Mauro Carvalho Chehab [Tue, 5 Apr 2011 17:59:17 +0000 (14:59 -0300)]
rc_keymaps: Sync with 2.6.39-rc1 + media patches
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 30 Mar 2011 15:06:27 +0000 (17:06 +0200)]
v4l2-compliance: fix modulator frequency test.
The modulator frequency test had the same bug as the tuner frequency
test had. Fix it for the modulator as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Hans Verkuil [Tue, 29 Mar 2011 19:39:33 +0000 (21:39 +0200)]
v4l2-ctl: streamon/streamoff expect proper stream type.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Hans Verkuil [Tue, 29 Mar 2011 19:35:59 +0000 (21:35 +0200)]
v4l2-compliance: fix bug in testTunerFreq.
'if (ret)' should have been 'if (ret != -EINVAL)'.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Ondrej Zary <linux@rainbow-software.org>
Mauro Carvalho Chehab [Wed, 16 Mar 2011 18:14:18 +0000 (15:14 -0300)]
parse_tcpdump_log.pl: Don't need to use unpack for string
This is a minor cleanup, removing the usage of unpack. There's
not much gain using it there, and, after the changes, code
is cleaner.
Also, adds the "more" fields into the parsed data.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 16 Mar 2011 18:03:08 +0000 (15:03 -0300)]
parse_tcpdump_log.pl: Fix most warnings and cleanup the code
There were several warnings happening with "use warnings".
Fix most of them. Also, use unpack to retrieve data from
the captured info, and remove some code redundancy.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 16 Mar 2011 16:01:44 +0000 (13:01 -0300)]
parse_tcpdump_log.pl: Improve documentation
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 15 Mar 2011 18:08:41 +0000 (15:08 -0300)]
parse_tcpdump_log.pl: add support for collecting data directly
Instead of needing to use tcpdump, just use Net:Pcap and retrieve the
data directly via libpcap. This allows real-time parsing of the logs,
and may be very useful while debugging certain drivers.
The usual way via tcpdump is not touched.
A patch is needed in order to optionally use Net::Pcap, as this is only
required on pcap mode.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 15 Mar 2011 13:59:46 +0000 (10:59 -0300)]
parse_tcpdump_log.pl: a few cleanups mostly at comments
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 15 Mar 2011 13:52:47 +0000 (10:52 -0300)]
parse_tcpdump_log.pl: Allow calling it via a pipe
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 15 Mar 2011 13:26:04 +0000 (10:26 -0300)]
parse_tcpdump_log.pl: Remove TcpDumpLog.pm dependency
TcpDumpLog.pm does a good job parsing tcpdump logs. However, it
works by reading everything into the memory, before allowing to
parse the data. This is not very good when dealing with very
long logs that could be produced by an USB 2.0 data stream device.
So, instead, let's copy the TcpDumpLog parser into the code, and
change it to work line by line. One additional advantage of using
such approach is that we could change the parser to also start
the usbmon monitoring, allowing to do a real time parsing.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Wed, 16 Mar 2011 13:53:35 +0000 (14:53 +0100)]
libv4l: update upside down device table
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Sun, 13 Mar 2011 11:35:34 +0000 (12:35 +0100)]
libv4l: update upside down device list
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Fri, 11 Mar 2011 18:48:18 +0000 (19:48 +0100)]
libv4l: update upside down device table
Mauro Carvalho Chehab [Wed, 9 Mar 2011 14:25:42 +0000 (11:25 -0300)]
parse_tcpdump_log.pl: Add missing Copyright/license
Forgot to specify the copyright/license at the file, and to update
parse-em28xx.pl license on the previous commit.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 9 Mar 2011 14:15:37 +0000 (11:15 -0300)]
parse_em28xx.pl: Parse also i2c device scans
While comparing the parsed messages between the saved register data
of em28xx and netmon parser, noticed that the scan messages were not
parsed. Also, it seems that the data from the driver is wrong, as it
is saying that some data were returned by the probed devices.
Comparing both logs is actually a very good test, as it shows that the
netfilter parser is working properly, as the only differences are on
the I2C scan messages.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 9 Mar 2011 04:54:07 +0000 (01:54 -0300)]
parse_tcpdump_log.pl: Add help and manual for the script
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 9 Mar 2011 04:28:45 +0000 (01:28 -0300)]
parse_tcpdump_log.pl: Improve debug logs
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 9 Mar 2011 03:53:09 +0000 (00:53 -0300)]
parse_tcpdump_log.pl: Prints error, if response returns error code
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 9 Mar 2011 03:52:37 +0000 (00:52 -0300)]
parse_tcpdump_log.pl: Add an option to enable debug
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 9 Mar 2011 01:47:38 +0000 (22:47 -0300)]
parse_tcpdump_log.pl: Use relative timestamps
Instead of use absolute timestamps, use timestamps relative to the
first package.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 9 Mar 2011 01:43:42 +0000 (22:43 -0300)]
parse_tcpdump_log.pl: Round timestamp calculus up
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 9 Mar 2011 01:38:29 +0000 (22:38 -0300)]
parse_tcpdump_log.pl: Fix parsed output value
%02x were producing wrong values. Use %s instead.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 8 Mar 2011 15:59:53 +0000 (12:59 -0300)]
Parse usbmon tcpdump logs directly
Instead of relying on wireshark parser, just read the tcpdump
logs directly, and use it to produce a parseable output.
I started to use my Beagleboard as an USB sniffer using the
code at:
http://beagleboard-usbsniffer.blogspot.com/
However, as I want to use the parser scripts for USB that I wrote,
I decided to write a parser that outputs data on a similar format.
On a first trial, I tried to parse the wireshark dump, but this
didn't work fine. So, I rewrote my parser to get the tcpdump
directly, using the cpan Net::TcpDumpLog.
There are some adjustments probably needed, but this version
already produces something usefull.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 8 Mar 2011 13:08:31 +0000 (10:08 -0300)]
Print output on a compact format, close to the one used by the parsing tools
Yet, parsing from wireshark parser seems to be broken, as long outputs
would be shown as:
000093248 ms 000000 ms (000304 us EP=0x00) 40 >>> 03 00 00 A0 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .. .
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 7 Mar 2011 14:58:14 +0000 (11:58 -0300)]
Add an initial parser for usbmon captured via wireshark
Usbmon allows capturing usb driver with tcpdump or wireshark.
However, data may need to be parsed, in order to process them
by some script.
The easiest way to parse is to use wireshark, exporting the output
dump with packet details, all expanded, and use a parser to convert
it into an easier format.
This parser is able to decode wireshark parsed files. For now,
it will only print the parsed data.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Tue, 8 Mar 2011 08:20:06 +0000 (09:20 +0100)]
libv4l: update upside down device list
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Bastien Nocera [Thu, 3 Mar 2011 15:36:44 +0000 (15:36 +0000)]
libv4l: Add WeTab to upside camera list
Signed-Off-By: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Fri, 4 Mar 2011 20:57:20 +0000 (21:57 +0100)]
libv4l: update upside down device table
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Fri, 4 Mar 2011 20:11:10 +0000 (21:11 +0100)]
libv4l: Add vicam cameras to list of cameras need sw auto gain + whitebalance
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Fri, 4 Mar 2011 20:09:46 +0000 (21:09 +0100)]
libv4l: take exposure minimum into account when calculating exposure low
Take the exposure minimum val into account when calculating the exposure low
threshold for sw autogain.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Mauro Carvalho Chehab [Sat, 26 Feb 2011 12:27:51 +0000 (09:27 -0300)]
qv4l2.svg: Updated to the version used to generate the bitmaps
The basic draw is the same, but this version uses a template on
inkscape for icons generation, and have the real scales used to
generate the bitmaps.
Also, corrected the svg meta-data to properly point to an open
license for the drawing.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 26 Feb 2011 12:20:22 +0000 (09:20 -0300)]
qv4l2: Add a desktop description for qv4l2 and new icons.
As we intend to have qv4l2 application installed on distros, we
need a .desktop description for it, plus icons of different sizes.
Created a svg icon close to the existing one, and added bitmaps
for it with different resolutions typically found on modern X
menus (16x16, 24x24, 32x32 and 64x64 resolutions). All of them
derivated from the svg file, and generated using inkscape.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Thu, 17 Feb 2011 09:22:17 +0000 (10:22 +0100)]
libv4l: update upside down device list
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Jean-François Moine [Tue, 15 Feb 2011 15:47:41 +0000 (16:47 +0100)]
v4l-utils: Add the JPEG Lite decoding function
JPEG Lite images are created by the DivIO nw80x chips.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Fri, 11 Feb 2011 12:27:57 +0000 (13:27 +0100)]
libv4l: update upside-down device table
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Fri, 11 Feb 2011 12:29:04 +0000 (13:29 +0100)]
Mark as version 0.8.4-test
Hans de Goede [Wed, 9 Feb 2011 21:38:06 +0000 (22:38 +0100)]
Release 0.8.3
Hans de Goede [Wed, 9 Feb 2011 22:02:55 +0000 (23:02 +0100)]
libv4l1: Handle devices with overlay capability too
This may need more testing, but with the kernel compatibility gone,
libv4l1 now *must* handle these devices too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Wed, 9 Feb 2011 21:34:11 +0000 (22:34 +0100)]
libv4l: update upside down device table
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Wed, 9 Feb 2011 21:28:57 +0000 (22:28 +0100)]
libv4l: Make check for IDEALMAX/PEGA PC H34 upside down camera less strict
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Wed, 9 Feb 2011 21:10:13 +0000 (22:10 +0100)]
libv4l: Make check for ThinkPad X201 upside down camera less strict
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Wed, 9 Feb 2011 21:02:35 +0000 (22:02 +0100)]
Fix new compiler warnings thrown by gcc-4.6
And fix 2 real bugs pointed out by these warnings!
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Wed, 9 Feb 2011 19:07:30 +0000 (20:07 +0100)]
libv4l1: Add linux/videodev.h replacement file
Add linux/videodev.h replacement file, since that has (finally) been removed
from the kernel.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Mauro Carvalho Chehab [Mon, 31 Jan 2011 19:14:35 +0000 (17:14 -0200)]
parse_cx231xx.pl: Fix write_ctrl msg
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 31 Jan 2011 19:10:42 +0000 (17:10 -0200)]
parse_cx231xx.pl: Remove some spurious messages
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 31 Jan 2011 18:21:12 +0000 (16:21 -0200)]
parse_cx231xx.pl: Fix the parser for messages that we don't translate yet
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 31 Jan 2011 18:11:48 +0000 (16:11 -0200)]
parse_cx231xx.pl: add config registers to the parser
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 26 Jan 2011 19:01:00 +0000 (17:01 -0200)]
ir-keytable: Show device repeat rate without any arguments
If it has read permission for /dev/input/event?, it will display
extra capabilities. In general, this requires root access.
Otherwise, it will print a warning message saying that the access
were denied.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 26 Jan 2011 18:49:45 +0000 (16:49 -0200)]
ir-keytables: Move show logic to a separate function
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 26 Jan 2011 18:40:15 +0000 (16:40 -0200)]
ir-keytable: Add support to adjust repeat period/delay
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Tue, 25 Jan 2011 15:17:51 +0000 (16:17 +0100)]
Release 0.8.2
Hans de Goede [Tue, 25 Jan 2011 11:40:19 +0000 (12:40 +0100)]
Fix ir-keytable manpage installation
Install under $(PREFIX)/share/man/man1 rather then /man/man1, and
install the manpage not the binary :)
Signed-off-By: Hans de Goede <hdegoede@redhat.com>
Mauro Carvalho Chehab [Tue, 25 Jan 2011 14:07:53 +0000 (12:07 -0200)]
ir-keytable: Be a little more pedantic with EVIOGKEYCODE
V1 always use u_int32_t. V2 can use different lengths, but,
currently, the tool is not ready for bigger code sizes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 25 Jan 2011 14:03:09 +0000 (12:03 -0200)]
ir-keytable: Fix the read logic, when protocol is V1
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 25 Jan 2011 13:56:18 +0000 (11:56 -0200)]
Initialize protocol version
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 25 Jan 2011 12:37:45 +0000 (10:37 -0200)]
Improve keycode reading by using V2 of the input protocol
Instead of seeking for keys into the entire keycode space, use
V2. This allow to read just the codes that are inside the table.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 25 Jan 2011 12:25:01 +0000 (10:25 -0200)]
ir-keytable: Improve cleans by using EVIOSKEYCODE_V2
The new input protocol version found on kernels 2.6.37+ provide a
better way to cleanup the table codes. Instead of having to do a
big for to cleanup the entire scancode space, it just deletes the
already existing keycodes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Tue, 25 Jan 2011 11:37:05 +0000 (12:37 +0100)]
ir-keytable.1 Add standard manpage markup codes
Add standard manpage markup codes to bold the command name and arguments,
italic the argument options, etc.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Mon, 24 Jan 2011 18:49:46 +0000 (19:49 +0100)]
libv4l update upside down device list
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Mauro Carvalho Chehab [Mon, 24 Jan 2011 15:46:03 +0000 (13:46 -0200)]
Sync keytables with the latest patches for IR
Those changes fix several issues found when double checking
several keytables.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 24 Jan 2011 13:05:25 +0000 (11:05 -0200)]
Fix the tag for manpages sections
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 24 Jan 2011 12:37:02 +0000 (10:37 -0200)]
Add a man page for ir-keytable
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 24 Jan 2011 12:17:26 +0000 (10:17 -0200)]
Add a template for ir-keytable man page
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Mon, 24 Jan 2011 10:50:44 +0000 (11:50 +0100)]
Makefiles: preserve timestamps when installing keympa files
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Mauro Carvalho Chehab [Mon, 24 Jan 2011 06:05:46 +0000 (04:05 -0200)]
gen_keytables.pl: Fix a parsing bug that were generating wrong entries
There's a parsing bug that were generating wrong entries, in
cases where there were some commented possible values for KEY_
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 23 Jan 2011 17:01:48 +0000 (15:01 -0200)]
Be sure that udev directory exists
This is needed when DISTDIR is used
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 23 Jan 2011 16:51:15 +0000 (14:51 -0200)]
Fix it to install udev rules at $DESTDIR
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 23 Jan 2011 15:16:16 +0000 (13:16 -0200)]
Installs an udev rule for loading the IR keymaps
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 23 Jan 2011 15:13:39 +0000 (13:13 -0200)]
rc_keymaps: Sync with kernel 2.6.38-rc2 + linux-next changes for drivers/media
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 23 Jan 2011 15:12:55 +0000 (13:12 -0200)]
ir-keytable: Prints error if get key fails
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Sun, 23 Jan 2011 11:43:25 +0000 (12:43 +0100)]
Fix building when CFLAGS are overridden from the make cmdline
Signed-off-By: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Sun, 23 Jan 2011 11:38:21 +0000 (12:38 +0100)]
Fix Makefile error propagation
We were handling the subdirs in utils/Makefile in such a way that make failing
in one of the subdirs would not abort the build.
Signed-off-By: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Sun, 23 Jan 2011 11:16:54 +0000 (12:16 +0100)]
Use $(MAKE) rather then make in Makefiles calling others
This fixes the:
"jobserver unavailable: using -j1. Add `+' to parent make rule"
messages seen when doing a parallel build.
Hans Verkuil [Sat, 22 Jan 2011 21:36:59 +0000 (22:36 +0100)]
v4l2-compliance: improve input/output tests.
Radio devices should not have inputs and outputs at all. Check this.
Also improve audioset checking and various fixes.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Sat, 22 Jan 2011 09:04:00 +0000 (10:04 +0100)]
v4l2-compliance: add fixme.txt keeping track of API problems.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Fri, 21 Jan 2011 22:38:31 +0000 (23:38 +0100)]
v4l2-compliance: implement verbosity level, improve warnings.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Fri, 21 Jan 2011 21:52:34 +0000 (22:52 +0100)]
v4l2-compliance: add VIDIOC_G/S/TRY_EXT_CTRLS tests
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Fri, 21 Jan 2011 20:45:33 +0000 (21:45 +0100)]
v4l2-compliance: add VIDIOC_G/S_FREQUENCY tests.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Fri, 21 Jan 2011 17:42:07 +0000 (18:42 +0100)]
v4l2-compliance: improve consistency of messages, require prio support
The priority calls must be supported to pass this test suite.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans de Goede [Fri, 21 Jan 2011 20:29:24 +0000 (21:29 +0100)]
Update ChangeLog for changes since 0.8.1
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Fri, 21 Jan 2011 20:17:09 +0000 (21:17 +0100)]
libv4l: update upside down device table
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans Verkuil [Fri, 21 Jan 2011 17:16:23 +0000 (18:16 +0100)]
v4l2-compliance: add TODO list of still-to-be-tested ioctls.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Fri, 21 Jan 2011 17:08:56 +0000 (18:08 +0100)]
v4l2-compliance: add tests for QUERYSTD and QUERY_DV_PRESET
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Fri, 21 Jan 2011 17:00:07 +0000 (18:00 +0100)]
v4l2-compliance: add DV_PRESET and DV_TIMINGS tests.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Fri, 21 Jan 2011 16:36:34 +0000 (17:36 +0100)]
v4l2-compliance: test ENUMSTD.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Fri, 21 Jan 2011 16:17:54 +0000 (17:17 +0100)]
v4l2-compliance: add G/S_STD tests
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Fri, 21 Jan 2011 16:17:00 +0000 (17:17 +0100)]
Merge branch 'master' of ssh://linuxtv.org/git/v4l-utils
Hans de Goede [Fri, 21 Jan 2011 14:43:17 +0000 (15:43 +0100)]
libv4l: update upside down devices table
Gregor Jasny [Fri, 21 Jan 2011 14:41:37 +0000 (15:41 +0100)]
Fix broken v4lutil Makefiles
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Gregor Jasny [Wed, 19 Jan 2011 14:34:17 +0000 (15:34 +0100)]
Fix broken v4lutil Makefiles
Signed-off-by: Gregor Jasny <gjasny@googlemail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Hans de Goede [Wed, 19 Jan 2011 09:17:53 +0000 (10:17 +0100)]
libv4l update upside down device table
Signed-off-by: Hans de Goede <hdegoede@redhat.com># Please enter the commit message for your changes. Lines starting
Hans Verkuil [Tue, 18 Jan 2011 10:06:54 +0000 (11:06 +0100)]
v4l2-ctl: set S_FREQUENCY type to RADIO for modulators.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Mon, 17 Jan 2011 19:40:13 +0000 (20:40 +0100)]
v4l2-ctl: fix --get-modulator output
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Mon, 17 Jan 2011 13:14:49 +0000 (14:14 +0100)]
Revert "v4l2-ctl/compliance: use local libv4l2 rather than the installed version."
This reverts commit
34b49ec47fc1e517485b221366a7d2a207306304.
Conflicts:
utils/v4l2-compliance/Makefile
This patch didn't work if you didn't have libv4l installed.
For now just revert this until we have a better solution.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Sun, 16 Jan 2011 17:52:07 +0000 (18:52 +0100)]
v4l2-compliance: add kernel version check to avoid kernel oops
Due to a bug in kernels <= 2.6.37 the kernel can crash if an attempt is made
to set a control of type CTRL_CLASS. Don't do this on such kernels.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Sun, 16 Jan 2011 17:21:37 +0000 (18:21 +0100)]
v4l2-compliance: add capability checks, start on STD testing
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Sun, 16 Jan 2011 16:05:18 +0000 (17:05 +0100)]
v4l2-compliance: add VIDIOC_G/S_CTRL tests
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Sun, 16 Jan 2011 11:20:26 +0000 (12:20 +0100)]
v4l2-ctl/compliance: use local libv4l2 rather than the installed version.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Hans Verkuil [Sun, 16 Jan 2011 10:55:00 +0000 (11:55 +0100)]
v4l2-compliance: if no device is specified, then use /dev/video0
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
projects / platform / upstream / v4l-utils.git / log