platform/kernel/linux-rpi.git
6 years agoparisc: Check if secondary CPUs want own PDC calls
Helge Deller [Fri, 12 Jan 2018 21:51:22 +0000 (22:51 +0100)]
parisc: Check if secondary CPUs want own PDC calls

The architecture specification says (for 64-bit systems): PDC is a per
processor resource, and operating system software must be prepared to
manage separate pointers to PDCE_PROC for each processor.  The address
of PDCE_PROC for the monarch processor is stored in the Page Zero
location MEM_PDC. The address of PDCE_PROC for each non-monarch
processor is passed in gr26 when PDCE_RESET invokes OS_RENDEZ.

Currently we still use one PDC for all CPUs, but in case we face a
machine which is following the specification let's warn about it.

Signed-off-by: Helge Deller <deller@gmx.de>
6 years agoparisc: Hide virtual kernel memory layout
Helge Deller [Fri, 12 Jan 2018 21:57:15 +0000 (22:57 +0100)]
parisc: Hide virtual kernel memory layout

For security reasons do not expose the virtual kernel memory layout to
userspace.

Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org # 4.15
Reviewed-by: Kees Cook <keescook@chromium.org>
6 years agoparisc: Fix ordering of cache and TLB flushes
John David Anglin [Tue, 27 Feb 2018 13:16:07 +0000 (08:16 -0500)]
parisc: Fix ordering of cache and TLB flushes

The change to flush_kernel_vmap_range() wasn't sufficient to avoid the
SMP stalls.  The problem is some drivers call these routines with
interrupts disabled.  Interrupts need to be enabled for flush_tlb_all()
and flush_cache_all() to work.  This version adds checks to ensure
interrupts are not disabled before calling routines that need IPI
interrupts.  When interrupts are disabled, we now drop into slower code.

The attached change fixes the ordering of cache and TLB flushes in
several cases.  When we flush the cache using the existing PTE/TLB
entries, we need to flush the TLB after doing the cache flush.  We don't
need to do this when we flush the entire instruction and data caches as
these flushes don't use the existing TLB entries.  The same is true for
tmpalias region flushes.

The flush_kernel_vmap_range() and invalidate_kernel_vmap_range()
routines have been updated.

Secondly, we added a new purge_kernel_dcache_range_asm() routine to
pacache.S and use it in invalidate_kernel_vmap_range().  Nominally,
purges are faster than flushes as the cache lines don't have to be
written back to memory.

Hopefully, this is sufficient to resolve the remaining problems due to
cache speculation.  So far, testing indicates that this is the case.  I
did work up a patch using tmpalias flushes, but there is a performance
hit because we need the physical address for each page, and we also need
to sequence access to the tmpalias flush code.  This increases the
probability of stalls.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # 4.9+
Signed-off-by: Helge Deller <deller@gmx.de>
6 years agoLinux 4.15
Linus Torvalds [Sun, 28 Jan 2018 21:20:33 +0000 (13:20 -0800)]
Linux 4.15

6 years agoMerge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 28 Jan 2018 20:24:36 +0000 (12:24 -0800)]
Merge branch 'x86-pti-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 retpoline fixlet from Thomas Gleixner:
 "Remove the ESP/RSP thunks for retpoline as they cannot ever work.

  Get rid of them before they show up in a release"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/retpoline: Remove the esp/rsp thunk

6 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 28 Jan 2018 20:19:23 +0000 (12:19 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "A set of small fixes for 4.15:

   - Fix vmapped stack synchronization on systems with 4-level paging
     and a large amount of memory caused by a missing 5-level folding
     which made the pgd synchronization logic to fail and causing double
     faults.

   - Add a missing sanity check in the vmalloc_fault() logic on 5-level
     paging systems.

   - Bring back protection against accessing a freed initrd in the
     microcode loader which was lost by a wrong merge conflict
     resolution.

   - Extend the Broadwell micro code loading sanity check.

   - Add a missing ENDPROC annotation in ftrace assembly code which
     makes ORC unhappy.

   - Prevent loading the AMD power module on !AMD platforms. The load
     itself is uncritical, but an unload attempt results in a kernel
     crash.

   - Update Peter Anvins role in the MAINTAINERS file"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ftrace: Add one more ENDPROC annotation
  x86: Mark hpa as a "Designated Reviewer" for the time being
  x86/mm/64: Tighten up vmalloc_fault() sanity checks on 5-level kernels
  x86/mm/64: Fix vmapped stack syncing on very-large-memory 4-level systems
  x86/microcode: Fix again accessing initrd after having been freed
  x86/microcode/intel: Extend BDW late-loading further with LLC size check
  perf/x86/amd/power: Do not load AMD power module on !AMD platforms

6 years agoMerge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 28 Jan 2018 20:17:35 +0000 (12:17 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer fix from Thomas Gleixner:
 "A single fix for a ~10 years old problem which causes high resolution
  timers to stop after a CPU unplug/plug cycle due to a stale flag in
  the per CPU hrtimer base struct.

  Paul McKenney was hunting this for about a year, but the heisenbug
  nature made it resistant against debug attempts for quite some time"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hrtimer: Reset hrtimer cpu base proper on CPU hotplug

6 years agoMerge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 28 Jan 2018 19:51:45 +0000 (11:51 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fix from Thomas Gleixner:
 "A single bug fix to prevent a subtle deadlock in the scheduler core
  code vs cpu hotplug"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Fix cpu.max vs. cpuhotplug deadlock

6 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 28 Jan 2018 19:48:25 +0000 (11:48 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Thomas Gleixner:
 "Four patches which all address lock inversions and deadlocks in the
  perf core code and the Intel debug store"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Fix perf,x86,cpuhp deadlock
  perf/core: Fix ctx::mutex deadlock
  perf/core: Fix another perf,trace,cpuhp lock inversion
  perf/core: Fix lock inversion between perf,trace,cpuhp

6 years agoMerge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 28 Jan 2018 19:20:35 +0000 (11:20 -0800)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Thomas Gleixner:
 "Two final locking fixes for 4.15:

   - Repair the OWNER_DIED logic in the futex code which got wreckaged
     with the recent fix for a subtle race condition.

   - Prevent the hard lockup detector from triggering when dumping all
     held locks in the system"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/lockdep: Avoid triggering hardlockup from debug_show_all_locks()
  futex: Fix OWNER_DEAD fixup

6 years agox86/ftrace: Add one more ENDPROC annotation
Josh Poimboeuf [Sun, 28 Jan 2018 02:21:50 +0000 (20:21 -0600)]
x86/ftrace: Add one more ENDPROC annotation

When ORC support was added for the ftrace_64.S code, an ENDPROC
for function_hook() was missed. This results in the following warning:

  arch/x86/kernel/ftrace_64.o: warning: objtool: .entry.text+0x0: unreachable instruction

Fixes: e2ac83d74a4d ("x86/ftrace: Fix ORC unwinding from ftrace handlers")
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20180128022150.dqierscqmt3uwwsr@treble
6 years agohrtimer: Reset hrtimer cpu base proper on CPU hotplug
Thomas Gleixner [Fri, 26 Jan 2018 13:54:32 +0000 (14:54 +0100)]
hrtimer: Reset hrtimer cpu base proper on CPU hotplug

The hrtimer interrupt code contains a hang detection and mitigation
mechanism, which prevents that a long delayed hrtimer interrupt causes a
continous retriggering of interrupts which prevent the system from making
progress. If a hang is detected then the timer hardware is programmed with
a certain delay into the future and a flag is set in the hrtimer cpu base
which prevents newly enqueued timers from reprogramming the timer hardware
prior to the chosen delay. The subsequent hrtimer interrupt after the delay
clears the flag and resumes normal operation.

If such a hang happens in the last hrtimer interrupt before a CPU is
unplugged then the hang_detected flag is set and stays that way when the
CPU is plugged in again. At that point the timer hardware is not armed and
it cannot be armed because the hang_detected flag is still active, so
nothing clears that flag. As a consequence the CPU does not receive hrtimer
interrupts and no timers expire on that CPU which results in RCU stalls and
other malfunctions.

Clear the flag along with some other less critical members of the hrtimer
cpu base to ensure starting from a clean state when a CPU is plugged in.

Thanks to Paul, Sebastian and Anna-Maria for their help to get down to the
root cause of that hard to reproduce heisenbug. Once understood it's
trivial and certainly justifies a brown paperbag.

Fixes: 41d2e4949377 ("hrtimer: Tune hrtimer_interrupt hang logic")
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Sewior <bigeasy@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801261447590.2067@nanos
6 years agox86: Mark hpa as a "Designated Reviewer" for the time being
H. Peter Anvin [Thu, 25 Jan 2018 19:59:34 +0000 (11:59 -0800)]
x86: Mark hpa as a "Designated Reviewer" for the time being

Due to some unfortunate events, I have not been directly involved in
the x86 kernel patch flow for a while now.  I have also not been able
to ramp back up by now like I had hoped to, and after reviewing what I
will need to work on both internally at Intel and elsewhere in the near
term, it is clear that I am not going to be able to ramp back up until
late 2018 at the very earliest.

It is not acceptable to not recognize that this load is currently
taken by Ingo and Thomas without my direct participation, so I mark
myself as R: (designated reviewer) rather than M: (maintainer) until
further notice.  This is in fact recognizing the de facto situation
for the past few years.

I have obviously no intention of going away, and I will do everything
within my power to improve Linux on x86 and x86 for Linux.  This,
however, puts credit where it is due and reflects a change of focus.

This patch also removes stale entries for portions of the x86
architecture which have not been maintained separately from arch/x86
for a long time.  If there is a reason to re-introduce them then that
can happen later.

Signed-off-by: H. Peter Anvin <h.peter.anvin@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bruce Schlobohm <bruce.schlobohm@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180125195934.5253-1-hpa@zytor.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
6 years agoMerge tag 'riscv-for-linus-4.15-maintainers' of git://git.kernel.org/pub/scm/linux...
Linus Torvalds [Fri, 26 Jan 2018 23:10:50 +0000 (15:10 -0800)]
Merge tag 'riscv-for-linus-4.15-maintainers' of git://git./linux/kernel/git/palmer/riscv-linux

Pull RISC-V update from Palmer Dabbelt:
 "RISC-V: We have a new mailing list and git repo!

  Sorry to send something essentially as late as possible (Friday after
  an rc9), but we managed to get a mailing list for the RISC-V Linux
  port. We've been using patches@groups.riscv.org for a while, but that
  list has some problems (it's Google Groups and it's shared over all
  RISC-V software projects). The new infaread.org list is much better.
  We just got it on Wednesday but I used it a bit on Thursday to shake
  out all the configuration problems and it appears to be in working
  order.

  When I updated the mailing list I noticed that the MAINTAINERS file
  was pointing to our github repo, but now that we have a kernel.org
  repo I'd like to point to that instead so I changed that as well.
  We'll be centralizing all RISC-V Linux related development here as
  that seems to be the saner way to go about it.

  I can understand if it's too late to get this into 4.15, but given
  that it's not a code change I was hoping it'd still be OK. It would be
  nice to have the new mailing list and git repo in the release tarballs
  so when people start to find bugs they'll get to the right place"

* tag 'riscv-for-linus-4.15-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  Update the RISC-V MAINTAINERS file

6 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Fri, 26 Jan 2018 17:03:16 +0000 (09:03 -0800)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) The per-network-namespace loopback device, and thus its namespace,
    can have its teardown deferred for a long time if a kernel created
    TCP socket closes and the namespace is exiting meanwhile. The kernel
    keeps trying to finish the close sequence until it times out (which
    takes quite some time).

    Fix this by forcing the socket closed in this situation, from Dan
    Streetman.

 2) Fix regression where we're trying to invoke the update_pmtu method
    on route types (in this case metadata tunnel routes) that don't
    implement the dst_ops method. Fix from Nicolas Dichtel.

 3) Fix long standing memory corruption issues in r8169 driver by
    performing the chip statistics DMA programming more correctly. From
    Francois Romieu.

 4) Handle local broadcast sends over VRF routes properly, from David
    Ahern.

 5) Don't refire the DCCP CCID2 timer endlessly, otherwise the socket
    can never be released. From Alexey Kodanev.

 6) Set poll flags properly in VSOCK protocol layer, from Stefan
    Hajnoczi.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  VSOCK: set POLLOUT | POLLWRNORM for TCP_CLOSING
  dccp: don't restart ccid2_hc_tx_rto_expire() if sk in closed state
  net: vrf: Add support for sends to local broadcast address
  r8169: fix memory corruption on retrieval of hardware statistics.
  net: don't call update_pmtu unconditionally
  net: tcp: close sock if net namespace is exiting

6 years agoMerge tag 'drm-fixes-for-v4.15-rc10-2' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Fri, 26 Jan 2018 16:59:57 +0000 (08:59 -0800)]
Merge tag 'drm-fixes-for-v4.15-rc10-2' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "A fairly urgent nouveau regression fix for broken irqs across
  suspend/resume came in. This was broken before but a patch in 4.15 has
  made it much more obviously broken and now s/r fails a lot more often.

  The fix removes freeing the irq across s/r which never should have
  been done anyways.

  Also two vc4 fixes for a NULL deference and some misrendering /
  flickering on screen"

* tag 'drm-fixes-for-v4.15-rc10-2' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau: Move irq setup/teardown to pci ctor/dtor
  drm/vc4: Fix NULL pointer dereference in vc4_save_hang_state()
  drm/vc4: Flush the caches before the bin jobs, as well.

6 years agoVSOCK: set POLLOUT | POLLWRNORM for TCP_CLOSING
Stefan Hajnoczi [Fri, 26 Jan 2018 11:48:25 +0000 (11:48 +0000)]
VSOCK: set POLLOUT | POLLWRNORM for TCP_CLOSING

select(2) with wfds but no rfds must return when the socket is shut down
by the peer.  This way userspace notices socket activity and gets -EPIPE
from the next write(2).

Currently select(2) does not return for virtio-vsock when a SEND+RCV
shutdown packet is received.  This is because vsock_poll() only sets
POLLOUT | POLLWRNORM for TCP_CLOSE, not the TCP_CLOSING state that the
socket is in when the shutdown is received.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agodccp: don't restart ccid2_hc_tx_rto_expire() if sk in closed state
Alexey Kodanev [Fri, 26 Jan 2018 12:14:16 +0000 (15:14 +0300)]
dccp: don't restart ccid2_hc_tx_rto_expire() if sk in closed state

ccid2_hc_tx_rto_expire() timer callback always restarts the timer
again and can run indefinitely (unless it is stopped outside), and after
commit 120e9dabaf55 ("dccp: defer ccid_hc_tx_delete() at dismantle time"),
which moved ccid_hc_tx_delete() (also includes sk_stop_timer()) from
dccp_destroy_sock() to sk_destruct(), this started to happen quite often.
The timer prevents releasing the socket, as a result, sk_destruct() won't
be called.

Found with LTP/dccp_ipsec tests running on the bonding device,
which later couldn't be unloaded after the tests were completed:

  unregister_netdevice: waiting for bond0 to become free. Usage count = 148

Fixes: 2a91aa396739 ("[DCCP] CCID2: Initial CCID2 (TCP-Like) implementation")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoUpdate the RISC-V MAINTAINERS file
Palmer Dabbelt [Wed, 24 Jan 2018 21:26:11 +0000 (13:26 -0800)]
Update the RISC-V MAINTAINERS file

Now that we're upstream in Linux we've been able to make some
infrastructure changes so our port works a bit more like other ports.
Specifically:

* We now have a mailing list specific to the RISC-V Linux port, hosted
  at lists.infreadead.org.
* We now have a kernel.org git tree where work on our port is
  coordinated.

This patch changes the RISC-V maintainers entry to reflect these new
bits of infrastructure.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
6 years agox86/mm/64: Tighten up vmalloc_fault() sanity checks on 5-level kernels
Andy Lutomirski [Thu, 25 Jan 2018 21:12:15 +0000 (13:12 -0800)]
x86/mm/64: Tighten up vmalloc_fault() sanity checks on 5-level kernels

On a 5-level kernel, if a non-init mm has a top-level entry, it needs to
match init_mm's, but the vmalloc_fault() code skipped over the BUG_ON()
that would have checked it.

While we're at it, get rid of the rather confusing 4-level folded "pgd"
logic.

Cleans-up: b50858ce3e2a ("x86/mm/vmalloc: Add 5-level paging support")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Neil Berrington <neil.berrington@datacore.com>
Link: https://lkml.kernel.org/r/2ae598f8c279b0a29baf75df207e6f2fdddc0a1b.1516914529.git.luto@kernel.org
6 years agox86/mm/64: Fix vmapped stack syncing on very-large-memory 4-level systems
Andy Lutomirski [Thu, 25 Jan 2018 21:12:14 +0000 (13:12 -0800)]
x86/mm/64: Fix vmapped stack syncing on very-large-memory 4-level systems

Neil Berrington reported a double-fault on a VM with 768GB of RAM that uses
large amounts of vmalloc space with PTI enabled.

The cause is that load_new_mm_cr3() was never fixed to take the 5-level pgd
folding code into account, so, on a 4-level kernel, the pgd synchronization
logic compiles away to exactly nothing.

Interestingly, the problem doesn't trigger with nopti.  I assume this is
because the kernel is mapped with global pages if we boot with nopti.  The
sequence of operations when we create a new task is that we first load its
mm while still running on the old stack (which crashes if the old stack is
unmapped in the new mm unless the TLB saves us), then we call
prepare_switch_to(), and then we switch to the new stack.
prepare_switch_to() pokes the new stack directly, which will populate the
mapping through vmalloc_fault().  I assume that we're getting lucky on
non-PTI systems -- the old stack's TLB entry stays alive long enough to
make it all the way through prepare_switch_to() and switch_to() so that we
make it to a valid stack.

Fixes: b50858ce3e2a ("x86/mm/vmalloc: Add 5-level paging support")
Reported-and-tested-by: Neil Berrington <neil.berrington@datacore.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: stable@vger.kernel.org
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/346541c56caed61abbe693d7d2742b4a380c5001.1516914529.git.luto@kernel.org
6 years agoMerge branch 'linux-4.15' of git://github.com/skeggsb/linux into drm-fixes
Dave Airlie [Fri, 26 Jan 2018 05:27:07 +0000 (15:27 +1000)]
Merge branch 'linux-4.15' of git://github.com/skeggsb/linux into drm-fixes

Single irq regression fix
* 'linux-4.15' of git://github.com/skeggsb/linux:
  drm/nouveau: Move irq setup/teardown to pci ctor/dtor

6 years agonet: vrf: Add support for sends to local broadcast address
David Ahern [Thu, 25 Jan 2018 03:37:37 +0000 (19:37 -0800)]
net: vrf: Add support for sends to local broadcast address

Sukumar reported that sends to the local broadcast address
(255.255.255.255) are broken. Check for the address in vrf driver
and do not redirect to the VRF device - similar to multicast
packets.

With this change sockets can use SO_BINDTODEVICE to specify an
egress interface and receive responses. Note: the egress interface
can not be a VRF device but needs to be the enslaved device.

https://bugzilla.kernel.org/show_bug.cgi?id=198521

Reported-by: Sukumar Gopalakrishnan <sukumarg1973@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agor8169: fix memory corruption on retrieval of hardware statistics.
Francois Romieu [Fri, 26 Jan 2018 00:53:26 +0000 (01:53 +0100)]
r8169: fix memory corruption on retrieval of hardware statistics.

Hardware statistics retrieval hurts in tight invocation loops.

Avoid extraneous write and enforce strict ordering of writes targeted to
the tally counters dump area address registers.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Oliver Freyermuth <o.freyermuth@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Fri, 26 Jan 2018 01:30:47 +0000 (17:30 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:
 "The main item is that we try to better handle the newer trackpoints on
  Lenovo devices that are now being produced by Elan/ALPS/NXP and only
  implement a small subset of the original IBM trackpoint controls"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Revert "Input: synaptics_rmi4 - use devm_device_add_group() for attributes in F01"
  Input: trackpoint - only expose supported controls for Elan, ALPS and NXP
  Input: trackpoint - force 3 buttons if 0 button is reported
  Input: xpad - add support for PDP Xbox One controllers
  Input: stmfts,s6sy671 - add SPDX identifier

6 years agoorangefs: fix deadlock; do not write i_size in read_iter
Martin Brandenburg [Fri, 26 Jan 2018 00:39:44 +0000 (19:39 -0500)]
orangefs: fix deadlock; do not write i_size in read_iter

After do_readv_writev, the inode cache is invalidated anyway, so i_size
will never be read.  It will be fetched from the server which will also
know about updates from other machines.

Fixes deadlock on 32-bit SMP.

See https://marc.info/?l=linux-fsdevel&m=151268557427760&w=2

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
6 years agodrm/nouveau: Move irq setup/teardown to pci ctor/dtor
Lyude Paul [Thu, 25 Jan 2018 23:29:53 +0000 (18:29 -0500)]
drm/nouveau: Move irq setup/teardown to pci ctor/dtor

For a while we've been having issues with seemingly random interrupts
coming from nvidia cards when resuming them. Originally the fix for this
was thought to be just re-arming the MSI interrupt registers right after
re-allocating our IRQs, however it seems a lot of what we do is both
wrong and not even nessecary.

This was made apparent by what appeared to be a regression in the
mainline kernel that started introducing suspend/resume issues for
nouveau:

        a0c9259dc4e1 (irq/matrix: Spread interrupts on allocation)

After this commit was introduced, we started getting interrupts from the
GPU before we actually re-allocated our own IRQ (see references below)
and assigned the IRQ handler. Investigating this turned out that the
problem was not with the commit, but the fact that nouveau even
free/allocates it's irqs before and after suspend/resume.

For starters: drivers in the linux kernel haven't had to handle
freeing/re-allocating their IRQs during suspend/resume cycles for quite
a while now. Nouveau seems to be one of the few drivers left that still
does this, despite the fact there's no reason we actually need to since
disabling interrupts from the device side should be enough, as the
kernel is already smart enough to know to disable host-side interrupts
for us before going into suspend. Since we were tearing down our IRQs by
hand however, that means there was a short period during resume where
interrupts could be received before we re-allocated our IRQ which would
lead to us getting an unhandled IRQ. Since we never handle said IRQ and
re-arm the interrupt registers, this would cause us to miss all of the
interrupts from the GPU and cause our init process to start timing out
on anything requiring interrupts.

So, since this whole setup/teardown every suspend/resume cycle is
useless anyway, move irq setup/teardown into the pci subdev's ctor/dtor
functions instead so they're only called at driver load and driver
unload. This should fix most of the issues with pending interrupts on
resume, along with getting suspend/resume for nouveau to work again.

As well, this probably means we can also just remove the msi rearm call
inside nvkm_pci_init(). But since our main focus here is to fix
suspend/resume before 4.15, we'll save that for a later patch.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Galbraith <efault@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
6 years agonet: don't call update_pmtu unconditionally
Nicolas Dichtel [Thu, 25 Jan 2018 18:03:03 +0000 (19:03 +0100)]
net: don't call update_pmtu unconditionally

Some dst_ops (e.g. md_dst_ops)) doesn't set this handler. It may result to:
"BUG: unable to handle kernel NULL pointer dereference at           (null)"

Let's add a helper to check if update_pmtu is available before calling it.

Fixes: 52a589d51f10 ("geneve: update skb dst pmtu on tx path")
Fixes: a93bf0ff4490 ("vxlan: update skb dst pmtu on tx path")
CC: Roman Kapl <code@rkapl.cz>
CC: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Thu, 25 Jan 2018 17:32:10 +0000 (09:32 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Radim Krčmář:
 "Fix races and a potential use after free in the s390 cmma migration
  code"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: s390: add proper locking for CMMA migration bitmap

6 years agoMerge tag 'for-4.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Linus Torvalds [Thu, 25 Jan 2018 17:03:10 +0000 (09:03 -0800)]
Merge tag 'for-4.15-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fix from David Sterba:
 "It's been reported recently that readdir can list stale entries under
  some conditions. Fix it."

* tag 'for-4.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix stale entries in readdir

6 years agonet: tcp: close sock if net namespace is exiting
Dan Streetman [Thu, 18 Jan 2018 21:14:26 +0000 (16:14 -0500)]
net: tcp: close sock if net namespace is exiting

When a tcp socket is closed, if it detects that its net namespace is
exiting, close immediately and do not wait for FIN sequence.

For normal sockets, a reference is taken to their net namespace, so it will
never exit while the socket is open.  However, kernel sockets do not take a
reference to their net namespace, so it may begin exiting while the kernel
socket is still open.  In this case if the kernel socket is a tcp socket,
it will stay open trying to complete its close sequence.  The sock's dst(s)
hold a reference to their interface, which are all transferred to the
namespace's loopback interface when the real interfaces are taken down.
When the namespace tries to take down its loopback interface, it hangs
waiting for all references to the loopback interface to release, which
results in messages like:

unregister_netdevice: waiting for lo to become free. Usage count = 1

These messages continue until the socket finally times out and closes.
Since the net namespace cleanup holds the net_mutex while calling its
registered pernet callbacks, any new net namespace initialization is
blocked until the current net namespace finishes exiting.

After this change, the tcp socket notices the exiting net namespace, and
closes immediately, releasing its dst(s) and their reference to the
loopback interface, which lets the net namespace continue exiting.

Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1711407
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=97811
Signed-off-by: Dan Streetman <ddstreet@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoperf/x86: Fix perf,x86,cpuhp deadlock
Peter Zijlstra [Wed, 10 Jan 2018 18:23:08 +0000 (19:23 +0100)]
perf/x86: Fix perf,x86,cpuhp deadlock

More lockdep gifts, a 5-way lockup race:

perf_event_create_kernel_counter()
  perf_event_alloc()
    perf_try_init_event()
      x86_pmu_event_init()
__x86_pmu_event_init()
  x86_reserve_hardware()
 #0     mutex_lock(&pmc_reserve_mutex);
    reserve_ds_buffer()
 #1       get_online_cpus()

perf_event_release_kernel()
  _free_event()
    hw_perf_event_destroy()
      x86_release_hardware()
 #0 mutex_lock(&pmc_reserve_mutex)
release_ds_buffer()
 #1   get_online_cpus()

 #1 do_cpu_up()
  perf_event_init_cpu()
 #2     mutex_lock(&pmus_lock)
 #3     mutex_lock(&ctx->mutex)

sys_perf_event_open()
  mutex_lock_double()
 #3     mutex_lock(ctx->mutex)
 #4     mutex_lock_nested(ctx->mutex, 1);

perf_try_init_event()
 #4   mutex_lock_nested(ctx->mutex, 1)
  x86_pmu_event_init()
    intel_pmu_hw_config()
      x86_add_exclusive()
 #0 mutex_lock(&pmc_reserve_mutex)

Fix it by using ordering constructs instead of locking.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
6 years agoperf/core: Fix ctx::mutex deadlock
Peter Zijlstra [Tue, 9 Jan 2018 20:23:02 +0000 (21:23 +0100)]
perf/core: Fix ctx::mutex deadlock

Lockdep noticed the following 3-way lockup scenario:

sys_perf_event_open()
  perf_event_alloc()
    perf_try_init_event()
 #0       ctx = perf_event_ctx_lock_nested(1)
      perf_swevent_init()
swevent_hlist_get()
 #1   mutex_lock(&pmus_lock)

perf_event_init_cpu()
 #1   mutex_lock(&pmus_lock)
 #2   mutex_lock(&ctx->mutex)

sys_perf_event_open()
  mutex_lock_double()
 #2    mutex_lock()
 #0    mutex_lock_nested()

And while we need that perf_event_ctx_lock_nested() for HW PMUs such
that they can iterate the sibling list, trying to match it to the
available counters, the software PMUs need do no such thing. Exclude
them.

In particular the swevent triggers the above invertion, while the
tpevent PMU triggers a more elaborate one through their event_mutex.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
6 years agoperf/core: Fix another perf,trace,cpuhp lock inversion
Peter Zijlstra [Tue, 9 Jan 2018 16:07:59 +0000 (17:07 +0100)]
perf/core: Fix another perf,trace,cpuhp lock inversion

Lockdep noticed the following 3-way lockup race:

        perf_trace_init()
 #0       mutex_lock(&event_mutex)
          perf_trace_event_init()
            perf_trace_event_reg()
              tp_event->class->reg() := tracepoint_probe_register
 #1              mutex_lock(&tracepoints_mutex)
                  trace_point_add_func()
 #2                  static_key_enable()

 #2 do_cpu_up()
  perf_event_init_cpu()
 #3     mutex_lock(&pmus_lock)
 #4     mutex_lock(&ctx->mutex)

perf_ioctl()
 #4   ctx = perf_event_ctx_lock()
  _perf_iotcl()
    ftrace_profile_set_filter()
 #0       mutex_lock(&event_mutex)

Fudge it for now by noting that the tracepoint state does not depend
on the event <-> context relation. Ugly though :/

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
6 years agoperf/core: Fix lock inversion between perf,trace,cpuhp
Peter Zijlstra [Tue, 9 Jan 2018 12:10:30 +0000 (13:10 +0100)]
perf/core: Fix lock inversion between perf,trace,cpuhp

Lockdep gifted us with noticing the following 4-way lockup scenario:

        perf_trace_init()
 #0       mutex_lock(&event_mutex)
          perf_trace_event_init()
            perf_trace_event_reg()
              tp_event->class->reg() := tracepoint_probe_register
 #1             mutex_lock(&tracepoints_mutex)
                  trace_point_add_func()
 #2                 static_key_enable()

 #2     do_cpu_up()
          perf_event_init_cpu()
 #3         mutex_lock(&pmus_lock)
 #4         mutex_lock(&ctx->mutex)

        perf_event_task_disable()
          mutex_lock(&current->perf_event_mutex)
 #4       ctx = perf_event_ctx_lock()
 #5       perf_event_for_each_child()

        do_exit()
          task_work_run()
            __fput()
              perf_release()
                perf_event_release_kernel()
 #4               mutex_lock(&ctx->mutex)
 #5               mutex_lock(&event->child_mutex)
                  free_event()
                    _free_event()
                      event->destroy() := perf_trace_destroy
 #0                     mutex_lock(&event_mutex);

Fix that by moving the free_event() out from under the locks.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
6 years agoMerge tag 'drm-misc-fixes-2018-01-24' of git://anongit.freedesktop.org/drm/drm-misc...
Dave Airlie [Thu, 25 Jan 2018 02:28:15 +0000 (12:28 +1000)]
Merge tag 'drm-misc-fixes-2018-01-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

Two vc4 fixes that were applied in the last day.
One fixes a NULL dereference, and the other fixes
a flickering bug.

Cc: Eric Anholt <eric@anholt.net>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
* tag 'drm-misc-fixes-2018-01-24' of git://anongit.freedesktop.org/drm/drm-misc:
  drm/vc4: Fix NULL pointer dereference in vc4_save_hang_state()
  drm/vc4: Flush the caches before the bin jobs, as well.

6 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Thu, 25 Jan 2018 01:24:30 +0000 (17:24 -0800)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Avoid negative netdev refcount in error flow of xfrm state add, from
    Aviad Yehezkel.

 2) Fix tcpdump decoding of IPSEC decap'd frames by filling in the
    ethernet header protocol field in xfrm{4,6}_mode_tunnel_input().
    From Yossi Kuperman.

 3) Fix a syzbot triggered skb_under_panic in pppoe having to do with
    failing to allocate an appropriate amount of headroom. From
    Guillaume Nault.

 4) Fix memory leak in vmxnet3 driver, from Neil Horman.

 5) Cure out-of-bounds packet memory access in em_nbyte EMATCH module,
    from Wolfgang Bumiller.

 6) Restrict what kinds of sockets can be bound to the KCM multiplexer
    and also disallow when another layer has attached to the socket and
    made use of sk_user_data. From Tom Herbert.

 7) Fix use before init of IOTLB in vhost code, from Jason Wang.

 8) Correct STACR register write bit definition in IBM emac driver, from
    Ivan Mikhaylov.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net/ibm/emac: wrong bit is used for STA control register write
  net/ibm/emac: add 8192 rx/tx fifo size
  vhost: do not try to access device IOTLB when not initialized
  vhost: use mutex_lock_nested() in vhost_dev_lock_vqs()
  i40e: flower: check if TC offload is enabled on a netdev
  qed: Free reserved MR tid
  qed: Remove reserveration of dpi for kernel
  kcm: Check if sk_user_data already set in kcm_attach
  kcm: Only allow TCP sockets to be attached to a KCM mux
  net: sched: fix TCF_LAYER_LINK case in tcf_get_base_ptr
  net: sched: em_nbyte: don't add the data offset twice
  mlxsw: spectrum_router: Don't log an error on missing neighbor
  vmxnet3: repair memory leak
  ipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABEL
  pppoe: take ->needed_headroom of lower device into account on xmit
  xfrm: fix boolean assignment in xfrm_get_type_offload
  xfrm: Fix eth_hdr(skb)->h_proto to reflect inner IP version
  xfrm: fix error flow in case of add state fails
  xfrm: Add SA to hardware at the end of xfrm_state_construct()

6 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Linus Torvalds [Wed, 24 Jan 2018 23:49:02 +0000 (15:49 -0800)]
Merge git://git./linux/kernel/git/davem/sparc

Pull sparc bugfix from David Miller:
 "Sparc Makefile typo fix"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: fix typo in CONFIG_CRYPTO_DES_SPARC64 => CONFIG_CRYPTO_CAMELLIA_SPARC64

6 years agonet/ibm/emac: wrong bit is used for STA control register write
Ivan Mikhaylov [Wed, 24 Jan 2018 12:53:25 +0000 (15:53 +0300)]
net/ibm/emac: wrong bit is used for STA control register write

STA control register has areas of mode and opcodes for opeations. 18 bit is
using for mode selection, where 0 is old MIO/MDIO access method and 1 is
indirect access mode. 19-20 bits are using for setting up read/write
operation(STA opcodes). In current state 'read' is set into old MIO/MDIO mode
with 19 bit and write operation is set into 18 bit which is mode selection,
not a write operation. To correlate write with read we set it into 20 bit.
All those bit operations are MSB 0 based.

Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet/ibm/emac: add 8192 rx/tx fifo size
Ivan Mikhaylov [Wed, 24 Jan 2018 12:53:24 +0000 (15:53 +0300)]
net/ibm/emac: add 8192 rx/tx fifo size

emac4syn chips has availability to use 8192 rx/tx fifo buffer sizes,
in current state if we set it up in dts 8192 as example, we will get
only 2048 which may impact on network speed.

Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoRevert "Input: synaptics_rmi4 - use devm_device_add_group() for attributes in F01"
Nick Dyer [Wed, 24 Jan 2018 21:46:04 +0000 (13:46 -0800)]
Revert "Input: synaptics_rmi4 - use devm_device_add_group() for attributes in F01"

Since the sysfs attribute hangs off the RMI bus, which doesn't go away during
firmware flash, it needs to be explicitly removed, otherwise we would try and
register the same attribute twice.

This reverts commit 36a44af5c176d619552d99697433261141dd1296.

Signed-off-by: Nick Dyer <nick@shmanahar.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
6 years agovhost: do not try to access device IOTLB when not initialized
Jason Wang [Tue, 23 Jan 2018 09:27:26 +0000 (17:27 +0800)]
vhost: do not try to access device IOTLB when not initialized

The code will try to access dev->iotlb when processing
VHOST_IOTLB_INVALIDATE even if it was not initialized which may lead
to NULL pointer dereference. Fixes this by check dev->iotlb before.

Fixes: 6b1e6cc7855b0 ("vhost: new device IOTLB API")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agovhost: use mutex_lock_nested() in vhost_dev_lock_vqs()
Jason Wang [Tue, 23 Jan 2018 09:27:25 +0000 (17:27 +0800)]
vhost: use mutex_lock_nested() in vhost_dev_lock_vqs()

We used to call mutex_lock() in vhost_dev_lock_vqs() which tries to
hold mutexes of all virtqueues. This may confuse lockdep to report a
possible deadlock because of trying to hold locks belong to same
class. Switch to use mutex_lock_nested() to avoid false positive.

Fixes: 6b1e6cc7855b0 ("vhost: new device IOTLB API")
Reported-by: syzbot+dbb7c1161485e61b0241@syzkaller.appspotmail.com
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoi40e: flower: check if TC offload is enabled on a netdev
Jakub Kicinski [Tue, 23 Jan 2018 08:08:40 +0000 (00:08 -0800)]
i40e: flower: check if TC offload is enabled on a netdev

Since TC block changes drivers are required to check if
the TC hw offload flag is set on the interface themselves.

Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower")
Fixes: 44ae12a768b7 ("net: sched: move the can_offload check from binding phase to rule insertion phase")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Amritha Nambiar <amritha.nambiar@intel.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agosparc64: fix typo in CONFIG_CRYPTO_DES_SPARC64 => CONFIG_CRYPTO_CAMELLIA_SPARC64
Corentin Labbe [Tue, 23 Jan 2018 14:33:14 +0000 (14:33 +0000)]
sparc64: fix typo in CONFIG_CRYPTO_DES_SPARC64 => CONFIG_CRYPTO_CAMELLIA_SPARC64

This patch fixes the typo CONFIG_CRYPTO_DES_SPARC64 => CONFIG_CRYPTO_CAMELLIA_SPARC64

Fixes: 81658ad0d923 ("sparc64: Add CAMELLIA driver making use of the new camellia opcodes.")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'qed-rdma-bug-fixes'
David S. Miller [Wed, 24 Jan 2018 21:44:21 +0000 (16:44 -0500)]
Merge branch 'qed-rdma-bug-fixes'

Michal Kalderon says:

====================
qed: rdma bug fixes

This patch contains two small bug fixes related to RDMA.
Both related to resource reservations.
====================

Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoqed: Free reserved MR tid
Michal Kalderon [Tue, 23 Jan 2018 09:33:47 +0000 (11:33 +0200)]
qed: Free reserved MR tid

A tid was allocated for reserved MR during initialization but
not freed. This lead to an annoying output message during
rdma unload flow.

Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoqed: Remove reserveration of dpi for kernel
Michal Kalderon [Tue, 23 Jan 2018 09:33:46 +0000 (11:33 +0200)]
qed: Remove reserveration of dpi for kernel

Double reservation for kernel dedicated dpi was performed.
Once in the core module and once in qedr.
Remove the reservation from core.

Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'kcm-fix-two-syzcaller-issues'
David S. Miller [Wed, 24 Jan 2018 20:54:31 +0000 (15:54 -0500)]
Merge branch 'kcm-fix-two-syzcaller-issues'

Tom Herbert says:

====================
kcm: fix two syzcaller issues

In this patch set:

- Don't allow attaching non-TCP or listener sockets to a KCM mux.
- In kcm_attach Check if sk_user_data is already set. This is
  under lock to avoid race conditions. More work is need to make
  all of the users of sk_user_data to use the same locking.

- v2
  Remove unncessary check for not PF_KCM in kcm_attach (suggested by
  Guillaume Nault)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agokcm: Check if sk_user_data already set in kcm_attach
Tom Herbert [Wed, 24 Jan 2018 20:35:41 +0000 (12:35 -0800)]
kcm: Check if sk_user_data already set in kcm_attach

This is needed to prevent sk_user_data being overwritten.
The check is done under the callback lock. This should prevent
a socket from being attached twice to a KCM mux. It also prevents
a socket from being attached for other use cases of sk_user_data
as long as the other cases set sk_user_data under the lock.
Followup work is needed to unify all the use cases of sk_user_data
to use the same locking.

Reported-by: syzbot+114b15f2be420a8886c3@syzkaller.appspotmail.com
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Signed-off-by: Tom Herbert <tom@quantonium.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agokcm: Only allow TCP sockets to be attached to a KCM mux
Tom Herbert [Wed, 24 Jan 2018 20:35:40 +0000 (12:35 -0800)]
kcm: Only allow TCP sockets to be attached to a KCM mux

TCP sockets for IPv4 and IPv6 that are not listeners or in closed
stated are allowed to be attached to a KCM mux.

Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot+8865eaff7f9acd593945@syzkaller.appspotmail.com
Signed-off-by: Tom Herbert <tom@quantonium.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMAINTAINERS: update email address for James Morris
James Morris [Wed, 24 Jan 2018 20:53:57 +0000 (07:53 +1100)]
MAINTAINERS: update email address for James Morris

Update my email address.

Signed-off-by: James Morris <jmorris@namei.org>
6 years agonet: sched: fix TCF_LAYER_LINK case in tcf_get_base_ptr
Wolfgang Bumiller [Thu, 18 Jan 2018 10:32:36 +0000 (11:32 +0100)]
net: sched: fix TCF_LAYER_LINK case in tcf_get_base_ptr

TCF_LAYER_LINK and TCF_LAYER_NETWORK returned the same pointer as
skb->data points to the network header.
Use skb_mac_header instead.

Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: sched: em_nbyte: don't add the data offset twice
Wolfgang Bumiller [Thu, 18 Jan 2018 10:32:35 +0000 (11:32 +0100)]
net: sched: em_nbyte: don't add the data offset twice

'ptr' is shifted by the offset and then validated,
the memcmp should not add it a second time.

Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoBtrfs: fix stale entries in readdir
Josef Bacik [Tue, 23 Jan 2018 20:17:05 +0000 (15:17 -0500)]
Btrfs: fix stale entries in readdir

In fixing the readdir+pagefault deadlock I accidentally introduced a
stale entry regression in readdir.  If we get close to full for the
temporary buffer, and then skip a few delayed deletions, and then try to
add another entry that won't fit, we will emit the entries we found and
retry.  Unfortunately we delete entries from our del_list as we find
them, assuming we won't need them.  However our pos will be with
whatever our last entry was, which could be before the delayed deletions
we skipped, so the next search will add the deleted entries back into
our readdir buffer.  So instead don't delete entries we find in our
del_list so we can make sure we always find our delayed deletions.  This
is a slight perf hit for readdir with lots of pending deletions, but
hopefully this isn't a common occurrence.  If it is we can revist this
and optimize it.

cc: stable@vger.kernel.org
Fixes: 23b5ec74943f ("btrfs: fix readdir deadlock with pagefault")
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
6 years agoMerge tag 'trace-v4.15-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt...
Linus Torvalds [Wed, 24 Jan 2018 18:08:16 +0000 (10:08 -0800)]
Merge tag 'trace-v4.15-rc9' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "With the new ORC unwinder, ftrace stack tracing became disfunctional.

  One was that ORC didn't know how to handle the ftrace callbacks in
  general (which Josh fixed).

  The other was that ORC would just bail if it hit a dynamically
  allocated trampoline. Which means all ftrace stack tracing that
  happens from the function tracer would produce no results (that
  includes killing the max stack size tracer). I added a check to the
  ORC unwinder to see if the trampoline belonged to ftrace, and if it
  did, use the orc entry of the static trampoline that was used to
  create the dynamic one (it would be identical).

  Finally, I noticed that the skip values of the stack tracing were out
  of whack. I went through and fixed them up"

* tag 'trace-v4.15-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Update stack trace skipping for ORC unwinder
  ftrace, orc, x86: Handle ftrace dynamically allocated trampolines
  x86/ftrace: Fix ORC unwinding from ftrace handlers

6 years agoMAINTAINERS: clarify that only verified bugs should be submitted to security@
Willy Tarreau [Thu, 4 Jan 2018 13:31:25 +0000 (14:31 +0100)]
MAINTAINERS: clarify that only verified bugs should be submitted to security@

We're seeing a raise of automated reports from testing tools and reports
about address leaks that are not really exploitable as-is, many of which
do not represent an immediate risk justifying to work in closed places.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
6 years agoRevert "module: Add retpoline tag to VERMAGIC"
Greg Kroah-Hartman [Wed, 24 Jan 2018 14:28:17 +0000 (15:28 +0100)]
Revert "module: Add retpoline tag to VERMAGIC"

This reverts commit 6cfb521ac0d5b97470883ff9b7facae264b7ab12.

Turns out distros do not want to make retpoline as part of their "ABI",
so this patch should not have been merged.  Sorry Andi, this was my
fault, I suggested it when your original patch was the "correct" way of
doing this instead.

Reported-by: Jiri Kosina <jikos@kernel.org>
Fixes: 6cfb521ac0d5 ("module: Add retpoline tag to VERMAGIC")
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: rusty@rustcorp.com.au
Cc: arjan.van.de.ven@intel.com
Cc: jeyu@kernel.org
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
6 years agomlxsw: spectrum_router: Don't log an error on missing neighbor
Yuval Mintz [Wed, 24 Jan 2018 09:02:09 +0000 (10:02 +0100)]
mlxsw: spectrum_router: Don't log an error on missing neighbor

Driver periodically samples all neighbors configured in device
in order to update the kernel regarding their state. When finding
an entry configured in HW that doesn't show in neigh_lookup()
driver logs an error message.
This introduces a race when removing multiple neighbors -
it's possible that a given entry would still be configured in HW
as its removal is still being processed but is already removed
from the kernel's neighbor tables.

Simply remove the error message and gracefully accept such events.

Fixes: c723c735fa6b ("mlxsw: spectrum_router: Periodically update the kernel's neigh table")
Fixes: 60f040ca11b9 ("mlxsw: spectrum_router: Periodically dump active IPv6 neighbours")
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
David S. Miller [Wed, 24 Jan 2018 15:32:29 +0000 (10:32 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec

Steffen Klassert says:

====================
pull request (net): ipsec 2018-01-24

1) Only offloads SAs after they are fully initialized.
   Otherwise a NIC may receive packets on a SA we can
   not yet handle in the stack.
   From Yossi Kuperman.

2) Fix negative refcount in case of a failing offload.
   From Aviad Yehezkel.

3) Fix inner IP ptoro version when decapsulating
   from interaddress family tunnels.
   From Yossi Kuperman.

4) Use true or false for boolean variables instead of an
   integer value in xfrm_get_type_offload.
   From Gustavo A. R. Silva.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge tag 'kvm-s390-master-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git...
Radim Krčmář [Wed, 24 Jan 2018 15:25:53 +0000 (16:25 +0100)]
Merge tag 'kvm-s390-master-4.15-3' of git://git./linux/kernel/git/kvms390/linux

KVM: s390: another fix for cmma migration

This fixes races and potential use after free in the
cmma migration code.

6 years agoKVM: s390: add proper locking for CMMA migration bitmap
Christian Borntraeger [Fri, 22 Dec 2017 09:54:20 +0000 (10:54 +0100)]
KVM: s390: add proper locking for CMMA migration bitmap

Some parts of the cmma migration bitmap is already protected
with the kvm->lock (e.g. the migration start). On the other
hand the read of the cmma bits is not protected against a
concurrent free, neither is the emulation of the ESSA instruction.
Let's extend the locking to all related ioctls by using
the slots lock for
- kvm_s390_vm_start_migration
- kvm_s390_vm_stop_migration
- kvm_s390_set_cmma_bits
- kvm_s390_get_cmma_bits

In addition to that, we use synchronize_srcu before freeing
the migration structure as all users hold kvm->srcu for read.
(e.g. the ESSA handler).

Reported-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: stable@vger.kernel.org # 4.13+
Fixes: 190df4a212a7 (KVM: s390: CMMA tracking, ESSA emulation, migration mode)
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
6 years agox86/microcode: Fix again accessing initrd after having been freed
Borislav Petkov [Tue, 23 Jan 2018 10:41:33 +0000 (11:41 +0100)]
x86/microcode: Fix again accessing initrd after having been freed

Commit 24c2503255d3 ("x86/microcode: Do not access the initrd after it has
been freed") fixed attempts to access initrd from the microcode loader
after it has been freed. However, a similar KASAN warning was reported
(stack trace edited):

  smpboot: Booting Node 0 Processor 1 APIC 0x11
  ==================================================================
  BUG: KASAN: use-after-free in find_cpio_data+0x9b5/0xa50
  Read of size 1 at addr ffff880035ffd000 by task swapper/1/0

  CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.8-slack #7
  Hardware name: System manufacturer System Product Name/A88X-PLUS, BIOS 3003 03/10/2016
  Call Trace:
   dump_stack
   print_address_description
   kasan_report
   ? find_cpio_data
   __asan_report_load1_noabort
   find_cpio_data
   find_microcode_in_initrd
   __load_ucode_amd
   load_ucode_amd_ap
      load_ucode_ap

After some investigation, it turned out that a merge was done using the
wrong side to resolve, leading to picking up the previous state, before
the 24c2503255d3 fix. Therefore the Fixes tag below contains a merge
commit.

Revert the mismerge by catching the save_microcode_in_initrd_amd()
retval and thus letting the function exit with the last return statement
so that initrd_gone can be set to true.

Fixes: f26483eaedec ("Merge branch 'x86/urgent' into x86/microcode, to resolve conflicts")
Reported-by: <higuita@gmx.net>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198295
Link: https://lkml.kernel.org/r/20180123104133.918-2-bp@alien8.de
6 years agox86/microcode/intel: Extend BDW late-loading further with LLC size check
Jia Zhang [Tue, 23 Jan 2018 10:41:32 +0000 (11:41 +0100)]
x86/microcode/intel: Extend BDW late-loading further with LLC size check

Commit b94b73733171 ("x86/microcode/intel: Extend BDW late-loading with a
revision check") reduced the impact of erratum BDF90 for Broadwell model
79.

The impact can be reduced further by checking the size of the last level
cache portion per core.

Tony: "The erratum says the problem only occurs on the large-cache SKUs.
So we only need to avoid the update if we are on a big cache SKU that is
also running old microcode."

For more details, see erratum BDF90 in document #334165 (Intel Xeon
Processor E7-8800/4800 v4 Product Family Specification Update) from
September 2017.

Fixes: b94b73733171 ("x86/microcode/intel: Extend BDW late-loading with a revision check")
Signed-off-by: Jia Zhang <zhang.jia@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1516321542-31161-1-git-send-email-zhang.jia@linux.alibaba.com
6 years agoperf/x86/amd/power: Do not load AMD power module on !AMD platforms
Xiao Liang [Mon, 22 Jan 2018 06:12:52 +0000 (14:12 +0800)]
perf/x86/amd/power: Do not load AMD power module on !AMD platforms

The AMD power module can be loaded on non AMD platforms, but unload fails
with the following Oops:

 BUG: unable to handle kernel NULL pointer dereference at           (null)
 IP: __list_del_entry_valid+0x29/0x90
 Call Trace:
  perf_pmu_unregister+0x25/0xf0
  amd_power_pmu_exit+0x1c/0xd23 [power]
  SyS_delete_module+0x1a8/0x2b0
  ? exit_to_usermode_loop+0x8f/0xb0
  entry_SYSCALL_64_fastpath+0x20/0x83

Return -ENODEV instead of 0 from the module init function if the CPU does
not match.

Fixes: c7ab62bfbe0e ("perf/x86/amd/power: Add AMD accumulated power reporting mechanism")
Signed-off-by: Xiao Liang <xiliang@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180122061252.6394-1-xiliang@redhat.com
6 years agox86/retpoline: Remove the esp/rsp thunk
Waiman Long [Mon, 22 Jan 2018 22:09:34 +0000 (17:09 -0500)]
x86/retpoline: Remove the esp/rsp thunk

It doesn't make sense to have an indirect call thunk with esp/rsp as
retpoline code won't work correctly with the stack pointer register.
Removing it will help compiler writers to catch error in case such
a thunk call is emitted incorrectly.

Fixes: 76b043848fd2 ("x86/retpoline: Add initial retpoline support")
Suggested-by: Jeff Law <law@redhat.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Kees Cook <keescook@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/1516658974-27852-1-git-send-email-longman@redhat.com
6 years agosched/core: Fix cpu.max vs. cpuhotplug deadlock
Peter Zijlstra [Mon, 22 Jan 2018 21:53:28 +0000 (22:53 +0100)]
sched/core: Fix cpu.max vs. cpuhotplug deadlock

Tejun reported the following cpu-hotplug lock (percpu-rwsem) read recursion:

  tg_set_cfs_bandwidth()
    get_online_cpus()
      cpus_read_lock()

    cfs_bandwidth_usage_inc()
      static_key_slow_inc()
        cpus_read_lock()

Reported-by: Tejun Heo <tj@kernel.org>
Tested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180122215328.GP3397@worktop
Signed-off-by: Ingo Molnar <mingo@kernel.org>
6 years agolocking/lockdep: Avoid triggering hardlockup from debug_show_all_locks()
Tejun Heo [Mon, 22 Jan 2018 22:00:55 +0000 (14:00 -0800)]
locking/lockdep: Avoid triggering hardlockup from debug_show_all_locks()

debug_show_all_locks() iterates all tasks and print held locks whole
holding tasklist_lock.  This can take a while on a slow console device
and may end up triggering NMI hardlockup detector if someone else ends
up waiting for tasklist_lock.

Touch the NMI watchdog while printing the held locks to avoid
spuriously triggering the hardlockup detector.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20180122220055.GB1771050@devbig577.frc2.facebook.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
6 years agofutex: Fix OWNER_DEAD fixup
Peter Zijlstra [Mon, 22 Jan 2018 10:39:47 +0000 (11:39 +0100)]
futex: Fix OWNER_DEAD fixup

Both Geert and DaveJ reported that the recent futex commit:

  c1e2f0eaf015 ("futex: Avoid violating the 10th rule of futex")

introduced a problem with setting OWNER_DEAD. We set the bit on an
uninitialized variable and then entirely optimize it away as a
dead-store.

Move the setting of the bit to where it is more useful.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: c1e2f0eaf015 ("futex: Avoid violating the 10th rule of futex")
Link: http://lkml.kernel.org/r/20180122103947.GD2228@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
6 years agovmxnet3: repair memory leak
Neil Horman [Mon, 22 Jan 2018 21:06:37 +0000 (16:06 -0500)]
vmxnet3: repair memory leak

with the introduction of commit
b0eb57cb97e7837ebb746404c2c58c6f536f23fa, it appears that rq->buf_info
is improperly handled.  While it is heap allocated when an rx queue is
setup, and freed when torn down, an old line of code in
vmxnet3_rq_destroy was not properly removed, leading to rq->buf_info[0]
being set to NULL prior to its being freed, causing a memory leak, which
eventually exhausts the system on repeated create/destroy operations
(for example, when  the mtu of a vmxnet3 interface is changed
frequently.

Fix is pretty straight forward, just move the NULL set to after the
free.

Tested by myself with successful results

Applies to net, and should likely be queued for stable, please

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-By: boyang@redhat.com
CC: boyang@redhat.com
CC: Shrikrishna Khare <skhare@vmware.com>
CC: "VMware, Inc." <pv-drivers@vmware.com>
CC: David S. Miller <davem@davemloft.net>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABEL
Ben Hutchings [Mon, 22 Jan 2018 20:06:42 +0000 (20:06 +0000)]
ipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABEL

Commit 513674b5a2c9 ("net: reevalulate autoflowlabel setting after
sysctl setting") removed the initialisation of
ipv6_pinfo::autoflowlabel and added a second flag to indicate
whether this field or the net namespace default should be used.

The getsockopt() handling for this case was not updated, so it
currently returns 0 for all sockets for which IPV6_AUTOFLOWLABEL is
not explicitly enabled.  Fix it to return the effective value, whether
that has been set at the socket or net namespace level.

Fixes: 513674b5a2c9 ("net: reevalulate autoflowlabel setting after sysctl ...")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agopppoe: take ->needed_headroom of lower device into account on xmit
Guillaume Nault [Mon, 22 Jan 2018 17:06:37 +0000 (18:06 +0100)]
pppoe: take ->needed_headroom of lower device into account on xmit

In pppoe_sendmsg(), reserving dev->hard_header_len bytes of headroom
was probably fine before the introduction of ->needed_headroom in
commit f5184d267c1a ("net: Allow netdevices to specify needed head/tailroom").

But now, virtual devices typically advertise the size of their overhead
in dev->needed_headroom, so we must also take it into account in
skb_reserve().
Allocation size of skb is also updated to take dev->needed_tailroom
into account and replace the arbitrary 32 bytes with the real size of
a PPPoE header.

This issue was discovered by syzbot, who connected a pppoe socket to a
gre device which had dev->header_ops->create == ipgre_header and
dev->hard_header_len == 0. Therefore, PPPoE didn't reserve any
headroom, and dev_hard_header() crashed when ipgre_header() tried to
prepend its header to skb->data.

skbuff: skb_under_panic: text:000000001d390b3a len:31 put:24
head:00000000d8ed776f data:000000008150e823 tail:0x7 end:0xc0 dev:gre0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:104!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
    (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 3670 Comm: syzkaller801466 Not tainted
4.15.0-rc7-next-20180115+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:skb_panic+0x162/0x1f0 net/core/skbuff.c:100
RSP: 0018:ffff8801d9bd7840 EFLAGS: 00010282
RAX: 0000000000000083 RBX: ffff8801d4f083c0 RCX: 0000000000000000
RDX: 0000000000000083 RSI: 1ffff1003b37ae92 RDI: ffffed003b37aefc
RBP: ffff8801d9bd78a8 R08: 1ffff1003b37ae8a R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff86200de0
R13: ffffffff84a981ad R14: 0000000000000018 R15: ffff8801d2d34180
FS:  00000000019c4880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000208bc000 CR3: 00000001d9111001 CR4: 00000000001606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  skb_under_panic net/core/skbuff.c:114 [inline]
  skb_push+0xce/0xf0 net/core/skbuff.c:1714
  ipgre_header+0x6d/0x4e0 net/ipv4/ip_gre.c:879
  dev_hard_header include/linux/netdevice.h:2723 [inline]
  pppoe_sendmsg+0x58e/0x8b0 drivers/net/ppp/pppoe.c:890
  sock_sendmsg_nosec net/socket.c:630 [inline]
  sock_sendmsg+0xca/0x110 net/socket.c:640
  sock_write_iter+0x31a/0x5d0 net/socket.c:909
  call_write_iter include/linux/fs.h:1775 [inline]
  do_iter_readv_writev+0x525/0x7f0 fs/read_write.c:653
  do_iter_write+0x154/0x540 fs/read_write.c:932
  vfs_writev+0x18a/0x340 fs/read_write.c:977
  do_writev+0xfc/0x2a0 fs/read_write.c:1012
  SYSC_writev fs/read_write.c:1085 [inline]
  SyS_writev+0x27/0x30 fs/read_write.c:1082
  entry_SYSCALL_64_fastpath+0x29/0xa0

Admittedly PPPoE shouldn't be allowed to run on non Ethernet-like
interfaces, but reserving space for ->needed_headroom is a more
fundamental issue that needs to be addressed first.

Same problem exists for __pppoe_xmit(), which also needs to take
dev->needed_headroom into account in skb_cow_head().

Fixes: f5184d267c1a ("net: Allow netdevices to specify needed head/tailroom")
Reported-by: syzbot+ed0838d0fa4c4f2b528e20286e6dc63effc7c14d@syzkaller.appspotmail.com
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agotracing: Update stack trace skipping for ORC unwinder
Steven Rostedt (VMware) [Tue, 23 Jan 2018 18:25:04 +0000 (13:25 -0500)]
tracing: Update stack trace skipping for ORC unwinder

With the addition of ORC unwinder and FRAME POINTER unwinder, the stack
trace skipping requirements have changed.

I went through the tracing stack trace dumps with ORC and with frame
pointers and recalculated the proper values.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
6 years agoftrace, orc, x86: Handle ftrace dynamically allocated trampolines
Steven Rostedt (VMware) [Tue, 23 Jan 2018 03:32:51 +0000 (22:32 -0500)]
ftrace, orc, x86: Handle ftrace dynamically allocated trampolines

The function tracer can create a dynamically allocated trampoline that is
called by the function mcount or fentry hook that is used to call the
function callback that is registered. The problem is that the orc undwinder
will bail if it encounters one of these trampolines. This breaks the stack
trace of function callbacks, which include the stack tracer and setting the
stack trace for individual functions.

Since these dynamic trampolines are basically copies of the static ftrace
trampolines defined in ftrace_*.S, we do not need to create new orc entries
for the dynamic trampolines. Finding the return address on the stack will be
identical as the functions that were copied to create the dynamic
trampolines. When encountering a ftrace dynamic trampoline, we can just use
the orc entry of the ftrace static function that was copied for that
trampoline.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
6 years agoMerge tag 'pci-v4.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaa...
Linus Torvalds [Tue, 23 Jan 2018 20:45:40 +0000 (12:45 -0800)]
Merge tag 'pci-v4.15-fixes-3' of git://git./linux/kernel/git/helgaas/pci

Pull PCI fix from Bjorn Helgaas:
 "Fix AMD regression due to not re-enabling the big window on resume
  (Christian König)"

* tag 'pci-v4.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  x86/PCI: Enable AMD 64-bit window on resume

6 years agox86/ftrace: Fix ORC unwinding from ftrace handlers
Josh Poimboeuf [Tue, 23 Jan 2018 04:07:46 +0000 (22:07 -0600)]
x86/ftrace: Fix ORC unwinding from ftrace handlers

Steven Rostedt discovered that the ftrace stack tracer is broken when
it's used with the ORC unwinder.  The problem is that objtool is
instructed by the Makefile to ignore the ftrace_64.S code, so it doesn't
generate any ORC data for it.

Fix it by making the asm code objtool-friendly:

- Objtool doesn't like the fact that save_mcount_regs pushes RBP at the
  beginning, but it's never restored (directly, at least).  So just skip
  the original RBP push, which is only needed for frame pointers anyway.

- Annotate some functions as normal callable functions with
  ENTRY/ENDPROC.

- Add an empty unwind hint to return_to_handler().  The return address
  isn't on the stack, so there's nothing ORC can do there.  It will just
  punt in the unlikely case it tries to unwind from that code.

With all that fixed, remove the OBJECT_FILES_NON_STANDARD Makefile
annotation so objtool can read the file.

Link: http://lkml.kernel.org/r/20180123040746.ih4ep3tk4pbjvg7c@treble
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
6 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Tue, 23 Jan 2018 16:52:55 +0000 (08:52 -0800)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Fix divide by zero in mlx5, from Talut Batheesh.

 2) Guard against invalid GSO packets coming from untrusted guests and
    arriving in qdisc_pkt_len_init(), from Eric Dumazet.

 3) Similarly add such protection to the various protocol GSO handlers.
    From Willem de Bruijn.

 4) Fix regression added to IGMP source address checking for IGMPv3
    reports, from Felix Feitkau.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  tls: Correct length of scatterlist in tls_sw_sendpage
  be2net: restore properly promisc mode after queues reconfiguration
  net: igmp: fix source address check for IGMPv3 reports
  gso: validate gso_type in GSO handlers
  net: qdisc_pkt_len_init() should be more robust
  ibmvnic: Allocate and request vpd in init_resources
  ibmvnic: Revert to previous mtu when unsupported value requested
  ibmvnic: Modify buffer size and number of queues on failover
  rds: tcp: compute m_ack_seq as offset from ->write_seq
  usbnet: silence an unnecessary warning
  cxgb4: fix endianness for vlan value in cxgb4_tc_flower
  cxgb4: set filter type to 1 for ETH_P_IPV6
  net/mlx5e: Fix fixpoint divide exception in mlx5e_am_stats_compare

6 years agoxfrm: fix boolean assignment in xfrm_get_type_offload
Gustavo A. R. Silva [Mon, 22 Jan 2018 22:34:09 +0000 (16:34 -0600)]
xfrm: fix boolean assignment in xfrm_get_type_offload

Assign true or false to boolean variables instead of an integer value.

This issue was detected with the help of Coccinelle.

Fixes: ffdb5211da1c ("xfrm: Auto-load xfrm offload modules")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
6 years agoxfrm: Fix eth_hdr(skb)->h_proto to reflect inner IP version
Yossi Kuperman [Mon, 22 Jan 2018 22:16:21 +0000 (00:16 +0200)]
xfrm: Fix eth_hdr(skb)->h_proto to reflect inner IP version

IPSec tunnel mode supports encapsulation of IPv4 over IPv6 and vice-versa.

The outer IP header is stripped and the inner IP inherits the original
Ethernet header. Tcpdump fails to properly decode the inner packet in
case that h_proto is different than the inner IP version.

Fix h_proto to reflect the inner IP version.

Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
6 years agonfsd: auth: Fix gid sorting when rootsquash enabled
Ben Hutchings [Mon, 22 Jan 2018 20:11:06 +0000 (20:11 +0000)]
nfsd: auth: Fix gid sorting when rootsquash enabled

Commit bdcf0a423ea1 ("kernel: make groups_sort calling a responsibility
group_info allocators") appears to break nfsd rootsquash in a pretty
major way.

It adds a call to groups_sort() inside the loop that copies/squashes
gids, which means the valid gids are sorted along with the following
garbage.  The net result is that the highest numbered valid gids are
replaced with any lower-valued garbage gids, possibly including 0.

We should sort only once, after filling in all the gids.

Fixes: bdcf0a423ea1 ("kernel: make groups_sort calling a responsibility ...")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
6 years agoInput: trackpoint - only expose supported controls for Elan, ALPS and NXP
Dmitry Torokhov [Fri, 5 Jan 2018 21:28:47 +0000 (13:28 -0800)]
Input: trackpoint - only expose supported controls for Elan, ALPS and NXP

The newer trackpoints from ALPS, Elan and NXP implement a very limited
subset of extended commands and controls that the original trackpoints
implemented, so we should not be exposing not working controls in sysfs.
The newer trackpoints also do not implement "Power On Reset" or "Read
Extended Button Status", so we should not be using these commands during
initialization.

While we are at it, let's change "unsigned char" to u8 for byte data or
bool for booleans and use better suited error codes instead of -1.

Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
6 years agoInput: trackpoint - force 3 buttons if 0 button is reported
Aaron Ma [Fri, 19 Jan 2018 17:43:39 +0000 (09:43 -0800)]
Input: trackpoint - force 3 buttons if 0 button is reported

Lenovo introduced trackpoint compatible sticks with minimum PS/2 commands.
They supposed to reply with 0x02, 0x03, or 0x04 in response to the
"Read Extended ID" command, so we would know not to try certain extended
commands. Unfortunately even some trackpoints reporting the original IBM
version (0x01 firmware 0x0e) now respond with incorrect data to the "Get
Extended Buttons" command:

 thinkpad_acpi: ThinkPad BIOS R0DET87W (1.87 ), EC unknown
 thinkpad_acpi: Lenovo ThinkPad E470, model 20H1004SGE

 psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 0/0

Since there are no trackpoints without buttons, let's assume the trackpoint
has 3 buttons when we get 0 response to the extended buttons query.

Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196253
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
6 years agoorangefs: initialize op on loop restart in orangefs_devreq_read
Martin Brandenburg [Mon, 22 Jan 2018 20:44:52 +0000 (15:44 -0500)]
orangefs: initialize op on loop restart in orangefs_devreq_read

In orangefs_devreq_read, there is a loop which picks an op off the list
of pending ops.  If the loop fails to find an op, there is nothing to
read, and it returns EAGAIN.  If the op has been given up on, the loop
is restarted via a goto.  The bug is that the variable which the found
op is written to is not reinitialized, so if there are no more eligible
ops on the list, the code runs again on the already handled op.

This is triggered by interrupting a process while the op is being copied
to the client-core.  It's a fairly small window, but it's there.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
6 years agoorangefs: use list_for_each_entry_safe in purge_waiting_ops
Martin Brandenburg [Mon, 22 Jan 2018 20:44:51 +0000 (15:44 -0500)]
orangefs: use list_for_each_entry_safe in purge_waiting_ops

set_op_state_purged can delete the op.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
6 years agotls: Correct length of scatterlist in tls_sw_sendpage
Dave Watson [Fri, 19 Jan 2018 20:30:13 +0000 (12:30 -0800)]
tls: Correct length of scatterlist in tls_sw_sendpage

The scatterlist is reused by both sendmsg and sendfile.
If a sendmsg of smaller number of pages is followed by a sendfile
of larger number of pages, the scatterlist may be too short, resulting
in a crash in gcm_encrypt.

Add sg_unmark_end to make the list the correct length.

tls_sw_sendmsg already calls sg_unmark_end correctly when it allocates
memory in alloc_sg, or in zerocopy_from_iter.

Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agobe2net: restore properly promisc mode after queues reconfiguration
Ivan Vecera [Fri, 19 Jan 2018 19:23:50 +0000 (20:23 +0100)]
be2net: restore properly promisc mode after queues reconfiguration

The commit 622190669403 ("be2net: Request RSS capability of Rx interface
depending on number of Rx rings") modified be_update_queues() so the
IFACE (HW representation of the netdevice) is destroyed and then
re-created. This causes a regression because potential promiscuous mode
is not restored properly during be_open() because the driver thinks
that the HW has promiscuous mode already enabled.

Note that Lancer is not affected by this bug because RX-filter flags are
disabled during be_close() for this chipset.

Cc: Sathya Perla <sathya.perla@broadcom.com>
Cc: Ajit Khaparde <ajit.khaparde@broadcom.com>
Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Cc: Somnath Kotur <somnath.kotur@broadcom.com>
Fixes: 622190669403 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: igmp: fix source address check for IGMPv3 reports
Felix Fietkau [Fri, 19 Jan 2018 10:50:46 +0000 (11:50 +0100)]
net: igmp: fix source address check for IGMPv3 reports

Commit "net: igmp: Use correct source address on IGMPv3 reports"
introduced a check to validate the source address of locally generated
IGMPv3 packets.
Instead of checking the local interface address directly, it uses
inet_ifa_match(fl4->saddr, ifa), which checks if the address is on the
local subnet (or equal to the point-to-point address if used).

This breaks for point-to-point interfaces, so check against
ifa->ifa_local directly.

Cc: Kevin Cernekee <cernekee@chromium.org>
Fixes: a46182b00290 ("net: igmp: Use correct source address on IGMPv3 reports")
Reported-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agogso: validate gso_type in GSO handlers
Willem de Bruijn [Fri, 19 Jan 2018 14:29:18 +0000 (09:29 -0500)]
gso: validate gso_type in GSO handlers

Validate gso_type during segmentation as SKB_GSO_DODGY sources
may pass packets where the gso_type does not match the contents.

Syzkaller was able to enter the SCTP gso handler with a packet of
gso_type SKB_GSO_TCPV4.

On entry of transport layer gso handlers, verify that the gso_type
matches the transport protocol.

Fixes: 90017accff61 ("sctp: Add GSO support")
Link: http://lkml.kernel.org/r/<001a1137452496ffc305617e5fe0@google.com>
Reported-by: syzbot+fee64147a25aecd48055@syzkaller.appspotmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agonet: qdisc_pkt_len_init() should be more robust
Eric Dumazet [Fri, 19 Jan 2018 03:59:19 +0000 (19:59 -0800)]
net: qdisc_pkt_len_init() should be more robust

Without proper validation of DODGY packets, we might very well
feed qdisc_pkt_len_init() with invalid GSO packets.

tcp_hdrlen() might access out-of-bound data, so let's use
skb_header_pointer() and proper checks.

Whole story is described in commit d0c081b49137 ("flow_dissector:
properly cap thoff field")

We have the goal of validating DODGY packets earlier in the stack,
so we might very well revert this fix in the future.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jason Wang <jasowang@redhat.com>
Reported-by: syzbot+9da69ebac7dddd804552@syzkaller.appspotmail.com
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'ibmvnic-reset-behavior-fixes'
David S. Miller [Mon, 22 Jan 2018 20:46:56 +0000 (15:46 -0500)]
Merge branch 'ibmvnic-reset-behavior-fixes'

John Allen says:

====================
ibmvnic: Reset behavior fixes

This patchset fixes a number of issues related to ibmvnic reset uncovered
from testing new Power9 machines with Everglades adapters and the new
functionality to change mtu and other parameters in the driver.

Changes since v1:
-In patch 1/3, added the line to free the long term buffers before
allocating a new one. This change inadvertently uncovered the problem
that the number of queues can change after a failover as well. To fix
this, we check whether or not the number of queues has changed in
do_reset and if they have, we do a full release and init of the queues.
-In patch 1/3, added variables to the adapter struct to track how
many rx/tx pools have actually been allocated and modify the release
pools routines to use these values rather than the possibly incorrect
req_rx/tx_queues values.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoibmvnic: Allocate and request vpd in init_resources
John Allen [Thu, 18 Jan 2018 22:27:58 +0000 (16:27 -0600)]
ibmvnic: Allocate and request vpd in init_resources

In reset events in which our memory allocations need to be reallocated,
VPD data is being freed, but never reallocated. This can cause issues if
we later attempt to access that memory or reset and attempt to free the
memory. This patch moves the allocation of the VPD data to init_resources
so that it will be symmetrically freed during release resources.

Signed-off-by: John Allen <jallen@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoibmvnic: Revert to previous mtu when unsupported value requested
John Allen [Thu, 18 Jan 2018 22:27:12 +0000 (16:27 -0600)]
ibmvnic: Revert to previous mtu when unsupported value requested

If we request an unsupported mtu value, the vnic server will suggest a
different value. Currently we take the suggested value without question
and login with that value. However, the behavior doesn't seem completely
sane as attempting to change the mtu to some specific value will change
the mtu to some completely different value most of the time. This patch
fixes the issue by logging in with the previously used mtu value and
printing an error message saying that the given mtu is unsupported.

Signed-off-by: John Allen <jallen@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoibmvnic: Modify buffer size and number of queues on failover
John Allen [Thu, 18 Jan 2018 22:26:31 +0000 (16:26 -0600)]
ibmvnic: Modify buffer size and number of queues on failover

Using newer backing devices can cause the required padding at the end of
buffer as well as the number of queues to change after a failover.
Since we currently assume that these values never change, after a
failover to a backing device with different capabilities, we can get
errors from the vnic server, attempt to free long term buffers that are
no longer there, or not free long term buffers that should be freed.

This patch resolves the issue by checking whether any of these values
change, and if so perform the necessary re-allocations.

Signed-off-by: John Allen <jallen@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agords: tcp: compute m_ack_seq as offset from ->write_seq
Sowmini Varadhan [Thu, 18 Jan 2018 21:11:07 +0000 (13:11 -0800)]
rds: tcp: compute m_ack_seq as offset from ->write_seq

rds-tcp uses m_ack_seq to track the tcp ack# that indicates
that the peer has received a rds_message. The m_ack_seq is
used in rds_tcp_is_acked() to figure out when it is safe to
drop the rds_message from the RDS retransmit queue.

The m_ack_seq must be calculated as an offset from the right
edge of the in-flight tcp buffer, i.e., it should be based on
the ->write_seq, not the ->snd_nxt.

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agousbnet: silence an unnecessary warning
Oliver Neukum [Wed, 17 Jan 2018 15:33:54 +0000 (16:33 +0100)]
usbnet: silence an unnecessary warning

That a kevent could not be scheduled is not an error.
Such handlers must be able to deal with multiple events anyway.
As the successful scheduling of a work is a debug event, make
the failure debug priority, too.

V2: coding style

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: Cristian Caravena <caravena@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agoMerge branch 'cxgb4-tc-flower-offload-fixes'
David S. Miller [Mon, 22 Jan 2018 20:26:57 +0000 (15:26 -0500)]
Merge branch 'cxgb4-tc-flower-offload-fixes'

Daniel Borkmann says:

====================
pull-request: bpf 2018-01-18

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a divide by zero due to wrong if (src_reg == 0) check in
   64-bit mode. Properly handle this in interpreter and mask it
   also generically in verifier to guard against similar checks
   in JITs, from Eric and Alexei.

2) Fix a bug in arm64 JIT when tail calls are involved and progs
   have different stack sizes, from Daniel.

3) Reject stores into BPF context that are not expected BPF_STX |
   BPF_MEM variant, from Daniel.

4) Mark dst reg as unknown on {s,u}bounds adjustments when the
   src reg has derived bounds from dead branches, from Daniel.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agocxgb4: fix endianness for vlan value in cxgb4_tc_flower
Kumar Sanghvi [Wed, 17 Jan 2018 06:43:34 +0000 (12:13 +0530)]
cxgb4: fix endianness for vlan value in cxgb4_tc_flower

Don't change endianness when assigning vlan value in cxgb4_tc_flower
code when processing flow match parameters. The value gets converted
to network order as part of filtering code in set_filter_wr.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agocxgb4: set filter type to 1 for ETH_P_IPV6
Kumar Sanghvi [Wed, 17 Jan 2018 06:43:33 +0000 (12:13 +0530)]
cxgb4: set filter type to 1 for ETH_P_IPV6

For ethtype_key = ETH_P_IPV6, set filter type as 1 in cxgb4_tc_flower
code when processing flow match parameters.

Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
6 years agomm, page_vma_mapped: Introduce pfn_in_hpage()
Kirill A. Shutemov [Mon, 22 Jan 2018 09:22:30 +0000 (12:22 +0300)]
mm, page_vma_mapped: Introduce pfn_in_hpage()

The new helper would check if the pfn belongs to the page. For huge
pages it checks if the PFN is within range covered by the huge page.

The helper is used in check_pte(). The original code the helper replaces
had two call to page_to_pfn(). page_to_pfn() is relatively costly.

Although current GCC is able to optimize code to have one call, it's
better to do this explicitly.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
6 years agoInput: xpad - add support for PDP Xbox One controllers
Mark Furneaux [Mon, 22 Jan 2018 19:24:17 +0000 (11:24 -0800)]
Input: xpad - add support for PDP Xbox One controllers

Adds support for the current lineup of Xbox One controllers from PDP
(Performance Designed Products). These controllers are very picky with
their initialization sequence and require an additional 2 packets before
they send any input reports.

Signed-off-by: Mark Furneaux <mark@furneaux.ca>
Reviewed-by: Cameron Gutman <aicommander@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>