drm/i915: Don't relay on I915_MAX_PIPES

Let's remove the dependency on I915_MAX_PIPES. Instead, get the number
of pipes from platform information.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507630626-23806-2-git-send-email-mika.kahola@intel.com

drm/i915: Nuke the bogus kernel doc for i9xx_disable_pll()

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913140900.6972-6-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Pass crtc state to i9xx_enable_pll()

Pass the crtc state to i9xx_enable_pll() and use it rather than
crtc->config.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913140900.6972-5-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Parametrize CBR_DPLLBMD_PIPE defines

Apply a bit of polish by parametrizing the CBR_DPLLBMD_PIPE defines.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170913140900.6972-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Use enum pipe for PCH transcoders

One more place where we've failed to switch to enum pipe when talking
about PCH transcoders.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010125556.25086-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Increase atomic update vblank evasion time with lockdep

All our mmio writes take forever with lockdep due to the constant
lock acquire&dropping we do. Ville has some patches to only acquire
the mmio spinlocks once instead for every single mmio, but those
aren't ready yet.

As an interim solution just extend our budget slightly when lockdep is
enabled, to avoid the rare and sporadic noise in CI.

v2: I forgot to add the FIXME comment ...

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=103169
References: https://bugs.freedesktop.org/show_bug.cgi?id=103124
References: https://bugs.freedesktop.org/show_bug.cgi?id=102403
References: https://bugs.freedesktop.org/show_bug.cgi?id=103020
References: https://bugs.freedesktop.org/show_bug.cgi?id=103019
References: https://bugs.freedesktop.org/show_bug.cgi?id=102723
References: https://bugs.freedesktop.org/show_bug.cgi?id=102544
References: https://bugs.freedesktop.org/show_bug.cgi?id=103180
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010091816.26898-1-daniel.vetter@ffwll.ch

drm/i915: Use execlists_num_ports instead of size of array

There is function to tell how many ports we have, so use it.
We still have direct relationship with array size and port count,
so no harm was done.

Fixes: 76e70087d360 ("drm/i915: Make execlist port count variable")
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010114857.13108-1-mika.kuoppala@intel.com

drm/i915: Preallocate our mmu notifier workequeu to unbreak cpu hotplug deadlock

4.14-rc1 gained the fancy new cross-release support in lockdep, which
seems to have uncovered a few more rules about what is allowed and
isn't.

This one here seems to indicate that allocating a work-queue while
holding mmap_sem is a no-go, so let's try to preallocate it.

Of course another way to break this chain would be somewhere in the
cpu hotplug code, since this isn't the only trace we're finding now
which goes through msr_create_device.

Full lockdep splat:

======================================================
WARNING: possible circular locking dependency detected
4.14.0-rc1-CI-CI_DRM_3118+ #1 Tainted: G     U
------------------------------------------------------
prime_mmap/1551 is trying to acquire lock:
 (cpu_hotplug_lock.rw_sem){++++}, at: [<ffffffff8109dbb7>] apply_workqueue_attrs+0x17/0x50

but task is already holding lock:
 (&dev_priv->mm_lock){+.+.}, at: [<ffffffffa01a7b2a>] i915_gem_userptr_init__mmu_notifier+0x14a/0x270 [i915]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #6 (&dev_priv->mm_lock){+.+.}:
       __lock_acquire+0x1420/0x15e0
       lock_acquire+0xb0/0x200
       __mutex_lock+0x86/0x9b0
       mutex_lock_nested+0x1b/0x20
       i915_gem_userptr_init__mmu_notifier+0x14a/0x270 [i915]
       i915_gem_userptr_ioctl+0x222/0x2c0 [i915]
       drm_ioctl_kernel+0x69/0xb0
       drm_ioctl+0x2f9/0x3d0
       do_vfs_ioctl+0x94/0x670
       SyS_ioctl+0x41/0x70
       entry_SYSCALL_64_fastpath+0x1c/0xb1

-> #5 (&mm->mmap_sem){++++}:
       __lock_acquire+0x1420/0x15e0
       lock_acquire+0xb0/0x200
       __might_fault+0x68/0x90
       _copy_to_user+0x23/0x70
       filldir+0xa5/0x120
       dcache_readdir+0xf9/0x170
       iterate_dir+0x69/0x1a0
       SyS_getdents+0xa5/0x140
       entry_SYSCALL_64_fastpath+0x1c/0xb1

-> #4 (&sb->s_type->i_mutex_key#5){++++}:
       down_write+0x3b/0x70
       handle_create+0xcb/0x1e0
       devtmpfsd+0x139/0x180
       kthread+0x152/0x190
       ret_from_fork+0x27/0x40

-> #3 ((complete)&req.done){+.+.}:
       __lock_acquire+0x1420/0x15e0
       lock_acquire+0xb0/0x200
       wait_for_common+0x58/0x210
       wait_for_completion+0x1d/0x20
       devtmpfs_create_node+0x13d/0x160
       device_add+0x5eb/0x620
       device_create_groups_vargs+0xe0/0xf0
       device_create+0x3a/0x40
       msr_device_create+0x2b/0x40
       cpuhp_invoke_callback+0xa3/0x840
       cpuhp_thread_fun+0x7a/0x150
       smpboot_thread_fn+0x18a/0x280
       kthread+0x152/0x190
       ret_from_fork+0x27/0x40

-> #2 (cpuhp_state){+.+.}:
       __lock_acquire+0x1420/0x15e0
       lock_acquire+0xb0/0x200
       cpuhp_issue_call+0x10b/0x170
       __cpuhp_setup_state_cpuslocked+0x134/0x2a0
       __cpuhp_setup_state+0x46/0x60
       page_writeback_init+0x43/0x67
       pagecache_init+0x3d/0x42
       start_kernel+0x3a8/0x3fc
       x86_64_start_reservations+0x2a/0x2c
       x86_64_start_kernel+0x6d/0x70
       verify_cpu+0x0/0xfb

-> #1 (cpuhp_state_mutex){+.+.}:
       __lock_acquire+0x1420/0x15e0
       lock_acquire+0xb0/0x200
       __mutex_lock+0x86/0x9b0
       mutex_lock_nested+0x1b/0x20
       __cpuhp_setup_state_cpuslocked+0x52/0x2a0
       __cpuhp_setup_state+0x46/0x60
       page_alloc_init+0x28/0x30
       start_kernel+0x145/0x3fc
       x86_64_start_reservations+0x2a/0x2c
       x86_64_start_kernel+0x6d/0x70
       verify_cpu+0x0/0xfb

-> #0 (cpu_hotplug_lock.rw_sem){++++}:
       check_prev_add+0x430/0x840
       __lock_acquire+0x1420/0x15e0
       lock_acquire+0xb0/0x200
       cpus_read_lock+0x3d/0xb0
       apply_workqueue_attrs+0x17/0x50
       __alloc_workqueue_key+0x1d8/0x4d9
       i915_gem_userptr_init__mmu_notifier+0x1fb/0x270 [i915]
       i915_gem_userptr_ioctl+0x222/0x2c0 [i915]
       drm_ioctl_kernel+0x69/0xb0
       drm_ioctl+0x2f9/0x3d0
       do_vfs_ioctl+0x94/0x670
       SyS_ioctl+0x41/0x70
       entry_SYSCALL_64_fastpath+0x1c/0xb1

other info that might help us debug this:

Chain exists of:
  cpu_hotplug_lock.rw_sem --> &mm->mmap_sem --> &dev_priv->mm_lock

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&dev_priv->mm_lock);
                               lock(&mm->mmap_sem);
                               lock(&dev_priv->mm_lock);
  lock(cpu_hotplug_lock.rw_sem);

 *** DEADLOCK ***

2 locks held by prime_mmap/1551:
 #0:  (&mm->mmap_sem){++++}, at: [<ffffffffa01a7b18>] i915_gem_userptr_init__mmu_notifier+0x138/0x270 [i915]
 #1:  (&dev_priv->mm_lock){+.+.}, at: [<ffffffffa01a7b2a>] i915_gem_userptr_init__mmu_notifier+0x14a/0x270 [i915]

stack backtrace:
CPU: 4 PID: 1551 Comm: prime_mmap Tainted: G     U          4.14.0-rc1-CI-CI_DRM_3118+ #1
Hardware name: Dell Inc. XPS 8300  /0Y2MRG, BIOS A06 10/17/2011
Call Trace:
 dump_stack+0x68/0x9f
 print_circular_bug+0x235/0x3c0
 ? lockdep_init_map_crosslock+0x20/0x20
 check_prev_add+0x430/0x840
 __lock_acquire+0x1420/0x15e0
 ? __lock_acquire+0x1420/0x15e0
 ? lockdep_init_map_crosslock+0x20/0x20
 lock_acquire+0xb0/0x200
 ? apply_workqueue_attrs+0x17/0x50
 cpus_read_lock+0x3d/0xb0
 ? apply_workqueue_attrs+0x17/0x50
 apply_workqueue_attrs+0x17/0x50
 __alloc_workqueue_key+0x1d8/0x4d9
 ? __lockdep_init_map+0x57/0x1c0
 i915_gem_userptr_init__mmu_notifier+0x1fb/0x270 [i915]
 i915_gem_userptr_ioctl+0x222/0x2c0 [i915]
 ? i915_gem_userptr_release+0x140/0x140 [i915]
 drm_ioctl_kernel+0x69/0xb0
 drm_ioctl+0x2f9/0x3d0
 ? i915_gem_userptr_release+0x140/0x140 [i915]
 ? __do_page_fault+0x2a4/0x570
 do_vfs_ioctl+0x94/0x670
 ? entry_SYSCALL_64_fastpath+0x5/0xb1
 ? __this_cpu_preempt_check+0x13/0x20
 ? trace_hardirqs_on_caller+0xe3/0x1b0
 SyS_ioctl+0x41/0x70
 entry_SYSCALL_64_fastpath+0x1c/0xb1
RIP: 0033:0x7fbb83c39587
RSP: 002b:00007fff188dc228 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: ffffffff81492963 RCX: 00007fbb83c39587
RDX: 00007fff188dc260 RSI: 00000000c0186473 RDI: 0000000000000003
RBP: ffffc90001487f88 R08: 0000000000000000 R09: 00007fff188dc2ac
R10: 00007fbb83efcb58 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000003 R14: 00000000c0186473 R15: 00007fff188dc2ac
 ? __this_cpu_preempt_check+0x13/0x20

Note that this also has the minor benefit of slightly reducing the
critical section where we hold mmap_sem.

v2: Set ret correctly when we raced with another thread.

v3: Use Chris' diff. Attach the right lockdep splat.

v4: Repaint in Tvrtko's colors (aka don't report ENOMEM if we race and
some other thread managed to not also get an ENOMEM and successfully
install the mmu notifier. Note that the kernel guarantees that small
allocations succeed, so this never actually happens).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sasha Levin <alexander.levin@verizon.com>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Cc: Tejun Heo <tj@kernel.org>
References: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_3180/shard-hsw3/igt@prime_mmap@test_userptr.html
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102939
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009164401.16035-1-daniel.vetter@ffwll.ch

drm/i915/bios: don't pass bdb to parsers that don't parse VBT directly

Hint that you're not supposed to look at VBT in these functions.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b82c326be8c796a70bdc2bd1c479bbb6159f5cb0.1506586821.git.jani.nikula@intel.com

drm/i915/bios: parse SDVO device mapping from pre-parsed child devices

We parse and store the child devices in
parse_general_definitions(). There is no need to parse the VBT block
again for SDVO device mapping. Do the same as we do in
parse_ddi_ports().

We no longer have access to child device size at this stage, but we also
don't need to worry about reading past the child device anymore. Instead
of a child device size check, do a mild optimization by limiting the
parsing to gens 3 through 7.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c918d4173dd38a165295f1270cb16c2c01bd8cd1.1506586821.git.jani.nikula@intel.com

drm/i915/bios: merge parse_device_mapping() into parse_general_definitions()

They're both parsing the same block, and there's no need for them to be
split. The former also benefits from the range checks in the latter.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/64a292606ecbb0b8602e6c5523c5746573ec3944.1506586821.git.jani.nikula@intel.com

drm/i915/bios: cleanup comments and useless return

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4a95fb9d23d980830e3158d3c57258e6539965ce.1506586821.git.jani.nikula@intel.com

drm/i915/bios: remove an unnecessary temp variable

Prepare for merging parse_device_mapping() into
parse_general_definitions(). No functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f1c3621e2622f4debdfb4a2f5c1959845754ac04.1506586821.git.jani.nikula@intel.com

drm/i915/bios: don't initialize fields based on vbt version

In theory, these might clobber information for older VBT versions.

We might have to store the BDB version for later parsing, but currently
all code accessing these fields will only use them on newer platforms
with new enough BDB versions.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0232d9cb258e8f83c4180cdb8aad1459a312ec2a.1506586821.git.jani.nikula@intel.com

drm/i915/bios: refactor parse general definitions

Early return on failures. Rename the variable for later merging with
parse_device_mappings().

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/785abb904a572752fec68d90d34efeb67774dc1f.1506586821.git.jani.nikula@intel.com

drm/i915/bios: parse DDI ports also for CHV for HDMI DDC pin and DP AUX channel

While technically CHV isn't DDI, we do look at the VBT based DDI port
info for HDMI DDC pin and DP AUX channel. (We call these "alternate",
but they're really just something that aren't platform defaults.)

In commit e4ab73a13291 ("drm/i915: Respect alternate_ddc_pin for all DDI
ports") Ville writes, "IIRC there may be CHV system that might actually
need this."

I'm not sure why there couldn't be even more platforms that need this,
but start conservative, and parse the info for CHV in addition to DDI.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100553
Reported-by: Marek Wilczewski <mw@3cte.pl>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d0815082cb98487618429b62414854137049b888.1506586821.git.jani.nikula@intel.com

drm/i915: avoid division by zero on cnl_calc_wrpll_link

If for some unexpected reason the registers all read zero it's better
to WARN and return instead of dividing by zero and completely freezing
the machine.

I don't expect this to happen in the wild with the current code, but I
accidentally triggered the division by zero while doing some debugging
in an unusual environment.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171005213842.11423-2-paulo.r.zanoni@intel.com

drm/i915: add the BXT and CNL DPLL registers to pipe_config_compare

Looks like we were missing them.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170922205343.16006-2-paulo.r.zanoni@intel.com

drm/i915: s/sg_mask/sg_page_sizes/

It's a little unclear what the sg_mask actually is, so prefer the more
meaningful name of sg_page_sizes.

Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009110024.29114-1-matthew.auld@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Early rejection of mappable GGTT pin attempts for large bo

Currently, we reject attempting to pin a large bo into the mappable
aperture, but only after trying to create the vma. Under debug kernels,
repeatedly creating and freeing that vma for an oversized bo consumes
one-third of the runtime for pwrite/pread tests as it is spent on
kmalloc/kfree tracking. If we move the rejection to before creating that
vma, we lose some accuracy of checking against the fence_size as opposed
to object size, though the fence can never be smaller than the object.
Note that the vma creation itself will reject an attempt to create a vma
larger than the GTT so we can remove one redundant test.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009084401.29090-7-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Avoid evicting user fault mappable vma for pread/pwrite

Both pread/pwrite GTT paths provide a fast fallback in case we cannot
map the whole object at a time. Currently, we use the fallback for very
large objects and for active objects that would require remapping, but
we can also add active fault mappable objects to the list that we want
to avoid evicting. The rationale is that such fault mappable objects are
in active use and to evict requires tearing down the CPU PTE and forcing
a page fault on the next access; more costly, and intefers with other
processes, than our per-page GTT fallback.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009084401.29090-6-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Try a minimal attempt to insert the whole object for relocations

As we have a lightweight fallback to insert a single page into the
aperture, try to avoid any heavier evictions when attempting to insert
the entire object.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009084401.29090-5-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Check PIN_NONFAULT overlaps in evict_for_node

If the caller says that he doesn't want to evict any other faulting
vma, honour that flag. The logic was used in evict_something, but not
the more specific evict_for_node, now being used as a preliminary probe
since commit 606fec956c0e ("drm/i915: Prefer random replacement before
eviction search").

Fixes: 606fec956c0e ("drm/i915: Prefer random replacement before eviction search")
Fixes: 821188778b9b ("drm/i915: Choose not to evict faultable objects from the GGTT")
References: https://bugs.freedesktop.org/show_bug.cgi?id=102490
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009084401.29090-4-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Track user GTT faulting per-vma

We don't wish to refault the entire object (other vma) when unbinding
one partial vma. To do this track which vma have been faulted into the
user's address space.

v2: Use a local vma_offset to tidy up a multiline unmap_mapping_range().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009084401.29090-3-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Consolidate get_fence with pin_fence

Following the pattern now used for obj->mm.pages, use just pin_fence and
unpin_fence to control access to the fence registers. I.e. instead of
calling get_fence(); pin_fence(), we now just need to call pin_fence().
This will make it easier to reduce the locking requirements around
fence registers.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009084401.29090-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Pin fence for iomap

Acquire the fence register for the iomap in i915_vma_pin_iomap() on
behalf of the caller.

We probably want for the caller to specify whether the fence should be
pinned for their usage, but at the moment all callers do want the
associated fence, or none, so take it on their behalf.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009084401.29090-1-chris@chris-wilson.co.uk

drm/i915: Provide an assert for when we expect forcewake to be held

Add assert_forcewakes_active() (the complementary function to
assert_forcewakes_inactive) that documents the requirement of a
function for its callers to be holding the forcewake ref (i.e. the
function is part of a sequence over which RC6 must be prevented).

One such example is during ringbuffer reset, where RC6 must be held
across the whole reinitialisation sequence.

v2: Include debug information in the WARN so we know which fw domain is
missing.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20171009110301.21705-5-chris@chris-wilson.co.uk

drm/i915/selftests: Hold the rpm wakeref for the reset tests

The lowlevel reset functions expect the caller to be holding the rpm
wakeref for the device access across the reset. We were not explicitly
doing this in the sefltest, so for simplicity acquire the wakeref for
the duration of all subtests.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009110301.21705-4-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

drm/i915: Hold forcewake for the duration of reset+restart

Resetting the engine requires us to hold the forcewake wakeref to
prevent RC6 trying to happen in the middle of the reset sequence. The
consequence of an unwanted RC6 event in the middle is that random state
is then saved to the powercontext and restored later, which may
overwrite the mmio state we need to preserve (e.g. PD_DIR_BASE in the
legacy ringbuffer reset_ring_common()).

This was noticed in the live_hangcheck selftests when Haswell would
sporadically fail to restart during igt_reset_queue().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009110301.21705-3-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

drm/i915/selftests: Pretty print engine state when requests fail to start

During hangcheck testing, we try to execute requests following the GPU
reset, and in particular want to try and debug when those fail.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009110301.21705-2-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Make i915_engine_info pretty printer to standalone

We can use drm_printer to hide the differences between printk and
seq_printf, and so make the i915_engine_info pretty printer able to be
called from different contexts and not just debugfs. For instance, I
want to use the pretty printer to debug kselftests.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009110301.21705-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>

drm/i915: Assert we do not try to expand VMA for hugepage inside GGTT

We only apply the hugepage PD redirection inside the ppGTT, so during
i915_vma_insert() we want to exclude the GGTT from the additional
alignment constraints (thereby avoiding the extra GTT pressure from
fragmentation). Add an assert to document that intention alongside the
comment.

v2: After discussion with Matthew, make it a blanket GGTT ban
(previously we allowed the expansion for appgtt, and so indirectly
ggtt). There are issues we need to fix before allowing the current
appgtt to be used with hugepages, and if we do, we probably want more
care over when to expand/align, as the mappable aperture inside the ggtt
is precious.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009092019.20747-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Use intel_get_pipe_timings() and intel_mode_from_pipe_config() in intel_crtc_mode_get()

Eliminate the duplicate code for pipe timing readout in
intel_crtc_mode_get() by using the functions we use for the normal state
readout.

v2: Store dotclock in adjusted_mode instead of the final mode

Cc: dri-devel@lists.freedesktop.org
Cc: Rob Kramer <rob@solution-space.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1459536530-17754-1-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Read timings from the correct transcoder in intel_crtc_mode_get()

intel_crtc->config->cpu_transcoder isn't yet filled out when
intel_crtc_mode_get() gets called during output probing, so we should
not use it there. Instead intel_crtc_mode_get() figures out the correct
transcoder on its own, and that's what we should use.

If the BIOS boots LVDS on pipe B, intel_crtc_mode_get() would actually
end up reading the timings from pipe A instead (since PIPE_A==0),
which clearly isn't what we want.

It looks to me like this may have been broken by
commit eccb140bca67 ("drm/i915: hw state readout&check support for cpu_transcoder")
as that one removed the early initialization of cpu_transcoder from
intel_crtc_init().

Cc: stable@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Rob Kramer <rob@solution-space.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: Rob Kramer <rob@solution-space.com>
Fixes: eccb140bca67 ("drm/i915: hw state readout&check support for cpu_transcoder")
References: https://lists.freedesktop.org/archives/dri-devel/2016-April/104142.html
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1459525046-19425-1-git-send-email-ville.syrjala@linux.intel.com

drm/i915: enable platform support for 2M pages

For gen8+ platforms which support the 48b PPGTT, enable platform level
support for 2M pages. Also enable for mock testing.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-22-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-21-chris@chris-wilson.co.uk

drm/i915: enable platform support for 64K pages

For gen9+ enable platform level support for 64K pages. Also enable for
mock testing.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-21-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-20-chris@chris-wilson.co.uk

drm/i915: disable platform support for vGPU huge gtt pages

Currently gvt gtt handling doesn't support huge page entries, so disable
for now.

v2: remove useless 48b PPGTT check

Suggested-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-20-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-19-chris@chris-wilson.co.uk

drm/i915/selftests: mix huge pages

Try to mix sg page sizes for 4K, 64K and 2M pages.

v2: s/BIT(x) >> 12/BIT(x) >> PAGE_SHIFT/

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-19-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-18-chris@chris-wilson.co.uk

drm/i915/selftests: huge page tests

v2: mock test page support configurations and add MI_STORE_DWORD test

v3: run all mockable huge page tests on all platforms via the mock_device

v4: add pin_update regression test
    various improvements suggested by Chris

v5: fix issues reported by kbuild
    test single sg spanning multiple page sizes
    don't explode when running the live-tests through the appgtt

v6: lots of improvements from Chris

v7: run on each engine for igt_write_huge
    add simple tmpfs fallback test

v8: size_t is bad
    don't break the i386 build

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-18-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-17-chris@chris-wilson.co.uk

drm/i915/debugfs: include some gtt page size metrics

Good to know, mostly for debugging purposes.

v2: some improvements from Chris

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-17-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-16-chris@chris-wilson.co.uk

drm/i915: accurate page size tracking for the ppgtt

Now that we support multiple page sizes for the ppgtt, it would be
useful to track the real usage for debugging purposes.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-16-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-15-chris@chris-wilson.co.uk

drm/i915: support 64K pages for the 48b PPGTT

Support inserting 64K pages into the 48b PPGTT.

v2: check for 64K scratch

v3: we should only have to re-adjust maybe_64K at every sg interval

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-15-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-14-chris@chris-wilson.co.uk

drm/i915: add support for 64K scratch page

Before we can fully enable 64K pages, we need to first support a 64K
scratch page if we intend to support the case where we have object sizes
< 2M, since any scratch PTE must also point to a 64K region.  Without
this our 64K usage is limited to objects which completely fill the
page-table, and therefore don't need any scratch.

v2: add reminder about why 48b PPGTT

Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-14-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-13-chris@chris-wilson.co.uk

drm/i915: support 2M pages for the 48b PPGTT

Support inserting 2M gtt pages into the 48b PPGTT.

v2: sanity check sg->length against page_size

v3: don't recalculate rem on each loop
    whitespace breakup

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-13-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-12-chris@chris-wilson.co.uk

drm/i915: disable GTT cache for 2M pages

When SW enables the use of 2M/1G pages, it must disable the GTT cache.

v2: don't disable for Cherryview which doesn't even support 48b PPGTT!

v3: explicitly check that the system does support 2M/1G pages

v4: split WA and decision logic

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-12-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-11-chris@chris-wilson.co.uk

drm/i915: enable IPS bit for 64K pages

Before we can enable 64K pages through the IPS bit, we must first enable
it through MMIO, otherwise the page-walker will simply ignore it.

v2: add comment mentioning that 64K is BDW+

v3: move to more suitable home

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-11-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-10-chris@chris-wilson.co.uk

drm/i915: align 64K objects to 2M

We can't mix 64K and 4K pte's in the same page-table, so for now we
align 64K objects to 2M to avoid any potential mixing. This is
potentially wasteful but in reality shouldn't be too bad since this only
applies to the virtual address space of a 48b PPGTT.

v2: don't separate logically connected ops

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-10-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-9-chris@chris-wilson.co.uk

drm/i915: align the vma start to the largest gtt page size

For the 48b PPGTT try to align the vma start address to the required
page size boundary to guarantee we use said page size in the gtt. If we
are dealing with multiple page sizes, we can't guarantee anything and
just align to the largest. For soft pinning and objects which need to be
tightly packed into the lower 32bits we don't force any alignment.

v2: various improvements suggested by Chris

v3: use set_pages and better placement of page_sizes

v4: prefer upper_32_bits()

v5: assign vma->page_sizes = vma->obj->page_sizes directly
    prefer sizeof(vma->page_sizes)

v6: fixup checking of end to exclude GGTT (which are assumed to be
    limited to 4G).

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-9-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-8-chris@chris-wilson.co.uk

drm/i915: introduce vm set_pages/clear_pages

Move the setting/clearing of the vma->pages to a vm operation. Doing so
neatens things up a little, but more importantly gives us a sane place
to also set/clear the vma->pages_sizes, which we introduce later in
preparation for supporting huge-pages.

v2: remove redundant vma->pages check

v3: GEM_BUG_ON(vma->pages) following i915_vma_remove

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-8-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-7-chris@chris-wilson.co.uk

drm/i915: introduce page_size members

In preparation for supporting huge gtt pages for the ppgtt, we introduce
page size members for gem objects.  We fill in the page sizes by
scanning the sg table.

v2: pass the sg_mask to set_pages

v3: calculate the sg_mask inline with populating the sg_table where
possible, and pass to set_pages along with the pages.

v4: bunch of improvements from Joonas

v5: fix num_pages blunder
    introduce i915_sg_page_sizes helper

v6: prefer GEM_BUG_ON(sizes == 0)

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-7-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-6-chris@chris-wilson.co.uk

drm/i915: push set_pages down to the callers

Each backend is now responsible for calling __i915_gem_object_set_pages
upon successfully gathering its backing storage. This eliminates the
inconsistency between the async and sync paths, which stands out even
more when we start throwing around an sg_mask in a later patch.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-6-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-5-chris@chris-wilson.co.uk

drm/i915: introduce page_sizes field to dev_info

In preparation for huge gtt pages expose page_sizes as part of the
device info, to indicate the page sizes supported by the HW.  Currently
only 4K is supported.

v2: s/page_size_mask/page_sizes/

v3: introduce I915_GTT_MAX_PAGE_SIZE

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-5-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-4-chris@chris-wilson.co.uk

drm/i915/gemfs: enable THP

Enable transparent-huge-pages through gemfs by mounting with
huge=within_size.

v2: sprinkle within_size comment

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-4-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-3-chris@chris-wilson.co.uk

drm/i915: introduce simple gemfs

Not a fully blown gemfs, just our very own tmpfs kernel mount. Doing so
moves us away from the shmemfs shm_mnt, and gives us the much needed
flexibility to do things like set our own mount options, namely huge=
which should allow us to enable the use of transparent-huge-pages for
our shmem backed objects.

v2: various improvements suggested by Joonas

v3: move gemfs instance to i915.mm and simplify now that we have
file_setup_with_mnt

v4: fallback to tmpfs shm_mnt upon failure to setup gemfs

v5: make tmpfs fallback kinder

v5: better gemfs failure message
    flags variable

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Hugh Dickins <hughd@google.com>
Cc: linux-mm@kvack.org
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-3-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-2-chris@chris-wilson.co.uk

mm/shmem: introduce shmem_file_setup_with_mnt

We are planning to use our own tmpfs mnt in i915 in place of the
shm_mnt, such that we can control the mount options, in particular
huge=, which we require to support huge-gtt-pages. So rather than roll
our own version of __shmem_file_setup, it would be preferred if we could
just give shmem our mnt, and let it do the rest.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Hugh Dickins <hughd@google.com>
Cc: linux-mm@kvack.org
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006145041.21673-2-matthew.auld@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221833.32439-1-chris@chris-wilson.co.uk

drm/i915/execlists: Add a comment for the extra MI_ARB_ENABLE

Michel Thierry noticed that we were applying WaDisableCtxRestoreArbitration
even to gen9, which does not require the w/a. The rationale is that we
need to enable MI arbitration for execlists to work, and to be safe we
do that before every batch (in addition to every context switch into the
batch). Since this is not clear from the single line comment suggesting
the MI_ARB_ENABLE is solely for the w/a, add a little more detail.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171005191005.13462-1-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>

drm/i915: Order two completing nop_submit_request

If two nop's (requests in-flight following a wedged device) complete at
the same time, the global_seqno value written to the HWSP is undefined
as the two threads are not serialized.

v2: Use irqsafe spinlock. We expect the callback may be called from
inside another irq spinlock, so we can't unconditionally restore irqs.

Fixes: ce1135c7de64 ("drm/i915: Complete requests in nop_submit_request")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006115617.18432-1-chris@chris-wilson.co.uk

drm/i915: Silence compiler warning for hsw_power_well_enable()

Not all compilers are able to determine that pg is guarded by wait_fuses
and so may think that pg is used uninitialized.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: b2891eb2531e ("drm/i915/hsw+: Add has_fuses power well attribute")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171002100416.25865-1-chris@chris-wilson.co.uk
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915: Try harder to finish the idle-worker

If a worker requeues itself, it may switch to a different kworker pool,
which flush_work() considers as complete. To be strict, we then need to
keep flushing the work until it is no longer pending.

References: https://bugs.freedesktop.org/show_bug.cgi?id=102456
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006104038.22337-1-chris@chris-wilson.co.uk

drm/i915: Fix pointer-to-int conversion

Commit faf654864b25 ("drm/i915: Unify uC variable types to avoid
flooding checkpatch.pl") breaks 32-bit kernel builds. Lets use
cast helper to make compiler happy.

v2: introduce ptr_to_u64 (Chris)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006130844.49012-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/huc: Fix includes in intel_huc.c

Fix includes order and make sure we only include required headers.
While here, make intel_huc.h header self-contained.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006090209.67852-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Unify uC variable types to avoid flooding checkpatch.pl

With the code motion mostly done, convert all the uC code away
from uint??_t at once (only a couple dozen variables), so that
reading the checkpatch.pl output should actually pinpoint if
a new uint??_t was accidentally introduced.

v2: - Include intel_uc_fw.h too (Sagar)

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006084940.15910-1-joonas.lahtinen@linux.intel.com

drm/i915: Don't use BIT() in UAPI section

Lets not introduce BIT() macro requirement for UAPI for now.

Fixes: 3fd3a6ffe279 ("drm/i915: Simplify i915_reg_read_ioctl")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006104559.17312-1-joonas.lahtinen@linux.intel.com

drm/i915: Use crtc_state_is_legacy_gamma in intel_color_check

crtc_state_is_legacy_gamma also checks for CTM, which was missing from
intel_color_check. By using the same condition for commit and check
we reduce the chance of mismatches.

This was spotted by KASAN while trying to rework kms_color igt test.

[   72.008660] ==================================================================
[   72.009326] BUG: KASAN: slab-out-of-bounds in bdw_load_gamma_lut.isra.3+0x15c/0x360 [i915]
[   72.009519] Read of size 2 at addr ffff880220216e50 by task kms_color/1158
[   72.009900] CPU: 2 PID: 1158 Comm: kms_color Tainted: G     U  W 4.14.0-rc3-patser+ #5281
[   72.009921] Hardware name: GIGABYTE GB-BKi3A-7100/MFLP3AP-00, BIOS F1 07/27/2016
[   72.009941] Call Trace:
[   72.009968]  dump_stack+0xc5/0x151
[   72.009996]  ? _atomic_dec_and_lock+0x10f/0x10f
[   72.010024]  ? show_regs_print_info+0x3c/0x3c
[   72.010072]  print_address_description+0x7f/0x240
[   72.010108]  kasan_report+0x216/0x370
[   72.010308]  ? bdw_load_gamma_lut.isra.3+0x15c/0x360 [i915]
[   72.010349]  __asan_load2+0x74/0x80
[   72.010552]  bdw_load_gamma_lut.isra.3+0x15c/0x360 [i915]
[   72.010772]  broadwell_load_luts+0x1f0/0x300 [i915]
[   72.010997]  intel_color_load_luts+0x36/0x40 [i915]
[   72.011205]  intel_begin_crtc_commit+0xa1/0x310 [i915]
[   72.011283]  drm_atomic_helper_commit_planes_on_crtc+0xa6/0x320 [drm_kms_helper]
[   72.011316]  ? wait_for_completion_io+0x460/0x460
[   72.011524]  intel_update_crtc+0xe3/0x100 [i915]
[   72.011720]  skl_update_crtcs+0x360/0x3f0 [i915]
[   72.011945]  ? intel_update_crtcs+0xf0/0xf0 [i915]
[   72.012010]  ? drm_atomic_helper_wait_for_dependencies+0x3d9/0x400 [drm_kms_helper]
[   72.012231]  intel_atomic_commit_tail+0x8db/0x1500 [i915]
[   72.012273]  ? __lock_is_held+0x9c/0xc0
[   72.012494]  ? skl_update_crtcs+0x3f0/0x3f0 [i915]
[   72.012518]  ? find_next_bit+0xb/0x10
[   72.012544]  ? cpumask_next+0x1a/0x20
[   72.012745]  ? i915_sw_fence_complete+0x9d/0xe0 [i915]
[   72.012938]  ? __i915_sw_fence_complete+0x5d0/0x5d0 [i915]
[   72.013176]  intel_atomic_commit+0x528/0x570 [i915]
[   72.013280]  ? drm_atomic_get_property+0xc00/0xc00 [drm]
[   72.013466]  ? intel_atomic_commit_tail+0x1500/0x1500 [i915]
[   72.013496]  ? kmem_cache_alloc_trace+0x266/0x280
[   72.013714]  ? intel_atomic_commit_tail+0x1500/0x1500 [i915]
[   72.013812]  drm_atomic_commit+0x77/0x80 [drm]
[   72.013911]  set_property_atomic+0x14a/0x210 [drm]
[   72.014015]  ? drm_object_property_get_value+0x70/0x70 [drm]
[   72.014080]  ? mutex_unlock+0xd/0x10
[   72.014292]  ? intel_atomic_commit_tail+0x1500/0x1500 [i915]
[   72.014379]  drm_mode_obj_set_property_ioctl+0x1cf/0x310 [drm]
[   72.014481]  ? drm_mode_obj_find_prop_id+0xa0/0xa0 [drm]
[   72.014510]  ? lock_release+0x6c0/0x6c0
[   72.014602]  ? drm_is_current_master+0x46/0x60 [drm]
[   72.014706]  drm_ioctl_kernel+0x148/0x1d0 [drm]
[   72.014799]  ? drm_mode_obj_find_prop_id+0xa0/0xa0 [drm]
[   72.014898]  ? drm_ioctl_permit+0x100/0x100 [drm]
[   72.014936]  ? kasan_check_write+0x14/0x20
[   72.015039]  drm_ioctl+0x441/0x660 [drm]
[   72.015129]  ? drm_mode_obj_find_prop_id+0xa0/0xa0 [drm]
[   72.015235]  ? drm_getstats+0x20/0x20 [drm]
[   72.015287]  ? ___might_sleep+0x159/0x340
[   72.015311]  ? find_held_lock+0xcf/0xf0
[   72.015341]  ? __schedule_bug+0x110/0x110
[   72.015405]  do_vfs_ioctl+0xa88/0xb10
[   72.015449]  ? ioctl_preallocate+0x1a0/0x1a0
[   72.015487]  ? selinux_capable+0x20/0x20
[   72.015525]  ? rcu_dynticks_momentary_idle+0x40/0x40
[   72.015607]  SyS_ioctl+0x4e/0x80
[   72.015647]  entry_SYSCALL_64_fastpath+0x18/0xad
[   72.015670] RIP: 0033:0x7ff74a3d04d7
[   72.015691] RSP: 002b:00007ffc594bec08 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[   72.015734] RAX: ffffffffffffffda RBX: ffffffff8718f54a RCX: 00007ff74a3d04d7
[   72.015756] RDX: 00007ffc594bec40 RSI: 00000000c01864ba RDI: 0000000000000003
[   72.015777] RBP: ffff880211c0ff98 R08: 0000000000000086 R09: 0000000000000000
[   72.015799] R10: 00007ff74a691b58 R11: 0000000000000246 R12: 0000000000000355
[   72.015821] R13: 00000000ff00eb00 R14: 0000000000000a00 R15: 00007ff746082000
[   72.015857]  ? trace_hardirqs_off_caller+0xfa/0x110

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171005141520.23990-1-maarten.lankhorst@linux.intel.com
[mlankhorst: s/crtc_state_is_legacy/&_gamma/ (danvet)]
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 82cf435b3134 ("drm/i915: Implement color management on bdw/skl/bxt/kbl")
Cc: <stable@vger.kernel.org> # v4.7+

drm/i915/crt: clean up encoder hook assignment

Only assign the hooks once instead of overwriting for DDI.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/796b631d018fdd5aa2a3608c6a9b9fa196a50f76.1507200657.git.jani.nikula@intel.com

drm/i915: push DDI FDI link training on enable to CRT encoder

Reduce encoder specific checks from CRTC code.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6903136894ffcf47f7511900f3c8d53f760ef6b1.1507200657.git.jani.nikula@intel.com

drm/i915: push DDI and DSI underrun reporting on enable to encoder

Simplify CRTC enable.

v2: Don't forget DSI (Daniel)

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1ad8f3ccaed99a5f03e3d53345221a25ad0be50f.1507200657.git.jani.nikula@intel.com

drm/i915: push DDI CRT underrun reporting on disable to encoder

CRT being the only PCH encoder, we can simplify the crtc disable by
pushing the PCH encoder specific parts to CRT encoder.

v2: add hsw_disable_crt (Daniel), rebase

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1ecbbb946f7b3782ee3d97f0ec2fe4758c349311.1507200657.git.jani.nikula@intel.com

drm/i915: push DDI CRT underrun reporting on enable to encoder

CRT being the only PCH encoder, we can simplify the crtc enable by
pushing the PCH encoder specific parts to CRT encoder.

v2: add separate hsw_enable_crt (Daniel), rebase

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b117fb524fc571837c83292194fc2ad35e588ec9.1507200657.git.jani.nikula@intel.com

drm/i915/uc: Unify initialization of the uC firmware helper

Unify initialization of the uC firmware helper as we want to
maximize code reuse.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004181343.66348-6-michal.wajdeczko@intel.com

drm/i915/uc: Fix includes order

Fix includes order and make sure we only include required headers.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004181343.66348-5-michal.wajdeczko@intel.com

drm/i915/guc: Move GuC core definitions into dedicated files

Move GuC core definitions into dedicated files as we want to
keep GuC specific code in separated files.

v2: move all functions in single patch (Joonas)
    fix old checkpatch issues (Sagar)

v3: rebased

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> #1
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004181343.66348-4-michal.wajdeczko@intel.com

drm/i915/guc: Move GuC submission declarations into dedicated header

Move GuC submission declarations into dedicated header as we want to
keep uC specific code in separate files.

v2: fix include (Chris)
    update commit message (Joonas)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: MichaĹ Winiarski <michal.winiarski@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004181343.66348-3-michal.wajdeczko@intel.com

drm/i915/guc: Move GuC log declarations into dedicated header

Move GuC log declarations into dedicated header as we want to
keep component specific code in separate files.

v2: fix includes (Chris)
    update commit message (Joonas)

Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004181343.66348-2-michal.wajdeczko@intel.com

drm/i915/cnl: Do not add an extra page for precaution in the Gen10 LRC size

BSpec indicates exactly 16752 DWORDs (17 pages), plus one page for PPHWSP. Please
notice that, when looking at the BSpec context image table, the right filter has
to be applied (e.g. "CNL") as some rows are excluded for specific GENs.

BSpec: 1383

v2: Update count and add BSpec tag (Joonas)
v3: Warning about filters in the commit message (Joonas)

Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Fixes: 7fd0b1a ("drm/i915/cnl: Add Gen10 LRC size")
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507131592-29209-1-git-send-email-oscar.mateo@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: avoid potential uninitialized variable use

One of the recent changes introduced a warning about
undefined behavior in the sanity checking:

drivers/gpu/drm/i915/intel_ddi.c: In function 'intel_ddi_hdmi_level':
drivers/gpu/drm/i915/intel_ddi.c:654:6: error: 'n_hdmi_entries' may be used uninitialized in this function [-Werror=maybe-uninitialized]

It seems that the new cnl specific get_buf_trans functions
can return uninitialized data if the voltage level is set
to an unexpected value. This changes the code to always return
'1' in that error case, which seems like the safest choice
as we use one less than the number as an array index later on.

Fixes: cc9cabfdec38 ("drm/i915/cnl: Move voltage check into ddi buf trans functions.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[danvet: shut up gcc comment added.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171005120835.437022-1-arnd@arndb.de

drm/i915/selftests: fix check for intel IOMMU

An earlier bugfix tried to work around this build failure:

drivers/gpu/drm/i915/selftests/mock_gem_device.c: In function 'mock_gem_device':
drivers/gpu/drm/i915/selftests/mock_gem_device.c:151:20: error: 'struct dev_archdata' has no member named 'iommu'

Checking for CONFIG_IOMMU_API is not sufficient as a compile-time
test since that may be enabled in configurations that have neither
INTEL_IOMMU not AMD_IOMMU enabled. This changes the check to
INTEL_IOMMU instead, as this is the only case we actually care about.

Fixes: f46f156ea770 ("drm/i915/selftests: Only touch archdata.iommu when it exists")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171005120749.400818-1-arnd@arndb.de

drm/i915/selftests: Remember to create the fake preempt context

For the fake device we have our own set of mock contexts that need to
match the real contexts we normally create. Currently this requires us
to manually instantiate them for the selftests, which I forgot.

Reported-by: Matthew Auld <matthew.william.auld@gmail.com>
Fixes: e7af3116836f ("drm/i915: Introduce a preempt context")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171005105927.22991-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>

drm/i915/edp: Increase the T12 delay quirk to 1300ms

For this specific PCI device, the eDP panel requires a higher panel
power cycle delay of 1300ms where the minimum spec requirement of panel
power cycle delay is 500ms. This fix in combination with correct
timestamp at which we get the panel power off time fixes the dP AUX CH
timeouts seen on various IGT tests.

Fixes: c99a259b4b5192ba ("drm/i915/edp: Add a T12 panel delay quirk to fix
DP AUX CH timeouts")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101144
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101518
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507073845-13420-2-git-send-email-manasi.d.navare@intel.com

drm/i915/edp: Get the Panel Power Off timestamp after panel is off

Kernel stores the time in jiffies at which the eDP panel is turned
off. This should be obtained after the panel is off (after the
wait_panel_off). When we next attempt to turn the panel on, we use the
difference between the timestamp at which we want to turn the panel on
and timestamp at which panel was turned off to ensure that this is equal
to panel power cycle delay and if not we wait for the remaining
time. Not waiting for the panel power cycle delay can cause the panel to
not turn on giving rise to AUX timeouts for the attempted AUX
transactions.

v2:
* Separate lines for bugzilla (Jani Nikula)
* Suggested by tag (Daniel Vetter)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101518
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101144
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507135706-17147-1-git-send-email-manasi.d.navare@intel.com

drm/i915/mst: Use MST sideband message transactions for dpms control

Use the POWER_DOWN_PHY and POWER_UP_PHY sideband message transactions to
set power states for downstream sinks. Apart from giving us the ability
to set power state for individual sinks, this fixes the below test for
me.

$ xrandr --display :0 --output DP-2-2-8 --off
$ xrandr --display :0 --output DP-2-2-1 --off
$ xrandr --display :0 --output DP-2-2-8 --auto #Black screen
$ xrandr --display :0 --output DP-2-2-1 --auto

v2: Modify and document the dpms and port disable order (Ville)
    Add comment explaining is_mst = !crtc_state equivalence(Ville, Maarten)

v3 by Jani: rebase

References: https://bugs.freedesktop.org/show_bug.cgi?id=90963
References: https://bugs.freedesktop.org/show_bug.cgi?id=88124
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude <lyude@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003142211.860-1-jani.nikula@intel.com

drm/i915/scheduler: Support user-defined priorities

Use a priority stored in the context as the initial value when
submitting a request. This allows us to change the default priority on a
per-context basis, allowing different contexts to be favoured with GPU
time at the expense of lower importance work. The user can adjust the
context's priority via I915_CONTEXT_PARAM_PRIORITY, with more positive
values being higher priority (they will be serviced earlier, after their
dependencies have been resolved). Any prerequisite work for an execbuf
will have its priority raised to match the new request as required.

Normal users can specify any value in the range of -1023 to 0 [default],
i.e. they can reduce the priority of their workloads (and temporarily
boost it back to normal if so desired).

Privileged users can specify any value in the range of -1023 to 1023,
[default is 0], i.e. they can raise their priority above all overs and
so potentially starve the system.

Note that the existing schedulers are not fair, nor load balancing, the
execution is strictly by priority on a first-come, first-served basis,
and the driver may choose to boost some requests above the range
available to users.

This priority was originally based around nice(2), but evolved to allow
clients to adjust their priority within a small range, and allow for a
privileged high priority range.

For example, this can be used to implement EGL_IMG_context_priority
https://www.khronos.org/registry/egl/extensions/IMG/EGL_IMG_context_priority.txt

EGL_CONTEXT_PRIORITY_LEVEL_IMG determines the priority level of
        the context to be created. This attribute is a hint, as an
        implementation may not support multiple contexts at some
        priority levels and system policy may limit access to high
        priority contexts to appropriate system privilege level. The
        default value for EGL_CONTEXT_PRIORITY_LEVEL_IMG is
        EGL_CONTEXT_PRIORITY_MEDIUM_IMG."

so we can map

PRIORITY_HIGH -> 1023 [privileged, will failback to 0]
PRIORITY_MED -> 0 [default]
PRIORITY_LOW -> -1023

They also map onto the priorities used by VkQueue (and a VkQueue is
essentially a timeline, our i915_gem_context under full-ppgtt).

v2: s/CAP_SYS_ADMIN/CAP_SYS_NICE/
v3: Report min/max user priorities as defines in the uapi, and rebase
internal priorities on the exposed values.

Testcase: igt/gem_exec_schedule
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-9-chris@chris-wilson.co.uk

drm/i915/execlists: Preemption!

When we write to ELSP, it triggers a context preemption at the earliest
arbitration point (3DPRIMITIVE, some PIPECONTROLs, a few other
operations and the explicit MI_ARB_CHECK). If this is to the same
context, it triggers a LITE_RESTORE where the RING_TAIL is merely
updated (used currently to chain requests from the same context
together, avoiding bubbles). However, if it is to a different context, a
full context-switch is performed and it will start to execute the new
context saving the image of the old for later execution.

Previously we avoided preemption by only submitting a new context when
the old was idle. But now we wish embrace it, and if the new request has
a higher priority than the currently executing request, we write to the
ELSP regardless, thus triggering preemption, but we tell the GPU to
switch to our special preemption context (not the target). In the
context-switch interrupt handler, we know that the previous contexts
have finished execution and so can unwind all the incomplete requests
and compute the new highest priority request to execute.

It would be feasible to avoid the switch-to-idle intermediate by
programming the ELSP with the target context. The difficulty is in
tracking which request that should be whilst maintaining the dependency
change, the error comes in with coalesced requests. As we only track the
most recent request and its priority, we may run into the issue of being
tricked in preempting a high priority request that was followed by a
low priority request from the same context (e.g. for PI); worse still
that earlier request may be our own dependency and the order then broken
by preemption. By injecting the switch-to-idle and then recomputing the
priority queue, we avoid the issue with tracking in-flight coalesced
requests. Having tried the preempt-to-busy approach, and failed to find
a way around the coalesced priority issue, Michal's original proposal to
inject an idle context (based on handling GuC preemption) succeeds.

The current heuristic for deciding when to preempt are only if the new
request is of higher priority, and has the privileged priority of
greater than 0. Note that the scheduler remains unfair!

v2: Disable for gen8 (bdw/bsw) as we need additional w/a for GPGPU.
Since, the feature is now conditional and not always available when we
have a scheduler, make it known via the HAS_SCHEDULER GETPARAM (now a
capability mask).
v3: Stylistic tweaks.
v4: Appease Joonas with a snippet of kerneldoc, only to fuel to fire of
the preempt vs preempting debate.

Suggested-by: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-8-chris@chris-wilson.co.uk

drm/i915: Expand I915_PARAM_HAS_SCHEDULER into a capability bitmask

In the next few patches, we wish to enable different features for the
scheduler, some which may subtlety change ABI (e.g. allow requests to be
reordered under different circumstances). So we need to make sure
userspace is cognizant of the changes (if they care), by which we employ
the usual method of a GETPARAM. We already have an
I915_PARAM_HAS_SCHEDULER (which notes the existing ability to reorder
requests to avoid bubbles), and now we wish to extend that to be a
bitmask to describe the different capabilities implemented.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-7-chris@chris-wilson.co.uk

drm/i915/execlists: Keep request->priority for its lifetime

With preemption, we will want to "unsubmit" a request, taking it back
from the hw and returning it to the priority sorted execution list. In
order to know where to insert it into that list, we need to remember
its adjust priority (which may change even as it was being executed).

This also affects reset for execlists as we are now unsubmitting the
requests following the reset (rather than directly writing the ELSP for
the inflight contexts). This turns reset into an accidental preemption
point, as after the reset we may choose a different pair of contexts to
submit to hw.

GuC is not updated as this series doesn't add preemption to the GuC
submission, and so it can keep benefiting from the early pruning of the
DFS inside execlists_schedule() for a little longer. We also need to
find a way of reducing the cost of that DFS...

v2: Include priority in error-state

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-6-chris@chris-wilson.co.uk

drm/i915/execlists: Move bdw GPGPU w/a to emit_bb

Move the re-enabling of MI arbitration from a per-bb w/a buffer to the
emission of the batch buffer itself.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-5-chris@chris-wilson.co.uk

drm/i915: Introduce a preempt context

Add another perma-pinned context for using for preemption at any time.
We cannot just reuse the existing kernel context, as first and foremost
we need to ensure that we can preempt the kernel context itself, so
require a distinct context id. Similar to the kernel context, we may
want to interrupt execution and switch to the preempt context at any
time, and so it needs to be permanently pinned and available.

To compensate for yet another permanent allocation, we shrink the
existing context and the new context by reducing their ringbuffer to the
minimum.

v2: Assert that we never allocate a request from the preemption context.
v3: Limit perma-pin to engines that may preempt.
v4: Onion cleanup for early driver death
v5: Onion ordering in main driver cleanup as well.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-4-chris@chris-wilson.co.uk

drm/i915/execlists: Distinguish the incomplete context notifies

Let the listener know that the context we just scheduled out was not
complete, and will be scheduled back in at a later point.

v2: Handle CONTEXT_STATUS_PREEMPTED in gvt by aliasing it to
CONTEXT_STATUS_OUT for the moment, gvt can expand upon the difference
later.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Zhenyu Wang" <zhenyuw@linux.intel.com>
Cc: "Wang, Zhi A" <zhi.a.wang@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-3-chris@chris-wilson.co.uk

drm/i915/preempt: Default to disabled mid-command preemption levels

Supporting fine-granularity preemption levels may require changes in
userspace batch buffer programming. Therefore, we need to fallback to
safe default values, rather that use hardware defaults. Userspace is
still able to enable fine-granularity, since we're whitelisting the
register controlling it in WaEnablePreemptionGranularityControlByUMD.

v2: Extend w/a to cover Cannonlake
v3: Fix commentary to include both fake w/a names.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-2-chris@chris-wilson.co.uk

drm/i915/preempt: Fix WaEnablePreemptionGranularityControlByUMD

The WA applies to all production Gen9 and requires both enabling and
whitelisting of the per-context preemption control register.

v2: Extend to Cannonlake.

Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-1-chris@chris-wilson.co.uk

drm/i915/guc: Move Guc early init into own function

We don't want to make aggregate uc functions to be too detailed.
This will also make future patch easier.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-7-michal.wajdeczko@intel.com

drm/i915/huc: Move HuC declarations into dedicated header

We want to keep each uC specific code in separate files.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-6-michal.wajdeczko@intel.com

drm/i915/uc: Move uC fw helper code into dedicated files

This is a prerequisite to unblock next steps.

v2: correct include order (Joonas)
v3: use common function prefix (Joonas)
    add kerneldoc (Michal)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-5-michal.wajdeczko@intel.com

drm/i915/uc: Create intel_uc_init_mmio

This patch adds new function intel_uc_init_mmio which will initialize
MMIO access related variables prior to uc load/init.

v2: Removed unnecessary export of guc_send_init_regs. Created
intel_uc_init_mmio that currently wraps guc_init_send_regs. (Michal)

v3 (Michal): add kerneldoc (Joonas)

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-4-michal.wajdeczko@intel.com

drm/i915/uc: Drop unnecessary forward declaration

We don't need it here.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-3-michal.wajdeczko@intel.com

drm/i915: Make intel_uncore.h header self-contained

We're trying to resolve inter-header dependencies.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-2-michal.wajdeczko@intel.com

drm/i915: Remove defunct trace points

trace_i915_gem_evict_everything and trace_i915_gem_ring_flush stopped
being used when their parent functions were removed.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003125055.11370-2-chris@chris-wilson.co.uk

drm/i915: Fix some tracepoints to capture full 64b

The tracepoints need some tlc, in particular we've neglected to update
them for the 64b era.

v2: Prefix hexadecimal output with 0x.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003125055.11370-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Remove WA_(SET|CLR)_BIT

These macros are of dubious merit when coupled with the per-context w/a
set. Instead of tweaking the value in the context, they tweak the value
based on the mmio at the time of recording; they are almost by
definition not per-context! Having removed the last users, remove the
macros to avoid temptation in the future.

v2: Kill WA_WRITE as well (now also unused).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004124153.14142-2-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

drm/i915: Move MMCD_MISC_CTRL from context w/a to standard

Looking at gem_workarounds shows us that MMCD_MISC_CTRL is not restored
following a suspend-resume cycle. This implies that MMCD_MISC_CTRL is
not stored in the context, but is an ordinary register w/a that we need to
restore during init_hw.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004124153.14142-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>