hwmon: (dell-smm-hwmon) Fix index values

[ Upstream commit 35d470b5fbc9f82feb77b56bb0d5d0b5cd73e9da ]

When support for up to 10 temp sensors and for disabling automatic BIOS
fan control was added, noone updated the index values used for
disallowing fan support and fan type calls.
Fix those values.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210513154546.12430-1-W_Armin@gmx.de
Fixes: 1bb46a20e73b ("hwmon: (dell-smm) Support up to 10 temp sensors")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: usb: cdc_ncm: don't spew notifications

[ Upstream commit de658a195ee23ca6aaffe197d1d2ea040beea0a2 ]

RTL8156 sends notifications about every 32ms.
Only display/log notifications when something changes.

This issue has been reported by others:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1832472
https://lkml.org/lkml/2020/8/27/1083

...
[785962.779840] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[785962.929944] usb 1-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00
[785962.929949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[785962.929952] usb 1-1: Product: USB 10/100/1G/2.5G LAN
[785962.929954] usb 1-1: Manufacturer: Realtek
[785962.929956] usb 1-1: SerialNumber: 000000001
[785962.991755] usbcore: registered new interface driver cdc_ether
[785963.017068] cdc_ncm 1-1:2.0: MAC-Address: 00:24:27:88:08:15
[785963.017072] cdc_ncm 1-1:2.0: setting rx_max = 16384
[785963.017169] cdc_ncm 1-1:2.0: setting tx_max = 16384
[785963.017682] cdc_ncm 1-1:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1, CDC NCM, 00:24:27:88:08:15
[785963.019211] usbcore: registered new interface driver cdc_ncm
[785963.023856] usbcore: registered new interface driver cdc_wdm
[785963.025461] usbcore: registered new interface driver cdc_mbim
[785963.038824] cdc_ncm 1-1:2.0 enx002427880815: renamed from usb0
[785963.089586] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
[785963.121673] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
[785963.153682] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected
...

This is about 2KB per second and will overwrite all contents of a 1MB
dmesg buffer in under 10 minutes rendering them useless for debugging
many kernel problems.

This is also an extra 180 MB/day in /var/logs (or 1GB per week) rendering
the majority of those logs useless too.

When the link is up (expected state), spew amount is >2x higher:
...
[786139.600992] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.632997] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
[786139.665097] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.697100] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
[786139.729094] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected
[786139.761108] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink
...

Chrome OS cannot support RTL8156 until this is fixed.

Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20210120011208.3768105-1-grundler@chromium.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: tree-checker: do not error out if extent ref hash doesn't match

commit 1119a72e223f3073a604f8fccb3a470ccd8a4416 upstream.

The tree checker checks the extent ref hash at read and write time to
make sure we do not corrupt the file system.  Generally extent
references go inline, but if we have enough of them we need to make an
item, which looks like

key.objectid = <bytenr>
key.type = <BTRFS_EXTENT_DATA_REF_KEY|BTRFS_TREE_BLOCK_REF_KEY>
key.offset = hash(tree, owner, offset)

However if key.offset collide with an unrelated extent reference we'll
simply key.offset++ until we get something that doesn't collide.
Obviously this doesn't match at tree checker time, and thus we error
while writing out the transaction.  This is relatively easy to
reproduce, simply do something like the following

  xfs_io -f -c "pwrite 0 1M" file
  offset=2

  for i in {0..10000}
  do
  xfs_io -c "reflink file 0 ${offset}M 1M" file
  offset=$(( offset + 2 ))
  done

  xfs_io -c "reflink file 0 17999258914816 1M" file
  xfs_io -c "reflink file 0 35998517829632 1M" file
  xfs_io -c "reflink file 0 53752752058368 1M" file

  btrfs filesystem sync

And the sync will error out because we'll abort the transaction.  The
magic values above are used because they generate hash collisions with
the first file in the main subvol.

The fix for this is to remove the hash value check from tree checker, as
we have no idea which offset ours should belong to.

Reported-by: Tuomas Lähdekorpi <tuomas.lahdekorpi@gmail.com>
Fixes: 0785a9aacf9d ("btrfs: tree-checker: Add EXTENT_DATA_REF check")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.10.42

Link: https://lore.kernel.org/r/20210531130657.971257589@linuxfoundation.org
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Jason Self <jason@bluehome.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: reduce power-on-good delay time of root hub

commit 90d28fb53d4a51299ff324dede015d5cb11b88a2 upstream.

Return the exactly delay time given by root hub descriptor,
this helps to reduce resume time etc.

Due to the root hub descriptor is usually provided by the host
controller driver, if there is compatibility for a root hub,
we can fix it easily without affect other root hub

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1618017645-12259-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

neighbour: Prevent Race condition in neighbour subsytem

commit eefb45eef5c4c425e87667af8f5e904fbdd47abf upstream.

Following Race Condition was detected:

<CPU A, t0>: Executing: __netif_receive_skb() ->__netif_receive_skb_core()
-> arp_rcv() -> arp_process().arp_process() calls __neigh_lookup() which
takes a reference on neighbour entry 'n'.
Moves further along, arp_process() and calls neigh_update()->
__neigh_update(). Neighbour entry is unlocked just before a call to
neigh_update_gc_list.

This unlocking paves way for another thread that may take a reference on
the same and mark it dead and remove it from gc_list.

<CPU B, t1> - neigh_flush_dev() is under execution and calls
neigh_mark_dead(n) marking the neighbour entry 'n' as dead. Also n will be
removed from gc_list.
Moves further along neigh_flush_dev() and calls
neigh_cleanup_and_release(n), but since reference count increased in t1,
'n' couldn't be destroyed.

<CPU A, t3>- Code hits neigh_update_gc_list, with neighbour entry
set as dead.

<CPU A, t4> - arp_process() finally calls neigh_release(n), destroying
the neighbour entry and we have a destroyed ntry still part of gc_list.

Fixes: eb4e8fac00d1("neighbour: Prevent a dead entry from updating gc_list")
Signed-off-by: Chinmay Agarwal <chinagar@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts/clang-tools: switch explicitly to Python 3

commit 074075aea2ff72dade5231b4ee9f2ab9a055f1ec upstream.

For the same reason as commit 51839e29cb59 ("scripts: switch explicitly
to Python 3"), switch some more scripts, which I tested and confirmed
working on Python 3.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hso: bail out on interrupt URB allocation failure

commit 4d52ebc7ace491d58f96d1f4a1cb9070c506b2e7 upstream.

Commit 31db0dbd7244 ("net: hso: check for allocation failure in
hso_create_bulk_serial_device()") recently started returning an error
when the driver fails to allocate resources for the interrupt endpoint
and tiocmget functionality.

For consistency let's bail out from probe also if the URB allocation
fails.

Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "Revert "ALSA: usx2y: Fix potential NULL pointer dereference""

commit 27b57bb76a897be80494ee11ee4e85326d19383d upstream.

This reverts commit 4667a6fc1777ce071504bab570d3599107f4790f.

Takashi writes:
I have already started working on the bigger cleanup of this driver
code based on 5.13-rc1, so could you drop this revert?

I missed our previous discussion about this, my fault for applying it.

Reported-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SUNRPC: More fixes for backlog congestion

commit e86be3a04bc4aeaf12f93af35f08f8d4385bcd98 upstream.

Ensure that we fix the XPRT_CONGESTED starvation issue for RDMA as well
as socket based transports.
Ensure we always initialise the request after waking up from the backlog
list.

Fixes: e877a88d1f06 ("SUNRPC in case of backlog, hand free slots directly to waiting task")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpftool: Add sock_release help info for cgroup attach/prog load command

commit a8deba8547e39f26440101164a3bbc2899c5b305 upstream.

The help information was not added at the time when the function got added.
Fix this and add the missing information to its cli, documentation and bash
completion.

Fixes: db94cc0b4805 ("bpftool: Add support for BPF_CGROUP_INET_SOCK_RELEASE")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20210525014139.323859-1-liujian56@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hns3: check the return of skb_checksum_help()

commit 9bb5a495424fd4bfa672eb1f31481248562fa156 upstream.

Currently skb_checksum_help()'s return is ignored, but it may
return error when it fails to allocate memory when linearizing.

So adds checking for the return of skb_checksum_help().

Fixes: 76ad4f0ee747("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Fixes: 3db084d28dc0("net: hns3: Fix for vxlan tx checksum bug")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

samples/bpf: Consider frame size in tx_only of xdpsock sample

commit 3b80d106e110d39d3f678954d3b55078669cf07e upstream.

Fix the tx_only micro-benchmark in xdpsock to take frame size into
consideration. It was hardcoded to the default value of frame_size
which is 4K. Changing this on the command line to 2K made half of the
packets illegal as they were outside the umem and were therefore
discarded by the kernel.

Fixes: 46738f73ea4f ("samples/bpf: add use of need_wakeup flag in xdpsock")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210506124349.6666-1-magnus.karlsson@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i915: fix build warning in intel_dp_get_link_status()

There is a build warning using gcc-11 showing a mis-match in the .h and .c
definitions of intel_dp_get_link_status():
  CC [M]  drivers/gpu/drm/i915/display/intel_dp.o
drivers/gpu/drm/i915/display/intel_dp.c:4139:56: warning: argument 2 of type ‘u8[6]’ {aka ‘unsigned char[6]’} with mismatched bound [-Warray-parameter=]
 4139 | intel_dp_get_link_status(struct intel_dp *intel_dp, u8 link_status[DP_LINK_STATUS_SIZE])
      |                                                     ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/gpu/drm/i915/display/intel_dp.c:51:
drivers/gpu/drm/i915/display/intel_dp.h:105:57: note: previously declared as ‘u8 *’ {aka ‘unsigned char *’}
  105 | intel_dp_get_link_status(struct intel_dp *intel_dp, u8 *link_status);
      |                                                     ~~~~^~~~~~~~~~~

This was fixed accidentally commit b30edfd8d0b4 ("drm/i915: Switch to LTTPR
non-transparent mode link training") by getting rid of the function entirely,
but that is not a viable backport for a stable kernel, so just fix up the
function definition to remove the build warning entirely.  There is no
functional change for this, and it fixes up one of the last 'make allmodconfig'
build warnings when using gcc-11 on this kernel tree.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mvpp2: add buffer header handling in RX

[ Upstream commit 17f9c1b63cdd4439523cfcdf5683e5070b911f24 ]

If Link Partner sends frames larger than RX buffer size, MAC mark it
as oversize but still would pass it to the Packet Processor.
In this scenario, Packet Processor scatter frame between multiple buffers,
but only a single buffer would be returned to the Buffer Manager pool and
it would not refill the poll.

Patch add handling of oversize error with buffer header handling, so all
buffers would be returned to the Buffer Manager pool.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: zero-initialize tc skb extension on allocation

[ Upstream commit 9453d45ecb6c2199d72e73c993e9d98677a2801b ]

Function skb_ext_add() doesn't initialize created skb extension with any
value and leaves it up to the user. However, since extension of type
TC_SKB_EXT originally contained only single value tc_skb_ext->chain its
users used to just assign the chain value without setting whole extension
memory to zero first. This assumption changed when TC_SKB_EXT extension was
extended with additional fields but not all users were updated to
initialize the new fields which leads to use of uninitialized memory
afterwards. UBSAN log:

[  778.299821] UBSAN: invalid-load in net/openvswitch/flow.c:899:28
[  778.301495] load of value 107 is not a valid value for type '_Bool'
[  778.303215] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7+ #2
[  778.304933] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[  778.307901] Call Trace:
[  778.308680]  <IRQ>
[  778.309358]  dump_stack+0xbb/0x107
[  778.310307]  ubsan_epilogue+0x5/0x40
[  778.311167]  __ubsan_handle_load_invalid_value.cold+0x43/0x48
[  778.312454]  ? memset+0x20/0x40
[  778.313230]  ovs_flow_key_extract.cold+0xf/0x14 [openvswitch]
[  778.314532]  ovs_vport_receive+0x19e/0x2e0 [openvswitch]
[  778.315749]  ? ovs_vport_find_upcall_portid+0x330/0x330 [openvswitch]
[  778.317188]  ? create_prof_cpu_mask+0x20/0x20
[  778.318220]  ? arch_stack_walk+0x82/0xf0
[  778.319153]  ? secondary_startup_64_no_verify+0xb0/0xbb
[  778.320399]  ? stack_trace_save+0x91/0xc0
[  778.321362]  ? stack_trace_consume_entry+0x160/0x160
[  778.322517]  ? lock_release+0x52e/0x760
[  778.323444]  netdev_frame_hook+0x323/0x610 [openvswitch]
[  778.324668]  ? ovs_netdev_get_vport+0xe0/0xe0 [openvswitch]
[  778.325950]  __netif_receive_skb_core+0x771/0x2db0
[  778.327067]  ? lock_downgrade+0x6e0/0x6f0
[  778.328021]  ? lock_acquire+0x565/0x720
[  778.328940]  ? generic_xdp_tx+0x4f0/0x4f0
[  778.329902]  ? inet_gro_receive+0x2a7/0x10a0
[  778.330914]  ? lock_downgrade+0x6f0/0x6f0
[  778.331867]  ? udp4_gro_receive+0x4c4/0x13e0
[  778.332876]  ? lock_release+0x52e/0x760
[  778.333808]  ? dev_gro_receive+0xcc8/0x2380
[  778.334810]  ? lock_downgrade+0x6f0/0x6f0
[  778.335769]  __netif_receive_skb_list_core+0x295/0x820
[  778.336955]  ? process_backlog+0x780/0x780
[  778.337941]  ? mlx5e_rep_tc_netdevice_event_unregister+0x20/0x20 [mlx5_core]
[  778.339613]  ? seqcount_lockdep_reader_access.constprop.0+0xa7/0xc0
[  778.341033]  ? kvm_clock_get_cycles+0x14/0x20
[  778.342072]  netif_receive_skb_list_internal+0x5f5/0xcb0
[  778.343288]  ? __kasan_kmalloc+0x7a/0x90
[  778.344234]  ? mlx5e_handle_rx_cqe_mpwrq+0x9e0/0x9e0 [mlx5_core]
[  778.345676]  ? mlx5e_xmit_xdp_frame_mpwqe+0x14d0/0x14d0 [mlx5_core]
[  778.347140]  ? __netif_receive_skb_list_core+0x820/0x820
[  778.348351]  ? mlx5e_post_rx_mpwqes+0xa6/0x25d0 [mlx5_core]
[  778.349688]  ? napi_gro_flush+0x26c/0x3c0
[  778.350641]  napi_complete_done+0x188/0x6b0
[  778.351627]  mlx5e_napi_poll+0x373/0x1b80 [mlx5_core]
[  778.352853]  __napi_poll+0x9f/0x510
[  778.353704]  ? mlx5_flow_namespace_set_mode+0x260/0x260 [mlx5_core]
[  778.355158]  net_rx_action+0x34c/0xa40
[  778.356060]  ? napi_threaded_poll+0x3d0/0x3d0
[  778.357083]  ? sched_clock_cpu+0x18/0x190
[  778.358041]  ? __common_interrupt+0x8e/0x1a0
[  778.359045]  __do_softirq+0x1ce/0x984
[  778.359938]  __irq_exit_rcu+0x137/0x1d0
[  778.360865]  irq_exit_rcu+0xa/0x20
[  778.361708]  common_interrupt+0x80/0xa0
[  778.362640]  </IRQ>
[  778.363212]  asm_common_interrupt+0x1e/0x40
[  778.364204] RIP: 0010:native_safe_halt+0xe/0x10
[  778.365273] Code: 4f ff ff ff 4c 89 e7 e8 50 3f 40 fe e9 dc fe ff ff 48 89 df e8 43 3f 40 fe eb 90 cc e9 07 00 00 00 0f 00 2d 74 05 62 00 fb f4 <c3> 90 e9 07 00 00 00 0f 00 2d 64 05 62 00 f4 c3 cc cc 0f 1f 44 00
[  778.369355] RSP: 0018:ffffffff84407e48 EFLAGS: 00000246
[  778.370570] RAX: ffff88842de46a80 RBX: ffffffff84425840 RCX: ffffffff83418468
[  778.372143] RDX: 000000000026f1da RSI: 0000000000000004 RDI: ffffffff8343af5e
[  778.373722] RBP: fffffbfff0884b08 R08: 0000000000000000 R09: ffff88842de46bcb
[  778.375292] R10: ffffed1085bc8d79 R11: 0000000000000001 R12: 0000000000000000
[  778.376860] R13: ffffffff851124a0 R14: 0000000000000000 R15: dffffc0000000000
[  778.378491]  ? rcu_eqs_enter.constprop.0+0xb8/0xe0
[  778.379606]  ? default_idle_call+0x5e/0xe0
[  778.380578]  default_idle+0xa/0x10
[  778.381406]  default_idle_call+0x96/0xe0
[  778.382350]  do_idle+0x3d4/0x550
[  778.383153]  ? arch_cpu_idle_exit+0x40/0x40
[  778.384143]  cpu_startup_entry+0x19/0x20
[  778.385078]  start_kernel+0x3c7/0x3e5
[  778.385978]  secondary_startup_64_no_verify+0xb0/0xbb

Fix the issue by providing new function tc_skb_ext_alloc() that allocates
tc skb extension and initializes its memory to 0 before returning it to the
caller. Change all existing users to use new API instead of calling
skb_ext_add() directly.

Fixes: 038ebb1a713d ("net/sched: act_ct: fix miss set mru for ovs after defrag in act_ct")
Fixes: d29334c15d33 ("net/sched: act_api: fix miss set post_ct for ovs after do conntrack in act_ct")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c

[ Upstream commit fef532ea0cd871afab7d9a7b6e9da99ac2c24371 ]

rt2880_wdt.c uses (well, attempts to use) rt_sysc_membase. However,
when this watchdog driver is built as a loadable module, there is a
build error since the rt_sysc_membase symbol is not exported.
Export it to quell the build error.

ERROR: modpost: "rt_sysc_membase" [drivers/watchdog/rt2880_wdt.ko] undefined!

Fixes: 473cf939ff34 ("watchdog: add ralink watchdog driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-watchdog@vger.kernel.org
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: alchemy: xxs1500: add gpio-au1000.h header file

[ Upstream commit ff4cff962a7eedc73e54b5096693da7f86c61346 ]

board-xxs1500.c references 2 functions without declaring them, so add
the header file to placate the build.

../arch/mips/alchemy/board-xxs1500.c: In function 'board_setup':
../arch/mips/alchemy/board-xxs1500.c:56:2: error: implicit declaration of function 'alchemy_gpio1_input_enable' [-Werror=implicit-function-declaration]
   56 |  alchemy_gpio1_input_enable();
../arch/mips/alchemy/board-xxs1500.c:57:2: error: implicit declaration of function 'alchemy_gpio2_enable'; did you mean 'alchemy_uart_enable'? [-Werror=implicit-function-declaration]
   57 |  alchemy_gpio2_enable();

Fixes: 8e026910fcd4 ("MIPS: Alchemy: merge GPR/MTX-1/XXS1500 board code into single files")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hsr: fix mac_len checks

[ Upstream commit 48b491a5cc74333c4a6a82fe21cea42c055a3b0b ]

Commit 2e9f60932a2c ("net: hsr: check skb can contain struct hsr_ethhdr
in fill_frame_info") added the following which resulted in -EINVAL
always being returned:
if (skb->mac_len < sizeof(struct hsr_ethhdr))
return -EINVAL;

mac_len was not being set correctly so this check completely broke
HSR/PRP since it was always 14, not 20.

Set mac_len correctly and modify the mac_len checks to test in the
correct places since sometimes it is legitimately 14.

Fixes: 2e9f60932a2c ("net: hsr: check skb can contain struct hsr_ethhdr in fill_frame_info")
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sch_dsmark: fix a NULL deref in qdisc_reset()

[ Upstream commit 9b76eade16423ef06829cccfe3e100cfce31afcd ]

If Qdisc_ops->init() is failed, Qdisc_ops->reset() would be called.
When dsmark_init(Qdisc_ops->init()) is failed, it possibly doesn't
initialize dsmark_qdisc_data->q. But dsmark_reset(Qdisc_ops->reset())
uses dsmark_qdisc_data->q pointer wihtout any null checking.
So, panic would occur.

Test commands:
    sysctl net.core.default_qdisc=dsmark -w
    ip link add dummy0 type dummy
    ip link add vw0 link dummy0 type virt_wifi
    ip link set vw0 up

Splat looks like:
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
CPU: 3 PID: 684 Comm: ip Not tainted 5.12.0+ #910
RIP: 0010:qdisc_reset+0x2b/0x680
Code: 1f 44 00 00 48 b8 00 00 00 00 00 fc ff df 41 57 41 56 41 55 41 54
55 48 89 fd 48 83 c7 18 53 48 89 fa 48 c1 ea 03 48 83 ec 20 <80> 3c 02
00 0f 85 09 06 00 00 4c 8b 65 18 0f 1f 44 00 00 65 8b 1d
RSP: 0018:ffff88800fda6bf8 EFLAGS: 00010282
RAX: dffffc0000000000 RBX: ffff8880050ed800 RCX: 0000000000000000
RDX: 0000000000000003 RSI: ffffffff99e34100 RDI: 0000000000000018
RBP: 0000000000000000 R08: fffffbfff346b553 R09: fffffbfff346b553
R10: 0000000000000001 R11: fffffbfff346b552 R12: ffffffffc0824940
R13: ffff888109e83800 R14: 00000000ffffffff R15: ffffffffc08249e0
FS:  00007f5042287680(0000) GS:ffff888119800000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055ae1f4dbd90 CR3: 0000000006760002 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 ? rcu_read_lock_bh_held+0xa0/0xa0
 dsmark_reset+0x3d/0xf0 [sch_dsmark]
 qdisc_reset+0xa9/0x680
 qdisc_destroy+0x84/0x370
 qdisc_create_dflt+0x1fe/0x380
 attach_one_default_qdisc.constprop.41+0xa4/0x180
 dev_activate+0x4d5/0x8c0
 ? __dev_open+0x268/0x390
 __dev_open+0x270/0x390

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ethernet: mtk_eth_soc: Fix packet statistics support for MT7628/88

[ Upstream commit ad79fd2c42f7626bdf6935cd72134c2a5a59ff2d ]

The MT7628/88 SoC(s) have other (limited) packet counter registers than
currently supported in the mtk_eth_soc driver. This patch adds support
for reading these registers, so that the packet statistics are correctly
updated.

Additionally the defines for the non-MT7628 variant packet counter
registers are added and used in this patch instead of using hard coded
values.

Signed-off-by: Stefan Roese <sr@denx.de>
Fixes: 296c9120752b ("net: ethernet: mediatek: Add MT7628/88 SoC support")
Cc: Felix Fietkau <nbd@nbd.name>
Cc: John Crispin <john@phrozen.org>
Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Reto Schneider <code@reto-schneider.ch>
Cc: Reto Schneider <reto.schneider@husqvarnagroup.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: usb-audio: scarlett2: snd_scarlett_gen2_controls_create() can be static

[ Upstream commit 2b899f31f1a6db2db4608bac2ac04fe2c4ad89eb ]

sound/usb/mixer_scarlett_gen2.c:2000:5: warning: symbol 'snd_scarlett_gen2_controls_create' was not declared. Should it be static?

Fixes: 265d1a90e4fb ("ALSA: usb-audio: scarlett2: Improve driver startup messages")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210522180900.GA83915@f59a3af2f1d9
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv6: record frag_max_size in atomic fragments in input path

[ Upstream commit e29f011e8fc04b2cdc742a2b9bbfa1b62518381a ]

Commit dbd1759e6a9c ("ipv6: on reassembly, record frag_max_size")
filled the frag_max_size field in IP6CB in the input path.
The field should also be filled in case of atomic fragments.

Fixes: dbd1759e6a9c ('ipv6: on reassembly, record frag_max_size')
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: lantiq: fix memory corruption in RX ring

[ Upstream commit c7718ee96dbc2f9c5fc3b578abdf296dd44b9c20 ]

In a situation where memory allocation or dma mapping fails, an
invalid address is programmed into the descriptor. This can lead
to memory corruption. If the memory allocation fails, DMA should
reuse the previous skb and mapping and drop the packet. This patch
also increments rx drop counter.

Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver ")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: libsas: Use _safe() loop in sas_resume_port()

[ Upstream commit 8c7e7b8486cda21269d393245883c5e4737d5ee7 ]

If sas_notify_lldd_dev_found() fails then this code calls:

sas_unregister_dev(port, dev);

which removes "dev", our list iterator, from the list.  This could lead to
an endless loop.  We need to use list_for_each_entry_safe().

Link: https://lore.kernel.org/r/YKUeq6gwfGcvvhty@mwanda
Fixes: 303694eeee5e ("[SCSI] libsas: suspend / resume support")
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: qcom: lpass-cpu: Use optional clk APIs

[ Upstream commit af2702549d68519ac78228e915d9b2c199056787 ]

This driver spits out a warning for me at boot:

 sc7180-lpass-cpu 62f00000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional null: -2

but it looks like it is all an optional clk. Use the optional clk APIs
here so that we don't see this message and everything else is the same.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Banajit Goswami <bgoswami@codeaurora.org>
Fixes: 3e53ac8230c1 ("ASoC: qcom: make osr clock optional")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210520014807.3749797-1-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: fix large MTU request from VF

[ Upstream commit 63e39d29b3da02e901349f6cd71159818a4737a6 ]

Check that the MTU value requested by the VF is in the supported
range of MTUs before attempting to set the VF large packet enable,
otherwise reject the request. This also avoids unnecessary
register updates in the case of the 82599 controller.

Fixes: 872844ddb9e4 ("ixgbe: Enable jumbo frames support w/ SR-IOV")
Co-developed-by: Piotr Skajewski <piotrx.skajewski@intel.com>
Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Co-developed-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Set mac_len in bpf_skb_change_head

[ Upstream commit 84316ca4e100d8cbfccd9f774e23817cb2059868 ]

The skb_change_head() helper did not set "skb->mac_len", which is
problematic when it's used in combination with skb_redirect_peer().
Without it, redirecting a packet from a L3 device such as wireguard to
the veth peer device will cause skb->data to point to the middle of the
IP header on entry to tcp_v4_rcv() since the L2 header is not pulled
correctly due to mac_len=0.

Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure")
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210519154743.2554771-2-joamaki@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, offload: Reorder offload callback 'prepare' in verifier

[ Upstream commit ceb11679d9fcf3fdb358a310a38760fcbe9b63ed ]

Commit 4976b718c355 ("bpf: Introduce pseudo_btf_id") switched the
order of resolve_pseudo_ldimm(), in which some pseudo instructions
are rewritten. Thus those rewritten instructions cannot be passed
to driver via 'prepare' offload callback.

Reorder the 'prepare' offload callback to fix it.

Fixes: 4976b718c355 ("bpf: Introduce pseudo_btf_id")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210520085834.15023-1-simon.horman@netronome.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs35l33: fix an error code in probe()

[ Upstream commit 833bc4cf9754643acc69b3c6b65988ca78df4460 ]

This error path returns zero (success) but it should return -EINVAL.

Fixes: 3333cb7187b9 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/YKXuyGEzhPT35R3G@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: emxx_udc: fix loop in _nbu2ss_nuke()

[ Upstream commit e0112a7c9e847ada15a631b88e279d547e8f26a7 ]

The _nbu2ss_ep_done() function calls:

list_del_init(&req->queue);

which means that the loop will never exit.

Fixes: ca3d253eb967 ("Staging: emxx_udc: Iterate list using list_for_each_entry")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YKUd0sDyjm/lkJfJ@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxgb4: avoid accessing registers when clearing filters

[ Upstream commit 88c380df84fbd03f9b137c2b9d0a44b9f2f553b0 ]

Hardware register having the server TID base can contain
invalid values when adapter is in bad state (for example,
due to AER fatal error). Reading these invalid values in the
register can lead to out-of-bound memory access. So, fix
by using the saved server TID base when clearing filters.

Fixes: b1a79360ee86 ("cxgb4: Delete all hash and TCAM filters before resource cleanup")
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Use user privilege for RID2PASID translation

[ Upstream commit 54c80d907400189b09548039be8f3b6e297e8ae3 ]

When first-level page tables are used for IOVA translation, we use user
privilege by setting U/S bit in the page table entry. This is to make it
consistent with the second level translation, where the U/S enforcement
is not available. Clear the SRE (Supervisor Request Enable) field in the
pasid table entry of RID2PASID so that requests requesting the supervisor
privilege are blocked and treated as DMA remapping faults.

Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level")
Suggested-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210512064426.3440915-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20210519015027.108468-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: put off calling register_netdev() until client initialize complete

[ Upstream commit a289a7e5c1d49b7d47df9913c1cc81fb48fab613 ]

Currently, the netdevice is registered before client initializing
complete. So there is a timewindow between netdevice available
and usable. In this case, if user try to change the channel number
or ring param, it may cause the hns3_set_rx_cpu_rmap() being called
twice, and report bug.

[47199.416502] hns3 0000:35:00.0 eth1: set channels: tqp_num=1, rxfh=0
[47199.430340] hns3 0000:35:00.0 eth1: already uninitialized
[47199.438554] hns3 0000:35:00.0: rss changes from 4 to 1
[47199.511854] hns3 0000:35:00.0: Channels changed, rss_size from 4 to 1, tqps from 4 to 1
[47200.163524] ------------[ cut here ]------------
[47200.171674] kernel BUG at lib/cpu_rmap.c:142!
[47200.177847] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[47200.185259] Modules linked in: hclge(+) hns3(-) hns3_cae(O) hns_roce_hw_v2 hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O) [last unloaded: hclge]
[47200.205912] CPU: 1 PID: 8260 Comm: ethtool Tainted: G           O      5.11.0-rc3+ #1
[47200.215601] Hardware name:  , xxxxxx 02/04/2021
[47200.223052] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[47200.230188] pc : cpu_rmap_add+0x38/0x40
[47200.237472] lr : irq_cpu_rmap_add+0x84/0x140
[47200.243291] sp : ffff800010e93a30
[47200.247295] x29: ffff800010e93a30 x28: ffff082100584880
[47200.254155] x27: 0000000000000000 x26: 0000000000000000
[47200.260712] x25: 0000000000000000 x24: 0000000000000004
[47200.267241] x23: ffff08209ba03000 x22: ffff08209ba038c0
[47200.273789] x21: 000000000000003f x20: ffff0820e2bc1680
[47200.280400] x19: ffff0820c970ec80 x18: 00000000000000c0
[47200.286944] x17: 0000000000000000 x16: ffffb43debe4a0d0
[47200.293456] x15: fffffc2082990600 x14: dead000000000122
[47200.300059] x13: ffffffffffffffff x12: 000000000000003e
[47200.306606] x11: ffff0820815b8080 x10: ffff53e411988000
[47200.313171] x9 : 0000000000000000 x8 : ffff0820e2bc1700
[47200.319682] x7 : 0000000000000000 x6 : 000000000000003f
[47200.326170] x5 : 0000000000000040 x4 : ffff800010e93a20
[47200.332656] x3 : 0000000000000004 x2 : ffff0820c970ec80
[47200.339168] x1 : ffff0820e2bc1680 x0 : 0000000000000004
[47200.346058] Call trace:
[47200.349324]  cpu_rmap_add+0x38/0x40
[47200.354300]  hns3_set_rx_cpu_rmap+0x6c/0xe0 [hns3]
[47200.362294]  hns3_reset_notify_init_enet+0x1cc/0x340 [hns3]
[47200.370049]  hns3_change_channels+0x40/0xb0 [hns3]
[47200.376770]  hns3_set_channels+0x12c/0x2a0 [hns3]
[47200.383353]  ethtool_set_channels+0x140/0x250
[47200.389772]  dev_ethtool+0x714/0x23d0
[47200.394440]  dev_ioctl+0x4cc/0x640
[47200.399277]  sock_do_ioctl+0x100/0x2a0
[47200.404574]  sock_ioctl+0x28c/0x470
[47200.409079]  __arm64_sys_ioctl+0xb4/0x100
[47200.415217]  el0_svc_common.constprop.0+0x84/0x210
[47200.422088]  do_el0_svc+0x28/0x34
[47200.426387]  el0_svc+0x28/0x70
[47200.431308]  el0_sync_handler+0x1a4/0x1b0
[47200.436477]  el0_sync+0x174/0x180
[47200.441562] Code: 11000405 79000c45 f8247861 d65f03c0 (d4210000)
[47200.448869] ---[ end trace a01efe4ce42e5f34 ]---

The process is like below:
excuting hns3_client_init
|
register_netdev()
|                           hns3_set_channels()
|                           |
hns3_set_rx_cpu_rmap()      hns3_reset_notify_uninit_enet()
|                               |
|                            quit without calling function
|                            hns3_free_rx_cpu_rmap for flag
|                            HNS3_NIC_STATE_INITED is unset.
|                           |
|                           hns3_reset_notify_init_enet()
|                               |
set HNS3_NIC_STATE_INITED    call hns3_set_rx_cpu_rmap()-- crash

Fix it by calling register_netdev() at the end of function
hns3_client_init().

Fixes: 08a100689d4b ("net: hns3: re-organize vector handle")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: fix incorrect resp_msg issue

[ Upstream commit a710b9ffbebaf713f7dbd4dbd9524907e5d66f33 ]

In hclge_mbx_handler(), if there are two consecutive mailbox
messages that requires resp_msg, the resp_msg is not cleared
after processing the first message, which will cause the resp_msg
data of second message incorrect.

Fix it by clearing the resp_msg before processing every mailbox
message.

Fixes: bb5790b71bad ("net: hns3: refactor mailbox response scheme between PF and VF")
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/virtio: Add missing MODULE_DEVICE_TABLE

[ Upstream commit 382d91fc0f4f1b13f8a0dcbf7145f4f175b71a18 ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Fixes: fa4afd78ea12 ("iommu/virtio: Build virtio-iommu as module")
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20210508031451.53493-1-cuibixuan@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gve: Correct SKB queue index validation.

[ Upstream commit fbd4a28b4fa66faaa7f510c0adc531d37e0a7848 ]

SKBs with skb_get_queue_mapping(skb) == tx_cfg.num_queues should also be
considered invalid.

Fixes: f5cedc84a30d ("gve: Add transmit and receive support")
Signed-off-by: David Awogbemila <awogbemila@google.com>
Acked-by: Willem de Brujin <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gve: Upgrade memory barrier in poll routine

[ Upstream commit f81781835f0adfae8d701545386030d223efcd6f ]

As currently written, if the driver checks for more work (via
gve_tx_poll or gve_rx_poll) before the device posts work and the
irq doorbell is not unmasked
(via iowrite32be(GVE_IRQ_ACK | GVE_IRQ_EVENT, ...)) before the device
attempts to raise an interrupt, an interrupt is lost and this could
potentially lead to the traffic being completely halted. For
example, if a tx queue has already been stopped, the driver won't get
the chance to complete work and egress will be halted.

We need a full memory barrier in the poll
routine to ensure that the irq doorbell is unmasked before the driver
checks for more work.

Fixes: f5cedc84a30d ("gve: Add transmit and receive support")
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
Acked-by: Willem de Brujin <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gve: Add NULL pointer checks when freeing irqs.

[ Upstream commit 5218e919c8d06279884aa0baf76778a6817d5b93 ]

When freeing notification blocks, we index priv->msix_vectors.
If we failed to allocate priv->msix_vectors (see abort_with_msix_vectors)
this could lead to a NULL pointer dereference if the driver is unloaded.

Fixes: 893ce44df565 ("gve: Add basic driver framework for Compute Engine Virtual NIC")
Signed-off-by: David Awogbemila <awogbemila@google.com>
Acked-by: Willem de Brujin <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gve: Update mgmt_msix_idx if num_ntfy changes

[ Upstream commit e96b491a0ffa35a8a9607c193fa4d894ca9fb32f ]

If we do not get the expected number of vectors from
pci_enable_msix_range, we update priv->num_ntfy_blks but not
priv->mgmt_msix_idx. This patch fixes this so that priv->mgmt_msix_idx
is updated accordingly.

Fixes: f5cedc84a30d ("gve: Add transmit and receive support")
Signed-off-by: David Awogbemila <awogbemila@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gve: Check TX QPL was actually assigned

[ Upstream commit 5aec55b46c6238506cdf0c60cd0e42ab77a1e5e0 ]

Correctly check the TX QPL was assigned and unassigned if
other steps in the allocation fail.

Fixes: f5cedc84a30d (gve: Add transmit and receive support)
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: remove device from smcd_dev_list after failed device_add()

[ Upstream commit 444d7be9532dcfda8e0385226c862fd7e986f607 ]

If the device_add() for a smcd_dev fails, there's no cleanup step that
rolls back the earlier list_add(). The device subsequently gets freed,
and we end up with a corrupted list.

Add some error handling that removes the device from the list.

Fixes: c6ba7c9ba43d ("net/smc: add base infrastructure for SMC-D and ISM")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mld: fix panic in mld_newpack()

[ Upstream commit 020ef930b826d21c5446fdc9db80fd72a791bc21 ]

mld_newpack() doesn't allow to allocate high order page,
only order-0 allocation is allowed.
If headroom size is too large, a kernel panic could occur in skb_put().

Test commands:
    ip netns del A
    ip netns del B
    ip netns add A
    ip netns add B
    ip link add veth0 type veth peer name veth1
    ip link set veth0 netns A
    ip link set veth1 netns B

    ip netns exec A ip link set lo up
    ip netns exec A ip link set veth0 up
    ip netns exec A ip -6 a a 2001:db8:0::1/64 dev veth0
    ip netns exec B ip link set lo up
    ip netns exec B ip link set veth1 up
    ip netns exec B ip -6 a a 2001:db8:0::2/64 dev veth1
    for i in {1..99}
    do
        let A=$i-1
        ip netns exec A ip link add ip6gre$i type ip6gre \
local 2001:db8:$A::1 remote 2001:db8:$A::2 encaplimit 100
        ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev ip6gre$i
        ip netns exec A ip link set ip6gre$i up

        ip netns exec B ip link add ip6gre$i type ip6gre \
local 2001:db8:$A::2 remote 2001:db8:$A::1 encaplimit 100
        ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev ip6gre$i
        ip netns exec B ip link set ip6gre$i up
    done

Splat looks like:
kernel BUG at net/core/skbuff.c:110!
invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.12.0+ #891
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:skb_panic+0x15d/0x15f
Code: 92 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 00 ae 79 83
41 57 41 56 41 55 48 8b 54 24 a6 26 f9 ff <0f> 0b 48 8b 6c 24 20 89
34 24 e8 4a 4e 92 fe 8b 34 24 48 c7 c1 20
RSP: 0018:ffff88810091f820 EFLAGS: 00010282
RAX: 0000000000000089 RBX: ffff8881086e9000 RCX: 0000000000000000
RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed1020123efb
RBP: ffff888005f6eac0 R08: ffffed1022fc0031 R09: ffffed1022fc0031
R10: ffff888117e00187 R11: ffffed1022fc0030 R12: 0000000000000028
R13: ffff888008284eb0 R14: 0000000000000ed8 R15: 0000000000000ec0
FS:  0000000000000000(0000) GS:ffff888117c00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8b801c5640 CR3: 0000000033c2c006 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 ? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600
 ? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600
 skb_put.cold.104+0x22/0x22
 ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600
 ? rcu_read_lock_sched_held+0x91/0xc0
 mld_newpack+0x398/0x8f0
 ? ip6_mc_hdr.isra.26.constprop.46+0x600/0x600
 ? lock_contended+0xc40/0xc40
 add_grhead.isra.33+0x280/0x380
 add_grec+0x5ca/0xff0
 ? mld_sendpack+0xf40/0xf40
 ? lock_downgrade+0x690/0x690
 mld_send_initial_cr.part.34+0xb9/0x180
 ipv6_mc_dad_complete+0x15d/0x1b0
 addrconf_dad_completed+0x8d2/0xbb0
 ? lock_downgrade+0x690/0x690
 ? addrconf_rs_timer+0x660/0x660
 ? addrconf_dad_work+0x73c/0x10e0
 addrconf_dad_work+0x73c/0x10e0

Allowing high order page allocation could fix this problem.

Fixes: 72e09ad107e7 ("ipv6: avoid high order allocations")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Fix context memory setup for 64K page size.

[ Upstream commit 702279d2ce4650000bb6302013630304e359dc13 ]

There was a typo in the code that checks for 64K BNXT_PAGE_SHIFT in
bnxt_hwrm_set_pg_attr().  Fix it and make the code more understandable
with a new macro BNXT_SET_CTX_PAGE_ATTR().

Fixes: 1b9394e5a2ad ("bnxt_en: Configure context memory on new devices.")
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Include new P5 HV definition in VF check.

[ Upstream commit ab21494be9dc7d62736c5fcd06be65d49df713ee ]

Otherwise, some of the recently added HyperV VF IDs would not be
recognized as VF devices and they would not initialize properly.

Fixes: 7fbf359bb2c1 ("bnxt_en: Add PCI IDs for Hyper-V VF devices.")
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bnx2: Fix error return code in bnx2_init_board()

[ Upstream commit 28c66b6da4087b8cfe81c2ec0a46eb6116dafda9 ]

Fix to return -EPERM from the error handling case instead of 0, as done
elsewhere in this function.

Fixes: b6016b767397 ("[BNX2]: New Broadcom gigabit network driver.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hso: check for allocation failure in hso_create_bulk_serial_device()

[ Upstream commit 31db0dbd72444abe645d90c20ecb84d668f5af5e ]

In current kernels, small allocations never actually fail so this
patch shouldn't affect runtime.

Originally this error handling code written with the idea that if
the "serial->tiocmget" allocation failed, then we would continue
operating instead of bailing out early.  But in later years we added
an unchecked dereference on the next line.

serial->tiocmget->serial_state_notification = kzalloc();
        ^^^^^^^^^^^^^^^^^^

Since these allocations are never going fail in real life, this is
mostly a philosophical debate, but I think bailing out early is the
correct behavior that the user would want.  And generally it's safer to
bail as soon an error happens.

Fixes: af0de1303c4e ("usb: hso: obey DMA rules in tiocmget")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: fix tx action reschedule issue with stopped queue

[ Upstream commit dcad9ee9e0663d74a89b25b987f9c7be86432812 ]

The netdev qeueue might be stopped when byte queue limit has
reached or tx hw ring is full, net_tx_action() may still be
rescheduled if STATE_MISSED is set, which consumes unnecessary
cpu without dequeuing and transmiting any skb because the
netdev queue is stopped, see qdisc_run_end().

This patch fixes it by checking the netdev queue state before
calling qdisc_run() and clearing STATE_MISSED if netdev queue is
stopped during qdisc_run(), the net_tx_action() is rescheduled
again when netdev qeueue is restarted, see netif_tx_wake_queue().

As there is time window between netif_xmit_frozen_or_stopped()
checking and STATE_MISSED clearing, between which STATE_MISSED
may set by net_tx_action() scheduled by netif_tx_wake_queue(),
so set the STATE_MISSED again if netdev queue is restarted.

Fixes: 6b3ba9146fe6 ("net: sched: allow qdiscs to handle locking")
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: fix tx action rescheduling issue during deactivation

[ Upstream commit 102b55ee92f9fda4dde7a45d2b20538e6e3e3d1e ]

Currently qdisc_run() checks the STATE_DEACTIVATED of lockless
qdisc before calling __qdisc_run(), which ultimately clear the
STATE_MISSED when all the skb is dequeued. If STATE_DEACTIVATED
is set before clearing STATE_MISSED, there may be rescheduling
of net_tx_action() at the end of qdisc_run_end(), see below:

CPU0(net_tx_atcion)  CPU1(__dev_xmit_skb)  CPU2(dev_deactivate)
          .                   .                     .
          .            set STATE_MISSED             .
          .           __netif_schedule()            .
          .                   .           set STATE_DEACTIVATED
          .                   .                qdisc_reset()
          .                   .                     .
          .<---------------   .              synchronize_net()
clear __QDISC_STATE_SCHED  |  .                     .
          .                |  .                     .
          .                |  .            some_qdisc_is_busy()
          .                |  .               return *false*
          .                |  .                     .
  test STATE_DEACTIVATED   |  .                     .
__qdisc_run() *not* called |  .                     .
          .                |  .                     .
   test STATE_MISS         |  .                     .
 __netif_schedule()--------|  .                     .
          .                   .                     .
          .                   .                     .

__qdisc_run() is not called by net_tx_atcion() in CPU0 because
CPU2 has set STATE_DEACTIVATED flag during dev_deactivate(), and
STATE_MISSED is only cleared in __qdisc_run(), __netif_schedule
is called at the end of qdisc_run_end(), causing tx action
rescheduling problem.

qdisc_run() called by net_tx_action() runs in the softirq context,
which should has the same semantic as the qdisc_run() called by
__dev_xmit_skb() protected by rcu_read_lock_bh(). And there is a
synchronize_net() between STATE_DEACTIVATED flag being set and
qdisc_reset()/some_qdisc_is_busy in dev_deactivate(), we can safely
bail out for the deactived lockless qdisc in net_tx_action(), and
qdisc_reset() will reset all skb not dequeued yet.

So add the rcu_read_lock() explicitly to protect the qdisc_run()
and do the STATE_DEACTIVATED checking in net_tx_action() before
calling qdisc_run_begin(). Another option is to do the checking in
the qdisc_run_end(), but it will add unnecessary overhead for
non-tx_action case, because __dev_queue_xmit() will not see qdisc
with STATE_DEACTIVATED after synchronize_net(), the qdisc with
STATE_DEACTIVATED can only be seen by net_tx_action() because of
__netif_schedule().

The STATE_DEACTIVATED checking in qdisc_run() is to avoid race
between net_tx_action() and qdisc_reset(), see:
commit d518d2ed8640 ("net/sched: fix race between deactivation
and dequeue for NOLOCK qdisc"). As the bailout added above for
deactived lockless qdisc in net_tx_action() provides better
protection for the race without calling qdisc_run() at all, so
remove the STATE_DEACTIVATED checking in qdisc_run().

After qdisc_reset(), there is no skb in qdisc to be dequeued, so
clear the STATE_MISSED in dev_reset_queue() too.

Fixes: 6b3ba9146fe6 ("net: sched: allow qdiscs to handle locking")
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
V8: Clearing STATE_MISSED before calling __netif_schedule() has
    avoid the endless rescheduling problem, but there may still
    be a unnecessary rescheduling, so adjust the commit log.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: fix packet stuck problem for lockless qdisc

[ Upstream commit a90c57f2cedd52a511f739fb55e6244e22e1a2fb ]

Lockless qdisc has below concurrent problem:
    cpu0                 cpu1
     .                     .
q->enqueue                 .
     .                     .
qdisc_run_begin()          .
     .                     .
dequeue_skb()              .
     .                     .
sch_direct_xmit()          .
     .                     .
     .                q->enqueue
     .             qdisc_run_begin()
     .            return and do nothing
     .                     .
qdisc_run_end()            .

cpu1 enqueue a skb without calling __qdisc_run() because cpu0
has not released the lock yet and spin_trylock() return false
for cpu1 in qdisc_run_begin(), and cpu0 do not see the skb
enqueued by cpu1 when calling dequeue_skb() because cpu1 may
enqueue the skb after cpu0 calling dequeue_skb() and before
cpu0 calling qdisc_run_end().

Lockless qdisc has below another concurrent problem when
tx_action is involved:

cpu0(serving tx_action)     cpu1             cpu2
          .                   .                .
          .              q->enqueue            .
          .            qdisc_run_begin()       .
          .              dequeue_skb()         .
          .                   .            q->enqueue
          .                   .                .
          .             sch_direct_xmit()      .
          .                   .         qdisc_run_begin()
          .                   .       return and do nothing
          .                   .                .
 clear __QDISC_STATE_SCHED    .                .
 qdisc_run_begin()            .                .
 return and do nothing        .                .
          .                   .                .
          .            qdisc_run_end()         .

This patch fixes the above data race by:
1. If the first spin_trylock() return false and STATE_MISSED is
   not set, set STATE_MISSED and retry another spin_trylock() in
   case other CPU may not see STATE_MISSED after it releases the
   lock.
2. reschedule if STATE_MISSED is set after the lock is released
   at the end of qdisc_run_end().

For tx_action case, STATE_MISSED is also set when cpu1 is at the
end if qdisc_run_end(), so tx_action will be rescheduled again
to dequeue the skb enqueued by cpu2.

Clear STATE_MISSED before retrying a dequeuing when dequeuing
returns NULL in order to reduce the overhead of the second
spin_trylock() and __netif_schedule() calling.

Also clear the STATE_MISSED before calling __netif_schedule()
at the end of qdisc_run_end() to avoid doing another round of
dequeuing in the pfifo_fast_dequeue().

The performance impact of this patch, tested using pktgen and
dummy netdev with pfifo_fast qdisc attached:

 threads  without+this_patch   with+this_patch      delta
    1        2.61Mpps            2.60Mpps           -0.3%
    2        3.97Mpps            3.82Mpps           -3.7%
    4        5.62Mpps            5.59Mpps           -0.5%
    8        2.78Mpps            2.77Mpps           -0.3%
   16        2.22Mpps            2.22Mpps           -0.0%

Fixes: 6b3ba9146fe6 ("net: sched: allow qdiscs to handle locking")
Acked-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT

[ Upstream commit 974271e5ed45cfe4daddbeb16224a2156918530e ]

In tls_sw_splice_read, checkout MSG_* is inappropriate, should use
SPLICE_*, update tls_wait_data to accept nonblock arguments instead
of flags for recvmsg and splice.

Fixes: c46234ebb4d1 ("tls: RX path for ktls")
Signed-off-by: Jim Ma <majinjing3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

openvswitch: meter: fix race when getting now_ms.

[ Upstream commit e4df1b0c24350a0f00229ff895a91f1072bd850d ]

We have observed meters working unexpected if traffic is 3+Gbit/s
with multiple connections.

now_ms is not pretected by meter->lock, we may get a negative
long_delta_ms when another cpu updated meter->used, then:
    delta_ms = (u32)long_delta_ms;
which will be a large value.

    band->bucket += delta_ms * band->rate;
then we get a wrong band->bucket.

OpenVswitch userspace datapath has fixed the same issue[1] some
time ago, and we port the implementation to kernel datapath.

[1] https://patchwork.ozlabs.org/project/openvswitch/patch/20191025114436.9746-1-i.maximets@ovn.org/

Fixes: 96fbc13d7e77 ("openvswitch: Add meter infrastructure")
Signed-off-by: Tao Liu <thomas.liu@ucloud.cn>
Suggested-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxgb4/ch_ktls: Clear resources when pf4 device is removed

[ Upstream commit 65e302a9bd57b62872040d57eea1201562a7cbb2 ]

This patch maintain the list of active tids and clear all the active
connection resources when DETACH notification comes.

Fixes: a8c16e8ed624f ("crypto/chcr: move nic TLS functionality to drivers/net")
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mdio: octeon: Fix some double free issues

[ Upstream commit e1d027dd97e1e750669cdc0d3b016a4f54e473eb ]

'bus->mii_bus' has been allocated with 'devm_mdiobus_alloc_size()' in the
probe function. So it must not be freed explicitly or there will be a
double free.

Remove the incorrect 'mdiobus_free' in the error handling path of the
probe function and in remove function.

Suggested-By: Andrew Lunn <andrew@lunn.ch>
Fixes: 35d2aeac9810 ("phy: mdio-octeon: Use devm_mdiobus_alloc_size()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mdio: thunder: Fix a double free issue in the .remove function

[ Upstream commit a93a0a15876d2a077a3bc260b387d2457a051f24 ]

'bus->mii_bus' have been allocated with 'devm_mdiobus_alloc_size()' in the
probe function. So it must not be freed explicitly or there will be a
double free.

Remove the incorrect 'mdiobus_free' in the remove function.

Fixes: 379d7ac7ca31 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

chelsio/chtls: unlock on error in chtls_pt_recvmsg()

[ Upstream commit 832ce924b1a14e139e184a6da9f5a69a5e47b256 ]

This error path needs to release some memory and call release_sock(sk);
before returning.

Fixes: 6919a8264a32 ("Crypto/chtls: add/delete TLS header in driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fec: fix the potential memory leak in fec_enet_init()

[ Upstream commit 619fee9eb13b5d29e4267cb394645608088c28a8 ]

If the memory allocated for cbd_base is failed, it should
free the memory allocated for the queues, otherwise it causes
memory leak.

And if the memory allocated for the queues is failed, it can
return error directly.

Fixes: 59d0f7465644 ("net: fec: init multi queue date structure")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: packetmmap: fix only tx timestamp on request

[ Upstream commit 171c3b151118a2fe0fc1e2a9d1b5a1570cfe82d2 ]

The packetmmap tx ring should only return timestamps if requested via
setsockopt PACKET_TIMESTAMP, as documented. This allows compatibility
with non-timestamp aware user-space code which checks
tp_status == TP_STATUS_AVAILABLE; not expecting additional timestamp
flags to be set in tp_status.

Fixes: b9c32fb27170 ("packet: if hw/sw ts enabled in rx/tx ring, report which ts we got")
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Richard Sanger <rsanger@wand.net.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: really orphan skbs tied to closing sk

[ Upstream commit 098116e7e640ba677d9e345cbee83d253c13d556 ]

If the owing socket is shutting down - e.g. the sock reference
count already dropped to 0 and only sk_wmem_alloc is keeping
the sock alive, skb_orphan_partial() becomes a no-op.

When forwarding packets over veth with GRO enabled, the above
causes refcount errors.

This change addresses the issue with a plain skb_orphan() call
in the critical scenario.

Fixes: 9adc89af724f ("net: let skb_orphan_partial wake-up waiters.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: Assume GPIO CS active high in ACPI case

[ Upstream commit 6b69546912a57ff8c31061f98e56383cc0beffd3 ]

Currently GPIO CS handling, when descriptors are in use, doesn't
take into consideration that in ACPI case the default polarity
is Active High and can't be altered. Instead we have to use the
per-chip definition provided by SPISerialBus() resource.

Fixes: 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors")
Cc: Liguang Zhang <zhangliguang@linux.alibaba.com>
Cc: Jay Fang <f.fangjian@huawei.com>
Cc: Sven Van Asbroeck <thesven73@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20210511140912.30757-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio-ccw: Check initialized flag in cp_init()

[ Upstream commit c6c82e0cd8125d30f2f1b29205c7e1a2f1a6785b ]

We have a really nice flag in the channel_program struct that
indicates if it had been initialized by cp_init(), and use it
as a guard in the other cp accessor routines, but not for a
duplicate call into cp_init(). The possibility of this occurring
is low, because that flow is protected by the private->io_mutex
and FSM CP_PROCESSING state. But then why bother checking it
in (for example) cp_prefetch() then?

Let's just be consistent and check for that in cp_init() too.

Fixes: 71189f263f8a3 ("vfio-ccw: make it safe to access channel programs")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20210511195631.3995081-2-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ipa: memory region array is variable size

[ Upstream commit 440c3247cba3d9433ac435d371dd7927d68772a7 ]

IPA configuration data includes an array of memory region
descriptors.  That was a fixed-size array at one time, but
at some point we started defining it such that it was only
as big as required for a given platform.  The actual number
of entries in the array is recorded in the configuration data
along with the array.

A loop in ipa_mem_config() still assumes the array has entries
for all defined memory region IDs.  As a result, this loop can
go past the end of the actual array and attempt to write
"canary" values based on nonsensical data.

Fix this, by stashing the number of entries in the array, and
using that rather than IPA_MEM_COUNT in the initialization loop
found in ipa_mem_config().

The only remaining use of IPA_MEM_COUNT is in a validation check
to ensure configuration data doesn't have too many entries.
That's fine for now.

Fixes: 3128aae8c439a ("net: ipa: redefine struct ipa_mem_data")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: stmmac: Fix MAC WoL not working if PHY does not support WoL

[ Upstream commit 576f9eacc680d2b1f37e8010cff62f7b227ea769 ]

Both get and set WoL will check device_can_wakeup(), if MAC supports PMT, it
will set device wakeup capability. After commit 1d8e5b0f3f2c ("net: stmmac:
Support WOL with phy"), device wakeup capability will be overwrite in
stmmac_init_phy() according to phy's Wol feature. If phy doesn't support WoL,
then MAC will lose wakeup capability. To fix this issue, only overwrite device
wakeup capability when MAC doesn't support PMT.

For STMMAC now driver checks MAC's WoL capability if MAC supports PMT, if
not support, driver will check PHY's WoL capability.

Fixes: 1d8e5b0f3f2c ("net: stmmac: Support WOL with phy")
Reviewed-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs42l42: Regmap must use_single_read/write

[ Upstream commit 0fad605fb0bdc00d8ad78696300ff2fbdee6e048 ]

cs42l42 does not support standard burst transfers so the use_single_read
and use_single_write flags must be set in the regmap config.

Because of this bug, the patch:

commit 0a0eb567e1d4 ("ASoC: cs42l42: Minor error paths fixups")

broke cs42l42 probe() because without the use_single_* flags it causes
regmap to issue a burst read.

However, the missing use_single_* could cause problems anyway because the
regmap cache can attempt burst transfers if these flags are not set.

Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210511132855.27159-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: Add missing MODULE_DEVICE_TABLE

[ Upstream commit 1fd86e280d8b21762901e43d42d66dbfe8b8e0d3 ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1620704673-104205-1-git-send-email-zou_wei@huawei.com
Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support")
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

interconnect: qcom: bcm-voter: add a missing of_node_put()

[ Upstream commit a00593737f8bac2c9e97b696e7ff84a4446653e8 ]

Add a missing of_node_put() in of_bcm_voter_get() to avoid the
reference leak.

Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/1619116570-13308-1-git-send-email-subbaram@codeaurora.org
Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support")
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: fix error code getting shifted with 4 in dsa_slave_get_sset_count

[ Upstream commit b94cbc909f1d80378a1f541968309e5c1178c98b ]

DSA implements a bunch of 'standardized' ethtool statistics counters,
namely tx_packets, tx_bytes, rx_packets, rx_bytes. So whatever the
hardware driver returns in .get_sset_count(), we need to add 4 to that.

That is ok, except that .get_sset_count() can return a negative error
code, for example:

b53_get_sset_count
-> phy_ethtool_get_sset_count
   -> return -EIO

-EIO is -5, and with 4 added to it, it becomes -1, aka -EPERM. One can
imagine that certain error codes may even become positive, although
based on code inspection I did not see instances of that.

Check the error code first, if it is negative return it as-is.

Based on a similar patch for dsa_master_get_strings from Dan Carpenter:
https://patchwork.kernel.org/project/netdevbpf/patch/YJaSe3RPgn7gKxZv@mwanda/

Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: netcp: Fix an error message

[ Upstream commit ddb6e00f8413e885ff826e32521cff7924661de0 ]

'ret' is known to be 0 here.
The expected error code is stored in 'tx_pipe->dma_queue', so use it
instead.

While at it, switch from %d to %pe which is more user friendly.

Fixes: 84640e27f230 ("net: netcp: Add Keystone NetCP core ethernet driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

linux/bits.h: fix compilation error with GENMASK

[ Upstream commit f747e6667ebb2ffb8133486c9cd19800d72b0d98 ]

GENMASK() has an input check which uses __builtin_choose_expr() to
enable a compile time sanity check of its inputs if they are known at
compile time.

However, it turns out that __builtin_constant_p() does not always return
a compile time constant [0].  It was thought this problem was fixed with
gcc 4.9 [1], but apparently this is not the case [2].

Switch to use __is_constexpr() instead which always returns a compile time
constant, regardless of its inputs.

Link: https://lore.kernel.org/lkml/42b4342b-aefc-a16a-0d43-9f9c0d63ba7a@rasmusvillemoes.dk
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=19449
Link: https://lore.kernel.org/lkml/1ac7bbc2-45d9-26ed-0b33-bf382b8d858b@I-love.SAKURA.ne.jp
Link: https://lkml.kernel.org/r/20210511203716.117010-1-rikard.falkeborn@gmail.com
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: fix a race between del_gendisk and BLKRRPART

[ Upstream commit bc6a385132601c29a6da1dbf8148c0d3c9ad36dc ]

When BLKRRPART is called concurrently with del_gendisk, the partitions
rescan can create a stale partition that will never be be cleaned up.

Fix this by checking the the disk is up before rescanning partitions
while under bd_mutex.

Signed-off-by: Gulam Mohamed <gulam.mohamed@oracle.com>
[hch: split from a larger patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210514131842.1600568-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: touchscreen_dmi: Add info for the Chuwi Hi10 Pro (CWI529) tablet

[ Upstream commit e68671e9e1275dfdda333c3e83b6d28963af16b6 ]

Add touchscreen info for the Chuwi Hi10 Pro (CWI529) tablet. This includes
info for getting the firmware directly from the UEFI, so that the user does
not need to manually install the firmware in /lib/firmware/silead.

This change will make the touchscreen on these devices work OOTB,
without requiring any manual setup.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210520093228.7439-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: stop touching sched.ready in the backend

[ Upstream commit a2b4785f01280a4291edb9fda69032fc2e4bfd3f ]

This unfortunately comes up in regular intervals and breaks
GPU reset for the engine in question.

The sched.ready flag controls if an engine can't get working
during hw_init, but should never be set to false during hw_fini.

v2: squash in unused variable fix (Alex)

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/amdgpu: fix a potential deadlock in gpu reset

[ Upstream commit 9c2876d56f1ce9b6b2072f1446fb1e8d1532cb3d ]

When amdgpu_ib_ring_tests failed, the reset logic called
amdgpu_device_ip_suspend twice, then deadlock occurred.
Deadlock log:

[  805.655192] amdgpu 0000:04:00.0: amdgpu: ib ring test failed (-110).
[  806.290952] [drm] free PSP TMR buffer

[  806.319406] ============================================
[  806.320315] WARNING: possible recursive locking detected
[  806.321225] 5.11.0-custom #1 Tainted: G        W  OEL
[  806.322135] --------------------------------------------
[  806.323043] cat/2593 is trying to acquire lock:
[  806.323825] ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu]
[  806.325668]
               but task is already holding lock:
[  806.326664] ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu]
[  806.328430]
               other info that might help us debug this:
[  806.329539]  Possible unsafe locking scenario:

[  806.330549]        CPU0
[  806.330983]        ----
[  806.331416]   lock(&adev->dm.dc_lock);
[  806.332086]   lock(&adev->dm.dc_lock);
[  806.332738]
                *** DEADLOCK ***

[  806.333747]  May be due to missing lock nesting notation

[  806.334899] 3 locks held by cat/2593:
[  806.335537]  #0: ffff888100d3f1b8 (&attr->mutex){+.+.}-{3:3}, at: simple_attr_read+0x4e/0x110
[  806.337009]  #1: ffff888136b1fd78 (&adev->reset_sem){++++}-{3:3}, at: amdgpu_device_lock_adev+0x42/0x94 [amdgpu]
[  806.339018]  #2: ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu]
[  806.340869]
               stack backtrace:
[  806.341621] CPU: 6 PID: 2593 Comm: cat Tainted: G        W  OEL    5.11.0-custom #1
[  806.342921] Hardware name: AMD Celadon-CZN/Celadon-CZN, BIOS WLD0C23N_Weekly_20_12_2 12/23/2020
[  806.344413] Call Trace:
[  806.344849]  dump_stack+0x93/0xbd
[  806.345435]  __lock_acquire.cold+0x18a/0x2cf
[  806.346179]  lock_acquire+0xca/0x390
[  806.346807]  ? dm_suspend+0xb8/0x1d0 [amdgpu]
[  806.347813]  __mutex_lock+0x9b/0x930
[  806.348454]  ? dm_suspend+0xb8/0x1d0 [amdgpu]
[  806.349434]  ? amdgpu_device_indirect_rreg+0x58/0x70 [amdgpu]
[  806.350581]  ? _raw_spin_unlock_irqrestore+0x47/0x50
[  806.351437]  ? dm_suspend+0xb8/0x1d0 [amdgpu]
[  806.352437]  ? rcu_read_lock_sched_held+0x4f/0x80
[  806.353252]  ? rcu_read_lock_sched_held+0x4f/0x80
[  806.354064]  mutex_lock_nested+0x1b/0x20
[  806.354747]  ? mutex_lock_nested+0x1b/0x20
[  806.355457]  dm_suspend+0xb8/0x1d0 [amdgpu]
[  806.356427]  ? soc15_common_set_clockgating_state+0x17d/0x19 [amdgpu]
[  806.357736]  amdgpu_device_ip_suspend_phase1+0x78/0xd0 [amdgpu]
[  806.360394]  amdgpu_device_ip_suspend+0x21/0x70 [amdgpu]
[  806.362926]  amdgpu_device_pre_asic_reset+0xb3/0x270 [amdgpu]
[  806.365560]  amdgpu_device_gpu_recover.cold+0x679/0x8eb [amdgpu]

Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Acked-by: Christian KÃnig <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Fix a use-after-free

[ Upstream commit 1e5c37385097c35911b0f8a0c67ffd10ee1af9a2 ]

looks like we forget to set ttm->sg to NULL.
Hit panic below

[ 1235.844104] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b7b4b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 1235.989074] Call Trace:
[ 1235.991751]  sg_free_table+0x17/0x20
[ 1235.995667]  amdgpu_ttm_backend_unbind.cold+0x4d/0xf7 [amdgpu]
[ 1236.002288]  amdgpu_ttm_backend_destroy+0x29/0x130 [amdgpu]
[ 1236.008464]  ttm_tt_destroy+0x1e/0x30 [ttm]
[ 1236.013066]  ttm_bo_cleanup_memtype_use+0x51/0xa0 [ttm]
[ 1236.018783]  ttm_bo_release+0x262/0xa50 [ttm]
[ 1236.023547]  ttm_bo_put+0x82/0xd0 [ttm]
[ 1236.027766]  amdgpu_bo_unref+0x26/0x50 [amdgpu]
[ 1236.032809]  amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x7aa/0xd90 [amdgpu]
[ 1236.040400]  kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu]
[ 1236.046912]  kfd_ioctl+0x463/0x690 [amdgpu]

Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/amdgpu: fix refcount leak

[ Upstream commit fa7e6abc75f3d491bc561734312d065dc9dc2a77 ]

[Why]
the gem object rfb->base.obj[0] is get according to num_planes
in amdgpufb_create, but is not put according to num_planes

[How]
put rfb->base.obj[0] in amdgpu_fbdev_destroy according to num_planes

Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Disconnect non-DP with no EDID

[ Upstream commit 080039273b126eeb0185a61c045893a25dbc046e ]

[Why]
Active DP dongles return no EDID when dongle
is connected, but VGA display is taken out.
Current driver behavior does not remove the
active display when this happens, and this is
a gap between dongle DTP and dongle behavior.

[How]
For active DP dongles and non-DP scenario,
disconnect sink on detection when no EDID
is read due to timeout.

Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SMB3: incorrect file id in requests compounded with open

[ Upstream commit c0d46717b95735b0eacfddbcca9df37a49de9c7a ]

See MS-SMB2 3.2.4.1.4, file ids in compounded requests should be set to
0xFFFFFFFFFFFFFFFF (we were treating it as u32 not u64 and setting
it incorrectly).

Signed-off-by: Steve French <stfrench@microsoft.com>
Reported-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: touchscreen_dmi: Add info for the Mediacom Winpad 7.0 W700 tablet

[ Upstream commit 39a6172ea88b3117353ae16cbb0a53cd80a9340a ]

Add touchscreen info for the Mediacom Winpad 7.0 W700 tablet.
Tested on 5.11 hirsute.
Note: it's hw clone to Wintron surftab 7.

Signed-off-by: Teava Radu <rateava@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210504185746.175461-6-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: intel_punit_ipc: Append MODULE_DEVICE_TABLE for ACPI

[ Upstream commit bc1eca606d8084465e6f89fd646cc71defbad490 ]

The intel_punit_ipc driver might be compiled as a module.
When udev handles the event of the devices appearing
the intel_punit_ipc module is missing.

Append MODULE_DEVICE_TABLE for ACPI case to fix the loading issue.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210519101521.79338-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: hp-wireless: add AMD's hardware id to the supported list

[ Upstream commit f048630bdd55eb5379ef35f971639fe52fabe499 ]

Newer AMD based laptops uses AMDI0051 as the hardware id to support the
airplane mode button. Adding this to the supported list.

Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20210514180047.1697543-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: do not BUG_ON in link_to_fixup_dir

[ Upstream commit 91df99a6eb50d5a1bc70fff4a09a0b7ae6aab96d ]

While doing error injection testing I got the following panic

  kernel BUG at fs/btrfs/tree-log.c:1862!
  invalid opcode: 0000 [#1] SMP NOPTI
  CPU: 1 PID: 7836 Comm: mount Not tainted 5.13.0-rc1+ #305
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
  RIP: 0010:link_to_fixup_dir+0xd5/0xe0
  RSP: 0018:ffffb5800180fa30 EFLAGS: 00010216
  RAX: fffffffffffffffb RBX: 00000000fffffffb RCX: ffff8f595287faf0
  RDX: ffffb5800180fa37 RSI: ffff8f5954978800 RDI: 0000000000000000
  RBP: ffff8f5953af9450 R08: 0000000000000019 R09: 0000000000000001
  R10: 000151f408682970 R11: 0000000120021001 R12: ffff8f5954978800
  R13: ffff8f595287faf0 R14: ffff8f5953c77dd0 R15: 0000000000000065
  FS:  00007fc5284c8c40(0000) GS:ffff8f59bbd00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007fc5287f47c0 CR3: 000000011275e002 CR4: 0000000000370ee0
  Call Trace:
   replay_one_buffer+0x409/0x470
   ? btree_read_extent_buffer_pages+0xd0/0x110
   walk_up_log_tree+0x157/0x1e0
   walk_log_tree+0xa6/0x1d0
   btrfs_recover_log_trees+0x1da/0x360
   ? replay_one_extent+0x7b0/0x7b0
   open_ctree+0x1486/0x1720
   btrfs_mount_root.cold+0x12/0xea
   ? __kmalloc_track_caller+0x12f/0x240
   legacy_get_tree+0x24/0x40
   vfs_get_tree+0x22/0xb0
   vfs_kern_mount.part.0+0x71/0xb0
   btrfs_mount+0x10d/0x380
   ? vfs_parse_fs_string+0x4d/0x90
   legacy_get_tree+0x24/0x40
   vfs_get_tree+0x22/0xb0
   path_mount+0x433/0xa10
   __x64_sys_mount+0xe3/0x120
   do_syscall_64+0x3d/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xae

We can get -EIO or any number of legitimate errors from
btrfs_search_slot(), panicing here is not the appropriate response.  The
error path for this code handles errors properly, simply return the
error.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: release path before starting transaction when cloning inline extent

[ Upstream commit 6416954ca75baed71640bf3828625bf165fb9b5e ]

When cloning an inline extent there are a few cases, such as when we have
an implicit hole at file offset 0, where we start a transaction while
holding a read lock on a leaf. Starting the transaction results in a call
to sb_start_intwrite(), which results in doing a read lock on a percpu
semaphore. Lockdep doesn't like this and complains about it:

  [46.580704] ======================================================
  [46.580752] WARNING: possible circular locking dependency detected
  [46.580799] 5.13.0-rc1 #28 Not tainted
  [46.580832] ------------------------------------------------------
  [46.580877] cloner/3835 is trying to acquire lock:
  [46.580918] c00000001301d638 (sb_internal#2){.+.+}-{0:0}, at: clone_copy_inline_extent+0xe4/0x5a0
  [46.581167]
  [46.581167] but task is already holding lock:
  [46.581217] c000000007fa2550 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x70/0x1d0
  [46.581293]
  [46.581293] which lock already depends on the new lock.
  [46.581293]
  [46.581351]
  [46.581351] the existing dependency chain (in reverse order) is:
  [46.581410]
  [46.581410] -> #1 (btrfs-tree-00){++++}-{3:3}:
  [46.581464]        down_read_nested+0x68/0x200
  [46.581536]        __btrfs_tree_read_lock+0x70/0x1d0
  [46.581577]        btrfs_read_lock_root_node+0x88/0x200
  [46.581623]        btrfs_search_slot+0x298/0xb70
  [46.581665]        btrfs_set_inode_index+0xfc/0x260
  [46.581708]        btrfs_new_inode+0x26c/0x950
  [46.581749]        btrfs_create+0xf4/0x2b0
  [46.581782]        lookup_open.isra.57+0x55c/0x6a0
  [46.581855]        path_openat+0x418/0xd20
  [46.581888]        do_filp_open+0x9c/0x130
  [46.581920]        do_sys_openat2+0x2ec/0x430
  [46.581961]        do_sys_open+0x90/0xc0
  [46.581993]        system_call_exception+0x3d4/0x410
  [46.582037]        system_call_common+0xec/0x278
  [46.582078]
  [46.582078] -> #0 (sb_internal#2){.+.+}-{0:0}:
  [46.582135]        __lock_acquire+0x1e90/0x2c50
  [46.582176]        lock_acquire+0x2b4/0x5b0
  [46.582263]        start_transaction+0x3cc/0x950
  [46.582308]        clone_copy_inline_extent+0xe4/0x5a0
  [46.582353]        btrfs_clone+0x5fc/0x880
  [46.582388]        btrfs_clone_files+0xd8/0x1c0
  [46.582434]        btrfs_remap_file_range+0x3d8/0x590
  [46.582481]        do_clone_file_range+0x10c/0x270
  [46.582558]        vfs_clone_file_range+0x1b0/0x310
  [46.582605]        ioctl_file_clone+0x90/0x130
  [46.582651]        do_vfs_ioctl+0x874/0x1ac0
  [46.582697]        sys_ioctl+0x6c/0x120
  [46.582733]        system_call_exception+0x3d4/0x410
  [46.582777]        system_call_common+0xec/0x278
  [46.582822]
  [46.582822] other info that might help us debug this:
  [46.582822]
  [46.582888]  Possible unsafe locking scenario:
  [46.582888]
  [46.582942]        CPU0                    CPU1
  [46.582984]        ----                    ----
  [46.583028]   lock(btrfs-tree-00);
  [46.583062]                                lock(sb_internal#2);
  [46.583119]                                lock(btrfs-tree-00);
  [46.583174]   lock(sb_internal#2);
  [46.583212]
  [46.583212]  *** DEADLOCK ***
  [46.583212]
  [46.583266] 6 locks held by cloner/3835:
  [46.583299]  #0: c00000001301d448 (sb_writers#12){.+.+}-{0:0}, at: ioctl_file_clone+0x90/0x130
  [46.583382]  #1: c00000000f6d3768 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}, at: lock_two_nondirectories+0x58/0xc0
  [46.583477]  #2: c00000000f6d72a8 (&sb->s_type->i_mutex_key#15/4){+.+.}-{3:3}, at: lock_two_nondirectories+0x9c/0xc0
  [46.583574]  #3: c00000000f6d7138 (&ei->i_mmap_lock){+.+.}-{3:3}, at: btrfs_remap_file_range+0xd0/0x590
  [46.583657]  #4: c00000000f6d35f8 (&ei->i_mmap_lock/1){+.+.}-{3:3}, at: btrfs_remap_file_range+0xe0/0x590
  [46.583743]  #5: c000000007fa2550 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x70/0x1d0
  [46.583828]
  [46.583828] stack backtrace:
  [46.583872] CPU: 1 PID: 3835 Comm: cloner Not tainted 5.13.0-rc1 #28
  [46.583931] Call Trace:
  [46.583955] [c0000000167c7200] [c000000000c1ee78] dump_stack+0xec/0x144 (unreliable)
  [46.584052] [c0000000167c7240] [c000000000274058] print_circular_bug.isra.32+0x3a8/0x400
  [46.584123] [c0000000167c72e0] [c0000000002741f4] check_noncircular+0x144/0x190
  [46.584191] [c0000000167c73b0] [c000000000278fc0] __lock_acquire+0x1e90/0x2c50
  [46.584259] [c0000000167c74f0] [c00000000027aa94] lock_acquire+0x2b4/0x5b0
  [46.584317] [c0000000167c75e0] [c000000000a0d6cc] start_transaction+0x3cc/0x950
  [46.584388] [c0000000167c7690] [c000000000af47a4] clone_copy_inline_extent+0xe4/0x5a0
  [46.584457] [c0000000167c77c0] [c000000000af525c] btrfs_clone+0x5fc/0x880
  [46.584514] [c0000000167c7990] [c000000000af5698] btrfs_clone_files+0xd8/0x1c0
  [46.584583] [c0000000167c7a00] [c000000000af5b58] btrfs_remap_file_range+0x3d8/0x590
  [46.584652] [c0000000167c7ae0] [c0000000005d81dc] do_clone_file_range+0x10c/0x270
  [46.584722] [c0000000167c7b40] [c0000000005d84f0] vfs_clone_file_range+0x1b0/0x310
  [46.584793] [c0000000167c7bb0] [c00000000058bf80] ioctl_file_clone+0x90/0x130
  [46.584861] [c0000000167c7c10] [c00000000058c894] do_vfs_ioctl+0x874/0x1ac0
  [46.584922] [c0000000167c7d10] [c00000000058db4c] sys_ioctl+0x6c/0x120
  [46.584978] [c0000000167c7d60] [c0000000000364a4] system_call_exception+0x3d4/0x410
  [46.585046] [c0000000167c7e10] [c00000000000d45c] system_call_common+0xec/0x278
  [46.585114] --- interrupt: c00 at 0x7ffff7e22990
  [46.585160] NIP:  00007ffff7e22990 LR: 00000001000010ec CTR: 0000000000000000
  [46.585224] REGS: c0000000167c7e80 TRAP: 0c00   Not tainted  (5.13.0-rc1)
  [46.585280] MSR:  800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE>  CR: 28000244  XER: 00000000
  [46.585374] IRQMASK: 0
  [46.585374] GPR00: 0000000000000036 00007fffffffdec0 00007ffff7f17100 0000000000000004
  [46.585374] GPR04: 000000008020940d 00007fffffffdf40 0000000000000000 0000000000000000
  [46.585374] GPR08: 0000000000000004 0000000000000000 0000000000000000 0000000000000000
  [46.585374] GPR12: 0000000000000000 00007ffff7ffa940 0000000000000000 0000000000000000
  [46.585374] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  [46.585374] GPR20: 0000000000000000 000000009123683e 00007fffffffdf40 0000000000000000
  [46.585374] GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000004
  [46.585374] GPR28: 0000000100030260 0000000100030280 0000000000000003 000000000000005f
  [46.585919] NIP [00007ffff7e22990] 0x7ffff7e22990
  [46.585964] LR [00000001000010ec] 0x1000010ec
  [46.586010] --- interrupt: c00

This should be a false positive, as both locks are acquired in read mode.
Nevertheless, we don't need to hold a leaf locked when we start the
transaction, so just release the leaf (path) before starting it.

Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/linux-btrfs/20210513214404.xks77p566fglzgum@riteshh-domain/
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm80xx: Fix drives missing during rmmod/insmod loop

[ Upstream commit d1acd81bd6eb685aa9fef25624fb36d297f6404e ]

When driver is loaded after rmmod some drives are not showing up during
discovery.

SATA drives are directly attached to the controller connected phys.  During
device discovery, the IDENTIFY command (qc timeout (cmd 0xec)) is timing out
during revalidation. This will trigger abort from host side and controller
successfully aborts the command and returns success. Post this successful
abort response ATA library decides to mark the disk as NODEV.

To overcome this, inside pm8001_scan_start() after phy_start() call, add get
start response and wait for few milliseconds to trigger next phy start.
This millisecond delay will give sufficient time for the controller state
machine to accept next phy start.

Link: https://lore.kernel.org/r/20210505120103.24497-1-ajish.koshy@microchip.com
Signed-off-by: Ajish Koshy <ajish.koshy@microchip.com>
Signed-off-by: Viswas G <viswas.g@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

openrisc: Define memory barrier mb

[ Upstream commit 8b549c18ae81dbc36fb11e4aa08b8378c599ca95 ]

This came up in the discussion of the requirements of qspinlock on an
architecture.  OpenRISC uses qspinlock, but it was noticed that the
memmory barrier was not defined.

Peter defined it in the mail thread writing:

    As near as I can tell this should do. The arch spec only lists
    this one instruction and the text makes it sound like a completion
    barrier.

This is correct so applying this patch.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
[shorne@gmail.com:Turned the mail into a patch]
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: BusLogic: Fix 64-bit system enumeration error for Buslogic

[ Upstream commit 56f396146af278135c0ff958c79b5ee1bd22453d ]

Commit 391e2f25601e ("[SCSI] BusLogic: Port driver to 64-bit")
introduced a serious issue for 64-bit systems.  With this commit,
64-bit kernel will enumerate 8*15 non-existing disks.  This is caused
by the broken CCB structure.  The change from u32 data to void *data
increased CCB length on 64-bit system, which introduced an extra 4
byte offset of the CDB.  This leads to incorrect response to INQUIRY
commands during enumeration.

Fix disk enumeration failure by reverting the portion of the commit
above which switched the data pointer from u32 to void.

Link: https://lore.kernel.org/r/C325637F-1166-4340-8F0F-3BCCD59D4D54@vmware.com
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Matt Wang <wwentao@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: ufs-mediatek: Fix power down spec violation

[ Upstream commit c625b80b9d00f3546722cd77527f9697c8c4c911 ]

As per spec, e.g. JESD220E chapter 7.2, while powering off the UFS device,
RST_N signal should be between VSS(Ground) and VCCQ/VCCQ2. The power down
sequence after fixing:

Power down:

 1. Assert RST_N low

 2. Turn-off VCC

 3. Turn-off VCCQ/VCCQ2

Link: https://lore.kernel.org/r/1620813706-25331-1-git-send-email-peter.wang@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: return whole extents in fiemap

[ Upstream commit 15c7745c9a0078edad1f7df5a6bb7b80bc8cca23 ]

  `xfs_io -c 'fiemap <off> <len>' <file>`

can give surprising results on btrfs that differ from xfs.

btrfs prints out extents trimmed to fit the user input. If the user's
fiemap request has an offset, then rather than returning each whole
extent which intersects that range, we also trim the start extent to not
have start < off.

Documentation in filesystems/fiemap.txt and the xfs_io man page suggests
that returning the whole extent is expected.

Some cases which all yield the same fiemap in xfs, but not btrfs:
  dd if=/dev/zero of=$f bs=4k count=1
  sudo xfs_io -c 'fiemap 0 1024' $f
    0: [0..7]: 26624..26631
  sudo xfs_io -c 'fiemap 2048 1024' $f
    0: [4..7]: 26628..26631
  sudo xfs_io -c 'fiemap 2048 4096' $f
    0: [4..7]: 26628..26631
  sudo xfs_io -c 'fiemap 3584 512' $f
    0: [7..7]: 26631..26631
  sudo xfs_io -c 'fiemap 4091 5' $f
    0: [7..6]: 26631..26630

I believe this is a consequence of the logic for merging contiguous
extents represented by separate extent items. That logic needs to track
the last offset as it loops through the extent items, which happens to
pick up the start offset on the first iteration, and trim off the
beginning of the full extent. To fix it, start `off` at 0 rather than
`start` so that we keep the iteration/merging intact without cutting off
the start of the extent.

after the fix, all the above commands give:

  0: [0..7]: 26624..26631

The merging logic is exercised by fstest generic/483, and I have written
a new fstest for checking we don't have backwards or zero-length fiemaps
for cases like those above.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmfmac: properly check for bus register errors

[ Upstream commit 419b4a142a7ece36cebcd434f8ce2af59ef94b85 ]

The brcmfmac driver ignores any errors on initialization with the
different busses by deferring the initialization to a workqueue and
ignoring all possible errors that might happen.  Fix up all of this by
only allowing the module to load if all bus registering worked properly.

Cc: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-70-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "brcmfmac: add a check for the status of usb_register"

[ Upstream commit 30a350947692f794796f563029d29764497f2887 ]

This reverts commit 42daad3343be4a4e1ee03e30a5f5cc731dadfef5.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original commit here did nothing to actually help if usb_register()
failed, so it gives a "false sense of security" when there is none.  The
correct solution is to correctly unwind from this error.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-69-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: liquidio: Add missing null pointer checks

[ Upstream commit dbc97bfd3918ed9268bfc174cae8a7d6b3d51aad ]

The functions send_rx_ctrl_cmd() in both liquidio/lio_main.c and
liquidio/lio_vf_main.c do not check if the call to
octeon_alloc_soft_command() fails and returns a null pointer. Both
functions also return void so errors are not propagated back to the
caller.

Fix these issues by updating both instances of send_rx_ctrl_cmd() to
return an integer rather than void, and have them return -ENOMEM if an
allocation failure occurs. Also update all callers of send_rx_ctrl_cmd()
so that they now check the return value.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Tom Seewald <tseewald@gmail.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-66-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "net: liquidio: fix a NULL pointer dereference"

[ Upstream commit 4fd798a5a89114c1892574c50f2aebd49bc5b4f5 ]

This reverts commit fe543b2f174f34a7a751aa08b334fe6b105c4569.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

While the original commit does keep the immediate "NULL dereference"
from happening, it does not properly propagate the error back to the
callers, AND it does not fix this same identical issue in the
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c for some reason.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: David S. Miller <davem@davemloft.net>
Link: https://lore.kernel.org/r/20210503115736.2104747-65-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: gspca: properly check for errors in po1030_probe()

[ Upstream commit dacb408ca6f0e34df22b40d8dd5fae7f8e777d84 ]

If m5602_write_sensor() or m5602_write_bridge() fail, do not continue to
initialize the device but return the error to the calling funtion.

Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-64-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "media: gspca: Check the return value of write_bridge for timeout"

[ Upstream commit 8e23e83c752b54e98102627a1cc09281ad71a299 ]

This reverts commit a21a0eb56b4e8fe4a330243af8030f890cde2283.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

Different error values should never be "OR" together and expect anything
sane to come out of the result.

Cc: Aditya Pakki <pakki001@umn.edu>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-63-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: gspca: mt9m111: Check write_bridge for timeout

[ Upstream commit e932f5b458eee63d013578ea128b9ff8ef5f5496 ]

If m5602_write_bridge times out, it will return a negative error value.
So properly check for this and handle the error correctly instead of
just ignoring it.

Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Alaa Emad <alaaemadhossney.ae@gmail.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-62-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "media: gspca: mt9m111: Check write_bridge for timeout"

[ Upstream commit d8c3be2fb2079d0cb4cd29d6aba58dbe54771e42 ]

This reverts commit 656025850074f5c1ba2e05be37bda57ba2b8d491.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

Different error values should never be "OR" together and expect anything
sane to come out of the result.

Cc: Aditya Pakki <pakki001@umn.edu>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-61-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dvb: Add check on sp8870_readreg return

[ Upstream commit c6d822c56e7fd29e6fa1b1bb91b98f6a1e942b3c ]

The function sp8870_readreg returns a negative value when i2c_transfer
fails so properly check for this and return the error if it happens.

Cc: Sean Young <sean@mess.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Alaa Emad <alaaemadhossney.ae@gmail.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-60-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "media: dvb: Add check on sp8870_readreg"

[ Upstream commit 47e4ff06fa7f5ba4860543a2913bbd0c164640aa ]

This reverts commit 467a37fba93f2b4fe3ab597ff6a517b22b566882.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

This commit is not properly checking for an error at all, so if a
read succeeds from this device, it will error out.

Cc: Aditya Pakki <pakki001@umn.edu>
Cc: Sean Young <sean@mess.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-59-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs43130: handle errors in cs43130_probe() properly

[ Upstream commit 2da441a6491d93eff8ffff523837fd621dc80389 ]

cs43130_probe() does not do any valid error checking of things it
initializes, OR what it does, it does not unwind properly if there are
errors.

Fix this up by moving the sysfs files to an attribute group so the
driver core will correctly add/remove them all at once and handle errors
with them, and correctly check for creating a new workqueue and
unwinding if that fails.

Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-58-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "ASoC: cs43130: fix a NULL pointer dereference"

[ Upstream commit fdda0dd2686ecd1f2e616c9e0366ea71b40c485d ]

This reverts commit a2be42f18d409213bb7e7a736e3ef6ba005115bb.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original patch here is not correct, sysfs files that were created
are not unwound.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-57-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libertas: register sysfs groups properly

[ Upstream commit 7e79b38fe9a403b065ac5915465f620a8fb3de84 ]

The libertas driver was trying to register sysfs groups "by hand" which
causes them to be created _after_ the device is initialized and
announced to userspace, which causes races and can prevent userspace
tools from seeing the sysfs files correctly.

Fix this up by using the built-in sysfs_groups pointers in struct
net_device which were created for this very reason, fixing the race
condition, and properly allowing for any error that might have occured
to be handled properly.

Cc: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-54-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>