Bhupesh Sharma [Tue, 14 Mar 2023 08:36:32 +0000 (14:06 +0530)]
arm64: dts: qcom: sm6115: Cleanup USB node's label
There is only one USB controller present on SM6115 / SM4250
Qualcomm SoC, so drop the numbering used with USB node's label
names in the dtsi and the related sm4250-oneplus-billie2.dts.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314083633.1882214-2-bhupesh.sharma@linaro.org
Johan Hovold [Thu, 16 Mar 2023 14:12:52 +0000 (15:12 +0100)]
arm64: dts: qcom: sc8280xp: fix external display power domain
Fix the external display controller nodes which erroneously described
the controllers as belonging to CX rather than MMCX.
Fixes:
19d3bb90754f ("arm64: dts: qcom: sc8280xp: Add USB-C-related DP blocks")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230316141252.2436-1-johan+linaro@kernel.org
Stephan Gerhold [Wed, 8 Mar 2023 12:36:17 +0000 (13:36 +0100)]
arm64: dts: qcom: msm8916: Fix tsens_mode unit address
The reg address of the tsens_mode nvmem cell is correct but the unit
address does not match (0xec vs 0xef). Fix it. No functional change.
Fixes:
24aafd041fb2 ("arm64: dts: qcom: msm8916: specify per-sensor calibration cells")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308123617.101211-1-stephan.gerhold@kernkonzept.com
Neil Armstrong [Wed, 8 Mar 2023 08:32:54 +0000 (09:32 +0100)]
arm64: dts: qcom: sm8550: misc style fixes
Miscellaneous DT fixes to remove spurious blank line and enhance readability.
Fixes:
ffc50b2d3828 ("arm64: dts: qcom: Add base SM8550 dtsi")
Fixes:
d7da51db5b81 ("arm64: dts: qcom: sm8550: add display hardware devices")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308-topic-sm8550-upstream-dt-fixups-v1-3-595b02067672@linaro.org
Neil Armstrong [Wed, 8 Mar 2023 08:32:53 +0000 (09:32 +0100)]
arm64: dts: qcom: sm8550: fix qup_spi0_cs node
The node is incomplete and doesn't need a subnode, add the missing
properties and move everything to the root of qup-spi0-cs-state node.
Fixes:
ffc50b2d3828 ("arm64: dts: qcom: Add base SM8550 dtsi")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308-topic-sm8550-upstream-dt-fixups-v1-2-595b02067672@linaro.org
Krzysztof Kozlowski [Sat, 4 Mar 2023 12:33:58 +0000 (13:33 +0100)]
arm64: dts: qcom: sm8250-xiaomi-elish: correct GPIO keys wakeup
gpio-keys,wakeup is a deprecated property:
sm8250-xiaomi-elish.dtb: gpio-keys: key-vol-up: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304123358.34274-8-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 4 Mar 2023 12:33:57 +0000 (13:33 +0100)]
arm64: dts: qcom: sm8250-sony-xperia: correct GPIO keys wakeup
gpio-keys,wakeup is a deprecated property:
sm8250-sony-xperia-edo-pdx206.dtb: gpio-keys: key-vol-down: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304123358.34274-7-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 4 Mar 2023 12:33:56 +0000 (13:33 +0100)]
arm64: dts: qcom: sm6115p-lenovo-j606f: correct GPIO keys wakeup
gpio-keys,wakeup is a deprecated property:
sm6115p-lenovo-j606f.dtb: gpio-keys: key-volume-up: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304123358.34274-6-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 4 Mar 2023 12:33:55 +0000 (13:33 +0100)]
arm64: dts: qcom: sdm630-sony-xperia: correct GPIO keys wakeup
gpio-keys,wakeup is a deprecated property:
sdm630-sony-xperia-nile-voyager.dtb: gpio-keys: key-vol-down: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304123358.34274-5-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 4 Mar 2023 12:33:54 +0000 (13:33 +0100)]
arm64: dts: qcom: sc7280-idp: correct GPIO keys wakeup
gpio-keys,wakeup is a deprecated property:
sc7280-idp.dtb: gpio-keys: key-volume-up: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304123358.34274-4-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 4 Mar 2023 12:33:53 +0000 (13:33 +0100)]
arm64: dts: qcom: msm8998-sony-xperia: correct GPIO keys wakeup
gpio-keys,wakeup is a deprecated property:
msm8998-sony-xperia-yoshino-lilac.dtb: gpio-keys: button-vol-down: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304123358.34274-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 4 Mar 2023 12:33:52 +0000 (13:33 +0100)]
arm64: dts: qcom: msm8998-fxtec: correct GPIO keys wakeup
gpio-keys,wakeup is a deprecated property:
msm8998-fxtec-pro1.dtb: gpio-hall-sensors: event-hall-sensor1: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304123358.34274-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Sat, 4 Mar 2023 12:33:51 +0000 (13:33 +0100)]
arm64: dts: qcom: sm8150-kumano: correct GPIO keys wakeup
gpio-keys,wakeup is a deprecated property:
sm8150-sony-xperia-kumano-bahamut.dtb: gpio-keys: key-camera-focus: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304123358.34274-1-krzysztof.kozlowski@linaro.org
Douglas Anderson [Thu, 2 Mar 2023 21:11:07 +0000 (13:11 -0800)]
arm64: dts: qcom: sc7180: Delete mrbland
The mrbland board was never actually produced and there has been no
activity around the board for quite some time. It seems highly
unlikely to magically get revived. There should be nobody in need of
these device trees, so let's delete them. If somehow the project
resurrects itself then we can re-add support, perhaps just for -rev1+.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230302131031.v2.4.I79eee3b8e9eb3086ae02760e97a2e12ffa8eb4f0@changeid
Douglas Anderson [Thu, 2 Mar 2023 21:11:06 +0000 (13:11 -0800)]
arm64: dts: qcom: sc7180: Delete lazor-rev0
lazor-rev0 was a pile of parts. While I kept the pile of parts for
lazor running on my desk for longer than I usually do, those days are
still long past. Let's finally delete support for lazor-rev0.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230302131031.v2.3.I30128a6f4b60b096770186430036afb40ede6f70@changeid
Douglas Anderson [Thu, 2 Mar 2023 21:11:05 +0000 (13:11 -0800)]
arm64: dts: qcom: sc7180: Delete kingoftown-rev0
The earliest kingoftown that I could find in my pile of boards was
-rev2 and even that revision looks pretty rough (plastics on the case
are very unfinished). Though I don't actually have details about how
many -rev0 devices were produced, I can't imagine anyone still using
one. Let's delete support.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230302131031.v2.2.I68cbe5d5d45074428469da8c52f1d6a78bdc62fc@changeid
Douglas Anderson [Thu, 2 Mar 2023 21:11:04 +0000 (13:11 -0800)]
arm64: dts: qcom: sc7180: Delete wormdingler-rev0
The earliest wormdingler I could find in my pile of hardware is
-rev1. I believe that -rev0 boards were just distributed as a pile of
components with no case. At this point I can't imagine anyone needing
to make wormdingler-rev0 work, so let's delete support for it.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230302131031.v2.1.Id0cd5120469eb200118c0c7b8ee8209f877767b4@changeid
Adam Skladowski [Thu, 2 Mar 2023 12:30:49 +0000 (13:30 +0100)]
arm64: dts: qcom: msm8976: Add and provide xo clk to rpmcc
In order for consumers of RPMCC XO clock to probe successfully
their parent needs to be feed with reference clock to obtain proper rate,
add fixed xo-board clock and supply it to rpmcc to make consumers happy.
Frequency setting is left per board basis just like on other recent trees.
Fixes:
0484d3ce0902 ("arm64: dts: qcom: Add DTS for MSM8976 and MSM8956 SoCs")
Fixes:
ff7f6d34ca07 ("arm64: dts: qcom: Add support for SONY Xperia X/X Compact")
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[bjorn: Squashed the two patches]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230302123051.12440-1-a39.skl@gmail.com
Link: https://lore.kernel.org/r/20230302123051.12440-2-a39.skl@gmail.com
Manivannan Sadhasivam [Tue, 28 Feb 2023 16:47:49 +0000 (22:17 +0530)]
arm64: dts: qcom: sm8350: Fix the PCI I/O port range
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x60200000, 0x40200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes:
6daee40678a0 ("arm64: dts: qcom: sm8350: add PCIe devices")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-14-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Tue, 28 Feb 2023 16:47:48 +0000 (22:17 +0530)]
arm64: dts: qcom: sm8450: Fix the PCI I/O port range
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x60200000, 0x40200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes:
bc6588bc25fb ("arm64: dts: qcom: sm8450: add PCIe1 root device")
Fixes:
7b09b1b47335 ("arm64: dts: qcom: sm8450: add PCIe0 RC device")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-13-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Tue, 28 Feb 2023 16:47:47 +0000 (22:17 +0530)]
arm64: dts: qcom: sm8150: Fix the PCI I/O port range
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x60200000, 0x40200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes:
a1c86c680533 ("arm64: dts: qcom: sm8150: Add PCIe nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-12-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Tue, 28 Feb 2023 16:47:46 +0000 (22:17 +0530)]
arm64: dts: qcom: sc8280xp: Fix the PCI I/O port range
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x30200000, 0x32200000, 0x34200000, 0x38200000, 0x3c200000) specified in
the ranges property for I/O region.
Fixes:
813e83157001 ("arm64: dts: qcom: sc8280xp/sa8540p: add PCIe2-4 nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-11-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Tue, 28 Feb 2023 16:47:45 +0000 (22:17 +0530)]
arm64: dts: qcom: qcs404: Use 0x prefix for the PCI I/O and MEM ranges
To maintain the uniformity, let's use the 0x prefix for the values of
ranges property.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-10-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Tue, 28 Feb 2023 16:47:44 +0000 (22:17 +0530)]
arm64: dts: qcom: sm8250: Fix the PCI I/O port range
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x60200000, 0x40200000, 0x64200000) specified in the ranges property for
I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes:
e53bdfc00977 ("arm64: dts: qcom: sm8250: Add PCIe support")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-9-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Tue, 28 Feb 2023 16:47:43 +0000 (22:17 +0530)]
arm64: dts: qcom: msm8996: Fix the PCI I/O port range
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x0c200000, 0x0d200000, 0x0e200000) specified in the ranges property for
I/O region.
While at it, let's also align the entries.
Fixes:
ed965ef89227 ("arm64: dts: qcom: msm8996: add support to pcie")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-8-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Tue, 28 Feb 2023 16:47:42 +0000 (22:17 +0530)]
arm64: dts: qcom: ipq6018: Fix the PCI I/O port range
For 64KiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x10000. Hence, fix the bogus PCI address
(0x20200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes:
095bbdd9a5c3 ("arm64: dts: qcom: ipq6018: Add pcie support")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-7-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Tue, 28 Feb 2023 16:47:41 +0000 (22:17 +0530)]
arm64: dts: qcom: ipq8074: Fix the PCI I/O port range
For 64KiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x10000. Hence, fix the bogus PCI addresses
(0x10200000, 0x20200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses and align
them in a single line.
Fixes:
33057e1672fe ("ARM: dts: ipq8074: Add pcie nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-6-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Tue, 28 Feb 2023 16:47:40 +0000 (22:17 +0530)]
arm64: dts: qcom: sm8550: Fix the PCI I/O port range
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x60200000, 0x40200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes:
7d1158c984d3 ("arm64: dts: qcom: sm8550: Add PCIe PHYs and controllers nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-5-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Tue, 28 Feb 2023 16:47:39 +0000 (22:17 +0530)]
arm64: dts: qcom: sc7280: Fix the PCI I/O port range
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI address
(0x40200000) specified in the ranges property for I/O region.
Fixes:
92e0ee9f83b3 ("arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-4-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Tue, 28 Feb 2023 16:47:38 +0000 (22:17 +0530)]
arm64: dts: qcom: msm8998: Fix the PCI I/O port range
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI address
(0x1b200000) specified in the ranges property for I/O region.
Fixes:
b84dfd175c09 ("arm64: dts: qcom: msm8998: Add PCIe PHY and RC nodes")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-3-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Tue, 28 Feb 2023 16:47:37 +0000 (22:17 +0530)]
arm64: dts: qcom: sdm845: Fix the PCI I/O port range
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x60200000, 0x40200000) specified in the ranges property for I/O region.
While at it, let's use the missing 0x prefix for the addresses.
Fixes:
42ad231338c1 ("arm64: dts: qcom: sdm845: Add second PCIe PHY and controller")
Fixes:
5c538e09cb19 ("arm64: dts: qcom: sdm845: Add first PCIe controller and PHY")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230228164752.55682-2-manivannan.sadhasivam@linaro.org
Konrad Dybcio [Fri, 24 Feb 2023 13:07:58 +0000 (14:07 +0100)]
arm64: dts: qcom: sc8280xp: Use correct CPU compatibles
Cores 0-3 are CA78C r0p0, cores 4-7 are CX1C r0p0. Use the correct
compatibles instead of the placeholder qcom,kryo.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230224130759.45579-2-konrad.dybcio@linaro.org
Mao Jinlong [Tue, 17 Jan 2023 14:57:08 +0000 (06:57 -0800)]
arm64: dts: qcom: sm8250: Add tpdm mm/prng
Add tpdm mm and tpdm prng for sm8250.
+---------------+ +-------------+
| tpdm@6c08000 | |tpdm@684C000 |
+-------|-------+ +------|------+
| |
+-------|-------+ |
| funnel@6c0b000| |
+-------|-------+ |
| |
+-------|-------+ |
|funnel@6c2d000 | |
+-------|-------+ |
| |
| +---------------+ |
+----- tpda@6004000 -----------+
+-------|-------+
|
+-------|-------+
|funnel@6005000 |
+---------------+
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117145708.16739-10-quic_jinlmao@quicinc.com
Vincent Guittot [Fri, 6 Jan 2023 16:46:18 +0000 (17:46 +0100)]
arm64: dts: qcom: sdm845: correct dynamic power coefficients
While stressing EAS on my dragonboard RB3, I have noticed that LITTLE cores
where never selected as the most energy efficient CPU whatever the
utilization level of waking task.
energy model framework uses its cost field to estimate the energy with
the formula:
nrg = cost of the selected OPP * utilization / CPU's max capacity
which ends up selecting the CPU with lowest cost / max capacity ration
as long as the utilization fits in the OPP's capacity.
If we compare the cost of a little OPP with similar capacity of a big OPP
like :
OPP(kHz) OPP capacity cost max capacity cost/max capacity
LITTLE 1766400 407 351114 407 863
big 1056000 408 520267 1024 508
This can be interpreted as the LITTLE core consumes 70% more than big core
for the same compute capacity.
According to [1], LITTLE consumes 10% less than big core for Coremark
benchmark at those OPPs. If we consider that everything else stays
unchanged, the dynamic-power-coefficient of LITTLE core should be
only 53% of the current value: 290 * 53% = 154
Set the dynamic-power-coefficient of CPU0-3 to 154 to fix the energy model.
[1] https://github.com/kdrag0n/freqbench/tree/master/results/sdm845/main
Fixes:
0e0a8e35d725 ("arm64: dts: qcom: sdm845: correct dynamic power coefficients")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106164618.1845281-1-vincent.guittot@linaro.org
Kathiravan T [Fri, 10 Feb 2023 06:04:01 +0000 (11:34 +0530)]
arm64: dts: qcom: ipq5332: add SMEM support
Add SMEM support by adding required nodes.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230210060401.24383-3-quic_kathirav@quicinc.com
Kathiravan T [Fri, 10 Feb 2023 06:04:00 +0000 (11:34 +0530)]
arm64: dts: qcom: ipq5332: enable the download mode support
Enable the support for download mode to collect the RAM dumps if
system crashes, to perform the post mortem analysis.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230210060401.24383-2-quic_kathirav@quicinc.com
Kathiravan T [Tue, 7 Mar 2023 06:22:31 +0000 (11:52 +0530)]
arm64: dts: qcom: add IPQ5332 SoC and MI01.2 board support
Add initial device tree support for the Qualcomm IPQ5332 SoC and
MI01.2 board.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230307062232.4889-9-quic_kathirav@quicinc.com
Krzysztof Kozlowski [Wed, 8 Mar 2023 12:59:06 +0000 (13:59 +0100)]
arm64: dts: qcom: msm8996-oneplus: do not enable incomplete nodes
status=okay should appear in final place where all required properties
are provided, because that makes the code the easiest to read. Move the
status from common OnePlus DTSI to board DTS. No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308125906.236885-11-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 8 Mar 2023 12:59:05 +0000 (13:59 +0100)]
arm64: dts: qcom: sc7280: fix EUD port properties
Nodes with unit addresses must have also 'reg' property:
sc7280-herobrine-crd.dtb: eud@88e0000: ports:port@0: 'reg' is a required property
Fixes:
0b059979090d ("arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308125906.236885-10-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 8 Mar 2023 12:59:04 +0000 (13:59 +0100)]
arm64: dts: qcom: msm8994: correct RPMCC node name
The bindings expect RPM clock controller subnode to be named
'clock-controller':
apq8094-sony-xperia-kitakami-karin_windy.dtb: smd: rpm:rpm-requests: 'rpmcc' does not match any of the regexes: '^regulators(-[01])?$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308125906.236885-9-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 8 Mar 2023 12:59:03 +0000 (13:59 +0100)]
arm64: dts: qcom: msm8953: drop clocks from RPMPD
The RPM power domain controller does not take XO clock as input
(according to bindings and Linux driver):
msm8953-xiaomi-vince.dtb: rpm-requests: power-controller: 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308125906.236885-8-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 8 Mar 2023 12:59:02 +0000 (13:59 +0100)]
arm64: dts: qcom: msm8953: correct RPMCC node name
The bindings expect RPM clock controller subnode to be named
'clock-controller':
msm8953-motorola-potter.dtb: smd: rpm:rpm-requests: 'rpmcc' does not match any of the regexes: '^regulators(-[01])?$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308125906.236885-7-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 8 Mar 2023 12:59:01 +0000 (13:59 +0100)]
arm64: dts: qcom: ipq6018-cp01-c1: drop SPI cs-select
The SPI controller nodes do not use/allow cs-select property:
ipq6018-cp01-c1.dtb: spi@78b5000: Unevaluated properties are not allowed ('cs-select' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308125906.236885-6-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 8 Mar 2023 12:59:00 +0000 (13:59 +0100)]
arm64: dts: qcom: apq8096-db820c: drop SPI label
The SPI controller nodes do not use/allow label property:
apq8096-db820c.dtb: spi@7575000: Unevaluated properties are not allowed ('label' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308125906.236885-5-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 8 Mar 2023 12:58:59 +0000 (13:58 +0100)]
arm64: dts: qcom: sdm845-db845c: drop SPI label
The SPI controller nodes do not use/allow label property:
sdm845-db845c.dtb: spi@888000: Unevaluated properties are not allowed ('label' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308125906.236885-4-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 8 Mar 2023 12:58:58 +0000 (13:58 +0100)]
arm64: dts: qcom: qdu1000: drop incorrect serial properties
The serial node does not use/allow address/size cells:
qdu1000-idp.dtb: geniqup@9c0000: serial@99c000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected)
Fixes:
6bd20c54b589 ("arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308125906.236885-3-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 8 Mar 2023 12:58:57 +0000 (13:58 +0100)]
arm64: dts: qcom: sm8250: drop incorrect Coresight funnel properties
There is only one output port, thus out-ports should not have
'address/size-cells' and unit addresses. 'reg-names' are also not
allowed by bindings.
qrb5165-rb5.dtb: funnel@6042000: out-ports: '#address-cells', '#size-cells', 'port@0' do not match any of the regexes: 'pinctrl-[0-9]+'
qrb5165-rb5.dtb: funnel@6b04000: Unevaluated properties are not allowed ('reg-names' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308125906.236885-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Wed, 8 Mar 2023 12:58:56 +0000 (13:58 +0100)]
arm64: dts: qcom: drop incorrect cell-index from SPMI
The SPMI controller (PMIC Arbiter)) does not use nor allow 'cell-index'
property:
sm8150-microsoft-surface-duo.dtb: spmi@c440000: Unevaluated properties are not allowed ('cell-index' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308125906.236885-1-krzysztof.kozlowski@linaro.org
Bartosz Golaszewski [Wed, 15 Mar 2023 20:27:51 +0000 (21:27 +0100)]
arm64: dts: qcom: sm8150: fix the uart9 label
There's a typo in the @<address> part of the uart9 label. Fix it.
Fixes:
10d900a834da ("arm64: dts: sm8150: add the QUPv3 high-speed UART node")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230315202751.1518543-1-brgl@bgdev.pl
Manivannan Sadhasivam [Tue, 14 Mar 2023 08:04:40 +0000 (13:34 +0530)]
arm64: dts: qcom: sm6350: Fix the base addresses of LLCC banks
The LLCC block has several banks each with a different base address
and holes in between. So it is not a correct approach to cover these
banks with a single offset/size. Instead, the individual bank's base
address needs to be specified in devicetree with the exact size.
On SM6350, there is only one LLCC bank available. So let's just pass that
as "llcc0_base".
Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-12-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Tue, 14 Mar 2023 08:04:39 +0000 (13:34 +0530)]
arm64: dts: qcom: sm8450: Fix the base addresses of LLCC banks
The LLCC block has several banks each with a different base address
and holes in between. So it is not a correct approach to cover these
banks with a single offset/size. Instead, the individual bank's base
address needs to be specified in devicetree with the exact size.
Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-11-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Tue, 14 Mar 2023 08:04:38 +0000 (13:34 +0530)]
arm64: dts: qcom: sm8350: Fix the base addresses of LLCC banks
The LLCC block has several banks each with a different base address
and holes in between. So it is not a correct approach to cover these
banks with a single offset/size. Instead, the individual bank's base
address needs to be specified in devicetree with the exact size.
Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-10-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Tue, 14 Mar 2023 08:04:37 +0000 (13:34 +0530)]
arm64: dts: qcom: sm8250: Fix the base addresses of LLCC banks
The LLCC block has several banks each with a different base address
and holes in between. So it is not a correct approach to cover these
banks with a single offset/size. Instead, the individual bank's base
address needs to be specified in devicetree with the exact size.
Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-9-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Tue, 14 Mar 2023 08:04:36 +0000 (13:34 +0530)]
arm64: dts: qcom: sm8150: Fix the base addresses of LLCC banks
The LLCC block has several banks each with a different base address
and holes in between. So it is not a correct approach to cover these
banks with a single offset/size. Instead, the individual bank's base
address needs to be specified in devicetree with the exact size.
Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-8-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Tue, 14 Mar 2023 08:04:35 +0000 (13:34 +0530)]
arm64: dts: qcom: sc8280xp: Fix the base addresses of LLCC banks
The LLCC block has several banks each with a different base address
and holes in between. So it is not a correct approach to cover these
banks with a single offset/size. Instead, the individual bank's base
address needs to be specified in devicetree with the exact size.
Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-7-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Tue, 14 Mar 2023 08:04:34 +0000 (13:34 +0530)]
arm64: dts: qcom: sc7280: Fix the base addresses of LLCC banks
The LLCC block has several banks each with a different base address
and holes in between. So it is not a correct approach to cover these
banks with a single offset/size. Instead, the individual bank's base
address needs to be specified in devicetree with the exact size.
While at it, let's also fix the size of the llcc_broadcast_base to cover
the whole region.
Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-6-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Tue, 14 Mar 2023 08:04:33 +0000 (13:34 +0530)]
arm64: dts: qcom: sc7180: Fix the base addresses of LLCC banks
The LLCC block has several banks each with a different base address
and holes in between. So it is not a correct approach to cover these
banks with a single offset/size. Instead, the individual bank's base
address needs to be specified in devicetree with the exact size.
On SC7180, there is only one LLCC bank available. So let's just pass that
as "llcc0_base".
Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-5-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Tue, 14 Mar 2023 08:04:32 +0000 (13:34 +0530)]
arm64: dts: qcom: sdm845: Fix the base addresses of LLCC banks
The LLCC block has several banks each with a different base address
and holes in between. So it is not a correct approach to cover these
banks with a single offset/size. Instead, the individual bank's base
address needs to be specified in devicetree with the exact size.
On SDM845, the size of the LLCC bank 0 needs to be reduced to 0x4500 as
there are LLCC BWMON registers located after this range.
Reported-by: Parikshit Pareek <quic_ppareek@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230314080443.64635-4-manivannan.sadhasivam@linaro.org
Konrad Dybcio [Thu, 2 Mar 2023 01:18:49 +0000 (02:18 +0100)]
arm64: dts: qcom: msm8996: Add missing DWC3 quirks
Add missing dwc3 quirks from msm-3.18. Unfortunately, none of them
make `dwc3-qcom 6af8800.usb: HS-PHY not in L2` go away.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230302011849.1873056-1-konrad.dybcio@linaro.org
Mukesh Ojha [Wed, 22 Feb 2023 15:30:45 +0000 (21:00 +0530)]
arm64: dts: qcom: sm8450: Add IMEM and PIL info region
Add a simple-mfd representing IMEM on SM8450 and define the PIL
relocation info region, so that post mortem tools will be able
to locate the loaded remoteprocs.
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1677079845-17650-1-git-send-email-quic_mojha@quicinc.com
Bartosz Golaszewski [Tue, 21 Feb 2023 15:05:43 +0000 (16:05 +0100)]
arm64: dts: qcom: sa8775p: add cpufreq node
Add a node for the cpufreq engine and specify the frequency domains for
all CPUs.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230221150543.283487-3-brgl@bgdev.pl
Krzysztof Kozlowski [Mon, 20 Feb 2023 09:43:39 +0000 (10:43 +0100)]
arm64: dts: qcom: apq8096-db820c: fix indentation
Correct indentation.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230220094339.47370-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Mon, 20 Feb 2023 09:43:38 +0000 (10:43 +0100)]
arm64: dts: qcom: msm8996: move WCD9335 audio codec to boards
The WCD9335 audio codec on Slimbus is a property of a board, not SoC,
thus it should not be present in MSM8996 DTSI. Keep it in specific
boards, so it won't appear incomplete in the boards not having it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230220094339.47370-1-krzysztof.kozlowski@linaro.org
Konrad Dybcio [Thu, 16 Feb 2023 14:56:46 +0000 (15:56 +0100)]
arm64: dts: qcom: sm8350: Add qcom,smmu-500 to Adreno SMMU
Add the fallback Qualcomm SMMU500 compatible to the Adreno SMMU.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230216145646.4095336-5-konrad.dybcio@linaro.org
Konrad Dybcio [Thu, 16 Feb 2023 14:56:45 +0000 (15:56 +0100)]
arm64: dts: qcom: sm8250: Add qcom,smmu-500 to Adreno SMMU
Add the fallback Qualcomm SMMU500 compatible to the Adreno SMMU.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230216145646.4095336-4-konrad.dybcio@linaro.org
Konrad Dybcio [Thu, 16 Feb 2023 14:56:44 +0000 (15:56 +0100)]
arm64: dts: qcom: sm8150: Add qcom,smmu-500 to Adreno SMMU
Add the fallback Qualcomm SMMU500 compatible to the Adreno SMMU.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230216145646.4095336-3-konrad.dybcio@linaro.org
Konrad Dybcio [Thu, 16 Feb 2023 14:56:43 +0000 (15:56 +0100)]
arm64: dts: qcom: sc7280: Add qcom,smmu-500 to Adreno SMMU
Add the fallback Qualcomm SMMU500 compatible to the Adreno SMMU.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230216145646.4095336-2-konrad.dybcio@linaro.org
Manivannan Sadhasivam [Wed, 15 Feb 2023 07:04:00 +0000 (12:34 +0530)]
arm64: dts: qcom: sm6115: Supply clock from cpufreq node to CPUs
Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
to the CPU cores. But this relationship is not represented in DTS so far.
So let's make cpufreq node as the clock provider and CPU nodes as the
consumers. The clock index for each CPU node is based on the frequency
domain index.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230215070400.5901-13-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Wed, 15 Feb 2023 07:03:59 +0000 (12:33 +0530)]
arm64: dts: qcom: sm6375: Supply clock from cpufreq node to CPUs
Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
to the CPU cores. But this relationship is not represented in DTS so far.
So let's make cpufreq node as the clock provider and CPU nodes as the
consumers. The clock index for each CPU node is based on the frequency
domain index.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230215070400.5901-12-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Wed, 15 Feb 2023 07:03:58 +0000 (12:33 +0530)]
arm64: dts: qcom: sc8280xp: Supply clock from cpufreq node to CPUs
Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
to the CPU cores. But this relationship is not represented in DTS so far.
So let's make cpufreq node as the clock provider and CPU nodes as the
consumers. The clock index for each CPU node is based on the frequency
domain index.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230215070400.5901-11-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Wed, 15 Feb 2023 07:03:57 +0000 (12:33 +0530)]
arm64: dts: qcom: sm8350: Supply clock from cpufreq node to CPUs
Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
to the CPU cores. But this relationship is not represented in DTS so far.
So let's make cpufreq node as the clock provider and CPU nodes as the
consumers. The clock index for each CPU node is based on the frequency
domain index.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230215070400.5901-10-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Wed, 15 Feb 2023 07:03:56 +0000 (12:33 +0530)]
arm64: dts: qcom: sm8150: Supply clock from cpufreq node to CPUs
Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
to the CPU cores. But this relationship is not represented in DTS so far.
So let's make cpufreq node as the clock provider and CPU nodes as the
consumers. The clock index for each CPU node is based on the frequency
domain index.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230215070400.5901-9-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Wed, 15 Feb 2023 07:03:55 +0000 (12:33 +0530)]
arm64: dts: qcom: sc7180: Supply clock from cpufreq node to CPUs
Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
to the CPU cores. But this relationship is not represented in DTS so far.
So let's make cpufreq node as the clock provider and CPU nodes as the
consumers. The clock index for each CPU node is based on the frequency
domain index.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230215070400.5901-8-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Wed, 15 Feb 2023 07:03:54 +0000 (12:33 +0530)]
arm64: dts: qcom: qdu1000: Supply clock from cpufreq node to CPUs
Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
to the CPU cores. But this relationship is not represented in DTS so far.
So let's make cpufreq node as the clock provider and CPU nodes as the
consumers. The clock index for each CPU node is based on the frequency
domain index.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230215070400.5901-7-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Wed, 15 Feb 2023 07:03:53 +0000 (12:33 +0530)]
arm64: dts: qcom: sm8250: Supply clock from cpufreq node to CPUs
Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
to the CPU cores. But this relationship is not represented in DTS so far.
So let's make cpufreq node as the clock provider and CPU nodes as the
consumers. The clock index for each CPU node is based on the frequency
domain index.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230215070400.5901-6-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Wed, 15 Feb 2023 07:03:52 +0000 (12:33 +0530)]
arm64: dts: qcom: sm8550: Supply clock from cpufreq node to CPUs
Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
to the CPU cores. But this relationship is not represented in DTS so far.
So let's make cpufreq node as the clock provider and CPU nodes as the
consumers. The clock index for each CPU node is based on the frequency
domain index.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230215070400.5901-5-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Wed, 15 Feb 2023 07:03:51 +0000 (12:33 +0530)]
arm64: dts: qcom: sm6350: Supply clock from cpufreq node to CPUs
Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
to the CPU cores. But this relationship is not represented in DTS so far.
So let's make cpufreq node as the clock provider and CPU nodes as the
consumers. The clock index for each CPU node is based on the frequency
domain index.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230215070400.5901-4-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Wed, 15 Feb 2023 07:03:50 +0000 (12:33 +0530)]
arm64: dts: qcom: sc7280: Supply clock from cpufreq node to CPUs
Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
to the CPU cores. But this relationship is not represented in DTS so far.
So let's make cpufreq node as the clock provider and CPU nodes as the
consumers. The clock index for each CPU node is based on the frequency
domain index.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230215070400.5901-3-manivannan.sadhasivam@linaro.org
Manivannan Sadhasivam [Wed, 15 Feb 2023 07:03:49 +0000 (12:33 +0530)]
arm64: dts: qcom: sdm845: Supply clock from cpufreq node to CPUs
Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks
to the CPU cores. But this relationship is not represented in DTS so far.
So let's make cpufreq node as the clock provider and CPU nodes as the
consumers. The clock index for each CPU node is based on the frequency
domain index.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230215070400.5901-2-manivannan.sadhasivam@linaro.org
Bartosz Golaszewski [Tue, 14 Feb 2023 09:27:13 +0000 (10:27 +0100)]
arm64: dts: qcom: add initial support for qcom sa8775p-ride
This adds basic support for the Qualcomm sa8775p platform and the
reference board: sa8775p-ride. The dt files describe the basics of the
SoC and enable booting to shell.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230214092713.211054-3-brgl@bgdev.pl
Konrad Dybcio [Tue, 14 Feb 2023 09:08:49 +0000 (10:08 +0100)]
arm64: dts: qcom: pm8998: Add a specific compatible for coincell chg
Add a PM8998-specific compatible to the coincell charger and keep the
PM8941 one as fallback.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230214090849.2186370-3-konrad.dybcio@linaro.org
Konrad Dybcio [Mon, 13 Feb 2023 21:03:31 +0000 (22:03 +0100)]
arm64: dts: qcom: msm8998: Fix stm-stimulus-base reg name
The name stm-data-base comes from ancient (msm-3.10 or older)
downstream kernels. Upstream uses stm-stimulus-base instead. Fix it.
Fixes:
783abfa2249a ("arm64: dts: qcom: msm8998: Add Coresight support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213210331.2106877-1-konrad.dybcio@linaro.org
Konrad Dybcio [Mon, 13 Feb 2023 17:59:28 +0000 (18:59 +0100)]
arm64: dts: qcom: sm6375: Add RMTFS
Add a node for RMTFS on SM6375.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230213175928.1979637-1-konrad.dybcio@linaro.org
Krzysztof Kozlowski [Fri, 10 Feb 2023 16:38:44 +0000 (17:38 +0100)]
arm64: dts: qcom: sm8550-qrd: add QRD8550
Add a minimal DTS for the new QRD8550 board - a mobile-like development
board with SM8550. Serial, UFS and USB should be working.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230210163844.765074-2-krzysztof.kozlowski@linaro.org
Abel Vesa [Wed, 8 Feb 2023 19:02:00 +0000 (21:02 +0200)]
arm64: dts: qcom: sm8550-mtp: Add eUSB2 repeater node
Add the PMIC eUSB2 repeater node and add the usb-repeater
property to the eUSB2 PHY to allow it to be controlled by the
PHY driver.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208190200.2966723-8-abel.vesa@linaro.org
Neil Armstrong [Wed, 8 Feb 2023 19:01:59 +0000 (21:01 +0200)]
arm64: dts: qcom: pm8550b: Add eUSB2 repeater node
Add nodes for the eUSB2 repeater found on the pm8550b SPMI PMIC.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208190200.2966723-7-abel.vesa@linaro.org
Abel Vesa [Wed, 8 Feb 2023 18:00:20 +0000 (20:00 +0200)]
arm64: dts: qcom: sm8550: Fix PCIe PHYs and controllers nodes
First, move the pinctrl related propeties out from SoC dtsi and into the
board dts and add blank lines before status properties in the PHY nodes
to be consistent with the rest of the nodes. Then drop the pipe clock
from the controller nodes. Rename the aggre0 and aggre1 clocks to more
generic noc_aggr, and then the cnoc_pcie_sf_axi to cnoc_sf_axi. Add the
cpu-pcie interconnects to both controller nodes. Rename the pcie1 second
reset to link_down and drop the unnecessary enable-gpios. Switch the aux
clock to GCC_PCIE_1_PHY_AUX_CLK for the pcie1 PHY and drop the aux_phy
from clock-names. Also rename the nocsr reset to phy_nocsr. With this
changes we are now in line with the SC8280XP bindings.
Fixes:
7d1158c984d3 ("arm64: dts: qcom: sm8550: Add PCIe PHYs and controllers nodes")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208180020.2761766-12-abel.vesa@linaro.org
Johan Hovold [Thu, 2 Feb 2023 15:54:48 +0000 (16:54 +0100)]
arm64: dts: qcom: sc8280xp-x13s: enable rtc
The Lenovo X13s firmware does not implement the UEFI time runtime
services so the RTC in the PM8280K PMIC needs to be accessed directly.
To complicate things further, the RTC control and time registers are
read-only on this platform so an offset must be stored in some other
machine-specific non-volatile memory which an RTC driver can take into
account when reading or updating the time.
The UEFI firmware (and Windows) use a UEFI variable for this:
882f8c2b-9646-435f-8de5-
f208ff80c1bd-RTCInfo
but the offset can only be accessed via the Qualcomm UEFI Secure
Application residing in the TEE as the firmware does not implement the
variable runtime services either.
While it is possible to access this UEFI variable from Linux on the
X13s, this requires using a fairly complex and reverse-engineered
firmware interface. As the only benefit of doing so is to make sure that
the UEFI (Windows) and Linux time never gets out of sync, it seems
preferable to use the PMIC scratch registers for storing an offset
instead. This also avoids flash wear in case of RTC drift, etc.
So instead of using the UEFI RTC offset, reserve four bytes in one of
the PMIC SDAM scratch-register blocks to hold the RTC offset.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230202155448.6715-23-johan+linaro@kernel.org
Johan Hovold [Thu, 2 Feb 2023 15:54:47 +0000 (16:54 +0100)]
arm64: dts: qcom: sc8280xp-crd: enable rtc
The SC8280XP CRD firmware does not implement the UEFI time runtime
services so the RTC in the PM8280K PMIC needs to be accessed directly.
To complicate things further, the RTC control and time registers are
read-only on this platform so an offset must be stored in some other
machine-specific non-volatile memory which an RTC driver can take into
account when reading or updating the time.
The UEFI firmware (and Windows) use a UEFI variable for this:
882f8c2b-9646-435f-8de5-
f208ff80c1bd-RTCInfo
but the offset can only be accessed via the Qualcomm UEFI Secure
Application residing in the TEE as the firmware does not implement the
variable runtime services either.
While it is possible to access this UEFI variable from Linux on the CRD,
this requires using a fairly complex and reverse-engineered firmware
interface. As the only benefit of doing so is to make sure that the UEFI
(Windows) and Linux time never gets out of sync, it seems preferable to
use the PMIC scratch registers for storing an offset instead. This also
avoids flash wear in case of RTC drift, etc.
Also note that setting variables using this interface does not work on
at least one CRD for reasons not yet known.
So instead of using the UEFI RTC offset, reserve four bytes in one of
the PMIC SDAM scratch-register blocks to hold the RTC offset.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230202155448.6715-22-johan+linaro@kernel.org
Johan Hovold [Thu, 2 Feb 2023 15:54:46 +0000 (16:54 +0100)]
arm64: dts: qcom: sc8280xp-pmics: add pmk8280 sdam nvram
Add one of the PMK8280 SDAM blocks which can be used to store an RTC
offset.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230202155448.6715-21-johan+linaro@kernel.org
Johan Hovold [Thu, 2 Feb 2023 15:54:45 +0000 (16:54 +0100)]
arm64: dts: qcom: sc8280xp-pmics: add pmk8280 rtc
The PMK8280 has an RTC which can also be used as a wakeup source.
Note that the RTC can not be disabled and updating the time is not
permitted either. Instead an offset can be stored in some other machine-
specific non-volatile memory which a driver can take into account.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230202155448.6715-20-johan+linaro@kernel.org
Richard Acayan [Wed, 1 Feb 2023 01:00:20 +0000 (20:00 -0500)]
arm64: dts: qcom: sdm670: add opps for peripherals
The interconnects are now in place. Add Operating Performance Points for
them to allow the kernel to properly manage them.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230201010020.84586-3-mailingradian@gmail.com
Bhupesh Sharma [Sat, 28 Jan 2023 05:42:56 +0000 (11:12 +0530)]
arm64: dts: qcom: sm6115: Add remoteproc nodes
Add the adsp, cdsp and modem remoteproc nodes to sm6115.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
[bjorn: Extended regs to match #address/size-cells to 2]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230128054256.2100501-1-bhupesh.sharma@linaro.org
Bartosz Golaszewski [Thu, 9 Mar 2023 14:35:51 +0000 (15:35 +0100)]
arm64: dts: qcom: sa8155p-adp: enable the GNSS high-speed UART
Enable the high-speed UART port that's connected to the GNSS controller
on the board.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309143551.200694-3-brgl@bgdev.pl
Bartosz Golaszewski [Thu, 9 Mar 2023 14:35:50 +0000 (15:35 +0100)]
arm64: dts: sm8150: add the QUPv3 high-speed UART node
Add the high-speed UART node to the dtsi for sm8150.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230309143551.200694-2-brgl@bgdev.pl
Linus Torvalds [Sun, 5 Mar 2023 22:52:03 +0000 (14:52 -0800)]
Linux 6.3-rc1
Linus Torvalds [Sat, 4 Mar 2023 21:35:43 +0000 (13:35 -0800)]
cpumask: re-introduce constant-sized cpumask optimizations
Commit
aa47a7c215e7 ("lib/cpumask: deprecate nr_cpumask_bits") resulted
in the cpumask operations potentially becoming hugely less efficient,
because suddenly the cpumask was always considered to be variable-sized.
The optimization was then later added back in a limited form by commit
6f9c07be9d02 ("lib/cpumask: add FORCE_NR_CPUS config option"), but that
FORCE_NR_CPUS option is not useful in a generic kernel and more of a
special case for embedded situations with fixed hardware.
Instead, just re-introduce the optimization, with some changes.
Instead of depending on CPUMASK_OFFSTACK being false, and then always
using the full constant cpumask width, this introduces three different
cpumask "sizes":
- the exact size (nr_cpumask_bits) remains identical to nr_cpu_ids.
This is used for situations where we should use the exact size.
- the "small" size (small_cpumask_bits) is the NR_CPUS constant if it
fits in a single word and the bitmap operations thus end up able
to trigger the "small_const_nbits()" optimizations.
This is used for the operations that have optimized single-word
cases that get inlined, notably the bit find and scanning functions.
- the "large" size (large_cpumask_bits) is the NR_CPUS constant if it
is an sufficiently small constant that makes simple "copy" and
"clear" operations more efficient.
This is arbitrarily set at four words or less.
As a an example of this situation, without this fixed size optimization,
cpumask_clear() will generate code like
movl nr_cpu_ids(%rip), %edx
addq $63, %rdx
shrq $3, %rdx
andl $-8, %edx
callq memset@PLT
on x86-64, because it would calculate the "exact" number of longwords
that need to be cleared.
In contrast, with this patch, using a MAX_CPU of 64 (which is quite a
reasonable value to use), the above becomes a single
movq $0,cpumask
instruction instead, because instead of caring to figure out exactly how
many CPU's the system has, it just knows that the cpumask will be a
single word and can just clear it all.
Note that this does end up tightening the rules a bit from the original
version in another way: operations that set bits in the cpumask are now
limited to the actual nr_cpu_ids limit, whereas we used to do the
nr_cpumask_bits thing almost everywhere in the cpumask code.
But if you just clear bits, or scan for bits, we can use the simpler
compile-time constants.
In the process, remove 'cpumask_complement()' and 'for_each_cpu_not()'
which were not useful, and which fundamentally have to be limited to
'nr_cpu_ids'. Better remove them now than have somebody introduce use
of them later.
Of course, on x86-64 with MAXSMP there is no sane small compile-time
constant for the cpumask sizes, and we end up using the actual CPU bits,
and will generate the above kind of horrors regardless. Please don't
use MAXSMP unless you really expect to have machines with thousands of
cores.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 5 Mar 2023 19:32:30 +0000 (11:32 -0800)]
Merge tag 'v6.3-p2' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix a regression in the caam driver"
* tag 'v6.3-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: caam - Fix edesc/iv ordering mixup
Linus Torvalds [Sun, 5 Mar 2023 19:27:48 +0000 (11:27 -0800)]
Merge tag 'x86-urgent-2023-03-05' of git://git./linux/kernel/git/tip/tip
Pull x86 updates from Thomas Gleixner:
"A small set of updates for x86:
- Return -EIO instead of success when the certificate buffer for SEV
guests is not large enough
- Allow STIPB to be enabled with legacy IBSR. Legacy IBRS is cleared
on return to userspace for performance reasons, but the leaves user
space vulnerable to cross-thread attacks which STIBP prevents.
Update the documentation accordingly"
* tag 'x86-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt/sev-guest: Return -EIO if certificate buffer is not large enough
Documentation/hw-vuln: Document the interaction between IBRS and STIBP
x86/speculation: Allow enabling STIBP with legacy IBRS
Linus Torvalds [Sun, 5 Mar 2023 19:19:16 +0000 (11:19 -0800)]
Merge tag 'irq-urgent-2023-03-05' of git://git./linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"A set of updates for the interrupt susbsystem:
- Prevent possible NULL pointer derefences in
irq_data_get_affinity_mask() and irq_domain_create_hierarchy()
- Take the per device MSI lock before invoking code which relies on
it being hold
- Make sure that MSI descriptors are unreferenced before freeing
them. This was overlooked when the platform MSI code was converted
to use core infrastructure and results in a fals positive warning
- Remove dead code in the MSI subsystem
- Clarify the documentation for pci_msix_free_irq()
- More kobj_type constification"
* tag 'irq-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi, platform-msi: Ensure that MSI descriptors are unreferenced
genirq/msi: Drop dead domain name assignment
irqdomain: Add missing NULL pointer check in irq_domain_create_hierarchy()
genirq/irqdesc: Make kobj_type structures constant
PCI/MSI: Clarify usage of pci_msix_free_irq()
genirq/msi: Take the per-device MSI lock before validating the control structure
genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask()