Wolfgang Denk [Thu, 27 Dec 2007 01:01:15 +0000 (02:01 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
Martin Krause [Mon, 12 Nov 2007 09:56:17 +0000 (10:56 +0100)]
Some configuration updates for the TQM5200 based TB5200 board:
- enable command line history
- increase malloc space (because of bigger flash sectors)
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Martin Krause [Thu, 27 Sep 2007 09:10:08 +0000 (11:10 +0200)]
TQM8xx: use the CFI flash driver on all TQM8xx boards
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Martin Krause [Wed, 26 Sep 2007 15:55:56 +0000 (17:55 +0200)]
TQM885D: adjust for doubled flash sector size + some minor fixes
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Jens Gehrlein [Wed, 26 Sep 2007 15:55:54 +0000 (17:55 +0200)]
TQM885D: Exchanged SDRAM timing by a more relaxed timing.
CAS-Latency=2, Write Recovery Time tWR=2
The max. supported bus frequency is 66 MHz. Therefore, changed
threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Martin Krause [Wed, 26 Sep 2007 15:55:56 +0000 (17:55 +0200)]
TQM885D: use calculated cpuclk instead of measuring it
On the TQM885D the measurement of cpuclk with the PIT reference
timer ist not necessary. Since all module variants use the same
external 10 MHz oscillator, the cpuclk only depends on the PLL
configuration - which is readable by software.
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Jens Gehrlein [Thu, 27 Sep 2007 12:54:46 +0000 (14:54 +0200)]
TQM885D: fix SDRAM refresh
At 133 MHz the current SDRAM refresh rate is too fast
(measured 4 * 1.17 us).
CFG_MAMR_PTA changes from 39 to 128. This result
in a refresh rate of 4 * 7.8 us at the default clock
66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
This is a compromise until a new method is found to
adjust the refresh rate.
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Jens Gehrlein [Thu, 27 Sep 2007 12:54:46 +0000 (14:54 +0200)]
TQM860M: Support for 10col SDRAMs, max. 128 MiB
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Wolfgang Denk [Thu, 27 Dec 2007 00:52:50 +0000 (01:52 +0100)]
Fix coding style issues; update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Thu, 27 Dec 2007 00:13:05 +0000 (01:13 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Thu, 27 Dec 2007 00:12:56 +0000 (01:12 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-sh
Conflicts:
MAINTAINERS
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Wed, 26 Dec 2007 23:46:17 +0000 (00:46 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/custodians
Wolfgang Denk [Wed, 26 Dec 2007 23:46:08 +0000 (00:46 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-avr32
Wolfgang Denk [Wed, 26 Dec 2007 23:35:03 +0000 (00:35 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-mpc85xx
Wolfgang Denk [Wed, 26 Dec 2007 23:22:24 +0000 (00:22 +0100)]
Merge branch 'testing' of git://denx.de/git/u-boot-fdt
Haavard Skinnemoen [Fri, 14 Dec 2007 14:36:18 +0000 (15:36 +0100)]
cfi_flash: Add manufacturer-specific fixups
Run fixups based on the JEDEC manufacturer ID independent of the
command set ID.
This changes current behaviour: Previously, geometry reversal for AMD
chips were done based on the command set ID, while they are now done
based on the JEDEC manufacturer and device ID.
Also add fixup for top-boot Atmel chips. A fixup is needed for
AT49BV6416(T) too, but since u-boot currently only reads the low byte
of the device ID, there's no way to tell it apart from AT49BV642D,
which should not have this fixup. Since AT49BV642D support is
necessary to get ATNGW100 board support into mainline, I've commented
out the fixup for now.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Fri, 14 Dec 2007 14:36:17 +0000 (15:36 +0100)]
cfi_flash: Add cmdset-specific init functions
Move things like reading JEDEC IDs and fixing up geometry reversal
into separate functions. The geometry reversal fixup is now performed
by altering the qry structure directly, which makes the sector init
code slightly cleaner.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Fri, 14 Dec 2007 14:36:16 +0000 (15:36 +0100)]
cfi_flash: Read whole QRY structure in one go
Read out the whole CFI Standard Query structure after successful cfi
identification. This allows subsequent code to access this information
directly without having to go through flash_read_uchar() and friends.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Mon, 17 Dec 2007 10:02:44 +0000 (11:02 +0100)]
AVR32: Fix logic inversion in disable_interrupts()
disable_interrupts() should return nonzero if interrupts were
_enabled_ before, not disabled.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Fri, 14 Dec 2007 15:51:22 +0000 (16:51 +0100)]
AVR32: Enable interrupts at bootup
The timer code depends on the timer interrupt to keep track of the
upper 32 bits of the cycle counter. This obviously doesn't work when
interrupts are disabled the whole time.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Thu, 15 Nov 2007 09:03:45 +0000 (10:03 +0100)]
AVR32: Fix wrong pin setup for USART3
As reported by Gerhard Berghofer:
in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
instead of PB18 and PB19.
which is obviously correct. There's currently no code that uses
USART3, but custom boards may run into problems.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Thu, 1 Nov 2007 11:44:20 +0000 (12:44 +0100)]
README: Remove ATSTK1000 daughterboard list
As noted by Kim Phillips, these lists tend to become out of date.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Tue, 30 Oct 2007 13:56:36 +0000 (14:56 +0100)]
Add ATSTK100[234] to MAINTAINERS
Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
"mother". Also update the entry for ATSTK1000 to be not only about the
AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Mon, 29 Oct 2007 12:02:54 +0000 (13:02 +0100)]
AVR32: Add support for the ATSTK1004 board
ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
which is a derivative of AT32AP7000.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Mon, 29 Oct 2007 12:02:54 +0000 (13:02 +0100)]
AVR32: Add support for the ATSTK1003 board
ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
which is a derivative of AT32AP7000.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Mon, 29 Oct 2007 12:23:33 +0000 (13:23 +0100)]
AVR32: Make some AT32AP700x peripherals optional
Add a chip-features file providing definitions of the form
AT32AP700x_CHIP_HAS_<peripheral>
to indicate the availability of the given peripheral on the currently
selected chip.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Mon, 29 Oct 2007 12:09:56 +0000 (13:09 +0100)]
AVR32: Rename at32ap7000 -> at32ap700x
The SoC-specific code for all the AT32AP700x CPUs is practically
identical; the only difference is that some chips have less features
than others. By doing this rename, we can add support for the AP7000
derivatives simply by making some features conditional.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Fri, 29 Jun 2007 16:22:34 +0000 (18:22 +0200)]
atmel_mci: Show SR when block read fails
Show controller status as well as card status when an error occurs
during block read.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Thu, 13 Dec 2007 11:56:34 +0000 (12:56 +0100)]
cfi_flash: Use map_physmem() and unmap_physmem()
Use map_physmem() and unmap_physmem() to convert from physical to
virtual addresses. This gives the arch a chance to provide an uncached
mapping for flash accesses.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Thu, 13 Dec 2007 11:56:33 +0000 (12:56 +0100)]
Introduce map_physmem() and unmap_physmem()
map_physmem() returns a virtual address which can be used to access a
given physical address without involving the cache. unmap_physmem()
should be called when the virtual address returned by map_physmem() is
no longer needed.
This patch adds a stub implementation which simply returns the
physical address cast to a uchar * for all architectures except AVR32,
which converts the physical address to an uncached virtual mapping.
unmap_physmem() is a no-op on all architectures, but if any
architecture needs to do such mappings through the TLB, this is the
hook where those TLB entries can be invalidated.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Thu, 13 Dec 2007 11:56:32 +0000 (12:56 +0100)]
cfi_flash: Introduce read and write accessors
Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
them to access the flash memory. This makes it clearer when the flash
is actually being accessed; merely dereferencing a volatile pointer
looks just like any other kind of access.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Thu, 13 Dec 2007 11:56:31 +0000 (12:56 +0100)]
Implement __raw_{read,write}[bwl] on all architectures
This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
from Linux.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Sat, 6 Oct 2007 16:55:36 +0000 (18:55 +0200)]
cfi_flash: Reorder functions and eliminate extra prototypes
Reorder the functions in cfi_flash.c so that each function only uses
functions that have been defined before it. This allows the static
prototype declarations near the top to be eliminated and might allow
gcc to do a better job inlining functions.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Thu, 13 Dec 2007 11:56:29 +0000 (12:56 +0100)]
cfi_flash: Make some needlessly global functions static
Make functions not declared in any header file static.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Thu, 13 Dec 2007 11:56:28 +0000 (12:56 +0100)]
cfi_flash: Break long lines
This patch tries to keep all lines in the cfi_flash driver below 80
columns. There are a few lines left which don't fit this requirement
because I couldn't find any trivial way to break them (i.e. it would
take some restructuring, which I intend to do in a later patch.)
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Bartlomiej Sieka [Tue, 11 Dec 2007 12:59:57 +0000 (13:59 +0100)]
CFI: synchronize command offsets with Linux CFI driver
Fixes non-working CFI Flash on the Inka4x0 board.
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
Kumar Gala [Fri, 7 Dec 2007 18:17:34 +0000 (12:17 -0600)]
Handle MPC85xx PCIe reset errata (PCI-Ex 38)
On the MPC85xx boards that have PCIe enable the PCIe errata fix.
(MPC8544DS, MPC8548CDS, MPC8568MDS).
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Fri, 7 Dec 2007 18:04:30 +0000 (12:04 -0600)]
Update Freescale MPC85xx ADS/CDS/MDS board config
* Enabled CONFIG_CMD_ELF
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Fri, 7 Dec 2007 10:59:26 +0000 (04:59 -0600)]
Handle Asynchronous DDR clock on 85xx
The MPC8572 introduces the concept of an asynchronous DDR clock with
regards to the platform clock.
Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
mode.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 29 Nov 2007 16:34:28 +0000 (10:34 -0600)]
Update Freescale MPC85xx ADS/CDS/MDS board config
* Removed some misc environment setup
* Enabled CONFIG_CMDLINE_EDITING
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 29 Nov 2007 16:47:44 +0000 (10:47 -0600)]
Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
Minor path corrections needed to ensure buildability.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 29 Nov 2007 16:16:18 +0000 (10:16 -0600)]
Move the MPC8540 ADS board under board/freescale.
Minor path corrections needed to ensure buildability.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 29 Nov 2007 16:14:50 +0000 (10:14 -0600)]
Move the MPC8560 ADS board under board/freescale.
Minor path corrections needed to ensure buildability.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 29 Nov 2007 16:13:47 +0000 (10:13 -0600)]
Move the MPC8568 MDS board under board/freescale.
Minor path corrections needed to ensure buildability.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 29 Nov 2007 08:18:59 +0000 (02:18 -0600)]
Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
We already had defines for LAWAR_TRGT_IF_* that we should use
rather than creating new ones. Also, added some missing defines for
PCIE targets.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 29 Nov 2007 08:10:09 +0000 (02:10 -0600)]
Stop using immap_t on 85xx
In the future the offsets to various blocks may not be in same location.
Move to using CFG_MPC85xx_*_ADDR as the base of the registers
instead of getting it via &immap.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 29 Nov 2007 07:23:09 +0000 (01:23 -0600)]
Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 29 Nov 2007 07:06:19 +0000 (01:06 -0600)]
Update MPC8568 MDS to use libfdt
Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
ethernet, pci, and serial for the various fixups that are done.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Haiying Wang [Wed, 14 Nov 2007 20:52:06 +0000 (15:52 -0500)]
Add PCI Express support on MPC8568MDS
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 29 Nov 2007 06:11:44 +0000 (00:11 -0600)]
Update MPC85xx CDS to use libfdt
Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
ethernet, pci, and serial for the various fixups that are done.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 29 Nov 2007 04:54:27 +0000 (22:54 -0600)]
Update MPC8540 ADS to use libfdt
Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
ethernet, pci, and serial for the various fixups that are done.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 29 Nov 2007 04:40:31 +0000 (22:40 -0600)]
Update MPC8560 ADS to use libfdt
Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
ethernet, pci, and serial for the various fixups that are done.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 28 Nov 2007 06:36:33 +0000 (00:36 -0600)]
Stop using immap_t for cpm offset on 85xx
In the future the offsets to various blocks may not be in same location.
Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
instead of getting it via &immap->im_cpm.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 28 Nov 2007 05:25:02 +0000 (23:25 -0600)]
Stop using immap_t for guts offset on 85xx
In the future the offsets to various blocks may not be in same location.
Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
instead of getting it via &immap->im_gur.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 28 Nov 2007 04:42:34 +0000 (22:42 -0600)]
Update MPC8544 DS config
* Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
* Removed some misc environment setup
* Moved to using fdtfile & fdtaddr as fdt env var names
* Enabled CONFIG_CMDLINE_EDITING
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Mon, 26 Nov 2007 23:12:24 +0000 (17:12 -0600)]
Update MPC8544DS to use libfdt
Updated the MPC8544DS config to use libfdt and assume use of aliases for
ethernet, pci, and serial for the various fixups that are done.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 29 Nov 2007 06:15:30 +0000 (00:15 -0600)]
Add libfdt based ft_cpu_setup for mpc85xx
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Stefan Roese [Sat, 8 Dec 2007 07:25:09 +0000 (08:25 +0100)]
CFI: Coding style cleanup
Signed-off-by: Stefan Roese <sr@denx.de>
Michael Schwingen [Fri, 7 Dec 2007 22:35:02 +0000 (23:35 +0100)]
CFI: support JEDEC flash roms in CFI-flash framework
The following patch adds support for non-CFI flash ROMS, by hooking into the
CFI flash code and using most of its code, as recently discussed here in the
thread "Mixing CFI and non-CFI flashs".
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Signed-off-by: Stefan Roese <sr@denx.de>
Gerald Van Baren [Thu, 29 Nov 2007 02:24:50 +0000 (21:24 -0500)]
Conditionally compile fdt_fixup_ethernet()
Fix compiler warnings: On boards that don't have ethernets defined,
don't compile fdt_fixup_ethernet().
Kumar Gala [Wed, 28 Nov 2007 03:59:46 +0000 (21:59 -0600)]
Convert boards that set memory node to use fdt_fixup_memory()
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Mon, 26 Nov 2007 23:06:15 +0000 (17:06 -0600)]
Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
We use a combination of the serialN alias and CONFIG_CONS_INDEX to
determine which serial alias we should set linux,stdout-path to.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Mon, 26 Nov 2007 20:57:45 +0000 (14:57 -0600)]
Add common memory fixup function
Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Mon, 26 Nov 2007 17:19:12 +0000 (11:19 -0600)]
Conditionally compile fdt_support.c
Modify common/Makefile to conditionally compile fdt_support.c based
on CONFIG_OF_LIBFDT.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Mon, 26 Nov 2007 16:41:40 +0000 (10:41 -0600)]
Fix build breakage due to libfdt import
The IDS8247 got lost in the update and need an API update
do to rename of functions in libfdt.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Gerald Van Baren [Sat, 24 Nov 2007 00:43:20 +0000 (19:43 -0500)]
Add spaces around the = in the fdt print format.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Nobuhiro Iwamatsu [Thu, 6 Dec 2007 16:25:38 +0000 (01:25 +0900)]
sh: Moved driver of the SuperH dependence
The composition of the directory in the drivers/ changed.
I moved SuperH serial driver and marubun PCMCIA driver.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Thu, 6 Dec 2007 16:20:25 +0000 (01:20 +0900)]
Merge git://www.denx.de/git/u-boot
Nobuhiro Iwamatsu [Thu, 6 Dec 2007 16:20:16 +0000 (01:20 +0900)]
Merge git://www.denx.de/git/u-boot
Conflicts:
drivers/Makefile
Wolfgang Denk [Thu, 6 Dec 2007 09:21:19 +0000 (10:21 +0100)]
Release v1.3.1
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Thu, 6 Dec 2007 09:21:03 +0000 (10:21 +0100)]
ADS5121 Board: fix compile problem.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 2 Dec 2007 23:15:28 +0000 (00:15 +0100)]
Prepare for 1.3.1-rc1
Signed-off-by: Wolfgang Denk <wd@denx.de>
Nobuhiro Iwamatsu [Wed, 28 Nov 2007 16:21:54 +0000 (01:21 +0900)]
sh: Add SuperH boards maintainer to MAINTAINERS file
Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Wed, 28 Nov 2007 15:13:04 +0000 (00:13 +0900)]
sh: Add ms7750se support in MAKEALL
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Jean-Christophe PLAGNIOL-VILLARD [Tue, 27 Nov 2007 08:44:53 +0000 (09:44 +0100)]
sh: Add sh3 and sh4 support in MAKEALL
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Sat, 24 Nov 2007 17:51:17 +0000 (02:51 +0900)]
sh: Add document for SuperH.
This document is a summary of information concerning SuperH of U-Boot.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Sat, 24 Nov 2007 17:39:31 +0000 (02:39 +0900)]
sh: Add marubun's pcmcia driver
Marubun pcmcia is a chip for PCMCIA used with SuperH.
Of course, this can be used even by other architectures.
When use this driver, came to be able to use CompactFlash
and Ethernet.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Sat, 24 Nov 2007 17:32:13 +0000 (02:32 +0900)]
sh: Update SuperH SCIF driver
- Changed volatile unsigned to vu_.
- Changed Makefile for kconfig.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Nobuhiro Iwamatsu [Wed, 28 Nov 2007 15:56:37 +0000 (00:56 +0900)]
Merge git://www.denx.de/git/u-boot
Conflicts:
drivers/Makefile
Wolfgang Denk [Mon, 26 Nov 2007 21:57:53 +0000 (22:57 +0100)]
Merge commit '3deca9d'
Conflicts:
Makefile
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 26 Nov 2007 18:18:21 +0000 (19:18 +0100)]
Cleanup coding style; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 26 Nov 2007 18:15:04 +0000 (19:15 +0100)]
Merge commit '87ddedd'
Jean-Christophe PLAGNIOL-VILLARD [Sun, 25 Nov 2007 21:39:25 +0000 (22:39 +0100)]
MAKEALL: add missing 512x boards in ppc
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sun, 25 Nov 2007 17:45:47 +0000 (18:45 +0100)]
Makefile : fix tags ctags etags with new drivers organization
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sun, 25 Nov 2007 17:45:47 +0000 (18:45 +0100)]
Makefile : fix tags ctags etags with new drivers organization
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 24 Nov 2007 20:26:56 +0000 (21:26 +0100)]
drivers/mtd : move mtd drivers to drivers/mtd
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 24 Nov 2007 20:17:55 +0000 (21:17 +0100)]
drivers/misc : move misc drivers to drivers/misc
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 24 Nov 2007 20:13:59 +0000 (21:13 +0100)]
drivers/block : move block drivers to drivers/block
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 24 Nov 2007 19:59:50 +0000 (20:59 +0100)]
drivers/rtc : move rtc drivers to drivers/rtc
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 24 Nov 2007 19:14:44 +0000 (20:14 +0100)]
drivers/hwmon : move hardware monitor drviers to drivers/hwmon
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 24 Nov 2007 18:46:45 +0000 (19:46 +0100)]
drivers/input : move input drivers to drivers/input
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 24 Nov 2007 18:40:11 +0000 (19:40 +0100)]
drivers/usb : move usb drivers to drivers/usb
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 24 Nov 2007 18:33:38 +0000 (19:33 +0100)]
drivers/serial : move serial drivers to drivers/serial
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Wed, 21 Nov 2007 20:19:24 +0000 (21:19 +0100)]
drivers/net : move net drivers to drivers/net
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Tue, 20 Nov 2007 19:41:48 +0000 (20:41 +0100)]
drivers/video : move video drivers to drivers/video
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Tue, 20 Nov 2007 19:33:09 +0000 (20:33 +0100)]
drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Tue, 20 Nov 2007 19:28:09 +0000 (20:28 +0100)]
drivers/pci : move pci drivers to drivers/pci
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Wolfgang Denk [Thu, 22 Nov 2007 23:55:23 +0000 (00:55 +0100)]
Merge branch 'testing' of git://denx.de/git/u-boot-fdt
Gerald Van Baren [Thu, 22 Nov 2007 22:23:23 +0000 (17:23 -0500)]
Fix fdt printing for updated libfdt
Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Kumar Gala [Wed, 21 Nov 2007 19:30:15 +0000 (13:30 -0600)]
Add additional fdt fixup helper functions
Added the following fdt fixup helpers:
* do_fixup_by_prop{_u32} - Find matching nodes by property name/value
* do_fixup_by_compat{_u32} - Find matching nodes by compat
The _u32 variants work the same only the property they are setting
is know to be a 32-bit integer instead of a byte buffer.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>