Baisong Zhong [Sun, 20 Nov 2022 06:59:18 +0000 (06:59 +0000)]
media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()
Wei Chen reports a kernel bug as blew:
general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
...
Call Trace:
<TASK>
__i2c_transfer+0x77e/0x1930 drivers/i2c/i2c-core-base.c:2109
i2c_transfer+0x1d5/0x3d0 drivers/i2c/i2c-core-base.c:2170
i2cdev_ioctl_rdwr+0x393/0x660 drivers/i2c/i2c-dev.c:297
i2cdev_ioctl+0x75d/0x9f0 drivers/i2c/i2c-dev.c:458
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl+0xfb/0x170 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd834a8bded
In az6027_i2c_xfer(), if msg[i].addr is 0x99,
a null-ptr-deref will caused when accessing msg[i].buf.
For msg[i].len is 0 and msg[i].buf is null.
Fix this by checking msg[i].len in az6027_i2c_xfer().
Link: https://lore.kernel.org/lkml/CAO4mrfcPHB5aQJO=mpqV+p8mPLNg-Fok0gw8gZ=zemAfMGTzMg@mail.gmail.com/
Link: https://lore.kernel.org/linux-media/20221120065918.2160782-1-zhongbaisong@huawei.com
Fixes:
76f9a820c867 ("V4L/DVB: AZ6027: Initial import of the driver")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Chen Zhongjin [Tue, 8 Nov 2022 03:30:05 +0000 (03:30 +0000)]
media: dvb-core: Fix ignored return value in dvb_register_frontend()
In dvb_register_frontend(), dvb_register_device() is possible to fail
but its return value is ignored.
It will cause use-after-free when module is removed, because in
dvb_unregister_frontend() it tries to unregister a not registered
device.
BUG: KASAN: use-after-free in dvb_remove_device+0x18b/0x1f0 [dvb_core]
Read of size 4 at addr
ffff88800dff4824 by task rmmod/428
CPU: 3 PID: 428 Comm: rmmod
Call Trace:
<TASK>
...
dvb_remove_device+0x18b/0x1f0 [dvb_core]
dvb_unregister_frontend+0x7b/0x130 [dvb_core]
vidtv_bridge_remove+0x6e/0x160 [dvb_vidtv_bridge]
...
Fix this by catching return value of dvb_register_device().
However the fe->refcount can't be put to zero immediately, because
there are still modules calling dvb_frontend_detach() when
dvb_register_frontend() fails.
Link: https://lore.kernel.org/linux-media/20221108033005.169095-1-chenzhongjin@huawei.com
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yuan Can [Tue, 27 Sep 2022 13:38:27 +0000 (14:38 +0100)]
media: dvb-usb: dib0700_devices: Remove unused struct dibx090p_adc
After commit
5e9c85d98337("[media] dib8096: enhancement"), no one use struct
dibx090p_adc, so remove it.
Link: https://lore.kernel.org/linux-media/20220927133827.99097-1-yuancan@huawei.com
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Gaosheng Cui [Tue, 20 Sep 2022 01:59:02 +0000 (02:59 +0100)]
media: dib0700: remove orphan dvb_usb_dib0700_ir_proto declaration
The dvb_usb_dib0700_ir_proto has been removed by
commit
0ffd1ab34a00 ("V4L/DVB: dib0700: properly implement IR
change_protocol"), so remove the orphan declaration.
Link: https://lore.kernel.org/linux-media/20220920015902.785337-1-cuigaosheng1@huawei.com
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Mazin Al Haddad [Wed, 24 Aug 2022 01:21:52 +0000 (02:21 +0100)]
media: dvb-usb: fix memory leak in dvb_usb_adapter_init()
Syzbot reports a memory leak in "dvb_usb_adapter_init()".
The leak is due to not accounting for and freeing current iteration's
adapter->priv in case of an error. Currently if an error occurs,
it will exit before incrementing "num_adapters_initalized",
which is used as a reference counter to free all adap->priv
in "dvb_usb_adapter_exit()". There are multiple error paths that
can exit from before incrementing the counter. Including the
error handling paths for "dvb_usb_adapter_stream_init()",
"dvb_usb_adapter_dvb_init()" and "dvb_usb_adapter_frontend_init()"
within "dvb_usb_adapter_init()".
This means that in case of an error in any of these functions the
current iteration is not accounted for and the current iteration's
adap->priv is not freed.
Fix this by freeing the current iteration's adap->priv in the
"stream_init_err:" label in the error path. The rest of the
(accounted for) adap->priv objects are freed in dvb_usb_adapter_exit()
as expected using the num_adapters_initalized variable.
Syzbot report:
BUG: memory leak
unreferenced object 0xffff8881172f1a00 (size 512):
comm "kworker/0:2", pid 139, jiffies
4294994873 (age 10.960s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
ffffffff844af012>] dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:75 [inline]
[<
ffffffff844af012>] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:184 [inline]
[<
ffffffff844af012>] dvb_usb_device_init.cold+0x4e5/0x79e drivers/media/usb/dvb-usb/dvb-usb-init.c:308
[<
ffffffff830db21d>] dib0700_probe+0x8d/0x1b0 drivers/media/usb/dvb-usb/dib0700_core.c:883
[<
ffffffff82d3fdc7>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
[<
ffffffff8274ab37>] call_driver_probe drivers/base/dd.c:542 [inline]
[<
ffffffff8274ab37>] really_probe.part.0+0xe7/0x310 drivers/base/dd.c:621
[<
ffffffff8274ae6c>] really_probe drivers/base/dd.c:583 [inline]
[<
ffffffff8274ae6c>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:752
[<
ffffffff8274af6a>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:782
[<
ffffffff8274b786>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:899
[<
ffffffff82747c87>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
[<
ffffffff8274b352>] __device_attach+0x122/0x260 drivers/base/dd.c:970
[<
ffffffff827498f6>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487
[<
ffffffff82745cdb>] device_add+0x5fb/0xdf0 drivers/base/core.c:3405
[<
ffffffff82d3d202>] usb_set_configuration+0x8f2/0xb80 drivers/usb/core/message.c:2170
[<
ffffffff82d4dbfc>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238
[<
ffffffff82d3f49c>] usb_probe_device+0x5c/0x140 drivers/usb/core/driver.c:293
[<
ffffffff8274ab37>] call_driver_probe drivers/base/dd.c:542 [inline]
[<
ffffffff8274ab37>] really_probe.part.0+0xe7/0x310 drivers/base/dd.c:621
[<
ffffffff8274ae6c>] really_probe drivers/base/dd.c:583 [inline]
[<
ffffffff8274ae6c>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:752
Link: https://syzkaller.appspot.com/bug?extid=f66dd31987e6740657be
Reported-and-tested-by: syzbot+f66dd31987e6740657be@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-media/20220824012152.539788-1-mazinalhaddad05@gmail.com
Signed-off-by: Mazin Al Haddad <mazinalhaddad05@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lin Ma [Sun, 7 Aug 2022 14:59:52 +0000 (15:59 +0100)]
media: dvbdev: adopts refcnt to avoid UAF
dvb_unregister_device() is known that prone to use-after-free.
That is, the cleanup from dvb_unregister_device() releases the dvb_device
even if there are pointers stored in file->private_data still refer to it.
This patch adds a reference counter into struct dvb_device and delays its
deallocation until no pointer refers to the object.
Link: https://lore.kernel.org/linux-media/20220807145952.10368-1-linma@zju.edu.cn
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
wangjianli [Sun, 24 Jul 2022 07:32:42 +0000 (08:32 +0100)]
media: media/dvb-frontends: fix repeated words in comments
Delete the redundant word 'in'.
Link: https://lore.kernel.org/linux-media/20220724073242.15279-1-wangjianli@cdjrlc.com
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
YongSu Yoo [Thu, 23 Jun 2022 10:35:43 +0000 (11:35 +0100)]
media: dvb_ringbuffer : Fix a bug in dvb_ringbuffer.c
The function dvb_ringbuffer_pkt_next in
/linux-next/drviers/media/dvb-core/dvb_ringbuffer.c,
which searches the idx of the next valid packet in the ring
buffer of the ca->slot_info[slot].rx_buffer at
/linux-next/drivers/media/dvb-core/dvb_ca_en50221.c,
has the following problem.
In calculating the amounts of the consumed address of the ring
buffer, if the read address(rbuf->pread) of the ring buffer is
smaller than the idx, the amounts of the searched address
should be (idx - rbuf->pread),
whereas if the read address(rbuf->pread) of the ring buffer is
larger than the idx, the amounts of the consumed address should
be (idx - rbuf->pread + rbug->size). But there exists an
incorrect logic that the rbug-size was not properly added on
(idx - rbug->pread) in the later case. With this commit, we
fixed this bug.
Link: https://lore.kernel.org/linux-media/20220623103543.4138-1-yongsuyoo0215@gmail.com
Signed-off-by: Yongsu Yoo <yongsuyoo0215@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lecopzer Chen [Mon, 16 May 2022 17:15:14 +0000 (18:15 +0100)]
media: mantis: Kconfig: add depends on DVB_CORE for MANTIS_CORE
MANTIS_CORE needs DVB_CORE, set 'depends on' explicitly
ERROR: modpost: "dvb_dmx_init" [drivers/media/pci/mantis/mantis_core.ko] undefined!
ERROR: modpost: "dvb_unregister_adapter" [drivers/media/pci/mantis/mantis_core.ko] undefined!
ERROR: modpost: "dvb_register_frontend" [drivers/media/pci/mantis/mantis_core.ko] undefined!
ERROR: modpost: "dvb_ca_en50221_camchange_irq" [drivers/media/pci/mantis/mantis_core.ko] undefined!
ERROR: modpost: "dvb_unregister_frontend" [drivers/media/pci/mantis/mantis_core.ko] undefined!
>> ERROR: modpost: "dvb_ca_en50221_camready_irq" [drivers/media/pci/mantis/mantis_core.ko] undefined!
>> ERROR: modpost: "dvb_frontend_detach" [drivers/media/pci/mantis/mantis_core.ko] undefined!
>> ERROR: modpost: "dvb_dmxdev_release" [drivers/media/pci/mantis/mantis_core.ko] undefined!
>> ERROR: modpost: "dvb_dmx_swfilter" [drivers/media/pci/mantis/mantis_core.ko] undefined!
Link: https://lore.kernel.org/linux-media/20220516171515.16404-2-lecopzer.chen@mediatek.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Keita Suzuki [Tue, 26 Apr 2022 05:29:19 +0000 (06:29 +0100)]
media: dvb-core: Fix double free in dvb_register_device()
In function dvb_register_device() -> dvb_register_media_device() ->
dvb_create_media_entity(), dvb->entity is allocated and initialized. If
the initialization fails, it frees the dvb->entity, and return an error
code. The caller takes the error code and handles the error by calling
dvb_media_device_free(), which unregisters the entity and frees the
field again if it is not NULL. As dvb->entity may not NULLed in
dvb_create_media_entity() when the allocation of dvbdev->pad fails, a
double free may occur. This may also cause an Use After free in
media_device_unregister_entity().
Fix this by storing NULL to dvb->entity when it is freed.
Link: https://lore.kernel.org/linux-media/20220426052921.2088416-1-keitasuzuki.park@sslab.ics.keio.ac.jp
Fixes:
fcd5ce4b3936 ("media: dvb-core: fix a memory leak bug")
Cc: stable@vger.kernel.org
Cc: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Colin Ian King [Sun, 24 Apr 2022 15:47:20 +0000 (16:47 +0100)]
media: dvbdev: remove redundant initialization of variable ret
Variable ret is being ininitialized with a value that is never read.
The ininitializtion is redundant and can be removed. Move the variable
to the scope it is required.
Link: https://lore.kernel.org/linux-media/20220424154720.1356873-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yan Lei [Sun, 10 Apr 2022 06:19:25 +0000 (07:19 +0100)]
media: dvb-frontends: fix leak of memory fw
Link: https://lore.kernel.org/linux-media/20220410061925.4107-1-chinayanlei2002@163.com
Signed-off-by: Yan Lei <yan_lei@dahuatech.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Wan Jiabing [Fri, 8 Apr 2022 09:28:30 +0000 (10:28 +0100)]
media: dvb-frontends: clean up unneeded else
Clean up unneeded 'else'.
Link: https://lore.kernel.org/linux-media/20220408092831.45755-1-wanjiabing@vivo.com
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Robert Schlabbach [Fri, 21 Jan 2022 21:18:49 +0000 (21:18 +0000)]
media: dvb-core: Enhance shared multi-frontend support
Drivers for devices with multiple frontends which cannot be used
concurrently due to hardware limitations which enforce that restriction
by setting the mfe_shared field to 1 exhibit rather unfriendly behavior
towards applications: The unavailable frontend devices cannot be opened
at all, not even for read-only access to query information. Even worse,
any open call is blocked for 5 seconds by default.
Allow drivers for such devices to behave like regular busy frontend
devices instead, i.e. still allowing concurrent read access to the
unavailable frontend and denying concurrent write access with -EBUSY
without delay.
This patch does not alter the behavior of any existing driver to avoid
regressions. Driver developers who wish to take advantage of this must
ensure their driver can handle all read-only accesses to the unavailable
frontend, and indicate the capability by setting the mfe_shared field to
2 instead of 1.
Add a check to dvb-usb-init.c when automatically setting the mfe_shared
field that when a driver has already set the field to 2, it is not
overwritten.
Document the additional capability in the code comment about mfe_shared.
Link: https://lore.kernel.org/linux-media/trinity-22c77578-26b0-4867-9ff7-2668e5d22c64-1642799929896@3c-app-gmx-bap04
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Tested-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Robert Schlabbach [Fri, 14 Jan 2022 07:43:48 +0000 (07:43 +0000)]
media: dvb: add DVB-C2 and DVB-S2X parameter values
Extend the DVB frontend parameter enums with additional values specified
by the DVB-C2 (ETSI EN 302 769) and DVB-S2X (ETSI EN 302 307-2)
standards to be ready for frontend drivers for such receivers.
While most parameters will be "read-only" due to being autodetected by
the receiver and only being reported back for informational purposes,
the addition of SYS_DVBC2 to the delivery systems enum is required,
because there are DVB-C2 capable receivers which are not capable of
DVB-C/C2 autodetection and thus need this enum value to be explicitly
instructed to search for a DVB-C2 signal.
As for DVB-S2X, as that is an extension to DVB-S2, the same delivery
system enum as for DVB-S2 can be used.
Add the additional enum values and comments to the documentation.
Link: https://lore.kernel.org/linux-media/trinity-1b7c5a66-85d4-4595-a690-0fde965d49b3-1642146228587@3c-app-gmx-bap69
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Robert Schlabbach [Wed, 12 Jan 2022 03:33:41 +0000 (03:33 +0000)]
media: dvb_frontend: add missing DSS switch cases
While the documentation mentions the delivery system DSS as a satellite
system, it was missing from all but one switch statement in the DVB
frontend code, leading to tuning failures, because the frequency was not
correctly handled as being in kHz rather than Hz.
Add the missing switch cases so that DSS is handled like the other
satellite systems. For the rolloff, assume 0.20 as per one publication
found via Internet search.
Link: https://lore.kernel.org/linux-media/trinity-5f5afda9-657a-4a91-bf15-842f4f249535-1641958421391@3c-app-gmx-bap21
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Chuck Ritola [Fri, 31 Dec 2021 03:53:27 +0000 (03:53 +0000)]
media: dvb-frontends: a8293: fix LNB powerup failure in PCTV 461e
Fixes a8293 failure to raise LNB voltage in PCTV 461e DVB-S2 Stick
affecting multiple users over several years as found here:
http://www.linuxquestions.org/questions/linux-hardware-18/pctv-dvb-s2-stick-461e-not-feeding-lnb-
4175529374/
https://www.linuxtv.org/wiki/index.php/Pinnacle_PCTV_DVB-S2_Stick_(461e)
https://github.com/OpenELEC/OpenELEC.tv/issues/3731
Caused by vIN undervoltage lockout (status register bit 7) when raising LNB to 18V.
Addressed by using the higher-precision voltages available on the a8293 to gradually
increase (slew) the voltage when voltage increases are requested.
Adds volt_slew_nanos_per_mv to a8293_platform_data struct for specifying slew rate.
If value is <1 or non-sane (>1600), the original no-slew version for a8293_set_voltage is used.
Link: https://lore.kernel.org/linux-media/20211231035326.6759-1-cjritola@gmail.com
[mchehab: fixed some coding style issues]
Signed-off-by: Chuck Ritola <cjritola@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Geert Uytterhoeven [Fri, 17 Dec 2021 09:08:52 +0000 (09:08 +0000)]
media: dvb_ringbuffer: Fix typo in dvb_ringbuffer_pkt_write() kerneldoc
There is no such error code EVINAL.
Link: https://lore.kernel.org/linux-media/270f5b7f79a24dc1a3e81d94f6f54fc0f08daf56.1639732105.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lukas Bulwahn [Wed, 16 Nov 2022 09:40:06 +0000 (09:40 +0000)]
media: i2c: refer to config VIDEO_DEV to make ov08x40 image sensor driver usable
Commit
9958d30f38b9 ("media: Kconfig: cleanup VIDEO_DEV dependencies")
removes the config VIDEO_V4L2 as it is merged with config VIDEO_DEV.
Long after this change, commit
38fc5136ac16 ("media: i2c: Add ov08x40 image
sensor driver") introduces and refers to the removed config VIDEO_V4L2,
basically making this driver impossible to build, test and use due to
dependencies that cannot be met.
Refer to config VIDEO_DEV instead to make this driver usable.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Fixes:
38fc5136ac16 ("media: i2c: Add ov08x40 image sensor driver")
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Kieran Bingham [Mon, 21 Nov 2022 17:39:50 +0000 (17:39 +0000)]
media: i2c: ov08x40: Make remove callback return void
In commit
ed5c2f5fd10d ("i2c: Make remove callback return void") drivers
were updated to remove the return value of the remove callback, and
return void.
The OV08x40 was added after this commit but was not compile tested at
the time due to a KConfig issue, and this warning was missed.
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
38fc5136ac16 ("media: i2c: Add ov08x40 image sensor driver")
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Benjamin Mugnier [Thu, 10 Nov 2022 13:41:02 +0000 (13:41 +0000)]
media: i2c: st-vgxy61: Fix smatch warnings
Fix some 'vgxy61_write_reg' return vars not being signed int.
Fix 'expo_long_max' not being initialized.
Handle 'pm_runtime_get_sync' call that can return 1.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Benjamin Mugnier [Mon, 7 Nov 2022 13:19:45 +0000 (13:19 +0000)]
media: Documentation: st-vgxy61: Fix driver specific documentation not being included in the index
Fixes:
2378be892b6f ("media: Documentation: Add ST VGXY61 driver documentation")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Benjamin Mugnier [Mon, 7 Nov 2022 13:19:44 +0000 (13:19 +0000)]
media: Documentation: st-vgxy61: Remove quotes around 'No HDR' identifier
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Benjamin Mugnier [Mon, 7 Nov 2022 13:19:43 +0000 (13:19 +0000)]
media: Documentation: st-vgxy61: Limit driver specific documentation to 80 characters
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Wed, 23 Nov 2022 01:09:43 +0000 (01:09 +0000)]
media: platform: Add Renesas RZ/G2L CRU driver
Add v4l driver for Renesas RZ/G2L Camera data Receiving Unit.
Based on a patch in the BSP by Hien Huynh
<hien.huynh.px@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Wed, 23 Nov 2022 01:09:42 +0000 (01:09 +0000)]
media: platform: Add Renesas RZ/G2L MIPI CSI-2 receiver driver
Add MIPI CSI-2 receiver driver for Renesas RZ/G2L. The MIPI
CSI-2 is part of the CRU module found on RZ/G2L family.
Based on a patch in the BSP by Hien Huynh
<hien.huynh.px@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Wed, 2 Nov 2022 00:43:27 +0000 (00:43 +0000)]
media: dt-bindings: Document Renesas RZ/G2L CRU block
Document the CRU block found on Renesas RZ/G2L (and alike) SoCs.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lad Prabhakar [Wed, 2 Nov 2022 00:43:26 +0000 (00:43 +0000)]
media: dt-bindings: Document Renesas RZ/G2L CSI-2 block
Document the CSI-2 block which is part of CRU found in Renesas
RZ/G2L (and alike) SoCs.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jacopo Mondi [Mon, 21 Nov 2022 17:48:33 +0000 (17:48 +0000)]
media: ar0521: Tab-align definitions
Align some register and constant definitions using tab in place of
mixed tab+spaces.
Cosmetic change only.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jacopo Mondi [Fri, 4 Nov 2022 14:24:52 +0000 (14:24 +0000)]
media: ar0521: Rework startup sequence
The ar0521_write_mode() function explicitly programs the exposure time
register and the test pattern register, which are now setup by the call
to __v4l2_ctrl_handler_setup() in ar0521_set_stream().
Removing those register writes from ar0521_write_mode() reduces the
function to two operations: geometry configuration and pll
configuration.
Move geomerty configuration in the ar0521_set_stream() caller and rename
ar0521_write_mode() to ar0521_pll_config().
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jacopo Mondi [Fri, 4 Nov 2022 14:24:51 +0000 (14:24 +0000)]
media: ar0521: Setup controls at s_stream time
Setup all the registered controls at s_stream(1) time instead of
manually configure gains.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jacopo Mondi [Fri, 4 Nov 2022 14:24:50 +0000 (14:24 +0000)]
media: ar0521: Adjust exposure and blankings limits
Adjust the control limits for V4L2_CID_VBLANK, V4L2_CID_HBLANK and
V4L2_CID_EXPOSURE when a new format is applied to the sensor.
Update the exposure control limits when a new blanking value is
applied and change the controls initialization to use valid values for the
default format.
The exposure control default value is changed to report the default
value of register 0x3012.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jacopo Mondi [Fri, 4 Nov 2022 14:24:49 +0000 (14:24 +0000)]
media: ar0521: Add LINK_FREQ control
Add support for V4L2_CID_LINK_FREQ which currently reports a single
hard-coded frequency which depends on the fixed pixel clock.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jacopo Mondi [Fri, 4 Nov 2022 14:24:48 +0000 (14:24 +0000)]
media: ar0521: Refuse unsupported controls
Refuse unsupported controls by returning -EINVAL in the s_ctrl
operation. While at it, remove a the default switch case in the first
switch as it effectively is now a no-op.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jacopo Mondi [Fri, 4 Nov 2022 14:24:47 +0000 (14:24 +0000)]
media: ar0521: Rework PLL computation
Rework the PLL computation procedure to take into account the currently
configured format bpp and the number of data lanes.
Comment the PLL configuration procedure with information provided by the
sensor chip manual and remove the hardcoded divider from the pixel clock
calculation.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jacopo Mondi [Fri, 4 Nov 2022 14:24:46 +0000 (14:24 +0000)]
media: ar0521: Set maximum resolution to 2592x1944
Change the largest visibile resolution to 2592x1944, which corresponds
to the active pixel array area size. Take into account the horizontal
and vertical limits when programming the visible sizes to skip
dummy/inactive pixels.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jacopo Mondi [Fri, 4 Nov 2022 14:24:45 +0000 (14:24 +0000)]
media: ar0521: Add V4L2_CID_ANALOG_GAIN
Add support for V4L2_CID_ANALOG_GAIN. The control programs the global
gain register which applies to all color channels.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jacopo Mondi [Fri, 4 Nov 2022 14:24:44 +0000 (14:24 +0000)]
media: ar0521: Implement enum_frame_sizes
Implement the enum_frame_size pad operation.
The sensor supports a continuous size range of resolutions.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Marek Vasut [Tue, 23 Aug 2022 22:22:16 +0000 (23:22 +0100)]
media: mt9p031: Increase post-reset delay
The MT9P006 sensor driver sporadically fails to probe because the sensor
responds with a NACK condition to I2C address on the bus during an attempt
to read the sensor MT9P031_CHIP_VERSION register in mt9p031_registered().
Neither the MT9P006 nor MT9P031 datasheets are clear on reset signal timing.
Older MT9M034 [1] datasheet provides those timing figures in Appendix-A and
indicates it is necessary to wait 850000 EXTCLK cycles before starting any
I2C communication.
Add such a delay, which does make the sporadic I2C NACK go away, so it is
likely similar constraint applies to this sensor.
[1] https://www.onsemi.com/pdf/datasheet/mt9m034-d.pdf
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Wed, 15 Jun 2022 22:14:06 +0000 (23:14 +0100)]
media: dt-bindings: Use new video interface bus type macros in examples
Now that a header exists with macros for the media interface bus-type
values, replace hardcoding numerical constants with the corresponding
macros in the DT binding examples.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Wed, 15 Jun 2022 22:14:05 +0000 (23:14 +0100)]
media: dt-bindings: media: Add macros for video interface bus types
Add a new dt-bindings/media/video-interfaces.h header that defines
macros corresponding to the bus types from media/video-interfaces.yaml.
This allows avoiding hardcoded constants in device tree sources.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Marek Vasut [Sun, 20 Nov 2022 14:13:04 +0000 (14:13 +0000)]
media: mt9p031: Drop bogus v4l2_subdev_get_try_crop() call from mt9p031_init_cfg()
The mt9p031_init_cfg() already calls __mt9p031_get_pad_crop(), which
correctly calls v4l2_subdev_get_try_crop() on V4L2_SUBDEV_FORMAT_TRY
or returns &mt9p031->crop on V4L2_SUBDEV_FORMAT_ACTIVE. No need to
call v4l2_subdev_get_try_crop() in mt9p031_init_cfg() again in case
of both V4L2_SUBDEV_FORMAT_TRY and V4L2_SUBDEV_FORMAT_ACTIVE.
This also fixes a splat generated by this call since commit
2ba3e38517f5a ("media: v4l: subdev: Fail graciously when getting try data for NULL state")
because v4l2_subdev_get_try_crop() is called with sd_state = NULL
in mt9p031_init_cfg().
Fixes:
69681cd041648 ("media: mt9p031: Move open subdev op init code into init_cfg")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Dave Stevenson [Wed, 5 Oct 2022 15:20:18 +0000 (16:20 +0100)]
media: i2c: ov9282: Add support for regulators.
The sensor takes 3 supply rails - AVDD, DVDD, and DOVDD.
Add hooks into the regulator framework for each of these
regulators.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Dave Stevenson [Wed, 5 Oct 2022 15:20:17 +0000 (16:20 +0100)]
media: dt-bindings: media: ovti,ov9282: Add optional regulators
The OV9282 image sensor takes 3 voltage supplies, so
define the relevant regulators.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Benjamin Mugnier [Mon, 7 Nov 2022 15:00:00 +0000 (15:00 +0000)]
media: i2c: st-vgxy61: Fix regulator counter underflow
Previously regulators were enabled on probe and never again.
However, as regulators are disabled on power off. After a second power off
the regulator counter will underflow. Plus regulators are not required
for probing the sensor, but for streaming.
Fix this by enabling regulators on power on to balance regulator counter
properly.
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Andy Shevchenko [Tue, 26 Jul 2022 12:05:56 +0000 (13:05 +0100)]
media: ov2740: Use traditional pattern when checking error codes
Instead of 'if (!ret)' switch to "check for the error first" rule.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Andy Shevchenko [Tue, 26 Jul 2022 12:05:55 +0000 (13:05 +0100)]
media: ov2740: Add missed \n to the end of the messages
Add missed \n to the end of the messages.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Andy Shevchenko [Tue, 26 Jul 2022 12:05:54 +0000 (13:05 +0100)]
media: ov2740: Switch to use dev_err_probe()
Switch to use dev_err_probe() to simpify error path and unify message
template.
While at it, add missed \n to the end of the messages.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Andy Shevchenko [Tue, 26 Jul 2022 12:05:53 +0000 (13:05 +0100)]
media: ov2740: Drop redundant assignments of ret = 0
In some cases it might hide real bugs, in most cases here it's just
redundant as it's being reassigned immediately after initial assignment.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Andy Shevchenko [Tue, 26 Jul 2022 12:05:52 +0000 (13:05 +0100)]
media: ov2740: Remove duplicate check for NULL fwnode
fwnode API does proper checks and returns correct codes, no need
to repeat it in the caller.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Andy Shevchenko [Tue, 26 Jul 2022 12:05:51 +0000 (13:05 +0100)]
media: ov2740: Switch from __maybe_unused to pm_sleep_ptr() etc
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less heavier for builds
than the use of __maybe_unused attributes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Andy Shevchenko [Tue, 26 Jul 2022 12:05:49 +0000 (13:05 +0100)]
media: ov2740: Remove duplicative pointer in struct nvm_data
The struct i2c_client pointer is used only to get driver data,
associated with a struct device or print messages on behalf.
Moreover, the very same pointer to a struct device is already
assigned by a regmap and can be retrieved from there.
No need to keep a duplicative pointer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Marco Felsch [Mon, 7 Nov 2022 09:42:12 +0000 (09:42 +0000)]
media: tc358746: drop selecting COMMON_CLK
Still there are archs/platforms which do not support the common clk
framework. If such a platform is used in combination with the module
enabled the compiler will throw an error. Since the clock has stubs if
not selected we can drop it, so it is up to the arch/platform to select
the correct clock framework.
Fixes:
80a21da36051 ("media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Christophe JAILLET [Sat, 12 Nov 2022 20:51:06 +0000 (20:51 +0000)]
media: i2c: aptina-pll: Remove a useless include
<linux/lcm.h> is not needed for this driver. Remove the corresponding
#include.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Ian Cowan [Mon, 14 Nov 2022 16:17:00 +0000 (16:17 +0000)]
media: staging: omap4iss: remove cacheflush import
The cacheflush import is never used, so it is safe to remove it as an
import.
Signed-off-by: Ian Cowan <ian@linux.cowan.aero>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Tue, 10 May 2022 18:37:05 +0000 (19:37 +0100)]
media: imx: Unstage the imx7-media-csi driver
The imx7-media-csi driver, currently in staging, is ready for
prime-time. The staging TODO file lists a few items specific to that
driver, that are already addressed (the "all of the above" part) or can
be addressed later:
- The frame interval monitoring support is a software mechanism to
monitor the device for unexpected stalls, and should be part of the
V4L2 core if desired.
- Restricting the support media bus formats based on the SoC integration
only aims at reducing userspace confusion by not enumerating options
that are known not to be possible, it won't cause regressions if
handled later.
Move the description of the media bus format restriction TODO item to
the driver, drop the other TODO items, and move the driver out of
staging.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Tue, 10 May 2022 15:46:33 +0000 (16:46 +0100)]
media: imx: Decouple imx8mq-mipi-csi2 from imx7-media-csi
The imx8mq-mipi-csi2 driver targets SoCs that also run the
imx7-media-csi driver, but they are distinct. Decouple them in Kconfig
to prepare for destaging of the imx7-media-csi driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Wed, 7 Sep 2022 18:42:16 +0000 (19:42 +0100)]
media: imx: imx7-media-csi: Clear BIT_MIPI_DOUBLE_CMPNT for <16b formats
Commit
9babbbaaeb87 ("media: imx: imx7-media-csi: Use dual sampling for
YUV 1X16") set BIT_MIPI_DOUBLE_CMPNT in the CR18 register for 16-bit YUV
formats in imx7_csi_configure(). The CR18 register is always updated
with read-modify-write cycles, so if a 16-bit YUV format is selected,
the bit will stay set forever, even if the format is changed. Fix it by
clearing the bit at the beginning of the imx7_csi_configure() function.
While at it, swap two of the bits being cleared to match the MSB to LSB
order. This doesn't cause any functional change.
Fixes:
9babbbaaeb87 ("media: imx: imx7-media-csi: Use dual sampling for YUV 1X16")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Tue, 6 Sep 2022 23:04:01 +0000 (00:04 +0100)]
media: imx: imx7-media-csi: Rename phys variables to dma_addr
All the phys variables and structure fields store a DMA address, not a
physical address. Even if the two are effectively identical on all
platforms where this driver is used due to the lack of IOMMU, rename the
variables to dma_addr to make their usage clearer.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Tue, 6 Sep 2022 23:04:01 +0000 (00:04 +0100)]
media: imx: imx7-media-csi: Move variable to loop scope
The phys variable is only used as a local loop variable in
imx7_csi_setup_vb2_buf(), with each entry in the array being used in the
corresponding iteration of the loop only. Move it to loop scope,
simplifying the array to a single variable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Paul Elder [Wed, 7 Sep 2022 11:47:37 +0000 (12:47 +0100)]
media: imx: imx7-media-csi: Add support for fast-tracking queued buffers
The CSI hardware compatible with this driver handles buffers using a
ping-pong mechanism with two sets of destination addresses. Normally,
when an interrupt comes in to signal the completion of one buffer, say
FB1, it assigns the next buffer in the queue to the next FB1, and the
hardware starts to capture into FB2 in the meantime.
In a buffer underrun situation, in the above example without loss of
generality, if a new buffer is queued before the interrupt for FB1 comes
in, we can program the buffer into FB2 (which is programmed with a dummy
buffer, as there is a buffer underrun).
This of course races with the interrupt that signals FB1 completion, as
once that interrupt comes in, we are no longer guaranteed that the
programming of FB2 was in time and must assume it was too late. This
race is resolved partly by locking the programming of FB2. If it came
after the interrupt for FB1, then the variable that is used to determine
which FB to program would have been swapped by the interrupt handler.
This alone isn't sufficient, however, because the interrupt could still
be generated (thus the hardware starts capturing into the other fb)
while the fast-tracking routine has the irq lock. Thus, after
programming the fb register to fast-track the buffer, the isr also must
be checked to confirm that an interrupt didn't come in the meantime. If
it has, we must assume that programming the register for the
fast-tracked buffer was not in time, and queue the buffer normally.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Christophe JAILLET [Sat, 12 Nov 2022 21:24:34 +0000 (21:24 +0000)]
media: imx: imx7-media-csi: Remove a useless include
<linux/gcd.h> is not needed for this driver. Remove the corresponding
#include.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Mauro Carvalho Chehab [Fri, 25 Nov 2022 08:29:39 +0000 (08:29 +0000)]
Merge tag 'br-v6.2f' of git://linuxtv.org/hverkuil/media_tree into media_stage
Tag branch
* tag 'br-v6.2f' of git://linuxtv.org/hverkuil/media_tree: (26 commits)
media: atmel: atmel-isc: move to staging
media: microchip: microchip-isc: move media_pipeline_* to (un)prepare cb
media: microchip: microchip-isc: implement media controller
media: microchip: microchip-isc: prepare for media controller support
media: microchip: add ISC driver as Microchip ISC
media: atmel: move microchip_csi2dc to dedicated microchip platform
vb2/au0828: move the v4l_vb2q_enable_media_source to the au0828 driver
vb2: add (un)prepare_streaming queue ops
media: admin-guide: cec.rst
staging: media: sunxi: cedrus: make vb2_ops struct definition const
media: amphion: Fix error handling in vpu_driver_init()
media: platform: exynos4-is: Fix error handling in fimc_md_init()
media: mtk-jpegdec: add missing destroy_workqueue()
media: aspeed: Use v4l2_dbg to replace v4l2_warn to avoid log spam
media: solo6x10: fix possible memory leak in solo_sysfs_init()
media: cedrus: Relax HEVC SPS restrictions
media: cedrus: h265: Support decoding 10-bit frames
media: cedrus: Adjust buffer size based on codec
media: s5p-mfc: Optimisation of code to remove error message
media: s5p-mfc:fix usage of Block comment alignment
...
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Andy Shevchenko [Fri, 18 Nov 2022 18:43:09 +0000 (18:43 +0000)]
media: atomisp: Make bds_factors_list be type of struct u32_fract
The list contains the Bayer scale index, and rational fraction of it.
The struct u32_fract is suitable type to hold that. Convert the driver
to use latter instead of former.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 23 Oct 2022 23:05:08 +0000 (00:05 +0100)]
media: atomisp_ov2680: Fix 1280x720 -> 1296x736 resolution
The ov2680_720p_30fps register init list used for the 1296x736 resolution
sets the hsize register to 1296 and the vsize register to 736.
This is actually the right thing to do when combined with the atomISP2
because the ISP requires 16 bytes padding leaving userspace to see
1280x720.
But the resolution list entries for this was incorrectly reporting
the resolution being send to the ISP as already being 1280x720,
leaving usespace to see 1274x704 as resolution.
Worse then userspace seeing a weird resolution selecting the
1280x720 sensor resolution (which in reality is sending 1296x736)
to the ISP was causing the ISP to hang on Cherry Trail based tablets
(Bay Trail works fine for some reason).
This commit also adds a bunch of comments annotating what
the various register writes the init lists are doing.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Mon, 14 Nov 2022 16:07:45 +0000 (16:07 +0000)]
media: atomisp: Remove atomisp_ospm_dphy_up()/_down() functions
atomisp_ospm_dphy_up() is an empty function now and
atomisp_ospm_dphy_down() contains a couple of checks + goto done
statements which don't matter since the function always ends up at
the done label regardless and then it does 1 pci-config write.
Move the single pci-config write directly to atomisp_power_off()
and remove the atomisp_ospm_dphy_up()/_down() functions.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Mon, 14 Nov 2022 16:00:51 +0000 (16:00 +0000)]
media: atomisp: Remove atomisp_ospm_dphy_down() call from probe error path
The only thing which atomisp_ospm_dphy_down() does is disable the CSI
pins, but if we failed to probe the ISP then these will never have
been enabled (because the ISP never started streaming).
So the atomisp_ospm_dphy_down() call in the probe error path is
unnecessary, remove it.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Mon, 14 Nov 2022 15:55:38 +0000 (15:55 +0000)]
media: atomisp: Move calling of css_[un]init() to power_on()/_off()
atomisp_css_init() is always called after calling atomisp_power_on()
either directly or through getting a runtime-pm reference.
Likewise atomisp_css_uninit() is always called after calling
atomisp_power_off().
Move the call site of these 2 functions to inside atomisp_power_on() /
atomisp_power_off() to make this more explicit.
Note this makes atomisp_reset() also set isp_fatal_error on
atomisp_power_on() errors, where as before it only did this on
atomisp_css_init() errors. This behavior change is for the better,
since power-on failing is pretty fatal too.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Mon, 14 Nov 2022 15:44:49 +0000 (15:44 +0000)]
media: atomisp: Remove duplication between runtime-pm and normal-pm code
atomisp_suspend() contains a 1:1 copy of atomisp_runtime_suspend() and
the same goes for the resume() functions.
Rename the runtime functions to atomisp_power_on()/_off() and use these
as runtime-pm handlers as well as helper in other places to remove
the code duplication.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Mon, 14 Nov 2022 15:32:41 +0000 (15:32 +0000)]
media: atomisp: Remove sw_contex.power_state checks
Remove the unnecessary sw_contex.power_state checks:
1. atomisp_freq_scaling() and atomisp_stop_streaming() only run when the
ISP is powered up through runtime-pm, so the checks are not necessary
2. atomisp_mrfld_pre_power_down() and atomisp_runtime_resume() are only
called through the driver-core pm handling code which already
guarantees they are not called when already powered down / up.
3. atomisp_isr() also checks isp->css_initialized which only gets set
by atomisp_css_init() which runs *after* powering up the ISP and which
gets cleared by atomisp_css_uninit() *before* powering down the ISP.
So all the checks are unnecessary, remove them as well as the
sw_contex.power_state field itself.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Mon, 14 Nov 2022 15:09:52 +0000 (15:09 +0000)]
media: atomisp: Remove atomisp_css_suspend()/_resume()
atomisp_css_suspend() is a 1:1 copy of atomisp_css_uninit() and
atomisp_css_resume() is a 1:1 copy of atomisp_css_init().
Remove the 2 copies and have their one caller just call
atomisp_css_uninit() / atomisp_css_init() instead.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Mon, 14 Nov 2022 15:07:18 +0000 (15:07 +0000)]
media: atomisp: Remove clearing of config from atomisp_css_uninit()
atomisp_css_uninit() only runs when all streams are stopped and
atomisp_css_stop() already clears the config, so the clearing
of the config can be dropped from atomisp_css_uninit().
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Fri, 11 Nov 2022 20:47:40 +0000 (20:47 +0000)]
media: atomisp: Remove atomisp_mrfld_power_down()/_up()
atomisp_mrfld_power_down()/_up() are unnecessary wrappers around
atomisp_mrfld_power() remove them and just call atomisp_mrfld_power()
directly.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Fri, 11 Nov 2022 17:48:14 +0000 (17:48 +0000)]
media: atomisp: Remove double atomisp_mrfld_power_down()/_up() calls from atomisp_reset()
atomisp_reset() calls atomisp_mrfld_power_down() after calling
atomisp_runtime_suspend(), which already calls
atomisp_mrfld_power_down() itself.
And the some goes for atomisp_runtime_resume() / atomisp_mrfld_power_up().
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Tue, 8 Nov 2022 19:34:56 +0000 (19:34 +0000)]
media: atomisp: Drop userptr support from hmm
After the conversion to videobuf2 userptr support is no longer needed,
drop it.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Tue, 8 Nov 2022 17:09:44 +0000 (17:09 +0000)]
media: atomisp: Remove unused ia_css_frame_*() functions
After the conversion to videobuf2 a bunch of ia_css_frame_*()
functions are unused, remove them.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Tue, 25 Oct 2022 14:05:20 +0000 (15:05 +0100)]
media: atomisp: Remove atomisp_css_yuvpp_configure_viewfinder() function
Remove atomisp_css_yuvpp_configure_viewfinder(), it is not used anywhere.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Tue, 25 Oct 2022 14:02:15 +0000 (15:02 +0100)]
media: atomisp: Remove 2 unused accelerator mode related functions
Remove ia_css_pipe_get_acc_stage_desc() and sh_css_flush(),
after removing the accelerator /dev/video# node and related ioctls
these are no longer used.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 23 Oct 2022 20:22:14 +0000 (21:22 +0100)]
media: atomisp: Fix deadlock when the /dev/video# node is closed while still streaming
atomisp_release() was taking pipe->vb_queue_mutex + isp->mutex at the
same time. But if the /dev/video# node is closed while still streaming
then vb2_queue_release() will call atomisp_stop_streaming() which takes
isp->mutex itself, leading to a deadlock.
To fix this only take isp->mutex after cleaning up the v4l2_fh /
the vb2_queue. While at it switch to vb2_fop_release() which will take
pipe->vb_queue_mutex for us, which also resolves a FIXME comment.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 23 Oct 2022 20:16:09 +0000 (21:16 +0100)]
media: atomisp: Log an error on failing to alloc private-mem
I managed to trigger an atomisp_css_start() error by pushing my test
system towards an OOM situation, this resulted in the following errors:
atomisp-isp2 0000:00:03.0: alloc pages err...
atomisp-isp2 0000:00:03.0: hmm_bo_alloc_pages failed.
atomisp-isp2 0000:00:03.0: stream[0] start error.
But it is not entirely clear what the root cause of
the "alloc pages err..." error is. I suspect the root cause is
alloc_pages_bulk_array() failing. Add a log message to make
the root cause more clear if this is hit again.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 23 Oct 2022 20:13:01 +0000 (21:13 +0100)]
media: atomisp: Flush queue on atomisp_css_start() error
I managed to trigger an atomisp_css_start() error by pushing my test system
towards an OOM situation, this triggered the following WARN_ON() in
__vb2_queue_cancel() in videobuf2-core.c:
/*
* If you see this warning, then the driver isn't cleaning up properly
* after a failed start_streaming(). See the start_streaming()
* documentation in videobuf2-core.h for more information how buffers
* should be returned to vb2 in start_streaming().
*/
if (WARN_ON(atomic_read(&q->owned_by_drv_count))) {
Fix this by calling atomisp_flush_video_pipe() to return any queued buffers
back to the videobuf2-core on an atomisp_css_start() error.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sat, 22 Oct 2022 14:54:37 +0000 (15:54 +0100)]
media: atomisp: Remove unused QOS defines / structure member
With the accel code gone this is unused, remove it.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Thu, 20 Oct 2022 21:28:51 +0000 (22:28 +0100)]
media: atomisp: Remove accelerator pipe creation code
The ATOMISP_ACC_* custom ioctls and the ACC device node have been removed
in commit
a5c17adbadcb ("media: atomisp: Remove the ACC device node").
This means that pipe_configs[pipe_id].acc_extension now never gets set
which causes atomisp_compat_css20.c: __create_pipe() to always skip
creation of pipes with a pipe_id of IA_CSS_PIPE_ID_ACC / a mode of
IA_CSS_PIPE_MODE_ACC.
This allows removing of the acc_pipe creation / handling code
from mainly sh_css.c and a bunch of other places.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Thu, 20 Oct 2022 19:56:17 +0000 (20:56 +0100)]
media: atomisp: Silence: 'atomisp_q_one_s3a_buffer: drop one s3a stat which has exp_id xx' log messages
Standard v4l2 userspace apps do not consume the s3a statistics block
data. Until we have a userspace consumer for this (libcamera), which
might also involve changing the API for this, lower the log level
of these messages to dev_dbg() to avoid them filling up the logs.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 16 Oct 2022 19:49:43 +0000 (20:49 +0100)]
media: atomisp: gc0310: Power on sensor from set_fmt() callback
Depending on which order userspace makes various v4l2 calls, the sensor
might still be powered down when set_fmt is called.
What should really happen here is delay the writing of the mode-related
registers till streaming is started, but for now use the same quick fix
as the atomisp_ov2680 code and call power_up() from set_fmt() in
combination with keeping track of the power-state to avoid doing the
power-up sequence twice.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 16 Oct 2022 18:28:33 +0000 (19:28 +0100)]
media: atomisp: Remove __atomisp_get_pipe() helper
Remove the complicated __atomisp_get_pipe() helper, atomisp_buf_done()
only needs the pipe pointer in cases where it has a frame, so we can
simply get the pipe from the frame using the vb_to_pipe() helper.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 16 Oct 2022 18:00:07 +0000 (19:00 +0100)]
media: atomisp: Make atomisp_g_fmt_cap() default to YUV420
Make atomisp_g_fmt_cap() default to YUV420 so that it matches with what
atomisp_try_fmt_cap() and atomisp_queue_setup() do when they need to
pick a default pixelformat.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 16 Oct 2022 18:02:54 +0000 (19:02 +0100)]
media: atomisp: Fix atomisp_try_fmt_cap() always returning YUV420 pixelformat
The atomisp_try_fmt() call in atomisp_try_fmt_cap() replaces
the pixelformat passed by userspace with the sensors native pixelformat.
Which always gets replaced by V4L2_PIX_FMT_YUV420 by atomisp_adjust_fmt()
because raw sensor formats are not supported.
This needs to be fixed so that userspace which does a try_fmt call before
s_fmt does not end up always getting YUV420 even if it passed something
else into the try_fmt call.
To fix this restore the userspace requested pixelformat before
the atomisp_adjust_fmt() call. atomisp_adjust_fmt() will replace this
with V4L2_PIX_FMT_YUV420 in case an unsupported format is requested.
Note this relies on the "media: atomisp: Refactor atomisp_adjust_fmt()"
change, before that atomisp_adjust_fmt() would return -EINVAL for
unsupported pixelformats.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 16 Oct 2022 09:35:03 +0000 (10:35 +0100)]
media: atomisp: Refactor atomisp_adjust_fmt()
Refactor atomisp_adjust_fmt():
1. The block starting at "format_bridge = atomisp_get_format_bridge(...)"
and ending with "if (field == V4L2_FIELD_ANY) field = V4L2_FIELD_NONE;"
is duplicated. With only the second block:
a) Properly checking that format_bridge is not NULL; amd
b) Having the special handling for IA_CSS_FRAME_FORMAT_RAW
Remove the first block.
2. On a NULL return from atomisp_get_format_bridge(f->fmt.pix.pixelformat)
fall back to V4L2_PIX_FMT_YUV420 just like in the IA_CSS_FRAME_FORMAT_RAW
case. atomisp_adjust_fmt() is used in VIDIOC_TRY_FMT handling and that
should jusy pick a fmt rather then returning -EINVAL.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 16 Oct 2022 09:43:11 +0000 (10:43 +0100)]
media: atomisp: Fix VIDIOC_REQBUFS failing when VIDIOC_S_FMT has not been called yet
camorama calls VIDIOC_REQBUFS(V4L2_MEMORY_MMAP) to test if MMAP support
works (this was added specifically because of the previously broken
MMAP support in atomisp).
Currently this fails because atomisp_get_css_frame_info() fails in this
case. Although it is weird to call VIDIOC_REQBUFS before VIDIOC_S_FMT,
it is allowed to do this.
Fix this not working by doing a S_FMT to V4L2_PIX_FMT_YUV420 + the highest
supported resolution.
Note this will cause camorama to use mmap mode, which means it will also
use libv4l2 to do format conversion. libv4l2 will pick V4L2_PIX_FMT_RGB565
as input format and this will lead to a garbled video display. This is
a libv4lconvert bug, the RGB565 -> RGB24 path in libv4lconvert assumes
that stride == width which is not true on the atomisp.
I've already send out a libv4lconvert fix for this. Also this can be worked
around by passing --dont-use-libv4l2 as argument to camorama.
Link: https://git.linuxtv.org/v4l-utils.git/commit/?id=aecfcfccfc2f78d7531456ffa5465666c6bc641e
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sat, 15 Oct 2022 17:21:42 +0000 (18:21 +0100)]
media: atomisp: Make it possible to call atomisp_set_fmt() without a file handle
To fix atomisp_queue_setup() sometimes failing it needs to be able to call
atomisp_set_fmt(), but atomisp_queue_setup() (VIDIOC_REQBUFS) does not get
passed a file handle by the videobuf2 core.
Partly revert commit
b3be98f984d4 ("media: atomisp: Remove a couple of not
useful function wrappers") so that atomisp_set_fmt() can be used
without a file handle.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sat, 8 Oct 2022 16:39:32 +0000 (17:39 +0100)]
media: atomisp: Convert to videobuf2
Convert atomisp to use videobuf2.
This fixes mmap not working and in general moving over to
the more modern videobuf2 is a good plan.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Fri, 14 Oct 2022 16:13:41 +0000 (17:13 +0100)]
media: atomisp: Add ia_css_frame_get_info() helper
Several places rely on the [frame_]info member being the first member of
struct ia_css_frame, so that &frame->info will yield NULL when frame is
NULL (some places already explicitly check for a NULL frame pointer but
not nearly all).
For videobuf2 support the vb2_v4l2_buffer struct needs to be embedded
in the frame struct and it needs to be the first member. Breaking the
assumption that &frame->info will yield NULL when frame is NULL.
Add a ia_css_frame_get_info() helper to return either the ia_css_frame_info
struct embedded in the frame, or NULL when the frame pointer is NULL and
use this in places where a ia_css_frame_info ptr or NULL is expected.
To make sure that we catch all uses of the info field this patch also
renames the info field to frame_info.
This is a preparation patch for converting the driver to videobuf2.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sat, 8 Oct 2022 15:27:26 +0000 (16:27 +0100)]
media: atomisp: Use new atomisp_flush_video_pipe() helper in atomisp_streamoff()
Use the new atomisp_flush_video_pipe() helper instead of open-coding it.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sat, 8 Oct 2022 15:20:09 +0000 (16:20 +0100)]
media: atomisp: Add an index helper variable to atomisp_buf_done()
With the videobuf2 conversion accessing the index of a frame is going
to become more involved and writing this out each time is undesired.
Add an 'i' helper variable for the index and assing this once as
preparation for the videobuf2 conversion.
This also makes use of the new rules wrt max line-lengths in the kernel
to avoid breaking up a bunch of lines. Not breaking these lines results
in better readable code (IMHO).
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sat, 8 Oct 2022 15:08:08 +0000 (16:08 +0100)]
media: atomisp: Also track buffers in a list when submitted to the ISP
Instead of using an integer to keep count of how many buffers have
been handed over to the ISP (buffers_in_css) move buffers handed
over to the ISP to a new buffers_in_css list_head so that we can
easily loop over them.
This removes the need for atomisp_flush_video_pipe() to loop over
all buffers and then (ab)use the state to figure out if they
were handed over to the ISP.
Since the buffers are now always on a list when owned by the driver
this also allows the buffer_done path on flush vs normal completion
to be unified (both now need a list_del()) and this common code can
now be factored out into a new atomisp_buffer_done() helper.
This is a preparation patch for moving the driver over to
the videobuf2 framework.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Fri, 7 Oct 2022 18:27:09 +0000 (19:27 +0100)]
media: atomisp: Remove unused atomisp_buffers_queued[_pipe] functions
The atomisp_buffers_queued[_pipe] functions are not used anywhere,
remove them.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Fri, 30 Sep 2022 19:05:44 +0000 (20:05 +0100)]
media: atomisp: On streamoff wait for buffers owned by the CSS to be given back
There is no guarantee that when we stop the pipeline all buffers owned
by the CSS are cleanly returned to the videobuf queue.
This is a problem with videobuf2 which will complain loudly when not
all buffers have been returned after the streamoff() queue op has
returned.
And this also allows removing a WARN() in the continuous mode path.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Fri, 30 Sep 2022 15:54:27 +0000 (16:54 +0100)]
media: atomisp: Make atomisp_q_video_buffers_to_css() static
atomisp_q_video_buffers_to_css() is only used insidd atomisp_fops.c, make
it static.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Mon, 26 Sep 2022 19:43:54 +0000 (20:43 +0100)]
media: atomisp: Add ia_css_frame_init_from_info() function
Add a function to initialize (rather then alloc/create) a
ia_css_frame struct based on an ia_css_frame_info struct.
This is a preparation patch for adding videobuf2 support.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>