René van Dorst [Thu, 19 Mar 2020 13:47:56 +0000 (14:47 +0100)]
net: dsa: mt7530: Change the LINK bit to reflect the link status
[ Upstream commit
22259471b51925353bd7b16f864c79fdd76e425e ]
Andrew reported:
After a number of network port link up/down changes, sometimes the switch
port gets stuck in a state where it thinks it is still transmitting packets
but the cpu port is not actually transmitting anymore. In this state you
will see a message on the console
"mtk_soc_eth
1e100000.ethernet eth0: transmit timed out" and the Tx counter
in ifconfig will be incrementing on virtual port, but not incrementing on
cpu port.
The issue is that MAC TX/RX status has no impact on the link status or
queue manager of the switch. So the queue manager just queues up packets
of a disabled port and sends out pause frames when the queue is full.
Change the LINK bit to reflect the link status.
Fixes:
b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Reported-by: Andrew Smith <andrew.smith@digi.com>
Signed-off-by: René van Dorst <opensource@vdorst.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Sun, 22 Mar 2020 20:58:50 +0000 (13:58 -0700)]
net: dsa: Fix duplicate frames flooded by learning
[ Upstream commit
0e62f543bed03a64495bd2651d4fe1aa4bcb7fe5 ]
When both the switch and the bridge are learning about new addresses,
switch ports attached to the bridge would see duplicate ARP frames
because both entities would attempt to send them.
Fixes:
5037d532b83d ("net: dsa: add Broadcom tag RX/TX handler")
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zh-yuan Ye [Tue, 24 Mar 2020 08:28:25 +0000 (17:28 +0900)]
net: cbs: Fix software cbs to consider packet sending time
[ Upstream commit
961d0e5b32946703125964f9f5b6321d60f4d706 ]
Currently the software CBS does not consider the packet sending time
when depleting the credits. It caused the throughput to be
Idleslope[kbps] * (Port transmit rate[kbps] / |Sendslope[kbps]|) where
Idleslope * (Port transmit rate / (Idleslope + |Sendslope|)) = Idleslope
is expected. In order to fix the issue above, this patch takes the time
when the packet sending completes into account by moving the anchor time
variable "last" ahead to the send completion time upon transmission and
adding wait when the next dequeue request comes before the send
completion time of the previous packet.
changelog:
V2->V3:
- remove unnecessary whitespace cleanup
- add the checks if port_rate is 0 before division
V1->V2:
- combine variable "send_completed" into "last"
- add the comment for estimate of the packet sending
Fixes:
585d763af09c ("net/sched: Introduce Credit Based Shaper (CBS) qdisc")
Signed-off-by: Zh-yuan Ye <ye.zh-yuan@socionext.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bruno Meneguele [Thu, 12 Mar 2020 23:08:20 +0000 (20:08 -0300)]
net/bpfilter: fix dprintf usage for /dev/kmsg
[ Upstream commit
13d0f7b814d9b4c67e60d8c2820c86ea181e7d99 ]
The bpfilter UMH code was recently changed to log its informative messages to
/dev/kmsg, however this interface doesn't support SEEK_CUR yet, used by
dprintf(). As result dprintf() returns -EINVAL and doesn't log anything.
However there already had some discussions about supporting SEEK_CUR into
/dev/kmsg interface in the past it wasn't concluded. Since the only user of
that from userspace perspective inside the kernel is the bpfilter UMH
(userspace) module it's better to correct it here instead waiting a conclusion
on the interface.
Fixes:
36c4357c63f3 ("net: bpfilter: print umh messages to /dev/kmsg")
Signed-off-by: Bruno Meneguele <bmeneg@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ido Schimmel [Thu, 26 Mar 2020 14:17:33 +0000 (16:17 +0200)]
mlxsw: spectrum_mr: Fix list iteration in error path
[ Upstream commit
f6bf1bafdc2152bb22aff3a4e947f2441a1d49e2 ]
list_for_each_entry_from_reverse() iterates backwards over the list from
the current position, but in the error path we should start from the
previous position.
Fix this by using list_for_each_entry_continue_reverse() instead.
This suppresses the following error from coccinelle:
drivers/net/ethernet/mellanox/mlxsw//spectrum_mr.c:655:34-38: ERROR:
invalid reference to the index variable of the iterator on line 636
Fixes:
c011ec1bbfd6 ("mlxsw: spectrum: Add the multicast routing offloading logic")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ido Schimmel [Thu, 19 Mar 2020 11:25:39 +0000 (13:25 +0200)]
mlxsw: pci: Only issue reset when system is ready
[ Upstream commit
6002059d7882c3512e6ac52fa82424272ddfcd5c ]
During initialization the driver issues a software reset command and
then waits for the system status to change back to "ready" state.
However, before issuing the reset command the driver does not check that
the system is actually in "ready" state. On Spectrum-{1,2} systems this
was always the case as the hardware initialization time is very short.
On Spectrum-3 systems this is no longer the case. This results in the
software reset command timing-out and the driver failing to load:
[ 6.347591] mlxsw_spectrum3 0000:06:00.0: Cmd exec timed-out (opcode=40(ACCESS_REG),opcode_mod=0,in_mod=0)
[ 6.358382] mlxsw_spectrum3 0000:06:00.0: Reg cmd access failed (reg_id=9023(mrsr),type=write)
[ 6.368028] mlxsw_spectrum3 0000:06:00.0: cannot register bus device
[ 6.375274] mlxsw_spectrum3: probe of 0000:06:00.0 failed with error -110
Fix this by waiting for the system to become ready both before issuing
the reset command and afterwards. In case of failure, print the last
system status to aid in debugging.
Fixes:
da382875c616 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Willem de Bruijn [Sun, 22 Mar 2020 17:51:13 +0000 (13:51 -0400)]
macsec: restrict to ethernet devices
[ Upstream commit
b06d072ccc4b1acd0147b17914b7ad1caa1818bb ]
Only attach macsec to ethernet devices.
Syzbot was able to trigger a KMSAN warning in macsec_handle_frame
by attaching to a phonet device.
Macvlan has a similar check in macvlan_port_create.
v1->v2
- fix commit message typo
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qian Cai [Fri, 20 Mar 2020 02:54:21 +0000 (22:54 -0400)]
ipv4: fix a RCU-list lock in inet_dump_fib()
[ Upstream commit
dddeb30bfc43926620f954266fd12c65a7206f07 ]
There is a place,
inet_dump_fib()
fib_table_dump
fn_trie_dump_leaf()
hlist_for_each_entry_rcu()
without rcu_read_lock() will trigger a warning,
WARNING: suspicious RCU usage
-----------------------------
net/ipv4/fib_trie.c:2216 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/1923:
#0:
ffffffff8ce76e40 (rtnl_mutex){+.+.}, at: netlink_dump+0xd6/0x840
Call Trace:
dump_stack+0xa1/0xea
lockdep_rcu_suspicious+0x103/0x10d
fn_trie_dump_leaf+0x581/0x590
fib_table_dump+0x15f/0x220
inet_dump_fib+0x4ad/0x5d0
netlink_dump+0x350/0x840
__netlink_dump_start+0x315/0x3e0
rtnetlink_rcv_msg+0x4d1/0x720
netlink_rcv_skb+0xf0/0x220
rtnetlink_rcv+0x15/0x20
netlink_unicast+0x306/0x460
netlink_sendmsg+0x44b/0x770
__sys_sendto+0x259/0x270
__x64_sys_sendto+0x80/0xa0
do_syscall_64+0x69/0xf4
entry_SYSCALL_64_after_hwframe+0x49/0xb3
Fixes:
18a8021a7be3 ("net/ipv4: Plumb support for filtering route dumps")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Taehee Yoo [Sat, 21 Mar 2020 06:46:50 +0000 (06:46 +0000)]
hsr: fix general protection fault in hsr_addr_is_self()
[ Upstream commit
3a303cfdd28d5f930a307c82e8a9d996394d5ebd ]
The port->hsr is used in the hsr_handle_frame(), which is a
callback of rx_handler.
hsr master and slaves are initialized in hsr_add_port().
This function initializes several pointers, which includes port->hsr after
registering rx_handler.
So, in the rx_handler routine, un-initialized pointer would be used.
In order to fix this, pointers should be initialized before
registering rx_handler.
Test commands:
ip netns del left
ip netns del right
modprobe -rv veth
modprobe -rv hsr
killall ping
modprobe hsr
ip netns add left
ip netns add right
ip link add veth0 type veth peer name veth1
ip link add veth2 type veth peer name veth3
ip link add veth4 type veth peer name veth5
ip link set veth1 netns left
ip link set veth3 netns right
ip link set veth4 netns left
ip link set veth5 netns right
ip link set veth0 up
ip link set veth2 up
ip link set veth0 address fc:00:00:00:00:01
ip link set veth2 address fc:00:00:00:00:02
ip netns exec left ip link set veth1 up
ip netns exec left ip link set veth4 up
ip netns exec right ip link set veth3 up
ip netns exec right ip link set veth5 up
ip link add hsr0 type hsr slave1 veth0 slave2 veth2
ip a a 192.168.100.1/24 dev hsr0
ip link set hsr0 up
ip netns exec left ip link add hsr1 type hsr slave1 veth1 slave2 veth4
ip netns exec left ip a a 192.168.100.2/24 dev hsr1
ip netns exec left ip link set hsr1 up
ip netns exec left ip n a 192.168.100.1 dev hsr1 lladdr \
fc:00:00:00:00:01 nud permanent
ip netns exec left ip n r 192.168.100.1 dev hsr1 lladdr \
fc:00:00:00:00:01 nud permanent
for i in {1..100}
do
ip netns exec left ping 192.168.100.1 &
done
ip netns exec left hping3 192.168.100.1 -2 --flood &
ip netns exec right ip link add hsr2 type hsr slave1 veth3 slave2 veth5
ip netns exec right ip a a 192.168.100.3/24 dev hsr2
ip netns exec right ip link set hsr2 up
ip netns exec right ip n a 192.168.100.1 dev hsr2 lladdr \
fc:00:00:00:00:02 nud permanent
ip netns exec right ip n r 192.168.100.1 dev hsr2 lladdr \
fc:00:00:00:00:02 nud permanent
for i in {1..100}
do
ip netns exec right ping 192.168.100.1 &
done
ip netns exec right hping3 192.168.100.1 -2 --flood &
while :
do
ip link add hsr0 type hsr slave1 veth0 slave2 veth2
ip a a 192.168.100.1/24 dev hsr0
ip link set hsr0 up
ip link del hsr0
done
Splat looks like:
[ 120.954938][ C0] general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1]I
[ 120.957761][ C0] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[ 120.959064][ C0] CPU: 0 PID: 1511 Comm: hping3 Not tainted 5.6.0-rc5+ #460
[ 120.960054][ C0] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 120.962261][ C0] RIP: 0010:hsr_addr_is_self+0x65/0x2a0 [hsr]
[ 120.963149][ C0] Code: 44 24 18 70 73 2f c0 48 c1 eb 03 48 8d 04 13 c7 00 f1 f1 f1 f1 c7 40 04 00 f2 f2 f2 4
[ 120.966277][ C0] RSP: 0018:
ffff8880d9c09af0 EFLAGS:
00010206
[ 120.967293][ C0] RAX:
0000000000000006 RBX:
1ffff1101b38135f RCX:
0000000000000000
[ 120.968516][ C0] RDX:
dffffc0000000000 RSI:
ffff8880d17cb208 RDI:
0000000000000000
[ 120.969718][ C0] RBP:
0000000000000030 R08:
ffffed101b3c0e3c R09:
0000000000000001
[ 120.972203][ C0] R10:
0000000000000001 R11:
ffffed101b3c0e3b R12:
0000000000000000
[ 120.973379][ C0] R13:
ffff8880aaf80100 R14:
ffff8880aaf800f2 R15:
ffff8880aaf80040
[ 120.974410][ C0] FS:
00007f58e693f740(0000) GS:
ffff8880d9c00000(0000) knlGS:
0000000000000000
[ 120.979794][ C0] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 120.980773][ C0] CR2:
00007ffcb8b38f29 CR3:
00000000afe8e001 CR4:
00000000000606f0
[ 120.981945][ C0] Call Trace:
[ 120.982411][ C0] <IRQ>
[ 120.982848][ C0] ? hsr_add_node+0x8c0/0x8c0 [hsr]
[ 120.983522][ C0] ? rcu_read_lock_held+0x90/0xa0
[ 120.984159][ C0] ? rcu_read_lock_sched_held+0xc0/0xc0
[ 120.984944][ C0] hsr_handle_frame+0x1db/0x4e0 [hsr]
[ 120.985597][ C0] ? hsr_nl_nodedown+0x2b0/0x2b0 [hsr]
[ 120.986289][ C0] __netif_receive_skb_core+0x6bf/0x3170
[ 120.992513][ C0] ? check_chain_key+0x236/0x5d0
[ 120.993223][ C0] ? do_xdp_generic+0x1460/0x1460
[ 120.993875][ C0] ? register_lock_class+0x14d0/0x14d0
[ 120.994609][ C0] ? __netif_receive_skb_one_core+0x8d/0x160
[ 120.995377][ C0] __netif_receive_skb_one_core+0x8d/0x160
[ 120.996204][ C0] ? __netif_receive_skb_core+0x3170/0x3170
[ ... ]
Reported-by: syzbot+fcf5dd39282ceb27108d@syzkaller.appspotmail.com
Fixes:
c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Westphal [Sat, 14 Mar 2020 07:18:42 +0000 (08:18 +0100)]
geneve: move debug check after netdev unregister
[ Upstream commit
0fda7600c2e174fe27e9cf02e78e345226e441fa ]
The debug check must be done after unregister_netdevice_many() call --
the list_del() for this is done inside .ndo_stop.
Fixes:
2843a25348f8 ("geneve: speedup geneve tunnels dismantle")
Reported-and-tested-by: <syzbot+68a8ed58e3d17c700de5@syzkaller.appspotmail.com>
Cc: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rahul Lakkireddy [Thu, 19 Mar 2020 17:38:10 +0000 (23:08 +0530)]
cxgb4: fix Txq restart check during backpressure
[ Upstream commit
f1f20a8666c55cb534b8f3fc1130eebf01a06155 ]
Driver reclaims descriptors in much smaller batches, even if hardware
indicates more to reclaim, during backpressure. So, fix the check to
restart the Txq during backpressure, by looking at how many
descriptors hardware had indicated to reclaim, and not on how many
descriptors that driver had actually reclaimed. Once the Txq is
restarted, driver will reclaim even more descriptors when Tx path
is entered again.
Fixes:
d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rahul Lakkireddy [Thu, 19 Mar 2020 17:38:09 +0000 (23:08 +0530)]
cxgb4: fix throughput drop during Tx backpressure
[ Upstream commit
7affd80802afb6ca92dba47d768632fbde365241 ]
commit
7c3bebc3d868 ("cxgb4: request the TX CIDX updates to status page")
reverted back to getting Tx CIDX updates via DMA, instead of interrupts,
introduced by commit
d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE
doorbell queue timer")
However, it missed reverting back several code changes where Tx CIDX
updates are not explicitly requested during backpressure when using
interrupt mode. These missed changes cause slow recovery during
backpressure because the corresponding interrupt no longer comes and
hence results in Tx throughput drop.
So, revert back these missed code changes, as well, which will allow
explicitly requesting Tx CIDX updates when backpressure happens.
This enables the corresponding interrupt with Tx CIDX update message
to get generated and hence speed up recovery and restore back
throughput.
Fixes:
7c3bebc3d868 ("cxgb4: request the TX CIDX updates to status page")
Fixes:
d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rafael J. Wysocki [Thu, 28 Nov 2019 22:50:40 +0000 (23:50 +0100)]
ACPI: PM: s2idle: Rework ACPI events synchronization
commit
024aa8732acb7d2503eae43c3fe3504d0a8646d0 upstream.
Note that the EC GPE processing need not be synchronized in
acpi_s2idle_wake() after invoking acpi_ec_dispatch_gpe(), because
that function checks the GPE status and dispatches its handler if
need be and the SCI action handler is not going to run anyway at
that point.
Moreover, it is better to drain all of the pending ACPI events
before restoring the working-state configuration of GPEs in
acpi_s2idle_restore(), because those events are likely to be related
to system wakeup, in which case they will not be relevant going
forward.
Rework the code to take these observations into account.
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ulf Hansson [Tue, 24 Mar 2020 18:07:38 +0000 (19:07 +0100)]
mmc: sdhci-tegra: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY
[ Upstream commit
d2f8bfa4bff5028bc40ed56b4497c32e05b0178f ]
It has turned out that the sdhci-tegra controller requires the R1B response,
for commands that has this response associated with them. So, converting
from an R1B to an R1 response for a CMD6 for example, leads to problems
with the HW busy detection support.
Fix this by informing the mmc core about the requirement, via setting the
host cap, MMC_CAP_NEED_RSP_BUSY.
Reported-by: Bitan Biswas <bbiswas@nvidia.com>
Reported-by: Peter Geis <pgwipeout@gmail.com>
Suggested-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Cc: <stable@vger.kernel.org>
Tested-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Tested-By: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ulf Hansson [Tue, 24 Mar 2020 18:07:37 +0000 (19:07 +0100)]
mmc: sdhci-omap: Fix busy detection by enabling MMC_CAP_NEED_RSP_BUSY
[ Upstream commit
055e04830d4544c57f2a5192a26c9e25915c29c0 ]
It has turned out that the sdhci-omap controller requires the R1B response,
for commands that has this response associated with them. So, converting
from an R1B to an R1 response for a CMD6 for example, leads to problems
with the HW busy detection support.
Fix this by informing the mmc core about the requirement, via setting the
host cap, MMC_CAP_NEED_RSP_BUSY.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Reported-by: Faiz Abbas <faiz_abbas@ti.com>
Cc: <stable@vger.kernel.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ulf Hansson [Tue, 24 Mar 2020 18:07:36 +0000 (19:07 +0100)]
mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for eMMC sleep command
[ Upstream commit
18d200460cd73636d4f20674085c39e32b4e0097 ]
The busy timeout for the CMD5 to put the eMMC into sleep state, is specific
to the card. Potentially the timeout may exceed the host->max_busy_timeout.
If that becomes the case, mmc_sleep() converts from using an R1B response
to an R1 response, as to prevent the host from doing HW busy detection.
However, it has turned out that some hosts requires an R1B response no
matter what, so let's respect that via checking MMC_CAP_NEED_RSP_BUSY. Note
that, if the R1B gets enforced, the host becomes fully responsible of
managing the needed busy timeout, in one way or the other.
Suggested-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200311092036.16084-1-ulf.hansson@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ulf Hansson [Tue, 24 Mar 2020 18:07:35 +0000 (19:07 +0100)]
mmc: core: Respect MMC_CAP_NEED_RSP_BUSY for erase/trim/discard
[ Upstream commit
43cc64e5221cc6741252b64bc4531dd1eefb733d ]
The busy timeout that is computed for each erase/trim/discard operation,
can become quite long and may thus exceed the host->max_busy_timeout. If
that becomes the case, mmc_do_erase() converts from using an R1B response
to an R1 response, as to prevent the host from doing HW busy detection.
However, it has turned out that some hosts requires an R1B response no
matter what, so let's respect that via checking MMC_CAP_NEED_RSP_BUSY. Note
that, if the R1B gets enforced, the host becomes fully responsible of
managing the needed busy timeout, in one way or the other.
Suggested-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Cc: <stable@vger.kernel.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Tested-by: Faiz Abbas <faiz_abbas@ti.com>
Tested-By: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ulf Hansson [Tue, 24 Mar 2020 18:07:34 +0000 (19:07 +0100)]
mmc: core: Allow host controllers to require R1B for CMD6
[ Upstream commit
1292e3efb149ee21d8d33d725eeed4e6b1ade963 ]
It has turned out that some host controllers can't use R1B for CMD6 and
other commands that have R1B associated with them. Therefore invent a new
host cap, MMC_CAP_NEED_RSP_BUSY to let them specify this.
In __mmc_switch(), let's check the flag and use it to prevent R1B responses
from being converted into R1. Note that, this also means that the host are
on its own, when it comes to manage the busy timeout.
Suggested-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Cc: <stable@vger.kernel.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Tested-by: Faiz Abbas <faiz_abbas@ti.com>
Tested-By: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Wed, 25 Mar 2020 07:26:00 +0000 (08:26 +0100)]
Linux 5.4.28
Johan Hovold [Thu, 12 Mar 2020 11:01:51 +0000 (12:01 +0100)]
staging: greybus: loopback_test: fix potential path truncations
commit
ae62cf5eb2792d9a818c2d93728ed92119357017 upstream.
Newer GCC warns about possible truncations of two generated path names as
we're concatenating the configurable sysfs and debugfs path prefixes
with a filename and placing the results in buffers of the same size as
the maximum length of the prefixes.
snprintf(d->name, MAX_STR_LEN, "gb_loopback%u", dev_id);
snprintf(d->sysfs_entry, MAX_SYSFS_PATH, "%s%s/",
t->sysfs_prefix, d->name);
snprintf(d->debugfs_entry, MAX_SYSFS_PATH, "%sraw_latency_%s",
t->debugfs_prefix, d->name);
Fix this by separating the maximum path length from the maximum prefix
length and reducing the latter enough to fit the generated strings.
Note that we also need to reduce the device-name buffer size as GCC
isn't smart enough to figure out that we ever only used MAX_STR_LEN
bytes of it.
Fixes:
6b0658f68786 ("greybus: tools: Add tools directory to greybus repo and add loopback")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200312110151.22028-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Thu, 12 Mar 2020 11:01:50 +0000 (12:01 +0100)]
staging: greybus: loopback_test: fix potential path truncation
commit
f16023834863932f95dfad13fac3fc47f77d2f29 upstream.
Newer GCC warns about a possible truncation of a generated sysfs path
name as we're concatenating a directory path with a file name and
placing the result in a buffer that is half the size of the maximum
length of the directory path (which is user controlled).
loopback_test.c: In function 'open_poll_files':
loopback_test.c:651:31: warning: '%s' directive output may be truncated writing up to 511 bytes into a region of size 255 [-Wformat-truncation=]
651 | snprintf(buf, sizeof(buf), "%s%s", dev->sysfs_entry, "iteration_count");
| ^~
loopback_test.c:651:3: note: 'snprintf' output between 16 and 527 bytes into a destination of size 255
651 | snprintf(buf, sizeof(buf), "%s%s", dev->sysfs_entry, "iteration_count");
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by making sure the buffer is large enough the concatenated
strings.
Fixes:
6b0658f68786 ("greybus: tools: Add tools directory to greybus repo and add loopback")
Fixes:
9250c0ee2626 ("greybus: Loopback_test: use poll instead of inotify")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200312110151.22028-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jernej Skrabec [Wed, 4 Mar 2020 23:25:09 +0000 (00:25 +0100)]
drm/bridge: dw-hdmi: fix AVI frame colorimetry
commit
e8dca30f7118461d47e1c3510d0e31b277439151 upstream.
CTA-861-F explicitly states that for RGB colorspace colorimetry should
be set to "none". Fix that.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes:
def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304232512.51616-2-jernej.skrabec@siol.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sagi Grimberg [Thu, 12 Mar 2020 23:06:38 +0000 (16:06 -0700)]
nvmet-tcp: set MSG_MORE only if we actually have more to send
commit
98fd5c723730f560e5bea919a64ac5b83d45eb72 upstream.
When we send PDU data, we want to optimize the tcp stack
operation if we have more data to send. So when we set MSG_MORE
when:
- We have more fragments coming in the batch, or
- We have a more data to send in this PDU
- We don't have a data digest trailer
- We optimize with the SUCCESS flag and omit the NVMe completion
(used if sq_head pointer update is disabled)
This addresses a regression in QD=1 with SUCCESS flag optimization
as we unconditionally set MSG_MORE when we didn't actually have
more data to send.
Fixes:
70583295388a ("nvmet-tcp: implement C2HData SUCCESS optimization")
Reported-by: Mark Wunderlich <mark.wunderlich@intel.com>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cristian Marussi [Wed, 11 Mar 2020 17:12:45 +0000 (17:12 +0000)]
arm64: smp: fix crash_smp_send_stop() behaviour
commit
f50b7dacccbab2b9e3ef18f52a6dcc18ed2050b9 upstream.
On a system configured to trigger a crash_kexec() reboot, when only one CPU
is online and another CPU panics while starting-up, crash_smp_send_stop()
will fail to send any STOP message to the other already online core,
resulting in fail to freeze and registers not properly saved.
Moreover even if the proper messages are sent (case CPUs > 2)
it will similarly fail to account for the booting CPU when executing
the final stop wait-loop, so potentially resulting in some CPU not
been waited for shutdown before rebooting.
A tangible effect of this behaviour can be observed when, after a panic
with kexec enabled and loaded, on the following reboot triggered by kexec,
the cpu that could not be successfully stopped fails to come back online:
[ 362.291022] ------------[ cut here ]------------
[ 362.291525] kernel BUG at arch/arm64/kernel/cpufeature.c:886!
[ 362.292023] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 362.292400] Modules linked in:
[ 362.292970] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.6.0-rc4-00003-gc780b890948a #105
[ 362.293136] Hardware name: Foundation-v8A (DT)
[ 362.293382] pstate:
200001c5 (nzCv dAIF -PAN -UAO)
[ 362.294063] pc : has_cpuid_feature+0xf0/0x348
[ 362.294177] lr : verify_local_elf_hwcaps+0x84/0xe8
[ 362.294280] sp :
ffff800011b1bf60
[ 362.294362] x29:
ffff800011b1bf60 x28:
0000000000000000
[ 362.294534] x27:
0000000000000000 x26:
0000000000000000
[ 362.294631] x25:
0000000000000000 x24:
ffff80001189a25c
[ 362.294718] x23:
0000000000000000 x22:
0000000000000000
[ 362.294803] x21:
ffff8000114aa018 x20:
ffff800011156a00
[ 362.294897] x19:
ffff800010c944a0 x18:
0000000000000004
[ 362.294987] x17:
0000000000000000 x16:
0000000000000000
[ 362.295073] x15:
00004e53b831ae3c x14:
00004e53b831ae3c
[ 362.295165] x13:
0000000000000384 x12:
0000000000000000
[ 362.295251] x11:
0000000000000000 x10:
00400032b5503510
[ 362.295334] x9 :
0000000000000000 x8 :
ffff800010c7e204
[ 362.295426] x7 :
00000000410fd0f0 x6 :
0000000000000001
[ 362.295508] x5 :
00000000410fd0f0 x4 :
0000000000000000
[ 362.295592] x3 :
0000000000000000 x2 :
ffff8000100939d8
[ 362.295683] x1 :
0000000000180420 x0 :
0000000000180480
[ 362.296011] Call trace:
[ 362.296257] has_cpuid_feature+0xf0/0x348
[ 362.296350] verify_local_elf_hwcaps+0x84/0xe8
[ 362.296424] check_local_cpu_capabilities+0x44/0x128
[ 362.296497] secondary_start_kernel+0xf4/0x188
[ 362.296998] Code:
52805001 72a00301 6b01001f 54000ec0 (
d4210000)
[ 362.298652] SMP: stopping secondary CPUs
[ 362.300615] Starting crashdump kernel...
[ 362.301168] Bye!
[ 0.000000] Booting Linux on physical CPU 0x0000000003 [0x410fd0f0]
[ 0.000000] Linux version 5.6.0-rc4-00003-gc780b890948a (crimar01@e120937-lin) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #105 SMP PREEMPT Fri Mar 6 17:00:42 GMT 2020
[ 0.000000] Machine model: Foundation-v8A
[ 0.000000] earlycon: pl11 at MMIO 0x000000001c090000 (options '')
[ 0.000000] printk: bootconsole [pl11] enabled
.....
[ 0.138024] rcu: Hierarchical SRCU implementation.
[ 0.153472] its@
2f020000: unable to locate ITS domain
[ 0.154078] its@
2f020000: Unable to locate ITS domain
[ 0.157541] EFI services will not be available.
[ 0.175395] smp: Bringing up secondary CPUs ...
[ 0.209182] psci: failed to boot CPU1 (-22)
[ 0.209377] CPU1: failed to boot: -22
[ 0.274598] Detected PIPT I-cache on CPU2
[ 0.278707] GICv3: CPU2: found redistributor 1 region 0:0x000000002f120000
[ 0.285212] CPU2: Booted secondary processor 0x0000000001 [0x410fd0f0]
[ 0.369053] Detected PIPT I-cache on CPU3
[ 0.372947] GICv3: CPU3: found redistributor 2 region 0:0x000000002f140000
[ 0.378664] CPU3: Booted secondary processor 0x0000000002 [0x410fd0f0]
[ 0.401707] smp: Brought up 1 node, 3 CPUs
[ 0.404057] SMP: Total of 3 processors activated.
Make crash_smp_send_stop() account also for the online status of the
calling CPU while evaluating how many CPUs are effectively online: this way
the right number of STOPs is sent and all other stopped-cores's registers
are properly saved.
Fixes:
78fd584cdec05 ("arm64: kdump: implement machine_crash_shutdown()")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cristian Marussi [Wed, 11 Mar 2020 17:12:44 +0000 (17:12 +0000)]
arm64: smp: fix smp_send_stop() behaviour
commit
d0bab0c39e32d39a8c5cddca72e5b4a3059fe050 upstream.
On a system with only one CPU online, when another one CPU panics while
starting-up, smp_send_stop() will fail to send any STOP message to the
other already online core, resulting in a system still responsive and
alive at the end of the panic procedure.
[ 186.700083] CPU3: shutdown
[ 187.075462] CPU2: shutdown
[ 187.162869] CPU1: shutdown
[ 188.689998] ------------[ cut here ]------------
[ 188.691645] kernel BUG at arch/arm64/kernel/cpufeature.c:886!
[ 188.692079] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 188.692444] Modules linked in:
[ 188.693031] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.6.0-rc4-00001-g338d25c35a98 #104
[ 188.693175] Hardware name: Foundation-v8A (DT)
[ 188.693492] pstate:
200001c5 (nzCv dAIF -PAN -UAO)
[ 188.694183] pc : has_cpuid_feature+0xf0/0x348
[ 188.694311] lr : verify_local_elf_hwcaps+0x84/0xe8
[ 188.694410] sp :
ffff800011b1bf60
[ 188.694536] x29:
ffff800011b1bf60 x28:
0000000000000000
[ 188.694707] x27:
0000000000000000 x26:
0000000000000000
[ 188.694801] x25:
0000000000000000 x24:
ffff80001189a25c
[ 188.694905] x23:
0000000000000000 x22:
0000000000000000
[ 188.694996] x21:
ffff8000114aa018 x20:
ffff800011156a38
[ 188.695089] x19:
ffff800010c944a0 x18:
0000000000000004
[ 188.695187] x17:
0000000000000000 x16:
0000000000000000
[ 188.695280] x15:
0000249dbde5431e x14:
0262cbe497efa1fa
[ 188.695371] x13:
0000000000000002 x12:
0000000000002592
[ 188.695472] x11:
0000000000000080 x10:
00400032b5503510
[ 188.695572] x9 :
0000000000000000 x8 :
ffff800010c80204
[ 188.695659] x7 :
00000000410fd0f0 x6 :
0000000000000001
[ 188.695750] x5 :
00000000410fd0f0 x4 :
0000000000000000
[ 188.695836] x3 :
0000000000000000 x2 :
ffff8000100939d8
[ 188.695919] x1 :
0000000000180420 x0 :
0000000000180480
[ 188.696253] Call trace:
[ 188.696410] has_cpuid_feature+0xf0/0x348
[ 188.696504] verify_local_elf_hwcaps+0x84/0xe8
[ 188.696591] check_local_cpu_capabilities+0x44/0x128
[ 188.696666] secondary_start_kernel+0xf4/0x188
[ 188.697150] Code:
52805001 72a00301 6b01001f 54000ec0 (
d4210000)
[ 188.698639] ---[ end trace
3f12ca47652f7b72 ]---
[ 188.699160] Kernel panic - not syncing: Attempted to kill the idle task!
[ 188.699546] Kernel Offset: disabled
[ 188.699828] CPU features: 0x00004,
20c02008
[ 188.700012] Memory Limit: none
[ 188.700538] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---
[root@arch ~]# echo Helo
Helo
[root@arch ~]# cat /proc/cpuinfo | grep proce
processor : 0
Make smp_send_stop() account also for the online status of the calling CPU
while evaluating how many CPUs are effectively online: this way, the right
number of STOPs is sent, so enforcing a proper freeze of the system at the
end of panic even under the above conditions.
Fixes:
08e875c16a16c ("arm64: SMP support")
Reported-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kai-Heng Feng [Wed, 11 Mar 2020 06:13:28 +0000 (14:13 +0800)]
ALSA: hda/realtek: Fix pop noise on ALC225
commit
3b36b13d5e69d6f51ff1c55d1b404a74646c9757 upstream.
Commit
317d9313925c ("ALSA: hda/realtek - Set default power save node to
0") makes the ALC225 have pop noise on S3 resume and cold boot.
So partially revert this commit for ALC225 to fix the regression.
Fixes:
317d9313925c ("ALSA: hda/realtek - Set default power save node to 0")
BugLink: https://bugs.launchpad.net/bugs/1866357
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200311061328.17614-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Sun, 8 Mar 2020 18:07:17 +0000 (19:07 +0100)]
futex: Unbreak futex hashing
commit
8d67743653dce5a0e7aa500fcccb237cde7ad88e upstream.
The recent futex inode life time fix changed the ordering of the futex key
union struct members, but forgot to adjust the hash function accordingly,
As a result the hashing omits the leading 64bit and even hashes beyond the
futex key causing a bad hash distribution which led to a ~100% performance
regression.
Hand in the futex key pointer instead of a random struct member and make
the size calculation based of the struct offset.
Fixes:
8019ad13ef7f ("futex: Fix inode life-time issue")
Reported-by: Rong Chen <rong.a.chen@intel.com>
Decoded-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Rong Chen <rong.a.chen@intel.com>
Link: https://lkml.kernel.org/r/87h7yy90ve.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Wed, 4 Mar 2020 10:28:31 +0000 (11:28 +0100)]
futex: Fix inode life-time issue
commit
8019ad13ef7f64be44d4f892af9c840179009254 upstream.
As reported by Jann, ihold() does not in fact guarantee inode
persistence. And instead of making it so, replace the usage of inode
pointers with a per boot, machine wide, unique inode identifier.
This sequence number is global, but shared (file backed) futexes are
rare enough that this should not become a performance issue.
Reported-by: Jann Horn <jannh@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joerg Roedel [Sun, 22 Mar 2020 01:22:41 +0000 (18:22 -0700)]
x86/mm: split vmalloc_sync_all()
commit
763802b53a427ed3cbd419dbba255c414fdd9e7c upstream.
Commit
3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in
__purge_vmap_area_lazy()") introduced a call to vmalloc_sync_all() in
the vunmap() code-path. While this change was necessary to maintain
correctness on x86-32-pae kernels, it also adds additional cycles for
architectures that don't need it.
Specifically on x86-64 with CONFIG_VMAP_STACK=y some people reported
severe performance regressions in micro-benchmarks because it now also
calls the x86-64 implementation of vmalloc_sync_all() on vunmap(). But
the vmalloc_sync_all() implementation on x86-64 is only needed for newly
created mappings.
To avoid the unnecessary work on x86-64 and to gain the performance
back, split up vmalloc_sync_all() into two functions:
* vmalloc_sync_mappings(), and
* vmalloc_sync_unmappings()
Most call-sites to vmalloc_sync_all() only care about new mappings being
synchronized. The only exception is the new call-site added in the
above mentioned commit.
Shile Zhang directed us to a report of an 80% regression in reaim
throughput.
Fixes:
3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Borislav Petkov <bp@suse.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [GHES]
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20191009124418.8286-1-joro@8bytes.org
Link: https://lists.01.org/hyperkitty/list/lkp@lists.01.org/thread/4D3JPPHBNOSPFK2KEPC6KGKS6J25AIDB/
Link: http://lkml.kernel.org/r/20191113095530.228959-1-shile.zhang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qian Cai [Sun, 22 Mar 2020 01:22:17 +0000 (18:22 -0700)]
page-flags: fix a crash at SetPageError(THP_SWAP)
commit
d72520ad004a8ce18a6ba6cde317f0081b27365a upstream.
Commit
bd4c82c22c36 ("mm, THP, swap: delay splitting THP after swapped
out") supported writing THP to a swap device but forgot to upgrade an
older commit
df8c94d13c7e ("page-flags: define behavior of FS/IO-related
flags on compound pages") which could trigger a crash during THP
swapping out with DEBUG_VM_PGFLAGS=y,
kernel BUG at include/linux/page-flags.h:317!
page dumped because: VM_BUG_ON_PAGE(1 && PageCompound(page))
page:
fffff3b2ec3a8000 refcount:512 mapcount:0 mapping:
000000009eb0338c index:0x7f6e58200 head:
fffff3b2ec3a8000 order:9 compound_mapcount:0 compound_pincount:0
anon flags: 0x45fffe0000d8454(uptodate|lru|workingset|owner_priv_1|writeback|head|reclaim|swapbacked)
end_swap_bio_write()
SetPageError(page)
VM_BUG_ON_PAGE(1 && PageCompound(page))
<IRQ>
bio_endio+0x297/0x560
dec_pending+0x218/0x430 [dm_mod]
clone_endio+0xe4/0x2c0 [dm_mod]
bio_endio+0x297/0x560
blk_update_request+0x201/0x920
scsi_end_request+0x6b/0x4b0
scsi_io_completion+0x509/0x7e0
scsi_finish_command+0x1ed/0x2a0
scsi_softirq_done+0x1c9/0x1d0
__blk_mqnterrupt+0xf/0x20
</IRQ>
Fix by checking PF_NO_TAIL in those places instead.
Fixes:
bd4c82c22c36 ("mm, THP, swap: delay splitting THP after swapped out")
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200310235846.1319-1-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vlastimil Babka [Sun, 22 Mar 2020 01:22:37 +0000 (18:22 -0700)]
mm, slub: prevent kmalloc_node crashes and memory leaks
commit
0715e6c516f106ed553828a671d30ad9a3431536 upstream.
Sachin reports [1] a crash in SLUB __slab_alloc():
BUG: Kernel NULL pointer dereference on read at 0x000073b0
Faulting instruction address: 0xc0000000003d55f4
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 19 PID: 1 Comm: systemd Not tainted 5.6.0-rc2-next-
20200218-autotest #1
NIP:
c0000000003d55f4 LR:
c0000000003d5b94 CTR:
0000000000000000
REGS:
c0000008b37836d0 TRAP: 0300 Not tainted (5.6.0-rc2-next-
20200218-autotest)
MSR:
8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR:
24004844 XER:
00000000
CFAR:
c00000000000dec4 DAR:
00000000000073b0 DSISR:
40000000 IRQMASK: 1
GPR00:
c0000000003d5b94 c0000008b3783960 c00000000155d400 c0000008b301f500
GPR04:
0000000000000dc0 0000000000000002 c0000000003443d8 c0000008bb398620
GPR08:
00000008ba2f0000 0000000000000001 0000000000000000 0000000000000000
GPR12:
0000000024004844 c00000001ec52a00 0000000000000000 0000000000000000
GPR16:
c0000008a1b20048 c000000001595898 c000000001750c18 0000000000000002
GPR20:
c000000001750c28 c000000001624470 0000000fffffffe0 5deadbeef0000122
GPR24:
0000000000000001 0000000000000dc0 0000000000000002 c0000000003443d8
GPR28:
c0000008b301f500 c0000008bb398620 0000000000000000 c00c000002287180
NIP ___slab_alloc+0x1f4/0x760
LR __slab_alloc+0x34/0x60
Call Trace:
___slab_alloc+0x334/0x760 (unreliable)
__slab_alloc+0x34/0x60
__kmalloc_node+0x110/0x490
kvmalloc_node+0x58/0x110
mem_cgroup_css_online+0x108/0x270
online_css+0x48/0xd0
cgroup_apply_control_enable+0x2ec/0x4d0
cgroup_mkdir+0x228/0x5f0
kernfs_iop_mkdir+0x90/0xf0
vfs_mkdir+0x110/0x230
do_mkdirat+0xb0/0x1a0
system_call+0x5c/0x68
This is a PowerPC platform with following NUMA topology:
available: 2 nodes (0-1)
node 0 cpus:
node 0 size: 0 MB
node 0 free: 0 MB
node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
node 1 size: 35247 MB
node 1 free: 30907 MB
node distances:
node 0 1
0: 10 40
1: 40 10
possible numa nodes: 0-31
This only happens with a mmotm patch "mm/memcontrol.c: allocate
shrinker_map on appropriate NUMA node" [2] which effectively calls
kmalloc_node for each possible node. SLUB however only allocates
kmem_cache_node on online N_NORMAL_MEMORY nodes, and relies on
node_to_mem_node to return such valid node for other nodes since commit
a561ce00b09e ("slub: fall back to node_to_mem_node() node if allocating
on memoryless node"). This is however not true in this configuration
where the _node_numa_mem_ array is not initialized for nodes 0 and 2-31,
thus it contains zeroes and get_partial() ends up accessing
non-allocated kmem_cache_node.
A related issue was reported by Bharata (originally by Ramachandran) [3]
where a similar PowerPC configuration, but with mainline kernel without
patch [2] ends up allocating large amounts of pages by kmalloc-1k
kmalloc-512. This seems to have the same underlying issue with
node_to_mem_node() not behaving as expected, and might probably also
lead to an infinite loop with CONFIG_SLUB_CPU_PARTIAL [4].
This patch should fix both issues by not relying on node_to_mem_node()
anymore and instead simply falling back to NUMA_NO_NODE, when
kmalloc_node(node) is attempted for a node that's not online, or has no
usable memory. The "usable memory" condition is also changed from
node_present_pages() to N_NORMAL_MEMORY node state, as that is exactly
the condition that SLUB uses to allocate kmem_cache_node structures.
The check in get_partial() is removed completely, as the checks in
___slab_alloc() are now sufficient to prevent get_partial() being
reached with an invalid node.
[1] https://lore.kernel.org/linux-next/
3381CD91-AB3D-4773-BA04-
E7A072A63968@linux.vnet.ibm.com/
[2] https://lore.kernel.org/linux-mm/
fff0e636-4c36-ed10-281c-
8cdb0687c839@virtuozzo.com/
[3] https://lore.kernel.org/linux-mm/
20200317092624.GB22538@in.ibm.com/
[4] https://lore.kernel.org/linux-mm/
088b5996-faae-8a56-ef9c-
5b567125ae54@suse.cz/
Fixes:
a561ce00b09e ("slub: fall back to node_to_mem_node() node if allocating on memoryless node")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Reported-by: PUVICHAKRAVARTHY RAMACHANDRAN <puvichakravarthy@in.ibm.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christopher Lameter <cl@linux.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200320115533.9604-1-vbabka@suse.cz
Debugged-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Tue, 17 Mar 2020 18:04:09 +0000 (11:04 -0700)]
mm: slub: be more careful about the double cmpxchg of freelist
commit
5076190daded2197f62fe92cf69674488be44175 upstream.
This is just a cleanup addition to Jann's fix to properly update the
transaction ID for the slub slowpath in commit
fd4d9c7d0c71 ("mm: slub:
add missing TID bump..").
The transaction ID is what protects us against any concurrent accesses,
but we should really also make sure to make the 'freelist' comparison
itself always use the same freelist value that we then used as the new
next free pointer.
Jann points out that if we do all of this carefully, we could skip the
transaction ID update for all the paths that only remove entries from
the lists, and only update the TID when adding entries (to avoid the ABA
issue with cmpxchg and list handling re-adding a previously seen value).
But this patch just does the "make sure to cmpxchg the same value we
used" rather than then try to be clever.
Acked-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roman Penyaev [Sun, 22 Mar 2020 01:22:30 +0000 (18:22 -0700)]
epoll: fix possible lost wakeup on epoll_ctl() path
commit
1b53734bd0b2feed8e7761771b2e76fc9126ea0c upstream.
This fixes possible lost wakeup introduced by commit
a218cc491420.
Originally modifications to ep->wq were serialized by ep->wq.lock, but
in commit
a218cc491420 ("epoll: use rwlock in order to reduce
ep_poll_callback() contention") a new rw lock was introduced in order to
relax fd event path, i.e. callers of ep_poll_callback() function.
After the change ep_modify and ep_insert (both are called on epoll_ctl()
path) were switched to ep->lock, but ep_poll (epoll_wait) was using
ep->wq.lock on wqueue list modification.
The bug doesn't lead to any wqueue list corruptions, because wake up
path and list modifications were serialized by ep->wq.lock internally,
but actual waitqueue_active() check prior wake_up() call can be
reordered with modifications of ep ready list, thus wake up can be lost.
And yes, can be healed by explicit smp_mb():
list_add_tail(&epi->rdlink, &ep->rdllist);
smp_mb();
if (waitqueue_active(&ep->wq))
wake_up(&ep->wp);
But let's make it simple, thus current patch replaces ep->wq.lock with
the ep->lock for wqueue modifications, thus wake up path always observes
activeness of the wqueue correcty.
Fixes:
a218cc491420 ("epoll: use rwlock in order to reduce ep_poll_callback() contention")
Reported-by: Max Neunhoeffer <max@arangodb.com>
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Max Neunhoeffer <max@arangodb.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Christopher Kohlhoff <chris.kohlhoff@clearpool.io>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Jes Sorensen <jes.sorensen@gmail.com>
Cc: <stable@vger.kernel.org> [5.1+]
Link: http://lkml.kernel.org/r/20200214170211.561524-1-rpenyaev@suse.de
References: https://bugzilla.kernel.org/show_bug.cgi?id=205933
Bisected-by: Max Neunhoeffer <max@arangodb.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Hocko [Sun, 22 Mar 2020 01:22:26 +0000 (18:22 -0700)]
mm: do not allow MADV_PAGEOUT for CoW pages
commit
12e967fd8e4e6c3d275b4c69c890adc838891300 upstream.
Jann has brought up a very interesting point [1]. While shared pages
are excluded from MADV_PAGEOUT normally, CoW pages can be easily
reclaimed that way. This can lead to all sorts of hard to debug
problems. E.g. performance problems outlined by Daniel [2].
There are runtime environments where there is a substantial memory
shared among security domains via CoW memory and a easy to reclaim way
of that memory, which MADV_{COLD,PAGEOUT} offers, can lead to either
performance degradation in for the parent process which might be more
privileged or even open side channel attacks.
The feasibility of the latter is not really clear to me TBH but there is
no real reason for exposure at this stage. It seems there is no real
use case to depend on reclaiming CoW memory via madvise at this stage so
it is much easier to simply disallow it and this is what this patch
does. Put it simply MADV_{PAGEOUT,COLD} can operate only on the
exclusively owned memory which is a straightforward semantic.
[1] http://lkml.kernel.org/r/CAG48ez0G3JkMq61gUmyQAaCq=_TwHbi1XKzWRooxZkv08PQKuw@mail.gmail.com
[2] http://lkml.kernel.org/r/CAKOZueua_v8jHCpmEtTB6f3i9e2YnmX4mqdYVWhV4E=Z-n+zRQ@mail.gmail.com
Fixes:
9c276cc65a58 ("mm: introduce MADV_COLD")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Daniel Colascione <dancol@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200312082248.GS23944@dhcp22.suse.cz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Baoquan He [Sun, 22 Mar 2020 01:22:13 +0000 (18:22 -0700)]
mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case
commit
d41e2f3bd54699f85b3d6f45abd09fa24a222cb9 upstream.
In section_deactivate(), pfn_to_page() doesn't work any more after
ms->section_mem_map is resetting to NULL in SPARSEMEM|!VMEMMAP case. It
causes a hot remove failure:
kernel BUG at mm/page_alloc.c:4806!
invalid opcode: 0000 [#1] SMP PTI
CPU: 3 PID: 8 Comm: kworker/u16:0 Tainted: G W 5.5.0-next-
20200205+ #340
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
RIP: 0010:free_pages+0x85/0xa0
Call Trace:
__remove_pages+0x99/0xc0
arch_remove_memory+0x23/0x4d
try_remove_memory+0xc8/0x130
__remove_memory+0xa/0x11
acpi_memory_device_remove+0x72/0x100
acpi_bus_trim+0x55/0x90
acpi_device_hotplug+0x2eb/0x3d0
acpi_hotplug_work_fn+0x1a/0x30
process_one_work+0x1a7/0x370
worker_thread+0x30/0x380
kthread+0x112/0x130
ret_from_fork+0x35/0x40
Let's move the ->section_mem_map resetting after
depopulate_section_memmap() to fix it.
[akpm@linux-foundation.org: remove unneeded initialization, per David]
Fixes:
ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug")
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200307084229.28251-2-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Down [Sun, 22 Mar 2020 01:22:23 +0000 (18:22 -0700)]
mm, memcg: throttle allocators based on ancestral memory.high
commit
e26733e0d0ec6798eca93daa300bc3f43616127f upstream.
Prior to this commit, we only directly check the affected cgroup's
memory.high against its usage. However, it's possible that we are being
reclaimed as a result of hitting an ancestor memory.high and should be
penalised based on that, instead.
This patch changes memory.high overage throttling to use the largest
overage in its ancestors when considering how many penalty jiffies to
charge. This makes sure that we penalise poorly behaving cgroups in the
same way regardless of at what level of the hierarchy memory.high was
breached.
Fixes:
0e4b01df8659 ("mm, memcg: throttle allocators when failing reclaim over memory.high")
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org> [5.4.x+]
Link: http://lkml.kernel.org/r/8cd132f84bd7e16cdb8fde3378cdbf05ba00d387.1584036142.git.chris@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Down [Sun, 22 Mar 2020 01:22:20 +0000 (18:22 -0700)]
mm, memcg: fix corruption on 64-bit divisor in memory.high throttling
commit
d397a45fc741c80c32a14e2de008441e9976f50c upstream.
Commit
0e4b01df8659 had a bunch of fixups to use the right division
method. However, it seems that after all that it still wasn't right --
div_u64 takes a 32-bit divisor.
The headroom is still large (2^32 pages), so on mundane systems you
won't hit this, but this should definitely be fixed.
Fixes:
0e4b01df8659 ("mm, memcg: throttle allocators when failing reclaim over memory.high")
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: <stable@vger.kernel.org> [5.4.x+]
Link: http://lkml.kernel.org/r/80780887060514967d414b3cd91f9a316a16ab98.1584036142.git.chris@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chunguang Xu [Sun, 22 Mar 2020 01:22:10 +0000 (18:22 -0700)]
memcg: fix NULL pointer dereference in __mem_cgroup_usage_unregister_event
commit
7d36665a5886c27ca4c4d0afd3ecc50b400f3587 upstream.
An eventfd monitors multiple memory thresholds of the cgroup, closes them,
the kernel deletes all events related to this eventfd. Before all events
are deleted, another eventfd monitors the memory threshold of this cgroup,
leading to a crash:
BUG: kernel NULL pointer dereference, address:
0000000000000004
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD
800000033058e067 P4D
800000033058e067 PUD
3355ce067 PMD 0
Oops: 0002 [#1] SMP PTI
CPU: 2 PID: 14012 Comm: kworker/2:6 Kdump: loaded Not tainted 5.6.0-rc4 #3
Hardware name: LENOVO 20AWS01K00/20AWS01K00, BIOS GLET70WW (2.24 ) 05/21/2014
Workqueue: events memcg_event_remove
RIP: 0010:__mem_cgroup_usage_unregister_event+0xb3/0x190
RSP: 0018:
ffffb47e01c4fe18 EFLAGS:
00010202
RAX:
0000000000000001 RBX:
ffff8bb223a8a000 RCX:
0000000000000001
RDX:
0000000000000001 RSI:
ffff8bb22fb83540 RDI:
0000000000000001
RBP:
ffffb47e01c4fe48 R08:
0000000000000000 R09:
0000000000000010
R10:
000000000000000c R11:
071c71c71c71c71c R12:
ffff8bb226aba880
R13:
ffff8bb223a8a480 R14:
0000000000000000 R15:
0000000000000000
FS:
0000000000000000(0000) GS:
ffff8bb242680000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000004 CR3:
000000032c29c003 CR4:
00000000001606e0
Call Trace:
memcg_event_remove+0x32/0x90
process_one_work+0x172/0x380
worker_thread+0x49/0x3f0
kthread+0xf8/0x130
ret_from_fork+0x35/0x40
CR2:
0000000000000004
We can reproduce this problem in the following ways:
1. We create a new cgroup subdirectory and a new eventfd, and then we
monitor multiple memory thresholds of the cgroup through this eventfd.
2. closing this eventfd, and __mem_cgroup_usage_unregister_event ()
will be called multiple times to delete all events related to this
eventfd.
The first time __mem_cgroup_usage_unregister_event() is called, the
kernel will clear all items related to this eventfd in thresholds->
primary.
Since there is currently only one eventfd, thresholds-> primary becomes
empty, so the kernel will set thresholds-> primary and hresholds-> spare
to NULL. If at this time, the user creates a new eventfd and monitor
the memory threshold of this cgroup, kernel will re-initialize
thresholds-> primary.
Then when __mem_cgroup_usage_unregister_event () is called for the
second time, because thresholds-> primary is not empty, the system will
access thresholds-> spare, but thresholds-> spare is NULL, which will
trigger a crash.
In general, the longer it takes to delete all events related to this
eventfd, the easier it is to trigger this problem.
The solution is to check whether the thresholds associated with the
eventfd has been cleared when deleting the event. If so, we do nothing.
[akpm@linux-foundation.org: fix comment, per Kirill]
Fixes:
907860ed381a ("cgroups: make cftype.unregister_event() void-returning")
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/077a6f67-aefa-4591-efec-f2f3af2b0b02@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Tue, 17 Mar 2020 06:22:11 +0000 (08:22 +0200)]
stm class: sys-t: Fix the use of time_after()
commit
283f87c0d5d32b4a5c22636adc559bca82196ed3 upstream.
The operands of time_after() are in a wrong order in both instances in
the sys-t driver. Fix that.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes:
39f10239df75 ("stm class: p_sys-t: Add support for CLOCKSYNC packets")
Fixes:
d69d5e83110f ("stm class: Add MIPI SyS-T protocol support")
Cc: stable@vger.kernel.org # v4.20+
Link: https://lore.kernel.org/r/20200317062215.15598-3-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qiujun Huang [Wed, 18 Mar 2020 07:53:50 +0000 (15:53 +0800)]
drm/lease: fix WARNING in idr_destroy
commit
b216a8e7908cd750550c0480cf7d2b3a37f06954 upstream.
drm_lease_create takes ownership of leases. And leases will be released
by drm_master_put.
drm_master_put
->drm_master_destroy
->idr_destroy
So we needn't call idr_destroy again.
Reported-and-tested-by: syzbot+05835159fe322770fe3d@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1584518030-4173-1-git-send-email-hqjagain@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tom St Denis [Tue, 10 Mar 2020 12:40:41 +0000 (08:40 -0400)]
drm/amd/amdgpu: Fix GPR read from debugfs (v2)
commit
5bbc6604a62814511c32f2e39bc9ffb2c1b92cbe upstream.
The offset into the array was specified in bytes but should
be in terms of 32-bit words. Also prevent large reads that
would also cause a buffer overread.
v2: Read from correct offset from internal storage buffer.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Tue, 10 Mar 2020 12:13:53 +0000 (12:13 +0000)]
btrfs: fix log context list corruption after rename whiteout error
commit
236ebc20d9afc5e9ff52f3cf3f365a91583aac10 upstream.
During a rename whiteout, if btrfs_whiteout_for_rename() returns an error
we can end up returning from btrfs_rename() with the log context object
still in the root's log context list - this happens if 'sync_log' was
set to true before we called btrfs_whiteout_for_rename() and it is
dangerous because we end up with a corrupt linked list (root->log_ctxs)
as the log context object was allocated on the stack.
After btrfs_rename() returns, any task that is running btrfs_sync_log()
concurrently can end up crashing because that linked list is traversed by
btrfs_sync_log() (through btrfs_remove_all_log_ctxs()). That results in
the same issue that commit
e6c617102c7e4 ("Btrfs: fix log context list
corruption after rename exchange operation") fixed.
Fixes:
d4682ba03ef618 ("Btrfs: sync log after logging new name")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (VMware) [Fri, 6 Mar 2020 15:08:57 +0000 (17:08 +0200)]
xhci: Do not open code __print_symbolic() in xhci trace events
commit
045706bff837ee89c13f1ace173db71922c1c40b upstream.
libtraceevent (used by perf and trace-cmd) failed to parse the
xhci_urb_dequeue trace event. This is because the user space trace
event format parsing is not a full C compiler. It can handle some basic
logic, but is not meant to be able to handle everything C can do.
In cases where a trace event field needs to be converted from a number
to a string, there's the __print_symbolic() macro that should be used:
See samples/trace_events/trace-events-sample.h
Some xhci trace events open coded the __print_symbolic() causing the
user spaces tools to fail to parse it. This has to be replaced with
__print_symbolic() instead.
CC: stable@vger.kernel.org
Reported-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206531
Fixes:
5abdc2e6e12ff ("usb: host: xhci: add urb_enqueue/dequeue/giveback tracers")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200306150858.21904-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vincenzo Frascino [Thu, 19 Mar 2020 14:11:38 +0000 (14:11 +0000)]
arm64: compat: Fix syscall number of compat_clock_getres
commit
3568b88944fef28db3ee989b957da49ffc627ede upstream.
The syscall number of compat_clock_getres was erroneously set to 247
(__NR_io_cancel!) instead of 264. This causes the vDSO fallback of
clock_getres() to land on the wrong syscall for compat tasks.
Fix the numbering.
Cc: <stable@vger.kernel.org>
Fixes:
53c489e1dfeb6 ("arm64: compat: Add missing syscall numbers")
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Corentin Labbe [Wed, 18 Mar 2020 15:26:49 +0000 (15:26 +0000)]
rtc: max8907: add missing select REGMAP_IRQ
commit
5d892919fdd0cefd361697472d4e1b174a594991 upstream.
I have hit the following build error:
armv7a-hardfloat-linux-gnueabi-ld: drivers/rtc/rtc-max8907.o: in function `max8907_rtc_probe':
rtc-max8907.c:(.text+0x400): undefined reference to `regmap_irq_get_virq'
max8907 should select REGMAP_IRQ
Fixes:
94c01ab6d7544 ("rtc: add MAX8907 RTC driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jessica Yu [Wed, 11 Mar 2020 17:01:20 +0000 (18:01 +0100)]
modpost: move the namespace field in Module.symvers last
commit
5190044c2965514a973184ca68ef5fad57a24670 upstream.
In order to preserve backwards compatability with kmod tools, we have to
move the namespace field in Module.symvers last, as the depmod -e -E
option looks at the first three fields in Module.symvers to check symbol
versions (and it's expected they stay in the original order of crc,
symbol, module).
In addition, update an ancient comment above read_dump() in modpost that
suggested that the export type field in Module.symvers was optional. I
suspect that there were historical reasons behind that comment that are
no longer accurate. We have been unconditionally printing the export
type since 2.6.18 (commit
bd5cbcedf44), which is over a decade ago now.
Fix up read_dump() to treat each field as non-optional. I suspect the
original read_dump() code treated the export field as optional in order
to support pre <= 2.6.18 Module.symvers (which did not have the export
type field). Note that although symbol namespaces are optional, the
field will not be omitted from Module.symvers if a symbol does not have
a namespace. In this case, the field will simply be empty and the next
delimiter or end of line will follow.
Cc: stable@vger.kernel.org
Fixes:
cb9b55d21fe0 ("modpost: add support for symbol namespaces")
Tested-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Tue, 17 Mar 2020 06:22:15 +0000 (08:22 +0200)]
intel_th: pci: Add Elkhart Lake CPU support
commit
add492d2e9446a77ede9bb43699ec85ca8fc1aba upstream.
This adds support for the Trace Hub in Elkhart Lake CPU.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200317062215.15598-7-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Tue, 17 Mar 2020 06:22:14 +0000 (08:22 +0200)]
intel_th: Fix user-visible error codes
commit
ce666be89a8a09c5924ff08fc32e119f974bdab6 upstream.
There are a few places in the driver that end up returning ENOTSUPP to
the user, replace those with EINVAL.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes:
ba82664c134ef ("intel_th: Add Memory Storage Unit driver")
Cc: stable@vger.kernel.org # v4.4+
Link: https://lore.kernel.org/r/20200317062215.15598-6-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Tue, 17 Mar 2020 06:22:13 +0000 (08:22 +0200)]
intel_th: msu: Fix the unexpected state warning
commit
885f123554bbdc1807ca25a374be6e9b3bddf4de upstream.
The unexpected state warning should only warn on illegal state
transitions. Fix that.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes:
615c164da0eb4 ("intel_th: msu: Introduce buffer interface")
Cc: stable@vger.kernel.org # v5.4+
Link: https://lore.kernel.org/r/20200317062215.15598-5-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Samuel Thibault [Fri, 6 Mar 2020 00:30:47 +0000 (01:30 +0100)]
staging/speakup: fix get_word non-space look-ahead
commit
9d32c0cde4e2d1343dfb88a67b2ec6397705b32b upstream.
get_char was erroneously given the address of the pointer to the text
instead of the address of the text, thus leading to random crashes when
the user requests speaking a word while the current position is on a space
character and say_word_ctl is not enabled.
Reported-on: https://github.com/bytefire/speakup/issues/1
Reported-by: Kirk Reiser <kirk@reisers.ca>
Reported-by: Janina Sajka <janina@rednote.net>
Reported-by: Alexandr Epaneshnikov <aarnaarn2@gmail.com>
Reported-by: Gregory Nowak <greg@gregn.net>
Reported-by: deedra waters <deedra@the-brannons.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Alexandr Epaneshnikov <aarnaarn2@gmail.com>
Tested-by: Gregory Nowak <greg@gregn.net>
Tested-by: Michael Taboada <michael@michaels.world>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200306003047.thijtmqrnayd3dmw@function
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Thu, 12 Mar 2020 11:01:49 +0000 (12:01 +0100)]
staging: greybus: loopback_test: fix poll-mask build breakage
commit
8f3675be4bda33adbdc1dd2ab3b6c76a7599a79e upstream.
A scripted conversion from userland POLL* to kernel EPOLL* constants
mistakingly replaced the poll flags in the loopback_test tool, which
therefore no longer builds.
Fixes:
a9a08845e9ac ("vfs: do bulk POLL* -> EPOLL* replacement")
Cc: stable <stable@vger.kernel.org> # 4.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200312110151.22028-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Thu, 12 Mar 2020 09:36:52 +0000 (10:36 +0100)]
staging: rtl8188eu: Add device id for MERCUSYS MW150US v2
commit
bb5786b9286c253557a0115bc8d21879e61b7b94 upstream.
This device was added to the stand-alone driver on github.
Add it to the staging driver as well.
Link: https://github.com/lwfinger/rtl8188eu/commit/2141f244c3e7
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200312093652.13918-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Wed, 11 Mar 2020 19:41:21 +0000 (12:41 -0700)]
kbuild: Disable -Wpointer-to-enum-cast
commit
82f2bc2fcc0160d6f82dd1ac64518ae0a4dd183f upstream.
Clang's -Wpointer-to-int-cast deviates from GCC in that it warns when
casting to enums. The kernel does this in certain places, such as device
tree matches to set the version of the device being used, which allows
the kernel to avoid using a gigantic union.
https://elixir.bootlin.com/linux/v5.5.8/source/drivers/ata/ahci_brcm.c#L428
https://elixir.bootlin.com/linux/v5.5.8/source/drivers/ata/ahci_brcm.c#L402
https://elixir.bootlin.com/linux/v5.5.8/source/include/linux/mod_devicetable.h#L264
To avoid a ton of false positive warnings, disable this particular part
of the warning, which has been split off into a separate diagnostic so
that the entire warning does not need to be turned off for clang. It
will be visible under W=1 in case people want to go about fixing these
easily and enabling the warning treewide.
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/887
Link: https://github.com/llvm/llvm-project/commit/2a41b31fcdfcb67ab7038fc2ffb606fd50b83a84
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Murphy Zhou [Sat, 14 Mar 2020 03:38:31 +0000 (11:38 +0800)]
CIFS: fiemap: do not return EINVAL if get nothing
commit
979a2665eb6c603ddce0ab374041ab101827b2e7 upstream.
If we call fiemap on a truncated file with none blocks allocated,
it makes sense we get nothing from this call. No output means
no blocks have been counted, but the call succeeded. It's a valid
response.
Simple example reproducer:
xfs_io -f 'truncate 2M' -c 'fiemap -v' /cifssch/testfile
xfs_io: ioctl(FS_IOC_FIEMAP) ["/cifssch/testfile"]: Invalid argument
Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Thu, 12 Mar 2020 10:42:57 +0000 (19:42 +0900)]
mmc: sdhci-cadence: set SDHCI_QUIRK2_PRESET_VALUE_BROKEN for UniPhier
commit
18b587b45c13bb6a07ed0edac15f06892593d07a upstream.
The SDHCI_PRESET_FOR_* registers are not set for the UniPhier platform
integration. (They are all read as zeros).
Set the SDHCI_QUIRK2_PRESET_VALUE_BROKEN quirk flag. Otherwise, the
High Speed DDR mode on the eMMC controller (MMC_TIMING_MMC_DDR52)
would not work.
I split the platform data to give no impact to other platforms,
although the UniPhier platform is currently only the upstream user
of this IP.
The SDHCI_QUIRK2_PRESET_VALUE_BROKEN flag is set if the compatible
string matches to "socionext,uniphier-sd4hc".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200312104257.21017-1-yamada.masahiro@socionext.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michał Mirosław [Sun, 15 Mar 2020 16:44:25 +0000 (17:44 +0100)]
mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2
commit
53dd0a7cd65edc83b0c243d1c08377c8b876b2ee upstream.
SAMA5D2x doesn't drive CMD line if GPIO is used as CD line (at least
SAMA5D27 doesn't). Fix this by forcing card-detect in the module
if module-controlled CD is not used.
Fixed commit addresses the problem only for non-removable cards. This
amends it to also cover gpio-cd case.
Cc: stable@vger.kernel.org
Fixes:
7a1e3f143176 ("mmc: sdhci-of-at91: force card detect value for non removable devices")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/8d10950d9940468577daef4772b82a071b204716.1584290561.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ricky Wu [Mon, 16 Mar 2020 02:52:32 +0000 (10:52 +0800)]
mmc: rtsx_pci: Fix support for speed-modes that relies on tuning
commit
4686392c32361c97e8434adf9cc77ad7991bfa81 upstream.
The TX/RX register should not be treated the same way to allow for better
support of tuning. Fix this by using a default initial value for TX.
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200316025232.1167-1-ricky_wu@realtek.com
[Ulf: Updated changelog]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomas Novotny [Tue, 18 Feb 2020 15:44:51 +0000 (16:44 +0100)]
iio: light: vcnl4000: update sampling periods for vcnl4040
commit
2ca5a8792d617b4035aacd0a8be527f667fbf912 upstream.
Vishay has published a new version of "Designing the VCNL4200 Into an
Application" application note in October 2019. The new version specifies
that there is +-20% of part to part tolerance. Although the application
note is related to vcnl4200, according to support the vcnl4040's "ASIC
is quite similar to that one for the VCNL4200".
So update the sampling periods (and comment), including the correct
sampling period for proximity. Both sampling periods are lower. Users
relying on the blocking behaviour of reading will get proximity
measurements much earlier.
Fixes:
5a441aade5b3 ("iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor")
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Tomas Novotny <tomas@novotny.cz>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomas Novotny [Tue, 18 Feb 2020 15:44:50 +0000 (16:44 +0100)]
iio: light: vcnl4000: update sampling periods for vcnl4200
commit
b42aa97ed5f1169cfd37175ef388ea62ff2dcf43 upstream.
Vishay has published a new version of "Designing the VCNL4200 Into an
Application" application note in October 2019. The new version specifies
that there is +-20% of part to part tolerance. This explains the drift
seen during experiments. The proximity pulse width is also changed from
32us to 30us. According to the support, the tolerance also applies to
ambient light.
So update the sampling periods. As the reading is blocking, current
users may notice slightly longer response time.
Fixes:
be38866fbb97 ("iio: vcnl4000: add support for VCNL4200")
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Tomas Novotny <tomas@novotny.cz>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eugen Hristev [Tue, 28 Jan 2020 12:57:39 +0000 (12:57 +0000)]
iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode
commit
a500f3bd787f8224341e44b238f318c407b10897 upstream.
The differential channels require writing the channel offset register (COR).
Otherwise they do not work in differential mode.
The configuration of COR is missing in triggered mode.
Fixes:
5e1a1da0f8c9 ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Olivier Moysan [Tue, 21 Jan 2020 11:02:56 +0000 (12:02 +0100)]
iio: adc: stm32-dfsdm: fix sleep in atomic context
commit
e19ac9d9a978f8238a85a28ed624094a497d5ae6 upstream.
This commit fixes the error message:
"BUG: sleeping function called from invalid context at kernel/irq/chip.c"
Suppress the trigger irq handler. Make the buffer transfers directly
in DMA callback, instead.
Push buffers without timestamps, as timestamps are not supported
in DFSDM driver.
Fixes:
11646e81d775 ("iio: adc: stm32-dfsdm: add support for buffer modes")
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephan Gerhold [Fri, 14 Feb 2020 11:03:24 +0000 (12:03 +0100)]
iio: magnetometer: ak8974: Fix negative raw values in sysfs
commit
b500c086e4110829a308c23e83a7cdc65b26228a upstream.
At the moment, reading from in_magn_*_raw in sysfs tends to return
large values around 65000, even though the output of ak8974 is actually
limited to ±32768. This happens because the value is never converted
to the signed 16-bit integer variant.
Add an explicit cast to s16 to fix this.
Fixes:
7c94a8b2ee8c ("iio: magn: add a driver for AK8974")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Waleij <linus.walleij@linaro.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexandru Tachici [Wed, 19 Feb 2020 14:31:12 +0000 (16:31 +0200)]
iio: accel: adxl372: Set iio_chan BE
commit
cb2116ff97859d34fda6cb561ac654415f4c6230 upstream.
Data stored in the iio-buffer is BE and this
should be specified in the iio_chan_spec struct.
Fixes:
f4f55ce38e5f8 ("iio:adxl372: Add FIFO and interrupts support")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabrice Gasnier [Fri, 14 Feb 2020 16:46:35 +0000 (17:46 +0100)]
iio: trigger: stm32-timer: disable master mode when stopping
commit
29e8c8253d7d5265f58122c0a7902e26df6c6f61 upstream.
Master mode should be disabled when stopping. This mainly impacts
possible other use-case after timer has been stopped. Currently,
master mode remains set (from start routine).
Fixes:
6fb34812c2a2 ("iio: stm32 trigger: Add support for TRGO2 triggers")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wen-chien Jesse Sung [Mon, 24 Feb 2020 09:54:26 +0000 (17:54 +0800)]
iio: st_sensors: remap SMO8840 to LIS2DH12
commit
e43d110cdc206b6df4dd438cd10c81d1da910aad upstream.
According to ST, the HID is for LIS2DH12.
Fixes:
3d56e19815b3 ("iio: accel: st_accel: Add support for the SMO8840 ACPI id")
Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Petr Štetiar [Thu, 27 Feb 2020 16:27:34 +0000 (17:27 +0100)]
iio: chemical: sps30: fix missing triggered buffer dependency
commit
016a8845f6da65b2203f102f192046fbb624e250 upstream.
SPS30 uses triggered buffer, but the dependency is not specified in the
Kconfig file. Fix this by selecting IIO_BUFFER and IIO_TRIGGERED_BUFFER
config symbols.
Cc: stable@vger.kernel.org
Fixes:
232e0f6ddeae ("iio: chemical: add support for Sensirion SPS30 sensor")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Mon, 24 Feb 2020 18:20:44 +0000 (10:20 -0800)]
tty: fix compat TIOCGSERIAL checking wrong function ptr
commit
6e622cd8bd888c7fa3ee2b7dfb3514ab53b21570 upstream.
Commit
77654350306a ("take compat TIOC[SG]SERIAL treatment into
tty_compat_ioctl()") changed the compat version of TIOCGSERIAL to start
checking for the presence of the ->set_serial function pointer rather
than ->get_serial. This appears to be a copy-and-paste error, since
->get_serial is the function pointer that is called as well as the
pointer that is checked by the non-compat version of TIOCGSERIAL.
Fix this by checking the correct function pointer.
Fixes:
77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()")
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20200224182044.234553-3-ebiggers@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Mon, 24 Feb 2020 18:20:43 +0000 (10:20 -0800)]
tty: fix compat TIOCGSERIAL leaking uninitialized memory
commit
17329563a97df3ba474eca5037c1336e46e14ff8 upstream.
Commit
77654350306a ("take compat TIOC[SG]SERIAL treatment into
tty_compat_ioctl()") changed the compat version of TIOCGSERIAL to start
copying a whole 'serial_struct32' to userspace rather than individual
fields, but failed to initialize all padding and fields -- namely the
hole after the 'iomem_reg_shift' field, and the 'reserved' field.
Fix this by initializing the struct to zero.
[v2: use sizeof, and convert the adjacent line for consistency.]
Reported-by: syzbot+8da9175e28eadcb203ce@syzkaller.appspotmail.com
Fixes:
77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()")
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20200224182044.234553-2-ebiggers@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Thu, 12 Mar 2020 15:57:30 +0000 (16:57 +0100)]
ALSA: pcm: oss: Remove WARNING from snd_pcm_plug_alloc() checks
commit
5461e0530c222129dfc941058be114b5cbc00837 upstream.
The return value checks in snd_pcm_plug_alloc() are covered with
snd_BUG_ON() macro that may trigger a kernel WARNING depending on the
kconfig. But since the error condition can be triggered by a weird
user space parameter passed to OSS layer, we shouldn't give the kernel
stack trace just for that. As it's a normal error condition, let's
remove snd_BUG_ON() macro usage there.
Reported-by: syzbot+2a59ee7a9831b264f45e@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200312155730.7520-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Mon, 9 Mar 2020 08:21:48 +0000 (09:21 +0100)]
ALSA: pcm: oss: Avoid plugin buffer overflow
commit
f2ecf903ef06eb1bbbfa969db9889643d487e73a upstream.
Each OSS PCM plugins allocate its internal buffer per pre-calculation
of the max buffer size through the chain of plugins (calling
src_frames and dst_frames callbacks). This works for most plugins,
but the rate plugin might behave incorrectly. The calculation in the
rate plugin involves with the fractional position, i.e. it may vary
depending on the input position. Since the buffer size
pre-calculation is always done with the offset zero, it may return a
shorter size than it might be; this may result in the out-of-bound
access as spotted by fuzzer.
This patch addresses those possible buffer overflow accesses by simply
setting the upper limit per the given buffer size for each plugin
before src_frames() and after dst_frames() calls.
Reported-by: syzbot+e1fe9f44fb8ecf4fb5dd@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/000000000000b25ea005a02bcf21@google.com
Link: https://lore.kernel.org/r/20200309082148.19855-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Mon, 16 Mar 2020 09:05:06 +0000 (10:05 +0100)]
ALSA: seq: oss: Fix running status after receiving sysex
commit
6c3171ef76a0bad892050f6959a7eac02fb16df7 upstream.
This is a similar bug like the previous case for virmidi: the invalid
running status is kept after receiving a sysex message.
Again the fix is to clear the running status after handling the sysex.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3b4a4e0f232b7afbaf0a843f63d0e538e3029bfd.camel@domdv.de
Link: https://lore.kernel.org/r/20200316090506.23966-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Mon, 16 Mar 2020 09:05:05 +0000 (10:05 +0100)]
ALSA: seq: virmidi: Fix running status after receiving sysex
commit
4384f167ce5fa7241b61bb0984d651bc528ddebe upstream.
The virmidi driver handles sysex event exceptionally in a short-cut
snd_seq_dump_var_event() call, but this missed the reset of the
running status. As a result, it may lead to an incomplete command
right after the sysex when an event with the same running status was
queued.
Fix it by clearing the running status properly via alling
snd_midi_event_reset_decode() for that code path.
Reported-by: Andreas Steinmetz <ast@domdv.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3b4a4e0f232b7afbaf0a843f63d0e538e3029bfd.camel@domdv.de
Link: https://lore.kernel.org/r/20200316090506.23966-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jian-Hong Pan [Tue, 17 Mar 2020 08:28:09 +0000 (16:28 +0800)]
ALSA: hda/realtek - Enable the headset of Acer N50-600 with ALC662
commit
a124458a127ccd7629e20cd7bae3e1f758ed32aa upstream.
A headset on the desktop like Acer N50-600 does not work, until quirk
ALC662_FIXUP_ACER_NITRO_HEADSET_MODE is applied.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200317082806.73194-3-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jian-Hong Pan [Tue, 17 Mar 2020 08:28:07 +0000 (16:28 +0800)]
ALSA: hda/realtek - Enable headset mic of Acer X2660G with ALC662
commit
d858c706bdca97698752bd26b60c21ec07ef04f2 upstream.
The Acer desktop X2660G with ALC662 can't detect the headset microphone
until ALC662_FIXUP_ACER_X2660G_HEADSET_MODE quirk applied.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200317082806.73194-2-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Mon, 9 Mar 2020 09:59:22 +0000 (10:59 +0100)]
ALSA: line6: Fix endless MIDI read loop
commit
d683469b3c93d7e2afd39e6e1970f24700eb7a68 upstream.
The MIDI input event parser of the LINE6 driver may enter into an
endless loop when the unexpected data sequence is given, as it tries
to continue the secondary bytes without termination. Also, when the
input data is too short, the parser returns a negative error, while
the caller doesn't handle it properly. This would lead to the
unexpected behavior as well.
This patch addresses those issues by checking the return value
correctly and handling the one-byte event in the parser properly.
The bug was reported by syzkaller.
Reported-by: syzbot+cce32521ee0a824c21f7@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/000000000000033087059f8f8fa3@google.com
Link: https://lore.kernel.org/r/20200309095922.30269-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anthony Mallet [Thu, 12 Mar 2020 13:31:01 +0000 (14:31 +0100)]
USB: cdc-acm: fix rounding error in TIOCSSERIAL
commit
b401f8c4f492cbf74f3f59c9141e5be3071071bb upstream.
By default, tty_port_init() initializes those parameters to a multiple
of HZ. For instance in line 69 of tty_port.c:
port->close_delay = (50 * HZ) / 100;
https://github.com/torvalds/linux/blob/master/drivers/tty/tty_port.c#L69
With e.g. CONFIG_HZ = 250 (as this is the case for Ubuntu 18.04
linux-image-4.15.0-37-generic), the default setting for close_delay is
thus 125.
When ioctl(fd, TIOCGSERIAL, &s) is executed, the setting returned in
user space is '12' (125/10). When ioctl(fd, TIOCSSERIAL, &s) is then
executed with the same setting '12', the value is interpreted as '120'
which is different from the current setting and a EPERM error may be
raised by set_serial_info() if !CAP_SYS_ADMIN.
https://github.com/torvalds/linux/blob/master/drivers/usb/class/cdc-acm.c#L919
Fixes:
ba2d8ce9db0a6 ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)")
Signed-off-by: Anthony Mallet <anthony.mallet@laas.fr>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200312133101.7096-2-anthony.mallet@laas.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anthony Mallet [Thu, 12 Mar 2020 13:31:00 +0000 (14:31 +0100)]
USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL
commit
633e2b2ded739a34bd0fb1d8b5b871f7e489ea29 upstream.
close_delay and closing_wait are specified in hundredth of a second but stored
internally in jiffies. Use the jiffies_to_msecs() and msecs_to_jiffies()
functions to convert from each other.
Signed-off-by: Anthony Mallet <anthony.mallet@laas.fr>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200312133101.7096-1-anthony.mallet@laas.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heikki Krogerus [Wed, 11 Mar 2020 13:00:06 +0000 (16:00 +0300)]
usb: typec: ucsi: displayport: Fix a potential race during registration
commit
081da1325d351ea8804cf74e65263ea120834f33 upstream.
Locking the connector in ucsi_register_displayport() to make
sure that nothing can access the displayport alternate mode
before the function has finished and the alternate mode is
actually ready.
Fixes:
af8622f6a585 ("usb: typec: ucsi: Support for DisplayPort alt mode")
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200311130006.41288-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heikki Krogerus [Wed, 11 Mar 2020 13:00:05 +0000 (16:00 +0300)]
usb: typec: ucsi: displayport: Fix NULL pointer dereference
commit
d16e7b62c5adcd13832c6b0ba364c3468d21b856 upstream.
If the registration of the DisplayPort was not successful,
or if the port does not support DisplayPort alt mode in the
first place, the function ucsi_displayport_remove_partner()
will fail with NULL pointer dereference when it attempts to
access the driver data.
Adding a check to the function to make sure there really is
driver data for the device before modifying it.
Fixes:
af8622f6a585 ("usb: typec: ucsi: Support for DisplayPort alt mode")
Reported-by: Andrea Gagliardi La Gala <andrea.lagala@gmail.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206365
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200311130006.41288-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alberto Mattea [Fri, 6 Mar 2020 15:08:58 +0000 (17:08 +0200)]
usb: xhci: apply XHCI_SUSPEND_DELAY to AMD XHCI controller 1022:145c
commit
16263abc12d09871156a1c8650fb651f0e552f5e upstream.
This controller timeouts during suspend (S3) with
[ 240.521724] xhci_hcd 0000:30:00.3: WARN: xHC save state timeout
[ 240.521729] xhci_hcd 0000:30:00.3: ERROR mismatched command completion event
thus preventing the system from entering S3.
Moreover it remains in an undefined state where some connected devices stop
working until a reboot.
Apply the XHCI_SUSPEND_DELAY quirk to make it suspend properly.
CC: stable@vger.kernel.org
Signed-off-by: Alberto Mattea <alberto@mattea.info>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200306150858.21904-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Scott Chen [Wed, 11 Mar 2020 06:14:23 +0000 (14:14 +0800)]
USB: serial: pl2303: add device-id for HP LD381
commit
cecc113c1af0dd41ccf265c1fdb84dbd05e63423 upstream.
Add a device id for HP LD381 Display
LD381: 03f0:0f7f
Signed-off-by: Scott Chen <scott@labau.com.tw>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ran Wang [Fri, 6 Mar 2020 09:23:28 +0000 (17:23 +0800)]
usb: host: xhci-plat: add a shutdown
commit
b433e340e7565110b0ce9ca4b3e26f4b97a1decf upstream.
When loading new kernel via kexec, we need to shutdown host controller to
avoid any un-expected memory accessing during new kernel boot.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Cc: stable <stable@vger.kernel.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20200306092328.41253-1-ran.wang_1@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniele Palmas [Wed, 4 Mar 2020 10:43:10 +0000 (11:43 +0100)]
USB: serial: option: add ME910G1 ECM composition 0x110b
commit
8e852a7953be2a6ee371449f7257fe15ace6a1fc upstream.
Add ME910G1 ECM composition 0x110b: tty, tty, tty, ecm
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20200304104310.2938-1-dnlplm@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Fri, 13 Mar 2020 12:07:08 +0000 (13:07 +0100)]
usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters
commit
75d7676ead19b1fbb5e0ee934c9ccddcb666b68c upstream.
We have been receiving bug reports that ethernet connections over
RTL8153 based ethernet adapters stops working after a while with
errors like these showing up in dmesg when the ethernet stops working:
[12696.189484] r8152 6-1:1.0 enp10s0u1: Tx timeout
[12702.333456] r8152 6-1:1.0 enp10s0u1: Tx timeout
[12707.965422] r8152 6-1:1.0 enp10s0u1: Tx timeout
This has been reported on Dell WD15 docks, Belkin USB-C Express Dock 3.1
docks and with generic USB to ethernet dongles using the RTL8153
chipsets. Some users have tried adding usbcore.quirks=0bda:8153:k to
the kernel commandline and all users who have tried this report that
this fixes this.
Also note that we already have an existing NO_LPM quirk for the RTL8153
used in the Microsoft Surface Dock (where it uses a different usb-id).
This commit adds a NO_LPM quirk for the generic Realtek RTL8153
0bda:8153 usb-id, fixing the Tx timeout errors on these devices.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198931
Cc: stable@vger.kernel.org
Cc: russianneuromancer@ya.ru
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200313120708.100339-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kai-Heng Feng [Wed, 5 Feb 2020 11:26:33 +0000 (19:26 +0800)]
USB: Disable LPM on WD19's Realtek Hub
commit
b63e48fb50e1ca71db301ca9082befa6f16c55c4 upstream.
Realtek Hub (0bda:0x0487) used in Dell Dock WD19 sometimes drops off the
bus when bringing underlying ports from U3 to U0.
Disabling LPM on the hub during setting link state is not enough, so
let's disable LPM completely for this hub.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200205112633.25995-3-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sasha Levin [Sun, 22 Mar 2020 14:37:16 +0000 (10:37 -0400)]
Revert "drm/fbdev: Fallback to non tiled mode if all tiles not present"
[ Upstream commit
f053c83ad5c88427644e06746bfddcefa409c27d ]
This reverts commit
f25c7a006cd1 ("drm/fbdev: Fallback to non tiled mode
if all tiles not present"). The commit causes flip done timeouts in CI.
Below are the sample errors thrown in logs:
[IGT] core_getversion: executing
[IGT] core_getversion: exiting, ret=0
Setting dangerous option reset - tainting kernel
drm:drm_atomic_helper_wait_for_dependencies] ERROR [CRTC:152:pipe B] flip_done timed out
drm:drm_atomic_helper_wait_for_dependencies] ERROR [CONNECTOR:299:DP-2] flip_done timed out
drm:drm_atomic_helper_wait_for_dependencies] ERROR [PLANE:92:plane 1B] flip_done timed out
[drm:drm_atomic_helper_wait_for_flip_done] ERROR [CRTC:152:pipe B] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] ERROR [CRTC:152:pipe B] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] ERROR [CONNECTOR:299:DP-2] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] ERROR [PLANE:92:plane 1B] flip_done timed out
[drm:drm_atomic_helper_wait_for_flip_done] ERROR [CRTC:152:pipe B] flip_done timed out
Console: switching to colour frame buffer device 480x135
[drm:drm_atomic_helper_wait_for_dependencies] ERROR [CRTC:152:pipe B] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] ERROR [CONNECTOR:299:DP-2] flip_done timed out
Reverting the change for now to unblock CI execution.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Fixes:
f25c7a006cd1 ("drm/fbdev: Fallback to non tiled mode if all tiles not present")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/6
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191123091840.32382-1-uma.shankar@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christian Brauner [Wed, 11 Mar 2020 10:53:09 +0000 (11:53 +0100)]
binderfs: use refcount for binder control devices too
[ Upstream commit
211b64e4b5b6bd5fdc19cd525c2cc9a90e6b0ec9 ]
Binderfs binder-control devices are cleaned up via binderfs_evict_inode
too() which will use refcount_dec_and_test(). However, we missed to set
the refcount for binderfs binder-control devices and so we underflowed
when the binderfs instance got unmounted. Pretty obvious oversight and
should have been part of the more general UAF fix. The good news is that
having test cases (suprisingly) helps.
Technically, we could detect that we're about to cleanup the
binder-control dentry in binderfs_evict_inode() and then simply clean it
up. But that makes the assumption that the binder driver itself will
never make use of a binderfs binder-control device after the binderfs
instance it belongs to has been unmounted and the superblock for it been
destroyed. While it is unlikely to ever come to this let's be on the
safe side. Performance-wise this also really doesn't matter since the
binder-control device is only every really when creating the binderfs
filesystem or creating additional binder devices. Both operations are
pretty rare.
Fixes:
f0fe2c0f050d ("binder: prevent UAF for binderfs devices II")
Link: https://lore.kernel.org/r/CA+G9fYusdfg7PMfC9Xce-xLT7NiyKSbgojpK35GOm=Pf9jXXrA@mail.gmail.com
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20200311105309.1742827-1-christian.brauner@ubuntu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonathan Neuschäfer [Fri, 6 Mar 2020 22:13:11 +0000 (23:13 +0100)]
parse-maintainers: Mark as executable
[ Upstream commit
611d61f9ac99dc9e1494473fb90117a960a89dfa ]
This makes the script more convenient to run.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Carlo Nonato [Fri, 6 Mar 2020 12:27:31 +0000 (13:27 +0100)]
block, bfq: fix overwrite of bfq_group pointer in bfq_find_set_group()
[ Upstream commit
14afc59361976c0ba39e3a9589c3eaa43ebc7e1d ]
The bfq_find_set_group() function takes as input a blkcg (which represents
a cgroup) and retrieves the corresponding bfq_group, then it updates the
bfq internal group hierarchy (see comments inside the function for why
this is needed) and finally it returns the bfq_group.
In the hierarchy update cycle, the pointer holding the correct bfq_group
that has to be returned is mistakenly used to traverse the hierarchy
bottom to top, meaning that in each iteration it gets overwritten with the
parent of the current group. Since the update cycle stops at root's
children (depth = 2), the overwrite becomes a problem only if the blkcg
describes a cgroup at a hierarchy level deeper than that (depth > 2). In
this case the root's child that happens to be also an ancestor of the
correct bfq_group is returned. The main consequence is that processes
contained in a cgroup at depth greater than 2 are wrongly placed in the
group described above by BFQ.
This commits fixes this problem by using a different bfq_group pointer in
the update cycle in order to avoid the overwrite of the variable holding
the original group reference.
Reported-by: Kwon Je Oh <kwonje.oh2@gmail.com>
Signed-off-by: Carlo Nonato <carlo.nonato95@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dongli Zhang [Tue, 3 Mar 2020 22:14:23 +0000 (14:14 -0800)]
xenbus: req->err should be updated before req->state
[ Upstream commit
8130b9d5b5abf26f9927b487c15319a187775f34 ]
This patch adds the barrier to guarantee that req->err is always updated
before req->state.
Otherwise, read_reply() would not return ERR_PTR(req->err) but
req->body, when process_writes()->xb_write() is failed.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Link: https://lore.kernel.org/r/20200303221423.21962-2-dongli.zhang@oracle.com
Reviewed-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dongli Zhang [Tue, 3 Mar 2020 22:14:22 +0000 (14:14 -0800)]
xenbus: req->body should be updated before req->state
[ Upstream commit
1b6a51e86cce38cf4d48ce9c242120283ae2f603 ]
The req->body should be updated before req->state is updated and the
order should be guaranteed by a barrier.
Otherwise, read_reply() might return req->body = NULL.
Below is sample callstack when the issue is reproduced on purpose by
reordering the updates of req->body and req->state and adding delay in
code between updates of req->state and req->body.
[ 22.356105] general protection fault: 0000 [#1] SMP PTI
[ 22.361185] CPU: 2 PID: 52 Comm: xenwatch Not tainted 5.5.0xen+ #6
[ 22.366727] Hardware name: Xen HVM domU, BIOS ...
[ 22.372245] RIP: 0010:_parse_integer_fixup_radix+0x6/0x60
... ...
[ 22.392163] RSP: 0018:
ffffb2d64023fdf0 EFLAGS:
00010246
[ 22.395933] RAX:
0000000000000000 RBX:
75746e7562755f6d RCX:
0000000000000000
[ 22.400871] RDX:
0000000000000000 RSI:
ffffb2d64023fdfc RDI:
75746e7562755f6d
[ 22.405874] RBP:
0000000000000000 R08:
00000000000001e8 R09:
0000000000cdcdcd
[ 22.410945] R10:
ffffb2d6402ffe00 R11:
ffff9d95395eaeb0 R12:
ffff9d9535935000
[ 22.417613] R13:
ffff9d9526d4a000 R14:
ffff9d9526f4f340 R15:
ffff9d9537654000
[ 22.423726] FS:
0000000000000000(0000) GS:
ffff9d953bc80000(0000) knlGS:
0000000000000000
[ 22.429898] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 22.434342] CR2:
000000c4206a9000 CR3:
00000001ea3fc002 CR4:
00000000001606e0
[ 22.439645] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 22.444941] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 22.450342] Call Trace:
[ 22.452509] simple_strtoull+0x27/0x70
[ 22.455572] xenbus_transaction_start+0x31/0x50
[ 22.459104] netback_changed+0x76c/0xcc1 [xen_netfront]
[ 22.463279] ? find_watch+0x40/0x40
[ 22.466156] xenwatch_thread+0xb4/0x150
[ 22.469309] ? wait_woken+0x80/0x80
[ 22.472198] kthread+0x10e/0x130
[ 22.474925] ? kthread_park+0x80/0x80
[ 22.477946] ret_from_fork+0x35/0x40
[ 22.480968] Modules linked in: xen_kbdfront xen_fbfront(+) xen_netfront xen_blkfront
[ 22.486783] ---[ end trace
a9222030a747c3f7 ]---
[ 22.490424] RIP: 0010:_parse_integer_fixup_radix+0x6/0x60
The virt_rmb() is added in the 'true' path of test_reply(). The "while"
is changed to "do while" so that test_reply() is used as a read memory
barrier.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Link: https://lore.kernel.org/r/20200303221423.21962-1-dongli.zhang@oracle.com
Reviewed-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Josip Pavic [Fri, 21 Feb 2020 17:26:19 +0000 (12:26 -0500)]
drm/amd/display: fix dcc swath size calculations on dcn1
[ Upstream commit
a0275dfc82c9034eefbeffd556cca6dd239d7925 ]
[Why]
Swath sizes are being calculated incorrectly. The horizontal swath size
should be the product of block height, viewport width, and bytes per
element, but the calculation uses viewport height instead of width. The
vertical swath size is similarly incorrectly calculated. The effect of
this is that we report the wrong DCC caps.
[How]
Use viewport width in the horizontal swath size calculation and viewport
height in the vertical swath size calculation.
Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bhawanpreet Lakha [Thu, 20 Feb 2020 16:16:14 +0000 (11:16 -0500)]
drm/amd/display: Clear link settings on MST disable connector
[ Upstream commit
5ac7fd2f597b88ee81f4748ee50cab06192a8dc3 ]
[Why]
If we have a single MST display and we disconnect it, we dont disable that
link. This causes the old link settings to still exist
Now on a replug for MST we think its a link loss and will try to reallocate
mst payload which will fail, throwing warning below.
[ 129.374192] [drm] Failed to updateMST allocation table forpipe idx:0
[ 129.374206] ------------[ cut here ]------------
[ 129.374284] WARNING: CPU: 14 PID: 1710 at
drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/core/dc_link.c:3153
dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu]
[ 129.374285] Modules linked in: amdgpu(OE) amd_iommu_v2 gpu_sched ttm
drm_kms_helper drm fb_sys_fops syscopyarea sysfillrect sysimgblt
binfmt_misc nls_iso8859_1 edac_mce_amd snd_hda_codec_realtek
snd_hda_codec_generic ledtrig_audio kvm snd_hda_codec_hdmi snd_hda_intel
snd_intel_nhlt snd_hda_codec irqbypass snd_hda_core snd_hwdep snd_pcm
snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul snd_seq
crc32_pclmul ghash_clmulni_intel snd_seq_device snd_timer snd aesni_intel
eeepc_wmi crypto_simd asus_wmi joydev cryptd sparse_keymap input_leds
soundcore video glue_helper wmi_bmof mxm_wmi k10temp ccp mac_hid
sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4
hid_generic usbhid hid igb i2c_algo_bit ahci dca i2c_piix4 libahci
gpio_amdpt wmi gpio_generic
[ 129.374318] CPU: 14 PID: 1710 Comm: kworker/14:2 Tainted: G W OE 5.4.0-rc7bhawan+ #480
[ 129.374318] Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 0515 03/30/2017
[ 129.374397] Workqueue: events dm_irq_work_func [amdgpu]
[ 129.374468] RIP: 0010:dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu]
[ 129.374470] Code: 52 20 e8 1c 63 ad f4 48 8b 5d d0 65 48 33 1c 25 28 00
00 00 b8 01 00 00 00 75 16 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3
<0f> 0b e9 fa fe ff ff e8 ed 5b d6 f3 41 0f b6 b6 c4 02 00 00 48 c7
[ 129.374471] RSP: 0018:
ffff9f9141e7fcc0 EFLAGS:
00010246
[ 129.374472] RAX:
0000000000000000 RBX:
ffff91ef0762f800 RCX:
0000000000000000
[ 129.374473] RDX:
0000000000000005 RSI:
ffffffffc0c4a988 RDI:
0000000000000004
[ 129.374474] RBP:
ffff9f9141e7fd10 R08:
0000000000000005 R09:
0000000000000000
[ 129.374475] R10:
0000000000000002 R11:
0000000000000001 R12:
ffff91eebd510c00
[ 129.374475] R13:
ffff91eebd510e58 R14:
ffff91ef052c01b8 R15:
0000000000000006
[ 129.374476] FS:
0000000000000000(0000) GS:
ffff91ef0ef80000(0000) knlGS:
0000000000000000
[ 129.374477] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 129.374478] CR2:
000055623ea01d50 CR3:
0000000408a8c000 CR4:
00000000003406e0
[ 129.374479] Call Trace:
[ 129.374550] dc_link_reallocate_mst_payload+0x12e/0x150 [amdgpu]
[ 129.374617] dc_link_handle_hpd_rx_irq+0x6d4/0x6e0 [amdgpu]
[ 129.374693] handle_hpd_rx_irq+0x77/0x310 [amdgpu]
[ 129.374768] dm_irq_work_func+0x53/0x70 [amdgpu]
[ 129.374774] process_one_work+0x1fd/0x3f0
[ 129.374776] worker_thread+0x255/0x410
[ 129.374778] kthread+0x121/0x140
[ 129.374780] ? process_one_work+0x3f0/0x3f0
[ 129.374781] ? kthread_park+0x90/0x90
[ 129.374785] ret_from_fork+0x22/0x40
[How]
when we disable MST we should clear the cur link settings (lane_count=0 is
good enough). This will cause us to not reallocate payloads earlier than
expected and not throw the warning
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yintian Tao [Fri, 28 Feb 2020 06:24:42 +0000 (14:24 +0800)]
drm/amdgpu: clean wptr on wb when gpu recovery
[ Upstream commit
2ab7e274b86739f4ceed5d94b6879f2d07b2802f ]
The TDR will be randomly failed due to compute ring
test failure. If the compute ring wptr & 0x7ff(ring_buf_mask)
is 0x100 then after map mqd the compute ring rptr will be
synced with 0x100. And the ring test packet size is also 0x100.
Then after invocation of amdgpu_ring_commit, the cp will not
really handle the packet on the ring buffer because rptr is equal to wptr.
Signed-off-by: Yintian Tao <yttao@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexandre Ghiti [Mon, 17 Feb 2020 05:28:47 +0000 (00:28 -0500)]
riscv: Fix range looking for kernel image memblock
[ Upstream commit
a160eed4b783d7b250a32f7e5787c9867abc5686 ]
When looking for the memblock where the kernel lives, we should check
that the memory range associated to the memblock entirely comprises the
kernel image and not only intersects with it.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Damien Le Moal [Wed, 12 Feb 2020 10:34:24 +0000 (19:34 +0900)]
riscv: Force flat memory model with no-mmu
[ Upstream commit
aa2734202acc506d09c8e641db4da161f902df27 ]
Compilation errors trigger if ARCH_SPARSEMEM_ENABLE is enabled for
a nommu kernel. Since the sparsemem model does not make sense anyway
for the nommu case, do not allow selecting this option to always use
the flatmem model.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aaro Koskinen [Wed, 4 Mar 2020 11:17:40 +0000 (13:17 +0200)]
spi: spi_register_controller(): free bus id on error paths
[ Upstream commit
f9981d4f50b475d7dbb70f3022b87a3c8bba9fd6 ]
Some error paths leave the bus id allocated. As a result the IDR
allocation will fail after a deferred probe. Fix by freeing the bus id
always on error.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Message-Id: <
20200304111740.27915-1-aaro.koskinen@nokia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Olivier Moysan [Wed, 4 Mar 2020 10:24:06 +0000 (11:24 +0100)]
ASoC: stm32: sai: manage rebind issue
[ Upstream commit
0d6defc7e0e437a9fd53622f7fd85740f38d5693 ]
The commit
e894efef9ac7 ("ASoC: core: add support to card rebind")
allows to rebind the sound card after a rebind of one of its component.
With this commit, the sound card is actually rebound,
but may be no more functional. The following problems have been seen
with STM32 SAI driver.
1) DMA channel is not requested:
With the sound card rebind the simplified call sequence is:
stm32_sai_sub_probe
snd_soc_register_component
snd_soc_try_rebind_card
snd_soc_instantiate_card
devm_snd_dmaengine_pcm_register
The problem occurs because the pcm must be registered,
before snd_soc_instantiate_card() is called.
Modify SAI driver, to change the call sequence as follows:
stm32_sai_sub_probe
devm_snd_dmaengine_pcm_register
snd_soc_register_component
snd_soc_try_rebind_card
2) DMA channel is not released:
dma_release_channel() is not called when
devm_dmaengine_pcm_release() is executed.
This occurs because SND_DMAENGINE_PCM_DRV_NAME component,
has already been released through devm_component_release().
devm_dmaengine_pcm_release() should be called before
devm_component_release() to avoid this problem.
Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component()
explicitly from SAI driver, to have the right sequence.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Message-Id: <
20200304102406.8093-1-olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vincent Chen [Fri, 21 Feb 2020 02:47:54 +0000 (10:47 +0800)]
riscv: avoid the PIC offset of static percpu data in module beyond 2G limits
[ Upstream commit
0cff8bff7af886af0923d5c91776cd51603e531f ]
The compiler uses the PIC-relative method to access static variables
instead of GOT when the code model is PIC. Therefore, the limitation of
the access range from the instruction to the symbol address is +-2GB.
Under this circumstance, the kernel cannot load a kernel module if this
module has static per-CPU symbols declared by DEFINE_PER_CPU(). The reason
is that kernel relocates the .data..percpu section of the kernel module to
the end of kernel's .data..percpu. Hence, the distance between the per-CPU
symbols and the instruction will exceed the 2GB limits. To solve this
problem, the kernel should place the loaded module in the memory area
[&_end-2G, VMALLOC_END].
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Suggested-by: Alexandre Ghiti <alex@ghiti.fr>
Suggested-by: Anup Patel <anup@brainfault.org>
Tested-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Carlos de Paula <me@carlosedp.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mike Snitzer [Fri, 28 Feb 2020 23:11:53 +0000 (18:11 -0500)]
dm integrity: use dm_bio_record and dm_bio_restore
[ Upstream commit
248aa2645aa7fc9175d1107c2593cc90d4af5a4e ]
In cases where dec_in_flight() has to requeue the integrity_bio_wait
work to transfer the rest of the data, the bio's __bi_remaining might
already have been decremented to 0, e.g.: if bio passed to underlying
data device was split via blk_queue_split().
Use dm_bio_{record,restore} rather than effectively open-coding them in
dm-integrity -- these methods now manage __bi_remaining too.
Depends-on:
f7f0b057a9c1 ("dm bio record: save/restore bi_end_io and bi_integrity")
Reported-by: Daniel Glöckner <dg@emlix.com>
Suggested-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-rpi.git / log