Bart Van Assche [Thu, 17 Aug 2017 20:12:45 +0000 (13:12 -0700)]
skd: Avoid that module unloading triggers a use-after-free
commit
7277cc67b3916eed47558c64f9c9c0de00a35cda upstream.
Since put_disk() triggers a disk_release() call and since that
last function calls blk_put_queue() if disk->queue != NULL, clear
the disk->queue pointer before calling put_disk(). This avoids
that unloading the skd kernel module triggers the following
use-after-free:
WARNING: CPU: 8 PID: 297 at lib/refcount.c:128 refcount_sub_and_test+0x70/0x80
refcount_t: underflow; use-after-free.
CPU: 8 PID: 297 Comm: kworker/8:1 Not tainted 4.11.10-300.fc26.x86_64 #1
Workqueue: events work_for_cpu_fn
Call Trace:
dump_stack+0x63/0x84
__warn+0xcb/0xf0
warn_slowpath_fmt+0x5a/0x80
refcount_sub_and_test+0x70/0x80
refcount_dec_and_test+0x11/0x20
kobject_put+0x1f/0x50
blk_put_queue+0x15/0x20
disk_release+0xae/0xf0
device_release+0x32/0x90
kobject_release+0x67/0x170
kobject_put+0x2b/0x50
put_disk+0x17/0x20
skd_destruct+0x5c/0x890 [skd]
skd_pci_probe+0x124d/0x13a0 [skd]
local_pci_probe+0x42/0xa0
work_for_cpu_fn+0x14/0x20
process_one_work+0x19e/0x470
worker_thread+0x1dc/0x4a0
kthread+0x125/0x140
ret_from_fork+0x25/0x30
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NeilBrown [Thu, 31 Aug 2017 00:23:25 +0000 (10:23 +1000)]
md/bitmap: disable bitmap_resize for file-backed bitmaps.
commit
e8a27f836f165c26f867ece7f31eb5c811692319 upstream.
bitmap_resize() does not work for file-backed bitmaps.
The buffer_heads are allocated and initialized when
the bitmap is read from the file, but resize doesn't
read from the file, it loads from the internal bitmap.
When it comes time to write the new bitmap, the bh is
non-existent and we crash.
The common case when growing an array involves making the array larger,
and that normally means making the bitmap larger. Doing
that inside the kernel is possible, but would need more code.
It is probably easier to require people who use file-backed
bitmaps to remove them and re-add after a reshape.
So this patch disables the resizing of arrays which have
file-backed bitmaps. This is better than crashing.
Reported-by: Zhilong Liu <zlliu@suse.com>
Fixes:
d60b479d177a ("md/bitmap: add bitmap_resize function to allow bitmap resizing.")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bart Van Assche [Thu, 17 Aug 2017 20:12:44 +0000 (13:12 -0700)]
block: Relax a check in blk_start_queue()
commit
4ddd56b003f251091a67c15ae3fe4a5c5c5e390a upstream.
Calling blk_start_queue() from interrupt context with the queue
lock held and without disabling IRQs, as the skd driver does, is
safe. This patch avoids that loading the skd driver triggers the
following warning:
WARNING: CPU: 11 PID: 1348 at block/blk-core.c:283 blk_start_queue+0x84/0xa0
RIP: 0010:blk_start_queue+0x84/0xa0
Call Trace:
skd_unquiesce_dev+0x12a/0x1d0 [skd]
skd_complete_internal+0x1e7/0x5a0 [skd]
skd_complete_other+0xc2/0xd0 [skd]
skd_isr_completion_posted.isra.30+0x2a5/0x470 [skd]
skd_isr+0x14f/0x180 [skd]
irq_forced_thread_fn+0x2a/0x70
irq_thread+0x144/0x1a0
kthread+0x125/0x140
ret_from_fork+0x2a/0x40
Fixes: commit
a038e2536472 ("[PATCH] blk_start_queue() must be called with irq disabled - add warning")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Ellerman [Thu, 24 Aug 2017 10:49:57 +0000 (20:49 +1000)]
powerpc: Fix DAR reporting when alignment handler faults
commit
f9effe925039cf54489b5c04e0d40073bb3a123d upstream.
Anton noticed that if we fault part way through emulating an unaligned
instruction, we don't update the DAR to reflect that.
The DAR value is eventually reported back to userspace as the address
in the SEGV signal, and if userspace is using that value to demand
fault then it can be confused by us not setting the value correctly.
This patch is ugly as hell, but is intended to be the minimal fix and
back ports easily.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zhangyi (F) [Thu, 24 Aug 2017 19:21:50 +0000 (15:21 -0400)]
ext4: fix quota inconsistency during orphan cleanup for read-only mounts
commit
95f1fda47c9d8738f858c3861add7bf0a36a7c0b upstream.
Quota does not get enabled for read-only mounts if filesystem
has quota feature, so that quotas cannot updated during orphan
cleanup, which will lead to quota inconsistency.
This patch turn on quotas during orphan cleanup for this case,
make sure quotas can be updated correctly.
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zhangyi (F) [Thu, 24 Aug 2017 19:19:39 +0000 (15:19 -0400)]
ext4: fix incorrect quotaoff if the quota feature is enabled
commit
b0a5a9589decd07db755d6a8d9c0910d96ff7992 upstream.
Current ext4 quota should always "usage enabled" if the
quota feautre is enabled. But in ext4_orphan_cleanup(), it
turn quotas off directly (used for the older journaled
quota), so we cannot turn it on again via "quotaon" unless
umount and remount ext4.
Simple reproduce:
mkfs.ext4 -O project,quota /dev/vdb1
mount -o prjquota /dev/vdb1 /mnt
chattr -p 123 /mnt
chattr +P /mnt
touch /mnt/aa /mnt/bb
exec 100<>/mnt/aa
rm -f /mnt/aa
sync
echo c > /proc/sysrq-trigger
#reboot and mount
mount -o prjquota /dev/vdb1 /mnt
#query status
quotaon -Ppv /dev/vdb1
#output
quotaon: Cannot find mountpoint for device /dev/vdb1
quotaon: No correct mountpoint specified.
This patch add check for journaled quotas to avoid incorrect
quotaoff when ext4 has quota feautre.
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephan Mueller [Thu, 21 Sep 2017 08:16:53 +0000 (10:16 +0200)]
crypto: AF_ALG - remove SGL terminator indicator when chaining
Fixed differently upstream as commit
2d97591ef43d ("crypto: af_alg - consolidation of duplicate code")
The SGL is MAX_SGL_ENTS + 1 in size. The last SG entry is used for the
chaining and is properly updated with the sg_chain invocation. During
the filling-in of the initial SG entries, sg_mark_end is called for each
SG entry. This is appropriate as long as no additional SGL is chained
with the current SGL. However, when a new SGL is chained and the last
SG entry is updated with sg_chain, the last but one entry still contains
the end marker from the sg_mark_end. This end marker must be removed as
otherwise a walk of the chained SGLs will cause a NULL pointer
dereference at the last but one SG entry, because sg_next will return
NULL.
The patch only applies to all kernels up to and including 4.13. The
patch
2d97591ef43d0587be22ad1b0d758d6df4999a0b added to 4.14-rc1
introduced a complete new code base which addresses this bug in
a different way. Yet, that patch is too invasive for stable kernels
and was therefore not marked for stable.
Fixes:
8ff590903d5fc ("crypto: algif_skcipher - User-space interface for skcipher operations")
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aleksandar Markovic [Thu, 27 Jul 2017 16:08:53 +0000 (18:08 +0200)]
MIPS: math-emu: MINA.<D|S>: Fix some cases of infinity and zero inputs
commit
304bfe473e70523e591fb1c9223289d355e0bdcb upstream.
Fix following special cases for MINA>.<D|S>:
- if one of the inputs is zero, and the other is subnormal, normal,
or infinity, the value of the former should be returned (that is,
a zero).
- if one of the inputs is infinity, and the other input is normal,
or subnormal, the value of the latter should be returned.
The previous implementation's logic for such cases was incorrect - it
appears as if it implements MAXA, and not MINA instruction.
A relevant example:
MINA.S fd,fs,ft:
If fs contains 100.0, and ft contains 0.0, fd is going to contain
0.0 (without this patch, it used to contain 100.0).
Fixes:
a79f5f9ba508 ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes:
4e9561b20e2f ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16885/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aleksandar Markovic [Thu, 27 Jul 2017 16:08:52 +0000 (18:08 +0200)]
MIPS: math-emu: <MAXA|MINA>.<D|S>: Fix cases of both infinite inputs
commit
3444c4eb534c20e44f0d6670b34263efaf8b531f upstream.
Fix the value returned by <MAXA|MINA>.<D|S> fd,fs,ft, if both inputs
are infinite. The previous implementation returned always the value
contained in ft in such cases. The correct behavior is specified
in Mips instruction set manual and is as follows:
fs ft MAXA MINA
---------------------------------
inf inf inf inf
inf -inf inf -inf
-inf inf inf -inf
-inf -inf -inf -inf
A relevant example:
MAXA.S fd,fs,ft:
If fs contains +inf, and ft contains -inf, fd is going to contain
+inf (without this patch, it used to contain -inf).
Fixes:
a79f5f9ba508 ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes:
4e9561b20e2f ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16884/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aleksandar Markovic [Thu, 27 Jul 2017 16:08:51 +0000 (18:08 +0200)]
MIPS: math-emu: <MAXA|MINA>.<D|S>: Fix cases of input values with opposite signs
commit
1a41b3b441508ae63b1a9ec699ec94065739eb60 upstream.
Fix the value returned by <MAXA|MINA>.<D|S>, if the inputs are normal
fp numbers of the same absolute value, but opposite signs.
A relevant example:
MAXA.S fd,fs,ft:
If fs contains -3.0, and ft contains +3.0, fd is going to contain
+3.0 (without this patch, it used to contain -3.0).
Fixes:
a79f5f9ba508 ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes:
4e9561b20e2f ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16883/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aleksandar Markovic [Thu, 27 Jul 2017 16:08:50 +0000 (18:08 +0200)]
MIPS: math-emu: <MAX|MIN>.<D|S>: Fix cases of both inputs negative
commit
aabf5cf02e22ebc4e541adf835910f388b6c3e65 upstream.
Fix the value returned by <MAX|MIN>.<D|S>, if both inputs are negative
normal fp numbers. The previous logic did not take into account that
if both inputs have the same sign, there should be separate treatment
of the cases when both inputs are negative and when both inputs are
positive.
A relevant example:
MAX.S fd,fs,ft:
If fs contains -5.0, and ft contains -7.0, fd is going to contain
-5.0 (without this patch, it used to contain -7.0).
Fixes:
a79f5f9ba508 ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes:
4e9561b20e2f ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16882/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aleksandar Markovic [Thu, 27 Jul 2017 16:08:49 +0000 (18:08 +0200)]
MIPS: math-emu: <MAX|MAXA|MIN|MINA>.<D|S>: Fix cases of both inputs zero
commit
15560a58bfd4ff82cdd16b2270d4ef9b06d2cc4d upstream.
Fix the value returned by <MAX|MAXA|MIN|MINA>.<D|S>, if both inputs
are zeros. The right behavior in such cases is stated in instruction
reference manual and is as follows:
fs ft MAX MIN MAXA MINA
---------------------------------------------
0 0 0 0 0 0
0 -0 0 -0 0 -0
-0 0 0 -0 0 -0
-0 -0 -0 -0 -0 -0
Prior to this patch, some of the above cases were yielding correct
results. However, for the sake of code consistency, all such cases
are rewritten in this patch.
A relevant example:
MAX.S fd,fs,ft:
If fs contains +0.0, and ft contains -0.0, fd is going to contain
+0.0 (without this patch, it used to contain -0.0).
Fixes:
a79f5f9ba508 ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes:
4e9561b20e2f ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16881/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aleksandar Markovic [Thu, 27 Jul 2017 16:08:48 +0000 (18:08 +0200)]
MIPS: math-emu: <MAX|MAXA|MIN|MINA>.<D|S>: Fix quiet NaN propagation
commit
e78bf0dc4789bdea1453595ae89e8db65918e22e upstream.
Fix the value returned by <MAX|MAXA|MIN|MINA>.<D|S> fd,fs,ft, if both
inputs are quiet NaNs. The <MAX|MAXA|MIN|MINA>.<D|S> specifications
state that the returned value in such cases should be the quiet NaN
contained in register fs.
A relevant example:
MAX.S fd,fs,ft:
If fs contains qNaN1, and ft contains qNaN2, fd is going to contain
qNaN1 (without this patch, it used to contain qNaN2).
Fixes:
a79f5f9ba508 ("MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction")
Fixes:
4e9561b20e2f ("MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction")
Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Bo Hu <bohu@google.com>
Cc: Douglas Leung <douglas.leung@imgtec.com>
Cc: Jin Qian <jinqian@google.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Cc: Raghu Gandham <raghu.gandham@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/16880/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kai-Heng Feng [Fri, 15 Sep 2017 16:36:16 +0000 (09:36 -0700)]
Input: i8042 - add Gigabyte P57 to the keyboard reset table
commit
697c5d8a36768b36729533fb44622b35d56d6ad0 upstream.
Similar to other Gigabyte laptops, the touchpad on P57 requires a
keyboard reset to detect Elantech touchpad correctly.
BugLink: https://bugs.launchpad.net/bugs/1594214
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 2 Aug 2017 11:11:39 +0000 (13:11 +0200)]
tty: fix __tty_insert_flip_char regression
commit
8a5a90a2a477b86a3dc2eaa5a706db9bfdd647ca upstream.
Sergey noticed a small but fatal mistake in __tty_insert_flip_char,
leading to an oops in an interrupt handler when using any serial
port.
The problem is that I accidentally took the tty_buffer pointer
before calling __tty_buffer_request_room(), which replaces the
buffer. This moves the pointer lookup to the right place after
allocating the new buffer space.
Fixes:
979990c62848 ("tty: improve tty_insert_flip_char() fast path")
Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Tue, 20 Jun 2017 21:10:42 +0000 (23:10 +0200)]
tty: improve tty_insert_flip_char() slow path
commit
065ea0a7afd64d6cf3464bdd1d8cd227527e2045 upstream.
While working on improving the fast path of tty_insert_flip_char(),
I noticed that by calling tty_buffer_request_room(), we needlessly
move to the separate flag buffer mode for the tty, even when all
characters use TTY_NORMAL as the flag.
This changes the code to call __tty_buffer_request_room() with the
correct flag, which will then allocate a regular buffer when it rounds
out of space but no special flags have been used. I'm guessing that
this is the behavior that Peter Hurley intended when he introduced
the compacted flip buffers.
Fixes:
acc0f67f307f ("tty: Halve flip buffer GFP_ATOMIC memory consumption")
Cc: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Tue, 20 Jun 2017 21:10:41 +0000 (23:10 +0200)]
tty: improve tty_insert_flip_char() fast path
commit
979990c6284814617d8f2179d197f72ff62b5d85 upstream.
kernelci.org reports a crazy stack usage for the VT code when CONFIG_KASAN
is enabled:
drivers/tty/vt/keyboard.c: In function 'kbd_keycode':
drivers/tty/vt/keyboard.c:1452:1: error: the frame size of 2240 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
The problem is that tty_insert_flip_char() gets inlined many times into
kbd_keycode(), and also into other functions, and each copy requires 128
bytes for stack redzone to check for a possible out-of-bounds access on
the 'ch' and 'flags' arguments that are passed into
tty_insert_flip_string_flags as a variable-length string.
This introduces a new __tty_insert_flip_char() function for the slow
path, which receives the two arguments by value. This completely avoids
the problem and the stack usage goes back down to around 100 bytes.
Without KASAN, this is also slightly better, as we don't have to
spill the arguments to the stack but can simply pass 'ch' and 'flag'
in registers, saving a few bytes in .text for each call site.
This should be backported to linux-4.0 or later, which first introduced
the stack sanitizer in the kernel.
Fixes:
c420f167db8c ("kasan: enable stack instrumentation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Minchan Kim [Tue, 13 Dec 2016 00:42:08 +0000 (16:42 -0800)]
mm: prevent double decrease of nr_reserved_highatomic
commit
4855e4a7f29d6d10b0b9c84e189c770c9a94e91e upstream.
There is race between page freeing and unreserved highatomic.
CPU 0 CPU 1
free_hot_cold_page
mt = get_pfnblock_migratetype
set_pcppage_migratetype(page, mt)
unreserve_highatomic_pageblock
spin_lock_irqsave(&zone->lock)
move_freepages_block
set_pageblock_migratetype(page)
spin_unlock_irqrestore(&zone->lock)
free_pcppages_bulk
__free_one_page(mt) <- mt is stale
By above race, a page on CPU 0 could go non-highorderatomic free list
since the pageblock's type is changed. By that, unreserve logic of
highorderatomic can decrease reserved count on a same pageblock severak
times and then it will make mismatch between nr_reserved_highatomic and
the number of reserved pageblock.
So, this patch verifies whether the pageblock is highatomic or not and
decrease the count only if the pageblock is highatomic.
Link: http://lkml.kernel.org/r/1476259429-18279-3-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Sangseok Lee <sangseok.lee@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chuck Lever [Sat, 29 Oct 2016 22:19:03 +0000 (18:19 -0400)]
nfsd: Fix general protection fault in release_lock_stateid()
commit
f46c445b79906a9da55c13e0a6f6b6a006b892fe upstream.
When I push NFSv4.1 / RDMA hard, (xfstests generic/089, for example),
I get this crash on the server:
Oct 28 22:04:30 klimt kernel: general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
Oct 28 22:04:30 klimt kernel: Modules linked in: cts rpcsec_gss_krb5 iTCO_wdt iTCO_vendor_support sb_edac edac_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm btrfs irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd xor pcspkr raid6_pq i2c_i801 i2c_smbus lpc_ich mfd_core sg mei_me mei ioatdma shpchp wmi ipmi_si ipmi_msghandler rpcrdma ib_ipoib rdma_ucm acpi_power_meter acpi_pad ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c mlx4_ib mlx4_en ib_core sr_mod cdrom sd_mod ast drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel igb ahci libahci ptp mlx4_core pps_core dca libata i2c_algo_bit i2c_core dm_mirror dm_region_hash dm_log dm_mod
Oct 28 22:04:30 klimt kernel: CPU: 7 PID: 1558 Comm: nfsd Not tainted 4.9.0-rc2-00005-g82cd754 #8
Oct 28 22:04:30 klimt kernel: Hardware name: Supermicro Super Server/X10SRL-F, BIOS 1.0c 09/09/2015
Oct 28 22:04:30 klimt kernel: task:
ffff880835c3a100 task.stack:
ffff8808420d8000
Oct 28 22:04:30 klimt kernel: RIP: 0010:[<
ffffffffa05a759f>] [<
ffffffffa05a759f>] release_lock_stateid+0x1f/0x60 [nfsd]
Oct 28 22:04:30 klimt kernel: RSP: 0018:
ffff8808420dbce0 EFLAGS:
00010246
Oct 28 22:04:30 klimt kernel: RAX:
ffff88084e6660f0 RBX:
ffff88084e667020 RCX:
0000000000000000
Oct 28 22:04:30 klimt kernel: RDX:
0000000000000007 RSI:
0000000000000000 RDI:
ffff88084e667020
Oct 28 22:04:30 klimt kernel: RBP:
ffff8808420dbcf8 R08:
0000000000000001 R09:
0000000000000000
Oct 28 22:04:30 klimt kernel: R10:
ffff880835c3a100 R11:
ffff880835c3aca8 R12:
6b6b6b6b6b6b6b6b
Oct 28 22:04:30 klimt kernel: R13:
ffff88084e6670d8 R14:
ffff880835f546f0 R15:
ffff880835f1c548
Oct 28 22:04:30 klimt kernel: FS:
0000000000000000(0000) GS:
ffff88087bdc0000(0000) knlGS:
0000000000000000
Oct 28 22:04:30 klimt kernel: CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
Oct 28 22:04:30 klimt kernel: CR2:
00007ff020389000 CR3:
0000000001c06000 CR4:
00000000001406e0
Oct 28 22:04:30 klimt kernel: Stack:
Oct 28 22:04:30 klimt kernel:
ffff88084e667020 0000000000000000 ffff88084e6670d8 ffff8808420dbd20
Oct 28 22:04:30 klimt kernel:
ffffffffa05ac80d ffff880835f54548 ffff88084e640008 ffff880835f545b0
Oct 28 22:04:30 klimt kernel:
ffff8808420dbd70 ffffffffa059803d ffff880835f1c768 0000000000000870
Oct 28 22:04:30 klimt kernel: Call Trace:
Oct 28 22:04:30 klimt kernel: [<
ffffffffa05ac80d>] nfsd4_free_stateid+0xfd/0x1b0 [nfsd]
Oct 28 22:04:30 klimt kernel: [<
ffffffffa059803d>] nfsd4_proc_compound+0x40d/0x690 [nfsd]
Oct 28 22:04:30 klimt kernel: [<
ffffffffa0583114>] nfsd_dispatch+0xd4/0x1d0 [nfsd]
Oct 28 22:04:30 klimt kernel: [<
ffffffffa047bbf9>] svc_process_common+0x3d9/0x700 [sunrpc]
Oct 28 22:04:30 klimt kernel: [<
ffffffffa047ca64>] svc_process+0xf4/0x330 [sunrpc]
Oct 28 22:04:30 klimt kernel: [<
ffffffffa05827ca>] nfsd+0xfa/0x160 [nfsd]
Oct 28 22:04:30 klimt kernel: [<
ffffffffa05826d0>] ? nfsd_destroy+0x170/0x170 [nfsd]
Oct 28 22:04:30 klimt kernel: [<
ffffffff810b367b>] kthread+0x10b/0x120
Oct 28 22:04:30 klimt kernel: [<
ffffffff810b3570>] ? kthread_stop+0x280/0x280
Oct 28 22:04:30 klimt kernel: [<
ffffffff8174e8ba>] ret_from_fork+0x2a/0x40
Oct 28 22:04:30 klimt kernel: Code: c3 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 48 8b 87 b0 00 00 00 48 89 fb 4c 8b a0 98 00 00 00 <49> 8b 44 24 20 48 8d b8 80 03 00 00 e8 10 66 1a e1 48 89 df e8
Oct 28 22:04:30 klimt kernel: RIP [<
ffffffffa05a759f>] release_lock_stateid+0x1f/0x60 [nfsd]
Oct 28 22:04:30 klimt kernel: RSP <
ffff8808420dbce0>
Oct 28 22:04:30 klimt kernel: ---[ end trace
cf5d0b371973e167 ]---
Jeff Layton says:
> Hm...now that I look though, this is a little suspicious:
>
> struct nfs4_openowner *oo = openowner(stp->st_openstp->st_stateowner);
>
> I wonder if it's possible for the openstateid to have already been
> destroyed at this point.
>
> We might be better off doing something like this to get the client pointer:
>
> stp->st_stid.sc_client;
>
> ...which should be more direct and less dependent on other stateids
> staying valid.
With the suggested change, I am no longer able to reproduce the above oops.
v2: Fix unhash_lock_stateid() as well
Fix-suggested-by: Jeff Layton <jlayton@redhat.com>
Fixes:
42691398be08 ('nfsd: Fix race between FREE_STATEID and LOCK')
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Cc: Christian Theune <ct@flyingcircus.io>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Song Liu [Thu, 24 Aug 2017 16:53:59 +0000 (09:53 -0700)]
md/raid5: release/flush io in raid5_do_work()
commit
9c72a18e46ebe0f09484cce8ebf847abdab58498 upstream.
In raid5, there are scenarios where some ios are deferred to a later
time, and some IO need a flush to complete. To make sure we make
progress with these IOs, we need to call the following functions:
flush_deferred_bios(conf);
r5l_flush_stripe_to_raid(conf->log);
Both of these functions are called in raid5d(), but missing in
raid5_do_work(). As a result, these functions are not called
when multi-threading (group_thread_cnt > 0) is enabled. This patch
adds calls to these function to raid5_do_work().
Note for stable branches:
r5l_flush_stripe_to_raid(conf->log) is need for 4.4+
flush_deferred_bios(conf) is only needed for 4.11+
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andy Lutomirski [Tue, 1 Aug 2017 14:11:35 +0000 (07:11 -0700)]
x86/fsgsbase/64: Report FSBASE and GSBASE correctly in core dumps
commit
9584d98bed7a7a904d0702ad06bbcc94703cb5b4 upstream.
In ELF_COPY_CORE_REGS, we're copying from the current task, so
accessing thread.fsbase and thread.gsbase makes no sense. Just read
the values from the CPU registers.
In practice, the old code would have been correct most of the time
simply because thread.fsbase and thread.gsbase usually matched the
CPU registers.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang Seok <chang.seok.bae@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jaegeuk Kim [Sun, 13 Aug 2017 04:33:23 +0000 (21:33 -0700)]
f2fs: check hot_data for roll-forward recovery
commit
125c9fb1ccb53eb2ea9380df40f3c743f3fb2fed upstream.
We need to check HOT_DATA to truncate any previous data block when doing
roll-forward recovery.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Fri, 8 Sep 2017 22:48:47 +0000 (15:48 -0700)]
ipv6: fix typo in fib6_net_exit()
[ Upstream commit
32a805baf0fb70b6dbedefcd7249ac7f580f9e3b ]
IPv6 FIB should use FIB6_TABLE_HASHSZ, not FIB_TABLE_HASHSZ.
Fixes:
ba1cc08d9488 ("ipv6: fix memory leak with multiple tables during netns destruction")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sabrina Dubroca [Fri, 8 Sep 2017 08:26:19 +0000 (10:26 +0200)]
ipv6: fix memory leak with multiple tables during netns destruction
[ Upstream commit
ba1cc08d9488c94cb8d94f545305688b72a2a300 ]
fib6_net_exit only frees the main and local tables. If another table was
created with fib6_alloc_table, we leak it when the netns is destroyed.
Fix this in the same way ip_fib_net_exit cleans up tables, by walking
through the whole hashtable of fib6_table's. We can get rid of the
special cases for local and main, since they're also part of the
hashtable.
Reproducer:
ip netns add x
ip -net x -6 rule add from 6003:1::/64 table 100
ip netns del x
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes:
58f09b78b730 ("[NETNS][IPV6] ip6_fib - make it per network namespace")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Claudiu Manoil [Mon, 4 Sep 2017 07:45:28 +0000 (10:45 +0300)]
gianfar: Fix Tx flow control deactivation
[ Upstream commit
5d621672bc1a1e5090c1ac5432a18c79e0e13e03 ]
The wrong register is checked for the Tx flow control bit,
it should have been maccfg1 not maccfg2.
This went unnoticed for so long probably because the impact is
hardly visible, not to mention the tangled code from adjust_link().
First, link flow control (i.e. handling of Rx/Tx link level pause frames)
is disabled by default (needs to be enabled via 'ethtool -A').
Secondly, maccfg2 always returns 0 for tx_flow_oldval (except for a few
old boards), which results in Tx flow control remaining always on
once activated.
Fixes:
45b679c9a3ccd9e34f28e6ec677b812a860eb8eb ("gianfar: Implement PAUSE frame generation support")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jesper Dangaard Brouer [Fri, 1 Sep 2017 09:26:13 +0000 (11:26 +0200)]
Revert "net: fix percpu memory leaks"
[ Upstream commit
5a63643e583b6a9789d7a225ae076fb4e603991c ]
This reverts commit
1d6119baf0610f813eb9d9580eb4fd16de5b4ceb.
After reverting commit
6d7b857d541e ("net: use lib/percpu_counter API
for fragmentation mem accounting") then here is no need for this
fix-up patch. As percpu_counter is no longer used, it cannot
memory leak it any-longer.
Fixes:
6d7b857d541e ("net: use lib/percpu_counter API for fragmentation mem accounting")
Fixes:
1d6119baf061 ("net: fix percpu memory leaks")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jesper Dangaard Brouer [Fri, 1 Sep 2017 09:26:08 +0000 (11:26 +0200)]
Revert "net: use lib/percpu_counter API for fragmentation mem accounting"
[ Upstream commit
fb452a1aa3fd4034d7999e309c5466ff2d7005aa ]
This reverts commit
6d7b857d541ecd1d9bd997c97242d4ef94b19de2.
There is a bug in fragmentation codes use of the percpu_counter API,
that can cause issues on systems with many CPUs.
The frag_mem_limit() just reads the global counter (fbc->count),
without considering other CPUs can have upto batch size (130K) that
haven't been subtracted yet. Due to the 3MBytes lower thresh limit,
this become dangerous at >=24 CPUs (3*1024*1024/130000=24).
The correct API usage would be to use __percpu_counter_compare() which
does the right thing, and takes into account the number of (online)
CPUs and batch size, to account for this and call __percpu_counter_sum()
when needed.
We choose to revert the use of the lib/percpu_counter API for frag
memory accounting for several reasons:
1) On systems with CPUs > 24, the heavier fully locked
__percpu_counter_sum() is always invoked, which will be more
expensive than the atomic_t that is reverted to.
Given systems with more than 24 CPUs are becoming common this doesn't
seem like a good option. To mitigate this, the batch size could be
decreased and thresh be increased.
2) The add_frag_mem_limit+sub_frag_mem_limit pairs happen on the RX
CPU, before SKBs are pushed into sockets on remote CPUs. Given
NICs can only hash on L2 part of the IP-header, the NIC-RXq's will
likely be limited. Thus, a fair chance that atomic add+dec happen
on the same CPU.
Revert note that commit
1d6119baf061 ("net: fix percpu memory leaks")
removed init_frag_mem_limit() and instead use inet_frags_init_net().
After this revert, inet_frags_uninit_net() becomes empty.
Fixes:
6d7b857d541e ("net: use lib/percpu_counter API for fragmentation mem accounting")
Fixes:
1d6119baf061 ("net: fix percpu memory leaks")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Wang [Thu, 18 May 2017 18:22:33 +0000 (11:22 -0700)]
tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0
[ Upstream commit
499350a5a6e7512d9ed369ed63a4244b6536f4f8 ]
When tcp_disconnect() is called, inet_csk_delack_init() sets
icsk->icsk_ack.rcv_mss to 0.
This could potentially cause tcp_recvmsg() => tcp_cleanup_rbuf() =>
__tcp_select_window() call path to have division by 0 issue.
So this patch initializes rcv_mss to TCP_MIN_MSS instead of 0.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Thu, 31 Aug 2017 00:49:29 +0000 (17:49 -0700)]
Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()"
[ Upstream commit
ebc8254aeae34226d0bc8fda309fd9790d4dccfe ]
This reverts commit
7ad813f208533cebfcc32d3d7474dc1677d1b09a ("net: phy:
Correctly process PHY_HALTED in phy_stop_machine()") because it is
creating the possibility for a NULL pointer dereference.
David Daney provide the following call trace and diagram of events:
When ndo_stop() is called we call:
phy_disconnect()
+---> phy_stop_interrupts() implies: phydev->irq = PHY_POLL;
+---> phy_stop_machine()
| +---> phy_state_machine()
| +----> queue_delayed_work(): Work queued.
+--->phy_detach() implies: phydev->attached_dev = NULL;
Now at a later time the queued work does:
phy_state_machine()
+---->netif_carrier_off(phydev->attached_dev): Oh no! It is NULL:
CPU 12 Unable to handle kernel paging request at virtual address
0000000000000048, epc ==
ffffffff80de37ec, ra ==
ffffffff80c7c
Oops[#1]:
CPU: 12 PID: 1502 Comm: kworker/12:1 Not tainted 4.9.43-Cavium-Octeon+ #1
Workqueue: events_power_efficient phy_state_machine
task:
80000004021ed100 task.stack:
8000000409d70000
$ 0 :
0000000000000000 ffffffff84720060 0000000000000048 0000000000000004
$ 4 :
0000000000000000 0000000000000001 0000000000000004 0000000000000000
$ 8 :
0000000000000000 0000000000000000 00000000ffff98f3 0000000000000000
$12 :
8000000409d73fe0 0000000000009c00 ffffffff846547c8 000000000000af3b
$16 :
80000004096bab68 80000004096babd0 0000000000000000 80000004096ba800
$20 :
0000000000000000 0000000000000000 ffffffff81090000 0000000000000008
$24 :
0000000000000061 ffffffff808637b0
$28 :
8000000409d70000 8000000409d73cf0 80000000271bd300 ffffffff80c7804c
Hi :
000000000000002a
Lo :
000000000000003f
epc :
ffffffff80de37ec netif_carrier_off+0xc/0x58
ra :
ffffffff80c7804c phy_state_machine+0x48c/0x4f8
Status:
14009ce3 KX SX UX KERNEL EXL IE
Cause :
00800008 (ExcCode 02)
BadVA :
0000000000000048
PrId :
000d9501 (Cavium Octeon III)
Modules linked in:
Process kworker/12:1 (pid: 1502, threadinfo=
8000000409d70000,
task=
80000004021ed100, tls=
0000000000000000)
Stack :
8000000409a54000 80000004096bab68 80000000271bd300 80000000271c1e00
0000000000000000 ffffffff808a1708 8000000409a54000 80000000271bd300
80000000271bd320 8000000409a54030 ffffffff80ff0f00 0000000000000001
ffffffff81090000 ffffffff808a1ac0 8000000402182080 ffffffff84650000
8000000402182080 ffffffff84650000 ffffffff80ff0000 8000000409a54000
ffffffff808a1970 0000000000000000 80000004099e8000 8000000402099240
0000000000000000 ffffffff808a8598 0000000000000000 8000000408eeeb00
8000000409a54000 00000000810a1d00 0000000000000000 8000000409d73de8
8000000409d73de8 0000000000000088 000000000c009c00 8000000409d73e08
8000000409d73e08 8000000402182080 ffffffff808a84d0 8000000402182080
...
Call Trace:
[<
ffffffff80de37ec>] netif_carrier_off+0xc/0x58
[<
ffffffff80c7804c>] phy_state_machine+0x48c/0x4f8
[<
ffffffff808a1708>] process_one_work+0x158/0x368
[<
ffffffff808a1ac0>] worker_thread+0x150/0x4c0
[<
ffffffff808a8598>] kthread+0xc8/0xe0
[<
ffffffff808617f0>] ret_from_kernel_thread+0x14/0x1c
The original motivation for this change originated from Marc Gonzales
indicating that his network driver did not have its adjust_link callback
executing with phydev->link = 0 while he was expecting it.
PHYLIB has never made any such guarantees ever because phy_stop() merely just
tells the workqueue to move into PHY_HALTED state which will happen
asynchronously.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reported-by: David Daney <ddaney.cavm@gmail.com>
Fixes:
7ad813f20853 ("net: phy: Correctly process PHY_HALTED in phy_stop_machine()")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 23 Aug 2017 13:59:49 +0000 (15:59 +0200)]
qlge: avoid memcpy buffer overflow
[ Upstream commit
e58f95831e7468d25eb6e41f234842ecfe6f014f ]
gcc-8.0.0 (snapshot) points out that we copy a variable-length string
into a fixed length field using memcpy() with the destination length,
and that ends up copying whatever follows the string:
inlined from 'ql_core_dump' at drivers/net/ethernet/qlogic/qlge/qlge_dbg.c:1106:2:
drivers/net/ethernet/qlogic/qlge/qlge_dbg.c:708:2: error: 'memcpy' reading 15 bytes from a region of size 14 [-Werror=stringop-overflow=]
memcpy(seg_hdr->description, desc, (sizeof(seg_hdr->description)) - 1);
Changing it to use strncpy() will instead zero-pad the destination,
which seems to be the right thing to do here.
The bug is probably harmless, but it seems like a good idea to address
it in stable kernels as well, if only for the purpose of building with
gcc-8 without warnings.
Fixes:
a61f80261306 ("qlge: Add ethtool register dump function.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Wang [Fri, 25 Aug 2017 22:03:10 +0000 (15:03 -0700)]
ipv6: fix sparse warning on rt6i_node
[ Upstream commit
4e587ea71bf924f7dac621f1351653bd41e446cb ]
Commit
c5cff8561d2d adds rcu grace period before freeing fib6_node. This
generates a new sparse warning on rt->rt6i_node related code:
net/ipv6/route.c:1394:30: error: incompatible types in comparison
expression (different address spaces)
./include/net/ip6_fib.h:187:14: error: incompatible types in comparison
expression (different address spaces)
This commit adds "__rcu" tag for rt6i_node and makes sure corresponding
rcu API is used for it.
After this fix, sparse no longer generates the above warning.
Fixes:
c5cff8561d2d ("ipv6: add rcu grace period before freeing fib6_node")
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Wang [Mon, 21 Aug 2017 16:47:10 +0000 (09:47 -0700)]
ipv6: add rcu grace period before freeing fib6_node
[ Upstream commit
c5cff8561d2d0006e972bd114afd51f082fee77c ]
We currently keep rt->rt6i_node pointing to the fib6_node for the route.
And some functions make use of this pointer to dereference the fib6_node
from rt structure, e.g. rt6_check(). However, as there is neither
refcount nor rcu taken when dereferencing rt->rt6i_node, it could
potentially cause crashes as rt->rt6i_node could be set to NULL by other
CPUs when doing a route deletion.
This patch introduces an rcu grace period before freeing fib6_node and
makes sure the functions that dereference it takes rcu_read_lock().
Note: there is no "Fixes" tag because this bug was there in a very
early stage.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefano Brivio [Fri, 18 Aug 2017 12:40:53 +0000 (14:40 +0200)]
ipv6: accept 64k - 1 packet length in ip6_find_1stfragopt()
[ Upstream commit
3de33e1ba0506723ab25734e098cf280ecc34756 ]
A packet length of exactly IPV6_MAXPLEN is allowed, we should
refuse parsing options only if the size is 64KiB or more.
While at it, remove one extra variable and one assignment which
were also introduced by the commit that introduced the size
check. Checking the sum 'offset + len' and only later adding
'len' to 'offset' doesn't provide any advantage over directly
summing to 'offset' and checking it.
Fixes:
6399f1fae4ec ("ipv6: avoid overflow of offset in ip6_find_1stfragopt")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 13 Sep 2017 21:10:05 +0000 (14:10 -0700)]
Linux 4.4.88
Richard Wareing [Tue, 12 Sep 2017 23:09:35 +0000 (09:09 +1000)]
xfs: XFS_IS_REALTIME_INODE() should be false if no rt device present
commit
b31ff3cdf540110da4572e3e29bd172087af65cc upstream.
If using a kernel with CONFIG_XFS_RT=y and we set the RHINHERIT flag on
a directory in a filesystem that does not have a realtime device and
create a new file in that directory, it gets marked as a real time file.
When data is written and a fsync is issued, the filesystem attempts to
flush a non-existent rt device during the fsync process.
This results in a crash dereferencing a null buftarg pointer in
xfs_blkdev_issue_flush():
BUG: unable to handle kernel NULL pointer dereference at
0000000000000008
IP: xfs_blkdev_issue_flush+0xd/0x20
.....
Call Trace:
xfs_file_fsync+0x188/0x1c0
vfs_fsync_range+0x3b/0xa0
do_fsync+0x3d/0x70
SyS_fsync+0x10/0x20
do_syscall_64+0x4d/0xb0
entry_SYSCALL64_slow_path+0x25/0x25
Setting RT inode flags does not require special privileges so any
unprivileged user can cause this oops to occur. To reproduce, confirm
kernel is compiled with CONFIG_XFS_RT=y and run:
# mkfs.xfs -f /dev/pmem0
# mount /dev/pmem0 /mnt/test
# mkdir /mnt/test/foo
# xfs_io -c 'chattr +t' /mnt/test/foo
# xfs_io -f -c 'pwrite 0 5m' -c fsync /mnt/test/foo/bar
Or just run xfstests with MKFS_OPTIONS="-d rtinherit=1" and wait.
Kernels built with CONFIG_XFS_RT=n are not exposed to this bug.
Fixes:
f538d4da8d52 ("[XFS] write barrier support")
Signed-off-by: Richard Wareing <rwareing@fb.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trond Myklebust [Sat, 9 Sep 2017 01:28:11 +0000 (21:28 -0400)]
NFS: Fix 2 use after free issues in the I/O code
commit
196639ebbe63a037fe9a80669140bd292d8bcd80 upstream.
The writeback code wants to send a commit after processing the pages,
which is why we want to delay releasing the struct path until after
that's done.
Also, the layout code expects that we do not free the inode before
we've put the layout segments in pnfs_writehdr_free() and
pnfs_readhdr_free()
Fixes:
919e3bd9a875 ("NFS: Ensure we commit after writeback is complete")
Fixes:
4714fb51fd03 ("nfs: remove pgio_header refcount, related cleanup")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Tue, 22 Aug 2017 10:36:17 +0000 (11:36 +0100)]
ARM: 8692/1: mm: abort uaccess retries upon fatal signal
commit
746a272e44141af24a02f6c9b0f65f4c4598ed42 upstream.
When there's a fatal signal pending, arm's do_page_fault()
implementation returns 0. The intent is that we'll return to the
faulting userspace instruction, delivering the signal on the way.
However, if we take a fatal signal during fixing up a uaccess, this
results in a return to the faulting kernel instruction, which will be
instantly retried, resulting in the same fault being taken forever. As
the task never reaches userspace, the signal is not delivered, and the
task is left unkillable. While the task is stuck in this state, it can
inhibit the forward progress of the system.
To avoid this, we must ensure that when a fatal signal is pending, we
apply any necessary fixup for a faulting kernel instruction. Thus we
will return to an error path, and it is up to that code to make forward
progress towards delivering the fatal signal.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Seri [Sat, 9 Sep 2017 21:15:59 +0000 (23:15 +0200)]
Bluetooth: Properly check L2CAP config option output buffer length
commit
e860d2c904d1a9f38a24eb44c9f34b8f915a6ea3 upstream.
Validate the output buffer length for L2CAP config requests and responses
to avoid overflowing the stack buffer used for building the option blocks.
Signed-off-by: Ben Seri <ben@armis.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Thu, 6 Jul 2017 10:34:40 +0000 (12:34 +0200)]
ALSA: msnd: Optimize / harden DSP and MIDI loops
commit
20e2b791796bd68816fa115f12be5320de2b8021 upstream.
The ISA msnd drivers have loops fetching the ring-buffer head, tail
and size values inside the loops. Such codes are inefficient and
fragile.
This patch optimizes it, and also adds the sanity check to avoid the
endless loops.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196131
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196133
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: grygorii tertychnyi <gtertych@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yang Shi [Thu, 10 Nov 2016 21:06:39 +0000 (13:06 -0800)]
locktorture: Fix potential memory leak with rw lock test
commit
f4dbba591945dc301c302672adefba9e2ec08dc5 upstream.
When running locktorture module with the below commands with kmemleak enabled:
$ modprobe locktorture torture_type=rw_lock_irq
$ rmmod locktorture
The below kmemleak got caught:
root@10:~# echo scan > /sys/kernel/debug/kmemleak
[ 323.197029] kmemleak: 2 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
root@10:~# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffffffc07592d500 (size 128):
comm "modprobe", pid 368, jiffies
4294924118 (age 205.824s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 c3 7b 02 00 00 00 00 00 .........{......
00 00 00 00 00 00 00 00 d7 9b 02 00 00 00 00 00 ................
backtrace:
[<
ffffff80081e5a88>] create_object+0x110/0x288
[<
ffffff80086c6078>] kmemleak_alloc+0x58/0xa0
[<
ffffff80081d5acc>] __kmalloc+0x234/0x318
[<
ffffff80006fa130>] 0xffffff80006fa130
[<
ffffff8008083ae4>] do_one_initcall+0x44/0x138
[<
ffffff800817e28c>] do_init_module+0x68/0x1cc
[<
ffffff800811c848>] load_module+0x1a68/0x22e0
[<
ffffff800811d340>] SyS_finit_module+0xe0/0xf0
[<
ffffff80080836f0>] el0_svc_naked+0x24/0x28
[<
ffffffffffffffff>] 0xffffffffffffffff
unreferenced object 0xffffffc07592d480 (size 128):
comm "modprobe", pid 368, jiffies
4294924118 (age 205.824s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 3b 6f 01 00 00 00 00 00 ........;o......
00 00 00 00 00 00 00 00 23 6a 01 00 00 00 00 00 ........#j......
backtrace:
[<
ffffff80081e5a88>] create_object+0x110/0x288
[<
ffffff80086c6078>] kmemleak_alloc+0x58/0xa0
[<
ffffff80081d5acc>] __kmalloc+0x234/0x318
[<
ffffff80006fa22c>] 0xffffff80006fa22c
[<
ffffff8008083ae4>] do_one_initcall+0x44/0x138
[<
ffffff800817e28c>] do_init_module+0x68/0x1cc
[<
ffffff800811c848>] load_module+0x1a68/0x22e0
[<
ffffff800811d340>] SyS_finit_module+0xe0/0xf0
[<
ffffff80080836f0>] el0_svc_naked+0x24/0x28
[<
ffffffffffffffff>] 0xffffffffffffffff
It is because cxt.lwsa and cxt.lrsa don't get freed in module_exit, so free
them in lock_torture_cleanup() and free writer_tasks if reader_tasks is
failed at memory allocation.
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Cc: 石洋 <yang.s@alibaba-inc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aleksa Sarai [Tue, 4 Jul 2017 11:49:06 +0000 (21:49 +1000)]
btrfs: resume qgroup rescan on rw remount
commit
6c6b5a39c4bf3dbd8cf629c9f5450e983c19dbb9 upstream.
Several distributions mount the "proper root" as ro during initrd and
then remount it as rw before pivot_root(2). Thus, if a rescan had been
aborted by a previous shutdown, the rescan would never be resumed.
This issue would manifest itself as several btrfs ioctl(2)s causing the
entire machine to hang when btrfs_qgroup_wait_for_completion was hit
(due to the fs_info->qgroup_rescan_running flag being set but the rescan
itself not being resumed). Notably, Docker's btrfs storage driver makes
regular use of BTRFS_QUOTA_CTL_DISABLE and BTRFS_IOC_QUOTA_RESCAN_WAIT
(causing this problem to be manifested on boot for some machines).
Cc: Jeff Mahoney <jeffm@suse.com>
Fixes:
b382a324b60f ("Btrfs: fix qgroup rescan resume on mount")
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Stultz [Tue, 17 Jan 2017 00:52:52 +0000 (16:52 -0800)]
drm/bridge: adv7511: Re-write the i2c address before EDID probing
commit
3587c856675c45809010c2cee5b21096f6e8e938 upstream.
I've found that by just turning the chip on and off via the
POWER_DOWN register, I end up getting i2c_transfer errors on
HiKey.
Investigating further, it turns out that some of the register
state in hardware is getting lost, as the device registers are
reset when the chip is powered down.
Thus this patch simply re-writes the i2c address to the
ADV7511_REG_EDID_I2C_ADDR register to ensure its properly set
before we try to read the EDID data.
Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-7-git-send-email-john.stultz@linaro.org
Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Stultz [Tue, 17 Jan 2017 00:52:48 +0000 (16:52 -0800)]
drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event()
commit
6d5104c5a6b56385426e15047050584794bb6254 upstream.
In chasing down a previous issue with EDID probing from calling
drm_helper_hpd_irq_event() from irq context, Laurent noticed
that the DRM documentation suggests that
drm_kms_helper_hotplug_event() should be used instead.
Thus this patch replaces drm_helper_hpd_irq_event() with
drm_kms_helper_hotplug_event(), which requires we update the
connector.status entry and only call _hotplug_event() when the
status changes.
Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Stultz [Tue, 17 Jan 2017 00:52:47 +0000 (16:52 -0800)]
drm/bridge: adv7511: Use work_struct to defer hotplug handing to out of irq context
commit
518cb7057a59b9441336d2e88a396d52b6ab0cce upstream.
I was recently seeing issues with EDID probing, where
the logic to wait for the EDID read bit to be set by the
IRQ wasn't happening and the code would time out and fail.
Digging deeper, I found this was due to the fact that
IRQs were disabled as we were running in IRQ context from
the HPD signal.
Thus this patch changes the logic to handle the HPD signal
via a work_struct so we can be out of irq context.
With this patch, the EDID probing on hotplug does not time
out.
Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Archit Taneja [Wed, 15 Jun 2016 10:50:45 +0000 (16:20 +0530)]
drm/bridge: adv7511: Fix mutex deadlock when interrupts are disabled
commit
f0bfcc22d9822947b0ad3095e8363eab5261864c upstream.
When the adv7511 i2c client doesn't have an interrupt line, we observe a
deadlock on caused by trying to lock drm device's mode_config.mutex twice
in the same context.
Here is the sequence that causes it:
ioctl DRM_IOCTL_MODE_GETCONNECTOR from userspace
drm_mode_getconnector (acquires mode_config mutex)
connector->fill_modes()
drm_helper_probe_single_connector_modes
connector_funcs->get_modes
adv7511_encoder_get_modes
adv7511_get_edid_block
adv7511_irq_process
drm_helper_hpd_irq_event (acquires mode_config mutex again)
In adv7511_irq_process, don't call drm_helper_hpd_irq_event when not
called from the interrupt handler. It doesn't serve any purpose there
anyway.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wolfram Sang [Mon, 4 Jan 2016 02:33:45 +0000 (03:33 +0100)]
drm: adv7511: really enable interrupts for EDID detection
commit
d0be8584b01160eb6f49e77f8e9c1da286bb4ffb upstream.
The interrupts for EDID_READY or DDC_ERROR were never enabled in this
driver, so reading EDID always timed out when chip was powered down and
interrupts were used. Fix this and also remove clearing the interrupt
flags, they are cleared in POWER_DOWN mode anyhow (unlike the interrupt
enable flags) according to docs and my tests.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Thong Ho <thong.ho.px@rvc.renesas.com>
Signed-off-by: Nhan Nguyen <nhan.nguyen.yb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Todd Poynor [Wed, 16 Aug 2017 04:48:43 +0000 (21:48 -0700)]
scsi: sg: recheck MMAP_IO request length with lock held
commit
8d26f491116feaa0b16de370b6a7ba40a40fa0b4 upstream.
Commit
1bc0eb044615 ("scsi: sg: protect accesses to 'reserved' page
array") adds needed concurrency protection for the "reserve" buffer.
Some checks that are initially made outside the lock are replicated once
the lock is taken to ensure the checks and resulting decisions are made
using consistent state.
The check that a request with flag SG_FLAG_MMAP_IO set fits in the
reserve buffer also needs to be performed again under the lock to ensure
the reserve buffer length compared against matches the value in effect
when the request is linked to the reserve buffer. An -ENOMEM should be
returned in this case, instead of switching over to an indirect buffer
as for non-MMAP_IO requests.
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Todd Poynor [Wed, 16 Aug 2017 05:41:08 +0000 (22:41 -0700)]
scsi: sg: protect against races between mmap() and SG_SET_RESERVED_SIZE
commit
6a8dadcca81fceff9976e8828cceb072873b7bd5 upstream.
Take f_mutex around mmap() processing to protect against races with the
SG_SET_RESERVED_SIZE ioctl. Ensure the reserve buffer length remains
consistent during the mapping operation, and set the "mmap called" flag
to prevent further changes to the reserved buffer size as an atomic
operation with the mapping.
[mkp: fixed whitespace]
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrey Korolyov [Thu, 10 Aug 2017 10:21:14 +0000 (13:21 +0300)]
cs5536: add support for IDE controller variant
commit
591b6bb605785c12a21e8b07a08a277065b655a5 upstream.
Several legacy devices such as Geode-based Cisco ASA appliances
and DB800 development board do possess CS5536 IDE controller
with different PCI id than existing one. Using pata_generic is
not always feasible as at least DB800 requires MSR quirk from
pata_cs5536 to be used with vendor firmware.
Signed-off-by: Andrey Korolyov <andrey@xdel.ru>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Hutchings [Sun, 3 Sep 2017 00:18:41 +0000 (01:18 +0100)]
workqueue: Fix flag collision
commit
fbf1c41fc0f4d3574ac2377245efd666c1fa3075 upstream.
Commit
0a94efb5acbb ("workqueue: implicit ordered attribute should be
overridable") introduced a __WQ_ORDERED_EXPLICIT flag but gave it the
same value as __WQ_LEGACY. I don't believe these were intended to
mean the same thing, so renumber __WQ_ORDERED_EXPLICIT.
Fixes:
0a94efb5acbb ("workqueue: implicit ordered attribute should be ...")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilia Mirkin [Thu, 10 Aug 2017 16:13:40 +0000 (12:13 -0400)]
drm/nouveau/pci/msi: disable MSI on big-endian platforms by default
commit
bc60c90f472b6e762ea96ef384072145adc8d4af upstream.
It appears that MSI does not work on either G5 PPC nor on a E5500-based
platform, where other hardware is reported to work fine with MSI.
Both tests were conducted with NV4x hardware, so perhaps other (or even
this) hardware can be made to work. It's still possible to force-enable
with config=NvMSI=1 on load.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Norris [Fri, 30 Jun 2017 01:23:54 +0000 (18:23 -0700)]
mwifiex: correct channel stat buffer overflows
commit
4b5dde2d6234ff5bc68e97e6901d1f2a0a7f3749 upstream.
mwifiex records information about various channels as it receives scan
information. It does this by appending to a buffer that was sized
to the max number of supported channels on any band, but there are
numerous problems:
(a) scans can return info from more than one band (e.g., both 2.4 and 5
GHz), so the determined "max" is not large enough
(b) some firmware appears to return multiple results for a given
channel, so the max *really* isn't large enough
(c) there is no bounds checking when stashing these stats, so problems
(a) and (b) can easily lead to buffer overflows
Let's patch this by setting a slightly-more-correct max (that accounts
for a combination of both 2.4G and 5G bands) and adding a bounds check
when writing to our statistics buffer.
Due to problem (b), we still might not properly report all known survey
information (e.g., with "iw <dev> survey dump"), since duplicate results
(or otherwise "larger than expected" results) will cause some
truncation. But that's a problem for a future bugfix.
(And because of this known deficiency, only log the excess at the WARN
level, since that isn't visible by default in this driver and would
otherwise be a bit too noisy.)
Fixes:
bf35443314ac ("mwifiex: channel statistics support for mwifiex")
Cc: Avinash Patil <patila@marvell.com>
Cc: Xinming Hu <huxm@marvell.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Edwin Török [Thu, 3 Aug 2017 09:30:06 +0000 (10:30 +0100)]
dlm: avoid double-free on error path in dlm_device_{register,unregister}
commit
55acdd926f6b21a5cdba23da98a48aedf19ac9c3 upstream.
Can be reproduced when running dlm_controld (tested on 4.4.x, 4.12.4):
# seq 1 100 | xargs -P0 -n1 dlm_tool join
# seq 1 100 | xargs -P0 -n1 dlm_tool leave
misc_register fails due to duplicate sysfs entry, which causes
dlm_device_register to free ls->ls_device.name.
In dlm_device_deregister the name was freed again, causing memory
corruption.
According to the comment in dlm_device_deregister the name should've been
set to NULL when registration fails,
so this patch does that.
sysfs: cannot create duplicate filename '/dev/char/10:1'
------------[ cut here ]------------
warning: cpu: 1 pid: 4450 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x56/0x70
modules linked in: msr rfcomm dlm ccm bnep dm_crypt uvcvideo
videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core videodev
btusb media btrtl btbcm btintel bluetooth ecdh_generic intel_rapl
x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm
snd_hda_codec_hdmi irqbypass crct10dif_pclmul crc32_pclmul
ghash_clmulni_intel thinkpad_acpi pcbc nvram snd_seq_midi
snd_seq_midi_event aesni_intel snd_hda_codec_realtek snd_hda_codec_generic
snd_rawmidi aes_x86_64 crypto_simd glue_helper snd_hda_intel snd_hda_codec
cryptd intel_cstate arc4 snd_hda_core snd_seq snd_seq_device snd_hwdep
iwldvm intel_rapl_perf mac80211 joydev input_leds iwlwifi serio_raw
cfg80211 snd_pcm shpchp snd_timer snd mac_hid mei_me lpc_ich mei soundcore
sunrpc parport_pc ppdev lp parport autofs4 i915 psmouse
e1000e ahci libahci i2c_algo_bit sdhci_pci ptp drm_kms_helper sdhci
pps_core syscopyarea sysfillrect sysimgblt fb_sys_fops drm wmi video
cpu: 1 pid: 4450 comm: dlm_test.exe not tainted 4.12.4-041204-generic
hardware name: lenovo 232425u/232425u, bios g2et82ww (2.02 ) 09/11/2012
task:
ffff96b0cbabe140 task.stack:
ffffb199027d0000
rip: 0010:sysfs_warn_dup+0x56/0x70
rsp: 0018:
ffffb199027d3c58 eflags:
00010282
rax:
0000000000000038 rbx:
ffff96b0e2c49158 rcx:
0000000000000006
rdx:
0000000000000000 rsi:
0000000000000086 rdi:
ffff96b15e24dcc0
rbp:
ffffb199027d3c70 r08:
0000000000000001 r09:
0000000000000721
r10:
ffffb199027d3c00 r11:
0000000000000721 r12:
ffffb199027d3cd1
r13:
ffff96b1592088f0 r14:
0000000000000001 r15:
ffffffffffffffef
fs:
00007f78069c0700(0000) gs:
ffff96b15e240000(0000)
knlgs:
0000000000000000
cs: 0010 ds: 0000 es: 0000 cr0:
0000000080050033
cr2:
000000178625ed28 cr3:
0000000091d3e000 cr4:
00000000001406e0
call trace:
sysfs_do_create_link_sd.isra.2+0x9e/0xb0
sysfs_create_link+0x25/0x40
device_add+0x5a9/0x640
device_create_groups_vargs+0xe0/0xf0
device_create_with_groups+0x3f/0x60
? snprintf+0x45/0x70
misc_register+0x140/0x180
device_write+0x6a8/0x790 [dlm]
__vfs_write+0x37/0x160
? apparmor_file_permission+0x1a/0x20
? security_file_permission+0x3b/0xc0
vfs_write+0xb5/0x1a0
sys_write+0x55/0xc0
? sys_fcntl+0x5d/0xb0
entry_syscall_64_fastpath+0x1e/0xa9
rip: 0033:0x7f78083454bd
rsp: 002b:
00007f78069bbd30 eflags:
00000293 orig_rax:
0000000000000001
rax:
ffffffffffffffda rbx:
0000000000000006 rcx:
00007f78083454bd
rdx:
000000000000009c rsi:
00007f78069bee00 rdi:
0000000000000005
rbp:
00007f77f8000a20 r08:
000000000000fcf0 r09:
0000000000000032
r10:
0000000000000024 r11:
0000000000000293 r12:
00007f78069bde00
r13:
00007f78069bee00 r14:
000000000000000a r15:
00007f78069bbd70
code: 85 c0 48 89 c3 74 12 b9 00 10 00 00 48 89 c2 31 f6 4c 89 ef e8 2c c8
ff ff 4c 89 e2 48 89 de 48 c7 c7 b0 8e 0c a8 e8 41 e8 ed ff <0f> ff 48 89
df e8 00 d5 f4 ff 5b 41 5c 41 5d 5d c3 66 0f 1f 84
---[ end trace
40412246357cc9e0 ]---
dlm:
59f24629-ae39-44e2-9030-
397ebc2eda26: leaving the lockspace group...
bug: unable to handle kernel null pointer dereference at
0000000000000001
ip: [<
ffffffff811a3b4a>] kmem_cache_alloc+0x7a/0x140
pgd 0
oops: 0000 [#1] smp
modules linked in: dlm 8021q garp mrp stp llc openvswitch nf_defrag_ipv6
nf_conntrack libcrc32c iptable_filter dm_multipath crc32_pclmul dm_mod
aesni_intel psmouse aes_x86_64 sg ablk_helper cryptd lrw gf128mul
glue_helper i2c_piix4 nls_utf8 tpm_tis tpm isofs nfsd auth_rpcgss
oid_registry nfs_acl lockd grace sunrpc xen_wdt ip_tables x_tables autofs4
hid_generic usbhid hid sr_mod cdrom sd_mod ata_generic pata_acpi 8139too
serio_raw ata_piix 8139cp mii uhci_hcd ehci_pci ehci_hcd libata
scsi_dh_rdac scsi_dh_hp_sw scsi_dh_emc scsi_dh_alua scsi_mod ipv6
cpu: 0 pid: 394 comm: systemd-udevd tainted: g w 4.4.0+0 #1
hardware name: xen hvm domu, bios 4.7.2-2.2 05/11/2017
task:
ffff880002410000 ti:
ffff88000243c000 task.ti:
ffff88000243c000
rip: e030:[<
ffffffff811a3b4a>] [<
ffffffff811a3b4a>]
kmem_cache_alloc+0x7a/0x140
rsp: e02b:
ffff88000243fd90 eflags:
00010202
rax:
0000000000000000 rbx:
ffff8800029864d0 rcx:
000000000007b36c
rdx:
000000000007b36b rsi:
00000000024000c0 rdi:
ffff880036801c00
rbp:
ffff88000243fdc0 r08:
0000000000018880 r09:
0000000000000054
r10:
000000000000004a r11:
ffff880034ace6c0 r12:
00000000024000c0
r13:
ffff880036801c00 r14:
0000000000000001 r15:
ffffffff8118dcc2
fs:
00007f0ab77548c0(0000) gs:
ffff880036e00000(0000) knlgs:
0000000000000000
cs: e033 ds: 0000 es: 0000 cr0:
0000000080050033
cr2:
0000000000000001 cr3:
000000000332d000 cr4:
0000000000040660
stack:
ffffffff8118dc90 ffff8800029864d0 0000000000000000 ffff88003430b0b0
ffff880034b78320 ffff88003430b0b0 ffff88000243fdf8 ffffffff8118dcc2
ffff8800349c6700 ffff8800029864d0 000000000000000b 00007f0ab7754b90
call trace:
[<
ffffffff8118dc90>] ? anon_vma_fork+0x60/0x140
[<
ffffffff8118dcc2>] anon_vma_fork+0x92/0x140
[<
ffffffff8107033e>] copy_process+0xcae/0x1a80
[<
ffffffff8107128b>] _do_fork+0x8b/0x2d0
[<
ffffffff81071579>] sys_clone+0x19/0x20
[<
ffffffff815a30ae>] entry_syscall_64_fastpath+0x12/0x71
] code: f6 75 1c 4c 89 fa 44 89 e6 4c 89 ef e8 a7 e4 00 00 41 f7 c4 00 80
00 00 49 89 c6 74 47 eb 32 49 63 45 20 48 8d 4a 01 4d 8b 45 00 <49> 8b 1c
06 4c 89 f0 65 49 0f c7 08 0f 94 c0 84 c0 74 ac 49 63
rip [<
ffffffff811a3b4a>] kmem_cache_alloc+0x7a/0x140
rsp <
ffff88000243fd90>
cr2:
0000000000000001
--[ end trace
70cb9fd1b164a0e8 ]--
Signed-off-by: Edwin Török <edvin.torok@citrix.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Tunin [Tue, 8 Aug 2017 11:09:02 +0000 (14:09 +0300)]
Bluetooth: Add support of 13d3:3494 RTL8723BE device
commit
a81d72d2002d6a932bd83022cbf8c442b1b97512 upstream.
T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3494 Rev= 2.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=
00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sun, 30 Jul 2017 08:02:19 +0000 (09:02 +0100)]
rtlwifi: rtl_pci_probe: Fix fail path of _rtl_pci_find_adapter
commit
fc81bab5eeb103711925d7510157cf5cd2b153f4 upstream.
_rtl_pci_find_adapter fail path will jump to label fail3 for
unsupported adapter types.
However, on course for fail3 there will be call rtl_deinit_core
before rtl_init_core.
For the inclusion of checking pci_iounmap this fail can be moved to
fail2.
Fixes
[ 4.492963] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 4.493067] IP: rtl_deinit_core+0x31/0x90 [rtlwifi]
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oscar Campos [Wed, 19 Jul 2017 00:20:36 +0000 (17:20 -0700)]
Input: trackpoint - assume 3 buttons when buttons detection fails
commit
293b915fd9bebf33cdc906516fb28d54649a25ac upstream.
Trackpoint buttons detection fails on ThinkPad 570 and 470 series,
this makes the middle button of the trackpoint to not being recogized.
As I don't believe there is any trackpoint with less than 3 buttons this
patch just assumes three buttons when the extended button information
read fails.
Signed-off-by: Oscar Campos <oscar.campos@member.fsf.org>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rakesh Pillai [Wed, 2 Aug 2017 10:33:37 +0000 (16:03 +0530)]
ath10k: fix memory leak in rx ring buffer allocation
commit
f35a7f91f66af528b3ee1921de16bea31d347ab0 upstream.
The rx ring buffers are added to a hash table if
firmware support full rx reorder. If the full rx
reorder support flag is not set before allocating
the rx ring buffers, none of the buffers are added
to the hash table.
There is a race condition between rx ring refill and
rx buffer replenish from napi poll. The interrupts are
enabled in hif start, before the rx ring is refilled during init.
We replenish buffers from napi poll due to the interrupts which
get enabled after hif start. Hence before the entire rx ring is
refilled during the init, the napi poll replenishes a few buffers
in steps of 100 buffers per attempt. During this rx ring replenish
from napi poll, the rx reorder flag has not been set due to which
the replenished buffers are not added to the hash table
Set the rx full reorder support flag before we allocate
the rx ring buffer to avoid the memory leak.
Signed-off-by: Rakesh Pillai <pillair@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Thu, 30 Jun 2016 13:11:31 +0000 (16:11 +0300)]
intel_th: pci: Add Cannon Lake PCH-LP support
commit
efb3669e14fe17d0ec4ecf57d0365039fe726f59 upstream.
This adds Intel(R) Trace Hub PCI ID for Cannon Lake PCH-LP.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Thu, 30 Jun 2016 13:11:13 +0000 (16:11 +0300)]
intel_th: pci: Add Cannon Lake PCH-H support
commit
84331e1390b6378a5129a3678c87a42c6f697d29 upstream.
This adds Intel(R) Trace Hub PCI ID for Cannon Lake PCH-H.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe JAILLET [Tue, 29 Aug 2017 19:23:49 +0000 (21:23 +0200)]
driver core: bus: Fix a potential double free
commit
0f9b011d3321ca1079c7a46c18cb1956fbdb7bcb upstream.
The .release function of driver_ktype is 'driver_release()'.
This function frees the container_of this kobject.
So, this memory must not be freed explicitly in the error handling path of
'bus_add_driver()'. Otherwise a double free will occur.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Fri, 18 Aug 2017 13:34:16 +0000 (14:34 +0100)]
staging/rts5208: fix incorrect shift to extract upper nybble
commit
34ff1bf4920471cff66775dc39537b15c5f0feff upstream.
The mask of sns_key_info1 suggests the upper nybble is being extracted
however the following shift of 8 bits is too large and always results in
0. Fix this by shifting only by 4 bits to correctly get the upper nybble.
Detected by CoverityScan, CID#142891 ("Operands don't affect result")
Fixes:
fa590c222fba ("staging: rts5208: add support for rts5208 and rts5288")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Douglas Anderson [Thu, 10 Aug 2017 22:42:22 +0000 (15:42 -0700)]
USB: core: Avoid race of async_completed() w/ usbdev_release()
commit
ed62ca2f4f51c17841ea39d98c0c409cb53a3e10 upstream.
While running reboot tests w/ a specific set of USB devices (and
slub_debug enabled), I found that once every few hours my device would
be crashed with a stack that looked like this:
[ 14.012445] BUG: spinlock bad magic on CPU#0, modprobe/2091
[ 14.012460] lock: 0xffffffc0cb055978, .magic:
ffffffc0, .owner: cryption contexts: %lu/%lu
[ 14.012460] /
1025536097, .owner_cpu: 0
[ 14.012466] CPU: 0 PID: 2091 Comm: modprobe Not tainted 4.4.79 #352
[ 14.012468] Hardware name: Google Kevin (DT)
[ 14.012471] Call trace:
[ 14.012483] [<....>] dump_backtrace+0x0/0x160
[ 14.012487] [<....>] show_stack+0x20/0x28
[ 14.012494] [<....>] dump_stack+0xb4/0xf0
[ 14.012500] [<....>] spin_dump+0x8c/0x98
[ 14.012504] [<....>] spin_bug+0x30/0x3c
[ 14.012508] [<....>] do_raw_spin_lock+0x40/0x164
[ 14.012515] [<....>] _raw_spin_lock_irqsave+0x64/0x74
[ 14.012521] [<....>] __wake_up+0x2c/0x60
[ 14.012528] [<....>] async_completed+0x2d0/0x300
[ 14.012534] [<....>] __usb_hcd_giveback_urb+0xc4/0x138
[ 14.012538] [<....>] usb_hcd_giveback_urb+0x54/0xf0
[ 14.012544] [<....>] xhci_irq+0x1314/0x1348
[ 14.012548] [<....>] usb_hcd_irq+0x40/0x50
[ 14.012553] [<....>] handle_irq_event_percpu+0x1b4/0x3f0
[ 14.012556] [<....>] handle_irq_event+0x4c/0x7c
[ 14.012561] [<....>] handle_fasteoi_irq+0x158/0x1c8
[ 14.012564] [<....>] generic_handle_irq+0x30/0x44
[ 14.012568] [<....>] __handle_domain_irq+0x90/0xbc
[ 14.012572] [<....>] gic_handle_irq+0xcc/0x18c
Investigation using kgdb() found that the wait queue that was passed
into wake_up() had been freed (it was filled with slub_debug poison).
I analyzed and instrumented the code and reproduced. My current
belief is that this is happening:
1. async_completed() is called (from IRQ). Moves "as" onto the
completed list.
2. On another CPU, proc_reapurbnonblock_compat() calls
async_getcompleted(). Blocks on spinlock.
3. async_completed() releases the lock; keeps running; gets blocked
midway through wake_up().
4. proc_reapurbnonblock_compat() => async_getcompleted() gets the
lock; removes "as" from completed list and frees it.
5. usbdev_release() is called. Frees "ps".
6. async_completed() finally continues running wake_up(). ...but
wake_up() has a pointer to the freed "ps".
The instrumentation that led me to believe this was based on adding
some trace_printk() calls in a select few functions and then using
kdb's "ftdump" at crash time. The trace follows (NOTE: in the trace
below I cheated a little bit and added a udelay(1000) in
async_completed() after releasing the spinlock because I wanted it to
trigger quicker):
<...>-2104 0d.h2 13759034us!: async_completed at start: as=
ffffffc0cc638200
mtpd-2055 3.... 13759356us : async_getcompleted before spin_lock_irqsave
mtpd-2055 3d..1 13759362us : async_getcompleted after list_del_init: as=
ffffffc0cc638200
mtpd-2055 3.... 13759371us+: proc_reapurbnonblock_compat: free_async(
ffffffc0cc638200)
mtpd-2055 3.... 13759422us+: async_getcompleted before spin_lock_irqsave
mtpd-2055 3.... 13759479us : usbdev_release at start: ps=
ffffffc0cc042080
mtpd-2055 3.... 13759487us : async_getcompleted before spin_lock_irqsave
mtpd-2055 3.... 13759497us!: usbdev_release after kfree(ps): ps=
ffffffc0cc042080
<...>-2104 0d.h2 13760294us : async_completed before wake_up(): as=
ffffffc0cc638200
To fix this problem we can just move the wake_up() under the ps->lock.
There should be no issues there that I'm aware of.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sandeep Singh [Thu, 24 Aug 2017 04:27:15 +0000 (09:57 +0530)]
usb:xhci:Fix regression when ATI chipsets detected
commit
e6b422b88b46353cf596e0db6dc0e39d50d90d6e upstream.
The following commit cause a regression on ATI chipsets.
'commit
e788787ef4f9 ("usb:xhci:Add quirk for Certain
failing HP keyboard on reset after resume")'
This causes pinfo->smbus_dev to be wrongly set to NULL on
systems with the ATI chipset that this function checks for first.
Added conditional check for AMD chipsets to avoid the overwriting
pinfo->smbus_dev.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Fixes:
e788787ef4f9 ("usb:xhci:Add quirk for Certain
failing HP keyboard on reset after resume")
cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Sandeep Singh <Sandeep.Singh@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Fleytman [Fri, 25 Aug 2017 07:38:35 +0000 (10:38 +0300)]
usb: Add device quirk for Logitech HD Pro Webcam C920-C
commit
a1279ef74eeeb5f627f091c71d80dd7ac766c99d upstream.
Commit
e0429362ab15
("usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e")
introduced quirk to workaround an issue with some Logitech webcams.
Apparently model C920-C has the same issue so applying
the same quirk as well.
See aforementioned commit message for detailed explanation of the problem.
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej S. Szmigiero [Tue, 29 Aug 2017 19:50:03 +0000 (21:50 +0200)]
USB: serial: option: add support for D-Link DWM-157 C1
commit
169e86546f5712179709de23cd64bbb15f199fab upstream.
This commit adds support (an ID, really) for D-Link DWM-157 hardware
version C1 USB modem to option driver.
According to manufacturer-provided Windows INF file the device has four
serial ports:
"D-Link HSPA+DataCard Diagnostics Interface" (interface 2; modem port),
"D-Link HSPA+DataCard NMEA Device" (interface 3),
"D-Link HSPA+DataCard Speech Port" (interface 4),
"D-Link HSPA+DataCard Debug Port" (interface 5).
usb-devices output:
T: Bus=05 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2001 ProdID=7d0e Rev=03.00
S: Manufacturer=D-Link,Inc
S: Product=D-Link DWM-157
C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kai-Heng Feng [Wed, 16 Aug 2017 02:53:20 +0000 (10:53 +0800)]
usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard
commit
de3af5bf259d7a0bfaac70441c8568ab5998d80c upstream.
Corsair Strafe RGB keyboard has trouble to initialize:
[ 1.679455] usb 3-6: new full-speed USB device number 4 using xhci_hcd
[ 6.871136] usb 3-6: unable to read config index 0 descriptor/all
[ 6.871138] usb 3-6: can't read configurations, error -110
[ 6.991019] usb 3-6: new full-speed USB device number 5 using xhci_hcd
[ 12.246642] usb 3-6: unable to read config index 0 descriptor/all
[ 12.246644] usb 3-6: can't read configurations, error -110
[ 12.366555] usb 3-6: new full-speed USB device number 6 using xhci_hcd
[ 17.622145] usb 3-6: unable to read config index 0 descriptor/all
[ 17.622147] usb 3-6: can't read configurations, error -110
[ 17.742093] usb 3-6: new full-speed USB device number 7 using xhci_hcd
[ 22.997715] usb 3-6: unable to read config index 0 descriptor/all
[ 22.997716] usb 3-6: can't read configurations, error -110
Although it may work after several times unpluging/pluging:
[ 68.195240] usb 3-6: new full-speed USB device number 11 using xhci_hcd
[ 68.337459] usb 3-6: New USB device found, idVendor=1b1c, idProduct=1b20
[ 68.337463] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 68.337466] usb 3-6: Product: Corsair STRAFE RGB Gaming Keyboard
[ 68.337468] usb 3-6: Manufacturer: Corsair
[ 68.337470] usb 3-6: SerialNumber:
0F013021AEB8046755A93ED3F5001941
Tried three quirks: USB_QUIRK_DELAY_INIT, USB_QUIRK_NO_LPM and
USB_QUIRK_DEVICE_QUALIFIER, user confirmed that USB_QUIRK_DELAY_INIT alone
can workaround this issue. Hence add the quirk for Corsair Strafe RGB.
BugLink: https://bugs.launchpad.net/bugs/1678477
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 7 Sep 2017 06:34:25 +0000 (08:34 +0200)]
Linux 4.4.87
Stephan Mueller [Wed, 16 Aug 2017 09:56:24 +0000 (11:56 +0200)]
crypto: algif_skcipher - only call put_page on referenced and used pages
commit
445a582738de6802669aeed9c33ca406c23c3b1f upstream.
For asynchronous operation, SGs are allocated without a page mapped to
them or with a page that is not used (ref-counted). If the SGL is freed,
the code must only call put_page for an SG if there was a page assigned
and ref-counted in the first place.
This fixes a kernel crash when using io_submit with more than one iocb
using the sendmsg and sendpage (vmsplice/splice) interface.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Nesterov [Fri, 1 Sep 2017 16:55:33 +0000 (18:55 +0200)]
epoll: fix race between ep_poll_callback(POLLFREE) and ep_free()/ep_remove()
commit
138e4ad67afd5c6c318b056b4d17c17f2c0ca5c0 upstream.
The race was introduced by me in commit
971316f0503a ("epoll:
ep_unregister_pollwait() can use the freed pwq->whead"). I did not
realize that nothing can protect eventpoll after ep_poll_callback() sets
->whead = NULL, only whead->lock can save us from the race with
ep_free() or ep_remove().
Move ->whead = NULL to the end of ep_poll_callback() and add the
necessary barriers.
TODO: cleanup the ewake/EPOLLEXCLUSIVE logic, it was confusing even
before this patch.
Hopefully this explains use-after-free reported by syzcaller:
BUG: KASAN: use-after-free in debug_spin_lock_before
...
_raw_spin_lock_irqsave+0x4a/0x60 kernel/locking/spinlock.c:159
ep_poll_callback+0x29f/0xff0 fs/eventpoll.c:1148
this is spin_lock(eventpoll->lock),
...
Freed by task 17774:
...
kfree+0xe8/0x2c0 mm/slub.c:3883
ep_free+0x22c/0x2a0 fs/eventpoll.c:865
Fixes:
971316f0503a ("epoll: ep_unregister_pollwait() can use the freed pwq->whead")
Reported-by: 范龙飞 <long7573@126.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suzuki K Poulose [Tue, 16 May 2017 09:34:54 +0000 (10:34 +0100)]
kvm: arm/arm64: Force reading uncached stage2 PGD
commit
2952a6070e07ebdd5896f1f5b861acad677caded upstream.
Make sure we don't use a cached value of the KVM stage2 PGD while
resetting the PGD.
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suzuki K Poulose [Wed, 3 May 2017 14:17:51 +0000 (15:17 +0100)]
kvm: arm/arm64: Fix race in resetting stage2 PGD
commit
6c0d706b563af732adb094c5bf807437e8963e84 upstream.
In kvm_free_stage2_pgd() we check the stage2 PGD before holding
the lock and proceed to take the lock if it is valid. And we unmap
the page tables, followed by releasing the lock. We reset the PGD
only after dropping this lock, which could cause a race condition
where another thread waiting on or even holding the lock, could
potentially see that the PGD is still valid and proceed to perform
a stage2 operation and later encounter a NULL PGD.
[223090.242280] Unable to handle kernel NULL pointer dereference at
virtual address
00000040
[223090.262330] PC is at unmap_stage2_range+0x8c/0x428
[223090.262332] LR is at kvm_unmap_hva_handler+0x2c/0x3c
[223090.262531] Call trace:
[223090.262533] [<
ffff0000080adb78>] unmap_stage2_range+0x8c/0x428
[223090.262535] [<
ffff0000080adf40>] kvm_unmap_hva_handler+0x2c/0x3c
[223090.262537] [<
ffff0000080ace2c>] handle_hva_to_gpa+0xb0/0x104
[223090.262539] [<
ffff0000080af988>] kvm_unmap_hva+0x5c/0xbc
[223090.262543] [<
ffff0000080a2478>]
kvm_mmu_notifier_invalidate_page+0x50/0x8c
[223090.262547] [<
ffff0000082274f8>]
__mmu_notifier_invalidate_page+0x5c/0x84
[223090.262551] [<
ffff00000820b700>] try_to_unmap_one+0x1d0/0x4a0
[223090.262553] [<
ffff00000820c5c8>] rmap_walk+0x1cc/0x2e0
[223090.262555] [<
ffff00000820c90c>] try_to_unmap+0x74/0xa4
[223090.262557] [<
ffff000008230ce4>] migrate_pages+0x31c/0x5ac
[223090.262561] [<
ffff0000081f869c>] compact_zone+0x3fc/0x7ac
[223090.262563] [<
ffff0000081f8ae0>] compact_zone_order+0x94/0xb0
[223090.262564] [<
ffff0000081f91c0>] try_to_compact_pages+0x108/0x290
[223090.262569] [<
ffff0000081d5108>] __alloc_pages_direct_compact+0x70/0x1ac
[223090.262571] [<
ffff0000081d64a0>] __alloc_pages_nodemask+0x434/0x9f4
[223090.262572] [<
ffff0000082256f0>] alloc_pages_vma+0x230/0x254
[223090.262574] [<
ffff000008235e5c>] do_huge_pmd_anonymous_page+0x114/0x538
[223090.262576] [<
ffff000008201bec>] handle_mm_fault+0xd40/0x17a4
[223090.262577] [<
ffff0000081fb324>] __get_user_pages+0x12c/0x36c
[223090.262578] [<
ffff0000081fb804>] get_user_pages_unlocked+0xa4/0x1b8
[223090.262579] [<
ffff0000080a3ce8>] __gfn_to_pfn_memslot+0x280/0x31c
[223090.262580] [<
ffff0000080a3dd0>] gfn_to_pfn_prot+0x4c/0x5c
[223090.262582] [<
ffff0000080af3f8>] kvm_handle_guest_abort+0x240/0x774
[223090.262584] [<
ffff0000080b2bac>] handle_exit+0x11c/0x1ac
[223090.262586] [<
ffff0000080ab99c>] kvm_arch_vcpu_ioctl_run+0x31c/0x648
[223090.262587] [<
ffff0000080a1d78>] kvm_vcpu_ioctl+0x378/0x768
[223090.262590] [<
ffff00000825df5c>] do_vfs_ioctl+0x324/0x5a4
[223090.262591] [<
ffff00000825e26c>] SyS_ioctl+0x90/0xa4
[223090.262595] [<
ffff000008085d84>] el0_svc_naked+0x38/0x3c
This patch moves the stage2 PGD manipulation under the lock.
Reported-by: Alexander Graf <agraf@suse.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiangliang.Yu [Wed, 16 Aug 2017 06:25:51 +0000 (14:25 +0800)]
drm/ttm: Fix accounting error when fail to get pages for pool
commit
9afae2719273fa1d406829bf3498f82dbdba71c7 upstream.
When fail to get needed page for pool, need to put allocated pages
into pool. But current code has a miscalculation of allocated pages,
correct it.
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vladis Dronov [Wed, 2 Aug 2017 17:50:14 +0000 (19:50 +0200)]
xfrm: policy: check policy direction value
commit
7bab09631c2a303f87a7eb7e3d69e888673b9b7e upstream.
The 'dir' parameter in xfrm_migrate() is a user-controlled byte which is used
as an array index. This can lead to an out-of-bound access, kernel lockup and
DoS. Add a check for the 'dir' value.
This fixes CVE-2017-11600.
References: https://bugzilla.redhat.com/show_bug.cgi?id=1474928
Fixes:
80c9abaabf42 ("[XFRM]: Extension for dynamic update of endpoint address(es)")
Reported-by: "bo Zhang" <zhangbo5891001@gmail.com>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cong Wang [Thu, 31 Aug 2017 14:47:43 +0000 (16:47 +0200)]
wl1251: add a missing spin_lock_init()
commit
f581a0dd744fe32b0a8805e279c59ec1ac676d60 upstream.
wl1251: add a missing spin_lock_init()
This fixes the following kernel warning:
[ 5668.771453] BUG: spinlock bad magic on CPU#0, kworker/u2:3/9745
[ 5668.771850] lock: 0xce63ef20, .magic:
00000000, .owner: <none>/-1,
.owner_cpu: 0
[ 5668.772277] CPU: 0 PID: 9745 Comm: kworker/u2:3 Tainted: G W
4.12.0-03002-gec979a4-dirty #40
[ 5668.772796] Hardware name: Nokia RX-51 board
[ 5668.773071] Workqueue: phy1 wl1251_irq_work
[ 5668.773345] [<
c010c9e4>] (unwind_backtrace) from [<
c010a274>]
(show_stack+0x10/0x14)
[ 5668.773803] [<
c010a274>] (show_stack) from [<
c01545a4>]
(do_raw_spin_lock+0x6c/0xa0)
[ 5668.774230] [<
c01545a4>] (do_raw_spin_lock) from [<
c06ca578>]
(_raw_spin_lock_irqsave+0x10/0x18)
[ 5668.774658] [<
c06ca578>] (_raw_spin_lock_irqsave) from [<
c048c010>]
(wl1251_op_tx+0x38/0x5c)
[ 5668.775115] [<
c048c010>] (wl1251_op_tx) from [<
c06a12e8>]
(ieee80211_tx_frags+0x188/0x1c0)
[ 5668.775543] [<
c06a12e8>] (ieee80211_tx_frags) from [<
c06a138c>]
(__ieee80211_tx+0x6c/0x130)
[ 5668.775970] [<
c06a138c>] (__ieee80211_tx) from [<
c06a3dbc>]
(ieee80211_tx+0xdc/0x104)
[ 5668.776367] [<
c06a3dbc>] (ieee80211_tx) from [<
c06a4af0>]
(__ieee80211_subif_start_xmit+0x454/0x8c8)
[ 5668.776824] [<
c06a4af0>] (__ieee80211_subif_start_xmit) from
[<
c06a4f94>] (ieee80211_subif_start_xmit+0x30/0x2fc)
[ 5668.777343] [<
c06a4f94>] (ieee80211_subif_start_xmit) from
[<
c0578848>] (dev_hard_start_xmit+0x80/0x118)
...
by adding the missing spin_lock_init().
Reported-by: Pavel Machek <pavel@ucw.cz>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve French [Sun, 27 Aug 2017 21:56:08 +0000 (16:56 -0500)]
CIFS: remove endian related sparse warning
commit
6e3c1529c39e92ed64ca41d53abadabbaa1d5393 upstream.
Recent patch had an endian warning ie
cifs: return ENAMETOOLONG for overlong names in cifs_open()/cifs_lookup()
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Shilovsky [Thu, 24 Aug 2017 22:16:40 +0000 (15:16 -0700)]
CIFS: Fix maximum SMB2 header size
commit
9e37b1784f2be9397a903307574ee565bbadfd75 upstream.
Currently the maximum size of SMB2/3 header is set incorrectly which
leads to hanging of directory listing operations on encrypted SMB3
connections. Fix this by setting the maximum size to 170 bytes that
is calculated as RFC1002 length field size (4) + transform header
size (52) + SMB2 header size (64) + create response size (56).
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Hutchings [Thu, 1 Oct 2015 00:35:55 +0000 (01:35 +0100)]
alpha: uapi: Add support for __SANE_USERSPACE_TYPES__
commit
cec80d82142ab25c71eee24b529cfeaf17c43062 upstream.
This fixes compiler errors in perf such as:
tests/attr.c: In function 'store_event':
tests/attr.c:66:27: error: format '%llu' expects argument of type 'long long unsigned int', but argument 6 has type '__u64 {aka long unsigned int}' [-Werror=format=]
snprintf(path, PATH_MAX, "%s/event-%d-%llu-%d", dir,
^
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Tested-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Waiman Long [Thu, 24 Aug 2017 16:04:29 +0000 (12:04 -0400)]
cpuset: Fix incorrect memory_pressure control file mapping
commit
1c08c22c874ac88799cab1f78c40f46110274915 upstream.
The memory_pressure control file was incorrectly set up without
a private value (0, by default). As a result, this control
file was treated like memory_migrate on read. By adding back the
FILE_MEMORY_PRESSURE private value, the correct memory pressure value
will be returned.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes:
7dbdb199d3bf ("cgroup: replace cftype->mode with CFTYPE_WORLD_WRITABLE")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tejun Heo [Mon, 28 Aug 2017 21:51:27 +0000 (14:51 -0700)]
cpumask: fix spurious cpumask_of_node() on non-NUMA multi-node configs
commit
b339752d054fb32863418452dff350a1086885b1 upstream.
When !NUMA, cpumask_of_node(@node) equals cpu_online_mask regardless of
@node. The assumption seems that if !NUMA, there shouldn't be more than
one node and thus reporting cpu_online_mask regardless of @node is
correct. However, that assumption was broken years ago to support
DISCONTIGMEM and whether a system has multiple nodes or not is
separately controlled by NEED_MULTIPLE_NODES.
This means that, on a system with !NUMA && NEED_MULTIPLE_NODES,
cpumask_of_node() will report cpu_online_mask for all possible nodes,
indicating that the CPUs are associated with multiple nodes which is an
impossible configuration.
This bug has been around forever but doesn't look like it has caused any
noticeable symptoms. However, it triggers a WARN recently added to
workqueue to verify NUMA affinity configuration.
Fix it by reporting empty cpumask on non-zero nodes if !NUMA.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yan, Zheng [Fri, 4 Aug 2017 03:22:31 +0000 (11:22 +0800)]
ceph: fix readpage from fscache
commit
dd2bc473482eedc60c29cf00ad12568ce40ce511 upstream.
ceph_readpage() unlocks page prematurely prematurely in the case
that page is reading from fscache. Caller of readpage expects that
page is uptodate when it get unlocked. So page shoule get locked
by completion callback of fscache_read_or_alloc_pages()
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Douthit [Mon, 7 Aug 2017 21:11:00 +0000 (17:11 -0400)]
i2c: ismt: Return EMSGSIZE for block reads with bogus length
commit
ba201c4f5ebe13d7819081756378777d8153f23e upstream.
Compare the number of bytes actually seen on the wire to the byte
count field returned by the slave device.
Previously we just overwrote the byte count returned by the slave
with the real byte count and let the caller figure out if the
message was sane.
Signed-off-by: Stephen Douthit <stephend@adiengineering.com>
Tested-by: Dan Priamo <danp@adiengineering.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Douthit [Mon, 7 Aug 2017 21:10:59 +0000 (17:10 -0400)]
i2c: ismt: Don't duplicate the receive length for block reads
commit
b6c159a9cb69c2cf0bf59d4e12c3a2da77e4d994 upstream.
According to Table 15-14 of the C2000 EDS (Intel doc #510524) the
rx data pointed to by the descriptor dptr contains the byte count.
desc->rxbytes reports all bytes read on the wire, including the
"byte count" byte. So if a device sends 4 bytes in response to a
block read, on the wire and in the DMA buffer we see:
count data1 data2 data3 data4
0x04 0xde 0xad 0xbe 0xef
That's what we want to return in data->block to the next level.
Instead we were actually prefixing that with desc->rxbytes:
bad
count count data1 data2 data3 data4
0x05 0x04 0xde 0xad 0xbe 0xef
This was discovered while developing a BMC solution relying on the
ipmi_ssif.c driver which was trying to interpret the bogus length
field as part of the IPMI response.
Signed-off-by: Stephen Douthit <stephend@adiengineering.com>
Tested-by: Dan Priamo <danp@adiengineering.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Hogan [Sun, 13 Aug 2017 04:36:09 +0000 (21:36 -0700)]
irqchip: mips-gic: SYNC after enabling GIC region
commit
2c0e8382386f618c85d20cb05e7cf7df8cdd382c upstream.
A SYNC is required between enabling the GIC region and actually trying
to use it, even if the first access is a read, otherwise its possible
depending on the timing (and in my case depending on the precise
alignment of certain kernel code) to hit CM bus errors on that first
access.
Add the SYNC straight after setting the GIC base.
[paul.burton@imgtec.com:
Changes later in this series increase our likelihood of hitting this
by reducing the amount of code that runs between enabling the GIC &
accessing it.]
Fixes:
a7057270c280 ("irqchip: mips-gic: Add device-tree support")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17019/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 2 Sep 2017 05:07:05 +0000 (07:07 +0200)]
Linux 4.4.86
Greg Kroah-Hartman [Thu, 31 Aug 2017 06:30:43 +0000 (08:30 +0200)]
drm/i915: fix compiler warning in drivers/gpu/drm/i915/intel_uncore.c
When building with gcc-7, the following warning happens:
drivers/gpu/drm/i915/intel_uncore.c: In function ‘hsw_unclaimed_reg_detect’:
drivers/gpu/drm/i915/intel_uncore.c:638:36: warning: decrement of a boolean expression [-Wbool-operation]
i915.mmio_debug = mmio_debug_once--;
^~
As it's really not wise to -- on a boolean value.
Commit
7571494004d8 ("drm/i915: Do one shot unclaimed mmio detection
less frequently") which showed up in 4.6-rc1 does solve this issue, by
rewriting the mmio detection logic, but that isn't really good to
backport to 4.4-stable, so just fix up the obvious logic here to do the
right thing.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <przanoni@gmail.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hannes Reinecke [Mon, 24 Apr 2017 08:26:36 +0000 (10:26 +0200)]
scsi: sg: reset 'res_in_use' after unlinking reserved array
commit
e791ce27c3f6a1d3c746fd6a8f8e36c9540ec6f9 upstream.
Once the reserved page array is unused we can reset the 'res_in_use'
state; here we can do a lazy update without holding the mutex as we only
need to check against concurrent access, not concurrent release.
[mkp: checkpatch]
Fixes:
1bc0eb044615 ("scsi: sg: protect accesses to 'reserved' page array")
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hannes Reinecke [Fri, 7 Apr 2017 07:34:14 +0000 (09:34 +0200)]
scsi: sg: protect accesses to 'reserved' page array
commit
1bc0eb0446158cc76562176b80623aa119afee5b upstream.
The 'reserved' page array is used as a short-cut for mapping data,
saving us to allocate pages per request. However, the 'reserved' array
is only capable of holding one request, so this patch introduces a mutex
for protect 'sg_fd' against concurrent accesses.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[toddpoynor@google.com: backport to 3.18-4.9, fixup for bad ioctl
SG_SET_FORCE_LOW_DMA code removed in later versions and not modified by
the original patch.]
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Martin [Fri, 18 Aug 2017 15:57:01 +0000 (16:57 +0100)]
arm64: fpsimd: Prevent registers leaking across exec
commit
096622104e14d8a1db4860bd557717067a0515d2 upstream.
There are some tricky dependencies between the different stages of
flushing the FPSIMD register state during exec, and these can race
with context switch in ways that can cause the old task's regs to
leak across. In particular, a context switch during the memset() can
cause some of the task's old FPSIMD registers to reappear.
Disabling preemption for this small window would be no big deal for
performance: preemption is already disabled for similar scenarios
like updating the FPSIMD registers in sigreturn.
So, instead of rearranging things in ways that might swap existing
subtle bugs for new ones, this patch just disables preemption
around the FPSIMD state flushing so that races of this type can't
occur here. This brings fpsimd_flush_thread() into line with other
code paths.
Fixes:
674c242c9323 ("arm64: flush FP/SIMD state correctly after execve()")
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Wed, 19 Jul 2017 12:53:02 +0000 (14:53 +0200)]
x86/io: Add "memory" clobber to insb/insw/insl/outsb/outsw/outsl
commit
7206f9bf108eb9513d170c73f151367a1bdf3dbf upstream.
The x86 version of insb/insw/insl uses an inline assembly that does
not have the target buffer listed as an output. This can confuse
the compiler, leading it to think that a subsequent access of the
buffer is uninitialized:
drivers/net/wireless/wl3501_cs.c: In function ‘wl3501_mgmt_scan_confirm’:
drivers/net/wireless/wl3501_cs.c:665:9: error: ‘sig.status’ is used uninitialized in this function [-Werror=uninitialized]
drivers/net/wireless/wl3501_cs.c:668:12: error: ‘sig.cap_info’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/net/sb1000.c: In function 'sb1000_rx':
drivers/net/sb1000.c:775:9: error: 'st[0]' is used uninitialized in this function [-Werror=uninitialized]
drivers/net/sb1000.c:776:10: error: 'st[1]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/net/sb1000.c:784:11: error: 'st[1]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
I tried to mark the exact input buffer as an output here, but couldn't
figure it out. As suggested by Linus, marking all memory as clobbered
however is good enough too. For the outs operations, I also add the
memory clobber, to force the input to be written to local variables.
This is probably already guaranteed by the "asm volatile", but it can't
hurt to do this for symmetry.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Link: http://lkml.kernel.org/r/20170719125310.2487451-5-arnd@arndb.de
Link: https://lkml.org/lkml/2017/7/12/605
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Tue, 11 Jul 2017 14:19:22 +0000 (15:19 +0100)]
arm64: mm: abort uaccess retries upon fatal signal
commit
289d07a2dc6c6b6f3e4b8a62669320d99dbe6c3d upstream.
When there's a fatal signal pending, arm64's do_page_fault()
implementation returns 0. The intent is that we'll return to the
faulting userspace instruction, delivering the signal on the way.
However, if we take a fatal signal during fixing up a uaccess, this
results in a return to the faulting kernel instruction, which will be
instantly retried, resulting in the same fault being taken forever. As
the task never reaches userspace, the signal is not delivered, and the
task is left unkillable. While the task is stuck in this state, it can
inhibit the forward progress of the system.
To avoid this, we must ensure that when a fatal signal is pending, we
apply any necessary fixup for a faulting kernel instruction. Thus we
will return to an error path, and it is up to that code to make forward
progress towards delivering the fatal signal.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Laura Abbott <labbott@redhat.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Tested-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: James Morse <james.morse@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Smart [Thu, 31 Mar 2016 21:12:31 +0000 (14:12 -0700)]
lpfc: Fix Device discovery failures during switch reboot test.
commit
342b59caa66240b670285d519fdfe2c44289b516 upstream.
When the switch is rebooted, the lpfc driver fails to log
into the fabric, and Unexpected timeout message is seen.
Fix: Do not issue RegVFI if the FLOGI was internally aborted.
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com>
Signed-off-by: James Smart <james.smart@avagotech.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Slaby [Fri, 14 Oct 2016 09:23:09 +0000 (11:23 +0200)]
p54: memset(0) whole array
commit
6f17581788206444cbbcdbc107498f85e9765e3d upstream.
gcc 7 complains:
drivers/net/wireless/intersil/p54/fwio.c: In function 'p54_scan':
drivers/net/wireless/intersil/p54/fwio.c:491:4: warning: 'memset' used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size]
Fix that by passing the correct size to memset.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Christian Lamparter <chunkeey@googlemail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Javier González [Thu, 7 Jul 2016 07:54:09 +0000 (09:54 +0200)]
lightnvm: initialize ppa_addr in dev_to_generic_addr()
commit
5389a1dfb39786df08d4f6a482bd2734b1b50e33 upstream.
The ->reserved bit is not initialized when allocated on stack.
This may lead targets to misinterpret the PPA as cached.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Liska [Fri, 12 May 2017 22:46:35 +0000 (15:46 -0700)]
gcov: support GCC 7.1
commit
05384213436ab690c46d9dfec706b80ef8d671ab upstream.
Starting from GCC 7.1, __gcov_exit is a new symbol expected to be
implemented in a profiling runtime.
[akpm@linux-foundation.org: coding-style fixes]
[mliska@suse.cz: v2]
Link: http://lkml.kernel.org/r/e63a3c59-0149-c97e-4084-20ca8f146b26@suse.cz
Link: http://lkml.kernel.org/r/8c4084fa-3885-29fe-5fc4-0d4ca199c785@suse.cz
Signed-off-by: Martin Liska <mliska@suse.cz>
Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Meier [Thu, 14 Jul 2016 19:07:26 +0000 (12:07 -0700)]
gcov: add support for gcc version >= 6
commit
d02038f972538b93011d78c068f44514fbde0a8c upstream.
Link: http://lkml.kernel.org/r/20160701130914.GA23225@styxhp
Signed-off-by: Florian Meier <Florian.Meier@informatik.uni-erlangen.de>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Tested-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wolfram Sang [Sun, 5 Jun 2016 09:41:42 +0000 (11:41 +0200)]
i2c: jz4780: drop superfluous init
commit
27bfeb5a0619554d9734fb39e14f0e80fa7c342c upstream.
David reported that the length for memset was incorrect (element sizes
were not taken into account). Then I saw that we are clearing kzalloced
memory, so we can simply drop this code.
Reported-by: David Binderman <dcb314@hotmail.com>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Tue, 19 Jan 2016 00:05:28 +0000 (00:05 +0000)]
btrfs: remove duplicate const specifier
commit
fb75d857a31d600cc0c37b8c7d914014f7fa3f9a upstream.
duplicate const is redundant so remove it
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Thu, 12 May 2016 16:04:16 +0000 (18:04 +0200)]
ALSA: au88x0: Fix zero clear of stream->resources
commit
639db596165746ca87bbcb56559b094fd9042890 upstream.
There are a few calls of memset() to stream->resources, but they all
are called in a wrong size, sizeof(unsigned char) * VORTEX_RESOURCE_LAST,
while this field is a u32 array. This may leave the memories not
zero-cleared.
Fix it by replacing them with a simpler sizeof(stream->resources)
instead.
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Fri, 18 Nov 2016 16:14:01 +0000 (17:14 +0100)]
scsi: isci: avoid array subscript warning
commit
5cfa2a3c7342bd0b50716c8bb32ee491af43c785 upstream.
I'm getting a new warning with gcc-7:
isci/remote_node_context.c: In function 'sci_remote_node_context_destruct':
isci/remote_node_context.c:69:16: error: array subscript is above array bounds [-Werror=array-bounds]
This is odd, since we clearly cover all values for enum
scis_sds_remote_node_context_states here. Anyway, checking for an array
overflow can't harm and it makes the warning go away.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 30 Aug 2017 08:19:42 +0000 (10:19 +0200)]
Linux 4.4.85
projects / profile / common / platform / kernel / linux-artik7.git / log