Vineeth TM [Fri, 7 Aug 2015 01:08:21 +0000 (10:08 +0900)]
value: free caps during failure
While calling gst_value_deserialize_sample, if there is a failure
after caps is ref'ed, then caps is getting leaked. Hence checking for
caps in fail: goto condition and unref'ing it
https://bugzilla.gnome.org/show_bug.cgi?id=753338
Thibault Saunier [Tue, 21 Jul 2015 11:35:33 +0000 (13:35 +0200)]
registry: Add plugins to the registry we are loading and not default one
When running gst_registry_scan_plugin_file we were losing the
information about the registry being loaded and ended up adding the
plugin to the default registry which was not correct.
https://bugzilla.gnome.org/show_bug.cgi?id=752662
Nicolas Dufresne [Wed, 5 Aug 2015 19:51:27 +0000 (15:51 -0400)]
basesink: Only drop buffer if their PTS is out of segment
As of now, even for stream completly inside segment, there is no
guarantied that the DTS will be inside the segment. Specifically
for H.264 with B-Frames, the first few frames often have DTS that
are before the segment.
Instead of using the sync timestamp to clip out of segment buffer,
take the duration from the start/stop provided by the sub-class, and
check if the pts and pts_end is out of segment.
https://bugzilla.gnome.org/show_bug.cgi?id=752791
Luis de Bethencourt [Wed, 5 Aug 2015 13:05:25 +0000 (14:05 +0100)]
harness: don't run code inside g_assert
Even though asserts can't be disabled in GstHarness, Coverity still
complains about running code inside them. Moving the code to outside the
g_asserts().
CID #1311326, #1311327, #1311328
Wim Taymans [Fri, 17 Jul 2015 08:18:02 +0000 (10:18 +0200)]
devicemonitor: get a list of currently monitored providers
Get a list of the currently monitored providers.
George Kiagiadakis [Sun, 2 Aug 2015 15:38:14 +0000 (17:38 +0200)]
pad: fix invalid unref after IDLE probe on non-OK flow return
In case there is an IDLE probe fired from gst_pad_push_data and it
doesn't return GST_FLOW_OK, the code jumps to the probe_stopped
label which tries to unref the data object. However, at this point
the data object belongs downstream and must not be touched.
By setting data = NULL, the code skips this unref.
https://bugzilla.gnome.org//show_bug.cgi?id=753151
Jan Schmidt [Tue, 4 Aug 2015 10:08:04 +0000 (20:08 +1000)]
buffer: Fix the name of the parentbuffermeta debug category.
Don't use 'glbufferrefmeta' as the debug category for the
parent buffer meta.
Eunhae Choi [Tue, 4 Aug 2015 04:45:09 +0000 (13:45 +0900)]
queue2: not update upstream size with negative value
upstream_size can be negative but queue->upstream_size is unsigned type.
to get a chance to update queue->upstream_size in gst_queue2_get_range()
it should keep the default value.
https://bugzilla.gnome.org/show_bug.cgi?id=753011
Jan Schmidt [Tue, 4 Aug 2015 09:59:28 +0000 (19:59 +1000)]
buffer: Remove extra debug symbol from exports
Don't export the debug variable for the parent_buffer_meta.
This was accidentally exported and shouldn't be public
Stefan Sauer [Mon, 3 Aug 2015 22:11:24 +0000 (00:11 +0200)]
filesink: use GST_INFO_OBJECT for more detail
Helps to distiguish multiple filesinks.
Tim-Philipp Müller [Thu, 30 Jul 2015 16:29:25 +0000 (17:29 +0100)]
docs: info: remove 0.8 terminology from log level description
We don't "iterate" bins or pipelines any more.
Tim-Philipp Müller [Thu, 30 Jul 2015 11:17:16 +0000 (12:17 +0100)]
tests: baseparse: fix buffer leak in unit test
Fixes make check-valgrind
Nicolas Dufresne [Wed, 29 Jul 2015 01:14:22 +0000 (21:14 -0400)]
doc/seekflags: Fix cross references
This fixes miss-use of @ instead of % to refer to enumeration
values.
Tim-Philipp Müller [Tue, 28 Jul 2015 21:30:54 +0000 (22:30 +0100)]
docs: add a few more new symbols and defines
Nicolas Dufresne [Tue, 28 Jul 2015 20:57:43 +0000 (16:57 -0400)]
doc/capsfilter: Document filtering modes
This is documentation for the HTML documentation.
Nicolas Dufresne [Tue, 28 Jul 2015 20:50:55 +0000 (16:50 -0400)]
doc/filesink: Add BufferMode enumeration
This is purely for documentation purpose. This way the values will
show up in the HTML documentation.
Nicolas Dufresne [Tue, 28 Jul 2015 19:50:40 +0000 (15:50 -0400)]
doc/gsthardness: Fix typo in GstAllocationParams
It's not GstAllocatorParams but GstAllocationParams.
Nicolas Dufresne [Tue, 28 Jul 2015 19:46:09 +0000 (15:46 -0400)]
doc/gstharness: Remove unknown parameter
sink_elenment_name is not a parameter of gst_harness_add_sink_harness()
function, but still it show up in documentation.
Sebastian Dröge [Tue, 28 Jul 2015 09:19:04 +0000 (12:19 +0300)]
capsfilter: Only remember previous filter caps if they were actually used for something
If nobody ever saw the previous filter caps, nothing could've negotiated with
them and we can just pretend they never existed at all.
Sebastian Dröge [Tue, 28 Jul 2015 09:16:12 +0000 (12:16 +0300)]
capsfilter: When switching caps change modes, forget all previous caps
Olivier Crête [Thu, 23 Jul 2015 22:15:05 +0000 (18:15 -0400)]
basetransform: Return FLOW_FLUSHING if negotiation fails during shutdown
https://bugzilla.gnome.org/show_bug.cgi?id=752800
Olivier Crête [Wed, 22 Jul 2015 22:55:29 +0000 (18:55 -0400)]
harness: Fix indendation
Nicolas Dufresne [Tue, 21 Jul 2015 17:14:59 +0000 (13:14 -0400)]
basetransform: Avoid increasing query reference
gst_query_find_allocation_meta() requires the query to be
writable to work. This patch ensure avoids taking a reference
on the query, so we can now check if a certain allocation meta
is present.
https://bugzilla.gnome.org/show_bug.cgi?id=752661
Tim-Philipp Müller [Wed, 22 Jul 2015 14:38:06 +0000 (15:38 +0100)]
docs: fix description of gst_buffer_extract_dup()
No GBytes involved.
Thiago Santos [Tue, 21 Jul 2015 03:17:28 +0000 (00:17 -0300)]
concat: dot not reset pad states too early
Resetting the flushing state of the pads at the end of the
PAUSED_TO_READY transition will make pads handle serialized
queries again which will wait for non-active pads and might
cause deadlocks when stopping the pipeline.
Move the reset to the READY_TO_PAUSED instead.
https://bugzilla.gnome.org/show_bug.cgi?id=752623
Havard Graff [Mon, 20 Jul 2015 14:18:06 +0000 (16:18 +0200)]
harness: add functions for adding sub-harnesses directly
By introducing gst_harness_add_src_harness and gst_harness_add_sink_harness
we collect all sub-harness setup in one function, making the previous
sub-harness creation functions now calls these directly, and making it
much easier (and less error-prone) to add your own src or sink-harness
using the more generic harness-creation functions.
Nicolas Dufresne [Fri, 17 Jul 2015 21:44:52 +0000 (17:44 -0400)]
baseparse: Don't override gst_segment_do_seek()
This line has no purpose, clearly gst_segment_do_seek() is doing
the right job, also, having the start time (a timestamp) be that
same as time (the stream time) is quite odd.
https://bugzilla.gnome.org/show_bug.cgi?id=750783
Nicolas Dufresne [Fri, 17 Jul 2015 21:43:26 +0000 (17:43 -0400)]
baseparse: Fix extrapolation of seeksegment.stop
The stop shall be relative to start if extrapolated from the
duration.
https://bugzilla.gnome.org/show_bug.cgi?id=750783
Wim Taymans [Thu, 16 Jul 2015 16:47:20 +0000 (18:47 +0200)]
devicemonitor: do start and stop outside of the lock
Release the monitor lock when calling the provider start/stop methods.
Because we release the lock now, We need to make sure we check the
cookie again and keep track of started and removed providers.
Wim Taymans [Thu, 16 Jul 2015 16:43:06 +0000 (18:43 +0200)]
deviceprovider: small cleanups
Protect against wrong arguments.
Clean up the header file indentation.
Wim Taymans [Thu, 16 Jul 2015 15:25:24 +0000 (17:25 +0200)]
devicemonitor: keep order of providers and devices
The deviceproviders are added to the array sorted by their rank. Make
sure we keep this ordering when removing a provider.
We use _prepend to collect the devices, use g_list_reverse to get the
devices in the right order; sorted by rank and in the same order as
returned by the provider.
Tim-Philipp Müller [Thu, 16 Jul 2015 16:50:49 +0000 (17:50 +0100)]
harness: fix indentation
Tim-Philipp Müller [Thu, 16 Jul 2015 16:50:06 +0000 (17:50 +0100)]
harness: fix pad template leak
Tim-Philipp Müller [Thu, 16 Jul 2015 16:13:35 +0000 (17:13 +0100)]
docs: drop reference to sourceforge mailing list adress
Havard Graff [Thu, 16 Jul 2015 15:53:40 +0000 (17:53 +0200)]
harness: don't re-establish the harness sink and src pads
Given that the element has the possibility to have one, they should
already be there.
https://bugzilla.gnome.org/show_bug.cgi?id=752498
Stian Selnes [Mon, 13 Jul 2015 09:03:13 +0000 (11:03 +0200)]
harness: Improve detection of element type
The element flag does not indicate wether a bin should be tested as a
source or as a sink, eg. a bin with the sink flag may still have a
source pad and a bin with the source flag may have a sink pad. In this
case it is better to determine the element type by looking at the
available pads and pad templates.
Also rename srcpad and sinkpad where it actually represents
element_srcpad_name and element_sinkpad_name.
https://bugzilla.gnome.org/show_bug.cgi?id=752493
Stian Selnes [Mon, 13 Jul 2015 09:10:49 +0000 (11:10 +0200)]
harness: Forward sticky events to sink harness
Fixes issue where if a sink harness was added late the sticky events
would not be forwared.
https://bugzilla.gnome.org/show_bug.cgi?id=752494
Tim-Philipp Müller [Thu, 16 Jul 2015 11:36:14 +0000 (12:36 +0100)]
harness: make header nicer to read
Tim-Philipp Müller [Thu, 16 Jul 2015 09:36:36 +0000 (10:36 +0100)]
docs: add new function to API docs
Wim Taymans [Wed, 15 Jul 2015 16:21:13 +0000 (18:21 +0200)]
device: add generic struct with properties
Add a generic structure to hold any additional properties about the
device.
Tim-Philipp Müller [Tue, 14 Jul 2015 11:44:12 +0000 (12:44 +0100)]
tee: fix typo in allow-not-linked property description
Tim-Philipp Müller [Mon, 13 Jul 2015 13:24:34 +0000 (14:24 +0100)]
docs: bus: mention main loop requirement in gst_bus_add_watch() docs
Prashant Gotarne [Wed, 18 Mar 2015 10:35:34 +0000 (16:05 +0530)]
task: add function guard for _set_lock() and fix guard for _join()
Should only access the object structure after checking
it's valid in gst_task_join().
https://bugzilla.gnome.org/show_bug.cgi?id=746385
https://bugzilla.gnome.org/show_bug.cgi?id=746431
Philippe Normand [Tue, 19 May 2015 16:58:11 +0000 (18:58 +0200)]
protection: implement meta transform function
Copy the GstMeta contents over to the new buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=749590
Vineeth TM [Fri, 10 Jul 2015 00:12:15 +0000 (09:12 +0900)]
baseparse: estimate duration on EOS
For files which are smaller than 1.5 seconds, the duration
estimation does not happen. So the duration will always be
displayed as 0. Updating the duration on EOS when the estimation
has not happened already
https://bugzilla.gnome.org/show_bug.cgi?id=750131
Hyunjun Ko [Fri, 10 Jul 2015 02:01:21 +0000 (11:01 +0900)]
adapter: change log message properly
https://bugzilla.gnome.org/show_bug.cgi?id=752116
Justin Joy [Wed, 8 Jul 2015 15:12:51 +0000 (00:12 +0900)]
docs: add StreamidDemux to documentation
https://bugzilla.gnome.org/show_bug.cgi?id=749873
Hyunjun Ko [Wed, 8 Jul 2015 15:21:42 +0000 (00:21 +0900)]
adapter: fix to get valid (buffer_)list
get_list/get_buffer_list should be done with buffers in adapter remaining
while take_list/take_buffer_list flushes each buffer one by one.
https://bugzilla.gnome.org/show_bug.cgi?id=752116
Hyunjun Ko [Wed, 8 Jul 2015 11:06:27 +0000 (20:06 +0900)]
adapter: unit test for new get_(buffer_)list
Arnaud Vrac [Wed, 8 Jul 2015 10:00:56 +0000 (12:00 +0200)]
baseparse: put buffer in a correct state after gst_adapter_get_buffer call
We must make the buffer writable to write its PTS and DTS, and also
reset its duration.
The behaviour is now the same as before commit
c3bcbadd, except metas
might still be attached to the buffer extracted from the adapter.
https://bugzilla.gnome.org/show_bug.cgi?id=752092
Tim-Philipp Müller [Tue, 7 Jul 2015 14:02:45 +0000 (15:02 +0100)]
harness: fix indentation and replace stress test function macros
These screw with indentation and seem a bit trivial. Just copy'n'paste.
Hyunjun Ko [Tue, 7 Jul 2015 01:46:48 +0000 (10:46 +0900)]
meta: transform_func: return FALSE if not supported or failed
https://bugzilla.gnome.org/show_bug.cgi?id=751778
Havard Graff [Tue, 7 Jul 2015 09:53:07 +0000 (11:53 +0200)]
identity: refactor and add tests using GstHarness
Writing a test for unscheduling the gst_clock_id_wait inside the
identity element, found an invalid read, caused by removing the clock-id
when calling _unschedule instead of letting the code calling _wait remove
the clock-id after being unscheduled.
https://bugzilla.gnome.org/show_bug.cgi?id=752055
Tim-Philipp Müller [Sat, 12 Apr 2014 18:48:15 +0000 (19:48 +0100)]
harness: make sure g_assert() statements are always active
We have code with side effects inside g_assert()s, so make
sure those are always enabled here (they might otherwise
get disabled for release builds).
Tim-Philipp Müller [Mon, 6 Jul 2015 23:56:41 +0000 (00:56 +0100)]
harness: rename GstHarnessPrepareBuffer -> GstHarnessPrepareBufferFunc
https://bugzilla.gnome.org/show_bug.cgi?id=751916
Tim-Philipp Müller [Mon, 6 Jul 2015 23:53:48 +0000 (00:53 +0100)]
docs: add GstHarness to documentation
https://bugzilla.gnome.org/show_bug.cgi?id=751916
Havard Graff [Mon, 16 Dec 2013 09:47:47 +0000 (10:47 +0100)]
check: Add GstHarness convenience API for unit tests
http://gstconf.ubicast.tv/videos/gstharness-again-a-follow-up/
https://bugzilla.gnome.org/show_bug.cgi?id=751916
Vineeth TM [Mon, 6 Jul 2015 00:26:58 +0000 (09:26 +0900)]
baseparse: reverse playback in pull mode
right now reverse playback is disabled in pull mode.
enabling the code for the same and changing a bit of logic
to make reverse playback work.
https://bugzilla.gnome.org/show_bug.cgi?id=750783
Vineeth T M [Fri, 19 Jun 2015 23:33:26 +0000 (08:33 +0900)]
baseparse: add reverse playback test in pull mode
add test for reverse playback in pull mode and compare
the buffers being received in sink chain to make sure
the playback is allright
https://bugzilla.gnome.org/show_bug.cgi?id=750783
Arun Raghavan [Mon, 6 Jul 2015 09:01:24 +0000 (14:31 +0530)]
Revert "scripts: Allow passing make flags to git-update.sh"
This reverts commit
ab5fdd72129ea61e8dff51cdc0afcccac03ebc2b.
We can use the MAKEFLAGS environment variable to pass options to make,
so avoid adding another mechanism that could be confusing.
Arun Raghavan [Mon, 6 Jul 2015 05:46:27 +0000 (11:16 +0530)]
pad: Clarify pad probe return type documentation
Song Bing [Thu, 2 Jul 2015 06:32:21 +0000 (14:32 +0800)]
basesink: Shouldn't drop buffer when sync=false
Shouldn't drop buffer when sync=false
https://bugzilla.gnome.org/show_bug.cgi?id=751819
Arun Raghavan [Mon, 6 Jul 2015 05:55:50 +0000 (11:25 +0530)]
scripts: Allow passing make flags to git-update.sh
Mostly adding this for add a -jN as appropriate while building.
Tim-Philipp Müller [Sat, 30 May 2015 13:27:05 +0000 (14:27 +0100)]
queue: avoid slice allocs/frees for each item
Microoptimisation: Let GstQueueArray store our
item struct. That way we don't have to alloc/free
temporary QueueItem slices for every item we want
to put into the queue.
https://bugzilla.gnome.org/show_bug.cgi?id=750149
Tim-Philipp Müller [Sat, 30 May 2015 12:07:50 +0000 (13:07 +0100)]
queuearray: allow storing of structs in addition to pointers
This way we don't have to allocate/free temporary structs
for storing things in the queue array.
API: gst_queue_array_new_for_struct()
API: gst_queue_array_push_tail_struct()
API: gst_queue_array_peek_head_struct()
API: gst_queue_array_pop_head_struct()
API: gst_queue_array_drop_struct()
https://bugzilla.gnome.org/show_bug.cgi?id=750149
Stefan Sauer [Fri, 3 Jul 2015 19:57:55 +0000 (21:57 +0200)]
Automatic update of common submodule
From f74b2df to 9aed1d7
Olivier Crête [Fri, 19 Jun 2015 04:05:44 +0000 (00:05 -0400)]
pad: Enforce NEED_PARENT flag also for chain
The check for the presence of the parent in the presence of
the NEED_PARENT flag was missing for the chain function. Also keep
a ref on the parent in case the pad is removed mid-chain.
Stefan Sauer [Fri, 3 Jul 2015 13:55:08 +0000 (15:55 +0200)]
docs: update for two missing elements
Concat was not linked and streamiddemux was missing.
Stefan Sauer [Fri, 3 Jul 2015 10:37:54 +0000 (12:37 +0200)]
docs: another sweep canonicalizing the plugin docs sections file
Use underscores for capsfilter macros. Correct the type-name for fakesrc
if we ever implement the enum.
Stefan Sauer [Fri, 3 Jul 2015 09:45:19 +0000 (11:45 +0200)]
docs: order and canonicalize the -sections.txt file
Have all sections in alphabetical order. Also make the macro order consistent.
This is a preparation for generating the file. Remove GET_CLASS macro for
typefine element, since it is not used and the header is not installed.
Stian Selnes [Mon, 16 Dec 2013 10:24:17 +0000 (11:24 +0100)]
memory: Add missing field initializers to GstMapInfo
https://bugzilla.gnome.org/show_bug.cgi?id=751881
Luis de Bethencourt [Thu, 2 Jul 2015 14:10:43 +0000 (15:10 +0100)]
inputselector: remove always-true check
event can't be NULL, it has been dereferenced by GST_EVENT_TYPE (), and no
case frees the pointer. Remove unnecessary check which will always be True.
CID #1308955
Sebastian Dröge [Wed, 1 Jul 2015 08:50:19 +0000 (10:50 +0200)]
transform: Also copy POOL metas and make sure to copy over metas when creating subbuffers
POOL meta just means that this specific instance of the meta is related to a
pool, a copy should be made when reasonable and the flag should just not be
set in the copy.
Sebastian Dröge [Wed, 1 Jul 2015 08:45:01 +0000 (10:45 +0200)]
adapter: Also copy POOL metas and make sure to copy over metas when creating subbuffers
POOL meta just means that this specific instance of the meta is related to a
pool, a copy should be made when reasonable and the flag should just not be
set in the copy.
Sebastian Dröge [Wed, 1 Jul 2015 08:36:36 +0000 (10:36 +0200)]
buffer: Don't copy "memory" metas unconditionally
Don't copy memory metas if we only copied part of the buffer, didn't
copy memories or merged memories. In all these cases the memory
structure has changed and the memory meta becomes meaningless.
https://bugzilla.gnome.org/show_bug.cgi?id=751712
Sebastian Dröge [Wed, 1 Jul 2015 08:25:15 +0000 (10:25 +0200)]
Revert "buffer: Don't copy POOLED and memory metadata unconditionally"
This reverts commit
7a08fa5ec4804f104e9aa9f458322f6eb49a7e49.
Sebastian Dröge [Tue, 30 Jun 2015 11:38:10 +0000 (13:38 +0200)]
buffer: Don't copy POOLED and memory metadata unconditionally
https://bugzilla.gnome.org/show_bug.cgi?id=751712
Sebastian Dröge [Tue, 30 Jun 2015 09:18:24 +0000 (11:18 +0200)]
baseparse: Use new gst_adapter_get_buffer() API instead of gst_adapter_map()
This preserves GstMeta properly unless the subclass does special things. It's
enough to make h264parse's stream-format/alignment conversion pass through
metas as needed.
https://bugzilla.gnome.org/show_bug.cgi?id=742385
Sebastian Dröge [Tue, 30 Jun 2015 09:11:25 +0000 (11:11 +0200)]
adapter: Add get variants of the buffer based take functions
Main difference to gst_adapter_map() for all practical purposes is that
GstMeta of the buffers will be preserved.
https://bugzilla.gnome.org/show_bug.cgi?id=742385
Sebastian Dröge [Mon, 29 Jun 2015 15:03:10 +0000 (17:03 +0200)]
adapter: Copy over GstMeta from the input buffers to the output
All functions that return a GstBuffer or a list of them will now copy
all GstMeta from the input buffers except for meta with GST_META_FLAG_POOLED
flag or "memory" tag.
This is similar to the existing behaviour that the caller can't assume
anything about the buffer flags, timestamps or other metadata. And it's
also the same that gst_adapter_take_buffer_fast() did before, and what
gst_adapter_take_buffer() did if part of the first buffer or the complete
first buffer was requested.
https://bugzilla.gnome.org/show_bug.cgi?id=742385
Olivier Crête [Tue, 30 Jun 2015 00:27:12 +0000 (20:27 -0400)]
ptp: Init function can take a NULL interfaces array
Vineeth TM [Mon, 29 Jun 2015 04:57:11 +0000 (13:57 +0900)]
tests: caps: fix test_intersect_flagset failure
test_intersect_flagset fails because when caps is being
created, flags and mask are being cast to uint64 while
they should be uint. This results in invalid memory access
or a segfault.
https://bugzilla.gnome.org/show_bug.cgi?id=751628
Thibault Saunier [Mon, 29 Jun 2015 12:22:46 +0000 (14:22 +0200)]
scripts: Fix GST_VALIDATE_PLUGIN_PATH
It moved recently
Sebastian Dröge [Mon, 29 Jun 2015 11:58:04 +0000 (13:58 +0200)]
basetransform: Fix up documentation of transform_meta vfunc
By default we copy all metas that have no tags.
Tim-Philipp Müller [Mon, 29 Jun 2015 09:41:27 +0000 (10:41 +0100)]
directcontrolbinding: fix ABI break
Structure size was increased without adjustment of the padding.
https://bugzilla.gnome.org/show_bug.cgi?id=751622
https://bugzilla.gnome.org/show_bug.cgi?id=740502
Prashant Gotarne [Thu, 19 Mar 2015 10:25:14 +0000 (15:55 +0530)]
task: guard against NULL task function
https://bugzilla.gnome.org/show_bug.cgi?id=746439
Miguel París Díaz [Thu, 14 May 2015 09:48:45 +0000 (11:48 +0200)]
funnel: add "forward-sticky-events" property
It is useful to avoid sending sticky event on stream changes.
https://bugzilla.gnome.org/show_bug.cgi?id=749315
Sebastian Dröge [Wed, 24 Jun 2015 22:04:07 +0000 (00:04 +0200)]
Back to development
Sebastian Dröge [Wed, 24 Jun 2015 20:49:17 +0000 (22:49 +0200)]
Release 1.5.2
Sebastian Dröge [Wed, 24 Jun 2015 20:45:00 +0000 (22:45 +0200)]
Update .po files
Thiago Santos [Tue, 23 Jun 2015 02:37:27 +0000 (23:37 -0300)]
tests: gstutils: fix wrong description of test element
It is a fakesink with request pads, not a source
Jonas Holmberg [Wed, 24 Jun 2015 13:35:16 +0000 (15:35 +0200)]
bufferpool: Fixed compiler warning
The pool variable was unused when buidling with debug disabled.
Sebastian Dröge [Wed, 24 Jun 2015 09:13:40 +0000 (11:13 +0200)]
po: Update translations
Sebastian Dröge [Wed, 24 Jun 2015 09:12:03 +0000 (11:12 +0200)]
win32: Update .def file for new API
Hyunjun Ko [Wed, 24 Jun 2015 05:19:04 +0000 (14:19 +0900)]
basesink: need to deep-copy last buffer list in drain
https://bugzilla.gnome.org/show_bug.cgi?id=751420
Sebastian Dröge [Wed, 24 Jun 2015 08:52:02 +0000 (10:52 +0200)]
bufferlist: Warn if copying a buffer fails in gst_buffer_list_copy_deep()
Hyunjun Ko [Wed, 24 Jun 2015 05:18:47 +0000 (14:18 +0900)]
bufferlist: add new api gst_buffer_list_copy_deep
https://bugzilla.gnome.org/show_bug.cgi?id=751420
Jonas Holmberg [Tue, 23 Jun 2015 14:58:56 +0000 (16:58 +0200)]
gstcheck: Print newline in message handler
The message handler is supposed to print a newline after the message
just like the default message handler.
Song Bing [Fri, 12 Jun 2015 08:54:32 +0000 (16:54 +0800)]
inputselector: Handle different duration track selection
Support track switch from EOS track to non-EOS one.
https://bugzilla.gnome.org/show_bug.cgi?id=750761
Song Bing [Fri, 12 Jun 2015 08:52:46 +0000 (16:52 +0800)]
pad: Clear EOS flag after received STREAM_START event
Clear EOS flag after received STREAM_START event
https://bugzilla.gnome.org/show_bug.cgi?id=750761