vga: split vga_{load, save} into pci and common parts

Once there adjust VGAState <-> VGACommonState
Export vga_common_save/vga_common_load (nreeded by wmvare_vga
Remove vga.pci_dev field, it is not needed anymore

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

vga: export vga_ioport_{read,write}

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

cirrus_vga: prefix vga_ioport_{read, write} with cirrus

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

vga: remove useless cast from void *

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

USB: use opaque parameter passing for monitor handle

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Sparc64: use ISA bus for i8042

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Sparc64: remove unused variables

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Make ioport default tables const

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Fix indentation

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

When targeting PPU use rlwinm instead of andi. if possible

andi. is microcoded and slow there.

Signed-off-by: malc <av1474@comtv.ru>

Checks in select_soundhw were never intended to accept abbreviations

Signed-off-by: malc <av1474@comtv.ru>

Fix Sparse warnings: add "static"

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

esp: handle "select without attention"

Up to now "select without attention" was handled the same way as
"select with attention". According to

http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR53C9X.txt

select without ATN sends the CDB (Command Descriptor Block) directly,
whereas select with ATN sends one message phase byte
followed by 6, 10, or 12 command phase bytes.

The attached patch implements the behaviour described above.

Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
[blauwirbel@gmail.com: cleaned up formatting]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Include sys-queue.h early to override system queue definitions on BSD

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Shuffle lines to avoid gcc 3 warning about redundant redeclaration

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Bring pcbios, seabios, and vgabios into the tree as git submodules.  Right now,
they aren't integrated into the build but we can do that incrementally.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

mips malta: Fix fdc regression and use qdev for i8042 setup

8baf73adf664e79eae201c3f618078a220a661d9 (qdev/isa: convert fdc)
breaks MIPS Malta:

Tried to create isa device isa-fdc with no isa bus present

Fix this by creating an isa bus for piix4.
This change also requires some more qdev related changes
(similar changes were applied to pc.c) and allows
cleaning of piix3/piix4 code.

Thanks to Gerd Hoffmann for his hints.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Introduce QDict unit-tests

This suite contains tests to assure that QDict API works as expected.

To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:

$ ./check-qdict

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Introduce QDict test data file

This file is used by the QDict stress test, it adds 5k nodes
on the dictionary and performs various operations.

My original file had 21k entries and almost 400k of size. After
some discussion with Eduardo Habkost, I decided to reduce the
size.

There are ways to generate this kind of data dynamically, but
it has its problems too.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Introduce QString unit-tests

This suite contains tests to assure that QString API works as expected.

To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:

$ ./check-qstring

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Introduce QInt unit-tests

This suite contains tests to assure that QInt API works as expected.

To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:

$ ./check-qint

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Add check support

Check is a unit testing framework for C.

All the QObjects have unit-tests and more will be written for the
future data types.

More info about check can be found at:

http://check.sourceforge.net/

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Update supported types documentation

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: fail when 'i' type is greater than 32-bit

The 'i' argument type is for 32-bit only and most handlers
will use an 'int' to store its value.

It's better to fail gracefully when the user enters a value
greater than 32-bit than to get subtle casting bugs.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Drop args[] handling code

This commit drops all the code used to handle the 'args[]' array,
as now we use a dictionary to pass arguments.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Drop str_allocated[]

It's not used anymore, as QDict is now used to handle string
memory allocation/deallocation.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Drop unused macros

GET_TLONG() and GET_TPHYSADDR() are not needed anymore, QInt can
handle such conversions.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Split monitor_handle_command()

In order to help the integration with unit-tests and having a better
design, this commit splits monitor_handle_command() into two parts.

The parsing code is moved to a function called monitor_parse_command(),
while allocating memory and calling the handler is still done by
monitor_handle_command().

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Port handler_10 to use QDict

This commit ports command handlers that receive ten arguments to use
the new monitor's dictionary.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Drop handler_8 and handler_9

Commit 79c4f6b08009a1d23177c2be8bd003253cf3686a added handler_8 and
handler_9 handling, but there isn't any command handler with those
number of arguments.

Just drop them.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Port handler_7 to use QDict

This commit ports command handlers that receive seven arguments to
use the new monitor's dictionary.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Port handler_6 to use QDict

This commit ports command handlers that receive six arguments to use
the new monitor's dictionary.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Port handler_5 to use QDict

This commit ports command handlers that receive five arguments to use
the new monitor's dictionary.

Note that GET_TLONG() and GET_TPHYSADDR() macros are not used anymore.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Port handler_4 to use QDict

This commit ports command handlers that receive four arguments to use
the new monitor's dictionary.

Note that GET_TLONG() and GET_TPHYSADDR() macros are not used anymore.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Port handler_3 to use QDict

This commit ports command handlers that receive three arguments to use
the new monitor's dictionary.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Port handler_2 to use QDict

This commit ports command handlers that receive two arguments to use
the new monitor's dictionary.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Port handler_1 to use QDict

This commit ports command handlers that receive one argument to use
the new monitor's dictionary.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Port handler_0 to use QDict

This commit ports command handlers that receive no arguments to use
the new monitor's dictionary.

It might seem no sense to do this, as the handlers have no arguments,
but at the end of this porting work all handlers will have the same
structure.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Export QDict header

Command handlers will have to use QDict functions, so export
qdict.h through monitor.h.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: Setup a QDict with arguments to handlers

With this commit monitor_handle_command() will be able to setup a
QDict with arguments to command handlers.

However, the current 'args[]' method is still being used, next
changes will port commands to get their arguments from the dictionary.

Two changes are worth noting:

1. The '/' argument type always adds the following standard keys in the
dictionary: 'count', 'format' and 'size'. This way, the argument
name used in the 'args_type' string doesn't matter

2. The optional argument type '?' doesn't need to pass the additional
'has_arg' argument, hanlders can do the same check with qdict_haskey()

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

monitor: New format for handlers argument types

Current handlers argument types, as defined in qemu-monitor.hx file,
are a sequence of chars where each one represents one argument type
of the command handler. The number of chars is also used to know how
many arguments a given handler accepts.

This commit defines a new format, which makes mandatory the use of
a name for each argument.

For example, do_eject() command handler is currently defined as:

{ "eject", "-fB", do_eject, ... }

With the new format it becomes:

{ "eject", "force:-f,filename:B", do_eject, ... }

This way the Monitor will be capable of setting up a dictionary, using
each argument's name as the key and the argument itself as the value.

This commit also adds two new functions: key_get_info() and
next_arg_type(), both are used to parse the new format.

Currently key_get_info() consumes the 'key' part of the new format and
discards it, this way the current parsing code is not affected by this
change.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Add wrappers to functions used by the Monitor

Some functions exported to be used by the Monitor as command
handlers are also called in other places as regular functions.

When those functions got ported to use the Monitor dictionary
to pass argments, the callers will have to setup a dictionary
to be able to call them.

To avoid this problem, this commit add wrappers to those functions,
so that we change the wrapper to accept the dictionary, letting
the current functions as is.

The following wrappers are being added:

- do_help_cmd()
- do_pci_device_hot_remove()

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Introduce QDict

QDict is a high-level dictionary data type that can be used to store a
collection of QObjects. A unique key is associated with only one
QObject.

The following functions are available:

- qdict_new()    Create a new QDict
- qdict_put()    Add a new 'key:object' pair
- qdict_get()    Get the QObject of a given key
- qdict_del()    Delete a 'key:object' pair
- qdict_size()   Return the size of the dictionary
- qdict_haskey() Check if a given 'key' exists

Some high-level helpers to operate on QStrings and QInts objects
are also provided.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Introduce QString

QString is a high-level data type that can be used to represent
C strings.

The following functions are available:

- qstring_from_str() Create a new QString
- qstring_get_str()  Get a pointer to the stored string

Note that qstring_get_str() is too low-level for a data type like
this, but it's interesting for quick read-only accesses.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Introduce QInt

QInt is a high-level data type that can be used to represent integers,
internally it stores an int64_t value.

The following functions are available:

- qint_from_int() Create a new QInt
- qint_get_int()  Get the stored integer

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Introduce QObject

This commit introduces the qobject.h header file, it contains
basic QObject definitions and helper macros.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

ide: move cmd+irq from IDEState to IDEBus.

These variables are per bus, not per drive.  Lets move them and
cleanup things a bit.  And fix the cmd migration bug for real.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

ide: pass down DriveInfo instead of BlockDriverState

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Support for multiple -monitor devices

Rebased version of Anthony's patch: Allow to specify more than one
monitor terminal via the -monitor command line switch. This is
particularly useful when libvirt or some other management tool already
occupies the primary monitor but you need another one for debugging.
The current clumsy workaround is to multiplex such additional terminals
over a qemu character device (e.g. -serial mon:<device>).

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

net: Fix send queue ordering

Ensure that packets enqueued for delayed delivery are dequeued in FIFO
order. At least one simplistic guest TCP/IP stack became unhappy due to
sporadically reordered packet streams.

At this chance, switch the send queue implementation to TAILQ.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

do not issue ioctl from within the io thread

According to Documentation/kvm/api.txt, (and well, to common sense),
we should not be calling vcpu ioctls from within the iothread.
Since vcpu initialization issues a vcpu ioctl, move it a little bit
further in time to prevent it.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Delay sighandler_setup()

If we are using --serial telnet:0:5555,server  or similar, ^C will not
kill qemu.  We need to first connect using telnet, and the the ^C takes
effect.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Remove typedef for bool from eepro100.c

eepro100.c shouldn't have the need to do this in its local header file.

And I recently started getting this:

$ make -j3
...
  CC    x86_64-softmmu/eepro100.o
/home/amit/src/qemu/hw/eepro100.c:112: error: two or more data types
in declaration specifiers
/home/amit/src/qemu/hw/eepro100.c:112: warning: useless type name in
empty declaration
make[1]: *** [eepro100.o] Error 1

so just remove the typedef and include <stdbool.h> instead.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

add documentation for multi-core features

extend QEMU's internal help and man page to cover the recently
added multi-core feature.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

piix3: use new vmstate infrastructure

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

i440fx: use new vmstate infrastructure

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

VMState: Fix sub-structs versioning

We can't check the version in a substruct, it is not stored anywhere

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Update SaveVM versions

Now that we have all fields belonging to a PCIDevice, save each field
on the device that it belongs.  This means moving pci_irq_levels
from PCII440FXState to PIIX3State.
Old formats are loaded, but we only save on the new saner format.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

pci_irq_levels[] belong to PIIX3State

With previous cleanups, now it is possible to put it where it belongs

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Save irq_state into PCII440FXState

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

We can add piix3_dev now to PIIX3IrqState

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Fold piix3_init() intto i440fx_init

i440fx_init will now work properly if we don't setup piix3

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Introduce PIIX3IrqState for piix3 irq's state

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Create PIIX3State instead of using PCIDevice for PIIX3

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

We want the argument pass to set_irq to be opaque

piix_pci want to pass more things that the pic

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Move smm_enabled and isa_memory_mappings to PCII440FXState

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Use PCII440FXState instead of generic PCIDevice

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

low_set_irq is not used anywhere

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Split piix4 support from piix_pci.c

Now mips_malta uses piix4 and pc's use piix_pci definitions

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

piix4 don't use pci_irq_levels at all

Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

microblaze: Trap on illegal load/store sizes.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

microblaze: Correct FPU decoding masks.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

microblaze: Compute masks for alignment checks at translation time.

Thanks to Blue Swirl for reporting.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

microblaze: Trap on bus accesses to unmapped areas.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

microblaze: MMU shows more respect to synthesis config.

The microblaze MMU can be synthesized in different configurations.
Have the MMU model show more respect to the chosen configuration.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

microblaze: Trap on unaligned data accesses.

Untested...

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

microblaze: Trap on divizions by zero.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

microblaze: Correct mfs into r0.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

microblaze: Catch illegal insns and privilege violations.

Raise illegal instruction exceptions when executing instructions that
require units not available on the particulare microblaze configuration.

Also trap priviliege violations made by userspace.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

microblaze: Add infrastructure for supporting hw exceptions.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

microblaze: Clear exception in dslot ESR bit if not in dslot.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

microblaze: Correct MMU debug log.

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>

Fix warning on x86_64

audio/esdaudio.c: In function 'qesd_thread_out':
audio/esdaudio.c:136: error: format '%d' expects type 'int', but
argument 3 has type 'ssize_t'
audio/esdaudio.c: In function 'qesd_thread_in':
audio/esdaudio.c:366: error: format '%d' expects type 'int', but
argument 3 has type 'ssize_t'

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: malc <av1474@comtv.ru>

Sparc32: port sun4c interrupt controller to VMState design

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Sparc32: port timers to VMState design

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Sparc32: timer field is never NULL

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Add VMState support for ptimers

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

esp (sparc32) Extra scsi data.

> ESP: Message Accepted (12)
> ESP: Transfer status (sense=0)
> ESP: read reg[5]: 0x20
> ESP: read reg[4]: 0x07
> ESP: read reg[7]: 0x02
> Extra scsi data. Fatal error.

It looks like "Message Accepted" shouldn't write a response. At least
ESP_RFLAGS must definetely be 0. With the following fix OBP goes one
step further:

Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Fix compiler warnings

Starting with commit df7a86ed735eafefbd046c8cad7134652fe3f600,
mingw32 builds result in a compiler warning for dns_addr:

  CC    slirp/slirp.o
/home/stefan/src/qemu/savannah/qemu/slirp/slirp.c:50: warning: missing braces around initializer
/home/stefan/src/qemu/savannah/qemu/slirp/slirp.c:50: warning: (near initialization for ‘dns_addr.S_un’)

Removing the assignment fixes the warning without the need of special code
for mingw32 (and also saves some bytes in the resulting binary).

To fix another potential compiler warning, the missing 'static'
attribute was added.

The same changes were applied to dns_addr_time.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Fix breakage due to __thread

Thread-local storage is not supported on all hosts.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Fix gcc 3 warning: comparison is always true due to limited range of data type

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Fix gcc 3 warning about uninitialized variable

If nb_sectors is 0, cluster_offset will not be initialized.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Sparc32: port Slavio misc devices to VMState design

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Sparc32: port ECC memory controller to VMState design

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Sparc32: port IOMMU to VMState design

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Sparc32: port DMA controller to VMState design

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Sparc32: port TCX to VMState design

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Sparc32: port interrupt controller to VMState design

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Update OpenBIOS images to r569

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>

Suppress kraxelisms

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>