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20210803113531.30720-3-lukas.bulwahn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pseries/eeh: Fix the kdump kernel crash during eeh_pseries_init

[ Upstream commit eb8257a12192f43ffd41bd90932c39dade958042 ]

On pseries LPAR when an empty slot is assigned to partition OR in single
LPAR mode, kdump kernel crashes during issuing PHB reset.

In the kdump scenario, we traverse all PHBs and issue reset using the
pe_config_addr of the first child device present under each PHB. However
the code assumes that none of the PHB slots can be empty and uses
list_first_entry() to get the first child device under the PHB. Since
list_first_entry() expects the list to be non-empty, it returns an
invalid pci_dn entry and ends up accessing NULL phb pointer under
pci_dn->phb causing kdump kernel crash.

This patch fixes the below kdump kernel crash by skipping empty slots:

  audit: initializing netlink subsys (disabled)
  thermal_sys: Registered thermal governor 'fair_share'
  thermal_sys: Registered thermal governor 'step_wise'
  cpuidle: using governor menu
  pstore: Registered nvram as persistent store backend
  Issue PHB reset ...
  audit: type=2000 audit(1631267818.000:1): state=initialized audit_enabled=0 res=1
  BUG: Kernel NULL pointer dereference on read at 0x00000268
  Faulting instruction address: 0xc000000008101fb0
  Oops: Kernel access of bad area, sig: 7 [#1]
  LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
  Modules linked in:
  CPU: 7 PID: 1 Comm: swapper/7 Not tainted 5.14.0 #1
  NIP:  c000000008101fb0 LR: c000000009284ccc CTR: c000000008029d70
  REGS: c00000001161b840 TRAP: 0300   Not tainted  (5.14.0)
  MSR:  8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE>  CR: 28000224  XER: 20040002
  CFAR: c000000008101f0c DAR: 0000000000000268 DSISR: 00080000 IRQMASK: 0
  ...
  NIP pseries_eeh_get_pe_config_addr+0x100/0x1b0
  LR  __machine_initcall_pseries_eeh_pseries_init+0x2cc/0x350
  Call Trace:
    0xc00000001161bb80 (unreliable)
    __machine_initcall_pseries_eeh_pseries_init+0x2cc/0x350
    do_one_initcall+0x60/0x2d0
    kernel_init_freeable+0x350/0x3f8
    kernel_init+0x3c/0x17c
    ret_from_kernel_thread+0x5c/0x64

Fixes: 5a090f7c363fd ("powerpc/pseries: PCIE PHB reset")
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
[mpe: Tweak wording and trim oops]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/163215558252.413351.8600189949820258982.stgit@jupiter
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/64s: fix program check interrupt emergency stack path

[ Upstream commit 3e607dc4df180b72a38e75030cb0f94d12808712 ]

Emergency stack path was jumping into a 3: label inside the
__GEN_COMMON_BODY macro for the normal path after it had finished,
rather than jumping over it. By a small miracle this is the correct
place to build up a new interrupt frame with the existing stack
pointer, so things basically worked okay with an added weird looking
700 trap frame on top (which had the wrong ->nip so it didn't decode
bug messages either).

Fix this by avoiding using numeric labels when jumping over non-trivial
macros.

Before:

 LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
 Modules linked in:
 CPU: 0 PID: 88 Comm: sh Not tainted 5.15.0-rc2-00034-ge057cdade6e5 #2637
 NIP:  7265677368657265 LR: c00000000006c0c8 CTR: c0000000000097f0
 REGS: c0000000fffb3a50 TRAP: 0700   Not tainted
 MSR:  9000000000021031 <SF,HV,ME,IR,DR,LE>  CR: 00000700  XER: 20040000
 CFAR: c0000000000098b0 IRQMASK: 0
 GPR00: c00000000006c964 c0000000fffb3cf0 c000000001513800 0000000000000000
 GPR04: 0000000048ab0778 0000000042000000 0000000000000000 0000000000001299
 GPR08: 000001e447c718ec 0000000022424282 0000000000002710 c00000000006bee8
 GPR12: 9000000000009033 c0000000016b0000 00000000000000b0 0000000000000001
 GPR16: 0000000000000000 0000000000000002 0000000000000000 0000000000000ff8
 GPR20: 0000000000001fff 0000000000000007 0000000000000080 00007fff89d90158
 GPR24: 0000000002000000 0000000002000000 0000000000000255 0000000000000300
 GPR28: c000000001270000 0000000042000000 0000000048ab0778 c000000080647e80
 NIP [7265677368657265] 0x7265677368657265
 LR [c00000000006c0c8] ___do_page_fault+0x3f8/0xb10
 Call Trace:
 [c0000000fffb3cf0] [c00000000000bdac] soft_nmi_common+0x13c/0x1d0 (unreliable)
 --- interrupt: 700 at decrementer_common_virt+0xb8/0x230
 NIP:  c0000000000098b8 LR: c00000000006c0c8 CTR: c0000000000097f0
 REGS: c0000000fffb3d60 TRAP: 0700   Not tainted
 MSR:  9000000000021031 <SF,HV,ME,IR,DR,LE>  CR: 22424282  XER: 20040000
 CFAR: c0000000000098b0 IRQMASK: 0
 GPR00: c00000000006c964 0000000000002400 c000000001513800 0000000000000000
 GPR04: 0000000048ab0778 0000000042000000 0000000000000000 0000000000001299
 GPR08: 000001e447c718ec 0000000022424282 0000000000002710 c00000000006bee8
 GPR12: 9000000000009033 c0000000016b0000 00000000000000b0 0000000000000001
 GPR16: 0000000000000000 0000000000000002 0000000000000000 0000000000000ff8
 GPR20: 0000000000001fff 0000000000000007 0000000000000080 00007fff89d90158
 GPR24: 0000000002000000 0000000002000000 0000000000000255 0000000000000300
 GPR28: c000000001270000 0000000042000000 0000000048ab0778 c000000080647e80
 NIP [c0000000000098b8] decrementer_common_virt+0xb8/0x230
 LR [c00000000006c0c8] ___do_page_fault+0x3f8/0xb10
 --- interrupt: 700
 Instruction dump:
 XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
 XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
 ---[ end trace 6d28218e0cc3c949 ]---

After:

 ------------[ cut here ]------------
 kernel BUG at arch/powerpc/kernel/exceptions-64s.S:491!
 Oops: Exception in kernel mode, sig: 5 [#1]
 LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
 Modules linked in:
 CPU: 0 PID: 88 Comm: login Not tainted 5.15.0-rc2-00034-ge057cdade6e5-dirty #2638
 NIP:  c0000000000098b8 LR: c00000000006bf04 CTR: c0000000000097f0
 REGS: c0000000fffb3d60 TRAP: 0700   Not tainted
 MSR:  9000000000021031 <SF,HV,ME,IR,DR,LE>  CR: 24482227  XER: 00040000
 CFAR: c0000000000098b0 IRQMASK: 0
 GPR00: c00000000006bf04 0000000000002400 c000000001513800 c000000001271868
 GPR04: 00000000100f0d29 0000000042000000 0000000000000007 0000000000000009
 GPR08: 00000000100f0d29 0000000024482227 0000000000002710 c000000000181b3c
 GPR12: 9000000000009033 c0000000016b0000 00000000100f0d29 c000000005b22f00
 GPR16: 00000000ffff0000 0000000000000001 0000000000000009 00000000100eed90
 GPR20: 00000000100eed90 0000000010000000 000000001000a49c 00000000100f1430
 GPR24: c000000001271868 0000000002000000 0000000000000215 0000000000000300
 GPR28: c000000001271800 0000000042000000 00000000100f0d29 c000000080647860
 NIP [c0000000000098b8] decrementer_common_virt+0xb8/0x230
 LR [c00000000006bf04] ___do_page_fault+0x234/0xb10
 Call Trace:
 Instruction dump:
 4182000c 39400001 48000008 894d0932 714a0001 39400008 408225fc 718a4000
 7c2a0b78 3821fcf0 41c20008 e82d0910 <0981fcf0> f92101a0 f9610170 f9810178
 ---[ end trace a5dbd1f5ea4ccc51 ]---

Fixes: 0a882e28468f4 ("powerpc/64s/exception: remove bad stack branch")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211004145642.1331214-2-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/bpf: Fix BPF_SUB when imm == 0x80000000

[ Upstream commit 5855c4c1f415ca3ba1046e77c0b3d3dfc96c9025 ]

We aren't handling subtraction involving an immediate value of
0x80000000 properly. Fix the same.

Fixes: 156d0e290e969c ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fold in fix from Naveen to use imm <= 32768]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fc4b1276eb10761fd7ce0814c8dd089da2815251.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

RISC-V: Include clone3() on rv32

[ Upstream commit 59a4e0d5511ba61353ea9a4efdb1b86c23ecf134 ]

As far as I can tell this should be enabled on rv32 as well, I'm not
sure why it's rv64-only.  checksyscalls is complaining about our lack of
clone3() on rv32.

Fixes: 56ac5e213933 ("riscv: enable sys_clone3 syscall for rv64")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, s390: Fix potential memory leak about jit_data

[ Upstream commit 686cb8b9f6b46787f035afe8fbd132a74e6b1bdd ]

Make sure to free jit_data through kfree() in the error path.

Fixes: 1c8f9b91c456 ("bpf: s390: add JIT support for multi-function programs")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv/vdso: make arch_setup_additional_pages wait for mmap_sem for write killable

[ Upstream commit 8bb0ab3ae7a4dbe6cf32deb830cf2bdbf5736867 ]

riscv architectures relying on mmap_sem for write in their
arch_setup_additional_pages. If the waiting task gets killed by the oom
killer it would block oom_reaper from asynchronous address space reclaim
and reduce the chances of timely OOM resolving.  Wait for the lock in
the killable mode and return with EINTR if the task got killed while
waiting.

Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Fixes: 76d2a0493a17 ("RISC-V: Init and Halt Code")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: mediatek: Add OFFSET_EXT_CONF setting back

[ Upstream commit 3bce7703c7ba648bd9e174dc1413f422b7998833 ]

In the commit be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust
support"), we miss setting OFFSET_EXT_CONF register if
i2c->dev_comp->timing_adjust is false, now add it back.

Fixes: be5ce0e97cc7 ("i2c: mediatek: Add i2c ac-timing adjust support")
Signed-off-by: Kewei Xu <kewei.xu@mediatek.com>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: acpi: fix resource leak in reconfiguration device addition

[ Upstream commit 6558b646ce1c2a872fe1c2c7cb116f05a2c1950f ]

acpi_i2c_find_adapter_by_handle() calls bus_find_device() which takes a
reference on the adapter which is never released which will result in a
reference count leak and render the adapter unremovable.  Make sure to
put the adapter after creating the client in the same manner that we do
for OF.

Fixes: 525e6fabeae2 ("i2c / ACPI: add support for ACPI reconfigure notifications")
Signed-off-by: Jamie Iles <quic_jiles@quicinc.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[wsa: fixed title]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/iommu: Report the correct most efficient DMA mask for PCI devices

[ Upstream commit 23c216b335d1fbd716076e8263b54a714ea3cf0e ]

According to dma-api.rst, the dma_get_required_mask() helper should return
"the mask that the platform requires to operate efficiently". Which in
the case of PPC64 means the bypass mask and not a mask from an IOMMU table
which is shorter and slower to use due to map/unmap operations (especially
expensive on "pseries").

However the existing implementation ignores the possibility of bypassing
and returns the IOMMU table mask on the pseries platform which makes some
drivers (mpt3sas is one example) choose 32bit DMA even though bypass is
supported. The powernv platform sort of handles it by having a bigger
default window with a mask >=40 but it only works as drivers choose
63/64bit if the required mask is >32 which is rather pointless.

This reintroduces the bypass capability check to let drivers make
a better choice of the DMA mask.

Fixes: f1565c24b596 ("powerpc: use the generic dma_ops_bypass mode")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210930034454.95794-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: prefer socket bound to interface when not in VRF

[ Upstream commit 8d6c414cd2fb74aa6812e9bfec6178f8246c4f3a ]

The commit 6da5b0f027a8 ("net: ensure unbound datagram socket to be
chosen when not in a VRF") modified compute_score() so that a device
match is always made, not just in the case of an l3mdev skb, then
increments the score also for unbound sockets. This ensures that
sockets bound to an l3mdev are never selected when not in a VRF.
But as unbound and bound sockets are now scored equally, this results
in the last opened socket being selected if there are matches in the
default VRF for an unbound socket and a socket bound to a dev that is
not an l3mdev. However, handling prior to this commit was to always
select the bound socket in this case. Reinstate this handling by
incrementing the score only for bound sockets. The required isolation
due to choosing between an unbound socket and a socket bound to an
l3mdev remains in place due to the device match always being made.
The same approach is taken for compute_score() for stream sockets.

Fixes: 6da5b0f027a8 ("net: ensure unbound datagram socket to be chosen when not in a VRF")
Fixes: e78190581aff ("net: ensure unbound stream socket to be chosen when not in a VRF")
Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/cf0a8523-b362-1edf-ee78-eef63cbbb428@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix freeing of uninitialized misc IRQ vector

[ Upstream commit 2e5a20573a926302b233b0c2e1077f5debc7ab2e ]

When VSI set up failed in i40e_probe() as part of PF switch set up
driver was trying to free misc IRQ vectors in
i40e_clear_interrupt_scheme and produced a kernel Oops:

   Trying to free already-free IRQ 266
   WARNING: CPU: 0 PID: 5 at kernel/irq/manage.c:1731 __free_irq+0x9a/0x300
   Workqueue: events work_for_cpu_fn
   RIP: 0010:__free_irq+0x9a/0x300
   Call Trace:
   ? synchronize_irq+0x3a/0xa0
   free_irq+0x2e/0x60
   i40e_clear_interrupt_scheme+0x53/0x190 [i40e]
   i40e_probe.part.108+0x134b/0x1a40 [i40e]
   ? kmem_cache_alloc+0x158/0x1c0
   ? acpi_ut_update_ref_count.part.1+0x8e/0x345
   ? acpi_ut_update_object_reference+0x15e/0x1e2
   ? strstr+0x21/0x70
   ? irq_get_irq_data+0xa/0x20
   ? mp_check_pin_attr+0x13/0xc0
   ? irq_get_irq_data+0xa/0x20
   ? mp_map_pin_to_irq+0xd3/0x2f0
   ? acpi_register_gsi_ioapic+0x93/0x170
   ? pci_conf1_read+0xa4/0x100
   ? pci_bus_read_config_word+0x49/0x70
   ? do_pci_enable_device+0xcc/0x100
   local_pci_probe+0x41/0x90
   work_for_cpu_fn+0x16/0x20
   process_one_work+0x1a7/0x360
   worker_thread+0x1cf/0x390
   ? create_worker+0x1a0/0x1a0
   kthread+0x112/0x130
   ? kthread_flush_work_fn+0x10/0x10
   ret_from_fork+0x1f/0x40

The problem is that at that point misc IRQ vectors
were not allocated yet and we get a call trace
that driver is trying to free already free IRQ vectors.

Add a check in i40e_clear_interrupt_scheme for __I40E_MISC_IRQ_REQUESTED
PF state before calling i40e_free_misc_vector. This state is set only if
misc IRQ vectors were properly initialized.

Fixes: c17401a1dd21 ("i40e: use separate state bit for miscellaneous IRQ setup")
Reported-by: PJ Waskiewicz <pwaskiewicz@jumptrading.com>
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: fix endless loop under rtnl

[ Upstream commit 857b6c6f665cca9828396d9743faf37fd09e9ac3 ]

The loop in i40e_get_capabilities can never end. The problem is that
although i40e_aq_discover_capabilities returns with an error if there's
a firmware problem, the returned error is not checked. There is a check for
pf->hw.aq.asq_last_status but that value is set to I40E_AQ_RC_OK on most
firmware problems.

When i40e_aq_discover_capabilities encounters a firmware problem, it will
encounter the same problem on its next invocation. As the result, the loop
becomes endless. We hit this with I40E_ERR_ADMIN_QUEUE_TIMEOUT but looking
at the code, it can happen with a range of other firmware errors.

I don't know what the correct behavior should be: whether the firmware
should be retried a few times, or whether pf->hw.aq.asq_last_status should
be always set to the encountered firmware error (but then it would be
pointless and can be just replaced by the i40e_aq_discover_capabilities
return value). However, the current behavior with an endless loop under the
rtnl mutex(!) is unacceptable and Intel has not submitted a fix, although we
explained the bug to them 7 months ago.

This may not be the best possible fix but it's better than hanging the whole
system on a firmware bug.

Fixes: 56a62fc86895 ("i40e: init code and hardware support")
Tested-by: Stefan Assmann <sassmann@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gve: report 64bit tx_bytes counter from gve_handle_report_stats()

[ Upstream commit 17c37d748f2b122a95b6d0524d410302ff89a2b1 ]

Each tx queue maintains a 64bit counter for bytes, there is
no reason to truncate this to 32bit (or this has not been
documented)

Fixes: 24aeb56f2d38 ("gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yangchun Fu <yangchun@google.com>
Cc: Kuo Zhao <kuozhao@google.com>
Cc: David Awogbemila <awogbemila@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gve: fix gve_get_stats()

[ Upstream commit 2f57d4975fa027eabd35fdf23a49f8222ef3abf2 ]

gve_get_stats() can report wrong numbers if/when u64_stats_fetch_retry()
returns true.

What is needed here is to sample values in temporary variables,
and only use them after each loop is ended.

Fixes: f5cedc84a30d ("gve: Add transmit and receive support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Catherine Sullivan <csully@google.com>
Cc: Sagi Shahar <sagis@google.com>
Cc: Jon Olson <jonolson@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Luigi Rizzo <lrizzo@google.com>
Cc: Jeroen de Borst <jeroendb@google.com>
Cc: Tao Liu <xliutaox@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtnetlink: fix if_nlmsg_stats_size() under estimation

[ Upstream commit d34367991933d28bd7331f67a759be9a8c474014 ]

rtnl_fill_statsinfo() is filling skb with one mandatory if_stats_msg structure.

nlmsg_put(skb, pid, seq, type, sizeof(struct if_stats_msg), flags);

But if_nlmsg_stats_size() never considered the needed storage.

This bug did not show up because alloc_skb(X) allocates skb with
extra tailroom, because of added alignments. This could very well
be changed in the future to have deterministic behavior.

Fixes: 10c9ead9f3c6 ("rtnetlink: add new RTM_GETSTATS message to dump link stats")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Acked-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gve: Avoid freeing NULL pointer

[ Upstream commit 922aa9bcac92b3ab6a423526a8e785b35a60b441 ]

Prevent possible crashes when cleaning up after unsuccessful
initializations.

Fixes: 893ce44df5658 ("gve: Add basic driver framework for Compute Engine Virtual NIC")
Signed-off-by: Tao Liu <xliutaox@google.com>
Signed-off-by: Catherine Sully <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gve: Correct available tx qpl check

[ Upstream commit d03477ee10f4bc35d3573cf1823814378ef2dca2 ]

The qpl_map_size is rounded up to a multiple of sizeof(long), but the
number of qpls doesn't have to be.

Fixes: f5cedc84a30d2 ("gve: Add transmit and receive support")
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/debugfs: fix file release memory leak

[ Upstream commit f5a8703a9c418c6fc54eb772712dfe7641e3991c ]

When using single_open() for opening, single_release() should be
called, otherwise the 'op' allocated in single_open() will be leaked.

Fixes: 6e9fc177399f ("drm/nouveau/debugfs: add copy of sysfs pstate interface ported to debugfs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210911075023.3969054-2-yangyingliang@huawei.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/kms/nv50-: fix file release memory leak

[ Upstream commit 0b3d4945cc7e7ea1acd52cb06dfa83bfe265b6d5 ]

When using single_open() for opening, single_release() should be
called, otherwise the 'op' allocated in single_open() will be leaked.

Fixes: 12885ecbfe62 ("drm/nouveau/kms/nvd9-: Add CRC support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210911075023.3969054-1-yangyingliang@huawei.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau: avoid a use-after-free when BO init fails

[ Upstream commit bcf34aa5082ee2343574bc3f4d1c126030913e54 ]

nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code
back to the caller. On failures, ttm_bo_init() invokes the provided
destructor which should de-initialize and free the memory.

Thus, when nouveau_bo_init() returns an error the gem object has already
been released and the memory freed by nouveau_bo_del_ttm().

Fixes: 019cbd4a4feb ("drm/nouveau: Initialize GEM object before TTM object")
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201203000220.18238-1-jcline@redhat.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: gbefb: Only instantiate device when built for IP32

[ Upstream commit 11b8e2bb986d23157e82e267fb8cc6b281dfdee9 ]

The gbefb driver not only registers a driver but also the device for that
driver. This is all well and good when run on the IP32 machines that are
supported by the driver but since the driver supports building with
COMPILE_TEST we might also be building on other platforms which do not have
this hardware and will crash instantiating the driver. Add an IS_ENABLED()
check so we compile out the device registration if we don't have the Kconfig
option for the machine enabled.

Fixes: 552ccf6b259d290c0c ("video: fbdev: gbefb: add COMPILE_TEST support")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210921212102.30803-1-broonie@kernel.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/sun4i: dw-hdmi: Fix HDMI PHY clock setup

[ Upstream commit c64c8e04a12ed3e2238761e26cda78e72550dc98 ]

Recent rework, which made HDMI PHY driver a platform device, inadvertely
reversed clock setup order. HW is very touchy about it. Proper way is to
handle controllers resets and clocks first and HDMI PHYs second.

Currently, without this fix, first mode set completely fails (nothing on
HDMI monitor) on H3 era PHYs. On H6, it still somehow work.

Move HDMI PHY reset & clocks handling to sun8i_hdmi_phy_init() which
will assure that code is executed after controllers reset & clocks are
handled. Additionally, add sun8i_hdmi_phy_deinit() which will deinit
them at controllers driver unload.

Tested on A64, H3, H6 and R40.

Fixes: 9bf3797796f5 ("drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210915175836.3158839-1-jernej.skrabec@gmail.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893

[ Upstream commit b13a270ace2e4c70653aa1d1d0394c553905802f ]

Commit 94f6345712b3 ("bus: ti-sysc: Implement quirk handling for
CLKDM_NOAUTO") should have also added the quirk for dra7 dcan1 in
addition to dcan2 for errata i893 handling.

Let's also pass the quirk flag for legacy mode booting for if "ti,hwmods"
dts property is used with related dcan hwmod data. This should be only
needed if anybody needs to git bisect earlier stable trees though.

Fixes: 94f6345712b3 ("bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTO")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf jevents: Tidy error handling

[ Upstream commit fa1b41a74d1136cbdd6960f36d7b9c7aa35c8139 ]

There is much duplication in the error handling for directory transvering
for prcessing JSONs.

Factor out the common code to tidy a bit.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-By: Kajol Jain<kjain@linux.ibm.com>
Link: https://lore.kernel.org/r/1603364547-197086-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netlink: annotate data races around nlk->bound

[ Upstream commit 7707a4d01a648e4c655101a469c956cb11273655 ]

While existing code is correct, KCSAN is reporting
a data-race in netlink_insert / netlink_sendmsg [1]

It is correct to read nlk->bound without a lock, as netlink_autobind()
will acquire all needed locks.

[1]
BUG: KCSAN: data-race in netlink_insert / netlink_sendmsg

write to 0xffff8881031c8b30 of 1 bytes by task 18752 on cpu 0:
 netlink_insert+0x5cc/0x7f0 net/netlink/af_netlink.c:597
 netlink_autobind+0xa9/0x150 net/netlink/af_netlink.c:842
 netlink_sendmsg+0x479/0x7c0 net/netlink/af_netlink.c:1892
 sock_sendmsg_nosec net/socket.c:703 [inline]
 sock_sendmsg net/socket.c:723 [inline]
 ____sys_sendmsg+0x360/0x4d0 net/socket.c:2392
 ___sys_sendmsg net/socket.c:2446 [inline]
 __sys_sendmsg+0x1ed/0x270 net/socket.c:2475
 __do_sys_sendmsg net/socket.c:2484 [inline]
 __se_sys_sendmsg net/socket.c:2482 [inline]
 __x64_sys_sendmsg+0x42/0x50 net/socket.c:2482
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff8881031c8b30 of 1 bytes by task 18751 on cpu 1:
 netlink_sendmsg+0x270/0x7c0 net/netlink/af_netlink.c:1891
 sock_sendmsg_nosec net/socket.c:703 [inline]
 sock_sendmsg net/socket.c:723 [inline]
 __sys_sendto+0x2a8/0x370 net/socket.c:2019
 __do_sys_sendto net/socket.c:2031 [inline]
 __se_sys_sendto net/socket.c:2027 [inline]
 __x64_sys_sendto+0x74/0x90 net/socket.c:2027
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x00 -> 0x01

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 18751 Comm: syz-executor.0 Not tainted 5.14.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: da314c9923fe ("netlink: Replace rhash_portid with bound")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sfp: Fix typo in state machine debug string

[ Upstream commit 25a9da6641f1f66006e93ddbefee13a437efa8c0 ]

The string should be "tx_disable" to match the state enum.

Fixes: 4005a7cb4f55 ("net: phy: sftp: print debug message with text, not numbers")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: sch_taprio: properly cancel timer from taprio_destroy()

[ Upstream commit a56d447f196fa9973c568f54c0d76d5391c3b0c0 ]

There is a comment in qdisc_create() about us not calling ops->reset()
in some cases.

err_out4:
/*
 * Any broken qdiscs that would require a ops->reset() here?
 * The qdisc was never in action so it shouldn't be necessary.
 */

As taprio sets a timer before actually receiving a packet, we need
to cancel it from ops->destroy, just in case ops->reset has not
been called.

syzbot reported:

ODEBUG: free active (active state 0) object type: hrtimer hint: advance_sched+0x0/0x9a0 arch/x86/include/asm/atomic64_64.h:22
WARNING: CPU: 0 PID: 8441 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505
Modules linked in:
CPU: 0 PID: 8441 Comm: syz-executor813 Not tainted 5.14.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505
Code: ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 af 00 00 00 48 8b 14 dd e0 d3 e3 89 4c 89 ee 48 c7 c7 e0 c7 e3 89 e8 5b 86 11 05 <0f> 0b 83 05 85 03 92 09 01 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e c3
RSP: 0018:ffffc9000130f330 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
RDX: ffff88802baeb880 RSI: ffffffff815d87b5 RDI: fffff52000261e58
RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815d25ee R11: 0000000000000000 R12: ffffffff898dd020
R13: ffffffff89e3ce20 R14: ffffffff81653630 R15: dffffc0000000000
FS:  0000000000f0d300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffb64b3e000 CR3: 0000000036557000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 __debug_check_no_obj_freed lib/debugobjects.c:987 [inline]
 debug_check_no_obj_freed+0x301/0x420 lib/debugobjects.c:1018
 slab_free_hook mm/slub.c:1603 [inline]
 slab_free_freelist_hook+0x171/0x240 mm/slub.c:1653
 slab_free mm/slub.c:3213 [inline]
 kfree+0xe4/0x540 mm/slub.c:4267
 qdisc_create+0xbcf/0x1320 net/sched/sch_api.c:1299
 tc_modify_qdisc+0x4c8/0x1a60 net/sched/sch_api.c:1663
 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5571
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:724
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2403
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2457
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2486
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80

Fixes: 44d4775ca518 ("net/sched: sch_taprio: reset child qdiscs before freeing them")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Davide Caratti <dcaratti@redhat.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bridge: fix under estimation in br_get_linkxstats_size()

[ Upstream commit 0854a0513321cf70bea5fa483ebcaa983cc7c62e ]

Commit de1799667b00 ("net: bridge: add STP xstats")
added an additional nla_reserve_64bit() in br_fill_linkxstats(),
but forgot to update br_get_linkxstats_size() accordingly.

This can trigger the following in rtnl_stats_get()

WARN_ON(err == -EMSGSIZE);

Fixes: de1799667b00 ("net: bridge: add STP xstats")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Nikolay Aleksandrov <nikolay@nvidia.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bridge: use nla_total_size_64bit() in br_get_linkxstats_size()

[ Upstream commit dbe0b88064494b7bb6a9b2aa7e085b14a3112d44 ]

bridge_fill_linkxstats() is using nla_reserve_64bit().

We must use nla_total_size_64bit() instead of nla_total_size()
for corresponding data structure.

Fixes: 1080ab95e3c7 ("net: bridge: add support for IGMP/MLD stats and export them via netlink")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Nikolay Aleksandrov <nikolay@nvidia.com>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence

[ Upstream commit 783f3db030563f7bcdfe2d26428af98ea1699a8e ]

Any pending interrupt can prevent entering standby based power off state.
To avoid it, disable the GIC CPU interface.

Fixes: 8148d2136002 ("ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: drm/bridge: ti-sn65dsi86: Fix reg value

[ Upstream commit b2d70c0dbf2731a37d1c7bcc86ab2387954d5f56 ]

make dtbs_check:

    arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dt.yaml: bridge@2c: reg:0:0: 45 was expected

According to the datasheet, the I2C address can be either 0x2c or 0x2d,
depending on the ADDR control input.

Fixes: e3896e6dddf0b821 ("dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://lore.kernel.org/r/08f73c2aa0d4e580303357dfae107d084d962835.1632486753.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ls1028a: add missing CAN nodes

[ Upstream commit 04fa4f03e3533f51b4db19cb487435f5862a0514 ]

The LS1028A has two FlexCAN controller. These are compatible with
the ones from the LX2160A. Add the nodes.

The first controller was tested on the Kontron sl28 board.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ptp_pch: Load module automatically if ID matches

[ Upstream commit 7cd8b1542a7ba0720c5a0a85ed414a122015228b ]

The driver can't be loaded automatically because it misses
module alias to be provided. Add corresponding MODULE_DEVICE_TABLE()
call to the driver.

Fixes: 863d08ece9bf ("supports eg20t ptp clock")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/fsl/dts: Fix phy-connection-type for fm1mac3

[ Upstream commit eed183abc0d3b8adb64fd1363b7cea7986cd58d6 ]

Property phy-connection-type contains invalid value "sgmii-2500" per scheme
defined in file ethernet-controller.yaml.

Correct phy-connection-type value should be "2500base-x".

Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 84e0f1c13806 ("powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s)")
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net_sched: fix NULL deref in fifo_set_limit()

[ Upstream commit 560ee196fe9e5037e5015e2cdb14b3aecb1cd7dc ]

syzbot reported another NULL deref in fifo_set_limit() [1]

I could repro the issue with :

unshare -n
tc qd add dev lo root handle 1:0 tbf limit 200000 burst 70000 rate 100Mbit
tc qd replace dev lo parent 1:0 pfifo_fast
tc qd change dev lo root handle 1:0 tbf limit 300000 burst 70000 rate 100Mbit

pfifo_fast does not have a change() operation.
Make fifo_set_limit() more robust about this.

[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 1cf99067 P4D 1cf99067 PUD 7ca49067 PMD 0
Oops: 0010 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 14443 Comm: syz-executor959 Not tainted 5.15.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:0x0
Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
RSP: 0018:ffffc9000e2f7310 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffffffff8d6ecc00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff888024c27910 RDI: ffff888071e34000
RBP: ffff888071e34000 R08: 0000000000000001 R09: ffffffff8fcfb947
R10: 0000000000000001 R11: 0000000000000000 R12: ffff888024c27910
R13: ffff888071e34018 R14: 0000000000000000 R15: ffff88801ef74800
FS:  00007f321d897700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 00000000722c3000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 fifo_set_limit net/sched/sch_fifo.c:242 [inline]
 fifo_set_limit+0x198/0x210 net/sched/sch_fifo.c:227
 tbf_change+0x6ec/0x16d0 net/sched/sch_tbf.c:418
 qdisc_change net/sched/sch_api.c:1332 [inline]
 tc_modify_qdisc+0xd9a/0x1a60 net/sched/sch_api.c:1634
 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5572
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:724
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: fb0305ce1b03 ("net-sched: consolidate default fifo qdisc setup")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20210930212239.3430364-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: mdio: fix memory leak

[ Upstream commit ca6e11c337daf7925ff8a2aac8e84490a8691905 ]

Syzbot reported memory leak in MDIO bus interface, the problem was in
wrong state logic.

MDIOBUS_ALLOCATED indicates 2 states:
1. Bus is only allocated
2. Bus allocated and __mdiobus_register() fails, but
   device_register() was called

In case of device_register() has been called we should call put_device()
to correctly free the memory allocated for this device, but mdiobus_free()
calls just kfree(dev) in case of MDIOBUS_ALLOCATED state

To avoid this behaviour we need to set bus->state to MDIOBUS_UNREGISTERED
_before_ calling device_register(), because put_device() should be
called even in case of device_register() failure.

Link: https://lore.kernel.org/netdev/YVMRWNDZDUOvQjHL@shell.armlinux.org.uk/
Fixes: 46abc02175b3 ("phylib: give mdio buses a device tree presence")
Reported-and-tested-by: syzbot+398e7dc692ddbbb4cfec@syzkaller.appspotmail.com
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/eceae1429fbf8fa5c73dd2a0d39d525aa905074d.1633024062.git.paskripkin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: E-Switch, Fix double allocation of acl flow counter

[ Upstream commit a586775f83bd729ad60b56352dbe067f4bb0beee ]

Flow counter is allocated in eswitch legacy acl setting functions
without checking if already allocated by previous setting. Add a check
to avoid such double allocation.

Fixes: 07bab9502641 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes")
Fixes: ea651a86d468 ("net/mlx5: E-Switch, Refactor eswitch egress acl codes")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: IPSEC RX, enable checksum complete

[ Upstream commit f9a10440f0b1f33faa792af26f4e9823a9b8b6a4 ]

Currently in Rx data path IPsec crypto offloaded packets uses
csum_none flag, so checksum is handled by the stack, this naturally
have some performance/cpu utilization impact on such flows. As Nvidia
NIC starting from ConnectX6DX provides checksum complete value out of
the box also for such flows there is no sense in taking csum_none path,
furthermore the stack (xfrm) have the method to handle checksum complete
corrections for such flows i.e. IPsec trailer removal and consequently
checksum value adjustment.

Because of the above and in addition the ConnectX6DX is the first HW
which supports IPsec crypto offload then it is safe to report csum
complete for IPsec offloaded traffic.

Fixes: b2ac7541e377 ("net/mlx5e: IPsec: Add Connect-X IPsec Rx data path offload")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix integer overflow in prealloc_elems_and_freelist()

[ Upstream commit 30e29a9a2bc6a4888335a6ede968b75cd329657a ]

In prealloc_elems_and_freelist(), the multiplication to calculate the
size passed to bpf_map_area_alloc() could lead to an integer overflow.
As a result, out-of-bounds write could occur in pcpu_freelist_populate()
as reported by KASAN:

[...]
[   16.968613] BUG: KASAN: slab-out-of-bounds in pcpu_freelist_populate+0xd9/0x100
[   16.969408] Write of size 8 at addr ffff888104fc6ea0 by task crash/78
[   16.970038]
[   16.970195] CPU: 0 PID: 78 Comm: crash Not tainted 5.15.0-rc2+ #1
[   16.970878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[   16.972026] Call Trace:
[   16.972306]  dump_stack_lvl+0x34/0x44
[   16.972687]  print_address_description.constprop.0+0x21/0x140
[   16.973297]  ? pcpu_freelist_populate+0xd9/0x100
[   16.973777]  ? pcpu_freelist_populate+0xd9/0x100
[   16.974257]  kasan_report.cold+0x7f/0x11b
[   16.974681]  ? pcpu_freelist_populate+0xd9/0x100
[   16.975190]  pcpu_freelist_populate+0xd9/0x100
[   16.975669]  stack_map_alloc+0x209/0x2a0
[   16.976106]  __sys_bpf+0xd83/0x2ce0
[...]

The possibility of this overflow was originally discussed in [0], but
was overlooked.

Fix the integer overflow by changing elem_size to u64 from u32.

  [0] https://lore.kernel.org/bpf/728b238e-a481-eb50-98e9-b0f430ab01e7@gmail.com/

Fixes: 557c0c6e7df8 ("bpf: convert stackmap to pre-allocation")
Signed-off-by: Tatsuhiko Yasumatsu <th.yasumatsu@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210930135545.173698-1-th.yasumatsu@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: ti: omap-prm: Fix external abort for am335x pruss

[ Upstream commit b232537074fcaf0c2837abbb217429c097bb7598 ]

Starting with v5.15-rc1, we may now see some am335x beaglebone black
device produce the following error on pruss probe:

Unhandled fault: external abort on non-linefetch (0x1008) at 0xe0326000

This has started with the enabling of pruss for am335x in the dts files.

Turns out the is caused by the PRM reset handling not waiting for the
reset bit to clear. To fix the issue, let's always wait for the reset
bit to clear, even if there is a separate reset status register.

We attempted to fix a similar issue for dra7 iva with a udelay() in
commit effe89e40037 ("soc: ti: omap-prm: Fix occasional abort on reset
deassert for dra7 iva"). There is no longer a need for the udelay()
for dra7 iva reset either with the check added for reset bit clearing.

Cc: Drew Fustini <pdp7pdp7@gmail.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: "H. Nikolaus Schaller" <hns@goldelico.com>
Cc: Robert Nelson <robertcnelson@gmail.com>
Cc: Yongqin Liu <yongqin.liu@linaro.org>
Fixes: effe89e40037 ("soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva")
Reported-by: Matti Vaittinen <mazziesaccount@gmail.com>
Tested-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, arm: Fix register clobbering in div/mod implementation

[ Upstream commit 79e3445b38e0cab94264a3894c0c3d57c930b97e ]

On ARM CPUs that lack div/mod instructions, ALU32 BPF_DIV and BPF_MOD are
implemented using a call to a helper function. Before, the emitted code
for those function calls failed to preserve caller-saved ARM registers.
Since some of those registers happen to be mapped to BPF registers, it
resulted in eBPF register values being overwritten.

This patch emits code to push and pop the remaining caller-saved ARM
registers r2-r3 into the stack during the div/mod function call. ARM
registers r0-r1 are used as arguments and return value, and those were
already saved and restored correctly.

Fixes: 39c13c204bb1 ("arm: eBPF JIT compiler")
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pcie: add configuration of a Wi-Fi adapter on Dell XPS 15

[ Upstream commit fe5c735d0d47b495be6753d6aea4f8f78c909a0a ]

There is a Killer AX1650 2x2 Wi-Fi 6 and Bluetooth 5.1 wireless adapter
found on Dell XPS 15 (9510) laptop, its configuration was present on
Linux v5.7, however accidentally it has been removed from the list of
supported devices, let's add it back.

The problem is manifested on driver initialization:

  Intel(R) Wireless WiFi driver for Linux
  iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
  iwlwifi: No config found for PCI dev 43f0/1651, rev=0x354, rfid=0x10a100
  iwlwifi: probe of 0000:00:14.3 failed with error -22

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213939
Fixes: 3f910a25839b ("iwlwifi: pcie: convert all AX101 devices to the device tables")
Cc: Julien Wajsberg <felash@gmail.com>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Acked-by: Luca Coelho <luca@coelho.fi>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210924122154.2376577-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

xtensa: call irqchip_init only when CONFIG_USE_OF is selected

[ Upstream commit 6489f8d0e1d93a3603d8dad8125797559e4cf2a2 ]

During boot time kernel configured with OF=y but USE_OF=n displays the
following warnings and hangs shortly after starting userspace:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:695 irq_create_mapping_affinity+0x29/0xc0
irq_create_mapping_affinity(, 6) called with NULL domain
CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc3-00001-gd67ed2510d28 #30
Call Trace:
  __warn+0x69/0xc4
  warn_slowpath_fmt+0x6c/0x94
  irq_create_mapping_affinity+0x29/0xc0
  local_timer_setup+0x40/0x88
  time_init+0xb1/0xe8
  start_kernel+0x31d/0x3f4
  _startup+0x13b/0x13b
---[ end trace 1e6630e1c5eda35b ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/xtensa/kernel/time.c:141 local_timer_setup+0x58/0x88
error: can't map timer irq
CPU: 0 PID: 0 Comm: swapper Tainted: G        W         5.15.0-rc3-00001-gd67ed2510d28 #30
Call Trace:
  __warn+0x69/0xc4
  warn_slowpath_fmt+0x6c/0x94
  local_timer_setup+0x58/0x88
  time_init+0xb1/0xe8
  start_kernel+0x31d/0x3f4
  _startup+0x13b/0x13b
---[ end trace 1e6630e1c5eda35c ]---
Failed to request irq 0 (timer)

Fix that by calling irqchip_init only when CONFIG_USE_OF is selected and
calling legacy interrupt controller init otherwise.

Fixes: da844a81779e ("xtensa: add device trees support")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>