Stefano Babic [Thu, 19 May 2011 15:40:01 +0000 (17:40 +0200)]
MX5: drop config.mk from efikamx board
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Marek Vasut <marek.vasut@gmail.com>
Stefano Babic [Tue, 17 May 2011 11:45:41 +0000 (13:45 +0200)]
MX31: Make get_reset_cause() static and drop unreachable code
get_reset_cause() should not be exported. Drop code in the function
after return statement that can generate warnings due to unreachable code.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Fabio Estevam [Sun, 15 May 2011 12:58:55 +0000 (12:58 +0000)]
MX53: Remove CONFIG_SYS_BOOTMAPSZ from mx53 config files.
commit ed59e58 (Remove device tree booting dependency on CONFIG_SYS_BOOTMAPSZ) made the
definition of CONFIG_SYS_BOOTMAPSZ unnecessary.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Jason Liu <jason.hui@linaro.org>
Fabio Estevam [Tue, 26 Apr 2011 10:50:15 +0000 (10:50 +0000)]
MX53: Handle silicon revision 2.1 case
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Jason Liu [Fri, 22 Apr 2011 02:55:42 +0000 (02:55 +0000)]
mx5: board: code clean up for checkboard code
The boot cause code has been factor out to soc common
code,we need drop the part from the board support code
This patch also remove the redundant cpu version print
Signed-off-by: Jason Liu <jason.hui@linaro.org>
Fabio Estevam [Tue, 10 May 2011 08:13:56 +0000 (08:13 +0000)]
MX51: vision2: Fix build for vision2 board.
config.mk should not be used in board directory and should be removed.
Use the same approach for building the image as other MX51/MX53 boards.
After this change vision2 board can be built again.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Fabio Estevam [Tue, 10 May 2011 07:50:46 +0000 (07:50 +0000)]
MX51: vision: Let video mode struct be independant of watchdog.
Currently the fb_videomode struct is only declared if CONFIG_HW_WATCHDOG is defined.
Remove this dependancy and let the video struct always be declared.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Fabio Estevam [Fri, 13 May 2011 03:15:11 +0000 (03:15 +0000)]
MX53: Add initial support for MX53SMD board.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Jason Liu [Fri, 13 May 2011 01:58:55 +0000 (01:58 +0000)]
MX53: support for freescale MX53LOCO board
This patch add initial support for freescale MX53LOCO board.
Network(FEC),SD/MMC,UART have been supported by this patch
Signed-off-by: Jason Liu <jason.hui@linaro.org>
Shawn Guo [Tue, 3 May 2011 20:13:17 +0000 (20:13 +0000)]
mx5: Fix CONFIG_OF_LIBFDT redefined warning
With the following commit, CONFIG_OF_LIBFDT is redefined.
2fa8ca98c37d5b1bb0328b19ddb7e9d162cd9683
Add CONFIG_OF_LIBFDT to more boards.
Remove the duplicated definition to fix CONFIG_OF_LIBFDT redefined
warning.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Shawn Guo [Tue, 3 May 2011 20:13:16 +0000 (20:13 +0000)]
mx5: Remove unnecessary CONFIG_SYS_BOOTMAPSZ definition
Since the following commit, definition CONFIG_SYS_BOOTMAPSZ is not
needed any more.
ed59e58786cae9f8afcb575649afc65985beed4d
Remove device tree booting dependency on CONFIG_SYS_BOOTMAPSZ
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Fabio Estevam [Tue, 26 Apr 2011 11:04:37 +0000 (11:04 +0000)]
mx31pdk: Clean up mx31pdk.h file
No need to use '#define SYMBOL 1' to make it active.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
ecc [Fri, 20 May 2011 15:33:47 +0000 (15:33 +0000)]
.gitignore: update list of u-boot.* files and add *.bin
This patch adds additional u-boot.* files mentioned in Makefile,
and adds *.bin since these are deleted as part of "make clean".
Signed-off-by: Eric Cooper <ecc@cmu.edu>
Wolfgang Denk [Fri, 20 May 2011 23:13:14 +0000 (23:13 +0000)]
MPC8xx: Make SPD823TS board build again
Commit e59e356 "TFTP: net/tftp.c: add server mode receive" caused the
size of some object files to grow which breaks the manually optimized
linking for the SPD823TS board. Adjust linker script as needed.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Thu, 19 May 2011 20:23:50 +0000 (22:23 +0200)]
Prepare v2011.06-rc1
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Thu, 19 May 2011 20:21:41 +0000 (22:21 +0200)]
Minor coding style cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Luca Ceresoli [Tue, 17 May 2011 00:03:41 +0000 (00:03 +0000)]
net/tftp.c: fix typo
Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
Luca Ceresoli [Tue, 17 May 2011 00:03:40 +0000 (00:03 +0000)]
TFTP: add tftpsrv command
Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
Luca Ceresoli [Tue, 17 May 2011 00:03:39 +0000 (00:03 +0000)]
TFTP: net/tftp.c: add server mode receive
Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
Luca Ceresoli [Tue, 17 May 2011 00:03:38 +0000 (00:03 +0000)]
TFTP: rename STATE_RRQ to STATE_SEND_RRQ
With the upcoming TFTP server implementation, requests can be either
outgoing or incoming, so avoid ambiguities.
Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
Luca Ceresoli [Tue, 17 May 2011 00:03:37 +0000 (00:03 +0000)]
TFTP: replace "server" with "remote" in local variable names
With the upcoming TFTP server implementation, the remote node can be
either a client or a server, so avoid ambiguities.
Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
Luca Ceresoli [Sat, 14 May 2011 05:50:03 +0000 (05:50 +0000)]
net/tftp.c: cosmetic: do not initialise statics to 0 or NULL
This removes the following checkpatch issue:
- ERROR: do not initialise statics to 0 or NULL
Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Luca Ceresoli [Sat, 14 May 2011 05:50:02 +0000 (05:50 +0000)]
net/tftp.c: cosmetic: fix indentation
This removes the following checkpatch issue:
- WARNING: suspect code indent for conditional statements
Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Luca Ceresoli [Sat, 14 May 2011 05:50:01 +0000 (05:50 +0000)]
net/tftp.c: cosmetic: trailing statements should be on next line
This removes the following checkpatch issue:
- ERROR: trailing statements should be on next line
Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Luca Ceresoli [Sat, 14 May 2011 05:50:00 +0000 (05:50 +0000)]
net/tftp.c: cosmetic: fix brace issues
This removes the following checkpatch issues:
- WARNING: braces {} are not necessary for single statement blocks
- WARNING: braces {} are not necessary for any arm of this statement
Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Luca Ceresoli [Sat, 14 May 2011 05:49:59 +0000 (05:49 +0000)]
net/tftp.c: cosmetic: do not use assignment in if condition
This removes the following checkpatch issue:
- ERROR: do not use assignment in if condition.
There is one such error left:
ERROR: do not use assignment in if condition
#239: FILE: tftp.c:239:
+ if (!ProhibitMcast
+ && (Bitmap = malloc(Mapsize))
+ && eth_get_dev()->mcast) {
which would require an additional nested if to be fixed, resulting in longer
and less readable code.
Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Luca Ceresoli [Sat, 14 May 2011 05:49:58 +0000 (05:49 +0000)]
net/tftp.c: cosmetic: fix pointer syntax issues
This removes the following checkpatch issues:
- ERROR: "foo * bar" should be "foo *bar"
- ERROR: "(foo*)" should be "(foo *)"
Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Luca Ceresoli [Sat, 14 May 2011 05:49:57 +0000 (05:49 +0000)]
net/tftp.c: cosmetic: fix whitespace issues
This removes the following checkpatch issues:
- ERROR: space prohibited before that close parenthesis ')'
- ERROR: space required after that ';' (ctx:BxV)
- ERROR: space required after that ',' (ctx:VxV)
- ERROR: space required after that ';' (ctx:VxV)
- ERROR: spaces required around that '<<=' (ctx:VxV)
- ERROR: spaces required around that '<' (ctx:VxV)
- ERROR: spaces required around that '=' (ctx:VxV)
- ERROR: spaces required around that '+=' (ctx:VxV)
- ERROR: spaces required around that '=' (ctx:VxW)
- WARNING: please, no spaces at the start of a line
- WARNING: space prohibited between function name and open parenthesis '('
Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Luca Ceresoli [Sat, 14 May 2011 05:49:56 +0000 (05:49 +0000)]
net/tftp.c: cosmetic: fix lines over 80 characters
Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Thu, 19 May 2011 19:30:22 +0000 (21:30 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
* 'master' of git://git.denx.de/u-boot-mpc85xx:
powerpc/85xx: add support for env in MMC/SPI on corenet ds boards
powerpc/85xx: Enable eSPI support on corenet ds boards
Holger Brunck [Thu, 12 May 2011 19:59:24 +0000 (19:59 +0000)]
km/common: add pnvramsize to default environment
The pnvram size was used later from start scripts in linux. Therefore
it was added to the default environment.
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Acked-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Detlev Zundel <dzu@denx.de>
Holger Brunck [Wed, 4 May 2011 01:47:34 +0000 (01:47 +0000)]
km/common: simplify default environment
This is a first step to simplify the default environment. Move all
the environment variables which are only needed for debugging
purpose to textfiles in the scripts directory. In case of debugging
these files can be loaded via tftp into RAM and set via the env import
command. Other variables are identified as obsolete and were removed.
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Acked-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Detlev Zundel <dzu@denx.de>
Thomas Herzmann [Thu, 12 May 2011 19:59:22 +0000 (19:59 +0000)]
km/common: implement boardId HWkey checks as u-boot cmd
BoardId and HWKey are used to identify the HW class of a given board.
The correct values are stored in the inventory eeprom. During creation
time of a boot package the boardId and HWkey for the SW is stored in
the default environment and burned into the flash. During boottime
the values in the inventory and in the environment are compared to
avoid starting of a SW which is not authorized for this board.
Some bootpackages are allowed to run on a set of different boardId
hwKey. In this case the environment variable boardIdListHex was added
to the default environment. In this case the command iterates over the
pair values and compares them with the values read from the inventory
eeprom.
The syntax of such a boardIdListHex value is e.g.: 158_1 159_1 159_2
Signed-off-by: Thomas Herzmann <thomas.herzmann@keymile.com>
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Acked-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Detlev Zundel <dzu@denx.de>
Dirk Behme [Sun, 15 May 2011 09:04:47 +0000 (09:04 +0000)]
MMC: omap_hsmmc.c: Add missing prototype header
Add missing header file to fix compilation warning
omap_hsmmc.c: In function 'omap_mmc_init':
omap_hsmmc.c:474: warning: implicit declaration of function 'get_cpu_family'
omap_hsmmc.c:474: warning: implicit declaration of function 'get_cpu_rev'
introduced by commit "MMC: omap_hsmmc.c: disable
multiblock rw on old rev omap34xx silicon"
(
4ca9244d74f146a0605f5bee28a66e39aae88d3e)
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
CC: Andy Fleming <afleming@freescale.com>
CC: John Rigby <john.rigby@linaro.org>
Fabio Estevam [Thu, 12 May 2011 09:33:27 +0000 (09:33 +0000)]
fsl_esdhc: Initialize mmc->b_max
commit 262951(MMC: make b_max unconditional) missed to update fsl_esdhc.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Lei Wen [Mon, 2 May 2011 16:26:26 +0000 (16:26 +0000)]
mmc: enable partition switch function for emmc
For emmc, it may have up to 7 partitions: two boot partitions, one
user partition, one RPMB partition and four general purpose partitions.
(Refer to JESD84-A44.pdf/page 154)
As bootloader may need to read out or reflashing images on those
different partitions, it is better to enable the partition switch with
console command support.
Also for partition would be restore to user partition(part 0) when CMD0
is used, so change mmc_init routine to perform normal initialization
only once for each slot, unless use the rescan command to force init
again.
Signed-off-by: Lei Wen <leiwen@marvell.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Lei Wen [Mon, 2 May 2011 16:26:25 +0000 (16:26 +0000)]
cmd_mmc: eliminate device num in the mmc command
mmc command applied device, like ide and usb...
Signed-off-by: Lei Wen <leiwen@marvell.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Thomas Chou [Tue, 19 Apr 2011 03:48:32 +0000 (03:48 +0000)]
mmc_spi: generate response for send status command
A "send status" command is added with the commit "mmc: checking
status after commands with R1b response". But the status register
returned from send status command of SPI protocol is different from
that of MMC/SD protocol. We do a simple test and generate a response
in stead of full bit-by-bit translation.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Shaohui Xie [Thu, 12 May 2011 10:46:40 +0000 (18:46 +0800)]
powerpc/85xx: add support for env in MMC/SPI on corenet ds boards
Signed-off-by: Shaohui Xie <b21989@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Shaohui Xie [Thu, 12 May 2011 10:46:14 +0000 (18:46 +0800)]
powerpc/85xx: Enable eSPI support on corenet ds boards
Signed-off-by: Shaohui Xie <b21989@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Wolfgang Denk [Wed, 18 May 2011 12:31:56 +0000 (14:31 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm: (40 commits)
avr32: add ATAG_BOARDINFO
at91: reworked support for otc570 board
at91: reworked support for meesc board
hammerhead: move CONFIG_SYS_TEXT_BASE to header
mimc200: move CONFIG_SYS_TEXT_BASE to header
favr-32-ezkit: move CONFIG_SYS_TEXT_BASE to header
atstk100x: move CONFIG_SYS_TEXT_BASE to header
atngw100: move CONFIG_SYS_TEXT_BASE to header
mimc200: fix "#define XXXX 1"
hammerhead: fix "#define XXXX 1"
favr-32-ezkit: fix "#define XXXX 1"
atstk1006: fix "#define XXXX 1"
atstk1004: fix "#define XXXX 1"
atstk1003: fix "#define XXXX 1"
atstk1002: fix "#define XXXX 1"
atngw100: fix "#define XXXX 1"
avr32: use single linker script
avr32/config.mk: simplify PLATFORM_RELFLAGS
avr32: fix linking
Add support for Bluewater Systems Snapper 9260 and 9G20 modules
...
Wolfgang Denk [Wed, 18 May 2011 12:30:31 +0000 (14:30 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
* 'master' of git://git.denx.de/u-boot-nand-flash:
nand_spl: nand_boot.c: Remove last CONFIG_SYS_NAND_READ_DELAY occurance
Andreas Bießmann [Tue, 12 Apr 2011 23:25:41 +0000 (23:25 +0000)]
avr32: add ATAG_BOARDINFO
This patch adds a new ATAG_BORADINFO to U-Boot. This tag is intended to hand
over the bd->bi_board_number to the linux kernel for early stage board
information like a board revision or other kind of board specific decisions
necessary before the linux peripherial drivers are up.
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
Daniel Gorsulowski [Mon, 18 Apr 2011 04:15:02 +0000 (04:15 +0000)]
at91: reworked support for otc570 board
The otc570 board support was broken. Within this opportunity, I completely
reworked the board files.
Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
Daniel Gorsulowski [Mon, 18 Apr 2011 04:15:01 +0000 (04:15 +0000)]
at91: reworked support for meesc board
The meesc board support was broken. Within this opportunity, I completely
reworked the board files.
Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
Andreas Bießmann [Mon, 18 Apr 2011 04:12:47 +0000 (04:12 +0000)]
hammerhead: move CONFIG_SYS_TEXT_BASE to header
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
Andreas Bießmann [Mon, 18 Apr 2011 04:12:46 +0000 (04:12 +0000)]
mimc200: move CONFIG_SYS_TEXT_BASE to header
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
Andreas Bießmann [Mon, 18 Apr 2011 04:12:45 +0000 (04:12 +0000)]
favr-32-ezkit: move CONFIG_SYS_TEXT_BASE to header
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
Andreas Bießmann [Mon, 18 Apr 2011 04:12:44 +0000 (04:12 +0000)]
atstk100x: move CONFIG_SYS_TEXT_BASE to header
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
Andreas Bießmann [Mon, 18 Apr 2011 04:12:43 +0000 (04:12 +0000)]
atngw100: move CONFIG_SYS_TEXT_BASE to header
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
Andreas Bießmann [Mon, 18 Apr 2011 04:12:42 +0000 (04:12 +0000)]
mimc200: fix "#define XXXX 1"
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
Andreas Bießmann [Mon, 18 Apr 2011 04:12:41 +0000 (04:12 +0000)]
hammerhead: fix "#define XXXX 1"
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
Andreas Bießmann [Mon, 18 Apr 2011 04:12:40 +0000 (04:12 +0000)]
favr-32-ezkit: fix "#define XXXX 1"
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
Andreas Bießmann [Mon, 18 Apr 2011 04:12:39 +0000 (04:12 +0000)]
atstk1006: fix "#define XXXX 1"
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
Andreas Bießmann [Mon, 18 Apr 2011 04:12:38 +0000 (04:12 +0000)]
atstk1004: fix "#define XXXX 1"
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
Andreas Bießmann [Mon, 18 Apr 2011 04:12:37 +0000 (04:12 +0000)]
atstk1003: fix "#define XXXX 1"
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
Andreas Bießmann [Mon, 18 Apr 2011 04:12:36 +0000 (04:12 +0000)]
atstk1002: fix "#define XXXX 1"
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
Andreas Bießmann [Mon, 18 Apr 2011 04:12:35 +0000 (04:12 +0000)]
atngw100: fix "#define XXXX 1"
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
Andreas Bießmann [Mon, 18 Apr 2011 04:12:34 +0000 (04:12 +0000)]
avr32: use single linker script
This patch move the atstk100x linker script to $(CPUDIR) and delete other
pure copies of this file in each board directory.
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
Andreas Bießmann [Mon, 18 Apr 2011 04:12:33 +0000 (04:12 +0000)]
avr32/config.mk: simplify PLATFORM_RELFLAGS
This patch removes PLATFORM_RELFLAGS from board specific config.mk files and
define them in arch specific config.mk file.
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
Andreas Bießmann [Wed, 9 Feb 2011 04:10:30 +0000 (04:10 +0000)]
avr32: fix linking
This patch fixes following error:
---8<---
avr32-linux-ld: --gc-sections and -r may not be used together
--->8---
Since
8aba9dceebb14144e07d19593111ee3a999c37fc all avr32 boards are broken due
to linking error as seen above.
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
Ryan Mallon [Tue, 1 Feb 2011 16:18:00 +0000 (16:18 +0000)]
Add support for Bluewater Systems Snapper 9260 and 9G20 modules
Add support for Bluewater Systems AT91 based Snapper 9260 and 9G20
single board computer modules. Includes NAND flash and Ethernet
support.
Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Daniel Gorsulowski [Thu, 20 Jan 2011 23:12:15 +0000 (23:12 +0000)]
at91: fixed at91sam9263 system file
Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
Jens Scharsig [Wed, 22 Dec 2010 01:16:47 +0000 (01:16 +0000)]
remove __attribute__ ((packed)) in at91 headers
* remove __attribute__ ((packed)) to prevent byte access
to soc registers in some gcc version
Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
Jens Scharsig [Sat, 18 Dec 2010 02:30:04 +0000 (02:30 +0000)]
at91rm9200: fix lowlevel_init() SMRDATA size
* use start/end label for initialization tables instead of fix values
Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
Reinhard Meyer [Wed, 10 Nov 2010 17:07:56 +0000 (18:07 +0100)]
AT91: fix timer.c - remove reset_timer()
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Reinhard Meyer [Fri, 4 Feb 2011 19:17:33 +0000 (20:17 +0100)]
AT91: fix at91sam_wdt.c to reworked header files
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Reinhard Meyer [Wed, 10 Nov 2010 17:08:47 +0000 (18:08 +0100)]
AT91: remove LEGACY from at91_rstc.h
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Reinhard Meyer [Tue, 9 Nov 2010 16:06:20 +0000 (17:06 +0100)]
ATMEL: fix dataflash (dirty) this file should be converted to struct SoC access
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Reinhard Meyer [Sun, 7 Nov 2010 12:26:14 +0000 (13:26 +0100)]
AT91: change includes from asm/arch/io.h to asm/io.h
and remove the now unused asm/arch-at91/io.h
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Reinhard Meyer [Sun, 7 Nov 2010 11:38:43 +0000 (12:38 +0100)]
AT91: cleanup at91sam9260_matrix.h to struct SoC access
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Reinhard Meyer [Wed, 3 Nov 2010 15:32:56 +0000 (16:32 +0100)]
ATMEL: fix related common atmel driver files
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Reinhard Meyer [Wed, 3 Nov 2010 14:47:20 +0000 (15:47 +0100)]
AT91: fix related at91 driver files
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Reinhard Meyer [Wed, 3 Nov 2010 14:39:55 +0000 (15:39 +0100)]
AT91: fix related at91 system/driver files
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Reinhard Meyer [Wed, 3 Nov 2010 14:38:33 +0000 (15:38 +0100)]
AT91: fix related arch-at91 header files
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Reinhard Meyer [Wed, 3 Nov 2010 10:30:23 +0000 (11:30 +0100)]
AT91: cleanup hardware.h, remove memory-map.h
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Reinhard Meyer [Fri, 18 Feb 2011 08:33:51 +0000 (09:33 +0100)]
AT91: rework at91sam9g45.h
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Reinhard Meyer [Fri, 19 Nov 2010 09:05:01 +0000 (10:05 +0100)]
AT91: rework at91sam9263.h
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Reinhard Meyer [Fri, 19 Nov 2010 09:04:37 +0000 (10:04 +0100)]
AT91: rework at91sam9261.h
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Reinhard Meyer [Tue, 2 Nov 2010 10:55:42 +0000 (11:55 +0100)]
AT91: rework at91sam9260.h
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Andreas Bießmann [Thu, 4 Nov 2010 23:15:31 +0000 (23:15 +0000)]
avr32: fixup definitions to ATMEL_BASE_xxx
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
Andreas Bießmann [Thu, 4 Nov 2010 23:15:30 +0000 (23:15 +0000)]
avr32: rename memory-map.h -> hardware.h
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
Thomas Chou [Sun, 17 Apr 2011 02:52:46 +0000 (10:52 +0800)]
nios2: Make STANDALONE_LOAD_ADDR configurable per board
Follow commit
8ae86b76c648d8bef97241c78e2fddb1c4f164d3
which changed the variable name.
Fix this error,
nios2-elf-ld: invalid hex number `-o'
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
Stefan Roese [Mon, 16 May 2011 11:04:00 +0000 (13:04 +0200)]
nand_spl: nand_boot.c: Remove last CONFIG_SYS_NAND_READ_DELAY occurance
Remove the last CONFIG_SYS_NAND_READ_DELAY occurance from nand_boot.c.
I missed this one in patch
a9c847cb [nand_spl: nand_boot.c: Remove
CONFIG_SYS_NAND_READ_DELAY].
This fixes a compile breakage on kilauea_nand for example.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Wolfgang Denk [Sun, 15 May 2011 21:23:36 +0000 (23:23 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
Wolfgang Denk [Sun, 15 May 2011 21:20:10 +0000 (23:20 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Stefan Roese [Wed, 4 May 2011 09:44:14 +0000 (11:44 +0200)]
nand_spl: nand_boot.c: Remove CONFIG_SYS_NAND_READ_DELAY
There are multiple reasons why this define should be removed:
First it saves some space and therefore fixes a problem we have on
the canyonlands_nand and glacier_nand targets right now.
Second, the define was hackish and would most likely not work on all
board using nand_boot.c. Boards not providing a real dev_ready()
function should implement a board specific function instead.
I checked and it seems, that all boards using nand_boot.c right now
already implement a board specific dev_ready() function. So this
patch should not break any boards and will result in smaller
NAND_SPL images.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Sughosh Ganu <urwithsughosh@gmail.com>
Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Tested-by: Sughosh Ganu <urwithsughosh@gmail.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Stefan Roese [Wed, 4 May 2011 09:44:44 +0000 (11:44 +0200)]
nand_spl: nand_boot.c: Init nand_chip.options to 0
Patch
65a9db7b [nand_spl: Fix large page nand_command()] broke
nand booting on canyonlands. "options" has to be initialized to
0. If not, boards might have the NAND_BUSWIDTH_16 bit set,
resulting in wrong offset calculation.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Alex Waterman <awaterman@dawning.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Alex Waterman [Wed, 4 May 2011 13:10:15 +0000 (09:10 -0400)]
Decreases code size of the nand_spl
The canyonland boards nand_spl size is just under the maximum 4KByte size. This
patch decreases the size of the nand_spl to make a previous commit - commit
65a9db7be0868be91ba81b9b5bf821de82e6d9b0 - fit in the nand_spl.
Signed-off-by: Alex Waterman <awaterman@dawning.com>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Wolfgang Denk [Fri, 13 May 2011 11:36:32 +0000 (13:36 +0200)]
Revert "Fix building tools alone with host compiler"
This reverts commit
bbc6353c740064c8e0741b772376a1a67a1c3f01.
It breaks building on many systems:
...
.../common/env_embedded.c:28:20: fatal error: config.h: No such file or directory
compilation terminated.
.../common/image.c:27:20: fatal error: common.h: No such file or directory
compilation terminated.
.../lib/crc32.c:12:20: fatal error: common.h: No such file or directory
compilation terminated.
.../lib/md5.c:28:22: fatal error: compiler.h: No such file or directory
compilation terminated.
.../lib/sha1.c:33:20: fatal error: common.h: No such file or directory
compilation terminated.
York Sun [Thu, 5 May 2011 23:14:14 +0000 (07:14 +0800)]
powerpc/mpc8xxx: reword max tCKmin message
Reword "The DIMM max tCKmin is ..." to "The DDR clock is faster than the slowest
DIMM(s) can support". Fixed interger type in printf as well.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Timur Tabi [Fri, 29 Apr 2011 23:08:44 +0000 (18:08 -0500)]
powerpc/85xx: fix compatible property for the L2 cache node
The compatible property for the L2 cache node (on 85xx systems that don't
have a CPC) was using a value for the property length that did not match
the actual length of the property.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Nobuhiro Iwamatsu [Tue, 10 May 2011 17:33:08 +0000 (17:33 +0000)]
kwbimage: Fix check variable of checksum
calc_hdrcsum two times are checked. checksumi of exthdr is not checked.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
CC: Prafulla Wadaskar <prafulla@marvell.com>
Mike Frysinger [Sat, 7 May 2011 12:05:30 +0000 (12:05 +0000)]
examples: add smc911x_eeprom to clean target
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Macpaul Lin [Mon, 2 May 2011 01:28:47 +0000 (01:28 +0000)]
ftpmu010.h: fix some missing declaration in header
Fix some missing declaration in header.
Signed-off-by: Macpaul Lin <macpaul@andestech.com>
Macpaul Lin [Sun, 1 May 2011 22:17:31 +0000 (22:17 +0000)]
ftsmc020: add missing definitions
Add missing definitions in header file according to datasheet.
Signed-off-by: Macpaul Lin <macpaul@andestech.com>
Macpaul Lin [Sun, 1 May 2011 22:17:30 +0000 (22:17 +0000)]
ftsmc020: un-nest the register structure in header
Un-nestted the register structure in ftsmc020.h
Signed-off-by: Macpaul Lin <macpaul@andestech.com>
Macpaul Lin [Sun, 1 May 2011 22:17:29 +0000 (22:17 +0000)]
ftsmc020: fix relocation
Avoid relocation problem by fix global declaration.
Signed-off-by: Macpaul Lin <macpaul@andestech.com>
Macpaul Lin [Sun, 1 May 2011 21:28:56 +0000 (21:28 +0000)]
ftide020: add faraday ide ahb controller
Faraday's ftide020_s is an IDE-AHB controller for SoC design.
This patch add the u-boot driver (PIO) of ftide020 ATA (IDE) driver.
IDE commands include read, info, and other functions has been implemented.
Because this IDE controller support AHB interface only which is differ
from other most IDE controller supports PCI interface. Some registers
access is required during CMD/DATA I/O. Hence a configuration
"CONFIG_IDE_AHB" is required to be defined according to the feature in
cmd_ide.c.
Signed-off-by: Macpaul Lin <macpaul@andestech.com>
Ben Gardiner [Thu, 28 Apr 2011 11:03:21 +0000 (11:03 +0000)]
README.arm-relocation: get relocated address in gdb
When your emulator is connected at reset (or is used to load u-boot)
it is possible to get the relocation address from the gd->relocaddr
since gd is always in r8 (on ARM) it is addressable before the
gdb has remapped symbols.
Document this alternate method in-line with the original method
written by Heiko Schocher.
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
CC: Heiko Schocher <hs@denx.de>
CC: Wolfgang Denk <wd@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
projects / platform / kernel / u-boot.git / log