Douglas Anderson [Fri, 16 Apr 2021 22:39:24 +0000 (15:39 -0700)]
drm/bridge: Fix the stop condition of drm_bridge_chain_pre_enable()
[ Upstream commit
bab5cca7e609952b069a550e39fe4893149fb658 ]
The drm_bridge_chain_pre_enable() is not the proper opposite of
drm_bridge_chain_post_disable(). It continues along the chain to
_before_ the starting bridge. Let's fix that.
Fixes:
05193dc38197 ("drm/bridge: Make the bridge chain a double-linked list")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.1.If62a003f76a2bc4ccc6c53565becc05d2aad4430@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
Robert Foss [Mon, 19 Apr 2021 09:01:24 +0000 (11:01 +0200)]
drm/bridge/sii8620: fix dependency on extcon
[ Upstream commit
08319adbdde15ef7cee1970336f63461254baa2a ]
The DRM_SIL_SII8620 kconfig has a weak `imply` dependency
on EXTCON, which causes issues when sii8620 is built
as a builtin and EXTCON is built as a module.
The symptoms are 'undefined reference' errors caused
by the symbols in EXTCON not being available
to the sii8620 driver.
Fixes:
688838442147 ("drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210419090124.153560-1-robert.foss@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sabrina Dubroca [Fri, 16 Apr 2021 09:27:59 +0000 (11:27 +0200)]
xfrm: xfrm_state_mtu should return at least 1280 for ipv6
[ Upstream commit
b515d2637276a3810d6595e10ab02c13bfd0b63a ]
Jianwen reported that IPv6 Interoperability tests are failing in an
IPsec case where one of the links between the IPsec peers has an MTU
of 1280. The peer generates a packet larger than this MTU, the router
replies with a "Packet too big" message indicating an MTU of 1280.
When the peer tries to send another large packet, xfrm_state_mtu
returns 1280 - ipsec_overhead, which causes ip6_setup_cork to fail
with EINVAL.
We can fix this by forcing xfrm_state_mtu to return IPV6_MIN_MTU when
IPv6 is used. After going through IPsec, the packet will then be
fragmented to obey the actual network's PMTU, just before leaving the
host.
Currently, TFC padding is capped to PMTU - overhead to avoid
fragementation: after padding and encapsulation, we still fit within
the PMTU. That behavior is preserved in this patch.
Fixes:
91657eafb64b ("xfrm: take net hdr len into account for esp payload size calculation")
Reported-by: Jianwen Ji <jiji@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Liu Shixin [Tue, 29 Jun 2021 02:42:33 +0000 (19:42 -0700)]
mm/page_alloc: fix counting of managed_pages
[ Upstream commit
f7ec104458e00d27a190348ac3a513f3df3699a4 ]
commit
f63661566fad ("mm/page_alloc.c: clear out zone->lowmem_reserve[] if
the zone is empty") clears out zone->lowmem_reserve[] if zone is empty.
But when zone is not empty and sysctl_lowmem_reserve_ratio[i] is set to
zero, zone_managed_pages(zone) is not counted in the managed_pages either.
This is inconsistent with the description of lowmem_reserve, so fix it.
Link: https://lkml.kernel.org/r/20210527125707.3760259-1-liushixin2@huawei.com
Fixes:
f63661566fad ("mm/page_alloc.c: clear out zone->lowmem_reserve[] if the zone is empty")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reported-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lorenzo Stoakes [Tue, 15 Dec 2020 03:11:22 +0000 (19:11 -0800)]
mm: page_alloc: refactor setup_per_zone_lowmem_reserve()
[ Upstream commit
470c61d70299b1826f56ff5fede10786798e3c14 ]
setup_per_zone_lowmem_reserve() iterates through each zone setting
zone->lowmem_reserve[j] = 0 (where j is the zone's index) then iterates
backwards through all preceding zones, setting
lower_zone->lowmem_reserve[j] = sum(managed pages of higher zones) /
lowmem_reserve_ratio[idx] for each (where idx is the lower zone's index).
If the lower zone has no managed pages or its ratio is 0 then all of its
lowmem_reserve[] entries are effectively zeroed.
As these arrays are only assigned here and all lowmem_reserve[] entries
for index < this zone's index are implicitly assumed to be 0 (as these are
specifically output in show_free_areas() and zoneinfo_show_print() for
example) there is no need to additionally zero index == this zone's index
too. This patch avoids zeroing unnecessarily.
Rather than iterating through zones and setting lowmem_reserve[j] for each
lower zone this patch reverse the process and populates each zone's
lowmem_reserve[] values in ascending order.
This clarifies what is going on especially in the case of zero managed
pages or ratio which is now explicitly shown to clear these values.
Link: https://lkml.kernel.org/r/20201129162758.115907-1-lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Waiman Long [Tue, 29 Jun 2021 02:37:34 +0000 (19:37 -0700)]
mm: memcg/slab: properly set up gfp flags for objcg pointer array
[ Upstream commit
41eb5df1cbc9b302fc263ad7c9f38cfc38b4df61 ]
Patch series "mm: memcg/slab: Fix objcg pointer array handling problem", v4.
Since the merging of the new slab memory controller in v5.9, the page
structure stores a pointer to objcg pointer array for slab pages. When
the slab has no used objects, it can be freed in free_slab() which will
call kfree() to free the objcg pointer array in
memcg_alloc_page_obj_cgroups(). If it happens that the objcg pointer
array is the last used object in its slab, that slab may then be freed
which may caused kfree() to be called again.
With the right workload, the slab cache may be set up in a way that allows
the recursive kfree() calling loop to nest deep enough to cause a kernel
stack overflow and panic the system. In fact, we have a reproducer that
can cause kernel stack overflow on a s390 system involving kmalloc-rcl-256
and kmalloc-rcl-128 slabs with the following kfree() loop recursively
called 74 times:
[ 285.520739] [<
000000000ec432fc>] kfree+0x4bc/0x560 [ 285.520740]
[<
000000000ec43466>] __free_slab+0xc6/0x228 [ 285.520741]
[<
000000000ec41fc2>] __slab_free+0x3c2/0x3e0 [ 285.520742]
[<
000000000ec432fc>] kfree+0x4bc/0x560 : While investigating this issue, I
also found an issue on the allocation side. If the objcg pointer array
happen to come from the same slab or a circular dependency linkage is
formed with multiple slabs, those affected slabs can never be freed again.
This patch series addresses these two issues by introducing a new set of
kmalloc-cg-<n> caches split from kmalloc-<n> caches. The new set will
only contain non-reclaimable and non-dma objects that are accounted in
memory cgroups whereas the old set are now for unaccounted objects only.
By making this split, all the objcg pointer arrays will come from the
kmalloc-<n> caches, but those caches will never hold any objcg pointer
array. As a result, deeply nested kfree() call and the unfreeable slab
problems are now gone.
This patch (of 4):
Since the merging of the new slab memory controller in v5.9, the page
structure may store a pointer to obj_cgroup pointer array for slab pages.
Currently, only the __GFP_ACCOUNT bit is masked off. However, the array
is not readily reclaimable and doesn't need to come from the DMA buffer.
So those GFP bits should be masked off as well.
Do the flag bit clearing at memcg_alloc_page_obj_cgroups() to make sure
that it is consistently applied no matter where it is called.
Link: https://lkml.kernel.org/r/20210505200610.13943-1-longman@redhat.com
Link: https://lkml.kernel.org/r/20210505200610.13943-2-longman@redhat.com
Fixes:
286e04b8ed7a ("mm: memcg/slab: allocate obj_cgroups for non-root slab pages")
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaohe Lin [Tue, 29 Jun 2021 02:36:57 +0000 (19:36 -0700)]
mm/shmem: fix shmem_swapin() race with swapoff
[ Upstream commit
2efa33fc7f6ec94a3a538c1a264273c889be2b36 ]
When I was investigating the swap code, I found the below possible race
window:
CPU 1 CPU 2
----- -----
shmem_swapin
swap_cluster_readahead
if (likely(si->flags & (SWP_BLKDEV | SWP_FS_OPS))) {
swapoff
..
si->swap_file = NULL;
..
struct inode *inode = si->swap_file->f_mapping->host;[oops!]
Close this race window by using get/put_swap_device() to guard against
concurrent swapoff.
Link: https://lkml.kernel.org/r/20210426123316.806267-5-linmiaohe@huawei.com
Fixes:
8fd2e0b505d1 ("mm: swap: check if swap backing device is congested or not")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaohe Lin [Tue, 29 Jun 2021 02:36:50 +0000 (19:36 -0700)]
swap: fix do_swap_page() race with swapoff
[ Upstream commit
2799e77529c2a25492a4395db93996e3dacd762d ]
When I was investigating the swap code, I found the below possible race
window:
CPU 1 CPU 2
----- -----
do_swap_page
if (data_race(si->flags & SWP_SYNCHRONOUS_IO)
swap_readpage
if (data_race(sis->flags & SWP_FS_OPS)) {
swapoff
..
p->swap_file = NULL;
..
struct file *swap_file = sis->swap_file;
struct address_space *mapping = swap_file->f_mapping;[oops!]
Note that for the pages that are swapped in through swap cache, this isn't
an issue. Because the page is locked, and the swap entry will be marked
with SWAP_HAS_CACHE, so swapoff() can not proceed until the page has been
unlocked.
Fix this race by using get/put_swap_device() to guard against concurrent
swapoff.
Link: https://lkml.kernel.org/r/20210426123316.806267-3-linmiaohe@huawei.com
Fixes:
0bcac06f27d7 ("mm,swap: skip swapcache for swapin of synchronous device")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anshuman Khandual [Tue, 29 Jun 2021 02:35:10 +0000 (19:35 -0700)]
mm/debug_vm_pgtable: ensure THP availability via has_transparent_hugepage()
[ Upstream commit
65ac1a60a57e2c55f2ac37f27095f6b012295e81 ]
On certain platforms, THP support could not just be validated via the
build option CONFIG_TRANSPARENT_HUGEPAGE. Instead
has_transparent_hugepage() also needs to be called upon to verify THP
runtime support. Otherwise the debug test will just run into unusable THP
helpers like in the case of a 4K hash config on powerpc platform [1].
This just moves all pfn_pmd() and pfn_pud() after THP runtime validation
with has_transparent_hugepage() which prevents the mentioned problem.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=213069
Link: https://lkml.kernel.org/r/1621397588-19211-1-git-send-email-anshuman.khandual@arm.com
Fixes:
787d563b8642 ("mm/debug_vm_pgtable: fix kernel crash by checking for THP support")
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anshuman Khandual [Wed, 24 Feb 2021 20:01:36 +0000 (12:01 -0800)]
mm/debug_vm_pgtable/basic: iterate over entire protection_map[]
[ Upstream commit
2e326c07bbe1eabeece4047ab5972ef34b15679b ]
Currently the basic tests just validate various page table transformations
after starting with vm_get_page_prot(VM_READ|VM_WRITE|VM_EXEC) protection.
Instead scan over the entire protection_map[] for better coverage. It
also makes sure that all these basic page table tranformations checks hold
true irrespective of the starting protection value for the page table
entry. There is also a slight change in the debug print format for basic
tests to capture the protection value it is being tested with. The
modified output looks something like
[pte_basic_tests ]: Validating PTE basic ()
[pte_basic_tests ]: Validating PTE basic (read)
[pte_basic_tests ]: Validating PTE basic (write)
[pte_basic_tests ]: Validating PTE basic (read|write)
[pte_basic_tests ]: Validating PTE basic (exec)
[pte_basic_tests ]: Validating PTE basic (read|exec)
[pte_basic_tests ]: Validating PTE basic (write|exec)
[pte_basic_tests ]: Validating PTE basic (read|write|exec)
[pte_basic_tests ]: Validating PTE basic (shared)
[pte_basic_tests ]: Validating PTE basic (read|shared)
[pte_basic_tests ]: Validating PTE basic (write|shared)
[pte_basic_tests ]: Validating PTE basic (read|write|shared)
[pte_basic_tests ]: Validating PTE basic (exec|shared)
[pte_basic_tests ]: Validating PTE basic (read|exec|shared)
[pte_basic_tests ]: Validating PTE basic (write|exec|shared)
[pte_basic_tests ]: Validating PTE basic (read|write|exec|shared)
This adds a missing argument 'struct mm_struct *' in pud_basic_tests()
test . This never got exposed before as PUD based THP is available only
on X86 platform where mm_pmd_folded(mm) call gets macro replaced without
requiring the mm_struct i.e __is_defined(__PAGETABLE_PMD_FOLDED).
Link: https://lkml.kernel.org/r/1611137241-26220-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Reviewed-by: Steven Price <steven.price@arm.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anshuman Khandual [Wed, 24 Feb 2021 20:01:32 +0000 (12:01 -0800)]
mm/debug_vm_pgtable/basic: add validation for dirtiness after write protect
[ Upstream commit
bb5c47ced46797409f4791d0380db3116d93134c ]
Patch series "mm/debug_vm_pgtable: Some minor updates", v3.
This series contains some cleanups and new test suggestions from Catalin
from an earlier discussion.
https://lore.kernel.org/linux-mm/
20201123142237.GF17833@gaia/
This patch (of 2):
This adds validation tests for dirtiness after write protect conversion
for each page table level. There are two new separate test types involved
here.
The first test ensures that a given page table entry does not become dirty
after pxx_wrprotect(). This is important for platforms like arm64 which
transfers and drops the hardware dirty bit (!PTE_RDONLY) to the software
dirty bit while making it an write protected one. This test ensures that
no fresh page table entry could be created with hardware dirty bit set.
The second test ensures that a given page table entry always preserve the
dirty information across pxx_wrprotect().
This adds two previously missing PUD level basic tests and while here
fixes pxx_wrprotect() related typos in the documentation file.
Link: https://lkml.kernel.org/r/1611137241-26220-1-git-send-email-anshuman.khandual@arm.com
Link: https://lkml.kernel.org/r/1611137241-26220-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jan Kara [Tue, 29 Jun 2021 02:35:04 +0000 (19:35 -0700)]
dax: fix ENOMEM handling in grab_mapping_entry()
[ Upstream commit
1a14e3779dd58c16b30e56558146e5cc850ba8b0 ]
grab_mapping_entry() has a bug in handling of ENOMEM condition. Suppose
we have a PMD entry at index i which we are downgrading to a PTE entry.
grab_mapping_entry() will set pmd_downgrade to true, lock the entry, clear
the entry in xarray, and decrement mapping->nrpages. The it will call:
entry = dax_make_entry(pfn_to_pfn_t(0), flags);
dax_lock_entry(xas, entry);
which inserts new PTE entry into xarray. However this may fail allocating
the new node. We handle this by:
if (xas_nomem(xas, mapping_gfp_mask(mapping) & ~__GFP_HIGHMEM))
goto retry;
however pmd_downgrade stays set to true even though 'entry' returned from
get_unlocked_entry() will be NULL now. And we will go again through the
downgrade branch. This is mostly harmless except that mapping->nrpages is
decremented again and we temporarily have an invalid entry stored in
xarray. Fix the problem by setting pmd_downgrade to false each time we
lookup the entry we work with so that it matches the entry we found.
Link: https://lkml.kernel.org/r/20210622160015.18004-1-jack@suse.cz
Fixes:
b15cd800682f ("dax: Convert page fault handlers to XArray")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Tue, 29 Jun 2021 02:34:01 +0000 (19:34 -0700)]
ocfs2: fix snprintf() checking
[ Upstream commit
54e948c60cc843b6e84dc44496edc91f51d2a28e ]
The snprintf() function returns the number of bytes which would have been
printed if the buffer was large enough. In other words it can return ">=
remain" but this code assumes it returns "== remain".
The run time impact of this bug is not very severe. The next iteration
through the loop would trigger a WARN() when we pass a negative limit to
snprintf(). We would then return success instead of -E2BIG.
The kernel implementation of snprintf() will never return negatives so
there is no need to check and I have deleted that dead code.
Link: https://lkml.kernel.org/r/20210511135350.GV1955@kadam
Fixes:
a860f6eb4c6a ("ocfs2: sysfile interfaces for online file check")
Fixes:
74ae4e104dfc ("ocfs2: Create stack glue sysfs files.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ming Lei [Fri, 25 Jun 2021 02:02:48 +0000 (10:02 +0800)]
blk-mq: update hctx->dispatch_busy in case of real scheduler
[ Upstream commit
cb9516be7708a2a18ec0a19fe3a225b5b3bc92c7 ]
Commit
6e6fcbc27e77 ("blk-mq: support batching dispatch in case of io")
starts to support io batching submission by using hctx->dispatch_busy.
However, blk_mq_update_dispatch_busy() isn't changed to update hctx->dispatch_busy
in that commit, so fix the issue by updating hctx->dispatch_busy in case
of real scheduler.
Reported-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Fixes:
6e6fcbc27e77 ("blk-mq: support batching dispatch in case of io")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210625020248.1630497-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafael J. Wysocki [Tue, 22 Jun 2021 19:11:39 +0000 (21:11 +0200)]
cpufreq: Make cpufreq_online() call driver->offline() on errors
[ Upstream commit
3b7180573c250eb6e2a7eec54ae91f27472332ea ]
In the CPU removal path the ->offline() callback provided by the
driver is always invoked before ->exit(), but in the cpufreq_online()
error path it is not, so ->exit() is expected to somehow know the
context in which it has been called and act accordingly.
That is less than straightforward, so make cpufreq_online() invoke
the driver's ->offline() callback, if present, on errors before
->exit() too.
This only potentially affects intel_pstate.
Fixes:
91a12e91dc39 ("cpufreq: Allow light-weight tear down and bring up of CPUs")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Wed, 23 Jun 2021 01:38:01 +0000 (18:38 -0700)]
ACPI: bgrt: Fix CFI violation
[ Upstream commit
f37ccf8fce155d08ae2a4fb3db677911ced0c21a ]
clang's Control Flow Integrity requires that every indirect call has a
valid target, which is based on the type of the function pointer. The
*_show() functions in this file are written as if they will be called
from dev_attr_show(); however, they will be called from
sysfs_kf_seq_show() because the files were created by
sysfs_create_group() and the sysfs ops are based on kobj_sysfs_ops
because of kobject_add_and_create(). Because the *_show() functions do
not match the type of the show() member in struct kobj_attribute, there
is a CFI violation.
$ cat /sys/firmware/acpi/bgrt/{status,type,version,{x,y}offset}}
1
0
1
522
307
$ dmesg | grep "CFI failure"
[ 267.761825] CFI failure (target: type_show.
d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
[ 267.762246] CFI failure (target: xoffset_show.
d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
[ 267.762584] CFI failure (target: status_show.
d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
[ 267.762973] CFI failure (target: yoffset_show.
d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
[ 267.763330] CFI failure (target: version_show.
d5e1ad21498a5fd14edbc5c320906598.cfi_jt+0x0/0x8):
Convert these functions to the type of the show() member in struct
kobj_attribute so that there is no more CFI violation. Because these
functions are all so similar, combine them into a macro.
Fixes:
d1ff4b1cdbab ("ACPI: Add support for exposing BGRT data")
Link: https://github.com/ClangBuiltLinux/linux/issues/1406
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dwaipayan Ray [Thu, 17 Dec 2020 12:45:36 +0000 (18:15 +0530)]
ACPI: Use DEVICE_ATTR_<RW|RO|WO> macros
[ Upstream commit
0f39ee8324e75c9d370e84a61323ceb194641a18 ]
Instead of open coding DEVICE_ATTR(), use the
DEVICE_ATTR_RW(), DEVICE_ATTR_RO() and DEVICE_ATTR_WO()
macros wherever possible.
This required a few functions to be renamed but the
functionality itself is unchanged.
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Yi [Sat, 19 Jun 2021 09:37:00 +0000 (17:37 +0800)]
blk-wbt: make sure throttle is enabled properly
[ Upstream commit
76a8040817b4b9c69b53f9b326987fa891b4082a ]
After commit
a79050434b45 ("blk-rq-qos: refactor out common elements of
blk-wbt"), if throttle was disabled by wbt_disable_default(), we could
not enable again, fix this by set enable_state back to
WBT_STATE_ON_DEFAULT.
Fixes:
a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210619093700.920393-3-yi.zhang@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Yi [Sat, 19 Jun 2021 09:36:59 +0000 (17:36 +0800)]
blk-wbt: introduce a new disable state to prevent false positive by rwb_enabled()
[ Upstream commit
1d0903d61e9645c6330b94247b96dd873dfc11c8 ]
Now that we disable wbt by simply zero out rwb->wb_normal in
wbt_disable_default() when switch elevator to bfq, but it's not safe
because it will become false positive if we change queue depth. If it
become false positive between wbt_wait() and wbt_track() when submit
write request, it will lead to drop rqw->inflight to -1 in wbt_done(),
which will end up trigger IO hung. Fix this issue by introduce a new
state which mean the wbt was disabled.
Fixes:
a79050434b45 ("blk-rq-qos: refactor out common elements of blk-wbt")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210619093700.920393-2-yi.zhang@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiaofei Tan [Fri, 11 Jun 2021 12:37:07 +0000 (20:37 +0800)]
ACPI: APEI: fix synchronous external aborts in user-mode
[ Upstream commit
ccb5ecdc2ddeaff744ee075b54cdff8a689e8fa7 ]
Before commit
8fcc4ae6faf8 ("arm64: acpi: Make apei_claim_sea()
synchronise with APEI's irq work"), do_sea() would unconditionally
signal the affected task from the arch code. Since that change,
the GHES driver sends the signals.
This exposes a problem as errors the GHES driver doesn't understand
or doesn't handle effectively are silently ignored. It will cause
the errors get taken again, and circulate endlessly. User-space task
get stuck in this loop.
Existing firmware on Kunpeng9xx systems reports cache errors with the
'ARM Processor Error' CPER records.
Do memory failure handling for ARM Processor Error Section just like
for Memory Error Section.
Fixes:
8fcc4ae6faf8 ("arm64: acpi: Make apei_claim_sea() synchronise with APEI's irq work")
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Matti Vaittinen [Tue, 8 Jun 2021 10:10:31 +0000 (13:10 +0300)]
extcon: extcon-max8997: Fix IRQ freeing at error path
[ Upstream commit
610bdc04830a864115e6928fc944f1171dfff6f3 ]
If reading MAX8997_MUIC_REG_STATUS1 fails at probe the driver exits
without freeing the requested IRQs.
Free the IRQs prior returning if reading the status fails.
Fixes:
3e34c8198960 ("extcon: max8997: Avoid forcing UART path on drive probe")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/27ee4a48ee775c3f8c9d90459c18b6f2b15edc76.1623146580.git.matti.vaittinen@fi.rohmeurope.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Thu, 15 Apr 2021 08:55:06 +0000 (11:55 +0300)]
clocksource/drivers/timer-ti-dm: Save and restore timer TIOCP_CFG
[ Upstream commit
9517c577f9f722270584cfb1a7b4e1354e408658 ]
As we are using cpu_pm to save and restore context, we must also save and
restore the timer sysconfig register TIOCP_CFG. This is needed because
we are not calling PM runtime functions at all with cpu_pm.
Fixes:
b34677b0999a ("clocksource/drivers/timer-ti-dm: Implement cpu_pm notifier for context save and restore")
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Adam Ford <aford173@gmail.com>
Cc: Andreas Kemnade <andreas@kemnade.info>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210415085506.56828-1-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christoph Hellwig [Tue, 8 Jun 2021 16:13:27 +0000 (18:13 +0200)]
mark pstore-blk as broken
[ Upstream commit
d07f3b081ee632268786601f55e1334d1f68b997 ]
pstore-blk just pokes directly into the pagecache for the block
device without going through the file operations for that by faking
up it's own file operations that do not match the block device ones.
As this breaks the control of the block layer of it's page cache,
and even now just works by accident only the best thing is to just
disable this driver.
Fixes:
17639f67c1d6 ("pstore/blk: Introduce backend for block devices")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210608161327.1537919-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Wilczyński [Thu, 3 Jun 2021 17:12:01 +0000 (17:12 +0000)]
ACPI: sysfs: Fix a buffer overrun problem with description_show()
[ Upstream commit
888be6067b97132c3992866bbcf647572253ab3f ]
Currently, a device description can be obtained using ACPI, if the _STR
method exists for a particular device, and then exposed to the userspace
via a sysfs object as a string value.
If the _STR method is available for a given device then the data
(usually a Unicode string) is read and stored in a buffer (of the
ACPI_TYPE_BUFFER type) with a pointer to said buffer cached in the
struct acpi_device_pnp for later access.
The description_show() function is responsible for exposing the device
description to the userspace via a corresponding sysfs object and
internally calls the utf16s_to_utf8s() function with a pointer to the
buffer that contains the Unicode string so that it can be converted from
UTF16 encoding to UTF8 and thus allowing for the value to be safely
stored and later displayed.
When invoking the utf16s_to_utf8s() function, the description_show()
function also sets a limit of the data that can be saved into a provided
buffer as a result of the character conversion to be a total of
PAGE_SIZE, and upon completion, the utf16s_to_utf8s() function returns
an integer value denoting the number of bytes that have been written
into the provided buffer.
Following the execution of the utf16s_to_utf8s() a newline character
will be added at the end of the resulting buffer so that when the value
is read in the userspace through the sysfs object then it would include
newline making it more accessible when working with the sysfs file
system in the shell, etc. Normally, this wouldn't be a problem, but if
the function utf16s_to_utf8s() happens to return the number of bytes
written to be precisely PAGE_SIZE, then we would overrun the buffer and
write the newline character outside the allotted space which can have
undefined consequences or result in a failure.
To fix this buffer overrun, ensure that there always is enough space
left for the newline character to be safely appended.
Fixes:
d1efe3c324ea ("ACPI: Add new sysfs interface to export device description")
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mario Limonciello [Fri, 28 May 2021 16:02:34 +0000 (11:02 -0500)]
nvme-pci: look for StorageD3Enable on companion ACPI device instead
[ Upstream commit
e21e0243e7b0f1c2a21d21f4d115f7b37175772a ]
The documentation around the StorageD3Enable property hints that it
should be made on the PCI device. This is where newer AMD systems set
the property and it's required for S0i3 support.
So rather than look for nodes of the root port only present on Intel
systems, switch to the companion ACPI device for all systems.
David Box from Intel indicated this should work on Intel as well.
Link: https://lore.kernel.org/linux-nvme/YK6gmAWqaRmvpJXb@google.com/T/#m900552229fa455867ee29c33b854845fce80ba70
Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro
Fixes:
df4f9bc4fb9c ("nvme-pci: add support for ACPI StorageD3Enable property")
Suggested-by: Liang Prike <Prike.Liang@amd.com>
Acked-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ming Lei [Tue, 11 May 2021 15:22:33 +0000 (23:22 +0800)]
block: avoid double io accounting for flush request
[ Upstream commit
84da7acc3ba53af26f15c4b0ada446127b7a7836 ]
For flush request, rq->end_io() may be called two times, one is from
timeout handling(blk_mq_check_expired()), another is from normal
completion(__blk_mq_end_request()).
Move blk_account_io_flush() after flush_rq->ref drops to zero, so
io accounting can be done just once for flush request.
Fixes:
b68663186577 ("block: add iostat counters for flush requests")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210511152236.763464-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafael J. Wysocki [Fri, 14 May 2021 19:08:51 +0000 (21:08 +0200)]
ACPI: PM / fan: Put fan device IDs into separate header file
[ Upstream commit
b9370dceabb7841c5e65ce4ee4405b9db5231fc4 ]
The ACPI fan device IDs are shared between the fan driver and the
device power management code. The former is modular, so it needs
to include the table of device IDs for module autoloading and the
latter needs that list to avoid attaching the generic ACPI PM domain
to fan devices (which doesn't make sense) possibly before the fan
driver module is loaded.
Unfortunately, that requires the list of fan device IDs to be
updated in two places which is prone to mistakes, so put it into
a symbol definition in a separate header file so there is only one
copy of it in case it needs to be updated again in the future.
Fixes:
b9ea0bae260f ("ACPI: PM: Avoid attaching ACPI PM domain to certain devices")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
YueHaibing [Fri, 14 May 2021 06:48:43 +0000 (14:48 +0800)]
PM / devfreq: Add missing error code in devfreq_add_device()
[ Upstream commit
18b380ed61f892ed06838d1f1a5124d966292ed3 ]
Set err code in the error path before jumping to the end of the function.
Fixes:
4dc3bab8687f ("PM / devfreq: Add support delayed timer for polling mode")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Philipp Zabel [Mon, 22 Mar 2021 14:44:08 +0000 (15:44 +0100)]
media: video-mux: Skip dangling endpoints
[ Upstream commit
95778c2d0979618e3349b1d2324ec282a5a6adbf ]
i.MX6 device tree include files contain dangling endpoints for the
board device tree writers' convenience. These are still included in
many existing device trees.
Treat dangling endpoints as non-existent to support them.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes:
612b385efb1e ("media: video-mux: Create media links in bound notifier")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ezequiel Garcia [Mon, 18 Jan 2021 01:52:45 +0000 (02:52 +0100)]
media: v4l2-async: Clean v4l2_async_notifier_add_fwnode_remote_subdev
[ Upstream commit
c1cf3d896d124e3e00794f9bfbde49f0fc279e3f ]
Change v4l2_async_notifier_add_fwnode_remote_subdev semantics
so it allocates the struct v4l2_async_subdev pointer.
This makes the API consistent: the v4l2-async subdevice addition
functions have now a unified usage model. This model is simpler,
as it makes v4l2-async responsible for the allocation and release
of the subdevice descriptor, and no longer something the driver
has to worry about.
On the user side, the change makes the API simpler for the drivers
to use and less error-prone.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhaoyang Huang [Fri, 11 Jun 2021 00:29:34 +0000 (08:29 +0800)]
psi: Fix race between psi_trigger_create/destroy
[ Upstream commit
8f91efd870ea5d8bc10b0fcc9740db51cd4c0c83 ]
Race detected between psi_trigger_destroy/create as shown below, which
cause panic by accessing invalid psi_system->poll_wait->wait_queue_entry
and psi_system->poll_timer->entry->next. Under this modification, the
race window is removed by initialising poll_wait and poll_timer in
group_init which are executed only once at beginning.
psi_trigger_destroy() psi_trigger_create()
mutex_lock(trigger_lock);
rcu_assign_pointer(poll_task, NULL);
mutex_unlock(trigger_lock);
mutex_lock(trigger_lock);
if (!rcu_access_pointer(group->poll_task)) {
timer_setup(poll_timer, poll_timer_fn, 0);
rcu_assign_pointer(poll_task, task);
}
mutex_unlock(trigger_lock);
synchronize_rcu();
del_timer_sync(poll_timer); <-- poll_timer has been reinitialized by
psi_trigger_create()
So, trigger_lock/RCU correctly protects destruction of
group->poll_task but misses this race affecting poll_timer and
poll_wait.
Fixes:
461daba06bdc ("psi: eliminate kthread_worker from psi trigger scheduling mechanism")
Co-developed-by: ziwei.dai <ziwei.dai@unisoc.com>
Signed-off-by: ziwei.dai <ziwei.dai@unisoc.com>
Co-developed-by: ke.wang <ke.wang@unisoc.com>
Signed-off-by: ke.wang <ke.wang@unisoc.com>
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/1623371374-15664-1-git-send-email-huangzhaoyang@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Herbert Xu [Thu, 17 Jun 2021 07:57:12 +0000 (15:57 +0800)]
crypto: nx - Fix RCU warning in nx842_OF_upd_status
[ Upstream commit
2a96726bd0ccde4f12b9b9a9f61f7b1ac5af7e10 ]
The function nx842_OF_upd_status triggers a sparse RCU warning when
it directly dereferences the RCU-protected devdata. This appears
to be an accident as there was another variable of the same name
that was passed in from the caller.
After it was removed (because the main purpose of using it, to
update the status member was itself removed) the global variable
unintenionally stood in as its replacement.
This patch restores the devdata parameter.
Fixes:
90fd73f912f0 ("crypto: nx - remove pSeries NX 'status' field")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mirko Vogt [Mon, 14 Jun 2021 14:45:07 +0000 (16:45 +0200)]
spi: spi-sun6i: Fix chipselect/clock bug
[ Upstream commit
0d7993b234c9fad8cb6bec6adfaa74694ba85ecb ]
The current sun6i SPI implementation initializes the transfer too early,
resulting in SCK going high before the transfer. When using an additional
(gpio) chipselect with sun6i, the chipselect is asserted at a time when
clock is high, making the SPI transfer fail.
This is due to SUN6I_GBL_CTL_BUS_ENABLE being written into
SUN6I_GBL_CTL_REG at an early stage. Moving that to the transfer
function, hence, right before the transfer starts, mitigates that
problem.
Fixes:
3558fe900e8af (spi: sunxi: Add Allwinner A31 SPI controller driver)
Signed-off-by: Mirko Vogt <mirko-dev|linux@nanl.de>
Signed-off-by: Ralf Schlatterbeck <rsc@runtux.com>
Link: https://lore.kernel.org/r/20210614144507.y3udezjfbko7eavv@runtux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Thu, 17 Jun 2021 18:57:19 +0000 (20:57 +0200)]
lockdep/selftests: Fix selftests vs PROVE_RAW_LOCK_NESTING
[ Upstream commit
c0c2c0dad6a06e0c05e9a52d65f932bd54364c97 ]
When PROVE_RAW_LOCK_NESTING=y many of the selftests FAILED because
HARDIRQ context is out-of-bounds for spinlocks. Instead make the
default hardware context the threaded hardirq context, which preserves
the old locking rules.
The wait-type specific locking selftests will have a non-threaded
HARDIRQ variant.
Fixes:
de8f5e4f2dc1 ("lockdep: Introduce wait-type checks")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210617190313.322096283@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Thu, 17 Jun 2021 18:57:18 +0000 (20:57 +0200)]
lockdep: Fix wait-type for empty stack
[ Upstream commit
f8b298cc39f0619544c607eaef09fd0b2afd10f3 ]
Even the very first lock can violate the wait-context check, consider
the various IRQ contexts.
Fixes:
de8f5e4f2dc1 ("lockdep: Introduce wait-type checks")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210617190313.256987481@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qais Yousef [Thu, 17 Jun 2021 16:51:55 +0000 (17:51 +0100)]
sched/uclamp: Fix uclamp_tg_restrict()
[ Upstream commit
0213b7083e81f4acd69db32cb72eb4e5f220329a ]
Now cpu.uclamp.min acts as a protection, we need to make sure that the
uclamp request of the task is within the allowed range of the cgroup,
that is it is clamp()'ed correctly by tg->uclamp[UCLAMP_MIN] and
tg->uclamp[UCLAMP_MAX].
As reported by Xuewen [1] we can have some corner cases where there's
inversion between uclamp requested by task (p) and the uclamp values of
the taskgroup it's attached to (tg). Following table demonstrates
2 corner cases:
| p | tg | effective
-----------+-----+------+-----------
CASE 1
-----------+-----+------+-----------
uclamp_min | 60% | 0% | 60%
-----------+-----+------+-----------
uclamp_max | 80% | 50% | 50%
-----------+-----+------+-----------
CASE 2
-----------+-----+------+-----------
uclamp_min | 0% | 30% | 30%
-----------+-----+------+-----------
uclamp_max | 20% | 50% | 20%
-----------+-----+------+-----------
With this fix we get:
| p | tg | effective
-----------+-----+------+-----------
CASE 1
-----------+-----+------+-----------
uclamp_min | 60% | 0% | 50%
-----------+-----+------+-----------
uclamp_max | 80% | 50% | 50%
-----------+-----+------+-----------
CASE 2
-----------+-----+------+-----------
uclamp_min | 0% | 30% | 30%
-----------+-----+------+-----------
uclamp_max | 20% | 50% | 30%
-----------+-----+------+-----------
Additionally uclamp_update_active_tasks() must now unconditionally
update both UCLAMP_MIN/MAX because changing the tg's UCLAMP_MAX for
instance could have an impact on the effective UCLAMP_MIN of the tasks.
| p | tg | effective
-----------+-----+------+-----------
old
-----------+-----+------+-----------
uclamp_min | 60% | 0% | 50%
-----------+-----+------+-----------
uclamp_max | 80% | 50% | 50%
-----------+-----+------+-----------
*new*
-----------+-----+------+-----------
uclamp_min | 60% | 0% | *60%*
-----------+-----+------+-----------
uclamp_max | 80% |*70%* | *70%*
-----------+-----+------+-----------
[1] https://lore.kernel.org/lkml/CAB8ipk_a6VFNjiEnHRHkUMBKbA+qzPQvhtNjJ_YNzQhqV_o8Zw@mail.gmail.com/
Fixes:
0c18f2ecfcc2 ("sched/uclamp: Fix wrong implementation of cpu.uclamp.min")
Reported-by: Xuewen Yan <xuewen.yan94@gmail.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210617165155.3774110-1-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vincent Donnefort [Mon, 21 Jun 2021 10:37:52 +0000 (11:37 +0100)]
sched/rt: Fix Deadline utilization tracking during policy change
[ Upstream commit
d7d607096ae6d378b4e92d49946d22739c047d4c ]
DL keeps track of the utilization on a per-rq basis with the structure
avg_dl. This utilization is updated during task_tick_dl(),
put_prev_task_dl() and set_next_task_dl(). However, when the current
running task changes its policy, set_next_task_dl() which would usually
take care of updating the utilization when the rq starts running DL
tasks, will not see a such change, leaving the avg_dl structure outdated.
When that very same task will be dequeued later, put_prev_task_dl() will
then update the utilization, based on a wrong last_update_time, leading to
a huge spike in the DL utilization signal.
The signal would eventually recover from this issue after few ms. Even
if no DL tasks are run, avg_dl is also updated in
__update_blocked_others(). But as the CPU capacity depends partly on the
avg_dl, this issue has nonetheless a significant impact on the scheduler.
Fix this issue by ensuring a load update when a running task changes
its policy to DL.
Fixes: 3727e0e ("sched/dl: Add dl_rq utilization tracking")
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/1624271872-211872-3-git-send-email-vincent.donnefort@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vincent Donnefort [Mon, 21 Jun 2021 10:37:51 +0000 (11:37 +0100)]
sched/rt: Fix RT utilization tracking during policy change
[ Upstream commit
fecfcbc288e9f4923f40fd23ca78a6acdc7fdf6c ]
RT keeps track of the utilization on a per-rq basis with the structure
avg_rt. This utilization is updated during task_tick_rt(),
put_prev_task_rt() and set_next_task_rt(). However, when the current
running task changes its policy, set_next_task_rt() which would usually
take care of updating the utilization when the rq starts running RT tasks,
will not see a such change, leaving the avg_rt structure outdated. When
that very same task will be dequeued later, put_prev_task_rt() will then
update the utilization, based on a wrong last_update_time, leading to a
huge spike in the RT utilization signal.
The signal would eventually recover from this issue after few ms. Even if
no RT tasks are run, avg_rt is also updated in __update_blocked_others().
But as the CPU capacity depends partly on the avg_rt, this issue has
nonetheless a significant impact on the scheduler.
Fix this issue by ensuring a load update when a running task changes
its policy to RT.
Fixes:
371bf427 ("sched/rt: Add rt_rq utilization tracking")
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/1624271872-211872-2-git-send-email-vincent.donnefort@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joerg Roedel [Fri, 18 Jun 2021 11:54:09 +0000 (13:54 +0200)]
x86/sev: Split up runtime #VC handler for correct state tracking
[ Upstream commit
be1a5408868af341f61f93c191b5e346ee88c82a ]
Split up the #VC handler code into a from-user and a from-kernel part.
This allows clean and correct state tracking, as the #VC handler needs
to enter NMI-state when raised from kernel mode and plain IRQ state when
raised from user-mode.
Fixes:
62441a1fb532 ("x86/sev-es: Correctly track IRQ states in runtime #VC handler")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210618115409.22735-3-joro@8bytes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joerg Roedel [Fri, 18 Jun 2021 11:54:08 +0000 (13:54 +0200)]
x86/sev: Make sure IRQs are disabled while GHCB is active
[ Upstream commit
d187f217335dba2b49fc9002aab2004e04acddee ]
The #VC handler only cares about IRQs being disabled while the GHCB is
active, as it must not be interrupted by something which could cause
another #VC while it holds the GHCB (NMI is the exception for which the
backup GHCB exits).
Make sure nothing interrupts the code path while the GHCB is active
by making sure that callers of __sev_{get,put}_ghcb() have disabled
interrupts upfront.
[ bp: Massage commit message. ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210618115409.22735-2-joro@8bytes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Sterba [Tue, 7 Jul 2020 16:38:05 +0000 (18:38 +0200)]
btrfs: clear log tree recovering status if starting transaction fails
[ Upstream commit
1aeb6b563aea18cd55c73cf666d1d3245a00f08c ]
When a log recovery is in progress, lots of operations have to take that
into account, so we keep this status per tree during the operation. Long
time ago error handling revamp patch
79787eaab461 ("btrfs: replace many
BUG_ONs with proper error handling") removed clearing of the status in
an error branch. Add it back as was intended in
e02119d5a7b4 ("Btrfs:
Add a write ahead tree log to optimize synchronous operations").
There are probably no visible effects, log replay is done only during
mount and if it fails all structures are cleared so the stale status
won't be kept.
Fixes:
79787eaab461 ("btrfs: replace many BUG_ONs with proper error handling")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Axel Lin [Sun, 20 Jun 2021 13:27:15 +0000 (21:27 +0800)]
regulator: hi655x: Fix pass wrong pointer to config.driver_data
[ Upstream commit
61eb1b24f9e4f4e0725aa5f8164a932c933f3339 ]
Current code sets config.driver_data to a zero initialized regulator
which is obviously wrong. Fix it.
Fixes:
4618119b9be5 ("regulator: hi655x: enable regulator for hi655x PMIC")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210620132715.60215-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexandru Elisei [Fri, 18 Jun 2021 10:51:39 +0000 (11:51 +0100)]
KVM: arm64: Don't zero the cycle count register when PMCR_EL0.P is set
[ Upstream commit
2a71fabf6a1bc9162a84e18d6ab991230ca4d588 ]
According to ARM DDI 0487G.a, page D13-3895, setting the PMCR_EL0.P bit to
1 has the following effect:
"Reset all event counters accessible in the current Exception level, not
including PMCCNTR_EL0, to zero."
Similar behaviour is described for AArch32 on page G8-7022. Make it so.
Fixes:
c01d6a18023b ("KVM: arm64: pmu: Only handle supported event counters")
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210618105139.83795-1-alexandru.elisei@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tuan Phan [Thu, 17 Jun 2021 16:08:49 +0000 (09:08 -0700)]
perf/arm-cmn: Fix invalid pointer when access dtc object sharing the same IRQ number
[ Upstream commit
4e16f283edc289820e9b2d6f617ed8e514ee8396 ]
When multiple dtcs share the same IRQ number, the irq_friend which
used to refer to dtc object gets calculated incorrect which leads
to invalid pointer.
Fixes:
0ba64770a2f2 ("perf: Add Arm CMN-600 PMU driver")
Signed-off-by: Tuan Phan <tuanphan@os.amperecomputing.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1623946129-3290-1-git-send-email-tuanphan@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kai Huang [Tue, 15 Jun 2021 00:57:09 +0000 (12:57 +1200)]
KVM: x86/mmu: Fix return value in tdp_mmu_map_handle_target_level()
[ Upstream commit
57a3e96d6d17ae5ac9861ef34af024a627f1c3bb ]
Currently tdp_mmu_map_handle_target_level() returns 0, which is
RET_PF_RETRY, when page fault is actually fixed. This makes
kvm_tdp_mmu_map() also return RET_PF_RETRY in this case, instead of
RET_PF_FIXED. Fix by initializing ret to RET_PF_FIXED.
Note that kvm_mmu_page_fault() resumes guest on both RET_PF_RETRY and
RET_PF_FIXED, which means in practice returning the two won't make
difference, so this fix alone won't be necessary for stable tree.
Fixes:
bb18842e2111 ("kvm: x86/mmu: Add TDP MMU PF handler")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-Id: <
f9e8956223a586cd28c090879a8ff40f5eb6d609.
1623717884.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Christopherson [Wed, 9 Jun 2021 23:42:23 +0000 (16:42 -0700)]
KVM: nVMX: Don't clobber nested MMU's A/D status on EPTP switch
[ Upstream commit
272b0a998d084e7667284bdd2d0c675c6a2d11de ]
Drop bogus logic that incorrectly clobbers the accessed/dirty enabling
status of the nested MMU on an EPTP switch. When nested EPT is enabled,
walk_mmu points at L2's _legacy_ page tables, not L1's EPT for L2.
This is likely a benign bug, as mmu->ept_ad is never consumed (since the
MMU is not a nested EPT MMU), and stuffing mmu_role.base.ad_disabled will
never propagate into future shadow pages since the nested MMU isn't used
to map anything, just to walk L2's page tables.
Note, KVM also does a full MMU reload, i.e. the guest_mmu will be
recreated using the new EPTP, and thus any change in A/D enabling will be
properly recognized in the relevant MMU.
Fixes:
41ab93727467 ("KVM: nVMX: Emulate EPTP switching for the L1 hypervisor")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210609234235.1244004-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Christopherson [Wed, 9 Jun 2021 23:42:22 +0000 (16:42 -0700)]
KVM: nVMX: Ensure 64-bit shift when checking VMFUNC bitmap
[ Upstream commit
0e75225dfa4c5d5d51291f54a3d2d5895bad38da ]
Use BIT_ULL() instead of an open-coded shift to check whether or not a
function is enabled in L1's VMFUNC bitmap. This is a benign bug as KVM
supports only bit 0, and will fail VM-Enter if any other bits are set,
i.e. bits 63:32 are guaranteed to be zero.
Note, "function" is bounded by hardware as VMFUNC will #UD before taking
a VM-Exit if the function is greater than 63.
Before:
if ((vmcs12->vm_function_control & (1 << function)) == 0)
0x000000000001a916 <+118>: mov $0x1,%eax
0x000000000001a91b <+123>: shl %cl,%eax
0x000000000001a91d <+125>: cltq
0x000000000001a91f <+127>: and 0x128(%rbx),%rax
After:
if (!(vmcs12->vm_function_control & BIT_ULL(function & 63)))
0x000000000001a955 <+117>: mov 0x128(%rbx),%rdx
0x000000000001a95c <+124>: bt %rax,%rdx
Fixes:
27c42a1bb867 ("KVM: nVMX: Enable VMFUNC for the L1 hypervisor")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210609234235.1244004-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Christopherson [Wed, 9 Jun 2021 23:42:21 +0000 (16:42 -0700)]
KVM: nVMX: Sync all PGDs on nested transition with shadow paging
[ Upstream commit
07ffaf343e34b555c9e7ea39a9c81c439a706f13 ]
Trigger a full TLB flush on behalf of the guest on nested VM-Enter and
VM-Exit when VPID is disabled for L2. kvm_mmu_new_pgd() syncs only the
current PGD, which can theoretically leave stale, unsync'd entries in a
previous guest PGD, which could be consumed if L2 is allowed to load CR3
with PCID_NOFLUSH=1.
Rename KVM_REQ_HV_TLB_FLUSH to KVM_REQ_TLB_FLUSH_GUEST so that it can
be utilized for its obvious purpose of emulating a guest TLB flush.
Note, there is no change the actual TLB flush executed by KVM, even
though the fast PGD switch uses KVM_REQ_TLB_FLUSH_CURRENT. When VPID is
disabled for L2, vpid02 is guaranteed to be '0', and thus
nested_get_vpid02() will return the VPID that is shared by L1 and L2.
Generate the request outside of kvm_mmu_new_pgd(), as getting the common
helper to correctly identify which requested is needed is quite painful.
E.g. using KVM_REQ_TLB_FLUSH_GUEST when nested EPT is in play is wrong as
a TLB flush from the L1 kernel's perspective does not invalidate EPT
mappings. And, by using KVM_REQ_TLB_FLUSH_GUEST, nVMX can do future
simplification by moving the logic into nested_vmx_transition_tlb_flush().
Fixes:
41fab65e7c44 ("KVM: nVMX: Skip MMU sync on nested VMX transition when possible")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <
20210609234235.1244004-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guenter Roeck [Wed, 26 May 2021 15:40:16 +0000 (08:40 -0700)]
hwmon: (max31790) Fix fan speed reporting for fan7..12
[ Upstream commit
cbbf244f0515af3472084f22b6213121b4a63835 ]
Fans 7..12 do not have their own set of configuration registers.
So far the code ignored that and read beyond the end of the configuration
register range to get the tachometer period. This resulted in more or less
random fan speed values for those fans.
The datasheet is quite vague when it comes to defining the tachometer
period for fans 7..12. Experiments confirm that the period is the same
for both fans associated with a given set of configuration registers.
Fixes:
54187ff9d766 ("hwmon: (max31790) Convert to use new hwmon registration API")
Fixes:
195a4b4298a7 ("hwmon: Driver for Maxim MAX31790")
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Cc: Václav Kubernát <kubernat@cesnet.cz>
Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210526154022.3223012-2-linux@roeck-us.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guenter Roeck [Sat, 8 May 2021 16:50:25 +0000 (09:50 -0700)]
hwmon: (max31722) Remove non-standard ACPI device IDs
[ Upstream commit
97387c2f06bcfd79d04a848d35517b32ee6dca7c ]
Valid Maxim Integrated ACPI device IDs would start with MXIM,
not with MAX1. On top of that, ACPI device IDs reflecting chip names
are almost always invalid.
Remove the invalid ACPI IDs.
Fixes:
04e1e70afec6 ("hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensors")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guenter Roeck [Sat, 8 May 2021 16:44:50 +0000 (09:44 -0700)]
hwmon: (lm70) Revert "hwmon: (lm70) Add support for ACPI"
[ Upstream commit
ac61c8aae446b9c0fe18981fe721d4a43e283ad6 ]
This reverts commit
b58bd4c6dfe709646ed9efcbba2a70643f9bc873.
None of the ACPI IDs introduced with the reverted patch is a valid ACPI
device ID. Any ACPI users of this driver are advised to use PRP0001 and
a devicetree-compatible device identification.
Fixes:
b58bd4c6dfe7 ("hwmon: (lm70) Add support for ACPI")
Cc: Andrej Picej <andpicej@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stephen Boyd [Sat, 23 Jan 2021 03:44:27 +0000 (19:44 -0800)]
hwmon: (lm70) Use device_get_match_data()
[ Upstream commit
6e09d75513d2670b7ab91ab3584fc5bcf2675a75 ]
Use the more modern API to get the match data out of the of match table.
This saves some code, lines, and nicely avoids referencing the match
table when it is undefined with configurations where CONFIG_OF=n.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: <linux-hwmon@vger.kernel.org>
[robh: rework to use device_get_match_data()]
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dillon Min [Wed, 26 May 2021 15:18:32 +0000 (17:18 +0200)]
media: s5p-g2d: Fix a memory leak on ctx->fh.m2m_ctx
[ Upstream commit
5d11e6aad1811ea293ee2996cec9124f7fccb661 ]
The m2m_ctx resources was allocated by v4l2_m2m_ctx_init() in g2d_open()
should be freed from g2d_release() when it's not used.
Fix it
Fixes:
918847341af0 ("[media] v4l: add G2D driver for s5p device family")
Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Mon, 14 Jun 2021 10:34:05 +0000 (12:34 +0200)]
media: subdev: remove VIDIOC_DQEVENT_TIME32 handling
[ Upstream commit
765ba251d2522e2a0daa2f0793fd0f0ce34816ec ]
Converting the VIDIOC_DQEVENT_TIME32/VIDIOC_DQEVENT32/
VIDIOC_DQEVENT32_TIME32 arguments to the canonical form is done in common
code, but for some reason I ended up adding another conversion helper to
subdev_do_ioctl() as well. I must have concluded that this does not go
through the common conversion, but it has done that since the ioctl
handler was first added.
I assume this one is harmless as there should be no way to arrive here
from user space if CONFIG_COMPAT_32BIT_TIME is set, but since it is dead
code, it should just get removed.
On a 64-bit architecture, as well as a 32-bit architecture without
CONFIG_COMPAT_32BIT_TIME, handling this command is a mistake,
and the kernel should return an error.
Fixes:
1a6c0b36dd19 ("media: v4l2-core: fix VIDIOC_DQEVENT for time64 ABI")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anshuman Khandual [Tue, 15 Jun 2021 09:32:58 +0000 (15:02 +0530)]
arm64/mm: Fix ttbr0 values stored in struct thread_info for software-pan
[ Upstream commit
9163f01130304fab1f74683d7d44632da7bda637 ]
When using CONFIG_ARM64_SW_TTBR0_PAN, a task's thread_info::ttbr0 must be
the TTBR0_EL1 value used to run userspace. With 52-bit PAs, the PA must be
packed into the TTBR using phys_to_ttbr(), but we forget to do this in some
of the SW PAN code. Thus, if the value is installed into TTBR0_EL1 (as may
happen in the uaccess routines), this could result in UNPREDICTABLE
behaviour.
Since hardware with 52-bit PA support almost certainly has HW PAN, which
will be used in preference, this shouldn't be a practical issue, but let's
fix this for consistency.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Fixes:
529c4b05a3cb ("arm64: handle 52-bit addresses in TTBR")
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/1623749578-11231-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Rutland [Tue, 3 Nov 2020 10:22:29 +0000 (10:22 +0000)]
arm64: consistently use reserved_pg_dir
[ Upstream commit
833be850f1cabd0e3b5337c0fcab20a6e936dd48 ]
Depending on configuration options and specific code paths, we either
use the empty_zero_page or the configuration-dependent reserved_ttbr0
as a reserved value for TTBR{0,1}_EL1.
To simplify this code, let's always allocate and use the same
reserved_pg_dir, replacing reserved_ttbr0. Note that this is allocated
(and hence pre-zeroed), and is also marked as read-only in the kernel
Image mapping.
Keeping this separate from the empty_zero_page potentially helps with
robustness as the empty_zero_page is used in a number of cases where a
failure to map it read-only could allow it to become corrupted.
The (presently unused) swapper_pg_end symbol is also removed, and
comments are added wherever we rely on the offsets between the
pre-allocated pg_dirs to keep these cases easily identifiable.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201103102229.8542-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhen Lei [Sat, 8 May 2021 02:03:21 +0000 (10:03 +0800)]
mmc: usdhi6rol0: fix error return code in usdhi6_probe()
[ Upstream commit
2f9ae69e5267f53e89e296fccee291975a85f0eb ]
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes:
75fa9ea6e3c0 ("mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210508020321.1677-1-thunder.leizhen@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hongbo Li [Fri, 4 Jun 2021 06:30:35 +0000 (14:30 +0800)]
crypto: sm2 - fix a memory leak in sm2
[ Upstream commit
5cd259ca5d466f65ffd21e2e2fa00fb648a8c555 ]
SM2 module alloc ec->Q in sm2_set_pub_key(), when doing alg test in
test_akcipher_one(), it will set public key for every test vector,
and don't free ec->Q. This will cause a memory leak.
This patch alloc ec->Q in sm2_ec_ctx_init().
Fixes:
ea7ecb66440b ("crypto: sm2 - introduce OSCCA SM2 asymmetric cipher algorithm")
Signed-off-by: Hongbo Li <herberthbli@tencent.com>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tianjia Zhang [Thu, 15 Oct 2020 09:24:41 +0000 (17:24 +0800)]
crypto: sm2 - remove unnecessary reset operations
[ Upstream commit
1bc608b4655b8b1491fb100f4cf4f15ae64a8698 ]
This is an algorithm optimization. The reset operation when
setting the public key is repeated and redundant, so remove it.
At the same time, `sm2_ecc_os2ec()` is optimized to make the
function more simpler and more in line with the Linux code style.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hangbin Liu [Thu, 3 Jun 2021 05:53:40 +0000 (01:53 -0400)]
crypto: x86/curve25519 - fix cpu feature checking logic in mod_exit
[ Upstream commit
1b82435d17774f3eaab35dce239d354548aa9da2 ]
In curve25519_mod_init() the curve25519_alg will be registered only when
(X86_FEATURE_BMI2 && X86_FEATURE_ADX). But in curve25519_mod_exit()
it still checks (X86_FEATURE_BMI2 || X86_FEATURE_ADX) when do crypto
unregister. This will trigger a BUG_ON in crypto_unregister_alg() as
alg->cra_refcnt is 0 if the cpu only supports one of X86_FEATURE_BMI2
and X86_FEATURE_ADX.
Fixes:
07b586fe0662 ("crypto: x86/curve25519 - replace with formally verified implementation")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Tue, 1 Jun 2021 14:51:18 +0000 (22:51 +0800)]
crypto: omap-sham - Fix PM reference leak in omap sham ops
[ Upstream commit
ca323b2c61ec321eb9f2179a405b9c34cdb4f553 ]
pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced.
Fixes:
604c31039dae4 ("crypto: omap-sham - Check for return value from pm_runtime_get_sync")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tong Tiangen [Tue, 1 Jun 2021 10:01:55 +0000 (18:01 +0800)]
crypto: nitrox - fix unchecked variable in nitrox_register_interrupts
[ Upstream commit
57c126661f50b884d3812e7db6e00f2e778eccfb ]
Function nitrox_register_interrupts leaves variable 'nr_vecs' unchecked, which
would be use as kcalloc parameter later.
Fixes:
5155e118dda9 ("crypto: cavium/nitrox - use pci_alloc_irq_vectors() while enabling MSI-X.")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Axel Lin [Mon, 7 Jun 2021 14:29:07 +0000 (22:29 +0800)]
regulator: fan53880: Fix vsel_mask setting for FAN53880_BUCK
[ Upstream commit
2e11737a772b95c6587df73f216eec1762431432 ]
According to the datasheet:
REGISTER DETAILS − 0x02 BUCK, BUCK_OUT is BIT0 ~ BIT7.
So vsel_mask for FAN53880_BUCK should be 0xFF.
Fixes:
e6dea51e2d41 ("regulator: fan53880: Add initial support")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210607142907.1599905-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gustavo A. R. Silva [Thu, 11 Mar 2021 01:40:43 +0000 (19:40 -0600)]
media: siano: Fix out-of-bounds warnings in smscore_load_firmware_family2()
[ Upstream commit
13dfead49db07225335d4f587a560a2210391a1a ]
Rename struct sms_msg_data4 to sms_msg_data5 and increase the size of
its msg_data array from 4 to 5 elements. Notice that at some point
the 5th element of msg_data is being accessed in function
smscore_load_firmware_family2():
1006 trigger_msg->msg_data[4] = 4; /* Task ID */
Also, there is no need for the object _trigger_msg_ of type struct
sms_msg_data *, when _msg_ can be used, directly. Notice that msg_data
in struct sms_msg_data is a one-element array, which causes multiple
out-of-bounds warnings when accessing beyond its first element
in function smscore_load_firmware_family2():
992 struct sms_msg_data *trigger_msg =
993 (struct sms_msg_data *) msg;
994
995 pr_debug("sending MSG_SMS_SWDOWNLOAD_TRIGGER_REQ\n");
996 SMS_INIT_MSG(&msg->x_msg_header,
997 MSG_SMS_SWDOWNLOAD_TRIGGER_REQ,
998 sizeof(struct sms_msg_hdr) +
999 sizeof(u32) * 5);
1000
1001 trigger_msg->msg_data[0] = firmware->start_address;
1002 /* Entry point */
1003 trigger_msg->msg_data[1] = 6; /* Priority */
1004 trigger_msg->msg_data[2] = 0x200; /* Stack size */
1005 trigger_msg->msg_data[3] = 0; /* Parameter */
1006 trigger_msg->msg_data[4] = 4; /* Task ID */
even when enough dynamic memory is allocated for _msg_:
929 /* PAGE_SIZE buffer shall be enough and dma aligned */
930 msg = kmalloc(PAGE_SIZE, GFP_KERNEL | coredev->gfp_buf_flags);
but as _msg_ is casted to (struct sms_msg_data *):
992 struct sms_msg_data *trigger_msg =
993 (struct sms_msg_data *) msg;
the out-of-bounds warnings are actually valid and should be addressed.
Fix this by declaring object _msg_ of type struct sms_msg_data5 *,
which contains a 5-elements array, instead of just 4. And use
_msg_ directly, instead of creating object trigger_msg.
This helps with the ongoing efforts to enable -Warray-bounds by fixing
the following warnings:
CC [M] drivers/media/common/siano/smscoreapi.o
drivers/media/common/siano/smscoreapi.c: In function ‘smscore_load_firmware_family2’:
drivers/media/common/siano/smscoreapi.c:1003:24: warning: array subscript 1 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
1003 | trigger_msg->msg_data[1] = 6; /* Priority */
| ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
619 | u32 msg_data[1];
| ^~~~~~~~
drivers/media/common/siano/smscoreapi.c:1004:24: warning: array subscript 2 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
1004 | trigger_msg->msg_data[2] = 0x200; /* Stack size */
| ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
619 | u32 msg_data[1];
| ^~~~~~~~
drivers/media/common/siano/smscoreapi.c:1005:24: warning: array subscript 3 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
1005 | trigger_msg->msg_data[3] = 0; /* Parameter */
| ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
619 | u32 msg_data[1];
| ^~~~~~~~
drivers/media/common/siano/smscoreapi.c:1006:24: warning: array subscript 4 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
1006 | trigger_msg->msg_data[4] = 4; /* Task ID */
| ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
619 | u32 msg_data[1];
| ^~~~~~~~
Fixes:
018b0c6f8acb ("[media] siano: make load firmware logic to work with newer firmwares")
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Thu, 27 May 2021 00:12:51 +0000 (17:12 -0700)]
m68k: atari: Fix ATARI_KBD_CORE kconfig unmet dependency warning
[ Upstream commit
c1367ee016e3550745315fb9a2dd1e4ce02cdcf6 ]
Since the code for ATARI_KBD_CORE does not use drivers/input/keyboard/
code, just move ATARI_KBD_CORE to arch/m68k/Kconfig.machine to remove
the dependency on INPUT_KEYBOARD.
Removes this kconfig warning:
WARNING: unmet direct dependencies detected for ATARI_KBD_CORE
Depends on [n]: !UML && INPUT [=y] && INPUT_KEYBOARD [=n]
Selected by [y]:
- MOUSE_ATARI [=y] && !UML && INPUT [=y] && INPUT_MOUSE [=y] && ATARI [=y]
Fixes:
c04cb856e20a ("m68k: Atari keyboard and mouse support.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Suggested-by: Michael Schmitz <schmitzmic@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20210527001251.8529-1-rdunlap@infradead.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Hovold [Mon, 24 May 2021 11:09:18 +0000 (13:09 +0200)]
media: gspca/gl860: fix zero-length control requests
[ Upstream commit
8ed339f23d41e21660a389adf2e7b2966d457ff6 ]
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Control transfers without a data stage are treated as OUT requests by
the USB stack and should be using usb_sndctrlpipe(). Failing to do so
will now trigger a warning.
Fix the gl860_RTx() helper so that zero-length control reads fail with
an error message instead. Note that there are no current callers that
would trigger this.
Fixes:
4f7cb8837cec ("V4L/DVB (12954): gspca - gl860: Addition of GL860 based webcams")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhen Lei [Sat, 15 May 2021 06:58:30 +0000 (08:58 +0200)]
media: tc358743: Fix error return code in tc358743_probe_of()
[ Upstream commit
a6b1e7093f0a099571fc8836ab4a589633f956a8 ]
When the CSI bps per lane is not in the valid range, an appropriate error
code -EINVAL should be returned. However, we currently do not explicitly
assign this error code to 'ret'. As a result, 0 was incorrectly returned.
Fixes:
256148246852 ("[media] tc358743: support probe from device tree")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Fri, 14 May 2021 14:20:38 +0000 (16:20 +0200)]
media: au0828: fix a NULL vs IS_ERR() check
[ Upstream commit
8f2e452730d2bcd59fe05246f0e19a4c52e0012d ]
The media_device_usb_allocate() function returns error pointers when
it's enabled and something goes wrong. It can return NULL as well, but
only if CONFIG_MEDIA_CONTROLLER is disabled so that doesn't apply here.
Fixes:
812658d88d26 ("media: change au0828 to use Media Device Allocator API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lv Yunlong [Sun, 9 May 2021 08:12:31 +0000 (10:12 +0200)]
media: exynos4-is: Fix a use after free in isp_video_release
[ Upstream commit
01fe904c9afd26e79c1f73aa0ca2e3d785e5e319 ]
In isp_video_release, file->private_data is freed via
_vb2_fop_release()->v4l2_fh_release(). But the freed
file->private_data is still used in v4l2_fh_is_singular_file()
->v4l2_fh_is_singular(file->private_data), which is a use
after free bug.
My patch uses a variable 'is_singular_file' to avoid the uaf.
v3: https://lore.kernel.org/patchwork/patch/1419058/
Fixes:
34947b8aebe3f ("[media] exynos4-is: Add the FIMC-IS ISP capture DMA driver")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ezequiel Garcia [Wed, 5 May 2021 12:23:45 +0000 (14:23 +0200)]
media: rkvdec: Fix .buf_prepare
[ Upstream commit
ba1ed4ae760a81caf39f54232e089d95157a0dba ]
The driver should only set the payload on .buf_prepare if the
buffer is CAPTURE type. If an OUTPUT buffer has a zero bytesused
set by userspace then v4l2-core will set it to buffer length.
If we overwrite bytesused for OUTPUT buffers, too, then
vb2_get_plane_payload() will return incorrect value which might be then
written to hw registers by the driver in rkvdec-h264.c.
[Changed the comment and used V4L2_TYPE_IS_CAPTURE macro]
Fixes:
cd33c830448ba ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Mon, 24 May 2021 22:41:50 +0000 (15:41 -0700)]
locking/lockdep: Reduce LOCKDEP dependency list
[ Upstream commit
b8e00abe7d9fe21dd13609e2e3a707e38902b105 ]
Some arches (um, sparc64, riscv, xtensa) cause a Kconfig warning for
LOCKDEP.
These arch-es select LOCKDEP_SUPPORT but they are not listed as one
of the arch-es that LOCKDEP depends on.
Since (16) arch-es define the Kconfig symbol LOCKDEP_SUPPORT if they
intend to have LOCKDEP support, replace the awkward list of
arch-es that LOCKDEP depends on with the LOCKDEP_SUPPORT symbol.
But wait. LOCKDEP_SUPPORT is included in LOCK_DEBUGGING_SUPPORT,
which is already a dependency here, so LOCKDEP_SUPPORT is redundant
and not needed.
That leaves the FRAME_POINTER dependency, but it is part of an
expression like this:
depends on (A && B) && (FRAME_POINTER || B')
where B' is a dependency of B so if B is true then B' is true
and the value of FRAME_POINTER does not matter.
Thus we can also delete the FRAME_POINTER dependency.
Fixes this kconfig warning: (for um, sparc64, riscv, xtensa)
WARNING: unmet direct dependencies detected for LOCKDEP
Depends on [n]: DEBUG_KERNEL [=y] && LOCK_DEBUGGING_SUPPORT [=y] && (FRAME_POINTER [=n] || MIPS || PPC || S390 || MICROBLAZE || ARM || ARC || X86)
Selected by [y]:
- PROVE_LOCKING [=y] && DEBUG_KERNEL [=y] && LOCK_DEBUGGING_SUPPORT [=y]
- LOCK_STAT [=y] && DEBUG_KERNEL [=y] && LOCK_DEBUGGING_SUPPORT [=y]
- DEBUG_LOCK_ALLOC [=y] && DEBUG_KERNEL [=y] && LOCK_DEBUGGING_SUPPORT [=y]
Fixes:
7d37cb2c912d ("lib: fix kconfig dependency on ARCH_WANT_FRAME_POINTERS")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/20210524224150.8009-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sergey Shtylyov [Sat, 20 Mar 2021 20:32:38 +0000 (23:32 +0300)]
pata_ep93xx: fix deferred probing
[ Upstream commit
5c8121262484d99bffb598f39a0df445cecd8efb ]
The driver overrides the error codes returned by platform_get_irq() to
-ENXIO, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Propagate the error code
upstream, as it should have been done from the start...
Fixes:
2fff27512600 ("PATA host controller driver for ep93xx")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/509fda88-2e0d-2cc7-f411-695d7e94b136@omprussia.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Thu, 6 May 2021 05:38:56 +0000 (07:38 +0200)]
media: rc: i2c: Fix an error message
[ Upstream commit
9c87ae1a0dbeb5794957421157fd266d38a869b4 ]
'ret' is known to be 1 here. In fact 'i' is expected instead.
Store the return value of 'i2c_master_recv()' in 'ret' so that the error
message print the correct error code.
Fixes:
acaa34bf06e9 ("media: rc: implement zilog transmitter")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sun, 16 May 2021 06:58:04 +0000 (08:58 +0200)]
crypto: ccp - Fix a resource leak in an error handling path
[ Upstream commit
a6f8e68e238a15bb15f1726b35c695136c64eaba ]
If an error occurs after calling 'sp_get_irqs()', 'sp_free_irqs()' must be
called as already done in the error handling path.
Fixes:
f4d18d656f88 ("crypto: ccp - Abstract interrupt registeration")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Suman Anna [Fri, 14 May 2021 16:12:43 +0000 (11:12 -0500)]
crypto: sa2ul - Fix pm_runtime enable in sa_ul_probe()
[ Upstream commit
5c8552325e013cbdabc443cd1f1b4d03c4a2e64e ]
The pm_runtime APIs added first in commit
7694b6ca649f ("crypto: sa2ul -
Add crypto driver") are not unwound properly and was fixed up partially
in commit
13343badae09 ("crypto: sa2ul - Fix PM reference leak in
sa_ul_probe()"). This fixed up the pm_runtime usage count but not the
state. Fix this properly.
Fixes:
13343badae09 ("crypto: sa2ul - Fix PM reference leak in sa_ul_probe()")
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Suman Anna [Fri, 14 May 2021 16:12:42 +0000 (11:12 -0500)]
crypto: sa2ul - Fix leaks on failure paths with sa_dma_init()
[ Upstream commit
4c0716ee1d973f6504d13f0e8d4d10350c85ad37 ]
The sa_dma_init() function doesn't release the requested dma channels
on all failure paths. Any failure in this function also ends up
leaking the dma pool created in sa_init_mem() in the sa_ul_probe()
function. Fix all of these issues.
Fixes:
7694b6ca649f ("crypto: sa2ul - Add crypto driver")
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joe Richey [Fri, 21 May 2021 08:58:42 +0000 (01:58 -0700)]
x86/elf: Use _BITUL() macro in UAPI headers
[ Upstream commit
d06aca989c243dd9e5d3e20aa4e5c2ecfdd07050 ]
Replace BIT() in x86's UAPI header with _BITUL(). BIT() is not defined
in the UAPI headers and its usage may cause userspace build errors.
Fixes:
742c45c3ecc9 ("x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2")
Signed-off-by: Joe Richey <joerichey@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210521085849.37676-2-joerichey94@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mimi Zohar [Mon, 26 Apr 2021 22:13:45 +0000 (18:13 -0400)]
evm: fix writing <securityfs>/evm overflow
[ Upstream commit
49219d9b8785ba712575c40e48ce0f7461254626 ]
EVM_SETUP_COMPLETE is defined as 0x80000000, which is larger than INT_MAX.
The "-fno-strict-overflow" compiler option properly prevents signaling
EVM that the EVM policy setup is complete. Define and read an unsigned
int.
Fixes:
f00d79750712 ("EVM: Allow userspace to signal an RSA key has been loaded")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sergey Shtylyov [Tue, 18 May 2021 20:38:54 +0000 (23:38 +0300)]
pata_octeon_cf: avoid WARN_ON() in ata_host_activate()
[ Upstream commit
bfc1f378c8953e68ccdbfe0a8c20748427488b80 ]
Iff platform_get_irq() fails (or returns IRQ0) and thus the polling mode
has to be used, ata_host_activate() hits the WARN_ON() due to 'irq_handler'
parameter being non-NULL if the polling mode is selected. Let's only set
the pointer to the driver's IRQ handler if platform_get_irq() returns a
valid IRQ # -- this should avoid the unnecessary WARN_ON()...
Fixes:
43f01da0f279 ("MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/3a241167-f84d-1d25-5b9b-be910afbe666@omp.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Josh Poimboeuf [Tue, 18 May 2021 23:59:15 +0000 (18:59 -0500)]
kbuild: Fix objtool dependency for 'OBJECT_FILES_NON_STANDARD_<obj> := n'
[ Upstream commit
8852c552402979508fdc395ae07aa8761aa46045 ]
"OBJECT_FILES_NON_STANDARD_vma.o := n" has a dependency bug. When
objtool source is updated, the affected object doesn't get re-analyzed
by objtool.
Peter's new variable-sized jump label feature relies on objtool
rewriting the object file. Otherwise the system can fail to boot. That
effectively upgrades this minor dependency issue to a major bug.
The problem is that variables in prerequisites are expanded early,
during the read-in phase. The '$(objtool_dep)' variable indirectly uses
'$@', which isn't yet available when the target prerequisites are
evaluated.
Use '.SECONDEXPANSION:' which causes '$(objtool_dep)' to be expanded in
a later phase, after the target-specific '$@' variable has been defined.
Fixes:
b9ab5ebb14ec ("objtool: Add CONFIG_STACK_VALIDATION option")
Fixes:
ab3257042c26 ("jump_label, x86: Allow short NOPs")
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qais Yousef [Mon, 10 May 2021 14:50:32 +0000 (15:50 +0100)]
sched/uclamp: Fix locking around cpu_util_update_eff()
[ Upstream commit
93b73858701fd01de26a4a874eb95f9b7156fd4b ]
cpu_cgroup_css_online() calls cpu_util_update_eff() without holding the
uclamp_mutex or rcu_read_lock() like other call sites, which is
a mistake.
The uclamp_mutex is required to protect against concurrent reads and
writes that could update the cgroup hierarchy.
The rcu_read_lock() is required to traverse the cgroup data structures
in cpu_util_update_eff().
Surround the caller with the required locks and add some asserts to
better document the dependency in cpu_util_update_eff().
Fixes:
7226017ad37a ("sched/uclamp: Fix a bug in propagating uclamp value in new cgroups")
Reported-by: Quentin Perret <qperret@google.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210510145032.1934078-3-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qais Yousef [Mon, 10 May 2021 14:50:31 +0000 (15:50 +0100)]
sched/uclamp: Fix wrong implementation of cpu.uclamp.min
[ Upstream commit
0c18f2ecfcc274a4bcc1d122f79ebd4001c3b445 ]
cpu.uclamp.min is a protection as described in cgroup-v2 Resource
Distribution Model
Documentation/admin-guide/cgroup-v2.rst
which means we try our best to preserve the minimum performance point of
tasks in this group. See full description of cpu.uclamp.min in the
cgroup-v2.rst.
But the current implementation makes it a limit, which is not what was
intended.
For example:
tg->cpu.uclamp.min = 20%
p0->uclamp[UCLAMP_MIN] = 0
p1->uclamp[UCLAMP_MIN] = 50%
Previous Behavior (limit):
p0->effective_uclamp = 0
p1->effective_uclamp = 20%
New Behavior (Protection):
p0->effective_uclamp = 20%
p1->effective_uclamp = 50%
Which is inline with how protections should work.
With this change the cgroup and per-task behaviors are the same, as
expected.
Additionally, we remove the confusing relationship between cgroup and
!user_defined flag.
We don't want for example RT tasks that are boosted by default to max to
change their boost value when they attach to a cgroup. If a cgroup wants
to limit the max performance point of tasks attached to it, then
cpu.uclamp.max must be set accordingly.
Or if they want to set different boost value based on cgroup, then
sysctl_sched_util_clamp_min_rt_default must be used to NOT boost to max
and set the right cpu.uclamp.min for each group to let the RT tasks
obtain the desired boost value when attached to that group.
As it stands the dependency on !user_defined flag adds an extra layer of
complexity that is not required now cpu.uclamp.min behaves properly as
a protection.
The propagation model of effective cpu.uclamp.min in child cgroups as
implemented by cpu_util_update_eff() is still correct. The parent
protection sets an upper limit of what the child cgroups will
effectively get.
Fixes:
3eac870a3247 (sched/uclamp: Use TG's clamps to restrict TASK's clamps)
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210510145032.1934078-2-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Fri, 30 Apr 2021 20:19:55 +0000 (22:19 +0200)]
media: I2C: change 'RST' to "RSET" to fix multiple build errors
[ Upstream commit
8edcb5049ac29aa3c8acc5ef15dd4036543d747e ]
The use of an enum named 'RST' conflicts with a #define macro
named 'RST' in arch/mips/include/asm/mach-rc32434/rb.h.
The MIPS use of RST was there first (AFAICT), so change the
media/i2c/ uses of RST to be named 'RSET'.
'git grep -w RSET' does not report any naming conflicts with the
new name.
This fixes multiple build errors:
arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token
15 | #define RST (1 << 15)
| ^
drivers/media/i2c/s5c73m3/s5c73m3.h:356:2: note: in expansion of macro 'RST'
356 | RST,
| ^~~
../arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token
15 | #define RST (1 << 15)
| ^
../drivers/media/i2c/s5k6aa.c:180:2: note: in expansion of macro 'RST'
180 | RST,
| ^~~
../arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token
15 | #define RST (1 << 15)
| ^
../drivers/media/i2c/s5k5baf.c:238:2: note: in expansion of macro 'RST'
238 | RST,
| ^~~
and some others that I have trimmed.
Fixes:
cac47f1822fc ("[media] V4L: Add S5C73M3 camera driver")
Fixes:
8b99312b7214 ("[media] Add v4l2 subdev driver for S5K4ECGX sensor")
Fixes:
7d459937dc09 ("[media] Add driver for Samsung S5K5BAF camera sensor")
Fixes:
bfa8dd3a0524 ("[media] v4l: Add v4l2 subdev driver for S5K6AAFX sensor")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Sangwook Lee <sangwook.lee@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sergey Shtylyov [Mon, 15 Mar 2021 11:46:53 +0000 (14:46 +0300)]
pata_rb532_cf: fix deferred probing
[ Upstream commit
2d3a62fbae8e5badc2342388f65ab2191c209cc0 ]
The driver overrides the error codes returned by platform_get_irq() to
-ENOENT, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Switch to propagating the
error code upstream, still checking/overriding IRQ0 as libata regards it
as "no IRQ" (thus polling) anyway...
Fixes:
9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/771ced55-3efb-21f5-f21c-b99920aae611@omprussia.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sergey Shtylyov [Sun, 14 Mar 2021 20:34:27 +0000 (23:34 +0300)]
sata_highbank: fix deferred probing
[ Upstream commit
4a24efa16e7db02306fb5db84518bb0a7ada5a46 ]
The driver overrides the error codes returned by platform_get_irq() to
-EINVAL, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Switch to propagating the
error code upstream, still checking/overriding IRQ0 as libata regards it
as "no IRQ" (thus polling) anyway...
Fixes:
9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/105b456d-1199-f6e9-ceb7-ffc5ba551d1a@omprussia.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhen Lei [Sat, 8 May 2021 07:00:49 +0000 (15:00 +0800)]
crypto: ux500 - Fix error return code in hash_hw_final()
[ Upstream commit
b01360384009ab066940b45f34880991ea7ccbfb ]
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes:
8a63b1994c50 ("crypto: ux500 - Add driver for HASH hardware")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corentin Labbe [Wed, 5 May 2021 20:26:09 +0000 (20:26 +0000)]
crypto: ixp4xx - update IV after requests
[ Upstream commit
e8acf011f2e7e21a7e2fae47cbaa06598e533d40 ]
Crypto selftests fail on ixp4xx since it do not update IV after skcipher
requests.
Fixes:
81bef0150074 ("crypto: ixp4xx - Hardware crypto support for IXP4xx CPUs")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corentin Labbe [Wed, 5 May 2021 20:26:08 +0000 (20:26 +0000)]
crypto: ixp4xx - dma_unmap the correct address
[ Upstream commit
9395c58fdddd79cdd3882132cdd04e8ac7ad525f ]
Testing ixp4xx_crypto with CONFIG_DMA_API_DEBUG lead to the following error:
DMA-API: platform ixp4xx_crypto.0: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=24 bytes]
This is due to dma_unmap using the wrong address.
Fixes:
0d44dc59b2b4 ("crypto: ixp4xx - Fix handling of chained sg buffers")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mauro Carvalho Chehab [Wed, 28 Apr 2021 06:27:55 +0000 (08:27 +0200)]
media: hantro: do a PM resume earlier
[ Upstream commit
892bb6ecead9b834ba7ad1d07513e9eba1baa3a4 ]
The device_run() first enables the clock and then
tries to resume PM runtime, checking for errors.
Well, if for some reason the pm_runtime can not resume,
it would be better to detect it beforehand.
So, change the order inside device_run().
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Fixes:
775fec69008d ("media: add Rockchip VPU JPEG encoder driver")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mauro Carvalho Chehab [Wed, 28 Apr 2021 07:38:56 +0000 (09:38 +0200)]
media: s5p_cec: decrement usage count if disabled
[ Upstream commit
747bad54a677d8633ec14b39dfbeb859c821d7f2 ]
There's a bug at s5p_cec_adap_enable(): if called to
disable the device, it should call pm_runtime_put()
instead of pm_runtime_disable(), as the goal here is to
decrement the usage_count and not to disable PM runtime.
Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes:
1bcbf6f4b6b0 ("[media] cec: s5p-cec: Add s5p-cec driver")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mauro Carvalho Chehab [Tue, 27 Apr 2021 08:39:47 +0000 (10:39 +0200)]
media: venus: Rework error fail recover logic
[ Upstream commit
4cba5473c5ce0f1389d316c5dc6f83a0259df5eb ]
The Venus code has a sort of watchdog that attempts to recover
from IP errors, implemented as a delayed work job, which
calls venus_sys_error_handler().
Right now, it has several issues:
1. It assumes that PM runtime resume never fails
2. It internally runs two while() loops that also assume that
PM runtime will never fail to go idle:
while (pm_runtime_active(core->dev_dec) || pm_runtime_active(core->dev_enc))
msleep(10);
...
while (core->pmdomains[0] && pm_runtime_active(core->pmdomains[0]))
usleep_range(1000, 1500);
3. It uses an OR to merge all return codes and then report to the user
4. If the hardware never recovers, it keeps running on every 10ms,
flooding the syslog with 2 messages (so, up to 200 messages
per second).
Rework the code, in order to prevent that, by:
1. check the return code from PM runtime resume;
2. don't let the while() loops run forever;
3. store the failed event;
4. use warn ratelimited when it fails to recover.
Fixes:
af2c3834c8ca ("[media] media: venus: adding core part and helper functions")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Tue, 20 Apr 2021 16:44:25 +0000 (19:44 +0300)]
spi: Avoid undefined behaviour when counting unused native CSs
[ Upstream commit
f60d7270c8a3d2beb1c23ae0da42497afa3584c2 ]
ffz(), that has been used to count unused native CSs,
might cause undefined behaviour when called against ~0U.
To fix that, open code it with ffs(~value) - 1.
Fixes:
7d93aecdb58d ("spi: Add generic support for unused native cs with cs-gpios")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210420164425.40287-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Tue, 20 Apr 2021 16:44:24 +0000 (19:44 +0300)]
spi: Allow to have all native CSs in use along with GPIOs
[ Upstream commit
dbaca8e56ea3f23fa215f48c2d46dd03ede06e02 ]
The commit
7d93aecdb58d ("spi: Add generic support for unused native cs
with cs-gpios") excludes the valid case for the controllers that doesn't
need to switch native CS in order to perform the transfer, i.e. when
0 native
... ...
<n> - 1 native
<n> GPIO
<n> + 1 GPIO
... ...
where <n> defines maximum of native CSs supported by the controller.
To allow this, bail out from spi_get_gpio_descs() conditionally for
the controllers which explicitly marked with SPI_MASTER_GPIO_SS.
Fixes:
7d93aecdb58d ("spi: Add generic support for unused native cs with cs-gpios")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210420164425.40287-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Roman Gushchin [Tue, 29 Jun 2021 02:35:47 +0000 (19:35 -0700)]
writeback, cgroup: increment isw_nr_in_flight before grabbing an inode
[ Upstream commit
8826ee4fe75051f8cbfa5d4a9aa70565938e724c ]
isw_nr_in_flight is used to determine whether the inode switch queue
should be flushed from the umount path. Currently it's increased after
grabbing an inode and even scheduling the switch work. It means the
umount path can walk past cleanup_offline_cgwb() with active inode
references, which can result in a "Busy inodes after unmount." message and
use-after-free issues (with inode->i_sb which gets freed).
Fix it by incrementing isw_nr_in_flight before doing anything with the
inode and decrementing in the case when switching wasn't scheduled.
The problem hasn't yet been seen in the real life and was discovered by
Jan Kara by looking into the code.
Link: https://lkml.kernel.org/r/20210608230225.2078447-4-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Suggested-by: Jan Kara <jack@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Tue, 29 Jun 2021 02:33:41 +0000 (19:33 -0700)]
ia64: mca_drv: fix incorrect array size calculation
[ Upstream commit
c5f320ff8a79501bb59338278336ec43acb9d7e2 ]
gcc points out a mistake in the mca driver that goes back to before the
git history:
arch/ia64/kernel/mca_drv.c: In function 'init_record_index_pools':
arch/ia64/kernel/mca_drv.c:346:54: error: expression does not compute the number of elements in this array; element typ
e is 'int', not 'size_t' {aka 'long unsigned int'} [-Werror=sizeof-array-div]
346 | for (i = 1; i < sizeof sal_log_sect_min_sizes/sizeof(size_t); i++)
| ^
This is the same as sizeof(size_t), which is two shorter than the actual
array. Use the ARRAY_SIZE() macro to get the correct calculation instead.
Link: https://lkml.kernel.org/r/20210514214123.875971-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Petr Mladek [Tue, 29 Jun 2021 02:33:35 +0000 (19:33 -0700)]
kthread_worker: fix return value when kthread_mod_delayed_work() races with kthread_cancel_delayed_work_sync()
[ Upstream commit
d71ba1649fa3c464c51ec7163e4b817345bff2c7 ]
kthread_mod_delayed_work() might race with
kthread_cancel_delayed_work_sync() or another kthread_mod_delayed_work()
call. The function lets the other operation win when it sees
work->canceling counter set. And it returns @false.
But it should return @true as it is done by the related workqueue API, see
mod_delayed_work_on().
The reason is that the return value might be used for reference counting.
It has to distinguish the case when the number of queued works has changed
or stayed the same.
The change is safe. kthread_mod_delayed_work() return value is not
checked anywhere at the moment.
Link: https://lore.kernel.org/r/20210521163526.GA17916@redhat.com
Link: https://lkml.kernel.org/r/20210610133051.15337-4-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Minchan Kim <minchan@google.com>
Cc: <jenhaochen@google.com>
Cc: Martin Liu <liumartin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ming Lei [Mon, 28 Jun 2021 02:33:12 +0000 (10:33 +0800)]
block: fix discard request merge
[ Upstream commit
2705dfb2094777e405e065105e307074af8965c1 ]
ll_new_hw_segment() is reached only in case of single range discard
merge, and we don't have max discard segment size limit actually, so
it is wrong to run the following check:
if (req->nr_phys_segments + nr_phys_segs > blk_rq_get_max_segments(req))
it may be always false since req->nr_phys_segments is initialized as
one, and bio's segment count is still 1, blk_rq_get_max_segments(reg)
is 1 too.
Fix the issue by not doing the check and bypassing the calculation of
discard request's nr_phys_segments.
Based on analysis from Wang Shanker.
Cc: Christoph Hellwig <hch@lst.de>
Reported-by: Wang Shanker <shankerwangmiao@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210628023312.1903255-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shawn Guo [Tue, 22 Jun 2021 00:39:18 +0000 (08:39 +0800)]
mailbox: qcom: Use PLATFORM_DEVID_AUTO to register platform device
[ Upstream commit
96e39e95c01283ff5695dafe659df88ada802159 ]
In adding APCS clock support for MSM8939, the second clock registration
fails due to duplicate device name like below.
[ 0.519657] sysfs: cannot create duplicate filename '/bus/platform/devices/qcom-apcs-msm8916-clk'
...
[ 0.661158] qcom_apcs_ipc b111000.mailbox: failed to register APCS clk
This is because MSM8939 has 3 APCS instances for Cluster0 (little cores),
Cluster1 (big cores) and CCI (Cache Coherent Interconnect). Although
only APCS of Cluster0 and Cluster1 have IPC bits, each of 3 APCS has
A53PLL clock control bits. That said, 3 'qcom-apcs-msm8916-clk' devices
need to be registered to instantiate all 3 clocks. Use PLATFORM_DEVID_AUTO
rather than PLATFORM_DEVID_NONE for platform_device_register_data() call
to fix the issue above.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Steve French [Thu, 24 Jun 2021 20:28:04 +0000 (15:28 -0500)]
cifs: fix missing spinlock around update to ses->status
[ Upstream commit
0060a4f28a9ef45ae8163c0805e944a2b1546762 ]
In the other places where we update ses->status we protect the
updates via GlobalMid_Lock. So to be consistent add the same
locking around it in cifs_put_smb_ses where it was missing.
Addresses-Coverity: 1268904 ("Data race condition")
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jason Gerecke [Wed, 23 Jun 2021 16:58:09 +0000 (09:58 -0700)]
HID: wacom: Correct base usage for capacitive ExpressKey status bits
[ Upstream commit
424d8237945c6c448c8b3f23885d464fb5685c97 ]
The capacitive status of ExpressKeys is reported with usages beginning
at 0x940, not 0x950. Bring our driver into alignment with reality.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>