review.tizen.org Git - platform/kernel/linux-rpi.git/log

drm/omap: print error instead of WARN() if plane setup fails

omap_plane_atomic_update() does WARN_ON() if dispc rejects the given
plane config. Change that to dev_err() to lessen the possible spam.

To fix this correctly, the plane setup needs much more work by creating
a check function for dispc setup, so that we could reliably check the
config in atomic_check, instead of only noticing the problem when
programming dispc.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: cleanup omap_plane_atomic_check()

Clean up omap_plane_atomic_check() with:

- Check state->fb first. If no fb, return 0.
- use drm_atomic_get_existing_crtc_state() instead of
drm_atomic_get_crtc_state()

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

drm/omap: fix plane check when crtc is disabled

I sometimes see:

[drm:drm_framebuffer_remove [drm]] *ERROR* failed to reset crtc ed2a6c00
when fb was deleted: -22

which comes from drm_framebuffer_remove() when it's disabling the crtc
with zeroed drm_mode_set.

The problem in omap_plane_atomic_check() is that it will use those
zeroed fields to verify if the setup is correct.

This patch makes omap_plane_atomic_check() return 0 if the crtc is
disabled.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Merge branch 'linux-4.9' of git://github.com/skeggsb/linux into drm-next

Karol's work which greatly improves volt/clock changes on a
heap of boards, nothing too exciting beyond a random collection of fixes.

* 'linux-4.9' of git://github.com/skeggsb/linux: (33 commits)
  drm/nouveau/fb/nv50: defer DMA mapping of scratch page to oneinit() hook
  drm/nouveau/fb/gf100: defer DMA mapping of scratch page to oneinit() hook
  drm/nouveau/pci: set streaming DMA mask early
  drm/nouveau/kms: add Maxwell to backlight initialization
  drm/nouveau/bar/nv50: fix bar2 vm size
  drm/nouveau/disp: remove unused function in sorg94.c
  drm/nouveau/volt: use kernel's 64-bit signed division function
  drm/nouveau/core: add missing header dependencies
  drm/nouveau/gr/nv3x: add 0x0597 kelvin 3d class support
  drm/nouveau/drm/nouveau: add a LED driver for the NVIDIA logo
  drm/nouveau/fb/ram: Use Kepler implementation on Maxwell
  drm/nouveau/volt: Make use of cvb coefficients
  drm/nouveau/volt/gf100-: Add speedo
  drm/nouveau/volt: Add implementation for gf100
  drm/nouveau/bios/vmap: unk0 field is the mode
  drm/nouveau/volt: Don't require perfect fit
  drm/nouveau/clk: Allow boosting only when NvBoost is set
  drm/nouveau/bios: Add parsing of VPSTATE table
  drm/nouveau/clk: Respect voltage limits in nvkm_cstate_prog
  drm/nouveau/clk: Fixup cstate selection
  ...

Merge tag 'topic/drm-misc-2016-10-27' of git://anongit.freedesktop.org/git/drm-intel into drm-next

Pull request already again to get the s/fence/dma_fence/ stuff in and
allow everyone to resync. Otherwise really just misc stuff all over, and a
new bridge driver.

* tag 'topic/drm-misc-2016-10-27' of git://anongit.freedesktop.org/git/drm-intel:
  drm/bridge: fix platform_no_drv_owner.cocci warnings
  drm/bridge: fix semicolon.cocci warnings
  drm: Print some debug/error info during DP dual mode detect
  drm: mark drm_of_component_match_add dummy inline
  drm/bridge: add Silicon Image SiI8620 driver
  dt-bindings: add Silicon Image SiI8620 bridge bindings
  video: add header file for Mobile High-Definition Link (MHL) interface
  drm: convert DT component matching to component_match_add_release()
  dma-buf: Rename struct fence to dma_fence
  dma-buf/fence: add an lockdep_assert_held()
  drm/dp: Factor out helper to distinguish between branch and sink devices
  drm/edid: Only print the bad edid when aborting
  drm/msm: add missing header dependencies
  drm/msm/adreno: move function declarations to header file
  drm/i2c/tda998x: mark symbol static where possible
  doc: add missing docbook parameter for fence-array
  drm: RIP mode_config->rotation_property
  drm/msm/mdp5: Advertize 180 degree rotation
  drm/msm/mdp5: Use per-plane rotation property

Merge branch 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux into drm-next

First new feature pull for 4.10.  Highlights:
- Support for multple virtual displays in the virtual dce component
- New VM mgr to support non-contiguous vram buffers
- Support for UVD powergating on additional asics
- Power management improvements
- lots of code cleanup and bug fixes

* 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (107 commits)
  drm/amdgpu: turn on/off uvd clock when dpm enable/disable on CI
  drm/amdgpu: disable dpm before turn off clock when vce idle.
  drm/amdgpu: enable uvd bypass mode for CI/VI.
  drm/amdgpu: just not load smc firmware if smu is already running
  drm/amdgpu: when suspend, set boot state instand of disable dpm.
  drm/amdgpu: use failed label to handle context init failure
  drm/amdgpu: add amdgpu_ttm_bo_eviction_valuable callback
  drm/ttm: make eviction decision a driver callback v2
  drm/ttm: fix coding style in ttm_bo_driver.h
  drm/radeon/pm: autoswitch power state when in balanced mode
  drm/amd/powerplay: fix spelling mistake and add KERN_WARNING to printks
  drm/amdgpu:new ids flag for preempt
  drm/amdgpu: mark symbols static where possible
  drm/amdgpu: change function declarations and add missing header dependencies
  drm/amdgpu: s/amdgpuCrtc/amdgpu_crtc/ in pageflip code
  drm/amdgpu/atom: remove a bunch of unused functions
  drm/amdgpu: consolidate atom scratch reg handling for hangs
  drm/amdgpu: use amdgpu_bo_[create|free]_kernel for wb
  drm/amdgpu: add VCE VM session tracking
  drm/amdgpu: improve parse_cs handling a bit
  ...

drm/amdgpu: turn on/off uvd clock when dpm enable/disable on CI

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: disable dpm before turn off clock when vce idle.

v2: move return value check as well

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable uvd bypass mode for CI/VI.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: just not load smc firmware if smu is already running

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: when suspend, set boot state instand of disable dpm.

fix pm-hibernate bug, when suspend/resume, dpm start failed.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use failed label to handle context init failure

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/bridge: fix platform_no_drv_owner.cocci warnings

drivers/gpu/drm/bridge/sil-sii8620.c:1556:3-8: No need to set .owner here. The core will do it.

Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

CC: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161026165836.GA98766@lkp-sb04.lkp.intel.com

drm/bridge: fix semicolon.cocci warnings

drivers/gpu/drm/bridge/sil-sii8620.c:988:2-3: Unneeded semicolon

Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

CC: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161026165836.GA98907@lkp-sb04.lkp.intel.com

drm: Print some debug/error info during DP dual mode detect

There's at least one LSPCON device that occasionally returns an unexpected
adaptor ID which leads to a failed detect. Print some debug info to help
debugging this and future cases. Also print an error for an unexpected
adaptor ID, so users can report it.

v2:
- s/adapter/adaptor/ and add code comment about incorrect type 1 adaptor
IDs. (Ville)

Cc: dri-devel@lists.freedesktop.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1477499359-12001-1-git-send-email-imre.deak@intel.com

drm: mark drm_of_component_match_add dummy inline

The newly added drm_of_component_match_add helper is defined as
'static' in a header when CONFIG_OF is disabled, causing a warning
each time the header is included:

In file included from /git/arm-soc/drivers/gpu/drm/bridge/dw-hdmi.c:23:0:
include/drm/drm_of.h:33:13: error: 'drm_of_component_match_add' defined but not used [-Werror=unused-function]

This marks it 'inline' like the other such helpers in this file.

Fixes: 97ac0e47aed5 ("drm: convert DT component matching to component_match_add_release()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161026085759.3875472-1-arnd@arndb.de

drm/bridge: add Silicon Image SiI8620 driver

SiI8620 transmitter converts eTMDS/HDMI signal to MHL 3.0.
It is controlled via I2C bus. Its interaction with other
devices in video pipeline is performed mainly on HW level.
The only interaction it does on device driver level is
filtering-out unsupported video modes, it exposes drm_bridge
interface to perform this operation.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1476085157-5266-1-git-send-email-a.hajda@samsung.com

dt-bindings: add Silicon Image SiI8620 bridge bindings

SiI8620 transmitter converts eTMDS/HDMI signal to MHL 3.0. It is controlled
via I2C bus.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1475823762-16237-3-git-send-email-a.hajda@samsung.com

video: add header file for Mobile High-Definition Link (MHL) interface

This header adds definitions specific to MHL protocol.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1475823762-16237-2-git-send-email-a.hajda@samsung.com

drm/amdgpu: add amdgpu_ttm_bo_eviction_valuable callback

This way we can correctly check split VRAM buffers as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: make eviction decision a driver callback v2

This way the driver can decide if it is valuable to evict a BO or not.

The current implementation is added as default to all existing drivers.

v2: fix some typos found during internal testing

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: fix coding style in ttm_bo_driver.h

A few 80chars issues and spaces at wrong places.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/pm: autoswitch power state when in balanced mode

The current default of always using the performance power state leads
to increased power consumption of mobile devices, which have a dedicated
battery power state. Switch between the performance and battery power
state automatically, dpending on the current AC power status, when the
user asked for the balanced power state.

The user can still override this logic by asking for the performance
or battery power state explicitly.

Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: fix spelling mistake and add KERN_WARNING to printks

Fix trivial spelling mistake cant't -> can't and add KERN_WARNING to
printk messages. Remove redundant spaces before \n too (thanks to
Joe Perches for spotting those).

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:new ids flag for preempt

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: mark symbols static where possible

We get 2 warnings when building kernel with W=1:
drivers/gpu/drm/amd/amdgpu/si.c:908:5: warning: no previous prototype for 'si_pciep_rreg' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/si.c:921:6: warning: no previous prototype for 'si_pciep_wreg' [-Wmissing-prototypes]

In fact, both functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
So this patch marks these functions with 'static'.

Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: change function declarations and add missing header dependencies

We get a few warnings when building kernel with W=1:
drivers/gpu/drm/amd/amdgpu/atombios_crtc.c:38:6: warning: no previous prototype for 'amdgpu_atombios_crtc_overscan_setup' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/dce_v8_0.c:661:6: warning: no previous prototype for 'dce_v8_0_disable_dce' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:40:5: warning: no previous prototype for 'amdgpu_gfx_scratch_get' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c:62:6: warning: no previous prototype for 'amdgpu_gfx_scratch_free' [-Wmissing-prototypes]
....

In fact, these functions are declared in
drivers/gpu/drm/amd/amdgpu/atombios_crtc.h
drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.h
drivers/gpu/drm/amd/amdgpu/dce_v8_0.h
drivers/gpu/drm/amd/amdgpu/dce_v10_0.h
drivers/gpu/drm/amd/amdgpu/dce_v11_0.h
drivers/gpu/drm/amd/powerplay/inc/pp_acpi.h.
So this patch adds missing header dependencies.

By the way, this patch changes declaration of amdgpu_gfx_parse_disable_cu()
to subject to its implement, and clean three function declarations
in pp_acpi.h up.

Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: s/amdgpuCrtc/amdgpu_crtc/ in pageflip code

Fix random CamelCase that has annoyed me for a while.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/atom: remove a bunch of unused functions

Leftovers from the radeon.

Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: consolidate atom scratch reg handling for hangs

Move from asic specific code to common atom code.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use amdgpu_bo_[create|free]_kernel for wb

Rather than open coding it.

Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add VCE VM session tracking

Fix the problems with killing VCE sessions in VM mode.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: improve parse_cs handling a bit

This way we can use parse_cs and still keep VM mode enabled.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: refine set power state logic for dpm.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update current ps/requeset ps in adev with real ps.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add an implement for check_power_state equal for KV

KV/KB/ML was missed these was implemented for other asics.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add an implement for check_power_state equal for Si.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add an implement for check_power_state equal for Cz.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add an implement for check_power_state equal for CI

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add new callback to check power state info

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: check min clock set by DAL before set ps.

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Put in rest of wave fields

Add the rest of the basic SQ WAVE fields to
finish off the implementation. Eventually,
a separate interface will be needed for GPRs.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: re-factor debugfs wave reader

Move IP version specific code into a callback.

Also add support for gfx7 devices.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Make debugfs write compliment read

Add PG lock support as well as bank selection to
the MMIO write function.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Allow broadcast on debugfs read (v2)

Allow any of the se/sh/instance fields to be
specified as a broadcast by submitting 0x3FF.

(v2) Fix broadcast range checking

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Fix debugfs wave reader

On non VI/CZ platforms it would not free
the grbm index lock.

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Add wave reader to debugfs

Currently supports CZ/VI. Allows nearly atomic read
of wave data from GPU.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: rework IP block registration (v2)

This makes it easier to replace specific IP blocks on
asics for handling virtual_dce, DAL, etc. and for building
IP lists for hw or tables. This also stored the status
information in the same structure.

v2: split out spelling fix into a separate patch
add a function to add IPs to the list

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: fix spelling in amdgpu_powerplay.h

and update a comment as well.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/virtual_dce: move define into source file

It's not used outside the file.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable virtual dce on SI

Add the proper IP module when requested.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fill in vce clock info ioctl query (v2)

Returns the vce clock table for the user mode driver.
The user mode driver can fill this data into vce clock
data packet for optimal VCE DPM.

v2: update to the new API

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: add an implementation for get_vce_clock_state (v3)

Used by the powerplay dpm code.

v2: update to the new API
v3: drop old include

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/dpm: add an implementation for get_vce_clock_state (v2)

Used by the non-powerplay dpm code.

v2: update to the new API

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/dpm: add new callback to fetch vce clock state (v2)

Will be used by the new info ioctl query.

v2: fetch a single state per request

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add info ioctl query for vce clock info (v3)

This is needed to set up the vce clock table in userspace
for proper VCE DPM.

v2: fix copy paste typo in comment
v3: track number of valid states

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: save number of vce states in dpm struct.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use same vce state definition in dpm and powerplay

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move dpm related definitions to amdgpu_dpm.h

No intended functional change.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move align_mask and nop into ring funcs as well (v2)

They are constant as well.

v2: update uvd and vce phys ring structures as well

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move the ring type into the funcs structure (v2)

It's constant, so it doesn't make to much sense to keep it
with the variable data.

v2: update vce and uvd phys mode ring structures as well

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move IB and frame size directly into the engine description

I should have suggested that on the initial patchset. This saves us a
few CPU cycles during CS and a bunch of loc.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove explicit NULL init for parse_cs

sed -i "/\.parse_cs = NULL,/d" drivers/gpu/drm/amd/amdgpu/*.c

That's just a leftover from radeon.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove 128 NOP hack from vm_flush v2

With the padding raised to 256 DW that shouldn't be needed any more.

v2: reduce estimation as well

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove ring type check for conditional execution

If a ring doesn't support that it shouldn't implement the function.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: pad gfx and compute rings to 256 dw

The same as on windows to avoid further problems with CE/DE
command submission overlaps.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: clarify why we evict vram twice on suspend

Update the comment to explain why we do this.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: clarify why we evict vram twice on suspend

Update the comment to explain why we do this.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: used cached gca values for vi_read_register (v2)

Using the cached values has less latency for bare metal
and SR-IOV, and prevents reading back bogus values if the
engine is powergated.

v2: fix typo in tile idx calculation

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx8: use cached raster config values in csb setup

Simplify the code and properly set the csb for harvest values.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx8: cache rb config values

Needed when for SR-IOV and when PG is enabled.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add additional cached gca config variables

We need to cache some additional values to handle SR-IOV
and PG.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use amdgpu_vm_get_pd_bo in the GEM code

Instead of messing with the PD directly.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move VM defines into amdgpu_vm.h

Only cleanup, no intended functional change.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move fence and ring defines into amdgpu_ring.h

Only cleanup, no intended functional change.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move sync handling into a separate header

Only cleanup, no intended functional change.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: stop using a bo list entry for the VM PTs

Saves us a bit of memory.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move PT validation back into VM code v2

Saves a bunch of CPU cycles when swapping things back in and
allows us to split the VM headers into a separate file.

v2: rename parameters

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove adev pointer from struct amdgpu_bo v2

It's completely pointless to have two pointers to the
device in the same structure.

v2: rename function to amdgpu_ttm_adev, fix typos

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Enable UVD PG on Tonga

Tested by reading tile/clk bits during load/idle.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Enable UVD powergating for SMU7

This patch enables detecting VCE/UVD PG features and fixes the
UVD powergate function.

Tested on a Tonga (by reading UVD tile/clk bits during playback/idle).

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update the shadow PD together with the real one v2

Far less CPU cycles needed for this approach.

v2: fix typo

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:wptr poll address of gfx8 is needed

for GFX8, gfx ring's wptr_addr is needed by SRIOV & CP for polling.

Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:properly fix some JumpTable issues

we found some MEC ucode leads to IB test fail or even
ring test fail if Jump Table of it is not start in
FW bo with page aligned address, fixed by always make
JT address page aligned.

we don't need to patch JT2 for MEC2, because for VI,
MEC2 is a copy of MEC1, thus when converting fw_type
for MEC_JT2 we just return MEC1,hw can use the same
JT for both MEC1 & MEC2.

above two change fixed some ring/ib test failure issue
for some version of MEC ucode.

Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:add MEC_STORAGE ucode id for sriov

for sriov, SMC need MEC_STORAGE reserved in fw bo.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Frank Min <frank.min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:add callback in cgs for sriov detect

Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:fw bo should be in VRAM for SRIOV

for GTT memory SMC can only access it within PF space, which is not
used for SRIOV case, thus for SRIOV case, we let SMC use FB space for
ucode bo.

Signed-off-by: Frank Min <frank.min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:keep bo pinned in prefered domain

Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:use smc_index_11 for VI

for VI smc, index_0 to index_8 are all not safe,
they may used by BIOS/FW, and index_11 is reserved
only for driver.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:add one more fiji device id

Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: mark symbols static where possible

We get a few warnings when building kernel with W=1:
drivers/gpu/drm/amd/amdgpu/../powerplay/smumgr/fiji_smumgr.c:162:5: warning: no previous prototype for 'fiji_setup_pwr_virus' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../powerplay/smumgr/fiji_smc.c:2052:5: warning: no previous prototype for 'fiji_program_mem_timing_parameters' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../powerplay/smumgr/polaris10_smumgr.c:175:5: warning: no previous prototype for 'polaris10_avfs_event_mgr' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/cz_hwmgr.c:69:10: warning: no previous prototype for 'cz_get_eclk_level' [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/smu7_hwmgr.c:92:26: warning: no previous prototype for 'cast_phw_smu7_power_state' [-Wmissing-prototypes]
....

In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
So this patch marks these functions with 'static'.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: mark symbols static where possible

We get 4 warnings when building kernel with W=1:
drivers/gpu/drm/radeon/si.c:7850:5: warning: no previous prototype for 'si_vce_send_vcepll_ctlreq' [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_dp_mst.c:226:21: warning: no previous prototype for 'radeon_mst_best_encoder' [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_dp_mst.c:344:26: warning: no previous prototype for 'radeon_mst_find_connector' [-Wmissing-prototypes]
drivers/gpu/drm/radeon/radeon_dp_mst.c:600:6: warning: no previous prototype for 'radeon_dp_mst_encoder_destroy' [-Wmissing-prototypes]

In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
So this patch marks these functions with 'static'.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: add missing header dependencies

We get a few warnings when building kernel with W=1:
drivers/gpu/drm/radeon/radeon_clocks.c:35:10: warning: no previous prototype for 'radeon_legacy_get_engine_clock' [-Wmissing-prototypes]
drivers/gpu/drm/radeon/atombios_encoders.c:75:1: warning: no previous prototype for 'atombios_get_backlight_level' [-Wmissing-prototypes]
drivers/gpu/drm/radeon/r600_cs.c:2268:5: warning: no previous prototype for 'r600_cs_parse' [-Wmissing-prototypes]
drivers/gpu/drm/radeon/evergreen_cs.c:2671:5: warning: no previous prototype for 'evergreen_cs_parse' [-Wmissing-prototypes]
....

In fact, these functions are declared
in drivers/gpu/drm/radeon/radeon_asic.h,
so this patch adds missing header dependencies.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: bump version for memory query info

Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: unify memory query info interface

Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add VRAM manager v2

Split VRAM allocations into 4MB blocks.

v2: fix typo in comment, some suggested cleanups
v3: document how to disable the feature, fix rebase issue

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable amdgpu_move_blit to handle multiple MM nodes v2

This allows us to move scattered buffers around.

v2: fix a couple of typos, handle scattered to scattered moves as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: handle multiple MM nodes in the VMs v2

This allows us to map scattered VRAM BOs to the VMs.

v2: fix offset handling, use pfn instead of offset,
fix PAGE_SIZE != AMDGPU_GPU_PAGE_SIZE case

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set at least the node size in the gtt manager

Otherwise the new VM code becomes confused.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>