Andrei Vagin [Tue, 10 Apr 2018 23:30:44 +0000 (16:30 -0700)]
procfs: add seq_put_hex_ll to speed up /proc/pid/maps
seq_put_hex_ll() prints a number in hexadecimal notation and works
faster than seq_printf().
== test.py
num = 0
with open("/proc/1/maps") as f:
while num < 10000 :
data = f.read()
f.seek(0, 0)
num = num + 1
==
== Before patch ==
$ time python test.py
real 0m1.561s
user 0m0.257s
sys 0m1.302s
== After patch ==
$ time python test.py
real 0m0.986s
user 0m0.279s
sys 0m0.707s
$ perf -g record python test.py:
== Before patch ==
- 67.42% 2.82% python [kernel.kallsyms] [k] show_map_vma.isra.22
- 64.60% show_map_vma.isra.22
- 44.98% seq_printf
- seq_vprintf
- vsnprintf
+ 14.85% number
+ 12.22% format_decode
5.56% memcpy_erms
+ 15.06% seq_path
+ 4.42% seq_pad
+ 2.45% __GI___libc_read
== After patch ==
- 47.35% 3.38% python [kernel.kallsyms] [k] show_map_vma.isra.23
- 43.97% show_map_vma.isra.23
+ 20.84% seq_path
- 15.73% show_vma_header_prefix
10.55% seq_put_hex_ll
+ 2.65% seq_put_decimal_ull
0.95% seq_putc
+ 6.96% seq_pad
+ 2.94% __GI___libc_read
[avagin@openvz.org: use unsigned int instead of int where it is suitable]
Link: http://lkml.kernel.org/r/20180214025619.4005-1-avagin@openvz.org
[avagin@openvz.org: v2]
Link: http://lkml.kernel.org/r/20180117082050.25406-1-avagin@openvz.org
Link: http://lkml.kernel.org/r/20180112185812.7710-1-avagin@openvz.org
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Konovalov [Tue, 10 Apr 2018 23:30:39 +0000 (16:30 -0700)]
kasan: prevent compiler from optimizing away memset in tests
A compiler can optimize away memset calls by replacing them with mov
instructions. There are KASAN tests that specifically test that KASAN
correctly handles memset calls so we don't want this optimization to
happen.
The solution is to add -fno-builtin flag to test_kasan.ko
Link: http://lkml.kernel.org/r/105ec9a308b2abedb1a0d1fdced0c22d765e4732.1519924383.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Chris Mason <clm@fb.com>
Cc: Yury Norov <ynorov@caviumnetworks.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Luis R . Rodriguez" <mcgrof@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Cc: Kostya Serebryany <kcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Konovalov [Tue, 10 Apr 2018 23:30:35 +0000 (16:30 -0700)]
kasan: fix invalid-free test crashing the kernel
When an invalid-free is triggered by one of the KASAN tests, the object
doesn't actually get freed. This later leads to a BUG failure in
kmem_cache_destroy that checks that there are no allocated objects in
the cache that is being destroyed.
Fix this by calling kmem_cache_free with the proper object address after
the call that triggers invalid-free.
Link: http://lkml.kernel.org/r/286eaefc0a6c3fa9b83b87e7d6dc0fbb5b5c9926.1519924383.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Chris Mason <clm@fb.com>
Cc: Yury Norov <ynorov@caviumnetworks.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Luis R . Rodriguez" <mcgrof@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Cc: Kostya Serebryany <kcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Konovalov [Tue, 10 Apr 2018 23:30:31 +0000 (16:30 -0700)]
kasan, slub: fix handling of kasan_slab_free hook
The kasan_slab_free hook's return value denotes whether the reuse of a
slab object must be delayed (e.g. when the object is put into memory
qurantine).
The current way SLUB handles this hook is by ignoring its return value
and hardcoding checks similar (but not exactly the same) to the ones
performed in kasan_slab_free, which is prone to making mistakes.
The main difference between the hardcoded checks and the ones in
kasan_slab_free is whether we want to perform a free in case when an
invalid-free or a double-free was detected (we don't).
This patch changes the way SLUB handles this by:
1. taking into account the return value of kasan_slab_free for each of
the objects, that are being freed;
2. reconstructing the freelist of objects to exclude the ones, whose
reuse must be delayed.
[andreyknvl@google.com: eliminate unnecessary branch in slab_free]
Link: http://lkml.kernel.org/r/a62759a2545fddf69b0c034547212ca1eb1b3ce2.1520359686.git.andreyknvl@google.com
Link: http://lkml.kernel.org/r/083f58501e54731203801d899632d76175868e97.1519400992.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 10 Apr 2018 23:30:27 +0000 (16:30 -0700)]
mm/thp: don't count ZONE_MOVABLE as the target for freepage reserving
There was a regression report for "mm/cma: manage the memory of the CMA
area by using the ZONE_MOVABLE" [1] and I think that it is related to
this problem. CMA patchset makes the system use one more zone
(ZONE_MOVABLE) and then increases min_free_kbytes. It reduces usable
memory and it could cause regression.
ZONE_MOVABLE only has movable pages so we don't need to keep enough
freepages to avoid or deal with fragmentation. So, don't count it.
This changes min_free_kbytes and thus min_watermark greatly if
ZONE_MOVABLE is used. It will make the user uses more memory.
System:
22GB ram, fakenuma, 2 nodes. 5 zones are used.
Before:
min_free_kbytes: 112640
zone_info (min_watermark):
Node 0, zone DMA
min 19
Node 0, zone DMA32
min 3778
Node 0, zone Normal
min 10191
Node 0, zone Movable
min 0
Node 0, zone Device
min 0
Node 1, zone DMA
min 0
Node 1, zone DMA32
min 0
Node 1, zone Normal
min 14043
Node 1, zone Movable
min 127
Node 1, zone Device
min 0
After:
min_free_kbytes: 90112
zone_info (min_watermark):
Node 0, zone DMA
min 15
Node 0, zone DMA32
min 3022
Node 0, zone Normal
min 8152
Node 0, zone Movable
min 0
Node 0, zone Device
min 0
Node 1, zone DMA
min 0
Node 1, zone DMA32
min 0
Node 1, zone Normal
min 11234
Node 1, zone Movable
min 102
Node 1, zone Device
min 0
[1] (lkml.kernel.org/r/
20180102063528.GG30397%20()%20yexl-desktop)
Link: http://lkml.kernel.org/r/1522913236-15776-1-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 10 Apr 2018 23:30:23 +0000 (16:30 -0700)]
ARM: CMA: avoid double mapping to the CMA area if CONFIG_HIGHMEM=y
CMA area is now managed by the separate zone, ZONE_MOVABLE, to fix many
MM related problems. In this implementation, if CONFIG_HIGHMEM = y,
then ZONE_MOVABLE is considered as HIGHMEM and the memory of the CMA
area is also considered as HIGHMEM. That means that they are considered
as the page without direct mapping. However, CMA area could be in a
lowmem and the memory could have direct mapping.
In ARM, when establishing a new mapping for DMA, direct mapping should
be cleared since two mapping with different cache policy could cause
unknown problem. With this patch, PageHighmem() for the CMA memory
located in lowmem returns true so that the function for DMA mapping
cannot notice whether it needs to clear direct mapping or not,
correctly. To handle this situation, this patch always clears direct
mapping for such CMA memory.
Link: http://lkml.kernel.org/r/1512114786-5085-4-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 10 Apr 2018 23:30:19 +0000 (16:30 -0700)]
mm/cma: remove ALLOC_CMA
Now, all reserved pages for CMA region are belong to the ZONE_MOVABLE
and it only serves for a request with GFP_HIGHMEM && GFP_MOVABLE.
Therefore, we don't need to maintain ALLOC_CMA at all.
Link: http://lkml.kernel.org/r/1512114786-5085-3-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 10 Apr 2018 23:30:15 +0000 (16:30 -0700)]
mm/cma: manage the memory of the CMA area by using the ZONE_MOVABLE
Patch series "mm/cma: manage the memory of the CMA area by using the
ZONE_MOVABLE", v2.
0. History
This patchset is the follow-up of the discussion about the "Introduce
ZONE_CMA (v7)" [1]. Please reference it if more information is needed.
1. What does this patch do?
This patch changes the management way for the memory of the CMA area in
the MM subsystem. Currently the memory of the CMA area is managed by
the zone where their pfn is belong to. However, this approach has some
problems since MM subsystem doesn't have enough logic to handle the
situation that different characteristic memories are in a single zone.
To solve this issue, this patch try to manage all the memory of the CMA
area by using the MOVABLE zone. In MM subsystem's point of view,
characteristic of the memory on the MOVABLE zone and the memory of the
CMA area are the same. So, managing the memory of the CMA area by using
the MOVABLE zone will not have any problem.
2. Motivation
There are some problems with current approach. See following. Although
these problem would not be inherent and it could be fixed without this
conception change, it requires many hooks addition in various code path
and it would be intrusive to core MM and would be really error-prone.
Therefore, I try to solve them with this new approach. Anyway,
following is the problems of the current implementation.
o CMA memory utilization
First, following is the freepage calculation logic in MM.
- For movable allocation: freepage = total freepage
- For unmovable allocation: freepage = total freepage - CMA freepage
Freepages on the CMA area is used after the normal freepages in the zone
where the memory of the CMA area is belong to are exhausted. At that
moment that the number of the normal freepages is zero, so
- For movable allocation: freepage = total freepage = CMA freepage
- For unmovable allocation: freepage = 0
If unmovable allocation comes at this moment, allocation request would
fail to pass the watermark check and reclaim is started. After reclaim,
there would exist the normal freepages so freepages on the CMA areas
would not be used.
FYI, there is another attempt [2] trying to solve this problem in lkml.
And, as far as I know, Qualcomm also has out-of-tree solution for this
problem.
Useless reclaim:
There is no logic to distinguish CMA pages in the reclaim path. Hence,
CMA page is reclaimed even if the system just needs the page that can be
usable for the kernel allocation.
Atomic allocation failure:
This is also related to the fallback allocation policy for the memory of
the CMA area. Consider the situation that the number of the normal
freepages is *zero* since the bunch of the movable allocation requests
come. Kswapd would not be woken up due to following freepage
calculation logic.
- For movable allocation: freepage = total freepage = CMA freepage
If atomic unmovable allocation request comes at this moment, it would
fails due to following logic.
- For unmovable allocation: freepage = total freepage - CMA freepage = 0
It was reported by Aneesh [3].
Useless compaction:
Usual high-order allocation request is unmovable allocation request and
it cannot be served from the memory of the CMA area. In compaction,
migration scanner try to migrate the page in the CMA area and make
high-order page there. As mentioned above, it cannot be usable for the
unmovable allocation request so it's just waste.
3. Current approach and new approach
Current approach is that the memory of the CMA area is managed by the
zone where their pfn is belong to. However, these memory should be
distinguishable since they have a strong limitation. So, they are
marked as MIGRATE_CMA in pageblock flag and handled specially. However,
as mentioned in section 2, the MM subsystem doesn't have enough logic to
deal with this special pageblock so many problems raised.
New approach is that the memory of the CMA area is managed by the
MOVABLE zone. MM already have enough logic to deal with special zone
like as HIGHMEM and MOVABLE zone. So, managing the memory of the CMA
area by the MOVABLE zone just naturally work well because constraints
for the memory of the CMA area that the memory should always be
migratable is the same with the constraint for the MOVABLE zone.
There is one side-effect for the usability of the memory of the CMA
area. The use of MOVABLE zone is only allowed for a request with
GFP_HIGHMEM && GFP_MOVABLE so now the memory of the CMA area is also
only allowed for this gfp flag. Before this patchset, a request with
GFP_MOVABLE can use them. IMO, It would not be a big issue since most
of GFP_MOVABLE request also has GFP_HIGHMEM flag. For example, file
cache page and anonymous page. However, file cache page for blockdev
file is an exception. Request for it has no GFP_HIGHMEM flag. There is
pros and cons on this exception. In my experience, blockdev file cache
pages are one of the top reason that causes cma_alloc() to fail
temporarily. So, we can get more guarantee of cma_alloc() success by
discarding this case.
Note that there is no change in admin POV since this patchset is just
for internal implementation change in MM subsystem. Just one minor
difference for admin is that the memory stat for CMA area will be
printed in the MOVABLE zone. That's all.
4. Result
Following is the experimental result related to utilization problem.
8 CPUs, 1024 MB, VIRTUAL MACHINE
make -j16
<Before>
CMA area: 0 MB 512 MB
Elapsed-time: 92.4 186.5
pswpin: 82 18647
pswpout: 160 69839
<After>
CMA : 0 MB 512 MB
Elapsed-time: 93.1 93.4
pswpin: 84 46
pswpout: 183 92
akpm: "kernel test robot" reported a 26% improvement in
vm-scalability.throughput:
http://lkml.kernel.org/r/
20180330012721.GA3845@yexl-desktop
[1]: lkml.kernel.org/r/
1491880640-9944-1-git-send-email-iamjoonsoo.kim@lge.com
[2]: https://lkml.org/lkml/2014/10/15/623
[3]: http://www.spinics.net/lists/linux-mm/msg100562.html
Link: http://lkml.kernel.org/r/1512114786-5085-2-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joonsoo Kim [Tue, 10 Apr 2018 23:30:11 +0000 (16:30 -0700)]
mm/page_alloc: don't reserve ZONE_HIGHMEM for ZONE_MOVABLE request
Freepage on ZONE_HIGHMEM doesn't work for kernel memory so it's not that
important to reserve. When ZONE_MOVABLE is used, this problem would
theorectically cause to decrease usable memory for GFP_HIGHUSER_MOVABLE
allocation request which is mainly used for page cache and anon page
allocation. So, fix it by setting 0 to
sysctl_lowmem_reserve_ratio[ZONE_HIGHMEM].
And, defining sysctl_lowmem_reserve_ratio array by MAX_NR_ZONES - 1 size
makes code complex. For example, if there is highmem system, following
reserve ratio is activated for *NORMAL ZONE* which would be easyily
misleading people.
#ifdef CONFIG_HIGHMEM
32
#endif
This patch also fixes this situation by defining
sysctl_lowmem_reserve_ratio array by MAX_NR_ZONES and place "#ifdef" to
right place.
Link: http://lkml.kernel.org/r/1504672525-17915-1-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Tony Lindgren <tony@atomide.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <linux-api@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Tue, 10 Apr 2018 23:30:07 +0000 (16:30 -0700)]
mm: unclutter THP migration
THP migration is hacked into the generic migration with rather
surprising semantic. The migration allocation callback is supposed to
check whether the THP can be migrated at once and if that is not the
case then it allocates a simple page to migrate. unmap_and_move then
fixes that up by spliting the THP into small pages while moving the head
page to the newly allocated order-0 page. Remaning pages are moved to
the LRU list by split_huge_page. The same happens if the THP allocation
fails. This is really ugly and error prone [1].
I also believe that split_huge_page to the LRU lists is inherently wrong
because all tail pages are not migrated. Some callers will just work
around that by retrying (e.g. memory hotplug). There are other pfn
walkers which are simply broken though. e.g. madvise_inject_error will
migrate head and then advances next pfn by the huge page size.
do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind),
will simply split the THP before migration if the THP migration is not
supported then falls back to single page migration but it doesn't handle
tail pages if the THP migration path is not able to allocate a fresh THP
so we end up with ENOMEM and fail the whole migration which is a
questionable behavior. Page compaction doesn't try to migrate large
pages so it should be immune.
This patch tries to unclutter the situation by moving the special THP
handling up to the migrate_pages layer where it actually belongs. We
simply split the THP page into the existing list if unmap_and_move fails
with ENOMEM and retry. So we will _always_ migrate all THP subpages and
specific migrate_pages users do not have to deal with this case in a
special way.
[1] http://lkml.kernel.org/r/
20171121021855.50525-1-zi.yan@sent.com
Link: http://lkml.kernel.org/r/20180103082555.14592-4-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Andrea Reale <ar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Tue, 10 Apr 2018 23:30:03 +0000 (16:30 -0700)]
mm, migrate: remove reason argument from new_page_t
No allocation callback is using this argument anymore. new_page_node
used to use this parameter to convey node_id resp. migration error up
to move_pages code (do_move_page_to_node_array). The error status never
made it into the final status field and we have a better way to
communicate node id to the status field now. All other allocation
callbacks simply ignored the argument so we can drop it finally.
[mhocko@suse.com: fix migration callback]
Link: http://lkml.kernel.org/r/20180105085259.GH2801@dhcp22.suse.cz
[akpm@linux-foundation.org: fix alloc_misplaced_dst_page()]
[mhocko@kernel.org: fix build]
Link: http://lkml.kernel.org/r/20180103091134.GB11319@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20180103082555.14592-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Andrea Reale <ar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Tue, 10 Apr 2018 23:29:59 +0000 (16:29 -0700)]
mm, numa: rework do_pages_move
Patch series "unclutter thp migration"
Motivation:
THP migration is hacked into the generic migration with rather
surprising semantic. The migration allocation callback is supposed to
check whether the THP can be migrated at once and if that is not the
case then it allocates a simple page to migrate. unmap_and_move then
fixes that up by splitting the THP into small pages while moving the
head page to the newly allocated order-0 page. Remaining pages are
moved to the LRU list by split_huge_page. The same happens if the THP
allocation fails. This is really ugly and error prone [2].
I also believe that split_huge_page to the LRU lists is inherently wrong
because all tail pages are not migrated. Some callers will just work
around that by retrying (e.g. memory hotplug). There are other pfn
walkers which are simply broken though. e.g. madvise_inject_error will
migrate head and then advances next pfn by the huge page size.
do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind),
will simply split the THP before migration if the THP migration is not
supported then falls back to single page migration but it doesn't handle
tail pages if the THP migration path is not able to allocate a fresh THP
so we end up with ENOMEM and fail the whole migration which is a
questionable behavior. Page compaction doesn't try to migrate large
pages so it should be immune.
The first patch reworks do_pages_move which relies on a very ugly
calling semantic when the return status is pushed to the migration path
via private pointer. It uses pre allocated fixed size batching to
achieve that. We simply cannot do the same if a THP is to be split
during the migration path which is done in the patch 3. Patch 2 is
follow up cleanup which removes the mentioned return status calling
convention ugliness.
On a side note:
There are some semantic issues I have encountered on the way when
working on patch 1 but I am not addressing them here. E.g. trying to
move THP tail pages will result in either success or EBUSY (the later
one more likely once we isolate head from the LRU list). Hugetlb
reports EACCESS on tail pages. Some errors are reported via status
parameter but migration failures are not even though the original
`reason' argument suggests there was an intention to do so. From a
quick look into git history this never worked. I have tried to keep the
semantic unchanged.
Then there is a relatively minor thing that the page isolation might
fail because of pages not being on the LRU - e.g. because they are
sitting on the per-cpu LRU caches. Easily fixable.
This patch (of 3):
do_pages_move is supposed to move user defined memory (an array of
addresses) to the user defined numa nodes (an array of nodes one for
each address). The user provided status array then contains resulting
numa node for each address or an error. The semantic of this function
is little bit confusing because only some errors are reported back.
Notably migrate_pages error is only reported via the return value. This
patch doesn't try to address these semantic nuances but rather change
the underlying implementation.
Currently we are processing user input (which can be really large) in
batches which are stored to a temporarily allocated page. Each address
is resolved to its struct page and stored to page_to_node structure
along with the requested target numa node. The array of these
structures is then conveyed down the page migration path via private
argument. new_page_node then finds the corresponding structure and
allocates the proper target page.
What is the problem with the current implementation and why to change
it? Apart from being quite ugly it also doesn't cope with unexpected
pages showing up on the migration list inside migrate_pages path. That
doesn't happen currently but the follow up patch would like to make the
thp migration code more clear and that would need to split a THP into
the list for some cases.
How does the new implementation work? Well, instead of batching into a
fixed size array we simply batch all pages that should be migrated to
the same node and isolate all of them into a linked list which doesn't
require any additional storage. This should work reasonably well
because page migration usually migrates larger ranges of memory to a
specific node. So the common case should work equally well as the
current implementation. Even if somebody constructs an input where the
target numa nodes would be interleaved we shouldn't see a large
performance impact because page migration alone doesn't really benefit
from batching. mmap_sem batching for the lookup is quite questionable
and isolate_lru_page which would benefit from batching is not using it
even in the current implementation.
Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Reale <ar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Colin Ian King [Tue, 10 Apr 2018 23:29:55 +0000 (16:29 -0700)]
mm/swapfile.c: make pointer swap_avail_heads static
The pointer swap_avail_heads is local to the source and does not need to
be in global scope, so make it static.
Cleans up sparse warning:
mm/swapfile.c:88:19: warning: symbol 'swap_avail_heads' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20180206215836.12366-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Tue, 10 Apr 2018 23:29:52 +0000 (16:29 -0700)]
memcg: fix per_node_info cleanup
syzbot has triggered a NULL ptr dereference when allocation fault
injection enforces a failure and alloc_mem_cgroup_per_node_info
initializes memcg->nodeinfo only half way through.
But __mem_cgroup_free still tries to free all per-node data and
dereferences pn->lruvec_stat_cpu unconditioanlly even if the specific
per-node data hasn't been initialized.
The bug is quite unlikely to hit because small allocations do not fail
and we would need quite some numa nodes to make struct
mem_cgroup_per_node large enough to cross the costly order.
Link: http://lkml.kernel.org/r/20180406100906.17790-1-mhocko@kernel.org
Reported-by: syzbot+8a5de3cce7cdc70e9ebe@syzkaller.appspotmail.com
Fixes:
00f3ca2c2d66 ("mm: memcontrol: per-lruvec stats infrastructure")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tom Abraham [Tue, 10 Apr 2018 23:29:48 +0000 (16:29 -0700)]
swap: divide-by-zero when zero length swap file on ssd
Calling swapon() on a zero length swap file on SSD can lead to a
divide-by-zero.
Although creating such files isn't possible with mkswap and they woud be
considered invalid, it would be better for the swapon code to be more
robust and handle this condition gracefully (return -EINVAL).
Especially since the fix is small and straightforward.
To help with wear leveling on SSD, the swapon syscall calculates a
random position in the swap file using modulo p->highest_bit, which is
set to maxpages - 1 in read_swap_header.
If the swap file is zero length, read_swap_header sets maxpages=1 and
last_page=0, resulting in p->highest_bit=0 and we divide-by-zero when we
modulo p->highest_bit in swapon syscall.
This can be prevented by having read_swap_header return zero if
last_page is zero.
Link: http://lkml.kernel.org/r/5AC747C1020000A7001FA82C@prv-mh.provo.novell.com
Signed-off-by: Thomas Abraham <tabraham@suse.com>
Reported-by: <Mark.Landis@Teradata.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Tue, 10 Apr 2018 23:29:45 +0000 (16:29 -0700)]
mm: memcg: make sure memory.events is uptodate when waking pollers
Commit
a983b5ebee57 ("mm: memcontrol: fix excessive complexity in
memory.stat reporting") added per-cpu drift to all memory cgroup stats
and events shown in memory.stat and memory.events.
For memory.stat this is acceptable. But memory.events issues file
notifications, and somebody polling the file for changes will be
confused when the counters in it are unchanged after a wakeup.
Luckily, the events in memory.events - MEMCG_LOW, MEMCG_HIGH, MEMCG_MAX,
MEMCG_OOM - are sufficiently rare and high-level that we don't need
per-cpu buffering for them: MEMCG_HIGH and MEMCG_MAX would be the most
frequent, but they're counting invocations of reclaim, which is a
complex operation that touches many shared cachelines.
This splits memory.events from the generic VM events and tracks them in
their own, unbuffered atomic counters. That's also cleaner, as it
eliminates the ugly enum nesting of VM and cgroup events.
[hannes@cmpxchg.org: "array subscript is above array bounds"]
Link: http://lkml.kernel.org/r/20180406155441.GA20806@cmpxchg.org
Link: http://lkml.kernel.org/r/20180405175507.GA24817@cmpxchg.org
Fixes:
a983b5ebee57 ("mm: memcontrol: fix excessive complexity in memory.stat reporting")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Claudio Imbrenda [Tue, 10 Apr 2018 23:29:41 +0000 (16:29 -0700)]
mm/ksm.c: fix inconsistent accounting of zero pages
When using KSM with use_zero_pages, we replace anonymous pages
containing only zeroes with actual zero pages, which are not anonymous.
We need to do proper accounting of the mm counters, otherwise we will
get wrong values in /proc and a BUG message in dmesg when tearing down
the mm.
Link: http://lkml.kernel.org/r/1522931274-15552-1-git-send-email-imbrenda@linux.vnet.ibm.com
Fixes:
e86c59b1b1 ("mm/ksm: improve deduplication of zero pages with colouring")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox [Tue, 10 Apr 2018 23:29:37 +0000 (16:29 -0700)]
mm/z3fold.c: use gfpflags_allow_blocking
We have a perfectly good macro to determine whether the gfp flags allow
you to sleep or not; use it instead of trying to infer it.
Link: http://lkml.kernel.org/r/20180408062206.GC16007@bombadil.infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xidong Wang [Tue, 10 Apr 2018 23:29:34 +0000 (16:29 -0700)]
z3fold: fix memory leak
In z3fold_create_pool(), the memory allocated by __alloc_percpu() is not
released on the error path that pool->compact_wq , which holds the
return value of create_singlethread_workqueue(), is NULL. This will
result in a memory leak bug.
[akpm@linux-foundation.org: fix oops on kzalloc() failure, check __alloc_percpu() retval]
Link: http://lkml.kernel.org/r/1522803111-29209-1-git-send-email-wangxidong_97@163.com
Signed-off-by: Xidong Wang <wangxidong_97@163.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Tue, 10 Apr 2018 23:29:30 +0000 (16:29 -0700)]
memcg, thp: do not invoke oom killer on thp charges
A THP memcg charge can trigger the oom killer since
2516035499b9 ("mm,
thp: remove __GFP_NORETRY from khugepaged and madvised allocations").
We have used an explicit __GFP_NORETRY previously which ruled the OOM
killer automagically.
Memcg charge path should be semantically compliant with the allocation
path and that means that if we do not trigger the OOM killer for costly
orders which should do the same in the memcg charge path as well.
Otherwise we are forcing callers to distinguish the two and use
different gfp masks which is both non-intuitive and bug prone. As soon
as we get a costly high order kmalloc user we even do not have any means
to tell the memcg specific gfp mask to prevent from OOM because the
charging is deep within guts of the slab allocator.
The unexpected memcg OOM on THP has already been fixed upstream by
9d3c3354bb85 ("mm, thp: do not cause memcg oom for thp") but this is a
one-off fix rather than a generic solution. Teach mem_cgroup_oom to
bail out on costly order requests to fix the THP issue as well as any
other costly OOM eligible allocations to be added in future.
Also revert
9d3c3354bb85 because special gfp for THP is no longer
needed.
Link: http://lkml.kernel.org/r/20180403193129.22146-1-mhocko@kernel.org
Fixes:
2516035499b9 ("mm, thp: remove __GFP_NORETRY from khugepaged and madvised allocations")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ralph Campbell [Tue, 10 Apr 2018 23:29:27 +0000 (16:29 -0700)]
mm/migrate: properly preserve write attribute in special migrate entry
Use of pte_write(pte) is only valid for present pte, the common code
which set the migration entry can be reach for both valid present pte
and special swap entry (for device memory). Fix the code to use the
mpfn value which properly handle both cases.
On x86 this did not have any bad side effect because pte write bit is
below PAGE_BIT_GLOBAL and thus special swap entry have it set to 0 which
in turn means we were always creating read only special migration entry.
So once migration did finish we always write protected the CPU page
table entry (moreover this is only an issue when migrating from device
memory to system memory). End effect is that CPU write access would
fault again and restore write permission.
This behaviour isn't too bad; it just burns CPU cycles by forcing CPU to
take a second fault on write access. ie, double faulting the same
address. There is no corruption or incorrect states (it behaves as a
COWed page from a fork with a mapcount of 1).
Link: http://lkml.kernel.org/r/20180402023506.12180-1-jglisse@redhat.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wei Yang [Tue, 10 Apr 2018 23:29:23 +0000 (16:29 -0700)]
mm: check __highest_present_section_nr directly in memory_dev_init()
__highest_present_section_nr is a more strict boundary than
NR_MEM_SECTIONS. So checking __highest_present_section_nr directly is
enough.
Link: http://lkml.kernel.org/r/20180330032044.21647-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Tue, 10 Apr 2018 23:29:20 +0000 (16:29 -0700)]
sched/numa: avoid trapping faults and attempting migration of file-backed dirty pages
change_pte_range is called from task work context to mark PTEs for
receiving NUMA faulting hints. If the marked pages are dirty then
migration may fail. Some filesystems cannot migrate dirty pages without
blocking so are skipped in MIGRATE_ASYNC mode which just wastes CPU.
Even when they can, it can be a waste of cycles when the pages are
shared forcing higher scan rates. This patch avoids marking shared
dirty pages for hinting faults but also will skip a migration if the
page was dirtied after the scanner updated a clean page.
This is most noticeable running the NASA Parallel Benchmark when backed
by btrfs, the default root filesystem for some distributions, but also
noticeable when using XFS.
The following are results from a 4-socket machine running a 4.16-rc4
kernel with some scheduler patches that are pending for the next merge
window.
4.16.0-rc4 4.16.0-rc4
schedtip-
20180309 nodirty-v1
Time cg.D 459.07 ( 0.00%) 444.21 ( 3.24%)
Time ep.D 76.96 ( 0.00%) 77.69 ( -0.95%)
Time is.D 25.55 ( 0.00%) 27.85 ( -9.00%)
Time lu.D 601.58 ( 0.00%) 596.87 ( 0.78%)
Time mg.D 107.73 ( 0.00%) 108.22 ( -0.45%)
is.D regresses slightly in terms of absolute time but note that that
particular load varies quite a bit from run to run. The more relevant
observation is the total system CPU usage.
4.16.0-rc4 4.16.0-rc4
schedtip-
20180309 nodirty-v1
User 71471.91 70627.04
System 11078.96 8256.13
Elapsed 661.66 632.74
That is a substantial drop in system CPU usage and overall the workload
completes faster. The NUMA balancing statistics are also interesting
NUMA base PTE updates
111407972 139848884
NUMA huge PMD updates 206506 264869
NUMA page range updates
217139044 275461812
NUMA hint faults 4300924 3719784
NUMA hint local faults 3012539 3416618
NUMA hint local percent 70 91
NUMA pages migrated 1517487 1358420
While more PTEs are scanned due to changes in what faults are gathered,
it's clear that a far higher percentage of faults are local as the bulk
of the remote hits were dirty pages that, in this case with btrfs, had
no chance of migrating.
The following is a comparison when using XFS as that is a more realistic
filesystem choice for a data partition
4.16.0-rc4 4.16.0-rc4
schedtip-
20180309 nodirty-v1r47
Time cg.D 485.28 ( 0.00%) 442.62 ( 8.79%)
Time ep.D 77.68 ( 0.00%) 77.54 ( 0.18%)
Time is.D 26.44 ( 0.00%) 24.79 ( 6.24%)
Time lu.D 597.46 ( 0.00%) 597.11 ( 0.06%)
Time mg.D 142.65 ( 0.00%) 105.83 ( 25.81%)
That is a reasonable gain on two relatively long-lived workloads. While
not presented, there is also a substantial drop in system CPu usage and
the NUMA balancing stats show similar improvements in locality as btrfs
did.
Link: http://lkml.kernel.org/r/20180326094334.zserdec62gwmmfqf@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Tue, 10 Apr 2018 23:29:16 +0000 (16:29 -0700)]
Documentation/vm/hmm.txt: typos and syntaxes fixes
This fix typos and syntaxes, thanks to Randy Dunlap for pointing them out
(they were all my faults).
Link: http://lkml.kernel.org/r/20180409151859.4713-1-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Tue, 10 Apr 2018 23:29:13 +0000 (16:29 -0700)]
mm/hmm: fix header file if/else/endif maze, again
The last fix was still wrong, as we need the inline dummy functions also
for the case that CONFIG_HMM is enabled but CONFIG_HMM_MIRROR is not:
kernel/fork.o: In function `__mmdrop':
fork.c:(.text+0x14f6): undefined reference to `hmm_mm_destroy'
This adds back the second copy of the dummy functions, hopefully
this time in the right place.
Link: http://lkml.kernel.org/r/20180404110236.804484-1-arnd@arndb.de
Fixes:
8900d06a277a ("mm/hmm: fix header file if/else/endif maze")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tejun Heo [Tue, 10 Apr 2018 23:29:09 +0000 (16:29 -0700)]
mm/hmm.c: remove superfluous RCU protection around radix tree lookup
hmm_devmem_find() requires rcu_read_lock_held() but there's nothing which
actually uses the RCU protection. The only caller is
hmm_devmem_pages_create() which already grabs the mutex and does
superfluous rcu_read_lock/unlock() around the function.
This doesn't add anything and just adds to confusion. Remove the RCU
protection and open-code the radix tree lookup. If this needs to become
more sophisticated in the future, let's add them back when necessary.
Link: http://lkml.kernel.org/r/20180314194515.1661824-4-tj@kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Tue, 10 Apr 2018 23:29:06 +0000 (16:29 -0700)]
mm/hmm: use device driver encoding for HMM pfn
Users of hmm_vma_fault() and hmm_vma_get_pfns() provide a flags array and
pfn shift value allowing them to define their own encoding for HMM pfn
that are fill inside the pfns array of the hmm_range struct. With this
device driver can get pfn that match their own private encoding out of HMM
without having to do any conversion.
[rcampbell@nvidia.com: don't ignore specific pte fault flag in hmm_vma_fault()]
Link: http://lkml.kernel.org/r/20180326213009.2460-2-jglisse@redhat.com
[rcampbell@nvidia.com: clarify fault logic for device private memory]
Link: http://lkml.kernel.org/r/20180326213009.2460-3-jglisse@redhat.com
Link: http://lkml.kernel.org/r/20180323005527.758-16-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Tue, 10 Apr 2018 23:29:02 +0000 (16:29 -0700)]
mm/hmm: change hmm_vma_fault() to allow write fault on page basis
This changes hmm_vma_fault() to not take a global write fault flag for a
range but instead rely on caller to populate HMM pfns array with proper
fault flag ie HMM_PFN_VALID if driver want read fault for that address or
HMM_PFN_VALID and HMM_PFN_WRITE for write.
Moreover by setting HMM_PFN_DEVICE_PRIVATE the device driver can ask for
device private memory to be migrated back to system memory through page
fault.
This is more flexible API and it better reflects how device handles and
reports fault.
Link: http://lkml.kernel.org/r/20180323005527.758-15-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Tue, 10 Apr 2018 23:28:59 +0000 (16:28 -0700)]
mm/hmm: factor out pte and pmd handling to simplify hmm_vma_walk_pmd()
No functional change, just create one function to handle pmd and one to
handle pte (hmm_vma_handle_pmd() and hmm_vma_handle_pte()).
Link: http://lkml.kernel.org/r/20180323005527.758-14-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Tue, 10 Apr 2018 23:28:54 +0000 (16:28 -0700)]
mm/hmm: move hmm_pfns_clear() closer to where it is used
Move hmm_pfns_clear() closer to where it is used to make it clear it is
not use by page table walkers.
Link: http://lkml.kernel.org/r/20180323005527.758-13-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Tue, 10 Apr 2018 23:28:49 +0000 (16:28 -0700)]
mm/hmm: rename HMM_PFN_DEVICE_UNADDRESSABLE to HMM_PFN_DEVICE_PRIVATE
Make naming consistent across code, DEVICE_PRIVATE is the name use outside
HMM code so use that one.
Link: http://lkml.kernel.org/r/20180323005527.758-12-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Tue, 10 Apr 2018 23:28:46 +0000 (16:28 -0700)]
mm/hmm: do not differentiate between empty entry or missing directory
There is no point in differentiating between a range for which there is
not even a directory (and thus entries) and empty entry (pte_none() or
pmd_none() returns true).
Simply drop the distinction ie remove HMM_PFN_EMPTY flag and merge now
duplicate hmm_vma_walk_hole() and hmm_vma_walk_clear() functions.
Link: http://lkml.kernel.org/r/20180323005527.758-11-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Tue, 10 Apr 2018 23:28:42 +0000 (16:28 -0700)]
mm/hmm: cleanup special vma handling (VM_SPECIAL)
Special vma (one with any of the VM_SPECIAL flags) can not be access by
device because there is no consistent model across device drivers on those
vma and their backing memory.
This patch directly use hmm_range struct for hmm_pfns_special() argument
as it is always affecting the whole vma and thus the whole range.
It also make behavior consistent after this patch both hmm_vma_fault() and
hmm_vma_get_pfns() returns -EINVAL when facing such vma. Previously
hmm_vma_fault() returned 0 and hmm_vma_get_pfns() return -EINVAL but both
were filling the HMM pfn array with special entry.
Link: http://lkml.kernel.org/r/20180323005527.758-10-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Tue, 10 Apr 2018 23:28:38 +0000 (16:28 -0700)]
mm/hmm: use uint64_t for HMM pfn instead of defining hmm_pfn_t to ulong
All device driver we care about are using 64bits page table entry. In
order to match this and to avoid useless define convert all HMM pfn to
directly use uint64_t. It is a first step on the road to allow driver to
directly use pfn value return by HMM (saving memory and CPU cycles use for
conversion between the two).
Link: http://lkml.kernel.org/r/20180323005527.758-9-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Tue, 10 Apr 2018 23:28:34 +0000 (16:28 -0700)]
mm/hmm: remove HMM_PFN_READ flag and ignore peculiar architecture
Only peculiar architecture allow write without read thus assume that any
valid pfn do allow for read. Note we do not care for write only because
it does make sense with thing like atomic compare and exchange or any
other operations that allow you to get the memory value through them.
Link: http://lkml.kernel.org/r/20180323005527.758-8-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Tue, 10 Apr 2018 23:28:30 +0000 (16:28 -0700)]
mm/hmm: use struct for hmm_vma_fault(), hmm_vma_get_pfns() parameters
Both hmm_vma_fault() and hmm_vma_get_pfns() were taking a hmm_range struct
as parameter and were initializing that struct with others of their
parameters. Have caller of those function do this as they are likely to
already do and only pass this struct to both function this shorten
function signature and make it easier in the future to add new parameters
by simply adding them to the structure.
Link: http://lkml.kernel.org/r/20180323005527.758-7-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Tue, 10 Apr 2018 23:28:27 +0000 (16:28 -0700)]
mm/hmm: hmm_pfns_bad() was accessing wrong struct
The private field of mm_walk struct point to an hmm_vma_walk struct and
not to the hmm_range struct desired. Fix to get proper struct pointer.
Link: http://lkml.kernel.org/r/20180323005527.758-6-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Tue, 10 Apr 2018 23:28:23 +0000 (16:28 -0700)]
mm/hmm: unregister mmu_notifier when last HMM client quit
This code was lost in translation at one point. This properly call
mmu_notifier_unregister_no_release() once last user is gone. This fix the
zombie mm_struct as without this patch we do not drop the refcount we have
on it.
Link: http://lkml.kernel.org/r/20180323005527.758-5-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ralph Campbell [Tue, 10 Apr 2018 23:28:19 +0000 (16:28 -0700)]
mm/hmm: HMM should have a callback before MM is destroyed
hmm_mirror_register() registers a callback for when the CPU pagetable is
modified. Normally, the device driver will call hmm_mirror_unregister()
when the process using the device is finished. However, if the process
exits uncleanly, the struct_mm can be destroyed with no warning to the
device driver.
Link: http://lkml.kernel.org/r/20180323005527.758-4-jglisse@redhat.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jérôme Glisse [Tue, 10 Apr 2018 23:28:15 +0000 (16:28 -0700)]
mm/hmm: fix header file if/else/endif maze
The #if/#else/#endif for IS_ENABLED(CONFIG_HMM) were wrong. Because of
this after multiple include there was multiple definition of both
hmm_mm_init() and hmm_mm_destroy() leading to build failure if HMM was
enabled (CONFIG_HMM set).
Link: http://lkml.kernel.org/r/20180323005527.758-3-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ralph Campbell [Tue, 10 Apr 2018 23:28:11 +0000 (16:28 -0700)]
mm/hmm: documentation editorial update to HMM documentation
Update the documentation for HMM to fix minor typos and phrasing to be a
bit more readable.
Link: http://lkml.kernel.org/r/20180323005527.758-2-jglisse@redhat.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Stephen Bates <sbates@raithlin.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steven Rostedt [Tue, 10 Apr 2018 23:28:07 +0000 (16:28 -0700)]
mm, vmscan, tracing: use pointer to reclaim_stat struct in trace event
The trace event trace_mm_vmscan_lru_shrink_inactive() currently has 12
parameters! Seven of them are from the reclaim_stat structure. This
structure is currently local to mm/vmscan.c. By moving it to the global
vmstat.h header, we can also reference it from the vmscan tracepoints.
In moving it, it brings down the overhead of passing so many arguments
to the trace event. In the future, we may limit the number of arguments
that a trace event may pass (ideally just 6, but more realistically it
may be 8).
Before this patch, the code to call the trace event is this:
0f 83 aa fe ff ff jae
ffffffff811e6261 <shrink_inactive_list+0x1e1>
48 8b 45 a0 mov -0x60(%rbp),%rax
45 8b 64 24 20 mov 0x20(%r12),%r12d
44 8b 6d d4 mov -0x2c(%rbp),%r13d
8b 4d d0 mov -0x30(%rbp),%ecx
44 8b 75 cc mov -0x34(%rbp),%r14d
44 8b 7d c8 mov -0x38(%rbp),%r15d
48 89 45 90 mov %rax,-0x70(%rbp)
8b 83 b8 fe ff ff mov -0x148(%rbx),%eax
8b 55 c0 mov -0x40(%rbp),%edx
8b 7d c4 mov -0x3c(%rbp),%edi
8b 75 b8 mov -0x48(%rbp),%esi
89 45 80 mov %eax,-0x80(%rbp)
65 ff 05 e4 f7 e2 7e incl %gs:0x7ee2f7e4(%rip) # 15bd0 <__preempt_count>
48 8b 05 75 5b 13 01 mov 0x1135b75(%rip),%rax #
ffffffff8231bf68 <__tracepoint_mm_vmscan_lru_shrink_inactive+0x28>
48 85 c0 test %rax,%rax
74 72 je
ffffffff811e646a <shrink_inactive_list+0x3ea>
48 89 c3 mov %rax,%rbx
4c 8b 10 mov (%rax),%r10
89 f8 mov %edi,%eax
48 89 85 68 ff ff ff mov %rax,-0x98(%rbp)
89 f0 mov %esi,%eax
48 89 85 60 ff ff ff mov %rax,-0xa0(%rbp)
89 c8 mov %ecx,%eax
48 89 85 78 ff ff ff mov %rax,-0x88(%rbp)
89 d0 mov %edx,%eax
48 89 85 70 ff ff ff mov %rax,-0x90(%rbp)
8b 45 8c mov -0x74(%rbp),%eax
48 8b 7b 08 mov 0x8(%rbx),%rdi
48 83 c3 18 add $0x18,%rbx
50 push %rax
41 54 push %r12
41 55 push %r13
ff b5 78 ff ff ff pushq -0x88(%rbp)
41 56 push %r14
41 57 push %r15
ff b5 70 ff ff ff pushq -0x90(%rbp)
4c 8b 8d 68 ff ff ff mov -0x98(%rbp),%r9
4c 8b 85 60 ff ff ff mov -0xa0(%rbp),%r8
48 8b 4d 98 mov -0x68(%rbp),%rcx
48 8b 55 90 mov -0x70(%rbp),%rdx
8b 75 80 mov -0x80(%rbp),%esi
41 ff d2 callq *%r10
After the patch:
0f 83 a8 fe ff ff jae
ffffffff811e626d <shrink_inactive_list+0x1cd>
8b 9b b8 fe ff ff mov -0x148(%rbx),%ebx
45 8b 64 24 20 mov 0x20(%r12),%r12d
4c 8b 6d a0 mov -0x60(%rbp),%r13
65 ff 05 f5 f7 e2 7e incl %gs:0x7ee2f7f5(%rip) # 15bd0 <__preempt_count>
4c 8b 35 86 5b 13 01 mov 0x1135b86(%rip),%r14 #
ffffffff8231bf68 <__tracepoint_mm_vmscan_lru_shrink_inactive+0x28>
4d 85 f6 test %r14,%r14
74 2a je
ffffffff811e6411 <shrink_inactive_list+0x371>
49 8b 06 mov (%r14),%rax
8b 4d 8c mov -0x74(%rbp),%ecx
49 8b 7e 08 mov 0x8(%r14),%rdi
49 83 c6 18 add $0x18,%r14
4c 89 ea mov %r13,%rdx
45 89 e1 mov %r12d,%r9d
4c 8d 45 b8 lea -0x48(%rbp),%r8
89 de mov %ebx,%esi
51 push %rcx
48 8b 4d 98 mov -0x68(%rbp),%rcx
ff d0 callq *%rax
Link: http://lkml.kernel.org/r/2559d7cb-ec60-1200-2362-04fa34fd02bb@fb.com
Link: http://lkml.kernel.org/r/20180322121003.4177af15@gandalf.local.home
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reported-by: Alexei Starovoitov <ast@fb.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Ryabinin [Tue, 10 Apr 2018 23:28:03 +0000 (16:28 -0700)]
mm/vmscan: don't mess with pgdat->flags in memcg reclaim
memcg reclaim may alter pgdat->flags based on the state of LRU lists in
cgroup and its children. PGDAT_WRITEBACK may force kswapd to sleep
congested_wait(), PGDAT_DIRTY may force kswapd to writeback filesystem
pages. But the worst here is PGDAT_CONGESTED, since it may force all
direct reclaims to stall in wait_iff_congested(). Note that only kswapd
have powers to clear any of these bits. This might just never happen if
cgroup limits configured that way. So all direct reclaims will stall as
long as we have some congested bdi in the system.
Leave all pgdat->flags manipulations to kswapd. kswapd scans the whole
pgdat, only kswapd can clear pgdat->flags once node is balanced, thus
it's reasonable to leave all decisions about node state to kswapd.
Why only kswapd? Why not allow to global direct reclaim change these
flags? It is because currently only kswapd can clear these flags. I'm
less worried about the case when PGDAT_CONGESTED falsely not set, and
more worried about the case when it falsely set. If direct reclaimer
sets PGDAT_CONGESTED, do we have guarantee that after the congestion
problem is sorted out, kswapd will be woken up and clear the flag? It
seems like there is no such guarantee. E.g. direct reclaimers may
eventually balance pgdat and kswapd simply won't wake up (see
wakeup_kswapd()).
Moving pgdat->flags manipulation to kswapd, means that cgroup2 recalim
now loses its congestion throttling mechanism. Add per-cgroup
congestion state and throttle cgroup2 reclaimers if memcg is in
congestion state.
Currently there is no need in per-cgroup PGDAT_WRITEBACK and PGDAT_DIRTY
bits since they alter only kswapd behavior.
The problem could be easily demonstrated by creating heavy congestion in
one cgroup:
echo "+memory" > /sys/fs/cgroup/cgroup.subtree_control
mkdir -p /sys/fs/cgroup/congester
echo 512M > /sys/fs/cgroup/congester/memory.max
echo $$ > /sys/fs/cgroup/congester/cgroup.procs
/* generate a lot of diry data on slow HDD */
while true; do dd if=/dev/zero of=/mnt/sdb/zeroes bs=1M count=1024; done &
....
while true; do dd if=/dev/zero of=/mnt/sdb/zeroes bs=1M count=1024; done &
and some job in another cgroup:
mkdir /sys/fs/cgroup/victim
echo 128M > /sys/fs/cgroup/victim/memory.max
# time cat /dev/sda > /dev/null
real 10m15.054s
user 0m0.487s
sys 1m8.505s
According to the tracepoint in wait_iff_congested(), the 'cat' spent 50%
of the time sleeping there.
With the patch, cat don't waste time anymore:
# time cat /dev/sda > /dev/null
real 5m32.911s
user 0m0.411s
sys 0m56.664s
[aryabinin@virtuozzo.com: congestion state should be per-node]
Link: http://lkml.kernel.org/r/20180406135215.10057-1-aryabinin@virtuozzo.com
[ayabinin@virtuozzo.com: make congestion state per-cgroup-per-node instead of just per-cgroup[
Link: http://lkml.kernel.org/r/20180406180254.8970-2-aryabinin@virtuozzo.com
Link: http://lkml.kernel.org/r/20180323152029.11084-5-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Ryabinin [Tue, 10 Apr 2018 23:27:59 +0000 (16:27 -0700)]
mm/vmscan: don't change pgdat state on base of a single LRU list state
We have separate LRU list for each memory cgroup. Memory reclaim
iterates over cgroups and calls shrink_inactive_list() every inactive
LRU list. Based on the state of a single LRU shrink_inactive_list() may
flag the whole node as dirty,congested or under writeback. This is
obviously wrong and hurtful. It's especially hurtful when we have
possibly small congested cgroup in system. Than *all* direct reclaims
waste time by sleeping in wait_iff_congested(). And the more memcgs in
the system we have the longer memory allocation stall is, because
wait_iff_congested() called on each lru-list scan.
Sum reclaim stats across all visited LRUs on node and flag node as
dirty, congested or under writeback based on that sum. Also call
congestion_wait(), wait_iff_congested() once per pgdat scan, instead of
once per lru-list scan.
This only fixes the problem for global reclaim case. Per-cgroup reclaim
may alter global pgdat flags too, which is wrong. But that is separate
issue and will be addressed in the next patch.
This change will not have any effect on a systems with all workload
concentrated in a single cgroup.
[aryabinin@virtuozzo.com: check nr_writeback against all nr_taken, not just file]
Link: http://lkml.kernel.org/r/20180406180254.8970-1-aryabinin@virtuozzo.com
Link: http://lkml.kernel.org/r/20180323152029.11084-4-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Ryabinin [Tue, 10 Apr 2018 23:27:55 +0000 (16:27 -0700)]
mm/vmscan: remove redundant current_may_throttle() check
Only kswapd can have non-zero nr_immediate, and current_may_throttle()
is always true for kswapd (PF_LESS_THROTTLE bit is never set) thus it's
enough to check stat.nr_immediate only.
Link: http://lkml.kernel.org/r/20180315164553.17856-4-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Ryabinin [Tue, 10 Apr 2018 23:27:51 +0000 (16:27 -0700)]
mm/vmscan: update stale comments
Update some comments that became stale since transiton from per-zone to
per-node reclaim.
Link: http://lkml.kernel.org/r/20180315164553.17856-2-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin [Tue, 10 Apr 2018 23:27:47 +0000 (16:27 -0700)]
mm: treat indirectly reclaimable memory as free in overcommit logic
Indirectly reclaimable memory can consume a significant part of total
memory and it's actually reclaimable (it will be released under actual
memory pressure).
So, the overcommit logic should treat it as free.
Otherwise, it's possible to cause random system-wide memory allocation
failures by consuming a significant amount of memory by indirectly
reclaimable memory, e.g. dentry external names.
If overcommit policy GUESS is used, it might be used for denial of
service attack under some conditions.
The following program illustrates the approach. It causes the kernel to
allocate an unreclaimable kmalloc-256 chunk for each stat() call, so
that at some point the overcommit logic may start blocking large
allocation system-wide.
int main()
{
char buf[256];
unsigned long i;
struct stat statbuf;
buf[0] = '/';
for (i = 1; i < sizeof(buf); i++)
buf[i] = '_';
for (i = 0; 1; i++) {
sprintf(&buf[248], "%8lu", i);
stat(buf, &statbuf);
}
return 0;
}
This patch in combination with related indirectly reclaimable memory
patches closes this issue.
Link: http://lkml.kernel.org/r/20180313130041.8078-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin [Tue, 10 Apr 2018 23:27:44 +0000 (16:27 -0700)]
dcache: account external names as indirectly reclaimable memory
I received a report about suspicious growth of unreclaimable slabs on
some machines. I've found that it happens on machines with low memory
pressure, and these unreclaimable slabs are external names attached to
dentries.
External names are allocated using generic kmalloc() function, so they
are accounted as unreclaimable. But they are held by dentries, which
are reclaimable, and they will be reclaimed under the memory pressure.
In particular, this breaks MemAvailable calculation, as it doesn't take
unreclaimable slabs into account. This leads to a silly situation, when
a machine is almost idle, has no memory pressure and therefore has a big
dentry cache. And the resulting MemAvailable is too low to start a new
workload.
To address the issue, the NR_INDIRECTLY_RECLAIMABLE_BYTES counter is
used to track the amount of memory, consumed by external names. The
counter is increased in the dentry allocation path, if an external name
structure is allocated; and it's decreased in the dentry freeing path.
To reproduce the problem I've used the following Python script:
import os
for iter in range (0,
10000000):
try:
name = ("/some_long_name_%d" % iter) + "_" * 220
os.stat(name)
except Exception:
pass
Without this patch:
$ cat /proc/meminfo | grep MemAvailable
MemAvailable: 7811688 kB
$ python indirect.py
$ cat /proc/meminfo | grep MemAvailable
MemAvailable: 2753052 kB
With the patch:
$ cat /proc/meminfo | grep MemAvailable
MemAvailable: 7809516 kB
$ python indirect.py
$ cat /proc/meminfo | grep MemAvailable
MemAvailable: 7749144 kB
[guro@fb.com: fix indirectly reclaimable memory accounting for CONFIG_SLOB]
Link: http://lkml.kernel.org/r/20180312194140.19517-1-guro@fb.com
[guro@fb.com: fix indirectly reclaimable memory accounting]
Link: http://lkml.kernel.org/r/20180313125701.7955-1-guro@fb.com
Link: http://lkml.kernel.org/r/20180305133743.12746-5-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin [Tue, 10 Apr 2018 23:27:40 +0000 (16:27 -0700)]
mm: treat indirectly reclaimable memory as available in MemAvailable
Adjust /proc/meminfo MemAvailable calculation by adding the amount of
indirectly reclaimable memory (rounded to the PAGE_SIZE).
Link: http://lkml.kernel.org/r/20180305133743.12746-4-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin [Tue, 10 Apr 2018 23:27:36 +0000 (16:27 -0700)]
mm: introduce NR_INDIRECTLY_RECLAIMABLE_BYTES
Patch series "indirectly reclaimable memory", v2.
This patchset introduces the concept of indirectly reclaimable memory
and applies it to fix the issue of when a big number of dentries with
external names can significantly affect the MemAvailable value.
This patch (of 3):
Introduce a concept of indirectly reclaimable memory and adds the
corresponding memory counter and /proc/vmstat item.
Indirectly reclaimable memory is any sort of memory, used by the kernel
(except of reclaimable slabs), which is actually reclaimable, i.e. will
be released under memory pressure.
The counter is in bytes, as it's not always possible to count such
objects in pages. The name contains BYTES by analogy to
NR_KERNEL_STACK_KB.
Link: http://lkml.kernel.org/r/20180305133743.12746-2-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 10 Apr 2018 18:50:14 +0000 (11:50 -0700)]
Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming
Pull c6x updates from Mark Salter.
* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
c6x: pass endianness info to sparse
c6x: fix platforms/plldata.c get_coreid build error
c6x: remove unused KTHREAD_SIZE definition
Linus Torvalds [Tue, 10 Apr 2018 18:39:22 +0000 (11:39 -0700)]
Merge tag 'mips_4.17' of git://git./linux/kernel/git/jhogan/mips
Pull MIPS updates from James Hogan:
"These are the main MIPS changes for 4.17. Rough overview:
(1) generic platform: Add support for Microsemi Ocelot SoCs
(2) crypto: Add CRC32 and CRC32C HW acceleration module
(3) Various cleanups and misc improvements
More detailed summary:
Miscellaneous:
- hang more efficiently on halt/powerdown/restart
- pm-cps: Block system suspend when a JTAG probe is present
- expand make help text for generic defconfigs
- refactor handling of legacy defconfigs
- determine the entry point from the ELF file header to fix microMIPS
for certain toolchains
- introduce isa-rev.h for MIPS_ISA_REV and use to simplify other code
Minor cleanups:
- DTS: boston/ci20: Unit name cleanups and correction
- kdump: Make the default for PHYSICAL_START always 64-bit
- constify gpio_led in Alchemy, AR7, and TXX9
- silence a couple of W=1 warnings
- remove duplicate includes
Platform support:
Generic platform:
- add support for Microsemi Ocelot
- dt-bindings: Add vendor prefix for Microsemi Corporation
- dt-bindings: Add bindings for Microsemi SoCs
- add ocelot SoC & PCB123 board DTS files
- MAINTAINERS: Add entry for Microsemi MIPS SoCs
- enable crc32-mips on r6 configs
ath79:
- fix AR724X_PLL_REG_PCIE_CONFIG offset
BCM47xx:
- firmware: Use mac_pton() for MAC address parsing
- add Luxul XAP1500/XWR1750 WiFi LEDs
- use standard reset button for Luxul XWR-1750
BMIPS:
- enable CONFIG_BRCMSTB_PM in bmips_stb_defconfig for build coverage
- add STB PM, wake-up timer, watchdog DT nodes
Octeon:
- drop '.' after newlines in printk calls
ralink:
- pci-mt7621: Enable PCIe on MT7688"
* tag 'mips_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (37 commits)
MIPS: BCM47XX: Use standard reset button for Luxul XWR-1750
MIPS: BCM47XX: Add Luxul XAP1500/XWR1750 WiFi LEDs
MIPS: Make the default for PHYSICAL_START always 64-bit
MIPS: Use the entry point from the ELF file header
MAINTAINERS: Add entry for Microsemi MIPS SoCs
MIPS: generic: Add support for Microsemi Ocelot
MIPS: mscc: Add ocelot PCB123 device tree
MIPS: mscc: Add ocelot dtsi
dt-bindings: mips: Add bindings for Microsemi SoCs
dt-bindings: Add vendor prefix for Microsemi Corporation
MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset
MIPS: pci-mt7620: Enable PCIe on MT7688
MIPS: pm-cps: Block system suspend when a JTAG probe is present
MIPS: VDSO: Replace __mips_isa_rev with MIPS_ISA_REV
MIPS: BPF: Replace __mips_isa_rev with MIPS_ISA_REV
MIPS: cpu-features.h: Replace __mips_isa_rev with MIPS_ISA_REV
MIPS: Introduce isa-rev.h to define MIPS_ISA_REV
MIPS: Hang more efficiently on halt/powerdown/restart
FIRMWARE: bcm47xx_nvram: Replace mac address parsing
MIPS: BMIPS: Add Broadcom STB watchdog nodes
...
Linus Torvalds [Tue, 10 Apr 2018 18:27:30 +0000 (11:27 -0700)]
Merge tag 'trace-v4.17' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New features:
- Tom Zanussi's extended histogram work.
This adds the synthetic events to have histograms from multiple
event data Adds triggers "onmatch" and "onmax" to call the
synthetic events Several updates to the histogram code from this
- Allow way to nest ring buffer calls in the same context
- Allow absolute time stamps in ring buffer
- Rewrite of filter code parsing based on Al Viro's suggestions
- Setting of trace_clock to global if TSC is unstable (on boot)
- Better OOM handling when allocating large ring buffers
- Added initcall tracepoints (consolidated initcall_debug code with
them)
And other various fixes and clean ups"
* tag 'trace-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (68 commits)
init: Have initcall_debug still work without CONFIG_TRACEPOINTS
init, tracing: Have printk come through the trace events for initcall_debug
init, tracing: instrument security and console initcall trace events
init, tracing: Add initcall trace events
tracing: Add rcu dereference annotation for test func that touches filter->prog
tracing: Add rcu dereference annotation for filter->prog
tracing: Fixup logic inversion on setting trace_global_clock defaults
tracing: Hide global trace clock from lockdep
ring-buffer: Add set/clear_current_oom_origin() during allocations
ring-buffer: Check if memory is available before allocation
lockdep: Add print_irqtrace_events() to __warn
vsprintf: Do not preprocess non-dereferenced pointers for bprintf (%px and %pK)
tracing: Uninitialized variable in create_tracing_map_fields()
tracing: Make sure variable string fields are NULL-terminated
tracing: Add action comparisons when testing matching hist triggers
tracing: Don't add flag strings when displaying variable references
tracing: Fix display of hist trigger expressions containing timestamps
ftrace: Drop a VLA in module_exists()
tracing: Mention trace_clock=global when warning about unstable clocks
tracing: Default to using trace_global_clock if sched_clock is unstable
...
Linus Torvalds [Tue, 10 Apr 2018 17:25:57 +0000 (10:25 -0700)]
Merge tag 'libnvdimm-for-4.17' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"This cycle was was not something I ever want to repeat as there were
several late changes that have only now just settled.
Half of the branch up to commit
d2c997c0f145 ("fs, dax: use
page->mapping to warn...") have been in -next for several releases.
The of_pmem driver and the address range scrub rework were late
arrivals, and the dax work was scaled back at the last moment.
The of_pmem driver missed a previous merge window due to an oversight.
A sense of obligation to rectify that miss is why it is included for
4.17. It has acks from PowerPC folks. Stephen reported a build failure
that only occurs when merging it with your latest tree, for now I have
fixed that up by disabling modular builds of of_pmem. A test merge
with your tree has received a build success report from the 0day robot
over 156 configs.
An initial version of the ARS rework was submitted before the merge
window. It is self contained to libnvdimm, a net code reduction, and
passing all unit tests.
The filesystem-dax changes are based on the wait_var_event()
functionality from tip/sched/core. However, late review feedback
showed that those changes regressed truncate performance to a large
degree. The branch was rewound to drop the truncate behavior change
and now only includes preparation patches and cleanups (with full acks
and reviews). The finalization of this dax-dma-vs-trnucate work will
need to wait for 4.18.
Summary:
- A rework of the filesytem-dax implementation provides for detection
of unmap operations (truncate / hole punch) colliding with
in-progress device-DMA. A fix for these collisions remains a
work-in-progress pending resolution of truncate latency and
starvation regressions.
- The of_pmem driver expands the users of libnvdimm outside of x86
and ACPI to describe an implementation of persistent memory on
PowerPC with Open Firmware / Device tree.
- Address Range Scrub (ARS) handling is completely rewritten to
account for the fact that ARS may run for 100s of seconds and there
is no platform defined way to cancel it. ARS will now no longer
block namespace initialization.
- The NVDIMM Namespace Label implementation is updated to handle
label areas as small as 1K, down from 128K.
- Miscellaneous cleanups and updates to unit test infrastructure"
* tag 'libnvdimm-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (39 commits)
libnvdimm, of_pmem: workaround OF_NUMA=n build error
nfit, address-range-scrub: add module option to skip initial ars
nfit, address-range-scrub: rework and simplify ARS state machine
nfit, address-range-scrub: determine one platform max_ars value
powerpc/powernv: Create platform devs for nvdimm buses
doc/devicetree: Persistent memory region bindings
libnvdimm: Add device-tree based driver
libnvdimm: Add of_node to region and bus descriptors
libnvdimm, region: quiet region probe
libnvdimm, namespace: use a safe lookup for dimm device name
libnvdimm, dimm: fix dpa reservation vs uninitialized label area
libnvdimm, testing: update the default smart ctrl_temperature
libnvdimm, testing: Add emulation for smart injection commands
nfit, address-range-scrub: introduce nfit_spa->ars_state
libnvdimm: add an api to cast a 'struct nd_region' to its 'struct device'
nfit, address-range-scrub: fix scrub in-progress reporting
dax, dm: allow device-mapper to operate without dax support
dax: introduce CONFIG_DAX_DRIVER
fs, dax: use page->mapping to warn if truncate collides with a busy page
ext2, dax: introduce ext2_dax_aops
...
Linus Torvalds [Tue, 10 Apr 2018 17:22:27 +0000 (10:22 -0700)]
Merge tag 'rtc-4.17' of git://git./linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"This contains a few series that have been in preparation for a while
and that will help systems with RTCs that will fail in 2038, 2069 or
2100.
Subsystem:
- Add tracepoints
- Rework of the RTC/nvmem API to allow drivers to discard struct
nvmem_config after registration
- New range API, drivers can now expose the useful range of the RTC
- New offset API the core is now able to add an offset to the RTC
time, modifying the supported range.
- Multiple rtc_time64_to_tm fixes
- Handle time_t overflow on 32 bit platforms in the core instead of
letting drivers do crazy things.
- remove rtc_control API
New driver:
- Intersil ISL12026
Drivers:
- Drivers exposing the RTC non volatile memory have been converted to
use nvmem
- Removed useless time and date validation
- Removed an indirection pattern that was a cargo cult from ancient
drivers
- Removed VLA usage
- Fixed a possible race condition in probe functions
- AB8540 support is dropped from ab8500
- pcf85363 now has alarm support"
* tag 'rtc-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (128 commits)
rtc: snvs: Fix usage of snvs_rtc_enable
rtc: mt7622: fix module autoloading for OF platform drivers
rtc: isl12022: use true and false for boolean values
rtc: ab8500: Drop AB8540 support
rtc: remove a warning during scripts/kernel-doc step
rtc: 88pm860x: remove artificial limitation
rtc: 88pm80x: remove artificial limitation
rtc: st-lpc: remove artificial limitation
rtc: mrst: remove artificial limitation
rtc: mv: remove artificial limitation
rtc: hctosys: Ensure system time doesn't overflow time_t
parisc: time: stop validating rtc_time in .read_time
rtc: pcf85063: fix clearing bits in pcf85063_start_clock
rtc: at91sam9: Set name of regmap_config
rtc: s5m: Remove VLA usage
rtc: s5m: Move enum from rtc.h to rtc-s5m.c
rtc: remove VLA usage
rtc: Add useful timestamp definitions
rtc: Add one offset seconds to expand RTC range
rtc: Factor out the RTC range validation into rtc_valid_range()
...
Linus Torvalds [Tue, 10 Apr 2018 17:20:00 +0000 (10:20 -0700)]
Merge tag 'fbdev-v4.17' of git://github.com/bzolnier/linux
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
"There is nothing really major here, just a couple of small bugfixes,
improvements and cleanups:
- make it possible to load radeonfb driver when offb driver is loaded
first (Mathieu Malaterre)
- fix memory leak in offb driver (Mathieu Malaterre)
- fix unaligned access in udlfb driver (Ladislav Michl)
- convert atmel_lcdfb driver to use GPIO descriptors (Ludovic
Desroches)
- avoid mismatched prototypes in sisfb driver (Arnd Bergmann)
- remove VLA usage from viafb driver (Gustavo A. R. Silva)
- add missing help text to FB_I810_I2 config option (Ulf Magnusson)
- misc fixes (Gustavo A. R. Silva, Colin Ian King, Markus Elfring)
- remove dead code from s3c-fb driver for Exynos and S5PV210
platforms
- misc cleanups (Corentin Labbe, Ladislav Michl, Ulf Magnusson,
Vladimir Zapolskiy, Markus Elfring)"
* tag 'fbdev-v4.17' of git://github.com/bzolnier/linux: (32 commits)
video: fbdev: s3c-fb: remove dead platform code for Exynos and S5PV210 platforms
video: au1100fb: Delete an unnecessary variable initialisation in au1100fb_drv_probe()
video: au1100fb: Improve a size determination in au1100fb_drv_probe()
video: au1100fb: Delete an error message for a failed memory allocation in au1100fb_drv_probe()
video/console/sticore: Delete an error message for a failed memory allocation in sti_try_rom_generic()
video: ARM CLCD: Improve a size determination in clcdfb_probe()
video: ARM CLCD: Delete an error message for a failed memory allocation in clcdfb_probe()
video: matroxfb: Delete an error message for a failed memory allocation in matroxfb_crtc2_probe()
video: s3c-fb: Improve a size determination in s3c_fb_probe()
video: s3c-fb: Delete an error message for a failed memory allocation in s3c_fb_probe()
video: fsl-diu-fb: Delete an error message for a failed memory allocation in fsl_diu_init()
video: ssd1307fb: Improve a size determination in ssd1307fb_probe()
video: smscufx: Delete an error message for a failed memory allocation in ufx_realloc_framebuffer()
video: smscufx: Return an error code only as a constant in ufx_realloc_framebuffer()
video: smscufx: Less checks in ufx_usb_probe() after error detection
video: udlfb: Return an error code only as a constant in dlfb_realloc_framebuffer()
video/fbdev/stifb: Delete an error message for a failed memory allocation in stifb_init_fb()
video/fbdev/stifb: Return -ENOMEM after a failed kzalloc() in stifb_init_fb()
video: fbdev: aty128fb: use true and false for boolean values
fbdev: aty: fix missing indentation in if statement
...
Linus Torvalds [Tue, 10 Apr 2018 17:16:04 +0000 (10:16 -0700)]
Merge tag 'sound-fix-4.17-rc1' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The main purpose of this pull request is a fix for a regression in the
recent PCM OSS emulation code that may lead to RCU stall. Since
syzkaller hits this too often, I send the pull request now with a
minimal collection. Possibly another pull request may follow before
RC1.
The other fixes here are for USB-audio class 2 and 3 to improve the
parser for the clock descriptors. These are rather cleanups but good
for security, too.
Last but not least, another included fix is the trivial one to remove
superfluous WARN_ON() that annoyed syzbot"
* tag 'sound-fix-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: pcm: Remove WARN_ON() at snd_pcm_hw_params() error
ALSA: pcm: Fix endless loop for XRUN recovery in OSS emulation
ALSA: usb-audio: Add sanity checks in UAC3 clock parsers
ALSA: usb-audio: More strict sanity checks for clock parsers
ALSA: usb-audio: Refactor clock finder helpers
Linus Torvalds [Tue, 10 Apr 2018 17:10:30 +0000 (10:10 -0700)]
Merge tag 'media/v4.17-2' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"A series of media updates/fixes for 4.17.
There are two important core fix patches in this series:
- A regression fix on Kernel 4.16 with causes it to not work with
some input devices that depend on media core
- A fix at compat32 bits with causes it to OOPS on overlay, and
affects the Kernels where the CVE-2017-13166 was backported
The remaining ones are other random fixes at the documentation and on
drivers.
The biggest part of this series is a set of 18 patches for the Intel
atomisp driver. Currently, it produces hundreds of warnings/errors on
sparse/smatch, causing me to sometimes ignore new warnings on other
drivers that are not so broken. This driver is on really poor state,
even for staging standards: it has several layers of abstraction on
it, and it supports two different hardware. Selecting between them
require to add a define (there isn't even a Kconfig option for such
purpose). Just on this smatch cleanup, I could easily get rid of 8
"do-nothing" files. So, I'm seriously considering its removal from
upstream, if I don't see any real work on addressing the problems
there along this year"
* tag 'media/v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (48 commits)
media: v4l2-core: fix size of devnode_nums[] bitarray
media: v4l2-compat-ioctl32: don't oops on overlay
media: i2c: adv748x: afe: fix sparse warning
media: extended-controls.rst: transmitter -> receiver
media: staging: atomisp: stop duplicating input format types
media: staging: atomisp: get rid of an unused var
media: staging: atomisp: stop mixing enum types
media: staging: atomisp: get rid of some static warnings
media: staging: atomisp: use %p to print pointers
media: staging: atomisp: remove an useless check
media: staging: atomisp: avoid a warning if 32 bits build
media: staging: atomisp: don't access a NULL var
media: staging: atomisp: Get rid of *default.host.[ch]
media: staging: atomisp: get rid of an unused function
media: staging: atomisp: remove unused set_pd_base()
media: staging: atomisp: fix endianess issues
media: staging: atomisp: add a missing include
media: staging: atomisp: get rid of stupid statements
media: staging: atomisp: declare static vars as such
media: staging: atomisp: ia_css_output.host: don't use var before check
...
Luc Van Oostenryck [Tue, 31 Oct 2017 17:22:02 +0000 (18:22 +0100)]
c6x: pass endianness info to sparse
c6x depends on the macro '_BIG_ENDIAN' being defined or not
to correctly select or define endian-specific macros, structures
or pieces of code.
This macro is predefined by the compiler but sparse knows nothing
about it and thus may pre-process files differently from what
gcc would.
Fix this by passing '-D_BIG_ENDIAN' when compiling a big-endian
kernel, like GCC would have done.
To: Mark Salter <msalter@redhat.com>
To: Aurelien Jacquiot <a-jacquiot@ti.com>
CC: linux-c6x-dev@linux-c6x.org
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Mark Salter <msalter@redhat.com>
Randy Dunlap [Fri, 19 Jan 2018 19:19:33 +0000 (11:19 -0800)]
c6x: fix platforms/plldata.c get_coreid build error
Fix build error reported by the 0day bot by including the header
file for that macro.
Fixes this build error: (should fix; not tested)
arch/c6x/platforms/plldata.c: In function 'c6472_setup_clocks':
arch/c6x/platforms/plldata.c:279:33: error: implicit declaration of function 'get_coreid'; did you mean 'get_order'? [-Werror=implicit-function-declaration]
c6x_core_clk.parent = &sysclks[get_coreid() + 1];
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com>
Cc: linux-c6x-dev@linux-c6x.org
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mark Salter <msalter@redhat.com>
Jérémy Lefaure [Mon, 4 Sep 2017 19:14:12 +0000 (15:14 -0400)]
c6x: remove unused KTHREAD_SIZE definition
KTHREAD_SIZE has never been used since it has been defined for c6x arch.
Let's remove this useless definition.
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Mark Salter <msalter@redhat.com>
Linus Torvalds [Tue, 10 Apr 2018 02:59:54 +0000 (19:59 -0700)]
Merge tag 'hwmon-for-linus-v4.17' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
- added chip support: new Centaur CPUs, ADM1272, NCT6796D
- ucd9000: added debugfs attributes, gpio support
- cleanup and minor bug fixes
* tag 'hwmon-for-linus-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (via-cputemp) support new centaur CPUs
hwmon: (nct6775) Fix writing pwmX_mode
hwmon: (lm92) Add max6635 to lm92_id[]
hwmon: (pmbus/adm1275) Add support for ADM1272
hwmon: (lm92) Do not try to detect MAX6635
hwmon: (ucd9000) Add debugfs attributes to provide mfr_status
hwmon: (ucd9000) Add gpio chip interface
hwmon: (nct6775) Add support for NCT6796D
hwmon: (nct6775) Initialize boolean variables with declaration
hwmon: (nct6775) Improve fan6/pwm6 support
hwmon: (nct6775) Use NUM_FAN consistently
hwmon: (g762) handle cleanup with devm_add_action
hwmon: (sht3x) Update data sheet URL
hwmon: (sht21) Update data sheet URLs
hwmon: (pmbus/adm1275) Accept negative page register values
hwmon: (pmbus/max8688) Accept negative page register values
Linus Torvalds [Tue, 10 Apr 2018 00:04:10 +0000 (17:04 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) The sockmap code has to free socket memory on close if there is
corked data, from John Fastabend.
2) Tunnel names coming from userspace need to be length validated. From
Eric Dumazet.
3) arp_filter() has to take VRFs properly into account, from Miguel
Fadon Perlines.
4) Fix oops in error path of tcf_bpf_init(), from Davide Caratti.
5) Missing idr_remove() in u32_delete_key(), from Cong Wang.
6) More syzbot stuff. Several use of uninitialized value fixes all
over, from Eric Dumazet.
7) Do not leak kernel memory to userspace in sctp, also from Eric
Dumazet.
8) Discard frames from unused ports in DSA, from Andrew Lunn.
9) Fix DMA mapping and reset/failover problems in ibmvnic, from Thomas
Falcon.
10) Do not access dp83640 PHY registers prematurely after reset, from
Esben Haabendal.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits)
vhost-net: set packet weight of tx polling to 2 * vq size
net: thunderx: rework mac addresses list to u64 array
inetpeer: fix uninit-value in inet_getpeer
dp83640: Ensure against premature access to PHY registers after reset
devlink: convert occ_get op to separate registration
ARM: dts: ls1021a: Specify TBIPA register address
net/fsl_pq_mdio: Allow explicit speficition of TBIPA address
ibmvnic: Do not reset CRQ for Mobility driver resets
ibmvnic: Fix failover case for non-redundant configuration
ibmvnic: Fix reset scheduler error handling
ibmvnic: Zero used TX descriptor counter on reset
ibmvnic: Fix DMA mapping mistakes
tipc: use the right skb in tipc_sk_fill_sock_diag()
sctp: sctp_sockaddr_af must check minimal addr length for AF_INET6
net: dsa: Discard frames from unused ports
sctp: do not leak kernel memory to user space
soreuseport: initialise timewait reuseport field
ipv4: fix uninit-value in ip_route_output_key_hash_rcu()
dccp: initialize ireq->ir_mark
net: fix uninit-value in __hw_addr_add_ex()
...
Linus Torvalds [Mon, 9 Apr 2018 19:48:05 +0000 (12:48 -0700)]
Merge branch 'work.namei' of git://git./linux/kernel/git/viro/vfs
Pull vfs namei updates from Al Viro:
- make lookup_one_len() safe with parent locked only shared(incoming
afs series wants that)
- fix of getname_kernel() regression from 2015 (-stable fodder, that
one).
* 'work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
getname_kernel() needs to make sure that ->name != ->iname in long case
make lookup_one_len() safe to use with directory locked shared
new helper: __lookup_slow()
merge common parts of lookup_one_len{,_unlocked} into common helper
Linus Torvalds [Mon, 9 Apr 2018 19:45:47 +0000 (12:45 -0700)]
Merge tag 'for-linus-4.17-ofs' of git://git./linux/kernel/git/hubcap/linux
Pull orangefs updates from Mike Marshall:
"Fixes and cleanups:
- Documentation cleanups
- removal of unused code
- make some structs static
- implement Orangefs vm_operations fault callout
- eliminate two single-use functions and put their cleaned up code in
line.
- replace a vmalloc/memset instance with vzalloc
- fix a race condition bug in wait code"
* tag 'for-linus-4.17-ofs' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
Orangefs: documentation updates
orangefs: document package install and xfstests procedure
orangefs: remove unused code
orangefs: make several *_operations structs static
orangefs: implement vm_ops->fault
orangefs: open code short single-use functions
orangefs: replace vmalloc and memset with vzalloc
orangefs: bug fix for a race condition when getting a slot
Linus Torvalds [Mon, 9 Apr 2018 19:43:18 +0000 (12:43 -0700)]
Merge tag 'pstore-v4.17-rc1-fix' of git://git./linux/kernel/git/kees/linux
Pull pstore fix from Kees Cook:
"Fix another compression Kconfig combination missed in testing (Tobias
Regnery)"
* tag 'pstore-v4.17-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore: fix crypto dependencies without compression
Stephen Smalley [Mon, 9 Apr 2018 18:36:05 +0000 (14:36 -0400)]
selinux: fix missing dput() before selinuxfs unmount
Commit
0619f0f5e36f ("selinux: wrap selinuxfs state") triggers a BUG
when SELinux is runtime-disabled (i.e. systemd or equivalent disables
SELinux before initial policy load via /sys/fs/selinux/disable based on
/etc/selinux/config SELINUX=disabled).
This does not manifest if SELinux is disabled via kernel command line
argument or if SELinux is enabled (permissive or enforcing).
Before:
SELinux: Disabled at runtime.
BUG: Dentry
000000006d77e5c7{i=17,n=null} still in use (1) [unmount of selinuxfs selinuxfs]
After:
SELinux: Disabled at runtime.
Fixes:
0619f0f5e36f ("selinux: wrap selinuxfs state")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 9 Apr 2018 18:42:31 +0000 (11:42 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- VHE optimizations
- EL2 address space randomization
- speculative execution mitigations ("variant 3a", aka execution past
invalid privilege register access)
- bugfixes and cleanups
PPC:
- improvements for the radix page fault handler for HV KVM on POWER9
s390:
- more kvm stat counters
- virtio gpu plumbing
- documentation
- facilities improvements
x86:
- support for VMware magic I/O port and pseudo-PMCs
- AMD pause loop exiting
- support for AMD core performance extensions
- support for synchronous register access
- expose nVMX capabilities to userspace
- support for Hyper-V signaling via eventfd
- use Enlightened VMCS when running on Hyper-V
- allow userspace to disable MWAIT/HLT/PAUSE vmexits
- usual roundup of optimizations and nested virtualization bugfixes
Generic:
- API selftest infrastructure (though the only tests are for x86 as
of now)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (174 commits)
kvm: x86: fix a prototype warning
kvm: selftests: add sync_regs_test
kvm: selftests: add API testing infrastructure
kvm: x86: fix a compile warning
KVM: X86: Add Force Emulation Prefix for "emulate the next instruction"
KVM: X86: Introduce handle_ud()
KVM: vmx: unify adjacent #ifdefs
x86: kvm: hide the unused 'cpu' variable
KVM: VMX: remove bogus WARN_ON in handle_ept_misconfig
Revert "KVM: X86: Fix SMRAM accessing even if VM is shutdown"
kvm: Add emulation for movups/movupd
KVM: VMX: raise internal error for exception during invalid protected mode state
KVM: nVMX: Optimization: Dont set KVM_REQ_EVENT when VMExit with nested_run_pending
KVM: nVMX: Require immediate-exit when event reinjected to L2 and L1 event pending
KVM: x86: Fix misleading comments on handling pending exceptions
KVM: x86: Rename interrupt.pending to interrupt.injected
KVM: VMX: No need to clear pending NMI/interrupt on inject realmode interrupt
x86/kvm: use Enlightened VMCS when running on Hyper-V
x86/hyper-v: detect nested features
x86/hyper-v: define struct hv_enlightened_vmcs and clean field bits
...
Dan Williams [Mon, 9 Apr 2018 17:50:17 +0000 (10:50 -0700)]
Merge branch 'for-4.17/dax' into libnvdimm-for-next
Dan Williams [Mon, 9 Apr 2018 17:50:08 +0000 (10:50 -0700)]
Merge branch 'for-4.17/libnvdimm' into libnvdimm-for-next
Linus Torvalds [Mon, 9 Apr 2018 17:34:07 +0000 (10:34 -0700)]
Fix subtle macro variable shadowing in min_not_zero()
Commit
3c8ba0d61d04 ("kernel.h: Retain constant expression output for
max()/min()") rewrote our min/max macros to be very clever, but in the
meantime resurrected a variable name shadow issue that we had had
previously fixed in commit
589a9785ee3a ("min/max: remove sparse
warnings when they're nested").
That commit talks about the sparse warnings that this shadowing causes,
which we ignored as just a minor annoyance. But it turns out that the
sparse warning is the least of our problems. We actually have a real
bug due to the shadowing through the interaction with "min_not_zero()",
which ends up doing
min(__x, __y)
internally, and then the new declaration of "__x" and "__y" as new
variables in __cmp_once() results in a complete mess of an expression,
and "min_not_zero()" doesn't work at all.
For some odd reason, this only ever caused (reported) problems on s390,
even though it is a generic issue and most of the (obviously successful)
testing of the problematic commit had happened on other architectures.
Quoting Sebastian Ott:
"What happened is that the bio build by the partition detection code
was attempted to be split by the block layer because the block queue
had a max_sector setting of 0. blk_queue_max_hw_sectors uses
min_not_zero."
So re-introduce the use of __UNIQUE_ID() to make sure that the min/max
macros do not have these kinds of clashes.
[ That said, __UNIQUE_ID() itself has several issues that make it less
than wonderful.
In particular, the "uniqueness" has a fallback on the line number,
which means that it's not actually unique in more complex cases if you
don't build with gcc or clang (which have working unique counters that
aren't tied to line numbers).
That historical broken fallback also means that we have that pointless
"prefix" argument that doesn't actually make much sense _except_ for
the known-broken case. Oh well. ]
Fixes:
3c8ba0d61d04 ("kernel.h: Retain constant expression output for max()/min()")
Reported-and-tested-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 9 Apr 2018 16:26:36 +0000 (09:26 -0700)]
Merge branch 'for-linus-sa1100' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM SA1100 updates from Russell King:
"We have support for arbitary MMIO registers providing platform GPIOs,
which allows us to abstract some of the SA11x0 CF support.
This set of updates makes that change"
* 'for-linus-sa1100' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: sa1100/simpad: switch simpad CF to use gpiod APIs
ARM: sa1100/shannon: convert to generic CF sockets
ARM: sa1100/nanoengine: convert to generic CF sockets
ARM: sa1100/h3xxx: switch h3xxx PCMCIA to use gpiod APIs
ARM: sa1100/cerf: convert to generic CF sockets
ARM: sa1100/assabet: convert to generic CF sockets
ARM: sa1100: provide infrastructure to support generic CF sockets
pcmcia: sa1100: provide generic CF support
Linus Torvalds [Mon, 9 Apr 2018 16:19:30 +0000 (09:19 -0700)]
Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
"A number of core ARM changes:
- Refactoring linker script by Nicolas Pitre
- Enable source fortification
- Add support for Cortex R8"
* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: decompressor: fix warning introduced in fortify patch
ARM: 8751/1: Add support for Cortex-R8 processor
ARM: 8749/1: Kconfig: Add ARCH_HAS_FORTIFY_SOURCE
ARM: simplify and fix linker script for TCM
ARM: linker script: factor out TCM bits
ARM: linker script: factor out vectors and stubs
ARM: linker script: factor out unwinding table sections
ARM: linker script: factor out stuff for the .text section
ARM: linker script: factor out stuff for the DISCARD section
ARM: linker script: factor out some common definitions between XIP and non-XIP
Linus Torvalds [Mon, 9 Apr 2018 16:15:46 +0000 (09:15 -0700)]
Merge branch 'for-next' of git://git./linux/kernel/git/gerg/m68knommu
Pull m68knommu update from Greg Ungerer:
"Only a single fix to set the DMA masks in the ColdFire FEC platform
data structure.
This stops the warning from dma-mapping.h at boot time"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: set dma and coherent masks for platform FEC ethernets
Linus Torvalds [Mon, 9 Apr 2018 16:11:32 +0000 (09:11 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mattst88/alpha
Pull alpha updates from Matt Turner:
"A few small changes for alpha"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
alpha: io: reorder barriers to guarantee writeX() and iowriteX() ordering
alpha: Implement CPU vulnerabilities sysfs functions.
alpha: rtc: stop validating rtc_time in .read_time
alpha: rtc: remove unused set_mmss ops
Dan Williams [Mon, 9 Apr 2018 16:10:22 +0000 (09:10 -0700)]
libnvdimm, of_pmem: workaround OF_NUMA=n build error
Stephen reports that an x86 allmodconfig build fails to build the
of_pmem driver due to a missing definition of of_node_to_nid(). That
helper is currently only exported in the OF_NUMA=y case. In other cases,
ppc and sparc, it is a weak symbol, and outside of those platforms it is
a static inline.
Until an OF_NUMA=n configuration can reliably support usage of
of_node_to_nid() in modules across architectures, mark this driver as
'bool' instead of 'tristate'.
Cc: Rob Herring <robh@kernel.org>
Cc: Oliver O'Halloran <oohall@gmail.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Linus Torvalds [Mon, 9 Apr 2018 16:04:10 +0000 (09:04 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
- Improvements for the spectre defense:
* The spectre related code is consolidated to a single file
nospec-branch.c
* Automatic enable/disable for the spectre v2 defenses (expoline vs.
nobp)
* Syslog messages for specve v2 are added
* Enable CONFIG_GENERIC_CPU_VULNERABILITIES and define the attribute
functions for spectre v1 and v2
- Add helper macros for assembler alternatives and use them to shorten
the code in entry.S.
- Add support for persistent configuration data via the SCLP Store Data
interface. The H/W interface requires a page table that uses 4K pages
only, the code to setup such an address space is added as well.
- Enable virtio GPU emulation in QEMU. To do this the depends
statements for a few common Kconfig options are modified.
- Add support for format-3 channel path descriptors and add a binary
sysfs interface to export the associated utility strings.
- Add a sysfs attribute to control the IFCC handling in case of
constant channel errors.
- The vfio-ccw changes from Cornelia.
- Bug fixes and cleanups.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (40 commits)
s390/kvm: improve stack frame constants in entry.S
s390/lpp: use assembler alternatives for the LPP instruction
s390/entry.S: use assembler alternatives
s390: add assembler macros for CPU alternatives
s390: add sysfs attributes for spectre
s390: report spectre mitigation via syslog
s390: add automatic detection of the spectre defense
s390: move nobp parameter functions to nospec-branch.c
s390/cio: add util_string sysfs attribute
s390/chsc: query utility strings via fmt3 channel path descriptor
s390/cio: rename struct channel_path_desc
s390/cio: fix unbind of io_subchannel_driver
s390/qdio: split up CCQ handling for EQBS / SQBS
s390/qdio: don't retry EQBS after CCQ 96
s390/qdio: restrict buffer merging to eligible devices
s390/qdio: don't merge ERROR output buffers
s390/qdio: simplify math in get_*_buffer_frontier()
s390/decompressor: trim uncompressed image head during the build
s390/crypto: Fix kernel crash on aes_s390 module remove.
s390/defkeymap: fix global init to zero
...
Takashi Iwai [Mon, 9 Apr 2018 15:12:16 +0000 (17:12 +0200)]
ALSA: pcm: Remove WARN_ON() at snd_pcm_hw_params() error
snd_pcm_hw_params() (more exactly snd_pcm_hw_params_choose()) contains
a check of the return error from snd_pcm_hw_param_first() and _last()
with snd_BUG_ON() -- i.e. it may trigger WARN_ON() depending on the
kconfig.
This was a valid check in the past, as these functions shouldn't
return any error if the parameters have been already refined via
snd_pcm_hw_refine() beforehand. However, the recent rewrite
introduced a kmalloc() in snd_pcm_hw_refine() for removing VLA, and
this brought a possibility to trigger an error. As a result, syzbot
caught lots of superfluous kernel WARN_ON() and paniced via fault
injection.
As the WARN_ON() is no longer valid with the introduction of
kmalloc(), let's drop snd_BUG_ON() check, in order to make the world
peaceful place again.
Reported-by: syzbot+803e0047ac3a3096bb4f@syzkaller.appspotmail.com
Fixes:
5730f9f744cf ("ALSA: pcm: Remove VLA usage")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
haibinzhang(å¼ æµ·æ–Œ) [Mon, 9 Apr 2018 07:22:17 +0000 (07:22 +0000)]
vhost-net: set packet weight of tx polling to 2 * vq size
handle_tx will delay rx for tens or even hundreds of milliseconds when tx busy
polling udp packets with small length(e.g. 1byte udp payload), because setting
VHOST_NET_WEIGHT takes into account only sent-bytes but no single packet length.
Ping-Latencies shown below were tested between two Virtual Machines using
netperf (UDP_STREAM, len=1), and then another machine pinged the client:
vq size=256
Packet-Weight Ping-Latencies(millisecond)
min avg max
Origin 3.319 18.489 57.303
64 1.643 2.021 2.552
128 1.825 2.600 3.224
256 1.997 2.710 4.295
512 1.860 3.171 4.631
1024 2.002 4.173 9.056
2048 2.257 5.650 9.688
4096 2.093 8.508 15.943
vq size=512
Packet-Weight Ping-Latencies(millisecond)
min avg max
Origin 6.537 29.177 66.245
64 2.798 3.614 4.403
128 2.861 3.820 4.775
256 3.008 4.018 4.807
512 3.254 4.523 5.824
1024 3.079 5.335 7.747
2048 3.944 8.201 12.762
4096 4.158 11.057 19.985
Seems pretty consistent, a small dip at 2 VQ sizes.
Ring size is a hint from device about a burst size it can tolerate. Based on
benchmarks, set the weight to 2 * vq size.
To evaluate this change, another tests were done using netperf(RR, TX) between
two machines with Intel(R) Xeon(R) Gold 6133 CPU @ 2.50GHz, and vq size was
tweaked through qemu. Results shown below does not show obvious changes.
vq size=256 TCP_RR vq size=512 TCP_RR
size/sessions/+thu%/+normalize% size/sessions/+thu%/+normalize%
1/ 1/ -7%/ -2% 1/ 1/ 0%/ -2%
1/ 4/ +1%/ 0% 1/ 4/ +1%/ 0%
1/ 8/ +1%/ -2% 1/ 8/ 0%/ +1%
64/ 1/ -6%/ 0% 64/ 1/ +7%/ +3%
64/ 4/ 0%/ +2% 64/ 4/ -1%/ +1%
64/ 8/ 0%/ 0% 64/ 8/ -1%/ -2%
256/ 1/ -3%/ -4% 256/ 1/ -4%/ -2%
256/ 4/ +3%/ +4% 256/ 4/ +1%/ +2%
256/ 8/ +2%/ 0% 256/ 8/ +1%/ -1%
vq size=256 UDP_RR vq size=512 UDP_RR
size/sessions/+thu%/+normalize% size/sessions/+thu%/+normalize%
1/ 1/ -5%/ +1% 1/ 1/ -3%/ -2%
1/ 4/ +4%/ +1% 1/ 4/ -2%/ +2%
1/ 8/ -1%/ -1% 1/ 8/ -1%/ 0%
64/ 1/ -2%/ -3% 64/ 1/ +1%/ +1%
64/ 4/ -5%/ -1% 64/ 4/ +2%/ 0%
64/ 8/ 0%/ -1% 64/ 8/ -2%/ +1%
256/ 1/ +7%/ +1% 256/ 1/ -7%/ 0%
256/ 4/ +1%/ +1% 256/ 4/ -3%/ -4%
256/ 8/ +2%/ +2% 256/ 8/ +1%/ +1%
vq size=256 TCP_STREAM vq size=512 TCP_STREAM
size/sessions/+thu%/+normalize% size/sessions/+thu%/+normalize%
64/ 1/ 0%/ -3% 64/ 1/ 0%/ 0%
64/ 4/ +3%/ -1% 64/ 4/ -2%/ +4%
64/ 8/ +9%/ -4% 64/ 8/ -1%/ +2%
256/ 1/ +1%/ -4% 256/ 1/ +1%/ +1%
256/ 4/ -1%/ -1% 256/ 4/ -3%/ 0%
256/ 8/ +7%/ +5% 256/ 8/ -3%/ 0%
512/ 1/ +1%/ 0% 512/ 1/ -1%/ -1%
512/ 4/ +1%/ -1% 512/ 4/ 0%/ 0%
512/ 8/ +7%/ -5% 512/ 8/ +6%/ -1%
1024/ 1/ 0%/ -1% 1024/ 1/ 0%/ +1%
1024/ 4/ +3%/ 0% 1024/ 4/ +1%/ 0%
1024/ 8/ +8%/ +5% 1024/ 8/ -1%/ 0%
2048/ 1/ +2%/ +2% 2048/ 1/ -1%/ 0%
2048/ 4/ +1%/ 0% 2048/ 4/ 0%/ -1%
2048/ 8/ -2%/ 0% 2048/ 8/ 5%/ -1%
4096/ 1/ -2%/ 0% 4096/ 1/ -2%/ 0%
4096/ 4/ +2%/ 0% 4096/ 4/ 0%/ 0%
4096/ 8/ +9%/ -2% 4096/ 8/ -5%/ -1%
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Haibin Zhang <haibinzhang@tencent.com>
Signed-off-by: Yunfang Tai <yunfangtai@tencent.com>
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Lomovtsev [Mon, 9 Apr 2018 13:24:48 +0000 (06:24 -0700)]
net: thunderx: rework mac addresses list to u64 array
It is too expensive to pass u64 values via linked list, instead
allocate array for them by overall number of mac addresses from netdev.
This eventually removes multiple kmalloc() calls, aviod memory
fragmentation and allow to put single null check on kmalloc
return value in order to prevent a potential null pointer dereference.
Addresses-Coverity-ID: 1467429 ("Dereference null return value")
Fixes:
37c3347eb247 ("net: thunderx: add ndo_set_rx_mode callback implementation for VF")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 9 Apr 2018 13:43:27 +0000 (06:43 -0700)]
inetpeer: fix uninit-value in inet_getpeer
syzbot/KMSAN reported that p->dtime was read while it was
not yet initialized in :
delta = (__u32)jiffies - p->dtime;
if (delta < ttl || !refcount_dec_if_one(&p->refcnt))
gc_stack[i] = NULL;
This is a false positive, because the inetpeer wont be erased
from rb-tree if the refcount_dec_if_one(&p->refcnt) does not
succeed. And this wont happen before first inet_putpeer() call
for this inetpeer has been done, and ->dtime field is written
exactly before the refcount_dec_and_test(&p->refcnt).
The KMSAN report was :
BUG: KMSAN: uninit-value in inet_peer_gc net/ipv4/inetpeer.c:163 [inline]
BUG: KMSAN: uninit-value in inet_getpeer+0x1567/0x1e70 net/ipv4/inetpeer.c:228
CPU: 0 PID: 9494 Comm: syz-executor5 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
inet_peer_gc net/ipv4/inetpeer.c:163 [inline]
inet_getpeer+0x1567/0x1e70 net/ipv4/inetpeer.c:228
inet_getpeer_v4 include/net/inetpeer.h:110 [inline]
icmpv4_xrlim_allow net/ipv4/icmp.c:330 [inline]
icmp_send+0x2b44/0x3050 net/ipv4/icmp.c:725
ip_options_compile+0x237c/0x29f0 net/ipv4/ip_options.c:472
ip_rcv_options net/ipv4/ip_input.c:284 [inline]
ip_rcv_finish+0xda8/0x16d0 net/ipv4/ip_input.c:365
NF_HOOK include/linux/netfilter.h:288 [inline]
ip_rcv+0x119d/0x16f0 net/ipv4/ip_input.c:493
__netif_receive_skb_core+0x47cf/0x4a80 net/core/dev.c:4562
__netif_receive_skb net/core/dev.c:4627 [inline]
netif_receive_skb_internal+0x49d/0x630 net/core/dev.c:4701
netif_receive_skb+0x230/0x240 net/core/dev.c:4725
tun_rx_batched drivers/net/tun.c:1555 [inline]
tun_get_user+0x6d88/0x7580 drivers/net/tun.c:1962
tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990
do_iter_readv_writev+0x7bb/0x970 include/linux/fs.h:1776
do_iter_write+0x30d/0xd40 fs/read_write.c:932
vfs_writev fs/read_write.c:977 [inline]
do_writev+0x3c9/0x830 fs/read_write.c:1012
SYSC_writev+0x9b/0xb0 fs/read_write.c:1085
SyS_writev+0x56/0x80 fs/read_write.c:1082
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x455111
RSP: 002b:
00007fae0365cba0 EFLAGS:
00000293 ORIG_RAX:
0000000000000014
RAX:
ffffffffffffffda RBX:
000000000000002e RCX:
0000000000455111
RDX:
0000000000000001 RSI:
00007fae0365cbf0 RDI:
00000000000000fc
RBP:
0000000020000040 R08:
00000000000000fc R09:
0000000000000000
R10:
000000000000002e R11:
0000000000000293 R12:
00000000ffffffff
R13:
0000000000000658 R14:
00000000006fc8e0 R15:
0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
kmem_cache_alloc+0xaab/0xb90 mm/slub.c:2756
inet_getpeer+0xed8/0x1e70 net/ipv4/inetpeer.c:210
inet_getpeer_v4 include/net/inetpeer.h:110 [inline]
ip4_frag_init+0x4d1/0x740 net/ipv4/ip_fragment.c:153
inet_frag_alloc net/ipv4/inet_fragment.c:369 [inline]
inet_frag_create net/ipv4/inet_fragment.c:385 [inline]
inet_frag_find+0x7da/0x1610 net/ipv4/inet_fragment.c:418
ip_find net/ipv4/ip_fragment.c:275 [inline]
ip_defrag+0x448/0x67a0 net/ipv4/ip_fragment.c:676
ip_check_defrag+0x775/0xda0 net/ipv4/ip_fragment.c:724
packet_rcv_fanout+0x2a8/0x8d0 net/packet/af_packet.c:1447
deliver_skb net/core/dev.c:1897 [inline]
deliver_ptype_list_skb net/core/dev.c:1912 [inline]
__netif_receive_skb_core+0x314a/0x4a80 net/core/dev.c:4545
__netif_receive_skb net/core/dev.c:4627 [inline]
netif_receive_skb_internal+0x49d/0x630 net/core/dev.c:4701
netif_receive_skb+0x230/0x240 net/core/dev.c:4725
tun_rx_batched drivers/net/tun.c:1555 [inline]
tun_get_user+0x6d88/0x7580 drivers/net/tun.c:1962
tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990
do_iter_readv_writev+0x7bb/0x970 include/linux/fs.h:1776
do_iter_write+0x30d/0xd40 fs/read_write.c:932
vfs_writev fs/read_write.c:977 [inline]
do_writev+0x3c9/0x830 fs/read_write.c:1012
SYSC_writev+0x9b/0xb0 fs/read_write.c:1085
SyS_writev+0x56/0x80 fs/read_write.c:1082
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King [Mon, 9 Apr 2018 09:08:51 +0000 (10:08 +0100)]
Merge branches 'devel-stable' and 'misc' into for-linus
Esben Haabendal [Sun, 8 Apr 2018 20:17:01 +0000 (22:17 +0200)]
dp83640: Ensure against premature access to PHY registers after reset
The datasheet specifies a 3uS pause after performing a software
reset. The default implementation of genphy_soft_reset() does not
provide this, so implement soft_reset with the needed pause.
Signed-off-by: Esben Haabendal <eha@deif.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 8 Apr 2018 23:51:41 +0000 (19:51 -0400)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2018-04-09
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Two sockmap fixes: i) fix a potential warning when a socket with
pending cork data is closed by freeing the memory right when the
socket is closed instead of seeing still outstanding memory at
garbage collector time, ii) fix a NULL pointer deref in case of
duplicates release calls, so make sure to only reset the sk_prot
pointer when it's in a valid state to do so, both from John.
2) Fix a compilation warning in bpf_prog_attach_check_attach_type()
by moving the function under CONFIG_CGROUP_BPF ifdef since only
used there, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 8 Apr 2018 21:19:15 +0000 (17:19 -0400)]
Merge branch 'for-upstream' of git://git./linux/kernel/git/bluetooth/bluetooth
Johan Hedberg says:
====================
pull request: bluetooth 2018-04-08
Here's one important Bluetooth fix for the 4.17-rc series that's needed
to pass several Bluetooth qualification test cases.
Let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Thu, 5 Apr 2018 20:13:21 +0000 (22:13 +0200)]
devlink: convert occ_get op to separate registration
This resolves race during initialization where the resources with
ops are registered before driver and the structures used by occ_get
op is initialized. So keep occ_get callbacks registered only when
all structs are initialized.
The example flows, as it is in mlxsw:
1) driver load/asic probe:
mlxsw_core
-> mlxsw_sp_resources_register
-> mlxsw_sp_kvdl_resources_register
-> devlink_resource_register IDX
mlxsw_spectrum
-> mlxsw_sp_kvdl_init
-> mlxsw_sp_kvdl_parts_init
-> mlxsw_sp_kvdl_part_init
-> devlink_resource_size_get IDX (to get the current setup
size from devlink)
-> devlink_resource_occ_get_register IDX (register current
occupancy getter)
2) reload triggered by devlink command:
-> mlxsw_devlink_core_bus_device_reload
-> mlxsw_sp_fini
-> mlxsw_sp_kvdl_fini
-> devlink_resource_occ_get_unregister IDX
(struct mlxsw_sp *mlxsw_sp is freed at this point, call to occ get
which is using mlxsw_sp would cause use-after free)
-> mlxsw_sp_init
-> mlxsw_sp_kvdl_init
-> mlxsw_sp_kvdl_parts_init
-> mlxsw_sp_kvdl_part_init
-> devlink_resource_size_get IDX (to get the current setup
size from devlink)
-> devlink_resource_occ_get_register IDX (register current
occupancy getter)
Fixes:
d9f9b9a4d05f ("devlink: Add support for resource abstraction")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Esben Haabendal [Fri, 6 Apr 2018 12:46:35 +0000 (14:46 +0200)]
ARM: dts: ls1021a: Specify TBIPA register address
The current (mildly evil) fsl_pq_mdio code uses an undocumented shadow of
the TBIPA register on LS1021A, which happens to be read-only.
Changing TBI PHY address therefore does not work on LS1021A.
The real (and documented) address of the TBIPA registere lies in the eTSEC
block and not in MDIO/MII, which is read/write, so using that fixes
the problem.
Signed-off-by: Esben Haabendal <eha@deif.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Esben Haabendal [Fri, 6 Apr 2018 12:38:34 +0000 (14:38 +0200)]
net/fsl_pq_mdio: Allow explicit speficition of TBIPA address
This introduces a simpler and generic method for for finding (and mapping)
the TBIPA register.
Instead of relying of complicated logic for finding the TBIPA register
address based on the MDIO or MII register block base
address, which even in some cases relies on undocumented shadow registers,
a second "reg" entry for the mdio bus devicetree node specifies the TBIPA
register.
Backwards compatibility is kept, as the existing logic is applied when
only a single "reg" mapping is specified.
Signed-off-by: Esben Haabendal <eha@deif.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 8 Apr 2018 16:39:47 +0000 (12:39 -0400)]
Merge branch 'ibmvnic-Fix-driver-reset-and-DMA-bugs'
Thomas Falcon says:
====================
ibmvnic: Fix driver reset and DMA bugs
This patch series introduces some fixes to the driver reset
routines and a patch that fixes mistakes caught by the kernel
DMA debugger.
The reset fixes include a fix to reset TX queue counters properly
after a reset as well as updates to driver reset error-handling code.
It also provides updates to the reset handling routine for redundant
backing VF failover and partition migration cases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nathan Fontenot [Fri, 6 Apr 2018 23:37:06 +0000 (18:37 -0500)]
ibmvnic: Do not reset CRQ for Mobility driver resets
When resetting the ibmvnic driver after a partition migration occurs
there is no requirement to do a reset of the main CRQ. The current
driver code does the required re-enable of the main CRQ, then does
a reset of the main CRQ later.
What we should be doing for a driver reset after a migration is to
re-enable the main CRQ, release all the sub-CRQs, and then allocate
new sub-CRQs after capability negotiation.
This patch updates the handling of mobility resets to do the proper
work and not reset the main CRQ. To do this the initialization/reset
of the main CRQ had to be moved out of the ibmvnic_init routine
and in to the ibmvnic_probe and do_reset routines.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Fri, 6 Apr 2018 23:37:05 +0000 (18:37 -0500)]
ibmvnic: Fix failover case for non-redundant configuration
There is a failover case for a non-redundant pseries VNIC
configuration that was not being handled properly. The current
implementation assumes that the driver will always have a redandant
device to communicate with following a failover notification. There
are cases, however, when a non-redundant configuration can receive
a failover request. If that happens, the driver should wait until
it receives a signal that the device is ready for operation.
The driver is agnostic of its backing hardware configuration,
so this fix necessarily affects all device failover management.
The driver needs to wait until it receives a signal that the device
is ready for resetting. A flag is introduced to track this intermediary
state where the driver is waiting for an active device.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Fri, 6 Apr 2018 23:37:04 +0000 (18:37 -0500)]
ibmvnic: Fix reset scheduler error handling
In some cases, if the driver is waiting for a reset following
a device parameter change, failure to schedule a reset can result
in a hang since a completion signal is never sent.
If the device configuration is being altered by a tool such
as ethtool or ifconfig, it could cause the console to hang
if the reset request does not get scheduled. Add some additional
error handling code to exit the wait_for_completion if there is
one in progress.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Fri, 6 Apr 2018 23:37:03 +0000 (18:37 -0500)]
ibmvnic: Zero used TX descriptor counter on reset
The counter that tracks used TX descriptors pending completion
needs to be zeroed as part of a device reset. This change fixes
a bug causing transmit queues to be stopped unnecessarily and in
some cases a transmit queue stall and timeout reset. If the counter
is not reset, the remaining descriptors will not be "removed",
effectively reducing queue capacity. If the queue is over half full,
it will cause the queue to stall if stopped.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Falcon [Fri, 6 Apr 2018 23:37:02 +0000 (18:37 -0500)]
ibmvnic: Fix DMA mapping mistakes
Fix some mistakes caught by the DMA debugger. The first change
fixes a unnecessary unmap that should have been removed in an
earlier update. The next hunk fixes another bad unmap by zeroing
the bit checked to determine that an unmap is needed. The final
change fixes some buffers that are unmapped with the wrong
direction specified.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Sat, 7 Apr 2018 01:54:52 +0000 (18:54 -0700)]
tipc: use the right skb in tipc_sk_fill_sock_diag()
Commit
4b2e6877b879 ("tipc: Fix namespace violation in tipc_sk_fill_sock_diag")
tried to fix the crash but failed, the crash is still 100% reproducible
with it.
In tipc_sk_fill_sock_diag(), skb is the diag dump we are filling, it is not
correct to retrieve its NETLINK_CB(), instead, like other protocol diag,
we should use NETLINK_CB(cb->skb).sk here.
Reported-by: <syzbot+326e587eff1074657718@syzkaller.appspotmail.com>
Fixes:
4b2e6877b879 ("tipc: Fix namespace violation in tipc_sk_fill_sock_diag")
Fixes:
c30b70deb5f4 (tipc: implement socket diagnostics for AF_TIPC)
Cc: GhantaKrishnamurthy MohanKrishna <mohan.krishna.ghanta.krishnamurthy@ericsson.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sun, 8 Apr 2018 14:52:08 +0000 (07:52 -0700)]
sctp: sctp_sockaddr_af must check minimal addr length for AF_INET6
Check must happen before call to ipv6_addr_v4mapped()
syzbot report was :
BUG: KMSAN: uninit-value in sctp_sockaddr_af net/sctp/socket.c:359 [inline]
BUG: KMSAN: uninit-value in sctp_do_bind+0x60f/0xdc0 net/sctp/socket.c:384
CPU: 0 PID: 3576 Comm: syzkaller968804 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
sctp_sockaddr_af net/sctp/socket.c:359 [inline]
sctp_do_bind+0x60f/0xdc0 net/sctp/socket.c:384
sctp_bind+0x149/0x190 net/sctp/socket.c:332
inet6_bind+0x1fd/0x1820 net/ipv6/af_inet6.c:293
SYSC_bind+0x3f2/0x4b0 net/socket.c:1474
SyS_bind+0x54/0x80 net/socket.c:1460
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x43fd49
RSP: 002b:
00007ffe99df3d28 EFLAGS:
00000213 ORIG_RAX:
0000000000000031
RAX:
ffffffffffffffda RBX:
00000000004002c8 RCX:
000000000043fd49
RDX:
0000000000000010 RSI:
0000000020000000 RDI:
0000000000000003
RBP:
00000000006ca018 R08:
00000000004002c8 R09:
00000000004002c8
R10:
00000000004002c8 R11:
0000000000000213 R12:
0000000000401670
R13:
0000000000401700 R14:
0000000000000000 R15:
0000000000000000
Local variable description: ----address@SYSC_bind
Variable was created at:
SYSC_bind+0x6f/0x4b0 net/socket.c:1461
SyS_bind+0x54/0x80 net/socket.c:1460
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Al Viro [Sun, 8 Apr 2018 15:57:10 +0000 (11:57 -0400)]
getname_kernel() needs to make sure that ->name != ->iname in long case
missed it in "kill struct filename.separate" several years ago.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Andrew Lunn [Sat, 7 Apr 2018 18:37:40 +0000 (20:37 +0200)]
net: dsa: Discard frames from unused ports
The Marvell switches under some conditions will pass a frame to the
host with the port being the CPU port. Such frames are invalid, and
should be dropped. Not dropping them can result in a crash when
incrementing the receive statistics for an invalid port.
Reported-by: Chris Healy <cphealy@gmail.com>
Fixes:
91da11f870f0 ("net: Distributed Switch Architecture protocol support")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sun, 8 Apr 2018 00:15:22 +0000 (17:15 -0700)]
sctp: do not leak kernel memory to user space
syzbot produced a nice report [1]
Issue here is that a recvmmsg() managed to leak 8 bytes of kernel memory
to user space, because sin_zero (padding field) was not properly cleared.
[1]
BUG: KMSAN: uninit-value in copy_to_user include/linux/uaccess.h:184 [inline]
BUG: KMSAN: uninit-value in move_addr_to_user+0x32e/0x530 net/socket.c:227
CPU: 1 PID: 3586 Comm: syzkaller481044 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
kmsan_internal_check_memory+0x164/0x1d0 mm/kmsan/kmsan.c:1176
kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199
copy_to_user include/linux/uaccess.h:184 [inline]
move_addr_to_user+0x32e/0x530 net/socket.c:227
___sys_recvmsg+0x4e2/0x810 net/socket.c:2211
__sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313
SYSC_recvmmsg+0x29b/0x3e0 net/socket.c:2394
SyS_recvmmsg+0x76/0xa0 net/socket.c:2378
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x4401c9
RSP: 002b:
00007ffc56f73098 EFLAGS:
00000217 ORIG_RAX:
000000000000012b
RAX:
ffffffffffffffda RBX:
00000000004002c8 RCX:
00000000004401c9
RDX:
0000000000000001 RSI:
0000000020003ac0 RDI:
0000000000000003
RBP:
00000000006ca018 R08:
0000000020003bc0 R09:
0000000000000010
R10:
0000000000000000 R11:
0000000000000217 R12:
0000000000401af0
R13:
0000000000401b80 R14:
0000000000000000 R15:
0000000000000000
Local variable description: ----addr@___sys_recvmsg
Variable was created at:
___sys_recvmsg+0xd5/0x810 net/socket.c:2172
__sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313
Bytes 8-15 of 16 are uninitialized
==================================================================
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 3586 Comm: syzkaller481044 Tainted: G B 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
panic+0x39d/0x940 kernel/panic.c:183
kmsan_report+0x238/0x240 mm/kmsan/kmsan.c:1083
kmsan_internal_check_memory+0x164/0x1d0 mm/kmsan/kmsan.c:1176
kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199
copy_to_user include/linux/uaccess.h:184 [inline]
move_addr_to_user+0x32e/0x530 net/socket.c:227
___sys_recvmsg+0x4e2/0x810 net/socket.c:2211
__sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313
SYSC_recvmmsg+0x29b/0x3e0 net/socket.c:2394
SyS_recvmmsg+0x76/0xa0 net/socket.c:2378
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 8 Apr 2018 02:32:32 +0000 (22:32 -0400)]
Merge branch 'net-fix-uninit-values-in-networking-stack'
Eric Dumazet says:
====================
net: fix uninit-values in networking stack
It seems syzbot got new features enabled, and fired some interesting
reports. Oh well.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / platform / kernel / linux-rpi.git / log