tracepoints: Update static_call before tp_funcs when adding a tracepoint

commit 352384d5c84ebe40fa77098cc234fe173247d8ef upstream.

Because of the significant overhead that retpolines pose on indirect
calls, the tracepoint code was updated to use the new "static_calls" that
can modify the running code to directly call a function instead of using
an indirect caller, and this function can be changed at runtime.

In the tracepoint code that calls all the registered callbacks that are
attached to a tracepoint, the following is done:

it_func_ptr = rcu_dereference_raw((&__tracepoint_##name)->funcs);
if (it_func_ptr) {
__data = (it_func_ptr)->data;
static_call(tp_func_##name)(__data, args);
}

If there's just a single callback, the static_call is updated to just call
that callback directly. Once another handler is added, then the static
caller is updated to call the iterator, that simply loops over all the
funcs in the array and calls each of the callbacks like the old method
using indirect calling.

The issue was discovered with a race between updating the funcs array and
updating the static_call. The funcs array was updated first and then the
static_call was updated. This is not an issue as long as the first element
in the old array is the same as the first element in the new array. But
that assumption is incorrect, because callbacks also have a priority
field, and if there's a callback added that has a higher priority than the
callback on the old array, then it will become the first callback in the
new array. This means that it is possible to call the old callback with
the new callback data element, which can cause a kernel panic.

static_call = callback1()
funcs[] = {callback1,data1};
callback2 has higher priority than callback1

CPU 1 CPU 2
----- -----

   new_funcs = {callback2,data2},
               {callback1,data1}

   rcu_assign_pointer(tp->funcs, new_funcs);

  /*
   * Now tp->funcs has the new array
   * but the static_call still calls callback1
   */

it_func_ptr = tp->funcs [ new_funcs ]
data = it_func_ptr->data [ data2 ]
static_call(callback1, data);

/* Now callback1 is called with
 * callback2's data */

[ KERNEL PANIC ]

   update_static_call(iterator);

To prevent this from happening, always switch the static_call to the
iterator before assigning the tp->funcs to the new array. The iterator will
always properly match the callback with its data.

To trigger this bug:

  In one terminal:

    while :; do hackbench 50; done

  In another terminal

    echo 1 > /sys/kernel/tracing/events/sched/sched_waking/enable
    while :; do
        echo 1 > /sys/kernel/tracing/set_event_pid;
        sleep 0.5
        echo 0 > /sys/kernel/tracing/set_event_pid;
        sleep 0.5
   done

And it doesn't take long to crash. This is because the set_event_pid adds
a callback to the sched_waking tracepoint with a high priority, which will
be called before the sched_waking trace event callback is called.

Note, the removal to a single callback updates the array first, before
changing the static_call to single callback, which is the proper order as
the first element in the array is the same as what the static_call is
being changed to.

Link: https://lore.kernel.org/io-uring/4ebea8f0-58c9-e571-fd30-0ce4f6f09c70@samba.org/
Cc: stable@vger.kernel.org
Fixes: d25e37d89dd2f ("tracepoint: Optimize using static_call()")
Reported-by: Stefan Metzmacher <metze@samba.org>
tested-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware/efi: Tell memblock about EFI iomem reservations

commit 2bab693a608bdf614b9fcd44083c5100f34b9f77 upstream.

kexec_load_file() relies on the memblock infrastructure to avoid
stamping over regions of memory that are essential to the survival
of the system.

However, nobody seems to agree how to flag these regions as reserved,
and (for example) EFI only publishes its reservations in /proc/iomem
for the benefit of the traditional, userspace based kexec tool.

On arm64 platforms with GICv3, this can result in the payload being
placed at the location of the LPI tables. Shock, horror!

Let's augment the EFI reservation code with a memblock_reserve() call,
protecting our dear tables from the secondary kernel invasion.

Reported-by: Moritz Fischer <mdf@kernel.org>
Tested-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: stusb160x: register role switch before interrupt registration

commit 86762ad4abcc549deb7a155c8e5e961b9755bcf0 upstream.

During interrupt registration, attach state is checked. If attached,
then the Type-C state is updated with typec_set_xxx functions and role
switch is set with usb_role_switch_set_role().

If the usb_role_switch parameter is error or null, the function simply
returns 0.

So, to update usb_role_switch role if a device is attached before the
irq is registered, usb_role_switch must be registered before irq
registration.

Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20210716120718.20398-2-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: gadget: Fix sending zero length packet in DDMA mode.

commit d53dc38857f6dbefabd9eecfcbf67b6eac9a1ef4 upstream.

Sending zero length packet in DDMA mode perform by DMA descriptor
by setting SP (short packet) flag.

For DDMA in function dwc2_hsotg_complete_in() does not need to send
zlp.

Tested by USBCV MSC tests.

Fixes: f71b5e2533de ("usb: dwc2: gadget: fix zero length packet transfers")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/967bad78c55dd2db1c19714eee3d0a17cf99d74a.1626777738.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: gadget: Fix GOUTNAK flow for Slave mode.

commit fecb3a171db425e5068b27231f8efe154bf72637 upstream.

Because of dwc2_hsotg_ep_stop_xfr() function uses poll
mode, first need to mask GINTSTS_GOUTNAKEFF interrupt.
In Slave mode GINTSTS_GOUTNAKEFF interrupt will be
aserted only after pop OUT NAK status packet from RxFIFO.

In dwc2_hsotg_ep_sethalt() function before setting
DCTL_SGOUTNAK need to unmask GOUTNAKEFF interrupt.

Tested by USBCV CH9 and MSC tests set in Slave, BDMA and DDMA.
All tests are passed.

Fixes: a4f827714539a ("usb: dwc2: gadget: Disable enabled HW endpoint in dwc2_hsotg_ep_disable")
Fixes: 6070636c4918c ("usb: dwc2: Fix Stalling a Non-Isochronous OUT EP")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/e17fad802bbcaf879e1ed6745030993abb93baf8.1626152924.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: Fix Unbalanced pm_runtime_enable in tegra_xudc_probe

commit 5b01248156bd75303e66985c351dee648c149979 upstream.

Add missing pm_runtime_disable() when probe error out. It could
avoid pm_runtime implementation complains when removing and probing
again the driver.

Fixes: 49db427232fe ("usb: gadget: Add UDC driver for tegra XUSB device mode controller")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20210618141441.107817-1-zhangqilong3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick

commit d6a206e60124a9759dd7f6dfb86b0e1d3b1df82e upstream.

Add the USB serial device ID for the CEL ZigBee EM3588 radio stick.

Signed-off-by: John Keeping <john@metanate.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: fix comments for GE CS1000

commit e9db418d4b828dd049caaf5ed65dc86f93bb1a0c upstream.

Fix comments for GE CS1000 CP210x USB ID assignments.

Fixes: 42213a0190b5 ("USB: serial: cp210x: add some more GE USB IDs")
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add support for u-blox LARA-R6 family

commit 94b619a07655805a1622484967754f5848640456 upstream.

The patch is meant to support LARA-R6 Cat 1 module family.

Module USB ID:
Vendor  ID: 0x05c6
Product ID: 0x90fA

Interface layout:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: QMI wwan (not available in all versions)

Signed-off-by: Marco De Marco <marco.demarco@posteo.net>
Link: https://lore.kernel.org/r/49260184.kfMIbaSn9k@mars
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop()

commit 5719df243e118fb343725e8b2afb1637e1af1373 upstream.

This driver has a potential issue which this driver is possible to
cause superfluous irqs after usb_pkt_pop() is called. So, after
the commit 3af32605289e ("usb: renesas_usbhs: fix error return
code of usbhsf_pkt_handler()") had been applied, we could observe
the following error happened when we used g_audio.

    renesas_usbhs e6590000.usb: irq_ready run_error 1 : -22

To fix the issue, disable the tx or rx interrupt in usb_pkt_pop().

Fixes: 2743e7f90dc0 ("usb: renesas_usbhs: fix the usb_pkt_pop()")
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210624122039.596528-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: max-3421: Prevent corruption of freed memory

commit b5fdf5c6e6bee35837e160c00ac89327bdad031b upstream.

The MAX-3421 USB driver remembers the state of the USB toggles for a
device/endpoint. To save SPI writes, this was only done when a new
device/endpoint was being used. Unfortunately, if the old device was
removed, this would cause writes to freed memory.

To fix this, a simpler scheme is used. The toggles are read from
hardware when a URB is completed, and the toggles are always written to
hardware when any URB transaction is started. This will cause a few more
SPI transactions, but no causes kernel panics.

Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20210625031456.8632-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS

commit 6abf2fe6b4bf6e5256b80c5817908151d2d33e9f upstream.

LaCie Rugged USB3-FW appears to be incompatible with UAS. It generates
errors like:
[ 1151.582598] sd 14:0:0:0: tag#16 uas_eh_abort_handler 0 uas-tag 1 inflight: IN
[ 1151.582602] sd 14:0:0:0: tag#16 CDB: Report supported operation codes a3 0c 01 12 00 00 00 00 02 00 00 00
[ 1151.588594] scsi host14: uas_eh_device_reset_handler start
[ 1151.710482] usb 2-4: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 1151.741398] scsi host14: uas_eh_device_reset_handler success
[ 1181.785534] scsi host14: uas_eh_device_reset_handler start

Signed-off-by: Julian Sikorski <belegdol+github@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210720171910.36497-1-belegdol+github@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: hub: Fix link power management max exit latency (MEL) calculations

commit 1bf2761c837571a66ec290fb66c90413821ffda2 upstream.

Maximum Exit Latency (MEL) value is used by host to know how much in
advance it needs to start waking up a U1/U2 suspended link in order to
service a periodic transfer in time.

Current MEL calculation only includes the time to wake up the path from
U1/U2 to U0. This is called tMEL1 in USB 3.1 section C 1.5.2

Total MEL = tMEL1 + tMEL2 +tMEL3 + tMEL4 which should additinally include:
- tMEL2 which is the time it takes for PING message to reach device
- tMEL3 time for device to process the PING and submit a PING_RESPONSE
- tMEL4 time for PING_RESPONSE to traverse back upstream to host.

Add the missing tMEL2, tMEL3 and tMEL4 to MEL calculation.

Cc: <stable@kernel.org> # v3.5
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210715150122.1995966-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: hub: Disable USB 3 device initiated lpm if exit latency is too high

commit 1b7f56fbc7a1b66967b6114d1b5f5a257c3abae6 upstream.

The device initiated link power management U1/U2 states should not be
enabled in case the system exit latency plus one bus interval (125us) is
greater than the shortest service interval of any periodic endpoint.

This is the case for both U1 and U2 sytstem exit latencies and link states.

See USB 3.2 section 9.4.9 "Set Feature" for more details

Note, before this patch the host and device initiated U1/U2 lpm states
were both enabled with lpm. After this patch it's possible to end up with
only host inititated U1/U2 lpm in case the exit latencies won't allow
device initiated lpm.

If this case we still want to set the udev->usb3_lpm_ux_enabled flag so
that sysfs users can see the link may go to U1/U2.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210715150122.1995966-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3S HV Nested: Sanitise H_ENTER_NESTED TM state

commit d9c57d3ed52a92536f5fa59dc5ccdd58b4875076 upstream.

The H_ENTER_NESTED hypercall is handled by the L0, and it is a request
by the L1 to switch the context of the vCPU over to that of its L2
guest, and return with an interrupt indication. The L1 is responsible
for switching some registers to guest context, and the L0 switches
others (including all the hypervisor privileged state).

If the L2 MSR has TM active, then the L1 is responsible for
recheckpointing the L2 TM state. Then the L1 exits to L0 via the
H_ENTER_NESTED hcall, and the L0 saves the TM state as part of the exit,
and then it recheckpoints the TM state as part of the nested entry and
finally HRFIDs into the L2 with TM active MSR. Not efficient, but about
the simplest approach for something that's horrendously complicated.

Problems arise if the L1 exits to the L0 with a TM state which does not
match the L2 TM state being requested. For example if the L1 is
transactional but the L2 MSR is non-transactional, or vice versa. The
L0's HRFID can take a TM Bad Thing interrupt and crash.

Fix this by disallowing H_ENTER_NESTED in TM[T] state entirely, and then
ensuring that if the L1 is suspended then the L2 must have TM active,
and if the L1 is not suspended then the L2 must not have TM active.

Fixes: 360cae313702 ("KVM: PPC: Book3S HV: Nested guest entry via hypercall")
Cc: stable@vger.kernel.org # v4.20+
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow

commit f62f3c20647ebd5fb6ecb8f0b477b9281c44c10a upstream.

The kvmppc_rtas_hcall() sets the host rtas_args.rets pointer based on
the rtas_args.nargs that was provided by the guest. That guest nargs
value is not range checked, so the guest can cause the host rets pointer
to be pointed outside the args array. The individual rtas function
handlers check the nargs and nrets values to ensure they are correct,
but if they are not, the handlers store a -3 (0xfffffffd) failure
indication in rets[0] which corrupts host memory.

Fix this by testing up front whether the guest supplied nargs and nret
would exceed the array size, and fail the hcall directly without storing
a failure indication to rets[0].

Also expand on a comment about why we kill the guest and try not to
return errors directly if we have a valid rets[0] pointer.

Fixes: 8e591cb72047 ("KVM: PPC: Book3S: Add infrastructure to implement kernel-side RTAS calls")
Cc: stable@vger.kernel.org # v3.10+
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Fix lost USB 2 remote wake

commit 72f68bf5c756f5ce1139b31daae2684501383ad5 upstream.

There's a small window where a USB 2 remote wake may be left unhandled
due to a race between hub thread and xhci port event interrupt handler.

When the resume event is detected in the xhci interrupt handler it kicks
the hub timer, which should move the port from resume to U0 once resume
has been signalled for long enough.

To keep the hub "thread" running we set a bus_state->resuming_ports flag.
This flag makes sure hub timer function kicks itself.

checking this flag was not properly protected by the spinlock. Flag was
copied to a local variable before lock was taken. The local variable was
then checked later with spinlock held.

If interrupt is handled right after copying the flag to the local variable
we end up stopping the hub thread before it can handle the USB 2 resume.

CPU0 CPU1
(hub thread) (xhci event handler)

xhci_hub_status_data()
status = bus_state->resuming_ports;
<Interrupt>
handle_port_status()
spin_lock()
bus_state->resuming_ports = 1
set_flag(HCD_FLAG_POLL_RH)
spin_unlock()
spin_lock()
if (!status)
  clear_flag(HCD_FLAG_POLL_RH)
spin_unlock()

Fix this by taking the lock a bit earlier so that it covers
the resuming_ports flag copy in the hub thread

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210715150651.1996099-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: avoid renesas_usb_fw.mem when it's unusable

commit 0665e387318607d8269bfdea60723c627c8bae43 upstream.

Commit a66d21d7dba8 ("usb: xhci: Add support for Renesas controller with
memory") added renesas_usb_fw.mem firmware reference to xhci-pci.  Thus
modinfo indicates xhci-pci.ko has "firmware: renesas_usb_fw.mem".  But
the firmware is only actually used with CONFIG_USB_XHCI_PCI_RENESAS.  An
unusable firmware reference can trigger safety checkers which look for
drivers with unmet firmware dependencies.

Avoid referring to renesas_usb_fw.mem in circumstances when it cannot be
loaded (when CONFIG_USB_XHCI_PCI_RENESAS isn't set).

Fixes: a66d21d7dba8 ("usb: xhci: Add support for Renesas controller with memory")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Thelen <gthelen@google.com>
Link: https://lore.kernel.org/r/20210702071224.3673568-1-gthelen@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: renesas-xhci: Fix handling of unknown ROM state"

commit 44cf53602f5a0db80d53c8fff6cdbcae59650a42 upstream.

This reverts commit d143825baf15f204dac60acdf95e428182aa3374.

Justin reports some of his systems now fail as result of this commit:

 xhci_hcd 0000:04:00.0: Direct firmware load for renesas_usb_fw.mem failed with error -2
 xhci_hcd 0000:04:00.0: request_firmware failed: -2
 xhci_hcd: probe of 0000:04:00.0 failed with error -2

The revert brings back the original issue the commit tried to solve but
at least unbreaks existing systems relying on previous behavior.

Cc: stable@vger.kernel.org
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Justin Forbes <jmforbes@linuxtx.org>
Reported-by: Justin Forbes <jmforbes@linuxtx.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Fixes: d143825baf15 ("usb: renesas-xhci: Fix handling of unknown ROM state")
Link: https://lore.kernel.org/r/20210719070519.41114-1-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Fix mmap capability check

commit c4824ae7db418aee6f50f308a20b832e58e997fd upstream.

The hw_support_mmap() doesn't cover all memory allocation types and
might use a wrong device pointer for checking the capability.
Check the all memory allocation types more completely.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210720092640.12338-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Call substream ack() method upon compat mmap commit

commit 2e2832562c877e6530b8480982d99a4ff90c6777 upstream.

If a 32-bit application is being used with a 64-bit kernel and is using
the mmap mechanism to write data, then the SNDRV_PCM_IOCTL_SYNC_PTR
ioctl results in calling snd_pcm_ioctl_sync_ptr_compat(). Make this use
pcm_lib_apply_appl_ptr() so that the substream's ack() method, if
defined, is called.

The snd_pcm_sync_ptr() function, used in the 64-bit ioctl case, already
uses snd_pcm_ioctl_sync_ptr_compat().

Fixes: 9027c4639ef1 ("ALSA: pcm: Call ack() whenever appl_ptr is updated")
Signed-off-by: Alan Young <consult.awy@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/c441f18c-eb2a-3bdd-299a-696ccca2de9c@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hdmi: Expose all pins on MSI MS-7C94 board

commit 33f735f137c6539e3ceceb515cd1e2a644005b49 upstream.

The BIOS on MSI Mortar B550m WiFi (MS-7C94) board with AMDGPU seems
disabling the other pins than HDMI although it has more outputs
including DP.

This patch adds the board to the allow list for enabling all pins.

Reported-by: Damjan Georgievski <gdamjan@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAEk1YH4Jd0a8vfZxORVu7qg+Zsc-K+pR187ezNq8QhJBPW4gpw@mail.gmail.com
Link: https://lore.kernel.org/r/20210716135600.24176-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Fix pop noise and 2 Front Mic issues on a machine

commit e4efa82660e6d80338c554e45e903714e1b2c27b upstream.

This is a Lenovo ThinkStation machine which uses the codec alc623.
There are 2 issues on this machine, the 1st one is the pop noise in
the lineout, the 2nd one is there are 2 Front Mics and pulseaudio
can't handle them, After applying the fixup of
ALC623_FIXUP_LENOVO_THINKSTATION_P340 to this machine, the 2 issues
are fixed.

Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210719030231.6870-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: sb: Fix potential ABBA deadlock in CSP driver

commit 1c2b9519159b470ef24b2638f4794e86e2952ab7 upstream.

SB16 CSP driver may hit potentially a typical ABBA deadlock in two
code paths:

 In snd_sb_csp_stop():
     spin_lock_irqsave(&p->chip->mixer_lock, flags);
     spin_lock(&p->chip->reg_lock);

 In snd_sb_csp_load():
     spin_lock_irqsave(&p->chip->reg_lock, flags);
     spin_lock(&p->chip->mixer_lock);

Also the similar pattern is seen in snd_sb_csp_start().

Although the practical impact is very small (those states aren't
triggered in the same running state and this happens only on a real
hardware, decades old ISA sound boards -- which must be very difficult
to find nowadays), it's a real scenario and has to be fixed.

This patch addresses those deadlocks by splitting the locks in
snd_sb_csp_start() and snd_sb_csp_stop() for avoiding the nested
locks.

Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/7b0fcdaf-cd4f-4728-2eae-48c151a92e10@gmail.com
Link: https://lore.kernel.org/r/20210716132723.13216-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add registration quirk for JBL Quantum headsets

commit b0084afde27fe8a504377dee65f55bc6aa776937 upstream.

These devices has two interfaces, but only the second interface
contains the capture endpoint, thus quirk is required to delay the
registration until the second interface appears.

Tested-by: Jakub Fišer <jakub@ufiseru.cz>
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210721235605.53741-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add missing proc text entry for BESPOKEN type

commit 64752a95b702817602d72f109ceaf5ec0780e283 upstream.

Recently we've added a new usb_mixer element type, USB_MIXER_BESPOKEN,
but it wasn't added in the table in snd_usb_mixer_dump_cval().  This
is no big problem since each bespoken type should have its own dump
method, but it still isn't disallowed to use the standard one, so we
should cover it as well.  Along with it, define the table with the
explicit array initializer for avoiding other pitfalls.

Fixes: 785b6f29a795 ("ALSA: usb-audio: scarlett2: Fix wrong resume call")
Reported-by: Pavel Machek <pavel@denx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210714084836.1977-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/boot: fix use of expolines in the DMA code

commit 463f36c76fa4ec015c640ff63ccf52e7527abee0 upstream.

The DMA code section of the decompressor must be compiled with expolines
if Spectre V2 mitigation has been enabled for the decompressed kernel.
This is required because although the decompressor's image contains
the DMA code section, it is handed over to the decompressed kernel for use.

Because the DMA code is already slow w/o expolines, use expolines always
regardless whether the decompressed kernel is using them or not. This
simplifies the DMA code by dropping the conditional compilation of
expolines.

Fixes: bf72630130c2 ("s390: use proper expoline sections for .dma code")
Cc: <stable@vger.kernel.org> # 5.2
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/ftrace: fix ftrace_update_ftrace_func implementation

commit f8c2602733c953ed7a16e060640b8e96f9d94b9b upstream.

s390 enforces DYNAMIC_FTRACE if FUNCTION_TRACER is selected.
At the same time implementation of ftrace_caller is not compliant with
HAVE_DYNAMIC_FTRACE since it doesn't provide implementation of
ftrace_update_ftrace_func() and calls ftrace_trace_function() directly.

The subtle difference is that during ftrace code patching ftrace
replaces function tracer via ftrace_update_ftrace_func() and activates
it back afterwards. Unexpected direct calls to ftrace_trace_function()
during ftrace code patching leads to nullptr-dereferences when tracing
is activated for one of functions which are used during code patching.
Those function currently are:
copy_from_kernel_nofault()
copy_from_kernel_nofault_allowed()
preempt_count_sub() [with debug_defconfig]
preempt_count_add() [with debug_defconfig]

Corresponding KASAN report:
 BUG: KASAN: nullptr-dereference in function_trace_call+0x316/0x3b0
 Read of size 4 at addr 0000000000001e08 by task migration/0/15

 CPU: 0 PID: 15 Comm: migration/0 Tainted: G B 5.13.0-41423-g08316af3644d
 Hardware name: IBM 3906 M04 704 (LPAR)
 Stopper: multi_cpu_stop+0x0/0x3e0 <- stop_machine_cpuslocked+0x1e4/0x218
 Call Trace:
  [<0000000001f77caa>] show_stack+0x16a/0x1d0
  [<0000000001f8de42>] dump_stack+0x15a/0x1b0
  [<0000000001f81d56>] print_address_description.constprop.0+0x66/0x2e0
  [<000000000082b0ca>] kasan_report+0x152/0x1c0
  [<00000000004cfd8e>] function_trace_call+0x316/0x3b0
  [<0000000001fb7082>] ftrace_caller+0x7a/0x7e
  [<00000000006bb3e6>] copy_from_kernel_nofault_allowed+0x6/0x10
  [<00000000006bb42e>] copy_from_kernel_nofault+0x3e/0xd0
  [<000000000014605c>] ftrace_make_call+0xb4/0x1f8
  [<000000000047a1b4>] ftrace_replace_code+0x134/0x1d8
  [<000000000047a6e0>] ftrace_modify_all_code+0x120/0x1d0
  [<000000000047a7ec>] __ftrace_modify_code+0x5c/0x78
  [<000000000042395c>] multi_cpu_stop+0x224/0x3e0
  [<0000000000423212>] cpu_stopper_thread+0x33a/0x5a0
  [<0000000000243ff2>] smpboot_thread_fn+0x302/0x708
  [<00000000002329ea>] kthread+0x342/0x408
  [<00000000001066b2>] __ret_from_fork+0x92/0xf0
  [<0000000001fb57fa>] ret_from_fork+0xa/0x30

 The buggy address belongs to the page:
 page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1
 flags: 0x1ffff00000001000(reserved|node=0|zone=0|lastcpupid=0x1ffff)
 raw: 1ffff00000001000 0000040000000048 0000040000000048 0000000000000000
 raw: 0000000000000000 0000000000000000 ffffffff00000001 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  0000000000001d00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
  0000000000001d80: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
 >0000000000001e00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
                       ^
  0000000000001e80: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
  0000000000001f00: f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7 f7
 ==================================================================

To fix that introduce ftrace_func callback to be called from
ftrace_caller and update it in ftrace_update_ftrace_func().

Fixes: 4cc9bed034d1 ("[S390] cleanup ftrace backend functions")
Cc: stable@vger.kernel.org
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Don't allocate IDA for OF aliases

commit 10252bae863d09b9648bed2e035572d207200ca1 upstream.

There's a chance that the IDA allocated in mmc_alloc_host() is not freed
for some time because it's freed as part of a class' release function
(see mmc_host_classdev_release() where the IDA is freed). If another
thread is holding a reference to the class, then only once all balancing
device_put() calls (in turn calling kobject_put()) have been made will
the IDA be released and usable again.

Normally this isn't a problem because the kobject is released before
anything else that may want to use the same number tries to again, but
with CONFIG_DEBUG_KOBJECT_RELEASE=y and OF aliases it becomes pretty
easy to try to allocate an alias from the IDA twice while the first time
it was allocated is still pending a call to ida_simple_remove(). It's
also possible to trigger it by using CONFIG_DEBUG_KOBJECT_RELEASE and
probe defering a driver at boot that calls mmc_alloc_host() before
trying to get resources that may defer likes clks or regulators.

Instead of allocating from the IDA in this scenario, let's just skip it
if we know this is an OF alias. The number is already "claimed" and
devices that aren't using OF aliases won't try to use the claimed
numbers anyway (see mmc_first_nonreserved_index()). This should avoid
any issues with mmc_alloc_host() returning failures from the
ida_simple_get() in the case that we're using an OF alias.

Cc: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Cc: Sujit Kautkar <sujitka@chromium.org>
Reported-by: Zubin Mithra <zsm@chromium.org>
Fixes: fa2d0aa96941 ("mmc: core: Allow setting slot index via device tree alias")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210623075002.1746924-3-swboyd@chromium.org
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

proc: Avoid mixing integer types in mem_rw()

[ Upstream commit d238692b4b9f2c36e35af4c6e6f6da36184aeb3e ]

Use size_t when capping the count argument received by mem_rw(). Since
count is size_t, using min_t(int, ...) can lead to a negative value
that will later be passed to access_remote_vm(), which can cause
unexpected behavior.

Since we are capping the value to at maximum PAGE_SIZE, the conversion
from size_t to int when passing it to access_remote_vm() as "len"
shouldn't be a problem.

Link: https://lkml.kernel.org/r/20210512125215.3348316-1-marcelo.cerri@canonical.com
Reviewed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Souza Cascardo <cascardo@canonical.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: fix fallocate when trying to allocate a hole.

[ Upstream commit 488968a8945c119859d91bb6a8dc13bf50002f15 ]

Remove the conditional checking for out_data_len and skipping the fallocate
if it is 0. This is wrong will actually change any legitimate the fallocate
where the entire region is unallocated into a no-op.

Additionally, before allocating the range, if FALLOC_FL_KEEP_SIZE is set then
we need to clamp the length of the fallocate region as to not extend the size of the file.

Fixes: 966a3cb7c7db ("cifs: improve fallocate emulation")
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: only write 64kb at a time when fallocating a small region of a file

[ Upstream commit 2485bd7557a7edb4520b4072af464f0a08c8efe0 ]

We only allow sending single credit writes through the SMB2_write() synchronous
api so split this into smaller chunks.

Fixes: 966a3cb7c7db ("cifs: improve fallocate emulation")

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reported-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: raspberrypi-touchscreen: Prevent double-free

[ Upstream commit 7bbcb919e32d776ca8ddce08abb391ab92eef6a9 ]

The mipi_dsi_device allocated by mipi_dsi_device_register_full() is
already free'd on release.

Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720134525.563936-9-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: cls_api: Fix the the wrong parameter

[ Upstream commit 9d85a6f44bd5585761947f40f7821c9cd78a1bbe ]

The 4th parameter in tc_chain_notify() should be flags rather than seq.
Let's change it back correctly.

Fixes: 32a4f5ecd738 ("net: sched: introduce chain object to uapi")
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: sja1105: make VID 4095 a bridge VLAN too

[ Upstream commit e40cba9490bab1414d45c2d62defc0ad4f6e4136 ]

This simple series of commands:

ip link add br0 type bridge vlan_filtering 1
ip link set swp0 master br0

fails on sja1105 with the following error:
[   33.439103] sja1105 spi0.1: vlan-lookup-table needs to have at least the default untagged VLAN
[   33.447710] sja1105 spi0.1: Invalid config, cannot upload
Warning: sja1105: Failed to change VLAN Ethertype.

For context, sja1105 has 3 operating modes:
- SJA1105_VLAN_UNAWARE: the dsa_8021q_vlans are committed to hardware
- SJA1105_VLAN_FILTERING_FULL: the bridge_vlans are committed to hardware
- SJA1105_VLAN_FILTERING_BEST_EFFORT: both the dsa_8021q_vlans and the
  bridge_vlans are committed to hardware

Swapping out a VLAN list and another in happens in
sja1105_build_vlan_table(), which performs a delta update procedure.
That function is called from a few places, notably from
sja1105_vlan_filtering() which is called from the
SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING handler.

The above set of 2 commands fails when run on a kernel pre-commit
8841f6e63f2c ("net: dsa: sja1105: make devlink property
best_effort_vlan_filtering true by default"). So the priv->vlan_state
transition that takes place is between VLAN-unaware and full VLAN
filtering. So the dsa_8021q_vlans are swapped out and the bridge_vlans
are swapped in.

So why does it fail?

Well, the bridge driver, through nbp_vlan_init(), first sets up the
SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING attribute, and only then
proceeds to call nbp_vlan_add for the default_pvid.

So when we swap out the dsa_8021q_vlans and swap in the bridge_vlans in
the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING handler, there are no bridge
VLANs (yet). So we have wiped the VLAN table clean, and the low-level
static config checker complains of an invalid configuration. We _will_
add the bridge VLANs using the dynamic config interface, albeit later,
when nbp_vlan_add() calls us. So it is natural that it fails.

So why did it ever work?

Surprisingly, it looks like I only tested this configuration with 2
things set up in a particular way:
- a network manager that brings all ports up
- a kernel with CONFIG_VLAN_8021Q=y

It is widely known that commit ad1afb003939 ("vlan_dev: VLAN 0 should be
treated as "no vlan tag" (802.1p packet)") installs VID 0 to every net
device that comes up. DSA treats these VLANs as bridge VLANs, and
therefore, in my testing, the list of bridge_vlans was never empty.

However, if CONFIG_VLAN_8021Q is not enabled, or the port is not up when
it joins a VLAN-aware bridge, the bridge_vlans list will be temporarily
empty, and the sja1105_static_config_reload() call from
sja1105_vlan_filtering() will fail.

To fix this, the simplest thing is to keep VID 4095, the one used for
CPU-injected control packets since commit ed040abca4c1 ("net: dsa:
sja1105: use 4095 as the private VLAN for untagged traffic"), in the
list of bridge VLANs too, not just the list of tag_8021q VLANs. This
ensures that the list of bridge VLANs will never be empty.

Fixes: ec5ae61076d0 ("net: dsa: sja1105: save/restore VLANs using a delta commit method")
Reported-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: disable TFO blackhole logic by default

[ Upstream commit 213ad73d06073b197a02476db3a4998e219ddb06 ]

Multiple complaints have been raised from the TFO users on the internet
stating that the TFO blackhole logic is too aggressive and gets falsely
triggered too often.
(e.g. https://blog.apnic.net/2021/07/05/tcp-fast-open-not-so-fast/)
Considering that most middleboxes no longer drop TFO packets, we decide
to disable the blackhole logic by setting
/proc/sys/net/ipv4/tcp_fastopen_blackhole_timeout_set to 0 by default.

Fixes: cf1ef3f0719b4 ("net/tcp_fastopen: Disable active side TFO in certain scenarios")
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: update active_key for asoc when old key is being replaced

[ Upstream commit 58acd10092268831e49de279446c314727101292 ]

syzbot reported a call trace:

  BUG: KASAN: use-after-free in sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112
  Call Trace:
   sctp_auth_shkey_hold+0x22/0xa0 net/sctp/auth.c:112
   sctp_set_owner_w net/sctp/socket.c:131 [inline]
   sctp_sendmsg_to_asoc+0x152e/0x2180 net/sctp/socket.c:1865
   sctp_sendmsg+0x103b/0x1d30 net/sctp/socket.c:2027
   inet_sendmsg+0x99/0xe0 net/ipv4/af_inet.c:821
   sock_sendmsg_nosec net/socket.c:703 [inline]
   sock_sendmsg+0xcf/0x120 net/socket.c:723

This is an use-after-free issue caused by not updating asoc->shkey after
it was replaced in the key list asoc->endpoint_shared_keys, and the old
key was freed.

This patch is to fix by also updating active_key for asoc when old key is
being replaced with a new one. Note that this issue doesn't exist in
sctp_auth_del_key_id(), as it's not allowed to delete the active_key
from the asoc.

Fixes: 1b1e0bc99474 ("sctp: add refcnt support for sh_key")
Reported-by: syzbot+b774577370208727d12b@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: set the PRACT bit when using Write Zeroes with T10 PI

[ Upstream commit aaeb7bb061be545251606f4d9c82d710ca2a7c8e ]

When using Write Zeroes on a namespace that has protection
information enabled they behavior without the PRACT bit
counter-intuitive and will generally lead to validation failures
when reading the written blocks.  Fix this by always setting the
PRACT bit that generates matching PI data on the fly.

Fixes: 6e02318eaea5 ("nvme: add support for the Write Zeroes command")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8169: Avoid duplicate sysfs entry creation error

[ Upstream commit e9a72f874d5b95cef0765bafc56005a50f72c5fe ]

When registering the MDIO bus for a r8169 device, we use the PCI
bus/device specifier as a (seemingly) unique device identifier.
However the very same BDF number can be used on another PCI segment,
which makes the driver fail probing:

[ 27.544136] r8169 0002:07:00.0: enabling device (0000 -> 0003)
[ 27.559734] sysfs: cannot create duplicate filename '/class/mdio_bus/r8169-700'
....
[ 27.684858] libphy: mii_bus r8169-700 failed to register
[ 27.695602] r8169: probe of 0002:07:00.0 failed with error -22

Add the segment number to the device name to make it more unique.

This fixes operation on ARM N1SDP boards, with two boards connected
together to form an SMP system, and all on-board devices showing up
twice, just on different PCI segments. A similar issue would occur on
large systems with many PCI slots and multiple RTL8169 NICs.

Fixes: f1e911d5d0dfd ("r8169: add basic phylib support")
Signed-off-by: Sayanta Pattanayak <sayanta.pattanayak@arm.com>
[Andre: expand commit message, use pci_domain_nr()]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Fix tracepoint string placement with built-in AFS

[ Upstream commit 6c881ca0b3040f3e724eae513117ba4ddef86057 ]

To quote Alexey[1]:

    I was adding custom tracepoint to the kernel, grabbed full F34 kernel
    .config, disabled modules and booted whole shebang as VM kernel.

    Then did

perf record -a -e ...

    It crashed:

general protection fault, probably for non-canonical address 0x435f5346592e4243: 0000 [#1] SMP PTI
CPU: 1 PID: 842 Comm: cat Not tainted 5.12.6+ #26
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
RIP: 0010:t_show+0x22/0xd0

    Then reproducer was narrowed to

# cat /sys/kernel/tracing/printk_formats

    Original F34 kernel with modules didn't crash.

    So I started to disable options and after disabling AFS everything
    started working again.

    The root cause is that AFS was placing char arrays content into a
    section full of _pointers_ to strings with predictable consequences.

    Non canonical address 435f5346592e4243 is "CB.YFS_" which came from
    CM_NAME macro.

    Steps to reproduce:

CONFIG_AFS=y
CONFIG_TRACING=y

# cat /sys/kernel/tracing/printk_formats

Fix this by the following means:

 (1) Add enum->string translation tables in the event header with the AFS
     and YFS cache/callback manager operations listed by RPC operation ID.

 (2) Modify the afs_cb_call tracepoint to print the string from the
     translation table rather than using the string at the afs_call name
     pointer.

 (3) Switch translation table depending on the service we're being accessed
     as (AFS or YFS) in the tracepoint print clause.  Will this cause
     problems to userspace utilities?

     Note that the symbolic representation of the YFS service ID isn't
     available to this header, so I've put it in as a number.  I'm not sure
     if this is the best way to do this.

 (4) Remove the name wrangling (CM_NAME) macro and put the names directly
     into the afs_call_type structs in cmservice.c.

Fixes: 8e8d7f13b6d5a9 ("afs: Add some tracepoints")
Reported-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: Andrew Morton <akpm@linux-foundation.org>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/YLAXfvZ+rObEOdc%2F@localhost.localdomain/
Link: https://lore.kernel.org/r/643721.1623754699@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/162430903582.2896199.6098150063997983353.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/162609463957.3133237.15916579353149746363.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/162610726860.3408253.445207609466288531.stgit@warthog.procyon.org.uk/
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem"

[ Upstream commit f3a1a937f7b240be623d989c8553a6d01465d04f ]

This reverts commit 0bd860493f81eb2a46173f6f5e44cc38331c8dbd.

While the patch was working as stated,ie preventing the L850-GL LTE modem
from crashing on some U3 wake-ups due to a race condition between the
host wake-up and the modem-side wake-up, when using the MBIM interface,
this would force disabling the USB runtime PM on the device.

The increased power consumption is significant for LTE laptops,
and given that with decently recent modem firmwares, when the modem hits
the bug, it automatically recovers (ie it drops from the bus, but
automatically re-enumerates after less than half a second, rather than being
stuck until a power cycle as it was doing with ancient firmware), for
most people, the trade-off now seems in favor of re-enabling it by
default.

For people with access to the platform code, the bug can also be worked-around
successfully by changing the USB3 LFPM polling off-time for the XHCI
controller in the BIOS code.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Link: https://lore.kernel.org/r/20210721092516.2775971-1-vpalatin@chromium.org
Fixes: 0bd860493f81 ("USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-pci: don't WARN_ON in nvme_reset_work if ctrl.state is not RESETTING

[ Upstream commit 7764656b108cd308c39e9a8554353b8f9ca232a3 ]

Followling process:
nvme_probe
  nvme_reset_ctrl
    nvme_change_ctrl_state(ctrl, NVME_CTRL_RESETTING)
    queue_work(nvme_reset_wq, &ctrl->reset_work)

--------------> nvme_remove
  nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_DELETING)
worker_thread
  process_one_work
    nvme_reset_work
    WARN_ON(dev->ctrl.state != NVME_CTRL_RESETTING)

, which will trigger WARN_ON in nvme_reset_work():
[  127.534298] WARNING: CPU: 0 PID: 139 at drivers/nvme/host/pci.c:2594
[  127.536161] CPU: 0 PID: 139 Comm: kworker/u8:7 Not tainted 5.13.0
[  127.552518] Call Trace:
[  127.552840]  ? kvm_sched_clock_read+0x25/0x40
[  127.553936]  ? native_send_call_func_single_ipi+0x1c/0x30
[  127.555117]  ? send_call_function_single_ipi+0x9b/0x130
[  127.556263]  ? __smp_call_single_queue+0x48/0x60
[  127.557278]  ? ttwu_queue_wakelist+0xfa/0x1c0
[  127.558231]  ? try_to_wake_up+0x265/0x9d0
[  127.559120]  ? ext4_end_io_rsv_work+0x160/0x290
[  127.560118]  process_one_work+0x28c/0x640
[  127.561002]  worker_thread+0x39a/0x700
[  127.561833]  ? rescuer_thread+0x580/0x580
[  127.562714]  kthread+0x18c/0x1e0
[  127.563444]  ? set_kthread_struct+0x70/0x70
[  127.564347]  ret_from_fork+0x1f/0x30

The preceding problem can be easily reproduced by executing following
script (based on blktests suite):
test() {
  pdev="$(_get_pci_dev_from_blkdev)"
  sysfs="/sys/bus/pci/devices/${pdev}"
  for ((i = 0; i < 10; i++)); do
    echo 1 > "$sysfs/remove"
    echo 1 > /sys/bus/pci/rescan
  done
}

Since the device ctrl could be updated as an non-RESETTING state by
repeating probe/remove in userspace (which is a normal situation), we
can replace stack dumping WARN_ON with a warnning message.

Fixes: 82b057caefaff ("nvme-pci: fix multiple ctrl removal schedulin")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: don't WARN if we're still opening a session to an MDS

[ Upstream commit cdb330f4b41ab55feb35487729e883c9e08b8a54 ]

If MDSs aren't available while mounting a filesystem, the session state
will transition from SESSION_OPENING to SESSION_CLOSING.  And in that
scenario check_session_state() will be called from delayed_work() and
trigger this WARN.

Avoid this by only WARNing after a session has already been established
(i.e., the s_ttl will be different from 0).

Fixes: 62575e270f66 ("ceph: check session state after bumping session->s_seq")
Signed-off-by: Luis Henriques <lhenriques@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptions

[ Upstream commit 8fb4792f091e608a0a1d353dfdf07ef55a719db5 ]

While running the self-tests on a KASAN enabled kernel, I observed a
slab-out-of-bounds splat very similar to the one reported in
commit 821bbf79fe46 ("ipv6: Fix KASAN: slab-out-of-bounds Read in
 fib6_nh_flush_exceptions").

We additionally need to take care of fib6_metrics initialization
failure when the caller provides an nh.

The fix is similar, explicitly free the route instead of calling
fib6_info_release on a half-initialized object.

Fixes: f88d8ea67fbdb ("ipv6: Plumb support for nexthop object in a fib6_info")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: act_skbmod: Skip non-Ethernet packets

[ Upstream commit 727d6a8b7ef3d25080fad228b2c4a1d4da5999c6 ]

Currently tcf_skbmod_act() assumes that packets use Ethernet as their L2
protocol, which is not always the case.  As an example, for CAN devices:

$ ip link add dev vcan0 type vcan
$ ip link set up vcan0
$ tc qdisc add dev vcan0 root handle 1: htb
$ tc filter add dev vcan0 parent 1: protocol ip prio 10 \
matchall action skbmod swap mac

Doing the above silently corrupts all the packets.  Do not perform skbmod
actions for non-Ethernet packets.

Fixes: 86da71b57383 ("net_sched: Introduce skbmod action")
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spi-bcm2835: Fix deadlock

[ Upstream commit c45c1e82bba130db4f19d9dbc1deefcf4ea994ed ]

The bcm2835_spi_transfer_one function can create a deadlock
if it is called while another thread already has the
CCF lock.

Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Fixes: f8043872e796 ("spi: add driver for BCM2835")
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210716210245.13240-2-alexandru.tachici@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix rx VLAN offload state inconsistent issue

[ Upstream commit bbfd4506f962e7e6fff8f37f017154a3c3791264 ]

Currently, VF doesn't enable rx VLAN offload when initializating,
and PF does it for VFs. If user disable the rx VLAN offload for
VF with ethtool -K, and reload the VF driver, it may cause the
rx VLAN offload state being inconsistent between hardware and
software.

Fixes it by enabling rx VLAN offload when VF initializing.

Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix possible mismatches resp of mailbox

[ Upstream commit 1b713d14dc3c077ec45e65dab4ea01a8bc41b8c1 ]

Currently, the mailbox synchronous communication between VF and PF use
the following fields to maintain communication:
1. Origin_mbx_msg which was combined by message code and subcode, used
to match request and response.
2. Received_resp which means whether received response.

There may possible mismatches of the following situation:
1. VF sends message A with code=1 subcode=1.
2. PF was blocked about 500ms when processing the message A.
3. VF will detect message A timeout because it can't get the response
within 500ms.
4. VF sends message B with code=1 subcode=1 which equal message A.
5. PF processes the first message A and send the response message to
VF.
6. VF will identify the response matched the message B because the
code/subcode is the same. This will lead to mismatch of request and
response.

To fix the above bug, we use the following scheme:
1. The message sent from VF was labelled with match_id which was a
unique 16-bit non-zero value.
2. The response sent from PF will label with match_id which got from
the request.
3. The VF uses the match_id to match request and response message.

As for PF driver, it only needs to copy the match_id from request to
response.

Fixes: dde1a86e93ca ("net: hns3: Add mailbox support to PF driver")
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: intel-dsp-cfg: add missing ElkhartLake PCI ID

[ Upstream commit 114613f62f42e7cbc1242c4e82076a0153043761 ]

We missed the fact that ElkhartLake platforms have two different PCI
IDs. We only added one so the SOF driver is never selected by the
autodetection logic for the missing configuration.

BugLink: https://github.com/thesofproject/linux/issues/2990
Fixes: cc8f81c7e625 ('ALSA: hda: fix intel DSP config')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210719231746.557325-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/tcp_fastopen: fix data races around tfo_active_disable_stamp

[ Upstream commit 6f20c8adb1813467ea52c1296d52c4e95978cb2f ]

tfo_active_disable_stamp is read and written locklessly.
We need to annotate these accesses appropriately.

Then, we need to perform the atomic_inc(tfo_active_disable_times)
after the timestamp has been updated, and thus add barriers
to make sure tcp_fastopen_active_should_disable() wont read
a stale timestamp.

Fixes: cf1ef3f0719b ("net/tcp_fastopen: Disable active side TFO in certain scenarios")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hisilicon: rename CACHE_LINE_MASK to avoid redefinition

[ Upstream commit b16f3299ae1aa3c327e1fb742d0379ae4d6e86f2 ]

Building on ARCH=arc causes a "redefined" warning, so rename this
driver's CACHE_LINE_MASK to avoid the warning.

../drivers/net/ethernet/hisilicon/hip04_eth.c:134: warning: "CACHE_LINE_MASK" redefined
  134 | #define CACHE_LINE_MASK   0x3F
In file included from ../include/linux/cache.h:6,
                 from ../include/linux/printk.h:9,
                 from ../include/linux/kernel.h:19,
                 from ../include/linux/list.h:9,
                 from ../include/linux/module.h:12,
                 from ../drivers/net/ethernet/hisilicon/hip04_eth.c:7:
../arch/arc/include/asm/cache.h:17: note: this is the location of the previous definition
   17 | #define CACHE_LINE_MASK  (~(L1_CACHE_BYTES - 1))

Fixes: d413779cdd93 ("net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Check abort error state in bnxt_half_open_nic()

[ Upstream commit 11a39259ff79b74bc99f8b7c44075a2d6d5e7ab1 ]

bnxt_half_open_nic() is called during during ethtool self test and is
protected by rtnl_lock.  Firmware reset can be happening at the same
time.  Only critical portions of the entire firmware reset sequence
are protected by the rtnl_lock.  It is possible that bnxt_half_open_nic()
can be called when the firmware reset sequence is aborting.  In that
case, bnxt_half_open_nic() needs to check if the ABORT_ERR flag is set
and abort if it is.  The ethtool self test will fail but the NIC will be
brought to a consistent IF_DOWN state.

Without this patch, if bnxt_half_open_nic() were to continue in this
error state, it may crash like this:

  bnxt_en 0000:82:00.1 enp130s0f1np1: FW reset in progress during close, FW reset will be aborted
  Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
  ...
  Process ethtool (pid: 333327, stack limit = 0x0000000046476577)
  Call trace:
  bnxt_alloc_mem+0x444/0xef0 [bnxt_en]
  bnxt_half_open_nic+0x24/0xb8 [bnxt_en]
  bnxt_self_test+0x2dc/0x390 [bnxt_en]
  ethtool_self_test+0xe0/0x1f8
  dev_ethtool+0x1744/0x22d0
  dev_ioctl+0x190/0x3e0
  sock_ioctl+0x238/0x480
  do_vfs_ioctl+0xc4/0x758
  ksys_ioctl+0x84/0xb8
  __arm64_sys_ioctl+0x28/0x38
  el0_svc_handler+0xb0/0x180
  el0_svc+0x8/0xc

Fixes: a1301f08c5ac ("bnxt_en: Check abort error state in bnxt_open_nic().")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Validate vlan protocol ID on RX packets

[ Upstream commit 96bdd4b9ea7ef9a12db8fdd0ce90e37dffbd3703 ]

Only pass supported VLAN protocol IDs for stripped VLAN tags to the
stack.  The stack will hit WARN() if the protocol ID is unsupported.

Existing firmware sets up the chip to strip 0x8100, 0x88a8, 0x9100.
Only the 1st two protocols are supported by the kernel.

Fixes: a196e96bb68f ("bnxt_en: clean up VLAN feature bit handling")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Add missing check for BNXT_STATE_ABORT_ERR in bnxt_fw_rset_task()

[ Upstream commit 6cd657cb3ee6f4de57e635b126ffbe0e51d00f1a ]

In the BNXT_FW_RESET_STATE_POLL_VF state in bnxt_fw_reset_task() after all
VFs have unregistered, we need to check for BNXT_STATE_ABORT_ERR after
we acquire the rtnl_lock.  If the flag is set, we need to abort.

Fixes: 230d1f0de754 ("bnxt_en: Handle firmware reset.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Refresh RoCE capabilities in bnxt_ulp_probe()

[ Upstream commit 2c9f046bc377efd1f5e26e74817d5f96e9506c86 ]

The capabilities can change after firmware upgrade/downgrade, so we
should get the up-to-date RoCE capabilities everytime bnxt_ulp_probe()
is called.

Fixes: 2151fe0830fd ("bnxt_en: Handle RESET_NOTIFY async event from firmware.")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: don't disable an already disabled PCI device

[ Upstream commit c81cfb6256d90ea5ba4a6fb280ea3b171be4e05c ]

If device is already disabled in reset path and PCI io error is
detected before the device could be enabled, driver could
call pci_disable_device() for already disabled device. Fix this
problem by calling pci_disable_device() only if the device is already
enabled.

Fixes: 6316ea6db93d ("bnxt_en: Enable AER support.")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: Kconfig: Fix table override from built-in initrd

[ Upstream commit d2cbbf1fe503c07e466c62f83aa1926d74d15821 ]

During a rework of initramfs code the INITRAMFS_COMPRESSION config
option was removed in commit 65e00e04e5ae. A leftover as a dependency
broke the config option ACPI_TABLE_OVERRIDE_VIA_ BUILTIN_INITRD that
is used to enable the overriding of ACPI tables from built-in initrd.
Fixing the dependency.

Fixes: 65e00e04e5ae ("initramfs: refactor the initramfs build rules")
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: cadence: Correct initialisation of runtime PM again

[ Upstream commit 56912da7a68c8356df6a6740476237441b0b792a ]

The original implementation of RPM handling in probe() was mostly
correct, except it failed to call pm_runtime_get_*() to activate the
hardware. The subsequent fix, 734882a8bf98 ("spi: cadence: Correct
initialisation of runtime PM"), breaks the implementation further,
to the point where the system using this hard IP on ZynqMP hangs on
boot, because it accesses hardware which is gated off.

Undo 734882a8bf98 ("spi: cadence: Correct initialisation of runtime
PM") and instead add missing pm_runtime_get_noresume() and move the
RPM disabling all the way to the end of probe(). That makes ZynqMP
not hang on boot yet again.

Fixes: 734882a8bf98 ("spi: cadence: Correct initialisation of runtime PM")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210716182133.218640-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: Fix protect handling in WRITE SAME(32)

[ Upstream commit 6d8e7e7c932162bccd06872362751b0e1d76f5af ]

WRITE SAME(32) command handling reads WRPROTECT at the wrong offset in 1st
byte instead of 10th byte.

Link: https://lore.kernel.org/r/20210702091655.22818-1-d.bogdanov@yadro.com
Fixes: afd73f1b60fc ("target: Perform PROTECT sanity checks for WRITE_SAME")
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: iscsi: Fix iface sysfs attr detection

[ Upstream commit e746f3451ec7f91dcc9fd67a631239c715850a34 ]

A ISCSI_IFACE_PARAM can have the same value as a ISCSI_NET_PARAM so when
iscsi_iface_attr_is_visible tries to figure out the type by just checking
the value, we can collide and return the wrong type. When we call into the
driver we might not match and return that we don't want attr visible in
sysfs. The patch fixes this by setting the type when we figure out what the
param is.

Link: https://lore.kernel.org/r/20210701002559.89533-1-michael.christie@oracle.com
Fixes: 3e0f65b34cc9 ("[SCSI] iscsi_transport: Additional parameters for network settings")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netrom: Decrease sock refcount when sock timers expire

[ Upstream commit 517a16b1a88bdb6b530f48d5d153478b2552d9a8 ]

Commit 63346650c1a9 ("netrom: switch to sock timer API") switched to use
sock timer API. It replaces mod_timer() by sk_reset_timer(), and
del_timer() by sk_stop_timer().

Function sk_reset_timer() will increase the refcount of sock if it is
called on an inactive timer, hence, in case the timer expires, we need to
decrease the refcount ourselves in the handler, otherwise, the sock
refcount will be unbalanced and the sock will never be freed.

Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Reported-by: syzbot+10f1194569953b72f1ae@syzkaller.appspotmail.com
Fixes: 63346650c1a9 ("netrom: switch to sock timer API")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: trim optlen when it's a huge value in sctp_setsockopt

[ Upstream commit 2f3fdd8d4805015fa964807e1c7f3d88f31bd389 ]

After commit ca84bd058dae ("sctp: copy the optval from user space in
sctp_setsockopt"), it does memory allocation in sctp_setsockopt with
the optlen, and it would fail the allocation and return error if the
optlen from user space is a huge value.

This breaks some sockopts, like SCTP_HMAC_IDENT, SCTP_RESET_STREAMS and
SCTP_AUTH_KEY, as when processing these sockopts before, optlen would
be trimmed to a biggest value it needs when optlen is a huge value,
instead of failing the allocation and returning error.

This patch is to fix the allocation failure when it's a huge optlen from
user space by trimming it to the biggest size sctp sockopt may need when
necessary, and this biggest size is from sctp_setsockopt_reset_streams()
for SCTP_RESET_STREAMS, which is bigger than those for SCTP_HMAC_IDENT
and SCTP_AUTH_KEY.

Fixes: ca84bd058dae ("sctp: copy the optval from user space in sctp_setsockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: fix memory leak in tcindex_partial_destroy_work

[ Upstream commit f5051bcece50140abd1a11a2d36dc3ec5484fc32 ]

Syzbot reported memory leak in tcindex_set_parms(). The problem was in
non-freed perfect hash in tcindex_partial_destroy_work().

In tcindex_set_parms() new tcindex_data is allocated and some fields from
old one are copied to new one, but not the perfect hash. Since
tcindex_partial_destroy_work() is the destroy function for old
tcindex_data, we need to free perfect hash to avoid memory leak.

Reported-and-tested-by: syzbot+f0bbb2287b8993d4fa74@syzkaller.appspotmail.com
Fixes: 331b72922c5f ("net: sched: RCU cls_tcindex")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Fix kvm_arch_vcpu_ioctl vcpu_load leak

[ Upstream commit bc4188a2f56e821ea057aca6bf444e138d06c252 ]

vcpu_put is not called if the user copy fails. This can result in preempt
notifier corruption and crashes, among other issues.

Fixes: b3cebfe8c1ca ("KVM: PPC: Move vcpu_load/vcpu_put down to each ioctl case in kvm_arch_vcpu_ioctl")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210716024310.164448-2-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Book3S: Fix CONFIG_TRANSACTIONAL_MEM=n crash

[ Upstream commit bd31ecf44b8e18ccb1e5f6b50f85de6922a60de3 ]

When running CPU_FTR_P9_TM_HV_ASSIST, HFSCR[TM] is set for the guest
even if the host has CONFIG_TRANSACTIONAL_MEM=n, which causes it to be
unprepared to handle guest exits while transactional.

Normal guests don't have a problem because the HTM capability will not
be advertised, but a rogue or buggy one could crash the host.

Fixes: 4bb3c7a0208f ("KVM: PPC: Book3S HV: Work around transactional memory bugs in POWER9")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210716024310.164448-1-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: decnet: Fix sleeping inside in af_decnet

[ Upstream commit 5f119ba1d5771bbf46d57cff7417dcd84d3084ba ]

The release_sock() is blocking function, it would change the state
after sleeping. use wait_woken() instead.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi/tpm: Differentiate missing and invalid final event log table.

[ Upstream commit 674a9f1f6815849bfb5bf385e7da8fc198aaaba9 ]

Missing TPM final event log table is not a firmware bug.

Clearly if providing event log in the old format makes the final event
log invalid it should not be provided at least in that case.

Fixes: b4f1874c6216 ("tpm: check event log version before reading final events")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dma-mapping: handle vmalloc addresses in dma_common_{mmap,get_sgtable}

[ Upstream commit 40ac971eab89330d6153e7721e88acd2d98833f9 ]

xen-swiotlb can use vmalloc backed addresses for dma coherent allocations
and uses the common helpers.  Properly handle them to unbreak Xen on
ARM platforms.

Fixes: 1b65c4e5a9af ("swiotlb-xen: use xen_alloc/free_coherent_pages")
Signed-off-by: Roman Skakun <roman_skakun@epam.com>
Reviewed-by: Andrii Anisov <andrii_anisov@epam.com>
[hch: split the patch, renamed the helpers]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: hso: fix error handling code of hso_create_net_device

[ Upstream commit a6ecfb39ba9d7316057cea823b196b734f6b18ca ]

The current error handling code of hso_create_net_device is
hso_free_net_device, no matter which errors lead to. For example,
WARNING in hso_free_net_device [1].

Fix this by refactoring the error handling code of
hso_create_net_device by handling different errors by different code.

[1] https://syzkaller.appspot.com/bug?id=66eff8d49af1b28370ad342787413e35bbe76efe

Reported-by: syzbot+44d53c7255bb1aea22d2@syzkaller.appspotmail.com
Fixes: 5fcfb6d0bfcd ("hso: fix bailout in error case of probe")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fix uninit-value in caif_seqpkt_sendmsg

[ Upstream commit 991e634360f2622a683b48dfe44fe6d9cb765a09 ]

When nr_segs equal to zero in iovec_from_user, the object
msg->msg_iter.iov is uninit stack memory in caif_seqpkt_sendmsg
which is defined in ___sys_sendmsg. So we cann't just judge
msg->msg_iter.iov->base directlly. We can use nr_segs to judge
msg in caif_seqpkt_sendmsg whether has data buffers.

=====================================================
BUG: KMSAN: uninit-value in caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
 caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg net/socket.c:672 [inline]
 ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2343
 ___sys_sendmsg net/socket.c:2397 [inline]
 __sys_sendmmsg+0x808/0xc90 net/socket.c:2480
 __compat_sys_sendmmsg net/compat.c:656 [inline]

Reported-by: syzbot+09a5d591c1f98cf5efcb@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=1ace85e8fc9b0d5a45c08c2656c3e91762daa9b8
Fixes: bece7b2398d0 ("caif: Rewritten socket implementation")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpftool: Check malloc return value in mount_bpffs_for_pin

[ Upstream commit d444b06e40855219ef38b5e9286db16d435f06dc ]

Fix and add a missing NULL check for the prior malloc() call.

Fixes: 49a086c201a9 ("bpftool: implement prog load command")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Roman Gushchin <guro@fb.com>
Link: https://lore.kernel.org/bpf/20210715110609.29364-1-tklauser@distanz.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, sockmap, udp: sk_prot needs inuse_idx set for proc stats

[ Upstream commit 54ea2f49fd9400dd698c25450be3352b5613b3b4 ]

The proc socket stats use sk_prot->inuse_idx value to record inuse sock
stats. We currently do not set this correctly from sockmap side. The
result is reading sock stats '/proc/net/sockstat' gives incorrect values.
The socket counter is incremented correctly, but because we don't set the
counter correctly when we replace sk_prot we may omit the decrement.

To get the correct inuse_idx value move the core_initcall that initializes
the UDP proto handlers to late_initcall. This way it is initialized after
UDP has the chance to assign the inuse_idx value from the register protocol
handler.

Fixes: edc6741cc660 ("bpf: Add sockmap hooks for UDP sockets")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210714154750.528206-1-jakub@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, sockmap, tcp: sk_prot needs inuse_idx set for proc stats

[ Upstream commit 228a4a7ba8e99bb9ef980b62f71e3be33f4aae69 ]

The proc socket stats use sk_prot->inuse_idx value to record inuse sock
stats. We currently do not set this correctly from sockmap side. The
result is reading sock stats '/proc/net/sockstat' gives incorrect values.
The socket counter is incremented correctly, but because we don't set the
counter correctly when we replace sk_prot we may omit the decrement.

To get the correct inuse_idx value move the core_initcall that initializes
the TCP proto handlers to late_initcall. This way it is initialized after
TCP has the chance to assign the inuse_idx value from the register protocol
handler.

Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/bpf/20210712195546.423990-3-john.fastabend@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, sockmap: Fix potential memory leak on unlikely error case

[ Upstream commit 7e6b27a69167f97c56b5437871d29e9722c3e470 ]

If skb_linearize is needed and fails we could leak a msg on the error
handling. To fix ensure we kfree the msg block before returning error.
Found during code review.

Fixes: 4363023d2668e ("bpf, sockmap: Avoid failures from skb_to_sgvec when skb has frag_list")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/bpf/20210712195546.423990-2-john.fastabend@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/bpf: Perform r1 range checking before accessing jit->seen_reg[r1]

[ Upstream commit 91091656252f5d6d8c476e0c92776ce9fae7b445 ]

Currently array jit->seen_reg[r1] is being accessed before the range
checking of index r1. The range changing on r1 should be performed
first since it will avoid any potential out-of-range accesses on the
array seen_reg[] and also it is more optimal to perform checks on r1
before fetching data from the array. Fix this by swapping the order
of the checks before the array access.

Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20210715125712.24690-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

liquidio: Fix unintentional sign extension issue on left shift of u16

[ Upstream commit e7efc2ce3d0789cd7c21b70ff00cd7838d382639 ]

Shifting the u16 integer oct->pcie_port by CN23XX_PKT_INPUT_CTL_MAC_NUM_POS
(29) bits will be promoted to a 32 bit signed int and then sign-extended
to a u64. In the cases where oct->pcie_port where bit 2 is set (e.g. 3..7)
the shifted value will be sign extended and the top 32 bits of the result
will be set.

Fix this by casting the u16 values to a u64 before the 29 bit left shift.

Addresses-Coverity: ("Unintended sign extension")

Fixes: 3451b97cce2d ("liquidio: CN23XX register setup")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

timers: Fix get_next_timer_interrupt() with no timers pending

[ Upstream commit aebacb7f6ca1926918734faae14d1f0b6fae5cb7 ]

31cd0e119d50 ("timers: Recalculate next timer interrupt only when
necessary") subtly altered get_next_timer_interrupt()'s behaviour. The
function no longer consistently returns KTIME_MAX with no timers
pending.

In order to decide if there are any timers pending we check whether the
next expiry will happen NEXT_TIMER_MAX_DELTA jiffies from now.
Unfortunately, the next expiry time and the timer base clock are no
longer updated in unison. The former changes upon certain timer
operations (enqueue, expire, detach), whereas the latter keeps track of
jiffies as they move forward. Ultimately breaking the logic above.

A simplified example:

- Upon entering get_next_timer_interrupt() with:

jiffies = 1
base->clk = 0;
base->next_expiry = NEXT_TIMER_MAX_DELTA;

  'base->next_expiry == base->clk + NEXT_TIMER_MAX_DELTA', the function
  returns KTIME_MAX.

- 'base->clk' is updated to the jiffies value.

- The next time we enter get_next_timer_interrupt(), taking into account
  no timer operations happened:

base->clk = 1;
base->next_expiry = NEXT_TIMER_MAX_DELTA;

  'base->next_expiry != base->clk + NEXT_TIMER_MAX_DELTA', the function
  returns a valid expire time, which is incorrect.

This ultimately might unnecessarily rearm sched's timer on nohz_full
setups, and add latency to the system[1].

So, introduce 'base->timers_pending'[2], update it every time
'base->next_expiry' changes, and use it in get_next_timer_interrupt().

[1] See tick_nohz_stop_tick().
[2] A quick pahole check on x86_64 and arm64 shows it doesn't make
    'struct timer_base' any bigger.

Fixes: 31cd0e119d50 ("timers: Recalculate next timer interrupt only when necessary")
Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xdp, net: Fix use-after-free in bpf_xdp_link_release

[ Upstream commit 5acc7d3e8d342858405fbbc671221f676b547ce7 ]

The problem occurs between dev_get_by_index() and dev_xdp_attach_link().
At this point, dev_xdp_uninstall() is called. Then xdp link will not be
detached automatically when dev is released. But link->dev already
points to dev, when xdp link is released, dev will still be accessed,
but dev has been released.

dev_get_by_index()        |
link->dev = dev           |
                          |      rtnl_lock()
                          |      unregister_netdevice_many()
                          |          dev_xdp_uninstall()
                          |      rtnl_unlock()
rtnl_lock();              |
dev_xdp_attach_link()     |
rtnl_unlock();            |
                          |      netdev_run_todo() // dev released
bpf_xdp_link_release()    |
    /* access dev.        |
       use-after-free */  |

[   45.966867] BUG: KASAN: use-after-free in bpf_xdp_link_release+0x3b8/0x3d0
[   45.967619] Read of size 8 at addr ffff00000f9980c8 by task a.out/732
[   45.968297]
[   45.968502] CPU: 1 PID: 732 Comm: a.out Not tainted 5.13.0+ #22
[   45.969222] Hardware name: linux,dummy-virt (DT)
[   45.969795] Call trace:
[   45.970106]  dump_backtrace+0x0/0x4c8
[   45.970564]  show_stack+0x30/0x40
[   45.970981]  dump_stack_lvl+0x120/0x18c
[   45.971470]  print_address_description.constprop.0+0x74/0x30c
[   45.972182]  kasan_report+0x1e8/0x200
[   45.972659]  __asan_report_load8_noabort+0x2c/0x50
[   45.973273]  bpf_xdp_link_release+0x3b8/0x3d0
[   45.973834]  bpf_link_free+0xd0/0x188
[   45.974315]  bpf_link_put+0x1d0/0x218
[   45.974790]  bpf_link_release+0x3c/0x58
[   45.975291]  __fput+0x20c/0x7e8
[   45.975706]  ____fput+0x24/0x30
[   45.976117]  task_work_run+0x104/0x258
[   45.976609]  do_notify_resume+0x894/0xaf8
[   45.977121]  work_pending+0xc/0x328
[   45.977575]
[   45.977775] The buggy address belongs to the page:
[   45.978369] page:fffffc00003e6600 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4f998
[   45.979522] flags: 0x7fffe0000000000(node=0|zone=0|lastcpupid=0x3ffff)
[   45.980349] raw: 07fffe0000000000 fffffc00003e6708 ffff0000dac3c010 0000000000000000
[   45.981309] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[   45.982259] page dumped because: kasan: bad access detected
[   45.982948]
[   45.983153] Memory state around the buggy address:
[   45.983753]  ffff00000f997f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   45.984645]  ffff00000f998000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   45.985533] >ffff00000f998080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   45.986419]                                               ^
[   45.987112]  ffff00000f998100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   45.988006]  ffff00000f998180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   45.988895] ==================================================================
[   45.989773] Disabling lock debugging due to kernel taint
[   45.990552] Kernel panic - not syncing: panic_on_warn set ...
[   45.991166] CPU: 1 PID: 732 Comm: a.out Tainted: G    B             5.13.0+ #22
[   45.991929] Hardware name: linux,dummy-virt (DT)
[   45.992448] Call trace:
[   45.992753]  dump_backtrace+0x0/0x4c8
[   45.993208]  show_stack+0x30/0x40
[   45.993627]  dump_stack_lvl+0x120/0x18c
[   45.994113]  dump_stack+0x1c/0x34
[   45.994530]  panic+0x3a4/0x7d8
[   45.994930]  end_report+0x194/0x198
[   45.995380]  kasan_report+0x134/0x200
[   45.995850]  __asan_report_load8_noabort+0x2c/0x50
[   45.996453]  bpf_xdp_link_release+0x3b8/0x3d0
[   45.997007]  bpf_link_free+0xd0/0x188
[   45.997474]  bpf_link_put+0x1d0/0x218
[   45.997942]  bpf_link_release+0x3c/0x58
[   45.998429]  __fput+0x20c/0x7e8
[   45.998833]  ____fput+0x24/0x30
[   45.999247]  task_work_run+0x104/0x258
[   45.999731]  do_notify_resume+0x894/0xaf8
[   46.000236]  work_pending+0xc/0x328
[   46.000697] SMP: stopping secondary CPUs
[   46.001226] Dumping ftrace buffer:
[   46.001663]    (ftrace buffer empty)
[   46.002110] Kernel Offset: disabled
[   46.002545] CPU features: 0x00000001,23202c00
[   46.003080] Memory Limit: none

Fixes: aa8d3a716b59db6c ("bpf, xdp: Add bpf_link-based XDP attachment API")
Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210710031635.41649-1-xuanzhuo@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix tail_call_reachable rejection for interpreter when jit failed

[ Upstream commit 5dd0a6b8582ffbfa88351949d50eccd5b6694ade ]

During testing of f263a81451c1 ("bpf: Track subprog poke descriptors correctly
and fix use-after-free") under various failure conditions, for example, when
jit_subprogs() fails and tries to clean up the program to be run under the
interpreter, we ran into the following freeze:

  [...]
  #127/8 tailcall_bpf2bpf_3:FAIL
  [...]
  [   92.041251] BUG: KASAN: slab-out-of-bounds in ___bpf_prog_run+0x1b9d/0x2e20
  [   92.042408] Read of size 8 at addr ffff88800da67f68 by task test_progs/682
  [   92.043707]
  [   92.044030] CPU: 1 PID: 682 Comm: test_progs Tainted: G   O   5.13.0-53301-ge6c08cb33a30-dirty #87
  [   92.045542] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
  [   92.046785] Call Trace:
  [   92.047171]  ? __bpf_prog_run_args64+0xc0/0xc0
  [   92.047773]  ? __bpf_prog_run_args32+0x8b/0xb0
  [   92.048389]  ? __bpf_prog_run_args64+0xc0/0xc0
  [   92.049019]  ? ktime_get+0x117/0x130
  [...] // few hundred [similar] lines more
  [   92.659025]  ? ktime_get+0x117/0x130
  [   92.659845]  ? __bpf_prog_run_args64+0xc0/0xc0
  [   92.660738]  ? __bpf_prog_run_args32+0x8b/0xb0
  [   92.661528]  ? __bpf_prog_run_args64+0xc0/0xc0
  [   92.662378]  ? print_usage_bug+0x50/0x50
  [   92.663221]  ? print_usage_bug+0x50/0x50
  [   92.664077]  ? bpf_ksym_find+0x9c/0xe0
  [   92.664887]  ? ktime_get+0x117/0x130
  [   92.665624]  ? kernel_text_address+0xf5/0x100
  [   92.666529]  ? __kernel_text_address+0xe/0x30
  [   92.667725]  ? unwind_get_return_address+0x2f/0x50
  [   92.668854]  ? ___bpf_prog_run+0x15d4/0x2e20
  [   92.670185]  ? ktime_get+0x117/0x130
  [   92.671130]  ? __bpf_prog_run_args64+0xc0/0xc0
  [   92.672020]  ? __bpf_prog_run_args32+0x8b/0xb0
  [   92.672860]  ? __bpf_prog_run_args64+0xc0/0xc0
  [   92.675159]  ? ktime_get+0x117/0x130
  [   92.677074]  ? lock_is_held_type+0xd5/0x130
  [   92.678662]  ? ___bpf_prog_run+0x15d4/0x2e20
  [   92.680046]  ? ktime_get+0x117/0x130
  [   92.681285]  ? __bpf_prog_run32+0x6b/0x90
  [   92.682601]  ? __bpf_prog_run64+0x90/0x90
  [   92.683636]  ? lock_downgrade+0x370/0x370
  [   92.684647]  ? mark_held_locks+0x44/0x90
  [   92.685652]  ? ktime_get+0x117/0x130
  [   92.686752]  ? lockdep_hardirqs_on+0x79/0x100
  [   92.688004]  ? ktime_get+0x117/0x130
  [   92.688573]  ? __cant_migrate+0x2b/0x80
  [   92.689192]  ? bpf_test_run+0x2f4/0x510
  [   92.689869]  ? bpf_test_timer_continue+0x1c0/0x1c0
  [   92.690856]  ? rcu_read_lock_bh_held+0x90/0x90
  [   92.691506]  ? __kasan_slab_alloc+0x61/0x80
  [   92.692128]  ? eth_type_trans+0x128/0x240
  [   92.692737]  ? __build_skb+0x46/0x50
  [   92.693252]  ? bpf_prog_test_run_skb+0x65e/0xc50
  [   92.693954]  ? bpf_prog_test_run_raw_tp+0x2d0/0x2d0
  [   92.694639]  ? __fget_light+0xa1/0x100
  [   92.695162]  ? bpf_prog_inc+0x23/0x30
  [   92.695685]  ? __sys_bpf+0xb40/0x2c80
  [   92.696324]  ? bpf_link_get_from_fd+0x90/0x90
  [   92.697150]  ? mark_held_locks+0x24/0x90
  [   92.698007]  ? lockdep_hardirqs_on_prepare+0x124/0x220
  [   92.699045]  ? finish_task_switch+0xe6/0x370
  [   92.700072]  ? lockdep_hardirqs_on+0x79/0x100
  [   92.701233]  ? finish_task_switch+0x11d/0x370
  [   92.702264]  ? __switch_to+0x2c0/0x740
  [   92.703148]  ? mark_held_locks+0x24/0x90
  [   92.704155]  ? __x64_sys_bpf+0x45/0x50
  [   92.705146]  ? do_syscall_64+0x35/0x80
  [   92.706953]  ? entry_SYSCALL_64_after_hwframe+0x44/0xae
  [...]

Turns out that the program rejection from e411901c0b77 ("bpf: allow for tailcalls
in BPF subprograms for x64 JIT") is buggy since env->prog->aux->tail_call_reachable
is never true. Commit ebf7d1f508a7 ("bpf, x64: rework pro/epilogue and tailcall
handling in JIT") added a tracker into check_max_stack_depth() which propagates
the tail_call_reachable condition throughout the subprograms. This info is then
assigned to the subprogram's func[i]->aux->tail_call_reachable. However, in the
case of the rejection check upon JIT failure, env->prog->aux->tail_call_reachable
is used. func[0]->aux->tail_call_reachable which represents the main program's
information did not propagate this to the outer env->prog->aux, though. Add this
propagation into check_max_stack_depth() where it needs to belong so that the
check can be done reliably.

Fixes: ebf7d1f508a7 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT")
Fixes: e411901c0b77 ("bpf: allow for tailcalls in BPF subprograms for x64 JIT")
Co-developed-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/618c34e3163ad1a36b1e82377576a6081e182f25.1626123173.git.daniel@iogearbox.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, test: fix NULL pointer dereference on invalid expected_attach_type

[ Upstream commit 5e21bb4e812566aef86fbb77c96a4ec0782286e4 ]

These two types of XDP progs (BPF_XDP_DEVMAP, BPF_XDP_CPUMAP) will not be
executed directly in the driver, therefore we should also not directly
run them from here. To run in these two situations, there must be further
preparations done, otherwise these may cause a kernel panic.

For more details, see also dev_xdp_attach().

  [   46.982479] BUG: kernel NULL pointer dereference, address: 0000000000000000
  [   46.984295] #PF: supervisor read access in kernel mode
  [   46.985777] #PF: error_code(0x0000) - not-present page
  [   46.987227] PGD 800000010dca4067 P4D 800000010dca4067 PUD 10dca6067 PMD 0
  [   46.989201] Oops: 0000 [#1] SMP PTI
  [   46.990304] CPU: 7 PID: 562 Comm: a.out Not tainted 5.13.0+ #44
  [   46.992001] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/24
  [   46.995113] RIP: 0010:___bpf_prog_run+0x17b/0x1710
  [   46.996586] Code: 49 03 14 cc e8 76 f6 fe ff e9 ad fe ff ff 0f b6 43 01 48 0f bf 4b 02 48 83 c3 08 89 c2 83 e0 0f c0 ea 04 02
  [   47.001562] RSP: 0018:ffffc900005afc58 EFLAGS: 00010246
  [   47.003115] RAX: 0000000000000000 RBX: ffffc9000023f068 RCX: 0000000000000000
  [   47.005163] RDX: 0000000000000000 RSI: 0000000000000079 RDI: ffffc900005afc98
  [   47.007135] RBP: 0000000000000000 R08: ffffc9000023f048 R09: c0000000ffffdfff
  [   47.009171] R10: 0000000000000001 R11: ffffc900005afb40 R12: ffffc900005afc98
  [   47.011172] R13: 0000000000000001 R14: 0000000000000001 R15: ffffffff825258a8
  [   47.013244] FS:  00007f04a5207580(0000) GS:ffff88842fdc0000(0000) knlGS:0000000000000000
  [   47.015705] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [   47.017475] CR2: 0000000000000000 CR3: 0000000100182005 CR4: 0000000000770ee0
  [   47.019558] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [   47.021595] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [   47.023574] PKRU: 55555554
  [   47.024571] Call Trace:
  [   47.025424]  __bpf_prog_run32+0x32/0x50
  [   47.026296]  ? printk+0x53/0x6a
  [   47.027066]  ? ktime_get+0x39/0x90
  [   47.027895]  bpf_test_run.cold.28+0x23/0x123
  [   47.028866]  ? printk+0x53/0x6a
  [   47.029630]  bpf_prog_test_run_xdp+0x149/0x1d0
  [   47.030649]  __sys_bpf+0x1305/0x23d0
  [   47.031482]  __x64_sys_bpf+0x17/0x20
  [   47.032316]  do_syscall_64+0x3a/0x80
  [   47.033165]  entry_SYSCALL_64_after_hwframe+0x44/0xae
  [   47.034254] RIP: 0033:0x7f04a51364dd
  [   47.035133] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 48
  [   47.038768] RSP: 002b:00007fff8f9fc518 EFLAGS: 00000213 ORIG_RAX: 0000000000000141
  [   47.040344] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f04a51364dd
  [   47.041749] RDX: 0000000000000048 RSI: 0000000020002a80 RDI: 000000000000000a
  [   47.043171] RBP: 00007fff8f9fc530 R08: 0000000002049300 R09: 0000000020000100
  [   47.044626] R10: 0000000000000004 R11: 0000000000000213 R12: 0000000000401070
  [   47.046088] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
  [   47.047579] Modules linked in:
  [   47.048318] CR2: 0000000000000000
  [   47.049120] ---[ end trace 7ad34443d5be719a ]---
  [   47.050273] RIP: 0010:___bpf_prog_run+0x17b/0x1710
  [   47.051343] Code: 49 03 14 cc e8 76 f6 fe ff e9 ad fe ff ff 0f b6 43 01 48 0f bf 4b 02 48 83 c3 08 89 c2 83 e0 0f c0 ea 04 02
  [   47.054943] RSP: 0018:ffffc900005afc58 EFLAGS: 00010246
  [   47.056068] RAX: 0000000000000000 RBX: ffffc9000023f068 RCX: 0000000000000000
  [   47.057522] RDX: 0000000000000000 RSI: 0000000000000079 RDI: ffffc900005afc98
  [   47.058961] RBP: 0000000000000000 R08: ffffc9000023f048 R09: c0000000ffffdfff
  [   47.060390] R10: 0000000000000001 R11: ffffc900005afb40 R12: ffffc900005afc98
  [   47.061803] R13: 0000000000000001 R14: 0000000000000001 R15: ffffffff825258a8
  [   47.063249] FS:  00007f04a5207580(0000) GS:ffff88842fdc0000(0000) knlGS:0000000000000000
  [   47.065070] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [   47.066307] CR2: 0000000000000000 CR3: 0000000100182005 CR4: 0000000000770ee0
  [   47.067747] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [   47.069217] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [   47.070652] PKRU: 55555554
  [   47.071318] Kernel panic - not syncing: Fatal exception
  [   47.072854] Kernel Offset: disabled
  [   47.073683] ---[ end Kernel panic - not syncing: Fatal exception ]---

Fixes: 9216477449f3 ("bpf: cpumap: Add the possibility to attach an eBPF program to cpumap")
Fixes: fbee97feed9b ("bpf: Add support to attach bpf program to a devmap entry")
Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: David Ahern <dsahern@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210708080409.73525-1-xuanzhuo@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rt5631: Fix regcache sync errors on resume

[ Upstream commit c71f78a662611fe2c67f3155da19b0eff0f29762 ]

The ALC5631 does not like multi-write accesses, avoid them. This fixes:

rt5631 4-001a: Unable to sync registers 0x3a-0x3c. -121

errors on resume from suspend (and all registers after the registers in
the error not being synced).

Inspired by commit 2d30e9494f1e ("ASoC: rt5651: Fix regcache sync errors
on resume") from Hans de Geode, which fixed the same errors on ALC5651.

Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Link: https://lore.kernel.org/r/20210712005011.28536-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: mediatek: fix fifo rx mode

[ Upstream commit 3a70dd2d050331ee4cf5ad9d5c0a32d83ead9a43 ]

In FIFO mode were two problems:
- RX mode was never handled and
- in this case the tx_buf pointer was NULL and caused an exception

fix this by handling RX mode in mtk_spi_fifo_transfer

Fixes: a568231f4632 ("spi: mediatek: Add spi bus for Mediatek MT8173")
Signed-off-by: Peter Hess <peter.hess@ph-home.de>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20210706121609.680534-1-linux@fw-web.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: hi6421: Fix getting wrong drvdata

[ Upstream commit 1c73daee4bf30ccdff5e86dc400daa6f74735da5 ]

Since config.dev = pdev->dev.parent in current code, so
dev_get_drvdata(rdev->dev.parent) call in hi6421_regulator_enable
returns the drvdata of the mfd device rather than the regulator. Fix it.

This was broken while converting to use simplified DT parsing because the
config.dev changed from pdev->dev to pdev->dev.parent for parsing the
parent's of_node.

Fixes: 29dc269a85ef ("regulator: hi6421: Convert to use simplified DT parsing")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210630095959.2411543-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: hi6421: Use correct variable type for regmap api val argument

[ Upstream commit ae60e6a9d24e89a74e2512204ad04de94921bdd2 ]

Use unsigned int instead of u32 for regmap_read/regmap_update_bits val
argument.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210619124133.4096683-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: stm32: fixes pm_runtime calls in probe/remove

[ Upstream commit 7999d2555c9f879d006ea8469d74db9cdb038af0 ]

Add pm_runtime calls in probe/probe error path and remove
in order to be consistent in all places in ordering and
ensure that pm_runtime is disabled prior to resources used
by the SPI controller.

This patch also fixes the 2 following warnings on driver remove:
WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:594 clk_core_disable_lock+0x18/0x24
WARNING: CPU: 0 PID: 743 at drivers/clk/clk.c:476 clk_unprepare+0x24/0x2c

Fixes: 038ac869c9d2 ("spi: stm32: add runtime PM support")

Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1625646426-5826-2-git-send-email-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: imx: add a check for speed_hz before calculating the clock

[ Upstream commit 4df2f5e1372e9eec8f9e1b4a3025b9be23487d36 ]

When some drivers use spi to send data, spi_transfer->speed_hz is
not assigned. If spidev->max_speed_hz is not assigned as well, it
will cause an error in configuring the clock.
Add a check for these two values before configuring the clock. An
error will be returned when they are not assigned.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Link: https://lore.kernel.org/r/20210408103347.244313-2-xiaoning.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: wm_adsp: Correct wm_coeff_tlv_get handling

[ Upstream commit dd6fb8ff2210f74b056bf9234d0605e8c26a8ac0 ]

When wm_coeff_tlv_get was updated it was accidentally switch to the _raw
version of the helper causing it to ignore the current DSP state it
should be checking. Switch the code back to the correct helper so that
users can't read the controls when they arn't available.

Fixes: 73ecf1a673d3 ("ASoC: wm_adsp: Correct cache handling of new kernel control API")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210626155941.12251-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf sched: Fix record failure when CONFIG_SCHEDSTATS is not set

[ Upstream commit b0f008551f0bf4d5f6db9b5f0e071b02790d6a2e ]

The tracepoints trace_sched_stat_{wait, sleep, iowait} are not exposed to user
if CONFIG_SCHEDSTATS is not set, "perf sched record" records the three events.
As a result, the command fails.

Before:

  #perf sched record sleep 1
  event syntax error: 'sched:sched_stat_wait'
                       \___ unknown tracepoint

  Error:  File /sys/kernel/tracing/events/sched/sched_stat_wait not found.
  Hint:   Perhaps this kernel misses some CONFIG_ setting to enable this feature?.

  Run 'perf list' for a list of valid events

   Usage: perf record [<options>] [<command>]
      or: perf record [<options>] -- <command> [<options>]

      -e, --event <event>   event selector. use 'perf list' to list available events

Solution:
  Check whether schedstat tracepoints are exposed. If no, these events are not recorded.

After:
  # perf sched record sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.163 MB perf.data (1091 samples) ]
  # perf sched report
  run measurement overhead: 4736 nsecs
  sleep measurement overhead: 9059979 nsecs
  the run test took 999854 nsecs
  the sleep test took 8945271 nsecs
  nr_run_events:        716
  nr_sleep_events:      785
  nr_wakeup_events:     0
  ...
  ------------------------------------------------------------

Fixes: 2a09b5de235a6 ("sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Yafang Shao <laoar.shao@gmail.com>
Link: http://lore.kernel.org/lkml/20210713112358.194693-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf data: Close all files in close_dir()

[ Upstream commit d4b3eedce151e63932ce4a00f1d0baa340a8b907 ]

When using 'perf report' in directory mode, the first file is not closed
on exit, causing a memory leak.

The problem is caused by the iterating variable never reaching 0.

Fixes: 145520631130bd64 ("perf data: Add perf_data__(create_dir|close_dir) functions")
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Link: http://lore.kernel.org/lkml/20210716141122.858082-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf probe-file: Delete namelist in del_events() on the error path

[ Upstream commit e0fa7ab42232e742dcb3de9f3c1f6127b5adc019 ]

ASan reports some memory leaks when running:

  # perf test "42: BPF filter"

This second leak is caused by a strlist not being dellocated on error
inside probe_file__del_events.

This patch adds a goto label before the deallocation and makes the error
path jump to it.

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: e7895e422e4da63d ("perf probe: Split del_perf_probe_events()")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/174963c587ae77fa108af794669998e4ae558338.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf lzma: Close lzma stream on exit

[ Upstream commit f8cbb0f926ae1e1fb5f9e51614e5437560ed4039 ]

ASan reports memory leaks when running:

  # perf test "88: Check open filename arg using perf trace + vfs_getname"

One of these is caused by the lzma stream never being closed inside
lzma_decompress_to_file().

This patch adds the missing lzma_end().

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: 80a32e5b498a7547 ("perf tools: Add lzma decompression support for kernel module")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/aaf50bdce7afe996cfc06e1bbb36e4a2a9b9db93.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf script: Fix memory 'threads' and 'cpus' leaks on exit

[ Upstream commit faf3ac305d61341c74e5cdd9e41daecce7f67bfe ]

ASan reports several memory leaks while running:

  # perf test "82: Use vfs_getname probe to get syscall args filenames"

Two of these are caused by some refcounts not being decreased on
perf-script exit, namely script.threads and script.cpus.

This patch adds the missing __put calls in a new perf_script__exit
function, which is called at the end of cmd_script.

This patch concludes the fixes of all remaining memory leaks in perf
test "82: Use vfs_getname probe to get syscall args filenames".

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: cfc8874a48599249 ("perf script: Process cpu/threads maps")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/5ee73b19791c6fa9d24c4d57f4ac1a23609400d7.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf report: Free generated help strings for sort option

[ Upstream commit a37338aad8c4d8676173ead14e881d2ec308155c ]

ASan reports the memory leak of the strings allocated by sort_help() when
running perf report.

This patch changes the returned pointer to char* (instead of const
char*), saves it in a temporary variable, and finally deallocates it at
function exit.

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: 702fb9b415e7c99b ("perf report: Show all sort keys in help output")
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/a38b13f02812a8a6759200b9063c6191337f44d4.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf env: Fix memory leak of cpu_pmu_caps

[ Upstream commit da6b7c6c0626901428245f65712385805e42eba6 ]

ASan reports memory leaks while running:

 # perf test "83: Zstd perf.data compression/decompression"

The first of the leaks is caused by env->cpu_pmu_caps not being freed.

This patch adds the missing (z)free inside perf_env__exit.

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: 6f91ea283a1ed23e ("perf header: Support CPU PMU capabilities")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/6ba036a8220156ec1f3d6be3e5d25920f6145028.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf test maps__merge_in: Fix memory leak of maps

[ Upstream commit 244d1797c8c8e850b8de7992af713aa5c70d5650 ]

ASan reports a memory leak when running:

  # perf test "65: maps__merge_in"

This is the second and final patch addressing these memory leaks.

This time, the problem is simply that the maps object is never
destructed.

This patch adds the missing maps__exit call.

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: 79b6bb73f888933c ("perf maps: Merge 'struct maps' with 'struct map_groups'")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/a1a29b97a58738987d150e94d4ebfad0282fb038.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf dso: Fix memory leak in dso__new_map()

[ Upstream commit 581e295a0f6b5c2931d280259fbbfff56959faa9 ]

ASan reports a memory leak when running:

  # perf test "65: maps__merge_in".

The causes of the leaks are two, this patch addresses only the first
one, which is related to dso__new_map().

The bug is that dso__new_map() creates a new dso but never decreases the
refcount it gets from creating it.

This patch adds the missing dso__put().

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: d3a7c489c7fd2463 ("perf tools: Reference count struct dso")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/60bfe0cd06e89e2ca33646eb8468d7f5de2ee597.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf test event_update: Fix memory leak of evlist

[ Upstream commit fc56f54f6fcd5337634f4545af6459613129b432 ]

ASan reports a memory leak when running:

  # perf test "49: Synthesize attr update"

Caused by evlist not being deleted.

This patch adds the missing evlist__delete and removes the
perf_cpu_map__put since it's already being deleted by evlist__delete.

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: a6e5281780d1da65 ("perf tools: Add event_update event unit type")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/f7994ad63d248f7645f901132d208fadf9f2b7e4.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf test session_topology: Delete session->evlist

[ Upstream commit 233f2dc1c284337286f9a64c0152236779a42f6c ]

ASan reports a memory leak related to session->evlist while running:

  # perf test "41: Session topology".

When perf_data is in write mode, session->evlist is owned by the caller,
which should also take care of deleting it.

This patch adds the missing evlist__delete().

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: c84974ed9fb67293 ("perf test: Add entry to test cpu topology")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/822f741f06eb25250fb60686cf30a35f447e9e91.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf env: Fix sibling_dies memory leak

[ Upstream commit 42db3d9ded555f7148b5695109a7dc8d66f0dde4 ]

ASan reports a memory leak in perf_env while running:

  # perf test "41: Session topology"

Caused by sibling_dies not being freed.

This patch adds the required free.

Fixes: acae8b36cded0ee6 ("perf header: Add die information in CPU topology")
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/2140d0b57656e4eb9021ca9772250c24c032924b.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf probe: Fix dso->nsinfo refcounting

[ Upstream commit dedeb4be203b382ba7245d13079bc3b0f6d40c65 ]

ASan reports a memory leak of nsinfo during the execution of:

 # perf test "31: Lookup mmap thread".

The leak is caused by a refcounted variable being replaced without
dropping the refcount.

This patch makes sure that the refcnt of nsinfo is decreased whenever
a refcounted variable is replaced with a new value.

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: 544abd44c7064c8a ("perf probe: Allow placing uprobes in alternate namespaces.")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/55223bc8821b34ccb01f92ef1401c02b6a32e61f.1626343282.git.rickyman7@gmail.com
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>