crypto: sha512_ssse3 - fix byte count to bit count conversion

commit cfe82d4f45c7cc39332a2be7c4c1d3bf279bbd3d upstream.

Byte-to-bit-count computation is only partly converted to big-endian and is
mixing in CPU-endian values. Problem was noticed by sparce with warning:

  CHECK   arch/x86/crypto/sha512_ssse3_glue.c
arch/x86/crypto/sha512_ssse3_glue.c:144:19: warning: restricted __be64 degrades to integer
arch/x86/crypto/sha512_ssse3_glue.c:144:17: warning: incorrect type in assignment (different base types)
arch/x86/crypto/sha512_ssse3_glue.c:144:17:    expected restricted __be64 <noident>
arch/x86/crypto/sha512_ssse3_glue.c:144:17:    got unsigned long long

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: Makefile: fix compilation for davinci platform

commit 5a90af67c2126fe1d04ebccc1f8177e6ca70d3a9 upstream.

Since commtit 8a7b1227e303 (cpufreq: davinci: move cpufreq driver to
drivers/cpufreq) this added dependancy only for CONFIG_ARCH_DAVINCI_DA850
where as davinci_cpufreq_init() call is used by all davinci platform.

This patch fixes following build error:

arch/arm/mach-davinci/built-in.o: In function `davinci_init_late':
:(.init.text+0x928): undefined reference to `davinci_cpufreq_init'
make: *** [vmlinux] Error 1

Fixes: 8a7b1227e303 (cpufreq: davinci: move cpufreq driver to drivers/cpufreq)
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf: Clear MMCR2 when enabling PMU

commit b50a6c584bb47b370f84bfd746770c0bbe7129b7 upstream.

On POWER8 when switching to a KVM guest we set bits in MMCR2 to freeze
the PMU counters. Aside from on boot they are then never reset,
resulting in stuck perf counters for any user in the guest or host.

We now set MMCR2 to 0 whenever enabling the PMU, which provides a sane
state for perf to use the PMU counters under either the guest or the
host.

This was manifesting as a bug with ppc64_cpu --frequency:

    $ sudo ppc64_cpu --frequency
    WARNING: couldn't run on cpu 0
    WARNING: couldn't run on cpu 8
      ...
    WARNING: couldn't run on cpu 144
    WARNING: couldn't run on cpu 152
    min:    18446744073.710 GHz (cpu -1)
    max:    0.000 GHz (cpu -1)
    avg:    0.000 GHz

The command uses a perf counter to measure CPU cycles over a fixed
amount of time, in order to approximate the frequency of the machine.
The counters were returning zero once a guest was started, regardless of
weather it was still running or had been shut down.

By dumping the value of MMCR2, it was observed that once a guest is
running MMCR2 is set to 1s - which stops counters from running:

    $ sudo sh -c 'echo p > /proc/sysrq-trigger'
    CPU: 0 PMU registers, ppmu = POWER8 n_counters = 6
    PMC1:  5b635e38 PMC2: 00000000 PMC3: 00000000 PMC4: 00000000
    PMC5:  1bf5a646 PMC6: 5793d378 PMC7: deadbeef PMC8: deadbeef
    MMCR0: 0000000080000000 MMCR1: 000000001e000000 MMCRA: 0000040000000000
    MMCR2: fffffffffffffc00 EBBHR: 0000000000000000
    EBBRR: 0000000000000000 BESCR: 0000000000000000
    SIAR:  00000000000a51cc SDAR:  c00000000fc40000 SIER:  0000000001000000

This is done unconditionally in book3s_hv_interrupts.S upon entering the
guest, and the original value is only save/restored if the host has
indicated it was using the PMU. This is okay, however the user of the
PMU needs to ensure that it is in a defined state when it starts using
it.

Fixes: e05b9b9e5c10 ("powerpc/perf: Power8 PMU support")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf: Add PPMU_ARCH_207S define

commit 4d9690dd56b0d18f2af8a9d4a279cb205aae3345 upstream.

Instead of separate bits for every POWER8 PMU feature, have a single one
for v2.07 of the architecture.

This saves us adding a MMCR2 define for a future patch.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/perf: Never program book3s PMCs with values >= 0x80000000

commit f56029410a13cae3652d1f34788045c40a13ffc7 upstream.

We are seeing a lot of PMU warnings on POWER8:

    Can't find PMC that caused IRQ

Looking closer, the active PMC is 0 at this point and we took a PMU
exception on the transition from negative to 0. Some versions of POWER8
have an issue where they edge detect and not level detect PMC overflows.

A number of places program the PMC with (0x80000000 - period_left),
where period_left can be negative. We can either fix all of these or
just ensure that period_left is always >= 1.

This patch takes the second option.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / resources: only reject zero length resources based at address zero

commit 867f9d463b82462793ea4610e748be0b04b37fc7 upstream.

The recently merged change (in v3.14-rc6) to ACPI resource detection
(below) causes all zero length ACPI resources to be elided from the
table:

  commit b355cee88e3b1a193f0e9a81db810f6f83ad728b
  Author: Zhang Rui <rui.zhang@intel.com>
  Date:   Thu Feb 27 11:37:15 2014 +0800

    ACPI / resources: ignore invalid ACPI device resources

This change has caused a regression in (at least) serial port detection
for a number of machines (see LP#1313981 [1]).  These seem to represent
their IO regions (presumably incorrectly) as a zero length region.
Reverting the above commit restores these serial devices.

Only elide zero length resources which lie at address 0.

Fixes: b355cee88e3b (ACPI / resources: ignore invalid ACPI device resources)
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (adm1021) Fix cache problem when writing temperature limits

commit c024044d4da2c9c3b32933b4235df1e409293b84 upstream.

The module test script for the adm1021 driver exposes a cache problem
when writing temperature limits. temp_min and temp_max are expected
to be stored in milli-degrees C but are stored in degrees C.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (adm1029) Ensure the fan_div cache is updated in set_fan_div

commit 1035a9e3e9c76b64a860a774f5b867d28d34acc2 upstream.

Writing to fanX_div does not clear the cache. As a result, reading
from fanX_div may return the old value for up to two seconds
after writing a new value.

This patch ensures the fan_div cache is updated in set_fan_div().

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (adm1031) Fix writes to limit registers

commit 145e74a4e5022225adb84f4e5d4fff7938475c35 upstream.

Upper limit for write operations to temperature limit registers
was clamped to a fractional value. However, limit registers do
not support fractional values. As a result, upper limits of 127.5
degrees C or higher resulted in a rounded limit of 128 degrees C.
Since limit registers are signed, this was stored as -128 degrees C.
Clamp limits to (-55, +127) degrees C to solve the problem.

Value on writes to auto_temp[12]_min and auto_temp[12]_max were not
clamped at all, but masked. As a result, out-of-range writes resulted
in a more or less arbitrary limit. Clamp those attributes to (0, 127)
degrees C for more predictable results.

Cc: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (amc6821) Fix permissions for temp2_input

commit df86754b746e9a0ff6f863f690b1c01d408e3cdc upstream.

temp2_input should not be writable, fix it.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

workqueue: zero cpumask of wq_numa_possible_cpumask on init

commit 5a6024f1604eef119cf3a6fa413fe0261a81a8f3 upstream.

When hot-adding and onlining CPU, kernel panic occurs, showing following
call trace.

  BUG: unable to handle kernel paging request at 0000000000001d08
  IP: [<ffffffff8114acfd>] __alloc_pages_nodemask+0x9d/0xb10
  PGD 0
  Oops: 0000 [#1] SMP
  ...
  Call Trace:
   [<ffffffff812b8745>] ? cpumask_next_and+0x35/0x50
   [<ffffffff810a3283>] ? find_busiest_group+0x113/0x8f0
   [<ffffffff81193bc9>] ? deactivate_slab+0x349/0x3c0
   [<ffffffff811926f1>] new_slab+0x91/0x300
   [<ffffffff815de95a>] __slab_alloc+0x2bb/0x482
   [<ffffffff8105bc1c>] ? copy_process.part.25+0xfc/0x14c0
   [<ffffffff810a3c78>] ? load_balance+0x218/0x890
   [<ffffffff8101a679>] ? sched_clock+0x9/0x10
   [<ffffffff81105ba9>] ? trace_clock_local+0x9/0x10
   [<ffffffff81193d1c>] kmem_cache_alloc_node+0x8c/0x200
   [<ffffffff8105bc1c>] copy_process.part.25+0xfc/0x14c0
   [<ffffffff81114d0d>] ? trace_buffer_unlock_commit+0x4d/0x60
   [<ffffffff81085a80>] ? kthread_create_on_node+0x140/0x140
   [<ffffffff8105d0ec>] do_fork+0xbc/0x360
   [<ffffffff8105d3b6>] kernel_thread+0x26/0x30
   [<ffffffff81086652>] kthreadd+0x2c2/0x300
   [<ffffffff81086390>] ? kthread_create_on_cpu+0x60/0x60
   [<ffffffff815f20ec>] ret_from_fork+0x7c/0xb0
   [<ffffffff81086390>] ? kthread_create_on_cpu+0x60/0x60

In my investigation, I found the root cause is wq_numa_possible_cpumask.
All entries of wq_numa_possible_cpumask is allocated by
alloc_cpumask_var_node(). And these entries are used without initializing.
So these entries have wrong value.

When hot-adding and onlining CPU, wq_update_unbound_numa() is called.
wq_update_unbound_numa() calls alloc_unbound_pwq(). And alloc_unbound_pwq()
calls get_unbound_pool(). In get_unbound_pool(), worker_pool->node is set
as follow:

3592         /* if cpumask is contained inside a NUMA node, we belong to that node */
3593         if (wq_numa_enabled) {
3594                 for_each_node(node) {
3595                         if (cpumask_subset(pool->attrs->cpumask,
3596                                            wq_numa_possible_cpumask[node])) {
3597                                 pool->node = node;
3598                                 break;
3599                         }
3600                 }
3601         }

But wq_numa_possible_cpumask[node] does not have correct cpumask. So, wrong
node is selected. As a result, kernel panic occurs.

By this patch, all entries of wq_numa_possible_cpumask are allocated by
zalloc_cpumask_var_node to initialize them. And the panic disappeared.

Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: bce903809ab3 ("workqueue: add wq_numa_tbl_len and wq_numa_possible_cpumask[]")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpuset,mempolicy: fix sleeping function called from invalid context

commit 391acf970d21219a2a5446282d3b20eace0c0d7a upstream.

When runing with the kernel(3.15-rc7+), the follow bug occurs:
[ 9969.258987] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:586
[ 9969.359906] in_atomic(): 1, irqs_disabled(): 0, pid: 160655, name: python
[ 9969.441175] INFO: lockdep is turned off.
[ 9969.488184] CPU: 26 PID: 160655 Comm: python Tainted: G       A      3.15.0-rc7+ #85
[ 9969.581032] Hardware name: FUJITSU-SV PRIMEQUEST 1800E/SB, BIOS PRIMEQUEST 1000 Series BIOS Version 1.39 11/16/2012
[ 9969.706052]  ffffffff81a20e60 ffff8803e941fbd0 ffffffff8162f523 ffff8803e941fd18
[ 9969.795323]  ffff8803e941fbe0 ffffffff8109995a ffff8803e941fc58 ffffffff81633e6c
[ 9969.884710]  ffffffff811ba5dc ffff880405c6b480 ffff88041fdd90a0 0000000000002000
[ 9969.974071] Call Trace:
[ 9970.003403]  [<ffffffff8162f523>] dump_stack+0x4d/0x66
[ 9970.065074]  [<ffffffff8109995a>] __might_sleep+0xfa/0x130
[ 9970.130743]  [<ffffffff81633e6c>] mutex_lock_nested+0x3c/0x4f0
[ 9970.200638]  [<ffffffff811ba5dc>] ? kmem_cache_alloc+0x1bc/0x210
[ 9970.272610]  [<ffffffff81105807>] cpuset_mems_allowed+0x27/0x140
[ 9970.344584]  [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150
[ 9970.409282]  [<ffffffff811b1385>] __mpol_dup+0xe5/0x150
[ 9970.471897]  [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150
[ 9970.536585]  [<ffffffff81068c86>] ? copy_process.part.23+0x606/0x1d40
[ 9970.613763]  [<ffffffff810bf28d>] ? trace_hardirqs_on+0xd/0x10
[ 9970.683660]  [<ffffffff810ddddf>] ? monotonic_to_bootbased+0x2f/0x50
[ 9970.759795]  [<ffffffff81068cf0>] copy_process.part.23+0x670/0x1d40
[ 9970.834885]  [<ffffffff8106a598>] do_fork+0xd8/0x380
[ 9970.894375]  [<ffffffff81110e4c>] ? __audit_syscall_entry+0x9c/0xf0
[ 9970.969470]  [<ffffffff8106a8c6>] SyS_clone+0x16/0x20
[ 9971.030011]  [<ffffffff81642009>] stub_clone+0x69/0x90
[ 9971.091573]  [<ffffffff81641c29>] ? system_call_fastpath+0x16/0x1b

The cause is that cpuset_mems_allowed() try to take
mutex_lock(&callback_mutex) under the rcu_read_lock(which was hold in
__mpol_dup()). And in cpuset_mems_allowed(), the access to cpuset is
under rcu_read_lock, so in __mpol_dup, we can reduce the rcu_read_lock
protection region to protect the access to cpuset only in
current_cpuset_is_being_rebound(). So that we can avoid this bug.

This patch is a temporary solution that just addresses the bug
mentioned above, can not fix the long-standing issue about cpuset.mems
rebinding on fork():

"When the forker's task_struct is duplicated (which includes
 ->mems_allowed) and it races with an update to cpuset_being_rebound
 in update_tasks_nodemask() then the task's mems_allowed doesn't get
 updated. And the child task's mems_allowed can be wrong if the
 cpuset's nodemask changes before the child has been added to the
 cgroup's tasklist."

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

workqueue: fix dev_set_uevent_suppress() imbalance

commit bddbceb688c6d0decaabc7884fede319d02f96c8 upstream.

Uevents are suppressed during attributes registration, but never
restored, so kobject_uevent() does nothing.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 226223ab3c4118ddd10688cc2c131135848371ab
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: add serial ports of C8000/1GHz machine to hardware database

commit eadcc7208a2237016be7bdff4551ba7614da85c8 upstream.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: Add Infineon Triboard

commit d8279a40e50ad55539780aa617a32a53d7f0953e upstream.

This adds support for Infineon TriBoard TC1798 [1]. Only interface 1
is used as serial line (see [2], Figure 8-6).

[1] http://www.infineon.com/cms/de/product/microcontroller/development-tools-software-and-kits/tricore-tm-development-tools-software-and-kits/starterkits-and-evaluation-boards/starter-kit-tc1798/channel.html?channel=db3a304333b8a7ca0133cfa3d73e4268
[2] http://www.infineon.com/dgdl/TriBoardManual-TC1798-V10.pdf?folderId=db3a304412b407950112b409ae7c0343&fileId=db3a304333b8a7ca0133cfae99fe426a

Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: ftdi_sio: Add extra PID.

commit 5a7fbe7e9ea0b1b9d7ffdba64db1faa3a259164c upstream.

This patch adds PID 0x0003 to the VID 0x128d (Testo). At least the
Testo 435-4 uses this, likely other gear as well.

Signed-off-by: Bert Vermeulen <bert@biot.com>
Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cp210x: add support for Corsair usb dongle

commit b9326057a3d8447f5d2e74a7b521ccf21add2ec0 upstream.

Corsair USB Dongles are shipped with Corsair AXi series PSUs.
These are cp210x serial usb devices, so make driver detect these.
I have a program, that can get information from these PSUs.

Tested with 2 different dongles shipped with Corsair AX860i and
AX1200i units.

Signed-off-by: Andras Kovacs <andras@sth.sze.hu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: option: Add ID for Telewell TW-LTE 4G v2

commit 3d28bd840b2d3981cd28caf5fe1df38f1344dd60 upstream.

Add ID of the Telewell 4G v2 hardware to option driver to get legacy
serial interface working

Signed-off-by: Bernd Wachter <bernd.wachter@jolla.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.10.48

mm: fix crashes from mbind() merging vmas

commit d05f0cdcbe6388723f1900c549b4850360545201 upstream.

In v2.6.34 commit 9d8cebd4bcd7 ("mm: fix mbind vma merge problem")
introduced vma merging to mbind(), but it should have also changed the
convention of passing start vma from queue_pages_range() (formerly
check_range()) to new_vma_page(): vma merging may have already freed
that structure, resulting in BUG at mm/mempolicy.c:1738 and probably
worse crashes.

Fixes: 9d8cebd4bcd7 ("mm: fix mbind vma merge problem")
Reported-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Tested-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hugetlb: fix copy_hugetlb_page_range() to handle migration/hwpoisoned entry

commit 4a705fef986231a3e7a6b1a6d3c37025f021f49f upstream.

There's a race between fork() and hugepage migration, as a result we try
to "dereference" a swap entry as a normal pte, causing kernel panic.
The cause of the problem is that copy_hugetlb_page_range() can't handle
"swap entry" family (migration entry and hwpoisoned entry) so let's fix
it.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sym53c8xx_2: Set DID_REQUEUE return code when aborting squeue

commit fd1232b214af43a973443aec6a2808f16ee5bf70 upstream.

This patch fixes I/O errors with the sym53c8xx_2 driver when the disk
returns QUEUE FULL status.

When the controller encounters an error (including QUEUE FULL or BUSY
status), it aborts all not yet submitted requests in the function
sym_dequeue_from_squeue.

This function aborts them with DID_SOFT_ERROR.

If the disk has full tag queue, the request that caused the overflow is
aborted with QUEUE FULL status (and the scsi midlayer properly retries
it until it is accepted by the disk), but the sym53c8xx_2 driver aborts
the following requests with DID_SOFT_ERROR --- for them, the midlayer
does just a few retries and then signals the error up to sd.

The result is that disk returning QUEUE FULL causes request failures.

The error was reproduced on 53c895 with COMPAQ BD03685A24 disk
(rebranded ST336607LC) with command queue 48 or 64 tags.  The disk has
64 tags, but under some access patterns it return QUEUE FULL when there
are less than 64 pending tags.  The SCSI specification allows returning
QUEUE FULL anytime and it is up to the host to retry.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/video/fbdev/fb-puv3.c: Add header files for function unifb_mmap

commit fbc6c4a13bbfb420eedfdb26a0a859f9c07e8a7b upstream.

Function unifb_mmap calls functions which are defined in linux/mm.h
and asm/pgtable.h

The related error (for unicore32 with unicore32_defconfig):
CC      drivers/video/fbdev/fb-puv3.o
drivers/video/fbdev/fb-puv3.c: In function 'unifb_mmap':
drivers/video/fbdev/fb-puv3.c:646: error: implicit declaration of
      function 'vm_iomap_memory'
drivers/video/fbdev/fb-puv3.c:646: error: implicit declaration of
      function 'pgprot_noncached'

Signed-off-by: Zhichuang Sun <sunzc522@gmail.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joe Perches <joe@perches.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-fbdev@vger.kernel.org
Acked-by: Xuetao Guan <gxt@mprc.pku.edu.cn>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/unicore32/mm/alignment.c: include "asm/pgtable.h" to avoid compiling error

commit 1ff38c56cbd095c4c0dfa581a859ba3557830f78 upstream.

Need include "asm/pgtable.h" to include "asm-generic/pgtable-nopmd.h",
so can let 'pmd_t' defined. The related error with allmodconfig:

    CC      arch/unicore32/mm/alignment.o
  In file included from arch/unicore32/mm/alignment.c:24:
  arch/unicore32/include/asm/tlbflush.h:135: error: expected .). before .*. token
  arch/unicore32/include/asm/tlbflush.h:154: error: expected .). before .*. token
  In file included from arch/unicore32/mm/alignment.c:27:
  arch/unicore32/mm/mm.h:15: error: expected .=., .,., .;., .sm. or ._attribute__. before .*. token
  arch/unicore32/mm/mm.h:20: error: expected .=., .,., .;., .sm. or ._attribute__. before .*. token
  arch/unicore32/mm/mm.h:25: error: expected .=., .,., .;., .sm. or ._attribute__. before .*. token
  make[1]: *** [arch/unicore32/mm/alignment.o] Error 1
  make: *** [arch/unicore32/mm] Error 2

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Acked-by: Xuetao Guan <gxt@mprc.pku.edu.cn>
Signed-off-by: Xuetao Guan <gxt@mprc.pku.edu.cn>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Prevent printk ratelimiting from spamming kernel log while DEBUG not defined

commit b7a7723513dc89f83d6df13206df55d4dc26e825 upstream.

This (widely used) construction:

if(printk_ratelimit())
dev_dbg()

Causes the ratelimiting to spam the kernel log with the "callbacks suppressed"
message below, even while the dev_dbg it is supposed to rate limit wouldn't
print anything because DEBUG is not defined for this device.

[  533.803964] retire_playback_urb: 852 callbacks suppressed
[  538.807930] retire_playback_urb: 852 callbacks suppressed
[  543.811897] retire_playback_urb: 852 callbacks suppressed
[  548.815745] retire_playback_urb: 852 callbacks suppressed
[  553.819826] retire_playback_urb: 852 callbacks suppressed

So use dev_dbg_ratelimited() instead of this construction.

Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Suppress repetitive debug messages from retire_playback_urb()

commit a5065eb6da55b226661456e6a7435f605df98111 upstream.

BugLink: http://bugs.launchpad.net/bugs/1305133
Malfunctioning or slow devices can cause a flood of dmesg SPAM.

I've ignored checkpatch.pl complaints about the use of printk_ratelimit() in favour
of prior art in sound/usb/pcm.c.

WARNING: Prefer printk_ratelimited or pr_<level>_ratelimited to printk_ratelimit
+ if (printk_ratelimit() &&

Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Eldad Zack <eldad@fogrefinery.com>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_dw: Fix LCR workaround regression

commit 6979f8d28049879e6147767d93ba6732c8bd94f4 upstream.

Commit c49436b657d0 (serial: 8250_dw: Improve unwritable LCR workaround)
caused a regression. It added a check that the LCR was written properly
to detect and workaround the busy quirk, but the behaviour of bit 5
(UART_LCR_SPAR) differs between IP versions 3.00a and 3.14c per the
docs. On older versions this caused the check to fail and it would
repeatedly force idle and rewrite the LCR register, causing delays and
preventing any input from serial being received.

This is fixed by masking out UART_LCR_SPAR before making the comparison.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Tim Kryger <tim.kryger@linaro.org>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Cc: Matt Porter <matt.porter@linaro.org>
Cc: Markus Mayer <markus.mayer@linaro.org>
Tested-by: Tim Kryger <tim.kryger@linaro.org>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_dw: Improve unwritable LCR workaround

commit c49436b657d0a56a6ad90d14a7c3041add7cf64d upstream.

When configured with UART_16550_COMPATIBLE=NO or in versions prior to
the introduction of this option, the Designware UART will ignore writes
to the LCR if the UART is busy.  The current workaround saves a copy of
the last written LCR and re-writes it in the ISR for a special interrupt
that is raised when a write was ignored.

Unfortunately, interrupts are typically disabled prior to performing a
sequence of register writes that include the LCR so the point at which
the retry occurs is too late.  An example is serial8250_do_set_termios()
where an ignored LCR write results in the baud divisor not being set and
instead a garbage character is sent out the transmitter.

Furthermore, since serial_port_out() offers no way to indicate failure,
a serious effort must be made to ensure that the LCR is actually updated
before returning back to the caller.  This is difficult, however, as a
UART that was busy during the first attempt is likely to still be busy
when a subsequent attempt is made unless some extra action is taken.

This updated workaround reads back the LCR after each write to confirm
that the new value was accepted by the hardware.  Should the hardware
ignore a write, the TX/RX FIFOs are cleared and the receive buffer read
before attempting to rewrite the LCR out of the hope that doing so will
force the UART into an idle state.  While this may seem unnecessarily
aggressive, writes to the LCR are used to change the baud rate, parity,
stop bit, or data length so the data that may be lost is likely not
important.  Admittedly, this is far from ideal but it seems to be the
best that can be done given the hardware limitations.

Lastly, the revised workaround doesn't touch the LCR in the ISR, so it
avoids the possibility of a "serial8250: too much work for irq" lock up.
This problem is rare in real situations but can be reproduced easily by
wiring up two UARTs and running the following commands.

  # stty -F /dev/ttyS1 echo
  # stty -F /dev/ttyS2 echo
  # cat /dev/ttyS1 &
  [1] 375
  # echo asdf > /dev/ttyS1
  asdf

  [   27.700000] serial8250: too much work for irq96
  [   27.700000] serial8250: too much work for irq96
  [   27.710000] serial8250: too much work for irq96
  [   27.710000] serial8250: too much work for irq96
  [   27.720000] serial8250: too much work for irq96
  [   27.720000] serial8250: too much work for irq96
  [   27.730000] serial8250: too much work for irq96
  [   27.730000] serial8250: too much work for irq96
  [   27.740000] serial8250: too much work for irq96

Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
[wangnan: backport to 3.10.43:
  - adjust context
  - remove unneeded local var]
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_dw: Report CTS asserted for auto flow

commit 33acbb82695f84e9429c1f7fbdeb4588dea12ffa upstream.

When a serial port is configured for RTS/CTS flow control, serial core
will disable the transmitter if it observes CTS is de-asserted. This is
perfectly reasonable and appropriate when the UART lacks the ability to
automatically perform CTS flow control.

However, if the UART hardware can manage flow control automatically, it
is important that software not get involved.  When the DesignWare UART
enables 16C750 style auto-RTS/CTS it stops generating interrupts for
changes in CTS state so software mostly stays out of the way.  However,
it does report the true state of CTS in the MSR so software may notice
it is de-asserted and respond by improperly disabling the transmitter.
Once this happens the transmitter will be blocked forever.

To avoid this situation, we simply lie to the 8250 and serial core by
reporting that CTS is asserted whenever auto-RTS/CTS mode is enabled.

Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Cc: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: rtsx: add R1-no-CRC mmc command type handle

commit 5027251eced6e34315a52bd841279df957f627bb upstream.

a27fbf2f067b0cd ("mmc: add ignorance case for CMD13 CRC error") produced
a cmd.flags unhandled in realtek pci host driver.  This will make MMC
card fail to initialize, this patch is used to handle the new cmd.flags
condition and MMC card can be used.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip: spear_shirq: Fix interrupt offset

commit 4f4366033945419b0c52118c29d3057d7c558765 upstream.

The ras3 block on spear320 claims to have 3 interrupts. In fact it has
one and 6 reserved interrupts. Account the 6 reserved to this block so
it has 7 interrupts total. That matches the datasheet and the device
tree entries.

Broken since commit 80515a5a(ARM: SPEAr3xx: shirq: simplify and move
the shared irq multiplexor to DT). Testing is overrated....

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20140619212712.872379208@linutronix.de
Fixes: 80515a5a2e3c ('ARM: SPEAr3xx: shirq: simplify and move the shared irq multiplexor to DT')
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: flush writes before starting a recovery.

commit 133d4527eab8d199a62eee6bd433f0776842df2e upstream.

When we write to a degraded array which has a bitmap, we
make sure the relevant bit in the bitmap remains set when
the write completes (so a 're-add' can quickly rebuilt a
temporarily-missing device).

If, immediately after such a write starts, we incorporate a spare,
commence recovery, and skip over the region where the write is
happening (because the 'needs recovery' flag isn't set yet),
then that write will not get to the new device.

Once the recovery finishes the new device will be trusted, but will
have incorrect data, leading to possible corruption.

We cannot set the 'needs recovery' flag when we start the write as we
do not know easily if the write will be "degraded" or not.  That
depends on details of the particular raid level and particular write
request.

This patch fixes a corruption issue of long standing and so it
suitable for any -stable kernel.  It applied correctly to 3.0 at
least and will minor editing to earlier kernels.

Reported-by: Bill <billstuff2001@sbcglobal.net>
Tested-by: Bill <billstuff2001@sbcglobal.net>
Link: http://lkml.kernel.org/r/53A518BB.60709@sbcglobal.net
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Remove ftrace_stop/start() from reading the trace file

commit 099ed151675cd1d2dbeae1dac697975f6a68716d upstream.

Disabling reading and writing to the trace file should not be able to
disable all function tracing callbacks. There's other users today
(like kprobes and perf). Reading a trace file should not stop those
from happening.

Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools: ffs-test: fix header values endianess

commit f35f71244da6e51db4e1f2c7e318581f498ececf upstream.

It appears that no one ever run ffs-test on a big-endian machine,
since it used cpu-endianess for fs_count and hs_count fields which
should be in little-endian format.  Fix by wrapping the numbers in
cpu_to_le32.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: fix rare symlink decoding bug

commit 76f47128f9b33af1e96819746550d789054c9664 upstream.

An NFS operation that creates a new symlink includes the symlink data,
which is xdr-encoded as a length followed by the data plus 0 to 3 bytes
of zero-padding as required to reach a 4-byte boundary.

The vfs, on the other hand, wants null-terminated data.

The simple way to handle this would be by copying the data into a newly
allocated buffer with space for the final null.

The current nfsd_symlink code tries to be more clever by skipping that
step in the (likely) case where the byte following the string is already
0.

But that assumes that the byte following the string is ours to look at.
In fact, it might be the first byte of a page that we can't read, or of
some object that another task might modify.

Worse, the NFSv4 code tries to fix the problem by actually writing to
that byte.

In the NFSv2/v3 cases this actually appears to be safe:

- nfs3svc_decode_symlinkargs explicitly null-terminates the data
  (after first checking its length and copying it to a new
  page).
- NFSv2 limits symlinks to 1k.  The buffer holding the rpc
  request is always at least a page, and the link data (and
  previous fields) have maximum lengths that prevent the request
  from reaching the end of a page.

In the NFSv4 case the CREATE op is potentially just one part of a long
compound so can end up on the end of a page if you're unlucky.

The minimal fix here is to copy and null-terminate in the NFSv4 case.
The nfsd_symlink() interface here seems too fragile, though.  It should
really either do the copy itself every time or just require a
null-terminated string.

Reported-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: of_iio_channel_get_by_name() returns non-null pointers for error legs

commit a2c12493ed7e63a18cef33a71686d12ffcd6600e upstream.

Currently in the inkern.c code for IIO framework, the function
of_iio_channel_get_by_name() will return a non-NULL pointer when
it cannot find a channel using of_iio_channel_get() and when it
tries to search for 'io-channel-ranges' property and fails. This
is incorrect behaviour as the function which calls this expects
a NULL pointer for failure. This patch rectifies the issue.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: preserve the high 32-bits of the PAT register

commit 7cb060a91c0efc5ff94f83c6df3ed705e143cdb9 upstream.

KVM does not really do much with the PAT, so this went unnoticed for a
long time.  It is exposed however if you try to do rdmsr on the PAT
register.

Reported-by: Valentine Sinitsyn <valentine.sinitsyn@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Increase the number of fixed MTRR regs to 10

commit 682367c494869008eb89ef733f196e99415ae862 upstream.

Recent Intel CPUs have 10 variable range MTRRs. Since operating systems
sometime make assumptions on CPUs while they ignore capability MSRs, it is
better for KVM to be consistent with recent CPUs. Reporting more MTRRs than
actually supported has no functional implications.

Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: Fix hole punching for files with indirect blocks

commit a93cd4cf86466caa49cfe64607bea7f0bde3f916 upstream.

Hole punching code for files with indirect blocks wrongly computed
number of blocks which need to be cleared when traversing the indirect
block tree. That could result in punching more blocks than actually
requested and thus effectively cause a data loss. For example:

fallocate -n -p 10240000 4096

will punch the range 10240000 - 12632064 instead of the range 1024000 -
10244096. Fix the calculation.

Fixes: 8bad6fc813a3a5300f51369c39d315679fd88c72
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: Fix buffer double free in ext4_alloc_branch()

commit c5c7b8ddfbf8cb3b2291e515a34ab1b8982f5a2d upstream.

Error recovery in ext4_alloc_branch() calls ext4_forget() even for
buffer corresponding to indirect block it did not allocate. This leads
to brelse() being called twice for that buffer (once from ext4_forget()
and once from cleanup in ext4_ind_map_blocks()) leading to buffer use
count misaccounting. Eventually (but often much later because there
are other users of the buffer) we will see messages like:
VFS: brelse: Trying to free free buffer

Another manifestation of this problem is an error:
JBD2 unexpected failure: jbd2_journal_revoke: !buffer_revoked(bh);
inconsistent data on disk

The fix is easy - don't forget buffer we did not allocate. Also add an
explanatory comment because the indexing at ext4_alloc_branch() is
somewhat subtle.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: fix mount failure with broken pathnames when smb3 mount with mapchars option

commit ce36d9ab3bab06b7b5522f5c8b68fac231b76ffb upstream.

When we SMB3 mounted with mapchars (to allow reserved characters : \ / > < * ?
via the Unicode Windows to POSIX remap range) empty paths
(eg when we open "" to query the root of the SMB3 directory on mount) were not
null terminated so we sent garbarge as a path name on empty paths which caused
SMB2/SMB2.1/SMB3 mounts to fail when mapchars was specified.  mapchars is
particularly important since Unix Extensions for SMB3 are not supported (yet)

Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

b43: fix frequency reported on G-PHY with /new/ firmware

commit 2fc68eb122c7ea6cd5be1fe7d6650c0beb2f4f40 upstream.

Support for firmware rev 508+ was added years ago, but we never noticed
it reports channel in a different way for G-PHY devices. Instead of
offset from 2400 MHz it simply passes channel id (AKA hw_value).

So far it was (most probably) affecting monitor mode users only, but
the following recent commit made it noticeable for quite everybody:

commit 3afc2167f60a327a2c1e1e2600ef209a3c2b75b7
Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date:   Tue Mar 4 16:50:13 2014 +0200

    cfg80211/mac80211: ignore signal if the frame was heard on wrong channel

Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Bug fix in stack alignment exception

commit 3906c2b53cd23c2ae03e6ce41432c8e7f0a3cbbb upstream.

The value of ESR has been stored into x1, and should be directly pass to
do_sp_pc_abort function, "MOV x1, x25" is an extra operation and do_sp_pc_abort
will get the wrong value of ESR.

Signed-off-by: ChiaHao <andy.jhshiu@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP2+: Fix parser-bug in platform muxing code

commit c021f241f4fab2bb4fc4120a38a828a03dd3f970 upstream.

Fix a parser-bug in the omap2 muxing code where muxtable-entries will be
wrongly selected if the requested muxname is a *prefix* of their
m0-entry and they have a matching mN-entry. Fix by additionally checking
that the length of the m0_entry is equal.

For example muxing of "dss_data2.dss_data2" on omap32xx will fail
because the prefix "dss_data2" will match the mux-entries "dss_data2" as
well as "dss_data20", with the suffix "dss_data2" matching m0 (for
dss_data2) and m4 (for dss_data20). Thus both are recognized as signal
path candidates:

Relevant muxentries from mux34xx.c:
        _OMAP3_MUXENTRY(DSS_DATA20, 90,
                "dss_data20", NULL, "mcspi3_somi", "dss_data2",
                "gpio_90", NULL, NULL, "safe_mode"),
        _OMAP3_MUXENTRY(DSS_DATA2, 72,
                "dss_data2", NULL, NULL, NULL,
                "gpio_72", NULL, NULL, "safe_mode"),

This will result in a failure to mux the pin at all:

 _omap_mux_get_by_name: Multiple signal paths (2) for dss_data2.dss_data2

Patch should apply to linus' latest master down to rather old linux-2.6
trees.

Signed-off-by: David R. Piegdon <lkml@p23q.org>
Cc: stable@vger.kernel.org
[tony@atomide.com: updated description to include full description]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: pcie: try to get ownership several times

commit 501fd9895c1d7d8161ed56698ae2fccb10ef14f5 upstream.

Some races with the hardware can happen when we take
ownership of the device. Don't give up after the first try.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix a memory leak on sta rate selection table

commit 53d045258ee2e38b1e882617cb0799a04d05f5fa upstream.

If the rate control algorithm uses a selection table, it
is leaked when the station is destroyed - fix that.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Reported-by: Christophe Prévotaux <cprevotaux@nltinc.com>
Fixes: 0d528d85c519 ("mac80211: improve the rate control API")
[add commit log entry, remove pointless NULL check]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: don't check netdev state for debugfs read/write

commit 923eaf367206e01f22c97aee22300e332d071916 upstream.

Doing so will lead to an oops for a p2p-dev interface, since it has
no netdev.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (ina2xx) Cast to s16 on shunt and current regs

commit c0214f98943b1fe43f7be61b7782b0c8f0836f28 upstream.

All devices supported by ina2xx are bidirectional and report the
measured shunt voltage and power values as a signed 16 bit, but the
current driver implementation caches all registers as u16, leading
to an incorrect sign extension when reporting to userspace in
ina2xx_get_value().

This patch fixes the problem by casting the signed registers to s16.
Tested on an INA219.

Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rbd: handle parent_overlap on writes correctly

commit 9638556a276125553549fdfe349c464481ec2f39 upstream.

The following check in rbd_img_obj_request_submit()

    rbd_dev->parent_overlap <= obj_request->img_offset

allows the fall through to the non-layered write case even if both
parent_overlap and obj_request->img_offset belong to the same RADOS
object.  This leads to data corruption, because the area to the left of
parent_overlap ends up unconditionally zero-filled instead of being
populated with parent data.  Suppose we want to write 1M to offset 6M
of image bar, which is a clone of foo@snap; object_size is 4M,
parent_overlap is 5M:

    rbd_data.<id>.0000000000000001
     ---------------------|----------------------|------------
    | should be copyup'ed | should be zeroed out | write ...
     ---------------------|----------------------|------------
   4M                    5M                     6M
                    parent_overlap    obj_request->img_offset

4..5M should be copyup'ed from foo, yet it is zero-filled, just like
5..6M is.

Given that the only striping mode kernel client currently supports is
chunking (i.e. stripe_unit == object_size, stripe_count == 1), round
parent_overlap up to the next object boundary for the purposes of the
overlap check.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rbd: use reference counts for image requests

commit 0f2d5be792b0466b06797f637cfbb0f64dbb408c upstream.

Each image request contains a reference count, but to date it has
not actually been used.  (I think this was just an oversight.) A
recent report involving rbd failing an assertion shed light on why
and where we need to use these reference counts.

Every OSD request associated with an object request uses
rbd_osd_req_callback() as its callback function.  That function will
call a helper function (dependent on the type of OSD request) that
will set the object request's "done" flag if the object request if
appropriate.  If that "done" flag is set, the object request is
passed to rbd_obj_request_complete().

In rbd_obj_request_complete(), requests are processed in sequential
order.  So if an object request completes before one of its
predecessors in the image request, the completion is deferred.
Otherwise, if it's a completing object's "turn" to be completed, it
is passed to rbd_img_obj_end_request(), which records the result of
the operation, accumulates transferred bytes, and so on.  Next, the
successor to this request is checked and if it is marked "done",
(deferred) completion processing is performed on that request, and
so on.  If the last object request in an image request is completed,
rbd_img_request_complete() is called, which (typically) destroys
the image request.

There is a race here, however.  The instant an object request is
marked "done" it can be provided (by a thread handling completion of
one of its predecessor operations) to rbd_img_obj_end_request(),
which (for the last request) can then lead to the image request
getting torn down.  And this can happen *before* that object has
itself entered rbd_img_obj_end_request().  As a result, once it
*does* enter that function, the image request (and even the object
request itself) may have been freed and become invalid.

All that's necessary to avoid this is to properly count references
to the image requests.  We tear down an image request's object
requests all at once--only when the entire image request has
completed.  So there's no need for an image request to count
references for its object requests.  However, we don't want an
image request to go away until the last of its object requests
has passed through rbd_img_obj_callback().  In other words,
we don't want rbd_img_request_complete() to necessarily
result in the image request being destroyed, because it may
get called before we've finished processing on all of its
object requests.

So the fix is to add a reference to an image request for
each of its object requests.  The reference can be viewed
as representing an object request that has not yet finished
its call to rbd_img_obj_callback().  That is emphasized by
getting the reference right after assigning that as the image
object's callback function.  The corresponding release of that
reference is done at the end of rbd_img_obj_callback(), which
every image object request passes through exactly once.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm thin: update discard_granularity to reflect the thin-pool blocksize

commit 09869de57ed2728ae3c619803932a86cb0e2c4f8 upstream.

DM thinp already checks whether the discard_granularity of the data
device is a factor of the thin-pool block size.  But when using the
dm-thin-pool's discard passdown support, DM thinp was not selecting the
max of the underlying data device's discard_granularity and the
thin-pool's block size.

Update set_discard_limits() to set discard_granularity to the max of
these values.  This enables blkdev_issue_discard() to properly align the
discards that are sent to the DM thin device on a full block boundary.
As such each discard will now cover an entire DM thin-pool block and the
block will be reclaimed.

Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix locking of hdev when calling into SMP code

commit c73f94b8c093a615ce80eabbde0ac6eb9abfe31a upstream.

The SMP code expects hdev to be unlocked since e.g. crypto functions
will try to (re)lock it. Therefore, we need to release the lock before
calling into smp.c from mgmt.c. Without this we risk a deadlock whenever
the smp_user_confirm_reply() function is called.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Tested-by: Lukasz Rymanowski <lukasz.rymanowski@tieto.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix check for connection encryption

commit e694788d73efe139b24f78b036deb97fe57fa8cb upstream.

The conn->link_key variable tracks the type of link key in use. It is
set whenever we respond to a link key request as well as when we get a
link key notification event.

These two events do not however always guarantee that encryption is
enabled: getting a link key request and responding to it may only mean
that the remote side has requested authentication but not encryption. On
the other hand, the encrypt change event is a certain guarantee that
encryption is enabled. The real encryption state is already tracked in
the conn->link_mode variable through the HCI_LM_ENCRYPT bit.

This patch fixes a check for encryption in the hci_conn_auth function to
use the proper conn->link_mode value and thereby eliminates the chance
of a false positive result.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix SSP acceptor just-works confirmation without MITM

commit ba15a58b179ed76a7e887177f2b06de12c58ec8f upstream.

From the Bluetooth Core Specification 4.1 page 1958:

"if both devices have set the Authentication_Requirements parameter to
one of the MITM Protection Not Required options, authentication stage 1
shall function as if both devices set their IO capabilities to
DisplayOnly (e.g., Numeric comparison with automatic confirmation on
both devices)"

So far our implementation has done user confirmation for all just-works
cases regardless of the MITM requirements, however following the
specification to the word means that we should not be doing confirmation
when neither side has the MITM flag set.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Tested-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Fix incorrect write to read-only register v2:

commit 4e578080ed3262ed2c3985868539bc66218d25c0 upstream.

Commit "drm/vmwgfx: correct fb_fix_screeninfo.line_length", while fixing a
vmwgfx fbdev bug, also writes the pitch to a supposedly read-only register:
SVGA_REG_BYTES_PER_LINE, while it should be (and also in fact is) written to
SVGA_REG_PITCHLOCK.

This patch is Cc'd stable because of the unknown effects writing to this
register might have, particularly on older device versions.

v2: Updated log message.

Cc: Christopher Friedt <chrisfriedt@gmail.com>
Tested-by: Christopher Friedt <chrisfriedt@gmail.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: don't allow RADEON_GEM_DOMAIN_CPU for command submission

commit ec65da385d46f63740c1c9230b891a6dcbd64c71 upstream.

It hangs the hardware.

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon/atom: fix dithering on certain panels

commit 642528355c694f5ed68f6bff9ff520326a249f99 upstream.

We need to specify the encoder mode as LVDS for eDP
when using the Crtc_Source atom table in order to properly
set up the FMT hardware.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=73911

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon/dp: fix lane/clock setup for dp 1.2 capable devices

commit 3b6d9fd23e015b5397c438fd3cd74147d2c805b6 upstream.

Only DCE5+ asics support DP 1.2.

Noticed by ArtForz on IRC.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: fix typo in radeon_connector_is_dp12_capable()

commit af5d36539dfe043f1cf0f8b7334d6bb12cd14e75 upstream.

We were checking the ext clock rather than the display clock.

Noticed by ArtForz on IRC.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: only apply hdmi bpc pll flags when encoder mode is hdmi

commit 7d5ab3009a8ca777174f6f469277b3922d56fd4b upstream.

May fix display issues with non-HDMI displays.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: nand: omap: fix BCHx ecc.correct to return detected bit-flips in erased-page

commit f306e8c3b667632952f1a4a74ffb910bbc06255f upstream.

fixes: commit 62116e5171e00f85a8d53f76e45b84423c89ff34
       mtd: nand: omap2: Support for hardware BCH error correction.

In omap_elm_correct_data(), if bitflip_count in an erased-page is within the
correctable limit (< ecc.strength), then it is not indicated back to the caller
ecc->read_page().

This mis-guides upper layers like MTD and UBIFS layer to assume erased-page as
perfectly clean and use it for writing even if actual bitflip_count was
dangerously high (bitflip_count > mtd->bitflip_threshold).

This patch fixes this above issue, by returning 'stats' to caller
ecc->read_page() under all scenarios.

Reported-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: eLBC NAND: fix subpage write support

commit f034d87def51f026b735d1e2877e9387011b2ba3 upstream.

As subpage write is enabled by default for all drivers, nand_write_subpage_hwecc
causes a crash if the driver did not register ecc->hwctl or ecc->calculate.
This behavior was introduced in
   commit 837a6ba4f3b6d23026674e6af6b6849a4634fff9
   "mtd: nand: subpage write support for hardware based ECC schemes".

This fixes a crash by emulating subpage write support by padding sub-page data
with 0xff on either sides to make it full page compatible.

Reported-by: Helmut Schaa <helmut.schaa@googlemail.com>
Tested-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Pekon Gupta <pekon@ti.com>
Reviewed-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rt2x00: fix rfkill regression on rt2500pci

commit 616a8394b5df8c88f4dd416f4527439a4e365034 upstream.

As reported by Niels, starting rfkill polling during device probe
(commit e2bc7c5, generally sane change) broke rfkill on rt2500pci
device. I considered that bug as some initalization issue, which
should be fixed on rt2500pci specific code. But after several
attempts (see bug report for details) we fail to find working solution.
Hence I decided to revert to old behaviour on rt2500pci to fix
regression.

Additionally patch also unregister rfkill on device remove instead
of ifconfig down, what was another issue introduced by bad commit.

Bug report:
https://bugzilla.kernel.org/show_bug.cgi?id=73821

Fixes: e2bc7c5f3cb8 ("rt2x00: Fix rfkill_polling register function.")
Bisected-by: Niels <nille0386@googlemail.com>
Reported-and-tested-by: Niels <nille0386@googlemail.com>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rt2x00: disable TKIP on USB

commit 8edcb0ba0d56f5914eef11eda6db8bfe74eb9ca8 upstream.

On USB we can not get atomically TKIP key. We have to disable support
for TKIP acceleration on USB hardware to avoid bug as showed bellow.

[  860.827243] BUG: scheduling while atomic: hostapd/3397/0x00000002
<snip>
[  860.827280] Call Trace:
[  860.827282]  [<ffffffff81682ea6>] dump_stack+0x4d/0x66
[  860.827284]  [<ffffffff8167eb9b>] __schedule_bug+0x47/0x55
[  860.827285]  [<ffffffff81685bb3>] __schedule+0x733/0x7b0
[  860.827287]  [<ffffffff81685c59>] schedule+0x29/0x70
[  860.827289]  [<ffffffff81684f8a>] schedule_timeout+0x15a/0x2b0
[  860.827291]  [<ffffffff8105ac50>] ? ftrace_raw_event_tick_stop+0xc0/0xc0
[  860.827294]  [<ffffffff810c13c2>] ? __module_text_address+0x12/0x70
[  860.827296]  [<ffffffff81686823>] wait_for_completion_timeout+0xb3/0x140
[  860.827298]  [<ffffffff81080fc0>] ? wake_up_state+0x20/0x20
[  860.827301]  [<ffffffff814d5b3d>] usb_start_wait_urb+0x7d/0x150
[  860.827303]  [<ffffffff814d5cd5>] usb_control_msg+0xc5/0x110
[  860.827305]  [<ffffffffa02fb0c6>] rt2x00usb_vendor_request+0xc6/0x160  [rt2x00usb]
[  860.827307]  [<ffffffffa02fb215>] rt2x00usb_vendor_req_buff_lock+0x75/0x150 [rt2x00usb]
[  860.827309]  [<ffffffffa02fb393>] rt2x00usb_vendor_request_buff+0xa3/0xe0 [rt2x00usb]
[  860.827311]  [<ffffffffa023d1a3>] rt2x00usb_register_multiread+0x33/0x40 [rt2800usb]
[  860.827314]  [<ffffffffa05805f9>] rt2800_get_tkip_seq+0x39/0x50  [rt2800lib]
[  860.827321]  [<ffffffffa0480f88>] ieee80211_get_key+0x218/0x2a0  [mac80211]
[  860.827322]  [<ffffffff815cc68c>] ? __nlmsg_put+0x6c/0x80
[  860.827329]  [<ffffffffa051b02e>] nl80211_get_key+0x22e/0x360 [cfg80211]

Reported-and-tested-by: Peter Wu <lekensteyn@gmail.com>
Reported-and-tested-by: Pontus Fuchs <pontus.fuchs@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_fs: fix NULL pointer dereference when there are no strings

commit f0688c8b81d2ea239c3fb0b848f623b579238d99 upstream.

If the descriptors do not need any strings and user space sends empty
set of strings, the ffs->stringtabs field remains NULL.  Thus
*ffs->stringtabs in functionfs_bind leads to a NULL pointer
dereferenece.

The bug was introduced by commit [fd7c9a007f: “use usb_string_ids_n()”].

While at it, remove double initialisation of lang local variable in
that function.

ffs->strings_count does not need to be checked in any way since in
the above scenario it will remain zero and usb_string_ids_n() is
a no-operation when colled with 0 argument.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: ftdi_sio: fix null deref at port probe

commit aea1ae8760314e072bf1b773521e9de5d5dda10d upstream.

Fix NULL-pointer dereference when probing an interface with no
endpoints.

These devices have two bulk endpoints per interface, but this avoids
crashing the kernel if a user forces a non-FTDI device to be probed.

Note that the iterator variable was made unsigned in order to avoid
a maybe-uninitialized compiler warning for ep_desc after the loop.

Fixes: 895f28badce9 ("USB: ftdi_sio: fix hi-speed device packet size
calculation")

Reported-by: Mike Remski <mremski@mutualink.net>
Tested-by: Mike Remski <mremski@mutualink.net>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: option: add/modify Olivetti Olicard modems

commit b0ebef36e93703e59003ad6a1a20227e47714417 upstream.

Adding a couple of Olivetti modems and blacklisting the net
function on a couple which are already supported.

Reported-by: Lars Melin <larsm17@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: option: add device ID for SpeedUp SU9800 usb 3g modem

commit 1cab4c68e339086cdaff7535848e878e8f261fca upstream.

Reported by Alif Mubarak Ahmad:

This device vendor and product id is 1c9e:9800
It is working as serial interface with generic usbserial driver.
I thought it is more suitable to use usbserial option driver, which has
better capability distinguishing between modem serial interface and
micro sd storage interface.

[ johan: style changes ]

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Tested-by: Alif Mubarak Ahmad <alive4ever@live.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Fix runtime suspended xhci from blocking system suspend.

commit d6236f6d1d885aa19d1cd7317346fe795227a3cc upstream.

The system suspend flow as following:
1, Freeze all user processes and kenrel threads.

2, Try to suspend all devices.

2.1, If pci device is in RPM suspended state, then pci driver will try
to resume it to RPM active state in the prepare stage.

2.2, xhci_resume function calls usb_hcd_resume_root_hub to queue two
workqueue items to resume usb2&usb3 roothub devices.

2.3, Call suspend callbacks of devices.

2.3.1, All suspend callbacks of all hcd's children, including
roothub devices are called.

2.3.2, Finally, hcd_pci_suspend callback is called.

Due to workqueue threads were already frozen in step 1, the workqueue
items can't be scheduled, and the roothub devices can't be resumed in
this flow. The HCD_FLAG_WAKEUP_PENDING flag which is set in
usb_hcd_resume_root_hub won't be cleared. Finally,
hcd_pci_suspend will return -EBUSY, and system suspend fails.

The reason why this issue doesn't show up very often is due to that
choose_wakeup will be called in step 2.3.1. In step 2.3.1, if
udev->do_remote_wakeup is not equal to device_may_wakeup(&udev->dev), then
udev will resume to RPM active for changing the wakeup settings. This
has been a lucky hit which hides this issue.

For some special xHCI controllers which have no USB2 port, then roothub
will not match hub driver due to probe failed. Then its
do_remote_wakeup will be set to zero, and we won't be as lucky.

xhci driver doesn't need to resume roothub devices everytime like in
the above case. It's only needed when there are pending event TRBs.

This patch should be back-ported to kernels as old as 3.2, that
contains the commit f69e3120df82391a0ee8118e0a156239a06b2afb
"USB: XHCI: resume root hubs when the controller resumes"

Signed-off-by: Wang, Yu <yu.y.wang@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
[use readl() instead of removed xhci_readl(), reword commit message -Mathias]
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: correct burst count field for isoc transfers on 1.0 xhci hosts

commit 3213b151387df0b95f4eada104f68eb1c1409cb3 upstream.

The transfer burst count (TBC) field in xhci 1.0 hosts should be set
to the number of bursts needed to transfer all packets in a isoc TD.
Supported values are 0-2 (1 to 3 bursts per service interval).

Formula for TBC calculation is given in xhci spec section 4.11.2.3:
TBC = roundup( Transfer Descriptor Packet Count / Max Burst Size +1 ) - 1

This patch should be applied to stable kernels since 3.0 that contain
the commit 5cd43e33b9519143f06f507dd7cbee6b7a621885
"xhci 1.0: Set transfer burst count field."

Suggested-by: ShiChun Ma <masc2008@qq.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio-scsi: fix various bad behavior on aborted requests

commit 8faeb529b2dabb9df691d614dda18910a43d05c9 upstream.

Even though the virtio-scsi spec guarantees that all requests related
to the TMF will have been completed by the time the TMF itself completes,
the request queue's callback might not have run yet.  This causes requests
to be completed more than once, and as a result triggers a variety of
BUGs or oopses.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio-scsi: avoid cancelling uninitialized work items

commit cdda0e5acbb78f7b777049f8c27899e5c5bb368f upstream.

Calling the workqueue interface on uninitialized work items isn't a
good idea even if they're zeroed. It's not failing catastrophically only
through happy accidents.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ibmvscsi: Add memory barriers for send / receive

commit 7114aae02742d6b5c5a0d39a41deb61d415d3717 upstream.

Add a memory barrier prior to sending a new command to the VIOS
to ensure the VIOS does not receive stale data in the command buffer.
Also add a memory barrier when processing the CRQ for completed commands.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ibmvscsi: Abort init sequence during error recovery

commit 9ee755974bea2f9880e517ec985dc9dede1b3a36 upstream.

If a CRQ reset is triggered for some reason while in the middle
of performing VSCSI adapter initialization, we don't want to
call the done function for the initialization MAD commands as
this will only result in two threads attempting initialization
at the same time, resulting in failures.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.10.47

tracing: Fix syscall_*regfunc() vs copy_process() race

commit 4af4206be2bd1933cae20c2b6fb2058dbc887f7c upstream.

syscall_regfunc() and syscall_unregfunc() should set/clear
TIF_SYSCALL_TRACEPOINT system-wide, but do_each_thread() can race
with copy_process() and miss the new child which was not added to
the process/thread lists yet.

Change copy_process() to update the child's TIF_SYSCALL_TRACEPOINT
under tasklist.

Link: http://lkml.kernel.org/p/20140413185854.GB20668@redhat.com
Fixes: a871bd33a6c0 "tracing: Add syscall tracepoints"
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Try again for saved cmdline if failed due to locking

commit 379cfdac37923653c9d4242d10052378b7563005 upstream.

In order to prevent the saved cmdline cache from being filled when
tracing is not active, the comms are only recorded after a trace event
is recorded.

The problem is, a comm can fail to be recorded if the trace_cmdline_lock
is held. That lock is taken via a trylock to allow it to happen from
any context (including NMI). If the lock fails to be taken, the comm
is skipped. No big deal, as we will try again later.

But! Because of the code that was added to only record after an event,
we may not try again later as the recording is made as a oneshot per
event per CPU.

Only disable the recording of the comm if the comm is actually recorded.

Fixes: 7ffbd48d5cab "tracing: Cache comms only after an event occurred"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/SubmittingPatches: describe the Fixes: tag

commit 8401aa1f59975c03eeebd3ac6d264cbdfe9af5de upstream.

Update the SubmittingPatches process to include howto about the new
'Fixes:' tag to be used when a patch fixes an issue in a previous commit
(found by git-bisect for example).

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: ipt_ULOG: fix info leaks

commit 278f2b3e2af5f32ea1afe34fa12a2518153e6e49 upstream.

The ulog messages leak heap bytes by the means of padding bytes and
incompletely filled string arrays. Fix those by memset(0)'ing the
whole struct before filling it.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jan Tore Morken <jantore@morken.priv.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

extcon: max77693: Fix two NULL pointer exceptions on missing pdata

commit d5653f2b7304f05eeb45d84f123cf02f840b8537 upstream.

Fix NULL pointer exceptions when platform data is not supplied.

Trace of one exception:
Unable to handle kernel NULL pointer dereference at virtual address 00000008
pgd = c0004000
[00000008] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.14.0-12045-gead5dd4687a6-dirty #1628
task: eea80000 ti: eea88000 task.ti: eea88000
PC is at max77693_muic_probe+0x27c/0x528
LR is at regmap_write+0x50/0x60
pc : [<c041d1c8>]    lr : [<c02eba60>]    psr: 20000113
sp : eea89e38  ip : 00000000  fp : c098a834
r10: ee1a5a10  r9 : 00000005  r8 : c098a83c
r7 : 0000000a  r6 : c098a774  r5 : 00000005  r4 : eeb006d0
r3 : c0697bd8  r2 : 00000000  r1 : 00000001  r0 : 00000000
Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5387d  Table: 4000404a  DAC: 00000015
Process swapper/0 (pid: 1, stack limit = 0xeea88240)
Stack: (0xeea89e38 to 0xeea8a000)
9e20:                                                       c08499fc eeb006d0
9e40: 00000000 00000000 c0915f98 00000001 00000000 ee1a5a10 c098a730 c09a88b8
9e60: 00000000 c098a730 c0915f98 00000000 00000000 c02d6aa0 c02d6a88 ee1a5a10
9e80: c0a712c8 c02d54e4 00001204 c0628b00 ee1a5a10 c098a730 ee1a5a44 00000000
9ea0: eea88000 c02d57b4 00000000 c098a730 c02d5728 c02d3a24 ee813e5c eeb9d534
9ec0: c098a730 ee22f700 c097c720 c02d4b14 c08174ec c098a730 00000006 c098a730
9ee0: 00000006 c092fd30 c09b8500 c02d5df8 00000000 c093cbb8 00000006 c0008928
9f00: 000000c3 ef7fc785 00000000 ef7fc794 00000000 c08af968 00000072 eea89f30
9f20: ef7fc85e c065f198 000000c3 c003e87c 00000003 00000000 c092fd3c 00000000
9f40: c08af618 c0826d58 00000006 00000006 c0956f58 c093cbb8 00000006 c092fd30
9f60: c09b8500 000000c3 c092fd3c c08e8510 00000000 c08e8bb0 00000006 00000006
9f80: c08e8510 c0c0c0c0 00000000 c0628fac 00000000 00000000 00000000 00000000
9fa0: 00000000 c0628fb4 00000000 c000f038 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 c0c0c0c0 c0c0c0c0
[<c041d1c8>] (max77693_muic_probe) from [<c02d6aa0>] (platform_drv_probe+0x18/0x48)
[<c02d6aa0>] (platform_drv_probe) from [<c02d54e4>] (driver_probe_device+0x140/0x384)
[<c02d54e4>] (driver_probe_device) from [<c02d57b4>] (__driver_attach+0x8c/0x90)
[<c02d57b4>] (__driver_attach) from [<c02d3a24>] (bus_for_each_dev+0x54/0x88)
[<c02d3a24>] (bus_for_each_dev) from [<c02d4b14>] (bus_add_driver+0xe8/0x204)
[<c02d4b14>] (bus_add_driver) from [<c02d5df8>] (driver_register+0x78/0xf4)
[<c02d5df8>] (driver_register) from [<c0008928>] (do_one_initcall+0xc4/0x174)
[<c0008928>] (do_one_initcall) from [<c08e8bb0>] (kernel_init_freeable+0xfc/0x1c8)
[<c08e8bb0>] (kernel_init_freeable) from [<c0628fb4>] (kernel_init+0x8/0xec)
[<c0628fb4>] (kernel_init) from [<c000f038>] (ret_from_fork+0x14/0x3c)
Code: caffffe7 e59d200c e3550001 b3a05001 (e5923008)
---[ end trace 85db969ce011bde7 ]---

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: 190d7cfc8632
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: fix hw ready reset flow

commit b04ada92ffaabb868497a1fce8e4f6bf74e5488f upstream.

We cleared H_RST for H_CSR on spurious interrupt generated when ME_RDY
while cleared and not while  ME_RDY is set. The spurious interrupt
is not delivered on all platforms in this case the
driver may fail to initialize.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: read H_CSR after asserting reset

commit c40765d919d25d2d44d99c4ce39e48808f137e1e upstream.

According the spec the host should read H_CSR again
after asserting reset H_RST to ensure that reset was
read by the firmware

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ptrace,x86: force IRET path after a ptrace_stop()

commit b9cd18de4db3c9ffa7e17b0dc0ca99ed5aa4d43a upstream.

The 'sysret' fastpath does not correctly restore even all regular
registers, much less any segment registers or reflags values.  That is
very much part of why it's faster than 'iret'.

Normally that isn't a problem, because the normal ptrace() interface
catches the process using the signal handler infrastructure, which
always returns with an iret.

However, some paths can get caught using ptrace_event() instead of the
signal path, and for those we need to make sure that we aren't going to
return to user space using 'sysret'.  Otherwise the modifications that
may have been done to the register set by the tracer wouldn't
necessarily take effect.

Fix it by forcing IRET path by setting TIF_NOTIFY_RESUME from
arch_ptrace_stop_needed() which is invoked from ptrace_stop().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipvs: Fix panic due to non-linear skb

commit f44a5f45f544561302e855e7bd104e5f506ec01b upstream.

Receiving a ICMP response to an IPIP packet in a non-linear skb could
cause a kernel panic in __skb_pull.

The problem was introduced in
commit f2edb9f7706dcb2c0d9a362b2ba849efe3a97f5e ("ipvs: implement
passive PMTUD for IPIP packets").

Signed-off-by: Peter Christensen <pch@ordbogen.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: KVM: Fix memory leak on VCPU

commit 8c9eb041cf76038eb3b62ee259607eec9b89f48d upstream.

kvm_arch_vcpu_free() is called in 2 code paths:

1) kvm_vm_ioctl()
       kvm_vm_ioctl_create_vcpu()
           kvm_arch_vcpu_destroy()
               kvm_arch_vcpu_free()
2) kvm_put_kvm()
       kvm_destroy_vm()
           kvm_arch_destroy_vm()
               kvm_mips_free_vcpus()
                   kvm_arch_vcpu_free()

Neither of the paths handles VCPU free. We need to do it in
kvm_arch_vcpu_free() corresponding to the memory allocation in
kvm_arch_vcpu_create().

Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: KVM: Remove redundant NULL checks before kfree()

commit c6c0a6637f9da54f9472144d44f71cf847f92e20 upstream.

The kfree() function already NULL checks the parameter so remove the
redundant NULL checks before kfree() calls in arch/mips/kvm/.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: kvm@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Sanjay Lal <sanjayl@kymasys.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

reiserfs: call truncate_setsize under tailpack mutex

commit 22e7478ddbcb670e33fab72d0bbe7c394c3a2c84 upstream.

Prior to commit 0e4f6a791b1e (Fix reiserfs_file_release()), reiserfs
truncates serialized on i_mutex. They mostly still do, with the exception
of reiserfs_file_release. That blocks out other writers via the tailpack
mutex and the inode openers counter adjusted in reiserfs_file_open.

However, NFS will call reiserfs_setattr without having called ->open, so
we end up with a race when nfs is calling ->setattr while another
process is releasing the file. Ultimately, it triggers the
BUG_ON(inode->i_size != new_file_size) check in maybe_indirect_to_direct.

The solution is to pull the lock into reiserfs_setattr to encompass the
truncate_setsize call as well.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Add AT_HWCAP2 to indicate V.CRYPTO category support

commit dd58a092c4202f2bd490adab7285b3ff77f8e467 upstream.

The Vector Crypto category instructions are supported by current POWER8
chips, advertise them to userspace using a specific bit to properly
differentiate with chips of the same architecture level that might not
have them.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: fix typo 'CONFIG_PPC_CPU'

commit b69a1da94f3d1589d1942b5d1b384d8cfaac4500 upstream.

Commit cd64d1697cf0 ("powerpc: mtmsrd not defined") added a check for
CONFIG_PPC_CPU were a check for CONFIG_PPC_FPU was clearly intended.

Fixes: cd64d1697cf0 ("powerpc: mtmsrd not defined")
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: fix typo 'CONFIG_PMAC'

commit 6e0fdf9af216887e0032c19d276889aad41cad00 upstream.

Commit b0d278b7d3ae ("powerpc/perf_event: Reduce latency of calling
perf_event_do_pending") added a check for CONFIG_PMAC were a check for
CONFIG_PPC_PMAC was clearly intended.

Fixes: b0d278b7d3ae ("powerpc/perf_event: Reduce latency of calling perf_event_do_pending")
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: 64bit sendfile is capped at 2GB

commit 5d73320a96fcce80286f1447864c481b5f0b96fa upstream.

commit 8f9c0119d7ba (compat: fs: Generic compat_sys_sendfile
implementation) changed the PowerPC 64bit sendfile call from
sys_sendile64 to sys_sendfile.

Unfortunately this broke sendfile of lengths greater than 2G because
sys_sendfile caps at MAX_NON_LFS. Restore what we had previously which
fixes the bug.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/pseries: Fix overwritten PE state

commit 54f112a3837d4e7532bbedbbbf27c0de277be510 upstream.

In pseries_eeh_get_state(), EEH_STATE_UNAVAILABLE is always
overwritten by EEH_STATE_NOT_SUPPORT because of the missed
"break" there. The patch fixes the issue.

Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: don't halt scanning the DRC LRU list when there's an RC_INPROG entry

commit 1b19453d1c6abcfa7c312ba6c9f11a277568fc94 upstream.

Currently, the DRC cache pruner will stop scanning the list when it
hits an entry that is RC_INPROG. It's possible however for a call to
take a *very* long time. In that case, we don't want it to block other
entries from being pruned if they are expired or we need to trim the
cache to get back under the limit.

Fix the DRC cache pruner to just ignore RC_INPROG entries.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: don't try to reuse an expired DRC entry off the list

commit a0ef5e19684f0447da9ff0654a12019c484f57ca upstream.

Currently when we are processing a request, we try to scrape an expired
or over-limit entry off the list in preference to allocating a new one
from the slab.

This is unnecessarily complicated. Just use the slab layer.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS: Don't declare inode uptodate unless all attributes were checked

commit 43b6535e717d2f656f71d9bd16022136b781c934 upstream.

Fix a bug, whereby nfs_update_inode() was declaring the inode to be
up to date despite not having checked all the attributes.
The bug occurs because the temporary variable in which we cache
the validity information is 'sanitised' before reapplying to
nfsi->cache_validity.

Reported-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: getattr for FATTR4_WORD0_FILES_AVAIL needs the statfs buffer

commit 12337901d654415d9f764b5f5ba50052e9700f37 upstream.

Note nobody's ever noticed because the typical client probably never
requests FILES_AVAIL without also requesting something else on the list.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd4: fix FREE_STATEID lockowner leak

commit 48385408b45523d9a432c66292d47ef43efcbb94 upstream.

27b11428b7de ("nfsd4: remove lockowner when removing lock stateid")
introduced a memory leak.

Reported-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pNFS: Handle allocation errors correctly in filelayout_alloc_layout_hdr()

commit 6df200f5d5191bdde4d2e408215383890f956781 upstream.

Return the NULL pointer when the allocation fails.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SUNRPC: Fix a module reference leak in svc_handle_xprt

commit c789102c20bbbdda6831a273e046715be9d6af79 upstream.

If the accept() call fails, we need to put the module reference.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/umad: Fix use-after-free on close

commit 60e1751cb52cc6d1ae04b6bd3c2b96e770b5823f upstream.

Avoid that closing /dev/infiniband/umad<n> or /dev/infiniband/issm<n>
triggers a use-after-free.  __fput() invokes f_op->release() before it
invokes cdev_put().  Make sure that the ib_umad_device structure is
freed by the cdev_put() call instead of f_op->release().  This avoids
that changing the port mode from IB into Ethernet and back to IB
followed by restarting opensmd triggers the following kernel oops:

    general protection fault: 0000 [#1] PREEMPT SMP
    RIP: 0010:[<ffffffff810cc65c>]  [<ffffffff810cc65c>] module_put+0x2c/0x170
    Call Trace:
     [<ffffffff81190f20>] cdev_put+0x20/0x30
     [<ffffffff8118e2ce>] __fput+0x1ae/0x1f0
     [<ffffffff8118e35e>] ____fput+0xe/0x10
     [<ffffffff810723bc>] task_work_run+0xac/0xe0
     [<ffffffff81002a9f>] do_notify_resume+0x9f/0xc0
     [<ffffffff814b8398>] int_signal+0x12/0x17

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=75051
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>