review.tizen.org Git - profile/common/kernel-common.git/log

ACPI / EC: Add asynchronous command byte write support

commit f92fca0060fc4dc9227342d0072d75df98c1e5a5 upstream.

Move the first command byte write into advance_transaction() so that all
EC register accesses that can affect the command processing state machine
can happen in this asynchronous state machine advancement function.

The advance_transaction() function then can be a complete implementation
of an asyncrhonous transaction for a single command so that:
1. The first command byte can be written in the interrupt context;
2. The command completion waiter can also be used to wait the first command
    byte's timeout;
3. In BURST mode, the follow-up command bytes can be written in the
    interrupt context directly, so that it doesn't need to return to the
    task context. Returning to the task context reduces the throughput of
    the BURST mode and in the worst cases where the system workload is very
    high, this leads to the hardware driven automatic BURST mode exit.

In order not to increase memory consumption, convert 'done' into 'flags'
to contain multiple indications:
1. ACPI_EC_COMMAND_COMPLETE: converting from original 'done' condition,
    indicating the completion of the command transaction.
2. ACPI_EC_COMMAND_POLL: indicating the availability of writing the first
    command byte. A new command can utilize this flag to compete for the
    right of accessing the underlying hardware. There is a follow-up bug
    fix that has utilized this new flag.

The 2 flags are important because it also reflects a key concept of IO
programs' design used in the system softwares. Normally an IO program
running in the kernel should first be implemented in the asynchronous way.
And the 2 flags are the most common way to implement its synchronous
operations on top of the asynchronous operations:
1. POLL: This flag can be used to block until the asynchronous operations
         can happen.
2. COMPLETE: This flag can be used to block until the asynchronous
             operations have completed.
By constructing code cleanly in this way, many difficult problems can be
solved smoothly.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891
Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931
Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911
Reported-and-tested-by: Gareth Williams <gareth@garethwilliams.me.uk>
Reported-and-tested-by: Hans de Goede <jwrdegoede@fedoraproject.org>
Reported-by: Barton Xu <tank.xuhan@gmail.com>
Tested-by: Steffen Weber <steffen.weber@gmail.com>
Tested-by: Arthur Chen <axchen@nvidia.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / EC: Avoid race condition related to advance_transaction()

commit 66b42b78bc1e816f92b662e8888c89195e4199e1 upstream.

The advance_transaction() will be invoked from the IRQ context GPE handler
and the task context ec_poll(). The handling of this function is locked so
that the EC state machine are ensured to be advanced sequentially.

But there is a problem. Before invoking advance_transaction(), EC_SC(R) is
read. Then for advance_transaction(), there could be race condition around
the lock from both contexts. The first one reading the register could fail
this race and when it passes the stale register value to the state machine
advancement code, the hardware condition is totally different from when
the register is read. And the hardware accesses determined from the wrong
hardware status can break the EC state machine. And there could be cases
that the functionalities of the platform firmware are seriously affected.
For example:
1. When 2 EC_DATA(W) writes compete the IBF=0, the 2nd EC_DATA(W) write may
    be invalid due to IBF=1 after the 1st EC_DATA(W) write. Then the
    hardware will either refuse to respond a next EC_SC(W) write of the next
    command or discard the current WR_EC command when it receives a EC_SC(W)
    write of the next command.
2. When 1 EC_SC(W) write and 1 EC_DATA(W) write compete the IBF=0, the
    EC_DATA(W) write may be invalid due to IBF=1 after the EC_SC(W) write.
    The next EC_DATA(R) could never be responded by the hardware. This is
    the root cause of the reported issue.

Fix this issue by moving the EC_SC(R) access into the lock so that we can
ensure that the state machine is advanced consistently.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=70891
Link: https://bugzilla.kernel.org/show_bug.cgi?id=63931
Link: https://bugzilla.kernel.org/show_bug.cgi?id=59911
Reported-and-tested-by: Gareth Williams <gareth@garethwilliams.me.uk>
Reported-and-tested-by: Hans de Goede <jwrdegoede@fedoraproject.org>
Reported-by: Barton Xu <tank.xuhan@gmail.com>
Tested-by: Steffen Weber <steffen.weber@gmail.com>
Tested-by: Arthur Chen <axchen@nvidia.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / resources: only reject zero length resources based at address zero

commit 867f9d463b82462793ea4610e748be0b04b37fc7 upstream.

The recently merged change (in v3.14-rc6) to ACPI resource detection
(below) causes all zero length ACPI resources to be elided from the
table:

  commit b355cee88e3b1a193f0e9a81db810f6f83ad728b
  Author: Zhang Rui <rui.zhang@intel.com>
  Date:   Thu Feb 27 11:37:15 2014 +0800

    ACPI / resources: ignore invalid ACPI device resources

This change has caused a regression in (at least) serial port detection
for a number of machines (see LP#1313981 [1]).  These seem to represent
their IO regions (presumably incorrectly) as a zero length region.
Reverting the above commit restores these serial devices.

Only elide zero length resources which lie at address 0.

Fixes: b355cee88e3b (ACPI / resources: ignore invalid ACPI device resources)
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ACPI / AC: Remove AC's proc directory."

commit e63f6e28dda6de3de2392ddca321e211fd860925 upstream.

Revert commit ab0fd674d6ce (ACPI / AC: Remove AC's proc directory.),
because some old tools (e.g. kpowersave from kde 3.5.10) are still
using /proc/acpi/ac_adapter.

Fixes: ab0fd674d6ce (ACPI / AC: Remove AC's proc directory.)
Reported-and-tested-by: Sorin Manolache <sorinm@gmail.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (adm1021) Fix cache problem when writing temperature limits

commit c024044d4da2c9c3b32933b4235df1e409293b84 upstream.

The module test script for the adm1021 driver exposes a cache problem
when writing temperature limits. temp_min and temp_max are expected
to be stored in milli-degrees C but are stored in degrees C.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (adm1029) Ensure the fan_div cache is updated in set_fan_div

commit 1035a9e3e9c76b64a860a774f5b867d28d34acc2 upstream.

Writing to fanX_div does not clear the cache. As a result, reading
from fanX_div may return the old value for up to two seconds
after writing a new value.

This patch ensures the fan_div cache is updated in set_fan_div().

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (adm1031) Fix writes to limit registers

commit 145e74a4e5022225adb84f4e5d4fff7938475c35 upstream.

Upper limit for write operations to temperature limit registers
was clamped to a fractional value. However, limit registers do
not support fractional values. As a result, upper limits of 127.5
degrees C or higher resulted in a rounded limit of 128 degrees C.
Since limit registers are signed, this was stored as -128 degrees C.
Clamp limits to (-55, +127) degrees C to solve the problem.

Value on writes to auto_temp[12]_min and auto_temp[12]_max were not
clamped at all, but masked. As a result, out-of-range writes resulted
in a more or less arbitrary limit. Clamp those attributes to (0, 127)
degrees C for more predictable results.

Cc: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (emc2103) Clamp limits instead of bailing out

commit f6c2dd20108c35e30e2c1f3c6142d189451a626b upstream.

It is customary to clamp limits instead of bailing out with an error
if a configured limit is out of the range supported by the driver.
This simplifies limit configuration, since the user will not typically
know chip and/or driver specific limits.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (amc6821) Fix permissions for temp2_input

commit df86754b746e9a0ff6f863f690b1c01d408e3cdc upstream.

temp2_input should not be writable, fix it.

Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: hwmon: Make the check for critical temp valid consistent

commit e8db5d6736a712a3e2280c0e31f4b301d85172d8 upstream.

On 05/21/2014 04:22 PM, Aaron Lu wrote:
> On 05/21/2014 01:57 PM, Kui Zhang wrote:
>> Hello,
>>
>> I get following error when rmmod thermal.
>>
>> rmmod thermal
>> Killed

While dealing with this problem, I found another problem that also
results in a kernel crash on thermal module removal:

From: Aaron Lu <aaron.lu@intel.com>
Date: Wed, 21 May 2014 16:05:38 +0800
Subject: thermal: hwmon: Make the check for critical temp valid consistent

We used the tz->ops->get_crit_temp && !tz->ops->get_crit_temp(tz, temp)
to decide if we need to create the temp_crit attribute file but we just
check if tz->ops->get_crit_temp exists to decide if we need to remove
that attribute file. Some ACPI thermal zone doesn't have a valid critical
trip point and that would result in removing a non-existent device file
on thermal module unload.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i8k: Fix non-SMP operation

commit 6d827fbcc370ca259a2905309f64161ab7b10596 upstream.

Commit f36fdb9f0266 (i8k: Force SMM to run on CPU 0) adds support
for multi-core CPUs to the driver. Unfortunately, that causes it
to fail loading if compiled without SMP support, at least on
32 bit kernels. Kernel log shows "i8k: unable to get SMM Dell
signature", and function i8k_smm is found to return -EINVAL.

Testing revealed that the culprit is the missing return value check
of set_cpus_allowed_ptr.

Fixes: f36fdb9f0266 (i8k: Force SMM to run on CPU 0)
Reported-by: Jim Bos <jim876@xs4all.nl>
Tested-by: Jim Bos <jim876@xs4all.nl>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Andreas Mohr <andi@lisas.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

workqueue: zero cpumask of wq_numa_possible_cpumask on init

commit 5a6024f1604eef119cf3a6fa413fe0261a81a8f3 upstream.

When hot-adding and onlining CPU, kernel panic occurs, showing following
call trace.

  BUG: unable to handle kernel paging request at 0000000000001d08
  IP: [<ffffffff8114acfd>] __alloc_pages_nodemask+0x9d/0xb10
  PGD 0
  Oops: 0000 [#1] SMP
  ...
  Call Trace:
   [<ffffffff812b8745>] ? cpumask_next_and+0x35/0x50
   [<ffffffff810a3283>] ? find_busiest_group+0x113/0x8f0
   [<ffffffff81193bc9>] ? deactivate_slab+0x349/0x3c0
   [<ffffffff811926f1>] new_slab+0x91/0x300
   [<ffffffff815de95a>] __slab_alloc+0x2bb/0x482
   [<ffffffff8105bc1c>] ? copy_process.part.25+0xfc/0x14c0
   [<ffffffff810a3c78>] ? load_balance+0x218/0x890
   [<ffffffff8101a679>] ? sched_clock+0x9/0x10
   [<ffffffff81105ba9>] ? trace_clock_local+0x9/0x10
   [<ffffffff81193d1c>] kmem_cache_alloc_node+0x8c/0x200
   [<ffffffff8105bc1c>] copy_process.part.25+0xfc/0x14c0
   [<ffffffff81114d0d>] ? trace_buffer_unlock_commit+0x4d/0x60
   [<ffffffff81085a80>] ? kthread_create_on_node+0x140/0x140
   [<ffffffff8105d0ec>] do_fork+0xbc/0x360
   [<ffffffff8105d3b6>] kernel_thread+0x26/0x30
   [<ffffffff81086652>] kthreadd+0x2c2/0x300
   [<ffffffff81086390>] ? kthread_create_on_cpu+0x60/0x60
   [<ffffffff815f20ec>] ret_from_fork+0x7c/0xb0
   [<ffffffff81086390>] ? kthread_create_on_cpu+0x60/0x60

In my investigation, I found the root cause is wq_numa_possible_cpumask.
All entries of wq_numa_possible_cpumask is allocated by
alloc_cpumask_var_node(). And these entries are used without initializing.
So these entries have wrong value.

When hot-adding and onlining CPU, wq_update_unbound_numa() is called.
wq_update_unbound_numa() calls alloc_unbound_pwq(). And alloc_unbound_pwq()
calls get_unbound_pool(). In get_unbound_pool(), worker_pool->node is set
as follow:

3592         /* if cpumask is contained inside a NUMA node, we belong to that node */
3593         if (wq_numa_enabled) {
3594                 for_each_node(node) {
3595                         if (cpumask_subset(pool->attrs->cpumask,
3596                                            wq_numa_possible_cpumask[node])) {
3597                                 pool->node = node;
3598                                 break;
3599                         }
3600                 }
3601         }

But wq_numa_possible_cpumask[node] does not have correct cpumask. So, wrong
node is selected. As a result, kernel panic occurs.

By this patch, all entries of wq_numa_possible_cpumask are allocated by
zalloc_cpumask_var_node to initialize them. And the panic disappeared.

Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: bce903809ab3 ("workqueue: add wq_numa_tbl_len and wq_numa_possible_cpumask[]")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpuset,mempolicy: fix sleeping function called from invalid context

commit 391acf970d21219a2a5446282d3b20eace0c0d7a upstream.

When runing with the kernel(3.15-rc7+), the follow bug occurs:
[ 9969.258987] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:586
[ 9969.359906] in_atomic(): 1, irqs_disabled(): 0, pid: 160655, name: python
[ 9969.441175] INFO: lockdep is turned off.
[ 9969.488184] CPU: 26 PID: 160655 Comm: python Tainted: G       A      3.15.0-rc7+ #85
[ 9969.581032] Hardware name: FUJITSU-SV PRIMEQUEST 1800E/SB, BIOS PRIMEQUEST 1000 Series BIOS Version 1.39 11/16/2012
[ 9969.706052]  ffffffff81a20e60 ffff8803e941fbd0 ffffffff8162f523 ffff8803e941fd18
[ 9969.795323]  ffff8803e941fbe0 ffffffff8109995a ffff8803e941fc58 ffffffff81633e6c
[ 9969.884710]  ffffffff811ba5dc ffff880405c6b480 ffff88041fdd90a0 0000000000002000
[ 9969.974071] Call Trace:
[ 9970.003403]  [<ffffffff8162f523>] dump_stack+0x4d/0x66
[ 9970.065074]  [<ffffffff8109995a>] __might_sleep+0xfa/0x130
[ 9970.130743]  [<ffffffff81633e6c>] mutex_lock_nested+0x3c/0x4f0
[ 9970.200638]  [<ffffffff811ba5dc>] ? kmem_cache_alloc+0x1bc/0x210
[ 9970.272610]  [<ffffffff81105807>] cpuset_mems_allowed+0x27/0x140
[ 9970.344584]  [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150
[ 9970.409282]  [<ffffffff811b1385>] __mpol_dup+0xe5/0x150
[ 9970.471897]  [<ffffffff811b1303>] ? __mpol_dup+0x63/0x150
[ 9970.536585]  [<ffffffff81068c86>] ? copy_process.part.23+0x606/0x1d40
[ 9970.613763]  [<ffffffff810bf28d>] ? trace_hardirqs_on+0xd/0x10
[ 9970.683660]  [<ffffffff810ddddf>] ? monotonic_to_bootbased+0x2f/0x50
[ 9970.759795]  [<ffffffff81068cf0>] copy_process.part.23+0x670/0x1d40
[ 9970.834885]  [<ffffffff8106a598>] do_fork+0xd8/0x380
[ 9970.894375]  [<ffffffff81110e4c>] ? __audit_syscall_entry+0x9c/0xf0
[ 9970.969470]  [<ffffffff8106a8c6>] SyS_clone+0x16/0x20
[ 9971.030011]  [<ffffffff81642009>] stub_clone+0x69/0x90
[ 9971.091573]  [<ffffffff81641c29>] ? system_call_fastpath+0x16/0x1b

The cause is that cpuset_mems_allowed() try to take
mutex_lock(&callback_mutex) under the rcu_read_lock(which was hold in
__mpol_dup()). And in cpuset_mems_allowed(), the access to cpuset is
under rcu_read_lock, so in __mpol_dup, we can reduce the rcu_read_lock
protection region to protect the access to cpuset only in
current_cpuset_is_being_rebound(). So that we can avoid this bug.

This patch is a temporary solution that just addresses the bug
mentioned above, can not fix the long-standing issue about cpuset.mems
rebinding on fork():

"When the forker's task_struct is duplicated (which includes
->mems_allowed) and it races with an update to cpuset_being_rebound
in update_tasks_nodemask() then the task's mems_allowed doesn't get
updated. And the child task's mems_allowed can be wrong if the
cpuset's nodemask changes before the child has been added to the
cgroup's tasklist."

Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

workqueue: fix dev_set_uevent_suppress() imbalance

commit bddbceb688c6d0decaabc7884fede319d02f96c8 upstream.

Uevents are suppressed during attributes registration, but never
restored, so kobject_uevent() does nothing.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 226223ab3c4118ddd10688cc2c131135848371ab
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc,metag: Do not hardcode maximum userspace stack size

commit 042d27acb64924a0e8a43e972485913a32407beb upstream.

This patch affects only architectures where the stack grows upwards
(currently parisc and metag only). On those do not hardcode the maximum
initial stack size to 1GB for 32-bit processes, but make it configurable
via a config option.

The main problem with the hardcoded stack size is, that we have two
memory regions which grow upwards: stack and heap. To keep most of the
memory available for heap in a flexmap memory layout, it makes no sense
to hard allocate up to 1GB of the memory for stack which can't be used
as heap then.

This patch makes the stack size for 32-bit processes configurable and
uses 80MB as default value which has been in use during the last few
years on parisc and which hasn't showed any problems yet.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: linux-parisc@vger.kernel.org
Cc: linux-metag@vger.kernel.org
Cc: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: fix fanotify_mark() syscall on 32bit compat kernel

commit ab8a261ba5e2dd9206da640de5870cc31d568a7c upstream.

On parisc we can not use the existing compat implementation for fanotify_mark()
because for the 64bit mask parameter the higher and lower 32bits are ordered
differently than what the compat function expects from big endian
architectures.

Specifically:
It finally turned out, that on hppa we end up with different assignments
of parameters to kernel arguments depending on if we call the glibc
wrapper function
int fanotify_mark (int __fanotify_fd, unsigned int __flags,
uint64_t __mask, int __dfd, const char *__pathname);
or directly calling the syscall manually
syscall(__NR_fanotify_mark, ...)

Reason is, that the syscall() function is implemented as C-function and
because we now have the sysno as first parameter in front of the other
parameters the compiler will unexpectedly add an empty paramenter in
front of the u64 value to ensure the correct calling alignment for 64bit
values.
This means, on hppa you can't simply use syscall() to call the kernel
fanotify_mark() function directly, but you have to use the glibc
function instead.

This patch fixes the kernel in the hppa-arch specifc coding to adjust
the parameters in a way as if userspace calls the glibc wrapper function
fanotify_mark().

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: add serial ports of C8000/1GHz machine to hardware database

commit eadcc7208a2237016be7bdff4551ba7614da85c8 upstream.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: ti_am335x_adc: Fix: Use same step id at FIFOs both ends

commit baa3c65298c089a9014b4e523a14ec2885cca1bc upstream.

Since AI lines could be selected at will (linux-3.11) the sending
and receiving ends of the FIFO does not agree about what step is used
for a line. It only works if the last lines are used, like 5,6,7,
and fails if ie 2,4,6 is selected in DT.

Signed-off-by: Jan Kardell <jan.kardell@telliq.com>
Tested-by: Zubair Lutfullah <zubair.lutfullah@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: Add Infineon Triboard

commit d8279a40e50ad55539780aa617a32a53d7f0953e upstream.

This adds support for Infineon TriBoard TC1798 [1]. Only interface 1
is used as serial line (see [2], Figure 8-6).

[1] http://www.infineon.com/cms/de/product/microcontroller/development-tools-software-and-kits/tricore-tm-development-tools-software-and-kits/starterkits-and-evaluation-boards/starter-kit-tc1798/channel.html?channel=db3a304333b8a7ca0133cfa3d73e4268
[2] http://www.infineon.com/dgdl/TriBoardManual-TC1798-V10.pdf?folderId=db3a304412b407950112b409ae7c0343&fileId=db3a304333b8a7ca0133cfae99fe426a

Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: ftdi_sio: Add extra PID.

commit 5a7fbe7e9ea0b1b9d7ffdba64db1faa3a259164c upstream.

This patch adds PID 0x0003 to the VID 0x128d (Testo). At least the
Testo 435-4 uses this, likely other gear as well.

Signed-off-by: Bert Vermeulen <bert@biot.com>
Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cp210x: add support for Corsair usb dongle

commit b9326057a3d8447f5d2e74a7b521ccf21add2ec0 upstream.

Corsair USB Dongles are shipped with Corsair AXi series PSUs.
These are cp210x serial usb devices, so make driver detect these.
I have a program, that can get information from these PSUs.

Tested with 2 different dongles shipped with Corsair AX860i and
AX1200i units.

Signed-off-by: Andras Kovacs <andras@sth.sze.hu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: option: Add ID for Telewell TW-LTE 4G v2

commit 3d28bd840b2d3981cd28caf5fe1df38f1344dd60 upstream.

Add ID of the Telewell 4G v2 hardware to option driver to get legacy
serial interface working

Signed-off-by: Bernd Wachter <bernd.wachter@jolla.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.14.12

mm: fix crashes from mbind() merging vmas

commit d05f0cdcbe6388723f1900c549b4850360545201 upstream.

In v2.6.34 commit 9d8cebd4bcd7 ("mm: fix mbind vma merge problem")
introduced vma merging to mbind(), but it should have also changed the
convention of passing start vma from queue_pages_range() (formerly
check_range()) to new_vma_page(): vma merging may have already freed
that structure, resulting in BUG at mm/mempolicy.c:1738 and probably
worse crashes.

Fixes: 9d8cebd4bcd7 ("mm: fix mbind vma merge problem")
Reported-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Tested-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sym53c8xx_2: Set DID_REQUEUE return code when aborting squeue

commit fd1232b214af43a973443aec6a2808f16ee5bf70 upstream.

This patch fixes I/O errors with the sym53c8xx_2 driver when the disk
returns QUEUE FULL status.

When the controller encounters an error (including QUEUE FULL or BUSY
status), it aborts all not yet submitted requests in the function
sym_dequeue_from_squeue.

This function aborts them with DID_SOFT_ERROR.

If the disk has full tag queue, the request that caused the overflow is
aborted with QUEUE FULL status (and the scsi midlayer properly retries
it until it is accepted by the disk), but the sym53c8xx_2 driver aborts
the following requests with DID_SOFT_ERROR --- for them, the midlayer
does just a few retries and then signals the error up to sd.

The result is that disk returning QUEUE FULL causes request failures.

The error was reproduced on 53c895 with COMPAQ BD03685A24 disk
(rebranded ST336607LC) with command queue 48 or 64 tags. The disk has
64 tags, but under some access patterns it return QUEUE FULL when there
are less than 64 pending tags. The SCSI specification allows returning
QUEUE FULL anytime and it is up to the host to retry.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

slab: fix oops when reading /proc/slab_allocators

commit 03787301420376ae41fbaf4267f4a6253d152ac5 upstream.

Commit b1cb0982bdd6 ("change the management method of free objects of
the slab") introduced a bug on slab leak detector
('/proc/slab_allocators').  This detector works like as following
decription.

1. traverse all objects on all the slabs.
2. determine whether it is active or not.
3. if active, print who allocate this object.

but that commit changed the way how to manage free objects, so the logic
determining whether it is active or not is also changed.  In before, we
regard object in cpu caches as inactive one, but, with this commit, we
mistakenly regard object in cpu caches as active one.

This intoduces kernel oops if DEBUG_PAGEALLOC is enabled.  If
DEBUG_PAGEALLOC is enabled, kernel_map_pages() is used to detect who
corrupt free memory in the slab.  It unmaps page table mapping if object
is free and map it if object is active.  When slab leak detector check
object in cpu caches, it mistakenly think this object active so try to
access object memory to retrieve caller of allocation.  At this point,
page table mapping to this object doesn't exist, so oops occurs.

Following is oops message reported from Dave.

It blew up when something tried to read /proc/slab_allocators
(Just cat it, and you should see the oops below)

  Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
  Modules linked in:
  [snip...]
  CPU: 1 PID: 9386 Comm: trinity-c33 Not tainted 3.14.0-rc5+ #131
  task: ffff8801aa46e890 ti: ffff880076924000 task.ti: ffff880076924000
  RIP: 0010:[<ffffffffaa1a8f4a>]  [<ffffffffaa1a8f4a>] handle_slab+0x8a/0x180
  RSP: 0018:ffff880076925de0  EFLAGS: 00010002
  RAX: 0000000000001000 RBX: 0000000000000000 RCX: 000000005ce85ce7
  RDX: ffffea00079be100 RSI: 0000000000001000 RDI: ffff880107458000
  RBP: ffff880076925e18 R08: 0000000000000001 R09: 0000000000000000
  R10: 0000000000000000 R11: 000000000000000f R12: ffff8801e6f84000
  R13: ffffea00079be100 R14: ffff880107458000 R15: ffff88022bb8d2c0
  FS:  00007fb769e45740(0000) GS:ffff88024d040000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffff8801e6f84ff8 CR3: 00000000a22db000 CR4: 00000000001407e0
  DR0: 0000000002695000 DR1: 0000000002695000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000070602
  Call Trace:
    leaks_show+0xce/0x240
    seq_read+0x28e/0x490
    proc_reg_read+0x3d/0x80
    vfs_read+0x9b/0x160
    SyS_read+0x58/0xb0
    tracesys+0xd4/0xd9
  Code: f5 00 00 00 0f 1f 44 00 00 48 63 c8 44 3b 0c 8a 0f 84 e3 00 00 00 83 c0 01 44 39 c0 72 eb 41 f6 47 1a 01 0f 84 e9 00 00 00 89 f0 <4d> 8b 4c 04 f8 4d 85 c9 0f 84 88 00 00 00 49 8b 7e 08 4d 8d 46
  RIP   handle_slab+0x8a/0x180

To fix the problem, I introduce an object status buffer on each slab.
With this, we can track object status precisely, so slab leak detector
would not access active object and no kernel oops would occur.  Memory
overhead caused by this fix is only imposed to CONFIG_DEBUG_SLAB_LEAK
which is mainly used for debugging, so memory overhead isn't big
problem.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/numa: Remove BUG_ON() in __handle_mm_fault()

commit 107437febd495a50e2cd09c81bbaa84d30e57b07 upstream.

Changing PTEs and PMDs to pte_numa & pmd_numa is done with the
mmap_sem held for reading, which means a pmd can be instantiated
and turned into a numa one while __handle_mm_fault() is examining
the value of old_pmd.

If that happens, __handle_mm_fault() should just return and let
the page fault retry, instead of throwing an oops. This is
handled by the test for pmd_trans_huge(*pmd) below.

Signed-off-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: Sunil Pandey <sunil.k.pandey@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: linux-mm@kvack.org
Cc: lwoodman@redhat.com
Cc: dave.hansen@intel.com
Link: http://lkml.kernel.org/r/20140429153615.2d72098e@annuminas.surriel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Patrick McLean <chutzpah@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/video/fbdev/fb-puv3.c: Add header files for function unifb_mmap

commit fbc6c4a13bbfb420eedfdb26a0a859f9c07e8a7b upstream.

Function unifb_mmap calls functions which are defined in linux/mm.h
and asm/pgtable.h

The related error (for unicore32 with unicore32_defconfig):
CC      drivers/video/fbdev/fb-puv3.o
drivers/video/fbdev/fb-puv3.c: In function 'unifb_mmap':
drivers/video/fbdev/fb-puv3.c:646: error: implicit declaration of
      function 'vm_iomap_memory'
drivers/video/fbdev/fb-puv3.c:646: error: implicit declaration of
      function 'pgprot_noncached'

Signed-off-by: Zhichuang Sun <sunzc522@gmail.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joe Perches <joe@perches.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-fbdev@vger.kernel.org
Acked-by: Xuetao Guan <gxt@mprc.pku.edu.cn>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/unicore32/mm/alignment.c: include "asm/pgtable.h" to avoid compiling error

commit 1ff38c56cbd095c4c0dfa581a859ba3557830f78 upstream.

Need include "asm/pgtable.h" to include "asm-generic/pgtable-nopmd.h",
so can let 'pmd_t' defined. The related error with allmodconfig:

    CC      arch/unicore32/mm/alignment.o
  In file included from arch/unicore32/mm/alignment.c:24:
  arch/unicore32/include/asm/tlbflush.h:135: error: expected .). before .*. token
  arch/unicore32/include/asm/tlbflush.h:154: error: expected .). before .*. token
  In file included from arch/unicore32/mm/alignment.c:27:
  arch/unicore32/mm/mm.h:15: error: expected .=., .,., .;., .sm. or ._attribute__. before .*. token
  arch/unicore32/mm/mm.h:20: error: expected .=., .,., .;., .sm. or ._attribute__. before .*. token
  arch/unicore32/mm/mm.h:25: error: expected .=., .,., .;., .sm. or ._attribute__. before .*. token
  make[1]: *** [arch/unicore32/mm/alignment.o] Error 1
  make: *** [arch/unicore32/mm] Error 2

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Acked-by: Xuetao Guan <gxt@mprc.pku.edu.cn>
Signed-off-by: Xuetao Guan <gxt@mprc.pku.edu.cn>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Prevent printk ratelimiting from spamming kernel log while DEBUG not defined

commit b7a7723513dc89f83d6df13206df55d4dc26e825 upstream.

This (widely used) construction:

if(printk_ratelimit())
dev_dbg()

Causes the ratelimiting to spam the kernel log with the "callbacks suppressed"
message below, even while the dev_dbg it is supposed to rate limit wouldn't
print anything because DEBUG is not defined for this device.

[  533.803964] retire_playback_urb: 852 callbacks suppressed
[  538.807930] retire_playback_urb: 852 callbacks suppressed
[  543.811897] retire_playback_urb: 852 callbacks suppressed
[  548.815745] retire_playback_urb: 852 callbacks suppressed
[  553.819826] retire_playback_urb: 852 callbacks suppressed

So use dev_dbg_ratelimited() instead of this construction.

Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Suppress repetitive debug messages from retire_playback_urb()

commit a5065eb6da55b226661456e6a7435f605df98111 upstream.

BugLink: http://bugs.launchpad.net/bugs/1305133
Malfunctioning or slow devices can cause a flood of dmesg SPAM.

I've ignored checkpatch.pl complaints about the use of printk_ratelimit() in favour
of prior art in sound/usb/pcm.c.

WARNING: Prefer printk_ratelimited or pr_<level>_ratelimited to printk_ratelimit
+ if (printk_ratelimit() &&

Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Eldad Zack <eldad@fogrefinery.com>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

audit: remove superfluous new- prefix in AUDIT_LOGIN messages

commit aa589a13b5d00d3c643ee4114d8cbc3addb4e99f upstream.

The new- prefix on ses and auid are un-necessary and break ausearch.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reported-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

aio: block io_destroy() until all context requests are completed

commit e02ba72aabfade4c9cd6e3263e9b57bf890ad25c upstream.

deletes aio context and all resources related to. It makes sense that
no IO operations connected to the context should be running after the context
is destroyed. As we removed io_context we have no chance to
get requests status or call io_getevents().

man page for io_destroy says that this function may block until
all context's requests are completed. Before kernel 3.11 io_destroy()
blocked indeed, but since aio refactoring in 3.11 it is not true anymore.

Here is a pseudo-code that shows a testcase for a race condition discovered
in 3.11:

  initialize io_context
  io_submit(read to buffer)
  io_destroy()

  // context is destroyed so we can free the resources
  free(buffers);

  // if the buffer is allocated by some other user he'll be surprised
  // to learn that the buffer still filled by an outstanding operation
  // from the destroyed io_context

The fix is straight-forward - add a completion struct and wait on it
in io_destroy, complete() should be called when number of in-fligh requests
reaches zero.

If two or more io_destroy() called for the same context simultaneously then
only the first one waits for IO completion, other calls behaviour is undefined.

Tested: ran http://pastebin.com/LrPsQ4RL testcase for several hours and
  do not see the race condition anymore.

Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: fix display power sw state reporting

commit b8c000d9bf23e7c1155ef421f595d1cbc25262da upstream.

Atm, we refcount both power domains and power wells and
intel_display_power_enabled_sw() returns the power domain refcount. What
the callers are really interested in though is the sw state of the
underlying power wells. Due to this we will report incorrectly that a
given power domain is off if its power wells were enabled via another
power domain, for example POWER_DOMAIN_INIT which enables all power
wells.

As a fix return instead the state based on the refcount of all power
wells included in the passed in power domain.

References: https://bugs.freedesktop.org/show_bug.cgi?id=79505
References: https://bugs.freedesktop.org/show_bug.cgi?id=79038
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: rtsx: add R1-no-CRC mmc command type handle

commit 5027251eced6e34315a52bd841279df957f627bb upstream.

a27fbf2f067b0cd ("mmc: add ignorance case for CMD13 CRC error") produced
a cmd.flags unhandled in realtek pci host driver. This will make MMC
card fail to initialize, this patch is used to handle the new cmd.flags
condition and MMC card can be used.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmfmac: Fix brcmf_chip_ai_coredisable not applying reset bits to BCMA_IOCTL

commit ffa216bb5eecfce0f01b0b2a95d5c320dde90005 upstream.

brcmfmac has been broken on my cubietruck with a BCM43362:

brcmfmac: brcmf_chip_recognition: found AXI chip: BCM43362, rev=1
brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0:
Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d

since commit 53036261033: "brcmfmac: update core reset and disable routines".

The problem is that since this commit brcmf_chip_ai_resetcore no longer sets
BCMA_IOCTL itself before bringing the core out of reset, instead relying on
brcmf_chip_ai_coredisable to do so. But brcmf_chip_ai_coredisable is a nop
of the chip is already in reset. This patch modifies brcmf_chip_ai_coredisable
to always set BCMA_IOCTL even if the core is already in reset.

This fixes brcmfmac hanging in firmware loading on my board.

Cc: stable@vger.kernel.org # v3.14
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[arend@broadcom.com: rebase patch on linux-3.14.y branch]
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_nat: fix oops on netns removal

commit 945b2b2d259d1a4364a2799e80e8ff32f8c6ee6f upstream.

Quoting Samu Kallio:

Basically what's happening is, during netns cleanup,
nf_nat_net_exit gets called before ipv4_net_exit. As I understand
it, nf_nat_net_exit is supposed to kill any conntrack entries which
have NAT context (through nf_ct_iterate_cleanup), but for some
reason this doesn't happen (perhaps something else is still holding
refs to those entries?).

When ipv4_net_exit is called, conntrack entries (including those
with NAT context) are cleaned up, but the
nat_bysource hashtable is long gone - freed in nf_nat_net_exit. The
bug happens when attempting to free a conntrack entry whose NAT hash
'prev' field points to a slot in the freed hash table (head for that
bin).

We ignore conntracks with null nat bindings. But this is wrong,
as these are in bysource hash table as well.

Restore nat-cleaning for the netns-is-being-removed case.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=65191

Fixes: c2d421e1718 ('netfilter: nf_nat: fix race when unloading protocol modules')
Reported-by: Samu Kallio <samu.kallio@aberdeencloud.com>
Debugged-by: Samu Kallio <samu.kallio@aberdeencloud.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Samu Kallio <samu.kallio@aberdeencloud.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: Correct INPCK handling

commit 66528f90669691c85c73bea4f0c9f4a5857c4cab upstream.

If INPCK is not set, input parity detection should be disabled. This means
parity errors should not be received from the tty driver, and the data
received should be treated normally.

SUS v3, 11.2.2, General Terminal Interface - Input Modes, states:
  "If INPCK is set, input parity checking shall be enabled. If INPCK is
   not set, input parity checking shall be disabled, allowing output parity
   generation without input parity errors. Note that whether input parity
   checking is enabled or disabled is independent of whether parity detection
   is enabled or disabled (see Control Modes). If parity detection is enabled
   but input parity checking is disabled, the hardware to which the terminal
   is connected shall recognize the parity bit, but the terminal special file
   shall not check whether or not this bit is correctly set."

Ignore parity errors reported by the tty driver when INPCK is not set, and
handle the received data normally.

Fixes: Bugzilla #71681, 'Improvement of n_tty_receive_parity_error from n_tty.c'
Reported-by: Ivan <athlon_@mail.ru>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: Fix IGNBRK handling

commit ef8b9ddcb45fa3b1e11acd72be2398001e807d14 upstream.

If IGNBRK is set without either BRKINT or PARMRK set, some uart
drivers send a 0x00 byte for BREAK without the TTYBREAK flag to the
line discipline, when it should send either nothing or the TTYBREAK flag
set. This happens because the read_status_mask masks out the BI
condition, which uart_insert_char() then interprets as a normal 0x00 byte.

SUS v3 is clear regarding the meaning of IGNBRK; Section 11.2.2, General
Terminal Interface - Input Modes, states:
  "If IGNBRK is set, a break condition detected on input shall be ignored;
   that is, not put on the input queue and therefore not read by any
   process."

Fix read_status_mask to include the BI bit if IGNBRK is set; the
lsr status retains the BI bit if a BREAK is recv'd, which is
subsequently ignored in uart_insert_char() when masked with the
ignore_status_mask.

Affected drivers:
8250 - all
serial_txx9
mfd
amba-pl010
amba-pl011
atmel_serial
bfin_uart
dz
ip22zilog
max310x
mxs-auart
netx-serial
pnx8xxx_uart
pxa
sb1250-duart
sccnxp
serial_ks8695
sirfsoc_uart
st-asc
vr41xx_siu
zs
sunzilog
fsl_lpuart
sunsab
ucc_uart
bcm63xx_uart
sunsu
efm32-uart
pmac_zilog
mpsc
msm_serial
m32r_sio

Unaffected drivers:
omap-serial
rp2
sa1100
imx
icom

Annotated for fixes:
altera_uart
mcf

Drivers without break detection:
21285
xilinx-uartps
altera_jtaguart
apbuart
arc-uart
clps711x
max3100
uartlite
msm_serial_hs
nwpserial
lantiq
vt8500_serial

Unknown:
samsung
mpc52xx_uart
bfin_sport_uart
cpm_uart/core

Fixes: Bugzilla #71651, '8250_core.c incorrectly handles IGNBRK flag'
Reported-by: Ivan <athlon_@mail.ru>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: qcom: Fix mmcc-8974's PLL configurations

commit 437ae6a1b8f2eedebfbf0f6572e19ca5c58a3f71 upstream.

We forgot to add the status bit for the PLLs and we were using
the wrong register and masks for configuration, leading to
unexpected PLL configurations. Fix this.

Fixes: d8b212014e69 (clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC))
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: qcom: Fix clk_rcg2_is_enabled() check

commit aa014149ba002155a084ec1e9328e95b70167cbb upstream.

If the bit is set the clock is off so we should be checking for
a clear bit, not a set bit. Invert the logic.

Fixes: bcd61c0f535a (clk: qcom: Add support for root clock generators (RCGs))
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mlx4_core: Fix incorrect FLAGS1 bitmap test in mlx4_QUERY_FUNC_CAP

commit bc82878baa10c2a6a4a6affaf52c152935112142 upstream.

Commit eb17711bc1d6 ("net/mlx4_core: Introduce nic_info new flag in
QUERY_FUNC_CAP") did:

if (func_cap->flags1 & QUERY_FUNC_CAP_FLAGS1_OFFSET) {

which should be:

if (func_cap->flags1 & QUERY_FUNC_CAP_FLAGS1_FORCE_VLAN) {

Fix that.

Fixes: eb17711bc1d6 ("net/mlx4_core: Introduce nic_info new flag in QUERY_FUNC_CAP")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: page_alloc: fix CMA area initialisation when pageblock > MAX_ORDER

commit dc78327c0ea7da5186d8cbc1647bd6088c5c9fa5 upstream.

With a kernel configured with ARM64_64K_PAGES && !TRANSPARENT_HUGEPAGE,
the following is triggered at early boot:

  SMP: Total of 8 processors activated.
  devtmpfs: initialized
  Unable to handle kernel NULL pointer dereference at virtual address 00000008
  pgd = fffffe0000050000
  [00000008] *pgd=00000043fba00003, *pmd=00000043fba00003, *pte=00e0000078010407
  Internal error: Oops: 96000006 [#1] SMP
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-rc864k+ #44
  task: fffffe03bc040000 ti: fffffe03bc080000 task.ti: fffffe03bc080000
  PC is at __list_add+0x10/0xd4
  LR is at free_one_page+0x270/0x638
  ...
  Call trace:
    __list_add+0x10/0xd4
    free_one_page+0x26c/0x638
    __free_pages_ok.part.52+0x84/0xbc
    __free_pages+0x74/0xbc
    init_cma_reserved_pageblock+0xe8/0x104
    cma_init_reserved_areas+0x190/0x1e4
    do_one_initcall+0xc4/0x154
    kernel_init_freeable+0x204/0x2a8
    kernel_init+0xc/0xd4

This happens because init_cma_reserved_pageblock() calls
__free_one_page() with pageblock_order as page order but it is bigger
than MAX_ORDER.  This in turn causes accesses past zone->free_list[].

Fix the problem by changing init_cma_reserved_pageblock() such that it
splits pageblock into individual MAX_ORDER pages if pageblock is bigger
than a MAX_ORDER page.

In cases where !CONFIG_HUGETLB_PAGE_SIZE_VARIABLE, which is all
architectures expect for ia64, powerpc and tile at the moment, the
â\80\9cpageblock_order > MAX_ORDERâ\80\9d condition will be optimised out since both
sides of the operator are constants.  In cases where pageblock size is
variable, the performance degradation should not be significant anyway
since init_cma_reserved_pageblock() is called only at boot time at most
MAX_CMA_AREAS times which by default is eight.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Reported-by: Mark Salter <msalter@redhat.com>
Tested-by: Mark Salter <msalter@redhat.com>
Tested-by: Christopher Covington <cov@codeaurora.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip: spear_shirq: Fix interrupt offset

commit 4f4366033945419b0c52118c29d3057d7c558765 upstream.

The ras3 block on spear320 claims to have 3 interrupts. In fact it has
one and 6 reserved interrupts. Account the 6 reserved to this block so
it has 7 interrupts total. That matches the datasheet and the device
tree entries.

Broken since commit 80515a5a(ARM: SPEAr3xx: shirq: simplify and move
the shared irq multiplexor to DT). Testing is overrated....

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20140619212712.872379208@linutronix.de
Fixes: 80515a5a2e3c ('ARM: SPEAr3xx: shirq: simplify and move the shared irq multiplexor to DT')
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: flush writes before starting a recovery.

commit 133d4527eab8d199a62eee6bd433f0776842df2e upstream.

When we write to a degraded array which has a bitmap, we
make sure the relevant bit in the bitmap remains set when
the write completes (so a 're-add' can quickly rebuilt a
temporarily-missing device).

If, immediately after such a write starts, we incorporate a spare,
commence recovery, and skip over the region where the write is
happening (because the 'needs recovery' flag isn't set yet),
then that write will not get to the new device.

Once the recovery finishes the new device will be trusted, but will
have incorrect data, leading to possible corruption.

We cannot set the 'needs recovery' flag when we start the write as we
do not know easily if the write will be "degraded" or not. That
depends on details of the particular raid level and particular write
request.

This patch fixes a corruption issue of long standing and so it
suitable for any -stable kernel. It applied correctly to 3.0 at
least and will minor editing to earlier kernels.

Reported-by: Bill <billstuff2001@sbcglobal.net>
Tested-by: Bill <billstuff2001@sbcglobal.net>
Link: http://lkml.kernel.org/r/53A518BB.60709@sbcglobal.net
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Remove ftrace_stop/start() from reading the trace file

commit 099ed151675cd1d2dbeae1dac697975f6a68716d upstream.

Disabling reading and writing to the trace file should not be able to
disable all function tracing callbacks. There's other users today
(like kprobes and perf). Reading a trace file should not stop those
from happening.

Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools: ffs-test: fix header values endianess

commit f35f71244da6e51db4e1f2c7e318581f498ececf upstream.

It appears that no one ever run ffs-test on a big-endian machine,
since it used cpu-endianess for fs_count and hs_count fields which
should be in little-endian format. Fix by wrapping the numbers in
cpu_to_le32.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: fix rare symlink decoding bug

commit 76f47128f9b33af1e96819746550d789054c9664 upstream.

An NFS operation that creates a new symlink includes the symlink data,
which is xdr-encoded as a length followed by the data plus 0 to 3 bytes
of zero-padding as required to reach a 4-byte boundary.

The vfs, on the other hand, wants null-terminated data.

The simple way to handle this would be by copying the data into a newly
allocated buffer with space for the final null.

The current nfsd_symlink code tries to be more clever by skipping that
step in the (likely) case where the byte following the string is already
0.

But that assumes that the byte following the string is ours to look at.
In fact, it might be the first byte of a page that we can't read, or of
some object that another task might modify.

Worse, the NFSv4 code tries to fix the problem by actually writing to
that byte.

In the NFSv2/v3 cases this actually appears to be safe:

- nfs3svc_decode_symlinkargs explicitly null-terminates the data
  (after first checking its length and copying it to a new
  page).
- NFSv2 limits symlinks to 1k.  The buffer holding the rpc
  request is always at least a page, and the link data (and
  previous fields) have maximum lengths that prevent the request
  from reaching the end of a page.

In the NFSv4 case the CREATE op is potentially just one part of a long
compound so can end up on the end of a page if you're unlucky.

The minimal fix here is to copy and null-terminate in the NFSv4 case.
The nfsd_symlink() interface here seems too fragile, though.  It should
really either do the copy itself every time or just require a
null-terminated string.

Reported-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio/ad7291: fix error code in ad7291_probe()

commit b70e19c222a64018d308ebc80333575aff9f4e51 upstream.

We should be returning a negative error code instead of success here.

This would have been detected by GCC, except that the "ret" variable was
initialized with a bogus value to disable GCC's uninitialized variable
warnings. I've cleaned that up, as well.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: of_iio_channel_get_by_name() returns non-null pointers for error legs

commit a2c12493ed7e63a18cef33a71686d12ffcd6600e upstream.

Currently in the inkern.c code for IIO framework, the function
of_iio_channel_get_by_name() will return a non-NULL pointer when
it cannot find a channel using of_iio_channel_get() and when it
tries to search for 'io-channel-ranges' property and fails. This
is incorrect behaviour as the function which calls this expects
a NULL pointer for failure. This patch rectifies the issue.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: fix wrong address when writing Hyper-V tsc page

commit e1fa108d24697b78348fd4e5a531029a50d0d36d upstream.

When kvm_write_guest writes the tsc_ref structure to the guest, or it will lead
the low HV_X64_MSR_TSC_REFERENCE_ADDRESS_SHIFT bits of the TSC page address
must be cleared, or the guest can see a non-zero sequence number.

Otherwise Windows guests would not be able to get a correct clocksource
(QueryPerformanceCounter will always return 0) which causes serious chaos.

Signed-off-by: Xiaoming Gao <newtongao@tencnet.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: preserve the high 32-bits of the PAT register

commit 7cb060a91c0efc5ff94f83c6df3ed705e143cdb9 upstream.

KVM does not really do much with the PAT, so this went unnoticed for a
long time. It is exposed however if you try to do rdmsr on the PAT
register.

Reported-by: Valentine Sinitsyn <valentine.sinitsyn@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Increase the number of fixed MTRR regs to 10

commit 682367c494869008eb89ef733f196e99415ae862 upstream.

Recent Intel CPUs have 10 variable range MTRRs. Since operating systems
sometime make assumptions on CPUs while they ignore capability MSRs, it is
better for KVM to be consistent with recent CPUs. Reporting more MTRRs than
actually supported has no functional implications.

Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: Fix hole punching for files with indirect blocks

commit a93cd4cf86466caa49cfe64607bea7f0bde3f916 upstream.

Hole punching code for files with indirect blocks wrongly computed
number of blocks which need to be cleared when traversing the indirect
block tree. That could result in punching more blocks than actually
requested and thus effectively cause a data loss. For example:

fallocate -n -p 10240000 4096

will punch the range 10240000 - 12632064 instead of the range 1024000 -
10244096. Fix the calculation.

Fixes: 8bad6fc813a3a5300f51369c39d315679fd88c72
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: Fix buffer double free in ext4_alloc_branch()

commit c5c7b8ddfbf8cb3b2291e515a34ab1b8982f5a2d upstream.

Error recovery in ext4_alloc_branch() calls ext4_forget() even for
buffer corresponding to indirect block it did not allocate. This leads
to brelse() being called twice for that buffer (once from ext4_forget()
and once from cleanup in ext4_ind_map_blocks()) leading to buffer use
count misaccounting. Eventually (but often much later because there
are other users of the buffer) we will see messages like:
VFS: brelse: Trying to free free buffer

Another manifestation of this problem is an error:
JBD2 unexpected failure: jbd2_journal_revoke: !buffer_revoked(bh);
inconsistent data on disk

The fix is easy - don't forget buffer we did not allocate. Also add an
explanatory comment because the indexing at ext4_alloc_branch() is
somewhat subtle.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blkcg: fix use-after-free in __blkg_release_rcu() by making blkcg_gq refcnt an atomic_t

commit a5049a8ae34950249a7ae94c385d7c5c98914412 upstream.

Hello,

So, this patch should do.  Joe, Vivek, can one of you guys please
verify that the oops goes away with this patch?

Jens, the original thread can be read at

  http://thread.gmane.org/gmane.linux.kernel/1720729

The fix converts blkg->refcnt from int to atomic_t.  It does some
overhead but it should be minute compared to everything else which is
going on and the involved cacheline bouncing, so I think it's highly
unlikely to cause any noticeable difference.  Also, the refcnt in
question should be converted to a perpcu_ref for blk-mq anyway, so the
atomic_t is likely to go away pretty soon anyway.

Thanks.

------- 8< -------
__blkg_release_rcu() may be invoked after the associated request_queue
is released with a RCU grace period inbetween.  As such, the function
and callbacks invoked from it must not dereference the associated
request_queue.  This is clearly indicated in the comment above the
function.

Unfortunately, while trying to fix a different issue, 2a4fd070ee85
("blkcg: move bulk of blkcg_gq release operations to the RCU
callback") ignored this and added [un]locking of @blkg->q->queue_lock
to __blkg_release_rcu().  This of course can cause oops as the
request_queue may be long gone by the time this code gets executed.

  general protection fault: 0000 [#1] SMP
  CPU: 21 PID: 30 Comm: rcuos/21 Not tainted 3.15.0 #1
  Hardware name: Stratus ftServer 6400/G7LAZ, BIOS BIOS Version 6.3:57 12/25/2013
  task: ffff880854021de0 ti: ffff88085403c000 task.ti: ffff88085403c000
  RIP: 0010:[<ffffffff8162e9e5>]  [<ffffffff8162e9e5>] _raw_spin_lock_irq+0x15/0x60
  RSP: 0018:ffff88085403fdf0  EFLAGS: 00010086
  RAX: 0000000000020000 RBX: 0000000000000010 RCX: 0000000000000000
  RDX: 000060ef80008248 RSI: 0000000000000286 RDI: 6b6b6b6b6b6b6b6b
  RBP: ffff88085403fdf0 R08: 0000000000000286 R09: 0000000000009f39
  R10: 0000000000020001 R11: 0000000000020001 R12: ffff88103c17a130
  R13: ffff88103c17a080 R14: 0000000000000000 R15: 0000000000000000
  FS:  0000000000000000(0000) GS:ffff88107fca0000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00000000006e5ab8 CR3: 000000000193d000 CR4: 00000000000407e0
  Stack:
   ffff88085403fe18 ffffffff812cbfc2 ffff88103c17a130 0000000000000000
   ffff88103c17a130 ffff88085403fec0 ffffffff810d1d28 ffff880854021de0
   ffff880854021de0 ffff88107fcaec58 ffff88085403fe80 ffff88107fcaec30
  Call Trace:
   [<ffffffff812cbfc2>] __blkg_release_rcu+0x72/0x150
   [<ffffffff810d1d28>] rcu_nocb_kthread+0x1e8/0x300
   [<ffffffff81091d81>] kthread+0xe1/0x100
   [<ffffffff8163813c>] ret_from_fork+0x7c/0xb0
  Code: ff 47 04 48 8b 7d 08 be 00 02 00 00 e8 55 48 a4 ff 5d c3 0f 1f 00 66 66 66 66 90 55 48 89 e5
  +fa 66 66 90 66 66 90 b8 00 00 02 00 <f0> 0f c1 07 89 c2 c1 ea 10 66 39 c2 75 02 5d c3 83 e2 fe 0f
  +b7
  RIP  [<ffffffff8162e9e5>] _raw_spin_lock_irq+0x15/0x60
   RSP <ffff88085403fdf0>

The request_queue locking was added because blkcg_gq->refcnt is an int
protected with the queue lock and __blkg_release_rcu() needs to put
the parent.  Let's fix it by making blkcg_gq->refcnt an atomic_t and
dropping queue locking in the function.

Given the general heavy weight of the current request_queue and blkcg
operations, this is unlikely to cause any noticeable overhead.
Moreover, blkcg_gq->refcnt is likely to be converted to percpu_ref in
the near future, so whatever (most likely negligible) overhead it may
add is temporary.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Joe Lawrence <joe.lawrence@stratus.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Link: http://lkml.kernel.org/g/alpine.DEB.2.02.1406081816540.17948@jlaw-desktop.mno.stratus.com
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CIFS: fix mount failure with broken pathnames when smb3 mount with mapchars option

commit ce36d9ab3bab06b7b5522f5c8b68fac231b76ffb upstream.

When we SMB3 mounted with mapchars (to allow reserved characters : \ / > < * ?
via the Unicode Windows to POSIX remap range) empty paths
(eg when we open "" to query the root of the SMB3 directory on mount) were not
null terminated so we sent garbarge as a path name on empty paths which caused
SMB2/SMB2.1/SMB3 mounts to fail when mapchars was specified. mapchars is
particularly important since Unix Extensions for SMB3 are not supported (yet)

Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/cifs: fix regression in cifs_create_mf_symlink()

commit a1d0b84c308d7fdfb67eb76498116a6c2fdda507 upstream.

commit d81b8a40e2ece0a9ab57b1fe1798e291e75bf8fc
("CIFS: Cleanup cifs open codepath")
changed disposition to FILE_OPEN.

Signed-off-by: Björn Baumbach <bb@sernet.de>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Cc: Pavel Shilovsky <piastry@etersoft.ru>
Cc: Steve French <sfrench@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

b43: fix frequency reported on G-PHY with /new/ firmware

commit 2fc68eb122c7ea6cd5be1fe7d6650c0beb2f4f40 upstream.

Support for firmware rev 508+ was added years ago, but we never noticed
it reports channel in a different way for G-PHY devices. Instead of
offset from 2400 MHz it simply passes channel id (AKA hw_value).

So far it was (most probably) affecting monitor mode users only, but
the following recent commit made it noticeable for quite everybody:

commit 3afc2167f60a327a2c1e1e2600ef209a3c2b75b7
Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Tue Mar 4 16:50:13 2014 +0200

cfg80211/mac80211: ignore signal if the frame was heard on wrong channel

Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: allwinner: emac: Add missing free_irq

commit b91113282bf44df46aba374a0b8f88a75bfd4b3f upstream.

If the mdio probe function fails in emac_open, the interrupt we just requested
isn't freed. If emac_open is called again, for example because we try to set up
the interface again, the kernel will oops because the interrupt wasn't properly
released.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: Bug fix in stack alignment exception

commit 3906c2b53cd23c2ae03e6ce41432c8e7f0a3cbbb upstream.

The value of ESR has been stored into x1, and should be directly pass to
do_sp_pc_abort function, "MOV x1, x25" is an extra operation and do_sp_pc_abort
will get the wrong value of ESR.

Signed-off-by: ChiaHao <andy.jhshiu@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: OMAP2+: Fix parser-bug in platform muxing code

commit c021f241f4fab2bb4fc4120a38a828a03dd3f970 upstream.

Fix a parser-bug in the omap2 muxing code where muxtable-entries will be
wrongly selected if the requested muxname is a *prefix* of their
m0-entry and they have a matching mN-entry. Fix by additionally checking
that the length of the m0_entry is equal.

For example muxing of "dss_data2.dss_data2" on omap32xx will fail
because the prefix "dss_data2" will match the mux-entries "dss_data2" as
well as "dss_data20", with the suffix "dss_data2" matching m0 (for
dss_data2) and m4 (for dss_data20). Thus both are recognized as signal
path candidates:

Relevant muxentries from mux34xx.c:
        _OMAP3_MUXENTRY(DSS_DATA20, 90,
                "dss_data20", NULL, "mcspi3_somi", "dss_data2",
                "gpio_90", NULL, NULL, "safe_mode"),
        _OMAP3_MUXENTRY(DSS_DATA2, 72,
                "dss_data2", NULL, NULL, NULL,
                "gpio_72", NULL, NULL, "safe_mode"),

This will result in a failure to mux the pin at all:

_omap_mux_get_by_name: Multiple signal paths (2) for dss_data2.dss_data2

Patch should apply to linus' latest master down to rather old linux-2.6
trees.

Signed-off-by: David R. Piegdon <lkml@p23q.org>
Cc: stable@vger.kernel.org
[tony@atomide.com: updated description to include full description]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: mm: Make icache synchronisation logic huge page aware

commit 923b8f5044da753e4985ab15c1374ced2cdf616c upstream.

The __sync_icache_dcache routine will only flush the dcache for the
first page of a compound page, potentially leading to stale icache
data residing further on in a hugetlb page.

This patch addresses this issue by taking into consideration the
order of the page when flushing the dcache.

Reported-by: Mark Brown <broonie@linaro.org>
Tested-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, pcp: allow restoring percpu_pagelist_fraction default

commit 7cd2b0a34ab8e4db971920eef8982f985441adfb upstream.

Oleg reports a division by zero error on zero-length write() to the
percpu_pagelist_fraction sysctl:

    divide error: 0000 [#1] SMP DEBUG_PAGEALLOC
    CPU: 1 PID: 9142 Comm: badarea_io Not tainted 3.15.0-rc2-vm-nfs+ #19
    Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
    task: ffff8800d5aeb6e0 ti: ffff8800d87a2000 task.ti: ffff8800d87a2000
    RIP: 0010: percpu_pagelist_fraction_sysctl_handler+0x84/0x120
    RSP: 0018:ffff8800d87a3e78  EFLAGS: 00010246
    RAX: 0000000000000f89 RBX: ffff88011f7fd000 RCX: 0000000000000000
    RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000010
    RBP: ffff8800d87a3e98 R08: ffffffff81d002c8 R09: ffff8800d87a3f50
    R10: 000000000000000b R11: 0000000000000246 R12: 0000000000000060
    R13: ffffffff81c3c3e0 R14: ffffffff81cfddf8 R15: ffff8801193b0800
    FS:  00007f614f1e9740(0000) GS:ffff88011f440000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    CR2: 00007f614f1fa000 CR3: 00000000d9291000 CR4: 00000000000006e0
    Call Trace:
      proc_sys_call_handler+0xb3/0xc0
      proc_sys_write+0x14/0x20
      vfs_write+0xba/0x1e0
      SyS_write+0x46/0xb0
      tracesys+0xe1/0xe6

However, if the percpu_pagelist_fraction sysctl is set by the user, it
is also impossible to restore it to the kernel default since the user
cannot write 0 to the sysctl.

This patch allows the user to write 0 to restore the default behavior.
It still requires a fraction equal to or larger than 8, however, as
stated by the documentation for sanity.  If a value in the range [1, 7]
is written, the sysctl will return EINVAL.

This successfully solves the divide by zero issue at the same time.

Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hugetlb: fix copy_hugetlb_page_range() to handle migration/hwpoisoned entry

commit 4a705fef986231a3e7a6b1a6d3c37025f021f49f upstream.

There's a race between fork() and hugepage migration, as a result we try
to "dereference" a swap entry as a normal pte, causing kernel panic.
The cause of the problem is that copy_hugetlb_page_range() can't handle
"swap entry" family (migration entry and hwpoisoned entry) so let's fix
it.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: pcie: try to get ownership several times

commit 501fd9895c1d7d8161ed56698ae2fccb10ef14f5 upstream.

Some races with the hardware can happen when we take
ownership of the device. Don't give up after the first try.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix a memory leak on sta rate selection table

commit 53d045258ee2e38b1e882617cb0799a04d05f5fa upstream.

If the rate control algorithm uses a selection table, it
is leaked when the station is destroyed - fix that.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Reported-by: Christophe Prévotaux <cprevotaux@nltinc.com>
Fixes: 0d528d85c519 ("mac80211: improve the rate control API")
[add commit log entry, remove pointless NULL check]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: don't check netdev state for debugfs read/write

commit 923eaf367206e01f22c97aee22300e332d071916 upstream.

Doing so will lead to an oops for a p2p-dev interface, since it has
no netdev.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix IBSS join by initializing last_scan_completed

commit c7d37a66e345df2fdf1aa7b2c9a6d3d53846ca5b upstream.

Without this fix, freshly rebooted Linux creates a new IBSS
instead of joining an existing one. Only when jiffies counter
overflows after 5 minutes the IBSS can be successfully joined.

Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
[edit commit message slightly]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_pstate: Correct rounding in busy calculation

commit 51d211e9c334b9eca3505f4052afa660c3e0606b upstream.

There was a mistake in the actual rounding portion this previous patch:
f0fe3cd7e12d (intel_pstate: Correct rounding in busy calculation) such that
the rounding was asymetric and incorrect.

Severity: Not very serious, but can increase target pstate by one extra value.
For real world work flows the issue should self correct (but I have no proof).
It is the equivalent of different PID gains for positive and negative numbers.

Examples:
-3.000000 used to round to -4, rounds to -3 with this patch.
-3.503906 used to round to -5, rounds to -4 with this patch.

Fixes: f0fe3cd7e12d (intel_pstate: Correct rounding in busy calculation)
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (ina2xx) Cast to s16 on shunt and current regs

commit c0214f98943b1fe43f7be61b7782b0c8f0836f28 upstream.

All devices supported by ina2xx are bidirectional and report the
measured shunt voltage and power values as a signed 16 bit, but the
current driver implementation caches all registers as u16, leading
to an incorrect sign extension when reporting to userspace in
ina2xx_get_value().

This patch fixes the problem by casting the signed registers to s16.
Tested on an INA219.

Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rbd: handle parent_overlap on writes correctly

commit 9638556a276125553549fdfe349c464481ec2f39 upstream.

The following check in rbd_img_obj_request_submit()

    rbd_dev->parent_overlap <= obj_request->img_offset

allows the fall through to the non-layered write case even if both
parent_overlap and obj_request->img_offset belong to the same RADOS
object.  This leads to data corruption, because the area to the left of
parent_overlap ends up unconditionally zero-filled instead of being
populated with parent data.  Suppose we want to write 1M to offset 6M
of image bar, which is a clone of foo@snap; object_size is 4M,
parent_overlap is 5M:

    rbd_data.<id>.0000000000000001
     ---------------------|----------------------|------------
    | should be copyup'ed | should be zeroed out | write ...
     ---------------------|----------------------|------------
   4M                    5M                     6M
                    parent_overlap    obj_request->img_offset

4..5M should be copyup'ed from foo, yet it is zero-filled, just like
5..6M is.

Given that the only striping mode kernel client currently supports is
chunking (i.e. stripe_unit == object_size, stripe_count == 1), round
parent_overlap up to the next object boundary for the purposes of the
overlap check.

Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rbd: use reference counts for image requests

commit 0f2d5be792b0466b06797f637cfbb0f64dbb408c upstream.

Each image request contains a reference count, but to date it has
not actually been used.  (I think this was just an oversight.) A
recent report involving rbd failing an assertion shed light on why
and where we need to use these reference counts.

Every OSD request associated with an object request uses
rbd_osd_req_callback() as its callback function.  That function will
call a helper function (dependent on the type of OSD request) that
will set the object request's "done" flag if the object request if
appropriate.  If that "done" flag is set, the object request is
passed to rbd_obj_request_complete().

In rbd_obj_request_complete(), requests are processed in sequential
order.  So if an object request completes before one of its
predecessors in the image request, the completion is deferred.
Otherwise, if it's a completing object's "turn" to be completed, it
is passed to rbd_img_obj_end_request(), which records the result of
the operation, accumulates transferred bytes, and so on.  Next, the
successor to this request is checked and if it is marked "done",
(deferred) completion processing is performed on that request, and
so on.  If the last object request in an image request is completed,
rbd_img_request_complete() is called, which (typically) destroys
the image request.

There is a race here, however.  The instant an object request is
marked "done" it can be provided (by a thread handling completion of
one of its predecessor operations) to rbd_img_obj_end_request(),
which (for the last request) can then lead to the image request
getting torn down.  And this can happen *before* that object has
itself entered rbd_img_obj_end_request().  As a result, once it
*does* enter that function, the image request (and even the object
request itself) may have been freed and become invalid.

All that's necessary to avoid this is to properly count references
to the image requests.  We tear down an image request's object
requests all at once--only when the entire image request has
completed.  So there's no need for an image request to count
references for its object requests.  However, we don't want an
image request to go away until the last of its object requests
has passed through rbd_img_obj_callback().  In other words,
we don't want rbd_img_request_complete() to necessarily
result in the image request being destroyed, because it may
get called before we've finished processing on all of its
object requests.

So the fix is to add a reference to an image request for
each of its object requests.  The reference can be viewed
as representing an object request that has not yet finished
its call to rbd_img_obj_callback().  That is emphasized by
getting the reference right after assigning that as the image
object's callback function.  The corresponding release of that
reference is done at the end of rbd_img_obj_callback(), which
every image object request passes through exactly once.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm thin: update discard_granularity to reflect the thin-pool blocksize

commit 09869de57ed2728ae3c619803932a86cb0e2c4f8 upstream.

DM thinp already checks whether the discard_granularity of the data
device is a factor of the thin-pool block size. But when using the
dm-thin-pool's discard passdown support, DM thinp was not selecting the
max of the underlying data device's discard_granularity and the
thin-pool's block size.

Update set_discard_limits() to set discard_granularity to the max of
these values. This enables blkdev_issue_discard() to properly align the
discards that are sent to the DM thin device on a full block boundary.
As such each discard will now cover an entire DM thin-pool block and the
block will be reclaimed.

Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Allow change security level on ATT_CID in slave role

commit 92d1372e1a9fec00e146b74e8b9ad7a385b9b37f upstream.

Kernel supports SMP Security Request so don't block increasing security
when we are slave.

Signed-off-by: Marcin Kraglak <marcin.kraglak@tieto.com>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix locking of hdev when calling into SMP code

commit c73f94b8c093a615ce80eabbde0ac6eb9abfe31a upstream.

The SMP code expects hdev to be unlocked since e.g. crypto functions
will try to (re)lock it. Therefore, we need to release the lock before
calling into smp.c from mgmt.c. Without this we risk a deadlock whenever
the smp_user_confirm_reply() function is called.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Tested-by: Lukasz Rymanowski <lukasz.rymanowski@tieto.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix indicating discovery state when canceling inquiry

commit 50143a433b70e3145bcf8a4a4e54f0c11bdee32b upstream.

When inquiry is canceled through the HCI_Cancel_Inquiry command there is
no Inquiry Complete event generated. Instead, all we get is the command
complete for the HCI_Inquiry_Cancel command. This means that we must
call the hci_discovery_set_state() function from the respective command
complete handler in order to ensure that user space knows the correct
discovery state.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix check for connection encryption

commit e694788d73efe139b24f78b036deb97fe57fa8cb upstream.

The conn->link_key variable tracks the type of link key in use. It is
set whenever we respond to a link key request as well as when we get a
link key notification event.

These two events do not however always guarantee that encryption is
enabled: getting a link key request and responding to it may only mean
that the remote side has requested authentication but not encryption. On
the other hand, the encrypt change event is a certain guarantee that
encryption is enabled. The real encryption state is already tracked in
the conn->link_mode variable through the HCI_LM_ENCRYPT bit.

This patch fixes a check for encryption in the hci_conn_auth function to
use the proper conn->link_mode value and thereby eliminates the chance
of a false positive result.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix SSP acceptor just-works confirmation without MITM

commit ba15a58b179ed76a7e887177f2b06de12c58ec8f upstream.

From the Bluetooth Core Specification 4.1 page 1958:

"if both devices have set the Authentication_Requirements parameter to
one of the MITM Protection Not Required options, authentication stage 1
shall function as if both devices set their IO capabilities to
DisplayOnly (e.g., Numeric comparison with automatic confirmation on
both devices)"

So far our implementation has done user confirmation for all just-works
cases regardless of the MITM requirements, however following the
specification to the word means that we should not be doing confirmation
when neither side has the MITM flag set.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Tested-by: Szymon Janc <szymon.janc@tieto.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/vmwgfx: Fix incorrect write to read-only register v2:

commit 4e578080ed3262ed2c3985868539bc66218d25c0 upstream.

Commit "drm/vmwgfx: correct fb_fix_screeninfo.line_length", while fixing a
vmwgfx fbdev bug, also writes the pitch to a supposedly read-only register:
SVGA_REG_BYTES_PER_LINE, while it should be (and also in fact is) written to
SVGA_REG_PITCHLOCK.

This patch is Cc'd stable because of the unknown effects writing to this
register might have, particularly on older device versions.

v2: Updated log message.

Cc: Christopher Friedt <chrisfriedt@gmail.com>
Tested-by: Christopher Friedt <chrisfriedt@gmail.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: set backlight duty cycle after backlight enable for gen4

commit 2e7eeeb59a92d09144fdb7d2dc1af77a10a7945b upstream.

For reasons I can't claim to fully understand gen4 seems to require
backlight duty cycle setting after the backlight has been enabled, or
else black screen follows. I don't have documentation for the correct
sequence on gen4 either. Confirmed on Dell Latitude D630 and MacBook4,1.

This fixes a regression introduced by
commit b35684b8fa94e04f55fd38bf672b737741d2f9e2
Author: Jani Nikula <jani.nikula@intel.com>
Date: Thu Nov 14 12:13:41 2013 +0200

drm/i915: do full backlight setup at enable time

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=75791
Reported-and-tested-by: mcy@lm7.fr
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79423
Reported-and-tested-by: Marc Milgram <mmilgram@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Avoid div-by-zero when pixel_multiplier is zero

commit 2b85886a5457f5c5dbcd32edbd4e6bba0f4e8678 upstream.

On certain platforms pixel_multiplier is read out in
.get_pipe_config(), but it also gets used to calculate the
pixel clock in intel_sdvo_get_config(). If the pipe is disable
but some SDVO outputs are active, we may end up dividing by zero
in intel_sdvo_get_config().

To avoid the problem simply check for zero pixel_multiplier and skip
the division. Another attempt at fixing this involved populating
pixel_multiplier to 1 even for disabled pipes, but that triggered a
WARN because SDVO_CMD_GET_CLOCK_RATE_MULT command failed and thus
encoder_pixel_multiplier was left at zero and didn't match
pipe_config->pixel_multiplier.

The "divide by pixel_multiplier" operation got introduced here:
commit 18442d08786472c63a0a80c27f92b033dffc26de
Author: Ville SyrjÃ¤lÃ¤ <ville.syrjala@linux.intel.com>
Date: Fri Sep 13 16:00:08 2013 +0300

drm/i915: Fix port_clock and adjusted_mode.clock readout all over

and it has caused a regression on certain machines since they would
hit the div-by-zero during resume.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76520
Tested-by: Tim Richardson <tim@tim-richardson.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/gk208/gr: add missing registers to grctx init

commit 255b329ca7f0e9b5fa6da3a68bb713684fe10305 upstream.

This fixes hangs on GK208 which happen instantaneously on trying to use a
geometry shader.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nv50-/mc: fix kms pageflip events by reordering irq handling order.

commit dcfb1009df3b4ad8d2e0779dd45b438629d6858a upstream.

Whenever a single nouveau_mc_intr() main gpu irq-handler invocation was
responsible for calling both, the vblank-irq handler (display engine irq)
and kms-pageflip completion handler (from fifo irq), the order of
invocation was wrong. nouveau_finish_flip() was called before
drm_handle_vblank() for the vblank of pageflip completion, so the
emitted pageflip event contained stale vblank count and timestamp
from previous vblank. This caused failure in userspace to timestamp
properly.

Reorder order of invocation of engine irq handlers: Put
NVDEV_ENGINE_DISP always on top, and thereby before NVDEV_ENGINE_FIFO,
so that drm_handle_vblank() gets called to update vblank timestamps
and count before potential pageflip events make use of that
information.

This works on nv-50 and later, where kms-pageflip completion triggers
an irq either after a separate vblank irq, or both pageflip and vblank
trigger one common irq invocation, but never before vblank irqs.

v2 (Ben):
- removed mods for nv04-nv40, it doesn't help there anyway
- this is considered a hack, and a better solution should be found

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon/cik: fix typo in EOP packet

commit b397207b7475afa9df2f94541f978100ff1ea47e upstream.

Volatile bit was in the wrong location. This bit is
not used at the moment.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon/dpm: fix vddci setup typo on cayman

commit b0880e87c1fd038b84498944f52e52c3e86ebe59 upstream.

We were using the vddc mask rather than the vddci mask.

Bug:
https://bugzilla.kernel.org/show_bug.cgi?id=79071

May also fix:
https://bugs.freedesktop.org/show_bug.cgi?id=69723

Noticed by: Dieter Nützel <Dieter@nuetzel-hh.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon/dpm: fix typo in vddci setup for eg/btc

commit e07929810f0a19ddd756558290c7d72827cbfcd9 upstream.

We were using the vddc mask rather than the vddci mask.

Bug:
https://bugzilla.kernel.org/show_bug.cgi?id=79071

Possibly also fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=68571

Noticed-by: Jonathan Howard <jonathan@unbiased.name>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: don't allow RADEON_GEM_DOMAIN_CPU for command submission

commit ec65da385d46f63740c1c9230b891a6dcbd64c71 upstream.

It hangs the hardware.

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon/atom: fix dithering on certain panels

commit 642528355c694f5ed68f6bff9ff520326a249f99 upstream.

We need to specify the encoder mode as LVDS for eDP
when using the Crtc_Source atom table in order to properly
set up the FMT hardware.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=73911

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon/dp: fix lane/clock setup for dp 1.2 capable devices

commit 3b6d9fd23e015b5397c438fd3cd74147d2c805b6 upstream.

Only DCE5+ asics support DP 1.2.

Noticed by ArtForz on IRC.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: fix typo in radeon_connector_is_dp12_capable()

commit af5d36539dfe043f1cf0f8b7334d6bb12cd14e75 upstream.

We were checking the ext clock rather than the display clock.

Noticed by ArtForz on IRC.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/radeon: only apply hdmi bpc pll flags when encoder mode is hdmi

commit 7d5ab3009a8ca777174f6f469277b3922d56fd4b upstream.

May fix display issues with non-HDMI displays.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/kms: reference vblank for crtc during pageflip.

commit ba124a41058b300a5464206d2d33803cc3dc82ec upstream.

Need to drm_vblank_get/put() the crtc involved in a
pending pageflip, or we might not get vblank irqs and
updates of vblank counts and timestamps for pageflip
events and flip completion.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/disp/nv04-nv40: abort scanoutpos query on vga analog.

commit e291af3f2259e9e105dfd72416fd5796513791a4 upstream.

nv04_disp_scanoutpos() must abort to trigger simple timestamping
fallback if vtotal/htotal regs return zero. This happens if the
output isn't a digital output, but a vga analog output, as the
regs don't get initialized in that case.

Fixes timestamping failure on nv-40 and earlier with vga output.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/kms/nv04-nv40: fix pageflip events via special case.

commit af4870e406126b7ac0ae7c7ce5751f25ebe60f28 upstream.

Cards with nv04 display engine can't reliably use vblank
counts and timestamps computed via drm_handle_vblank(), as
the function gets invoked after sending the pageflip events.

Fix this by defaulting to the old crtcid = -1 fallback path
on <= NV-50 cards, and only using the precise path on NV-50
and later.

Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vgaswitcheroo: switch the mux to the igp on power down when runpm is enabled

commit f2bc561610962693be61425cf913778586d8f9c1 upstream.

Avoids blank screens on muxed systems when runpm is active.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=75917

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: pxa3xx_nand: make the driver work on big-endian systems

commit b7e460624f0f3c31150f3b09e75b0d009e22ba5f upstream.

The pxa3xx_nand driver currently uses __raw_writel() and __raw_readl()
to access I/O registers. However, those functions do not do any
endianness swapping, which means that they won't work when the CPU
runs in big-endian but the I/O registers are little endian, which is
the common situation for ARM systems running big endian.

Since __raw_writel() and __raw_readl() do not include any memory
barriers and the pxa3xx_nand driver can only be compiled for ARM
platforms, the closest I/o accessors functions that do endianess
swapping are writel_relaxed() and readl_relaxed().

This patch has been verified to work on Armada XP GP: without the
patch, the NAND is not detected when the kernel runs big endian while
it is properly detected when the kernel runs little endian. With the
patch applied, the NAND is properly detected in both situations
(little and big endian).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: nand: omap: fix BCHx ecc.correct to return detected bit-flips in erased-page

commit f306e8c3b667632952f1a4a74ffb910bbc06255f upstream.

fixes: commit 62116e5171e00f85a8d53f76e45b84423c89ff34
mtd: nand: omap2: Support for hardware BCH error correction.

In omap_elm_correct_data(), if bitflip_count in an erased-page is within the
correctable limit (< ecc.strength), then it is not indicated back to the caller
ecc->read_page().

This mis-guides upper layers like MTD and UBIFS layer to assume erased-page as
perfectly clean and use it for writing even if actual bitflip_count was
dangerously high (bitflip_count > mtd->bitflip_threshold).

This patch fixes this above issue, by returning 'stats' to caller
ecc->read_page() under all scenarios.

Reported-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Pekon Gupta <pekon@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: eLBC NAND: fix subpage write support

commit f034d87def51f026b735d1e2877e9387011b2ba3 upstream.

As subpage write is enabled by default for all drivers, nand_write_subpage_hwecc
causes a crash if the driver did not register ecc->hwctl or ecc->calculate.
This behavior was introduced in
commit 837a6ba4f3b6d23026674e6af6b6849a4634fff9
"mtd: nand: subpage write support for hardware based ECC schemes".

This fixes a crash by emulating subpage write support by padding sub-page data
with 0xff on either sides to make it full page compatible.

Reported-by: Helmut Schaa <helmut.schaa@googlemail.com>
Tested-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Pekon Gupta <pekon@ti.com>
Reviewed-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rt2x00: fix rfkill regression on rt2500pci

commit 616a8394b5df8c88f4dd416f4527439a4e365034 upstream.

As reported by Niels, starting rfkill polling during device probe
(commit e2bc7c5, generally sane change) broke rfkill on rt2500pci
device. I considered that bug as some initalization issue, which
should be fixed on rt2500pci specific code. But after several
attempts (see bug report for details) we fail to find working solution.
Hence I decided to revert to old behaviour on rt2500pci to fix
regression.

Additionally patch also unregister rfkill on device remove instead
of ifconfig down, what was another issue introduced by bad commit.

Bug report:
https://bugzilla.kernel.org/show_bug.cgi?id=73821

Fixes: e2bc7c5f3cb8 ("rt2x00: Fix rfkill_polling register function.")
Bisected-by: Niels <nille0386@googlemail.com>
Reported-and-tested-by: Niels <nille0386@googlemail.com>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>