samin [Thu, 12 May 2022 02:04:39 +0000 (10:04 +0800)]
hwmon:sfctemp: add starfive,jh7110-temp bindings.
jh7110 and jh7100 use the same configuration.
Signed-off-by: samin <samin.guo@starfivetech.com>
Emil Renner Berthing [Sun, 6 Jun 2021 20:31:18 +0000 (22:31 +0200)]
hwmon: (sfctemp) Add StarFive JH7100 temperature sensor
Register definitions and conversion constants based on sfctemp driver by
Samin in the StarFive 5.10 kernel.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: samin <samin.guo@starfivetech.com>
Emil Renner Berthing [Sun, 6 Jun 2021 20:15:22 +0000 (22:15 +0200)]
dt-bindings: hwmon: add starfive,jh7100-temp bindings
Add bindings for the temperature sensor on the StarFive JH7100 SoC.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: samin <samin.guo@starfivetech.com>
andy.hu [Wed, 18 May 2022 15:15:20 +0000 (15:15 +0000)]
Merge branch 'CR_1024_PWMDAC_curry.zhang' into 'jh7110-5.15.y-devel'
[Audio: PWMDAC] enable pwmdac driver on 7110 evb board
See merge request sdk/linux!71
curry.zhang [Wed, 18 May 2022 12:56:11 +0000 (05:56 -0700)]
[Audio: PWMDAC] enable pwmdac driver on 7110 evb board
Signed-off-by: curry.zhang <curry.zhang@starfivetech.com>
andy.hu [Tue, 17 May 2022 08:39:22 +0000 (08:39 +0000)]
Merge branch 'CR_1000_I2C_hal.feng' into 'jh7110-5.15.y-devel'
riscv: dts: starfive: Add nodes for i2c2-5
See merge request sdk/linux!68
andy.hu [Tue, 17 May 2022 03:03:54 +0000 (03:03 +0000)]
Merge branch 'CR_1006_CLOCK_TREE_Flag_Xingyu.Wu' into 'jh7110-5.15.y-devel'
clk:starfive:Change some clocks to 'ignore-unused'
See merge request sdk/linux!69
xingyu.wu [Tue, 17 May 2022 02:01:23 +0000 (10:01 +0800)]
clk:starfive:Change some clocks to 'ignore-unused'
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Hal Feng [Mon, 16 May 2022 08:49:55 +0000 (16:49 +0800)]
riscv: dts: starfive: Add nodes for i2c2-5
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
andy.hu [Sun, 15 May 2022 12:05:04 +0000 (12:05 +0000)]
Merge branch 'CR_968_bring_up_samin.guo' into 'jh7110-5.15.y-devel'
Cr 968 bring up samin.guo
See merge request sdk/linux!67
samin [Sun, 15 May 2022 10:44:28 +0000 (18:44 +0800)]
clksource:starfive-timer: Modify the default clock frequency
timer on soc is 24M.
Signed-off-by: samin <samin.guo@starfivetech.com>
yanhong.wang [Sun, 15 May 2022 10:41:20 +0000 (18:41 +0800)]
defconfig:starfive-jh7110: update defconfig
Add YUTAI 8521 phy to defconfig.
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
yanhong.wang [Sun, 15 May 2022 10:25:09 +0000 (18:25 +0800)]
dt-bingings:gmac:jh7110: change config parameter
Change the gamc configuration parameter for JH7110.
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
yanhong.wang [Sun, 15 May 2022 10:09:37 +0000 (18:09 +0800)]
net:stmmac:dwc-qos: add JH7110_GMAC0_GTXC clk config for JH7110
Add JH7110_GMAC0_GTXC clk configuration for JH7110.
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
yanhong.wang [Sun, 15 May 2022 10:06:19 +0000 (18:06 +0800)]
net:phy: support YUTAI 8521 phy
Add driver to support YUTAI 8521 phy.
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
samin [Sun, 15 May 2022 08:18:02 +0000 (16:18 +0800)]
dt-bindings:starfive:jh7110: simplify aliases
simplify aliases for serial/spi/gpio etc.
Signed-off-by: samin <samin.guo@starfivetech.com>
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
xingyu.wu [Sun, 15 May 2022 07:20:11 +0000 (15:20 +0800)]
clk:starfive:Change PLL0 dafalut value from 1250m to 1000m
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
xingyu.wu [Fri, 13 May 2022 10:03:03 +0000 (18:03 +0800)]
driver:clk:Add noc clock initialization in isp clock tree driver
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
xingyu.wu [Sat, 14 May 2022 20:01:59 +0000 (04:01 +0800)]
clk:starfive:Modify the clock to 'CLK_IGNORE_UNUSED' flag
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
samin [Sat, 14 May 2022 11:07:24 +0000 (19:07 +0800)]
clktree: jh7110: disable jh7110_clk_disable function interface.
/*do not upstram*/
The system will hang when clk_disable.
need to debug.
Signed-off-by: samin <samin.guo@starfivetech.com>
samin [Sat, 14 May 2022 11:04:01 +0000 (19:04 +0800)]
dt-bingings:riscv_timer: timebase-frequency is 4M.
JH7110 SOC riscv_timer frequency is 4M.
FPGA is 2M.
Signed-off-by: samin <samin.guo@starfivetech.com>
samin [Wed, 11 May 2022 07:26:11 +0000 (15:26 +0800)]
v4l2:starfive: fix compilation issue on evb board
HWBORD_FPGA macro is no longer used on evb, so remove it.
Signed-off-by: samin <samin.guo@starfivetech.com>
jianlong.huang [Wed, 11 May 2022 22:56:46 +0000 (06:56 +0800)]
modify dts to fix make fail
Signed-off-by: jianlong.huang <jianlong.huang@starfivetech.com>
jianlong.huang [Tue, 10 May 2022 07:46:52 +0000 (15:46 +0800)]
modify gpio index base evb
Signed-off-by: jianlong.huang <jianlong.huang@starfivetech.com>
andy.hu [Sat, 7 May 2022 11:11:31 +0000 (11:11 +0000)]
Merge branch 'CR_858_SEC_william.qiu' into 'jh7110_fpga_dev_5.15'
dma:starfive: remove warning message
See merge request sdk/sft-riscvpi-linux-5.10!61
andy.hu [Sat, 7 May 2022 11:10:58 +0000 (11:10 +0000)]
Merge branch 'CR_946_DRM_warning_keith.zhao' into 'jh7110_fpga_dev_5.15'
Driver:DRM:DC8200
See merge request sdk/sft-riscvpi-linux-5.10!63
william.qiu [Sat, 7 May 2022 10:58:55 +0000 (18:58 +0800)]
dmaengine:pl080: remove warning message
remove warning message
Signed-off-by: william.qiu <william.qiu@starfivetech.com>
andy.hu [Sat, 7 May 2022 11:02:45 +0000 (11:02 +0000)]
Merge branch 'CR_947_V4L2_changhuang.liang' into 'jh7110_fpga_dev_5.15'
V4L2: change vin module coding style
See merge request sdk/sft-riscvpi-linux-5.10!60
keith.zhao [Sat, 7 May 2022 10:40:34 +0000 (03:40 -0700)]
Driver:DRM:DC8200
fix warning&error checked by script checkpatch.pl
Signed-off-by: keith <keith.zhao@statfivetech.com>
andy.hu [Sat, 7 May 2022 10:39:23 +0000 (10:39 +0000)]
Merge branch 'CR_948_dts_hal.feng' into 'jh7110_fpga_dev_5.15'
riscv: dts: starfive: Delete redundant nodes and improve coding style
See merge request sdk/sft-riscvpi-linux-5.10!62
Hal Feng [Sat, 7 May 2022 09:02:20 +0000 (17:02 +0800)]
riscv: dts: starfive: Delete redundant nodes and improve coding style
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
changhuang.liang [Sat, 7 May 2022 08:05:23 +0000 (16:05 +0800)]
V4L2: change vin module coding style
Signed-off-by: changhuang.liang <changhuang.liang@starfivetech.com>
andy.hu [Sat, 7 May 2022 05:21:46 +0000 (05:21 +0000)]
Merge branch 'CR_943_Timer_warning_Xingyu.Wu' into 'jh7110_fpga_dev_5.15'
drivers:timer:Fix warning by checkpatch.pl
See merge request sdk/sft-riscvpi-linux-5.10!59
andy.hu [Sat, 7 May 2022 05:11:50 +0000 (05:11 +0000)]
Merge branch 'CR_944_watchdog_warning_Xingyu.Wu' into 'jh7110_fpga_dev_5.15'
drivers:watchdog:Remove warning messeage and clean up code
See merge request sdk/sft-riscvpi-linux-5.10!58
xingyu.wu [Sat, 7 May 2022 03:50:43 +0000 (11:50 +0800)]
drivers:watchdog:Remove warning messeage and clean up code
Signed-off-by: xingyu.wu <xingyu.wu@starfivetech.com>
xingyu.wu [Sat, 7 May 2022 03:10:44 +0000 (11:10 +0800)]
drivers:timer:Fix warning by checkpatch.pl
Signed-off-by: xingyu.wu <xingyu.wu@starfivetech.com>
andy.hu [Sat, 7 May 2022 03:09:21 +0000 (03:09 +0000)]
Merge branch 'CR_937_DRM_keith.zhao' into 'jh7110_fpga_dev_5.15'
DTS:drm:hdmi
See merge request sdk/sft-riscvpi-linux-5.10!57
andy.hu [Sat, 7 May 2022 03:05:02 +0000 (03:05 +0000)]
Merge branch 'CR_933_HIFI4_henry.qin' into 'jh7110_fpga_dev_5.15'
HIFI4: Add xrp dts status in jh7110-common.dtsi
See merge request sdk/sft-riscvpi-linux-5.10!56
keith.zhao [Sat, 7 May 2022 02:49:48 +0000 (19:49 -0700)]
DTS:drm:hdmi
fix hdmi node build error
Signed-off-by: keith <keith.zhao@statfivetech.com>
henry.qin [Sat, 7 May 2022 02:29:24 +0000 (10:29 +0800)]
HIFI4: Add xrp dts status in jh7110-common.dtsi
Signed-off-by: henry.qin <henry.qin@starfivetech.com>
andy.hu [Sat, 7 May 2022 02:11:30 +0000 (02:11 +0000)]
Merge branch 'CR_942_SPI_warning_Xingyu.Wu' into 'jh7110_fpga_dev_5.15'
dts:starfive: Fix spi and qspi compilation warning
See merge request sdk/sft-riscvpi-linux-5.10!50
xingyu.wu [Fri, 6 May 2022 07:52:26 +0000 (15:52 +0800)]
dts:starfive: Fix spi and qspi compilation warning
Signed-off-by: xingyu.wu <xingyu.wu@starfivetech.com>
andy.hu [Sat, 7 May 2022 01:27:56 +0000 (01:27 +0000)]
Merge branch 'CR_939_PWMDAC_curry.zhang' into 'jh7110_fpga_dev_5.15'
[Audio: PWMDAC] Adjust code style
See merge request sdk/sft-riscvpi-linux-5.10!55
curry.zhang [Fri, 6 May 2022 09:44:30 +0000 (02:44 -0700)]
[Audio: PWMDAC] Adjust code style
Signed-off-by: curry.zhang <curry.zhang@starfivetech.com>
andy.hu [Fri, 6 May 2022 13:51:43 +0000 (13:51 +0000)]
Merge branch 'CR_941_PWM_hal.feng' into 'jh7110_fpga_dev_5.15'
pwm: pwm-starfive-ptc: Fix compiler warnings and improve coding style
See merge request sdk/sft-riscvpi-linux-5.10!54
Hal Feng [Fri, 6 May 2022 08:54:54 +0000 (16:54 +0800)]
pwm: pwm-starfive-ptc: Fix compiler warnings and improve coding style
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
andy.hu [Fri, 6 May 2022 11:59:09 +0000 (11:59 +0000)]
Merge branch 'CR_937_DRM_keith.zhao' into 'jh7110_fpga_dev_5.15'
DTS:DRM
See merge request sdk/sft-riscvpi-linux-5.10!53
andy.hu [Fri, 6 May 2022 11:57:40 +0000 (11:57 +0000)]
Merge branch 'CR_930_V4L2_changhuang.liang' into 'jh7110_fpga_dev_5.15'
V4L2: fixed code warning!
See merge request sdk/sft-riscvpi-linux-5.10!52
andy.hu [Fri, 6 May 2022 11:56:06 +0000 (11:56 +0000)]
Merge branch 'CR_938_PDM_warning_walker.chen' into 'jh7110_fpga_dev_5.15'
Audio PDM: remove warning message and clean up code
See merge request sdk/sft-riscvpi-linux-5.10!51
andy.hu [Fri, 6 May 2022 11:55:29 +0000 (11:55 +0000)]
Merge branch 'CR_907_GPU_shanlong.li' into 'jh7110_fpga_dev_5.15'
driver:GPU: fix compile warnings
See merge request sdk/sft-riscvpi-linux-5.10!48
andy.hu [Fri, 6 May 2022 09:40:50 +0000 (09:40 +0000)]
Merge branch 'CR_940_PCIE_mason.huo' into 'jh7110_fpga_dev_5.15'
PCI: plda: Fix kernel compile warnings
See merge request sdk/sft-riscvpi-linux-5.10!49
shanlong.li [Fri, 6 May 2022 06:47:08 +0000 (23:47 -0700)]
driver:GPU: fix compile warnings
fix compile warnings
Signed-off-by: shanlong.li <shanlong.li@starfivetech.com>
andy.hu [Fri, 6 May 2022 09:07:07 +0000 (09:07 +0000)]
Merge branch 'CR_935_pinctrl_warning_jianlong' into 'jh7110_fpga_dev_5.15'
fix warning about pinctrl-starfive-jh7110.c
See merge request sdk/sft-riscvpi-linux-5.10!47
keith.zhao [Fri, 6 May 2022 08:52:09 +0000 (01:52 -0700)]
DTS:DRM
fix build warning in drm dts node
Signed-off-by: keith <keith.zhao@statfivetech.com>
jianlonghuang [Fri, 6 May 2022 08:40:01 +0000 (16:40 +0800)]
modify code format base on checkpatch.pl
Signed-off-by: jianlonghuang <jianlong.huang@starfivetech.com>
Walker Chen [Fri, 6 May 2022 08:30:03 +0000 (16:30 +0800)]
Audio PDM: remove warning message and clean up code
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
changhuang.liang [Fri, 6 May 2022 08:07:52 +0000 (16:07 +0800)]
V4L2: fixed code warning!
V4L2: add m31 dphy reset support!
dts/starfive: add m31 dphy reset configure!
Signed-off-by: changhuang.liang <changhuang.liang@starfivetech.com>
andy.hu [Fri, 6 May 2022 08:03:21 +0000 (08:03 +0000)]
Merge branch 'CR_858_SEC_william.qiu' into 'jh7110_fpga_dev_5.15'
Cr 858 sec william.qiu
See merge request sdk/sft-riscvpi-linux-5.10!46
mason.huo [Fri, 6 May 2022 07:35:59 +0000 (15:35 +0800)]
PCI: plda: Fix kernel compile warnings
Remove the unused functions.
Adjust the dts configuration.
Signed-off-by: mason.huo <mason.huo@starfivetech.com>
jianlonghuang [Fri, 6 May 2022 05:43:40 +0000 (13:43 +0800)]
fix warning about pinctrl-starfive-jh7110.c
Signed-off-by: jianlonghuang <jianlong.huang@starfivetech.com>
william.qiu [Thu, 5 May 2022 09:15:27 +0000 (17:15 +0800)]
dt-bingings:crypto: add dma support for crypto.
add dma support for crypto, so it can choose cpu/dma boot.
Signed-off-by: william.qiu <william.qiu@starfivetech.com>
william.qiu [Thu, 5 May 2022 06:26:08 +0000 (14:26 +0800)]
crypto:starfive:fix format problem
Fix the problem that some parameters in the header file are not aligned
Signed-off-by: william.qiu <william.qiu@starfivetech.com>
andy.hu [Thu, 5 May 2022 13:59:58 +0000 (13:59 +0000)]
Merge branch 'CR_875_SPDIF_curry.zhang' into 'jh7110_fpga_dev_5.15'
[Audio: SPDIF] Add standard system clock tree API
See merge request sdk/sft-riscvpi-linux-5.10!42
andy.hu [Thu, 5 May 2022 13:59:35 +0000 (13:59 +0000)]
Merge branch 'CR_738_PWMDAC_curry.zhang' into 'jh7110_fpga_dev_5.15'
[Audio: PWMDAC] Add clock tree and modify driver for 7110 platform
See merge request sdk/sft-riscvpi-linux-5.10!39
andy.hu [Thu, 5 May 2022 13:58:54 +0000 (13:58 +0000)]
Merge branch 'CR_874_I2S_curry.zhang' into 'jh7110_fpga_dev_5.15'
[Audio] I2S and WM8960
See merge request sdk/sft-riscvpi-linux-5.10!40
andy.hu [Thu, 5 May 2022 13:40:05 +0000 (13:40 +0000)]
Merge branch 'CR_850_TDM_Walker.Chen' into 'jh7110_fpga_dev_5.15'
Cr 850 tdm walker.chen
See merge request sdk/sft-riscvpi-linux-5.10!43
curry.zhang [Wed, 4 May 2022 06:13:49 +0000 (23:13 -0700)]
[Audio: PWMDAC] Add standard system clock tree api
Signed-off-by: curry.zhang <curry.zhang@starfivetech.com>
WalkerChenL [Thu, 5 May 2022 10:14:31 +0000 (18:14 +0800)]
Audio:tdm: Add clock/reset/pinctrl initialization
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
andy.hu [Thu, 5 May 2022 13:24:02 +0000 (13:24 +0000)]
Merge branch 'CR_878_SBI_Xingyu.Wu' into 'jh7110_fpga_dev_5.15'
spi: Add clock, reset and pinctrl
See merge request sdk/sft-riscvpi-linux-5.10!41
andy.hu [Thu, 5 May 2022 13:10:57 +0000 (13:10 +0000)]
Merge branch 'CR_868_USB-HOST_yanhong.wang' into 'jh7110_fpga_dev_5.15'
Cr 868 usb host yanhong.wang
See merge request sdk/sft-riscvpi-linux-5.10!44
andy.hu [Thu, 5 May 2022 12:58:57 +0000 (12:58 +0000)]
Merge branch 'CR_849_PDM_Walker.Chen' into 'jh7110_fpga_dev_5.15'
Cr 849 pdm walker.chen
See merge request sdk/sft-riscvpi-linux-5.10!45
Walker Chen [Thu, 5 May 2022 12:16:58 +0000 (20:16 +0800)]
Audio pdm: add clock/reset/pinctrl initialization
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
yanhong.wang [Thu, 5 May 2022 09:23:58 +0000 (17:23 +0800)]
usb:cdns3:cdns3-starfive: Add StarFive wrapper driver for CDNS USB3 controller
Add driver to handle StarFive specific wrapper for Cadence USB3 controller
present on JH7110 SoC.
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
yanhong.wang [Thu, 5 May 2022 09:18:39 +0000 (17:18 +0800)]
dt-bingings:usb: Add usb device node
Add usb device node configuration for JH7110 SoC platform.
Signed-off-by: yanhong.wang <yanhong.wang@starfivetech.com>
curry.zhang [Thu, 5 May 2022 08:47:47 +0000 (01:47 -0700)]
[Audio: SPDIF] Add standard system clock tree API
Signed-off-by: curry.zhang <curry.zhang@starfivetech.com>
xingyu.wu [Thu, 5 May 2022 07:31:51 +0000 (15:31 +0800)]
spi: Add clock, reset and pinctrl
driver:spi: Add reset handle.
dts:starfive:dtsi: Add clock and reset node.
dts:starfive:pinctrl: Modify spi gpio and Add pinctrl.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
curry.zhang [Wed, 4 May 2022 08:03:41 +0000 (01:03 -0700)]
[Audio] I2S and WM8960
1) Add standard system clock tree API
2) Modify wm8960 and I2S drivers
Signed-off-by: curry.zhang <curry.zhang@starfivetech.com>
andy.hu [Fri, 29 Apr 2022 12:36:28 +0000 (12:36 +0000)]
Merge branch 'CR_833_VDEC_samin.guo' into 'jh7110_fpga_dev_5.15'
pmu:starfive:jh7110: Fix some errors and standardize variable naming
See merge request sdk/sft-riscvpi-linux-5.10!38
samin [Fri, 29 Apr 2022 07:29:14 +0000 (15:29 +0800)]
pmu:starfive:jh7110: Fix some errors and standardize variable naming
Fixed interrupt enabler logic error, fixed PMU_HARD_EVENT definition
error, changed some variable names, for better code style.
Note:
This is an interim version of the pmu driver that provides the
power_domian switch function.
It can be used in modules such as VPU/JPU/GPU/ISP/VOUT.
/* do not upstram */
Signed-off-by: samin <samin.guo@starfivetech.com>
andy.hu [Thu, 28 Apr 2022 13:04:03 +0000 (13:04 +0000)]
Merge branch 'CR_907_GPU_shanlong.li' into 'jh7110_fpga_dev_5.15'
Cr 907 gpu shanlong.li
See merge request sdk/sft-riscvpi-linux-5.10!37
andy.hu [Thu, 28 Apr 2022 11:48:10 +0000 (11:48 +0000)]
Merge branch 'CR_873_HIFI4_henry.qin' into 'jh7110_fpga_dev_5.15'
Cr 873 hifi4 henry.qin
See merge request sdk/sft-riscvpi-linux-5.10!31
andy.hu [Thu, 28 Apr 2022 11:38:27 +0000 (11:38 +0000)]
Merge branch 'CR_845_FPGA-V1.0-VIN_update_changhuang.liang' into 'jh7110_fpga_dev_5.15'
Cr 845 fpga v1.0 vin update changhuang.liang
See merge request sdk/sft-riscvpi-linux-5.10!35
andy.hu [Thu, 28 Apr 2022 11:35:45 +0000 (11:35 +0000)]
Merge branch 'CR_737_CLOCK_TREE_Xingyu.Wu' into 'jh7110_fpga_dev_5.15'
clk:starfive: Add isp clock tree driver
See merge request sdk/sft-riscvpi-linux-5.10!32
shanlong.li [Wed, 27 Apr 2022 11:06:17 +0000 (04:06 -0700)]
driver:GPU: add gpu driver
add gpu driver
use clk/rst api and pmu api
Signed-off-by: shanlong.li <shanlong.li@starfivetech.com>
shanlong.li [Wed, 27 Apr 2022 11:04:37 +0000 (04:04 -0700)]
driver:pmu : add turn off mask api
add turn off mask api
Signed-off-by: shanlong.li <shanlong.li@starfivetech.com>
andy.hu [Thu, 28 Apr 2022 11:01:41 +0000 (11:01 +0000)]
Merge branch 'CR_858_SEC_william.qiu' into 'jh7110_fpga_dev_5.15'
disable sec drvier
See merge request sdk/sft-riscvpi-linux-5.10!36
henry.qin [Thu, 28 Apr 2022 05:36:45 +0000 (13:36 +0800)]
HIFI4: Add hifi4 clk and rst, del unused code, resolve code review
problems, change file access mode.
Signed-off-by: henry.qin <henry.qin@starfivetech.com>
william.qiu [Thu, 28 Apr 2022 10:25:09 +0000 (18:25 +0800)]
crypto:starfive: disable crypto default on fpga.
For most fpga bitfile has no crypto, so disable it for better linux boot.
Signed-off-by: william.qiu <william.qiu@starfivetech.com>
xingyu.wu [Thu, 28 Apr 2022 10:18:17 +0000 (18:18 +0800)]
clk:starfive: Add definition instead of numbers
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
xingyu.wu [Wed, 27 Apr 2022 07:49:49 +0000 (15:49 +0800)]
clk:starfive: Add isp clock tree driver
Clock references refer to include/dt-bindings/clock/starfive-jh7110-isp.h
Enable the isp clock tree driver in dts file if use it.
If the fpga is not connetted with isp board, the isp clock tree must be disabled.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
shanlong.li [Wed, 27 Apr 2022 11:02:06 +0000 (04:02 -0700)]
driver:GPU: add gpu config
add gpu config
Signed-off-by: shanlong.li <shanlong.li@starfivetech.com>
shanlong.li [Wed, 27 Apr 2022 10:57:25 +0000 (03:57 -0700)]
dt-bingings:GPU: add clk/rst single
add clk/rst single
Signed-off-by: shanlong.li <shanlong.li@starfivetech.com>
andy.hu [Thu, 28 Apr 2022 07:29:42 +0000 (07:29 +0000)]
Merge branch 'CR_846_FPGA-V1.0-VOUT_update_keith.zhao' into 'jh7110_fpga_dev_5.15'
riscv:linux:driver:DC8200
See merge request sdk/sft-riscvpi-linux-5.10!33
andy.hu [Thu, 28 Apr 2022 07:24:53 +0000 (07:24 +0000)]
Merge branch 'CR_858_SEC_william.qiu' into 'jh7110_fpga_dev_5.15'
Cr 858 sec william.qiu
See merge request sdk/sft-riscvpi-linux-5.10!34
william.qiu [Wed, 27 Apr 2022 11:18:11 +0000 (19:18 +0800)]
crypto:starfive:jh7110: add crypto driver for starfive jh7110 soc.
add crypto driver for starfive jh7110 soc.
Signed-off-by: william.qiu <william.qiu@starfivetech.com>
william.qiu [Wed, 27 Apr 2022 07:34:02 +0000 (15:34 +0800)]
crypto:starfive: Write the security clock tree and reset description file
Write the security clock tree and reset description file
Signed-off-by: william.qiu <william.qiu@starfivetech.com>
william.qiu [Wed, 27 Apr 2022 09:05:03 +0000 (17:05 +0800)]
defconfig: add crypto defconfig support.
add defconfig for jh7110 crypto.
Signed-off-by: william.qiu <william.qiu@starfivetech.com>
william.qiu [Wed, 27 Apr 2022 10:04:03 +0000 (18:04 +0800)]
dt-bingings:crypto: add crypto node for jh7110 soc.
add support for jh7110 crypto.
Signed-off-by: william.qiu <william.qiu@starfivetech.com>
william.qiu [Wed, 27 Apr 2022 09:57:36 +0000 (17:57 +0800)]
dmaengine:pl080: add support for starfive jh7110 soc sec.
dd support for starfive jh7110 soc sec.
Signed-off-by: william.qiu <william.qiu@starfivetech.com>
william.qiu [Wed, 27 Apr 2022 09:03:14 +0000 (17:03 +0800)]
crypto: add patch for 5.15
crypto need this patch to work.
Signed-off-by: william.qiu <william.qiu@starfivetech.com>
projects / platform / kernel / linux-starfive.git / log