Arnd Bergmann [Fri, 28 Sep 2018 11:02:04 +0000 (13:02 +0200)]
Merge tag 'pxa-dt-4.20' of https://github.com/rjarzmik/linux into next/dt
This device-tree pxa update brings :
- a couple of changes for future pxa2xx platforms
- 2 fixes in RTC and I2C domain
* tag 'pxa-dt-4.20' of https://github.com/rjarzmik/linux:
ARM: dts: pxa: add pincontrol helpers
ARM: dts: pxa: fix power i2c base address
ARM: dts: pxa: fix the rtc controller
ARM: dts: pxa: change serial node names
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 28 Sep 2018 10:48:09 +0000 (12:48 +0200)]
Merge tag 'amlogic-dt64-2' of git://git./linux/kernel/git/khilman/linux-amlogic into next/dt
Amlogic ARM64 DT updates for v4.20, round 2
- new SoC support: basic support for G12A family
- new board: Amlogic U200 board, using G12A SoC
- fix SPI bus warnings from new dtc updates
* tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson-g12a: add initial g12a s905d2 SoC DT support
dt-bindings: arm: amlogic: Add Meson G12A binding
arm64: dts: meson: Fix erroneous SPI bus warnings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 28 Sep 2018 10:45:56 +0000 (12:45 +0200)]
Merge tag 'amlogic-dt' of git://git./linux/kernel/git/khilman/linux-amlogic into next/dt
ARM: dts: Amlogic updates for v4.20
- fix clock controller register sizes
- new board: Endless Mini (EC-100) by Endless Mobile
- add voltage regulators
* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8b: odroidc1: add stdout-path property
ARM: dts: meson8b: odroidc1: enable the SAR ADC
ARM: dts: meson8b: odroidc1: add the fixed voltage regulators
ARM: dts: meson8b: odroidc1: add the CPU voltage regulator
ARM: dts: meson8b: Add support for the Endless Mini (EC-100)
ARM: dts: meson8b: add the RMII pins
ARM: dts: meson8b: add the I2C_A, PWM_C and UART_B pins
dt-bindings: arm: amlogic: Add the Endless Mobile Endless Mini (EC-100)
dt-bindings: add vendor prefix for "Endless Mobile, Inc."
ARM: dts: meson8b: fix the clock controller register size
ARM: dts: meson8: fix the clock controller register size
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 28 Sep 2018 10:36:27 +0000 (12:36 +0200)]
Merge tag 'berlin64-dt-for-v4.20' of git://git./linux/kernel/git/jszhang/linux-berlin into next/dt
Berlin64 DT changes for v4.20
* tag 'berlin64-dt-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin:
arm64: dts: synaptics: add dtsi file for Synaptics AS370 SoC
dt-bindings: arm: syna: add support for the AS370 SoC
dt-bindings: arm: move berlin binding documentation to syna.txt
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Fri, 28 Sep 2018 10:35:20 +0000 (12:35 +0200)]
Merge tag 'realview-dts-v4.20' of git://git./linux/kernel/git/linusw/linux-integrator into next/dt
Realview DTS update for v4.20:
- One patch from Rob fixing SPI node names
* tag 'realview-dts-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: dts: realview: Fix SPI controller node names
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rob Herring [Thu, 13 Sep 2018 18:12:33 +0000 (13:12 -0500)]
ARM: dts: lpc32xx: Fix SPI controller node names
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rob Herring [Thu, 13 Sep 2018 18:12:44 +0000 (13:12 -0500)]
arm64: dts: lg: Fix SPI controller node names
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Cc: Chanho Min <chanho.min@lge.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rob Herring [Thu, 13 Sep 2018 18:12:40 +0000 (13:12 -0500)]
arm64: dts: amd: Fix SPI bus warnings
dtc has new checks for SPI buses. Fix the warnings in node names.
arch/arm64/boot/dts/amd/amd-overdrive.dtb: Warning (spi_bus_bridge): /smb/ssp@
e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dtb: Warning (spi_bus_bridge): /smb/ssp@
e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dtb: Warning (spi_bus_bridge): /smb/ssp@
e1030000: node name for SPI buses should be 'spi'
Cc: Brijesh Singh <brijeshkumar.singh@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rob Herring [Thu, 13 Sep 2018 18:12:26 +0000 (13:12 -0500)]
ARM: dts: realview: Fix SPI controller node names
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Jisheng Zhang [Fri, 13 Jul 2018 09:05:04 +0000 (17:05 +0800)]
arm64: dts: synaptics: add dtsi file for Synaptics AS370 SoC
Add initial dtsi file to support Synaptics AS370 SoC with quad
Cortex-A53 CPUs.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Jisheng Zhang [Fri, 13 Jul 2018 09:00:33 +0000 (17:00 +0800)]
dt-bindings: arm: syna: add support for the AS370 SoC
The AS370 SoC is a new derivative of the berlin family. However, the
SoC isn't named as berlin*.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Jisheng Zhang [Fri, 13 Jul 2018 08:52:16 +0000 (16:52 +0800)]
dt-bindings: arm: move berlin binding documentation to syna.txt
Move berlin binding documentation as part of transition from Marvell
berlin to Synaptics SoC.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: Rob Herring <robh@kernel.org>
Arnd Bergmann [Wed, 26 Sep 2018 15:07:57 +0000 (17:07 +0200)]
Merge tag 'zynq-dt-for-v4.20' of https://github.com/Xilinx/linux-xlnx into next/dt
ARM: dts: zynq: DT changes for v4.20
- Fix DTS spi/i2c warnings for zc702/zc770 boards
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Jianxin Pan [Fri, 21 Sep 2018 08:34:41 +0000 (16:34 +0800)]
arm64: dts: meson-g12a: add initial g12a s905d2 SoC DT support
Try to add basic DT support for the Amlogic's Meson-G12A S905D2 SoC,
which describe components as follows: Reserve Memory, CPU, GIC, IRQ,
Timer, UART. It's capable of booting up into the serial console.
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Jianxin Pan [Fri, 21 Sep 2018 08:34:40 +0000 (16:34 +0800)]
dt-bindings: arm: amlogic: Add Meson G12A binding
Introduce new bindings for the Meson G12A SoC
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Martin Blumenstingl [Thu, 13 Sep 2018 20:29:19 +0000 (22:29 +0200)]
ARM: dts: meson8b: odroidc1: add stdout-path property
To use the "earlycon" kernel command line parameter (without arguments)
we need a stdout-path property under the /chosen node. Add this to make
it easier to spot errors early in the boot process when looking for
them.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Martin Blumenstingl [Thu, 13 Sep 2018 20:29:18 +0000 (22:29 +0200)]
ARM: dts: meson8b: odroidc1: enable the SAR ADC
Odroid-C1 exposes ADC channels 0 and 1 on the GPIO headers. NOTE: Due
to the SoC design these are limited to 1.8V (instead of 3.3V like all
other pins).
Enable the SAR ADC to enable voltage measurements on these pins.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Martin Blumenstingl [Thu, 13 Sep 2018 20:29:17 +0000 (22:29 +0200)]
ARM: dts: meson8b: odroidc1: add the fixed voltage regulators
There are multiple fixed regulators on the Odroid-C1 board. Add them so
they can be used when we add the devices that need them (SAR ADC needs
the 1.8V IOREF, RTC needs VDD_RTC).
These are:
- P5V0 is the main 5V power input
- VCC3V3 / VDDIO_AO3V3 / VDD3V3: fixed regulator with 3.3V output which
is supplied by P5V0
- IOREF_1V8 / VCC1V8 / VDD1V8: fixed regulator with 1.8V output which is
supplied by P5V0
- VDD_RTC: fixed voltage regulator with 0.9V output which is supplied by
VDDIO_AO3V3
- DDR_VDDC / DDR3_1V5: fixed voltage regulator with 1.5V output which is
supplied by P5V0
- the existing TF_IO and RFLASH_VDD_EN regulators are supplied by
VDDIO_AO3V3
- the existing VCCK regulator is supplied by P5V0
This does not add the missing VDDEE regulator (controlled by PWM_D)
because it's not clear yet how to configure the voltage of that
regulator.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Martin Blumenstingl [Thu, 13 Sep 2018 20:29:16 +0000 (22:29 +0200)]
ARM: dts: meson8b: odroidc1: add the CPU voltage regulator
The CPU voltage regulator is a "Monolithic Power Systems MP2161"
(according to the Odroid-C1+'s schematics). It is driven by PWM_C on
GPIODV_9.
Hardkernel's 3.10 kernel (based on the Amlogic GPL kernel sources)
defines a PWM voltage table with the following values:
- 0.86 volts = PWM register value 0x10f001b
- (more values in 0.1 volt increments)
- 1.14 volts = PWM register value 0x000012a
When using the XTAL (24MHz) as input this translates into a PWM period
of 12218ns with 0.86V using a duty cycle of 91% and 1.14V using a duty
cycle of 0%.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Martin Blumenstingl [Sat, 22 Sep 2018 15:10:03 +0000 (17:10 +0200)]
ARM: dts: meson8b: Add support for the Endless Mini (EC-100)
The Endless Mini (EC-100) is a grapefruit-sized computer based on the
Amlogic Meson8b (S805) SoC which comes in two variants.
Both variants have in common:
- Amlogic Meson8b (S805) SoC
- two USB 2.0 ports on the rear, one one the front (connected to the SoC
through an internal hub)
- 3.5mm Stereo out and MIC combo port
- HDMI and CVBS output
- 5V power supply (rated at 3A / 15W)
- an internal embedded micro-controller (called "EC") which implements a
"breathing" effect for the LED and allows shutting down (powering off)
the whole device
- 10/100 Mbit/s Ethernet using an IC Plus IP101A/G PHY (note: the website
incorrectly lists a Gigabit Ethernet port)
- the CPU voltage is regulated using a PWM regulator. The GPL sources of
the EC-100 are using a PWM value of 0x1c0000 for 0.86V and a PWM value
of 0x00001c for 1.14V. When using the XTAL (24MHz) as input this
translates into a PWM period of 1148ns with 0.86V using a duty cycle of
100% and 1.14V using a duty cycle of 0%.
The main differences are:
- the main indicator for the variant is the RAM size: the "cheaper"
variant has 1 GB of RAM, while the more expensive one comes with 2GB
- the storage size differs: 24 GB vs 32 GB
- the "1 GB RAM" variant has Ethernet connectivity only, while the "2 GB"
variant has a Realtek RTL8723BS SDIO chip which adds 802.11b/g/n wifi
and Bluetooth 4.0 support
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Martin Blumenstingl [Sat, 22 Sep 2018 15:10:02 +0000 (17:10 +0200)]
ARM: dts: meson8b: add the RMII pins
Some boards use an RMII Ethernet PHY which requires fewer pins than the
RGMII PHYs. Add a separate eth_rmii_pins node which does not include the
pins which are only required for RGMII (but not for RMII) PHYs.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Martin Blumenstingl [Sat, 22 Sep 2018 15:10:01 +0000 (17:10 +0200)]
ARM: dts: meson8b: add the I2C_A, PWM_C and UART_B pins
These are used for example on the Endless Mini (EC-100):
- I2C_A is connected to the Realtek RT5640 audio codec
- PWM_C (GPIODV_9) is connected to a PWM regulator which is used for
VCCK (CPU voltage supply)
- UART_B is connected to the Bluetooth module (of the RTL8723BS SDIO
wifi and Bluetooth combo chip)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Martin Blumenstingl [Sat, 22 Sep 2018 15:10:00 +0000 (17:10 +0200)]
dt-bindings: arm: amlogic: Add the Endless Mobile Endless Mini (EC-100)
Add bindings documentation for the Endless Mini (EC-100) from Endless
Mobile.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Martin Blumenstingl [Sat, 22 Sep 2018 15:09:59 +0000 (17:09 +0200)]
dt-bindings: add vendor prefix for "Endless Mobile, Inc."
Endless Mobile, Inc. started selling (small) computers in 2015.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Olof Johansson [Tue, 25 Sep 2018 20:49:08 +0000 (13:49 -0700)]
Merge tag 'samsung-dt-4.20-2' of https://git./linux/kernel/git/krzk/linux into next/dt
Samsung DTS ARM changes for v4.20
1. Bring up DSI and HDMI on Exynos5250 Arndale.
2. Use the new way of setting external wakeup interrupts on S5Pv210.
3. Use proper cpufreq suspend OPP to fix suspend/wakeup from RAM on Snow
Chromebook (Exynos5250).
4. Fully describe regualtors on Odroid XU3-family boards.
5. Fix sound in Snow-rev5 Chromebook.
6. Fix regulators configuration on Peach Pi/Pit Chromebooks (Exynos5420)
which should be always on.
7. Fix pull control on PMIC interrupt lines on multiple boards which
essentially fixes waking up by RTC.
8. Add PMIC interrupts on Exynos4210 UniversalC210 board.
9. Add external SD card support for Trats board (Exynos4210).
10. Correct audio subsystem parent clock on Peach Chromebooks.
11. Minor cleanups.
* tag 'samsung-dt-4.20-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Correct audio subsystem parent clock on Peach Chromebooks
ARM: dts: exynos: Add external SD card support for Trats board
ARM: dts: exynos: Disable pull control for PMIC IRQ line on Artik5 board
ARM: dts: exynos: Disable pull control for S5M8767 PMIC
ARM: dts: exynos: Remove double SD card detect pin inversion
ARM: dts: exynos: Add missing PMIC interrupts on UniversalC210 board
ARM: dts: exynos: Disable pull control for MAX8997 interrupts on Origen
ARM: dts: exynos: Fix regulators configuration on Peach Pi/Pit Chromebooks
ARM: dts: exynos: Fix sound in Snow-rev5 Chromebook
ARM: dts: exynos: Add LDO28 regulator on Exynos5422 Odroid boards
ARM: dts: exynos: Disable unused PMIC regulators on Exynos5422 Odroid boards
ARM: dts: exynos: Add unused PMIC regulators on Exynos5422 Odroid boards
ARM: dts: exynos: Add missing used PMIC regulators on Exynos5422 Odroid boards
ARM: dts: exynos: Mark 1 GHz CPU OPP as suspend OPP on Exynos5250
ARM: dts: exynos: Convert exynos5250.dtsi to opp-v2 bindings
ARM: dts: s5pv210: Switch to S5Pv210 specific pinctrl wakeup compatible
ARM: dts: exynos: Fix HDMI-HPD line handling on Arndale
ARM: dts: exynos: Use i2c-gpio for HDMI-DDC on Arndale
ARM: dts: exynos: Add DSI and panel nodes on Arndale
ARM: dts: exynos: Add DSI node on Exynos5250
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 25 Sep 2018 20:48:25 +0000 (13:48 -0700)]
Merge tag 'socfpga_updates_for_v4.20_part2' of git://git./linux/kernel/git/dinguyen/linux into next/dt
SoCFPGA DTS updates for v4.20, part 2
- Fix I2C bus unit-address warning with new DTC checks
- Add reset properties for timers
* tag 'socfpga_updates_for_v4.20_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: add timer resets for SoCFPGA platform
ARM: dts: socfpga: Fix I2C bus unit-address error
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 25 Sep 2018 20:40:44 +0000 (13:40 -0700)]
Merge tag 'sti-dt-for-v4.20-round1' of git://git./linux/kernel/git/pchotard/sti into next/dt
STi DT update:
_ Change syntax of multiple DAI links
* tag 'sti-dt-for-v4.20-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
ARM: dts: stih410: change syntax of multiple DAI
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 25 Sep 2018 20:38:31 +0000 (13:38 -0700)]
Merge tag 'at91-4.20-dt' of git://git./linux/kernel/git/at91/linux into next/dt
AT91 DT for 4.20
- warning fiwes from Rob
- many updates for the axentia boards
- ADC, I2S and touch screen support for sama5d2
* tag 'at91-4.20-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
arm: dts: sama5d2: Update coresight bindings for hardware ports
ARM: dts: at91: sama5d27_som1_ek: add adc regulators
ARM: dts: atmel: Fix I2C and SPI bus warnings
ARM: dts: at91: sama5d4: add labels to soc dtsi for derivative boards
ARM: dts: at91: tse850: drop three indentation levels
ARM: dts: at91: nattis: drop three indentation levels
ARM: dts: at91: nattis: describe the lvds panel
ARM: dts: at91: nattis: move pinctrls for the lvds chip to the lvds node
ARM: dts: at91: nattis: state the actual lvds-encoder chip
ARM: dts: at91: nattis: make the SD-card slot work
ARM: dts: at91: nattis: set the PRLUD and HIPOW signals low
ARM: dts: at91/trivial: remove old NAND bindings leftover in sama5d2
ARM: dts: at91/trivial: Fix USART1 definition for at91sam9g45
ARM: dts: at91: sama5d2 Xplained: add pin muxing for I2S
ARM: dts: at91: sama5d2: add nodes for I2S controllers
ARM: dts: at91: sama5d2: add I2S clock muxing nodes
ARM: dts: at91: sama5d2: Add resistive touch device
ARM: dts: at91: sama5d2: add channel cells for ADC device
Signed-off-by: Olof Johansson <olof@lixom.net>
Liviu Dudau [Mon, 24 Sep 2018 10:22:28 +0000 (11:22 +0100)]
arm64: dts: broadcom: Use the .dtb name in the rule, rather than .dts
Commit
a7eb26392b893 ("arm64: dts: broadcom: Add reference to Compute
Module IO Board V3") adds the bcm2837-rpi-cm3-io3.dts file as a target
in the Makefile, rather than the .dtb name. This will skip the
generation of the .dtb file at compile time and will fail the dtbs_install
target.
Fixes:
a7eb26392b893 ("arm64: dts: broadcom: Add reference to Compute Module IO Board V3")
Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Christophe Priouzeau [Mon, 3 Sep 2018 15:49:25 +0000 (17:49 +0200)]
ARM: dts: stih410: change syntax of multiple DAI
With change of syntax for 'simple-audio-card,dai-link' containers,
devicetrees of stih410 must be updated.
This fixes the following error:
[ 3.839466] asoc-simple-card sound: asoc_simple_card_dai_link_of:
Can't find simple-audio-card,cpu DT node
[ 3.849150] asoc-simple-card sound: parse error -22
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Marek Szyprowski [Fri, 14 Sep 2018 06:55:03 +0000 (08:55 +0200)]
ARM: dts: exynos: Correct audio subsystem parent clock on Peach Chromebooks
The proper parent clock for audio subsystem for Exynos5420 and Exynos5800
SoCs is CLK_MAU_EPLL. This fixes following warning:
clk: failed to reparent mout_audss to fout_epll: -22
Fixes:
ed7d1307077e: ARM: dts: exynos: Enable HDMI audio support on Peach Pit
Fixes:
bae0f445c1e7: ARM: dts: exynos: Enable HDMI audio support on Peach Pi
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Olof Johansson [Sun, 23 Sep 2018 13:48:02 +0000 (06:48 -0700)]
Merge tag 'samsung-soc-4.20' of https://git./linux/kernel/git/krzk/linux into next/dt
Samsung mach/soc changes for v4.20
1. Fix imprecise abort during Odroid XU3-family suspend to RAM (but it
is not end of work needed for suspend).
2. Cleanup and fix of SD card write protect on MINI2440.
* tag 'samsung-soc-4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s3c24xx: Restore proper usage of pr_info/pr_cont
ARM: s3c24xx: Correct SD card write protect detection on Mini2440
ARM: s3c24xx: Consistently use tab for indenting member assignments
ARM: s3c24xx: formatting cleanup in mach-mini2440.c
ARM: s3c24xx: Remove empty gta02_pmu children probe
ARM: exynos: Fix imprecise abort during Exynos5422 suspend to RAM
ARM: exynos: Store Exynos5420 register state in one variable
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 23 Sep 2018 13:38:08 +0000 (06:38 -0700)]
Merge tag 'hisi-arm32-dt-for-4.20' of git://github.com/hisilicon/linux-hisi into next/dt
ARM: DT: Hisilicon ARM32 SoCs updates for 4.20
- Switch to updated coresight bindings for hip04 SoC
* tag 'hisi-arm32-dt-for-4.20' of git://github.com/hisilicon/linux-hisi:
arm: dts: hip04: Update coresight bindings for hardware ports
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 23 Sep 2018 13:37:47 +0000 (06:37 -0700)]
Merge tag 'hisi-arm64-dt-for-4.20' of git://github.com/hisilicon/linux-hisi into next/dt
ARM64: DT: Hisilicon SoC DT updates for 4.20
- Add missing clocks for Hi6220
- Switch to updated coresight bindings for Hi6220
- Add DT bindings and support for Hi3670 SoC and HiKey970 board
* tag 'hisi-arm64-dt-for-4.20' of git://github.com/hisilicon/linux-hisi:
arm64: dts: Add devicetree support for HiKey970 board
dt-bindings: arm: hisilicon: Add binding for HiKey970 board
arm64: dts: Add devicetree for Hisilicon Hi3670 SoC
dt-bindings: arm: hisilicon: Add binding for Hi3670 SoC
arm64: dts: hi6220: Update coresight bindings for hardware ports
arm64: dts: hisilicon: Add missing clocks property for CPUs
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 23 Sep 2018 13:36:16 +0000 (06:36 -0700)]
Merge tag 'stm32-dt-for-v4.20-1' of git://git./linux/kernel/git/atorgue/stm32 into next/dt
STM32 DT updates for v4.20, round 1
Highlights:
----------
- MCU platforms update:
- Add missing clock node's lobel on stm32f429
- Remove cd-inverted property for sdio nodes for all mcus
- Fix stm32h7 rtc binding
- MPU STM32MP157 platform update:
- Enable display: CEC and DSI
- Fix SPI node name to match with the new DTC
* tag 'stm32-dt-for-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: Fix SPI controller node names
ARM: dts: stm32: enable display on stm32mp157c-ev1 board
ARM: dts: stm32: update rtc st,syscfg property on stm32h743
ARM: dts: stm32: Remove cd-inverted property for stm32f746-disco
ARM: dts: stm32: Remove cd-inverted property for stm32f769-disco
ARM: dts: stm32: Remove cd-inverted property for stm32f469-disco
ARM: dts: stm32: Remove cd-inverted property for stm32429i-eval
ARM: dts: stm32: Add clk-lse node's label on stm32f429
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 23 Sep 2018 13:33:56 +0000 (06:33 -0700)]
Merge tag 'ux500-dts-arm-soc' of git://git./linux/kernel/git/linusw/linux-stericsson into next/dt
Ux500 DTS changes for the v4.20 kernel cycle.
Assorted housekeeping DTS patches.
* tag 'ux500-dts-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: dts: ux500: Mark PRCMU as syscon compatible
arm: dts: ste: Update coresight bindings for hardware port
ARM: dts: ste: Fix SPI controller node names
ARM: dts: ux500: Get rid of DTC warnings
ARM: dts: ux500: Fix LCDA clock line muxing
dt-bindings: arm: scu: Correct example SCU unit addresses
ARM: dts: ux500: Correct SCU unit address
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 23 Sep 2018 13:32:33 +0000 (06:32 -0700)]
Merge tag 'aspeed-4.20-devicetree' of git://git./linux/kernel/git/joel/aspeed into next/dt
ASPEED device tree updates for 4.20
- Two new ast2500-based machines:
* Facebook TiogaPass (x86 server)
* HXT StarDragon 4800 Reference Evaluation Platform 2 (arm64 server)
- Updates for the Quanta q71l system
- i2c device tree cleanups
* tag 'aspeed-4.20-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: aspeed: Adding Facebook TiogaPass BMC
ARM: dts: aspeed: Add HXT StarDragon 4800 REP2 BMC
ARM: dts: aspeed: quanta-q71l: Enable adc & ibt nodes
ARM: dts: aspeed: quanta-q71l: Add four PSUs
ARM: dts: aspeed: quanta-q71l: add aliases for i2c
ARM: dts: aspeed: Fix I2C bus warnings
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 23 Sep 2018 13:31:04 +0000 (06:31 -0700)]
Merge tag 'am654-for-v4.20' of git://git./linux/kernel/git/kristo/linux into next/dt
TI AM654 support for v4.20 merge window.
This branch adds changes for the Texas Instruments AM654 SoC. Included
changes are:
- Add uart nodes
- Change address cells and size-cells of interconnect tfrom 1 to 2
- Add secure proxy instance for main domain
- Add DMSC support
* tag 'am654-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
arm64: dts: ti: k3-am6: Add Device Management Security Controller support
arm64: dts: ti: am654: Add secure proxy instance for main domain
arm64: dts: ti: am654: Add uart nodes
arm64: dts: ti: k3-am65: Change #address-cells and #size-cells of interconnect to 2
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 23 Sep 2018 13:28:51 +0000 (06:28 -0700)]
Merge tag 'juno-updates-4.20' of git://git./linux/kernel/git/sudeep.holla/linux into next/dt
ARMv8 Juno/Vexpress updates for v4.20
1. Enablement of scatter gather mode for CoreSight TMC-ETR routing
2. Usage of updated coresight graph bindings that eliminates loads of
dtc warnings
* tag 'juno-updates-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Enable coresight tmc scatter gather in ETR
arm64: dts: juno: Update entries to match latest coresight bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 23 Sep 2018 13:28:19 +0000 (06:28 -0700)]
Merge tag 'arm-soc/for-4.20/devicetree-arm64' of https://github.com/Broadcom/stblinux into next/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 4.20, please pull the following:
- Stefan provides a reference to the Compute Module IO Board V3 such
that we can reference the arm counterpart and still build it for arm64
- Rob fixes I2C and SPI bus warnings which are going to show up with his
update to DTC scheduled for 4.20
* tag 'arm-soc/for-4.20/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Fix I2C and SPI bus warnings
arm64: dts: broadcom: Add reference to Compute Module IO Board V3
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 23 Sep 2018 13:24:28 +0000 (06:24 -0700)]
Merge tag 'arm-soc/for-4.20/devicetree' of https://github.com/Broadcom/stblinux into next/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 4.20, please pull the following:
- Rafal updates the Broadcom BCM5301x (Northstar) DTS files to use the
new style partition parser and removes the unsupported/undocumented
linux,part-probe properties that were previously introduced
- Stefan adds supports for the Raspberry Pi Compute Module 3/3Lite, he
also updates the Raspberry Pi 3B+ USB Ethernet adapter to have proper
LED configuration
- Rob fixes a bunch of SPI bus warnings in the Northstar Plus and
Hurricane 2 DTS files
- Florian documents the Broadcom roboswitch Switch Register Access Block
(SRAB) interrupts, adds the switch interrupts to the Northstar Plus
DTS include file and finally updates the BCM958625HR reference board to
have the proper SFP module definition
* tag 'arm-soc/for-4.20/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm: Fix SPI bus warnings
ARM: dts: NSP: Wire up switch interrupts
dt-bindings: net: dsa: Document B53 SRAB interrupts and registers
ARM: dts: NSP: Enable SFP on bcm958625hr
ARM: dts: bcm283x-rpi-lan7515: Enable Ethernet LEDs
ARM: dts: BCM5301X: Specify flash partitions
ARM: dts: add Raspberry Pi Compute Module 3 and IO board
dt-bindings: bcm: Add Raspberry Pi CM3 and CM3L
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 23 Sep 2018 13:21:10 +0000 (06:21 -0700)]
Merge tag 'amlogic-dt64' of https://git./linux/kernel/git/khilman/linux-amlogic into next/dt
Amlogic ARM64 DT updates for v4.20
- AXG: cleanup/reorder nodes
- AXG: add audio PDM support for s400 board
- GX: increase CMA memory size
- GX: new canvas driver
* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson: Switch simple-mfd and syscon order
arm64: dts: meson-axg-s400: Add chosen and memory nodes
arm64: dts: meson-axg: use the proper compatible for ethmac
arm64: dts: meson-axg: s400: add pdm to the sound card
arm64: dts: meson-axg: s400: add dmic codec
arm64: dts: meson-axg: add pdm
arm64: dts: meson-gx: add dmcbus and canvas nodes.
arm64: dts: meson: libretech: update board model
arm64: dts: meson-gx: increase default shared CMA pool size
arm64: dts: meson-axg: sort nodes consistently
arm64: dts: meson-axg: s400: add sound card
arm64: dts: meson-axg: s400: enable audio devices
arm64: dts: meson-axg: add audio fifos
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 23 Sep 2018 13:20:06 +0000 (06:20 -0700)]
Merge tag 'v4.20-rockchip-dts64-1' of git://git./linux/kernel/git/mmind/linux-rockchip into next/dt
New soc support for the px30 quad-core Cortex-A35.
New boards are the px30 eval board and roc-rk3399-pc.
The rk3328 got support for the one gpio controlled via the general
register files and the rk3399 finally got its idle-states defined.
And finally fixes and improvements for firefly-rk3399 (wifi),
roc-rk3328-cc (sdmmc-uhs, io-domains), rk3328-rock64 (gpio-regulator
pin fix) and rk3399-sapphire (gpio-regulator pin fix, pmic pin fix
and type-c port supply).
* tag 'v4.20-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add type-c port supply on rk3399-sapphire board
arm64: dts: rockchip: fix vcc_host1_5v pin assign on rk3328-rock64
arm64: dts: rockchip: add WiFi module support for Firefly-RK3399
arm64: dts: rockchip: remove dvs2 pinctrl from pmic on rk3399-sapphire
arm64: dts: rockchip: Fix VCC5V0_HOST_EN on rk3399-sapphire
arm64: dts: rockchip: re-order vcc_sys on rk3399-sapphire
arm64: dts: rockchip: add missing vop properties for px30
arm64: dts: rockchip: Add idle-states to device tree for rk3399
arm64: dts: rockchip: add sdmmc UHS support for roc-rk3328-cc
arm64: dts: rockchip: add GRF GPIO controller to rk3328
arm64: dts: rockchip: add io-domain to roc-rk3328-cc
arm64: dts: rockchip: add PX30 evaluation board devicetree
arm64: dts: rockchip: add core dtsi file for PX30 SoCs
dt-bindings: rockchip: grf: add grf and pmugrf description for px30
arm64: dts: rockchip: add support for ROC-RK3399-PC board
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 23 Sep 2018 13:19:04 +0000 (06:19 -0700)]
Merge tag 'renesas-arm64-dt-for-v4.20' of https://git./linux/kernel/git/horms/renesas into next/dt
Renesas ARM64 Based SoC DT Updates for v4.20
* Correct whitespace around assignments
* R-Car Gen-3 SoCs:
- Enable SDR104 for SD devices
- Include R-Car product name in DTSI files to ease maintenance
* R-Car Gen-3 SoC based boards: Convert to new LVDS DT bindings
* R-Car Gen 3 Salvator-X and Salvator-XS boards:
- Override secondary addresses of ADV748x to avoid address conflicts
* R-Car Gen 3 based Salvator-XS board: Enable SATA
* R-Car M3-N (r8a77965) SoC:
- Add FDP1 device nodes
- Move arm_cc630p and timer nodes to restore sort-order of file
- Correct clock/reset for usb2_phy1
- Correct HS-USB compat string
- Add OPPs table for cpu devices enabling CPUFreq support
- Add CAN device placeholder nodes to facilitate adding
initial device tree for KF daughter board
- Attach SYS-DMAC to the IPMMU
* R-Car M3-N (r8a77965) based ULCB board:
- Initial device tree for board and KF daughter board
* R-Car E3 (r8a77990) SoC:
- Add SYS-DMAC, I2C VIN, CSI-2, MSIOF device nodes
- Add BRG support to SCIF2 which allows an increase in serial clock accuracy
- Use CPG/MSSR and SYSC binding definitions
* R-Car E3 (r8a77990) based Ebisu board: Enable PWM
* R-Car D3 (r8a77995) SoC: Attach the SYS-DMAC to the IPMMU
* R-Car D3 (r8a77995) based Draak board: Sort device nodes
* R-Car V3H (r8a77980) based V3HSK board:
- Move lvds0 node to restore sort-order of file
* R-Car V3H (r8a77980) SoC:
- Add RWDT, CSI2 and VIN, Cortex-A53 PMU nodes
- Move IPMMU and CAN clock nodes to restore sort-order of file
* R-Car V3M (r8a77970) SoC:
- Add MMC nodes
- Move CAN clock node to restore sort-order of file
* R-Car V3M (r8a77970) based V3MSK board: Add eMMC support
* R-Car V3H (r8a77980) based Condor board: Add PCIe, DU, LVDS and HDMI support
* RZ/G2M (r8a774a1) SoC:
- Initial device tree
- Add SYS-DMAC, SCIF, HSCIF, INTC-EX, EtherAVB, RWDT, pinctl, GPIO,
SDHI, I2C, IIC-DVFS, thermal, IPMMU, MSIOF, Cortex-A53 CPU core,
PWM, Audio, FCPF, FCPV, USB2.0, USB-DMAC, HSUSB and USB3.0 device nodes
* tag 'renesas-arm64-dt-for-v4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (58 commits)
arm64: dts: r8a77965: add FDP1 device nodes
arm64: dts: renesas: draak: Sort device nodes
arm64: dts: renesas: enable SDR104 on R-Car Gen3
arm64: dts: renesas: r8a77990: Add SYS-DMAC device nodes
arm64: dts: renesas: r8a77990: Add I2C device nodes
arm64: dts: renesas: r8a77990: Add VIN and CSI-2 device nodes
arm64: dts: renesas: r8a77990: Add all MSIOF nodes
arm64: dts: renesas: r8a7795: Move arm_cc630p node
arm64: dts: renesas: r8a77990: Add BRG support to SCIF2
arm64: dts: renesas: r8a77990: Use CPG/MSSR and SYSC binding definitions
arm64: dts: renesas: salvator-xs: Improve SATA switch settings comments
arm64: dts: renesas: r8a77965: Fix clock/reset for usb2_phy1
arm64: dts: renesas: r8a77965: Fix HS-USB compatible
arm64: dts: renesas: r8a77965: Move timer node
arm64: dts: renesas: v3hsk: Move lvds0 node
arm64: dts: renesas: Fix whitespace around assignments
arm64: dts: renesas: r8a77965: m3nulcb-kf: Initial device tree
arm64: dts: renesas: condor: add PCIe support
arm64: dts: renesas: r8a77980: add PCIe support
arm64: dts: renesas: r8a774a1: Add USB3.0 device nodes
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 23 Sep 2018 13:14:40 +0000 (06:14 -0700)]
Merge tag 'renesas-arm-dt-for-v4.20' of https://git./linux/kernel/git/horms/renesas into next/dt
Renesas ARM Based SoC DT Updates for v4.20
* R-Car Gen1 SoCs: Include product name in DTSI files for ease of maintenance
* R-Car Gen2 SoCs:
- Convert to new DU DT bindings
- Correct SATA device sizes to 2 MiB
* R-Car H2 (r8a7790) based Porter board: Add DA9063 OnKey PMIC node
* R-Car E2 (r8a7794) based Silk board: Add DA9063 PMIC, RTC and OnKey nodes
* R-Car M2-N (r8a7793) based Gose board: Add DA9210 node for CPU DVFS
* RZ/G1C (R8A77470) SoC:
- Add GPIO nodes
- Add PFC support
- Use r8a77470-sysc binding definitions
* RZ/G1C (r8a77470) iW-RainboW-G23S dev platform:
- Specify EtherAVB PHY IRQ
- Add pinctl support for scif1
* RZ/N1D (r9a06g032) SoC: Use r9a06g032-sysctrl binding definitions
* tag 'renesas-arm-dt-for-v4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: dts: r9a06g032: Use r9a06g032-sysctrl binding definitions
ARM: dts: Include R-Car Gen1 product name in DTSI files
ARM: dts: stout: Add DA9063 OnKey node
ARM: dts: silk: Add DA9063 RTC and OnKey node
ARM: dts: iwg23s-sbc: specify EtherAVB PHY IRQ
ARM: dts: r8a77470: Add GPIO support
ARM: dts: silk: Add DA9063 PMIC node
ARM: dts: gose: Add DA9210 node for CPU DVFS
ARM: dts: rcar-gen2: Convert to new DU DT bindings
ARM: dts: iwg23s-sbc: Add pinctl support for scif1
ARM: dts: r8a77470: Add PFC support
ARM: dts: r8a77470: Use r8a77470-sysc binding definitions
ARM: dts: rcar: Correct SATA device sizes to 2 MiB
Signed-off-by: Olof Johansson <olof@lixom.net>
Rob Herring [Fri, 21 Sep 2018 12:25:41 +0000 (14:25 +0200)]
ARM: dts: stm32: Fix SPI controller node names
SPI controller nodes should be named 'spi' rather than 'qspi'. Fixing the
name enables dtc SPI bus checks.
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Yannick Fertré [Thu, 20 Sep 2018 14:33:52 +0000 (16:33 +0200)]
ARM: dts: stm32: enable display on stm32mp157c-ev1 board
Enable panel raydium RM68200, DSI bridge & display controller.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Linus Walleij [Thu, 12 Jul 2018 12:52:00 +0000 (14:52 +0200)]
ARM: dts: ux500: Mark PRCMU as syscon compatible
We need to distribute out the responsibilities of the PRCMU
registers instead of having one big lump handling everything.
By making it syscon compatible, we can start grabbing the
register map elsewhere when needed.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Suzuki K Poulose [Wed, 12 Sep 2018 13:53:52 +0000 (14:53 +0100)]
arm: dts: ste: Update coresight bindings for hardware port
Switch to the new coresight bindings
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Rob Herring [Thu, 13 Sep 2018 18:12:34 +0000 (13:12 -0500)]
ARM: dts: ste: Fix SPI controller node names
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Tue, 3 Jul 2018 08:03:47 +0000 (10:03 +0200)]
ARM: dts: ux500: Get rid of DTC warnings
By removing the reference to skeleton.dtsi, defining chosen {}
and proper memory nodes we get warning-free device trees for
the Ux500.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Tue, 3 Jul 2018 08:30:03 +0000 (10:30 +0200)]
ARM: dts: ux500: Fix LCDA clock line muxing
The "lcdaclk_b_1" group is muxed with the function "lcd"
but needs a separate entry to be muxed in with "lcda"
rather than "lcd".
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Geert Uytterhoeven [Tue, 26 Jun 2018 07:50:10 +0000 (09:50 +0200)]
dt-bindings: arm: scu: Correct example SCU unit addresses
The unit addresses of the Cortex-A9 SCU device nodes contain too many
zeroes. Remove them.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Geert Uytterhoeven [Tue, 26 Jun 2018 07:50:09 +0000 (09:50 +0200)]
ARM: dts: ux500: Correct SCU unit address
The unit address of the Cortex-A9 SCU device node contains one zero too
many. Remove it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Vijay Khemka [Tue, 18 Sep 2018 23:41:08 +0000 (16:41 -0700)]
ARM: dts: aspeed: Adding Facebook TiogaPass BMC
Initial introduction of Facebook TiogaPass family equipped with
Aspeed 2500 BMC SoC. TiogaPass is a x86 server development kit
with a ASPEED ast2500 BMC manufactured by Facebook.
Specifically, This adds the TiogaPass platform device tree file
including the flash layout used by the TiogaPass BMC machines.
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Yuan Yao [Thu, 13 Sep 2018 02:25:16 +0000 (10:25 +0800)]
ARM: dts: aspeed: Add HXT StarDragon 4800 REP2 BMC
The HXT StarDragon 4800 REP2 (Reference Evaluation Platform) is
an aarch64 ARMv8 server platform with an ast2520 BMC.
Signed-off-by: Yuan Yao <yao.yuan@linaro.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Amelie Delaunay [Wed, 22 Aug 2018 09:45:00 +0000 (11:45 +0200)]
ARM: dts: stm32: update rtc st,syscfg property on stm32h743
To fit with latest rtc driver updates, rtc st,syscfg property must contain
the control register offset of pwrcfg and the mask corresponding to the
DBP (Disable Backup Protection) bit.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Patrice Chotard [Thu, 26 Jul 2018 07:19:00 +0000 (09:19 +0200)]
ARM: dts: stm32: Remove cd-inverted property for stm32f746-disco
Remove cd-inverted property and update cd-gpios active level
accordingly
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Patrice Chotard [Thu, 26 Jul 2018 07:19:00 +0000 (09:19 +0200)]
ARM: dts: stm32: Remove cd-inverted property for stm32f769-disco
Remove cd-inverted property and update cd-gpios active level
accordingly
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Patrice Chotard [Thu, 26 Jul 2018 07:19:00 +0000 (09:19 +0200)]
ARM: dts: stm32: Remove cd-inverted property for stm32f469-disco
Remove cd-inverted property and update cd-gpios active level
accordingly
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Patrice Chotard [Thu, 26 Jul 2018 07:19:00 +0000 (09:19 +0200)]
ARM: dts: stm32: Remove cd-inverted property for stm32429i-eval
Remove cd-inverted property and update cd-gpios active level
accordingly
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Patrice Chotard [Thu, 19 Jul 2018 13:35:00 +0000 (15:35 +0200)]
ARM: dts: stm32: Add clk-lse node's label on stm32f429
Add missing clk_lse label for node clk-lse.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Suzuki K Poulose [Wed, 12 Sep 2018 13:53:51 +0000 (14:53 +0100)]
arm: dts: sama5d2: Update coresight bindings for hardware ports
Switch to the new coresight bindings for hardware ports
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cedric Roux [Mon, 17 Sep 2018 20:43:50 +0000 (22:43 +0200)]
ARM: s3c24xx: Restore proper usage of pr_info/pr_cont
Fix wrong usage of pr_info introduced by the commit
e728e4f20100 ("ARM:
s3c24xx: formatting cleanup in mach-mini2440.c").
Since the idea is to print on a single line, pr_cont has to be used.
Signed-off-by: Cedric Roux <sed@free.fr>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Eugen Hristev [Wed, 19 Sep 2018 12:39:53 +0000 (15:39 +0300)]
ARM: dts: at91: sama5d27_som1_ek: add adc regulators
Add fixed regulators for the ADC. This board does not have
a programmable PMIC, but fixed regulators.
Adding them to DT so the ADC can probe correctly.
Tested-by: Swapna Gurumani <swapna.gurumani@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Rob Herring [Thu, 13 Sep 2018 18:12:28 +0000 (13:12 -0500)]
ARM: dts: atmel: Fix I2C and SPI bus warnings
dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.
arch/arm/boot/dts/at91-dvk_som60.dtb: Warning (i2c_bus_reg): /ahb/apb/i2c@
f0018000/eeprom@87: I2C bus unit address format error, expected "57"
arch/arm/boot/dts/at91-dvk_som60.dtb: Warning (i2c_bus_reg): /ahb/apb/i2c@
f0018000/ft5426@56: I2C bus unit address format error, expected "38"
arch/arm/boot/dts/at91-vinco.dtb: Warning (i2c_bus_reg): /ahb/apb/i2c@
f8024000/rtc@64: I2C bus unit address format error, expected "32"
arch/arm/boot/dts/at91sam9260ek.dtb: Warning (spi_bus_reg): /ahb/apb/spi@
fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1"
arch/arm/boot/dts/at91sam9g20ek_2mmc.dtb: Warning (spi_bus_reg): /ahb/apb/spi@
fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1"
arch/arm/boot/dts/at91sam9g20ek.dtb: Warning (spi_bus_reg): /ahb/apb/spi@
fffc8000/mtd_dataflash@0: SPI bus unit address format error, expected "1"
arch/arm/boot/dts/at91sam9261ek.dtb: Warning (spi_bus_reg): /ahb/apb/spi@
fffc8000/tsc2046@0: SPI bus unit address format error, expected "2"
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Suzuki K Poulose [Wed, 12 Sep 2018 13:53:47 +0000 (14:53 +0100)]
arm: dts: hip04: Update coresight bindings for hardware ports
Switch to the new the hardware port bindings.
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Manivannan Sadhasivam [Fri, 10 Aug 2018 17:53:39 +0000 (23:23 +0530)]
arm64: dts: Add devicetree support for HiKey970 board
Add devicetree support for HiKey970 development board which
based on Hi3670 SoC and is also one of the 96Boards Consumer
Edition and AI platform.
Only UART6 is enabled which is the default console required
by the 96Boards Consumer Edition Specification.
This patch has been tested on HiKey970 Board.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Manivannan Sadhasivam [Fri, 10 Aug 2018 17:53:38 +0000 (23:23 +0530)]
dt-bindings: arm: hisilicon: Add binding for HiKey970 board
Add devicetree binding for HiKey970 board.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Manivannan Sadhasivam [Fri, 10 Aug 2018 17:53:37 +0000 (23:23 +0530)]
arm64: dts: Add devicetree for Hisilicon Hi3670 SoC
Add initial devicetree support for Hisilicon Hi3670 SoC which
is similar to Hi3660 SoC with NPU support.
This SoC has Octal core BigLittle CPUs in two clusters(4 * A53 & 4 * A73).
Only UART6 has been added for console support which is
pre configured by the bootloader. A fixed clock is sourcing
the UART6 which will get replaced by the clock driver when available.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Manivannan Sadhasivam [Fri, 10 Aug 2018 17:53:36 +0000 (23:23 +0530)]
dt-bindings: arm: hisilicon: Add binding for Hi3670 SoC
Add devicetree binding for Hi3670 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Suzuki K Poulose [Wed, 12 Sep 2018 13:53:44 +0000 (14:53 +0100)]
arm64: dts: hi6220: Update coresight bindings for hardware ports
Switch to updated coresight bindings for hw ports.
Cc: xuwei5@hisilicon.com
Cc: lipengcheng8@huawei.com
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Viresh Kumar [Mon, 23 Jul 2018 03:06:42 +0000 (08:36 +0530)]
arm64: dts: hisilicon: Add missing clocks property for CPUs
The clocks property should either be present for all the CPUs of a
cluster or none. If these are present only for a subset of CPUs of a
cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add missing clocks property.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Nishanth Menon [Wed, 5 Sep 2018 16:20:24 +0000 (11:20 -0500)]
arm64: dts: ti: k3-am6: Add Device Management Security Controller support
Add TISCI compatible System controller for AM6 SoCs.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Nishanth Menon [Wed, 5 Sep 2018 16:20:23 +0000 (11:20 -0500)]
arm64: dts: ti: am654: Add secure proxy instance for main domain
Add secure proxy instance for Main domain
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Nishanth Menon [Wed, 5 Sep 2018 16:20:22 +0000 (11:20 -0500)]
arm64: dts: ti: am654: Add uart nodes
Add uart nodes for AM654 device tree components.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Kishon Vijay Abraham I [Wed, 5 Sep 2018 11:17:38 +0000 (16:47 +0530)]
arm64: dts: ti: k3-am65: Change #address-cells and #size-cells of interconnect to 2
AM65 has two PCIe controllers and each PCIe controller has '2' address
spaces one within the 4GB address space of the SoC and the other above
the 4GB address space of the SoC (cbass_main) in addition to the
register space. The size of the address space above the 4GB SoC address
space is 4GB. These address ranges will be used by CPU/DMA to access
the PCIe address space. In order to represent the address space above
the 4GB SoC address space and to represent the size of this address
space as 4GB, change address-cells and size-cells of interconnect to 2.
Since OSPI has similar need in MCU Domain Memory Map, change
address-cells and size-cells of cbass_mcu interconnect also to 2.
Fixes:
ea47eed33a3fe3d919 ("arm64: dts: ti: Add Support for AM654 SoC")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Vignesh R <vigneshr@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Rob Herring [Thu, 13 Sep 2018 18:12:39 +0000 (13:12 -0500)]
ARM: dts: xilinx: Fix I2C and SPI bus warnings
dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.
arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c@
e0004000/i2c-mux@74/i2c@7/hwmon@52: I2C bus unit address format error, expected "34"
arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c@
e0004000/i2c-mux@74/i2c@7/hwmon@53: I2C bus unit address format error, expected "35"
arch/arm/boot/dts/zynq-zc702.dtb: Warning (i2c_bus_reg): /amba/i2c@
e0004000/i2c-mux@74/i2c@7/hwmon@54: I2C bus unit address format error, expected "36"
arch/arm/boot/dts/zynq-zc770-xm013.dtb: Warning (spi_bus_reg): /amba/spi@
e0006000/eeprom@0: SPI bus unit address format error, expected "2"
arch/arm/boot/dts/zynq-zc770-xm010.dtb: Warning (spi_bus_reg): /amba/spi@
e0007000/flash@0: SPI bus unit address format error, expected "1"
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Dinh Nguyen [Mon, 10 Sep 2018 14:12:08 +0000 (09:12 -0500)]
ARM: dts: socfpga: add timer resets for SoCFPGA platform
Add the resets property for all the timers on the Cyclone5/Arria5/Arria10
platforms.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Rob Herring [Thu, 13 Sep 2018 18:12:41 +0000 (13:12 -0500)]
arm64: dts: meson: Fix erroneous SPI bus warnings
dtc has new checks for SPI buses. The meson dts files have a node named
spi' which causes false positive warnings. As the node is a pinctrl child
node, change the node name to be 'spi-pins' to fix the warnings.
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb: Warning (spi_bus_bridge): /soc/periphs@
c8834000/pinctrl@4b0/spi: incorrect #address-cells for SPI bus
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: linux-amlogic@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Dinh Nguyen [Fri, 14 Sep 2018 04:52:49 +0000 (23:52 -0500)]
ARM: dts: socfpga: Fix I2C bus unit-address error
dtc has new checks for I2C buses. Fix the warnings in unit-addresses.
arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dtb: Warning (i2c_bus_reg): /soc/i2c@
ffc04000/adxl345@0: I2C bus unit address format error, expected "53"
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Patrick Venture [Tue, 4 Sep 2018 15:53:29 +0000 (08:53 -0700)]
ARM: dts: aspeed: quanta-q71l: Enable adc & ibt nodes
This machine uses the ADC and iBT devices.
Signed-off-by: Patrick Venture <venture@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Patrick Venture [Fri, 31 Aug 2018 20:58:55 +0000 (13:58 -0700)]
ARM: dts: aspeed: quanta-q71l: Add four PSUs
Enable the four PSUs via generic PMBUS.
Signed-off-by: Patrick Venture <venture@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Patrick Venture [Fri, 31 Aug 2018 20:58:39 +0000 (13:58 -0700)]
ARM: dts: aspeed: quanta-q71l: add aliases for i2c
Provide aliases to each i2c bus per labels added for
each PCIe slot, etc, that are downstream beyond a mux.
Signed-off-by: Patrick Venture <venture@google.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Rob Herring [Thu, 13 Sep 2018 18:12:27 +0000 (13:12 -0500)]
ARM: dts: aspeed: Fix I2C bus warnings
dtc has new checks for I2C buses. The ASpeed dts files have a node named
'i2c' which causes a false positive warning. As the node is a 'simple-bus',
correct the node name to be 'bus' to fix the warnings.
arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@
1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-opp-romulus.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@
1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-ast2500-evb.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@
1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@
1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@
1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@
1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@
1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-opp-zaius.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@
1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@
1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@
1e78a000: incorrect #size-cells for I2C bus
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: linux-aspeed@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Rob Herring [Thu, 13 Sep 2018 18:12:30 +0000 (13:12 -0500)]
ARM: dts: bcm: Fix SPI bus warnings
dtc has new checks for SPI buses. Fix the warnings in node names.
arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dtb: Warning (spi_bus_bridge): /axi@
18000000/qspi@27200: node name for SPI buses should be 'spi'
arch/arm/boot/dts/bcm958525er.dtb: Warning (spi_bus_bridge): /axi/qspi@27200: node name for SPI buses should be 'spi'
arch/arm/boot/dts/bcm958525xmc.dtb: Warning (spi_bus_bridge): /axi/qspi@27200: node name for SPI buses should be 'spi'
arch/arm/boot/dts/bcm958622hr.dtb: Warning (spi_bus_bridge): /axi/qspi@27200: node name for SPI buses should be 'spi'
arch/arm/boot/dts/bcm958625hr.dtb: Warning (spi_bus_bridge): /axi/qspi@27200: node name for SPI buses should be 'spi'
arch/arm/boot/dts/bcm988312hr.dtb: Warning (spi_bus_bridge): /axi/qspi@27200: node name for SPI buses should be 'spi'
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Jon Mason <jonmason@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Rob Herring [Thu, 13 Sep 2018 18:12:42 +0000 (13:12 -0500)]
arm64: dts: broadcom: Fix I2C and SPI bus warnings
dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.
arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dtb: Warning (i2c_bus_reg): /hsls/i2c@e0000/pcf8574@20: I2C bus unit address format error, expected "27"
arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dtb: Warning (i2c_bus_reg): /hsls/i2c@e0000/pcf8574@20: I2C bus unit address format error, expected "27"
arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dtb: Warning (spi_bus_bridge): /hsls/ssp@180000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dtb: Warning (spi_bus_bridge): /hsls/ssp@190000: node name for SPI buses should be 'spi'
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Jon Mason <jonmason@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Florian Fainelli [Thu, 13 Sep 2018 18:13:30 +0000 (11:13 -0700)]
Merge tag 'tags/bcm2835-dt-next-2018-09-09' into devicetree/next
This pull request brings in a board DT for the Raspberry Pi Compute
Module 3, its I/O board and enables the Ethernet LEDs for the RPi 3B+.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Florian Fainelli [Fri, 31 Aug 2018 19:20:39 +0000 (12:20 -0700)]
ARM: dts: NSP: Wire up switch interrupts
The Switch Register Access Block (SRAB) has one interrupt for link state
change on each ports (0-5, 7-8) a PHY interrupt, timestamping interrupt
and sleep timer interrupts for each management ports (5,7,8). Wire those
up so we can utilize them to speed up link resolution.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Florian Fainelli [Fri, 31 Aug 2018 19:20:38 +0000 (12:20 -0700)]
dt-bindings: net: dsa: Document B53 SRAB interrupts and registers
Document the Broadcom roboswitch Switch Register Access Block interrupt
lines and additional register base addresses for port mux configuration
and SGMII status/configuration registers.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Florian Fainelli [Fri, 31 Aug 2018 19:20:37 +0000 (12:20 -0700)]
ARM: dts: NSP: Enable SFP on bcm958625hr
Enable the SFP connected to port 5 of the switch and wire up all GPIOs
to the SFP cage. Because of a hardware limitation of the i2c controller
on the iProc SoCs which prevents large i2c (> 63 bytes) transactions to
work, we use the i2c-gpio interface instead, which does not have that
limitation. This allows us to read the SFP module EEPROM, which would
not be possible otherwise since it exceeds that size during a single
read transfer.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Neil Armstrong [Thu, 13 Sep 2018 07:12:27 +0000 (09:12 +0200)]
arm64: dts: meson: Switch simple-mfd and syscon order
The order between "syscon" and "simple-mfd" is important because in these
particular cases, the node needs to be first a "simple-mfd" to expose
it's sub-nodes, and later on a "syscon" to permit other nodes to access
this register space through the "syscon" mechanism.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Hoan Nguyen An [Fri, 24 Aug 2018 04:52:28 +0000 (13:52 +0900)]
arm64: dts: r8a77965: add FDP1 device nodes
The r8a77965 has a single FDP1 instance.
Signed-off-by: Hoan Nguyen An <na-hoan@jinso.co.jp>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Thu, 6 Sep 2018 12:41:01 +0000 (14:41 +0200)]
arm64: dts: renesas: draak: Sort device nodes
- Device nodes with unit addresses are sorted by unit address,
- Device nodes without unit addresses and references are sorted
alphabetically.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Wolfram Sang [Tue, 21 Aug 2018 19:03:56 +0000 (21:03 +0200)]
arm64: dts: renesas: enable SDR104 on R-Car Gen3
Successfully tested on H3 ES1.0 and ES2.0, M3-W ES1.0, and M3-N ES1.0.
Even previously stubborn cards work fine. Transfer rates were >60MB/s.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Takeshi Kihara [Tue, 4 Sep 2018 20:22:27 +0000 (05:22 +0900)]
arm64: dts: renesas: r8a77990: Add SYS-DMAC device nodes
This patch adds SYS-DMAC{0,1,2} device nodes for the R8A77990 SoC.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Takeshi Kihara [Wed, 5 Sep 2018 15:29:44 +0000 (17:29 +0200)]
arm64: dts: renesas: r8a77990: Add I2C device nodes
Add device nodes for I2C ch[0-7] to R-Car E3 R8A77990 device tree.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Koji Matsuoka [Wed, 5 Sep 2018 15:29:43 +0000 (17:29 +0200)]
arm64: dts: renesas: r8a77990: Add VIN and CSI-2 device nodes
Add device nodes for VIN4, VIN5 and CSI40 to R-Car E3 R8A77990 device tree.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[simon: sorted nodes by bus address, then IP block]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Mon, 3 Sep 2018 17:30:00 +0000 (19:30 +0200)]
arm64: dts: renesas: r8a77990: Add all MSIOF nodes
Add the device nodes for all MSIOF SPI controllers, incl. clocks, power
domains, and resets properties.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert Uytterhoeven [Fri, 31 Aug 2018 08:54:57 +0000 (10:54 +0200)]
arm64: dts: renesas: r8a7795: Move arm_cc630p node
To preserve by-address-per-group sort order.
Fixes:
0f6d237cafda2e06 ("arm64: dts: renesas: r8a7795: add ccree to device tree")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>