ext4: fix bug_on in __es_tree_search caused by bad quota inode

commit d323877484765aaacbb2769b06e355c2041ed115 upstream.

We got a issue as fllows:
==================================================================
 kernel BUG at fs/ext4/extents_status.c:202!
 invalid opcode: 0000 [#1] PREEMPT SMP
 CPU: 1 PID: 810 Comm: mount Not tainted 6.1.0-rc1-next-g9631525255e3 #352
 RIP: 0010:__es_tree_search.isra.0+0xb8/0xe0
 RSP: 0018:ffffc90001227900 EFLAGS: 00010202
 RAX: 0000000000000000 RBX: 0000000077512a0f RCX: 0000000000000000
 RDX: 0000000000000002 RSI: 0000000000002a10 RDI: ffff8881004cd0c8
 RBP: ffff888177512ac8 R08: 47ffffffffffffff R09: 0000000000000001
 R10: 0000000000000001 R11: 00000000000679af R12: 0000000000002a10
 R13: ffff888177512d88 R14: 0000000077512a10 R15: 0000000000000000
 FS: 00007f4bd76dbc40(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00005653bf993cf8 CR3: 000000017bfdf000 CR4: 00000000000006e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <TASK>
  ext4_es_cache_extent+0xe2/0x210
  ext4_cache_extents+0xd2/0x110
  ext4_find_extent+0x5d5/0x8c0
  ext4_ext_map_blocks+0x9c/0x1d30
  ext4_map_blocks+0x431/0xa50
  ext4_getblk+0x82/0x340
  ext4_bread+0x14/0x110
  ext4_quota_read+0xf0/0x180
  v2_read_header+0x24/0x90
  v2_check_quota_file+0x2f/0xa0
  dquot_load_quota_sb+0x26c/0x760
  dquot_load_quota_inode+0xa5/0x190
  ext4_enable_quotas+0x14c/0x300
  __ext4_fill_super+0x31cc/0x32c0
  ext4_fill_super+0x115/0x2d0
  get_tree_bdev+0x1d2/0x360
  ext4_get_tree+0x19/0x30
  vfs_get_tree+0x26/0xe0
  path_mount+0x81d/0xfc0
  do_mount+0x8d/0xc0
  __x64_sys_mount+0xc0/0x160
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
==================================================================

Above issue may happen as follows:
-------------------------------------
ext4_fill_super
 ext4_orphan_cleanup
  ext4_enable_quotas
   ext4_quota_enable
    ext4_iget --> get error inode <5>
     ext4_ext_check_inode --> Wrong imode makes it escape inspection
     make_bad_inode(inode) --> EXT4_BOOT_LOADER_INO set imode
    dquot_load_quota_inode
     vfs_setup_quota_inode --> check pass
     dquot_load_quota_sb
      v2_check_quota_file
       v2_read_header
        ext4_quota_read
         ext4_bread
          ext4_getblk
           ext4_map_blocks
            ext4_ext_map_blocks
             ext4_find_extent
              ext4_cache_extents
               ext4_es_cache_extent
                __es_tree_search.isra.0
                 ext4_es_end --> Wrong extents trigger BUG_ON

In the above issue, s_usr_quota_inum is set to 5, but inode<5> contains
incorrect imode and disordered extents. Because 5 is EXT4_BOOT_LOADER_INO,
the ext4_ext_check_inode check in the ext4_iget function can be bypassed,
finally, the extents that are not checked trigger the BUG_ON in the
__es_tree_search function. To solve this issue, check whether the inode is
bad_inode in vfs_setup_quota_inode().

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221026042310.3839669-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: add helper to check quota inums

commit 07342ec259df2a35d6a34aebce010567a80a0e15 upstream.

Before quota is enabled, a check on the preset quota inums in
ext4_super_block is added to prevent wrong quota inodes from being loaded.
In addition, when the quota fails to be enabled, the quota type and quota
inum are printed to facilitate fault locating.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221026042310.3839669-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: add EXT4_IGET_BAD flag to prevent unexpected bad inode

commit 63b1e9bccb71fe7d7e3ddc9877dbdc85e5d2d023 upstream.

There are many places that will get unhappy (and crash) when ext4_iget()
returns a bad inode. However, if iget the boot loader inode, allows a bad
inode to be returned, because the inode may not be initialized. This
mechanism can be used to bypass some checks and cause panic. To solve this
problem, we add a special iget flag EXT4_IGET_BAD. Only with this flag
we'd be returning bad inode from ext4_iget(), otherwise we always return
the error code if the inode is bad inode.(suggested by Jan Kara)

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221026042310.3839669-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix undefined behavior in bit shift for ext4_check_flag_values

commit 3bf678a0f9c017c9ba7c581541dbc8453452a7ae upstream.

Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:

UBSAN: shift-out-of-bounds in fs/ext4/ext4.h:591:2
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
 <TASK>
 dump_stack_lvl+0x7d/0xa5
 dump_stack+0x15/0x1b
 ubsan_epilogue+0xe/0x4e
 __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
 ext4_init_fs+0x5a/0x277
 do_one_initcall+0x76/0x430
 kernel_init_freeable+0x3b3/0x422
 kernel_init+0x24/0x1e0
 ret_from_fork+0x1f/0x30
 </TASK>

Fixes: 9a4c80194713 ("ext4: ensure Inode flags consistency are checked at build time")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221031055833.3966222-1-cuigaosheng1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix use-after-free in ext4_orphan_cleanup

commit a71248b1accb2b42e4980afef4fa4a27fa0e36f5 upstream.

I caught a issue as follows:
==================================================================
 BUG: KASAN: use-after-free in __list_add_valid+0x28/0x1a0
 Read of size 8 at addr ffff88814b13f378 by task mount/710

 CPU: 1 PID: 710 Comm: mount Not tainted 6.1.0-rc3-next #370
 Call Trace:
  <TASK>
  dump_stack_lvl+0x73/0x9f
  print_report+0x25d/0x759
  kasan_report+0xc0/0x120
  __asan_load8+0x99/0x140
  __list_add_valid+0x28/0x1a0
  ext4_orphan_cleanup+0x564/0x9d0 [ext4]
  __ext4_fill_super+0x48e2/0x5300 [ext4]
  ext4_fill_super+0x19f/0x3a0 [ext4]
  get_tree_bdev+0x27b/0x450
  ext4_get_tree+0x19/0x30 [ext4]
  vfs_get_tree+0x49/0x150
  path_mount+0xaae/0x1350
  do_mount+0xe2/0x110
  __x64_sys_mount+0xf0/0x190
  do_syscall_64+0x35/0x80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  </TASK>
 [...]
==================================================================

Above issue may happen as follows:
-------------------------------------
ext4_fill_super
  ext4_orphan_cleanup
   --- loop1: assume last_orphan is 12 ---
    list_add(&EXT4_I(inode)->i_orphan, &EXT4_SB(sb)->s_orphan)
    ext4_truncate --> return 0
      ext4_inode_attach_jinode --> return -ENOMEM
    iput(inode) --> free inode<12>
   --- loop2: last_orphan is still 12 ---
    list_add(&EXT4_I(inode)->i_orphan, &EXT4_SB(sb)->s_orphan);
    // use inode<12> and trigger UAF

To solve this issue, we need to propagate the return value of
ext4_inode_attach_jinode() appropriately.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221102080633.1630225-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: ext4: initialize fsdata in pagecache_write()

commit 956510c0c7439e90b8103aaeaf4da92878c622f0 upstream.

When aops->write_begin() does not initialize fsdata, KMSAN reports
an error passing the latter to aops->write_end().

Fix this by unconditionally initializing fsdata.

Cc: Eric Biggers <ebiggers@kernel.org>
Fixes: c93d8f885809 ("ext4: add basic fs-verity support")
Reported-by: syzbot+9767be679ef5016b6082@syzkaller.appspotmail.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221121112134.407362-1-glider@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: remove trailing newline from ext4_msg() message

commit 78742d4d056df7d2fad241c90185d281bf924844 upstream.

The ext4_msg() function adds a new line to the message.  Remove extra '\n'
from call to ext4_msg() in ext4_orphan_cleanup().

Signed-off-by: Luís Henriques <lhenriques@suse.de>
Link: https://lore.kernel.org/r/20221011155758.15287-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: add inode table check in __ext4_get_inode_loc to aovid possible infinite loop

commit eee22187b53611e173161e38f61de1c7ecbeb876 upstream.

In do_writepages, if the value returned by ext4_writepages is "-ENOMEM"
and "wbc->sync_mode == WB_SYNC_ALL", retry until the condition is not met.

In __ext4_get_inode_loc, if the bh returned by sb_getblk is NULL,
the function returns -ENOMEM.

In __getblk_slow, if the return value of grow_buffers is less than 0,
the function returns NULL.

When the three processes are connected in series like the following stack,
an infinite loop may occur:

do_writepages <--- keep retrying
 ext4_writepages
  mpage_map_and_submit_extent
   mpage_map_one_extent
    ext4_map_blocks
     ext4_ext_map_blocks
      ext4_ext_handle_unwritten_extents
       ext4_ext_convert_to_initialized
        ext4_split_extent
         ext4_split_extent_at
          __ext4_ext_dirty
           __ext4_mark_inode_dirty
            ext4_reserve_inode_write
             ext4_get_inode_loc
              __ext4_get_inode_loc <--- return -ENOMEM
               sb_getblk
                __getblk_gfp
                 __getblk_slow <--- return NULL
                  grow_buffers
                   grow_dev_page <--- return -ENXIO
                    ret = (block < end_block) ? 1 : -ENXIO;

In this issue, bg_inode_table_hi is overwritten as an incorrect value.
As a result, `block < end_block` cannot be met in grow_dev_page.
Therefore, __ext4_get_inode_loc always returns '-ENOMEM' and do_writepages
keeps retrying. As a result, the writeback process is in the D state due
to an infinite loop.

Add a check on inode table block in the __ext4_get_inode_loc function by
referring to ext4_read_inode_bitmap to avoid this infinite loop.

Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220817132701.3015912-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: silence the warning when evicting inode with dioread_nolock

commit bc12ac98ea2e1b70adc6478c8b473a0003b659d3 upstream.

When evicting an inode with default dioread_nolock, it could be raced by
the unwritten extents converting kworker after writeback some new
allocated dirty blocks. It convert unwritten extents to written, the
extents could be merged to upper level and free extent blocks, so it
could mark the inode dirty again even this inode has been marked
I_FREEING. But the inode->i_io_list check and warning in
ext4_evict_inode() missing this corner case. Fortunately,
ext4_evict_inode() will wait all extents converting finished before this
check, so it will not lead to inode use-after-free problem, every thing
is OK besides this warning. The WARN_ON_ONCE was originally designed
for finding inode use-after-free issues in advance, but if we add
current dioread_nolock case in, it will become not quite useful, so fix
this warning by just remove this check.

 ======
 WARNING: CPU: 7 PID: 1092 at fs/ext4/inode.c:227
 ext4_evict_inode+0x875/0xc60
 ...
 RIP: 0010:ext4_evict_inode+0x875/0xc60
 ...
 Call Trace:
  <TASK>
  evict+0x11c/0x2b0
  iput+0x236/0x3a0
  do_unlinkat+0x1b4/0x490
  __x64_sys_unlinkat+0x4c/0xb0
  do_syscall_64+0x3b/0x90
  entry_SYSCALL_64_after_hwframe+0x46/0xb0
 RIP: 0033:0x7fa933c1115b
 ======

rm                          kworker
                            ext4_end_io_end()
vfs_unlink()
 ext4_unlink()
                             ext4_convert_unwritten_io_end_vec()
                              ext4_convert_unwritten_extents()
                               ext4_map_blocks()
                                ext4_ext_map_blocks()
                                 ext4_ext_try_to_merge_up()
                                  __mark_inode_dirty()
                                   check !I_FREEING
                                   locked_inode_to_wb_and_lock_list()
 iput()
  iput_final()
   evict()
    ext4_evict_inode()
     truncate_inode_pages_final() //wait release io_end
                                    inode_io_list_move_locked()
                             ext4_release_io_end()
     trigger WARN_ON_ONCE()

Cc: stable@kernel.org
Fixes: ceff86fddae8 ("ext4: Avoid freeing inodes on dirty list")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220629112647.4141034-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ingenic: Fix missing platform_driver_unregister() call in ingenic_drm_init()

commit 47078311b8efebdefd5b3b2f87e2b02b14f49c66 upstream.

A problem about modprobe ingenic-drm failed is triggered with the following
log given:

 [  303.561088] Error: Driver 'ingenic-ipu' is already registered, aborting...
 modprobe: ERROR: could not insert 'ingenic_drm': Device or resource busy

The reason is that ingenic_drm_init() returns platform_driver_register()
directly without checking its return value, if platform_driver_register()
failed, it returns without unregistering ingenic_ipu_driver_ptr, resulting
the ingenic-drm can never be installed later.
A simple call graph is shown as below:

 ingenic_drm_init()
   platform_driver_register() # ingenic_ipu_driver_ptr are registered
   platform_driver_register()
     driver_register()
       bus_add_driver()
         priv = kzalloc(...) # OOM happened
   # return without unregister ingenic_ipu_driver_ptr

Fixing this problem by checking the return value of
platform_driver_register() and do platform_unregister_drivers() if
error happened.

Fixes: fc1acf317b01 ("drm/ingenic: Add support for the IPU")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221104064512.8569-1-yuancan@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/dsi: fix VBT send packet port selection for dual link DSI

commit f9cdf4130671d767071607d0a7568c9bd36a68d0 upstream.

intel_dsi->ports contains bitmask of enabled ports and correspondingly
logic for selecting port for VBT packet sending must use port specific
bitmask when deciding appropriate port.

Fixes: 08c59dde71b7 ("drm/i915/dsi: fix VBT send packet port selection for ICL+")
Cc: stable@vger.kernel.org
Signed-off-by: Mikko Kovanen <mikko.kovanen@aavamobile.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/DBBPR09MB466592B16885D99ABBF2393A91119@DBBPR09MB4665.eurprd09.prod.outlook.com
(cherry picked from commit 8d58bb7991c45f6b60710cc04c9498c6ea96db90)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Validate the box size for the snooped cursor

commit 4cf949c7fafe21e085a4ee386bb2dade9067316e upstream.

Invalid userspace dma surface copies could potentially overflow
the memcpy from the surface to the snooped image leading to crashes.
To fix it the dimensions of the copybox have to be validated
against the expected size of the snooped cursor.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 2ac863719e51 ("vmwgfx: Snoop DMA transfers with non-covering sizes")
Cc: <stable@vger.kernel.org> # v3.2+
Reviewed-by: Michael Banack <banackm@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221026031936.1004280-1-zack@kde.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/connector: send hotplug uevent on connector cleanup

commit 6fdc2d490ea1369d17afd7e6eb66fecc5b7209bc upstream.

A typical DP-MST unplug removes a KMS connector. However care must
be taken to properly synchronize with user-space. The expected
sequence of events is the following:

1. The kernel notices that the DP-MST port is gone.
2. The kernel marks the connector as disconnected, then sends a
   uevent to make user-space re-scan the connector list.
3. User-space notices the connector goes from connected to disconnected,
   disables it.
4. Kernel handles the IOCTL disabling the connector. On success,
   the very last reference to the struct drm_connector is dropped and
   drm_connector_cleanup() is called.
5. The connector is removed from the list, and a uevent is sent to tell
   user-space that the connector disappeared.

The very last step was missing. As a result, user-space thought the
connector still existed and could try to disable it again. Since the
kernel no longer knows about the connector, that would end up with
EINVAL and confused user-space.

Fix this by sending a hotplug uevent from drm_connector_cleanup().

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Jonas Ådahl <jadahl@redhat.com>
Tested-by: Jonas Ådahl <jadahl@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017153150.60675-2-contact@emersion.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

device_cgroup: Roll back to original exceptions after copy failure

commit e68bfbd3b3c3a0ec3cf8c230996ad8cabe90322f upstream.

When add the 'a *:* rwm' entry to devcgroup A's whitelist, at first A's
exceptions will be cleaned and A's behavior is changed to
DEVCG_DEFAULT_ALLOW. Then parent's exceptions will be copyed to A's
whitelist. If copy failure occurs, just return leaving A to grant
permissions to all devices. And A may grant more permissions than
parent.

Backup A's whitelist and recover original exceptions after copy
failure.

Cc: stable@vger.kernel.org
Fixes: 4cef7299b478 ("device_cgroup: add proper checking when changing default behavior")
Signed-off-by: Wang Weiyang <wangweiyang2@huawei.com>
Reviewed-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: led: Fix potential null-ptr-deref in start_task()

commit 41f563ab3c33698bdfc3403c7c2e6c94e73681e4 upstream.

start_task() calls create_singlethread_workqueue() and not checked the
ret value, which may return NULL. And a null-ptr-deref may happen:

start_task()
    create_singlethread_workqueue() # failed, led_wq is NULL
    queue_delayed_work()
        queue_delayed_work_on()
            __queue_delayed_work()  # warning here, but continue
                __queue_work()      # access wq->flags, null-ptr-deref

Check the ret value and return -ENOMEM if it is NULL.

Fixes: 3499495205a6 ("[PARISC] Use work queue in LED/LCD driver instead of tasklet.")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

remoteproc: core: Do pm_relax when in RPROC_OFFLINE state

commit 11c7f9e3131ad14b27a957496088fa488b153a48 upstream.

Make sure that pm_relax() happens even when the remoteproc
is stopped before the crash handler work is scheduled.

Signed-off-by: Maria Yu <quic_aiquny@quicinc.com>
Cc: stable <stable@vger.kernel.org>
Fixes: a781e5aa5911 ("remoteproc: core: Prevent system suspend during remoteproc recovery")
Link: https://lore.kernel.org/r/20221206015957.2616-2-quic_aiquny@quicinc.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/amd: Fix ivrs_acpihid cmdline parsing code

commit 5f18e9f8868c6d4eae71678e7ebd4977b7d8c8cf upstream.

The second (UID) strcmp in acpi_dev_hid_uid_match considers
"0" and "00" different, which can prevent device registration.

Have the AMD IOMMU driver's ivrs_acpihid parsing code remove
any leading zeroes to make the UID strcmp succeed.  Now users
can safely specify "AMDxxxxx:00" or "AMDxxxxx:0" and expect
the same behaviour.

Fixes: ca3bf5d47cec ("iommu/amd: Introduces ivrs_acpihid kernel parameter")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: stable@vger.kernel.org
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220919155638.391481-1-kim.phillips@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: qcom-qmp-combo: fix sc8180x reset

commit 910dd4883d757af5faac92590f33f0f7da963032 upstream.

The SC8180X has two resets but the DP configuration erroneously
described only one.

In case the DP part of the PHY is initialised before the USB part (e.g.
depending on probe order), then only the first reset would be asserted.

Fixes: 1633802cd4ac ("phy: qcom: qmp: Add SC8180x USB/DP combo")
Cc: stable@vger.kernel.org # 5.15
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221114081346.5116-4-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver core: Fix bus_type.match() error handling in __driver_attach()

commit 27c0d217340e47ec995557f61423ef415afba987 upstream.

When a driver registers with a bus, it will attempt to match with every
device on the bus through the __driver_attach() function. Currently, if
the bus_type.match() function encounters an error that is not
-EPROBE_DEFER, __driver_attach() will return a negative error code, which
causes the driver registration logic to stop trying to match with the
remaining devices on the bus.

This behavior is not correct; a failure while matching a driver to a
device does not mean that the driver won't be able to match and bind
with other devices on the bus. Update the logic in __driver_attach()
to reflect this.

Fixes: 656b8035b0ee ("ARM: 8524/1: driver cohandle -EPROBE_DEFER from bus_type.match()")
Cc: stable@vger.kernel.org
Cc: Saravana Kannan <saravanak@google.com>
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Link: https://lore.kernel.org/r/20220921001414.4046492-1-isaacmanjarres@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: ccp - Add support for TEE for PCI ID 0x14CA

commit 10da230a4df1dfe32a58eb09246f5ffe82346f27 upstream.

SoCs containing 0x14CA are present both in datacenter parts that
support SEV as well as client parts that support TEE.

Cc: stable@vger.kernel.org # 5.15+
Tested-by: Rijo-john Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: n2 - add missing hash statesize

commit 76a4e874593543a2dff91d249c95bac728df2774 upstream.

Add missing statesize to hash templates.
This is mandatory otherwise no algorithms can be registered as the core
requires statesize to be set.

CC: stable@kernel.org # 4.3+
Reported-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Fixes: 0a625fd2abaa ("crypto: n2 - Add Niagara2 crypto driver")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: mm: notify remote harts about mmu cache updates

commit 4bd1d80efb5af640f99157f39b50fb11326ce641 upstream.

Current implementation of update_mmu_cache function performs local TLB
flush. It does not take into account ASID information. Besides, it does
not take into account other harts currently running the same mm context
or possible migration of the running context to other harts. Meanwhile
TLB flush is not performed for every context switch if ASID support
is enabled.

Patch [1] proposed to add ASID support to update_mmu_cache to avoid
flushing local TLB entirely. This patch takes into account other
harts currently running the same mm context as well as possible
migration of this context to other harts.

For this purpose the approach from flush_icache_mm is reused. Remote
harts currently running the same mm context are informed via SBI calls
that they need to flush their local TLBs. All the other harts are marked
as needing a deferred TLB flush when this mm context runs on them.

[1] https://lore.kernel.org/linux-riscv/20220821013926.8968-1-tjytimi@163.com/

Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Fixes: 65d4b9c53017 ("RISC-V: Implement ASID allocator")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-riscv/20220829205219.283543-1-geomatsi@gmail.com/#t
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: stacktrace: Fixup ftrace_graph_ret_addr retp argument

commit 5c3022e4a616d800cf5f4c3a981d7992179e44a1 upstream.

The 'retp' is a pointer to the return address on the stack, so we
must pass the current return address pointer as the 'retp'
argument to ftrace_push_return_trace(). Not parent function's
return address on the stack.

Fixes: b785ec129bd9 ("riscv/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20221109064937.3643993-2-guoren@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/sysfs: Fix double free in error path

commit aa382ffa705bea9931ec92b6f3c70e1fdb372195 upstream.

When pci_create_attr() fails, pci_remove_resource_files() is called which
will iterate over the res_attr[_wc] arrays and frees every non NULL entry.
To avoid a double free here set the array entry only after it's clear we
successfully initialized it.

Fixes: b562ec8f74e4 ("PCI: Don't leak memory if sysfs_create_bin_file() fails")
Link: https://lore.kernel.org/r/20221007070735.GX986@pengutronix.de/
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Fix pci_device_is_present() for VFs by checking PF

commit 98b04dd0b4577894520493d96bc4623387767445 upstream.

pci_device_is_present() previously didn't work for VFs because it reads the
Vendor and Device ID, which are 0xffff for VFs, which looks like they
aren't present.  Check the PF instead.

Wei Gong reported that if virtio I/O is in progress when the driver is
unbound or "0" is written to /sys/.../sriov_numvfs, the virtio I/O
operation hangs, which may result in output like this:

  task:bash state:D stack:    0 pid: 1773 ppid:  1241 flags:0x00004002
  Call Trace:
   schedule+0x4f/0xc0
   blk_mq_freeze_queue_wait+0x69/0xa0
   blk_mq_freeze_queue+0x1b/0x20
   blk_cleanup_queue+0x3d/0xd0
   virtblk_remove+0x3c/0xb0 [virtio_blk]
   virtio_dev_remove+0x4b/0x80
   ...
   device_unregister+0x1b/0x60
   unregister_virtio_device+0x18/0x30
   virtio_pci_remove+0x41/0x80
   pci_device_remove+0x3e/0xb0

This happened because pci_device_is_present(VF) returned "false" in
virtio_pci_remove(), so it called virtio_break_device().  The broken vq
meant that vring_interrupt() skipped the vq.callback() that would have
completed the virtio I/O operation via virtblk_done().

[bhelgaas: commit log, simplify to always use pci_physfn(), add stable tag]
Link: https://lore.kernel.org/r/20221026060912.173250-1-mst@redhat.com
Reported-by: Wei Gong <gongwei833x@gmail.com>
Tested-by: Wei Gong <gongwei833x@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi: fix use after free in _ipmi_destroy_user()

commit a92ce570c81dc0feaeb12a429b4bc65686d17967 upstream.

The intf_free() function frees the "intf" pointer so we cannot
dereference it again on the next line.

Fixes: cbb79863fc31 ("ipmi: Don't allow device module unload when in use")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Message-Id: <Y3M8xa1drZv4CToE@kili>
Cc: <stable@vger.kernel.org> # 5.5+
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ima: Fix a potential NULL pointer access in ima_restore_measurement_list

commit 11220db412edae8dba58853238f53258268bdb88 upstream.

In restore_template_fmt, when kstrdup fails, a non-NULL value will still be
returned, which causes a NULL pointer access in template_desc_init_fields.

Fixes: c7d09367702e ("ima: support restoring multiple template formats")
Cc: stable@kernel.org
Co-developed-by: Jiaming Li <lijiaming30@huawei.com>
Signed-off-by: Jiaming Li <lijiaming30@huawei.com>
Signed-off-by: Huaxin Lu <luhuaxin1@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: spi-nor: Check for zero erase size in spi_nor_find_best_erase_type()

commit 2ebc336be08160debfe27f87660cf550d710f3e9 upstream.

Erase can be zeroed in spi_nor_parse_4bait() or
spi_nor_init_non_uniform_erase_map(). In practice it happened with
mt25qu256a, which supports 4K, 32K, 64K erases with 3b address commands,
but only 4K and 64K erase with 4b address commands.

Fixes: dc92843159a7 ("mtd: spi-nor: fix erase_type array to indicate current map conf")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211119081412.29732-1-alexander.sverdlin@nokia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi: fix long wait in unload when IPMI disconnect

commit f6f1234d98cce69578bfac79df147a1f6660596c upstream.

When fixing the problem mentioned in PATCH1, we also found
the following problem:

If the IPMI is disconnected and in the sending process, the
uninstallation driver will be stuck for a long time.

The main problem is that uninstalling the driver waits for curr_msg to
be sent or HOSED. After stopping tasklet, the only place to trigger the
timeout mechanism is the circular poll in shutdown_smi.

The poll function delays 10us and calls smi_event_handler(smi_info,10).
Smi_event_handler deducts 10us from kcs->ibf_timeout.

But the poll func is followed by schedule_timeout_uninterruptible(1).
The time consumed here is not counted in kcs->ibf_timeout.

So when 10us is deducted from kcs->ibf_timeout, at least 1 jiffies has
actually passed. The waiting time has increased by more than a
hundredfold.

Now instead of calling poll(). call smi_event_handler() directly and
calculate the elapsed time.

For verification, you can directly use ebpf to check the kcs->
ibf_timeout for each call to kcs_event() when IPMI is disconnected.
Decrement at normal rate before unloading. The decrement rate becomes
very slow after unloading.

  $ bpftrace -e 'kprobe:kcs_event {printf("kcs->ibftimeout : %d\n",
      *(arg0+584));}'

Signed-off-by: Zhang Yuchen <zhangyuchen.lcr@bytedance.com>
Message-Id: <20221007092617.87597-3-zhangyuchen.lcr@bytedance.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipu3-imgu: Fix NULL pointer dereference in imgu_subdev_set_selection()

commit dc608edf7d45ba0c2ad14c06eccd66474fec7847 upstream.

Calling v4l2_subdev_get_try_crop() and v4l2_subdev_get_try_compose()
with a subdev state of NULL leads to a NULL pointer dereference. This
can currently happen in imgu_subdev_set_selection() when the state
passed in is NULL, as this method first gets pointers to both the "try"
and "active" states and only then decides which to use.

The same issue has been addressed for imgu_subdev_get_selection() with
commit 30d03a0de650 ("ipu3-imgu: Fix NULL pointer dereference in active
selection access"). However the issue still persists in
imgu_subdev_set_selection().

Therefore, apply a similar fix as done in the aforementioned commit to
imgu_subdev_set_selection(). To keep things a bit cleaner, introduce
helper functions for "crop" and "compose" access and use them in both
imgu_subdev_set_selection() and imgu_subdev_get_selection().

Fixes: 0d346d2a6f54 ("media: v4l2-subdev: add subdev-wide state struct")
Cc: stable@vger.kernel.org # for v5.14 and later
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: jz4740-i2s: Handle independent FIFO flush bits

commit 8b3a9ad86239f80ed569e23c3954a311f66481d6 upstream.

On the JZ4740, there is a single bit that flushes (empties) both
the transmit and receive FIFO. Later SoCs have independent flush
bits for each FIFO.

Independent FIFOs can be flushed before the snd_soc_dai_active()
check because it won't disturb other active streams. This ensures
that the FIFO we're about to use is always flushed before starting
up. With shared FIFOs we can't do that because if another substream
is active, flushing its FIFO would cause underrun errors.

This also fixes a bug: since we were only setting the JZ4740's
flush bit, which corresponds to the TX FIFO flush bit on other
SoCs, other SoCs were not having their RX FIFO flushed at all.

Fixes: 967beb2e8777 ("ASoC: jz4740: Add jz4780 support")
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Cc: stable@vger.kernel.org
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20221023143328.160866-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: wilc1000: sdio: fix module autoloading

commit 57d545b5a3d6ce3a8fb6b093f02bfcbb908973f3 upstream.

There are no SDIO module aliases included in the driver, therefore,
module autoloading isn't working. Add the proper MODULE_DEVICE_TABLE().

Cc: stable@vger.kernel.org
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221027171221.491937-1-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi: Add iMac Pro 2017 to uefi skip cert quirk

commit 0be56a116220f9e5731a6609e66a11accfe8d8e2 upstream.

The iMac Pro 2017 is also a T2 Mac. Thus add it to the list of uefi skip
cert.

Cc: stable@vger.kernel.org
Fixes: 155ca952c7ca ("efi: Do not import certificates from UEFI Secure Boot for T2 Macs")
Link: https://lore.kernel.org/linux-integrity/9D46D92F-1381-4F10-989C-1A12CD2FFDD8@live.com/
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/bitmap: Fix bitmap chunk size overflow issues

commit 4555211190798b6b6fa2c37667d175bf67945c78 upstream.

- limit bitmap chunk size internal u64 variable to values not overflowing
  the u32 bitmap superblock structure variable stored on persistent media
- assign bitmap chunk size internal u64 variable from unsigned values to
  avoid possible sign extension artifacts when assigning from a s32 value

The bug has been there since at least kernel 4.0.
Steps to reproduce it:
1: mdadm -C /dev/mdx -l 1 --bitmap=internal --bitmap-chunk=256M -e 1.2
-n2 /dev/rnbd1 /dev/rnbd2
2 resize member device rnbd1 and rnbd2 to 8 TB
3 mdadm --grow /dev/mdx --size=max

The bitmap_chunksize will overflow without patch.

Cc: stable@vger.kernel.org
Signed-off-by: Florian-Ewald Mueller <florian-ewald.mueller@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: mq-deadline: Do not break sequential write streams to zoned HDDs

commit 015d02f48537cf2d1a65eeac50717566f9db6eec upstream.

mq-deadline ensures an in order dispatching of write requests to zoned
block devices using a per zone lock (a bit). This implies that for any
purely sequential write workload, the drive is exercised most of the
time at a maximum queue depth of one.

However, when such sequential write workload crosses a zone boundary
(when sequentially writing multiple contiguous zones), zone write
locking may prevent the last write to one zone to be issued (as the
previous write is still being executed) but allow the first write to the
following zone to be issued (as that zone is not yet being writen and
not locked). This result in an out of order delivery of the sequential
write commands to the device every time a zone boundary is crossed.

While such behavior does not break the sequential write constraint of
zoned block devices (and does not generate any write error), some zoned
hard-disks react badly to seeing these out of order writes, resulting in
lower write throughput.

This problem can be addressed by always dispatching the first request
of a stream of sequential write requests, regardless of the zones
targeted by these sequential writes. To do so, the function
deadline_skip_seq_writes() is introduced and used in
deadline_next_request() to select the next write command to issue if the
target device is an HDD (blk_queue_nonrot() being false).
deadline_fifo_request() is modified using the new
deadline_earlier_request() and deadline_is_seq_write() helpers to ignore
requests in the fifo list that have a preceding request in lba order
that is sequential.

With this fix, a sequential write workload executed with the following
fio command:

fio  --name=seq-write --filename=/dev/sda --zonemode=zbd --direct=1 \
     --size=68719476736  --ioengine=libaio --iodepth=32 --rw=write \
     --bs=65536

results in an increase from 225 MB/s to 250 MB/s of the write throughput
of an SMR HDD (11% increase).

Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20221124021208.242541-3-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: ds1347: fix value written to century register

commit 4dfe05bdc1ade79b943d4979a2e2a8b5ef68fbb5 upstream.

In `ds1347_set_time()`, the wrong value is being written to the
`DS1347_CENTURY_REG` register.  It needs to be converted to BCD.  Fix
it.

Fixes: 147dae76dbb9 ("rtc: ds1347: handle century register")
Cc: <stable@vger.kernel.org> # v5.5+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20221027163249.447416-1-abbotti@mev.co.uk
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix missing display of three mount options

commit 2bfd81043e944af0e52835ef6d9b41795af22341 upstream.

Three mount options: "tcpnodelay" and "noautotune" and "noblocksend"
were not displayed when passed in on cifs/smb3 mounts (e.g. displayed
in /proc/mounts e.g.).  No change to defaults so these are not
displayed if not specified on mount.

Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix confusing debug message

commit a85ceafd41927e41a4103d228a993df7edd8823b upstream.

Since rc was initialised to -ENOMEM in cifs_get_smb_ses(), when an
existing smb session was found, free_xid() would be called and then
print

  CIFS: fs/cifs/connect.c: Existing tcp session with server found
  CIFS: fs/cifs/connect.c: VFS: in cifs_get_smb_ses as Xid: 44 with uid: 0
  CIFS: fs/cifs/connect.c: Existing smb sess found (status=1)
  CIFS: fs/cifs/connect.c: VFS: leaving cifs_get_smb_ses (xid = 44) rc = -12

Fix this by initialising rc to 0 and then let free_xid() print this
instead

  CIFS: fs/cifs/connect.c: Existing tcp session with server found
  CIFS: fs/cifs/connect.c: VFS: in cifs_get_smb_ses as Xid: 14 with uid: 0
  CIFS: fs/cifs/connect.c: Existing smb sess found (status=1)
  CIFS: fs/cifs/connect.c: VFS: leaving cifs_get_smb_ses (xid = 14) rc = 0

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: dvb-core: Fix UAF due to refcount races at releasing

commit fd3d91ab1c6ab0628fe642dd570b56302c30a792 upstream.

The dvb-core tries to sync the releases of opened files at
dvb_dmxdev_release() with two refcounts: dvbdev->users and
dvr_dvbdev->users.  A problem is present in those two syncs: when yet
another dvb_demux_open() is called during those sync waits,
dvb_demux_open() continues to process even if the device is being
closed.  This includes the increment of the former refcount, resulting
in the leftover refcount after the sync of the latter refcount at
dvb_dmxdev_release().  It ends up with use-after-free, since the
function believes that all usages were gone and releases the
resources.

This patch addresses the problem by adding the check of dmxdev->exit
flag at dvb_demux_open(), just like dvb_dvr_open() already does.  With
the exit flag check, the second call of dvb_demux_open() fails, hence
the further corruption can be avoided.

Also for avoiding the races of the dmxdev->exit flag reference, this
patch serializes the dmxdev->exit set up and the sync waits with the
dmxdev->mutex lock at dvb_dmxdev_release().  Without the mutex lock,
dvb_demux_open() (or dvb_dvr_open()) may run concurrently with
dvb_dmxdev_release(), which allows to skip the exit flag check and
continue the open process that is being closed.

CVE-2022-41218 is assigned to those bugs above.

Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/20220908132754.30532-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: dvb-core: Fix double free in dvb_register_device()

commit 6b0d0477fce747d4137aa65856318b55fba72198 upstream.

In function dvb_register_device() -> dvb_register_media_device() ->
dvb_create_media_entity(), dvb->entity is allocated and initialized. If
the initialization fails, it frees the dvb->entity, and return an error
code. The caller takes the error code and handles the error by calling
dvb_media_device_free(), which unregisters the entity and frees the
field again if it is not NULL. As dvb->entity may not NULLed in
dvb_create_media_entity() when the allocation of dvbdev->pad fails, a
double free may occur. This may also cause an Use After free in
media_device_unregister_entity().

Fix this by storing NULL to dvb->entity when it is freed.

Link: https://lore.kernel.org/linux-media/20220426052921.2088416-1-keitasuzuki.park@sslab.ics.keio.ac.jp
Fixes: fcd5ce4b3936 ("media: dvb-core: fix a memory leak bug")
Cc: stable@vger.kernel.org
Cc: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 9256/1: NWFPE: avoid compiler-generated __aeabi_uldivmod

commit 3220022038b9a3845eea762af85f1c5694b9f861 upstream.

clang-15's ability to elide loops completely became more aggressive when
it can deduce how a variable is being updated in a loop. Counting down
one variable by an increment of another can be replaced by a modulo
operation.

For 64b variables on 32b ARM EABI targets, this can result in the
compiler generating calls to __aeabi_uldivmod, which it does for a do
while loop in float64_rem().

For the kernel, we'd generally prefer that developers not open code 64b
division via binary / operators and instead use the more explicit
helpers from div64.h. On arm-linux-gnuabi targets, failure to do so can
result in linkage failures due to undefined references to
__aeabi_uldivmod().

While developers can avoid open coding divisions on 64b variables, the
compiler doesn't know that the Linux kernel has a partial implementation
of a compiler runtime (--rtlib) to enforce this convention.

It's also undecidable for the compiler whether the code in question
would be faster to execute the loop vs elide it and do the 64b division.

While I actively avoid using the internal -mllvm command line flags, I
think we get better code than using barrier() here, which will force
reloads+spills in the loop for all toolchains.

Link: https://github.com/ClangBuiltLinux/linux/issues/1666
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: tegra-video: fix device_node use after free

commit c4d344163c3a7f90712525f931a6c016bbb35e18 upstream.

At probe time this code path is followed:

 * tegra_csi_init
   * tegra_csi_channels_alloc
     * for_each_child_of_node(node, channel) -- iterates over channels
       * automatically gets 'channel'
         * tegra_csi_channel_alloc()
           * saves into chan->of_node a pointer to the channel OF node
       * automatically gets and puts 'channel'
       * now the node saved in chan->of_node has refcount 0, can disappear
   * tegra_csi_channels_init
     * iterates over channels
       * tegra_csi_channel_init -- uses chan->of_node

After that, chan->of_node keeps storing the node until the device is
removed.

of_node_get() the node and of_node_put() it during teardown to avoid any
risk.

Fixes: 1ebaeb09830f ("media: tegra-video: Add support for external sensor capture")
Cc: stable@vger.kernel.org
Cc: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: tegra-video: fix chan->mipi value on error

commit 10b5ce6743c839fa75336042c64e2479caec9430 upstream.

chan->mipi takes the return value of tegra_mipi_request() which can be a
valid pointer or an error. However chan->mipi is checked in several places,
including error-cleanup code in tegra_csi_channels_cleanup(), as 'if
(chan->mipi)', which suggests the initial intent was that chan->mipi should
be either NULL or a valid pointer, never an error. As a consequence,
cleanup code in case of tegra_mipi_request() errors would dereference an
invalid pointer.

Fix by ensuring chan->mipi always contains either NULL or a void pointer.

Also add that to the documentation.

Fixes: 523c857e34ce ("media: tegra-video: Add CSI MIPI pads calibration")
Cc: stable@vger.kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix infinite loop in tracing_read_pipe on overflowed print_trace_line

commit c1ac03af6ed45d05786c219d102f37eb44880f28 upstream.

print_trace_line may overflow seq_file buffer. If the event is not
consumed, the while loop keeps peeking this event, causing a infinite loop.

Link: https://lkml.kernel.org/r/20221129113009.182425-1-yangjihong1@huawei.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 088b1e427dbba ("ftrace: pipe fixes")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/probes: Handle system names with hyphens

commit 575b76cb885532aae13a9d979fd476bb2b156cb9 upstream.

When creating probe names, a check is done to make sure it matches basic C
standard variable naming standards. Basically, starts with alphabetic or
underline, and then the rest of the characters have alpha-numeric or
underline in them.

But system names do not have any true naming conventions, as they are
created by the TRACE_SYSTEM macro and nothing tests to see what they are.
The "xhci-hcd" trace events has a '-' in the system name. When trying to
attach a eprobe to one of these trace points, it fails because the system
name does not follow the variable naming convention because of the
hyphen, and the eprobe checks fail on this.

Allow hyphens in the system name so that eprobes can attach to the
"xhci-hcd" trace events.

Link: https://lore.kernel.org/all/Y3eJ8GiGnEvVd8%2FN@macondo/
Link: https://lore.kernel.org/linux-trace-kernel/20221122122345.160f5077@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 5b7a96220900e ("tracing/probe: Check event/group naming rule at parsing")
Reported-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/hist: Fix wrong return value in parse_action_params()

commit 2cc6a528882d0e0ccbc1bca5f95b8c963cedac54 upstream.

When number of synth fields is more than SYNTH_FIELDS_MAX,
parse_action_params() should return -EINVAL.

Link: https://lore.kernel.org/linux-trace-kernel/20221207034635.2253990-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Fixes: c282a386a397 ("tracing: Add 'onmatch' hist trigger action support")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix complicated dependency of CONFIG_TRACER_MAX_TRACE

commit e25e43a4e5d8cb2323553d8b6a7ba08d2ebab21f upstream.

Both CONFIG_OSNOISE_TRACER and CONFIG_HWLAT_TRACER partially enables the
CONFIG_TRACER_MAX_TRACE code, but that is complicated and has
introduced a bug; It declares tracing_max_lat_fops data structure outside
of #ifdefs, but since it is defined only when CONFIG_TRACER_MAX_TRACE=y
or CONFIG_HWLAT_TRACER=y, if only CONFIG_OSNOISE_TRACER=y, that
declaration comes to a definition(!).

To fix this issue, and do not repeat the similar problem, makes
CONFIG_OSNOISE_TRACER and CONFIG_HWLAT_TRACER enables the
CONFIG_TRACER_MAX_TRACE always. It has there benefits;
- Fix the tracing_max_lat_fops bug
- Simplify the #ifdefs
- CONFIG_TRACER_MAX_TRACE code is fully enabled, or not.

Link: https://lore.kernel.org/linux-trace-kernel/167033628155.4111793.12185405690820208159.stgit@devnote3
Fixes: 424b650f35c7 ("tracing: Fix missing osnoise tracer on max_latency")
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: stable@vger.kernel.org
Reported-by: David Howells <dhowells@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/all/166992525941.1716618.13740663757583361463.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/all/202212052253.VuhZ2ulJ-lkp@intel.com/T/#u
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix race where eprobes can be called before the event

commit d5f30a7da8ea8e6450250275cec5670cee3c4264 upstream.

The flag that tells the event to call its triggers after reading the event
is set for eprobes after the eprobe is enabled. This leads to a race where
the eprobe may be triggered at the beginning of the event where the record
information is NULL. The eprobe then dereferences the NULL record causing
a NULL kernel pointer bug.

Test for a NULL record to keep this from happening.

Link: https://lore.kernel.org/linux-trace-kernel/20221116192552.1066630-1-rafaelmendsr@gmail.com/
Link: https://lore.kernel.org/all/20221117214249.2addbe10@gandalf.local.home/
Cc: stable@vger.kernel.org
Fixes: 7491e2c442781 ("tracing: Add a probe that attaches to trace events")
Reported-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK

commit 63dc6325ff41ee9e570bde705ac34a39c5dbeb44 upstream.

Since the CONFIG_RETHUNK and CONFIG_SLS will use INT3 for stopping
speculative execution after function return, kprobe jump optimization
always fails on the functions with such INT3 inside the function body.
(It already checks the INT3 padding between functions, but not inside
 the function)

To avoid this issue, as same as kprobes, check whether the INT3 comes
from kgdb or not, and if so, stop decoding and make it fail. The other
INT3 will come from CONFIG_RETHUNK/CONFIG_SLS and those can be
treated as a one-byte instruction.

Fixes: e463a09af2f0 ("x86: Add straight-line-speculation mitigation")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/167146051929.1374301.7419382929328081706.stgit@devnote3
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK

commit 1993bf97992df2d560287f3c4120eda57426843d upstream.

Since the CONFIG_RETHUNK and CONFIG_SLS will use INT3 for stopping
speculative execution after RET instruction, kprobes always failes to
check the probed instruction boundary by decoding the function body if
the probed address is after such sequence. (Note that some conditional
code blocks will be placed after function return, if compiler decides
it is not on the hot path.)

This is because kprobes expects kgdb puts the INT3 as a software
breakpoint and it will replace the original instruction.
But these INT3 are not such purpose, it doesn't need to recover the
original instruction.

To avoid this issue, kprobes checks whether the INT3 is owned by
kgdb or not, and if so, stop decoding and make it fail. The other
INT3 will come from CONFIG_RETHUNK/CONFIG_SLS and those can be
treated as a one-byte instruction.

Fixes: e463a09af2f0 ("x86: Add straight-line-speculation mitigation")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/167146051026.1374301.392728975473572291.stgit@devnote3
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace/x86: Add back ftrace_expected for ftrace bug reports

commit fd3dc56253acbe9c641a66d312d8393cd55eb04c upstream.

After someone reported a bug report with a failed modification due to the
expected value not matching what was found, it came to my attention that
the ftrace_expected is no longer set when that happens. This makes for
debugging the issue a bit more difficult.

Set ftrace_expected to the expected code before calling ftrace_bug, so
that it shows what was expected and why it failed.

Link: https://lore.kernel.org/all/CA+wXwBQ-VhK+hpBtYtyZP-NiX4g8fqRRWithFOHQW-0coQ3vLg@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20221209105247.01d4e51d@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 768ae4406a5c ("x86/ftrace: Use text_poke()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/microcode/intel: Do not retry microcode reloading on the APs

commit be1b670f61443aa5d0d01782e9b8ea0ee825d018 upstream.

The retries in load_ucode_intel_ap() were in place to support systems
with mixed steppings. Mixed steppings are no longer supported and there is
only one microcode image at a time. Any retries will simply reattempt to
apply the same image over and over without making progress.

  [ bp: Zap the circumstantial reasoning from the commit message. ]

Fixes: 06b8534cb728 ("x86/microcode: Rework microcode loading")
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221129210832.107850-3-ashok.raj@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Properly expose ENABLE_USR_WAIT_PAUSE control to L1

commit 31de69f4eea77b28a9724b3fa55aae104fc91fc7 upstream.

Set ENABLE_USR_WAIT_PAUSE in KVM's supported VMX MSR configuration if the
feature is supported in hardware and enabled in KVM's base, non-nested
configuration, i.e. expose ENABLE_USR_WAIT_PAUSE to L1 if it's supported.
This fixes a bug where saving/restoring, i.e. migrating, a vCPU will fail
if WAITPKG (the associated CPUID feature) is enabled for the vCPU, and
obviously allows L1 to enable the feature for L2.

KVM already effectively exposes ENABLE_USR_WAIT_PAUSE to L1 by stuffing
the allowed-1 control ina vCPU's virtual MSR_IA32_VMX_PROCBASED_CTLS2 when
updating secondary controls in response to KVM_SET_CPUID(2), but (a) that
depends on flawed code (KVM shouldn't touch VMX MSRs in response to CPUID
updates) and (b) runs afoul of vmx_restore_control_msr()'s restriction
that the guest value must be a strict subset of the supported host value.

Although no past commit explicitly enabled nested support for WAITPKG,
doing so is safe and functionally correct from an architectural
perspective as no additional KVM support is needed to virtualize TPAUSE,
UMONITOR, and UMWAIT for L2 relative to L1, and KVM already forwards
VM-Exits to L1 as necessary (commit bf653b78f960, "KVM: vmx: Introduce
handle_unexpected_vmexit and handle WAITPKG vmexit").

Note, KVM always keeps the hosts MSR_IA32_UMWAIT_CONTROL resident in
hardware, i.e. always runs both L1 and L2 with the host's power management
settings for TPAUSE and UMWAIT.  See commit bf09fb6cba4f ("KVM: VMX: Stop
context switching MSR_IA32_UMWAIT_CONTROL") for more details.

Fixes: e69e72faa3a0 ("KVM: x86: Add support for user wait instructions")
Cc: stable@vger.kernel.org
Reported-by: Aaron Lewis <aaronlewis@google.com>
Reported-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20221213062306.667649-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Inject #GP, not #UD, if "generic" VMXON CR0/CR4 check fails

commit 9cc409325ddd776f6fd6293d5ce93ce1248af6e4 upstream.

Inject #GP for if VMXON is attempting with a CR0/CR4 that fails the
generic "is CRx valid" check, but passes the CR4.VMXE check, and do the
generic checks _after_ handling the post-VMXON VM-Fail.

The CR4.VMXE check, and all other #UD cases, are special pre-conditions
that are enforced prior to pivoting on the current VMX mode, i.e. occur
before interception if VMXON is attempted in VMX non-root mode.

All other CR0/CR4 checks generate #GP and effectively have lower priority
than the post-VMXON check.

Per the SDM:

    IF (register operand) or (CR0.PE = 0) or (CR4.VMXE = 0) or ...
        THEN #UD;
    ELSIF not in VMX operation
        THEN
            IF (CPL > 0) or (in A20M mode) or
            (the values of CR0 and CR4 are not supported in VMX operation)
                THEN #GP(0);
    ELSIF in VMX non-root operation
        THEN VMexit;
    ELSIF CPL > 0
        THEN #GP(0);
    ELSE VMfail("VMXON executed in VMX root operation");
    FI;

which, if re-written without ELSIF, yields:

    IF (register operand) or (CR0.PE = 0) or (CR4.VMXE = 0) or ...
        THEN #UD

    IF in VMX non-root operation
        THEN VMexit;

    IF CPL > 0
        THEN #GP(0)

    IF in VMX operation
        THEN VMfail("VMXON executed in VMX root operation");

    IF (in A20M mode) or
       (the values of CR0 and CR4 are not supported in VMX operation)
                THEN #GP(0);

Note, KVM unconditionally forwards VMXON VM-Exits that occur in L2 to L1,
i.e. there is no need to check the vCPU is not in VMX non-root mode.  Add
a comment to explain why unconditionally forwarding such exits is
functionally correct.

Reported-by: Eric Li <ercli@ucdavis.edu>
Fixes: c7d855c2aff2 ("KVM: nVMX: Inject #UD if VMXON is attempted with incompatible CR0/CR4")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20221006001956.329314-1-seanjc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: Resume guest immediately when injecting #GP on ECREATE

commit eb3992e833d3a17f9b0a3e0371d0b1d3d566f740 upstream.

Resume the guest immediately when injecting a #GP on ECREATE due to an
invalid enclave size, i.e. don't attempt ECREATE in the host.  The #GP is
a terminal fault, e.g. skipping the instruction if ECREATE is successful
would result in KVM injecting #GP on the instruction following ECREATE.

Fixes: 70210c044b4e ("KVM: VMX: Add SGX ENCLS[ECREATE] handler to enforce CPUID restrictions")
Cc: stable@vger.kernel.org
Cc: Kai Huang <kai.huang@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20220930233132.1723330-1-seanjc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of/kexec: Fix reading 32-bit "linux,initrd-{start,end}" values

commit e553ad8d7957697385e81034bf76db3b2cb2cf27 upstream.

"linux,initrd-start" and "linux,initrd-end" can be 32-bit values even on
a 64-bit platform. Ideally, the size should be based on
'#address-cells', but that has never been enforced in the kernel's FDT
boot parsing code (early_init_dt_check_for_initrd()). Bootloader
behavior is known to vary. For example, kexec always writes these as
64-bit. The result of incorrectly reading 32-bit values is most likely
the reserved memory for the original initrd will still be reserved
for the new kernel. The original arm64 equivalent of this code failed to
release the initrd reserved memory in *all* cases.

Use of_read_number() to mirror the early_init_dt_check_for_initrd()
code.

Fixes: b30be4dc733e ("of: Add a common kexec FDT setup function")
Cc: stable@vger.kernel.org
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Link: https://lore.kernel.org/r/20221128202440.1411895-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/core: Call LSM hook after copying perf_event_attr

commit 0a041ebca4956292cadfb14a63ace3a9c1dcb0a3 upstream.

It passes the attr struct to the security_perf_event_open() but it's
not initialized yet.

Fixes: da97e18458fb ("perf_event: Add support for LSM and SELinux checks")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20221220223140.4020470-1-namhyung@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/hist: Fix out-of-bound write on 'action_data.var_ref_idx'

commit 82470f7d9044842618c847a7166de2b7458157a7 upstream.

When generate a synthetic event with many params and then create a trace
action for it [1], kernel panic happened [2].

It is because that in trace_action_create() 'data->n_params' is up to
SYNTH_FIELDS_MAX (current value is 64), and array 'data->var_ref_idx'
keeps indices into array 'hist_data->var_refs' for each synthetic event
param, but the length of 'data->var_ref_idx' is TRACING_MAP_VARS_MAX
(current value is 16), so out-of-bound write happened when 'data->n_params'
more than 16. In this case, 'data->match_data.event' is overwritten and
eventually cause the panic.

To solve the issue, adjust the length of 'data->var_ref_idx' to be
SYNTH_FIELDS_MAX and add sanity checks to avoid out-of-bound write.

[1]
 # cd /sys/kernel/tracing/
 # echo "my_synth_event int v1; int v2; int v3; int v4; int v5; int v6;\
int v7; int v8; int v9; int v10; int v11; int v12; int v13; int v14;\
int v15; int v16; int v17; int v18; int v19; int v20; int v21; int v22;\
int v23; int v24; int v25; int v26; int v27; int v28; int v29; int v30;\
int v31; int v32; int v33; int v34; int v35; int v36; int v37; int v38;\
int v39; int v40; int v41; int v42; int v43; int v44; int v45; int v46;\
int v47; int v48; int v49; int v50; int v51; int v52; int v53; int v54;\
int v55; int v56; int v57; int v58; int v59; int v60; int v61; int v62;\
int v63" >> synthetic_events
 # echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="bash"' >> \
events/sched/sched_waking/trigger
 # echo "hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(\
pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\
pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\
pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,pid,\
pid,pid,pid,pid,pid,pid,pid,pid,pid)" >> events/sched/sched_switch/trigger

[2]
BUG: unable to handle page fault for address: ffff91c900000000
PGD 61001067 P4D 61001067 PUD 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 2 PID: 322 Comm: bash Tainted: G        W          6.1.0-rc8+ #229
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:strcmp+0xc/0x30
Code: 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee
c3 cc cc cc cc 0f 1f 00 31 c0 eb 08 48 83 c0 01 84 d2 74 13 <0f> b6 14
07 3a 14 06 74 ef 19 c0 83 c8 01 c3 cc cc cc cc 31 c3
RSP: 0018:ffff9b3b00f53c48 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffffffffba958a68 RCX: 0000000000000000
RDX: 0000000000000010 RSI: ffff91c943d33a90 RDI: ffff91c900000000
RBP: ffff91c900000000 R08: 00000018d604b529 R09: 0000000000000000
R10: ffff91c9483eddb1 R11: ffff91ca483eddab R12: ffff91c946171580
R13: ffff91c9479f0538 R14: ffff91c9457c2848 R15: ffff91c9479f0538
FS:  00007f1d1cfbe740(0000) GS:ffff91c9bdc80000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff91c900000000 CR3: 0000000006316000 CR4: 00000000000006e0
Call Trace:
 <TASK>
 __find_event_file+0x55/0x90
 action_create+0x76c/0x1060
 event_hist_trigger_parse+0x146d/0x2060
 ? event_trigger_write+0x31/0xd0
 trigger_process_regex+0xbb/0x110
 event_trigger_write+0x6b/0xd0
 vfs_write+0xc8/0x3e0
 ? alloc_fd+0xc0/0x160
 ? preempt_count_add+0x4d/0xa0
 ? preempt_count_add+0x70/0xa0
 ksys_write+0x5f/0xe0
 do_syscall_64+0x3b/0x90
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f1d1d0cf077
Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e
fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74
RSP: 002b:00007ffcebb0e568 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000143 RCX: 00007f1d1d0cf077
RDX: 0000000000000143 RSI: 00005639265aa7e0 RDI: 0000000000000001
RBP: 00005639265aa7e0 R08: 000000000000000a R09: 0000000000000142
R10: 000056392639c017 R11: 0000000000000246 R12: 0000000000000143
R13: 00007f1d1d1ae6a0 R14: 00007f1d1d1aa4a0 R15: 00007f1d1d1a98a0
 </TASK>
Modules linked in:
CR2: ffff91c900000000
---[ end trace 0000000000000000 ]---
RIP: 0010:strcmp+0xc/0x30
Code: 75 f7 31 d2 44 0f b6 04 16 44 88 04 11 48 83 c2 01 45 84 c0 75 ee
c3 cc cc cc cc 0f 1f 00 31 c0 eb 08 48 83 c0 01 84 d2 74 13 <0f> b6 14
07 3a 14 06 74 ef 19 c0 83 c8 01 c3 cc cc cc cc 31 c3
RSP: 0018:ffff9b3b00f53c48 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffffffffba958a68 RCX: 0000000000000000
RDX: 0000000000000010 RSI: ffff91c943d33a90 RDI: ffff91c900000000
RBP: ffff91c900000000 R08: 00000018d604b529 R09: 0000000000000000
R10: ffff91c9483eddb1 R11: ffff91ca483eddab R12: ffff91c946171580
R13: ffff91c9479f0538 R14: ffff91c9457c2848 R15: ffff91c9479f0538
FS:  00007f1d1cfbe740(0000) GS:ffff91c9bdc80000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff91c900000000 CR3: 0000000006316000 CR4: 00000000000006e0

Link: https://lore.kernel.org/linux-trace-kernel/20221207035143.2278781-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Fixes: d380dcde9a07 ("tracing: Fix now invalid var_ref_vals assumption in trace action")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache: set needs_check flag after aborting metadata

commit 6b9973861cb2e96dcd0bb0f1baddc5c034207c5c upstream.

Otherwise the commit that will be aborted will be associated with the
metadata objects that will be torn down.  Must write needs_check flag
to metadata with a reset block manager.

Found through code-inspection (and compared against dm-thin.c).

Cc: stable@vger.kernel.org
Fixes: 028ae9f76f29 ("dm cache: add fail io mode and needs_check flag")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache: Fix UAF in destroy()

commit 6a459d8edbdbe7b24db42a5a9f21e6aa9e00c2aa upstream.

Dm_cache also has the same UAF problem when dm_resume()
and dm_destroy() are concurrent.

Therefore, cancelling timer again in destroy().

Cc: stable@vger.kernel.org
Fixes: c6b4fcbad044e ("dm: add cache target")
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm clone: Fix UAF in clone_dtr()

commit e4b5957c6f749a501c464f92792f1c8e26b61a94 upstream.

Dm_clone also has the same UAF problem when dm_resume()
and dm_destroy() are concurrent.

Therefore, cancelling timer again in clone_dtr().

Cc: stable@vger.kernel.org
Fixes: 7431b7835f554 ("dm: add clone target")
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm integrity: Fix UAF in dm_integrity_dtr()

commit f50cb2cbabd6c4a60add93d72451728f86e4791c upstream.

Dm_integrity also has the same UAF problem when dm_resume()
and dm_destroy() are concurrent.

Therefore, cancelling timer again in dm_integrity_dtr().

Cc: stable@vger.kernel.org
Fixes: 7eada909bfd7a ("dm: add integrity target")
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm thin: Fix UAF in run_timer_softirq()

commit 88430ebcbc0ec637b710b947738839848c20feff upstream.

When dm_resume() and dm_destroy() are concurrent, it will
lead to UAF, as follows:

 BUG: KASAN: use-after-free in __run_timers+0x173/0x710
 Write of size 8 at addr ffff88816d9490f0 by task swapper/0/0
<snip>
 Call Trace:
  <IRQ>
  dump_stack_lvl+0x73/0x9f
  print_report.cold+0x132/0xaa2
  _raw_spin_lock_irqsave+0xcd/0x160
  __run_timers+0x173/0x710
  kasan_report+0xad/0x110
  __run_timers+0x173/0x710
  __asan_store8+0x9c/0x140
  __run_timers+0x173/0x710
  call_timer_fn+0x310/0x310
  pvclock_clocksource_read+0xfa/0x250
  kvm_clock_read+0x2c/0x70
  kvm_clock_get_cycles+0xd/0x20
  ktime_get+0x5c/0x110
  lapic_next_event+0x38/0x50
  clockevents_program_event+0xf1/0x1e0
  run_timer_softirq+0x49/0x90
  __do_softirq+0x16e/0x62c
  __irq_exit_rcu+0x1fa/0x270
  irq_exit_rcu+0x12/0x20
  sysvec_apic_timer_interrupt+0x8e/0xc0

One of the concurrency UAF can be shown as below:

        use                                  free
do_resume                           |
  __find_device_hash_cell           |
    dm_get                          |
      atomic_inc(&md->holders)      |
                                    | dm_destroy
                                    |   __dm_destroy
                                    |     if (!dm_suspended_md(md))
                                    |     atomic_read(&md->holders)
                                    |     msleep(1)
  dm_resume                         |
    __dm_resume                     |
      dm_table_resume_targets       |
        pool_resume                 |
          do_waker  #add delay work |
  dm_put                            |
    atomic_dec(&md->holders)        |
                                    |     dm_table_destroy
                                    |       pool_dtr
                                    |         __pool_dec
                                    |           __pool_destroy
                                    |             destroy_workqueue
                                    |             kfree(pool) # free pool
        time out
__do_softirq
  run_timer_softirq # pool has already been freed

This can be easily reproduced using:
  1. create thin-pool
  2. dmsetup suspend pool
  3. dmsetup resume pool
  4. dmsetup remove_all # Concurrent with 3

The root cause of this UAF bug is that dm_resume() adds timer after
dm_destroy() skips cancelling the timer because of suspend status.
After timeout, it will call run_timer_softirq(), however pool has
already been freed. The concurrency UAF bug will happen.

Therefore, cancelling timer again in __pool_destroy().

Cc: stable@vger.kernel.org
Fixes: 991d9fa02da0d ("dm: add thin provisioning target")
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm thin: resume even if in FAIL mode

commit 19eb1650afeb1aa86151f61900e9e5f1de5d8d02 upstream.

If a thinpool set fail_io while suspending, resume will fail with:
 device-mapper: resume ioctl on vg-thinpool  failed: Invalid argument

The thin-pool also can't be removed if an in-flight bio is in the
deferred list.

This can be easily reproduced using:

  echo "offline" > /sys/block/sda/device/state
  dd if=/dev/zero of=/dev/mapper/thin bs=4K count=1
  dmsetup suspend /dev/mapper/pool
  mkfs.ext4 /dev/mapper/thin
  dmsetup resume /dev/mapper/pool

The root cause is maybe_resize_data_dev() will check fail_io and return
error before called dm_resume.

Fix this by adding FAIL mode check at the end of pool_preresume().

Cc: stable@vger.kernel.org
Fixes: da105ed5fd7e ("dm thin metadata: introduce dm_pool_abort_metadata")
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm thin: Use last transaction's pmd->root when commit failed

commit 7991dbff6849f67e823b7cc0c15e5a90b0549b9f upstream.

Recently we found a softlock up problem in dm thin pool btree lookup
code due to corrupted metadata:

 Kernel panic - not syncing: softlockup: hung tasks
 CPU: 7 PID: 2669225 Comm: kworker/u16:3
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
 Workqueue: dm-thin do_worker [dm_thin_pool]
 Call Trace:
   <IRQ>
   dump_stack+0x9c/0xd3
   panic+0x35d/0x6b9
   watchdog_timer_fn.cold+0x16/0x25
   __run_hrtimer+0xa2/0x2d0
   </IRQ>
   RIP: 0010:__relink_lru+0x102/0x220 [dm_bufio]
   __bufio_new+0x11f/0x4f0 [dm_bufio]
   new_read+0xa3/0x1e0 [dm_bufio]
   dm_bm_read_lock+0x33/0xd0 [dm_persistent_data]
   ro_step+0x63/0x100 [dm_persistent_data]
   btree_lookup_raw.constprop.0+0x44/0x220 [dm_persistent_data]
   dm_btree_lookup+0x16f/0x210 [dm_persistent_data]
   dm_thin_find_block+0x12c/0x210 [dm_thin_pool]
   __process_bio_read_only+0xc5/0x400 [dm_thin_pool]
   process_thin_deferred_bios+0x1a4/0x4a0 [dm_thin_pool]
   process_one_work+0x3c5/0x730

Following process may generate a broken btree mixed with fresh and
stale btree nodes, which could get dm thin trapped in an infinite loop
while looking up data block:
 Transaction 1: pmd->root = A, A->B->C   // One path in btree
                pmd->root = X, X->Y->Z   // Copy-up
 Transaction 2: X,Z is updated on disk, Y write failed.
                // Commit failed, dm thin becomes read-only.
                process_bio_read_only
 dm_thin_find_block
  __find_block
   dm_btree_lookup(pmd->root)
The pmd->root points to a broken btree, Y may contain stale node
pointing to any block, for example X, which gets dm thin trapped into
a dead loop while looking up Z.

Fix this by setting pmd->root in __open_metadata(), so that dm thin
will use the last transaction's pmd->root if commit failed.

Fetch a reproducer in [Link].

Linke: https://bugzilla.kernel.org/show_bug.cgi?id=216790
Cc: stable@vger.kernel.org
Fixes: 991d9fa02da0 ("dm: add thin provisioning target")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm thin: Fix ABBA deadlock between shrink_slab and dm_pool_abort_metadata

commit 8111964f1b8524c4bb56b02cd9c7a37725ea21fd upstream.

Following concurrent processes:

          P1(drop cache)                P2(kworker)
drop_caches_sysctl_handler
 drop_slab
  shrink_slab
   down_read(&shrinker_rwsem)  - LOCK A
   do_shrink_slab
    super_cache_scan
     prune_icache_sb
      dispose_list
       evict
        ext4_evict_inode
 ext4_clear_inode
  ext4_discard_preallocations
   ext4_mb_load_buddy_gfp
    ext4_mb_init_cache
     ext4_read_block_bitmap_nowait
      ext4_read_bh_nowait
       submit_bh
        dm_submit_bio
                 do_worker
  process_deferred_bios
   commit
    metadata_operation_failed
     dm_pool_abort_metadata
      down_write(&pmd->root_lock) - LOCK B
                      __destroy_persistent_data_objects
       dm_block_manager_destroy
        dm_bufio_client_destroy
         unregister_shrinker
  down_write(&shrinker_rwsem)
 thin_map                            |
  dm_thin_find_block                 ↓
   down_read(&pmd->root_lock) --> ABBA deadlock

, which triggers hung task:

[   76.974820] INFO: task kworker/u4:3:63 blocked for more than 15 seconds.
[   76.976019]       Not tainted 6.1.0-rc4-00011-g8f17dd350364-dirty #910
[   76.978521] task:kworker/u4:3    state:D stack:0     pid:63    ppid:2
[   76.978534] Workqueue: dm-thin do_worker
[   76.978552] Call Trace:
[   76.978564]  __schedule+0x6ba/0x10f0
[   76.978582]  schedule+0x9d/0x1e0
[   76.978588]  rwsem_down_write_slowpath+0x587/0xdf0
[   76.978600]  down_write+0xec/0x110
[   76.978607]  unregister_shrinker+0x2c/0xf0
[   76.978616]  dm_bufio_client_destroy+0x116/0x3d0
[   76.978625]  dm_block_manager_destroy+0x19/0x40
[   76.978629]  __destroy_persistent_data_objects+0x5e/0x70
[   76.978636]  dm_pool_abort_metadata+0x8e/0x100
[   76.978643]  metadata_operation_failed+0x86/0x110
[   76.978649]  commit+0x6a/0x230
[   76.978655]  do_worker+0xc6e/0xd90
[   76.978702]  process_one_work+0x269/0x630
[   76.978714]  worker_thread+0x266/0x630
[   76.978730]  kthread+0x151/0x1b0
[   76.978772] INFO: task test.sh:2646 blocked for more than 15 seconds.
[   76.979756]       Not tainted 6.1.0-rc4-00011-g8f17dd350364-dirty #910
[   76.982111] task:test.sh         state:D stack:0     pid:2646  ppid:2459
[   76.982128] Call Trace:
[   76.982139]  __schedule+0x6ba/0x10f0
[   76.982155]  schedule+0x9d/0x1e0
[   76.982159]  rwsem_down_read_slowpath+0x4f4/0x910
[   76.982173]  down_read+0x84/0x170
[   76.982177]  dm_thin_find_block+0x4c/0xd0
[   76.982183]  thin_map+0x201/0x3d0
[   76.982188]  __map_bio+0x5b/0x350
[   76.982195]  dm_submit_bio+0x2b6/0x930
[   76.982202]  __submit_bio+0x123/0x2d0
[   76.982209]  submit_bio_noacct_nocheck+0x101/0x3e0
[   76.982222]  submit_bio_noacct+0x389/0x770
[   76.982227]  submit_bio+0x50/0xc0
[   76.982232]  submit_bh_wbc+0x15e/0x230
[   76.982238]  submit_bh+0x14/0x20
[   76.982241]  ext4_read_bh_nowait+0xc5/0x130
[   76.982247]  ext4_read_block_bitmap_nowait+0x340/0xc60
[   76.982254]  ext4_mb_init_cache+0x1ce/0xdc0
[   76.982259]  ext4_mb_load_buddy_gfp+0x987/0xfa0
[   76.982263]  ext4_discard_preallocations+0x45d/0x830
[   76.982274]  ext4_clear_inode+0x48/0xf0
[   76.982280]  ext4_evict_inode+0xcf/0xc70
[   76.982285]  evict+0x119/0x2b0
[   76.982290]  dispose_list+0x43/0xa0
[   76.982294]  prune_icache_sb+0x64/0x90
[   76.982298]  super_cache_scan+0x155/0x210
[   76.982303]  do_shrink_slab+0x19e/0x4e0
[   76.982310]  shrink_slab+0x2bd/0x450
[   76.982317]  drop_slab+0xcc/0x1a0
[   76.982323]  drop_caches_sysctl_handler+0xb7/0xe0
[   76.982327]  proc_sys_call_handler+0x1bc/0x300
[   76.982331]  proc_sys_write+0x17/0x20
[   76.982334]  vfs_write+0x3d3/0x570
[   76.982342]  ksys_write+0x73/0x160
[   76.982347]  __x64_sys_write+0x1e/0x30
[   76.982352]  do_syscall_64+0x35/0x80
[   76.982357]  entry_SYSCALL_64_after_hwframe+0x63/0xcd

Function metadata_operation_failed() is called when operations failed
on dm pool metadata, dm pool will destroy and recreate metadata. So,
shrinker will be unregistered and registered, which could down write
shrinker_rwsem under pmd_write_lock.

Fix it by allocating dm_block_manager before locking pmd->root_lock
and destroying old dm_block_manager after unlocking pmd->root_lock,
then old dm_block_manager is replaced with new dm_block_manager under
pmd->root_lock. So, shrinker register/unregister could be done without
holding pmd->root_lock.

Fetch a reproducer in [Link].

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216676
Cc: stable@vger.kernel.org #v5.2+
Fixes: e49e582965b3 ("dm thin: add read only and fail io modes")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache: Fix ABBA deadlock between shrink_slab and dm_cache_metadata_abort

commit 352b837a5541690d4f843819028cf2b8be83d424 upstream.

Same ABBA deadlock pattern fixed in commit 4b60f452ec51 ("dm thin: Fix
ABBA deadlock between shrink_slab and dm_pool_abort_metadata") to
DM-cache's metadata.

Reported-by: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: stable@vger.kernel.org
Fixes: 028ae9f76f29 ("dm cache: add fail io mode and needs_check flag")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: remove MPTCP 'ifdef' in TCP SYN cookies

commit 3fff88186f047627bb128d65155f42517f8e448f upstream.

To ease the maintenance, it is often recommended to avoid having #ifdef
preprocessor conditions.

Here the section related to CONFIG_MPTCP was quite short but the next
commit needs to add more code around. It is then cleaner to move
specific MPTCP code to functions located in net/mptcp directory.

Now that mptcp_subflow_request_sock_ops structure can be static, it can
also be marked as "read only after init".

Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: mark ops structures as ro_after_init

commit 51fa7f8ebf0e25c7a9039fa3988a623d5f3855aa upstream.

These structures are initialised from the init hooks, so we can't make
them 'const'.  But no writes occur afterwards, so we can use ro_after_init.

Also, remove bogus EXPORT_SYMBOL, the only access comes from ip
stack, not from kernel modules.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: dlm: retry accept() until -EAGAIN or error returns

commit f0f4bb431bd543ed7bebbaea3ce326cfcd5388bc upstream.

This patch fixes a race if we get two times an socket data ready event
while the listen connection worker is queued. Currently it will be
served only once but we need to do it (in this case twice) until we hit
-EAGAIN which tells us there is no pending accept going on.

This patch wraps an do while loop until we receive a return value which
is different than 0 as it was done before commit d11ccd451b65 ("fs: dlm:
listen socket out of connection hash").

Cc: stable@vger.kernel.org
Fixes: d11ccd451b65 ("fs: dlm: listen socket out of connection hash")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: dlm: fix sock release if listen fails

commit 08ae0547e75ec3d062b6b6b9cf4830c730df68df upstream.

This patch fixes a double sock_release() call when the listen() is
called for the dlm lowcomms listen socket. The caller of
dlm_listen_for_all should never care about releasing the socket if
dlm_listen_for_all() fails, it's done now only once if listen() fails.

Cc: stable@vger.kernel.org
Fixes: 2dc6b1158c28 ("fs: dlm: introduce generic listen")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops

[ Upstream commit a4517c4f3423c7c448f2c359218f97c1173523a1 ]

The Dell Latiture 3340/3440/3540 laptops with Realtek ALC3204 have
dual codecs and need the ALC1220_FIXUP_GB_DUAL_CODECS to fix the
conflicts of Master controls. The existing headset mic fixup for
Dell is also required to enable the jack sense and the headset mic.

Introduce a new fixup to fix the dual codec and headset mic issues
for particular Dell laptops since other old Dell laptops with the
same codec configuration are already well handled by the fixup in
alc269_fallback_pin_fixup_tbl[].

Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221226114303.4027500-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: patch_realtek: Fix Dell Inspiron Plus 16

[ Upstream commit 2912cdda734d9136615ed05636d9fcbca2a7a3c5 ]

The Dell Inspiron Plus 16, in both laptop and 2in1 form factor, has top
speakers connected on NID 0x17, which the codec reports as unconnected.
These speakers should be connected to the DAC on NID 0x03.

Signed-off-by: Philipp Jungkamp <p.jungkamp@gmx.net>
Link: https://lore.kernel.org/r/20221205163713.7476-1-p.jungkamp@gmx.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: a4517c4f3423 ("ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops")
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: Init completion before kobject_init_and_add()

commit 5c51054896bcce1d33d39fead2af73fec24f40b6 upstream.

In cpufreq_policy_alloc(), it will call uninitialed completion in
cpufreq_sysfs_release() when kobject_init_and_add() fails. And
that will cause a crash such as the following page fault in complete:

BUG: unable to handle page fault for address: fffffffffffffff8
[..]
RIP: 0010:complete+0x98/0x1f0
[..]
Call Trace:
 kobject_put+0x1be/0x4c0
 cpufreq_online.cold+0xee/0x1fd
 cpufreq_add_dev+0x183/0x1e0
 subsys_interface_register+0x3f5/0x4e0
 cpufreq_register_driver+0x3b7/0x670
 acpi_cpufreq_init+0x56c/0x1000 [acpi_cpufreq]
 do_one_initcall+0x13d/0x780
 do_init_module+0x1c3/0x630
 load_module+0x6e67/0x73b0
 __do_sys_finit_module+0x181/0x240
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 4ebe36c94aed ("cpufreq: Fix kobject memleak")
Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 5.2+ <stable@vger.kernel.org> # 5.2+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM/devfreq: governor: Add a private governor_data for governor

commit 5fdded8448924e3631d466eea499b11606c43640 upstream.

The member void *data in the structure devfreq can be overwrite
by governor_userspace. For example:
1. The device driver assigned the devfreq governor to simple_ondemand
by the function devfreq_add_device() and init the devfreq member
void *data to a pointer of a static structure devfreq_simple_ondemand_data
by the function devfreq_add_device().
2. The user changed the devfreq governor to userspace by the command
"echo userspace > /sys/class/devfreq/.../governor".
3. The governor userspace alloced a dynamic memory for the struct
userspace_data and assigend the member void *data of devfreq to
this memory by the function userspace_init().
4. The user changed the devfreq governor back to simple_ondemand
by the command "echo simple_ondemand > /sys/class/devfreq/.../governor".
5. The governor userspace exited and assigned the member void *data
in the structure devfreq to NULL by the function userspace_exit().
6. The governor simple_ondemand fetched the static information of
devfreq_simple_ondemand_data in the function
devfreq_simple_ondemand_func() but the member void *data of devfreq was
assigned to NULL by the function userspace_exit().
7. The information of upthreshold and downdifferential is lost
and the governor simple_ondemand can't work correctly.

The member void *data in the structure devfreq is designed for
a static pointer used in a governor and inited by the function
devfreq_add_device(). This patch add an element named governor_data
in the devfreq structure which can be used by a governor(E.g userspace)
who want to assign a private data to do some private things.

Fixes: ce26c5bb9569 ("PM / devfreq: Add basic governors")
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Chanwoo Choi <cwchoi00@gmail.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kant Fan <kant@allwinnertech.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: Use optional USERCFLAGS and USERLDFLAGS

commit de3ee3f63400a23954e7c1ad1cb8c20f29ab6fe3 upstream.

This change enables to extend CFLAGS and LDFLAGS from command line, e.g.
to extend compiler checks: make USERCFLAGS=-Werror USERLDFLAGS=-static

USERCFLAGS and USERLDFLAGS are documented in
Documentation/kbuild/makefiles.rst and Documentation/kbuild/kbuild.rst

This should be backported (down to 5.10) to improve previous kernel
versions testing as well.

Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220909103901.1503436-1-mic@digikod.net
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: sdm850-lenovo-yoga-c630: correct I2C12 pins drive strength

commit fd49776d8f458bba5499384131eddc0b8bcaf50c upstream.

The pin configuration (done with generic pin controller helpers and
as expressed by bindings) requires children nodes with either:
1. "pins" property and the actual configuration,
2. another set of nodes with above point.

The qup_i2c12_default pin configuration used second method - with a
"pinmux" child.

Fixes: 44acee207844 ("arm64: dts: qcom: Add Lenovo Yoga C630")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220930192039.240486-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: ux500: do not directly dereference __iomem

commit 65b0e307a1a9193571db12910f382f84195a3d29 upstream.

Sparse reports that calling add_device_randomness() on `uid` is a
violation of address spaces. And indeed the next usage uses readl()
properly, but that was left out when passing it toadd_device_
randomness(). So instead copy the whole thing to the stack first.

Fixes: 4040d10a3d44 ("ARM: ux500: add DB serial number to entropy pool")
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/202210230819.loF90KDh-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20221108123755.207438-1-Jason@zx2c4.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix resolving backrefs for inline extent followed by prealloc

commit 560840afc3e63bbe5d9c5ef6b2ecf8f3589adff6 upstream.

If a file consists of an inline extent followed by a regular or prealloc
extent, then a legitimate attempt to resolve a logical address in the
non-inline region will result in add_all_parents reading the invalid
offset field of the inline extent. If the inline extent item is placed
in the leaf eb s.t. it is the first item, attempting to access the
offset field will not only be meaningless, it will go past the end of
the eb and cause this panic:

  [17.626048] BTRFS warning (device dm-2): bad eb member end: ptr 0x3fd4 start 30834688 member offset 16377 size 8
  [17.631693] general protection fault, probably for non-canonical address 0x5088000000000: 0000 [#1] SMP PTI
  [17.635041] CPU: 2 PID: 1267 Comm: btrfs Not tainted 5.12.0-07246-g75175d5adc74-dirty #199
  [17.637969] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
  [17.641995] RIP: 0010:btrfs_get_64+0xe7/0x110
  [17.649890] RSP: 0018:ffffc90001f73a08 EFLAGS: 00010202
  [17.651652] RAX: 0000000000000001 RBX: ffff88810c42d000 RCX: 0000000000000000
  [17.653921] RDX: 0005088000000000 RSI: ffffc90001f73a0f RDI: 0000000000000001
  [17.656174] RBP: 0000000000000ff9 R08: 0000000000000007 R09: c0000000fffeffff
  [17.658441] R10: ffffc90001f73790 R11: ffffc90001f73788 R12: ffff888106afe918
  [17.661070] R13: 0000000000003fd4 R14: 0000000000003f6f R15: cdcdcdcdcdcdcdcd
  [17.663617] FS:  00007f64e7627d80(0000) GS:ffff888237c80000(0000) knlGS:0000000000000000
  [17.666525] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [17.668664] CR2: 000055d4a39152e8 CR3: 000000010c596002 CR4: 0000000000770ee0
  [17.671253] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [17.673634] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [17.676034] PKRU: 55555554
  [17.677004] Call Trace:
  [17.677877]  add_all_parents+0x276/0x480
  [17.679325]  find_parent_nodes+0xfae/0x1590
  [17.680771]  btrfs_find_all_leafs+0x5e/0xa0
  [17.682217]  iterate_extent_inodes+0xce/0x260
  [17.683809]  ? btrfs_inode_flags_to_xflags+0x50/0x50
  [17.685597]  ? iterate_inodes_from_logical+0xa1/0xd0
  [17.687404]  iterate_inodes_from_logical+0xa1/0xd0
  [17.689121]  ? btrfs_inode_flags_to_xflags+0x50/0x50
  [17.691010]  btrfs_ioctl_logical_to_ino+0x131/0x190
  [17.692946]  btrfs_ioctl+0x104a/0x2f60
  [17.694384]  ? selinux_file_ioctl+0x182/0x220
  [17.695995]  ? __x64_sys_ioctl+0x84/0xc0
  [17.697394]  __x64_sys_ioctl+0x84/0xc0
  [17.698697]  do_syscall_64+0x33/0x40
  [17.700017]  entry_SYSCALL_64_after_hwframe+0x44/0xae
  [17.701753] RIP: 0033:0x7f64e72761b7
  [17.709355] RSP: 002b:00007ffefb067f58 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  [17.712088] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f64e72761b7
  [17.714667] RDX: 00007ffefb067fb0 RSI: 00000000c0389424 RDI: 0000000000000003
  [17.717386] RBP: 00007ffefb06d188 R08: 000055d4a390d2b0 R09: 00007f64e7340a60
  [17.719938] R10: 0000000000000231 R11: 0000000000000246 R12: 0000000000000001
  [17.722383] R13: 0000000000000000 R14: 00000000c0389424 R15: 000055d4a38fd2a0
  [17.724839] Modules linked in:

Fix the bug by detecting the inline extent item in add_all_parents and
skipping to the next extent item.

CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K

commit ff874dbc4f868af128b412a9bd92637103cf11d7 upstream.

When the clock is less than 400K, some SD cards fail to initialize
because CLK_AUTO is enabled.

Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221207051909.32126-1-wenchao.chen@unisoc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: sdm845-db845c: correct SPI2 pins drive strength

commit 9905370560d9c29adc15f4937c5a0c0dac05f0b4 upstream.

The pin configuration (done with generic pin controller helpers and
as expressed by bindings) requires children nodes with either:
1. "pins" property and the actual configuration,
2. another set of nodes with above point.

The qup_spi2_default pin configuration uses alreaady the second method
with a "pinmux" child, so configure drive-strength similarly in
"pinconf".  Otherwise the PIN drive strength would not be applied.

Fixes: 8d23a0040475 ("arm64: dts: qcom: db845c: add Low speed expansion i2c and spi nodes")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221010114417.29859-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel/uncore: Clear attr_update properly

commit 6532783310e2b2f50dc13f46c49aa6546cb6e7a3 upstream.

Current clear_attr_update procedure in pmu_set_mapping() sets attr_update
field in NULL that is not correct because intel_uncore_type pmu types can
contain several groups in attr_update field. For example, SPR platform
already has uncore_alias_group to update and then UPI topology group will
be added in next patches.

Fix current behavior and clear attr_update group related to mapping only.

Fixes: bb42b3d39781 ("perf/x86/intel/uncore: Expose an Uncore unit to IIO PMON mapping")
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221117122833.3103580-4-alexander.antonov@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/intel/uncore: Disable I/O stacks to PMU mapping on ICX-D

commit efe062705d149b20a15498cb999a9edbb8241e6f upstream.

Current implementation of I/O stacks to PMU mapping doesn't support ICX-D.
Detect ICX-D system to disable mapping.

Fixes: 10337e95e04c ("perf/x86/intel/uncore: Enable I/O stacks to IIO PMON mapping on ICX")
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221117122833.3103580-5-alexander.antonov@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: use the correct print format

commit d87a7b4c77a997d5388566dd511ca8e6b8e8a0a8 upstream.

The print format error was found when using ftrace event:
    <...>-1406 [000] .... 23599442.895823: jbd2_end_commit: dev 252,8 transaction -1866216965 sync 0 head -1866217368
    <...>-1406 [000] .... 23599442.896299: jbd2_start_commit: dev 252,8 transaction -1866216964 sync 0

Use the correct print format for transaction, head and tid.

Fixes: 879c5e6b7cb4 ('jbd2: convert instrumentation from markers to tracepoints')
Signed-off-by: Bixuan Cui <cuibixuan@linux.alibaba.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/1665488024-95172-1-git-send-email-cuibixuan@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ktest.pl minconfig: Unset configs instead of just removing them

commit ef784eebb56425eed6e9b16e7d47e5c00dcf9c38 upstream.

After a full run of a make_min_config test, I noticed there were a lot of
CONFIGs still enabled that really should not be. Looking at them, I
noticed they were all defined as "default y". The issue is that the test
simple removes the config and re-runs make oldconfig, which enables it
again because it is set to default 'y'. Instead, explicitly disable the
config with writing "# CONFIG_FOO is not set" to the file to keep it from
being set again.

With this change, one of my box's minconfigs went from 768 configs set,
down to 521 configs set.

Link: https://lkml.kernel.org/r/20221202115936.016fce23@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 0a05c769a9de5 ("ktest: Added config_bisect test type")
Reviewed-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kest.pl: Fix grub2 menu handling for rebooting

commit 26df05a8c1420ad3de314fdd407e7fc2058cc7aa upstream.

grub2 has submenus where to use grub-reboot, it requires:

  grub-reboot X>Y

where X is the main index and Y is the submenu. Thus if you have:

menuentry 'Debian GNU/Linux' --class debian --class gnu-linux ...
[...]
}
submenu 'Advanced options for Debian GNU/Linux' $menuentry_id_option ...
        menuentry 'Debian GNU/Linux, with Linux 6.0.0-4-amd64' --class debian --class gnu-linux ...
                [...]
        }
        menuentry 'Debian GNU/Linux, with Linux 6.0.0-4-amd64 (recovery mode)' --class debian --class gnu-linux ...
[...]
        }
        menuentry 'Debian GNU/Linux, with Linux test' --class debian --class gnu-linux ...
                [...]
        }

And wanted to boot to the "Linux test" kernel, you need to run:

 # grub-reboot 1>2

As 1 is the second top menu (the submenu) and 2 is the third of the sub
menu entries.

Have the grub.cfg parsing for grub2 handle such cases.

Cc: stable@vger.kernel.org
Fixes: a15ba91361d46 ("ktest: Add support for grub2")
Reviewed-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: qcom: Select REMAP_MMIO for LLCC driver

commit 5d2fe2d7b616b8baa18348ead857b504fc2de336 upstream.

LLCC driver uses REGMAP_MMIO for accessing the hardware registers. So
select the dependency in Kconfig. Without this, there will be errors
while building the driver with COMPILE_TEST only:

ERROR: modpost: "__devm_regmap_init_mmio_clk" [drivers/soc/qcom/llcc-qcom.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:126: Module.symvers] Error 1
make: *** [Makefile:1944: modpost] Error 2

Cc: <stable@vger.kernel.org> # 4.19
Fixes: a3134fb09e0b ("drivers: soc: Add LLCC driver")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221129071201.30024-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: stv0288: use explicitly signed char

commit 7392134428c92a4cb541bd5c8f4f5c8d2e88364d upstream.

With char becoming unsigned by default, and with `char` alone being
ambiguous and based on architecture, signed chars need to be marked
explicitly as such. Use `s8` and `u8` types here, since that's what
surrounding code does. This fixes:

drivers/media/dvb-frontends/stv0288.c:471 stv0288_set_frontend() warn: assigning (-9) to unsigned variable 'tm'
drivers/media/dvb-frontends/stv0288.c:471 stv0288_set_frontend() warn: we never enter this loop

Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/af_packet: make sure to pull mac header

commit e9d3f80935b6607dcdc5682b00b1d4b28e0a0c5d upstream.

GSO assumes skb->head contains link layer headers.

tun device in some case can provide base 14 bytes,
regardless of VLAN being used or not.

After blamed commit, we can end up setting a network
header offset of 18+, we better pull the missing
bytes to avoid a posible crash in GSO.

syzbot report was:
kernel BUG at include/linux/skbuff.h:2699!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 3601 Comm: syz-executor210 Not tainted 5.18.0-syzkaller-11338-g2c5ca23f7414 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__skb_pull include/linux/skbuff.h:2699 [inline]
RIP: 0010:skb_mac_gso_segment+0x48f/0x530 net/core/gro.c:136
Code: 00 48 c7 c7 00 96 d4 8a c6 05 cb d3 45 06 01 e8 26 bb d0 01 e9 2f fd ff ff 49 c7 c4 ea ff ff ff e9 f1 fe ff ff e8 91 84 19 fa <0f> 0b 48 89 df e8 97 44 66 fa e9 7f fd ff ff e8 ad 44 66 fa e9 48
RSP: 0018:ffffc90002e2f4b8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000012 RCX: 0000000000000000
RDX: ffff88805bb58000 RSI: ffffffff8760ed0f RDI: 0000000000000004
RBP: 0000000000005dbc R08: 0000000000000004 R09: 0000000000000fe0
R10: 0000000000000fe4 R11: 0000000000000000 R12: 0000000000000fe0
R13: ffff88807194d780 R14: 1ffff920005c5e9b R15: 0000000000000012
FS:  000055555730f300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200015c0 CR3: 0000000071ff8000 CR4: 0000000000350ee0
Call Trace:
 <TASK>
 __skb_gso_segment+0x327/0x6e0 net/core/dev.c:3411
 skb_gso_segment include/linux/netdevice.h:4749 [inline]
 validate_xmit_skb+0x6bc/0xf10 net/core/dev.c:3669
 validate_xmit_skb_list+0xbc/0x120 net/core/dev.c:3719
 sch_direct_xmit+0x3d1/0xbe0 net/sched/sch_generic.c:327
 __dev_xmit_skb net/core/dev.c:3815 [inline]
 __dev_queue_xmit+0x14a1/0x3a00 net/core/dev.c:4219
 packet_snd net/packet/af_packet.c:3071 [inline]
 packet_sendmsg+0x21cb/0x5550 net/packet/af_packet.c:3102
 sock_sendmsg_nosec net/socket.c:714 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:734
 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546
 __sys_sendmsg net/socket.c:2575 [inline]
 __do_sys_sendmsg net/socket.c:2584 [inline]
 __se_sys_sendmsg net/socket.c:2582 [inline]
 __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f4b95da06c9
Code: 28 c3 e8 4a 15 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd7defc4c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007ffd7defc4f0 RCX: 00007f4b95da06c9
RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000003
RBP: 0000000000000003 R08: bb1414ac00000050 R09: bb1414ac00000050
R10: 0000000000000004 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffd7defc4e0 R14: 00007ffd7defc4d8 R15: 00007ffd7defc4d4
 </TASK>

Fixes: dfed913e8b55 ("net/af_packet: add VLAN support for AF_PACKET SOCK_RAW GSO")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/af_packet: add VLAN support for AF_PACKET SOCK_RAW GSO

commit dfed913e8b55a0c2c4906f1242fd38fd9a116e49 upstream.

Currently, the kernel drops GSO VLAN tagged packet if it's created with
socket(AF_PACKET, SOCK_RAW, 0) plus virtio_net_hdr.

The reason is AF_PACKET doesn't adjust the skb network header if there is
a VLAN tag. Then after virtio_net_hdr_set_proto() called, the skb->protocol
will be set to ETH_P_IP/IPv6. And in later inet/ipv6_gso_segment() the skb
is dropped as network header position is invalid.

Let's handle VLAN packets by adjusting network header position in
packet_parse_headers(). The adjustment is safe and does not affect the
later xmit as tap device also did that.

In packet_snd(), packet_parse_headers() need to be moved before calling
virtio_net_hdr_set_proto(), so we can set correct skb->protocol and
network header first.

There is no need to update tpacket_snd() as it calls packet_parse_headers()
in tpacket_fill_skb(), which is already before calling virtio_net_hdr_*
functions.

skb->no_fcs setting is also moved upper to make all skb settings together
and keep consistency with function packet_sendmsg_spkt().

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20220425014502.985464-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rcu-tasks: Simplify trc_read_check_handler() atomic operations

commit 96017bf9039763a2e02dcc6adaa18592cd73a39d upstream.

Currently, trc_wait_for_one_reader() atomically increments
the trc_n_readers_need_end counter before sending the IPI
invoking trc_read_check_handler().  All failure paths out of
trc_read_check_handler() and also from the smp_call_function_single()
within trc_wait_for_one_reader() must carefully atomically decrement
this counter.  This is more complex than it needs to be.

This commit therefore simplifies things and saves a few lines of
code by dispensing with the atomic decrements in favor of having
trc_read_check_handler() do the atomic increment only in the success case.
In theory, this represents no change in functionality.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC/SoundWire: dai: expand 'stream' concept beyond SoundWire

commit e8444560b4d9302a511f0996f4cfdf85b628f4ca upstream.

The HDAudio ASoC support relies on the set_tdm_slots() helper to store
the HDaudio stream tag in the tx_mask. This only works because of the
pre-existing order in soc-pcm.c, where the hw_params() is handled for
codec_dais *before* cpu_dais. When the order is reversed, the
stream_tag is used as a mask in the codec fixup functions:

/* fixup params based on TDM slot masks */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
    codec_dai->tx_mask)
soc_pcm_codec_params_fixup(&codec_params,
   codec_dai->tx_mask);

As a result of this confusion, the codec_params_fixup() ends-up
generating bad channel masks, depending on what stream_tag was
allocated.

We could add a flag to state that the tx_mask is really not a mask,
but it would be quite ugly to persist in overloading concepts.

Instead, this patch suggests a more generic get/set 'stream' API based
on the existing model for SoundWire. We can expand the concept to
store 'stream' opaque information that is specific to different DAI
types. In the case of HDAudio DAIs, we only need to store a stream tag
as an unsigned char pointer. The TDM rx_ and tx_masks should really
only be used to store masks.

Rename get_sdw_stream/set_sdw_stream callbacks and helpers as
get_stream/set_stream. No functionality change beyond the rename.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20211224021034.26635-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel/SOF: use set_stream() instead of set_tdm_slots() for HDAudio

commit 636110411ca726f19ef8e87b0be51bb9a4cdef06 upstream.

Overloading the tx_mask with a linear value is asking for trouble and
only works because the codec_dai hw_params() is called before the
cpu_dai hw_params().

Move to the more generic set_stream() API to pass the hdac_stream
information.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211224021034.26635-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kcsan: Instrument memcpy/memset/memmove with newer Clang

commit 7c201739beef1a586d806463f1465429cdce34c5 upstream.

With Clang version 16+, -fsanitize=thread will turn
memcpy/memset/memmove calls in instrumented functions into
__tsan_memcpy/__tsan_memset/__tsan_memmove calls respectively.

Add these functions to the core KCSAN runtime, so that we (a) catch data
races with mem* functions, and (b) won't run into linker errors with
such newer compilers.

Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[ elver@google.com: adjust check_access() call for v5.15 and earlier. ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SUNRPC: Don't leak netobj memory when gss_read_proxy_verf() fails

commit da522b5fe1a5f8b7c20a0023e87b52a150e53bf5 upstream.

Fixes: 030d794bf498 ("SUNRPC: Use gssproxy upcall for server RPCGSS authentication.")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: tpm_tis: Add the missed acpi_put_table() to fix memory leak

commit db9622f762104459ff87ecdf885cc42c18053fd9 upstream.

In check_acpi_tpm2(), we get the TPM2 table just to make
sure the table is there, not used after the init, so the
acpi_put_table() should be added to release the ACPI memory.

Fixes: 4cb586a188d4 ("tpm_tis: Consolidate the platform and acpi probe flow")
Cc: stable@vger.kernel.org
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: tpm_crb: Add the missed acpi_put_table() to fix memory leak

commit 37e90c374dd11cf4919c51e847c6d6ced0abc555 upstream.

In crb_acpi_add(), we get the TPM2 table to retrieve information
like start method, and then assign them to the priv data, so the
TPM2 table is not used after the init, should be freed, call
acpi_put_table() to fix the memory leak.

Fixes: 30fc8d138e91 ("tpm: TPM 2.0 CRB Interface")
Cc: stable@vger.kernel.org
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tpm: acpi: Call acpi_put_table() to fix memory leak

commit 8740a12ca2e2959531ad253bac99ada338b33d80 upstream.

The start and length of the event log area are obtained from
TPM2 or TCPA table, so we call acpi_get_table() to get the
ACPI information, but the acpi_get_table() should be coupled with
acpi_put_table() to release the ACPI memory, add the acpi_put_table()
properly to fix the memory leak.

While we are at it, remove the redundant empty line at the
end of the tpm_read_log_acpi().

Fixes: 0bfb23746052 ("tpm: Move eventlog files to a subdirectory")
Fixes: 85467f63a05c ("tpm: Add support for event log pointer found in TPM2 ACPI table")
Cc: stable@vger.kernel.org
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: vub300: fix warning - do not call blocking ops when !TASK_RUNNING

commit 4a44cd249604e29e7b90ae796d7692f5773dd348 upstream.

vub300_enable_sdio_irq() works with mutex and need TASK_RUNNING here.
Ensure that we mark current as TASK_RUNNING for sleepable context.

[   77.554641] do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff92a72c1d>] sdio_irq_thread+0x17d/0x5b0
[   77.554652] WARNING: CPU: 2 PID: 1983 at kernel/sched/core.c:9813 __might_sleep+0x116/0x160
[   77.554905] CPU: 2 PID: 1983 Comm: ksdioirqd/mmc1 Tainted: G           OE      6.1.0-rc5 #1
[   77.554910] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, BIOS BECFL357.86A.0081.2020.0504.1834 05/04/2020
[   77.554912] RIP: 0010:__might_sleep+0x116/0x160
[   77.554920] RSP: 0018:ffff888107b7fdb8 EFLAGS: 00010282
[   77.554923] RAX: 0000000000000000 RBX: ffff888118c1b740 RCX: 0000000000000000
[   77.554926] RDX: 0000000000000001 RSI: 0000000000000004 RDI: ffffed1020f6ffa9
[   77.554928] RBP: ffff888107b7fde0 R08: 0000000000000001 R09: ffffed1043ea60ba
[   77.554930] R10: ffff88821f5305cb R11: ffffed1043ea60b9 R12: ffffffff93aa3a60
[   77.554932] R13: 000000000000011b R14: 7fffffffffffffff R15: ffffffffc0558660
[   77.554934] FS:  0000000000000000(0000) GS:ffff88821f500000(0000) knlGS:0000000000000000
[   77.554937] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   77.554939] CR2: 00007f8a44010d68 CR3: 000000024421a003 CR4: 00000000003706e0
[   77.554942] Call Trace:
[   77.554944]  <TASK>
[   77.554952]  mutex_lock+0x78/0xf0
[   77.554973]  vub300_enable_sdio_irq+0x103/0x3c0 [vub300]
[   77.554981]  sdio_irq_thread+0x25c/0x5b0
[   77.555006]  kthread+0x2b8/0x370
[   77.555017]  ret_from_fork+0x1f/0x30
[   77.555023]  </TASK>
[   77.555025] ---[ end trace 0000000000000000 ]---

Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87dc45b122d26d63c80532976813c9365d7160b3.1670140888.git.deren.wu@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: allow to read node block after shutdown

commit e6ecb142429183cef4835f31d4134050ae660032 upstream.

If block address is still alive, we should give a valid node block even after
shutdown. Otherwise, we can see zero data when reading out a file.

Cc: stable@vger.kernel.org
Fixes: 83a3bfdb5a8a ("f2fs: indicate shutdown f2fs to allow unmount successfully")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>