arm64: dts: ti: k3-am64-sk: Fixup reference to phandles array

When referring to array of phandles, using <> to separate the array
entries is better notation as it makes potential errors with phandle and
cell arguments easier to catch. Fix the outliers to be consistent with
the rest of the usage.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230606182220.3661956-12-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am64-evm: Fixup reference to phandles array

When referring to array of phandles, using <> to separate the array
entries is better notation as it makes potential errors with phandle and
cell arguments easier to catch. Fix the outliers to be consistent with
the rest of the usage.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230606182220.3661956-11-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am625-sk: Fixup reference to phandles array

When referring to array of phandles, using <> to separate the array
entries is better notation as it makes potential errors with phandle and
cell arguments easier to catch. Fix the outliers to be consistent with
the rest of the usage.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230606182220.3661956-10-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721s2-common-proc-board: Fixup reference to phandles array

When referring to array of phandles, using <> to separate the array
entries is better notation as it makes potential errors with phandle
and cell arguments easier to catch. Fix the outliers to be consistent
with the rest of the usage.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230606182220.3661956-9-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j7200-som/common-proc-board: Fixup reference to phandles array

When referring to array of phandles, using <> to separate the array
entries is better notation as it makes potential errors with phandle
and cell arguments easier to catch. Fix the outliers to be consistent
with the rest of the usage.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230606182220.3661956-8-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am642-phyboard-electra-rdk: Fixup reference to phandles array

When referring to array of phandles, using <> to separate the array
entries is better notation as it makes potential errors with phandle
and cell arguments easier to catch. Fix the outliers to be consistent
with the rest of the usage.

Cc: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230606182220.3661956-7-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721e-beagleboneai64: Fixup reference to phandles array

When referring to array of phandles, using <> to separate the array
entries is better notation as it makes potential errors with phandle and
cell arguments easier to catch. Fix the outliers to be consistent with
the rest of the usage.

Cc: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230606182220.3661956-6-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721e-beagleboneai64: Move eeprom WP gpio pinctrl to eeprom node

Move the eeprom WP GPIO mux configuration to be part of the eeprom node
instead of the I2C node.

Cc: Robert Nelson <robertcnelson@gmail.com>
Suggested-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230606182220.3661956-5-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721e-beagleboneai64: Move camera gpio pinctrl to gpio node

Move the GPIO mux configuration needed for camera module to work to the
GPIO node instead of the I2C node.

Camera nodes are maintained as overlay files, but the common mux is
always needed to ensure that camera probes fine and ensuring the mux
is configured as part of the GPIO module allows for the multiple
overlay files to be simpler.

Cc: Robert Nelson <robertcnelson@gmail.com>
Suggested-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230606182220.3661956-4-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721e-som-p0/common-proc-board: Fixup reference to phandles array

When referring to array of phandles, using <> to separate the array
entries is better notation as it makes potential errors with phandle and
cell arguments easier to catch. Fix the outliers to be consistent with
the rest of the usage.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230606182220.3661956-3-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721e-sk: Fixup reference to phandles array

When referring to array of phandles, using <> to separate the array
entries is better notation as it makes potential errors with phandle and
cell arguments easier to catch. Fix the outliers to be consistent with
the rest of the usage.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230606182220.3661956-2-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j784s4: Configure pinctrl for timer IO

There are timer IO pads in the MCU domain, and in the MAIN domain.
These pads can be muxed for the related timers.

The details of the multiplexing can be found in the register
documentation and Technical Reference Manual[1].

These are similar to J721e/J7200, but have different mux capabilities.

[1] http://www.ti.com/lit/zip/spruj52

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230531213215.602395-7-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j784s4: Add general purpose timers

There are 20 general purpose timers on j784s4 that can be used for
things like PWM using pwm-omap-dmtimer driver. There are also
additional ten timers in the MCU domain which are meant for MCU
firmware usage and hence marked reserved by default.

Though the count is similar to J721e/J7200/j721s2, the device IDs
and clocks used in j784s4 are different with the option of certain
clocks having options of additional clock muxes. Since there is very
minimal reuse, it is cleaner to integrate as part of SoC files itself.
The defaults are configured for clocking the timers from system
clock(HFOSC0).

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230531213215.602395-6-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721s2: Configure pinctrl for timer IO

There are timer IO pads in the MCU domain, and in the MAIN domain. These
pads can be muxed for the related timers.

The details of the multiplexing can be found in the register
documentation and Technical Reference Manual[1].

These are similar to J721e/J7200, but have different mux capabilities.

[1] https://www.ti.com/lit/zip/spruj28

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230531213215.602395-5-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721s2: Add general purpose timers

There are 20 general purpose timers on j721s2 that can be used for
things like PWM using pwm-omap-dmtimer driver. There are also
additional ten timers in the MCU domain which are meant for MCU
firmware usage and hence marked reserved by default.

Though the count is similar to J721e/J7200, the device IDs and clocks
used in j721s2 are different with the option of certain clocks having
options of additional clock muxes. Since there is very minimal reuse,
it is cleaner to integrate as part of SoC files itself. The defaults
are configured for clocking the timers from system clock(HFOSC0).

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230531213215.602395-4-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721e: Configure pinctrl for timer IO

There are timer IO pads in the MCU domain, and in the MAIN domain. These
pads can be muxed for the related timers.

There are timer IO control registers for input and output. The registers
for CTRLMMR_TIMER*_CTRL and CTRLMMR_MCU_TIMER*_CTRL are used to control
the input. The registers for CTCTRLMMR_TIMERIO*_CTRL and
CTRLMMR_MCU_TIMERIO*_CTRL the output.

The multiplexing is documented in Technical Reference Manual[1] under
"Timer IO Muxing Control Registers" and "Timer IO Muxing Control
Registers", and the "Timers Overview" chapters.

We do not expose the cascade_en bit due to the racy usage of
independent 32 bit registers in-line with the timer instantiation in
the device tree. The MCU timer controls are also marked as reserved for
usage by the MCU firmware.

[1] http://www.ti.com/lit/pdf/spruil1

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230531213215.602395-3-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721e: Add general purpose timers

There are 20 general purpose timers on j721e that can be used for
things like PWM using pwm-omap-dmtimer driver. There are also
additional ten timers in the MCU domain which are meant for MCU
firmware usage and hence marked reserved by default.

The odd numbered timers have the option of being cascaded to even
timers to create a 64 bit non-atomic counter which is racy in simple
usage, hence the clock muxes are explicitly setup to individual 32 bit
counters driven off system crystal (HFOSC) as default.

These instantiation differs from J7200 and other SoCs with the device
IDs and clocks involved for muxing.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230531213215.602395-2-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j784s4-mcu-wakeup: Add sa3_secproxy and mcu_sec_proxy

Security Management Subsystem(SMS) has it's own unique secure
proxy as part of Security Accelerator (SA3) module. This is used
for communicating with ROM and for special usecases such as HSM
operations. In addition MCU island has it's own secure proxy for
usecases involving the MCU micro controllers. These are in addition
to the one in the main domain DMSS subsystem that is used for general
purpose communication.

Describe the nodes for use with bootloaders and firmware that require
these communication paths which uses interrupts to corresponding micro
controller interrupt controller. Mark the node as disabled since these
instances do not have interrupts routed to the main processor by
default for a complete description of the node.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230530165900.47502-8-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721s2-mcu-wakeup: Add sa3_secproxy and mcu_sec_proxy

Security Management Subsystem(SMS) has it's own unique secure
proxy as part of Security Accelerator (SA3) module. This is used
for communicating with ROM and for special usecases such as HSM
operations. In addition MCU island has it's own secure proxy for
usecases involving the MCU micro controllers. These are in addition
to the one in the main domain DMSS subsystem that is used for general
purpose communication.

Describe the nodes for use with bootloaders and firmware that require
these communication paths which uses interrupts to corresponding micro
controller interrupt controller. Mark the node as disabled since these
instances do not have interrupts routed to the main processor by
default for a complete description of the node.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230530165900.47502-7-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721e-mcu: Add mcu_secproxy

MCU domain has it's own secure proxy for communicating with ROM and
for R5 micro controller firmware operations. This is in addition to
the one in the main domain NAVSS subsystem that is used for general
purpose communication.

Describe the node for use with bootloaders and firmware that require
this communication path which uses interrupts to corresponding micro
controller interrupt controller. Mark the node as disabled since this
instance does not have interrupts routed to the main processor by
default for a complete description of the node.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230530165900.47502-6-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j7200-mcu: Add mcu_secproxy

MCU domain has it's own secure proxy for communicating with ROM and
for R5 micro controller firmware operations. This is in addition to
the one in the main domain NAVSS subsystem that is used for general
purpose communication.

Describe the node for use with bootloaders and firmware that require
this communication path which uses interrupts to corresponding micro
controller interrupt controller. Mark the node as disabled since this
instance does not have interrupts routed to the main processor by
default for a complete description of the node.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230530165900.47502-5-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am65-mcu: Add mcu_secproxy

MCU domain has it's own secure proxy for communicating with ROM and
for R5 micro controller firmware operations. This is in addition to
the one in the main domain NAVSS subsystem that is used for general
purpose communication.

Describe the node for use with bootloaders and firmware that require
this communication path which uses interrupts to corresponding micro
controller interrupt controller. Mark the node as disabled since this
instance does not have interrupts routed to the main processor by
default for a complete description of the node.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230530165900.47502-4-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am62a-main: Add sa3_secproxy

Security Management Subsystem(SMS) has it's own unique secure
proxy as part of Security Accelerator (SA3) module. This is used
for communicating with ROM and for special usecases such as HSM
operations. This is in addition to the one in the main domain DMSS
subsystem that is used for general purpose communication.

Describe the node for use with bootloaders and firmware that require
this communication path which uses interrupts to corresponding micro
controller interrupt controller. Mark the node as disabled since this
instance does not have interrupts routed to the main processor by
default for a complete description of the node.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230530165900.47502-3-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am62-main: Add sa3_secproxy

Security Management Subsystem(SMS) has it's own unique secure
proxy as part of Security Accelerator (SA3) module. This is used
for communicating with ROM and for special usecases such as HSM
operations. This is in addition to the one in the main domain DMSS
subsystem that is used for general purpose communication.

Describe the node for use with bootloaders and firmware that require
this communication path which uses interrupts to corresponding micro
controller interrupt controller. Mark the node as disabled since this
instance does not have interrupts routed to the main processor by
default for a complete description of the node.

Signed-off-by: Nitin Yadav <n-yadav@ti.com>
[nm@ti.com: Update commit message, minor updates]
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230530165900.47502-2-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am65-iot2050-common: Rename rtc8564 nodename

Just use "rtc" as the nodename to better match with the bindings.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230607132043.3932726-4-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am65-main: Drop deprecated ti,otap-del-sel property

ti,otap-del-sel has been deprecated in favor of ti,otap-del-sel-legacy.

Drop the duplicate and misleading ti,otap-del-sel property.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230607132043.3932726-3-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am65-main: Fix mcan node name

s/mcan/can to stay in sync with bindings conventions.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230607132043.3932726-2-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am642-sk/evm: Describe OSPI flash partition info

Describe OSPI flash partition information through device tree, this
helps to remove passing partition information through the mtdparts
commandline parameter which requires maintaining the partition
information in a string format. AM64 SK and EVM has a S28 64 MiB OSPI
flash with sector size of 256 KiB thus the size of the smallest partition
is chosen as 256 KiB, the partition names and offsets are chosen according
to the corresponding name and offsets in bootloader.

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://lore.kernel.org/r/20230513141712.27346-6-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am654-baseboard: Describe OSPI flash partition info

Describe OSPI flash partition information through device tree, this
helps to remove passing partition information through the mtdparts
commandline parameter which requires maintaining the partition
information in a string format. AM654 baseboard has a MT35XU512ABA
64 MiB OSPI flash with sector size of 128 KiB thus the size of the
smallest partition is chosen as 128 KiB, the partition names and
offsets are chosen according to the corresponding name and offsets
in bootloader.

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://lore.kernel.org/r/20230513141712.27346-5-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j7200-som: Describe OSPI and Hyperflash partition info

Describe OSPI and Hyperflash partition information through device tree,
this helps to remove passing partition information through the mtdparts
commandline parameter which requires maintaining the partition information
in a string format. J7200 SoM has a S28 64 MiB OSPI flash with sector size
of 256 KiB thus the size of the smallest partition is chosen as 256 KiB,
the SoM also has a 64 MiB Hyperflash present on it, the partition names
and offsets are chosen according to the corresponding name and offsets
in bootloader.

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://lore.kernel.org/r/20230513141712.27346-4-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721e-sk: Describe OSPI flash partition info

Describe OSPI flash partition information through device tree, this
helps to remove passing partition information through the mtdparts
commandline parameter which requires maintaining the partition
information in a string format. J721E SK has a S28 64 MiB OSPI flash
with sector size of 256 KiB thus the size of the smallest partition is
chosen as 256 KiB, the partition names and offsets are chosen according
to the corresponding name and offsets in bootloader.

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://lore.kernel.org/r/20230513141712.27346-3-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721e: Describe OSPI and QSPI flash partition info

Describe OSPI and QSPI flash partition information through device tree,
this helps to remove passing partition information through the mtdparts
commandline parameter which requires maintaining the partition information
in a string format. J721E SoM has a MT35 64 MiB OSPI flash and  MT25 64 MiB
QSPI flash both with sector size of 128 KiB thus the size of the smallest
partition is chosen as 128KiB, the partition names and offsets are chosen
according to the corresponding name and offsets in bootloader.

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://lore.kernel.org/r/20230513141712.27346-2-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j784s4-evm: Add support for OSPI and QSPI flashes

J784S4 has S28HS512T OSPI flash connected to OSPI0 and MT25QU512A QSPI
flash connected to OSPI1, enable support for the same. Also describe
the partition information according to the offsets in the bootloader.

Co-developed-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Link: https://lore.kernel.org/r/20230504080305.38986-3-a-nandan@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j784s4-mcu-wakeup: Add FSS OSPI0 and FSS OSPI1

TI K3 J784S4 has the Cadence OSPI controllers OSPI0 and OSPI1 on FSS
bus for interfacing with OSPI flashes. Add the nodes to allow using
SPI flashes.

Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Link: https://lore.kernel.org/r/20230504080305.38986-2-a-nandan@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: Add LED controller to phyBOARD-Electra

With commit 9f6ffd0da650 ("dt-bindings: leds: Convert PCA9532 to dtschema"),
we can now add the LED controller without introducing new dtbs_check warnings.
Add missing I2C LED controller.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20230505131012.2027309-1-w.egorov@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721e-common-proc-board: Add OSPI/Hyperflash select pinmux

J721E common processor board has an onboard mux for selecting whether
the OSPI signals are externally routed to OSPI flash or Hyperflash. The
mux state signal input is tied to WKUP_GPIO0_8 and is used by bootloader
for enabling the corresponding node accordingly. Add pinmux for the same.

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://lore.kernel.org/r/20230513123313.11462-5-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j7200-common-proc-board: Add OSPI/Hyperflash select pinmux

J7200 common processor board has an onboard mux for selecting whether
the OSPI signals are externally routed to OSPI flash or Hyperflash. The
mux state signal input is tied to WKUP_GPIO0_6 and is used by bootloader
for enabling the corresponding node accordingly. Add pinmux for the same.

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://lore.kernel.org/r/20230513123313.11462-4-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721e-som-p0: Add HyperFlash node

J721E SoM has a HyperFlash and HyperRam connected to HyperBus memory
controller, add corresponding node, pinmux and partitions for the same.
HyperBus is muxed with OSPI and only one controller can be active at a
time, therefore keep HyperBus node disabled. Bootloader will detect the
external mux state through a wkup gpio and enable the node as required.

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://lore.kernel.org/r/20230513123313.11462-3-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721e-mcu-wakeup: Add HyperBus node

J721E has a Flash SubSystem that has one OSPI and one HyperBus with
muxed datapath and another independent OSPI. Add DT nodes for HyperBus
controller and keep it disabled and model the data path selection mux as a
reg-mux.

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://lore.kernel.org/r/20230513123313.11462-2-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721e: Enable MDIO nodes at the board level

MDIO nodes defined in the top-level J721e SoC dtsi files are incomplete
and will not be functional unless they are extended with a pinmux.

As the attached PHY is only known about at the board integration level,
these nodes should only be enabled when provided with this information.

Disable the MDIO nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230515172137.474626-5-afd@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am64: Enable Mailbox nodes at the board level

Mailbox nodes defined in the top-level AM64x SoC dtsi files are incomplete
and may not be functional unless they are extended with a chosen interrupt
and connection to a remote processor.

As the remote processors depend on memory nodes which are only known at
the board integration level, these nodes should only be enabled when
provided with the above information.

Disable the Mailbox nodes in the dtsi files and only enable the ones that
are actually used on a given board.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230515172137.474626-4-afd@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721e: Enable PCIe nodes at the board level

PCIe nodes defined in the top-level J721e SoC dtsi files are incomplete
and will not be functional unless they are extended with a SerDes PHY.
And usually only one of the two modes can be used at a time as they
share a SerDes link.

As the PHY and mode is only known at the board integration level, these
nodes should only be enabled when provided with this information.

Disable the PCIe nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230515172137.474626-3-afd@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721e: Remove PCIe endpoint nodes

These nodes are example nodes for the PCIe controller in "endpoint" mode.
By default the controller is in "root complex" mode and there is already a
DT node for the same.

Examples should go in the bindings or other documentation.

Remove this node.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230515172137.474626-2-afd@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721e-beagleboneai64: Fix mailbox node status

Mailbox nodes are now disabled by default. The BeagleBoard AI64 DT
addition went in at around the same time and must have missed that
change so the mailboxes are not re-enabled. Do that here.

Fixes: fae14a1cb8dd ("arm64: dts: ti: Add k3-j721e-beagleboneai64")
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230515172137.474626-1-afd@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j784s4-main: Enable support for high speed modes

eMMC tuning was incomplete earlier, so support for high speed modes was
kept disabled. Remove no-1-8-v property to enable support for high
speed modes for eMMC in J784S4 SoC.

Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20230502090814.144791-1-b-kapoor@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j784s4-evm: Add pinmux information for ADC

J784S4 has two instances of 8 channel ADCs in MCU domain. Add pinmux
information for both ADC nodes.

Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20230502081117.21431-3-b-kapoor@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j784s4-mcu-wakeup: Add support for ADC nodes

J784S4 has two instances of 8 channel ADCs in MCU domain. Add support
for both ADC nodes.

Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20230502081117.21431-2-b-kapoor@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: am65x: Add Rocktech OLDI panel DT overlay

The OLDI-LCD1EVM add on board has Rocktech RK101II01D-CT panel[1] with
integrated touch screen. The integrated touch screen is Goodix GT928.
This panel connects with AM65 GP-EVM[2].

Add DT nodes for these and connect the endpoint nodes with DSS.

[1]: Panel link
https://www.digimax.it/en/tft-lcd/20881-RK101II01D-CT

[2]: AM654 LCD EVM:
https://www.ti.com/tool/TMDSLCD1EVM

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
[abhatia1@ti.com: Make cosmetic and 6.4 kernel DTSO syntax changes]
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20230509102354.10116-2-a-bhatia1@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721e-main: Update delay select values for MMC subsystems

Update the delay values for various speed modes supported, based on
the revised august 2021 J721E Datasheet.

[1] - Table 7-77. MMC0 DLL Delay Mapping for All Timing Modes and
Table 7-86. MMC1/2 DLL Delay Mapping for All Timing Modes, in
https://www.ti.com/lit/ds/symlink/tda4vm.pdf,
(SPRSP36J – FEBRUARY 2019 – REVISED AUGUST 2021)

Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20230424093827.1378602-1-b-kapoor@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am62x-sk-common: Improve documentation of mcasp1_pins

Include documentation of the AMC package pin name as well to keep it
consistent with the rest of the pinctrl documentation.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230418213740.153519-5-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am62x-sk-common: Add eeprom

Add board EEPROM support to device tree

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230418213740.153519-4-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am62x-sk-common: Describe main_uart1 and wkup_uart

wkup_uart and main_uart1 on this platform is used by tifs and DM
firmwares. Describe them for completeness including the pinmux.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230418213740.153519-3-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am62x-sk-common: Drop extra EoL

Drop an extra EoL

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230418213740.153519-2-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3: j721s2/j784s4: Switch to https links

Looks like a couple of http:// links crept in. Use https instead.

While at it, drop unicode encoded character.

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230417225450.1182047-1-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: j721s2: Add VTM node

VTM stands for Voltage Thermal Management. Add the thermal zones.
Six sensors mapping to six thermal zones. Main0, Main1, Main2, Main3,
WKUP1 & WKUP2 domains respectively.

Signed-off-by: Keerthy <j-keerthy@ti.com>
[bb@ti.com: rebased on v6.3-rc1]
Signed-off-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20230405215328.3755561-8-bb@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: j7200: Add VTM node

VTM stands for Voltage Thermal Management. Add the thermal zones.
Three sensors mapping to 3 thermal zones. MCU, MPU & Main domains
respectively.

Signed-off-by: Keerthy <j-keerthy@ti.com>
[bb@ti.com: rebased on v6.3-rc1]
Signed-off-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20230405215328.3755561-7-bb@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: j721e: Add VTM node

VTM stands for Voltage Thermal Management. Add the thermal zones.
Five sensors mapping ton 5 thermal zones. WKUP, MPU, C7x, GPU & R5F
respectively.

Signed-off-by: Keerthy <j-keerthy@ti.com>
[bb@ti.com: rebased on v6.3-rc1]
Signed-off-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20230405215328.3755561-6-bb@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: j784s4: Add VTM node

VTM stands for Voltage Thermal Management. Add the thermal zones.
Seven sensors mapping to seven thermal zones. Main0, Main1, Main2, Main3,
Main4, WKUP1 & WKUP2 domains respectively.

Signed-off-by: Keerthy <j-keerthy@ti.com>
[bb@ti.com: rebased on v6.3-rc1]
Signed-off-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20230405215328.3755561-5-bb@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am62a-wakeup: add VTM node

The am62ax supports a single Voltage and Thermal Management (VTM) device
located in the wakeup domain with three associated temperature monitors
located in various hot spots of the die.

Signed-off-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20230405215328.3755561-4-bb@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am62-wakeup: add VTM node

The am62x supports a single Voltage and Thermal Management (VTM) module
located in the wakeup domain with two associated temperature monitors
located in hot spots of the die.

Signed-off-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20230405215328.3755561-3-bb@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am64-main: add VTM node

The am64x supports a single VTM module which is located in the main
domain with two associated temperature monitors located at different hot
spots on the die.

Tested-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20230405215328.3755561-2-bb@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe

x1 lane PCIe slot in the common processor board is enabled and connected to
J721S2 SOM. Add PCIe DT node in common processor board to reflect the
same.

Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230331090028.8373-9-r-gunasekaran@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node

Add PCIe1 RC device tree node for the single PCIe instance present on
the J721S2.

Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230331090028.8373-8-r-gunasekaran@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes

J721S2 has an OSPI NOR flash on its SOM connected the OSPI0 instance and a
QSPI NOR flash on the common processor board connected to the OSPI1
instance. Add support for the same

Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230331090028.8373-7-r-gunasekaran@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support

The board uses lane 1 of SERDES for USB. Set the mux
accordingly.

The USB controller and EVM supports super-speed for USB0
on the Type-C port. However, the SERDES has a limitation
that up to 2 protocols can be used at a time. The SERDES is
wired for PCIe, eDP and USB super-speed. It has been
chosen to use PCIe and eDP as default. So restrict
USB0 to high-speed mode.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230331090028.8373-6-r-gunasekaran@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0

Configure first lane to PCIe, the second lane to USB and the last two lanes
to eDP. Also, add sub-nodes to SERDES0 DT node to represent SERDES0 is
connected to PCIe.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230331090028.8373-5-r-gunasekaran@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI

Add support for two instance of OSPI in J721S2 SoC.

Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230331090028.8373-4-r-gunasekaran@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node

Add dt node for the single instance of WIZ (SERDES wrapper) and
SERDES module shared by PCIe, eDP and USB.

Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230331090028.8373-3-r-gunasekaran@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721s2-main: Add support for USB

Add support for single instance of USB 3.0 controller in J721S2 SoC.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230331090028.8373-2-r-gunasekaran@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am625: Enable Type-C port for USB0

USB0 is a Type-C port with dual data role and power sink.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230330084954.49763-3-rogerq@kernel.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j784s4-evm: Reserve memory for remote proc IPC

Reserve memory for remote processors. Two memory regions are reserved
for each remote processor. The first 1Mb region is used for virtio
Vring buffers for IPC and the second region is used for holding
resource table, trace buffer and as external memory to the remote
processor. The mailboxes are also assigned for each remote processor.

Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Link: https://lore.kernel.org/r/20230502231527.25879-4-hnagalla@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j784s4-main: Add C71x DSP nodes

The J784S4 SoCs have four TMS320C71x DSP subsystems in the MAIN voltage
domain. The functionality of these DSP subsystems is similar to the C71x
DSP subsystems on earlier k3 device J721S2. Each subsystem has a 48 KB of
L1D configurable SRAM/Cache and 512 KB of L2 SRAM/Cache. This subsystem
has a CMMU but is not currently used. The inter-processor communication
between the main A72 cores and the C71x DSPs is achieved through shared
memory and mailboxes. Add the DT nodes for these DSP processor sub-systems.

Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Link: https://lore.kernel.org/r/20230502231527.25879-3-hnagalla@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j784s4-main: Add R5F cluster nodes

The J784S4 SoCs have 4 dual-core Arm Cortex-R5F processor (R5FSS)
subsystems/clusters. One R5F cluster (MCU_R5FSS0) is present within
the MCU domain, and the remaining three clusters are present in the
MAIN domain (MAIN_R5FSS0, MAIN_R5FSS1 & MAIN_R5FSS2). The functionality
of the R5FSS is same as the R5FSS functionality on earlier K3 platform
device J721S2. Each of the R5FSS can be configured at boot time to be
either run in a LockStep mode or in an Asymmetric Multi Processing (AMP)
fashion in Split-mode. These subsystems have 64 KB each Tightly-Coupled
Memory (TCM) internal memories for each core split between two banks -
ATCM and BTCM (further interleaved into two banks). There are some IP
integration differences from standard Arm R5 clusters such as the absence
of an ACP port, presence of an additional TI-specific Region Address
Translater (RAT) module for translating 32-bit CPU addresses into
larger system bus addresses etc.

Add the DT nodes for the R5F cluster/subsystems, the two R5F cores are
each added as child nodes to the corresponding cluster node. The clusters
are configured to run in LockStep mode by default, with the ATCMs enabled
to allow the R5 cores to execute code from DDR with boot-strapping code
from ATCM. The inter-processor communication between the main A72 cores
and these processors is achieved through shared memory and Mailboxes.

The following firmware names are used by default for these cores, and
can be overridden in a board dts file if needed:
    MAIN R5FSS0 Core0: j784s4-main-r5f0_0-fw (both in LockStep and Split modes)
    MAIN R5FSS0 Core1: j784s4-main-r5f0_1-fw (needed only in Split mode)
    MAIN R5FSS1 Core0: j784s4-main-r5f1_0-fw (both in LockStep and Split modes)
    MAIN R5FSS1 Core1: j784s4-main-r5f1_1-fw (needed only in Split mode)
    MAIN R5FSS2 Core0: j784s4-main-r5f2_0-fw (both in LockStep and Split modes)
    MAIN R5FSS2 Core1: j784s4-main-r5f2_1-fw (needed only in Split mode)
    MCU R5FSS0 Core0: j784s4-mcu-r5f0_0-fw (needed only in Split mode)
    MCU R5FSS0 Core1: j784s4-mcu-r5f0_1-fw (needed only in Split mode)

Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Link: https://lore.kernel.org/r/20230502231527.25879-2-hnagalla@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j7200-som: Enable I2C

This patch enables wkup_i2c0 node in board dts file
along with pin mux and speed.
Also enables underneath eeprom CAV24C256WE.

J7200 Datasheet (Table 6-106, Section 6.4 Pin Multiplexing) :
https://www.ti.com/lit/ds/symlink/dra821u.pdf

J7200 User Guide (Section 4.3, Table 4-2) :
https://www.ti.com/lit/ug/spruiw7a/spruiw7a.pdf

Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230419040007.3022780-3-u-kumar1@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j7200: Fix physical address of pin

wkup_pmx splits into multiple regions. Like

    wkup_pmx0 -> 13 pins (WKUP_PADCONFIG 0 - 12)
    wkup_pmx1 -> 2 pins (WKUP_PADCONFIG 14 - 15)
    wkup_pmx2 -> 59 pins (WKUP_PADCONFIG 26 - 84)
    wkup_pmx3 -> 8 pins (WKUP_PADCONFIG 93 - 100)

With this split, pin offset needs to be adjusted to
match with new pmx for all pins above wkup_pmx0.

Example a pin under wkup_pmx1 should start from 0 instead of
old offset(0x38 WKUP_PADCONFIG 14 offset)

J7200 Datasheet (Table 6-106, Section 6.4 Pin Multiplexing) :
https://www.ti.com/lit/ds/symlink/dra821u.pdf

Fixes: 9ae21ac445e9 ("arm64: dts: ti: k3-j7200: Fix wakeup pinmux range")

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230419040007.3022780-2-u-kumar1@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am62a7-sk: Describe main_uart1 and wkup_uart

wkup_uart and main_uart1 on this platform is used by tifs and DM
firmwares. Describe them for completeness including the pinmux.

Signed-off-by: Nishanth Menon <nm@ti.com>
[bb@ti.com: updated pinmux and commit subject]
Signed-off-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20230425221708.549675-1-bb@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am65-main: Remove "syscon" nodes added for pcieX_ctrl

Remove "syscon" nodes added for pcieX_ctrl and have the PCIe node
point to the parent with an offset argument. This change is as
discussed in [1].

[1] http://lore.kernel.org/r/CAL_JsqKiUcO76bo1GoepWM1TusJWoty_BRy2hFSgtEVMqtrvvQ@mail.gmail.com

Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230424144949.244135-2-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: add missing cache properties

As all level 2 and level 3 caches are unified, add required
cache-unified properties to fix warnings like:

  k3-am6528-iot2050-basic-pg2.dtb: l3-cache0: 'cache-unified' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230421223143.115099-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am65: Drop aliases

iot boards have always defined their own aliases and with the base-board
defining it's own aliases, there are no pending boards depending on
common aliases defined in SoC level.

aliases are meant to be defined appropriately based on the exposed
interfaces at a board level, drop the aliases defined at SoC level.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh@ti.com>
Link: https://lore.kernel.org/r/20230419225913.663448-8-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am654-base-board: Add aliases

Introduce aliases compatible with the base definition, but focussed on
the interfaces that have been exposed on the platform.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh@ti.com>
Link: https://lore.kernel.org/r/20230419225913.663448-7-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am654-base-board: Add board detect eeprom

Enable AT24CM01 on the base board using the corresponding compatible.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh@ti.com>
Link: https://lore.kernel.org/r/20230419225913.663448-6-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am654-base-board: Add missing PMIC

Add the missing vdd_mpu PMIC.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh@ti.com>
Link: https://lore.kernel.org/r/20230419225913.663448-5-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am654-base-board: Add VTT GPIO regulator for DDR

Hold the DDR vtt regulator active for functionality.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh@ti.com>
Link: https://lore.kernel.org/r/20230419225913.663448-4-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am654-base-board: Rename regulator node name

Rename the regulator node names to the standard regulator-0.. numbers.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh@ti.com>
Link: https://lore.kernel.org/r/20230419225913.663448-3-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am654-base-board: Add missing pinmux wkup_uart, mcu_uart and mcu_i2c

Many of the definitions depend on pinmux done by the bootloader. Be
explicit about the pinmux for functionality and completeness.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh@ti.com>
Link: https://lore.kernel.org/r/20230419225913.663448-2-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am62a: Add watchdog nodes

Add nodes for watchdogs:
- 5 in main domain
- 1 in MCU domain
- 1 in wakeup domain

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230418012717.1230882-3-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am62a: Add general purpose timers

Similar to commit 3308a31c507c ("arm64: dts: ti: k3-am62: Add general
purpose timers for am62"), there are 12 general purpose timers on am62a7
split between 8 in main and 4 in mcu domains. The 4 in mcu domain do not
have interrupts that are routable to a53.

We configure the timers with the 25 MHz input clock by default as the
32.768 kHz clock may not be wired on the device. We leave the MCU domain
timers clock mux unconfigured, and mark the MCU domain timers reserved.
The MCU domain timers are likely reserved by the software for the ESM
module.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230418012717.1230882-2-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721s2-common-proc-board: Drop bootargs

Drop bootargs from the dts. The console arguments are already covered in
stdout-path property and earlycon is a debug property that should be
enabled only when debug is desired and not as default.

Link: https://lore.kernel.org/linux-arm-kernel/81134eb9-2b7d-05bc-3035-a47f020861a8@linaro.org/
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230419141222.383567-6-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j7200-common-proc-board: Drop bootargs

Drop bootargs from the dts. The console arguments are already covered in
stdout-path property and earlycon is a debug property that should be
enabled only when debug is desired and not as default.

Link: https://lore.kernel.org/linux-arm-kernel/81134eb9-2b7d-05bc-3035-a47f020861a8@linaro.org/
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230419141222.383567-5-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-j721e-*: Drop bootargs

Drop bootargs from the dts. The console arguments are already covered in
stdout-path property and earlycon is a debug property that should be
enabled only when debug is desired and not as default.

Link: https://lore.kernel.org/linux-arm-kernel/81134eb9-2b7d-05bc-3035-a47f020861a8@linaro.org/
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230419141222.383567-4-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am65*: Drop bootargs

Drop bootargs from the dts. earlycon is a debug property that should be
enabled only when debug is desired and not as default - see referenced
link on discussion on this topic.

Cc: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/linux-arm-kernel/81134eb9-2b7d-05bc-3035-a47f020861a8@linaro.org/
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/20230419141222.383567-3-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am62x-sk-common: Drop bootargs

Drop bootargs from the dts. The console arguments are already covered in
stdout-path property and earlycon is a debug property that should be
enabled only when debug is desired and not as default.

Link: https://lore.kernel.org/linux-arm-kernel/81134eb9-2b7d-05bc-3035-a47f020861a8@linaro.org/
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230419141222.383567-2-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am642-sk|evm: Drop bootargs, add aliases

Drop bootargs and add aliases based on base pinout of SK as per [1] and
evm per [2].

Indices chosen attempt to maintain some level of consistency with
existing aliases.

While at this, drop a extra EoL. While this patch could be split, it
seems trivial to add additional cleanup steps.

[1] https://www.ti.com/lit/df/sprr432/sprr432.pdf
[2] https://www.ti.com/lit/zip/swrr171

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230414073328.381336-11-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am642-evm: Add VTT GPIO regulator for DDR

Hold the DDR vtt regulator active for functionality.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230414073328.381336-10-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am642-evm: Rename regulator node name

Rename the regulator node names to the standard regulator-0.. numbers.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230414073328.381336-9-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am642-evm: Describe main_uart1 pins

Describe the main_uart1 pins even though it is a reserved node for
hardware complete description. This is used by other users of device
tree to help configure the SoC per board requirements.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230414073328.381336-8-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am642-evm: Enable main_i2c0 and eeprom

Enable AT24CM01 on the base board using the corresponding compatible.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230414073328.381336-7-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am642-sk: Rename regulator node name

Rename the regulator node names to the standard regulator-0.. numbers.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230414073328.381336-6-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am642-sk: Describe main_uart1 pins

Describe the main_uart1 pins even though it is a reserved node for
hardware complete description. This is used by other users of device
tree to help configure the SoC per board requirements.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230414073328.381336-5-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arm64: dts: ti: k3-am642-sk: Enable main_i2c0 and eeprom

Enable AT24C512C on the base board.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230414073328.381336-4-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>