arm64: dts: qcom: sm8350: Fix CPU idle state residency times

[ Upstream commit 91ce3693e2fb685f31d39605a5ad1fbd940804da ]

The present values look to have been copypasted from 8150 or 8180.
Fix that.

Fixes: 07ddb302811e ("arm64: dts: qcom: sm8350: Add CPU topology and idle-states")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705-topic-sm8350_fixes-v1-2-0f69f70ccb6a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdm845-tama: Set serial indices and stdout-path

[ Upstream commit 9acc60c3e2d449243e4c2126e3b56f1c4f7fd3bc ]

UART6 is used for debug (routed via uSD pins) and UART9 is connected
to the bluetooth chip.

Set indexed aliases to make the GENI UART driver happy and route serial
traffic through the debug uart by default.

Fixes: 30a7f99befc6 ("arm64: dts: qcom: Add support for SONY Xperia XZ2 / XZ2C / XZ3 (Tama platform)")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20230627-topic-tama_uart-v1-1-0fa790248db8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8996: Add missing interrupt to the USB2 controller

[ Upstream commit 36541089c4733355ed844c67eebd0c3936953454 ]

The interrupt line was previously not described. Take care of that.

Fixes: 1e39255ed29d ("arm64: dts: msm8996: Add device node for qcom,dwc3")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-11-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc8280xp: Add missing SCM interconnect

[ Upstream commit 0a69ccf20b0837db857abfc94d7e3bacf1cb771b ]

The SCM interconnect path was missing. Add it.

Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230622-topic-8280scmicc-v1-2-6ef318919ea5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc8280xp-crd: Correct vreg_misc_3p3 GPIO

[ Upstream commit 9566b5271f68bdf6e69b7c511850e3fb75cd18be ]

The vreg_misc_3p3 regulator is controlled by PMC8280_1 GPIO 2, not 1, on
the CRD.

Fixes: ccd3517faf18 ("arm64: dts: qcom: sc8280xp: Add reference device")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230620203915.141337-1-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250-edo: Rectify gpio-keys

[ Upstream commit a422c6a91a667b309ca1a6c08b30dbfcf7d4e866 ]

Set up the corresponding GPIOs properly and add the leftover hardware
buttons to mark this piece of the puzzle complete.

Fixes: 46e14907c716 ("arm64: dts: qcom: sm8250-edo: Add hardware keys")
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-4-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250-edo: Add GPIO line names for PMIC GPIOs

[ Upstream commit 6b8a63350752c6a5e4b54f2de6174084652cd3cd ]

Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).

Add these to the PDX203&206 DTSIs to better document the hardware.

Diff between 203 and 206:
pm8009_gpios
<                         "CAM_PWR_LD_EN",
>                         "NC",

pm8150_gpios
<                         "NC",
>                         "G_ASSIST_N",
<                         "WLC_EN_N", /* GPIO_10 */
>                         "NC", /* GPIO_10 */
Which is due to 5 II having an additional Google Assistant hardware
button and 1 II having a wireless charger & different camera wiring
to accommodate the additional 3D iToF sensor.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-2-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: a422c6a91a66 ("arm64: dts: qcom: sm8250-edo: Rectify gpio-keys")
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250-edo: Add gpio line names for TLMM

[ Upstream commit 40b398beabdfe0e9088b13976e56b1dc706fe851 ]

Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).

Add these to the PDX203&206 DTSIs to better document the hardware.

Diff between 203 and 206:
<                         "CAM_PWR_A_CS",
>                         "FRONTC_PWR_EN",
<                         "CAM4_MCLK",
<                         "TOF_RST_N",
>                         "NC",
>                         "NC",
<                         "WLC_I2C_SDA",
<                         "WLC_I2C_SCL", /* GPIO_120 */
>                         "NC",
>                         "NC",
<                         "WLC_INT_N",
>                         "NC",

Which makes sense, as 203 has a 3D iToF, slightly different camera
power wiring and WLC (WireLess Charging).

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-1-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: a422c6a91a66 ("arm64: dts: qcom: sm8250-edo: Rectify gpio-keys")
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8916-l8150: correct light sensor VDDIO supply

[ Upstream commit 6a541eaa6e8e5283efb993ae7a947bede8d01fa5 ]

liteon,ltr559 light sensor takes VDDIO, not VIO, supply:

  msm8916-longcheer-l8150.dtb: light-sensor@23: 'vio-supply' does not match any of the regexes: 'pinctrl-[0-9]+'

Fixes: 3016af34ef8d ("arm64: dts: qcom: msm8916-longcheer-l8150: Add light and proximity sensor")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20230617171541.286957-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250: correct dynamic power coefficients

[ Upstream commit 775a5283c25d160b2a1359018c447bc518096547 ]

sm8250 faces the same problem with its Energy Model as sdm845. The energy
cost of LITTLE cores is reported to be higher than medium or big cores

EM computes the energy with formula:

energy = OPP's cost / maximum cpu capacity * utilization

On v6.4-rc6 we have:
max capacity of CPU0 = 284
capacity of CPU0's OPP(1612800 Hz) = 253
cost of CPU0's OPP(1612800 Hz) = 191704

max capacity of CPU4 = 871
capacity of CPU4's OPP(710400 Hz) = 255
cost of CPU4's OPP(710400 Hz) = 343217

Both OPPs have almost the same compute capacity but the estimated energy
per unit of utilization will be estimated to:

energy CPU0 = 191704 / 284 * 1 = 675
energy CPU4 = 343217 / 871 * 1 = 394

EM estimates that little CPU0 will consume 71% more than medium CPU4 for
the same compute capacity. According to [1], little consumes 25% less than
medium core for Coremark benchmark at those OPPs for the same duration.

Set the dynamic-power-coefficient of CPU0-3 to 105 to fix the energy model
for little CPUs.

[1] https://github.com/kdrag0n/freqbench/tree/master/results/sm8250/k30s

Fixes: 6aabed5526ee ("arm64: dts: qcom: sm8250: Add CPU capacities and energy model")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230615154852.130076-1-vincent.guittot@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm6350: Fix ZAP region

[ Upstream commit 44bcded2be4fe9b9d0b6e48075c9947b75c0af63 ]

The previous ZAP region definition was wrong. Fix it.
Note this is not a device-specific fixup, but a fixup to the generic
PIL load address.

Fixes: 5f82b9cda61e ("arm64: dts: qcom: Add SM6350 device tree")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230315-topic-lagoon_gpu-v2-6-afcdfb18bb13@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: ocmem: Fix NUM_PORTS & NUM_MACROS macros

[ Upstream commit a7b484b1c9332a1ee12e8799d62a11ee3f8e0801 ]

Since we're using these two macros to read a value from a register, we
need to use the FIELD_GET instead of the FIELD_PREP macro, otherwise
we're getting wrong values.

So instead of:

  [    3.111779] ocmem fdd00000.sram: 2 ports, 1 regions, 512 macros, not interleaved

we now get the correct value of:

  [    3.129672] ocmem fdd00000.sram: 2 ports, 1 regions, 2 macros, not interleaved

Fixes: 88c1e9404f1d ("soc: qcom: add OCMEM driver")
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230506-msm8226-ocmem-v3-1-79da95a2581f@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: ocmem: Add OCMEM hardware version print

[ Upstream commit e81a16e77259294cd4ff0a9c1fbe5aa0e311a47d ]

It might be useful to know what hardware version of the OCMEM block the
SoC contains. Add a debug print for that.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509-ocmem-hwver-v3-1-e51f3488e0f4@z3ntu.xyz
Stable-dep-of: a7b484b1c933 ("soc: qcom: ocmem: Fix NUM_PORTS & NUM_MACROS macros")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: stac9766: fix build errors with REGMAP_AC97

[ Upstream commit c70064b96f509daa78f57992aeabcf274fb2fed4 ]

Select REGMAP_AC97 to fix these build errors:

ERROR: modpost: "regmap_ac97_default_volatile" [sound/soc/codecs/snd-soc-stac9766.ko] undefined!
ERROR: modpost: "__regmap_init_ac97" [sound/soc/codecs/snd-soc-stac9766.ko] undefined!

Fixes: 6bbf787bb70c ("ASoC: stac9766: Convert to regmap")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: alsa-devel@alsa-project.org
Link: https://lore.kernel.org/r/20230701044836.18789-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/hyperv: Fix a compilation issue because of not including screen_info.h

[ Upstream commit 8d1077cf2e43b15fefd76ebec2b71541eb27ef2c ]

Fixes the following build errors on arm64:

drivers/video/fbdev/hyperv_fb.c: In function 'hvfb_getmem':
>> drivers/video/fbdev/hyperv_fb.c:1033:24: error: 'screen_info' undeclared (first use in this function)
    1033 |                 base = screen_info.lfb_base;
         |                        ^~~~~~~~~~~
drivers/video/fbdev/hyperv_fb.c:1033:24: note: each undeclared identifier is reported only once for each function it appears in

>> drivers/gpu/drm/hyperv/hyperv_drm_drv.c:75:54: error: 'screen_info' undeclared (first use in this function)
      75 |         drm_aperture_remove_conflicting_framebuffers(screen_info.lfb_base,
 |                                                      ^~~~~~~~~~~
drivers/gpu/drm/hyperv/hyperv_drm_drv.c:75:54: note: each undeclared identifier is reported only once for each function it appears in

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307090823.nxnT8Kk5-lkp@intel.com/
Fixes: 81d2393485f0 ("fbdev/hyperv-fb: Do not set struct fb_info.apertures")
Fixes: 8b0d13545b09 ("efi: Do not include <linux/screen_info.h> from EFI header")
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230709100514.703759-1-suijingfeng@loongson.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Do not set drr on pipe commit

[ Upstream commit e101bf95ea87ccc03ac2f48dfc0757c6364ff3c7 ]

[WHY]
Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a
pipe commit can cause underflow.

[HOW]
Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets
optimized_required.

This change expects that Freesync requests are blocked when
optimized_required is true.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

quota: fix dqput() to follow the guarantees dquot_srcu should provide

[ Upstream commit dabc8b20756601b9e1cc85a81d47d3f98ed4d13a ]

The dquot_mark_dquot_dirty() using dquot references from the inode
should be protected by dquot_srcu. quota_off code takes care to call
synchronize_srcu(&dquot_srcu) to not drop dquot references while they
are used by other users. But dquot_transfer() breaks this assumption.
We call dquot_transfer() to drop the last reference of dquot and add
it to free_dquots, but there may still be other users using the dquot
at this time, as shown in the function graph below:

       cpu1              cpu2
_________________|_________________
wb_do_writeback         CHOWN(1)
 ...
  ext4_da_update_reserve_space
   dquot_claim_block
    ...
     dquot_mark_dquot_dirty // try to dirty old quota
      test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE
      if (test_bit(DQ_MOD_B, &dquot->dq_flags))
      // test no dirty, wait dq_list_lock
                    ...
                     dquot_transfer
                      __dquot_transfer
                      dqput_all(transfer_from) // rls old dquot
                       dqput // last dqput
                        dquot_release
                         clear_bit(DQ_ACTIVE_B, &dquot->dq_flags)
                        atomic_dec(&dquot->dq_count)
                        put_dquot_last(dquot)
                         list_add_tail(&dquot->dq_free, &free_dquots)
                         // add the dquot to free_dquots
      if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags))
        add dqi_dirty_list // add released dquot to dirty_list

This can cause various issues, such as dquot being destroyed by
dqcache_shrink_scan() after being added to free_dquots, which can trigger
a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots
and then to dirty_list, it is added to free_dquots again after
dquot_writeback_dquots() is executed, which causes the free_dquots list to
be corrupted and triggers a UAF when dqcache_shrink_scan() is called for
freeing dquot twice.

As Honza said, we need to fix dquot_transfer() to follow the guarantees
dquot_srcu should provide. But calling synchronize_srcu() directly from
dquot_transfer() is too expensive (and mostly unnecessary). So we add
dquot whose last reference should be dropped to the new global dquot
list releasing_dquots, and then queue work item which would call
synchronize_srcu() and after that perform the final cleanup of all the
dquots on releasing_dquots.

Fixes: 4580b30ea887 ("quota: Do not dirty bad dquots")
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230630110822.3881712-5-libaokun1@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

quota: add new helper dquot_active()

[ Upstream commit 33bcfafc48cb186bc4bbcea247feaa396594229e ]

Add new helper function dquot_active() to make the code more concise.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230630110822.3881712-4-libaokun1@huawei.com>
Stable-dep-of: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
Signed-off-by: Sasha Levin <sashal@kernel.org>

quota: rename dquot_active() to inode_quota_active()

[ Upstream commit 4b9bdfa16535de8f49bf954aeed0f525ee2fc322 ]

Now we have a helper function dquot_dirty() to determine if dquot has
DQ_MOD_B bit. dquot_active() can easily be misunderstood as a helper
function to determine if dquot has DQ_ACTIVE_B bit. So we avoid this by
renaming it to inode_quota_active() and later on we will add the helper
function dquot_active() to determine if dquot has DQ_ACTIVE_B bit.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230630110822.3881712-3-libaokun1@huawei.com>
Stable-dep-of: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
Signed-off-by: Sasha Levin <sashal@kernel.org>

quota: factor out dquot_write_dquot()

[ Upstream commit 024128477809f8073d870307c8157b8826ebfd08 ]

Refactor out dquot_write_dquot() to reduce duplicate code.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230630110822.3881712-2-libaokun1@huawei.com>
Stable-dep-of: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs43130: Fix numerator/denominator mixup

[ Upstream commit a9e7c964cea4fb1541cc81a11d1b2fd135f4cf38 ]

In converting to using the standard u16_fract type, commit [1] made the
obvious mistake and failed to take account of the difference in
numerator and denominator ordering, breaking all uses of the cs43130
codec.

Fix it.

[1] commit e14bd35ef446 ("ASoC: cs43130: Re-use generic struct u16_fract")

Fixes: e14bd35ef446 ("ASoC: cs43130: Re-use generic struct u16_fract")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230621153229.1944132-1-phil@raspberrypi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tc358764: Fix debug print parameter order

[ Upstream commit 7f947be02aab5b154427cb5b0fffe858fc387b02 ]

The debug print parameters were swapped in the output and they were
printed as decimal values, both the hardware address and the value.
Update the debug print to print the parameters in correct order, and
use hexadecimal print for both address and value.

Fixes: f38b7cca6d0e ("drm/bridge: tc358764: Add DSI to LVDS bridge driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615152817.359420-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

netrom: Deny concurrent connect().

[ Upstream commit c2f8fd7949603efb03908e05abbf7726748c8de3 ]

syzkaller reported null-ptr-deref [0] related to AF_NETROM.
This is another self-accept issue from the strace log. [1]

syz-executor creates an AF_NETROM socket and calls connect(), which
is blocked at that time.  Then, sk->sk_state is TCP_SYN_SENT and
sock->state is SS_CONNECTING.

  [pid  5059] socket(AF_NETROM, SOCK_SEQPACKET, 0) = 4
  [pid  5059] connect(4, {sa_family=AF_NETROM, sa_data="..." <unfinished ...>

Another thread calls connect() concurrently, which finally fails
with -EINVAL.  However, the problem here is the socket state is
reset even while the first connect() is blocked.

  [pid  5060] connect(4, NULL, 0 <unfinished ...>
  [pid  5060] <... connect resumed>)      = -1 EINVAL (Invalid argument)

As sk->state is TCP_CLOSE and sock->state is SS_UNCONNECTED, the
following listen() succeeds.  Then, the first connect() looks up
itself as a listener and puts skb into the queue with skb->sk itself.
As a result, the next accept() gets another FD of itself as 3, and
the first connect() finishes.

  [pid  5060] listen(4, 0 <unfinished ...>
  [pid  5060] <... listen resumed>)       = 0
  [pid  5060] accept(4, NULL, NULL <unfinished ...>
  [pid  5060] <... accept resumed>)       = 3
  [pid  5059] <... connect resumed>)      = 0

Then, accept4() is called but blocked, which causes the general protection
fault later.

  [pid  5059] accept4(4, NULL, 0x20000400, SOCK_NONBLOCK <unfinished ...>

After that, another self-accept occurs by accept() and writev().

  [pid  5060] accept(4, NULL, NULL <unfinished ...>
  [pid  5061] writev(3, [{iov_base=...}] <unfinished ...>
  [pid  5061] <... writev resumed>)       = 99
  [pid  5060] <... accept resumed>)       = 6

Finally, the leader thread close()s all FDs.  Since the three FDs
reference the same socket, nr_release() does the cleanup for it
three times, and the remaining accept4() causes the following fault.

  [pid  5058] close(3)                    = 0
  [pid  5058] close(4)                    = 0
  [pid  5058] close(5)                    = -1 EBADF (Bad file descriptor)
  [pid  5058] close(6)                    = 0
  [pid  5058] <... exit_group resumed>)   = ?
  [   83.456055][ T5059] general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN

To avoid the issue, we need to return an error for connect() if
another connect() is in progress, as done in __inet_stream_connect().

[0]:
general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
CPU: 0 PID: 5059 Comm: syz-executor.0 Not tainted 6.5.0-rc5-syzkaller-00194-gace0ab3a4b54 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
RIP: 0010:__lock_acquire+0x109/0x5de0 kernel/locking/lockdep.c:5012
Code: 45 85 c9 0f 84 cc 0e 00 00 44 8b 05 11 6e 23 0b 45 85 c0 0f 84 be 0d 00 00 48 ba 00 00 00 00 00 fc ff df 4c 89 d1 48 c1 e9 03 <80> 3c 11 00 0f 85 e8 40 00 00 49 81 3a a0 69 48 90 0f 84 96 0d 00
RSP: 0018:ffffc90003d6f9e0 EFLAGS: 00010006
RAX: ffff8880244c8000 RBX: 1ffff920007adf6c RCX: 0000000000000003
RDX: dffffc0000000000 RSI: 0000000000000000 RDI: 0000000000000018
RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000018 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS:  00007f51d519a6c0(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f51d5158d58 CR3: 000000002943f000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 lock_acquire kernel/locking/lockdep.c:5761 [inline]
 lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5726
 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
 _raw_spin_lock_irqsave+0x3a/0x50 kernel/locking/spinlock.c:162
 prepare_to_wait+0x47/0x380 kernel/sched/wait.c:269
 nr_accept+0x20d/0x650 net/netrom/af_netrom.c:798
 do_accept+0x3a6/0x570 net/socket.c:1872
 __sys_accept4_file net/socket.c:1913 [inline]
 __sys_accept4+0x99/0x120 net/socket.c:1943
 __do_sys_accept4 net/socket.c:1954 [inline]
 __se_sys_accept4 net/socket.c:1951 [inline]
 __x64_sys_accept4+0x96/0x100 net/socket.c:1951
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f51d447cae9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f51d519a0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000120
RAX: ffffffffffffffda RBX: 00007f51d459bf80 RCX: 00007f51d447cae9
RDX: 0000000020000400 RSI: 0000000000000000 RDI: 0000000000000004
RBP: 00007f51d44c847a R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000800 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007f51d459bf80 R15: 00007ffc25c34e48
 </TASK>

Link: https://syzkaller.appspot.com/text?tag=CrashLog&x=152cdb63a80000
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+666c97e4686410e79649@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=666c97e4686410e79649
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/sched: sch_hfsc: Ensure inner classes have fsc curve

[ Upstream commit b3d26c5702c7d6c45456326e56d2ccf3f103e60f ]

HFSC assumes that inner classes have an fsc curve, but it is currently
possible for classes without an fsc curve to become parents. This leads
to bugs including a use-after-free.

Don't allow non-root classes without HFSC_FSC to become parents.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Budimir Markovic <markovicbudimir@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230824084905.422-1-markovicbudimir@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sfc: Check firmware supports Ethernet PTP filter

[ Upstream commit c4413a20fa6d7c4888009fb7dd391685f196cd36 ]

Not all firmware variants support RSS filters. Do not fail all PTP
functionality when raw ethernet PTP filters fail to insert.

Fixes: e4616f64726b ("sfc: support PTP over Ethernet")
Signed-off-by: Alex Austin <alex.austin@amd.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Link: https://lore.kernel.org/r/20230824164657.42379-1-alex.austin@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cteonxt2-pf: Fix backpressure config for multiple PFC priorities to work simultaneously

[ Upstream commit 597d0ec0e4ca6a912affea4cc94df08959e9ec74 ]

MAC (CGX or RPM) asserts backpressure at TL3 or TL2 node of the egress
hierarchical scheduler tree depending on link level config done. If
there are multiple PFC priorities enabled at a time and for all such
flows to backoff, each priority will have to assert backpressure at
different TL3/TL2 scheduler nodes and these flows will need to submit
egress pkts to these nodes.

Current PFC configuration has an issue where in only one backpressure
scheduler node is being allocated which is resulting in only one PFC
priority to work. This patch fixes this issue.

Fixes: 99c969a83d82 ("octeontx2-pf: Add egress PFC support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824081032.436432-4-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-pf: Fix PFC TX scheduler free

[ Upstream commit a9ac2e18779597f280d68a5b5f5bdd51a34080fa ]

During PFC TX schedulers free, flag TXSCHQ_FREE_ALL was being set
which caused free up all schedulers other than the PFC schedulers.
This patch fixes that to free only the PFC Tx schedulers.

Fixes: 99c969a83d82 ("octeontx2-pf: Add egress PFC support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230824081032.436432-2-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-pf: Refactor schedular queue alloc/free calls

[ Upstream commit 6b4b2ded9c4282deea421eef144ab0ced954721c ]

1. Upon txschq free request, the transmit schedular config in hardware
is not getting reset. This patch adds necessary changes to do the same.

2. Current implementation calls txschq alloc during interface
initialization and in response handler updates the default txschq array.
This creates a problem for htb offload where txsch alloc will be called
for every tc class. This patch addresses the issue by reading txschq
response in mbox caller function instead in the response handler.

3. Current otx2_txschq_stop routine tries to free all txschq nodes
allocated to the interface. This creates a problem for htb offload.
This patch introduces the otx2_txschq_free_one to free txschq in a
given level.

Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: a9ac2e187795 ("octeontx2-pf: Fix PFC TX scheduler free")
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (tmp513) Fix the channel number in tmp51x_is_visible()

[ Upstream commit d103337e38e7e64c3d915029e947b1cb0b512737 ]

The supported channels for this driver are {0..3}. Fix the incorrect
channel in tmp51x_is_visible().

Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/ea0eccc0-a29f-41e4-9049-a1a13f8b16f1@roeck-us.net/
Fixes: 59dfa75e5d82 ("hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230824204456.401580-2-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxsw: core_hwmon: Adjust module label names based on MTCAP sensor counter

[ Upstream commit 3fc134a07438055fc93ce1bbacf2702ddd09500c ]

Transceiver module temperature sensors are indexed after ASIC and
platform sensors. The current label printing method does not take this
into account and simply prints the index of the transceiver module
sensor.

On new systems that have platform sensors this results in incorrect
(shifted) transceiver module labels being printed:

$ sensors
[...]
front panel 002:  +37.0°C  (crit = +70.0°C, emerg = +75.0°C)
front panel 003:  +47.0°C  (crit = +70.0°C, emerg = +75.0°C)
[...]

Fix by taking the sensor count into account. After the fix:

$ sensors
[...]
front panel 001:  +37.0°C  (crit = +70.0°C, emerg = +75.0°C)
front panel 002:  +47.0°C  (crit = +70.0°C, emerg = +75.0°C)
[...]

Fixes: a53779de6a0e ("mlxsw: core: Add QSFP module temperature label attribute to hwmon")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxsw: i2c: Limit single transaction buffer size

[ Upstream commit d7248f1cc835bd80e936dc5b2d94b149bdd0077d ]

Maximum size of buffer is obtained from underlying I2C adapter and in
case adapter allows I2C transaction buffer size greater than 100 bytes,
transaction will fail due to firmware limitation.

As a result driver will fail initialization.

Limit the maximum size of transaction buffer by 100 bytes to fit to
firmware.

Remove unnecessary calculation:
max_t(u16, MLXSW_I2C_BLK_DEF, quirk_size).
This condition can not happened.

Fixes: 3029a693beda ("mlxsw: i2c: Allow flexible setting of I2C transactions size")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxsw: i2c: Fix chunk size setting in output mailbox buffer

[ Upstream commit 146c7c330507c0384bf29d567186632bfe975927 ]

The driver reads commands output from the output mailbox. If the size
of the output mailbox is not a multiple of the transaction /
block size, then the driver will not issue enough read transactions
to read the entire output, which can result in driver initialization
errors.

Fix by determining the number of transactions using DIV_ROUND_UP().

Fixes: 3029a693beda ("mlxsw: i2c: Allow flexible setting of I2C transactions size")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: arcnet: Do not call kfree_skb() under local_irq_disable()

[ Upstream commit 786c96e92fb9e854cb8b0cb7399bb2fb28e15c4b ]

It is not allowed to call kfree_skb() from hardware interrupt
context or with hardware interrupts being disabled.
So replace kfree_skb() with dev_kfree_skb_irq() under
local_irq_disable(). Compile tested only.

Fixes: 05fcd31cc472 ("arcnet: add err_skb package for package status feedback")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: avoid executing commands on other ports when driving sync

[ Upstream commit 0aacec49c29e7c5b1487e859b0c0a42388c34092 ]

The ice hardware has a synchronization mechanism used to drive the
simultaneous application of commands on both PHY ports and the source timer
in the MAC.

When issuing a sync via ice_ptp_exec_tmr_cmd(), the hardware will
simultaneously apply the commands programmed for the main timer and each
PHY port. Neither the main timer command register, nor the PHY port command
registers auto clear on command execution.

During the execution of a timer command intended for a single port on E822
devices, such as those used to configure a PHY during link up, the driver
is not correctly clearing the previous commands.

This results in unintentionally executing the last programmed command on
the main timer and other PHY ports whenever performing reconfiguration on
E822 ports after link up. This results in unintended side effects on other
timers, depending on what command was previously programmed.

To fix this, the driver must ensure that the main timer and all other PHY
ports are properly initialized to perform no action.

The enumeration for timer commands does not include an enumeration value
for doing nothing. Introduce ICE_PTP_NOP for this purpose. When writing a
timer command to hardware, leave the command bits set to zero which
indicates that no operation should be performed on that port.

Modify ice_ptp_one_port_cmd() to always initialize all ports. For all ports
other than the one being configured, write their timer command register to
ICE_PTP_NOP. This ensures that no side effect happens on the timer command.

To fix this for the PHY ports, modify ice_ptp_one_port_cmd() to always
initialize all other ports to ICE_PTP_NOP. This ensures that no side
effects happen on the other ports.

Call ice_ptp_src_cmd() with a command value if ICE_PTP_NOP in
ice_sync_phy_timer_e822() and ice_start_phy_timer_e822().

With both of these changes, the driver should no longer execute a stale
command on the main timer or another PHY port when reconfiguring one of the
PHY ports after link up.

Fixes: 3a7496234d17 ("ice: implement basic E822 PTP support")
Signed-off-by: Siddaraju DH <siddaraju.dh@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath9k: use IS_ERR() with debugfs_create_dir()

[ Upstream commit 1e4134610d93271535ecf900a676e1f094e9944c ]

The debugfs_create_dir() function returns error pointers,
it never returns NULL. Most incorrect error checks were fixed,
but the one in ath9k_htc_init_debug() was forgotten.

Fix the remaining error check.

Fixes: e5facc75fa91 ("ath9k_htc: Cleanup HTC debugfs")
Signed-off-by: Wang Ming <machel@vivo.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230713030358.12379-1-machel@vivo.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: mm: use ptep_clear() instead of pte_clear() in clear_flush()

[ Upstream commit 00de2c9f26b15f1a6f2af516dd8ec5f8d28189b7 ]

In clear_flush(), the original pte may be a present entry, so we should
use ptep_clear() to let page_table_check track the pte clearing operation,
otherwise it may cause false positive in subsequent set_pte_at().

Link: https://lkml.kernel.org/r/20230810093241.1181142-1-qi.zheng@linux.dev
Fixes: 42b2547137f5 ("arm64/mm: enable ARCH_SUPPORTS_PAGE_TABLE_CHECK")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: btusb: Do not call kfree_skb() under spin_lock_irqsave()

[ Upstream commit 2a05334d7f91ff189692089c05fc48cc1d8204de ]

It is not allowed to call kfree_skb() from hardware interrupt
context or with hardware interrupts being disabled.
So replace kfree_skb() with dev_kfree_skb_irq() under
spin_lock_irqsave(). Compile tested only.

Fixes: baac6276c0a9 ("Bluetooth: btusb: handle mSBC audio over USB Endpoints")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mwifiex: avoid possible NULL skb pointer dereference

[ Upstream commit 35a7a1ce7c7d61664ee54f5239a1f120ab95a87e ]

In 'mwifiex_handle_uap_rx_forward()', always check the value
returned by 'skb_copy()' to avoid potential NULL pointer
dereference in 'mwifiex_uap_queue_bridged_pkt()', and drop
original skb in case of copying failure.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 838e4f449297 ("mwifiex: improve uAP RX handling")
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230814095041.16416-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: make ieee80211_tx_info padding explicit

[ Upstream commit a7a2ef0c4b3efbd7d6f3fabd87dbbc0b3f2de5af ]

While looking at a bug, I got rather confused by the layout of the
'status' field in ieee80211_tx_info. Apparently, the intention is that
status_driver_data[] is used for driver specific data, and fills up the
size of the union to 40 bytes, just like the other ones.

This is indeed what actually happens, but only because of the
combination of two mistakes:

 - "void *status_driver_data[18 / sizeof(void *)];" is intended
   to be 18 bytes long but is actually two bytes shorter because of
   rounding-down in the division, to a multiple of the pointer
   size (4 bytes or 8 bytes).

 - The other fields combined are intended to be 22 bytes long, but
   are actually 24 bytes because of padding in front of the
   unaligned tx_time member, and in front of the pointer array.

The two mistakes cancel out. so the size ends up fine, but it seems
more helpful to make this explicit, by having a multiple of 8 bytes
in the size calculation and explicitly describing the padding.

Fixes: ea5907db2a9cc ("mac80211: fix struct ieee80211_tx_info size")
Fixes: 02219b3abca59 ("mac80211: add WMM admission control support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230623152443.2296825-2-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: nl80211/cfg80211: add forgotten nla_policy for BSS color attribute

[ Upstream commit 218d690c49b7e9c94ad0d317adbdd4af846ea0dc ]

The previous commit dd3e4fc75b4a ("nl80211/cfg80211: add BSS color to
NDP ranging parameters") adds a parameter for NDP ranging by introducing
a new attribute type named NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR.

However, the author forgot to also describe the nla_policy at
nl80211_pmsr_ftm_req_attr_policy (net/wireless/nl80211.c). Just
complement it to avoid malformed attribute that causes out-of-attribute
access.

Fixes: dd3e4fc75b4a ("nl80211/cfg80211: add BSS color to NDP ranging parameters")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809033151.768910-1-linma@zju.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath9k: protect WMI command response buffer replacement with a lock

[ Upstream commit 454994cfa9e4c18b6df9f78b60db8eadc20a6c25 ]

If ath9k_wmi_cmd() has exited with a timeout, it is possible that during
next ath9k_wmi_cmd() call the wmi_rsp callback for previous wmi command
writes to new wmi->cmd_rsp_buf and makes a completion. This results in an
invalid ath9k_wmi_cmd() return value.

Move the replacement of WMI command response buffer and length under
wmi_lock. Note that last_seq_id value is updated there, too.

Thus, the buffer cannot be written to by a belated wmi_rsp callback
because that path is properly rejected by the last_seq_id check.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230425192607.18015-2-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: ath9k: fix races between ath9k_wmi_cmd and ath9k_wmi_ctrl_rx

[ Upstream commit b674fb513e2e7a514fcde287c0f73915d393fdb6 ]

Currently, the synchronization between ath9k_wmi_cmd() and
ath9k_wmi_ctrl_rx() is exposed to a race condition which, although being
rather unlikely, can lead to invalid behaviour of ath9k_wmi_cmd().

Consider the following scenario:

CPU0 CPU1

ath9k_wmi_cmd(...)
  mutex_lock(&wmi->op_mutex)
  ath9k_wmi_cmd_issue(...)
  wait_for_completion_timeout(...)
  ---
  timeout
  ---
/* the callback is being processed
 * before last_seq_id became zero
 */
ath9k_wmi_ctrl_rx(...)
  spin_lock_irqsave(...)
  /* wmi->last_seq_id check here
   * doesn't detect timeout yet
   */
  spin_unlock_irqrestore(...)
  /* last_seq_id is zeroed to
   * indicate there was a timeout
   */
  wmi->last_seq_id = 0
  mutex_unlock(&wmi->op_mutex)
  return -ETIMEDOUT

ath9k_wmi_cmd(...)
  mutex_lock(&wmi->op_mutex)
  /* the buffer is replaced with
   * another one
   */
  wmi->cmd_rsp_buf = rsp_buf
  wmi->cmd_rsp_len = rsp_len
  ath9k_wmi_cmd_issue(...)
    spin_lock_irqsave(...)
    spin_unlock_irqrestore(...)
  wait_for_completion_timeout(...)
/* the continuation of the
 * callback left after the first
 * ath9k_wmi_cmd call
 */
  ath9k_wmi_rsp_callback(...)
    /* copying data designated
     * to already timeouted
     * WMI command into an
     * inappropriate wmi_cmd_buf
     */
    memcpy(...)
    complete(&wmi->cmd_wait)
  /* awakened by the bogus callback
   * => invalid return result
   */
  mutex_unlock(&wmi->op_mutex)
  return 0

To fix this, update last_seq_id on timeout path inside ath9k_wmi_cmd()
under the wmi_lock. Move ath9k_wmi_rsp_callback() under wmi_lock inside
ath9k_wmi_ctrl_rx() so that the wmi->cmd_wait can be completed only for
initially designated wmi_cmd call, otherwise the path would be rejected
with last_seq_id check.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230425192607.18015-1-pchelkin@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples/bpf: fix broken map lookup probe

[ Upstream commit d93a7cf6ca2cfcd7de5d06f753ce8d5e863316ac ]

In the commit 7c4cd051add3 ("bpf: Fix syscall's stackmap lookup
potential deadlock"), a potential deadlock issue was addressed, which
resulted in *_map_lookup_elem not triggering BPF programs.
(prior to lookup, bpf_disable_instrumentation() is used)

To resolve the broken map lookup probe using "htab_map_lookup_elem",
this commit introduces an alternative approach. Instead, it utilize
"bpf_map_copy_value" and apply a filter specifically for the hash table
with map_type.

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Fixes: 7c4cd051add3 ("bpf: Fix syscall's stackmap lookup potential deadlock")
Link: https://lore.kernel.org/r/20230818090119.477441-8-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples/bpf: fix bio latency check with tracepoint

[ Upstream commit 92632115fb57ff9e368f256913e96d6fd5abf5ab ]

Recently, a new tracepoint for the block layer, specifically the
block_io_start/done tracepoints, was introduced in commit 5a80bd075f3b
("block: introduce block_io_start/block_io_done tracepoints").

Previously, the kprobe entry used for this purpose was quite unstable
and inherently broke relevant probes [1]. Now that a stable tracepoint
is available, this commit replaces the bio latency check with it.

One of the changes made during this replacement is the key used for the
hash table. Since 'struct request' cannot be used as a hash key, the
approach taken follows that which was implemented in bcc/biolatency [2].
(uses dev:sector for the key)

[1]: https://github.com/iovisor/bcc/issues/4261
[2]: https://github.com/iovisor/bcc/pull/4691

Fixes: 450b7879e345 ("block: move blk_account_io_{start,done} to blk-mq.c")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Link: https://lore.kernel.org/r/20230818090119.477441-7-danieltimlee@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Add .dts files missing from the build

[ Upstream commit 86684c2481b6e6a46c2282acee13554e34e66071 ]

Comparing .dts files to built .dtb files yielded a few .dts files which
are never built. Add them to the build.

Signed-off-by: Rob Herring <robh@kernel.org>
Stable-dep-of: 92632115fb57 ("samples/bpf: fix bio latency check with tracepoint")
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mwifiex: Fix missed return in oob checks failed path

[ Upstream commit 2785851c627f2db05f9271f7f63661b5dbd95c4c ]

Add missed return in mwifiex_uap_queue_bridged_pkt() and
mwifiex_process_rx_packet().

Fixes: 119585281617 ("wifi: mwifiex: Fix OOB and integer underflow when rx packets")
Signed-off-by: Polaris Pi <pinkperfect2021@gmail.com>
Reported-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230810083911.3725248-1-pinkperfect2021@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mwifiex: fix memory leak in mwifiex_histogram_read()

[ Upstream commit 9c8fd72a5c2a031cbc680a2990107ecd958ffcdb ]

Always free the zeroed page on return from 'mwifiex_histogram_read()'.

Fixes: cbf6e05527a7 ("mwifiex: add rx histogram statistics support")
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230802160726.85545-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: annotate data-races around sk->sk_lingertime

[ Upstream commit bc1fb82ae11753c5dec53c667a055dc37796dbd2 ]

sk_getsockopt() runs locklessly. This means sk->sk_lingertime
can be read while other threads are changing its value.

Other reads also happen without socket lock being held,
and must be annotated.

Remove preprocessor logic using BITS_PER_LONG, compilers
are smart enough to figure this by themselves.

v2: fixed a clang W=1 (-Wtautological-constant-out-of-range-compare) warning
    (Jakub)

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs: ocfs2: namei: check return value of ocfs2_add_entry()

[ Upstream commit 6b72e5f9e79360fce4f2be7fe81159fbdf4256a5 ]

Process result of ocfs2_add_entry() in case we have an error
value.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Link: https://lkml.kernel.org/r/20230803145417.177649-1-artem.chernyshev@red-soft.ru
Fixes: ccd979bdbce9 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Kurt Hackel <kurt.hackel@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lwt: Check LWTUNNEL_XMIT_CONTINUE strictly

[ Upstream commit a171fbec88a2c730b108c7147ac5e7b2f5a02b47 ]

LWTUNNEL_XMIT_CONTINUE is implicitly assumed in ip(6)_finish_output2,
such that any positive return value from a xmit hook could cause
unexpected continue behavior, despite that related skb may have been
freed. This could be error-prone for future xmit hook ops. One of the
possible errors is to return statuses of dst_output directly.

To make the code safer, redefine LWTUNNEL_XMIT_CONTINUE value to
distinguish from dst_output statuses and check the continue
condition explicitly.

Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/96b939b85eda00e8df4f7c080f770970a4c5f698.1692326837.git.yan@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

lwt: Fix return values of BPF xmit ops

[ Upstream commit 29b22badb7a84b783e3a4fffca16f7768fb31205 ]

BPF encap ops can return different types of positive values, such like
NET_RX_DROP, NET_XMIT_CN, NETDEV_TX_BUSY, and so on, from function
skb_do_redirect and bpf_lwt_xmit_reroute. At the xmit hook, such return
values would be treated implicitly as LWTUNNEL_XMIT_CONTINUE in
ip(6)_finish_output2. When this happens, skbs that have been freed would
continue to the neighbor subsystem, causing use-after-free bug and
kernel crashes.

To fix the incorrect behavior, skb_do_redirect return values can be
simply discarded, the same as tc-egress behavior. On the other hand,
bpf_lwt_xmit_reroute returns useful errors to local senders, e.g. PMTU
information. Thus convert its return values to avoid the conflict with
LWTUNNEL_XMIT_CONTINUE.

Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure")
Reported-by: Jordan Griege <jgriege@cloudflare.com>
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Suggested-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/0d2b878186cfe215fec6b45769c1cd0591d3628d.1692326837.git.yan@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwrng: iproc-rng200 - Implement suspend and resume calls

[ Upstream commit 8e03dd62e5be811efbf0cbeba47e79e793519105 ]

Chips such as BCM7278 support system wide suspend/resume which will
cause the HWRNG block to lose its state and reset to its power on reset
register values. We need to cleanup and re-initialize the HWRNG for it
to be functional coming out of a system suspend cycle.

Fixes: c3577f6100ca ("hwrng: iproc-rng200 - Add support for BCM7278")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: caam - fix unchecked return value error

[ Upstream commit e30685204711a6be40dec2622606950ccd37dafe ]

error:
Unchecked return value (CHECKED_RETURN)
check_return: Calling sg_miter_next without checking return value

fix:
added check if(!sg_miter_next)

Fixes: 8a2a0dd35f2e ("crypto: caam - strip input zeros from RSA input buffer")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: ice_aq_check_events: fix off-by-one check when filling buffer

[ Upstream commit e1e8a142c43336e3d25bfa1cb3a4ae7d00875c48 ]

Allow task's event buffer to be filled also in the case that it's size
is exactly the size of the message.

Fixes: d69ea414c9b4 ("ice: implement device flash update via devlink")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net-memcg: Fix scope of sockmem pressure indicators

[ Upstream commit ac8a52962164a50e693fa021d3564d7745b83a7f ]

Now there are two indicators of socket memory pressure sit inside
struct mem_cgroup, socket_pressure and tcpmem_pressure, indicating
memory reclaim pressure in memcg->memory and ->tcpmem respectively.

When in legacy mode (cgroupv1), the socket memory is charged into
->tcpmem which is independent of ->memory, so socket_pressure has
nothing to do with socket's pressure at all. Things could be worse
by taking socket_pressure into consideration in legacy mode, as a
pressure in ->memory can lead to premature reclamation/throttling
in socket.

While for the default mode (cgroupv2), the socket memory is charged
into ->memory, and ->tcpmem/->tcpmem_pressure are simply not used.

So {socket,tcpmem}_pressure are only used in default/legacy mode
respectively for indicating socket memory pressure. This patch fixes
the pieces of code that make mixed use of both.

Fixes: 8e8ae645249b ("mm: memcontrol: hook up vmpressure to socket pressure")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Clean up fmod_ret in bench_rename test script

[ Upstream commit 83a89c4b6ae93481d3f618aba6a29d89208d26ed ]

Running the bench_rename test script, the following error occurs:

  # ./benchs/run_bench_rename.sh
  base      :    0.819 ± 0.012M/s
  kprobe    :    0.538 ± 0.009M/s
  kretprobe :    0.503 ± 0.004M/s
  rawtp     :    0.779 ± 0.020M/s
  fentry    :    0.726 ± 0.007M/s
  fexit     :    0.691 ± 0.007M/s
  benchmark 'rename-fmodret' not found

The bench_rename_fmodret has been removed in commit b000def2e052
("selftests: Remove fmod_ret from test_overhead"), thus remove it
from the runners in the test script.

Fixes: b000def2e052 ("selftests: Remove fmod_ret from test_overhead")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230814030727.3010390-1-zouyipeng@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Fix repeat option when kfunc_call verification fails

[ Upstream commit 811915db674f8daf19bb4fcb67da9017235ce26d ]

There is no way where topts.repeat can be set to 1 when tc_test fails.
Fix the typo where the break statement slipped by one line.

Fixes: fb66223a244f ("selftests/bpf: add test for accessing ctx from syscall program type")
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/bpf/20230814031434.3077944-1-zouyipeng@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: tcp: fix unexcepted socket die when snd_wnd is 0

[ Upstream commit e89688e3e97868451a5d05b38a9d2633d6785cd4 ]

In tcp_retransmit_timer(), a window shrunk connection will be regarded
as timeout if 'tcp_jiffies32 - tp->rcv_tstamp > TCP_RTO_MAX'. This is not
right all the time.

The retransmits will become zero-window probes in tcp_retransmit_timer()
if the 'snd_wnd==0'. Therefore, the icsk->icsk_rto will come up to
TCP_RTO_MAX sooner or later.

However, the timer can be delayed and be triggered after 122877ms, not
TCP_RTO_MAX, as I tested.

Therefore, 'tcp_jiffies32 - tp->rcv_tstamp > TCP_RTO_MAX' is always true
once the RTO come up to TCP_RTO_MAX, and the socket will die.

Fix this by replacing the 'tcp_jiffies32' with '(u32)icsk->icsk_timeout',
which is exact the timestamp of the timeout.

However, "tp->rcv_tstamp" can restart from idle, then tp->rcv_tstamp
could already be a long time (minutes or hours) in the past even on the
first RTO. So we double check the timeout with the duration of the
retransmission.

Meanwhile, making "2 * TCP_RTO_MAX" as the timeout to avoid the socket
dying too soon.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/netdev/CADxym3YyMiO+zMD4zj03YPM3FBi-1LHi6gSD2XT8pyAMM096pg@mail.gmail.com/
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_add_adv_monitor()

[ Upstream commit a2bcd2b63271a93a695fabbfbf459c603d956d48 ]

KSAN reports use-after-free in hci_add_adv_monitor().

While adding an adv monitor,
    hci_add_adv_monitor() calls ->
    msft_add_monitor_pattern() calls ->
    msft_add_monitor_sync() calls ->
    msft_le_monitor_advertisement_cb() calls in an error case ->
    hci_free_adv_monitor() which frees the *moniter.

This is referenced by bt_dev_dbg() in hci_add_adv_monitor().

Fix the bt_dev_dbg() by using handle instead of monitor->handle.

Fixes: b747a83690c8 ("Bluetooth: hci_sync: Refactor add Adv Monitor")
Signed-off-by: Manish Mandlik <mmandlik@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_sync: Don't double print name in add/remove adv_monitor

[ Upstream commit 6f55eea116ba3646fb5fbb31de703f8cf79d8214 ]

The hci_add_adv_monitor() hci_remove_adv_monitor() functions call
bt_dev_dbg() to print some debug statements. The bt_dev_dbg() macro
automatically adds in the device's name. That means that we shouldn't
include the name in the bt_dev_dbg() calls.

Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: a2bcd2b63271 ("Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_add_adv_monitor()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Fix potential use-after-free when clear keys

[ Upstream commit 3673952cf0c6cf81b06c66a0b788abeeb02ff3ae ]

Similar to commit c5d2b6fa26b5 ("Bluetooth: Fix use-after-free in
hci_remove_ltk/hci_remove_irk"). We can not access k after kfree_rcu()
call.

Fixes: d7d41682efc2 ("Bluetooth: Fix Suspicious RCU usage warnings")
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: nokia: fix value check in nokia_bluetooth_serdev_probe()

[ Upstream commit e8b5aed31355072faac8092ead4938ddec3111fd ]

in nokia_bluetooth_serdev_probe(), check the return value of
clk_prepare_enable() and return the error code if
clk_prepare_enable() returns an unexpected value.

Fixes: 7bb318680e86 ("Bluetooth: add nokia driver")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: api - Use work queue in crypto_destroy_instance

[ Upstream commit 9ae4577bc077a7e32c3c7d442c95bc76865c0f17 ]

The function crypto_drop_spawn expects to be called in process
context.  However, when an instance is unregistered while it still
has active users, the last user may cause the instance to be freed
in atomic context.

Fix this by delaying the freeing to a work queue.

Fixes: 6bfd48096ff8 ("[CRYPTO] api: Added spawns")
Reported-by: Florent Revest <revest@chromium.org>
Reported-by: syzbot+d769eed29cc42d75e2a3@syzkaller.appspotmail.com
Reported-by: syzbot+610ec0671f51e838436e@syzkaller.appspotmail.com
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Florent Revest <revest@chromium.org>
Acked-by: Florent Revest <revest@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: stm32 - Properly handle pm_runtime_get failing

[ Upstream commit aec48805163338f8413118796c1dd035661b9140 ]

If pm_runtime_get() (disguised as pm_runtime_resume_and_get()) fails, this
means the clk wasn't prepared and enabled. Returning early in this case
however is wrong as then the following resource frees are skipped and this
is never catched up. So do all the cleanups but clk_disable_unprepare().

Also don't emit a warning, as stm32_hash_runtime_resume() already emitted
one.

Note that the return value of stm32_hash_remove() is mostly ignored by
the device core. The only effect of returning zero instead of an error
value is to suppress another warning in platform_remove(). So return 0
even if pm_runtime_resume_and_get() failed.

Fixes: 8b4d566de6a5 ("crypto: stm32/hash - Add power management support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: rust_is_available: fix confusion when a version appears in the path

[ Upstream commit 9eb7e20e0c5cd069457845f965b3e8a7d736ecb7 ]

`bindgen`'s output for `libclang`'s version check contains paths, which
in turn may contain strings that look like version numbers [1][2]:

    .../6.1.0-dev/.../rust_is_available_bindgen_libclang.h:2:9: warning: clang version 11.1.0  [-W#pragma-messages], err: false

which the script will pick up as the version instead of the latter.

It is also the case that versions may appear after the actual version
(e.g. distribution's version text), which was the reason behind `head` [3]:

    .../rust-is-available-bindgen-libclang.h:2:9: warning: clang version 13.0.0 (Fedora 13.0.0-3.fc35) [-W#pragma-messages], err: false

Thus instead ask for a match after the `clang version` string.

Reported-by: Jordan Isaacs <mail@jdisaacs.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/942 [1]
Reported-by: "Ethan D. Twardy" <ethan.twardy@gmail.com>
Closes: https://lore.kernel.org/rust-for-linux/20230528131802.6390-2-ethan.twardy@gmail.com/ [2]
Reported-by: Tiago Lam <tiagolam@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/pull/789 [3]
Fixes: 78521f3399ab ("scripts: add `rust_is_available.sh`")
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Ethan Twardy <ethan.twardy@gmail.com>
Tested-by: Ethan Twardy <ethan.twardy@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230616001631.463536-8-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: rust_is_available: add check for `bindgen` invocation

[ Upstream commit 52cae7f28ed6c3992489f16bb355f5b623f0912e ]

`scripts/rust_is_available.sh` calls `bindgen` with a special
header in order to check whether the `libclang` version in use
is suitable.

However, the invocation itself may fail if, for instance, `bindgen`
cannot locate `libclang`. This is fine for Kconfig (since the
script will still fail and therefore disable Rust as it should),
but it is pretty confusing for users of the `rustavailable` target
given the error will be unrelated:

    ./scripts/rust_is_available.sh: 21: arithmetic expression: expecting primary: "100000 *  + 100 *  + "
    make: *** [Makefile:1816: rustavailable] Error 2

Instead, run the `bindgen` invocation independently in a previous
step, saving its output and return code. If it fails, then show
the user a proper error message. Otherwise, continue as usual
with the saved output.

Since the previous patch we show a reference to the docs, and
the docs now explain how `bindgen` looks for `libclang`,
thus the error message can leverage the documentation, avoiding
duplication here (and making users aware of the setup guide in
the documentation).

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/rust-for-linux/CAKwvOdm5JT4wbdQQYuW+RT07rCi6whGBM2iUAyg8A1CmLXG6Nw@mail.gmail.com/
Reported-by: François Valenduc <francoisvalenduc@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/issues/934
Reported-by: Alexandru Radovici <msg4alex@gmail.com>
Closes: https://github.com/Rust-for-Linux/linux/pull/921
Reported-by: Matthew Leach <dev@mattleach.net>
Closes: https://lore.kernel.org/rust-for-linux/20230507084116.1099067-1-dev@mattleach.net/
Fixes: 78521f3399ab ("scripts: add `rust_is_available.sh`")
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230616001631.463536-6-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: rust_is_available: fix version check when CC has multiple arguments

[ Upstream commit dee3a6b819c96fc8b1907577f585fd66f5c0fefe ]

rust_is_available.sh uses cc-version.sh to identify which C compiler is
in use, as scripts/Kconfig.include does.  cc-version.sh isn't designed to
be able to handle multiple arguments in one variable, i.e. "ccache clang".
Its invocation in rust_is_available.sh quotes "$CC", which makes
$1 == "ccache clang" instead of the intended $1 == ccache & $2 == clang.

cc-version.sh could also be changed to handle having "ccache clang" as one
argument, but it only has the one consumer upstream, making it simpler to
fix the caller here.

Signed-off-by: Russell Currey <ruscur@russell.cc>
Fixes: 78521f3399ab ("scripts: add `rust_is_available.sh`")
Link: https://github.com/Rust-for-Linux/linux/pull/873
[ Reworded title prefix and reflow line to 75 columns. ]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230616001631.463536-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: rust_is_available: remove -v option

[ Upstream commit d824d2f98565e7c4cb1b862c230198fbe1a968be ]

The -v option is passed when this script is invoked from Makefile,
but not when invoked from Kconfig.

As you can see in scripts/Kconfig.include, the 'success' macro suppresses
stdout and stderr anyway, so this script does not need to be quiet.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230109061436.3146442-1-masahiroy@kernel.org
[ Reworded prefix to match the others in the patch series. ]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230616001631.463536-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Stable-dep-of: dee3a6b819c9 ("kbuild: rust_is_available: fix version check when CC has multiple arguments")
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: fix static assert compilation issue for test_cls_*.c

[ Upstream commit 416c6d01244ecbf0abfdb898fd091b50ef951b48 ]

commit bdeeed3498c7 ("libbpf: fix offsetof() and container_of() to work with CO-RE")

...was backported to stable trees such as 5.15. The problem is that with older
LLVM/clang (14/15) - which is often used for older kernels - we see compilation
failures in BPF selftests now:

In file included from progs/test_cls_redirect_subprogs.c:2:
progs/test_cls_redirect.c:90:2: error: static assertion expression is not an integral constant expression
        sizeof(flow_ports_t) !=
        ^~~~~~~~~~~~~~~~~~~~~~~
progs/test_cls_redirect.c:91:3: note: cast that performs the conversions of a reinterpret_cast is not allowed in a constant expression
                offsetofend(struct bpf_sock_tuple, ipv4.dport) -
                ^
progs/test_cls_redirect.c:32:3: note: expanded from macro 'offsetofend'
        (offsetof(TYPE, MEMBER) + sizeof((((TYPE *)0)->MEMBER)))
         ^
tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:86:33: note: expanded from macro 'offsetof'
                                 ^
In file included from progs/test_cls_redirect_subprogs.c:2:
progs/test_cls_redirect.c:95:2: error: static assertion expression is not an integral constant expression
        sizeof(flow_ports_t) !=
        ^~~~~~~~~~~~~~~~~~~~~~~
progs/test_cls_redirect.c:96:3: note: cast that performs the conversions of a reinterpret_cast is not allowed in a constant expression
                offsetofend(struct bpf_sock_tuple, ipv6.dport) -
                ^
progs/test_cls_redirect.c:32:3: note: expanded from macro 'offsetofend'
        (offsetof(TYPE, MEMBER) + sizeof((((TYPE *)0)->MEMBER)))
         ^
tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:86:33: note: expanded from macro 'offsetof'
                                 ^
2 errors generated.
make: *** [Makefile:594: tools/testing/selftests/bpf/test_cls_redirect_subprogs.bpf.o] Error 1

The problem is the new offsetof() does not play nice with static asserts.
Given that the context is a static assert (and CO-RE relocation is not
needed at compile time), offsetof() usage can be replaced by restoring
the original offsetof() definition as __builtin_offsetof().

Fixes: bdeeed3498c7 ("libbpf: fix offsetof() and container_of() to work with CO-RE")
Reported-by: Colm Harrington <colm.harrington@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Yipeng Zou <zouyipeng@huawei.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230802073906.3197480-1-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mwifiex: fix error recovery in PCIE buffer descriptor management

[ Upstream commit 288c63d5cb4667a51a04668b3e2bb0ea499bc5f4 ]

Add missing 'kfree_skb()' in 'mwifiex_init_rxq_ring()' and never do
'kfree(card->rxbd_ring_vbase)' because this area is DMAed and should
be released with 'dma_free_coherent()'. The latter is performed in
'mwifiex_pcie_delete_rxbd_ring()', which is now called to recover
from possible errors in 'mwifiex_pcie_create_rxbd_ring()'. Likewise
for 'mwifiex_pcie_init_evt_ring()', 'kfree(card->evtbd_ring_vbase)'
'mwifiex_pcie_delete_evtbd_ring()' and 'mwifiex_pcie_create_rxbd_ring()'.

Fixes: d930faee141b ("mwifiex: add support for Marvell pcie8766 chipset")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230731074334.56463-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mwifiex: Fix OOB and integer underflow when rx packets

[ Upstream commit 11958528161731c58e105b501ed60b83a91ea941 ]

Make sure mwifiex_process_mgmt_packet,
mwifiex_process_sta_rx_packet and mwifiex_process_uap_rx_packet,
mwifiex_uap_queue_bridged_pkt and mwifiex_process_rx_packet
not out-of-bounds access the skb->data buffer.

Fixes: 2dbaf751b1de ("mwifiex: report received management frames to cfg80211")
Signed-off-by: Polaris Pi <pinkperfect2021@gmail.com>
Reviewed-by: Matthew Wang <matthewmwang@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230723070741.1544662-1-pinkperfect2021@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: mt7915: fix power-limits while chan_switch

[ Upstream commit 6c0570bc21ec2073890aa252c8420ca7bec402e4 ]

If user changes the channel without completely disabling the interface the
txpower_sku values reported track the old channel the device was operating on.
If user bounces the interface the correct power tables are applied.

mt7915_sku_group_len array gets updated before the channel switch happens so it
uses data from the old channel.

Fixes: ecb187a74e18 ("mt76: mt7915: rework the flow of txpower setting")
Fixes: f1d962369d56 ("mt76: mt7915: implement HE per-rate tx power support")
Reported-By: Chad Monroe <chad.monroe@smartrg.com>
Tested-by: Chad Monroe <chad.monroe@smartrg.com>
Signed-off-by: Allen Ye <allen.ye@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: gs_usb: gs_usb_receive_bulk_callback(): count RX overflow errors also in case of OOM

[ Upstream commit 6c8bc15f02b85bc8f47074110d8fd8caf7a1e42d ]

In case of an RX overflow error from the CAN controller and an OOM
where no skb can be allocated, the error counters are not incremented.

Fix this by first incrementing the error counters and then allocate
the skb.

Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Link: https://lore.kernel.org/all/20230718-gs_usb-cleanups-v1-7-c3b9154ec605@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: tegra20-sflash: fix to check return value of platform_get_irq() in tegra_sflash_probe()

[ Upstream commit 29a449e765ff70a5bd533be94babb6d36985d096 ]

The platform_get_irq might be failed and return a negative result. So
there should have an error handling code.

Fixed this by adding an error handling code.

Fixes: 8528547bcc33 ("spi: tegra: add spi driver for sflash controller")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Link: https://lore.kernel.org/r/tencent_71FC162D589E4788C2152AAC84CD8D5C6D06@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: testmode: add nla_policy for MT76_TM_ATTR_TX_LENGTH

[ Upstream commit 74f12d511625e603fac8c0c2b6872e687e56dd61 ]

It seems that the nla_policy in mt76_tm_policy is missed for attribute
MT76_TM_ATTR_TX_LENGTH. This patch adds the correct description to make
sure the

  u32 val = nla_get_u32(tb[MT76_TM_ATTR_TX_LENGTH]);

in function mt76_testmode_cmd() is safe and will not result in
out-of-attribute read.

Fixes: f0efa8621550 ("mt76: add API for testmode support")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: reject unhashed sockets in bpf_sk_assign

[ Upstream commit 67312adc96b5a585970d03b62412847afe2c6b01 ]

The semantics for bpf_sk_assign are as follows:

    sk = some_lookup_func()
    bpf_sk_assign(skb, sk)
    bpf_sk_release(sk)

That is, the sk is not consumed by bpf_sk_assign. The function
therefore needs to make sure that sk lives long enough to be
consumed from __inet_lookup_skb. The path through the stack for a
TCPv4 packet is roughly:

  netif_receive_skb_core: takes RCU read lock
    __netif_receive_skb_core:
      sch_handle_ingress:
        tcf_classify:
          bpf_sk_assign()
      deliver_ptype_list_skb:
        deliver_skb:
          ip_packet_type->func == ip_rcv:
            ip_rcv_core:
            ip_rcv_finish_core:
              dst_input:
                ip_local_deliver:
                  ip_local_deliver_finish:
                    ip_protocol_deliver_rcu:
                      tcp_v4_rcv:
                        __inet_lookup_skb:
                          skb_steal_sock

The existing helper takes advantage of the fact that everything
happens in the same RCU critical section: for sockets with
SOCK_RCU_FREE set bpf_sk_assign never takes a reference.
skb_steal_sock then checks SOCK_RCU_FREE again and does sock_put
if necessary.

This approach assumes that SOCK_RCU_FREE is never set on a sk
between bpf_sk_assign and skb_steal_sock, but this invariant is
violated by unhashed UDP sockets. A new UDP socket is created
in TCP_CLOSE state but without SOCK_RCU_FREE set. That flag is only
added in udp_lib_get_port() which happens when a socket is bound.

When bpf_sk_assign was added it wasn't possible to access unhashed
UDP sockets from BPF, so this wasn't a problem. This changed
in commit 0c48eefae712 ("sock_map: Lift socket state restriction
for datagram sockets"), but the helper wasn't adjusted accordingly.
The following sequence of events will therefore lead to a refcount
leak:

1. Add socket(AF_INET, SOCK_DGRAM) to a sockmap.
2. Pull socket out of sockmap and bpf_sk_assign it. Since
   SOCK_RCU_FREE is not set we increment the refcount.
3. bind() or connect() the socket, setting SOCK_RCU_FREE.
4. skb_steal_sock will now set refcounted = false due to
   SOCK_RCU_FREE.
5. tcp_v4_rcv() skips sock_put().

Fix the problem by rejecting unhashed sockets in bpf_sk_assign().
This matches the behaviour of __inet_lookup_skb which is ultimately
the goal of bpf_sk_assign().

Fixes: cf7fbe660f2d ("bpf: Add socket assign support")
Cc: Joe Stringer <joe@cilium.io>
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230720-so-reuseport-v6-2-7021b683cdae@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

udp: re-score reuseport groups when connected sockets are present

[ Upstream commit f0ea27e7bfe1c34e1f451a63eb68faa1d4c3a86d ]

Contrary to TCP, UDP reuseport groups can contain TCP_ESTABLISHED
sockets. To support these properly we remember whether a group has
a connected socket and skip the fast reuseport early-return. In
effect we continue scoring all reuseport sockets and then choose the
one with the highest score.

The current code fails to re-calculate the score for the result of
lookup_reuseport. According to Kuniyuki Iwashima:

    1) SO_INCOMING_CPU is set
       -> selected sk might have +1 score

    2) BPF prog returns ESTABLISHED and/or SO_INCOMING_CPU sk
       -> selected sk will have more than 8

  Using the old score could trigger more lookups depending on the
  order that sockets are created.

    sk -> sk (SO_INCOMING_CPU) -> sk (ESTABLISHED)
    |     |
    `-> select the next SO_INCOMING_CPU sk
          |
          `-> select itself (We should save this lookup)

Fixes: efc6b6f6c311 ("udp: Improve load balancing for SO_REUSEPORT.")
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/r/20230720-so-reuseport-v6-1-7021b683cdae@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mt76: mt7921: fix non-PSC channel scan fail

[ Upstream commit 0e5911bb7cc92c00dda9b4d635c1266b7ca915c6 ]

Due to the scan command may only request legacy bands and PSC channel
in 6GHz band, we are unable to scan the APs on non-PSC channel in this
case. Enable WIPHY_FLAG_SPLIT_SCAN_6GHZ to support non-PSC channel
(obtained during scan on legacy bands) in 6GHz scan request.

Fixes: 50ac15a511e3 ("mt76: mt7921: add 6GHz support")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtw89: debug: Fix error handling in rtw89_debug_priv_btc_manual_set()

[ Upstream commit 59b4cc439f184c5eaa34161ec67af1e16ffabed4 ]

If there is a failure during kstrtobool_from_user()
rtw89_debug_priv_btc_manual_set should return a negative error code
instead of returning the count directly.

Fix this bug by returning an error code instead of a count after
a failed call of the function "kstrtobool_from_user". Moreover
I omitted the label "out" with this source code correction.

Fixes: e3ec7017f6a2 ("rtw89: add Realtek 802.11ax driver")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/tencent_1C09B99BD7DA9CAD18B00C8F0F050F540607@qq.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

regmap: rbtree: Use alloc_flags for memory allocations

[ Upstream commit 0c8b0bf42c8cef56f7cd9cd876fbb7ece9217064 ]

The kunit tests discovered a sleeping in atomic bug.  The allocations
in the regcache-rbtree code should use the map->alloc_flags instead of
GFP_KERNEL.

[    5.005510] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306
[    5.005960] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 117, name: kunit_try_catch
[    5.006219] preempt_count: 1, expected: 0
[    5.006414] 1 lock held by kunit_try_catch/117:
[    5.006590]  #0: 833b9010 (regmap_kunit:86:(config)->lock){....}-{2:2}, at: regmap_lock_spinlock+0x14/0x1c
[    5.007493] irq event stamp: 162
[    5.007627] hardirqs last  enabled at (161): [<80786738>] crng_make_state+0x1a0/0x294
[    5.007871] hardirqs last disabled at (162): [<80c531ec>] _raw_spin_lock_irqsave+0x7c/0x80
[    5.008119] softirqs last  enabled at (0): [<801110ac>] copy_process+0x810/0x2138
[    5.008356] softirqs last disabled at (0): [<00000000>] 0x0
[    5.008688] CPU: 0 PID: 117 Comm: kunit_try_catch Tainted: G                 N 6.4.4-rc3-g0e8d2fdfb188 #1
[    5.009011] Hardware name: Generic DT based system
[    5.009277]  unwind_backtrace from show_stack+0x18/0x1c
[    5.009497]  show_stack from dump_stack_lvl+0x38/0x5c
[    5.009676]  dump_stack_lvl from __might_resched+0x188/0x2d0
[    5.009860]  __might_resched from __kmem_cache_alloc_node+0x1dc/0x25c
[    5.010061]  __kmem_cache_alloc_node from kmalloc_trace+0x30/0xc8
[    5.010254]  kmalloc_trace from regcache_rbtree_write+0x26c/0x468
[    5.010446]  regcache_rbtree_write from _regmap_write+0x88/0x140
[    5.010634]  _regmap_write from regmap_write+0x44/0x68
[    5.010803]  regmap_write from basic_read_write+0x8c/0x270
[    5.010980]  basic_read_write from kunit_try_run_case+0x48/0xa0

Fixes: 28644c809f44 ("regmap: Add the rbtree cache support")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/ee59d128-413c-48ad-a3aa-d9d350c80042@roeck-us.net/
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/58f12a07-5f4b-4a8f-ab84-0a42d1908cb9@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwrng: pic32 - use devm_clk_get_enabled

[ Upstream commit 6755ad74aac0fb1c79b14724feb81b2f6ff25847 ]

Use devm_clk_get_enabled in the pic32 driver. Ensure that the clock is
enabled as long as the driver is registered with the hwrng core.

Fixes: 7ea39973d1e5 ("hwrng: pic32 - Use device-managed registration API")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwrng: nomadik - keep clock enabled while hwrng is registered

[ Upstream commit 039980de89dc9dd757418d6f296e4126cc3f86c3 ]

The nomadik driver uses devres to register itself with the hwrng core,
the driver will be unregistered from hwrng when its device goes out of
scope. This happens after the driver's remove function is called.

However, nomadik's clock is disabled in the remove function. There's a
short timeframe where nomadik is still registered with the hwrng core
although its clock is disabled. I suppose the clock must be active to
access the hardware and serve requests from the hwrng core.

Switch to devm_clk_get_enabled and let devres disable the clock and
unregister the hwrng. This avoids the race condition.

Fixes: 3e75241be808 ("hwrng: drivers - Use device-managed registration API")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: tcp_enter_quickack_mode() should be static

[ Upstream commit 03b123debcbc8db987bda17ed8412cc011064c22 ]

After commit d2ccd7bc8acd ("tcp: avoid resetting ACK timer in DCTCP"),
tcp_enter_quickack_mode() is only used from net/ipv4/tcp_input.c.

Fixes: d2ccd7bc8acd ("tcp: avoid resetting ACK timer in DCTCP")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20230718162049.1444938-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - change value of default idle filter

[ Upstream commit 0f942bdfe9d463be3073301519492f8d53c6b2d5 ]

The power management configuration of 4xxx devices is too aggressive
and in some conditions the device might be prematurely put to a low
power state.
Increase the idle filter value to prevent that.
In future, this will be set by firmware.

Fixes: e5745f34113b ("crypto: qat - enable power management for QAT GEN4")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Fix an error in verifying a field in a union

[ Upstream commit 33937607efa050d9e237e0c4ac4ada02d961c466 ]

We are utilizing BPF LSM to monitor BPF operations within our container
environment. When we add support for raw_tracepoint, it hits below
error.

; (const void *)attr->raw_tracepoint.name);
27: (79) r3 = *(u64 *)(r2 +0)
access beyond the end of member map_type (mend:4) in struct (anon) with off 0 size 8

It can be reproduced with below BPF prog.

SEC("lsm/bpf")
int BPF_PROG(bpf_audit, int cmd, union bpf_attr *attr, unsigned int size)
{
switch (cmd) {
case BPF_RAW_TRACEPOINT_OPEN:
bpf_printk("raw_tracepoint is %s", attr->raw_tracepoint.name);
break;
default:
break;
}
return 0;
}

The reason is that when accessing a field in a union, such as bpf_attr,
if the field is located within a nested struct that is not the first
member of the union, it can result in incorrect field verification.

  union bpf_attr {
      struct {
          __u32 map_type; <<<< Actually it will find that field.
          __u32 key_size;
          __u32 value_size;
         ...
      };
      ...
      struct {
          __u64 name;    <<<< We want to verify this field.
          __u32 prog_fd;
      } raw_tracepoint;
  };

Considering the potential deep nesting levels, finding a perfect
solution to address this issue has proven challenging. Therefore, I
propose a solution where we simply skip the verification process if the
field in question is located within a union.

Fixes: 7e3617a72df3 ("bpf: Add array support to btf_struct_access")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20230713025642.27477-4-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: Clear the probe_addr for uprobe

[ Upstream commit 5125e757e62f6c1d5478db4c2b61a744060ddf3f ]

To avoid returning uninitialized or random values when querying the file
descriptor (fd) and accessing probe_addr, it is necessary to clear the
variable prior to its use.

Fixes: 41bdc4b40ed6 ("bpf: introduce bpf subcommand BPF_TASK_FD_QUERY")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230709025630.3735-6-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix realloc API handling in zero-sized edge cases

[ Upstream commit 8a0260dbf6553c969248b6530cafadac46562f47 ]

realloc() and reallocarray() can either return NULL or a special
non-NULL pointer, if their size argument is zero. This requires a bit
more care to handle NULL-as-valid-result situation differently from
NULL-as-error case. This has caused real issues before ([0]), and just
recently bit again in production when performing bpf_program__attach_usdt().

This patch fixes 4 places that do or potentially could suffer from this
mishandling of NULL, including the reported USDT-related one.

There are many other places where realloc()/reallocarray() is used and
NULL is always treated as an error value, but all those have guarantees
that their size is always non-zero, so those spot don't need any extra
handling.

  [0] d08ab82f59d5 ("libbpf: Fix double-free when linker processes empty sections")

Fixes: 999783c8bbda ("libbpf: Wire up spec management and other arch-independent USDT logic")
Fixes: b63b3c490eee ("libbpf: Add bpf_program__set_insns function")
Fixes: 697f104db8a6 ("libbpf: Support custom SEC() handlers")
Fixes: b12688267280 ("libbpf: Change the order of data and text relocations.")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230711024150.1566433-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpftool: Use a local bpf_perf_event_value to fix accessing its fields

[ Upstream commit 658ac06801315b739774a15796ff06913ef5cad5 ]

Fix the following error when building bpftool:

  CLANG   profiler.bpf.o
  CLANG   pid_iter.bpf.o
skeleton/profiler.bpf.c:18:21: error: invalid application of 'sizeof' to an incomplete type 'struct bpf_perf_event_value'
        __uint(value_size, sizeof(struct bpf_perf_event_value));
                           ^     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helpers.h:13:39: note: expanded from macro '__uint'
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helper_defs.h:7:8: note: forward declaration of 'struct bpf_perf_event_value'
struct bpf_perf_event_value;
       ^

struct bpf_perf_event_value is being used in the kernel only when
CONFIG_BPF_EVENTS is enabled, so it misses a BTF entry then.
Define struct bpf_perf_event_value___local with the
`preserve_access_index` attribute inside the pid_iter BPF prog to
allow compiling on any configs. It is a full mirror of a UAPI
structure, so is compatible both with and w/o CO-RE.
bpf_perf_event_read_value() requires a pointer of the original type,
so a cast is needed.

Fixes: 47c09d6a9f67 ("bpftool: Introduce "prog profile" command")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230707095425.168126-5-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpftool: Use a local copy of BPF_LINK_TYPE_PERF_EVENT in pid_iter.bpf.c

[ Upstream commit 44ba7b30e84fb40da2295e85a6d209e199fdc977 ]

In order to allow the BPF program in bpftool's pid_iter.bpf.c to compile
correctly on hosts where vmlinux.h does not define
BPF_LINK_TYPE_PERF_EVENT (running kernel versions lower than 5.15, for
example), define and use a local copy of the enum value. This requires
LLVM 12 or newer to build the BPF program.

Fixes: cbdaf71f7e65 ("bpftool: Add bpf_cookie to link output")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230707095425.168126-4-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpftool: Define a local bpf_perf_link to fix accessing its fields

[ Upstream commit 67a43462ee2405c94e985a747bdcb8e3a0d66203 ]

When building bpftool with !CONFIG_PERF_EVENTS:

skeleton/pid_iter.bpf.c:47:14: error: incomplete definition of type 'struct bpf_perf_link'
        perf_link = container_of(link, struct bpf_perf_link, link);
                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helpers.h:74:22: note: expanded from macro 'container_of'
                ((type *)(__mptr - offsetof(type, member)));    \
                                   ^~~~~~~~~~~~~~~~~~~~~~
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helpers.h:68:60: note: expanded from macro 'offsetof'
 #define offsetof(TYPE, MEMBER)  ((unsigned long)&((TYPE *)0)->MEMBER)
                                                  ~~~~~~~~~~~^
skeleton/pid_iter.bpf.c:44:9: note: forward declaration of 'struct bpf_perf_link'
        struct bpf_perf_link *perf_link;
               ^

&bpf_perf_link is being defined and used only under the ifdef.
Define struct bpf_perf_link___local with the `preserve_access_index`
attribute inside the pid_iter BPF prog to allow compiling on any
configs. CO-RE will substitute it with the real struct bpf_perf_link
accesses later on.
container_of() uses offsetof(), which does the necessary CO-RE
relocation if the field is specified with `preserve_access_index` - as
is the case for struct bpf_perf_link___local.

Fixes: cbdaf71f7e65 ("bpftool: Add bpf_cookie to link output")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230707095425.168126-3-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpftool: use a local copy of perf_event to fix accessing :: Bpf_cookie

[ Upstream commit 4cbeeb0dc02f8ac7b975b2ab0080ace53d43d62a ]

When CONFIG_PERF_EVENTS is not set, struct perf_event remains empty.
However, the structure is being used by bpftool indirectly via BTF.
This leads to:

skeleton/pid_iter.bpf.c:49:30: error: no member named 'bpf_cookie' in 'struct perf_event'
        return BPF_CORE_READ(event, bpf_cookie);
               ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~

...

skeleton/pid_iter.bpf.c:49:9: error: returning 'void' from a function with incompatible result type '__u64' (aka 'unsigned long long')
        return BPF_CORE_READ(event, bpf_cookie);
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Tools and samples can't use any CONFIG_ definitions, so the fields
used there should always be present.
Define struct perf_event___local with the `preserve_access_index`
attribute inside the pid_iter BPF prog to allow compiling on any
configs. CO-RE will substitute it with the real struct perf_event
accesses later on.

Fixes: cbdaf71f7e65 ("bpftool: Add bpf_cookie to link output")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230707095425.168126-2-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Fix bpf_nf failure upon test rerun

[ Upstream commit 17e8e5d6e09adb4b4f4fb5c89b3ec3fcae2c64a6 ]

Alexei reported:

  After fast forwarding bpf-next today bpf_nf test started to fail when
  run twice:

  $ ./test_progs -t bpf_nf
  #17      bpf_nf:OK
  Summary: 1/10 PASSED, 0 SKIPPED, 0 FAILED

  $ ./test_progs -t bpf_nf
  All error logs:
  test_bpf_nf_ct:PASS:test_bpf_nf__open_and_load 0 nsec
  test_bpf_nf_ct:PASS:iptables-legacy -t raw -A PREROUTING -j CONNMARK
  --set-mark 42/0 0 nsec
  (network_helpers.c:102: errno: Address already in use) Failed to bind socket
  test_bpf_nf_ct:FAIL:start_server unexpected start_server: actual -1 < expected 0
  #17/1    bpf_nf/xdp-ct:FAIL
  test_bpf_nf_ct:PASS:test_bpf_nf__open_and_load 0 nsec
  test_bpf_nf_ct:PASS:iptables-legacy -t raw -A PREROUTING -j CONNMARK
  --set-mark 42/0 0 nsec
  (network_helpers.c:102: errno: Address already in use) Failed to bind socket
  test_bpf_nf_ct:FAIL:start_server unexpected start_server: actual -1 < expected 0
  #17/2    bpf_nf/tc-bpf-ct:FAIL
  #17      bpf_nf:FAIL
  Summary: 0/8 PASSED, 0 SKIPPED, 1 FAILED

I was able to locally reproduce as well. Rearrange the connection teardown
so that the client closes its connection first so that we don't need to
linger in TCP time-wait.

Fixes: e81fbd4c1ba7 ("selftests/bpf: Add existing connection bpf_*_ct_lookup() test")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/CAADnVQ+0dnDq_v_vH1EfkacbfGnHANaon7zsw10pMb-D9FS0Pw@mail.gmail.com
Link: https://lore.kernel.org/bpf/20230626131942.5100-1-daniel@iogearbox.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit()

[ Upstream commit 03997da042dac73c69e60d91942c727c76828b65 ]

Since the 'cpus' field of policy structure will become empty in the
cpufreq core API, it is better to use 'related_cpus' in the exit()
callback of driver.

Fixes: c3274763bfc3 ("cpufreq: powernow-k8: Initialize per-cpu data-structures properly")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/efistub: Fix PCI ROM preservation in mixed mode

[ Upstream commit 8b94da92559f7e403dc7ab81937cc50f949ee2fd ]

preserve_pci_rom_image() was accessing the romsize field in
efi_pci_io_protocol_t directly instead of using the efi_table_attr()
helper. This prevents the ROM image from being saved correctly during a
mixed mode boot.

Fixes: 2c3625cb9fa2 ("efi/x86: Fold __setup_efi_pci32() and __setup_efi_pci64() into one function")
Signed-off-by: Mikel Rychliski <mikel@mikelr.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: amd-pstate-ut: Fix kernel panic when loading the driver

[ Upstream commit 60dd283804479c4a52f995b713f448e2cd65b8c8 ]

After loading the amd-pstate-ut driver, amd_pstate_ut_check_perf()
and amd_pstate_ut_check_freq() use cpufreq_cpu_get() to get the policy
of the CPU and mark it as busy.

In these functions, cpufreq_cpu_put() should be used to release the
policy, but it is not, so any other entity trying to access the policy
is blocked indefinitely.

One such scenario is when amd_pstate mode is changed, leading to the
following splat:

[ 1332.103727] INFO: task bash:2929 blocked for more than 120 seconds.
[ 1332.110001]       Not tainted 6.5.0-rc2-amd-pstate-ut #5
[ 1332.115315] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1332.123140] task:bash            state:D stack:0     pid:2929  ppid:2873   flags:0x00004006
[ 1332.123143] Call Trace:
[ 1332.123145]  <TASK>
[ 1332.123148]  __schedule+0x3c1/0x16a0
[ 1332.123154]  ? _raw_read_lock_irqsave+0x2d/0x70
[ 1332.123157]  schedule+0x6f/0x110
[ 1332.123160]  schedule_timeout+0x14f/0x160
[ 1332.123162]  ? preempt_count_add+0x86/0xd0
[ 1332.123165]  __wait_for_common+0x92/0x190
[ 1332.123168]  ? __pfx_schedule_timeout+0x10/0x10
[ 1332.123170]  wait_for_completion+0x28/0x30
[ 1332.123173]  cpufreq_policy_put_kobj+0x4d/0x90
[ 1332.123177]  cpufreq_policy_free+0x157/0x1d0
[ 1332.123178]  ? preempt_count_add+0x58/0xd0
[ 1332.123180]  cpufreq_remove_dev+0xb6/0x100
[ 1332.123182]  subsys_interface_unregister+0x114/0x120
[ 1332.123185]  ? preempt_count_add+0x58/0xd0
[ 1332.123187]  ? __pfx_amd_pstate_change_driver_mode+0x10/0x10
[ 1332.123190]  cpufreq_unregister_driver+0x3b/0xd0
[ 1332.123192]  amd_pstate_change_driver_mode+0x1e/0x50
[ 1332.123194]  store_status+0xe9/0x180
[ 1332.123197]  dev_attr_store+0x1b/0x30
[ 1332.123199]  sysfs_kf_write+0x42/0x50
[ 1332.123202]  kernfs_fop_write_iter+0x143/0x1d0
[ 1332.123204]  vfs_write+0x2df/0x400
[ 1332.123208]  ksys_write+0x6b/0xf0
[ 1332.123210]  __x64_sys_write+0x1d/0x30
[ 1332.123213]  do_syscall_64+0x60/0x90
[ 1332.123216]  ? fpregs_assert_state_consistent+0x2e/0x50
[ 1332.123219]  ? exit_to_user_mode_prepare+0x49/0x1a0
[ 1332.123223]  ? irqentry_exit_to_user_mode+0xd/0x20
[ 1332.123225]  ? irqentry_exit+0x3f/0x50
[ 1332.123226]  ? exc_page_fault+0x8e/0x190
[ 1332.123228]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 1332.123232] RIP: 0033:0x7fa74c514a37
[ 1332.123234] RSP: 002b:00007ffe31dd0788 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 1332.123238] RAX: ffffffffffffffda RBX: 0000000000000008 RCX: 00007fa74c514a37
[ 1332.123239] RDX: 0000000000000008 RSI: 000055e27c447aa0 RDI: 0000000000000001
[ 1332.123241] RBP: 000055e27c447aa0 R08: 00007fa74c5d1460 R09: 000000007fffffff
[ 1332.123242] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000008
[ 1332.123244] R13: 00007fa74c61a780 R14: 00007fa74c616600 R15: 00007fa74c615a00
[ 1332.123247]  </TASK>

Fix this by calling cpufreq_cpu_put() wherever necessary.

Fixes: 14eb1c96e3a3 ("cpufreq: amd-pstate: Add test module for amd-pstate driver")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Meng Li <li.meng@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Suggested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: amd-pstate-ut: Remove module parameter access

[ Upstream commit 8d6e5e8268e89979d86501dbb8385ce2e6154de1 ]

In amd-pstate-ut, shared memory-based systems call
get_shared_mem() as part of amd_pstate_ut_check_enabled()
function. This function was written when CONFIG_X86_AMD_PSTATE
was tristate config and amd_pstate can be built as a module.

Currently CONFIG_X86_AMD_PSTATE is a boolean config and module
parameter shared_mem is removed. But amd-pstate-ut code still
accesses this module parameter. Remove those accesses.

Fixes: 456ca88d8a52 ("cpufreq: amd-pstate: change amd-pstate driver to be built-in type")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Meng Li <li.meng@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Suggested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/of: Fix potential uninitialized value access

[ Upstream commit f96801f0cfcefc0a16b146596577c53c75ee9773 ]

If of_parse_phandle_with_args() called from __thermal_of_bind() or
__thermal_of_unbind() fails, cooling_spec.np will not be initialized,
so move the of_node_put() calls below the respective return value checks
to avoid dereferencing an uninitialized pointer.

Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: x86: s2idle: Fix a logic error parsing AMD constraints table

[ Upstream commit 9cc8cd086f05d9a01026c65c98da88561e9c619e ]

The constraints table should be resetting the `list` object
after running through all of `info_obj` iterations.

This adjusts whitespace as well as less code will now be included
with each loop. This fixes a functional problem is fixed where a
badly formed package in the inner loop may have incorrect data.

Fixes: 146f1ed852a8 ("ACPI: PM: s2idle: Add AMD support to handle _DSM")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: x86: s2idle: Post-increment variables when getting constraints

[ Upstream commit 3c6b1212d20bbbffcad5709ab0f2d5ed9b5859a8 ]

When code uses a pre-increment it makes the reader question "why".
In the constraint fetching code there is no reason for the variables
to be pre-incremented so adjust to post-increment.
No intended functional changes.

Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 9cc8cd086f05 ("ACPI: x86: s2idle: Fix a logic error parsing AMD constraints table")
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/loongson-eiointc: Fix return value checking of eiointc_index

[ Upstream commit 2e99b73afde18853754c5fae8e8d1a66fe5e3f64 ]

Return value of function eiointc_index is int, however it is converted
into uint32_t and then compared smaller than zero, this will cause logic
problem.

Fixes: dd281e1a1a93 ("irqchip: Add Loongson Extended I/O interrupt controller support")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230811095805.2974722-2-maobibo@loongson.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>