Fix compile error caused by missing timer function

Add #define CONFIG_MCFTMR in EB+MCF-EV123.h configuration file

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

Fix compile error caused by incorrect function return type

Rename int mii_init(void) to void mii_init(void)

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

ColdFire: Fix power up issue for MCF5235

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

ColdFire: Fix compiling error for MCF5275

The compiling error was caused by missing a closed parentheses
in speed.c

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

ColdFire: Fix timer issue for MCF5272

The timer was assigned to wrong timer memory mapped which
caused udelay() and timer() not working properly.

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

ColdFire: Change invalid JMP to BRA caught by new v4e toolchain

Signed-off-by: Kurt Mahan <kmahan@freescale.com>

ColdFire: Add -got=single param for new linux v4e toolchains

Signed-off-by: Kurt Mahan <kmahan@freescale.com>

ColdFire: Fix code flash configuration for M547x/M548x boards

Signed-off-by: Kurt Mahan <kmahan@freescale.com>

ColdFire: Fix warning messages by passing correct data type in board.c

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

ColdFire: Fix UART baudrate formula

The formula "counter = (u32) (gd->bus_clk / gd->baudrate) / 32"
can generate the wrong divisor due to integer division truncation.
Round the calculated divisor value by adding 1/2 the baudrate
before dividing by the baudrate.

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>

Fix some more print() format errors.

Signed-off-by: Wolfgang Denk <wd@denx.de>

silence misc printf formatting compiler warnings

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

Merge branch 'master' of git://git.denx.de/u-boot-mpc512x

Merge branch 'master' of git://denx.de/git/u-boot-mpc86xx

USB: shutdown USB before booting

This patch fixes a potentially serious issue related to USB which was
discouvered by Martin Krause <martin.krause@tqs.de> and fixed for
ARM920T. Martin wrote:

  Turn off USB to prevent the host controller from writing to the
  SDRAM while Linux is booting. This could happen, because the HCCA
  (Host Controller Communication Area) lies within the SDRAM and the
  host controller writes continously to this area (as busmaster!), for
  example to increase the HccaFrameNumber variable, which happens
  every 1 ms.

This is a slightly modified version of the patch in order to shutdown
USB when booting on all architectures.

Signed-off-by: Markus Klotzbuecher <mk@denx.de>

Configuration changes for ADS5121 Rev 3

ADS5121 Rev 3 board is now the default config

config targets are now

ads5121_config
    Rev 3 board with
PCI
M41T62 on board RTC
512MB DRAM

ads5121_rev2_config
    Rev 2 board with
No PCI
256MB DRAM

Signed-off-by: Martha Marx <mmarx@silicontkx.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: John Rigby <jrigby@freescale.com>

Consolidate ADS5121 IO Pin configuration

Consolidate ADS5121 IO Pin configuration to one file
board/ads5121/iopin.c.

Remove pin config from cpu/mpc512x/fec.c

Signed-off-by: Martha Marx <mmarx@silicontkx.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: John Rigby <jrigby@freescale.com>

Merge commit 'wd/master'

Fix "usb part" command

Only print partition for selected device if user supplied the <dev>
arg with the "usb part [dev]" command.

Signed-off-by: Christian Eggers <ceggers@gmx.de>
Acked-by: Markus Klotzbuecher <mk@denx.de>

fix USB devices with multiple configurations

This patch fixes bugs in usbdcore*.c related to the use of devices
with multiple configurations.

The original code made mistakes about the meaning of configuration value and
configuration index, and the resulting off-by-one errors resulted in:

* SET_CONFIGURATION always selected the first configuration, no matter what
  wValue is being passed.
* GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
  configuration (index 0).

Signed-off-by: Harald Welte <laforge@openmoko.org>
Acked-by: Markus Klotzbuecher <mk@denx.de>

Merge branch 'master' of ssh://10.10.0.7/home/wd/git/u-boot/master

Fix some more print() format errors.

Signed-off-by: Wolfgang Denk <wd@denx.de>

Fix "usb part" command

Only print partition for selected device if user supplied the <dev>
arg with the "usb part [dev]" command.

Signed-off-by: Christian Eggers <ceggers@gmx.de>
Acked-by: Markus Klotzbuecher <mk@denx.de>

fix USB devices with multiple configurations

This patch fixes bugs in usbdcore*.c related to the use of devices
with multiple configurations.

The original code made mistakes about the meaning of configuration value and
configuration index, and the resulting off-by-one errors resulted in:

* SET_CONFIGURATION always selected the first configuration, no matter what
  wValue is being passed.
* GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
  configuration (index 0).

Signed-off-by: Harald Welte <laforge@openmoko.org>
Acked-by: Markus Klotzbuecher <mk@denx.de>

Merge branch 'master' of git://denx.de/git/u-boot-ppc4xx

MTD/NAND: Fix printf format warning in nand code

This patch fixes NAND related printf format warning. Those warnings are
now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
[Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
really helpful.

Signed-off-by: Stefan Roese <sr@denx.de>

rtc: Fix printf format warning in m41t60.c

Signed-off-by: Stefan Roese <sr@denx.de>

pci: Move PCI device configuration check into a separate weak function

This patch moves the check, if a device should be skipped in PCI PNP
configuration into the function pci_skip_dev(). This function is defined
as weak so that it can be overwritten by a platform specific one if
needed. The check if the device should get printed in the PCI summary upon
bootup (when CONFIG_PCI_SCAN_SHOW is defined) is moved to the function
pci_print_dev() which is also defined as weak too.

Signed-off-by: Stefan Roese <sr@denx.de>

ppc4xx: Fix printf format warnings now visible with the updated format check

This patch fixes ppc4xx related printf format warning. Those warnings are
now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
[Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
really helpful.

Signed-off-by: Stefan Roese <sr@denx.de>

ppc4xx: Enable support for > 2GB SDRAM on AMCC Katmai

Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
To support such configurations, we "only" map the first 2GB via the TLB's. We
need some free virtual address space for the remaining peripherals like, SoC
devices, FLASH etc.

Note that ECC is currently not supported on configurations with more than 2GB
SDRAM. This is because we only map the first 2GB on such systems, and therefore
the ECC parity byte of the remaining area can't be written.

Signed-off-by: Stefan Roese <sr@denx.de>

ppc4xx: Remove implementation of testdram() from Korat board support

Signed-off-by: Larry Johnson <lrj@acm.org>
Signed-off-by: Stefan Roese <sr@denx.de>

ppc4xx: Update and add FDT to Korat board support

Signed-off-by: Larry Johnson <lrj@acm.org>
Signed-off-by: Stefan Roese <sr@denx.de>

Merge branch 'master' of /home/stefan/git/u-boot/u-boot

Minor coding style cleanup; update CHANGELOG

Signed-off-by: Wolfgang Denk <wd@denx.de>

Merge branch 'master' of git://denx.de/git/u-boot-nand-flash

e1000: add support for 82545GM 64bit PCI-X copper variant

This PCI-X e1000 variant works by just adding in the correct
PCI IDs in the appropriate places.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

SPARC: Build error fix

(introduced by commit 391fd93ab23e15ab3dd58a54f5b609024009c378)

This patch makes SPARC targets build again. It is caused by
phys_addr_t and phys_size_t being defined in the wrong header
file. include/lmb.h need those typedefs to build.

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>

Many spelling fixes in README.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>

Minor spelling fix in comment.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>

Round the serial port clock divisor value returned by calc_divisor()

Round the serial port clock divisor value returned by
calc_divisor().

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Signed-off-by: John Roberts <john.roberts@pwav.com>

NAND: ifdef-protect most of nand.h when using legacy NAND.

Some macros such as NAND_CTL_SETALE conflict between current and legacy
NAND, being defined by the subsystem in the former case and the board
config file in the latter.

Signed-off-by: Scott Wood <scottwood@freescale.com>

ARM: Fix for wrong patch version applied for Lyrtech SFF-SDR board (ARM926EJS)

ARM: Fix for incorrect version of patch applied when
adding support for the Lyrtech SFF-SDR board.

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Signed-off-by: Philip Balister, OpenSDR <philip@opensdr.com>

Remove useless print message at apollon

Remove useless print message at apollon

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Fix LMB type issues

The LMB code now uses phys_addr_t and phys_size_t.  Also, there were a couple
of casting problems in the bootm code that called the LMB functions.

Signed-off-by: Andy Fleming <afleming@freescale.com>

Fix compiler warnings

gcc-4.3.x generates the following:

bootm.c: In function 'do_bootm_linux':
bootm.c:208: warning: cast from pointer to integer of different size
bootm.c:215: warning: cast from pointer to integer of different size

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Remove code duplication for setting the default environment

common/env_common.c (default_env): new function that resets the environment to
    the default value
common/env_common.c (env_relocate): use default_env instead of own copy
common/env_nand.c (env_relocate_spec): use default_env instead of own copy
include/environment.h: added default_env prototype

Signed-off-by: Werner Almesberger <werner@openmoko.org>
Signed-off-by: Harald Welte <laforge@openmoko.org>

NAND: Fix warning due to missing env_ptr casts to u_char * in env_nand.c.

The writeenv() and readenv() calls introduced by the recently added bad block
management for environment variables were missing casts therefore producing
compile time warnings.
While at it fixing some typo in a comment and indentation.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

NAND: Rename DEBUG to MTDDEBUG to avoid namespace pollution.

This is particularly problematic now that non-NAND-specific code is
including <nand.h>, and thus all debugging code is being compiled
regardless of whether it was requested, as reported by Scott McNutt
<smcnutt@psyent.com>.

Signed-off-by: Scott Wood <scottwood@freescale.com>

mmc: Move atmel_mci driver into drivers/mmc

This makes it easier to use the driver on other platforms.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

avr32: Use CONFIG_ATMEL_MCI to select the atmel_mci driver

After we move the atmel_mci driver into drivers/mmc, we can't select
it with CONFIG_MMC anymore. Introduce a new symbol specifically for
this driver so that there's no ambiguity.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Create drivers/mmc subdirectory

In order to consolidate more of the various MMC drivers around the
tree, we must first have a common place to put them.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Change env_get_char from a global function ptr to a function

This avoids an early global data reference.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>

Some copy-n-paste fixes in printf usage

Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>

FDT memory and pci node fixes for MPC8260ADS

Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>

Fix printf errors.

The compiler will help find mismatches between printf formats and
arguments if you let it.  This patch adds the necessary attributes to
declarations in include/common.h, then begins to correct the resulting
compiler warnings.  Some of these were bugs, e.g., "$d" instead of
"%d" and incorrect arguments.  Others were just annoying, like
int-long mismatches on a system where both are 32 bits.  It's worth
fixing the annoying errors to catch the real ones.

Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>

Merge branch 'master' of git://denx.de/git/u-boot-mips

Merge branch 'master' of git://denx.de/git/u-boot-cfi-flash

Merge branch 'master' of git://denx.de/git/u-boot-net

Merge branch 'master' of git://denx.de/git/u-boot-sh

Allow print_size to print in GB

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

mips: When booting Linux images, add 'ethaddr' and 'eth1addr' to the environment

Add 'ethaddr' and 'eth1addr' to the Linux kernel environment if
they are set in the U-Boot environment.

Signed-off-by: Jason McMullan <mcmullan@netapp.com>
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

jedec_flash: Fix AM29DL800BB device ID

As pointed out by Jerry Hicks, this patch corrects the device ID of
the Spansion AM29DL800BB NOR device. Verified against latest Spansion
datasheet (rev C4 from Dezember 2006).

Signed-off-by: Stefan Roese <sr@denx.de>

sh: Fix compile error sh7763rdp board

Disable SH ether driver.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Fix SH-boards compile error

By Cleanup out-or-tree building for some boards (.depend)
(commit:c8a3b109f07f02342d097b30908965f7261d9f15)
because filse ware changed, some SH-boards have compile error.
I revised this problem.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Feed the watchdog in u-boot for 8610 board.

The watchdog on 8610 board is enabled by setting sw[6]
to on. Once enabled, the watchdog can not be disabled
by software. So feed the dog in u-boot is necessary for
normal operation.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>

Merge branch 'master' of /home/stefan/git/u-boot/u-boot

Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.

Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.

Remove duplicate code in a if/else block in
cpu/arm926ejs/davinci/lxt972.c.
Fixed style issues.

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

Remove duplicate definitions in include/lxt971a.h.

Remove duplicate definitions in include/lxt971a.h.

Remove duplicate registers and bits definitions in
include/lxt971a.h for standard MII registers, and
use values in include/miiphy.h instead.

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

net: sh: Renesas SH7763 Ethernet device support

Renesas SH7763 has 2 channel Ethernet device.
This is 10/100/1000 Base support.
But this patch check 10/100 Base only.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

sh: Update Renesas R2DPlus board

New NOR Flash board support and remove old type flash board config.
And Remove network setting from config file.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Update Renesas R7780MP board

New NOR Flash board support and remove network setting from config file.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Update Renesas Migo-R board

Remove network setting from config file.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Update Hitachi MS7722SE board

Remove network setting from config file.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Cleanup source code of SH7763RDP

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Cleanup source code of R2DPlus

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Cleanup source code of R7780MP

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Cleanup source code of MS7722SE

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Cleanup source code of MS7720SE

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Merge branch 'master' of /home/wd/git/u-boot/custodians

Merge branch 'master' of git://denx.de/git/u-boot-at91

SH: fix out of tree building

Signed-off-by: Wolfgang Denk <wd@denx.de>

Merge branch 'master' of /home/wd/git/u-boot/custodians

Merge branch 'master' of git://denx.de/git/u-boot-avr32

Merge branch 'master' of /home/wd/git/u-boot/custodians

Merge branch 'master' of git://denx.de/git/u-boot-mpc83xx

net: smc911x: Fix typo

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>

update mvBL-M7 board config

update mvBL-M7 config file to use UBOOT_VERSION and define
CONFIG_HIGH_BATS.

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>

net: fix compile problem in smc911x driver.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Ben Warren <biggerbadderben@gmail.com>

ppc4xx: Rename CONFIG_XILINX_ML300 to CONFIG_XILINX_405

This change helps with better handling with others
Xilinx based platform.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Stefan Roese <sr@denx.de>

net: ne2000: Move dev_addr variable from grobal to local.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

net: ne2000: Fix compile error of NE2000

If enable DEBUG, can not compile ne2000 driver.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

Add mechanisms for CPU and board-specific Ethernet initialization

This patch is the first step in cleaning up net/eth.c, by moving Ethernet
initialization to CPU or board-specific code.  Initial implementation is
only on the Freescale TSEC controller, but others will be added soon.

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

include/sha256.h: fix file permissions.

Signed-off-by: Wolfgang Denk <wd@denx.de>

Merge branch 'master' of ssh+git://mercury.denx.de/home/wd/git/u-boot/master

Conflicts:

board/amirix/ap1000/serial.c
board/exbitgen/exbitgen.c
board/exbitgen/flash.c
board/ml2/serial.c
board/xilinx/ml300/serial.c

Signed-off-by: Wolfgang Denk <wd@denx.de>

[AT91SAM9] Fix NAND FLASH timings

Fix NAND FLASH timings for at91sam9x evaluation kits.

New timings are based on application note
"NAND Flash Support on AT91SAM9 Microcontrollers" available at
http://atmel.com/dyn/resources/prod_documents/doc6255.pdf

Signed-off-by: Patrice Vilchez <patice.vilchez@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Stelian Pop <stelian@popies.net>

Fix boot from NOR due to incorrect reset delay.

AT91 RSTC registers are battery-backuped, so their values
are not reset across power cycles. One of those registers,
the AT91_RSTC_MR register, is being modified by U-Boot, in
the ethernet initialisation routine, to generate a 500ms
user reset.

Unfortunately, this value is not being restored afterwards,
causing subsequent resets to also last for 500ms.

This long reset sequence causes problems (at least) in the
boot sequence from NOR: by the time the CPU tries to load
a program from the NOR flash, the latter is still in reset
and not yet available.

Additionaly, this patch fixes a bug in the original code which
caused the reset delay to last for 2s instead of 500ms.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Update CHANGELOG

Signed-off-by: Wolfgang Denk <wd@denx.de>

CCM/SCM boards: fix out of tree building

Signed-off-by: Wolfgang Denk <wd@denx.de>

SCM board: fix build errors.

Signed-off-by: Wolfgang Denk <wd@denx.de>

IAD210 board: fix ``"ALIGN" redefined'' warning.

Signed-off-by: Wolfgang Denk <wd@denx.de>