review.tizen.org Git - platform/kernel/linux-exynos.git/log

nvme-pci: add a memory barrier to nvme_dbbuf_update_and_check_event

commit f1ed3df20d2d223e0852cc4ac1f19bba869a7e3c upstream.

In many architectures loads may be reordered with older stores to
different locations. In the nvme driver the following two operations
could be reordered:

- Write shadow doorbell (dbbuf_db) into memory.
- Read EventIdx (dbbuf_ei) from memory.

This can result in a potential race condition between driver and VM host
processing requests (if given virtual NVMe controller has a support for
shadow doorbell). If that occurs, then the NVMe controller may decide to
wait for MMIO doorbell from guest operating system, and guest driver may
decide not to issue MMIO doorbell on any of subsequent commands.

This issue is purely timing-dependent one, so there is no easy way to
reproduce it. Currently the easiest known approach is to run "Oracle IO
Numbers" (orion) that is shipped with Oracle DB:

orion -run advanced -num_large 0 -size_small 8 -type rand -simulate \
concat -write 40 -duration 120 -matrix row -testname nvme_test

Where nvme_test is a .lun file that contains a list of NVMe block
devices to run test against. Limiting number of vCPUs assigned to given
VM instance seems to increase chances for this bug to occur. On test
environment with VM that got 4 NVMe drives and 1 vCPU assigned the
virtual NVMe controller hang could be observed within 10-20 minutes.
That correspond to about 400-500k IO operations processed (or about
100GB of IO read/writes).

Orion tool was used as a validation and set to run in a loop for 36
hours (equivalent of pushing 550M IO operations). No issues were
observed. That suggest that the patch fixes the issue.

Fixes: f9f38e33389c ("nvme: improve performance for virtual NVMe devices")
Signed-off-by: Michal Wnukowski <wnukowski@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
[hch: updated changelog and comment a bit]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: reset error code in ext4_find_entry in fallback

commit f39b3f45dbcb0343822cce31ea7636ad66e60bc2 upstream.

When ext4_find_entry() falls back to "searching the old fashioned
way" due to a corrupt dx dir, it needs to reset the error code
to NULL so that the nonstandard ERR_BAD_DX_DIR code isn't returned
to userspace.

https://bugzilla.kernel.org/show_bug.cgi?id=199947

Reported-by: Anatoly Trosinenko <anatoly.trosinenko@yandex.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: sysfs: print ext4_super_block fields as little-endian

commit a4d2aadca184ece182418950d45ba4ffc7b652d2 upstream.

While working on extended rand for last_error/first_error timestamps,
I noticed that the endianess is wrong; we access the little-endian
fields in struct ext4_super_block as native-endian when we print them.

This adds a special case in ext4_attr_show() and ext4_attr_store()
to byteswap the superblock fields if needed.

In older kernels, this code was part of super.c, it got moved to
sysfs.c in linux-4.4.

Cc: stable@vger.kernel.org
Fixes: 52c198c6820f ("ext4: add sysfs entry showing whether the fs contains errors")
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: check for NUL characters in extended attribute's name

commit 7d95178c77014dbd8dce36ee40bbbc5e6c121ff5 upstream.

Extended attribute names are defined to be NUL-terminated, so the name
must not contain a NUL character. This is important because there are
places when remove extended attribute, the code uses strlen to
determine the length of the entry. That should probably be fixed at
some point, but code is currently really messy, so the simplest fix
for now is to simply validate that the extended attributes are sane.

https://bugzilla.kernel.org/show_bug.cgi?id=200401

Reported-by: Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stop_machine: Atomically queue and wake stopper threads

commit cfd355145c32bb7ccb65fccbe2d67280dc2119e1 upstream.

When cpu_stop_queue_work() releases the lock for the stopper
thread that was queued into its wake queue, preemption is
enabled, which leads to the following deadlock:

CPU0                              CPU1
sched_setaffinity(0, ...)
__set_cpus_allowed_ptr()
stop_one_cpu(0, ...)              stop_two_cpus(0, 1, ...)
cpu_stop_queue_work(0, ...)       cpu_stop_queue_two_works(0, ..., 1, ...)

-grabs lock for migration/0-
                                  -spins with preemption disabled,
                                   waiting for migration/0's lock to be
                                   released-

-adds work items for migration/0
and queues migration/0 to its
wake_q-

-releases lock for migration/0
and preemption is enabled-

-current thread is preempted,
and __set_cpus_allowed_ptr
has changed the thread's
cpu allowed mask to CPU1 only-

                                  -acquires migration/0 and migration/1's
                                   locks-

                                  -adds work for migration/0 but does not
                                   add migration/0 to wake_q, since it is
                                   already in a wake_q-

                                  -adds work for migration/1 and adds
                                   migration/1 to its wake_q-

                                  -releases migration/0 and migration/1's
                                   locks, wakes migration/1, and enables
                                   preemption-

                                  -since migration/1 is requested to run,
                                   migration/1 begins to run and waits on
                                   migration/0, but migration/0 will never
                                   be able to run, since the thread that
                                   can wake it is affine to CPU1-

Disable preemption in cpu_stop_queue_work() before queueing works for
stopper threads, and queueing the stopper thread in the wake queue, to
ensure that the operation of queueing the works and waking the stopper
threads is atomic.

Fixes: 0b26351b910f ("stop_machine, sched: Fix migrate_swap() vs. active_balance() deadlock")
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: peterz@infradead.org
Cc: matt@codeblueprint.co.uk
Cc: bigeasy@linutronix.de
Cc: gregkh@linuxfoundation.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1533329766-4856-1-git-send-email-isaacm@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-Developed-by: Isaac J. Manjarres <isaacm@codeaurora.org>

stop_machine: Reflow cpu_stop_queue_two_works()

commit b80a2bfce85e1051056d98d04ecb2d0b55cbbc1c upstream.

The code flow in cpu_stop_queue_two_works() is a little arcane; fix this by
lifting the preempt_disable() to the top to create more natural nesting wrt
the spinlocks and make the wake_up_q() and preempt_enable() unconditional
at the end.

Furthermore, enable preemption in the -EDEADLK case, such that we spin-wait
with preemption enabled.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: isaacm@codeaurora.org
Cc: matt@codeblueprint.co.uk
Cc: psodagud@codeaurora.org
Cc: gregkh@linuxfoundation.org
Cc: pkondeti@codeaurora.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180730112140.GH2494@hirez.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/kvm: fix deadlock when killed by oom

commit 306d6c49ac9ded11114cb53b0925da52f2c2ada1 upstream.

When the oom killer kills a userspace process in the page fault handler
while in guest context, the fault handler fails to release the mm_sem
if the FAULT_FLAG_RETRY_NOWAIT option is set. This leads to a deadlock
when tearing down the mm when the process terminates. This bug can only
happen when pfault is enabled, so only KVM clients are affected.

The problem arises in the rare cases in which handle_mm_fault does not
release the mm_sem. This patch fixes the issue by manually releasing
the mm_sem when needed.

Fixes: 24eb3a824c4f3 ("KVM: s390: Add FAULT_FLAG_RETRY_NOWAIT for guest fault")
Cc: <stable@vger.kernel.org> # 3.15+
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm/arm64: Skip updating PTE entry if no change

commit 976d34e2dab10ece5ea8fe7090b7692913f89084 upstream.

When there is contention on faulting in a particular page table entry
at stage 2, the break-before-make requirement of the architecture can
lead to additional refaulting due to TLB invalidation.

Avoid this by skipping a page table update if the new value of the PTE
matches the previous value.

Cc: stable@vger.kernel.org
Fixes: d5d8184d35c9 ("KVM: ARM: Memory virtualization setup")
Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm/arm64: Skip updating PMD entry if no change

commit 86658b819cd0a9aa584cd84453ed268a6f013770 upstream.

Contention on updating a PMD entry by a large number of vcpus can lead
to duplicate work when handling stage 2 page faults. As the page table
update follows the break-before-make requirement of the architecture,
it can lead to repeated refaults due to clearing the entry and
flushing the tlbs.

This problem is more likely when -

* there are large number of vcpus
* the mapping is large block mapping

such as when using PMD hugepages (512MB) with 64k pages.

Fix this by skipping the page table update if there is no change in
the entry being updated.

Cc: stable@vger.kernel.org
Fixes: ad361f093c1e ("KVM: ARM: Support hugetlbfs backed huge pages")
Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: rockchip: corrected uart1 clock-names for rk3328

commit d0414fdd58eb51ffd6528280fd66705123663964 upstream.

Corrected the uart clock-names or the uart driver might fail.

Fixes: 52e02d377a72 ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Huibin Hong <huibin.hong@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: mm: check for upper PAGE_SHIFT bits in pfn_valid()

commit 5ad356eabc47d26a92140a0c4b20eba471c10de3 upstream.

ARM64's pfn_valid() shifts away the upper PAGE_SHIFT bits of the input
before seeing if the PFN is valid.  This leads to false positives when
some of the upper bits are set, but the lower bits match a valid PFN.

For example, the following userspace code looks up a bogus entry in
/proc/kpageflags:

    int pagemap = open("/proc/self/pagemap", O_RDONLY);
    int pageflags = open("/proc/kpageflags", O_RDONLY);
    uint64_t pfn, val;

    lseek64(pagemap, [...], SEEK_SET);
    read(pagemap, &pfn, sizeof(pfn));
    if (pfn & (1UL << 63)) {        /* valid PFN */
        pfn &= ((1UL << 55) - 1);   /* clear flag bits */
        pfn |= (1UL << 55);
        lseek64(pageflags, pfn * sizeof(uint64_t), SEEK_SET);
        read(pageflags, &val, sizeof(val));
    }

On ARM64 this causes the userspace process to crash with SIGSEGV rather
than reading (1 << KPF_NOPAGE).  kpageflags_read() treats the offset as
valid, and stable_page_flags() will try to access an address between the
user and kernel address ranges.

Fixes: c1cc1552616d ("arm64: MMU initialisation")
Cc: stable@vger.kernel.org
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kprobes/arm64: Fix %p uses in error messages

commit 0722867dcbc28cc9b269b57acd847c7c1aa638d6 upstream.

Fix %p uses in error messages by removing it because
those are redundant or meaningless.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Howells <dhowells@redhat.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jon Medhurst <tixy@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tobin C . Harding <me@tobin.cc>
Cc: acme@kernel.org
Cc: akpm@linux-foundation.org
Cc: brueckner@linux.vnet.ibm.com
Cc: linux-arch@vger.kernel.org
Cc: rostedt@goodmis.org
Cc: schwidefsky@de.ibm.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/lkml/152491908405.9916.12425053035317241111.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

printk/nmi: Prevent deadlock when accessing the main log buffer in NMI

commit 03fc7f9c99c1e7ae2925d459e8487f1a6f199f79 upstream.

The commit 719f6a7040f1bdaf96 ("printk: Use the main logbuf in NMI
when logbuf_lock is available") brought back the possible deadlocks
in printk() and NMI.

The check of logbuf_lock is done only in printk_nmi_enter() to prevent
mixed output. But another CPU might take the lock later, enter NMI, and:

+ Both NMIs might be serialized by yet another lock, for example,
the one in nmi_cpu_backtrace().

+ The other CPU might get stopped in NMI, see smp_send_stop()
in panic().

The only safe solution is to use trylock when storing the message
into the main log-buffer. It might cause reordering when some lines
go to the main lock buffer directly and others are delayed via
the per-CPU buffer. It means that it is not useful in general.

This patch replaces the problematic NMI deferred context with NMI
direct context. It can be used to mark a code that might produce
many messages in NMI and the risk of losing them is more critical
than problems with eventual reordering.

The context is then used when dumping trace buffers on oops. It was
the primary motivation for the original fix. Also the reordering is
even smaller issue there because some traces have their own time stamps.

Finally, nmi_cpu_backtrace() need not longer be serialized because
it will always us the per-CPU buffers again.

Fixes: 719f6a7040f1bdaf96 ("printk: Use the main logbuf in NMI when logbuf_lock is available")
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180627142028.11259-1-pmladek@suse.com
To: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

printk: Create helper function to queue deferred console handling

commit a338f84dc196f44b63ba0863d2f34fd9b1613572 upstream.

It is just a preparation step. The patch does not change
the existing behavior.

Link: http://lkml.kernel.org/r/20180627140817.27764-3-pmladek@suse.com
To: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

printk: Split the code for storing a message into the log buffer

commit ba552399954dde1b388f7749fecad5c349216981 upstream.

It is just a preparation step. The patch does not change
the existing behavior.

Link: http://lkml.kernel.org/r/20180627140817.27764-2-pmladek@suse.com
To: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/arm-smmu: Error out only if not enough context interrupts

commit d1e20222d5372e951bbb2fd3f6489ec4a6ea9b11 upstream.

Currently we check if the number of context banks is not equal to
num_context_interrupts. However, there are booloaders such as, one
on sdm845 that reserves few context banks and thus kernel views
less than the total available context banks.
So, although the hardware definition in device tree would mention
the correct number of context interrupts, this number can be
greater than the number of context banks visible to smmu in kernel.
We should therefore error out only when the number of context banks
is greater than the available number of context interrupts.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Suggested-by: Tomasz Figa <tfiga@chromium.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[will: drop useless printk]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix btrfs_write_inode vs delayed iput deadlock

commit 3c4276936f6fbe52884b4ea4e6cc120b890a0f9f upstream.

We recently ran into the following deadlock involving
btrfs_write_inode():

[  +0.005066]  __schedule+0x38e/0x8c0
[  +0.007144]  schedule+0x36/0x80
[  +0.006447]  bit_wait+0x11/0x60
[  +0.006446]  __wait_on_bit+0xbe/0x110
[  +0.007487]  ? bit_wait_io+0x60/0x60
[  +0.007319]  __inode_wait_for_writeback+0x96/0xc0
[  +0.009568]  ? autoremove_wake_function+0x40/0x40
[  +0.009565]  inode_wait_for_writeback+0x21/0x30
[  +0.009224]  evict+0xb0/0x190
[  +0.006099]  iput+0x1a8/0x210
[  +0.006103]  btrfs_run_delayed_iputs+0x73/0xc0
[  +0.009047]  btrfs_commit_transaction+0x799/0x8c0
[  +0.009567]  btrfs_write_inode+0x81/0xb0
[  +0.008008]  __writeback_single_inode+0x267/0x320
[  +0.009569]  writeback_sb_inodes+0x25b/0x4e0
[  +0.008702]  wb_writeback+0x102/0x2d0
[  +0.007487]  wb_workfn+0xa4/0x310
[  +0.006794]  ? wb_workfn+0xa4/0x310
[  +0.007143]  process_one_work+0x150/0x410
[  +0.008179]  worker_thread+0x6d/0x520
[  +0.007490]  kthread+0x12c/0x160
[  +0.006620]  ? put_pwq_unlocked+0x80/0x80
[  +0.008185]  ? kthread_park+0xa0/0xa0
[  +0.007484]  ? do_syscall_64+0x53/0x150
[  +0.007837]  ret_from_fork+0x29/0x40

Writeback calls:

btrfs_write_inode
  btrfs_commit_transaction
    btrfs_run_delayed_iputs

If iput() is called on that same inode, evict() will wait for writeback
forever.

btrfs_write_inode() was originally added way back in 4730a4bc5bf3
("btrfs_dirty_inode") to support O_SYNC writes. However, ->write_inode()
hasn't been used for O_SYNC since 148f948ba877 ("vfs: Introduce new
helpers for syncing after writing to O_SYNC file or IS_SYNC inode"), so
btrfs_write_inode() is actually unnecessary (and leads to a bunch of
unnecessary commits). Get rid of it, which also gets rid of the
deadlock.

CC: stable@vger.kernel.org # 3.2+
Signed-off-by: Josef Bacik <jbacik@fb.com>
[Omar: new commit message]
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: don't leak ret from do_chunk_alloc

commit 4559b0a71749c442d34f7cfb9e72c9e58db83948 upstream.

If we're trying to make a data reservation and we have to allocate a
data chunk we could leak ret == 1, as do_chunk_alloc() will return 1 if
it allocated a chunk. Since the end of the function is the success path
just return 0.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: use correct compare function of dirty_metadata_bytes

commit d814a49198eafa6163698bdd93961302f3a877a4 upstream.

We use customized, nodesize batch value to update dirty_metadata_bytes.
We should also use batch version of compare function or we will easily
goto fast path and get false result from percpu_counter_compare().

Fixes: e2d845211eda ("Btrfs: use percpu counter for dirty metadata count")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Ethan Lien <ethanlien@synology.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: fill in statfs fsid and correct namelen

commit 21ba3845b59c733a79ed4fe1c4f3732e7ece9df7 upstream.

Fil in the correct namelen (typically 255 not 4096) in the
statfs response and also fill in a reasonably unique fsid
(in this case taken from the volume id, and the creation time
of the volume).

In the case of the POSIX statfs all fields are now filled in,
and in the case of non-POSIX mounts, all fields are filled
in which can be.

Signed-off-by: Steve French <stfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: don't request leases in symlink creation and query

commit 22783155f4bf956c346a81624ec9258930a6fe06 upstream.

Fixes problem pointed out by Pavel in discussions about commit
729c0c9dd55204f0c9a823ac8a7bfa83d36c7e78

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org> # 3.18.x+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: Do not send SMB3 SET_INFO if nothing changed

commit fd09b7d3b352105f08b8e02f7afecf7e816380ef upstream.

An earlier commit had a typo which prevented the
optimization from working:

commit 18dd8e1a65dd ("Do not send SMB3 SET_INFO request if nothing is changing")

Thank you to Metze for noticing this. Also clear a
reserved field in the FILE_BASIC_INFO struct we send
that should be zero (all the other fields in that
struct were set or cleared explicitly already in
cifs_set_file_info).

Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> # 4.9.x+
Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: enumerating snapshots was leaving part of the data off end

commit e02789a53d71334b067ad72eee5d4e88a0158083 upstream.

When enumerating snapshots, the last few bytes of the final
snapshot could be left off since we were miscalculating the
length returned (leaving off the sizeof struct SRV_SNAPSHOT_ARRAY)
See MS-SMB2 section 2.2.32.2. In addition fixup the length used
to allow smaller buffer to be passed in, in order to allow
returning the size of the whole snapshot array more easily.

Sample userspace output with a kernel patched with this
(mounted to a Windows volume with two snapshots).
Before this patch, the second snapshot would be missing a
few bytes at the end.

~/cifs-2.6# ~/enum-snapshots /mnt/file
press enter to issue the ioctl to retrieve snapshot information ...

size of snapshot array = 102
Num snapshots: 2 Num returned: 2 Array Size: 102

Snapshot 0:@GMT-2018.06.30-19.34.17
Snapshot 1:@GMT-2018.06.30-19.33.37

CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: check kmalloc before use

commit 126c97f4d0d1b5b956e8b0740c81a2b2a2ae548c upstream.

The kmalloc was not being checked - if it fails issue a warning
and return -ENOMEM to the caller.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: b8da344b74c8 ("cifs: dynamic allocation of ntlmssp blob")
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
cc: Stable <stable@vger.kernel.org>`
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: add missing debug entries for kconfig options

commit 950132afd59385caf6e2b84e5235d069fa10681d upstream.

/proc/fs/cifs/DebugData displays the features (Kconfig options)
used to build cifs.ko but it was missing some, and needed comma
separator. These can be useful in debugging certain problems
so we know which optional features were enabled in the user's build.
Also clarify them, by making them more closely match the
corresponding CONFIG_CIFS_* parm.

Old format:
Features: dfs fscache posix spnego xattr acl

New format:
Features: DFS,FSCACHE,SMB_DIRECT,STATS,DEBUG2,ALLOW_INSECURE_LEGACY,CIFS_POSIX,UPCALL(SPNEGO),XATTR,ACL

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: don't update offset in write

commit a103af1b64d74853a5e08ca6c86aeb0e5c6ca4f1 upstream.

MEI enables writes of complete messages only
while read can be performed in parts, hence
write should not update the file offset to
not break interleaving partial reads with writes.

Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/memory.c: check return value of ioremap_prot

[ Upstream commit 24eee1e4c47977bdfb71d6f15f6011e7b6188d04 ]

ioremap_prot() can return NULL which could lead to an oops.

Link: http://lkml.kernel.org/r/1533195441-58594-1-git-send-email-chenjie6@huawei.com
Signed-off-by: chen jie <chenjie6@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: chenjie <chenjie6@huawei.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: vmw_pvscsi: Return DID_RESET for status SAM_STAT_COMMAND_TERMINATED

[ Upstream commit e95153b64d03c2b6e8d62e51bdcc33fcad6e0856 ]

Commands that are reset are returned with status
SAM_STAT_COMMAND_TERMINATED. PVSCSI currently returns DID_OK |
SAM_STAT_COMMAND_TERMINATED which fails the command. Instead, set hostbyte
to DID_RESET to allow upper layers to retry.

Tested by copying a large file between two pvscsi disks on same adapter
while performing a bus reset at 1-second intervals. Before fix, commands
sometimes fail with DID_OK. After fix, commands observed to fail with
DID_RESET.

Signed-off-by: Jim Gill <jgill@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: fcoe: clear FC_RP_STARTED flags when receiving a LOGO

[ Upstream commit 1550ec458e0cf1a40a170ab1f4c46e3f52860f65 ]

When receiving a LOGO request we forget to clear the FC_RP_STARTED flag
before starting the rport delete routine.

As the started flag was not cleared, we're not deleting the rport but
waiting for a restart and thus are keeping the reference count of the rdata
object at 1.

This leads to the following kmemleak report:
unreferenced object 0xffff88006542aa00 (size 512):
  comm "kworker/0:2", pid 24, jiffies 4294899222 (age 226.880s)
  hex dump (first 32 bytes):
    68 96 fe 65 00 88 ff ff 00 00 00 00 00 00 00 00  h..e............
    01 00 00 00 08 00 00 00 02 c5 45 24 ac b8 00 10  ..........E$....
  backtrace:
    [<(____ptrval____)>] fcoe_ctlr_vn_add.isra.5+0x7f/0x770 [libfcoe]
    [<(____ptrval____)>] fcoe_ctlr_vn_recv+0x12af/0x27f0 [libfcoe]
    [<(____ptrval____)>] fcoe_ctlr_recv_work+0xd01/0x32f0 [libfcoe]
    [<(____ptrval____)>] process_one_work+0x7ff/0x1420
    [<(____ptrval____)>] worker_thread+0x87/0xef0
    [<(____ptrval____)>] kthread+0x2db/0x390
    [<(____ptrval____)>] ret_from_fork+0x35/0x40
    [<(____ptrval____)>] 0xffffffffffffffff

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: ard <ard@kwaak.net>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: fcoe: drop frames in ELS LOGO error path

[ Upstream commit 63d0e3dffda311e77b9a8c500d59084e960a824a ]

Drop the frames in the ELS LOGO error path instead of just returning an
error.

This fixes the following kmemleak report:
unreferenced object 0xffff880064cb1000 (size 424):
  comm "kworker/0:2", pid 24, jiffies 4294904293 (age 68.504s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<(____ptrval____)>] _fc_frame_alloc+0x2c/0x180 [libfc]
    [<(____ptrval____)>] fc_lport_enter_logo+0x106/0x360 [libfc]
    [<(____ptrval____)>] fc_fabric_logoff+0x8c/0xc0 [libfc]
    [<(____ptrval____)>] fcoe_if_destroy+0x79/0x3b0 [fcoe]
    [<(____ptrval____)>] fcoe_destroy_work+0xd2/0x170 [fcoe]
    [<(____ptrval____)>] process_one_work+0x7ff/0x1420
    [<(____ptrval____)>] worker_thread+0x87/0xef0
    [<(____ptrval____)>] kthread+0x2db/0x390
    [<(____ptrval____)>] ret_from_fork+0x35/0x40
    [<(____ptrval____)>] 0xffffffffffffffff

which can be triggered by issuing
echo eth0 > /sys/bus/fcoe/ctlr_destroy

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: fcoe: fix use-after-free in fcoe_ctlr_els_send

[ Upstream commit 2d7d4fd35e6e15b47c13c70368da83add19f01e7 ]

KASAN reports a use-after-free in fcoe_ctlr_els_send() when we're sending a
LOGO and have FIP debugging enabled. This is because we're first freeing
the skb and then printing the frame's DID. But the DID is a member of the
FC frame header which in turn is the skb's payload.

Exchange the debug print and kfree_skb() calls so we're not touching the
freed data.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpiolib-acpi: make sure we trigger edge events at least once on boot

[ Upstream commit ca876c7483b697b498868b1f575997191b077885 ]

On some systems using edge triggered ACPI Event Interrupts, the initial
state at boot is not setup by the firmware, instead relying on the edge
irq event handler running at least once to setup the initial state.

2 known examples of this are:

1) The Surface 3 has its _LID state controlled by an ACPI operation region
triggered by a GPIO event:

OperationRegion (GPOR, GeneralPurposeIo, Zero, One)
Field (GPOR, ByteAcc, NoLock, Preserve)
{
     Connection (
         GpioIo (Shared, PullNone, 0x0000, 0x0000, IoRestrictionNone,
             "\\_SB.GPO0", 0x00, ResourceConsumer, ,
             )
             {   // Pin list
                 0x004C
             }
     ),
     HELD,   1
}

Method (_E4C, 0, Serialized)  // _Exx: Edge-Triggered GPE
{
     If ((HELD == One))
     {
         ^^LID.LIDB = One
     }
     Else
     {
         ^^LID.LIDB = Zero
         Notify (LID, 0x80) // Status Change
     }

     Notify (^^PCI0.SPI1.NTRG, One) // Device Check
}

Currently, the state of LIDB is wrong until the user actually closes or
open the cover. We need to trigger the GPIO event once to update the
internal ACPI state.

Coincidentally, this also enables the Surface 2 integrated HID sensor hub
which also requires an ACPI gpio operation region to start initialization.

2) Various Bay Trail based tablets come with an external USB mux and
TI T1210B USB phy to enable USB gadget mode. The mux is controlled by a
GPIO which is controlled by an edge triggered ACPI Event Interrupt which
monitors the micro-USB ID pin.

When the tablet is connected to a PC (or no cable is plugged in), the ID
pin is high and the tablet should be in gadget mode. But the GPIO
controlling the mux is initialized by the firmware so that the USB data
lines are muxed to the host controller.

This means that if the user wants to use gadget mode, the user needs to
first plug in a host-cable to force the ID pin low and then unplug it
and connect the tablet to a PC, to get the ACPI event handler to run and
switch the mux to device mode,

This commit fixes both by running the event-handler once on boot.

Note that the running of the event-handler is done from a late_initcall,
this is done because the handler AML code may rely on OperationRegions
registered by other builtin drivers. This avoids errors like these:

[    0.133026] ACPI Error: No handler for Region [XSCG] ((____ptrval____)) [GenericSerialBus] (20180531/evregion-132)
[    0.133036] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20180531/exfldio-265)
[    0.133046] ACPI Error: Method parse/execution failed \_SB.GPO2._E12, AE_NOT_EXIST (20180531/psparse-516)

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
[hdegoede: Document BYT USB mux reliance on initial trigger]
[hdegoede: Run event handler from a late_initcall, rather then immediately]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memcg: remove memcg_cgroup::id from IDR on mem_cgroup_css_alloc() failure

[ Upstream commit 7e97de0b033bcac4fa9a35cef72e0c06e6a22c67 ]

In case of memcg_online_kmem() failure, memcg_cgroup::id remains hashed
in mem_cgroup_idr even after memcg memory is freed. This leads to leak
of ID in mem_cgroup_idr.

This patch adds removal into mem_cgroup_css_alloc(), which fixes the
problem. For better readability, it adds a generic helper which is used
in mem_cgroup_alloc() and mem_cgroup_id_put_many() as well.

Link: http://lkml.kernel.org/r/152354470916.22460.14397070748001974638.stgit@localhost.localdomain
Fixes 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure after many small jobs")
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: net: lmc: fix case value for target abort error

[ Upstream commit afb41bb039656f0cecb54eeb8b2e2088201295f5 ]

Current value for a target abort error is 0x010, however, this value
should in fact be 0x002. As it stands, the range of error is 0..7 so
it is currently never being detected. This bug has been in the driver
since the early 2.6.12 days (or before).

Detected by CoverityScan, CID#744290 ("Logically dead code")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Squashfs: Compute expected length from inode size rather than block length

[ Upstream commit a3f94cb99a854fa381fe7fadd97c4f61633717a5 ]

Previously in squashfs_readpage() when copying data into the page
cache, it used the length of the datablock read from the filesystem
(after decompression). However, if the filesystem has been corrupted
this data block may be short, which will leave pages unfilled.

The fix for this is to compute the expected number of bytes to copy
from the inode size, and use this to detect if the block is short.

Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Tested-by: Willy Tarreau <w@1wt.eu>
Cc: Анатолий Тросиненко <anatoly.trosinenko@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: delete historical BUG from zap_pmd_range()

[ Upstream commit 53406ed1bcfdabe4b5bc35e6d17946c6f9f563e2 ]

Delete the old VM_BUG_ON_VMA() from zap_pmd_range(), which asserted
that mmap_sem must be held when splitting an "anonymous" vma there.
Whether that's still strictly true nowadays is not entirely clear,
but the danger of sometimes crashing on the BUG is now fairly clear.

Even with the new stricter rules for anonymous vma marking, the
condition it checks for can possible trigger. Commit 44960f2a7b63
("staging: ashmem: Fix SIGBUS crash when traversing mmaped ashmem
pages") is good, and originally I thought it was safe from that
VM_BUG_ON_VMA(), because the /dev/ashmem fd exposed to the user is
disconnected from the vm_file in the vma, and madvise(,,MADV_REMOVE)
insists on VM_SHARED.

But after I read John's earlier mail, drawing attention to the
vfs_fallocate() in there: I may be wrong, and I don't know if Android
has THP in the config anyway, but it looks to me like an
unmap_mapping_range() from ashmem's vfs_fallocate() could hit precisely
the VM_BUG_ON_VMA(), once it's vma_is_anonymous().

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

squashfs metadata 2: electric boogaloo

[ Upstream commit cdbb65c4c7ead680ebe54f4f0d486e2847a500ea ]

Anatoly continues to find issues with fuzzed squashfs images.

This time, corrupt, missing, or undersized data for the page filling
wasn't checked for, because the squashfs_{copy,read}_cache() functions
did the squashfs_copy_data() call without checking the resulting data
size.

Which could result in the page cache pages being incompletely filled in,
and no error indication to the user space reading garbage data.

So make a helper function for the "fill in pages" case, because the
exact same incomplete sequence existed in two places.

[ I should have made a squashfs branch for these things, but I didn't
  intend to start doing them in the first place.

  My historical connection through cramfs is why I got into looking at
  these issues at all, and every time I (continue to) think it's a
  one-off.

  Because _this_ time is always the last time. Right?   - Linus ]

Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

enic: do not call enic_change_mtu in enic_probe

[ Upstream commit cb5c6568867325f9905e80c96531d963bec8e5ea ]

In commit ab123fe071c9 ("enic: handle mtu change for vf properly")
ASSERT_RTNL() is added to _enic_change_mtu() to prevent it from being
called without rtnl held. enic_probe() calls enic_change_mtu()
without rtnl held. At this point netdev is not registered yet.
Remove call to enic_change_mtu and assign the mtu to netdev->mtu.

Fixes: ab123fe071c9 ("enic: handle mtu change for vf properly")
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc: use asm-generic version of msi.h

[ Upstream commit 12be1036c536f849ad6f9bba73cffa708aa965c3 ]

This is necessary to be able to include <linux/msi.h> when
CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled. Without this, a build with
CONFIG_GENERIC_MSI_IRQ_DOMAIN fails with:

   In file included from drivers//ata/ahci.c:45:0:
>> include/linux/msi.h:226:10: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'?
             msi_alloc_info_t *arg);
             ^~~~~~~~~~~~~~~~
             sg_alloc_fn
   include/linux/msi.h:230:9: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'?
            msi_alloc_info_t *arg);
            ^~~~~~~~~~~~~~~~
            sg_alloc_fn
   include/linux/msi.h:239:12: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'?
               msi_alloc_info_t *arg);
               ^~~~~~~~~~~~~~~~
               sg_alloc_fn
   include/linux/msi.h:240:22: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'?
     void  (*msi_finish)(msi_alloc_info_t *arg, int retval);
                         ^~~~~~~~~~~~~~~~
                         sg_alloc_fn
   include/linux/msi.h:241:20: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'?
     void  (*set_desc)(msi_alloc_info_t *arg,
                       ^~~~~~~~~~~~~~~~
                       sg_alloc_fn
   include/linux/msi.h:316:18: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'?
           int nvec, msi_alloc_info_t *args);
                     ^~~~~~~~~~~~~~~~
                     sg_alloc_fn
   include/linux/msi.h:318:29: error: unknown type name 'msi_alloc_info_t'; did you mean 'sg_alloc_fn'?
            int virq, int nvec, msi_alloc_info_t *args);
                                ^~~~~~~~~~~~~~~~
                                sg_alloc_fn

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc/time: Add missing __init to init_tick_ops()

[ Upstream commit 6f57ed681ed817a4ec444e83f3aa2ad695d5ef34 ]

Code that was added to force gcc not to inline any function that isn't
explicitly declared as inline uncovered that init_tick_ops() isn't
marked as "__init". It is only called by __init functions and more
importantly it too calls an __init function which would require it to be
__init as well.

Link: http://lkml.kernel.org/r/201806060444.hdHcKOBy%fengguang.wu@intel.com
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arc: fix type warnings in arc/mm/cache.c

[ Upstream commit ec837d620c750c0d4996a907c8c4f7febe1bbeee ]

Fix type warnings in arch/arc/mm/cache.c.

../arch/arc/mm/cache.c: In function 'flush_anon_page':
../arch/arc/mm/cache.c:1062:55: warning: passing argument 2 of '__flush_dcache_page' makes integer from pointer without a cast [-Wint-conversion]
  __flush_dcache_page((phys_addr_t)page_address(page), page_address(page));
                                                       ^~~~~~~~~~~~~~~~~~
../arch/arc/mm/cache.c:1013:59: note: expected 'long unsigned int' but argument is of type 'void *'
void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr)
                                             ~~~~~~~~~~~~~~^~~~~

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: Elad Kanfi <eladkan@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Ofer Levi <oferle@mellanox.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arc: fix build errors in arc/include/asm/delay.h

[ Upstream commit 2423665ec53f2a29191b35382075e9834288a975 ]

Fix build errors in arch/arc/'s delay.h:
- add "extern unsigned long loops_per_jiffy;"
- add <asm-generic/types.h> for "u64"

In file included from ../drivers/infiniband/hw/cxgb3/cxio_hal.c:32:
../arch/arc/include/asm/delay.h: In function '__udelay':
../arch/arc/include/asm/delay.h:61:12: error: 'u64' undeclared (first use in this function)
  loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32;
            ^~~

In file included from ../drivers/infiniband/hw/cxgb3/cxio_hal.c:32:
../arch/arc/include/asm/delay.h: In function '__udelay':
../arch/arc/include/asm/delay.h:63:37: error: 'loops_per_jiffy' undeclared (first use in this function)
  loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32;
                                     ^~~~~~~~~~~~~~~

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: Elad Kanfi <eladkan@mellanox.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Cc: Ofer Levi <oferle@mellanox.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arc: [plat-eznps] fix printk warning in arc/plat-eznps/mtm.c

[ Upstream commit 9e2ea405543d9ddfe05b351f1679e53bd9c11f80 ]

Fix printk format warning in arch/arc/plat-eznps/mtm.c:

In file included from ../include/linux/printk.h:7,
                 from ../include/linux/kernel.h:14,
                 from ../include/linux/list.h:9,
                 from ../include/linux/smp.h:12,
                 from ../arch/arc/plat-eznps/mtm.c:17:
../arch/arc/plat-eznps/mtm.c: In function 'set_mtm_hs_ctr':
../include/linux/kern_levels.h:5:18: warning: format '%d' expects argument of type 'int', but argument 2 has type 'long int' [-Wformat=]
#define KERN_SOH "\001"  /* ASCII Start Of Header */
                  ^~~~~~
../include/linux/kern_levels.h:11:18: note: in expansion of macro 'KERN_SOH'
#define KERN_ERR KERN_SOH "3" /* error conditions */
                  ^~~~~~~~
../include/linux/printk.h:308:9: note: in expansion of macro 'KERN_ERR'
  printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
         ^~~~~~~~
../arch/arc/plat-eznps/mtm.c:166:3: note: in expansion of macro 'pr_err'
   pr_err("** Invalid @nps_mtm_hs_ctr [%d] needs to be [%d:%d] (incl)\n",
   ^~~~~~
../arch/arc/plat-eznps/mtm.c:166:40: note: format string is defined here
   pr_err("** Invalid @nps_mtm_hs_ctr [%d] needs to be [%d:%d] (incl)\n",
                                       ~^
                                       %ld
The hs_ctr variable can just be int instead of long, so also change
kstrtol() to kstrtoint() and leave the format string as %d.

Also add 2 header files since they are used in mtm.c and we prefer
not to depend on accidental/indirect #includes.

Cc: linux-snps-arc@lists.infradead.org
Cc: Ofer Levi <oferle@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arc: [plat-eznps] fix data type errors in platform headers

[ Upstream commit b1f32ce1c3d2c11959b7e6a2c58dc5197c581966 ]

Add <linux/types.h> to fix build errors.
Both ctop.h and <soc/nps/common.h> use u32 types and cause many
errors.

Examples:
../include/soc/nps/common.h:71:4: error: unknown type name 'u32'
    u32 __reserved:20, cluster:4, core:4, thread:4;
../include/soc/nps/common.h:76:3: error: unknown type name 'u32'
   u32 value;
../include/soc/nps/common.h:124:4: error: unknown type name 'u32'
    u32 base:8, cl_x:4, cl_y:4,
../include/soc/nps/common.h:127:3: error: unknown type name 'u32'
   u32 value;

../arch/arc/plat-eznps/include/plat/ctop.h:83:4: error: unknown type name 'u32'
    u32 gen:1, gdis:1, clk_gate_dis:1, asb:1,
../arch/arc/plat-eznps/include/plat/ctop.h:86:3: error: unknown type name 'u32'
   u32 value;
../arch/arc/plat-eznps/include/plat/ctop.h:93:4: error: unknown type name 'u32'
    u32 csa:22, dmsid:6, __reserved:3, cs:1;
../arch/arc/plat-eznps/include/plat/ctop.h:95:3: error: unknown type name 'u32'
   u32 value;

Cc: linux-snps-arc@lists.infradead.org
Cc: Ofer Levi <oferle@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: [plat-eznps] Add missing struct nps_host_reg_aux_dpc

[ Upstream commit 05b466bf846d2e8d2f0baf8dfd81a42cc933e237 ]

Fixing compilation issue caused by missing struct nps_host_reg_aux_dpc
definition.

Fixes: 3f9cd874dcc87 ("ARC: [plat-eznps] avoid toggling of DPC register")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Ofer Levi <oferle@mellanox.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

enic: handle mtu change for vf properly

[ Upstream commit ab123fe071c9aa9680ecd62eb080eb26cff4892c ]

When driver gets notification for mtu change, driver does not handle it for
all RQs. It handles only RQ[0].

Fix is to use enic_change_mtu() interface to change mtu for vf.

Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfp: flower: fix port metadata conversion bug

[ Upstream commit ee614c871014045b45fae149b7245fc22a0bbdd8 ]

Function nfp_flower_repr_get_type_and_port expects an enum nfp_repr_type
return value but, if the repr type is unknown, returns a value of type
enum nfp_flower_cmsg_port_type. This means that if FW encodes the port
ID in a way the driver does not understand instead of dropping the frame
driver may attribute it to a physical port (uplink) provided the port
number is less than physical port count.

Fix this and ensure a net_device of NULL is returned if the repr can not
be determined.

Fixes: 1025351a88a4 ("nfp: add flower app")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf: use GFP_ATOMIC instead of GFP_KERNEL in bpf_parse_prog()

[ Upstream commit 71eb5255f55bdb484d35ff7c9a1803f453dfbf82 ]

bpf_parse_prog() is protected by rcu_read_lock().
so that GFP_KERNEL is not allowed in the bpf_parse_prog().

[51015.579396] =============================
[51015.579418] WARNING: suspicious RCU usage
[51015.579444] 4.18.0-rc6+ #208 Not tainted
[51015.579464] -----------------------------
[51015.579488] ./include/linux/rcupdate.h:303 Illegal context switch in RCU read-side critical section!
[51015.579510] other info that might help us debug this:
[51015.579532] rcu_scheduler_active = 2, debug_locks = 1
[51015.579556] 2 locks held by ip/1861:
[51015.579577]  #0: 00000000a8c12fd1 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x2e0/0x910
[51015.579711]  #1: 00000000bf815f8e (rcu_read_lock){....}, at: lwtunnel_build_state+0x96/0x390
[51015.579842] stack backtrace:
[51015.579869] CPU: 0 PID: 1861 Comm: ip Not tainted 4.18.0-rc6+ #208
[51015.579891] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015
[51015.579911] Call Trace:
[51015.579950]  dump_stack+0x74/0xbb
[51015.580000]  ___might_sleep+0x16b/0x3a0
[51015.580047]  __kmalloc_track_caller+0x220/0x380
[51015.580077]  kmemdup+0x1c/0x40
[51015.580077]  bpf_parse_prog+0x10e/0x230
[51015.580164]  ? kasan_kmalloc+0xa0/0xd0
[51015.580164]  ? bpf_destroy_state+0x30/0x30
[51015.580164]  ? bpf_build_state+0xe2/0x3e0
[51015.580164]  bpf_build_state+0x1bb/0x3e0
[51015.580164]  ? bpf_parse_prog+0x230/0x230
[51015.580164]  ? lock_is_held_type+0x123/0x1a0
[51015.580164]  lwtunnel_build_state+0x1aa/0x390
[51015.580164]  fib_create_info+0x1579/0x33d0
[51015.580164]  ? sched_clock_local+0xe2/0x150
[51015.580164]  ? fib_info_update_nh_saddr+0x1f0/0x1f0
[51015.580164]  ? sched_clock_local+0xe2/0x150
[51015.580164]  fib_table_insert+0x201/0x1990
[51015.580164]  ? lock_downgrade+0x610/0x610
[51015.580164]  ? fib_table_lookup+0x1920/0x1920
[51015.580164]  ? lwtunnel_valid_encap_type.part.6+0xcb/0x3a0
[51015.580164]  ? rtm_to_fib_config+0x637/0xbd0
[51015.580164]  inet_rtm_newroute+0xed/0x1b0
[51015.580164]  ? rtm_to_fib_config+0xbd0/0xbd0
[51015.580164]  rtnetlink_rcv_msg+0x331/0x910
[ ... ]

Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: dma [non-IOC] setup SMP_CACHE_BYTES and cache_line_size

[ Upstream commit eb2777397fd83a4a7eaa26984d09d3babb845d2a ]

As for today we don't setup SMP_CACHE_BYTES and cache_line_size for
ARC, so they are set to L1_CACHE_BYTES by default. L1 line length
(L1_CACHE_BYTES) might be easily smaller than L2 line (which is
usually the case BTW). This breaks code.

For example this breaks ethernet infrastructure on HSDK/AXS103 boards
with IOC disabled, involving manual cache flushes
Functions which alloc and manage sk_buff packet data area rely on
SMP_CACHE_BYTES define. In the result we can share last L2 cache
line in sk_buff linear packet data area between DMA buffer and
some useful data in other structure. So we can lose this data when
we invalidate DMA buffer.

   sk_buff linear packet data area
                |
                |
                |         skb->end        skb->tail
                V            |                |
                             V                V
----------------------------------------------.
      packet data            | <tail padding> |  <useful data in other struct>
----------------------------------------------.

---------------------.--------------------------------------------------.
     SLC line        |             SLC (L2 cache) line (128B)           |
---------------------.--------------------------------------------------.
        ^                                     ^
        |                                     |
     These cache lines will be invalidated when we invalidate skb
     linear packet data area before DMA transaction starting.

This leads to issues painful to debug as it reproduces only if
(sk_buff->end - sk_buff->tail) < SLC_LINE_SIZE and
if we have some useful data right after sk_buff->end.

Fix that by hardcode SMP_CACHE_BYTES to max line length we may have.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "MIPS: BCM47XX: Enable 74K Core ExternalSync for PCIe erratum"

[ Upstream commit d5ea019f8a381f88545bb26993b62ec24a2796b7 ]

This reverts commit 2a027b47dba6 ("MIPS: BCM47XX: Enable 74K Core
ExternalSync for PCIe erratum").

Enabling ExternalSync caused a regression for BCM4718A1 (used e.g. in
Netgear E3000 and ASUS RT-N16): it simply hangs during PCIe
initialization. It's likely that BCM4717A1 is also affected.

I didn't notice that earlier as the only BCM47XX devices with PCIe I
own are:
1) BCM4706 with 2 x 14e4:4331
2) BCM4706 with 14e4:4360 and 14e4:4331
it appears that BCM4706 is unaffected.

While BCM5300X-ES300-RDS.pdf seems to document that erratum and its
workarounds (according to quotes provided by Tokunori) it seems not even
Broadcom follows them.

According to the provided info Broadcom should define CONF7_ES in their
SDK's mipsinc.h and implement workaround in the si_mips_init(). Checking
both didn't reveal such code. It *could* mean Broadcom also had some
problems with the given workaround.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Michael Marley <michael@michaelmarley.com>
Patchwork: https://patchwork.linux-mips.org/patch/20032/
URL: https://bugs.openwrt.org/index.php?do=details&task_id=1688
Cc: Tokunori Ikegami <ikegami@allied-telesis.co.jp>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/power turbostat: Read extended processor family from CPUID

[ Upstream commit 5aa3d1a20a233d4a5f1ec3d62da3f19d9afea682 ]

This fixes the reported family on modern AMD processors (e.g. Ryzen,
which is family 0x17). Previously these processors all showed up as
family 0xf.

See the document
https://support.amd.com/TechDocs/56255_OSRR.pdf
section CPUID_Fn00000001_EAX for how to calculate the family
from the BaseFamily and ExtFamily values.

This matches the code in arch/x86/lib/cpu.c

Signed-off-by: Calvin Walton <calvin.walton@kepstin.ca>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

zswap: re-check zswap_is_full() after do zswap_shrink()

[ Upstream commit 16e536ef47f567289a5699abee9ff7bb304bc12d ]

/sys/../zswap/stored_pages keeps rising in a zswap test with
"zswap.max_pool_percent=0" parameter.  But it should not compress or
store pages any more since there is no space in the compressed pool.

Reproduce steps:
  1. Boot kernel with "zswap.enabled=1"
  2. Set the max_pool_percent to 0
      # echo 0 > /sys/module/zswap/parameters/max_pool_percent
  3. Do memory stress test to see if some pages have been compressed
      # stress --vm 1 --vm-bytes $mem_available"M" --timeout 60s
  4. Watching the 'stored_pages' number increasing or not

The root cause is:

  When zswap_max_pool_percent is set to 0 via kernel parameter,
  zswap_is_full() will always return true due to zswap_shrink().  But if
  the shinking is able to reclain a page successfully the code then
  proceeds to compressing/storing another page, so the value of
  stored_pages will keep changing.

To solve the issue, this patch adds a zswap_is_full() check again after
  zswap_shrink() to make sure it's now under the max_pool_percent, and to
  not compress/store if we reached the limit.

Link: http://lkml.kernel.org/r/20180530103936.17812-1-liwang@redhat.com
Signed-off-by: Li Wang <liwang@redhat.com>
Acked-by: Dan Streetman <ddstreet@ieee.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Huang Ying <huang.ying.caritas@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipc/sem.c: prevent queue.status tearing in semop

[ Upstream commit f075faa300acc4f6301e348acde0a4580ed5f77c ]

In order for load/store tearing prevention to work, _all_ accesses to
the variable in question need to be done around READ and WRITE_ONCE()
macros. Ensure everyone does so for q->status variable for
semtimedop().

Link: http://lkml.kernel.org/r/20180717052654.676-1-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hinic: Link the logical network device to the pci device in sysfs

[ Upstream commit 7856e8616273098dc6c09a6e084afd98a283ff0d ]

Otherwise interfaces get exposed under /sys/devices/virtual, which
doesn't give udev the context it needs for PCI-based predictable
interface names.

Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/ftrace: Add snapshot and tracing_on test case

[ Upstream commit 82f4f3e69c5c29bce940dd87a2c0f16c51d48d17 ]

Add a testcase for checking snapshot and tracing_on
relationship. This ensures that the snapshotting doesn't
affect current tracing on/off settings.

Link: http://lkml.kernel.org/r/153149932412.11274.15289227592627901488.stgit@devbox
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Hiraku Toyooka <hiraku.toyooka@cybertrust.co.jp>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cachefiles: Wait rather than BUG'ing on "Unexpected object collision"

[ Upstream commit c2412ac45a8f8f1cd582723c1a139608694d410d ]

If we meet a conflicting object that is marked FSCACHE_OBJECT_IS_LIVE in
the active object tree, we have been emitting a BUG after logging
information about it and the new object.

Instead, we should wait for the CACHEFILES_OBJECT_ACTIVE flag to be cleared
on the old object (or return an error). The ACTIVE flag should be cleared
after it has been removed from the active object tree. A timeout of 60s is
used in the wait, so we shouldn't be able to get stuck there.

Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem")
Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cachefiles: Fix refcounting bug in backing-file read monitoring

[ Upstream commit 934140ab028713a61de8bca58c05332416d037d1 ]

cachefiles_read_waiter() has the right to access a 'monitor' object by
virtue of being called under the waitqueue lock for one of the pages in its
purview.  However, it has no ref on that monitor object or on the
associated operation.

What it is allowed to do is to move the monitor object to the operation's
to_do list, but once it drops the work_lock, it's actually no longer
permitted to access that object.  However, it is trying to enqueue the
retrieval operation for processing - but it can only do this via a pointer
in the monitor object, something it shouldn't be doing.

If it doesn't enqueue the operation, the operation may not get processed.
If the order is flipped so that the enqueue is first, then it's possible
for the work processor to look at the to_do list before the monitor is
enqueued upon it.

Fix this by getting a ref on the operation so that we can trust that it
will still be there once we've added the monitor to the to_do list and
dropped the work_lock.  The op can then be enqueued after the lock is
dropped.

The bug can manifest in one of a couple of ways.  The first manifestation
looks like:

FS-Cache:
FS-Cache: Assertion failed
FS-Cache: 6 == 5 is false
------------[ cut here ]------------
kernel BUG at fs/fscache/operation.c:494!
RIP: 0010:fscache_put_operation+0x1e3/0x1f0
...
fscache_op_work_func+0x26/0x50
process_one_work+0x131/0x290
worker_thread+0x45/0x360
kthread+0xf8/0x130
? create_worker+0x190/0x190
? kthread_cancel_work_sync+0x10/0x10
ret_from_fork+0x1f/0x30

This is due to the operation being in the DEAD state (6) rather than
INITIALISED, COMPLETE or CANCELLED (5) because it's already passed through
fscache_put_operation().

The bug can also manifest like the following:

kernel BUG at fs/fscache/operation.c:69!
...
    [exception RIP: fscache_enqueue_operation+246]
...
#7 [ffff883fff083c10] fscache_enqueue_operation at ffffffffa0b793c6
#8 [ffff883fff083c28] cachefiles_read_waiter at ffffffffa0b15a48
#9 [ffff883fff083c48] __wake_up_common at ffffffff810af028

I'm not entirely certain as to which is line 69 in Lei's kernel, so I'm not
entirely clear which assertion failed.

Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem")
Reported-by: Lei Xue <carmark.dlut@gmail.com>
Reported-by: Vegard Nossum <vegard.nossum@gmail.com>
Reported-by: Anthony DeRobertis <aderobertis@metrics.net>
Reported-by: NeilBrown <neilb@suse.com>
Reported-by: Daniel Axtens <dja@axtens.net>
Reported-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fscache: Allow cancelled operations to be enqueued

[ Upstream commit d0eb06afe712b7b103b6361f40a9a0c638524669 ]

Alter the state-check assertion in fscache_enqueue_operation() to allow
cancelled operations to be given processing time so they can be cleaned up.

Also fix a debugging statement that was requiring such operations to have
an object assigned.

Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem")
Reported-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/boot: Fix if_changed build flip/flop bug

[ Upstream commit 92a4728608a8fd228c572bc8ff50dd98aa0ddf2a ]

Dirk Gouders reported that two consecutive "make" invocations on an
already compiled tree will show alternating behaviors:

$ make
  CALL    scripts/checksyscalls.sh
  DESCEND  objtool
  CHK     include/generated/compile.h
  DATAREL arch/x86/boot/compressed/vmlinux
Kernel: arch/x86/boot/bzImage is ready  (#48)
  Building modules, stage 2.
  MODPOST 165 modules

$ make
  CALL    scripts/checksyscalls.sh
  DESCEND  objtool
  CHK     include/generated/compile.h
  LD      arch/x86/boot/compressed/vmlinux
  ZOFFSET arch/x86/boot/zoffset.h
  AS      arch/x86/boot/header.o
  LD      arch/x86/boot/setup.elf
  OBJCOPY arch/x86/boot/setup.bin
  OBJCOPY arch/x86/boot/vmlinux.bin
  BUILD   arch/x86/boot/bzImage
Setup is 15644 bytes (padded to 15872 bytes).
System is 6663 kB
CRC 3eb90f40
Kernel: arch/x86/boot/bzImage is ready  (#48)
  Building modules, stage 2.
  MODPOST 165 modules

He bisected it back to:

    commit 98f78525371b ("x86/boot: Refuse to build with data relocations")

The root cause was the use of the "if_changed" kbuild function multiple
times for the same target. It was designed to only be used once per
target, otherwise it will effectively always trigger, flipping back and
forth between the two commands getting recorded by "if_changed". Instead,
this patch merges the two commands into a single function to get stable
build artifacts (i.e. .vmlinux.cmd), and a single build behavior.

Bisected-and-Reported-by: Dirk Gouders <dirk@gouders.net>
Fix-Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180724230827.GA37823@beast
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/rt: Restore rt_runtime after disabling RT_RUNTIME_SHARE

[ Upstream commit f3d133ee0a17d5694c6f21873eec9863e11fa423 ]

NO_RT_RUNTIME_SHARE feature is used to prevent a CPU borrow enough
runtime with a spin-rt-task.

However, if RT_RUNTIME_SHARE feature is enabled and rt_rq has borrowd
enough rt_runtime at the beginning, rt_runtime can't be restored to
its initial bandwidth rt_runtime after we disable RT_RUNTIME_SHARE.

E.g. on my PC with 4 cores, procedure to reproduce:
1) Make sure  RT_RUNTIME_SHARE is enabled
cat /sys/kernel/debug/sched_features
  GENTLE_FAIR_SLEEPERS START_DEBIT NO_NEXT_BUDDY LAST_BUDDY
  CACHE_HOT_BUDDY WAKEUP_PREEMPTION NO_HRTICK NO_DOUBLE_TICK
  LB_BIAS NONTASK_CAPACITY TTWU_QUEUE NO_SIS_AVG_CPU SIS_PROP
  NO_WARN_DOUBLE_CLOCK RT_PUSH_IPI RT_RUNTIME_SHARE NO_LB_MIN
  ATTACH_AGE_LOAD WA_IDLE WA_WEIGHT WA_BIAS
2) Start a spin-rt-task
./loop_rr &
3) set affinity to the last cpu
taskset -p 8 $pid_of_loop_rr
4) Observe that last cpu have borrowed enough runtime.
cat /proc/sched_debug | grep rt_runtime
  .rt_runtime                    : 950.000000
  .rt_runtime                    : 900.000000
  .rt_runtime                    : 950.000000
  .rt_runtime                    : 1000.000000
5) Disable RT_RUNTIME_SHARE
echo NO_RT_RUNTIME_SHARE > /sys/kernel/debug/sched_features
6) Observe that rt_runtime can not been restored
cat /proc/sched_debug | grep rt_runtime
  .rt_runtime                    : 950.000000
  .rt_runtime                    : 900.000000
  .rt_runtime                    : 950.000000
  .rt_runtime                    : 1000.000000

This patch help to restore rt_runtime after we disable
RT_RUNTIME_SHARE.

Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn>
Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: zhong.weidong@zte.com.cn
Link: http://lkml.kernel.org/r/1531874815-39357-1-git-send-email-liu.hailong6@zte.com.cn
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c/mux, locking/core: Annotate the nested rt_mutex usage

[ Upstream commit 7b94ea50514d1a0dc94f02723b603c27bc0ea597 ]

If an i2c topology has instances of nested muxes, then a lockdep splat
is produced when when i2c_parent_lock_bus() is called.  Here is an
example:

  ============================================
  WARNING: possible recursive locking detected
  --------------------------------------------
  insmod/68159 is trying to acquire lock:
    (i2c_register_adapter#2){+.+.}, at: i2c_parent_lock_bus+0x32/0x50 [i2c_mux]

  but task is already holding lock:
    (i2c_register_adapter#2){+.+.}, at: i2c_parent_lock_bus+0x32/0x50 [i2c_mux]

  other info that might help us debug this:
    Possible unsafe locking scenario:

          CPU0
          ----
     lock(i2c_register_adapter#2);
     lock(i2c_register_adapter#2);

    *** DEADLOCK ***

    May be due to missing lock nesting notation

  1 lock held by insmod/68159:
    #0:  (i2c_register_adapter#2){+.+.}, at: i2c_parent_lock_bus+0x32/0x50 [i2c_mux]

  stack backtrace:
  CPU: 13 PID: 68159 Comm: insmod Tainted: G           O
  Call Trace:
    dump_stack+0x67/0x98
    __lock_acquire+0x162e/0x1780
    lock_acquire+0xba/0x200
    rt_mutex_lock+0x44/0x60
    i2c_parent_lock_bus+0x32/0x50 [i2c_mux]
    i2c_parent_lock_bus+0x3e/0x50 [i2c_mux]
    i2c_smbus_xfer+0xf0/0x700
    i2c_smbus_read_byte+0x42/0x70
    my2c_init+0xa2/0x1000 [my2c]
    do_one_initcall+0x51/0x192
    do_init_module+0x62/0x216
    load_module+0x20f9/0x2b50
    SYSC_init_module+0x19a/0x1c0
    SyS_init_module+0xe/0x10
    do_syscall_64+0x6c/0x1a0
    entry_SYSCALL_64_after_hwframe+0x42/0xb7

Reported-by: John Sperbeck <jsperbeck@google.com>
Tested-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Deepa Dinamani <deepadinamani@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Chang <dpf@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Link: http://lkml.kernel.org/r/20180720083914.1950-3-peda@axentia.se
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

locking/rtmutex: Allow specifying a subclass for nested locking

[ Upstream commit 62cedf3e60af03e47849fe2bd6a03ec179422a8a ]

Needed for annotating rt_mutex locks.

Tested-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Deepa Dinamani <deepadinamani@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Chang <dpf@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Link: http://lkml.kernel.org/r/20180720083914.1950-2-peda@axentia.se
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: axienet: Fix double deregister of mdio

[ Upstream commit 03bc7cab7d7218088412a75e141696a89059ab00 ]

If the registration fails then mdio_unregister is called.
However at unbind the unregister ia attempted again resulting
in the below crash

[   73.544038] kernel BUG at drivers/net/phy/mdio_bus.c:415!
[   73.549362] Internal error: Oops - BUG: 0 [#1] SMP
[   73.554127] Modules linked in:
[   73.557168] CPU: 0 PID: 2249 Comm: sh Not tainted 4.14.0 #183
[   73.562895] Hardware name: xlnx,zynqmp (DT)
[   73.567062] task: ffffffc879e41180 task.stack: ffffff800cbe0000
[   73.572973] PC is at mdiobus_unregister+0x84/0x88
[   73.577656] LR is at axienet_mdio_teardown+0x18/0x30
[   73.582601] pc : [<ffffff80085fa4cc>] lr : [<ffffff8008616858>]
pstate: 20000145
[   73.589981] sp : ffffff800cbe3c30
[   73.593277] x29: ffffff800cbe3c30 x28: ffffffc879e41180
[   73.598573] x27: ffffff8008a21000 x26: 0000000000000040
[   73.603868] x25: 0000000000000124 x24: ffffffc879efe920
[   73.609164] x23: 0000000000000060 x22: ffffffc879e02000
[   73.614459] x21: ffffffc879e02800 x20: ffffffc87b0b8870
[   73.619754] x19: ffffffc879e02800 x18: 000000000000025d
[   73.625050] x17: 0000007f9a719ad0 x16: ffffff8008195bd8
[   73.630345] x15: 0000007f9a6b3d00 x14: 0000000000000010
[   73.635640] x13: 74656e7265687465 x12: 0000000000000030
[   73.640935] x11: 0000000000000030 x10: 0101010101010101
[   73.646231] x9 : 241f394f42533300 x8 : ffffffc8799f6e98
[   73.651526] x7 : ffffffc8799f6f18 x6 : ffffffc87b0ba318
[   73.656822] x5 : ffffffc87b0ba498 x4 : 0000000000000000
[   73.662117] x3 : 0000000000000000 x2 : 0000000000000008
[   73.667412] x1 : 0000000000000004 x0 : ffffffc8799f4000
[   73.672708] Process sh (pid: 2249, stack limit = 0xffffff800cbe0000)

Fix the same by making the bus NULL on unregister.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qmi_wwan: fix interface number for DW5821e production firmware

[ Upstream commit f25e1392fdb556290957142ac2da33a02cbff403 ]

The original mapping for the DW5821e was done using a development
version of the firmware. Confirmed with the vendor that the final
USB layout ends up exposing the QMI control/data ports in USB
config #1, interface #0, not in interface #1 (which is now a HID
interface).

T:  Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  2
P:  Vendor=413c ProdID=81d7 Rev=03.18
S:  Manufacturer=DELL
S:  Product=DW5821e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

Fixes: e7e197edd09c25 ("qmi_wwan: add support for the Dell Wireless 5821e module")
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnx2x: Fix invalid memory access in rss hash config path.

[ Upstream commit ae2dcb28c24794a87e424a726a1cf1a61980f52d ]

Rx hash/filter table configuration uses rss_conf_obj to configure filters
in the hardware. This object is initialized only when the interface is
brought up.
This patch adds driver changes to configure rss params only when the device
is in opened state. In port disabled case, the config will be cached in the
driver structure which will be applied in the successive load path.

Please consider applying it to 'net' branch.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: staging: omap4iss: Include asm/cacheflush.h after generic includes

[ Upstream commit 0894da849f145af51bde88a6b84f95b9c9e0bc66 ]

Including asm/cacheflush.h first results in the following build error
when trying to build sparc32:allmodconfig, because 'struct page' has not
been declared, and the function declaration ends up creating a separate
(private) declaration of struct page (as a result of function arguments
being in the scope of the function declaration and definition, not in
global scope).

The C scoping rules do not just affect variable visibility, they also
affect type declaration visibility.

The end result is that when the actual call site is seen in
<linux/highmem.h>, the 'struct page' type in the caller is not the same
'struct page' that the function was declared with, resulting in:

  In file included from arch/sparc/include/asm/page.h:10:0,
                   ...
                   from drivers/staging/media/omap4iss/iss_video.c:15:
  include/linux/highmem.h: In function 'clear_user_highpage':
  include/linux/highmem.h:137:31: error:
passing argument 1 of 'sparc_flush_page_to_ram' from incompatible
pointer type

Include generic includes files first to fix the problem.

Fixes: fc96d58c10162 ("[media] v4l: omap4iss: Add support for OMAP4 camera interface - Video devices")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[ Added explanation of C scope rules - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/x86/amd/ibs: Don't access non-started event

[ Upstream commit d2753e6b4882a637a0e8fb3b9c2e15f33265300e ]

Paul Menzel reported the following bug:

> Enabling the undefined behavior sanitizer and building GNU/Linux 4.18-rc5+
> (with some unrelated commits) with GCC 8.1.0 from Debian Sid/unstable, the
> warning below is shown.
>
> > [    2.111913]
> > ================================================================================
> > [    2.111917] UBSAN: Undefined behaviour in arch/x86/events/amd/ibs.c:582:24
> > [    2.111919] member access within null pointer of type 'struct perf_event'
> > [    2.111926] CPU: 0 PID: 144 Comm: udevadm Not tainted 4.18.0-rc5-00316-g4864b68cedf2 #104
> > [    2.111928] Hardware name: ASROCK E350M1/E350M1, BIOS TIMELESS 01/01/1970
> > [    2.111930] Call Trace:
> > [    2.111943]  dump_stack+0x55/0x89
> > [    2.111949]  ubsan_epilogue+0xb/0x33
> > [    2.111953]  handle_null_ptr_deref+0x7f/0x90
> > [    2.111958]  __ubsan_handle_type_mismatch_v1+0x55/0x60
> > [    2.111964]  perf_ibs_handle_irq+0x596/0x620

The code dereferences event before checking the STARTED bit. Patch
below should cure the issue.

The warning should not trigger, if I analyzed the thing correctly.
(And Paul's testing confirms this.)

Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Menzel <pmenzel+linux-x86@molgen.mpg.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1807200958390.1580@nanos.tec.linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: davinci: Avoid zero value of CLKH

[ Upstream commit cc8de9a68599b261244ea453b38678229f06ada7 ]

If CLKH is set to 0 I2C clock is not generated at all, so avoid this value
and stretch the clock in this case.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: m_can: Move accessing of message ram to after clocks are enabled

[ Upstream commit 54e4a0c486041dc1c20593d997fafd67089e8408 ]

MCAN message ram should only be accessed once clocks are enabled.
Therefore, move the call to parse/init the message ram to after
clocks are enabled.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: mpc5xxx_can: check of_iomap return before use

[ Upstream commit b5c1a23b17e563b656cc9bb76ce5323b997d90e8 ]

of_iomap() can return NULL so that return needs to be checked and NULL
treated as failure. While at it also take care of the missing
of_node_put() in the error path.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: commit afa17a500a36 ("net/can: add driver for mscan family & mpc52xx_mscan")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: prevent ISA drivers from building on PPC32

[ Upstream commit c9ce1fa1c24b08e13c2a3b5b1f94a19c9eaa982c ]

Prevent drivers from building on PPC32 if they use isa_bus_to_virt(),
isa_virt_to_bus(), or isa_page_to_bus(), which are not available and
thus cause build errors.

../drivers/net/ethernet/3com/3c515.c: In function 'corkscrew_open':
../drivers/net/ethernet/3com/3c515.c:824:9: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration]

../drivers/net/ethernet/amd/lance.c: In function 'lance_rx':
../drivers/net/ethernet/amd/lance.c:1203:23: error: implicit declaration of function 'isa_bus_to_virt'; did you mean 'bus_to_virt'? [-Werror=implicit-function-declaration]

../drivers/net/ethernet/amd/ni65.c: In function 'ni65_init_lance':
../drivers/net/ethernet/amd/ni65.c:585:20: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration]

../drivers/net/ethernet/cirrus/cs89x0.c: In function 'net_open':
../drivers/net/ethernet/cirrus/cs89x0.c:897:20: error: implicit declaration of function 'isa_virt_to_bus'; did you mean 'virt_to_bus'? [-Werror=implicit-function-declaration]

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

atl1c: reserve min skb headroom

[ Upstream commit 6e56830776828d8ca9897fc4429eeab47c3bb432 ]

Got crash report with following backtrace:
BUG: unable to handle kernel paging request at ffff8801869daffe
RIP: 0010:[<ffffffff816429c4>]  [<ffffffff816429c4>] ip6_finish_output2+0x394/0x4c0
RSP: 0018:ffff880186c83a98  EFLAGS: 00010283
RAX: ffff8801869db00e ...
  [<ffffffff81644cdc>] ip6_finish_output+0x8c/0xf0
  [<ffffffff81644d97>] ip6_output+0x57/0x100
  [<ffffffff81643dc9>] ip6_forward+0x4b9/0x840
  [<ffffffff81645566>] ip6_rcv_finish+0x66/0xc0
  [<ffffffff81645db9>] ipv6_rcv+0x319/0x530
  [<ffffffff815892ac>] netif_receive_skb+0x1c/0x70
  [<ffffffffc0060bec>] atl1c_clean+0x1ec/0x310 [atl1c]
  ...

The bad access is in neigh_hh_output(), at skb->data - 16 (HH_DATA_MOD).
atl1c driver provided skb with no headroom, so 14 bytes (ethernet
header) got pulled, but then 16 are copied.

Reserve NET_SKB_PAD bytes headroom, like netdev_alloc_skb().

Compile tested only; I lack hardware.

Fixes: 7b7017642199 ("atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qed: Correct Multicast API to reflect existence of 256 approximate buckets.

[ Upstream commit 25c020a90919632b3425c19dc09188d56b9ed59a ]

FW hsi contains 256 approximation buckets which are split in ramrod into
eight u32 values, but driver is using eight 'unsigned long' variables.

This patch fixes the mcast logic by making the API utilize u32.

Fixes: 83aeb933 ("qed*: Trivial modifications")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qed: Fix possible race for the link state value.

[ Upstream commit 58874c7b246109d8efb2b0099d1aa296d6bfc3fa ]

There's a possible race where driver can read link status in mid-transition
and see that virtual-link is up yet speed is 0. Since in this
mid-transition we're guaranteed to see a mailbox from MFW soon, we can
afford to treat this as link down.

Fixes: cc875c2e ("qed: Add link support")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qed: Fix link flap issue due to mismatching EEE capabilities.

[ Upstream commit 4ad95a93a702ec4f4fb5159b822797ba67b8cbbe ]

Apparently, MFW publishes EEE capabilities even for Fiber-boards that don't
support them, and later since qed internally sets adv_caps it would cause
link-flap avoidance (LFA) to fail when driver would initiate the link.
This in turn delays the link, causing traffic to fail.

Driver has been modified to not to ask MFW for any EEE config if EEE isn't
to be enabled.

Fixes: 645874e5 ("qed: Add support for Energy efficient ethernet.")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: caif: Add a missing rcu_read_unlock() in caif_flow_cb

[ Upstream commit 64119e05f7b31e83e2555f6782e6cdc8f81c63f4 ]

Add a missing rcu_read_unlock in the error path

Fixes: c95567c80352 ("caif: added check for potential null return")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/power turbostat: fix -S on UP systems

[ Upstream commit 9d83601a9cc1884d1b5706ee2acc661d558c6838 ]

The -S (system summary) option failed to print any data on a 1-processor system.

Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: vmx: use local variable for current_vmptr when emulating VMPTRST

[ Upstream commit 0a06d4256674c4e041945b52044941995fee237d ]

Do not expose the address of vmx->nested.current_vmptr to
kvm_write_guest_virt_system() as the resulting __copy_to_user()
call will trigger a WARN when CONFIG_HARDENED_USERCOPY is
enabled.

Opportunistically clean up variable names in handle_vmptrst()
to improve readability, e.g. vmcs_gva is misleading as the
memory operand of VMPTRST is plain memory, not a VMCS.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Tested-by: Peter Shier <pshier@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: don't allow to rename to already-pending name

[ Upstream commit c6cc94df65c3174be92afbee638f11cbb5e606a7 ]

Its possible to rename two chains to the same name in one
transaction:

nft add chain t c1
nft add chain t c2
nft 'rename chain t c1 c3;rename chain t c2 c3'

This creates two chains named 'c3'.

Appears to be harmless, both chains can still be deleted both
by name or handle, but, nevertheless, its a bug.

Walk transaction log and also compare vs. the pending renames.

Both chains can still be deleted, but nevertheless it is a bug as
we don't allow to create chains with identical names, so we should
prevent this from happening-by-rename too.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: fix memory leaks on chain rename

[ Upstream commit 9f8aac0be21ed5f99bd5ba0ff315d710737d1794 ]

The new name is stored in the transaction metadata, on commit,
the pointers to the old and new names are swapped.

Therefore in abort and commit case we have to free the
pointer in the chain_trans container.

In commit case, the pointer can be used by another cpu that
is currently dumping the renamed chain, thus kfree needs to
happen after waiting for rcu readers to complete.

Fixes: b7263e071a ("netfilter: nf_tables: Allow chain name of up to 255 chars")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf, ppc64: fix unexpected r0=0 exit path inside bpf_xadd

[ Upstream commit b9c1e60e7bf4e64ac1b4f4d6d593f0bb57886973 ]

None of the JITs is allowed to implement exit paths from the BPF
insn mappings other than BPF_JMP | BPF_EXIT. In the BPF core code
we have a couple of rewrites in eBPF (e.g. LD_ABS / LD_IND) and
in eBPF to cBPF translation to retain old existing behavior where
exceptions may occur; they are also tightly controlled by the
verifier where it disallows some of the features such as BPF to
BPF calls when legacy LD_ABS / LD_IND ops are present in the BPF
program. During recent review of all BPF_XADD JIT implementations
I noticed that the ppc64 one is buggy in that it contains two
jumps to exit paths. This is problematic as this can bypass verifier
expectations e.g. pointed out in commit f6b1b3bf0d5f ("bpf: fix
subprog verifier bypass by div/mod by 0 exception"). The first
exit path is obsoleted by the fix in ca36960211eb ("bpf: allow xadd
only on aligned memory") anyway, and for the second one we need to
do a fetch, add and store loop if the reservation from lwarx/ldarx
was lost in the meantime.

Fixes: 156d0e290e96 ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Tested-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_set_hash: add rcu_barrier() in the nft_rhash_destroy()

[ Upstream commit 9970a8e40d4c39e23d62d32540366d1d7d2cce9b ]

GC of set uses call_rcu() to destroy elements.
So that elements would be destroyed after destroying sets and chains.
But, elements should be destroyed before destroying sets and chains.
In order to wait calling call_rcu(), a rcu_barrier() is added.

In order to test correctly, below patch should be applied.
https://patchwork.ozlabs.org/patch/940883/

test scripts:
   %cat test.nft
   table ip aa {
   map map1 {
   type ipv4_addr : verdict; flags timeout;
   elements = {
   0 : jump a0,
   1 : jump a0,
   2 : jump a0,
   3 : jump a0,
   4 : jump a0,
   5 : jump a0,
   6 : jump a0,
   7 : jump a0,
   8 : jump a0,
   9 : jump a0,
   }
   timeout 1s;
   }
   chain a0 {
   }
   }
   flush ruleset

   [ ... ]

   table ip aa {
   map map1 {
   type ipv4_addr : verdict; flags timeout;
   elements = {
   0 : jump a0,
   1 : jump a0,
   2 : jump a0,
   3 : jump a0,
   4 : jump a0,
   5 : jump a0,
   6 : jump a0,
   7 : jump a0,
   8 : jump a0,
   9 : jump a0,
   }
   timeout 1s;
   }
   chain a0 {
   }
   }
   flush ruleset

Splat looks like:
[  200.795603] kernel BUG at net/netfilter/nf_tables_api.c:1363!
[  200.806944] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  200.812253] CPU: 1 PID: 1582 Comm: nft Not tainted 4.17.0+ #24
[  200.820297] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015
[  200.830309] RIP: 0010:nf_tables_chain_destroy.isra.34+0x62/0x240 [nf_tables]
[  200.838317] Code: 43 50 85 c0 74 26 48 8b 45 00 48 8b 4d 08 ba 54 05 00 00 48 c7 c6 60 6d 29 c0 48 c7 c7 c0 65 29 c0
4c 8b 40 08 e8 58 e5 fd f8 <0f> 0b 48 89 da 48 b8 00 00 00 00 00 fc ff
[  200.860366] RSP: 0000:ffff880118dbf4d0 EFLAGS: 00010282
[  200.866354] RAX: 0000000000000061 RBX: ffff88010cdeaf08 RCX: 0000000000000000
[  200.874355] RDX: 0000000000000061 RSI: 0000000000000008 RDI: ffffed00231b7e90
[  200.882361] RBP: ffff880118dbf4e8 R08: ffffed002373bcfb R09: ffffed002373bcfa
[  200.890354] R10: 0000000000000000 R11: ffffed002373bcfb R12: dead000000000200
[  200.898356] R13: dead000000000100 R14: ffffffffbb62af38 R15: dffffc0000000000
[  200.906354] FS:  00007fefc31fd700(0000) GS:ffff88011b800000(0000) knlGS:0000000000000000
[  200.915533] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  200.922355] CR2: 0000557f1c8e9128 CR3: 0000000106880000 CR4: 00000000001006e0
[  200.930353] Call Trace:
[  200.932351]  ? nf_tables_commit+0x26f6/0x2c60 [nf_tables]
[  200.939525]  ? nf_tables_setelem_notify.constprop.49+0x1a0/0x1a0 [nf_tables]
[  200.947525]  ? nf_tables_delchain+0x6e0/0x6e0 [nf_tables]
[  200.952383]  ? nft_add_set_elem+0x1700/0x1700 [nf_tables]
[  200.959532]  ? nla_parse+0xab/0x230
[  200.963529]  ? nfnetlink_rcv_batch+0xd06/0x10d0 [nfnetlink]
[  200.968384]  ? nfnetlink_net_init+0x130/0x130 [nfnetlink]
[  200.975525]  ? debug_show_all_locks+0x290/0x290
[  200.980363]  ? debug_show_all_locks+0x290/0x290
[  200.986356]  ? sched_clock_cpu+0x132/0x170
[  200.990352]  ? find_held_lock+0x39/0x1b0
[  200.994355]  ? sched_clock_local+0x10d/0x130
[  200.999531]  ? memset+0x1f/0x40

Fixes: 9d0982927e79 ("netfilter: nft_hash: add support for timeouts")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_uac2: fix endianness of 'struct cntrl_*_lay3'

[ Upstream commit eec24f2a0d4dc3b1d95a3ccd2feb523ede3ba775 ]

The list [1] of commits doing endianness fixes in USB subsystem is long
due to below quote from USB spec Revision 2.0 from April 27, 2000:

------------
8.1 Byte/Bit Ordering

Multiple byte fields in standard descriptors, requests, and responses
are interpreted as and moved over the bus in little-endian order, i.e.
LSB to MSB.
------------

This commit belongs to the same family.

[1] Example of endianness fixes in USB subsystem:
commit 14e1d56cbea6 ("usb: gadget: f_uac2: endianness fixes.")
commit 42370b821168 ("usb: gadget: f_uac1: endianness fixes.")
commit 63afd5cc7877 ("USB: chaoskey: fix Alea quirk on big-endian hosts")
commit 74098c4ac782 ("usb: gadget: acm: fix endianness in notifications")
commit cdd7928df0d2 ("ACM gadget: fix endianness in notifications")
commit 323ece54e076 ("cdc-wdm: fix endianness bug in debug statements")
commit e102609f1072 ("usb: gadget: uvc: Fix endianness mismatches")
list goes on

Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools: usb: ffs-test: Fix build on big endian systems

[ Upstream commit a2b22dddc7bb6110ac3b5ed1a60aa9279836fadb ]

The tools/usb/ffs-test.c file defines cpu_to_le16/32 by using the C
library htole16/32 function calls. However, cpu_to_le16/32 are used when
initializing structures, i.e in a context where a function call is not
allowed.

It works fine on little endian systems because htole16/32 are defined by
the C library as no-ops. But on big-endian systems, they are actually
doing something, which might involve calling a function, causing build
failures, such as:

   ffs-test.c:48:25: error: initializer element is not constant
    #define cpu_to_le32(x)  htole32(x)
                            ^~~~~~~
   ffs-test.c:128:12: note: in expansion of macro ‘cpu_to_le32’
      .magic = cpu_to_le32(FUNCTIONFS_DESCRIPTORS_MAGIC_V2),
               ^~~~~~~~~~~

To solve this, we code cpu_to_le16/32 in a way that allows them to be
used when initializing structures. This fix was imported from
meta-openembedded/android-tools/fix-big-endian-build.patch written by
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>.

CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb/phy: fix PPC64 build errors in phy-fsl-usb.c

[ Upstream commit a39ba90a1cc7010edb0a7132e1b67f3d80b994e9 ]

Fix build errors when built for PPC64:
These variables are only used on PPC32 so they don't need to be
initialized for PPC64.

../drivers/usb/phy/phy-fsl-usb.c: In function 'usb_otg_start':
../drivers/usb/phy/phy-fsl-usb.c:865:3: error: '_fsl_readl' undeclared (first use in this function); did you mean 'fsl_readl'?
   _fsl_readl = _fsl_readl_be;
../drivers/usb/phy/phy-fsl-usb.c:865:16: error: '_fsl_readl_be' undeclared (first use in this function); did you mean 'fsl_readl'?
   _fsl_readl = _fsl_readl_be;
../drivers/usb/phy/phy-fsl-usb.c:866:3: error: '_fsl_writel' undeclared (first use in this function); did you mean 'fsl_writel'?
   _fsl_writel = _fsl_writel_be;
../drivers/usb/phy/phy-fsl-usb.c:866:17: error: '_fsl_writel_be' undeclared (first use in this function); did you mean 'fsl_writel'?
   _fsl_writel = _fsl_writel_be;
../drivers/usb/phy/phy-fsl-usb.c:868:16: error: '_fsl_readl_le' undeclared (first use in this function); did you mean 'fsl_readl'?
   _fsl_readl = _fsl_readl_le;
../drivers/usb/phy/phy-fsl-usb.c:869:17: error: '_fsl_writel_le' undeclared (first use in this function); did you mean 'fsl_writel'?
   _fsl_writel = _fsl_writel_le;

and the sysfs "show" function return type should be ssize_t, not int:

../drivers/usb/phy/phy-fsl-usb.c:1042:49: error: initialization of 'ssize_t (*)(struct device *, struct device_attribute *, char *)' {aka 'long int (*)(struct device *, struct device_attribute *, char *)'} from incompatible pointer type 'int (*)(struct device *, struct device_attribute *, char *)' [-Werror=incompatible-pointer-types]
static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state, NULL);

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: linux-usb@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: u_audio: protect stream runtime fields with stream spinlock

[ Upstream commit 56bc61587daadef67712068f251c4ef2e3932d94 ]

The change protects almost the whole body of u_audio_iso_complete()
function by PCM stream lock, this is mainly sufficient to avoid a race
between USB request completion and stream termination, the change
prevents a possibility of invalid memory access in interrupt context
by memcpy():

    Unable to handle kernel paging request at virtual address 00004e80
    pgd = c0004000
    [00004e80] *pgd=00000000
    Internal error: Oops: 817 [#1] PREEMPT SMP ARM
    CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G         C   3.14.54+ #117
    task: da180b80 ti: da192000 task.ti: da192000
    PC is at memcpy+0x50/0x330
    LR is at 0xcdd92b0e
    pc : [<c029ef30>]    lr : [<cdd92b0e>]    psr: 20000193
    sp : da193ce4  ip : dd86ae26  fp : 0000b180
    r10: daf81680  r9 : 00000000  r8 : d58a01ea
    r7 : 2c0b43e4  r6 : acdfb08b  r5 : 01a271cf  r4 : 87389377
    r3 : 69469782  r2 : 00000020  r1 : daf82fe0  r0 : 00004e80
    Flags: nzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
    Control: 10c5387d  Table: 2b70804a  DAC: 00000015
    Process ksoftirqd/0 (pid: 3, stack limit = 0xda192238)

Also added a check for potential !runtime condition, commonly it is
done by PCM_RUNTIME_CHECK(substream) in the beginning, however this
does not completely prevent from oopses in u_audio_iso_complete(),
because the proper protection scheme must be implemented in PCM
library functions.

An example of *not fixed* oops due to substream->runtime->*
dereference by snd_pcm_running(substream) from
snd_pcm_period_elapsed(), where substream->runtime is gone while
waiting the substream lock:

    Unable to handle kernel paging request at virtual address 6b6b6b6b
    pgd = db7e4000
    [6b6b6b6b] *pgd=00000000
    CPU: 0 PID: 193 Comm: klogd Tainted: G         C   3.14.54+ #118
    task: db5ac500 ti: db60c000 task.ti: db60c000
    PC is at snd_pcm_period_elapsed+0x48/0xd8 [snd_pcm]
    LR is at snd_pcm_period_elapsed+0x40/0xd8 [snd_pcm]
    pc : [<>]    lr : [<>]    psr: 60000193
    Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
    Control: 10c5387d  Table: 2b7e404a  DAC: 00000015
    Process klogd (pid: 193, stack limit = 0xdb60c238)
    [<>] (snd_pcm_period_elapsed [snd_pcm]) from [<>] (udc_irq+0x500/0xbbc)
    [<>] (udc_irq) from [<>] (ci_irq+0x280/0x304)
    [<>] (ci_irq) from [<>] (handle_irq_event_percpu+0xa4/0x40c)
    [<>] (handle_irq_event_percpu) from [<>] (handle_irq_event+0x3c/0x5c)
    [<>] (handle_irq_event) from [<>] (handle_fasteoi_irq+0xc4/0x110)
    [<>] (handle_fasteoi_irq) from [<>] (generic_handle_irq+0x20/0x30)
    [<>] (generic_handle_irq) from [<>] (handle_IRQ+0x80/0xc0)
    [<>] (handle_IRQ) from [<>] (gic_handle_irq+0x3c/0x60)
    [<>] (gic_handle_irq) from [<>] (__irq_svc+0x44/0x78)

Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
[erosca: W/o this patch, with minimal instrumentation [1], I can
         consistently reproduce BUG: KASAN: use-after-free [2]]

[1] Instrumentation to reproduce issue [2]:
#  diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c
#  index a72295c953bb..bd0b308024fe 100644
#  --- a/drivers/usb/gadget/function/u_audio.c
#  +++ b/drivers/usb/gadget/function/u_audio.c
#  @@ -16,6 +16,7 @@
#   #include <sound/core.h>
#   #include <sound/pcm.h>
#   #include <sound/pcm_params.h>
#  +#include <linux/delay.h>
#
#   #include "u_audio.h"
#
#  @@ -147,6 +148,8 @@ static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req)
#
# spin_unlock_irqrestore(&prm->lock, flags);
#
#  + udelay(500); //delay here to increase probability of parallel activities
#  +
# /* Pack USB load in ALSA ring buffer */
# pending = prm->dma_bytes - hw_ptr;

[2] After applying [1], below BUG occurs on Rcar-H3-Salvator-X board:
==================================================================
BUG: KASAN: use-after-free in u_audio_iso_complete+0x24c/0x520 [u_audio]
Read of size 8 at addr ffff8006cafcc248 by task swapper/0/0

CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        WC      4.14.47+ #160
Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (DT)
Call trace:
[<ffff2000080925ac>] dump_backtrace+0x0/0x364
[<ffff200008092924>] show_stack+0x14/0x1c
[<ffff200008f8dbcc>] dump_stack+0x108/0x174
[<ffff2000083c71b8>] print_address_description+0x7c/0x32c
[<ffff2000083c78e8>] kasan_report+0x324/0x354
[<ffff2000083c6114>] __asan_load8+0x24/0x94
[<ffff2000021d1b34>] u_audio_iso_complete+0x24c/0x520 [u_audio]
[<ffff20000152fe50>] usb_gadget_giveback_request+0x480/0x4d0 [udc_core]
[<ffff200001860ab8>] usbhsg_queue_done+0x100/0x130 [renesas_usbhs]
[<ffff20000185f814>] usbhsf_pkt_handler+0x1a4/0x298 [renesas_usbhs]
[<ffff20000185fb38>] usbhsf_irq_ready+0x128/0x178 [renesas_usbhs]
[<ffff200001859cc8>] usbhs_interrupt+0x440/0x490 [renesas_usbhs]
[<ffff2000081a0288>] __handle_irq_event_percpu+0x594/0xa58
[<ffff2000081a07d0>] handle_irq_event_percpu+0x84/0x12c
[<ffff2000081a0928>] handle_irq_event+0xb0/0x10c
[<ffff2000081a8384>] handle_fasteoi_irq+0x1e0/0x2ec
[<ffff20000819e5f8>] generic_handle_irq+0x2c/0x44
[<ffff20000819f0d0>] __handle_domain_irq+0x190/0x194
[<ffff20000808177c>] gic_handle_irq+0x80/0xac
Exception stack(0xffff200009e97c80 to 0xffff200009e97dc0)
7c80: 0000000000000000 0000000000000000 0000000000000003 ffff200008179298
7ca0: ffff20000ae1c180 dfff200000000000 0000000000000000 ffff2000081f9a88
7cc0: ffff200009eb5960 ffff200009e97cf0 0000000000001600 ffff0400041b064b
7ce0: 0000000000000000 0000000000000002 0000000200000001 0000000000000001
7d00: ffff20000842197c 0000ffff958c4970 0000000000000000 ffff8006da0d5b80
7d20: ffff8006d4678498 0000000000000000 000000126bde0a8b ffff8006d4678480
7d40: 0000000000000000 000000126bdbea64 ffff200008fd0000 ffff8006fffff980
7d60: 00000000495f0018 ffff200009e97dc0 ffff200008b6c4ec ffff200009e97dc0
7d80: ffff200008b6c4f0 0000000020000145 ffff8006da0d5b80 ffff8006d4678498
7da0: ffffffffffffffff ffff8006d4678498 ffff200009e97dc0 ffff200008b6c4f0
[<ffff200008084034>] el1_irq+0xb4/0x12c
[<ffff200008b6c4f0>] cpuidle_enter_state+0x818/0x844
[<ffff200008b6c59c>] cpuidle_enter+0x18/0x20
[<ffff20000815f2e4>] call_cpuidle+0x98/0x9c
[<ffff20000815f674>] do_idle+0x214/0x264
[<ffff20000815facc>] cpu_startup_entry+0x20/0x24
[<ffff200008fb09d8>] rest_init+0x30c/0x320
[<ffff2000095f1338>] start_kernel+0x570/0x5b0
---<-snip->---

Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: u_audio: remove cached period bytes value

[ Upstream commit 773e53d50e227b0c03d0bb434c1636f6c49c75b2 ]

Substream period size potentially can be changed in runtime, however
this is not accounted in the data copying routine, the change replaces
the cached value with an actual value from substream runtime.

As a side effect the change also removes a potential division by zero
in u_audio_iso_complete() function, if there is a race with
uac_pcm_hw_free(), which sets prm->period_size to 0.

Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver")
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: u_audio: remove caching of stream buffer parameters

[ Upstream commit 96afb54ece0ee903d23a7ac04ddc461413b972c4 ]

There is no necessity to copy PCM stream ring buffer area and size
properties to UAC private data structure, these values can be got
from substream itself.

The change gives more control on substream and avoid stale caching.

Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver")
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: u_audio: update hw_ptr in iso_complete after data copied

[ Upstream commit 6b37bd78d30c890e575a1bda22978d1d2a233362 ]

In u_audio_iso_complete, the runtime hw_ptr is updated before the
data is actually copied over to/from the buffer/dma area. When
ALSA uses this hw_ptr, the data may not actually be available to
be used. This causes trash/stale audio to play/record. This
patch updates the hw_ptr after the data has been copied to avoid
this.

Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver")
Signed-off-by: Joshua Frkuska <joshua_frkuska@mentor.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: u_audio: fix pcm/card naming in g_audio_setup()

[ Upstream commit dfa042fa310caa475667b8c38d852f14439e0b01 ]

Fix below smatch (v0.5.0-4443-g69e9094e11c1) warnings:
drivers/usb/gadget/function/u_audio.c:607 g_audio_setup() warn: strcpy() 'pcm_name' of unknown size might be too large for 'pcm->name'
drivers/usb/gadget/function/u_audio.c:614 g_audio_setup() warn: strcpy() 'card_name' of unknown size might be too large for 'card->driver'
drivers/usb/gadget/function/u_audio.c:615 g_audio_setup() warn: strcpy() 'card_name' of unknown size might be too large for 'card->shortname'

Below commits performed a similar 's/strcpy/strlcpy/' rework:
* v2.6.31 commit 8372d4980fbc ("ALSA: ctxfi - Fix PCM device naming")
* v4.14 commit 003d3e70dbeb ("ALSA: ad1848: fix format string overflow warning")
* v4.14 commit 6d8b04de87e1 ("ALSA: cs423x: fix format string overflow warning")

Fixes: eb9fecb9e69b ("usb: gadget: f_uac2: split out audio core")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_uac2: fix error handling in afunc_bind (again)

[ Upstream commit e87581fe0509020f77ebf0b7c4c1c338c6a4bcf6 ]

If usb_ep_autoconfig() fails (i.e. returns a null endpoint descriptor),
we expect afunc_bind() to fail (i.e. return a negative error code).

However, due to v4.10-rc1 commit f1d3861d63a5 ("usb: gadget: f_uac2: fix
error handling at afunc_bind"), afunc_bind() returns zero, telling the
caller that it succeeded. This then generates NULL pointer dereference
in below scenario on Rcar H3-ES20-Salvator-X target:

rcar-gen3:/home/root# modprobe g_audio
[  626.521155] g_audio gadget: afunc_bind:565 Error!
[  626.526319] g_audio gadget: Linux USB Audio Gadget, version: Feb 2, 2012
[  626.533405] g_audio gadget: g_audio ready
rcar-gen3:/home/root#
rcar-gen3:/home/root# modprobe -r g_audio
[  728.256707] ==================================================================
[  728.264293] BUG: KASAN: null-ptr-deref in u_audio_stop_capture+0x70/0x268 [u_audio]
[  728.272244] Read of size 8 at addr 00000000000000a0 by task modprobe/2545
[  728.279309]
[  728.280849] CPU: 0 PID: 2545 Comm: modprobe Tainted: G        WC      4.14.47+ #152
[  728.288778] Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (DT)
[  728.296454] Call trace:
[  728.299151] [<ffff2000080925ac>] dump_backtrace+0x0/0x364
[  728.304808] [<ffff200008092924>] show_stack+0x14/0x1c
[  728.310081] [<ffff200008f8d5cc>] dump_stack+0x108/0x174
[  728.315522] [<ffff2000083c77c8>] kasan_report+0x1fc/0x354
[  728.321134] [<ffff2000083c611c>] __asan_load8+0x24/0x94
[  728.326600] [<ffff2000021e1618>] u_audio_stop_capture+0x70/0x268 [u_audio]
[  728.333735] [<ffff2000021f8b7c>] afunc_disable+0x44/0x60 [usb_f_uac2]
[  728.340503] [<ffff20000218177c>] usb_remove_function+0x9c/0x210 [libcomposite]
[  728.348060] [<ffff200002183320>] remove_config.isra.2+0x1d8/0x218 [libcomposite]
[  728.355788] [<ffff200002186c54>] __composite_unbind+0x104/0x1f8 [libcomposite]
[  728.363339] [<ffff200002186d58>] composite_unbind+0x10/0x18 [libcomposite]
[  728.370536] [<ffff20000152f158>] usb_gadget_remove_driver+0xc0/0x170 [udc_core]
[  728.378172] [<ffff20000153154c>] usb_gadget_unregister_driver+0x1cc/0x258 [udc_core]
[  728.386274] [<ffff200002180de8>] usb_composite_unregister+0x10/0x18 [libcomposite]
[  728.394116] [<ffff2000021d035c>] audio_driver_exit+0x14/0x28 [g_audio]
[  728.400878] [<ffff200008213ed4>] SyS_delete_module+0x288/0x32c
[  728.406935] Exception stack(0xffff8006cf6c7ec0 to 0xffff8006cf6c8000)
[  728.413624] 7ec0: 0000000006136428 0000000000000800 0000000000000000 0000ffffd706efe8
[  728.421718] 7ee0: 0000ffffd706efe9 000000000000000a 1999999999999999 0000000000000000
[  728.429792] 7f00: 000000000000006a 000000000042c078 0000000000000000 0000000000000005
[  728.437870] 7f20: 0000000000000000 0000000000000000 0000000000000004 0000000000000000
[  728.445952] 7f40: 000000000042bfc8 0000ffffbc7c8f40 0000000000000000 00000000061363c0
[  728.454035] 7f60: 0000000006136428 0000000000000000 0000000000000000 0000000006136428
[  728.462114] 7f80: 000000000042c000 0000ffffd7071448 000000000042c000 0000000000000000
[  728.470190] 7fa0: 00000000061350c0 0000ffffd7070010 000000000041129c 0000ffffd7070010
[  728.478281] 7fc0: 0000ffffbc7c8f48 0000000060000000 0000000006136428 000000000000006a
[  728.486351] 7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  728.494434] [<ffff200008084780>] el0_svc_naked+0x34/0x38
[  728.499957] ==================================================================
[  728.507801] Unable to handle kernel NULL pointer dereference at virtual address 000000a0
[  728.517742] Mem abort info:
[  728.520993]   Exception class = DABT (current EL), IL = 32 bits
[  728.527375]   SET = 0, FnV = 0
[  728.530731]   EA = 0, S1PTW = 0
[  728.534361] Data abort info:
[  728.537650]   ISV = 0, ISS = 0x00000006
[  728.541863]   CM = 0, WnR = 0
[  728.545167] user pgtable: 4k pages, 48-bit VAs, pgd = ffff8006c6100000
[  728.552156] [00000000000000a0] *pgd=0000000716a8d003
[  728.557519] , *pud=00000007116fc003
[  728.561259] , *pmd=0000000000000000
[  728.564985] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[  728.570815] Modules linked in:
[  728.574023]  usb_f_uac2
[  728.576560]  u_audio
[  728.578827]  g_audio(-)
[  728.581361]  libcomposite
[  728.584071]  configfs
[  728.586428]  aes_ce_blk
[  728.588960]  sata_rcar
[  728.591421]  crypto_simd
[  728.594039]  cryptd
[  728.596217]  libata
[  728.598396]  aes_ce_cipher
[  728.601188]  crc32_ce
[  728.603542]  ghash_ce
[  728.605896]  gf128mul
[  728.608250]  aes_arm64
[  728.610692]  scsi_mod
[  728.613046]  sha2_ce
[  728.615313]  xhci_plat_hcd
[  728.618106]  sha256_arm64
[  728.620811]  sha1_ce
[  728.623077]  renesas_usbhs
[  728.625869]  xhci_hcd
[  728.628243]  renesas_usb3
[  728.630948]  sha1_generic
[  728.633670]  ravb_streaming(C)
[  728.636814]  udc_core
[  728.639168]  cpufreq_dt
[  728.641697]  rcar_gen3_thermal
[  728.644840]  usb_dmac
[  728.647194]  pwm_rcar
[  728.649548]  thermal_sys
[  728.652165]  virt_dma
[  728.654519]  mch_core(C)
[  728.657137]  pwm_bl
[  728.659315]  snd_soc_rcar
[  728.662020]  snd_aloop
[  728.664462]  snd_soc_generic_card
[  728.667869]  snd_soc_ak4613
[  728.670749]  ipv6
[  728.672768]  autofs4
[  728.675052] CPU: 0 PID: 2545 Comm: modprobe Tainted: G    B   WC      4.14.47+ #152
[  728.682973] Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (DT)
[  728.690637] task: ffff8006ced38000 task.stack: ffff8006cf6c0000
[  728.696814] PC is at u_audio_stop_capture+0x70/0x268 [u_audio]
[  728.702896] LR is at u_audio_stop_capture+0x70/0x268 [u_audio]
[  728.708964] pc : [<ffff2000021e1618>] lr : [<ffff2000021e1618>] pstate: 60000145
[  728.716620] sp : ffff8006cf6c7a50
[  728.720154] x29: ffff8006cf6c7a50
[  728.723760] x28: ffff8006ced38000
[  728.727272] x27: ffff200008fd7000
[  728.730857] x26: ffff2000021d2340
[  728.734361] x25: 0000000000000000
[  728.737948] x24: ffff200009e94b08
[  728.741452] x23: 00000000000000a0
[  728.745052] x22: 00000000000000a8
[  728.748558] x21: 1ffff000d9ed8f7c
[  728.752142] x20: ffff8006d671a800
[  728.755646] x19: 0000000000000000
[  728.759231] x18: 0000000000000000
[  728.762736] x17: 0000ffffbc7c8f40
[  728.766320] x16: ffff200008213c4c
[  728.769823] x15: 0000000000000000
[  728.773408] x14: 0720072007200720
[  728.776912] x13: 0720072007200720
[  728.780497] x12: ffffffffffffffff
[  728.784001] x11: 0000000000000040
[  728.787598] x10: 0000000000001600
[  728.791103] x9 : ffff8006cf6c77a0
[  728.794689] x8 : ffff8006ced39660
[  728.798193] x7 : ffff20000811c738
[  728.801794] x6 : 0000000000000000
[  728.805299] x5 : dfff200000000000
[  728.808885] x4 : ffff8006ced38000
[  728.812390] x3 : ffff200008fb46e8
[  728.815976] x2 : 0000000000000007
[  728.819480] x1 : 3ba68643e7431500
[  728.823066] x0 : 0000000000000000
[  728.826574] Process modprobe (pid: 2545, stack limit = 0xffff8006cf6c0000)
[  728.833704] Call trace:
[  728.836292] Exception stack(0xffff8006cf6c7910 to 0xffff8006cf6c7a50)
[  728.842987] 7900:                                   0000000000000000 3ba68643e7431500
[  728.851084] 7920: 0000000000000007 ffff200008fb46e8 ffff8006ced38000 dfff200000000000
[  728.859173] 7940: 0000000000000000 ffff20000811c738 ffff8006ced39660 ffff8006cf6c77a0
[  728.867248] 7960: 0000000000001600 0000000000000040 ffffffffffffffff 0720072007200720
[  728.875323] 7980: 0720072007200720 0000000000000000 ffff200008213c4c 0000ffffbc7c8f40
[  728.883412] 79a0: 0000000000000000 0000000000000000 ffff8006d671a800 1ffff000d9ed8f7c
[  728.891485] 79c0: 00000000000000a8 00000000000000a0 ffff200009e94b08 0000000000000000
[  728.899561] 79e0: ffff2000021d2340 ffff200008fd7000 ffff8006ced38000 ffff8006cf6c7a50
[  728.907636] 7a00: ffff2000021e1618 ffff8006cf6c7a50 ffff2000021e1618 0000000060000145
[  728.915710] 7a20: 0000000000000008 0000000000000000 0000ffffffffffff 3ba68643e7431500
[  728.923780] 7a40: ffff8006cf6c7a50 ffff2000021e1618
[  728.928880] [<ffff2000021e1618>] u_audio_stop_capture+0x70/0x268 [u_audio]
[  728.936032] [<ffff2000021f8b7c>] afunc_disable+0x44/0x60 [usb_f_uac2]
[  728.942822] [<ffff20000218177c>] usb_remove_function+0x9c/0x210 [libcomposite]
[  728.950385] [<ffff200002183320>] remove_config.isra.2+0x1d8/0x218 [libcomposite]
[  728.958134] [<ffff200002186c54>] __composite_unbind+0x104/0x1f8 [libcomposite]
[  728.965689] [<ffff200002186d58>] composite_unbind+0x10/0x18 [libcomposite]
[  728.972882] [<ffff20000152f158>] usb_gadget_remove_driver+0xc0/0x170 [udc_core]
[  728.980522] [<ffff20000153154c>] usb_gadget_unregister_driver+0x1cc/0x258 [udc_core]
[  728.988638] [<ffff200002180de8>] usb_composite_unregister+0x10/0x18 [libcomposite]
[  728.996472] [<ffff2000021d035c>] audio_driver_exit+0x14/0x28 [g_audio]
[  729.003231] [<ffff200008213ed4>] SyS_delete_module+0x288/0x32c
[  729.009278] Exception stack(0xffff8006cf6c7ec0 to 0xffff8006cf6c8000)
[  729.015946] 7ec0: 0000000006136428 0000000000000800 0000000000000000 0000ffffd706efe8
[  729.024022] 7ee0: 0000ffffd706efe9 000000000000000a 1999999999999999 0000000000000000
[  729.032099] 7f00: 000000000000006a 000000000042c078 0000000000000000 0000000000000005
[  729.040172] 7f20: 0000000000000000 0000000000000000 0000000000000004 0000000000000000
[  729.048263] 7f40: 000000000042bfc8 0000ffffbc7c8f40 0000000000000000 00000000061363c0
[  729.056337] 7f60: 0000000006136428 0000000000000000 0000000000000000 0000000006136428
[  729.064411] 7f80: 000000000042c000 0000ffffd7071448 000000000042c000 0000000000000000
[  729.072484] 7fa0: 00000000061350c0 0000ffffd7070010 000000000041129c 0000ffffd7070010
[  729.080563] 7fc0: 0000ffffbc7c8f48 0000000060000000 0000000006136428 000000000000006a
[  729.088636] 7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  729.096733] [<ffff200008084780>] el0_svc_naked+0x34/0x38
[  729.102259] Code: 9597d1b3 aa1703e0 9102a276 958792b9 (f9405275)
[  729.108617] ---[ end trace 7560c5fa3d100243 ]---

After this patch is applied, the issue is fixed:
rcar-gen3:/home/root# modprobe g_audio
[   59.217127] g_audio gadget: afunc_bind:565 Error!
[   59.222329] g_audio ee020000.usb: failed to start g_audio: -19
modprobe: ERROR: could not insert 'g_audio': No such device
rcar-gen3:/home/root# modprobe -r g_audio
rcar-gen3:/home/root#

Fixes: f1d3861d63a5 ("usb: gadget: f_uac2: fix error handling at afunc_bind")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: r8a66597: Fix a possible sleep-in-atomic-context bugs in r8a66597_queue()

[ Upstream commit f36b507c14c4b6e634463a610294e9cb0065c8ea ]

The driver may sleep in an interrupt handler.
The function call path (from bottom to top) in Linux-4.16.7 is:

[FUNC] r8a66597_queue(GFP_KERNEL)
drivers/usb/gadget/udc/r8a66597-udc.c, 1193:
r8a66597_queue in get_status
drivers/usb/gadget/udc/r8a66597-udc.c, 1301:
get_status in setup_packet
drivers/usb/gadget/udc/r8a66597-udc.c, 1381:
setup_packet in irq_control_stage
drivers/usb/gadget/udc/r8a66597-udc.c, 1508:
irq_control_stage in r8a66597_irq (interrupt handler)

To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC.

This bug is found by my static analysis tool (DSAC-2) and checked by
my code review.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: r8a66597: Fix two possible sleep-in-atomic-context bugs in init_controller()

[ Upstream commit 0602088b10a7c0b4e044a810678ef93d7cc5bf48 ]

The driver may sleep with holding a spinlock.
The function call paths (from bottom to top) in Linux-4.16.7 are:

[FUNC] msleep
drivers/usb/gadget/udc/r8a66597-udc.c, 839:
msleep in init_controller
drivers/usb/gadget/udc/r8a66597-udc.c, 96:
init_controller in r8a66597_usb_disconnect
drivers/usb/gadget/udc/r8a66597-udc.c, 93:
spin_lock in r8a66597_usb_disconnect

[FUNC] msleep
drivers/usb/gadget/udc/r8a66597-udc.c, 835:
msleep in init_controller
drivers/usb/gadget/udc/r8a66597-udc.c, 96:
init_controller in r8a66597_usb_disconnect
drivers/usb/gadget/udc/r8a66597-udc.c, 93:
spin_lock in r8a66597_usb_disconnect

To fix these bugs, msleep() is replaced with mdelay().

This bug is found by my static analysis tool (DSAC-2) and checked by
my code review.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nbd: handle unexpected replies better

[ Upstream commit 8f3ea35929a0806ad1397db99a89ffee0140822a ]

If the server or network is misbehaving and we get an unexpected reply
we can sometimes miss the request not being started and wait on a
request and never get a response, or even double complete the same
request.  Fix this by replacing the send_complete completion with just a
per command lock.  Add a per command cookie as well so that we can know
if we're getting a double completion for a previous event.  Also check
to make sure we dont have REQUEUED set as that means we raced with the
timeout handler and need to just let the retry occur.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nbd: don't requeue the same request twice.

[ Upstream commit d7d94d48a272fd7583dc3c83acb8f5ed4ef456a4 ]

We can race with the snd timeout and the per-request timeout and end up
requeuing the same request twice. We can't use the send_complete
completion to tell if everything is ok because we hold the tx_lock
during send, so the timeout stuff will block waiting to mark the socket
dead, and we could be marked complete and still requeue. Instead add a
flag to the socket so we know whether we've been requeued yet.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/imx: imx-ldb: check if channel is enabled before printing warning

[ Upstream commit c80d673b91a6c81d765864e10f2b15110ee900ad ]

If the second LVDS channel has been disabled in the DT when using dual-channel
mode we should not print a warning.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/imx: imx-ldb: disable LDB on driver bind

[ Upstream commit b58262396fabd43dc869b576e3defdd23b32fe94 ]

The LVDS signal integrity is only guaranteed when the correct enable
sequence (first IPU DI, then LDB) is used. If the LDB display output was
active before the imx-drm driver is loaded (like when a bootsplash was
active) the DI will be disabled by the full IPU reset we do when loading
the driver. The LDB control registers are not part of the IPU range and
thus will remain unchanged.

This leads to the LDB still being active when the DI is getting enabled,
effectively reversing the required enable sequence. Fix this by also
disabling the LDB on driver bind.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: libiscsi: fix possible NULL pointer dereference in case of TMF

[ Upstream commit a17037e7d59075053b522048742a08ac9500bde8 ]

In iscsi_check_tmf_restrictions() task->hdr is dereferenced to print the
opcode, it is possible that task->hdr is NULL.

There are two cases based on opcode argument:

1. ISCSI_OP_SCSI_CMD - In this case alloc_pdu() is called
after iscsi_check_tmf_restrictions()

iscsi_prep_scsi_cmd_pdu() -> iscsi_check_tmf_restrictions() -> alloc_pdu().

Transport drivers allocate memory for iSCSI hdr in alloc_pdu() and assign
it to task->hdr. In case of TMF task->hdr will be NULL resulting in NULL
pointer dereference.

2. ISCSI_OP_SCSI_DATA_OUT - In this case transport driver can free the
memory for iSCSI hdr after transmitting the pdu so task->hdr can be NULL or
invalid.

This patch fixes this issue by removing task->hdr->opcode from the printk
statement.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: target: iscsi: cxgbit: fix max iso npdu calculation

[ Upstream commit 1b350ea0c2f4df9aa30426614c8eb755a8c32814 ]

- rounddown CXGBIT_MAX_ISO_PAYLOAD by csk->emss before calculating
max_iso_npdu to get max TCP payload in multiple of mss.

- call cxgbit_set_digest() before cxgbit_set_iso_npdu() to set
csk->submode, it is used in calculating number of iso pdus.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: adv7511: Reset registers on hotplug

[ Upstream commit 5f3417569165a8ee57654217f73e0160312f409c ]

The bridge loses its hw state when the cable is unplugged. If we detect
this case in the hpd handler, reset its state.

Reported-by: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703165648.120401-1-seanpaul@chromium.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>